linux_dsm_epyc7002/arch/powerpc/platforms/pseries/lpar.c

633 lines
16 KiB
C
Raw Normal View History

/*
* pSeries_lpar.c
* Copyright (C) 2001 Todd Inglett, IBM Corporation
*
* pSeries LPAR support.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/* Enables debugging of low-level hash table routines - careful! */
#undef DEBUG
#include <linux/kernel.h>
#include <linux/dma-mapping.h>
#include <linux/console.h>
#include <linux/export.h>
#include <asm/processor.h>
#include <asm/mmu.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/machdep.h>
#include <asm/abs_addr.h>
#include <asm/mmu_context.h>
#include <asm/iommu.h>
#include <asm/tlbflush.h>
#include <asm/tlb.h>
#include <asm/prom.h>
#include <asm/cputable.h>
#include <asm/udbg.h>
#include <asm/smp.h>
#include <asm/trace.h>
#include "plpar_wrappers.h"
#include "pseries.h"
/* in hvCall.S */
EXPORT_SYMBOL(plpar_hcall);
EXPORT_SYMBOL(plpar_hcall9);
EXPORT_SYMBOL(plpar_hcall_norets);
extern void pSeries_find_serial_port(void);
void vpa_init(int cpu)
{
int hwcpu = get_hard_smp_processor_id(cpu);
unsigned long addr;
long ret;
powerpc: Account time using timebase rather than PURR Currently, when CONFIG_VIRT_CPU_ACCOUNTING is enabled, we use the PURR register for measuring the user and system time used by processes, as well as other related times such as hardirq and softirq times. This turns out to be quite confusing for users because it means that a program will often be measured as taking less time when run on a multi-threaded processor (SMT2 or SMT4 mode) than it does when run on a single-threaded processor (ST mode), even though the program takes longer to finish. The discrepancy is accounted for as stolen time, which is also confusing, particularly when there are no other partitions running. This changes the accounting to use the timebase instead, meaning that the reported user and system times are the actual number of real-time seconds that the program was executing on the processor thread, regardless of which SMT mode the processor is in. Thus a program will generally show greater user and system times when run on a multi-threaded processor than on a single-threaded processor. On pSeries systems on POWER5 or later processors, we measure the stolen time (time when this partition wasn't running) using the hypervisor dispatch trace log. We check for new entries in the log on every entry from user mode and on every transition from kernel process context to soft or hard IRQ context (i.e. when account_system_vtime() gets called). So that we can correctly distinguish time stolen from user time and time stolen from system time, without having to check the log on every exit to user mode, we store separate timestamps for exit to user mode and entry from user mode. On systems that have a SPURR (POWER6 and POWER7), we read the SPURR in account_system_vtime() (as before), and then apportion the SPURR ticks since the last time we read it between scaled user time and scaled system time according to the relative proportions of user time and system time over the same interval. This avoids having to read the SPURR on every kernel entry and exit. On systems that have PURR but not SPURR (i.e., POWER5), we do the same using the PURR rather than the SPURR. This disables the DTL user interface in /sys/debug/kernel/powerpc/dtl for now since it conflicts with the use of the dispatch trace log by the time accounting code. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-27 02:56:43 +07:00
struct paca_struct *pp;
struct dtl_entry *dtl;
if (cpu_has_feature(CPU_FTR_ALTIVEC))
lppaca_of(cpu).vmxregs_in_use = 1;
addr = __pa(&lppaca_of(cpu));
ret = register_vpa(hwcpu, addr);
if (ret) {
pr_err("WARNING: VPA registration for cpu %d (hw %d) of area "
"%lx failed with %ld\n", cpu, hwcpu, addr, ret);
return;
}
/*
* PAPR says this feature is SLB-Buffer but firmware never
* reports that. All SPLPAR support SLB shadow buffer.
