linux_dsm_epyc7002/drivers/gpu/drm/radeon/evergreen_hdmi.c

490 lines
16 KiB
C
Raw Normal View History

/*
* Copyright 2008 Advanced Micro Devices, Inc.
* Copyright 2008 Red Hat Inc.
* Copyright 2009 Christian König.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
* Authors: Christian König
* Rafał Miłecki
*/
#include <linux/hdmi.h>
#include <drm/radeon_drm.h>
#include "radeon.h"
#include "radeon_asic.h"
#include "radeon_audio.h"
#include "evergreend.h"
#include "atom.h"
/* enable the audio stream */
void dce4_audio_enable(struct radeon_device *rdev,
struct r600_audio_pin *pin,
u8 enable_mask)
{
u32 tmp = RREG32(AZ_HOT_PLUG_CONTROL);
if (!pin)
return;
if (enable_mask) {
tmp |= AUDIO_ENABLED;
if (enable_mask & 1)
tmp |= PIN0_AUDIO_ENABLED;
if (enable_mask & 2)
tmp |= PIN1_AUDIO_ENABLED;
if (enable_mask & 4)
tmp |= PIN2_AUDIO_ENABLED;
if (enable_mask & 8)
tmp |= PIN3_AUDIO_ENABLED;
} else {
tmp &= ~(AUDIO_ENABLED |
PIN0_AUDIO_ENABLED |
PIN1_AUDIO_ENABLED |
PIN2_AUDIO_ENABLED |
PIN3_AUDIO_ENABLED);
}
WREG32(AZ_HOT_PLUG_CONTROL, tmp);
}
void evergreen_hdmi_update_acr(struct drm_encoder *encoder, long offset,
const struct radeon_hdmi_acr *acr)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
int bpc = 8;
if (encoder->crtc) {
struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
bpc = radeon_crtc->bpc;
}
if (bpc > 8)
WREG32(HDMI_ACR_PACKET_CONTROL + offset,
HDMI_ACR_AUTO_SEND); /* allow hw to sent ACR packets when required */
else
WREG32(HDMI_ACR_PACKET_CONTROL + offset,
HDMI_ACR_SOURCE | /* select SW CTS value */
HDMI_ACR_AUTO_SEND); /* allow hw to sent ACR packets when required */
WREG32(HDMI_ACR_32_0 + offset, HDMI_ACR_CTS_32(acr->cts_32khz));
WREG32(HDMI_ACR_32_1 + offset, acr->n_32khz);
WREG32(HDMI_ACR_44_0 + offset, HDMI_ACR_CTS_44(acr->cts_44_1khz));
WREG32(HDMI_ACR_44_1 + offset, acr->n_44_1khz);
WREG32(HDMI_ACR_48_0 + offset, HDMI_ACR_CTS_48(acr->cts_48khz));
WREG32(HDMI_ACR_48_1 + offset, acr->n_48khz);
}
void dce4_afmt_write_latency_fields(struct drm_encoder *encoder,
struct drm_connector *connector, struct drm_display_mode *mode)
{
struct radeon_device *rdev = encoder->dev->dev_private;
u32 tmp = 0;
if (mode->flags & DRM_MODE_FLAG_INTERLACE) {
if (connector->latency_present[1])
tmp = VIDEO_LIPSYNC(connector->video_latency[1]) |
AUDIO_LIPSYNC(connector->audio_latency[1]);
else
tmp = VIDEO_LIPSYNC(255) | AUDIO_LIPSYNC(255);
} else {
if (connector->latency_present[0])
tmp = VIDEO_LIPSYNC(connector->video_latency[0]) |
AUDIO_LIPSYNC(connector->audio_latency[0]);
else
tmp = VIDEO_LIPSYNC(255) | AUDIO_LIPSYNC(255);
}
WREG32_ENDPOINT(0, AZ_F0_CODEC_PIN0_CONTROL_RESPONSE_LIPSYNC, tmp);
}
void dce4_afmt_hdmi_write_speaker_allocation(struct drm_encoder *encoder,
u8 *sadb, int sad_count)
{
struct radeon_device *rdev = encoder->dev->dev_private;
u32 tmp;
/* program the speaker allocation */
tmp = RREG32_ENDPOINT(0, AZ_F0_CODEC_PIN0_CONTROL_CHANNEL_SPEAKER);
tmp &= ~(DP_CONNECTION | SPEAKER_ALLOCATION_MASK);
/* set HDMI mode */
tmp |= HDMI_CONNECTION;
if (sad_count)
