linux_dsm_epyc7002/drivers/net/wireless/ath/ath10k/htt_rx.c

2995 lines
80 KiB
C
Raw Normal View History

/*
* Copyright (c) 2005-2011 Atheros Communications Inc.
* Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
ath10k: add sta rx packet stats per tid Added per tid sta counters for the following - Total number MSDUs received from firmware - Number of MSDUs received with errors like decryption, crc, mic ,etc. - Number of MSDUs dropped in the driver - A-MPDU/A-MSDU subframe stats - Number of MSDUS passed to mac80211 All stats other than A-MPDU stats are only for received data frames. A-MPDU stats might have stats for management frames when monitor interface is active where management frames are notified both in wmi and HTT interfaces. These per tid stats can be enabled with tid bitmask through a debugfs like below echo <tid_bitmask> > /sys/kernel/debug/ieee80211/phyX/ath10k/sta_tid_stats_mask tid 16 (tid_bitmask 0x10000) is used for non-qos data/management frames The stats are read from /sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/<sta_mac>/dump_tid_stats Sample output: To enable rx stats for tid 0, 5 and 6, echo 0x00000061 > /sys/kernel/debug/ieee80211/phy0/ath10k/sta_tid_stats_mask cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan15/stations/8c\:fd\:f0\:0a\:8e\:df/dump_tid_stats Driver Rx pkt stats per tid, ([tid] count) ------------------------------------------ MSDUs from FW [00] 2567 [05] 3178 [06] 1089 MSDUs unchained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:chained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:filtered [00] 0 [05] 0 [06] 0 MSDUs queued for mac80211 [00] 2567 [05] 3178 [06] 1089 MSDUs with error:fcs_err [00] 0 [05] 0 [06] 2 MSDUs with error:tkip_err [00] 0 [05] 0 [06] 0 MSDUs with error:crypt_err [00] 0 [05] 0 [06] 0 MSDUs with error:peer_idx_inval [00] 0 [05] 0 [06] 0 A-MPDU num subframes upto 10 [00] 2567 [05] 3178 [06] 1087 A-MPDU num subframes 11-20 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 21-30 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 31-40 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 41-50 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 51-60 [00] 0 [05] 0 [06] 0 A-MPDU num subframes >60 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 1 [00] 2567 [05] 3178 [06] 1089 A-MSDU num subframes 2 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 3 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 4 [00] 0 [05] 0 [06] 0 A-MSDU num subframes >4 [00] 0 [05] 0 [06] 0 Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-14 17:14:06 +07:00
* Copyright (c) 2018, The Linux Foundation. All rights reserved.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include "core.h"
#include "htc.h"
#include "htt.h"
#include "txrx.h"
#include "debug.h"
#include "trace.h"
#include "mac.h"
#include <linux/log2.h>
#include <linux/bitfield.h>
/* when under memory pressure rx ring refill may fail and needs a retry */
#define HTT_RX_RING_REFILL_RETRY_MS 50
#define HTT_RX_RING_REFILL_RESCHED_MS 5
static int ath10k_htt_rx_get_csum_state(struct sk_buff *skb);
static struct sk_buff *
ath10k_htt_rx_find_skb_paddr(struct ath10k *ar, u64 paddr)
{
struct ath10k_skb_rxcb *rxcb;
hash_for_each_possible(ar->htt.rx_ring.skb_table, rxcb, hlist, paddr)
if (rxcb->paddr == paddr)
return ATH10K_RXCB_SKB(rxcb);
WARN_ON_ONCE(1);
return NULL;
}
static void ath10k_htt_rx_ring_free(struct ath10k_htt *htt)
{
struct sk_buff *skb;
struct ath10k_skb_rxcb *rxcb;
struct hlist_node *n;
int i;
if (htt->rx_ring.in_ord_rx) {
hash_for_each_safe(htt->rx_ring.skb_table, i, n, rxcb, hlist) {
skb = ATH10K_RXCB_SKB(rxcb);
dma_unmap_single(htt->ar->dev, rxcb->paddr,
skb->len + skb_tailroom(skb),
DMA_FROM_DEVICE);
hash_del(&rxcb->hlist);
dev_kfree_skb_any(skb);
}
} else {
for (i = 0; i < htt->rx_ring.size; i++) {
skb = htt->rx_ring.netbufs_ring[i];
if (!skb)
continue;
rxcb = ATH10K_SKB_RXCB(skb);
dma_unmap_single(htt->ar->dev, rxcb->paddr,
skb->len + skb_tailroom(skb),
DMA_FROM_DEVICE);
dev_kfree_skb_any(skb);
}
}
htt->rx_ring.fill_cnt = 0;
hash_init(htt->rx_ring.skb_table);
memset(htt->rx_ring.netbufs_ring, 0,
htt->rx_ring.size * sizeof(htt->rx_ring.netbufs_ring[0]));
}
static size_t ath10k_htt_get_rx_ring_size_32(struct ath10k_htt *htt)
{
return htt->rx_ring.size * sizeof(htt->rx_ring.paddrs_ring_32);
}
static size_t ath10k_htt_get_rx_ring_size_64(struct ath10k_htt *htt)
{
return htt->rx_ring.size * sizeof(htt->rx_ring.paddrs_ring_64);
}
static void ath10k_htt_config_paddrs_ring_32(struct ath10k_htt *htt,
void *vaddr)
{
htt->rx_ring.paddrs_ring_32 = vaddr;
}
static void ath10k_htt_config_paddrs_ring_64(struct ath10k_htt *htt,
void *vaddr)
{
htt->rx_ring.paddrs_ring_64 = vaddr;
}
static void ath10k_htt_set_paddrs_ring_32(struct ath10k_htt *htt,
dma_addr_t paddr, int idx)
{
htt->rx_ring.paddrs_ring_32[idx] = __cpu_to_le32(paddr);
}
static void ath10k_htt_set_paddrs_ring_64(struct ath10k_htt *htt,
dma_addr_t paddr, int idx)
{
htt->rx_ring.paddrs_ring_64[idx] = __cpu_to_le64(paddr);
}
static void ath10k_htt_reset_paddrs_ring_32(struct ath10k_htt *htt, int idx)
{
htt->rx_ring.paddrs_ring_32[idx] = 0;
}
static void ath10k_htt_reset_paddrs_ring_64(struct ath10k_htt *htt, int idx)
{
htt->rx_ring.paddrs_ring_64[idx] = 0;
}
static void *ath10k_htt_get_vaddr_ring_32(struct ath10k_htt *htt)
{
return (void *)htt->rx_ring.paddrs_ring_32;
}
static void *ath10k_htt_get_vaddr_ring_64(struct ath10k_htt *htt)
{
return (void *)htt->rx_ring.paddrs_ring_64;
}
static int __ath10k_htt_rx_ring_fill_n(struct ath10k_htt *htt, int num)
{
struct htt_rx_desc *rx_desc;
struct ath10k_skb_rxcb *rxcb;
struct sk_buff *skb;
dma_addr_t paddr;
int ret = 0, idx;
/* The Full Rx Reorder firmware has no way of telling the host
* implicitly when it copied HTT Rx Ring buffers to MAC Rx Ring.
* To keep things simple make sure ring is always half empty. This
* guarantees there'll be no replenishment overruns possible.
*/
BUILD_BUG_ON(HTT_RX_RING_FILL_LEVEL >= HTT_RX_RING_SIZE / 2);
idx = __le32_to_cpu(*htt->rx_ring.alloc_idx.vaddr);
while (num > 0) {
skb = dev_alloc_skb(HTT_RX_BUF_SIZE + HTT_RX_DESC_ALIGN);
if (!skb) {
ret = -ENOMEM;
goto fail;
}
if (!IS_ALIGNED((unsigned long)skb->data, HTT_RX_DESC_ALIGN))
skb_pull(skb,
PTR_ALIGN(skb->data, HTT_RX_DESC_ALIGN) -
skb->data);
/* Clear rx_desc attention word before posting to Rx ring */
rx_desc = (struct htt_rx_desc *)skb->data;
rx_desc->attention.flags = __cpu_to_le32(0);
paddr = dma_map_single(htt->ar->dev, skb->data,
skb->len + skb_tailroom(skb),
DMA_FROM_DEVICE);
if (unlikely(dma_mapping_error(htt->ar->dev, paddr))) {
dev_kfree_skb_any(skb);
ret = -ENOMEM;
goto fail;
}
rxcb = ATH10K_SKB_RXCB(skb);
rxcb->paddr = paddr;
htt->rx_ring.netbufs_ring[idx] = skb;
ath10k_htt_set_paddrs_ring(htt, paddr, idx);
htt->rx_ring.fill_cnt++;
if (htt->rx_ring.in_ord_rx) {
hash_add(htt->rx_ring.skb_table,
&ATH10K_SKB_RXCB(skb)->hlist,
paddr);
}
num--;
idx++;
idx &= htt->rx_ring.size_mask;
}
fail:
/*
* Make sure the rx buffer is updated before available buffer
* index to avoid any potential rx ring corruption.
*/
mb();
*htt->rx_ring.alloc_idx.vaddr = __cpu_to_le32(idx);
return ret;
}
static int ath10k_htt_rx_ring_fill_n(struct ath10k_htt *htt, int num)
{
lockdep_assert_held(&htt->rx_ring.lock);
return __ath10k_htt_rx_ring_fill_n(htt, num);
}
static void ath10k_htt_rx_msdu_buff_replenish(struct ath10k_htt *htt)
{
int ret, num_deficit, num_to_fill;
/* Refilling the whole RX ring buffer proves to be a bad idea. The
* reason is RX may take up significant amount of CPU cycles and starve
* other tasks, e.g. TX on an ethernet device while acting as a bridge
* with ath10k wlan interface. This ended up with very poor performance
* once CPU the host system was overwhelmed with RX on ath10k.
*
* By limiting the number of refills the replenishing occurs
* progressively. This in turns makes use of the fact tasklets are
* processed in FIFO order. This means actual RX processing can starve
* out refilling. If there's not enough buffers on RX ring FW will not
* report RX until it is refilled with enough buffers. This
* automatically balances load wrt to CPU power.
*
* This probably comes at a cost of lower maximum throughput but
* improves the average and stability.
*/
spin_lock_bh(&htt->rx_ring.lock);
num_deficit = htt->rx_ring.fill_level - htt->rx_ring.fill_cnt;
num_to_fill = min(ATH10K_HTT_MAX_NUM_REFILL, num_deficit);
num_deficit -= num_to_fill;
ret = ath10k_htt_rx_ring_fill_n(htt, num_to_fill);
if (ret == -ENOMEM) {
/*
* Failed to fill it to the desired level -
* we'll start a timer and try again next time.
* As long as enough buffers are left in the ring for
* another A-MPDU rx, no special recovery is needed.
*/
mod_timer(&htt->rx_ring.refill_retry_timer, jiffies +
msecs_to_jiffies(HTT_RX_RING_REFILL_RETRY_MS));
} else if (num_deficit > 0) {
mod_timer(&htt->rx_ring.refill_retry_timer, jiffies +
msecs_to_jiffies(HTT_RX_RING_REFILL_RESCHED_MS));
}
spin_unlock_bh(&htt->rx_ring.lock);
}
static void ath10k_htt_rx_ring_refill_retry(struct timer_list *t)
{
struct ath10k_htt *htt = from_timer(htt, t, rx_ring.refill_retry_timer);
ath10k_htt_rx_msdu_buff_replenish(htt);
}
int ath10k_htt_rx_ring_refill(struct ath10k *ar)
{
struct ath10k_htt *htt = &ar->htt;
int ret;
spin_lock_bh(&htt->rx_ring.lock);
ret = ath10k_htt_rx_ring_fill_n(htt, (htt->rx_ring.fill_level -
htt->rx_ring.fill_cnt));
spin_unlock_bh(&htt->rx_ring.lock);
if (ret)
ath10k_htt_rx_ring_free(htt);
return ret;
}
void ath10k_htt_rx_free(struct ath10k_htt *htt)
{
del_timer_sync(&htt->rx_ring.refill_retry_timer);
skb_queue_purge(&htt->rx_msdus_q);
skb_queue_purge(&htt->rx_in_ord_compl_q);
skb_queue_purge(&htt->tx_fetch_ind_q);
ath10k_htt_rx_ring_free(htt);
dma_free_coherent(htt->ar->dev,
ath10k_htt_get_rx_ring_size(htt),
ath10k_htt_get_vaddr_ring(htt),
htt->rx_ring.base_paddr);
dma_free_coherent(htt->ar->dev,
sizeof(*htt->rx_ring.alloc_idx.vaddr),
htt->rx_ring.alloc_idx.vaddr,
htt->rx_ring.alloc_idx.paddr);
kfree(htt->rx_ring.netbufs_ring);
}
static inline struct sk_buff *ath10k_htt_rx_netbuf_pop(struct ath10k_htt *htt)
{
struct ath10k *ar = htt->ar;
int idx;
struct sk_buff *msdu;
lockdep_assert_held(&htt->rx_ring.lock);
if (htt->rx_ring.fill_cnt == 0) {
ath10k_warn(ar, "tried to pop sk_buff from an empty rx ring\n");
return NULL;
}
idx = htt->rx_ring.sw_rd_idx.msdu_payld;
msdu = htt->rx_ring.netbufs_ring[idx];
htt->rx_ring.netbufs_ring[idx] = NULL;
ath10k_htt_reset_paddrs_ring(htt, idx);
idx++;
idx &= htt->rx_ring.size_mask;
htt->rx_ring.sw_rd_idx.msdu_payld = idx;
htt->rx_ring.fill_cnt--;
dma_unmap_single(htt->ar->dev,
ATH10K_SKB_RXCB(msdu)->paddr,
msdu->len + skb_tailroom(msdu),
DMA_FROM_DEVICE);
ath10k_dbg_dump(ar, ATH10K_DBG_HTT_DUMP, NULL, "htt rx netbuf pop: ",
msdu->data, msdu->len + skb_tailroom(msdu));
return msdu;
}
/* return: < 0 fatal error, 0 - non chained msdu, 1 chained msdu */
static int ath10k_htt_rx_amsdu_pop(struct ath10k_htt *htt,
struct sk_buff_head *amsdu)
{
struct ath10k *ar = htt->ar;
int msdu_len, msdu_chaining = 0;
struct sk_buff *msdu;
struct htt_rx_desc *rx_desc;
lockdep_assert_held(&htt->rx_ring.lock);
for (;;) {
int last_msdu, msdu_len_invalid, msdu_chained;
msdu = ath10k_htt_rx_netbuf_pop(htt);
if (!msdu) {
__skb_queue_purge(amsdu);
return -ENOENT;
}
__skb_queue_tail(amsdu, msdu);
rx_desc = (struct htt_rx_desc *)msdu->data;
/* FIXME: we must report msdu payload since this is what caller
* expects now
*/
skb_put(msdu, offsetof(struct htt_rx_desc, msdu_payload));
skb_pull(msdu, offsetof(struct htt_rx_desc, msdu_payload));
/*
* Sanity check - confirm the HW is finished filling in the
* rx data.