*/
addr = __pa(&slb_shadow[cpu]);
if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
ret = register_slb_shadow(hwcpu, addr);
if (ret)
pr_err("WARNING: SLB shadow buffer registration for "
"cpu %d (hw %d) of area %lx failed with %ld\n",
cpu, hwcpu, addr, ret);
}
powerpc: Account time using timebase rather than PURR Currently, when CONFIG_VIRT_CPU_ACCOUNTING is enabled, we use the PURR register for measuring the user and system time used by processes, as well as other related times such as hardirq and softirq times. This turns out to be quite confusing for users because it means that a program will often be measured as taking less time when run on a multi-threaded processor (SMT2 or SMT4 mode) than it does when run on a single-threaded processor (ST mode), even though the program takes longer to finish. The discrepancy is accounted for as stolen time, which is also confusing, particularly when there are no other partitions running. This changes the accounting to use the timebase instead, meaning that the reported user and system times are the actual number of real-time seconds that the program was executing on the processor thread, regardless of which SMT mode the processor is in. Thus a program will generally show greater user and system times when run on a multi-threaded processor than on a single-threaded processor. On pSeries systems on POWER5 or later processors, we measure the stolen time (time when this partition wasn't running) using the hypervisor dispatch trace log. We check for new entries in the log on every entry from user mode and on every transition from kernel process context to soft or hard IRQ context (i.e. when account_system_vtime() gets called). So that we can correctly distinguish time stolen from user time and time stolen from system time, without having to check the log on every exit to user mode, we store separate timestamps for exit to user mode and entry from user mode. On systems that have a SPURR (POWER6 and POWER7), we read the SPURR in account_system_vtime() (as before), and then apportion the SPURR ticks since the last time we read it between scaled user time and scaled system time according to the relative proportions of user time and system time over the same interval. This avoids having to read the SPURR on every kernel entry and exit. On systems that have PURR but not SPURR (i.e., POWER5), we do the same using the PURR rather than the SPURR. This disables the DTL user interface in /sys/debug/kernel/powerpc/dtl for now since it conflicts with the use of the dispatch trace log by the time accounting code. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-27 02:56:43 +07:00
/*
* Register dispatch trace log, if one has been allocated.
*/
pp = &paca[cpu];
dtl = pp->dispatch_log;
if (dtl) {
pp->dtl_ridx = 0;
pp->dtl_curr = dtl;
lppaca_of(cpu).dtl_idx = 0;
/* hypervisor reads buffer length from this field */
dtl->enqueue_to_dispatch_time = DISPATCH_LOG_BYTES;
ret = register_dtl(hwcpu, __pa(dtl));
if (ret)
pr_err("WARNING: DTL registration of cpu %d (hw %d) "
"failed with %ld\n", smp_processor_id(),
hwcpu, ret);
powerpc: Account time using timebase rather than PURR Currently, when CONFIG_VIRT_CPU_ACCOUNTING is enabled, we use the PURR register for measuring the user and system time used by processes, as well as other related times such as hardirq and softirq times. This turns out to be quite confusing for users because it means that a program will often be measured as taking less time when run on a multi-threaded processor (SMT2 or SMT4 mode) than it does when run on a single-threaded processor (ST mode), even though the program takes longer to finish. The discrepancy is accounted for as stolen time, which is also confusing, particularly when there are no other partitions running. This changes the accounting to use the timebase instead, meaning that the reported user and system times are the actual number of real-time seconds that the program was executing on the processor thread, regardless of which SMT mode the processor is in. Thus a program will generally show greater user and system times when run on a multi-threaded processor than on a single-threaded processor. On pSeries systems on POWER5 or later processors, we measure the stolen time (time when this partition wasn't running) using the hypervisor