linux_dsm_epyc7002/drivers/gpu/drm/imx/ipuv3-crtc.c

519 lines
12 KiB
C
Raw Normal View History

/*
* i.MX IPUv3 Graphics driver
*
* Copyright (C) 2011 Sascha Hauer, Pengutronix
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/component.h>
#include <linux/module.h>
#include <linux/export.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <drm/drmP.h>
#include <drm/drm_crtc_helper.h>
#include <linux/fb.h>
#include <linux/clk.h>
#include <linux/errno.h>
#include <drm/drm_gem_cma_helper.h>
#include <drm/drm_fb_cma_helper.h>
#include <video/imx-ipu-v3.h>
#include "imx-drm.h"
#include "ipuv3-plane.h"
#define DRIVER_DESC "i.MX IPUv3 Graphics"
struct ipu_crtc {
struct device *dev;
struct drm_crtc base;
struct imx_drm_crtc *imx_crtc;
/* plane[0] is the full plane, plane[1] is the partial plane */
struct ipu_plane *plane[2];
struct ipu_dc *dc;
struct ipu_di *di;
int enabled;
struct drm_pending_vblank_event *page_flip_event;
struct drm_framebuffer *newfb;
int irq;
u32 interface_pix_fmt;
int di_hsync_pin;
int di_vsync_pin;
};
#define to_ipu_crtc(x) container_of(x, struct ipu_crtc, base)
static void ipu_fb_enable(struct ipu_crtc *ipu_crtc)
{
struct ipu_soc *ipu = dev_get_drvdata(ipu_crtc->dev->parent);
if (ipu_crtc->enabled)
return;
ipu_dc_enable(ipu);
ipu_plane_enable(ipu_crtc->plane[0]);
/* Start DC channel and DI after IDMAC */
ipu_dc_enable_channel(ipu_crtc->dc);
ipu_di_enable(ipu_crtc->di);
ipu_crtc->enabled = 1;
}
static void ipu_fb_disable(struct ipu_crtc *ipu_crtc)
{
struct ipu_soc *ipu = dev_get_drvdata(ipu_crtc->dev->parent);
if (!ipu_crtc->enabled)
return;
/* Stop DC channel and DI before IDMAC */
ipu_dc_disable_channel(ipu_crtc->dc);
ipu_di_disable(ipu_crtc->di);
ipu_plane_disable(ipu_crtc->plane[0]);
ipu_dc_disable(ipu);
ipu_crtc->enabled = 0;
}
static void ipu_crtc_dpms(struct drm_crtc *crtc, int mode)
{
struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc);
dev_dbg(ipu_crtc->dev, "%s mode: %d\n", __func__, mode);
switch (mode) {
case DRM_MODE_DPMS_ON:
ipu_fb_enable(ipu_crtc);
break;
case DRM_MODE_DPMS_STANDBY:
case DRM_MODE_DPMS_SUSPEND:
case DRM_MODE_DPMS_OFF:
ipu_fb_disable(ipu_crtc);
break;
}
}
static int ipu_page_flip(struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_pending_vblank_event *event,
uint32_t page_flip_flags)
{
struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc);
int ret;
if (ipu_crtc->newfb)
return -EBUSY;
ret = imx_drm_crtc_vblank_get(ipu_crtc->imx_crtc);
if (ret) {
dev_dbg(ipu_crtc->dev, "failed to acquire vblank counter\n");
list_del(&event->base.link);
return ret;
}
ipu_crtc->newfb = fb;
ipu_crtc->page_flip_event = event;
crtc->primary->fb = fb;
return 0;
}
static const struct drm_crtc_funcs ipu_crtc_funcs = {
.set_config = drm_crtc_helper_set_config,
.destroy = drm_crtc_cleanup,
.page_flip = ipu_page_flip,
};
static int ipu_crtc_mode_set(struct drm_crtc *crtc,
struct drm_display_mode *orig_mode,
struct drm_display_mode *mode,
int x, int y,
struct drm_framebuffer *old_fb)
{
struct drm_device *dev = crtc->dev;
struct drm_encoder *encoder;
struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc);
struct ipu_di_signal_cfg sig_cfg = {};
unsigned long encoder_types = 0;
u32 out_pixel_fmt;
int ret;
dev_dbg(ipu_crtc->dev, "%s: mode->hdisplay: %d\n", __func__,
mode->hdisplay);
dev_dbg(ipu_crtc->dev, "%s: mode->vdisplay: %d\n", __func__,
mode->vdisplay);
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
if (encoder->crtc == crtc)
encoder_types |= BIT(encoder->encoder_type);
dev_dbg(ipu_crtc->dev, "%s: attached to encoder types 0x%lx\n",
__func__, encoder_types);
/*
* If we have DAC or LDB, then we need the IPU DI clock to be
* the same as the LDB DI clock. For TVDAC, derive the IPU DI
* clock from 27 MHz TVE_DI clock, but allow to divide it.