* If the HW and SW are working correctly, then it's guaranteed
* that the HW's MAC DMA is done before this point in the SW.
* To prevent the case that we handle a stale Rx descriptor,
* just assert for now until we have a way to recover.
*/
if (!(__le32_to_cpu(rx_desc->attention.flags)
& RX_ATTENTION_FLAGS_MSDU_DONE)) {
__skb_queue_purge(amsdu);
return -EIO;
}
msdu_len_invalid = !!(__le32_to_cpu(rx_desc->attention.flags)
& (RX_ATTENTION_FLAGS_MPDU_LENGTH_ERR |
RX_ATTENTION_FLAGS_MSDU_LENGTH_ERR));
msdu_len = MS(__le32_to_cpu(rx_desc->msdu_start.common.info0),
RX_MSDU_START_INFO0_MSDU_LENGTH);
msdu_chained = rx_desc->frag_info.ring2_more_count;
if (msdu_len_invalid)
msdu_len = 0;
skb_trim(msdu, 0);
skb_put(msdu, min(msdu_len, HTT_RX_MSDU_SIZE));
msdu_len -= msdu->len;
/* Note: Chained buffers do not contain rx descriptor */
while (msdu_chained--) {
msdu = ath10k_htt_rx_netbuf_pop(htt);
if (!msdu) {
__skb_queue_purge(amsdu);
return -ENOENT;
}
__skb_queue_tail(amsdu, msdu);
skb_trim(msdu, 0);
skb_put(msdu, min(msdu_len, HTT_RX_BUF_SIZE));
msdu_len -= msdu->len;
msdu_chaining = 1;
}
last_msdu = __le32_to_cpu(rx_desc->msdu_end.common.info0) &
RX_MSDU_END_INFO0_LAST_MSDU;
trace_ath10k_htt_rx_desc(ar, &rx_desc->attention,
sizeof(*rx_desc) - sizeof(u32));
if (last_msdu)
break;
}
if (skb_queue_empty(amsdu))
msdu_chaining = -1;
/*
* Don't refill the ring yet.
*
* First, the elements popped here are still in use - it is not
* safe to overwrite them until the matching call to
* mpdu_desc_list_next. Second, for efficiency it is preferable to
* refill the rx ring with 1 PPDU's worth of rx buffers (something
* like 32 x 3 buffers), rather than one MPDU's worth of rx buffers
* (something like 3 buffers). Consequently, we'll rely on the txrx
* SW to tell us when it is done pulling all the PPDU's rx buffers
* out of the rx ring, and then refill it just once.
*/
return msdu_chaining;
}
static struct sk_buff *ath10k_htt_rx_pop_paddr(struct ath10k_htt *htt,
u64 paddr)
{
struct ath10k *ar = htt->ar;
struct ath10k_skb_rxcb *rxcb;
struct sk_buff *msdu;
lockdep_assert_held(&htt->rx_ring.lock);
msdu = ath10k_htt_rx_find_skb_paddr(ar, paddr);
if (!msdu)
return NULL;
rxcb = ATH10K_SKB_RXCB(msdu);
hash_del(&rxcb->hlist);
htt->rx_ring.fill_cnt--;
dma_unmap_single(htt->ar->dev, rxcb->paddr,
msdu->len + skb_tailroom(msdu),
DMA_FROM_DEVICE);
ath10k_dbg_dump(ar, ATH10K_DBG_HTT_DUMP, NULL, "htt rx netbuf pop: ",
msdu->data, msdu->len + skb_tailroom(msdu));
return msdu;
}
static int ath10k_htt_rx_pop_paddr32_list(struct ath10k_htt *htt,
struct htt_rx_in_ord_ind *ev,
struct sk_buff_head *list)
{
struct ath10k *ar = htt->ar;
struct htt_rx_in_ord_msdu_desc *msdu_desc = ev->msdu_descs32;
struct htt_rx_desc *rxd;
struct sk_buff *msdu;
int msdu_count;
bool is_offload;
u32 paddr;
lockdep_assert_held(&htt->rx_ring.lock);
msdu_count = __le16_to_cpu(ev->msdu_count);
is_offload = !!(ev->info & HTT_RX_IN_ORD_IND_INFO_OFFLOAD_MASK);
while (msdu_count--) {
paddr = __le32_to_cpu(msdu_desc->msdu_paddr);
msdu = ath10k_htt_rx_pop_paddr(htt, paddr);
if (!msdu) {
__skb_queue_purge(list);
return -ENOENT;
}
__skb_queue_tail(list, msdu);
if (!is_offload) {
rxd = (void *)msdu->data;
trace_ath10k_htt_rx_desc(ar, rxd, sizeof(*rxd));
skb_put(msdu, sizeof(*rxd));
skb_pull(msdu, sizeof(*rxd));
skb_put(msdu, __le16_to_cpu(msdu_desc->msdu_len));
if (!(__le32_to_cpu(rxd->attention.flags) &
RX_ATTENTION_FLAGS_MSDU_DONE)) {
ath10k_warn(htt->ar, "tried to pop an incomplete frame, oops!\n");
return -EIO;
}
}
msdu_desc++;
}
return 0;
}
static int ath10k_htt_rx_pop_paddr64_list(struct ath10k_htt *htt,
struct htt_rx_in_ord_ind *ev,
struct sk_buff_head *list)
{
struct ath10k *ar = htt->ar;
struct htt_rx_in_ord_msdu_desc_ext *msdu_desc = ev->msdu_descs64;
struct htt_rx_desc *rxd;
struct sk_buff *msdu;
int msdu_count;
bool is_offload;
u64 paddr;
lockdep_assert_held(&htt->rx_ring.lock);
msdu_count = __le16_to_cpu(ev->msdu_count);
is_offload = !!(ev->info & HTT_RX_IN_ORD_IND_INFO_OFFLOAD_MASK);
while (msdu_count--) {
paddr = __le64_to_cpu(msdu_desc->msdu_paddr);
msdu = ath10k_htt_rx_pop_paddr(htt, paddr);
if (!msdu) {
__skb_queue_purge(list);
return -ENOENT;
}
__skb_queue_tail(list, msdu);
if (!is_offload) {
rxd = (void *)msdu->data;
trace_ath10k_htt_rx_desc(ar, rxd, sizeof(*rxd));
skb_put(msdu, sizeof(*rxd));
skb_pull(msdu, sizeof(*rxd));
skb_put(msdu, __le16_to_cpu(msdu_desc->msdu_len));
if (!(__le32_to_cpu(rxd->attention.flags) &
RX_ATTENTION_FLAGS_MSDU_DONE)) {
ath10k_warn(htt->ar, "tried to pop an incomplete frame, oops!\n");
return -EIO;
}
}
msdu_desc++;
}
return 0;
}
int ath10k_htt_rx_alloc(struct ath10k_htt *htt)
{
struct ath10k *ar = htt->ar;
dma_addr_t paddr;
void *vaddr, *vaddr_ring;
size_t size;
struct timer_list *timer = &htt->rx_ring.refill_retry_timer;
htt->rx_confused = false;
/* XXX: The fill level could be changed during runtime in response to
* the host processing latency. Is this really worth it?
*/
htt->rx_ring.size = HTT_RX_RING_SIZE;
htt->rx_ring.size_mask = htt->rx_ring.size - 1;
htt->rx_ring.fill_level = ar->hw_params.rx_ring_fill_level;
if (!is_power_of_2(htt->rx_ring.size)) {
ath10k_warn(ar, "htt rx ring size is not power of 2\n");
return -EINVAL;
}
htt->rx_ring.netbufs_ring =
treewide: kzalloc() -> kcalloc() The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 04:03:40 +07:00
kcalloc(htt->rx_ring.size, sizeof(struct sk_buff *),
GFP_KERNEL);
if (!htt->rx_ring.netbufs_ring)
goto err_netbuf;
size = ath10k_htt_get_rx_ring_size(htt);
vaddr_ring = dma_alloc_coherent(htt->ar->dev, size, &paddr, GFP_KERNEL);
if (!vaddr_ring)
goto err_dma_ring;
ath10k_htt_config_paddrs_ring(htt, vaddr_ring);
htt->rx_ring.base_paddr = paddr;
vaddr = dma_alloc_coherent(htt->ar->dev,
sizeof(*htt->rx_ring.alloc_idx.vaddr),
&paddr, GFP_KERNEL);
if (!vaddr)
goto err_dma_idx;
htt->rx_ring.alloc_idx.vaddr = vaddr;
htt->rx_ring.alloc_idx.paddr = paddr;
htt->rx_ring.sw_rd_idx.msdu_payld = htt->rx_ring.size_mask;
*htt->rx_ring.alloc_idx.vaddr = 0;
/* Initialize the Rx refill retry timer */
timer_setup(timer, ath10k_htt_rx_ring_refill_retry, 0);
spin_lock_init(&htt->rx_ring.lock);
htt->rx_ring.fill_cnt = 0;
htt->rx_ring.sw_rd_idx.msdu_payld = 0;
hash_init(htt->rx_ring.skb_table);
skb_queue_head_init(&htt->rx_msdus_q);
skb_queue_head_init(&htt->rx_in_ord_compl_q);
skb_queue_head_init(&htt->tx_fetch_ind_q);
atomic_set(&htt->num_mpdus_ready, 0);
ath10k_dbg(ar, ATH10K_DBG_BOOT, "htt rx ring size %d fill_level %d\n",
htt->rx_ring.size, htt->rx_ring.fill_level);
return 0;
err_dma_idx:
dma_free_coherent(htt->ar->dev,
ath10k_htt_get_rx_ring_size(htt),
vaddr_ring,
htt->rx_ring.base_paddr);
err_dma_ring:
kfree(htt->rx_ring.netbufs_ring);
err_netbuf:
return -ENOMEM;
}
static int ath10k_htt_rx_crypto_param_len(struct ath10k *ar,
enum htt_rx_mpdu_encrypt_type type)
{
switch (type) {
case HTT_RX_MPDU_ENCRYPT_NONE:
return 0;
case HTT_RX_MPDU_ENCRYPT_WEP40:
case HTT_RX_MPDU_ENCRYPT_WEP104:
return IEEE80211_WEP_IV_LEN;
case HTT_RX_MPDU_ENCRYPT_TKIP_WITHOUT_MIC:
case HTT_RX_MPDU_ENCRYPT_TKIP_WPA:
return IEEE80211_TKIP_IV_LEN;
case HTT_RX_MPDU_ENCRYPT_AES_CCM_WPA2:
return IEEE80211_CCMP_HDR_LEN;
case HTT_RX_MPDU_ENCRYPT_AES_CCM256_WPA2:
return IEEE80211_CCMP_256_HDR_LEN;
case HTT_RX_MPDU_ENCRYPT_AES_GCMP_WPA2:
case HTT_RX_MPDU_ENCRYPT_AES_GCMP256_WPA2:
return IEEE80211_GCMP_HDR_LEN;
case HTT_RX_MPDU_ENCRYPT_WEP128:
case HTT_RX_MPDU_ENCRYPT_WAPI:
break;
}
ath10k_warn(ar, "unsupported encryption type %d\n", type);
return 0;
}
#define MICHAEL_MIC_LEN 8
static int ath10k_htt_rx_crypto_mic_len(struct ath10k *ar,
enum htt_rx_mpdu_encrypt_type type)
{
switch (type) {
case HTT_RX_MPDU_ENCRYPT_NONE:
case HTT_RX_MPDU_ENCRYPT_WEP40:
case HTT_RX_MPDU_ENCRYPT_WEP104:
case HTT_RX_MPDU_ENCRYPT_TKIP_WITHOUT_MIC:
case HTT_RX_MPDU_ENCRYPT_TKIP_WPA:
return 0;
case HTT_RX_MPDU_ENCRYPT_AES_CCM_WPA2:
return IEEE80211_CCMP_MIC_LEN;
case HTT_RX_MPDU_ENCRYPT_AES_CCM256_WPA2:
return IEEE80211_CCMP_256_MIC_LEN;
case HTT_RX_MPDU_ENCRYPT_AES_GCMP_WPA2:
case HTT_RX_MPDU_ENCRYPT_AES_GCMP256_WPA2:
return IEEE80211_GCMP_MIC_LEN;
case HTT_RX_MPDU_ENCRYPT_WEP128:
case HTT_RX_MPDU_ENCRYPT_WAPI:
break;
}
ath10k_warn(ar, "unsupported encryption type %d\n", type);
return 0;
}
static int ath10k_htt_rx_crypto_icv_len(struct ath10k *ar,
enum htt_rx_mpdu_encrypt_type type)
{
switch (type) {
case HTT_RX_MPDU_ENCRYPT_NONE:
case HTT_RX_MPDU_ENCRYPT_AES_CCM_WPA2:
case HTT_RX_MPDU_ENCRYPT_AES_CCM256_WPA2:
case HTT_RX_MPDU_ENCRYPT_AES_GCMP_WPA2:
case HTT_RX_MPDU_ENCRYPT_AES_GCMP256_WPA2:
return 0;
case HTT_RX_MPDU_ENCRYPT_WEP40:
case HTT_RX_MPDU_ENCRYPT_WEP104:
return IEEE80211_WEP_ICV_LEN;
case HTT_RX_MPDU_ENCRYPT_TKIP_WITHOUT_MIC:
case HTT_RX_MPDU_ENCRYPT_TKIP_WPA:
return IEEE80211_TKIP_ICV_LEN;
case HTT_RX_MPDU_ENCRYPT_WEP128:
case HTT_RX_MPDU_ENCRYPT_WAPI:
break;
}
ath10k_warn(ar, "unsupported encryption type %d\n", type);
return 0;
}
struct amsdu_subframe_hdr {
u8 dst[ETH_ALEN];
u8 src[ETH_ALEN];
__be16 len;
} __packed;
#define GROUP_ID_IS_SU_MIMO(x) ((x) == 0 || (x) == 63)
static inline u8 ath10k_bw_to_mac80211_bw(u8 bw)
{
u8 ret = 0;
switch (bw) {
case 0:
ret = RATE_INFO_BW_20;
break;
case 1:
ret = RATE_INFO_BW_40;
break;
case 2:
ret = RATE_INFO_BW_80;
break;
case 3:
ret = RATE_INFO_BW_160;
break;
}
return ret;
}
static void ath10k_htt_rx_h_rates(struct ath10k *ar,
struct ieee80211_rx_status *status,
struct htt_rx_desc *rxd)
{
struct ieee80211_supported_band *sband;
u8 cck, rate, bw, sgi, mcs, nss;
u8 preamble = 0;
u8 group_id;
u32 info1, info2, info3;
info1 = __le32_to_cpu(rxd->ppdu_start.info1);
info2 = __le32_to_cpu(rxd->ppdu_start.info2);
info3 = __le32_to_cpu(rxd->ppdu_start.info3);
preamble = MS(info1, RX_PPDU_START_INFO1_PREAMBLE_TYPE);
switch (preamble) {
case HTT_RX_LEGACY:
/* To get legacy rate index band is required. Since band can't
* be undefined check if freq is non-zero.