dispatch trace log. We check for new entries in the log on every entry from user mode and on every transition from kernel process context to soft or hard IRQ context (i.e. when account_system_vtime() gets called). So that we can correctly distinguish time stolen from user time and time stolen from system time, without having to check the log on every exit to user mode, we store separate timestamps for exit to user mode and entry from user mode. On systems that have a SPURR (POWER6 and POWER7), we read the SPURR in account_system_vtime() (as before), and then apportion the SPURR ticks since the last time we read it between scaled user time and scaled system time according to the relative proportions of user time and system time over the same interval. This avoids having to read the SPURR on every kernel entry and exit. On systems that have PURR but not SPURR (i.e., POWER5), we do the same using the PURR rather than the SPURR. This disables the DTL user interface in /sys/debug/kernel/powerpc/dtl for now since it conflicts with the use of the dispatch trace log by the time accounting code. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-27 02:56:43 +07:00
lppaca_of(cpu).dtl_enable_mask = 2;
}
}
static long pSeries_lpar_hpte_insert(unsigned long hpte_group,
unsigned long va, unsigned long pa,
unsigned long rflags, unsigned long vflags,
int psize, int ssize)
{
unsigned long lpar_rc;
unsigned long flags;
unsigned long slot;
unsigned long hpte_v, hpte_r;
if (!(vflags & HPTE_V_BOLTED))
pr_devel("hpte_insert(group=%lx, va=%016lx, pa=%016lx, "
"rflags=%lx, vflags=%lx, psize=%d)\n",
hpte_group, va, pa, rflags, vflags, psize);
hpte_v = hpte_encode_v(va, psize, ssize) | vflags | HPTE_V_VALID;
hpte_r = hpte_encode_r(pa, psize) | rflags;
if (!(vflags & HPTE_V_BOLTED))
pr_devel(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r);
/* Now fill in the actual HPTE */
/* Set CEC cookie to 0 */
/* Zero page = 0 */
/* I-cache Invalidate = 0 */
/* I-cache synchronize = 0 */
/* Exact = 0 */
flags = 0;
/* Make pHyp happy */
if ((rflags & _PAGE_NO_CACHE) & !(rflags & _PAGE_WRITETHRU))
hpte_r &= ~_PAGE_COHERENT;
if (firmware_has_feature(FW_FEATURE_XCMO) && !(hpte_r & HPTE_R_N))
flags |= H_COALESCE_CAND;
lpar_rc = plpar_pte_enter(flags, hpte_group, hpte_v, hpte_r, &slot);
if (unlikely(lpar_rc == H_PTEG_FULL)) {
if (!(vflags & HPTE_V_BOLTED))
pr_devel(" full\n");
return -1;
}
/*
* Since we try and ioremap PHBs we don't own, the pte insert
* will fail. However we must catch the failure in hash_page
* or we will loop forever, so return -2 in this case.
*/
if (unlikely(lpar_rc != H_SUCCESS)) {
if (!(vflags & HPTE_V_BOLTED))
pr_devel(" lpar err %lu\n", lpar_rc);
return -2;
}
if (!(vflags & HPTE_V_BOLTED))
pr_devel(" -> slot: %lu\n", slot & 7);
/* Because of iSeries, we have to pass down the secondary
* bucket bit here as well
*/
return (slot & 7) | (!!(vflags & HPTE_V_SECONDARY) << 3);
}
static DEFINE_SPINLOCK(pSeries_lpar_tlbie_lock);
static long pSeries_lpar_hpte_remove(unsigned long hpte_group)
{
unsigned long slot_offset;
unsigned long lpar_rc;
int i;
unsigned long dummy1, dummy2;
/* pick a random slot to start at */
slot_offset = mftb() & 0x7;
for (i = 0; i < HPTES_PER_GROUP; i++) {
/* don't remove a bolted entry */
lpar_rc = plpar_pte_remove(H_ANDCOND, hpte_group + slot_offset,
(0x1UL << 4), &dummy1, &dummy2);
if (lpar_rc == H_SUCCESS)
return i;
BUG_ON(lpar_rc != H_NOT_FOUND);
slot_offset++;
slot_offset &= 0x7;
}
return -1;
}
static void pSeries_lpar_hptab_clear(void)
{
unsigned long size_bytes = 1UL << ppc64_pft_size;
unsigned long hpte_count = size_bytes >> 4;
struct {
unsigned long pteh;
unsigned long ptel;
} ptes[4];
long lpar_rc;
unsigned long i, j;
/* Read in batches of 4,
* invalidate only valid entries not in the VRMA
* hpte_count will be a multiple of 4
*/
for (i = 0; i < hpte_count; i += 4) {
lpar_rc = plpar_pte_read_4_raw(0, i, (void *)ptes);
if (lpar_rc != H_SUCCESS)
continue;
for (j = 0; j < 4; j++){
if ((ptes[j].pteh & HPTE_V_VRMA_MASK) ==
HPTE_V_VRMA_MASK)
continue;
if (ptes[j].pteh & HPTE_V_VALID)
plpar_pte_remove_raw(0, i + j, 0,
&(ptes[j].pteh), &(ptes[j].ptel));
}
}
}
/*
* This computes the AVPN and B fields of the first dword of a HPTE,
* for use when we want to match an existing PTE. The bottom 7 bits
* of the returned value are zero.