tmp |= SPEAKER_ALLOCATION(sadb[0]);
else
tmp |= SPEAKER_ALLOCATION(5); /* stereo */
WREG32_ENDPOINT(0, AZ_F0_CODEC_PIN0_CONTROL_CHANNEL_SPEAKER, tmp);
}
void dce4_afmt_dp_write_speaker_allocation(struct drm_encoder *encoder,
u8 *sadb, int sad_count)
{
struct radeon_device *rdev = encoder->dev->dev_private;
u32 tmp;
/* program the speaker allocation */
tmp = RREG32_ENDPOINT(0, AZ_F0_CODEC_PIN0_CONTROL_CHANNEL_SPEAKER);
tmp &= ~(HDMI_CONNECTION | SPEAKER_ALLOCATION_MASK);
/* set DP mode */
tmp |= DP_CONNECTION;
if (sad_count)
tmp |= SPEAKER_ALLOCATION(sadb[0]);
else
tmp |= SPEAKER_ALLOCATION(5); /* stereo */
WREG32_ENDPOINT(0, AZ_F0_CODEC_PIN0_CONTROL_CHANNEL_SPEAKER, tmp);
}
void evergreen_hdmi_write_sad_regs(struct drm_encoder *encoder,
struct cea_sad *sads, int sad_count)
{
int i;
struct radeon_device *rdev = encoder->dev->dev_private;
static const u16 eld_reg_to_type[][2] = {
{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR0, HDMI_AUDIO_CODING_TYPE_PCM },
{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR1, HDMI_AUDIO_CODING_TYPE_AC3 },
{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR2, HDMI_AUDIO_CODING_TYPE_MPEG1 },
{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR3, HDMI_AUDIO_CODING_TYPE_MP3 },
{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR4, HDMI_AUDIO_CODING_TYPE_MPEG2 },
{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR5, HDMI_AUDIO_CODING_TYPE_AAC_LC },
{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR6, HDMI_AUDIO_CODING_TYPE_DTS },
{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR7, HDMI_AUDIO_CODING_TYPE_ATRAC },
{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR9, HDMI_AUDIO_CODING_TYPE_EAC3 },
{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR10, HDMI_AUDIO_CODING_TYPE_DTS_HD },
{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR11, HDMI_AUDIO_CODING_TYPE_MLP },
{ AZ_F0_CODEC_PIN0_CONTROL_AUDIO_DESCRIPTOR13, HDMI_AUDIO_CODING_TYPE_WMA_PRO },
};
for (i = 0; i < ARRAY_SIZE(eld_reg_to_type); i++) {
u32 value = 0;
drm/radeon/audio: fix missing multichannel PCM SAD in some cases The current code writing SADs to the audio registers seems to assume that there is at most a single SAD per audio format. However, that is not the case. Especially for PCM it is somewhat common for sinks to have two SADs, one for 8-channel and one for 2-channel audio, which may have different supported sample rates (i.e. the sink supports stereo audio at higher sample rates than multichannel audio). Because of this, only the 2-channel SAD may be used if it appears before the 8-channel SAD. Unless other SADs require otherwise, this may cause the ALSA HDA driver to allow stereo playback only. Fix the code to pick the PCM SAD with the highest number of channels, while merging the rate masks of PCM SADs with lower amount of channels into the additional stereo rate mask byte. Technically there are even more cases to handle (multiple non-PCM SADs of the same type, more than two PCM SADs with varying channel counts, etc), but those have not actually been