*/
if (encoder_types & (BIT(DRM_MODE_ENCODER_DAC) |
BIT(DRM_MODE_ENCODER_LVDS)))
sig_cfg.clkflags = IPU_DI_CLKMODE_SYNC | IPU_DI_CLKMODE_EXT;
else if (encoder_types & BIT(DRM_MODE_ENCODER_TVDAC))
sig_cfg.clkflags = IPU_DI_CLKMODE_EXT;
else
sig_cfg.clkflags = 0;
out_pixel_fmt = ipu_crtc->interface_pix_fmt;
sig_cfg.enable_pol = 1;
sig_cfg.clk_pol = 0;
sig_cfg.pixel_fmt = out_pixel_fmt;
sig_cfg.v_to_h_sync = 0;
sig_cfg.hsync_pin = ipu_crtc->di_hsync_pin;
sig_cfg.vsync_pin = ipu_crtc->di_vsync_pin;
drm_display_mode_to_videomode(mode, &sig_cfg.mode);
ret = ipu_dc_init_sync(ipu_crtc->dc, ipu_crtc->di,
mode->flags & DRM_MODE_FLAG_INTERLACE,
out_pixel_fmt, mode->hdisplay);
if (ret) {
dev_err(ipu_crtc->dev,
"initializing display controller failed with %d\n",
ret);
return ret;
}
ret = ipu_di_init_sync_panel(ipu_crtc->di, &sig_cfg);
if (ret) {
dev_err(ipu_crtc->dev,
"initializing panel failed with %d\n", ret);
return ret;
}
return ipu_plane_mode_set(ipu_crtc->plane[0], crtc, mode,
crtc->primary->fb,
0, 0, mode->hdisplay, mode->vdisplay,
x, y, mode->hdisplay, mode->vdisplay,
mode->flags & DRM_MODE_FLAG_INTERLACE);
}
static void ipu_crtc_handle_pageflip(struct ipu_crtc *ipu_crtc)
{
unsigned long flags;
struct drm_device *drm = ipu_crtc->base.dev;
spin_lock_irqsave(&drm->event_lock, flags);
if (ipu_crtc->page_flip_event)
drm_send_vblank_event(drm, -1, ipu_crtc->page_flip_event);
ipu_crtc->page_flip_event = NULL;
imx_drm_crtc_vblank_put(ipu_crtc->imx_crtc);
spin_unlock_irqrestore(&drm->event_lock, flags);
}
static irqreturn_t ipu_irq_handler(int irq, void *dev_id)
{
struct ipu_crtc *ipu_crtc = dev_id;
imx_drm_handle_vblank(ipu_crtc->imx_crtc);
if (ipu_crtc->newfb) {
struct ipu_plane *plane = ipu_crtc->plane[0];
ipu_crtc->newfb = NULL;
ipu_plane_set_base(plane, ipu_crtc->base.primary->fb,
plane->x, plane->y);
ipu_crtc_handle_pageflip(ipu_crtc);
}
return IRQ_HANDLED;
}
static bool ipu_crtc_mode_fixup(struct drm_crtc *crtc,
const struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc);
struct videomode vm;
int ret;
drm_display_mode_to_videomode(adjusted_mode, &vm);
ret = ipu_di_adjust_videomode(ipu_crtc->di, &vm);
if (ret)
return false;
drm_display_mode_from_videomode(&vm, adjusted_mode);
return true;
}
static void ipu_crtc_prepare(struct drm_crtc *crtc)
{
struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc);
ipu_fb_disable(ipu_crtc);
}
static void ipu_crtc_commit(struct drm_crtc *crtc)
{
struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc);
ipu_fb_enable(ipu_crtc);
}
static struct drm_crtc_helper_funcs ipu_helper_funcs = {
.dpms = ipu_crtc_dpms,
.mode_fixup = ipu_crtc_mode_fixup,
.mode_set = ipu_crtc_mode_set,
.prepare = ipu_crtc_prepare,
.commit = ipu_crtc_commit,
};
static int ipu_enable_vblank(struct drm_crtc *crtc)
{
return 0;
}
static void ipu_disable_vblank(struct drm_crtc *crtc)
{
struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc);
ipu_crtc->page_flip_event = NULL;
ipu_crtc->newfb = NULL;
}
static int ipu_set_interface_pix_fmt(struct drm_crtc *crtc,
u32 pixfmt, int hsync_pin, int vsync_pin)
{
struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc);
ipu_crtc->interface_pix_fmt = pixfmt;
ipu_crtc->di_hsync_pin = hsync_pin;
ipu_crtc->di_vsync_pin = vsync_pin;
return 0;
}
static const struct imx_drm_crtc_helper_funcs ipu_crtc_helper_funcs = {
.enable_vblank = ipu_enable_vblank,
.disable_vblank = ipu_disable_vblank,
.set_interface_pix_fmt = ipu_set_interface_pix_fmt,