*/
if (!status->freq)
return;
cck = info1 & RX_PPDU_START_INFO1_L_SIG_RATE_SELECT;
rate = MS(info1, RX_PPDU_START_INFO1_L_SIG_RATE);
rate &= ~RX_PPDU_START_RATE_FLAG;
sband = &ar->mac.sbands[status->band];
status->rate_idx = ath10k_mac_hw_rate_to_idx(sband, rate, cck);
break;
case HTT_RX_HT:
case HTT_RX_HT_WITH_TXBF:
/* HT-SIG - Table 20-11 in info2 and info3 */
mcs = info2 & 0x1F;
nss = mcs >> 3;
bw = (info2 >> 7) & 1;
sgi = (info3 >> 7) & 1;
status->rate_idx = mcs;
mac80211: separate encoding/bandwidth from flags We currently use a lot of flags that are mutually incompatible, separate this out into actual encoding and bandwidth enum values. Much of this again done with spatch, with manual post-editing, mostly to add the switch statements and get rid of the conversions. @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_80MHZ +status->bw = RATE_INFO_BW_80 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_40MHZ +status->bw = RATE_INFO_BW_40 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_20MHZ +status->bw = RATE_INFO_BW_20 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_160MHZ +status->bw = RATE_INFO_BW_160 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_5MHZ +status->bw = RATE_INFO_BW_5 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_10MHZ +status->bw = RATE_INFO_BW_10 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_VHT +status->encoding = RX_ENC_VHT @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_HT +status->encoding = RX_ENC_HT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_VHT +status.encoding = RX_ENC_VHT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_HT +status.encoding = RX_ENC_HT @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_HT) +(status->encoding == RX_ENC_HT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_VHT) +(status->encoding == RX_ENC_VHT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_5MHZ) +(status->bw == RATE_INFO_BW_5) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_10MHZ) +(status->bw == RATE_INFO_BW_10) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_40MHZ) +(status->bw == RATE_INFO_BW_40) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_80MHZ) +(status->bw == RATE_INFO_BW_80) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_160MHZ) +(status->bw == RATE_INFO_BW_160) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26 17:14:59 +07:00
status->encoding = RX_ENC_HT;
if (sgi)
mac80211: clean up rate encoding bits in RX status In preparation for adding support for HE rates, clean up the driver report encoding for rate/bandwidth reporting on RX frames. Much of this patch was done with the following spatch: @@ expression status; @@ -status->flag & (RX_FLAG_HT | RX_FLAG_VHT) +status->enc_flags & (RX_ENC_FLAG_HT | RX_ENC_FLAG_VHT) @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORTPRE +status->enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status->flag & RX_FLAG_SHORTPRE +status->enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT +status->enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status->flag & RX_FLAG_HT +status->enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_40MHZ +status->enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status->flag & RX_FLAG_40MHZ +status->enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORT_GI +status->enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status->flag & RX_FLAG_SHORT_GI +status->enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT_GF +status->enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status->flag & RX_FLAG_HT_GF +status->enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_VHT +status->enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status->flag & RX_FLAG_VHT +status->enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_STBC_MASK +status->enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status->flag & RX_FLAG_STBC_MASK +status->enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_LDPC +status->enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status->flag & RX_FLAG_LDPC +status->enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_10MHZ +status->enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status->flag & RX_FLAG_10MHZ +status->enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_5MHZ +status->enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status->flag & RX_FLAG_5MHZ +status->enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_80MHZ +status->enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_80MHZ +status->enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_160MHZ +status->enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_160MHZ +status->enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_BF +status->enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_BF +status->enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status->flag op STBC << RX_FLAG_STBC_SHIFT +status->enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORTPRE +status.enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status.flag & RX_FLAG_SHORTPRE +status.enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT +status.enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status.flag & RX_FLAG_HT +status.enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_40MHZ +status.enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status.flag & RX_FLAG_40MHZ +status.enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORT_GI +status.enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status.flag & RX_FLAG_SHORT_GI +status.enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT_GF +status.enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status.flag & RX_FLAG_HT_GF +status.enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_VHT +status.enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status.flag & RX_FLAG_VHT +status.enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_STBC_MASK +status.enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status.flag & RX_FLAG_STBC_MASK +status.enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_LDPC +status.enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status.flag & RX_FLAG_LDPC +status.enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_10MHZ +status.enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status.flag & RX_FLAG_10MHZ +status.enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_5MHZ +status.enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status.flag & RX_FLAG_5MHZ +status.enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_80MHZ +status.enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_80MHZ +status.enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_160MHZ +status.enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_160MHZ +status.enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_BF +status.enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_BF +status.enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status.flag op STBC << RX_FLAG_STBC_SHIFT +status.enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ @@ -RX_FLAG_STBC_SHIFT +RX_ENC_FLAG_STBC_SHIFT Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26 16:13:00 +07:00
status->enc_flags |= RX_ENC_FLAG_SHORT_GI;
if (bw)
mac80211: separate encoding/bandwidth from flags We currently use a lot of flags that are mutually incompatible, separate this out into actual encoding and bandwidth enum values. Much of this again done with spatch, with manual post-editing, mostly to add the switch statements and get rid of the conversions. @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_80MHZ +status->bw = RATE_INFO_BW_80 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_40MHZ +status->bw = RATE_INFO_BW_40 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_20MHZ +status->bw = RATE_INFO_BW_20 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_160MHZ +status->bw = RATE_INFO_BW_160 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_5MHZ +status->bw = RATE_INFO_BW_5 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_10MHZ +status->bw = RATE_INFO_BW_10 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_VHT +status->encoding = RX_ENC_VHT @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_HT +status->encoding = RX_ENC_HT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_VHT +status.encoding = RX_ENC_VHT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_HT +status.encoding = RX_ENC_HT @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_HT) +(status->encoding == RX_ENC_HT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_VHT) +(status->encoding == RX_ENC_VHT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_5MHZ) +(status->bw == RATE_INFO_BW_5) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_10MHZ) +(status->bw == RATE_INFO_BW_10) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_40MHZ) +(status->bw == RATE_INFO_BW_40) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_80MHZ) +(status->bw == RATE_INFO_BW_80) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_160MHZ) +(status->bw == RATE_INFO_BW_160) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26 17:14:59 +07:00
status->bw = RATE_INFO_BW_40;
break;
case HTT_RX_VHT:
case HTT_RX_VHT_WITH_TXBF:
/* VHT-SIG-A1 in info2, VHT-SIG-A2 in info3
* TODO check this
*/
bw = info2 & 3;
sgi = info3 & 1;
group_id = (info2 >> 4) & 0x3F;
if (GROUP_ID_IS_SU_MIMO(group_id)) {
mcs = (info3 >> 4) & 0x0F;
nss = ((info2 >> 10) & 0x07) + 1;
} else {
/* Hardware doesn't decode VHT-SIG-B into Rx descriptor
* so it's impossible to decode MCS. Also since
* firmware consumes Group Id Management frames host
* has no knowledge regarding group/user position
* mapping so it's impossible to pick the correct Nsts
* from VHT-SIG-A1.
*
* Bandwidth and SGI are valid so report the rateinfo
* on best-effort basis.
*/
mcs = 0;
nss = 1;
}
if (mcs > 0x09) {
ath10k_warn(ar, "invalid MCS received %u\n", mcs);
ath10k_warn(ar, "rxd %08x mpdu start %08x %08x msdu start %08x %08x ppdu start %08x %08x %08x %08x %08x\n",
__le32_to_cpu(rxd->attention.flags),
__le32_to_cpu(rxd->mpdu_start.info0),
__le32_to_cpu(rxd->mpdu_start.info1),
__le32_to_cpu(rxd->msdu_start.common.info0),
__le32_to_cpu(rxd->msdu_start.common.info1),
rxd->ppdu_start.info0,
__le32_to_cpu(rxd->ppdu_start.info1),
__le32_to_cpu(rxd->ppdu_start.info2),
__le32_to_cpu(rxd->ppdu_start.info3),
__le32_to_cpu(rxd->ppdu_start.info4));
ath10k_warn(ar, "msdu end %08x mpdu end %08x\n",
__le32_to_cpu(rxd->msdu_end.common.info0),
__le32_to_cpu(rxd->mpdu_end.info0));
ath10k_dbg_dump(ar, ATH10K_DBG_HTT_DUMP, NULL,
"rx desc msdu payload: ",
rxd->msdu_payload, 50);
}
status->rate_idx = mcs;
status->nss = nss;
if (sgi)
mac80211: clean up rate encoding bits in RX status In preparation for adding support for HE rates, clean up the driver report encoding for rate/bandwidth reporting on RX frames. Much of this patch was done with the following spatch: @@ expression status; @@ -status->flag & (RX_FLAG_HT | RX_FLAG_VHT) +status->enc_flags & (RX_ENC_FLAG_HT | RX_ENC_FLAG_VHT) @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORTPRE +status->enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status->flag & RX_FLAG_SHORTPRE +status->enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT +status->enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status->flag & RX_FLAG_HT +status->enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_40MHZ +status->enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status->flag & RX_FLAG_40MHZ +status->enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORT_GI +status->enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status->flag & RX_FLAG_SHORT_GI +status->enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT_GF +status->enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status->flag & RX_FLAG_HT_GF +status->enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_VHT +status->enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status->flag & RX_FLAG_VHT +status->enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_STBC_MASK +status->enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status->flag & RX_FLAG_STBC_MASK +status->enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_LDPC +status->enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status->flag & RX_FLAG_LDPC +status->enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_10MHZ +status->enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status->flag & RX_FLAG_10MHZ +status->enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_5MHZ +status->enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status->flag & RX_FLAG_5MHZ +status->enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_80MHZ +status->enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_80MHZ +status->enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_160MHZ +status->enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_160MHZ +status->enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_BF +status->enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_BF +status->enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status->flag op STBC << RX_FLAG_STBC_SHIFT +status->enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORTPRE +status.enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status.flag & RX_FLAG_SHORTPRE +status.enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT +status.enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status.flag & RX_FLAG_HT +status.enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_40MHZ +status.enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status.flag & RX_FLAG_40MHZ +status.enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORT_GI +status.enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status.flag & RX_FLAG_SHORT_GI +status.enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT_GF +status.enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status.flag & RX_FLAG_HT_GF +status.enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_VHT +status.enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status.flag & RX_FLAG_VHT +status.enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_STBC_MASK +status.enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status.flag & RX_FLAG_STBC_MASK +status.enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_LDPC +status.enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status.flag & RX_FLAG_LDPC +status.enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_10MHZ +status.enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status.flag & RX_FLAG_10MHZ +status.enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_5MHZ +status.enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status.flag & RX_FLAG_5MHZ +status.enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_80MHZ +status.enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_80MHZ +status.enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_160MHZ +status.enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_160MHZ +status.enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_BF +status.enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_BF +status.enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status.flag op STBC << RX_FLAG_STBC_SHIFT +status.enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ @@ -RX_FLAG_STBC_SHIFT +RX_ENC_FLAG_STBC_SHIFT Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26 16:13:00 +07:00
status->enc_flags |= RX_ENC_FLAG_SHORT_GI;
status->bw = ath10k_bw_to_mac80211_bw(bw);
mac80211: separate encoding/bandwidth from flags We currently use a lot of flags that are mutually incompatible, separate this out into actual encoding and bandwidth enum values. Much of this again done with spatch, with manual post-editing, mostly to add the switch statements and get rid of the conversions. @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_80MHZ +status->bw = RATE_INFO_BW_80 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_40MHZ +status->bw = RATE_INFO_BW_40 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_20MHZ +status->bw = RATE_INFO_BW_20 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_160MHZ +status->bw = RATE_INFO_BW_160 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_5MHZ +status->bw = RATE_INFO_BW_5 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_10MHZ +status->bw = RATE_INFO_BW_10 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_VHT +status->encoding = RX_ENC_VHT @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_HT +status->encoding = RX_ENC_HT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_VHT +status.encoding = RX_ENC_VHT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_HT +status.encoding = RX_ENC_HT @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_HT) +(status->encoding == RX_ENC_HT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_VHT) +(status->encoding == RX_ENC_VHT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_5MHZ) +(status->bw == RATE_INFO_BW_5) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_10MHZ) +(status->bw == RATE_INFO_BW_10) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_40MHZ) +(status->bw == RATE_INFO_BW_40) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_80MHZ) +(status->bw == RATE_INFO_BW_80) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_160MHZ) +(status->bw == RATE_INFO_BW_160) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26 17:14:59 +07:00
status->encoding = RX_ENC_VHT;
break;
default:
break;
}
}
static struct ieee80211_channel *
ath10k_htt_rx_h_peer_channel(struct ath10k *ar, struct htt_rx_desc *rxd)
{
struct ath10k_peer *peer;
struct ath10k_vif *arvif;
struct cfg80211_chan_def def;
u16 peer_id;
lockdep_assert_held(&ar->data_lock);
if (!rxd)
return NULL;
if (rxd->attention.flags &
__cpu_to_le32(RX_ATTENTION_FLAGS_PEER_IDX_INVALID))
return NULL;
if (!(rxd->msdu_end.common.info0 &
__cpu_to_le32(RX_MSDU_END_INFO0_FIRST_MSDU)))
return NULL;
peer_id = MS(__le32_to_cpu(rxd->mpdu_start.info0),
RX_MPDU_START_INFO0_PEER_IDX);
peer = ath10k_peer_find_by_id(ar, peer_id);
if (!peer)
return NULL;
arvif = ath10k_get_arvif(ar, peer->vdev_id);
if (WARN_ON_ONCE(!arvif))
return NULL;