encountered in the field and handling them would be non-trivial. Example affected EDID from Onkyo TX-SR674 specifying 192kHz stereo support and 96kHz 8-channel support (and other 8-channel compressed formats): 00ffffffffffff003dcb010000000001 ffff0103800000780a0dc9a057479827 12484c00000001010101010101010101 010101010101011d8018711c1620582c 2500c48e2100009e011d007251d01e20 6e285500c48e2100001e000000fc0054 582d53523637342020202020000000fd 00313d0f2e08000a202020202020019b 02032f724f8504030f0e07069413121e 1d1615012f097f070f1f071707503707 503f07c0834f000066030c00ffff808c 0ad08a20e02d10103e9600c48e210000 18011d80d0721c1620102c2580c48e21 00009e011d00bc52d01e20b8285540c4 8e2100001e8c0ad090204031200c4055 00c48e210000180000000000000000a8 Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Andre Heider <a.heider@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-10-29 06:19:16 +07:00
u8 stereo_freqs = 0;
int max_channels = -1;
int j;
for (j = 0; j < sad_count; j++) {
struct cea_sad *sad = &sads[j];
if (sad->format == eld_reg_to_type[i][1]) {
drm/radeon/audio: fix missing multichannel PCM SAD in some cases The current code writing SADs to the audio registers seems to assume that there is at most a single SAD per audio format. However, that is not the case. Especially for PCM it is somewhat common for sinks to have two SADs, one for 8-channel and one for 2-channel audio, which may have different supported sample rates (i.e. the sink supports stereo audio at higher sample rates than multichannel audio). Because of this, only the 2-channel SAD may be used if it appears before the 8-channel SAD. Unless other SADs require otherwise, this may cause the ALSA HDA driver to allow stereo playback only. Fix the code to pick the PCM SAD with the highest number of channels, while merging the rate masks of PCM SADs with lower amount of channels into the additional stereo rate mask byte. Technically there are even more cases to handle (multiple non-PCM SADs of the same type, more than two PCM SADs with varying channel counts, etc), but those have not actually been encountered in the field and handling them would be non-trivial. Example affected EDID from Onkyo TX-SR674 specifying 192kHz stereo support and 96kHz 8-channel support (and other 8-channel compressed formats): 00ffffffffffff003dcb010000000001 ffff0103800000780a0dc9a057479827 12484c00000001010101010101010101 010101010101011d8018711c1620582c 2500c48e2100009e011d007251d01e20 6e285500c48e2100001e000000fc0054 582d53523637342020202020000000fd 00313d0f2e08000a202020202020019b 02032f724f8504030f0e07069413121e 1d1615012f097f070f1f071707503707 503f07c0834f000066030c00ffff808c 0ad08a20e02d10103e9600c48e210000 18011d80d0721c1620102c2580c48e21 00009e011d00bc52d01e20b8285540c4 8e2100001e8c0ad090204031200c4055 00c48e210000180000000000000000a8 Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Andre Heider <a.heider@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-10-29 06:19:16 +07:00
if (sad->channels > max_channels) {
value = MAX_CHANNELS(sad->channels) |
