linux_dsm_epyc7002/drivers/net/ethernet/tile/tilegx.c

2281 lines
64 KiB
C
Raw Normal View History

/*
* Copyright 2012 Tilera Corporation. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation, version 2.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for
* more details.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/moduleparam.h>
#include <linux/sched.h>
#include <linux/kernel.h> /* printk() */
#include <linux/slab.h> /* kmalloc() */
#include <linux/errno.h> /* error codes */
#include <linux/types.h> /* size_t */
#include <linux/interrupt.h>
#include <linux/in.h>
#include <linux/irq.h>
#include <linux/netdevice.h> /* struct device, and other headers */
#include <linux/etherdevice.h> /* eth_type_trans */
#include <linux/skbuff.h>
#include <linux/ioctl.h>
#include <linux/cdev.h>
#include <linux/hugetlb.h>
#include <linux/in6.h>
#include <linux/timer.h>
#include <linux/hrtimer.h>
#include <linux/ktime.h>
#include <linux/io.h>
#include <linux/ctype.h>
#include <linux/ip.h>
#include <linux/ipv6.h>
#include <linux/tcp.h>
#include <linux/net_tstamp.h>
#include <linux/ptp_clock_kernel.h>
#include <asm/checksum.h>
#include <asm/homecache.h>
#include <gxio/mpipe.h>
#include <arch/sim.h>
/* Default transmit lockup timeout period, in jiffies. */
#define TILE_NET_TIMEOUT (5 * HZ)
/* The maximum number of distinct channels (idesc.channel is 5 bits). */
#define TILE_NET_CHANNELS 32
/* Maximum number of idescs to handle per "poll". */
#define TILE_NET_BATCH 128
/* Maximum number of packets to handle per "poll". */
#define TILE_NET_WEIGHT 64
/* Number of entries in each iqueue. */
#define IQUEUE_ENTRIES 512
/* Number of entries in each equeue. */
#define EQUEUE_ENTRIES 2048
/* Total header bytes per equeue slot. Must be big enough for 2 bytes
* of NET_IP_ALIGN alignment, plus 14 bytes (?) of L2 header, plus up to
* 60 bytes of actual TCP header. We round up to align to cache lines.
*/
#define HEADER_BYTES 128
/* Maximum completions per cpu per device (must be a power of two).
* ISSUE: What is the right number here? If this is too small, then
* egress might block waiting for free space in a completions array.
* ISSUE: At the least, allocate these only for initialized echannels.
*/
#define TILE_NET_MAX_COMPS 64
#define MAX_FRAGS (MAX_SKB_FRAGS + 1)
/* The "kinds" of buffer stacks (small/large/jumbo). */
#define MAX_KINDS 3
/* Size of completions data to allocate.
* ISSUE: Probably more than needed since we don't use all the channels.
*/
#define COMPS_SIZE (TILE_NET_CHANNELS * sizeof(struct tile_net_comps))
/* Size of NotifRing data to allocate. */
#define NOTIF_RING_SIZE (IQUEUE_ENTRIES * sizeof(gxio_mpipe_idesc_t))
/* Timeout to wake the per-device TX timer after we stop the queue.
* We don't want the timeout too short (adds overhead, and might end
* up causing stop/wake/stop/wake cycles) or too long (affects performance).
* For the 10 Gb NIC, 30 usec means roughly 30+ 1500-byte packets.
*/
#define TX_TIMER_DELAY_USEC 30
/* Timeout to wake the per-cpu egress timer to free completions. */
#define EGRESS_TIMER_DELAY_USEC 1000
MODULE_AUTHOR("Tilera Corporation");
MODULE_LICENSE("GPL");
/* A "packet fragment" (a chunk of memory). */
struct frag {
void *buf;
size_t length;
};
/* A single completion. */
struct tile_net_comp {
/* The "complete_count" when the completion will be complete. */
s64 when;
/* The buffer to be freed when the completion is complete. */
struct sk_buff *skb;
};
/* The completions for a given cpu and echannel. */
struct tile_net_comps {
/* The completions. */
struct tile_net_comp comp_queue[TILE_NET_MAX_COMPS];
/* The number of completions used. */
unsigned long comp_next;
/* The number of completions freed. */
unsigned long comp_last;
};
/* The transmit wake timer for a given cpu and echannel. */
struct tile_net_tx_wake {
int tx_queue_idx;
struct hrtimer timer;
struct net_device *dev;
};
/* Info for a specific cpu. */
struct tile_net_info {
/* Our cpu. */
int my_cpu;
/* A timer for handling egress completions. */
struct hrtimer egress_timer;
/* True if "egress_timer" is scheduled. */
bool egress_timer_scheduled;
struct info_mpipe {
/* Packet queue. */
gxio_mpipe_iqueue_t iqueue;
/* The NAPI struct. */
struct napi_struct napi;
/* Number of buffers (by kind) which must still be provided. */
unsigned int num_needed_buffers[MAX_KINDS];
/* instance id. */
int instance;
/* True if iqueue is valid. */
bool has_iqueue;
/* NAPI flags. */
bool napi_added;
bool napi_enabled;
/* Comps for each egress channel. */
struct tile_net_comps *comps_for_echannel[TILE_NET_CHANNELS];
/* Transmit wake timer for each egress channel. */
struct tile_net_tx_wake tx_wake[TILE_NET_CHANNELS];
} mpipe[NR_MPIPE_MAX];
};
/* Info for egress on a particular egress channel. */
struct tile_net_egress {
/* The "equeue". */
gxio_mpipe_equeue_t *equeue;
/* The headers for TSO. */
unsigned char *headers;
};
/* Info for a specific device. */
struct tile_net_priv {
/* Our network device. */
struct net_device *dev;
/* The primary link. */
gxio_mpipe_link_t link;
/* The primary channel, if open, else -1. */
int channel;
/* The "loopify" egress link, if needed. */
gxio_mpipe_link_t loopify_link;
/* The "loopify" egress channel, if open, else -1. */
int loopify_channel;
/* The egress channel (channel or loopify_channel). */
int echannel;
/* mPIPE instance, 0 or 1. */
int instance;
/* The timestamp config. */
struct hwtstamp_config stamp_cfg;
};
static struct mpipe_data {
/* The ingress irq. */
int ingress_irq;
/* The "context" for all devices. */
gxio_mpipe_context_t context;
/* Egress info, indexed by "priv->echannel"
* (lazily created as needed).
*/
struct tile_net_egress
egress_for_echannel[TILE_NET_CHANNELS];
/* Devices currently associated with each channel.
* NOTE: The array entry can become NULL after ifconfig down, but
* we do not free the underlying net_device structures, so it is
* safe to use a pointer after reading it from this array.
*/
struct net_device
*tile_net_devs_for_channel[TILE_NET_CHANNELS];
/* The actual memory allocated for the buffer stacks. */
void *buffer_stack_vas[MAX_KINDS];
/* The amount of memory allocated for each buffer stack. */
size_t buffer_stack_bytes[MAX_KINDS];
/* The first buffer stack index
* (small = +0, large = +1, jumbo = +2).
*/
int first_buffer_stack;
/* The buckets. */
int first_bucket;
int num_buckets;
/* PTP-specific data. */
struct ptp_clock *ptp_clock;
struct ptp_clock_info caps;
/* Lock for ptp accessors. */
struct mutex ptp_lock;
} mpipe_data[NR_MPIPE_MAX] = {
[0 ... (NR_MPIPE_MAX - 1)] {
.ingress_irq = -1,
.first_buffer_stack = -1,
.first_bucket = -1,
.num_buckets = 1
}
};
/* A mutex for "tile_net_devs_for_channel". */
static DEFINE_MUTEX(tile_net_devs_for_channel_mutex);
/* The per-cpu info. */
static DEFINE_PER_CPU(struct tile_net_info, per_cpu_info);
/* The buffer size enums for each buffer stack.
* See arch/tile/include/gxio/mpipe.h for the set of possible values.
* We avoid the "10384" size because it can induce "false chaining"
* on "cut-through" jumbo packets.
*/
static gxio_mpipe_buffer_size_enum_t buffer_size_enums[MAX_KINDS] = {
GXIO_MPIPE_BUFFER_SIZE_128,
GXIO_MPIPE_BUFFER_SIZE_1664,
GXIO_MPIPE_BUFFER_SIZE_16384
};
/* Text value of tile_net.cpus if passed as a module parameter. */
static char *network_cpus_string;
/* The actual cpus in "network_cpus". */
static struct cpumask network_cpus_map;
/* If "tile_net.loopify=LINK" was specified, this is "LINK". */
static char *loopify_link_name;
/* If "tile_net.custom" was specified, this is true. */
static bool custom_flag;
/* If "tile_net.jumbo=NUM" was specified, this is "NUM". */
static uint jumbo_num;
/* Obtain mpipe instance from struct tile_net_priv given struct net_device. */
static inline int mpipe_instance(struct net_device *dev)
{
struct tile_net_priv *priv = netdev_priv(dev);
return priv->instance;
}
/* The "tile_net.cpus" argument specifies the cpus that are dedicated
* to handle ingress packets.
*
* The parameter should be in the form "tile_net.cpus=m-n[,x-y]", where
* m, n, x, y are integer numbers that represent the cpus that can be
* neither a dedicated cpu nor a dataplane cpu.