ath10k: remove unneccessary WARN_ON_ONCE in rx during ACS The below warning message seems to hit occasionally with the following combination (IPQ4019 + ACS scan) where we receive packets as a self peer when hostapd does ACS when we bring up AP mode . ath10k has the below fall back mechanism to fetch current operating channel in rx (it will check for the next channel tracking variable if the current one is NULL) [scan channel] --> [rx channel] --> [peer channel] --> [vdev channel] --> [any vdev channel] --> [target oper channel] 'scan channel' and 'target operating channel' are directly fetched from firmware events. All the others should be updated by mac80211. During ACS scan we wouldn't have a valid channel context assigned from mac80211 ('ar->rx_channel'), and also relying on ('ar->scan_channel') is not helpful (it becomes NULL when it goes to BSS channel and also when the scan event is completed). In short we cannot always rely on these two channel tracking variables. 'Target Operating Channel' (ar->tgt_oper_chan) seems to keep track of the current operating even while we are doing ACS scan and etc. Hence remove this un-necessary warning message and continue with target_operating channel. At the worst case scenario when the target operating channel is invalid (NULL) we already have an ath10k warning message to notify we really don't have a proper channel configured in rx to update the rx status("no channel configured; ignoring frame(s)!") WARNING: CPU: 0 PID: 0 at ath/ath10k/htt_rx.c:803 [<c0318838>] (warn_slowpath_null) from [<bf4a0104>] (ath10k_htt_rx_h_channel+0xe0/0x1b8 [ath10k_core]) [<bf4a0104>] (ath10k_htt_rx_h_channel [ath10k_core]) from [<bf4a025c>] (ath10k_htt_rx_h_ppdu+0x80/0x288 [ath10k_core]) [<bf4a025c>] (ath10k_htt_rx_h_ppdu [ath10k_core]) from [<bf4a1a9c>] (ath10k_htt_txrx_compl_task+0x724/0x9d4 [ath10k_core]) [<bf4a1a9c>] (ath10k_htt_txrx_compl_task [ath10k_core]) Fixes:3b0499e9ce42 ("ath10k: reduce warning messages during rx without proper channel context") Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-06-29 23:29:24 +07:00
if (ath10k_mac_vif_chan(arvif->vif, &def))
return NULL;
return def.chan;
}
static struct ieee80211_channel *
ath10k_htt_rx_h_vdev_channel(struct ath10k *ar, u32 vdev_id)
{
struct ath10k_vif *arvif;
struct cfg80211_chan_def def;
lockdep_assert_held(&ar->data_lock);
list_for_each_entry(arvif, &ar->arvifs, list) {
if (arvif->vdev_id == vdev_id &&
ath10k_mac_vif_chan(arvif->vif, &def) == 0)
return def.chan;
}
return NULL;
}
static void
ath10k_htt_rx_h_any_chan_iter(struct ieee80211_hw *hw,
struct ieee80211_chanctx_conf *conf,
void *data)
{
struct cfg80211_chan_def *def = data;
*def = conf->def;
}
static struct ieee80211_channel *
ath10k_htt_rx_h_any_channel(struct ath10k *ar)
{
struct cfg80211_chan_def def = {};
ieee80211_iter_chan_contexts_atomic(ar->hw,
ath10k_htt_rx_h_any_chan_iter,
&def);
return def.chan;
}
static bool ath10k_htt_rx_h_channel(struct ath10k *ar,
struct ieee80211_rx_status *status,
struct htt_rx_desc *rxd,
u32 vdev_id)
{
struct ieee80211_channel *ch;
spin_lock_bh(&ar->data_lock);
ch = ar->scan_channel;
if (!ch)
ch = ar->rx_channel;
if (!ch)
ch = ath10k_htt_rx_h_peer_channel(ar, rxd);
if (!ch)
ch = ath10k_htt_rx_h_vdev_channel(ar, vdev_id);
if (!ch)
ch = ath10k_htt_rx_h_any_channel(ar);
if (!ch)
ch = ar->tgt_oper_chan;
spin_unlock_bh(&ar->data_lock);
if (!ch)
return false;
status->band = ch->band;
status->freq = ch->center_freq;
return true;
}
static void ath10k_htt_rx_h_signal(struct ath10k *ar,
struct ieee80211_rx_status *status,
struct htt_rx_desc *rxd)
{
int i;
for (i = 0; i < IEEE80211_MAX_CHAINS ; i++) {
status->chains &= ~BIT(i);
if (rxd->ppdu_start.rssi_chains[i].pri20_mhz != 0x80) {
status->chain_signal[i] = ATH10K_DEFAULT_NOISE_FLOOR +
rxd->ppdu_start.rssi_chains[i].pri20_mhz;
status->chains |= BIT(i);
}
}
/* FIXME: Get real NF */
status->signal = ATH10K_DEFAULT_NOISE_FLOOR +
rxd->ppdu_start.rssi_comb;
status->flag &= ~RX_FLAG_NO_SIGNAL_VAL;
}
static void ath10k_htt_rx_h_mactime(struct ath10k *ar,
struct ieee80211_rx_status *status,
struct htt_rx_desc *rxd)
{
/* FIXME: TSF is known only at the end of PPDU, in the last MPDU. This
* means all prior MSDUs in a PPDU are reported to mac80211 without the
* TSF. Is it worth holding frames until end of PPDU is known?
*
* FIXME: Can we get/compute 64bit TSF?
*/
status->mactime = __le32_to_cpu(rxd->ppdu_end.common.tsf_timestamp);
status->flag |= RX_FLAG_MACTIME_END;
}
static void ath10k_htt_rx_h_ppdu(struct ath10k *ar,
struct sk_buff_head *amsdu,
struct ieee80211_rx_status *status,
u32 vdev_id)
{
struct sk_buff *first;
struct htt_rx_desc *rxd;
bool is_first_ppdu;
bool is_last_ppdu;
if (skb_queue_empty(amsdu))
return;
first = skb_peek(amsdu);
rxd = (void *)first->data - sizeof(*rxd);
is_first_ppdu = !!(rxd->attention.flags &
__cpu_to_le32(RX_ATTENTION_FLAGS_FIRST_MPDU));
is_last_ppdu = !!(rxd->attention.flags &
__cpu_to_le32(RX_ATTENTION_FLAGS_LAST_MPDU));
if (is_first_ppdu) {
/* New PPDU starts so clear out the old per-PPDU status. */
status->freq = 0;
status->rate_idx = 0;
status->nss = 0;
mac80211: separate encoding/bandwidth from flags We currently use a lot of flags that are mutually incompatible, separate this out into actual encoding and bandwidth enum values. Much of this again done with spatch, with manual post-editing, mostly to add the switch statements and get rid of the conversions. @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_80MHZ +status->bw = RATE_INFO_BW_80 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_40MHZ +status->bw = RATE_INFO_BW_40 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_20MHZ +status->bw = RATE_INFO_BW_20 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_160MHZ +status->bw = RATE_INFO_BW_160 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_5MHZ +status->bw = RATE_INFO_BW_5 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_10MHZ +status->bw = RATE_INFO_BW_10 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_VHT +status->encoding = RX_ENC_VHT @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_HT +status->encoding = RX_ENC_HT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_VHT +status.encoding = RX_ENC_VHT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_HT +status.encoding = RX_ENC_HT @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_HT) +(status->encoding == RX_ENC_HT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_VHT) +(status->encoding == RX_ENC_VHT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_5MHZ) +(status->bw == RATE_INFO_BW_5) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_10MHZ) +(status->bw == RATE_INFO_BW_10) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_40MHZ) +(status->bw == RATE_INFO_BW_40) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_80MHZ) +(status->bw == RATE_INFO_BW_80) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_160MHZ) +(status->bw == RATE_INFO_BW_160) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26 17:14:59 +07:00
status->encoding = RX_ENC_LEGACY;
status->bw = RATE_INFO_BW_20;
mac80211: clean up rate encoding bits in RX status In preparation for adding support for HE rates, clean up the driver report encoding for rate/bandwidth reporting on RX frames. Much of this patch was done with the following spatch: @@ expression status; @@ -status->flag & (RX_FLAG_HT | RX_FLAG_VHT) +status->enc_flags & (RX_ENC_FLAG_HT | RX_ENC_FLAG_VHT) @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORTPRE +status->enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status->flag & RX_FLAG_SHORTPRE +status->enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT +status->enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status->flag & RX_FLAG_HT +status->enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_40MHZ +status->enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status->flag & RX_FLAG_40MHZ +status->enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORT_GI +status->enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status->flag & RX_FLAG_SHORT_GI +status->enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT_GF +status->enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status->flag & RX_FLAG_HT_GF +status->enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_VHT +status->enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status->flag & RX_FLAG_VHT +status->enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_STBC_MASK +status->enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status->flag & RX_FLAG_STBC_MASK +status->enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_LDPC +status->enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status->flag & RX_FLAG_LDPC +status->enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_10MHZ +status->enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status->flag & RX_FLAG_10MHZ +status->enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_5MHZ +status->enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status->flag & RX_FLAG_5MHZ +status->enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_80MHZ +status->enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_80MHZ +status->enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_160MHZ +status->enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_160MHZ +status->enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_BF +status->enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_BF +status->enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status->flag op STBC << RX_FLAG_STBC_SHIFT +status->enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORTPRE +status.enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status.flag & RX_FLAG_SHORTPRE +status.enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT +status.enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status.flag & RX_FLAG_HT +status.enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_40MHZ +status.enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status.flag & RX_FLAG_40MHZ +status.enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORT_GI +status.enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status.flag & RX_FLAG_SHORT_GI +status.enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT_GF +status.enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status.flag & RX_FLAG_HT_GF +status.enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_VHT +status.enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status.flag & RX_FLAG_VHT +status.enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_STBC_MASK +status.enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status.flag & RX_FLAG_STBC_MASK +status.enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_LDPC +status.enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status.flag & RX_FLAG_LDPC +status.enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_10MHZ +status.enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status.flag & RX_FLAG_10MHZ +status.enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_5MHZ +status.enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status.flag & RX_FLAG_5MHZ +status.enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_80MHZ +status.enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_80MHZ +status.enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_160MHZ +status.enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_160MHZ +status.enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_BF +status.enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_BF +status.enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status.flag op STBC << RX_FLAG_STBC_SHIFT +status.enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ @@ -RX_FLAG_STBC_SHIFT +RX_ENC_FLAG_STBC_SHIFT Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26 16:13:00 +07:00
status->flag &= ~RX_FLAG_MACTIME_END;
status->flag |= RX_FLAG_NO_SIGNAL_VAL;
status->flag &= ~(RX_FLAG_AMPDU_IS_LAST);
status->flag |= RX_FLAG_AMPDU_DETAILS | RX_FLAG_AMPDU_LAST_KNOWN;
status->ampdu_reference = ar->ampdu_reference;
ath10k_htt_rx_h_signal(ar, status, rxd);
ath10k_htt_rx_h_channel(ar, status, rxd, vdev_id);
ath10k_htt_rx_h_rates(ar, status, rxd);
}
if (is_last_ppdu) {
ath10k_htt_rx_h_mactime(ar, status, rxd);
/* set ampdu last segment flag */
status->flag |= RX_FLAG_AMPDU_IS_LAST;
ar->ampdu_reference++;
}
}
static const char * const tid_to_ac[] = {
"BE",
"BK",
"BK",
"BE",
"VI",
"VI",
"VO",
"VO",
};
static char *ath10k_get_tid(struct ieee80211_hdr *hdr, char *out, size_t size)
{
u8 *qc;
int tid;
if (!ieee80211_is_data_qos(hdr->frame_control))
return "";
qc = ieee80211_get_qos_ctl(hdr);
tid = *qc & IEEE80211_QOS_CTL_TID_MASK;
if (tid < 8)
snprintf(out, size, "tid %d (%s)", tid, tid_to_ac[tid]);
else
snprintf(out, size, "tid %d", tid);
return out;
}
static void ath10k_htt_rx_h_queue_msdu(struct ath10k *ar,
struct ieee80211_rx_status *rx_status,
struct sk_buff *skb)
{
struct ieee80211_rx_status *status;
status = IEEE80211_SKB_RXCB(skb);
*status = *rx_status;
__skb_queue_tail(&ar->htt.rx_msdus_q, skb);
}
static void ath10k_process_rx(struct ath10k *ar, struct sk_buff *skb)
{
struct ieee80211_rx_status *status;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
char tid[32];
status = IEEE80211_SKB_RXCB(skb);
ath10k_dbg(ar, ATH10K_DBG_DATA,
mac80211: clean up rate encoding bits in RX status In preparation for adding support for HE rates, clean up the driver report encoding for rate/bandwidth reporting on RX frames. Much of this patch was done with the following spatch: @@ expression status; @@ -status->flag & (RX_FLAG_HT | RX_FLAG_VHT) +status->enc_flags & (RX_ENC_FLAG_HT | RX_ENC_FLAG_VHT) @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORTPRE +status->enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status->flag & RX_FLAG_SHORTPRE +status->enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT +status->enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status->flag & RX_FLAG_HT +status->enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_40MHZ +status->enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status->flag & RX_FLAG_40MHZ +status->enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORT_GI +status->enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status->flag & RX_FLAG_SHORT_GI +status->enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT_GF +status->enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status->flag & RX_FLAG_HT_GF +status->enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_VHT +status->enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status->flag & RX_FLAG_VHT +status->enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_STBC_MASK +status->enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status->flag & RX_FLAG_STBC_MASK +status->enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_LDPC +status->enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status->flag & RX_FLAG_LDPC +status->enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_10MHZ +status->enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status->flag & RX_FLAG_10MHZ +status->enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_5MHZ +status->enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status->flag & RX_FLAG_5MHZ +status->enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_80MHZ +status->enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_80MHZ +status->enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_160MHZ +status->enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_160MHZ +status->enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_BF +status->enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_BF +status->enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status->flag op STBC << RX_FLAG_STBC_SHIFT +status->enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORTPRE +status.enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status.flag & RX_FLAG_SHORTPRE +status.enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT +status.enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status.flag & RX_FLAG_HT +status.enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_40MHZ +status.enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status.flag & RX_FLAG_40MHZ +status.enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORT_GI +status.enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status.flag & RX_FLAG_SHORT_GI +status.enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT_GF +status.enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status.flag & RX_FLAG_HT_GF +status.enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_VHT +status.enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status.flag & RX_FLAG_VHT +status.enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_STBC_MASK +status.enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status.flag & RX_FLAG_STBC_MASK +status.enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_LDPC +status.enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status.flag & RX_FLAG_LDPC +status.enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_10MHZ +status.enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status.flag & RX_FLAG_10MHZ +status.enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_5MHZ +status.enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status.flag & RX_FLAG_5MHZ +status.enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_80MHZ +status.enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_80MHZ +status.enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_160MHZ +status.enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_160MHZ +status.enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_BF +status.enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_BF +status.enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status.flag op STBC << RX_FLAG_STBC_SHIFT +status.enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ @@ -RX_FLAG_STBC_SHIFT +RX_ENC_FLAG_STBC_SHIFT Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26 16:13:00 +07:00
"rx skb %pK len %u peer %pM %s %s sn %u %s%s%s%s%s%s %srate_idx %u vht_nss %u freq %u band %u flag 0x%x fcs-err %i mic-err %i amsdu-more %i\n",
skb,
skb->len,
ieee80211_get_SA(hdr),
ath10k_get_tid(hdr, tid, sizeof(tid)),
is_multicast_ether_addr(ieee80211_get_DA(hdr)) ?