DESCRIPTOR_BYTE_2(sad->byte2) |
SUPPORTED_FREQUENCIES(sad->freq);
max_channels = sad->channels;
}
if (sad->format == HDMI_AUDIO_CODING_TYPE_PCM)
drm/radeon/audio: fix missing multichannel PCM SAD in some cases The current code writing SADs to the audio registers seems to assume that there is at most a single SAD per audio format. However, that is not the case. Especially for PCM it is somewhat common for sinks to have two SADs, one for 8-channel and one for 2-channel audio, which may have different supported sample rates (i.e. the sink supports stereo audio at higher sample rates than multichannel audio). Because of this, only the 2-channel SAD may be used if it appears before the 8-channel SAD. Unless other SADs require otherwise, this may cause the ALSA HDA driver to allow stereo playback only. Fix the code to pick the PCM SAD with the highest number of channels, while merging the rate masks of PCM SADs with lower amount of channels into the additional stereo rate mask byte. Technically there are even more cases to handle (multiple non-PCM SADs of the same type, more than two PCM SADs with varying channel counts, etc), but those have not actually been encountered in the field and handling them would be non-trivial. Example affected EDID from Onkyo TX-SR674 specifying 192kHz stereo support and 96kHz 8-channel support (and other 8-channel compressed formats): 00ffffffffffff003dcb010000000001 ffff0103800000780a0dc9a057479827 12484c00000001010101010101010101 010101010101011d8018711c1620582c 2500c48e2100009e011d007251d01e20 6e285500c48e2100001e000000fc0054 582d53523637342020202020000000fd 00313d0f2e08000a202020202020019b 02032f724f8504030f0e07069413121e 1d1615012f097f070f1f071707503707 503f07c0834f000066030c00ffff808c 0ad08a20e02d10103e9600c48e210000 18011d80d0721c1620102c2580c48e21 00009e011d00bc52d01e20b8285540c4 8e2100001e8c0ad090204031200c4055 00c48e210000180000000000000000a8 Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Andre Heider <a.heider@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-10-29 06:19:16 +07:00
stereo_freqs |= sad->freq;
else
break;
}
}
drm/radeon/audio: fix missing multichannel PCM SAD in some cases The current code writing SADs to the audio registers seems to assume that there is at most a single SAD per audio format. However, that is not the case. Especially for PCM it is somewhat common for sinks to have two SADs, one for 8-channel and one for 2-channel audio, which may have different supported sample rates (i.e. the sink supports stereo audio at higher sample rates than multichannel audio). Because of this, only the 2-channel SAD may be used if it appears before the 8-channel SAD. Unless other SADs require otherwise, this may cause the ALSA HDA driver to allow stereo playback only. Fix the code to pick the PCM SAD with the highest number of channels, while merging the rate masks of PCM SADs with lower amount of channels into the additional stereo rate mask byte. Technically there are even more cases to handle (multiple non-PCM SADs of the same type, more