*/
static bool network_cpus_init(void)
{
int rc;
if (network_cpus_string == NULL)
return false;
rc = cpulist_parse_crop(network_cpus_string, &network_cpus_map);
if (rc != 0) {
pr_warn("tile_net.cpus=%s: malformed cpu list\n",
network_cpus_string);
return false;
}
/* Remove dedicated cpus. */
cpumask_and(&network_cpus_map, &network_cpus_map, cpu_possible_mask);
if (cpumask_empty(&network_cpus_map)) {
pr_warn("Ignoring empty tile_net.cpus='%s'.\n",
network_cpus_string);
return false;
}
pr_info("Linux network CPUs: %*pbl\n",
cpumask_pr_args(&network_cpus_map));
return true;
}
module_param_named(cpus, network_cpus_string, charp, 0444);
MODULE_PARM_DESC(cpus, "cpulist of cores that handle network interrupts");
/* The "tile_net.loopify=LINK" argument causes the named device to
* actually use "loop0" for ingress, and "loop1" for egress. This
* allows an app to sit between the actual link and linux, passing
* (some) packets along to linux, and forwarding (some) packets sent
* out by linux.
*/
module_param_named(loopify, loopify_link_name, charp, 0444);
MODULE_PARM_DESC(loopify, "name the device to use loop0/1 for ingress/egress");
/* The "tile_net.custom" argument causes us to ignore the "conventional"
* classifier metadata, in particular, the "l2_offset".
*/
module_param_named(custom, custom_flag, bool, 0444);
MODULE_PARM_DESC(custom, "indicates a (heavily) customized classifier");
/* The "tile_net.jumbo" argument causes us to support "jumbo" packets,
* and to allocate the given number of "jumbo" buffers.
*/
module_param_named(jumbo, jumbo_num, uint, 0444);
MODULE_PARM_DESC(jumbo, "the number of buffers to support jumbo packets");
/* Atomically update a statistics field.
* Note that on TILE-Gx, this operation is fire-and-forget on the
* issuing core (single-cycle dispatch) and takes only a few cycles
* longer than a regular store when the request reaches the home cache.
* No expensive bus management overhead is required.
*/
static void tile_net_stats_add(unsigned long value, unsigned long *field)
{
BUILD_BUG_ON(sizeof(atomic_long_t) != sizeof(unsigned long));
atomic_long_add(value, (atomic_long_t *)field);
}
/* Allocate and push a buffer. */
static bool tile_net_provide_buffer(int instance, int kind)
{
struct mpipe_data *md = &mpipe_data[instance];
gxio_mpipe_buffer_size_enum_t bse = buffer_size_enums[kind];
size_t bs = gxio_mpipe_buffer_size_enum_to_buffer_size(bse);
const unsigned long buffer_alignment = 128;
struct sk_buff *skb;
int len;
len = sizeof(struct sk_buff **) + buffer_alignment + bs;
skb = dev_alloc_skb(len);
if (skb == NULL)
return false;
/* Make room for a back-pointer to 'skb' and guarantee alignment. */
skb_reserve(skb, sizeof(struct sk_buff **));
skb_reserve(skb, -(long)skb->data & (buffer_alignment - 1));
/* Save a back-pointer to 'skb'. */
*(struct sk_buff **)(skb->data - sizeof(struct sk_buff **)) = skb;
/* Make sure "skb" and the back-pointer have been flushed. */
wmb();
gxio_mpipe_push_buffer(&md->context, md->first_buffer_stack + kind,
(void *)va_to_tile_io_addr(skb->data));
return true;
}
/* Convert a raw mpipe buffer to its matching skb pointer. */
static struct sk_buff *mpipe_buf_to_skb(void *va)
{
/* Acquire the associated "skb". */
struct sk_buff **skb_ptr = va - sizeof(*skb_ptr);
struct sk_buff *skb = *skb_ptr;
/* Paranoia. */
if (skb->data != va) {
/* Panic here since there's a reasonable chance
* that corrupt buffers means generic memory
* corruption, with unpredictable system effects.
*/
panic("Corrupt linux buffer! va=%p, skb=%p, skb->data=%p",
va, skb, skb->data);
}
return skb;
}
static void tile_net_pop_all_buffers(int instance, int stack)
{
struct mpipe_data *md = &mpipe_data[instance];
for (;;) {
tile_io_addr_t addr =
(tile_io_addr_t)gxio_mpipe_pop_buffer(&md->context,
stack);
if (addr == 0)
break;
dev_kfree_skb_irq(mpipe_buf_to_skb(tile_io_addr_to_va(addr)));
}
}
/* Provide linux buffers to mPIPE. */
static void tile_net_provide_needed_buffers(void)
{
struct tile_net_info *info = this_cpu_ptr(&per_cpu_info);
int instance, kind;
for (instance = 0; instance < NR_MPIPE_MAX &&
info->mpipe[instance].has_iqueue; instance++) {
for (kind = 0; kind < MAX_KINDS; kind++) {
while (info->mpipe[instance].num_needed_buffers[kind]
!= 0) {
if (!tile_net_provide_buffer(instance, kind)) {
pr_notice("Tile %d still needs"
" some buffers\n",
info->my_cpu);
return;
}
info->mpipe[instance].
num_needed_buffers[kind]--;
}
}
}
}
/* Get RX timestamp, and store it in the skb. */
static void tile_rx_timestamp(struct tile_net_priv *priv, struct sk_buff *skb,
gxio_mpipe_idesc_t *idesc)
{
if (unlikely(priv->stamp_cfg.rx_filter != HWTSTAMP_FILTER_NONE)) {
struct skb_shared_hwtstamps *shhwtstamps = skb_hwtstamps(skb);
memset(shhwtstamps, 0, sizeof(*shhwtstamps));
shhwtstamps->hwtstamp = ktime_set(idesc->time_stamp_sec,
idesc->time_stamp_ns);
}
}
/* Get TX timestamp, and store it in the skb. */
static void tile_tx_timestamp(struct sk_buff *skb, int instance)
{
struct skb_shared_info *shtx = skb_shinfo(skb);
if (unlikely((shtx->tx_flags & SKBTX_HW_TSTAMP) != 0)) {
struct mpipe_data *md = &mpipe_data[instance];
struct skb_shared_hwtstamps shhwtstamps;
struct timespec ts;
shtx->tx_flags |= SKBTX_IN_PROGRESS;
gxio_mpipe_get_timestamp(&md->context, &ts);
memset(&shhwtstamps, 0, sizeof(shhwtstamps));
shhwtstamps.hwtstamp = ktime_set(ts.tv_sec, ts.tv_nsec);
skb_tstamp_tx(skb, &shhwtstamps);
}
}
/* Use ioctl() to enable or disable TX or RX timestamping. */
static int tile_hwtstamp_set(struct net_device *dev, struct ifreq *rq)
{
struct hwtstamp_config config;
struct tile_net_priv *priv = netdev_priv(dev);
if (copy_from_user(&config, rq->ifr_data, sizeof(config)))
return -EFAULT;
if (config.flags) /* reserved for future extensions */
return -EINVAL;
switch (config.tx_type) {
case HWTSTAMP_TX_OFF:
case HWTSTAMP_TX_ON:
break;
default:
return -ERANGE;
}
switch (config.rx_filter) {
case HWTSTAMP_FILTER_NONE:
break;
case HWTSTAMP_FILTER_ALL:
case HWTSTAMP_FILTER_SOME:
case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
case HWTSTAMP_FILTER_PTP_V2_EVENT:
case HWTSTAMP_FILTER_PTP_V2_SYNC:
case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
config.rx_filter = HWTSTAMP_FILTER_ALL;
break;
default:
return -ERANGE;
}
if (copy_to_user(rq->ifr_data, &config, sizeof(config)))
return -EFAULT;
priv->stamp_cfg = config;
return 0;
}
static int tile_hwtstamp_get(struct net_device *dev, struct ifreq *rq)
{
struct tile_net_priv *priv = netdev_priv(dev);
if (copy_to_user(rq->ifr_data, &priv->stamp_cfg,
sizeof(priv->stamp_cfg)))
return -EFAULT;
return 0;
}
static inline bool filter_packet(struct net_device *dev, void *buf)
{
/* Filter packets received before we're up. */
if (dev == NULL || !(dev->flags & IFF_UP))
return true;
/* Filter out packets that aren't for us. */
if (!(dev->flags & IFF_PROMISC) &&
!is_multicast_ether_addr(buf) &&
!ether_addr_equal(dev->dev_addr, buf))
return true;
return false;
}
static void tile_net_receive_skb(struct net_device *dev, struct sk_buff *skb,
gxio_mpipe_idesc_t *idesc, unsigned long len)
{
struct tile_net_info *info = this_cpu_ptr(&per_cpu_info);
struct tile_net_priv *priv = netdev_priv(dev);
int instance = priv->instance;
/* Encode the actual packet length. */
skb_put(skb, len);
skb->protocol = eth_type_trans(skb, dev);
/* Acknowledge "good" hardware checksums. */
if (idesc->cs && idesc->csum_seed_val == 0xFFFF)
skb->ip_summed = CHECKSUM_UNNECESSARY;
/* Get RX timestamp from idesc. */
tile_rx_timestamp(priv, skb, idesc);
napi_gro_receive(&info->mpipe[instance].napi, skb);
/* Update stats. */
tile_net_stats_add(1, &dev->stats.rx_packets);
tile_net_stats_add(len, &dev->stats.rx_bytes);
/* Need a new buffer. */
if (idesc->size == buffer_size_enums[0])
info->mpipe[instance].num_needed_buffers[0]++;
else if (idesc->size == buffer_size_enums[1])
info->mpipe[instance].num_needed_buffers[1]++;
else
info->mpipe[instance].num_needed_buffers[2]++;
}
/* Handle a packet. Return true if "processed", false if "filtered". */
static bool tile_net_handle_packet(int instance, gxio_mpipe_idesc_t *idesc)
{
struct tile_net_info *info = this_cpu_ptr(&per_cpu_info);
struct mpipe_data *md = &mpipe_data[instance];
struct net_device *dev = md->tile_net_devs_for_channel[idesc->channel];
uint8_t l2_offset;
void *va;
void *buf;
unsigned long len;
bool filter;
/* Drop packets for which no buffer was available (which can
* happen under heavy load), or for which the me/tr/ce flags
* are set (which can happen for jumbo cut-through packets,
* or with a customized classifier).