.crtc_funcs = &ipu_crtc_funcs,
.crtc_helper_funcs = &ipu_helper_funcs,
};
static void ipu_put_resources(struct ipu_crtc *ipu_crtc)
{
if (!IS_ERR_OR_NULL(ipu_crtc->dc))
ipu_dc_put(ipu_crtc->dc);
if (!IS_ERR_OR_NULL(ipu_crtc->di))
ipu_di_put(ipu_crtc->di);
}
static int ipu_get_resources(struct ipu_crtc *ipu_crtc,
struct ipu_client_platformdata *pdata)
{
struct ipu_soc *ipu = dev_get_drvdata(ipu_crtc->dev->parent);
int ret;
ipu_crtc->dc = ipu_dc_get(ipu, pdata->dc);
if (IS_ERR(ipu_crtc->dc)) {
ret = PTR_ERR(ipu_crtc->dc);
goto err_out;
}
ipu_crtc->di = ipu_di_get(ipu, pdata->di);
if (IS_ERR(ipu_crtc->di)) {
ret = PTR_ERR(ipu_crtc->di);
goto err_out;
}
return 0;
err_out:
ipu_put_resources(ipu_crtc);
return ret;
}
static int ipu_crtc_init(struct ipu_crtc *ipu_crtc,
struct ipu_client_platformdata *pdata, struct drm_device *drm)
{
struct ipu_soc *ipu = dev_get_drvdata(ipu_crtc->dev->parent);
int dp = -EINVAL;
int ret;
int id;
ret = ipu_get_resources(ipu_crtc, pdata);
if (ret) {
dev_err(ipu_crtc->dev, "getting resources failed with %d.\n",
ret);
return ret;
}
staging: imx-drm-core: Use OF graph to find components and connections between encoder and crtcs This patch adds support to find the involved components connected to the IPU display interface ports using the OF graph bindings documented in Documentation/devicetree/bindings/media/video-interfaces.txt. It makes use of the of_graph (formerly v4l2_of) parsing helpers and thus depends on the patch that moves those out to drivers/of. Each display interface needs to have an associated port node in the device tree. We can associate this node with the crtc platform device and use it to find the crtc corresponding to a given port node instead of using a combination of parent device node and id number, as before. Explicitly converting the void* cookie to the port device tree node allows to get rid of the ipu_id and di_id fields. The multiplexer setting on i.MX6 now can be obtained from the port id (reg property) in the device tree. The imx-drm node now needs a ports property that contains phandles to each of the IPU display interface port nodes. From there, all attached encoders are scanned and enabled encoders are added to a waiting list. The bind order makes sure that once all components are probed, crtcs are bound before encoders, so that imx_drm_encoder_parse_of can be called from the encoder bind callbacks. For parsing the OF graph, temporary copies of the V4L2 OF graph helpers are used, that can be removed again once those are available at a generic place. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-03-05 16:20:52 +07:00
ret = imx_drm_add_crtc(drm, &ipu_crtc->base, &ipu_crtc->imx_crtc,
&ipu_crtc_helper_funcs, ipu_crtc->dev->of_node);
if (ret) {
dev_err(ipu_crtc->dev, "adding crtc failed with %d.\n", ret);
goto err_put_resources;
}
if (pdata->dp >= 0)
dp = IPU_DP_FLOW_SYNC_BG;
id = imx_drm_crtc_id(ipu_crtc->imx_crtc);
ipu_crtc->plane[0] = ipu_plane_init(ipu_crtc->base.dev, ipu,
pdata->dma[0], dp, BIT(id), true);
ret = ipu_plane_get_resources(ipu_crtc->plane[0]);
if (ret) {
dev_err(ipu_crtc->dev, "getting plane 0 resources failed with %d.\n",
ret);
goto err_remove_crtc;
}
/* If this crtc is using the DP, add an overlay plane */
if (pdata->dp >= 0 && pdata->dma[1] > 0) {
ipu_crtc->plane[1] = ipu_plane_init(ipu_crtc->base.dev, ipu,
pdata->dma[1],
IPU_DP_FLOW_SYNC_FG,
BIT(id), false);
if (IS_ERR(ipu_crtc->plane[1]))
ipu_crtc->plane[1] = NULL;
}