than two PCM SADs with varying channel counts, etc), but those have not actually been encountered in the field and handling them would be non-trivial. Example affected EDID from Onkyo TX-SR674 specifying 192kHz stereo support and 96kHz 8-channel support (and other 8-channel compressed formats): 00ffffffffffff003dcb010000000001 ffff0103800000780a0dc9a057479827 12484c00000001010101010101010101 010101010101011d8018711c1620582c 2500c48e2100009e011d007251d01e20 6e285500c48e2100001e000000fc0054 582d53523637342020202020000000fd 00313d0f2e08000a202020202020019b 02032f724f8504030f0e07069413121e 1d1615012f097f070f1f071707503707 503f07c0834f000066030c00ffff808c 0ad08a20e02d10103e9600c48e210000 18011d80d0721c1620102c2580c48e21 00009e011d00bc52d01e20b8285540c4 8e2100001e8c0ad090204031200c4055 00c48e210000180000000000000000a8 Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Andre Heider <a.heider@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-10-29 06:19:16 +07:00
value |= SUPPORTED_FREQUENCIES_STEREO(stereo_freqs);
WREG32_ENDPOINT(0, eld_reg_to_type[i][0], value);
}
}
/*
* build a AVI Info Frame
*/
void evergreen_set_avi_packet(struct radeon_device *rdev, u32 offset,
unsigned char *buffer, size_t size)
{
uint8_t *frame = buffer + 3;
WREG32(AFMT_AVI_INFO0 + offset,
frame[0x0] | (frame[0x1] << 8) | (frame[0x2] << 16) | (frame[0x3] << 24));
WREG32(AFMT_AVI_INFO1 + offset,
frame[0x4] | (frame[0x5] << 8) | (frame[0x6] << 16) | (frame[0x7] << 24));
WREG32(AFMT_AVI_INFO2 + offset,
frame[0x8] | (frame[0x9] << 8) | (frame[0xA] << 16) | (frame[0xB] << 24));
WREG32(AFMT_AVI_INFO3 + offset,
frame[0xC] | (frame[0xD] << 8) | (buffer[1] << 24));
WREG32_P(HDMI_INFOFRAME_CONTROL1 + offset,
HDMI_AVI_INFO_LINE(2), /* anything other than 0 */
~HDMI_AVI_INFO_LINE_MASK);
}
void dce4_hdmi_audio_set_dto(struct radeon_device *rdev,
struct radeon_crtc *crtc, unsigned int clock)
{
unsigned int max_ratio = clock / 24000;
u32 dto_phase;
u32 wallclock_ratio;
u32 value;
if (max_ratio >= 8) {
dto_phase = 192 * 1000;
wallclock_ratio = 3;
} else if (max_ratio >= 4) {
dto_phase = 96 * 1000;
wallclock_ratio = 2;
} else if (max_ratio >= 2) {
dto_phase = 48 * 1000;
wallclock_ratio = 1;
} else {
dto_phase = 24 * 1000;
wallclock_ratio = 0;
}
value = RREG32(DCCG_AUDIO_DTO0_CNTL) & ~DCCG_AUDIO_DTO_WALLCLOCK_RATIO_MASK;
value |= DCCG_AUDIO_DTO_WALLCLOCK_RATIO(wallclock_ratio);
value &= ~DCCG_AUDIO_DTO1_USE_512FBR_DTO;
WREG32(DCCG_AUDIO_DTO0_CNTL, value);
/* Two dtos; generally use dto0 for HDMI */
value = 0;
if (crtc)
value |= DCCG_AUDIO_DTO0_SOURCE_SEL(crtc->crtc_id);
WREG32(DCCG_AUDIO_DTO_SOURCE, value);
/* Express [24MHz / target pixel clock] as an exact rational
* number (coefficient of two integer numbers. DCCG_AUDIO_DTOx_PHASE
* is the numerator, DCCG_AUDIO_DTOx_MODULE is the denominator
*/
WREG32(DCCG_AUDIO_DTO0_PHASE, dto_phase);
WREG32(DCCG_AUDIO_DTO0_MODULE, clock);
}
void dce4_dp_audio_set_dto(struct radeon_device *rdev,
struct radeon_crtc *crtc, unsigned int clock)
{
u32 value;
value = RREG32(DCCG_AUDIO_DTO1_CNTL) & ~DCCG_AUDIO_DTO_WALLCLOCK_RATIO_MASK;