*/
static inline unsigned long hpte_encode_avpn(unsigned long va, int psize,
int ssize)
{
unsigned long v;
v = (va >> 23) & ~(mmu_psize_defs[psize].avpnm);
v <<= HPTE_V_AVPN_SHIFT;
v |= ((unsigned long) ssize) << HPTE_V_SSIZE_SHIFT;
return v;
}
/*
* NOTE: for updatepp ops we are fortunate that the linux "newpp" bits and
* the low 3 bits of flags happen to line up. So no transform is needed.
* We can probably optimize here and assume the high bits of newpp are
* already zero. For now I am paranoid.
*/
static long pSeries_lpar_hpte_updatepp(unsigned long slot,
unsigned long newpp,
unsigned long va,
int psize, int ssize, int local)
{
unsigned long lpar_rc;
unsigned long flags = (newpp & 7) | H_AVPN;
unsigned long want_v;
want_v = hpte_encode_avpn(va, psize, ssize);
pr_devel(" update: avpnv=%016lx, hash=%016lx, f=%lx, psize: %d ...",
want_v, slot, flags, psize);
lpar_rc = plpar_pte_protect(flags, slot, want_v);
if (lpar_rc == H_NOT_FOUND) {
pr_devel("not found !\n");
return -1;
}
pr_devel("ok\n");
BUG_ON(lpar_rc != H_SUCCESS);
return 0;
}
static unsigned long pSeries_lpar_hpte_getword0(unsigned long slot)
{
unsigned long dword0;
unsigned long lpar_rc;
unsigned long dummy_word1;
unsigned long flags;
/* Read 1 pte at a time */
/* Do not need RPN to logical page translation */
/* No cross CEC PFT access */
flags = 0;
lpar_rc = plpar_pte_read(flags, slot, &dword0, &dummy_word1);
BUG_ON(lpar_rc != H_SUCCESS);
return dword0;
}
static long pSeries_lpar_hpte_find(unsigned long va, int psize, int ssize)
{
unsigned long hash;
unsigned long i;
long slot;
unsigned long want_v, hpte_v;
hash = hpt_hash(va, mmu_psize_defs[psize].shift, ssize);
want_v = hpte_encode_avpn(va, psize, ssize);
/* Bolted entries are always in the primary group */
slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
for (i = 0; i < HPTES_PER_GROUP; i++) {
hpte_v = pSeries_lpar_hpte_getword0(slot);
if (HPTE_V_COMPARE(hpte_v, want_v) && (hpte_v & HPTE_V_VALID))
/* HPTE matches */
return slot;
++slot;
}
return -1;
}
static void pSeries_lpar_hpte_updateboltedpp(unsigned long newpp,
unsigned long ea,
int psize, int ssize)
{
unsigned long lpar_rc, slot, vsid, va, flags;
vsid = get_kernel_vsid(ea, ssize);
va = hpt_va(ea, vsid, ssize);
slot = pSeries_lpar_hpte_find(va, psize, ssize);
BUG_ON(slot == -1);
flags = newpp & 7;
lpar_rc = plpar_pte_protect(flags, slot, 0);
BUG_ON(lpar_rc != H_SUCCESS);
}
static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long va,
int psize, int ssize, int local)
{
unsigned long want_v;
unsigned long lpar_rc;
unsigned long dummy1, dummy2;
pr_devel(" inval : slot=%lx, va=%016lx, psize: %d, local: %d\n",
slot, va, psize, local);
want_v = hpte_encode_avpn(va, psize, ssize);
lpar_rc = plpar_pte_remove(H_AVPN, slot, want_v, &dummy1, &dummy2);
if (lpar_rc == H_NOT_FOUND)
return;
BUG_ON(lpar_rc != H_SUCCESS);
}
static void pSeries_lpar_hpte_removebolted(unsigned long ea,
int psize, int ssize)
{
unsigned long slot, vsid, va;
vsid = get_kernel_vsid(ea, ssize);
va = hpt_va(ea, vsid, ssize);
slot = pSeries_lpar_hpte_find(va, psize, ssize);
BUG_ON(slot == -1);
pSeries_lpar_hpte_invalidate(slot, va, psize, ssize, 0);
}
/* Flag bits for H_BULK_REMOVE */
#define HBR_REQUEST 0x4000000000000000UL
#define HBR_RESPONSE 0x8000000000000000UL
#define HBR_END 0xc000000000000000UL
#define HBR_AVPN 0x0200000000000000UL
#define HBR_ANDCOND 0x0100000000000000UL
/*
* Take a spinlock around flushes to avoid bouncing the hypervisor tlbie
* lock.