"mcast" : "ucast",
(__le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4,
mac80211: separate encoding/bandwidth from flags We currently use a lot of flags that are mutually incompatible, separate this out into actual encoding and bandwidth enum values. Much of this again done with spatch, with manual post-editing, mostly to add the switch statements and get rid of the conversions. @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_80MHZ +status->bw = RATE_INFO_BW_80 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_40MHZ +status->bw = RATE_INFO_BW_40 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_20MHZ +status->bw = RATE_INFO_BW_20 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_160MHZ +status->bw = RATE_INFO_BW_160 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_5MHZ +status->bw = RATE_INFO_BW_5 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_10MHZ +status->bw = RATE_INFO_BW_10 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_VHT +status->encoding = RX_ENC_VHT @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_HT +status->encoding = RX_ENC_HT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_VHT +status.encoding = RX_ENC_VHT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_HT +status.encoding = RX_ENC_HT @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_HT) +(status->encoding == RX_ENC_HT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_VHT) +(status->encoding == RX_ENC_VHT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_5MHZ) +(status->bw == RATE_INFO_BW_5) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_10MHZ) +(status->bw == RATE_INFO_BW_10) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_40MHZ) +(status->bw == RATE_INFO_BW_40) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_80MHZ) +(status->bw == RATE_INFO_BW_80) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_160MHZ) +(status->bw == RATE_INFO_BW_160) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26 17:14:59 +07:00
(status->encoding == RX_ENC_LEGACY) ? "legacy" : "",
(status->encoding == RX_ENC_HT) ? "ht" : "",
(status->encoding == RX_ENC_VHT) ? "vht" : "",
(status->bw == RATE_INFO_BW_40) ? "40" : "",
(status->bw == RATE_INFO_BW_80) ? "80" : "",
(status->bw == RATE_INFO_BW_160) ? "160" : "",
mac80211: clean up rate encoding bits in RX status In preparation for adding support for HE rates, clean up the driver report encoding for rate/bandwidth reporting on RX frames. Much of this patch was done with the following spatch: @@ expression status; @@ -status->flag & (RX_FLAG_HT | RX_FLAG_VHT) +status->enc_flags & (RX_ENC_FLAG_HT | RX_ENC_FLAG_VHT) @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORTPRE +status->enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status->flag & RX_FLAG_SHORTPRE +status->enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT +status->enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status->flag & RX_FLAG_HT +status->enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_40MHZ +status->enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status->flag & RX_FLAG_40MHZ +status->enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORT_GI +status->enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status->flag & RX_FLAG_SHORT_GI +status->enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT_GF +status->enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status->flag & RX_FLAG_HT_GF +status->enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_VHT +status->enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status->flag & RX_FLAG_VHT +status->enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_STBC_MASK +status->enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status->flag & RX_FLAG_STBC_MASK +status->enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_LDPC +status->enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status->flag & RX_FLAG_LDPC +status->enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_10MHZ +status->enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status->flag & RX_FLAG_10MHZ +status->enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_5MHZ +status->enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status->flag & RX_FLAG_5MHZ +status->enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_80MHZ +status->enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_80MHZ +status->enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_160MHZ +status->enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_160MHZ +status->enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_BF +status->enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_BF +status->enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status->flag op STBC << RX_FLAG_STBC_SHIFT +status->enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORTPRE +status.enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status.flag & RX_FLAG_SHORTPRE +status.enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT +status.enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status.flag & RX_FLAG_HT +status.enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_40MHZ +status.enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status.flag & RX_FLAG_40MHZ +status.enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORT_GI +status.enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status.flag & RX_FLAG_SHORT_GI +status.enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT_GF +status.enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status.flag & RX_FLAG_HT_GF +status.enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_VHT +status.enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status.flag & RX_FLAG_VHT +status.enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_STBC_MASK +status.enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status.flag & RX_FLAG_STBC_MASK +status.enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_LDPC +status.enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status.flag & RX_FLAG_LDPC +status.enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_10MHZ +status.enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status.flag & RX_FLAG_10MHZ +status.enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_5MHZ +status.enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status.flag & RX_FLAG_5MHZ +status.enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_80MHZ +status.enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_80MHZ +status.enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_160MHZ +status.enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_160MHZ +status.enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_BF +status.enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_BF +status.enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status.flag op STBC << RX_FLAG_STBC_SHIFT +status.enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ @@ -RX_FLAG_STBC_SHIFT +RX_ENC_FLAG_STBC_SHIFT Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26 16:13:00 +07:00
status->enc_flags & RX_ENC_FLAG_SHORT_GI ? "sgi " : "",
status->rate_idx,
status->nss,
status->freq,
status->band, status->flag,
!!(status->flag & RX_FLAG_FAILED_FCS_CRC),
!!(status->flag & RX_FLAG_MMIC_ERROR),
!!(status->flag & RX_FLAG_AMSDU_MORE));
ath10k_dbg_dump(ar, ATH10K_DBG_HTT_DUMP, NULL, "rx skb: ",
skb->data, skb->len);
trace_ath10k_rx_hdr(ar, skb->data, skb->len);
trace_ath10k_rx_payload(ar, skb->data, skb->len);
ieee80211_rx_napi(ar->hw, NULL, skb, &ar->napi);
}
static int ath10k_htt_rx_nwifi_hdrlen(struct ath10k *ar,
struct ieee80211_hdr *hdr)
{
int len = ieee80211_hdrlen(hdr->frame_control);
if (!test_bit(ATH10K_FW_FEATURE_NO_NWIFI_DECAP_4ADDR_PADDING,
ar->running_fw->fw_file.fw_features))
len = round_up(len, 4);
return len;
}
static void ath10k_htt_rx_h_undecap_raw(struct ath10k *ar,
struct sk_buff *msdu,
struct ieee80211_rx_status *status,
enum htt_rx_mpdu_encrypt_type enctype,
bool is_decrypted)
{
struct ieee80211_hdr *hdr;
struct htt_rx_desc *rxd;
size_t hdr_len;
size_t crypto_len;
bool is_first;
bool is_last;
rxd = (void *)msdu->data - sizeof(*rxd);
is_first = !!(rxd->msdu_end.common.info0 &
__cpu_to_le32(RX_MSDU_END_INFO0_FIRST_MSDU));
is_last = !!(rxd->msdu_end.common.info0 &
__cpu_to_le32(RX_MSDU_END_INFO0_LAST_MSDU));
/* Delivered decapped frame:
* [802.11 header]
* [crypto param] <-- can be trimmed if !fcs_err &&
* !decrypt_err && !peer_idx_invalid
* [amsdu header] <-- only if A-MSDU
* [rfc1042/llc]
* [payload]
* [FCS] <-- at end, needs to be trimmed
*/
/* This probably shouldn't happen but warn just in case */
if (unlikely(WARN_ON_ONCE(!is_first)))
return;
/* This probably shouldn't happen but warn just in case */
if (unlikely(WARN_ON_ONCE(!(is_first && is_last))))
return;
skb_trim(msdu, msdu->len - FCS_LEN);
/* In most cases this will be true for sniffed frames. It makes sense
ath10k: enable raw encap mode and software crypto engine This patch enables raw Rx/Tx encap mode to support software based crypto engine. This patch introduces a new module param 'cryptmode'. cryptmode: 0: Use hardware crypto engine globally with native Wi-Fi mode TX/RX encapsulation to the firmware. This is the default mode. 1: Use sofware crypto engine globally with raw mode TX/RX encapsulation to the firmware. Known limitation: A-MSDU must be disabled for RAW Tx encap mode to perform well when heavy traffic is applied. Testing: (by Michal Kazior <michal.kazior@tieto.com>) a) Performance Testing cryptmode=1 ap=qca988x sta=killer1525 killer1525 -> qca988x 194.496 mbps [tcp1 ip4] killer1525 -> qca988x 238.309 mbps [tcp5 ip4] killer1525 -> qca988x 266.958 mbps [udp1 ip4] killer1525 -> qca988x 477.468 mbps [udp5 ip4] qca988x -> killer1525 301.378 mbps [tcp1 ip4] qca988x -> killer1525 297.949 mbps [tcp5 ip4] qca988x -> killer1525 331.351 mbps [udp1 ip4] qca988x -> killer1525 371.528 mbps [udp5 ip4] ap=killer1525 sta=qca988x qca988x -> killer1525 331.447 mbps [tcp1 ip4] qca988x -> killer1525 328.783 mbps [tcp5 ip4] qca988x -> killer1525 375.309 mbps [udp1 ip4] qca988x -> killer1525 403.379 mbps [udp5 ip4] killer1525 -> qca988x 203.689 mbps [tcp1 ip4] killer1525 -> qca988x 222.339 mbps [tcp5 ip4] killer1525 -> qca988x 264.199 mbps [udp1 ip4] killer1525 -> qca988x 479.371 mbps [udp5 ip4] Note: - only open network tested for RAW vs nwifi performance comparison - killer1525 (qca6174 hw2.2) is 2x2 device (hence max 866mbps) - used iperf - OTA, devices a few cm apart from each other, no shielding - tcpX/udpX, X - means number of threads used Overview: - relative Tx performance drop is seen but is within reasonable and expected threshold (A-MSDU must be disabled with RAW Tx) b) Connectivity Testing cryptmode=1 ap=iwl6205 sta1=qca988x crypto=open topology-1ap1sta OK ap=iwl6205 sta1=qca988x crypto=wep1 topology-1ap1sta OK ap=iwl6205 sta1=qca988x crypto=wpa topology-1ap1sta OK ap=iwl6205 sta1=qca988x crypto=wpa-ccmp topology-1ap1sta OK ap=qca988x sta1=iwl6205 crypto=open topology-1ap1sta OK ap=qca988x sta1=iwl6205 crypto=wep1 topology-1ap1sta OK ap=qca988x sta1=iwl6205 crypto=wpa topology-1ap1sta OK ap=qca988x sta1=iwl6205 crypto=wpa-ccmp topology-1ap1sta OK ap=iwl6205 sta1=qca988x crypto=open topology-1ap1sta2br OK ap=iwl6205 sta1=qca988x crypto=wep1 topology-1ap1sta2br OK ap=iwl6205 sta1=qca988x crypto=wpa topology-1ap1sta2br OK ap=iwl6205 sta1=qca988x crypto=wpa-ccmp topology-1ap1sta2br OK ap=qca988x sta1=iwl6205 crypto=open topology-1ap1sta2br OK ap=qca988x sta1=iwl6205 crypto=wep1 topology-1ap1sta2br OK ap=qca988x sta1=iwl6205 crypto=wpa topology-1ap1sta2br OK ap=qca988x sta1=iwl6205 crypto=wpa-ccmp topology-1ap1sta2br OK ap=iwl6205 sta1=qca988x crypto=open topology-1ap1sta2br1vlan OK ap=iwl6205 sta1=qca988x crypto=wep1 topology-1ap1sta2br1vlan OK ap=iwl6205 sta1=qca988x crypto=wpa topology-1ap1sta2br1vlan OK ap=iwl6205 sta1=qca988x crypto=wpa-ccmp topology-1ap1sta2br1vlan OK ap=qca988x sta1=iwl6205 crypto=open topology-1ap1sta2br1vlan OK ap=qca988x sta1=iwl6205 crypto=wep1 topology-1ap1sta2br1vlan OK ap=qca988x sta1=iwl6205 crypto=wpa topology-1ap1sta2br1vlan OK ap=qca988x sta1=iwl6205 crypto=wpa-ccmp topology-1ap1sta2br1vlan OK Note: - each test takes all possible endpoint pairs and pings - each pair-ping flushes arp table - ip6 is used c) Testbed Topology: 1ap1sta: [ap] ---- [sta] endpoints: ap, sta 1ap1sta2br: [veth0] [ap] ---- [sta] [veth2] | | | | [veth1] | \ [veth3] \ / \ / [br0] [br1] endpoints: veth0, veth2, br0, br1 note: STA works in 4addr mode, AP has wds_sta=1 1ap1sta2br1vlan: [veth0] [ap] ---- [sta] [veth2] | | | | [veth1] | \ [veth3] \ / \ / [br0] [br1] | | [vlan0_id2] [vlan1_id2] endpoints: vlan0_id2, vlan1_id2 note: STA works in 4addr mode, AP has wds_sta=1 Credits: Thanks to Michal Kazior <michal.kazior@tieto.com> who helped find the amsdu issue, contributed a workaround (already squashed into this patch), and contributed the throughput and connectivity tests results. Signed-off-by: David Liu <cfliu.tw@gmail.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Tested-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-25 00:25:32 +07:00
* to deliver them as-is without stripping the crypto param. This is
* necessary for software based decryption.
*
* If there's no error then the frame is decrypted. At least that is
* the case for frames that come in via fragmented rx indication.
*/
if (!is_decrypted)
return;
/* The payload is decrypted so strip crypto params. Start from tail
* since hdr is used to compute some stuff.