value |= DCCG_AUDIO_DTO1_USE_512FBR_DTO;
WREG32(DCCG_AUDIO_DTO1_CNTL, value);
/* Two dtos; generally use dto1 for DP */
value = 0;
value |= DCCG_AUDIO_DTO_SEL;
if (crtc)
value |= DCCG_AUDIO_DTO0_SOURCE_SEL(crtc->crtc_id);
WREG32(DCCG_AUDIO_DTO_SOURCE, value);
/* Express [24MHz / target pixel clock] as an exact rational
* number (coefficient of two integer numbers. DCCG_AUDIO_DTOx_PHASE
* is the numerator, DCCG_AUDIO_DTOx_MODULE is the denominator
*/
if (ASIC_IS_DCE41(rdev)) {
unsigned int div = (RREG32(DCE41_DENTIST_DISPCLK_CNTL) &
DENTIST_DPREFCLK_WDIVIDER_MASK) >>
DENTIST_DPREFCLK_WDIVIDER_SHIFT;
div = radeon_audio_decode_dfs_div(div);
if (div)
clock = 100 * clock / div;
}
WREG32(DCCG_AUDIO_DTO1_PHASE, 24000);
WREG32(DCCG_AUDIO_DTO1_MODULE, clock);
}
void dce4_set_vbi_packet(struct drm_encoder *encoder, u32 offset)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
WREG32(HDMI_VBI_PACKET_CONTROL + offset,
HDMI_NULL_SEND | /* send null packets when required */
HDMI_GC_SEND | /* send general control packets */
HDMI_GC_CONT); /* send general control packets every frame */
}
void dce4_hdmi_set_color_depth(struct drm_encoder *encoder, u32 offset, int bpc)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
uint32_t val;
val = RREG32(HDMI_CONTROL + offset);
val &= ~HDMI_DEEP_COLOR_ENABLE;
val &= ~HDMI_DEEP_COLOR_DEPTH_MASK;
switch (bpc) {
case 0:
case 6:
case 8:
case 16:
default:
DRM_DEBUG("%s: Disabling hdmi deep color for %d bpc.\n",
connector->name, bpc);
break;
case 10:
val |= HDMI_DEEP_COLOR_ENABLE;
val |= HDMI_DEEP_COLOR_DEPTH(HDMI_30BIT_DEEP_COLOR);
DRM_DEBUG("%s: Enabling hdmi deep color 30 for 10 bpc.\n",
connector->name);
break;
case 12:
val |= HDMI_DEEP_COLOR_ENABLE;
val |= HDMI_DEEP_COLOR_DEPTH(HDMI_36BIT_DEEP_COLOR);
DRM_DEBUG("%s: Enabling hdmi deep color 36 for 12 bpc.\n",
connector->name);
break;
}
WREG32(HDMI_CONTROL + offset, val);
}
void dce4_set_audio_packet(struct drm_encoder *encoder, u32 offset)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
WREG32(AFMT_INFOFRAME_CONTROL0 + offset,
AFMT_AUDIO_INFO_UPDATE); /* required for audio info values to be updated */
WREG32(AFMT_60958_0 + offset,
AFMT_60958_CS_CHANNEL_NUMBER_L(1));
WREG32(AFMT_60958_1 + offset,
AFMT_60958_CS_CHANNEL_NUMBER_R(2));
WREG32(AFMT_60958_2 + offset,
AFMT_60958_CS_CHANNEL_NUMBER_2(3) |
AFMT_60958_CS_CHANNEL_NUMBER_3(4) |
AFMT_60958_CS_CHANNEL_NUMBER_4(5) |
AFMT_60958_CS_CHANNEL_NUMBER_5(6) |
AFMT_60958_CS_CHANNEL_NUMBER_6(7) |
AFMT_60958_CS_CHANNEL_NUMBER_7(8));
WREG32(AFMT_AUDIO_PACKET_CONTROL2 + offset,
AFMT_AUDIO_CHANNEL_ENABLE(0xff));
WREG32(HDMI_AUDIO_PACKET_CONTROL + offset,
HDMI_AUDIO_DELAY_EN(1) | /* set the default audio delay */
HDMI_AUDIO_PACKETS_PER_LINE(3)); /* should be suffient for all audio modes and small enough for all hblanks */
/* allow 60958 channel status and send audio packets fields to be updated */
WREG32_OR(AFMT_AUDIO_PACKET_CONTROL + offset,
AFMT_RESET_FIFO_WHEN_AUDIO_DIS | AFMT_60958_CS_UPDATE);
}