*/
static void pSeries_lpar_flush_hash_range(unsigned long number, int local)
{
unsigned long i, pix, rc;
unsigned long flags = 0;
struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
int lock_tlbie = !mmu_has_feature(MMU_FTR_LOCKLESS_TLBIE);
unsigned long param[9];
unsigned long va;
unsigned long hash, index, shift, hidx, slot;
real_pte_t pte;
int psize, ssize;
if (lock_tlbie)
spin_lock_irqsave(&pSeries_lpar_tlbie_lock, flags);
psize = batch->psize;
ssize = batch->ssize;
pix = 0;
for (i = 0; i < number; i++) {
va = batch->vaddr[i];
pte = batch->pte[i];
pte_iterate_hashed_subpages(pte, psize, va, index, shift) {
hash = hpt_hash(va, shift, ssize);
hidx = __rpte_to_hidx(pte, index);
if (hidx & _PTEIDX_SECONDARY)
hash = ~hash;
slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
slot += hidx & _PTEIDX_GROUP_IX;
if (!firmware_has_feature(FW_FEATURE_BULK_REMOVE)) {
pSeries_lpar_hpte_invalidate(slot, va, psize,
ssize, local);
} else {
param[pix] = HBR_REQUEST | HBR_AVPN | slot;
param[pix+1] = hpte_encode_avpn(va, psize,
ssize);
pix += 2;
if (pix == 8) {
rc = plpar_hcall9(H_BULK_REMOVE, param,
param[0], param[1], param[2],
param[3], param[4], param[5],
param[6], param[7]);
BUG_ON(rc != H_SUCCESS);
pix = 0;
}
}
} pte_iterate_hashed_end();
}
if (pix) {
param[pix] = HBR_END;
rc = plpar_hcall9(H_BULK_REMOVE, param, param[0], param[1],
param[2], param[3], param[4], param[5],
param[6], param[7]);
BUG_ON(rc != H_SUCCESS);
}
if (lock_tlbie)
spin_unlock_irqrestore(&pSeries_lpar_tlbie_lock, flags);
}
static int __init disable_bulk_remove(char *str)
{
if (strcmp(str, "off") == 0 &&
firmware_has_feature(FW_FEATURE_BULK_REMOVE)) {
printk(KERN_INFO "Disabling BULK_REMOVE firmware feature");
powerpc_firmware_features &= ~FW_FEATURE_BULK_REMOVE;
}
return 1;
}
__setup("bulk_remove=", disable_bulk_remove);
void __init hpte_init_lpar(void)
{
ppc_md.hpte_invalidate = pSeries_lpar_hpte_invalidate;
ppc_md.hpte_updatepp = pSeries_lpar_hpte_updatepp;
ppc_md.hpte_updateboltedpp = pSeries_lpar_hpte_updateboltedpp;
ppc_md.hpte_insert = pSeries_lpar_hpte_insert;
ppc_md.hpte_remove = pSeries_lpar_hpte_remove;
ppc_md.hpte_removebolted = pSeries_lpar_hpte_removebolted;
ppc_md.flush_hash_range = pSeries_lpar_flush_hash_range;
ppc_md.hpte_clear_all = pSeries_lpar_hptab_clear;
}
#ifdef CONFIG_PPC_SMLPAR
#define CMO_FREE_HINT_DEFAULT 1
static int cmo_free_hint_flag = CMO_FREE_HINT_DEFAULT;
static int __init cmo_free_hint(char *str)
{
char *parm;
parm = strstrip(str);
if (strcasecmp(parm, "no") == 0 || strcasecmp(parm, "off") == 0) {
printk(KERN_INFO "cmo_free_hint: CMO free page hinting is not active.\n");
cmo_free_hint_flag = 0;
return 1;
}
cmo_free_hint_flag = 1;
printk(KERN_INFO "cmo_free_hint: CMO free page hinting is active.\n");
if (strcasecmp(parm, "yes") == 0 || strcasecmp(parm, "on") == 0)
return 1;
return 0;
}
__setup("cmo_free_hint=", cmo_free_hint);
static void pSeries_set_page_state(struct page *page, int order,
unsigned long state)
{
int i, j;
unsigned long cmo_page_sz, addr;
cmo_page_sz = cmo_get_page_size();
addr = __pa((unsigned long)page_address(page));
for (i = 0; i < (1 << order); i++, addr += PAGE_SIZE) {
for (j = 0; j < PAGE_SIZE; j += cmo_page_sz)
plpar_hcall_norets(H_PAGE_INIT, state, addr + j, 0);
}
}
void arch_free_page(struct page *page, int order)
{
if (!cmo_free_hint_flag || !firmware_has_feature(FW_FEATURE_CMO))
return;
pSeries_set_page_state(page, order, H_PAGE_SET_UNUSED);
}
EXPORT_SYMBOL(arch_free_page);
#endif
#ifdef CONFIG_TRACEPOINTS
/*
* We optimise our hcall path by placing hcall_tracepoint_refcount
* directly in the TOC so we can check if the hcall tracepoints are
* enabled via a single load.