*/
hdr = (void *)msdu->data;
/* Tail */
if (status->flag & RX_FLAG_IV_STRIPPED) {
skb_trim(msdu, msdu->len -
ath10k_htt_rx_crypto_mic_len(ar, enctype));
skb_trim(msdu, msdu->len -
ath10k_htt_rx_crypto_icv_len(ar, enctype));
} else {
/* MIC */
if (status->flag & RX_FLAG_MIC_STRIPPED)
skb_trim(msdu, msdu->len -
ath10k_htt_rx_crypto_mic_len(ar, enctype));
/* ICV */
if (status->flag & RX_FLAG_ICV_STRIPPED)
skb_trim(msdu, msdu->len -
ath10k_htt_rx_crypto_icv_len(ar, enctype));
}
/* MMIC */
if ((status->flag & RX_FLAG_MMIC_STRIPPED) &&
!ieee80211_has_morefrags(hdr->frame_control) &&
enctype == HTT_RX_MPDU_ENCRYPT_TKIP_WPA)
skb_trim(msdu, msdu->len - MICHAEL_MIC_LEN);
/* Head */
if (status->flag & RX_FLAG_IV_STRIPPED) {
hdr_len = ieee80211_hdrlen(hdr->frame_control);
crypto_len = ath10k_htt_rx_crypto_param_len(ar, enctype);
memmove((void *)msdu->data + crypto_len,
(void *)msdu->data, hdr_len);
skb_pull(msdu, crypto_len);
}
}
static void ath10k_htt_rx_h_undecap_nwifi(struct ath10k *ar,
struct sk_buff *msdu,
struct ieee80211_rx_status *status,
const u8 first_hdr[64],
enum htt_rx_mpdu_encrypt_type enctype)
{
struct ieee80211_hdr *hdr;
struct htt_rx_desc *rxd;
size_t hdr_len;
u8 da[ETH_ALEN];
u8 sa[ETH_ALEN];
int l3_pad_bytes;
int bytes_aligned = ar->hw_params.decap_align_bytes;
/* Delivered decapped frame:
* [nwifi 802.11 header] <-- replaced with 802.11 hdr
* [rfc1042/llc]
*
* Note: The nwifi header doesn't have QoS Control and is
* (always?) a 3addr frame.
*
* Note2: There's no A-MSDU subframe header. Even if it's part
* of an A-MSDU.
*/
/* pull decapped header and copy SA & DA */
rxd = (void *)msdu->data - sizeof(*rxd);
l3_pad_bytes = ath10k_rx_desc_get_l3_pad_bytes(&ar->hw_params, rxd);
skb_put(msdu, l3_pad_bytes);
hdr = (struct ieee80211_hdr *)(msdu->data + l3_pad_bytes);
hdr_len = ath10k_htt_rx_nwifi_hdrlen(ar, hdr);
ether_addr_copy(da, ieee80211_get_DA(hdr));
ether_addr_copy(sa, ieee80211_get_SA(hdr));
skb_pull(msdu, hdr_len);
/* push original 802.11 header */
hdr = (struct ieee80211_hdr *)first_hdr;
hdr_len = ieee80211_hdrlen(hdr->frame_control);
if (!(status->flag & RX_FLAG_IV_STRIPPED)) {
memcpy(skb_push(msdu,
ath10k_htt_rx_crypto_param_len(ar, enctype)),
(void *)hdr + round_up(hdr_len, bytes_aligned),
ath10k_htt_rx_crypto_param_len(ar, enctype));
}
memcpy(skb_push(msdu, hdr_len), hdr, hdr_len);
/* original 802.11 header has a different DA and in
* case of 4addr it may also have different SA
*/
hdr = (struct ieee80211_hdr *)msdu->data;
ether_addr_copy(ieee80211_get_DA(hdr), da);
ether_addr_copy(ieee80211_get_SA(hdr), sa);
}
static void *ath10k_htt_rx_h_find_rfc1042(struct ath10k *ar,
struct sk_buff *msdu,
enum htt_rx_mpdu_encrypt_type enctype)
{
struct ieee80211_hdr *hdr;
struct htt_rx_desc *rxd;
size_t hdr_len, crypto_len;
void *rfc1042;
bool is_first, is_last, is_amsdu;
int bytes_aligned = ar->hw_params.decap_align_bytes;
rxd = (void *)msdu->data - sizeof(*rxd);
hdr = (void *)rxd->rx_hdr_status;
is_first = !!(rxd->msdu_end.common.info0 &
__cpu_to_le32(RX_MSDU_END_INFO0_FIRST_MSDU));
is_last = !!(rxd->msdu_end.common.info0 &
__cpu_to_le32(RX_MSDU_END_INFO0_LAST_MSDU));
is_amsdu = !(is_first && is_last);
rfc1042 = hdr;
if (is_first) {
hdr_len = ieee80211_hdrlen(hdr->frame_control);
crypto_len = ath10k_htt_rx_crypto_param_len(ar, enctype);
rfc1042 += round_up(hdr_len, bytes_aligned) +
round_up(crypto_len, bytes_aligned);
}
if (is_amsdu)
rfc1042 += sizeof(struct amsdu_subframe_hdr);
return rfc1042;
}
static void ath10k_htt_rx_h_undecap_eth(struct ath10k *ar,
struct sk_buff *msdu,
struct ieee80211_rx_status *status,
const u8 first_hdr[64],
enum htt_rx_mpdu_encrypt_type enctype)
{
struct ieee80211_hdr *hdr;
struct ethhdr *eth;
size_t hdr_len;
void *rfc1042;
u8 da[ETH_ALEN];
u8 sa[ETH_ALEN];
int l3_pad_bytes;
struct htt_rx_desc *rxd;
int bytes_aligned = ar->hw_params.decap_align_bytes;
/* Delivered decapped frame:
* [eth header] <-- replaced with 802.11 hdr & rfc1042/llc
* [payload]
*/
rfc1042 = ath10k_htt_rx_h_find_rfc1042(ar, msdu, enctype);
if (WARN_ON_ONCE(!rfc1042))
return;
rxd = (void *)msdu->data - sizeof(*rxd);
l3_pad_bytes = ath10k_rx_desc_get_l3_pad_bytes(&ar->hw_params, rxd);
skb_put(msdu, l3_pad_bytes);
skb_pull(msdu, l3_pad_bytes);
/* pull decapped header and copy SA & DA */
eth = (struct ethhdr *)msdu->data;
ether_addr_copy(da, eth->h_dest);
ether_addr_copy(sa, eth->h_source);
skb_pull(msdu, sizeof(struct ethhdr));
/* push rfc1042/llc/snap */
memcpy(skb_push(msdu, sizeof(struct rfc1042_hdr)), rfc1042,
sizeof(struct rfc1042_hdr));
/* push original 802.11 header */
hdr = (struct ieee80211_hdr *)first_hdr;
hdr_len = ieee80211_hdrlen(hdr->frame_control);
if (!(status->flag & RX_FLAG_IV_STRIPPED)) {
memcpy(skb_push(msdu,
ath10k_htt_rx_crypto_param_len(ar, enctype)),
(void *)hdr + round_up(hdr_len, bytes_aligned),
ath10k_htt_rx_crypto_param_len(ar, enctype));
}
memcpy(skb_push(msdu, hdr_len), hdr, hdr_len);
/* original 802.11 header has a different DA and in
* case of 4addr it may also have different SA
*/
hdr = (struct ieee80211_hdr *)msdu->data;
ether_addr_copy(ieee80211_get_DA(hdr), da);
ether_addr_copy(ieee80211_get_SA(hdr), sa);
}
static void ath10k_htt_rx_h_undecap_snap(struct ath10k *ar,
struct sk_buff *msdu,
struct ieee80211_rx_status *status,
const u8 first_hdr[64],
enum htt_rx_mpdu_encrypt_type enctype)
{
struct ieee80211_hdr *hdr;
size_t hdr_len;
int l3_pad_bytes;
struct htt_rx_desc *rxd;
int bytes_aligned = ar->hw_params.decap_align_bytes;
/* Delivered decapped frame:
* [amsdu header] <-- replaced with 802.11 hdr
* [rfc1042/llc]
* [payload]
*/
rxd = (void *)msdu->data - sizeof(*rxd);
l3_pad_bytes = ath10k_rx_desc_get_l3_pad_bytes(&ar->hw_params, rxd);
skb_put(msdu, l3_pad_bytes);
skb_pull(msdu, sizeof(struct amsdu_subframe_hdr) + l3_pad_bytes);
hdr = (struct ieee80211_hdr *)first_hdr;
hdr_len = ieee80211_hdrlen(hdr->frame_control);
if (!(status->flag & RX_FLAG_IV_STRIPPED)) {
memcpy(skb_push(msdu,
ath10k_htt_rx_crypto_param_len(ar, enctype)),
(void *)hdr + round_up(hdr_len, bytes_aligned),
ath10k_htt_rx_crypto_param_len(ar, enctype));
}
memcpy(skb_push(msdu, hdr_len), hdr, hdr_len);
}
static void ath10k_htt_rx_h_undecap(struct ath10k *ar,
struct sk_buff *msdu,
struct ieee80211_rx_status *status,
u8 first_hdr[64],
enum htt_rx_mpdu_encrypt_type enctype,
bool is_decrypted)
{
struct htt_rx_desc *rxd;
enum rx_msdu_decap_format decap;
/* First msdu's decapped header:
* [802.11 header] <-- padded to 4 bytes long
* [crypto param] <-- padded to 4 bytes long
* [amsdu header] <-- only if A-MSDU
* [rfc1042/llc]
*
* Other (2nd, 3rd, ..) msdu's decapped header:
* [amsdu header] <-- only if A-MSDU
* [rfc1042/llc]
*/
rxd = (void *)msdu->data - sizeof(*rxd);
decap = MS(__le32_to_cpu(rxd->msdu_start.common.info1),
RX_MSDU_START_INFO1_DECAP_FORMAT);
switch (decap) {
case RX_MSDU_DECAP_RAW:
ath10k_htt_rx_h_undecap_raw(ar, msdu, status, enctype,
is_decrypted);
break;
case RX_MSDU_DECAP_NATIVE_WIFI:
ath10k_htt_rx_h_undecap_nwifi(ar, msdu, status, first_hdr,
enctype);
break;
case RX_MSDU_DECAP_ETHERNET2_DIX:
ath10k_htt_rx_h_undecap_eth(ar, msdu, status, first_hdr, enctype);
break;
case RX_MSDU_DECAP_8023_SNAP_LLC:
ath10k_htt_rx_h_undecap_snap(ar, msdu, status, first_hdr,
enctype);
break;
}
}
static int ath10k_htt_rx_get_csum_state(struct sk_buff *skb)
{
struct htt_rx_desc *rxd;
u32 flags, info;
bool is_ip4, is_ip6;
bool is_tcp, is_udp;
bool ip_csum_ok, tcpudp_csum_ok;
rxd = (void *)skb->data - sizeof(*rxd);
flags = __le32_to_cpu(rxd->attention.flags);
info = __le32_to_cpu(rxd->msdu_start.common.info1);
is_ip4 = !!(info & RX_MSDU_START_INFO1_IPV4_PROTO);
is_ip6 = !!(info & RX_MSDU_START_INFO1_IPV6_PROTO);
is_tcp = !!(info & RX_MSDU_START_INFO1_TCP_PROTO);
is_udp = !!(info & RX_MSDU_START_INFO1_UDP_PROTO);
ip_csum_ok = !(flags & RX_ATTENTION_FLAGS_IP_CHKSUM_FAIL);
tcpudp_csum_ok = !(flags & RX_ATTENTION_FLAGS_TCP_UDP_CHKSUM_FAIL);
if (!is_ip4 && !is_ip6)
return CHECKSUM_NONE;
if (!is_tcp && !is_udp)
return CHECKSUM_NONE;
if (!ip_csum_ok)
return CHECKSUM_NONE;
if (!tcpudp_csum_ok)
return CHECKSUM_NONE;
return CHECKSUM_UNNECESSARY;
}
static void ath10k_htt_rx_h_csum_offload(struct sk_buff *msdu)
{
msdu->ip_summed = ath10k_htt_rx_get_csum_state(msdu);
}
static void ath10k_htt_rx_h_mpdu(struct ath10k *ar,
struct sk_buff_head *amsdu,
struct ieee80211_rx_status *status,
ath10k: add sta rx packet stats per tid Added per tid sta counters for the following - Total number MSDUs received from firmware - Number of MSDUs received with errors like decryption, crc, mic ,etc. - Number of MSDUs dropped in the driver - A-MPDU/A-MSDU subframe stats - Number of MSDUS passed to mac80211 All stats other than A-MPDU stats are only for received data frames. A-MPDU stats might have stats for management frames when monitor interface is active where management frames are notified both in wmi and HTT interfaces. These per tid stats can be enabled with tid bitmask through a debugfs like below echo <tid_bitmask> > /sys/kernel/debug/ieee80211/phyX/ath10k/sta_tid_stats_mask tid 16 (tid_bitmask 0x10000) is used for non-qos data/management frames The stats are read from /sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/<sta_mac>/dump_tid_stats Sample output: To enable rx stats for tid 0, 5 and 6, echo 0x00000061 > /sys/kernel/debug/ieee80211/phy0/ath10k/sta_tid_stats_mask cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan15/stations/8c\:fd\:f0\:0a\:8e\:df/dump_tid_stats Driver Rx pkt stats per tid, ([tid] count) ------------------------------------------ MSDUs from FW [00] 2567 [05] 3178 [06] 1089 MSDUs unchained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:chained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:filtered [00] 0 [05] 0 [06] 0 MSDUs queued for mac80211 [00] 2567 [05] 3178 [06] 1089 MSDUs with error:fcs_err [00] 0 [05] 0 [06] 2 MSDUs with error:tkip_err [00] 0 [05] 0 [06] 0 MSDUs with error:crypt_err [00] 0 [05] 0 [06] 0 MSDUs with error:peer_idx_inval [00] 0 [05] 0 [06] 0 A-MPDU num subframes upto 10 [00] 2567 [05] 3178 [06] 1087 A-MPDU num subframes 11-20 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 21-30 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 31-40 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 41-50 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 51-60 [00] 0 [05] 0 [06] 0 A-MPDU num subframes >60 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 1 [00] 2567 [05] 3178 [06] 1089 A-MSDU num subframes 2 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 3 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 4 [00] 0 [05] 0 [06] 0 A-MSDU num subframes >4 [00] 0 [05] 0 [06] 0 Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-14 17:14:06 +07:00
bool fill_crypt_header,
u8 *rx_hdr,
enum ath10k_pkt_rx_err *err)
{
struct sk_buff *first;
struct sk_buff *last;
struct sk_buff *msdu;
struct htt_rx_desc *rxd;
struct ieee80211_hdr *hdr;
enum htt_rx_mpdu_encrypt_type enctype;
u8 first_hdr[64];
u8 *qos;
bool has_fcs_err;
bool has_crypto_err;
bool has_tkip_err;
bool has_peer_idx_invalid;
bool is_decrypted;
bool is_mgmt;
u32 attention;
if (skb_queue_empty(amsdu))
return;
first = skb_peek(amsdu);
rxd = (void *)first->data - sizeof(*rxd);
is_mgmt = !!(rxd->attention.flags &
__cpu_to_le32(RX_ATTENTION_FLAGS_MGMT_TYPE));
enctype = MS(__le32_to_cpu(rxd->mpdu_start.info0),
RX_MPDU_START_INFO0_ENCRYPT_TYPE);
/* First MSDU's Rx descriptor in an A-MSDU contains full 802.11
* decapped header. It'll be used for undecapping of each MSDU.