*/
if (idesc->be || idesc->me || idesc->tr || idesc->ce) {
if (dev)
tile_net_stats_add(1, &dev->stats.rx_errors);
goto drop;
}
/* Get the "l2_offset", if allowed. */
l2_offset = custom_flag ? 0 : gxio_mpipe_idesc_get_l2_offset(idesc);
/* Get the VA (including NET_IP_ALIGN bytes of "headroom"). */
va = tile_io_addr_to_va((unsigned long)idesc->va);
/* Get the actual packet start/length. */
buf = va + l2_offset;
len = idesc->l2_size - l2_offset;
/* Point "va" at the raw buffer. */
va -= NET_IP_ALIGN;
filter = filter_packet(dev, buf);
if (filter) {
if (dev)
tile_net_stats_add(1, &dev->stats.rx_dropped);
drop:
gxio_mpipe_iqueue_drop(&info->mpipe[instance].iqueue, idesc);
} else {
struct sk_buff *skb = mpipe_buf_to_skb(va);
/* Skip headroom, and any custom header. */
skb_reserve(skb, NET_IP_ALIGN + l2_offset);
tile_net_receive_skb(dev, skb, idesc, len);
}
gxio_mpipe_iqueue_consume(&info->mpipe[instance].iqueue, idesc);
return !filter;
}
/* Handle some packets for the current CPU.
*
* This function handles up to TILE_NET_BATCH idescs per call.
*
* ISSUE: Since we do not provide new buffers until this function is
* complete, we must initially provide enough buffers for each network
* cpu to fill its iqueue and also its batched idescs.
*
* ISSUE: The "rotting packet" race condition occurs if a packet
* arrives after the queue appears to be empty, and before the
* hypervisor interrupt is re-enabled.
*/
static int tile_net_poll(struct napi_struct *napi, int budget)
{
struct tile_net_info *info = this_cpu_ptr(&per_cpu_info);
unsigned int work = 0;
gxio_mpipe_idesc_t *idesc;
int instance, i, n;
struct mpipe_data *md;
struct info_mpipe *info_mpipe =
container_of(napi, struct info_mpipe, napi);
if (budget <= 0)
goto done;
instance = info_mpipe->instance;
while ((n = gxio_mpipe_iqueue_try_peek(
&info_mpipe->iqueue,
&idesc)) > 0) {
for (i = 0; i < n; i++) {
if (i == TILE_NET_BATCH)
goto done;
if (tile_net_handle_packet(instance,
idesc + i)) {
if (++work >= budget)
goto done;
}
}
}
/* There are no packets left. */
napi_complete(&info_mpipe->napi);
md = &mpipe_data[instance];
/* Re-enable hypervisor interrupts. */
gxio_mpipe_enable_notif_ring_interrupt(
&md->context, info->mpipe[instance].iqueue.ring);
/* HACK: Avoid the "rotting packet" problem. */
if (gxio_mpipe_iqueue_try_peek(&info_mpipe->iqueue, &idesc) > 0)
napi_schedule(&info_mpipe->napi);
/* ISSUE: Handle completions? */
done:
tile_net_provide_needed_buffers();
return work;
}
/* Handle an ingress interrupt from an instance on the current cpu. */
static irqreturn_t tile_net_handle_ingress_irq(int irq, void *id)
{
struct tile_net_info *info = this_cpu_ptr(&per_cpu_info);
napi_schedule(&info->mpipe[(uint64_t)id].napi);
return IRQ_HANDLED;
}
/* Free some completions. This must be called with interrupts blocked. */
static int tile_net_free_comps(gxio_mpipe_equeue_t *equeue,
struct tile_net_comps *comps,
int limit, bool force_update)
{
int n = 0;
while (comps->comp_last < comps->comp_next) {
unsigned int cid = comps->comp_last % TILE_NET_MAX_COMPS;
struct tile_net_comp *comp = &comps->comp_queue[cid];
if (!gxio_mpipe_equeue_is_complete(equeue, comp->when,
force_update || n == 0))
break;
dev_kfree_skb_irq(comp->skb);
comps->comp_last++;
if (++n == limit)
break;
}
return n;
}
/* Add a completion. This must be called with interrupts blocked.
* tile_net_equeue_try_reserve() will have ensured a free completion entry.
*/
static void add_comp(gxio_mpipe_equeue_t *equeue,
struct tile_net_comps *comps,
uint64_t when, struct sk_buff *skb)
{
int cid = comps->comp_next % TILE_NET_MAX_COMPS;
comps->comp_queue[cid].when = when;
comps->comp_queue[cid].skb = skb;
comps->comp_next++;
}
static void tile_net_schedule_tx_wake_timer(struct net_device *dev,
int tx_queue_idx)
{
struct tile_net_info *info = &per_cpu(per_cpu_info, tx_queue_idx);
struct tile_net_priv *priv = netdev_priv(dev);
int instance = priv->instance;
struct tile_net_tx_wake *tx_wake =
&info->mpipe[instance].tx_wake[priv->echannel];
hrtimer_start(&tx_wake->timer,
ktime_set(0, TX_TIMER_DELAY_USEC * 1000UL),
HRTIMER_MODE_REL_PINNED);
}
static enum hrtimer_restart tile_net_handle_tx_wake_timer(struct hrtimer *t)
{
struct tile_net_tx_wake *tx_wake =
container_of(t, struct tile_net_tx_wake, timer);
netif_wake_subqueue(tx_wake->dev, tx_wake->tx_queue_idx);
return HRTIMER_NORESTART;
}
/* Make sure the egress timer is scheduled. */
static void tile_net_schedule_egress_timer(void)
{
struct tile_net_info *info = this_cpu_ptr(&per_cpu_info);
if (!info->egress_timer_scheduled) {
hrtimer_start(&info->egress_timer,
ktime_set(0, EGRESS_TIMER_DELAY_USEC * 1000UL),
HRTIMER_MODE_REL_PINNED);
info->egress_timer_scheduled = true;
}
}
/* The "function" for "info->egress_timer".
*
* This timer will reschedule itself as long as there are any pending
* completions expected for this tile.
*/
static enum hrtimer_restart tile_net_handle_egress_timer(struct hrtimer *t)
{
struct tile_net_info *info = this_cpu_ptr(&per_cpu_info);
unsigned long irqflags;
bool pending = false;
int i, instance;
local_irq_save(irqflags);
/* The timer is no longer scheduled. */
info->egress_timer_scheduled = false;
/* Free all possible comps for this tile. */
for (instance = 0; instance < NR_MPIPE_MAX &&
info->mpipe[instance].has_iqueue; instance++) {
for (i = 0; i < TILE_NET_CHANNELS; i++) {
struct tile_net_egress *egress =
&mpipe_data[instance].egress_for_echannel[i];
struct tile_net_comps *comps =
info->mpipe[instance].comps_for_echannel[i];
if (!egress || comps->comp_last >= comps->comp_next)
continue;
tile_net_free_comps(egress->equeue, comps, -1, true);
pending = pending ||
(comps->comp_last < comps->comp_next);
}
}
/* Reschedule timer if needed. */
if (pending)
tile_net_schedule_egress_timer();
local_irq_restore(irqflags);
return HRTIMER_NORESTART;
}
/* PTP clock operations. */
static int ptp_mpipe_adjfreq(struct ptp_clock_info *ptp, s32 ppb)
{
int ret = 0;
struct mpipe_data *md = container_of(ptp, struct mpipe_data, caps);
mutex_lock(&md->ptp_lock);
if (gxio_mpipe_adjust_timestamp_freq(&md->context, ppb))
ret = -EINVAL;
mutex_unlock(&md->ptp_lock);
return ret;
}
static int ptp_mpipe_adjtime(struct ptp_clock_info *ptp, s64 delta)
{
int ret = 0;
struct mpipe_data *md = container_of(ptp, struct mpipe_data, caps);
mutex_lock(&md->ptp_lock);
if (gxio_mpipe_adjust_timestamp(&md->context, delta))
ret = -EBUSY;
mutex_unlock(&md->ptp_lock);
return ret;
}
static int ptp_mpipe_gettime(struct ptp_clock_info *ptp, struct timespec *ts)
{
int ret = 0;
struct mpipe_data *md = container_of(ptp, struct mpipe_data, caps);
mutex_lock(&md->ptp_lock);
if (gxio_mpipe_get_timestamp(&md->context, ts))
ret = -EBUSY;
mutex_unlock(&md->ptp_lock);
return ret;
}
static int ptp_mpipe_settime(struct ptp_clock_info *ptp,
const struct timespec *ts)
{
int ret = 0;
struct mpipe_data *md = container_of(ptp, struct mpipe_data, caps);
mutex_lock(&md->ptp_lock);
if (gxio_mpipe_set_timestamp(&md->context, ts))
ret = -EBUSY;
mutex_unlock(&md->ptp_lock);
return ret;
}
static int ptp_mpipe_enable(struct ptp_clock_info *ptp,
struct ptp_clock_request *request, int on)
{
return -EOPNOTSUPP;
}
static struct ptp_clock_info ptp_mpipe_caps = {
.owner = THIS_MODULE,
.name = "mPIPE clock",
.max_adj = 999999999,
.n_ext_ts = 0,
.n_pins = 0,
.pps = 0,
.adjfreq = ptp_mpipe_adjfreq,
.adjtime = ptp_mpipe_adjtime,
.gettime = ptp_mpipe_gettime,
.settime = ptp_mpipe_settime,
.enable = ptp_mpipe_enable,
};
/* Sync mPIPE's timestamp up with Linux system time and register PTP clock. */
static void register_ptp_clock(struct net_device *dev, struct mpipe_data *md)
{
struct timespec ts;
getnstimeofday(&ts);
gxio_mpipe_set_timestamp(&md->context, &ts);
mutex_init(&md->ptp_lock);
md->caps = ptp_mpipe_caps;
md->ptp_clock = ptp_clock_register(&md->caps, NULL);
if (IS_ERR(md->ptp_clock))
netdev_err(dev, "ptp_clock_register failed %ld\n",
PTR_ERR(md->ptp_clock));
}
/* Initialize PTP fields in a new device. */
static void init_ptp_dev(struct tile_net_priv *priv)
{
priv->stamp_cfg.rx_filter = HWTSTAMP_FILTER_NONE;
priv->stamp_cfg.tx_type = HWTSTAMP_TX_OFF;
}
/* Helper functions for "tile_net_update()". */
static void enable_ingress_irq(void *irq)
{
enable_percpu_irq((long)irq, 0);
}
static void disable_ingress_irq(void *irq)
{
disable_percpu_irq((long)irq);
}
/* Helper function for tile_net_open() and tile_net_stop().