ipu_crtc->irq = ipu_plane_irq(ipu_crtc->plane[0]);
ret = devm_request_irq(ipu_crtc->dev, ipu_crtc->irq, ipu_irq_handler, 0,
"imx_drm", ipu_crtc);
if (ret < 0) {
dev_err(ipu_crtc->dev, "irq request failed with %d.\n", ret);
goto err_put_plane_res;
}
return 0;
err_put_plane_res:
ipu_plane_put_resources(ipu_crtc->plane[0]);
err_remove_crtc:
imx_drm_remove_crtc(ipu_crtc->imx_crtc);
err_put_resources:
ipu_put_resources(ipu_crtc);
return ret;
}
staging: imx-drm-core: Use OF graph to find components and connections between encoder and crtcs This patch adds support to find the involved components connected to the IPU display interface ports using the OF graph bindings documented in Documentation/devicetree/bindings/media/video-interfaces.txt. It makes use of the of_graph (formerly v4l2_of) parsing helpers and thus depends on the patch that moves those out to drivers/of. Each display interface needs to have an associated port node in the device tree. We can associate this node with the crtc platform device and use it to find the crtc corresponding to a given port node instead of using a combination of parent device node and id number, as before. Explicitly converting the void* cookie to the port device tree node allows to get rid of the ipu_id and di_id fields. The multiplexer setting on i.MX6 now can be obtained from the port id (reg property) in the device tree. The imx-drm node now needs a ports property that contains phandles to each of the IPU display interface port nodes. From there, all attached encoders are scanned and enabled encoders are added to a waiting list. The bind order makes sure that once all components are probed, crtcs are bound before encoders, so that imx_drm_encoder_parse_of can be called from the encoder bind callbacks. For parsing the OF graph, temporary copies of the V4L2 OF graph helpers are used, that can be removed again once those are available at a generic place. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-03-05 16:20:52 +07:00
static struct device_node *ipu_drm_get_port_by_id(struct device_node *parent,
int port_id)
{
struct device_node *port;
int id, ret;
port = of_get_child_by_name(parent, "port");
while (port) {
ret = of_property_read_u32(port, "reg", &id);
if (!ret && id == port_id)
return port;
do {
port = of_get_next_child(parent, port);
if (!port)
return NULL;
} while (of_node_cmp(port->name, "port"));
}
return NULL;
}
static int ipu_drm_bind(struct device *dev, struct device *master, void *data)
{
struct ipu_client_platformdata *pdata = dev->platform_data;
struct drm_device *drm = data;
struct ipu_crtc *ipu_crtc;
int ret;
ipu_crtc = devm_kzalloc(dev, sizeof(*ipu_crtc), GFP_KERNEL);
if (!ipu_crtc)
return -ENOMEM;
ipu_crtc->dev = dev;
ret = ipu_crtc_init(ipu_crtc, pdata, drm);
if (ret)
return ret;
dev_set_drvdata(dev, ipu_crtc);
return 0;
}
static void ipu_drm_unbind(struct device *dev, struct device *master,
void *data)
{
struct ipu_crtc *ipu_crtc = dev_get_drvdata(dev);
imx_drm_remove_crtc(ipu_crtc->imx_crtc);
ipu_plane_put_resources(ipu_crtc->plane[0]);
ipu_put_resources(ipu_crtc);
}
static const struct component_ops ipu_crtc_ops = {
.bind = ipu_drm_bind,
.unbind = ipu_drm_unbind,
};
static int ipu_drm_probe(struct platform_device *pdev)
{