*/
/* NB: reg/unreg are called while guarded with the tracepoints_mutex */
extern long hcall_tracepoint_refcount;
/*
* Since the tracing code might execute hcalls we need to guard against
* recursion. One example of this are spinlocks calling H_YIELD on
* shared processor partitions.
*/
static DEFINE_PER_CPU(unsigned int, hcall_trace_depth);
void hcall_tracepoint_regfunc(void)
{
hcall_tracepoint_refcount++;
}
void hcall_tracepoint_unregfunc(void)
{
hcall_tracepoint_refcount--;
}
void __trace_hcall_entry(unsigned long opcode, unsigned long *args)
{
unsigned long flags;
unsigned int *depth;
local_irq_save(flags);
depth = &__get_cpu_var(hcall_trace_depth);
if (*depth)
goto out;
(*depth)++;
trace_hcall_entry(opcode, args);
if (opcode == H_CEDE)
rcu_idle_enter();
(*depth)--;
out:
local_irq_restore(flags);
}
void __trace_hcall_exit(long opcode, unsigned long retval,
unsigned long *retbuf)
{
unsigned long flags;
unsigned int *depth;
local_irq_save(flags);
depth = &__get_cpu_var(hcall_trace_depth);
if (*depth)
goto out;
(*depth)++;
if (opcode == H_CEDE)
rcu_idle_exit();
trace_hcall_exit(opcode, retval, retbuf);
(*depth)--;
out:
local_irq_restore(flags);
}
#endif
/**
* h_get_mpp
* H_GET_MPP hcall returns info in 7 parms
*/
int h_get_mpp(struct hvcall_mpp_data *mpp_data)
{
int rc;
unsigned long retbuf[PLPAR_HCALL9_BUFSIZE];
rc = plpar_hcall9(H_GET_MPP, retbuf);
mpp_data->entitled_mem = retbuf[0];
mpp_data->mapped_mem = retbuf[1];
mpp_data->group_num = (retbuf[2] >> 2 * 8) & 0xffff;
mpp_data->pool_num = retbuf[2] & 0xffff;
mpp_data->mem_weight = (retbuf[3] >> 7 * 8) & 0xff;
mpp_data->unallocated_mem_weight = (retbuf[3] >> 6 * 8) & 0xff;
mpp_data->unallocated_entitlement = retbuf[3] & 0xffffffffffff;
mpp_data->pool_size = retbuf[4];
mpp_data->loan_request = retbuf[5];
mpp_data->backing_mem = retbuf[6];
return rc;
}
EXPORT_SYMBOL(h_get_mpp);
int h_get_mpp_x(struct hvcall_mpp_x_data *mpp_x_data)
{
int rc;
unsigned long retbuf[PLPAR_HCALL9_BUFSIZE] = { 0 };
rc = plpar_hcall9(H_GET_MPP_X, retbuf);
mpp_x_data->coalesced_bytes = retbuf[0];
mpp_x_data->pool_coalesced_bytes = retbuf[1];
mpp_x_data->pool_purr_cycles = retbuf[2];
mpp_x_data->pool_spurr_cycles = retbuf[3];
return rc;
}