* Always called under tile_net_devs_for_channel_mutex.
*/
static int tile_net_update(struct net_device *dev)
{
static gxio_mpipe_rules_t rules; /* too big to fit on the stack */
bool saw_channel = false;
int instance = mpipe_instance(dev);
struct mpipe_data *md = &mpipe_data[instance];
int channel;
int rc;
int cpu;
saw_channel = false;
gxio_mpipe_rules_init(&rules, &md->context);
for (channel = 0; channel < TILE_NET_CHANNELS; channel++) {
if (md->tile_net_devs_for_channel[channel] == NULL)
continue;
if (!saw_channel) {
saw_channel = true;
gxio_mpipe_rules_begin(&rules, md->first_bucket,
md->num_buckets, NULL);
gxio_mpipe_rules_set_headroom(&rules, NET_IP_ALIGN);
}
gxio_mpipe_rules_add_channel(&rules, channel);
}
/* NOTE: This can fail if there is no classifier.
* ISSUE: Can anything else cause it to fail?
*/
rc = gxio_mpipe_rules_commit(&rules);
if (rc != 0) {
netdev_warn(dev, "gxio_mpipe_rules_commit: mpipe[%d] %d\n",
instance, rc);
return -EIO;
}
/* Update all cpus, sequentially (to protect "netif_napi_add()").
* We use on_each_cpu to handle the IPI mask or unmask.
*/
if (!saw_channel)
on_each_cpu(disable_ingress_irq,
(void *)(long)(md->ingress_irq), 1);
for_each_online_cpu(cpu) {
struct tile_net_info *info = &per_cpu(per_cpu_info, cpu);
if (!info->mpipe[instance].has_iqueue)
continue;
if (saw_channel) {
if (!info->mpipe[instance].napi_added) {
netif_napi_add(dev, &info->mpipe[instance].napi,
tile_net_poll, TILE_NET_WEIGHT);
info->mpipe[instance].napi_added = true;
}
if (!info->mpipe[instance].napi_enabled) {
napi_enable(&info->mpipe[instance].napi);
info->mpipe[instance].napi_enabled = true;
}
} else {
if (info->mpipe[instance].napi_enabled) {
napi_disable(&info->mpipe[instance].napi);
info->mpipe[instance].napi_enabled = false;
}
/* FIXME: Drain the iqueue. */
}
}
if (saw_channel)
on_each_cpu(enable_ingress_irq,
(void *)(long)(md->ingress_irq), 1);
/* HACK: Allow packets to flow in the simulator. */
if (saw_channel)
sim_enable_mpipe_links(instance, -1);
return 0;
}
/* Initialize a buffer stack. */
static int create_buffer_stack(struct net_device *dev,
int kind, size_t num_buffers)
{
pte_t hash_pte = pte_set_home((pte_t) { 0 }, PAGE_HOME_HASH);
int instance = mpipe_instance(dev);
struct mpipe_data *md = &mpipe_data[instance];
size_t needed = gxio_mpipe_calc_buffer_stack_bytes(num_buffers);
int stack_idx = md->first_buffer_stack + kind;
void *va;
int i, rc;
/* Round up to 64KB and then use alloc_pages() so we get the
* required 64KB alignment.
*/
md->buffer_stack_bytes[kind] =
ALIGN(needed, 64 * 1024);
va = alloc_pages_exact(md->buffer_stack_bytes[kind], GFP_KERNEL);
if (va == NULL) {
netdev_err(dev,
"Could not alloc %zd bytes for buffer stack %d\n",
md->buffer_stack_bytes[kind], kind);
return -ENOMEM;
}
/* Initialize the buffer stack. */
rc = gxio_mpipe_init_buffer_stack(&md->context, stack_idx,
buffer_size_enums[kind], va,
md->buffer_stack_bytes[kind], 0);
if (rc != 0) {
netdev_err(dev, "gxio_mpipe_init_buffer_stack: mpipe[%d] %d\n",
instance, rc);
free_pages_exact(va, md->buffer_stack_bytes[kind]);
return rc;
}
md->buffer_stack_vas[kind] = va;
rc = gxio_mpipe_register_client_memory(&md->context, stack_idx,
hash_pte, 0);
if (rc != 0) {
netdev_err(dev,
"gxio_mpipe_register_client_memory: mpipe[%d] %d\n",
instance, rc);
return rc;
}
/* Provide initial buffers. */
for (i = 0; i < num_buffers; i++) {
if (!tile_net_provide_buffer(instance, kind)) {
netdev_err(dev, "Cannot allocate initial sk_bufs!\n");
return -ENOMEM;
}
}
return 0;
}
/* Allocate and initialize mpipe buffer stacks, and register them in
* the mPIPE TLBs, for small, large, and (possibly) jumbo packet sizes.
* This routine supports tile_net_init_mpipe(), below.
*/
static int init_buffer_stacks(struct net_device *dev,
int network_cpus_count)
{
int num_kinds = MAX_KINDS - (jumbo_num == 0);
size_t num_buffers;
int rc;
int instance = mpipe_instance(dev);
struct mpipe_data *md = &mpipe_data[instance];
/* Allocate the buffer stacks. */
rc = gxio_mpipe_alloc_buffer_stacks(&md->context, num_kinds, 0, 0);
if (rc < 0) {
netdev_err(dev,
"gxio_mpipe_alloc_buffer_stacks: mpipe[%d] %d\n",
instance, rc);
return rc;
}
md->first_buffer_stack = rc;
/* Enough small/large buffers to (normally) avoid buffer errors. */
num_buffers =
network_cpus_count * (IQUEUE_ENTRIES + TILE_NET_BATCH);
/* Allocate the small memory stack. */
if (rc >= 0)
rc = create_buffer_stack(dev, 0, num_buffers);
/* Allocate the large buffer stack. */
if (rc >= 0)
rc = create_buffer_stack(dev, 1, num_buffers);
/* Allocate the jumbo buffer stack if needed. */
if (rc >= 0 && jumbo_num != 0)
rc = create_buffer_stack(dev, 2, jumbo_num);
return rc;
}
/* Allocate per-cpu resources (memory for completions and idescs).
* This routine supports tile_net_init_mpipe(), below.
*/
static int alloc_percpu_mpipe_resources(struct net_device *dev,
int cpu, int ring)
{
struct tile_net_info *info = &per_cpu(per_cpu_info, cpu);
int order, i, rc;
int instance = mpipe_instance(dev);
struct mpipe_data *md = &mpipe_data[instance];
struct page *page;
void *addr;
/* Allocate the "comps". */
order = get_order(COMPS_SIZE);
page = homecache_alloc_pages(GFP_KERNEL, order, cpu);
if (page == NULL) {
netdev_err(dev, "Failed to alloc %zd bytes comps memory\n",
COMPS_SIZE);
return -ENOMEM;
}
addr = pfn_to_kaddr(page_to_pfn(page));
memset(addr, 0, COMPS_SIZE);
for (i = 0; i < TILE_NET_CHANNELS; i++)
info->mpipe[instance].comps_for_echannel[i] =
addr + i * sizeof(struct tile_net_comps);
/* If this is a network cpu, create an iqueue. */
if (cpu_isset(cpu, network_cpus_map)) {
order = get_order(NOTIF_RING_SIZE);
page = homecache_alloc_pages(GFP_KERNEL, order, cpu);
if (page == NULL) {
netdev_err(dev,
"Failed to alloc %zd bytes iqueue memory\n",
NOTIF_RING_SIZE);
return -ENOMEM;
}
addr = pfn_to_kaddr(page_to_pfn(page));
rc = gxio_mpipe_iqueue_init(&info->mpipe[instance].iqueue,
&md->context, ring++, addr,
NOTIF_RING_SIZE, 0);
if (rc < 0) {
netdev_err(dev,
"gxio_mpipe_iqueue_init failed: %d\n", rc);
return rc;
}
info->mpipe[instance].has_iqueue = true;
}
return ring;
}
/* Initialize NotifGroup and buckets.