staging: imx-drm-core: Use OF graph to find components and connections between encoder and crtcs This patch adds support to find the involved components connected to the IPU display interface ports using the OF graph bindings documented in Documentation/devicetree/bindings/media/video-interfaces.txt. It makes use of the of_graph (formerly v4l2_of) parsing helpers and thus depends on the patch that moves those out to drivers/of. Each display interface needs to have an associated port node in the device tree. We can associate this node with the crtc platform device and use it to find the crtc corresponding to a given port node instead of using a combination of parent device node and id number, as before. Explicitly converting the void* cookie to the port device tree node allows to get rid of the ipu_id and di_id fields. The multiplexer setting on i.MX6 now can be obtained from the port id (reg property) in the device tree. The imx-drm node now needs a ports property that contains phandles to each of the IPU display interface port nodes. From there, all attached encoders are scanned and enabled encoders are added to a waiting list. The bind order makes sure that once all components are probed, crtcs are bound before encoders, so that imx_drm_encoder_parse_of can be called from the encoder bind callbacks. For parsing the OF graph, temporary copies of the V4L2 OF graph helpers are used, that can be removed again once those are available at a generic place. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-03-05 16:20:52 +07:00
struct device *dev = &pdev->dev;
struct ipu_client_platformdata *pdata = dev->platform_data;
int ret;
staging: imx-drm-core: Use OF graph to find components and connections between encoder and crtcs This patch adds support to find the involved components connected to the IPU display interface ports using the OF graph bindings documented in Documentation/devicetree/bindings/media/video-interfaces.txt. It makes use of the of_graph (formerly v4l2_of) parsing helpers and thus depends on the patch that moves those out to drivers/of. Each display interface needs to have an associated port node in the device tree. We can associate this node with the crtc platform device and use it to find the crtc corresponding to a given port node instead of using a combination of parent device node and id number, as before. Explicitly converting the void* cookie to the port device tree node allows to get rid of the ipu_id and di_id fields. The multiplexer setting on i.MX6 now can be obtained from the port id (reg property) in the device tree. The imx-drm node now needs a ports property that contains phandles to each of the IPU display interface port nodes. From there, all attached encoders are scanned and enabled encoders are added to a waiting list. The bind order makes sure that once all components are probed, crtcs are bound before encoders, so that imx_drm_encoder_parse_of can be called from the encoder bind callbacks. For parsing the OF graph, temporary copies of the V4L2 OF graph helpers are used, that can be removed again once those are available at a generic place. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-03-05 16:20:52 +07:00
if (!dev->platform_data)
return -EINVAL;