void dce4_set_mute(struct drm_encoder *encoder, u32 offset, bool mute)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
if (mute)
WREG32_OR(HDMI_GC + offset, HDMI_GC_AVMUTE);
else
WREG32_AND(HDMI_GC + offset, ~HDMI_GC_AVMUTE);
}
void evergreen_hdmi_enable(struct drm_encoder *encoder, bool enable)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
if (!dig || !dig->afmt)
return;
if (enable) {
struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
if (connector && drm_detect_monitor_audio(radeon_connector_edid(connector))) {
WREG32(HDMI_INFOFRAME_CONTROL0 + dig->afmt->offset,
HDMI_AVI_INFO_SEND | /* enable AVI info frames */
HDMI_AVI_INFO_CONT | /* required for audio info values to be updated */
HDMI_AUDIO_INFO_SEND | /* enable audio info frames (frames won't be set until audio is enabled) */
HDMI_AUDIO_INFO_CONT); /* required for audio info values to be updated */
WREG32_OR(AFMT_AUDIO_PACKET_CONTROL + dig->afmt->offset,
AFMT_AUDIO_SAMPLE_SEND);
} else {
WREG32(HDMI_INFOFRAME_CONTROL0 + dig->afmt->offset,
HDMI_AVI_INFO_SEND | /* enable AVI info frames */
HDMI_AVI_INFO_CONT); /* required for audio info values to be updated */
WREG32_AND(AFMT_AUDIO_PACKET_CONTROL + dig->afmt->offset,
~AFMT_AUDIO_SAMPLE_SEND);
}
} else {
WREG32_AND(AFMT_AUDIO_PACKET_CONTROL + dig->afmt->offset,
~AFMT_AUDIO_SAMPLE_SEND);
WREG32(HDMI_INFOFRAME_CONTROL0 + dig->afmt->offset, 0);
}
dig->afmt->enabled = enable;
DRM_DEBUG("%sabling HDMI interface @ 0x%04X for encoder 0x%x\n",
enable ? "En" : "Dis", dig->afmt->offset, radeon_encoder->encoder_id);
}
void evergreen_dp_enable(struct drm_encoder *encoder, bool enable)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
if (!dig || !dig->afmt)
return;
if (enable && connector &&
drm_detect_monitor_audio(radeon_connector_edid(connector))) {
struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
struct radeon_connector *radeon_connector = to_radeon_connector(connector);
struct radeon_connector_atom_dig *dig_connector;
uint32_t val;
WREG32_OR(AFMT_AUDIO_PACKET_CONTROL + dig->afmt->offset,
AFMT_AUDIO_SAMPLE_SEND);
WREG32(EVERGREEN_DP_SEC_TIMESTAMP + dig->afmt->offset,
EVERGREEN_DP_SEC_TIMESTAMP_MODE(1));
if (!ASIC_IS_DCE6(rdev) && radeon_connector->con_priv) {
dig_connector = radeon_connector->con_priv;
val = RREG32(EVERGREEN_DP_SEC_AUD_N + dig->afmt->offset);
val &= ~EVERGREEN_DP_SEC_N_BASE_MULTIPLE(0xf);
if (dig_connector->dp_clock == 162000)
val |= EVERGREEN_DP_SEC_N_BASE_MULTIPLE(3);
else
val |= EVERGREEN_DP_SEC_N_BASE_MULTIPLE(5);
WREG32(EVERGREEN_DP_SEC_AUD_N + dig->afmt->offset, val);
}
WREG32(EVERGREEN_DP_SEC_CNTL + dig->afmt->offset,
EVERGREEN_DP_SEC_ASP_ENABLE | /* Audio packet transmission */
EVERGREEN_DP_SEC_ATP_ENABLE | /* Audio timestamp packet transmission */
EVERGREEN_DP_SEC_AIP_ENABLE | /* Audio infoframe packet transmission */
EVERGREEN_DP_SEC_STREAM_ENABLE); /* Master enable for secondary stream engine */
} else {
WREG32(EVERGREEN_DP_SEC_CNTL + dig->afmt->offset, 0);
WREG32_AND(AFMT_AUDIO_PACKET_CONTROL + dig->afmt->offset,
~AFMT_AUDIO_SAMPLE_SEND);
}
dig->afmt->enabled = enable;
}