* This routine supports tile_net_init_mpipe(), below.
*/
static int init_notif_group_and_buckets(struct net_device *dev,
int ring, int network_cpus_count)
{
int group, rc;
int instance = mpipe_instance(dev);
struct mpipe_data *md = &mpipe_data[instance];
/* Allocate one NotifGroup. */
rc = gxio_mpipe_alloc_notif_groups(&md->context, 1, 0, 0);
if (rc < 0) {
netdev_err(dev, "gxio_mpipe_alloc_notif_groups: mpipe[%d] %d\n",
instance, rc);
return rc;
}
group = rc;
/* Initialize global num_buckets value. */
if (network_cpus_count > 4)
md->num_buckets = 256;
else if (network_cpus_count > 1)
md->num_buckets = 16;
/* Allocate some buckets, and set global first_bucket value. */
rc = gxio_mpipe_alloc_buckets(&md->context, md->num_buckets, 0, 0);
if (rc < 0) {
netdev_err(dev, "gxio_mpipe_alloc_buckets: mpipe[%d] %d\n",
instance, rc);
return rc;
}
md->first_bucket = rc;
/* Init group and buckets. */
rc = gxio_mpipe_init_notif_group_and_buckets(
&md->context, group, ring, network_cpus_count,
md->first_bucket, md->num_buckets,
GXIO_MPIPE_BUCKET_STICKY_FLOW_LOCALITY);
if (rc != 0) {
netdev_err(dev, "gxio_mpipe_init_notif_group_and_buckets: "
"mpipe[%d] %d\n", instance, rc);
return rc;
}
return 0;
}
/* Create an irq and register it, then activate the irq and request
* interrupts on all cores. Note that "ingress_irq" being initialized
* is how we know not to call tile_net_init_mpipe() again.
* This routine supports tile_net_init_mpipe(), below.
*/
static int tile_net_setup_interrupts(struct net_device *dev)
{
int cpu, rc, irq;
int instance = mpipe_instance(dev);
struct mpipe_data *md = &mpipe_data[instance];
irq = md->ingress_irq;
if (irq < 0) {
irq = irq_alloc_hwirq(-1);
if (!irq) {
netdev_err(dev,
"create_irq failed: mpipe[%d] %d\n",
instance, irq);
return irq;
}
tile_irq_activate(irq, TILE_IRQ_PERCPU);
rc = request_irq(irq, tile_net_handle_ingress_irq,
0, "tile_net", (void *)((uint64_t)instance));
if (rc != 0) {
netdev_err(dev, "request_irq failed: mpipe[%d] %d\n",
instance, rc);
irq_free_hwirq(irq);
return rc;
}
md->ingress_irq = irq;
}
for_each_online_cpu(cpu) {
struct tile_net_info *info = &per_cpu(per_cpu_info, cpu);
if (info->mpipe[instance].has_iqueue) {
gxio_mpipe_request_notif_ring_interrupt(&md->context,
cpu_x(cpu), cpu_y(cpu), KERNEL_PL, irq,
info->mpipe[instance].iqueue.ring);
}
}
return 0;
}
/* Undo any state set up partially by a failed call to tile_net_init_mpipe. */
static void tile_net_init_mpipe_fail(int instance)
{
int kind, cpu;
struct mpipe_data *md = &mpipe_data[instance];
/* Do cleanups that require the mpipe context first. */
for (kind = 0; kind < MAX_KINDS; kind++) {
if (md->buffer_stack_vas[kind] != NULL) {
tile_net_pop_all_buffers(instance,
md->first_buffer_stack +
kind);
}
}
/* Destroy mpipe context so the hardware no longer owns any memory. */
gxio_mpipe_destroy(&md->context);
for_each_online_cpu(cpu) {
struct tile_net_info *info = &per_cpu(per_cpu_info, cpu);
free_pages(
(unsigned long)(
info->mpipe[instance].comps_for_echannel[0]),
get_order(COMPS_SIZE));
info->mpipe[instance].comps_for_echannel[0] = NULL;
free_pages((unsigned long)(info->mpipe[instance].iqueue.idescs),
get_order(NOTIF_RING_SIZE));
info->mpipe[instance].iqueue.idescs = NULL;
}
for (kind = 0; kind < MAX_KINDS; kind++) {
if (md->buffer_stack_vas[kind] != NULL) {
free_pages_exact(md->buffer_stack_vas[kind],
md->buffer_stack_bytes[kind]);
md->buffer_stack_vas[kind] = NULL;
}
}
md->first_buffer_stack = -1;
md->first_bucket = -1;
}
/* The first time any tilegx network device is opened, we initialize
* the global mpipe state. If this step fails, we fail to open the
* device, but if it succeeds, we never need to do it again, and since
* tile_net can't be unloaded, we never undo it.
*
* Note that some resources in this path (buffer stack indices,
* bindings from init_buffer_stack, etc.) are hypervisor resources
* that are freed implicitly by gxio_mpipe_destroy().
*/
static int tile_net_init_mpipe(struct net_device *dev)
{
int rc;
int cpu;
int first_ring, ring;
int instance = mpipe_instance(dev);
struct mpipe_data *md = &mpipe_data[instance];
int network_cpus_count = cpus_weight(network_cpus_map);
if (!hash_default) {
netdev_err(dev, "Networking requires hash_default!\n");
return -EIO;
}
rc = gxio_mpipe_init(&md->context, instance);
if (rc != 0) {
netdev_err(dev, "gxio_mpipe_init: mpipe[%d] %d\n",
instance, rc);
return -EIO;
}
/* Set up the buffer stacks. */
rc = init_buffer_stacks(dev, network_cpus_count);
if (rc != 0)
goto fail;
/* Allocate one NotifRing for each network cpu. */
rc = gxio_mpipe_alloc_notif_rings(&md->context,
network_cpus_count, 0, 0);
if (rc < 0) {
netdev_err(dev, "gxio_mpipe_alloc_notif_rings failed %d\n",
rc);
goto fail;
}
/* Init NotifRings per-cpu. */
first_ring = rc;
ring = first_ring;
for_each_online_cpu(cpu) {
rc = alloc_percpu_mpipe_resources(dev, cpu, ring);
if (rc < 0)
goto fail;
ring = rc;
}
/* Initialize NotifGroup and buckets. */
rc = init_notif_group_and_buckets(dev, first_ring, network_cpus_count);
if (rc != 0)
goto fail;
/* Create and enable interrupts. */
rc = tile_net_setup_interrupts(dev);
if (rc != 0)
goto fail;
/* Register PTP clock and set mPIPE timestamp, if configured. */
register_ptp_clock(dev, md);
return 0;
fail:
tile_net_init_mpipe_fail(instance);
return rc;
}
/* Create persistent egress info for a given egress channel.
* Note that this may be shared between, say, "gbe0" and "xgbe0".
* ISSUE: Defer header allocation until TSO is actually needed?