staging: imx-drm-core: Use OF graph to find components and connections between encoder and crtcs This patch adds support to find the involved components connected to the IPU display interface ports using the OF graph bindings documented in Documentation/devicetree/bindings/media/video-interfaces.txt. It makes use of the of_graph (formerly v4l2_of) parsing helpers and thus depends on the patch that moves those out to drivers/of. Each display interface needs to have an associated port node in the device tree. We can associate this node with the crtc platform device and use it to find the crtc corresponding to a given port node instead of using a combination of parent device node and id number, as before. Explicitly converting the void* cookie to the port device tree node allows to get rid of the ipu_id and di_id fields. The multiplexer setting on i.MX6 now can be obtained from the port id (reg property) in the device tree. The imx-drm node now needs a ports property that contains phandles to each of the IPU display interface port nodes. From there, all attached encoders are scanned and enabled encoders are added to a waiting list. The bind order makes sure that once all components are probed, crtcs are bound before encoders, so that imx_drm_encoder_parse_of can be called from the encoder bind callbacks. For parsing the OF graph, temporary copies of the V4L2 OF graph helpers are used, that can be removed again once those are available at a generic place. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-03-05 16:20:52 +07:00
if (!dev->of_node) {
/* Associate crtc device with the corresponding DI port node */
dev->of_node = ipu_drm_get_port_by_id(dev->parent->of_node,
pdata->di + 2);
if (!dev->of_node) {
dev_err(dev, "missing port@%d node in %s\n",
pdata->di + 2, dev->parent->of_node->full_name);
return -ENODEV;
}
}
ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
if (ret)
return ret;
staging: imx-drm-core: Use OF graph to find components and connections between encoder and crtcs This patch adds support to find the involved components connected to the IPU display interface ports using the OF graph bindings documented in Documentation/devicetree/bindings/media/video-interfaces.txt. It makes use of the of_graph (formerly v4l2_of) parsing helpers and thus depends on the patch that moves those out to drivers/of. Each display interface needs to have an associated port node in the device tree. We can associate this node with the crtc platform device and use it to find the crtc corresponding to a given port node instead of using a combination of parent device node and id number, as before. Explicitly converting the void* cookie to the port device tree node allows to get rid of the ipu_id and di_id fields. The multiplexer setting on i.MX6 now can be obtained from the port id (reg property) in the device tree. The imx-drm node now needs a ports property that contains phandles to each of the IPU display interface port nodes. From there, all attached encoders are scanned and enabled encoders are added to a waiting list. The bind order makes sure that once all components are probed, crtcs are bound before encoders, so that imx_drm_encoder_parse_of can be called from the encoder bind callbacks. For parsing the OF graph, temporary copies of the V4L2 OF graph helpers are used, that can be removed again once those are available at a generic place. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-03-05 16:20:52 +07:00
return component_add(dev, &ipu_crtc_ops);
}
static int ipu_drm_remove(struct platform_device *pdev)
{
component_del(&pdev->dev, &ipu_crtc_ops);
return 0;
}
static struct platform_driver ipu_drm_driver = {
.driver = {
.name = "imx-ipuv3-crtc",
},
.probe = ipu_drm_probe,
.remove = ipu_drm_remove,
};
module_platform_driver(ipu_drm_driver);
MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:imx-ipuv3-crtc");