*/
hdr = (void *)rxd->rx_hdr_status;
memcpy(first_hdr, hdr, RX_HTT_HDR_STATUS_LEN);
ath10k: add sta rx packet stats per tid Added per tid sta counters for the following - Total number MSDUs received from firmware - Number of MSDUs received with errors like decryption, crc, mic ,etc. - Number of MSDUs dropped in the driver - A-MPDU/A-MSDU subframe stats - Number of MSDUS passed to mac80211 All stats other than A-MPDU stats are only for received data frames. A-MPDU stats might have stats for management frames when monitor interface is active where management frames are notified both in wmi and HTT interfaces. These per tid stats can be enabled with tid bitmask through a debugfs like below echo <tid_bitmask> > /sys/kernel/debug/ieee80211/phyX/ath10k/sta_tid_stats_mask tid 16 (tid_bitmask 0x10000) is used for non-qos data/management frames The stats are read from /sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/<sta_mac>/dump_tid_stats Sample output: To enable rx stats for tid 0, 5 and 6, echo 0x00000061 > /sys/kernel/debug/ieee80211/phy0/ath10k/sta_tid_stats_mask cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan15/stations/8c\:fd\:f0\:0a\:8e\:df/dump_tid_stats Driver Rx pkt stats per tid, ([tid] count) ------------------------------------------ MSDUs from FW [00] 2567 [05] 3178 [06] 1089 MSDUs unchained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:chained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:filtered [00] 0 [05] 0 [06] 0 MSDUs queued for mac80211 [00] 2567 [05] 3178 [06] 1089 MSDUs with error:fcs_err [00] 0 [05] 0 [06] 2 MSDUs with error:tkip_err [00] 0 [05] 0 [06] 0 MSDUs with error:crypt_err [00] 0 [05] 0 [06] 0 MSDUs with error:peer_idx_inval [00] 0 [05] 0 [06] 0 A-MPDU num subframes upto 10 [00] 2567 [05] 3178 [06] 1087 A-MPDU num subframes 11-20 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 21-30 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 31-40 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 41-50 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 51-60 [00] 0 [05] 0 [06] 0 A-MPDU num subframes >60 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 1 [00] 2567 [05] 3178 [06] 1089 A-MSDU num subframes 2 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 3 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 4 [00] 0 [05] 0 [06] 0 A-MSDU num subframes >4 [00] 0 [05] 0 [06] 0 Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-14 17:14:06 +07:00
if (rx_hdr)
memcpy(rx_hdr, hdr, RX_HTT_HDR_STATUS_LEN);
/* Each A-MSDU subframe will use the original header as the base and be
* reported as a separate MSDU so strip the A-MSDU bit from QoS Ctl.
*/
hdr = (void *)first_hdr;
if (ieee80211_is_data_qos(hdr->frame_control)) {
qos = ieee80211_get_qos_ctl(hdr);
qos[0] &= ~IEEE80211_QOS_CTL_A_MSDU_PRESENT;
}
/* Some attention flags are valid only in the last MSDU. */
last = skb_peek_tail(amsdu);
rxd = (void *)last->data - sizeof(*rxd);
attention = __le32_to_cpu(rxd->attention.flags);
has_fcs_err = !!(attention & RX_ATTENTION_FLAGS_FCS_ERR);
has_crypto_err = !!(attention & RX_ATTENTION_FLAGS_DECRYPT_ERR);
has_tkip_err = !!(attention & RX_ATTENTION_FLAGS_TKIP_MIC_ERR);
has_peer_idx_invalid = !!(attention & RX_ATTENTION_FLAGS_PEER_IDX_INVALID);
/* Note: If hardware captures an encrypted frame that it can't decrypt,
* e.g. due to fcs error, missing peer or invalid key data it will
* report the frame as raw.
*/
is_decrypted = (enctype != HTT_RX_MPDU_ENCRYPT_NONE &&
!has_fcs_err &&
!has_crypto_err &&
!has_peer_idx_invalid);
/* Clear per-MPDU flags while leaving per-PPDU flags intact. */
status->flag &= ~(RX_FLAG_FAILED_FCS_CRC |
RX_FLAG_MMIC_ERROR |
RX_FLAG_DECRYPTED |
RX_FLAG_IV_STRIPPED |
RX_FLAG_ONLY_MONITOR |
RX_FLAG_MMIC_STRIPPED);
if (has_fcs_err)
status->flag |= RX_FLAG_FAILED_FCS_CRC;
if (has_tkip_err)
status->flag |= RX_FLAG_MMIC_ERROR;
ath10k: add sta rx packet stats per tid Added per tid sta counters for the following - Total number MSDUs received from firmware - Number of MSDUs received with errors like decryption, crc, mic ,etc. - Number of MSDUs dropped in the driver - A-MPDU/A-MSDU subframe stats - Number of MSDUS passed to mac80211 All stats other than A-MPDU stats are only for received data frames. A-MPDU stats might have stats for management frames when monitor interface is active where management frames are notified both in wmi and HTT interfaces. These per tid stats can be enabled with tid bitmask through a debugfs like below echo <tid_bitmask> > /sys/kernel/debug/ieee80211/phyX/ath10k/sta_tid_stats_mask tid 16 (tid_bitmask 0x10000) is used for non-qos data/management frames The stats are read from /sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/<sta_mac>/dump_tid_stats Sample output: To enable rx stats for tid 0, 5 and 6, echo 0x00000061 > /sys/kernel/debug/ieee80211/phy0/ath10k/sta_tid_stats_mask cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan15/stations/8c\:fd\:f0\:0a\:8e\:df/dump_tid_stats Driver Rx pkt stats per tid, ([tid] count) ------------------------------------------ MSDUs from FW [00] 2567 [05] 3178 [06] 1089 MSDUs unchained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:chained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:filtered [00] 0 [05] 0 [06] 0 MSDUs queued for mac80211 [00] 2567 [05] 3178 [06] 1089 MSDUs with error:fcs_err [00] 0 [05] 0 [06] 2 MSDUs with error:tkip_err [00] 0 [05] 0 [06] 0 MSDUs with error:crypt_err [00] 0 [05] 0 [06] 0 MSDUs with error:peer_idx_inval [00] 0 [05] 0 [06] 0 A-MPDU num subframes upto 10 [00] 2567 [05] 3178 [06] 1087 A-MPDU num subframes 11-20 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 21-30 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 31-40 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 41-50 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 51-60 [00] 0 [05] 0 [06] 0 A-MPDU num subframes >60 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 1 [00] 2567 [05] 3178 [06] 1089 A-MSDU num subframes 2 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 3 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 4 [00] 0 [05] 0 [06] 0 A-MSDU num subframes >4 [00] 0 [05] 0 [06] 0 Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-14 17:14:06 +07:00
if (err) {
if (has_fcs_err)
*err = ATH10K_PKT_RX_ERR_FCS;
else if (has_tkip_err)
*err = ATH10K_PKT_RX_ERR_TKIP;
else if (has_crypto_err)
*err = ATH10K_PKT_RX_ERR_CRYPT;
else if (has_peer_idx_invalid)
*err = ATH10K_PKT_RX_ERR_PEER_IDX_INVAL;
}
/* Firmware reports all necessary management frames via WMI already.
* They are not reported to monitor interfaces at all so pass the ones
* coming via HTT to monitor interfaces instead. This simplifies
* matters a lot.
*/
if (is_mgmt)
status->flag |= RX_FLAG_ONLY_MONITOR;
if (is_decrypted) {
status->flag |= RX_FLAG_DECRYPTED;
if (likely(!is_mgmt))
status->flag |= RX_FLAG_MMIC_STRIPPED;
if (fill_crypt_header)
status->flag |= RX_FLAG_MIC_STRIPPED |
RX_FLAG_ICV_STRIPPED;
else
status->flag |= RX_FLAG_IV_STRIPPED;
}
skb_queue_walk(amsdu, msdu) {
ath10k_htt_rx_h_csum_offload(msdu);
ath10k_htt_rx_h_undecap(ar, msdu, status, first_hdr, enctype,
is_decrypted);
/* Undecapping involves copying the original 802.11 header back
* to sk_buff. If frame is protected and hardware has decrypted
* it then remove the protected bit.
*/
if (!is_decrypted)
continue;
if (is_mgmt)
continue;
if (fill_crypt_header)
continue;
hdr = (void *)msdu->data;
hdr->frame_control &= ~__cpu_to_le16(IEEE80211_FCTL_PROTECTED);
}
}
static void ath10k_htt_rx_h_enqueue(struct ath10k *ar,
struct sk_buff_head *amsdu,
struct ieee80211_rx_status *status)
{
struct sk_buff *msdu;
struct sk_buff *first_subframe;
first_subframe = skb_peek(amsdu);
while ((msdu = __skb_dequeue(amsdu))) {
/* Setup per-MSDU flags */
if (skb_queue_empty(amsdu))
status->flag &= ~RX_FLAG_AMSDU_MORE;
else
status->flag |= RX_FLAG_AMSDU_MORE;
if (msdu == first_subframe) {
first_subframe = NULL;
status->flag &= ~RX_FLAG_ALLOW_SAME_PN;
} else {
status->flag |= RX_FLAG_ALLOW_SAME_PN;
}
ath10k_htt_rx_h_queue_msdu(ar, status, msdu);
}
}
ath10k: add sta rx packet stats per tid Added per tid sta counters for the following - Total number MSDUs received from firmware - Number of MSDUs received with errors like decryption, crc, mic ,etc. - Number of MSDUs dropped in the driver - A-MPDU/A-MSDU subframe stats - Number of MSDUS passed to mac80211 All stats other than A-MPDU stats are only for received data frames. A-MPDU stats might have stats for management frames when monitor interface is active where management frames are notified both in wmi and HTT interfaces. These per tid stats can be enabled with tid bitmask through a debugfs like below echo <tid_bitmask> > /sys/kernel/debug/ieee80211/phyX/ath10k/sta_tid_stats_mask tid 16 (tid_bitmask 0x10000) is used for non-qos data/management frames The stats are read from /sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/<sta_mac>/dump_tid_stats Sample output: To enable rx stats for tid 0, 5 and 6, echo 0x00000061 > /sys/kernel/debug/ieee80211/phy0/ath10k/sta_tid_stats_mask cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan15/stations/8c\:fd\:f0\:0a\:8e\:df/dump_tid_stats Driver Rx pkt stats per tid, ([tid] count) ------------------------------------------ MSDUs from FW [00] 2567 [05] 3178 [06] 1089 MSDUs unchained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:chained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:filtered [00] 0 [05] 0 [06] 0 MSDUs queued for mac80211 [00] 2567 [05] 3178 [06] 1089 MSDUs with error:fcs_err [00] 0 [05] 0 [06] 2 MSDUs with error:tkip_err [00] 0 [05] 0 [06] 0 MSDUs with error:crypt_err [00] 0 [05] 0 [06] 0 MSDUs with error:peer_idx_inval [00] 0 [05] 0 [06] 0 A-MPDU num subframes upto 10 [00] 2567 [05] 3178 [06] 1087 A-MPDU num subframes 11-20 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 21-30 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 31-40 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 41-50 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 51-60 [00] 0 [05] 0 [06] 0 A-MPDU num subframes >60 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 1 [00] 2567 [05] 3178 [06] 1089 A-MSDU num subframes 2 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 3 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 4 [00] 0 [05] 0 [06] 0 A-MSDU num subframes >4 [00] 0 [05] 0 [06] 0 Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-14 17:14:06 +07:00
static int ath10k_unchain_msdu(struct sk_buff_head *amsdu,
unsigned long int *unchain_cnt)
{
struct sk_buff *skb, *first;
int space;
int total_len = 0;
ath10k: add sta rx packet stats per tid Added per tid sta counters for the following - Total number MSDUs received from firmware - Number of MSDUs received with errors like decryption, crc, mic ,etc. - Number of MSDUs dropped in the driver - A-MPDU/A-MSDU subframe stats - Number of MSDUS passed to mac80211 All stats other than A-MPDU stats are only for received data frames. A-MPDU stats might have stats for management frames when monitor interface is active where management frames are notified both in wmi and HTT interfaces. These per tid stats can be enabled with tid bitmask through a debugfs like below echo <tid_bitmask> > /sys/kernel/debug/ieee80211/phyX/ath10k/sta_tid_stats_mask tid 16 (tid_bitmask 0x10000) is used for non-qos data/management frames The stats are read from /sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/<sta_mac>/dump_tid_stats Sample output: To enable rx stats for tid 0, 5 and 6, echo 0x00000061 > /sys/kernel/debug/ieee80211/phy0/ath10k/sta_tid_stats_mask cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan15/stations/8c\:fd\:f0\:0a\:8e\:df/dump_tid_stats Driver Rx pkt stats per tid, ([tid] count) ------------------------------------------ MSDUs from FW [00] 2567 [05] 3178 [06] 1089 MSDUs unchained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:chained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:filtered [00] 0 [05] 0 [06] 0 MSDUs queued for mac80211 [00] 2567 [05] 3178 [06] 1089 MSDUs with error:fcs_err [00] 0 [05] 0 [06] 2 MSDUs with error:tkip_err [00] 0 [05] 0 [06] 0 MSDUs with error:crypt_err [00] 0 [05] 0 [06] 0 MSDUs with error:peer_idx_inval [00] 0 [05] 0 [06] 0 A-MPDU num subframes upto 10 [00] 2567 [05] 3178 [06] 1087 A-MPDU num subframes 11-20 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 21-30 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 31-40 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 41-50 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 51-60 [00] 0 [05] 0 [06] 0 A-MPDU num subframes >60 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 1 [00] 2567 [05] 3178 [06] 1089 A-MSDU num subframes 2 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 3 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 4 [00] 0 [05] 0 [06] 0 A-MSDU num subframes >4 [00] 0 [05] 0 [06] 0 Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-14 17:14:06 +07:00
int amsdu_len = skb_queue_len(amsdu);
/* TODO: Might could optimize this by using
* skb_try_coalesce or similar method to
* decrease copying, or maybe get mac80211 to
* provide a way to just receive a list of
* skb?