*/
static int tile_net_init_egress(struct net_device *dev, int echannel)
{
static int ering = -1;
struct page *headers_page, *edescs_page, *equeue_page;
gxio_mpipe_edesc_t *edescs;
gxio_mpipe_equeue_t *equeue;
unsigned char *headers;
int headers_order, edescs_order, equeue_order;
size_t edescs_size;
int rc = -ENOMEM;
int instance = mpipe_instance(dev);
struct mpipe_data *md = &mpipe_data[instance];
/* Only initialize once. */
if (md->egress_for_echannel[echannel].equeue != NULL)
return 0;
/* Allocate memory for the "headers". */
headers_order = get_order(EQUEUE_ENTRIES * HEADER_BYTES);
headers_page = alloc_pages(GFP_KERNEL, headers_order);
if (headers_page == NULL) {
netdev_warn(dev,
"Could not alloc %zd bytes for TSO headers.\n",
PAGE_SIZE << headers_order);
goto fail;
}
headers = pfn_to_kaddr(page_to_pfn(headers_page));
/* Allocate memory for the "edescs". */
edescs_size = EQUEUE_ENTRIES * sizeof(*edescs);
edescs_order = get_order(edescs_size);
edescs_page = alloc_pages(GFP_KERNEL, edescs_order);
if (edescs_page == NULL) {
netdev_warn(dev,
"Could not alloc %zd bytes for eDMA ring.\n",
edescs_size);
goto fail_headers;
}
edescs = pfn_to_kaddr(page_to_pfn(edescs_page));
/* Allocate memory for the "equeue". */
equeue_order = get_order(sizeof(*equeue));
equeue_page = alloc_pages(GFP_KERNEL, equeue_order);
if (equeue_page == NULL) {
netdev_warn(dev,
"Could not alloc %zd bytes for equeue info.\n",
PAGE_SIZE << equeue_order);
goto fail_edescs;
}
equeue = pfn_to_kaddr(page_to_pfn(equeue_page));
/* Allocate an edma ring (using a one entry "free list"). */
if (ering < 0) {
rc = gxio_mpipe_alloc_edma_rings(&md->context, 1, 0, 0);
if (rc < 0) {
netdev_warn(dev, "gxio_mpipe_alloc_edma_rings: "
"mpipe[%d] %d\n", instance, rc);
goto fail_equeue;
}
ering = rc;
}
/* Initialize the equeue. */
rc = gxio_mpipe_equeue_init(equeue, &md->context, ering, echannel,
edescs, edescs_size, 0);
if (rc != 0) {
netdev_err(dev, "gxio_mpipe_equeue_init: mpipe[%d] %d\n",
instance, rc);
goto fail_equeue;
}
/* Don't reuse the ering later. */
ering = -1;
if (jumbo_num != 0) {
/* Make sure "jumbo" packets can be egressed safely. */
if (gxio_mpipe_equeue_set_snf_size(equeue, 10368) < 0) {
/* ISSUE: There is no "gxio_mpipe_equeue_destroy()". */
netdev_warn(dev, "Jumbo packets may not be egressed"
" properly on channel %d\n", echannel);
}
}
/* Done. */
md->egress_for_echannel[echannel].equeue = equeue;
md->egress_for_echannel[echannel].headers = headers;
return 0;
fail_equeue:
__free_pages(equeue_page, equeue_order);
fail_edescs:
__free_pages(edescs_page, edescs_order);
fail_headers:
__free_pages(headers_page, headers_order);
fail:
return rc;
}
/* Return channel number for a newly-opened link. */
static int tile_net_link_open(struct net_device *dev, gxio_mpipe_link_t *link,
const char *link_name)
{
int instance = mpipe_instance(dev);
struct mpipe_data *md = &mpipe_data[instance];
int rc = gxio_mpipe_link_open(link, &md->context, link_name, 0);
if (rc < 0) {
netdev_err(dev, "Failed to open '%s', mpipe[%d], %d\n",
link_name, instance, rc);
return rc;
}
if (jumbo_num != 0) {
u32 attr = GXIO_MPIPE_LINK_RECEIVE_JUMBO;
rc = gxio_mpipe_link_set_attr(link, attr, 1);
if (rc != 0) {
netdev_err(dev,
"Cannot receive jumbo packets on '%s'\n",
link_name);
gxio_mpipe_link_close(link);
return rc;
}
}
rc = gxio_mpipe_link_channel(link);
if (rc < 0 || rc >= TILE_NET_CHANNELS) {
netdev_err(dev, "gxio_mpipe_link_channel bad value: %d\n", rc);
gxio_mpipe_link_close(link);
return -EINVAL;
}
return rc;
}
/* Help the kernel activate the given network interface. */
static int tile_net_open(struct net_device *dev)
{
struct tile_net_priv *priv = netdev_priv(dev);
int cpu, rc, instance;
mutex_lock(&tile_net_devs_for_channel_mutex);
/* Get the instance info. */
rc = gxio_mpipe_link_instance(dev->name);
if (rc < 0 || rc >= NR_MPIPE_MAX) {
mutex_unlock(&tile_net_devs_for_channel_mutex);
return -EIO;
}
priv->instance = rc;
instance = rc;
if (!mpipe_data[rc].context.mmio_fast_base) {
/* Do one-time initialization per instance the first time
* any device is opened.
*/
rc = tile_net_init_mpipe(dev);
if (rc != 0)
goto fail;
}
/* Determine if this is the "loopify" device. */
if (unlikely((loopify_link_name != NULL) &&
!strcmp(dev->name, loopify_link_name))) {
rc = tile_net_link_open(dev, &priv->link, "loop0");
if (rc < 0)
goto fail;
priv->channel = rc;
rc = tile_net_link_open(dev, &priv->loopify_link, "loop1");
if (rc < 0)
goto fail;
priv->loopify_channel = rc;
priv->echannel = rc;
} else {
rc = tile_net_link_open(dev, &priv->link, dev->name);
if (rc < 0)
goto fail;
priv->channel = rc;
priv->echannel = rc;
}
/* Initialize egress info (if needed). Once ever, per echannel. */
rc = tile_net_init_egress(dev, priv->echannel);
if (rc != 0)
goto fail;
mpipe_data[instance].tile_net_devs_for_channel[priv->channel] = dev;
rc = tile_net_update(dev);
if (rc != 0)
goto fail;
mutex_unlock(&tile_net_devs_for_channel_mutex);
/* Initialize the transmit wake timer for this device for each cpu. */
for_each_online_cpu(cpu) {
struct tile_net_info *info = &per_cpu(per_cpu_info, cpu);
struct tile_net_tx_wake *tx_wake =
&info->mpipe[instance].tx_wake[priv->echannel];
hrtimer_init(&tx_wake->timer, CLOCK_MONOTONIC,
HRTIMER_MODE_REL);
tx_wake->tx_queue_idx = cpu;
tx_wake->timer.function = tile_net_handle_tx_wake_timer;
tx_wake->dev = dev;
}
for_each_online_cpu(cpu)
netif_start_subqueue(dev, cpu);
netif_carrier_on(dev);
return 0;
fail:
if (priv->loopify_channel >= 0) {
if (gxio_mpipe_link_close(&priv->loopify_link) != 0)
netdev_warn(dev, "Failed to close loopify link!\n");
priv->loopify_channel = -1;
}
if (priv->channel >= 0) {
if (gxio_mpipe_link_close(&priv->link) != 0)
netdev_warn(dev, "Failed to close link!\n");
priv->channel = -1;
}
priv->echannel = -1;
mpipe_data[instance].tile_net_devs_for_channel[priv->channel] = NULL;
mutex_unlock(&tile_net_devs_for_channel_mutex);
/* Don't return raw gxio error codes to generic Linux. */
return (rc > -512) ? rc : -EIO;
}
/* Help the kernel deactivate the given network interface. */
static int tile_net_stop(struct net_device *dev)
{
struct tile_net_priv *priv = netdev_priv(dev);
int cpu;
int instance = priv->instance;
struct mpipe_data *md = &mpipe_data[instance];
for_each_online_cpu(cpu) {
struct tile_net_info *info = &per_cpu(per_cpu_info, cpu);
struct tile_net_tx_wake *tx_wake =
&info->mpipe[instance].tx_wake[priv->echannel];
hrtimer_cancel(&tx_wake->timer);
netif_stop_subqueue(dev, cpu);
}
mutex_lock(&tile_net_devs_for_channel_mutex);
md->tile_net_devs_for_channel[priv->channel] = NULL;
(void)tile_net_update(dev);
if (priv->loopify_channel >= 0) {
if (gxio_mpipe_link_close(&priv->loopify_link) != 0)
netdev_warn(dev, "Failed to close loopify link!\n");
priv->loopify_channel = -1;
}
if (priv->channel >= 0) {
if (gxio_mpipe_link_close(&priv->link) != 0)
netdev_warn(dev, "Failed to close link!\n");
priv->channel = -1;
}
priv->echannel = -1;
mutex_unlock(&tile_net_devs_for_channel_mutex);
return 0;
}
/* Determine the VA for a fragment. */
static inline void *tile_net_frag_buf(skb_frag_t *f)
{
unsigned long pfn = page_to_pfn(skb_frag_page(f));
return pfn_to_kaddr(pfn) + f->page_offset;
}
/* Acquire a completion entry and an egress slot, or if we can't,
* stop the queue and schedule the tx_wake timer.
*/
static s64 tile_net_equeue_try_reserve(struct net_device *dev,
int tx_queue_idx,
struct tile_net_comps *comps,
gxio_mpipe_equeue_t *equeue,
int num_edescs)
{
/* Try to acquire a completion entry. */
if (comps->comp_next - comps->comp_last < TILE_NET_MAX_COMPS - 1 ||
tile_net_free_comps(equeue, comps, 32, false) != 0) {
/* Try to acquire an egress slot. */
s64 slot = gxio_mpipe_equeue_try_reserve(equeue, num_edescs);
if (slot >= 0)
return slot;
/* Freeing some completions gives the equeue time to drain. */
tile_net_free_comps(equeue, comps, TILE_NET_MAX_COMPS, false);
slot = gxio_mpipe_equeue_try_reserve(equeue, num_edescs);
if (slot >= 0)
return slot;
}
/* Still nothing; give up and stop the queue for a short while. */
netif_stop_subqueue(dev, tx_queue_idx);
tile_net_schedule_tx_wake_timer(dev, tx_queue_idx);
return -1;
}
/* Determine how many edesc's are needed for TSO.
*
* Sometimes, if "sendfile()" requires copying, we will be called with
* "data" containing the header and payload, with "frags" being empty.
* Sometimes, for example when using NFS over TCP, a single segment can
* span 3 fragments. This requires special care.
*/
static int tso_count_edescs(struct sk_buff *skb)
{
struct skb_shared_info *sh = skb_shinfo(skb);
unsigned int sh_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
unsigned int data_len = skb->len - sh_len;
unsigned int p_len = sh->gso_size;
long f_id = -1; /* id of the current fragment */
long f_size = skb_headlen(skb) - sh_len; /* current fragment size */
long f_used = 0; /* bytes used from the current fragment */
long n; /* size of the current piece of payload */
int num_edescs = 0;
int segment;
for (segment = 0; segment < sh->gso_segs; segment++) {
unsigned int p_used = 0;
/* One edesc for header and for each piece of the payload. */
for (num_edescs++; p_used < p_len; num_edescs++) {
/* Advance as needed. */
while (f_used >= f_size) {
f_id++;
f_size = skb_frag_size(&sh->frags[f_id]);
f_used = 0;
}
/* Use bytes from the current fragment. */
n = p_len - p_used;
if (n > f_size - f_used)
n = f_size - f_used;
f_used += n;
p_used += n;
}
/* The last segment may be less than gso_size. */
data_len -= p_len;
if (data_len < p_len)
p_len = data_len;
}
return num_edescs;
}
/* Prepare modified copies of the skbuff headers. */
static void tso_headers_prepare(struct sk_buff *skb, unsigned char *headers,
s64 slot)
{
struct skb_shared_info *sh = skb_shinfo(skb);
struct iphdr *ih;
struct ipv6hdr *ih6;
struct tcphdr *th;
unsigned int sh_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
unsigned int data_len = skb->len - sh_len;
unsigned char *data = skb->data;
unsigned int ih_off, th_off, p_len;
unsigned int isum_seed, tsum_seed, seq;
unsigned int uninitialized_var(id);
int is_ipv6;
long f_id = -1; /* id of the current fragment */
long f_size = skb_headlen(skb) - sh_len; /* current fragment size */
long f_used = 0; /* bytes used from the current fragment */
long n; /* size of the current piece of payload */
int segment;
/* Locate original headers and compute various lengths. */
is_ipv6 = skb_is_gso_v6(skb);
if (is_ipv6) {
ih6 = ipv6_hdr(skb);
ih_off = skb_network_offset(skb);
} else {
ih = ip_hdr(skb);
ih_off = skb_network_offset(skb);
isum_seed = ((0xFFFF - ih->check) +
(0xFFFF - ih->tot_len) +
(0xFFFF - ih->id));
id = ntohs(ih->id);
}
th = tcp_hdr(skb);
th_off = skb_transport_offset(skb);
p_len = sh->gso_size;
tsum_seed = th->check + (0xFFFF ^ htons(skb->len));
seq = ntohl(th->seq);
/* Prepare all the headers. */
for (segment = 0; segment < sh->gso_segs; segment++) {
unsigned char *buf;
unsigned int p_used = 0;
/* Copy to the header memory for this segment. */
buf = headers + (slot % EQUEUE_ENTRIES) * HEADER_BYTES +
NET_IP_ALIGN;
memcpy(buf, data, sh_len);
/* Update copied ip header. */
if (is_ipv6) {
ih6 = (struct ipv6hdr *)(buf + ih_off);
ih6->payload_len = htons(sh_len + p_len - ih_off -
sizeof(*ih6));
} else {
ih = (struct iphdr *)(buf + ih_off);
ih->tot_len = htons(sh_len + p_len - ih_off);
ih->id = htons(id++);
ih->check = csum_long(isum_seed + ih->tot_len +
ih->id) ^ 0xffff;
}
/* Update copied tcp header. */
th = (struct tcphdr *)(buf + th_off);
th->seq = htonl(seq);
th->check = csum_long(tsum_seed + htons(sh_len + p_len));
if (segment != sh->gso_segs - 1) {
th->fin = 0;
th->psh = 0;
}
/* Skip past the header. */
slot++;
/* Skip past the payload. */
while (p_used < p_len) {
/* Advance as needed. */
while (f_used >= f_size) {
f_id++;
f_size = skb_frag_size(&sh->frags[f_id]);
f_used = 0;
}
/* Use bytes from the current fragment. */
n = p_len - p_used;
if (n > f_size - f_used)
n = f_size - f_used;
f_used += n;
p_used += n;
slot++;
}
seq += p_len;
/* The last segment may be less than gso_size. */
data_len -= p_len;
if (data_len < p_len)
p_len = data_len;
}
/* Flush the headers so they are ready for hardware DMA. */
wmb();
}
/* Pass all the data to mpipe for egress. */
static void tso_egress(struct net_device *dev, gxio_mpipe_equeue_t *equeue,
struct sk_buff *skb, unsigned char *headers, s64 slot)
{
struct skb_shared_info *sh = skb_shinfo(skb);
int instance = mpipe_instance(dev);
struct mpipe_data *md = &mpipe_data[instance];
unsigned int sh_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
unsigned int data_len = skb->len - sh_len;
unsigned int p_len = sh->gso_size;
gxio_mpipe_edesc_t edesc_head = { { 0 } };
gxio_mpipe_edesc_t edesc_body = { { 0 } };
long f_id = -1; /* id of the current fragment */
long f_size = skb_headlen(skb) - sh_len; /* current fragment size */
long f_used = 0; /* bytes used from the current fragment */
void *f_data = skb->data + sh_len;
long n; /* size of the current piece of payload */
unsigned long tx_packets = 0, tx_bytes = 0;
unsigned int csum_start;
int segment;
/* Prepare to egress the headers: set up header edesc. */
csum_start = skb_checksum_start_offset(skb);
edesc_head.csum = 1;
edesc_head.csum_start = csum_start;
edesc_head.csum_dest = csum_start + skb->csum_offset;
edesc_head.xfer_size = sh_len;
/* This is only used to specify the TLB. */
edesc_head.stack_idx = md->first_buffer_stack;
edesc_body.stack_idx = md->first_buffer_stack;
/* Egress all the edescs. */
for (segment = 0; segment < sh->gso_segs; segment++) {
unsigned char *buf;
unsigned int p_used = 0;
/* Egress the header. */
buf = headers + (slot % EQUEUE_ENTRIES) * HEADER_BYTES +
NET_IP_ALIGN;
edesc_head.va = va_to_tile_io_addr(buf);
gxio_mpipe_equeue_put_at(equeue, edesc_head, slot);
slot++;
/* Egress the payload. */
while (p_used < p_len) {
void *va;
/* Advance as needed. */
while (f_used >= f_size) {
f_id++;
f_size = skb_frag_size(&sh->frags[f_id]);
f_data = tile_net_frag_buf(&sh->frags[f_id]);
f_used = 0;
}
va = f_data + f_used;
/* Use bytes from the current fragment. */
n = p_len - p_used;
if (n > f_size - f_used)
n = f_size - f_used;
f_used += n;
p_used += n;
/* Egress a piece of the payload. */
edesc_body.va = va_to_tile_io_addr(va);
edesc_body.xfer_size = n;
edesc_body.bound = !(p_used < p_len);
gxio_mpipe_equeue_put_at(equeue, edesc_body, slot);
slot++;
}
tx_packets++;
tx_bytes += sh_len + p_len;
/* The last segment may be less than gso_size. */
data_len -= p_len;
if (data_len < p_len)
p_len = data_len;
}
/* Update stats. */
tile_net_stats_add(tx_packets, &dev->stats.tx_packets);
tile_net_stats_add(tx_bytes, &dev->stats.tx_bytes);
}
/* Do "TSO" handling for egress.
*
* Normally drivers set NETIF_F_TSO only to support hardware TSO;
* otherwise the stack uses scatter-gather to implement GSO in software.
* On our testing, enabling GSO support (via NETIF_F_SG) drops network
* performance down to around 7.5 Gbps on the 10G interfaces, although
* also dropping cpu utilization way down, to under 8%. But
* implementing "TSO" in the driver brings performance back up to line
* rate, while dropping cpu usage even further, to less than 4%. In
* practice, profiling of GSO shows that skb_segment() is what causes
* the performance overheads; we benefit in the driver from using
* preallocated memory to duplicate the TCP/IP headers.
*/
static int tile_net_tx_tso(struct sk_buff *skb, struct net_device *dev)
{
struct tile_net_info *info = this_cpu_ptr(&per_cpu_info);
struct tile_net_priv *priv = netdev_priv(dev);
int channel = priv->echannel;
int instance = priv->instance;
struct mpipe_data *md = &mpipe_data[instance];
struct tile_net_egress *egress = &md->egress_for_echannel[channel];
struct tile_net_comps *comps =
info->mpipe[instance].comps_for_echannel[channel];
gxio_mpipe_equeue_t *equeue = egress->equeue;
unsigned long irqflags;
int num_edescs;
s64 slot;
/* Determine how many mpipe edesc's are needed. */
num_edescs = tso_count_edescs(skb);
local_irq_save(irqflags);
/* Try to acquire a completion entry and an egress slot. */
slot = tile_net_equeue_try_reserve(dev, skb->queue_mapping, comps,
equeue, num_edescs);
if (slot < 0) {
local_irq_restore(irqflags);
return NETDEV_TX_BUSY;
}
/* Set up copies of header data properly. */
tso_headers_prepare(skb, egress->headers, slot);
/* Actually pass the data to the network hardware. */
tso_egress(dev, equeue, skb, egress->headers, slot);
/* Add a completion record. */
add_comp(equeue, comps, slot + num_edescs - 1, skb);
local_irq_restore(irqflags);
/* Make sure the egress timer is scheduled. */
tile_net_schedule_egress_timer();
return NETDEV_TX_OK;
}
/* Analyze the body and frags for a transmit request. */
static unsigned int tile_net_tx_frags(struct frag *frags,
struct sk_buff *skb,
void *b_data, unsigned int b_len)
{
unsigned int i, n = 0;
struct skb_shared_info *sh = skb_shinfo(skb);
if (b_len != 0) {
frags[n].buf = b_data;
frags[n++].length = b_len;
}
for (i = 0; i < sh->nr_frags; i++) {
skb_frag_t *f = &sh->frags[i];
frags[n].buf = tile_net_frag_buf(f);
frags[n++].length = skb_frag_size(f);
}
return n;
}
/* Help the kernel transmit a packet. */
static int tile_net_tx(struct sk_buff *skb, struct net_device *dev)
{
struct tile_net_info *info = this_cpu_ptr(&per_cpu_info);
struct tile_net_priv *priv = netdev_priv(dev);
int instance = priv->instance;
struct mpipe_data *md = &mpipe_data[instance];
struct tile_net_egress *egress =
&md->egress_for_echannel[priv->echannel];
gxio_mpipe_equeue_t *equeue = egress->equeue;
struct tile_net_comps *comps =
info->mpipe[instance].comps_for_echannel[priv->echannel];
unsigned int len = skb->len;
unsigned char *data = skb->data;
unsigned int num_edescs;
struct frag frags[MAX_FRAGS];
gxio_mpipe_edesc_t edescs[MAX_FRAGS];
unsigned long irqflags;
gxio_mpipe_edesc_t edesc = { { 0 } };
unsigned int i;
s64 slot;
if (skb_is_gso(skb))
return tile_net_tx_tso(skb, dev);
num_edescs = tile_net_tx_frags(frags, skb, data, skb_headlen(skb));
/* This is only used to specify the TLB. */
edesc.stack_idx = md->first_buffer_stack;
/* Prepare the edescs. */
for (i = 0; i < num_edescs; i++) {
edesc.xfer_size = frags[i].length;
edesc.va = va_to_tile_io_addr(frags[i].buf);
edescs[i] = edesc;
}
/* Mark the final edesc. */
edescs[num_edescs - 1].bound = 1;
/* Add checksum info to the initial edesc, if needed. */
if (skb->ip_summed == CHECKSUM_PARTIAL) {
unsigned int csum_start = skb_checksum_start_offset(skb);
edescs[0].csum = 1;
edescs[0].csum_start = csum_start;
edescs[0].csum_dest = csum_start + skb->csum_offset;
}
local_irq_save(irqflags);
/* Try to acquire a completion entry and an egress slot. */
slot = tile_net_equeue_try_reserve(dev, skb->queue_mapping, comps,
equeue, num_edescs);
if (slot < 0) {
local_irq_restore(irqflags);
return NETDEV_TX_BUSY;
}
for (i = 0; i < num_edescs; i++)
gxio_mpipe_equeue_put_at(equeue, edescs[i], slot++);
/* Store TX timestamp if needed. */
tile_tx_timestamp(skb, instance);
/* Add a completion record. */
add_comp(equeue, comps, slot - 1, skb);
/* NOTE: Use ETH_ZLEN for short packets (e.g. 42 < 60). */
tile_net_stats_add(1, &dev->stats.tx_packets);
tile_net_stats_add(max_t(unsigned int, len, ETH_ZLEN),
&dev->stats.tx_bytes);
local_irq_restore(irqflags);
/* Make sure the egress timer is scheduled. */
tile_net_schedule_egress_timer();
return NETDEV_TX_OK;
}
/* Return subqueue id on this core (one per core). */
net: core: explicitly select a txq before doing l2 forwarding Currently, the tx queue were selected implicitly in ndo_dfwd_start_xmit(). The will cause several issues: - NETIF_F_LLTX were removed for macvlan, so txq lock were done for macvlan instead of lower device which misses the necessary txq synchronization for lower device such as txq stopping or frozen required by dev watchdog or control path. - dev_hard_start_xmit() was called with NULL txq which bypasses the net device watchdog. - dev_hard_start_xmit() does not check txq everywhere which will lead a crash when tso is disabled for lower device. Fix this by explicitly introducing a new param for .ndo_select_queue() for just selecting queues in the case of l2 forwarding offload. netdev_pick_tx() was also extended to accept this parameter and dev_queue_xmit_accel() was used to do l2 forwarding transmission. With this fixes, NETIF_F_LLTX could be preserved for macvlan and there's no need to check txq against NULL in dev_hard_start_xmit(). Also there's no need to keep a dedicated ndo_dfwd_start_xmit() and we can just reuse the code of dev_queue_xmit() to do the transmission. In the future, it was also required for macvtap l2 forwarding support since it provides a necessary synchronization method. Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: e1000-devel@lists.sourceforge.net Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-10 15:18:26 +07:00
static u16 tile_net_select_queue(struct net_device *dev, struct sk_buff *skb,
void *accel_priv, select_queue_fallback_t fallback)
{
return smp_processor_id();
}
/* Deal with a transmit timeout. */
static void tile_net_tx_timeout(struct net_device *dev)
{
int cpu;
for_each_online_cpu(cpu)
netif_wake_subqueue(dev, cpu);
}
/* Ioctl commands. */
static int tile_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
if (cmd == SIOCSHWTSTAMP)
return tile_hwtstamp_set(dev, rq);
if (cmd == SIOCGHWTSTAMP)
return tile_hwtstamp_get(dev, rq);
return -EOPNOTSUPP;
}
/* Change the MTU. */
static int tile_net_change_mtu(struct net_device *dev, int new_mtu)
{
if (new_mtu < 68)
return -EINVAL;
if (new_mtu > ((jumbo_num != 0) ? 9000 : 1500))
return -EINVAL;
dev->mtu = new_mtu;
return 0;
}
/* Change the Ethernet address of the NIC.
*
* The hypervisor driver does not support changing MAC address. However,
* the hardware does not do anything with the MAC address, so the address
* which gets used on outgoing packets, and which is accepted on incoming
* packets, is completely up to us.
*
* Returns 0 on success, negative on failure.
*/
static int tile_net_set_mac_address(struct net_device *dev, void *p)
{
struct sockaddr *addr = p;
if (!is_valid_ether_addr(addr->sa_data))
return -EINVAL;
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
return 0;
}
#ifdef CONFIG_NET_POLL_CONTROLLER
/* Polling 'interrupt' - used by things like netconsole to send skbs
* without having to re-enable interrupts. It's not called while
* the interrupt routine is executing.
*/
static void tile_net_netpoll(struct net_device *dev)
{
int instance = mpipe_instance(dev);
struct tile_net_info *info = this_cpu_ptr(&per_cpu_info);
struct mpipe_data *md = &mpipe_data[instance];
disable_percpu_irq(md->ingress_irq);
napi_schedule(&info->mpipe[instance].napi);
enable_percpu_irq(md->ingress_irq, 0);
}
#endif
static const struct net_device_ops tile_net_ops = {
.ndo_open = tile_net_open,
.ndo_stop = tile_net_stop,
.ndo_start_xmit = tile_net_tx,
.ndo_select_queue = tile_net_select_queue,
.ndo_do_ioctl = tile_net_ioctl,
.ndo_change_mtu = tile_net_change_mtu,
.ndo_tx_timeout = tile_net_tx_timeout,
.ndo_set_mac_address = tile_net_set_mac_address,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = tile_net_netpoll,
#endif
};
/* The setup function.
*
* This uses ether_setup() to assign various fields in dev, including
* setting IFF_BROADCAST and IFF_MULTICAST, then sets some extra fields.
*/
static void tile_net_setup(struct net_device *dev)
{
netdev_features_t features = 0;
ether_setup(dev);
dev->netdev_ops = &tile_net_ops;
dev->watchdog_timeo = TILE_NET_TIMEOUT;
dev->mtu = 1500;
features |= NETIF_F_HW_CSUM;
features |= NETIF_F_SG;
features |= NETIF_F_TSO;
features |= NETIF_F_TSO6;
dev->hw_features |= features;
dev->vlan_features |= features;
dev->features |= features;
}
/* Allocate the device structure, register the device, and obtain the
* MAC address from the hypervisor.
*/
static void tile_net_dev_init(const char *name, const uint8_t *mac)
{
int ret;
struct net_device *dev;
struct tile_net_priv *priv;
/* HACK: Ignore "loop" links. */
if (strncmp(name, "loop", 4) == 0)
return;
/* Allocate the device structure. Normally, "name" is a
* template, instantiated by register_netdev(), but not for us.
*/
dev = alloc_netdev_mqs(sizeof(*priv), name, NET_NAME_UNKNOWN,
tile_net_setup, NR_CPUS, 1);
if (!dev) {
pr_err("alloc_netdev_mqs(%s) failed\n", name);
return;
}
/* Initialize "priv". */
priv = netdev_priv(dev);
priv->dev = dev;
priv->channel = -1;
priv->loopify_channel = -1;
priv->echannel = -1;
init_ptp_dev(priv);
/* Get the MAC address and set it in the device struct; this must
* be done before the device is opened. If the MAC is all zeroes,
* we use a random address, since we're probably on the simulator.
*/
if (!is_zero_ether_addr(mac))
ether_addr_copy(dev->dev_addr, mac);
else
eth_hw_addr_random(dev);
/* Register the network device. */
ret = register_netdev(dev);
if (ret) {
netdev_err(dev, "register_netdev failed %d\n", ret);
free_netdev(dev);
return;
}
}
/* Per-cpu module initialization. */
static void tile_net_init_module_percpu(void *unused)
{
struct tile_net_info *info = this_cpu_ptr(&per_cpu_info);
int my_cpu = smp_processor_id();
int instance;
for (instance = 0; instance < NR_MPIPE_MAX; instance++) {
info->mpipe[instance].has_iqueue = false;
info->mpipe[instance].instance = instance;
}
info->my_cpu = my_cpu;
/* Initialize the egress timer. */
hrtimer_init(&info->egress_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
info->egress_timer.function = tile_net_handle_egress_timer;
}
/* Module initialization. */
static int __init tile_net_init_module(void)
{
int i;
char name[GXIO_MPIPE_LINK_NAME_LEN];
uint8_t mac[6];
pr_info("Tilera Network Driver\n");
BUILD_BUG_ON(NR_MPIPE_MAX != 2);
mutex_init(&tile_net_devs_for_channel_mutex);
/* Initialize each CPU. */
on_each_cpu(tile_net_init_module_percpu, NULL, 1);
/* Find out what devices we have, and initialize them. */
for (i = 0; gxio_mpipe_link_enumerate_mac(i, name, mac) >= 0; i++)
tile_net_dev_init(name, mac);
if (!network_cpus_init())
network_cpus_map = *cpu_online_mask;
return 0;
}
module_init(tile_net_init_module);