*/
first = __skb_dequeue(amsdu);
/* Allocate total length all at once. */
skb_queue_walk(amsdu, skb)
total_len += skb->len;
space = total_len - skb_tailroom(first);
if ((space > 0) &&
(pskb_expand_head(first, 0, space, GFP_ATOMIC) < 0)) {
/* TODO: bump some rx-oom error stat */
/* put it back together so we can free the
* whole list at once.
*/
__skb_queue_head(amsdu, first);
return -1;
}
/* Walk list again, copying contents into
* msdu_head
*/
while ((skb = __skb_dequeue(amsdu))) {
skb_copy_from_linear_data(skb, skb_put(first, skb->len),
skb->len);
dev_kfree_skb_any(skb);
}
__skb_queue_head(amsdu, first);
ath10k: add sta rx packet stats per tid Added per tid sta counters for the following - Total number MSDUs received from firmware - Number of MSDUs received with errors like decryption, crc, mic ,etc. - Number of MSDUs dropped in the driver - A-MPDU/A-MSDU subframe stats - Number of MSDUS passed to mac80211 All stats other than A-MPDU stats are only for received data frames. A-MPDU stats might have stats for management frames when monitor interface is active where management frames are notified both in wmi and HTT interfaces. These per tid stats can be enabled with tid bitmask through a debugfs like below echo <tid_bitmask> > /sys/kernel/debug/ieee80211/phyX/ath10k/sta_tid_stats_mask tid 16 (tid_bitmask 0x10000) is used for non-qos data/management frames The stats are read from /sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/<sta_mac>/dump_tid_stats Sample output: To enable rx stats for tid 0, 5 and 6, echo 0x00000061 > /sys/kernel/debug/ieee80211/phy0/ath10k/sta_tid_stats_mask cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan15/stations/8c\:fd\:f0\:0a\:8e\:df/dump_tid_stats Driver Rx pkt stats per tid, ([tid] count) ------------------------------------------ MSDUs from FW [00] 2567 [05] 3178 [06] 1089 MSDUs unchained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:chained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:filtered [00] 0 [05] 0 [06] 0 MSDUs queued for mac80211 [00] 2567 [05] 3178 [06] 1089 MSDUs with error:fcs_err [00] 0 [05] 0 [06] 2 MSDUs with error:tkip_err [00] 0 [05] 0 [06] 0 MSDUs with error:crypt_err [00] 0 [05] 0 [06] 0 MSDUs with error:peer_idx_inval [00] 0 [05] 0 [06] 0 A-MPDU num subframes upto 10 [00] 2567 [05] 3178 [06] 1087 A-MPDU num subframes 11-20 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 21-30 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 31-40 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 41-50 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 51-60 [00] 0 [05] 0 [06] 0 A-MPDU num subframes >60 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 1 [00] 2567 [05] 3178 [06] 1089 A-MSDU num subframes 2 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 3 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 4 [00] 0 [05] 0 [06] 0 A-MSDU num subframes >4 [00] 0 [05] 0 [06] 0 Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-14 17:14:06 +07:00
*unchain_cnt += amsdu_len - 1;
return 0;
}
static void ath10k_htt_rx_h_unchain(struct ath10k *ar,
ath10k: add sta rx packet stats per tid Added per tid sta counters for the following - Total number MSDUs received from firmware - Number of MSDUs received with errors like decryption, crc, mic ,etc. - Number of MSDUs dropped in the driver - A-MPDU/A-MSDU subframe stats - Number of MSDUS passed to mac80211 All stats other than A-MPDU stats are only for received data frames. A-MPDU stats might have stats for management frames when monitor interface is active where management frames are notified both in wmi and HTT interfaces. These per tid stats can be enabled with tid bitmask through a debugfs like below echo <tid_bitmask> > /sys/kernel/debug/ieee80211/phyX/ath10k/sta_tid_stats_mask tid 16 (tid_bitmask 0x10000) is used for non-qos data/management frames The stats are read from /sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/<sta_mac>/dump_tid_stats Sample output: To enable rx stats for tid 0, 5 and 6, echo 0x00000061 > /sys/kernel/debug/ieee80211/phy0/ath10k/sta_tid_stats_mask cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan15/stations/8c\:fd\:f0\:0a\:8e\:df/dump_tid_stats Driver Rx pkt stats per tid, ([tid] count) ------------------------------------------ MSDUs from FW [00] 2567 [05] 3178 [06] 1089 MSDUs unchained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:chained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:filtered [00] 0 [05] 0 [06] 0 MSDUs queued for mac80211 [00] 2567 [05] 3178 [06] 1089 MSDUs with error:fcs_err [00] 0 [05] 0 [06] 2 MSDUs with error:tkip_err [00] 0 [05] 0 [06] 0 MSDUs with error:crypt_err [00] 0 [05] 0 [06] 0 MSDUs with error:peer_idx_inval [00] 0 [05] 0 [06] 0 A-MPDU num subframes upto 10 [00] 2567 [05] 3178 [06] 1087 A-MPDU num subframes 11-20 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 21-30 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 31-40 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 41-50 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 51-60 [00] 0 [05] 0 [06] 0 A-MPDU num subframes >60 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 1 [00] 2567 [05] 3178 [06] 1089 A-MSDU num subframes 2 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 3 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 4 [00] 0 [05] 0 [06] 0 A-MSDU num subframes >4 [00] 0 [05] 0 [06] 0 Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-14 17:14:06 +07:00
struct sk_buff_head *amsdu,
unsigned long int *drop_cnt,
unsigned long int *unchain_cnt)
{
struct sk_buff *first;
struct htt_rx_desc *rxd;
enum rx_msdu_decap_format decap;
first = skb_peek(amsdu);
rxd = (void *)first->data - sizeof(*rxd);
decap = MS(__le32_to_cpu(rxd->msdu_start.common.info1),
RX_MSDU_START_INFO1_DECAP_FORMAT);
/* FIXME: Current unchaining logic can only handle simple case of raw
* msdu chaining. If decapping is other than raw the chaining may be
* more complex and this isn't handled by the current code. Don't even
* try re-constructing such frames - it'll be pretty much garbage.
*/
if (decap != RX_MSDU_DECAP_RAW ||
skb_queue_len(amsdu) != 1 + rxd->frag_info.ring2_more_count) {
ath10k: add sta rx packet stats per tid Added per tid sta counters for the following - Total number MSDUs received from firmware - Number of MSDUs received with errors like decryption, crc, mic ,etc. - Number of MSDUs dropped in the driver - A-MPDU/A-MSDU subframe stats - Number of MSDUS passed to mac80211 All stats other than A-MPDU stats are only for received data frames. A-MPDU stats might have stats for management frames when monitor interface is active where management frames are notified both in wmi and HTT interfaces. These per tid stats can be enabled with tid bitmask through a debugfs like below echo <tid_bitmask> > /sys/kernel/debug/ieee80211/phyX/ath10k/sta_tid_stats_mask tid 16 (tid_bitmask 0x10000) is used for non-qos data/management frames The stats are read from /sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/<sta_mac>/dump_tid_stats Sample output: To enable rx stats for tid 0, 5 and 6, echo 0x00000061 > /sys/kernel/debug/ieee80211/phy0/ath10k/sta_tid_stats_mask cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan15/stations/8c\:fd\:f0\:0a\:8e\:df/dump_tid_stats Driver Rx pkt stats per tid, ([tid] count) ------------------------------------------ MSDUs from FW [00] 2567 [05] 3178 [06] 1089 MSDUs unchained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:chained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:filtered [00] 0 [05] 0 [06] 0 MSDUs queued for mac80211 [00] 2567 [05] 3178 [06] 1089 MSDUs with error:fcs_err [00] 0 [05] 0 [06] 2 MSDUs with error:tkip_err [00] 0 [05] 0 [06] 0 MSDUs with error:crypt_err [00] 0 [05] 0 [06] 0 MSDUs with error:peer_idx_inval [00] 0 [05] 0 [06] 0 A-MPDU num subframes upto 10 [00] 2567 [05] 3178 [06] 1087 A-MPDU num subframes 11-20 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 21-30 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 31-40 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 41-50 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 51-60 [00] 0 [05] 0 [06] 0 A-MPDU num subframes >60 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 1 [00] 2567 [05] 3178 [06] 1089 A-MSDU num subframes 2 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 3 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 4 [00] 0 [05] 0 [06] 0 A-MSDU num subframes >4 [00] 0 [05] 0 [06] 0 Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-14 17:14:06 +07:00
*drop_cnt += skb_queue_len(amsdu);
__skb_queue_purge(amsdu);
return;
}
ath10k: add sta rx packet stats per tid Added per tid sta counters for the following - Total number MSDUs received from firmware - Number of MSDUs received with errors like decryption, crc, mic ,etc. - Number of MSDUs dropped in the driver - A-MPDU/A-MSDU subframe stats - Number of MSDUS passed to mac80211 All stats other than A-MPDU stats are only for received data frames. A-MPDU stats might have stats for management frames when monitor interface is active where management frames are notified both in wmi and HTT interfaces. These per tid stats can be enabled with tid bitmask through a debugfs like below echo <tid_bitmask> > /sys/kernel/debug/ieee80211/phyX/ath10k/sta_tid_stats_mask tid 16 (tid_bitmask 0x10000) is used for non-qos data/management frames The stats are read from /sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/<sta_mac>/dump_tid_stats Sample output: To enable rx stats for tid 0, 5 and 6, echo 0x00000061 > /sys/kernel/debug/ieee80211/phy0/ath10k/sta_tid_stats_mask cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan15/stations/8c\:fd\:f0\:0a\:8e\:df/dump_tid_stats Driver Rx pkt stats per tid, ([tid] count) ------------------------------------------ MSDUs from FW [00] 2567 [05] 3178 [06] 1089 MSDUs unchained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:chained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:filtered [00] 0 [05] 0 [06] 0 MSDUs queued for mac80211 [00] 2567 [05] 3178 [06] 1089 MSDUs with error:fcs_err [00] 0 [05] 0 [06] 2 MSDUs with error:tkip_err [00] 0 [05] 0 [06] 0 MSDUs with error:crypt_err [00] 0 [05] 0 [06] 0 MSDUs with error:peer_idx_inval [00] 0 [05] 0 [06] 0 A-MPDU num subframes upto 10 [00] 2567 [05] 3178 [06] 1087 A-MPDU num subframes 11-20 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 21-30 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 31-40 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 41-50 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 51-60 [00] 0 [05] 0 [06] 0 A-MPDU num subframes >60 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 1 [00] 2567 [05] 3178 [06] 1089 A-MSDU num subframes 2 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 3 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 4 [00] 0 [05] 0 [06] 0 A-MSDU num subframes >4 [00] 0 [05] 0 [06] 0 Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-14 17:14:06 +07:00
ath10k_unchain_msdu(amsdu, unchain_cnt);
}
static bool ath10k_htt_rx_amsdu_allowed(struct ath10k *ar,
struct sk_buff_head *amsdu,
struct ieee80211_rx_status *rx_status)
{
/* FIXME: It might be a good idea to do some fuzzy-testing to drop
* invalid/dangerous frames.
*/
if (!rx_status->freq) {
ath10k_dbg(ar, ATH10K_DBG_HTT, "no channel configured; ignoring frame(s)!\n");
return false;
}
if (test_bit(ATH10K_CAC_RUNNING, &ar->dev_flags)) {
ath10k_dbg(ar, ATH10K_DBG_HTT, "htt rx cac running\n");
return false;
}
return true;
}
static void ath10k_htt_rx_h_filter(struct ath10k *ar,
struct sk_buff_head *amsdu,
ath10k: add sta rx packet stats per tid Added per tid sta counters for the following - Total number MSDUs received from firmware - Number of MSDUs received with errors like decryption, crc, mic ,etc. - Number of MSDUs dropped in the driver - A-MPDU/A-MSDU subframe stats - Number of MSDUS passed to mac80211 All stats other than A-MPDU stats are only for received data frames. A-MPDU stats might have stats for management frames when monitor interface is active where management frames are notified both in wmi and HTT interfaces. These per tid stats can be enabled with tid bitmask through a debugfs like below echo <tid_bitmask> > /sys/kernel/debug/ieee80211/phyX/ath10k/sta_tid_stats_mask tid 16 (tid_bitmask 0x10000) is used for non-qos data/management frames The stats are read from /sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/<sta_mac>/dump_tid_stats Sample output: To enable rx stats for tid 0, 5 and 6, echo 0x00000061 > /sys/kernel/debug/ieee80211/phy0/ath10k/sta_tid_stats_mask cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan15/stations/8c\:fd\:f0\:0a\:8e\:df/dump_tid_stats Driver Rx pkt stats per tid, ([tid] count) ------------------------------------------ MSDUs from FW [00] 2567 [05] 3178 [06] 1089 MSDUs unchained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:chained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:filtered [00] 0 [05] 0 [06] 0 MSDUs queued for mac80211 [00] 2567 [05] 3178 [06] 1089 MSDUs with error:fcs_err [00] 0 [05] 0 [06] 2 MSDUs with error:tkip_err [00] 0 [05] 0 [06] 0 MSDUs with error:crypt_err [00] 0 [05] 0 [06] 0 MSDUs with error:peer_idx_inval [00] 0 [05] 0 [06] 0 A-MPDU num subframes upto 10 [00] 2567 [05] 3178 [06] 1087 A-MPDU num subframes 11-20 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 21-30 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 31-40 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 41-50 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 51-60 [00] 0 [05] 0 [06] 0 A-MPDU num subframes >60 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 1 [00] 2567 [05] 3178 [06] 1089 A-MSDU num subframes 2 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 3 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 4 [00] 0 [05] 0 [06] 0 A-MSDU num subframes >4 [00] 0 [05] 0 [06] 0 Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-14 17:14:06 +07:00
struct ieee80211_rx_status *rx_status,
unsigned long int *drop_cnt)
{
if (skb_queue_empty(amsdu))
return;
if (ath10k_htt_rx_amsdu_allowed(ar, amsdu, rx_status))
return;
ath10k: add sta rx packet stats per tid Added per tid sta counters for the following - Total number MSDUs received from firmware - Number of MSDUs received with errors like decryption, crc, mic ,etc. - Number of MSDUs dropped in the driver - A-MPDU/A-MSDU subframe stats - Number of MSDUS passed to mac80211 All stats other than A-MPDU stats are only for received data frames. A-MPDU stats might have stats for management frames when monitor interface is active where management frames are notified both in wmi and HTT interfaces. These per tid stats can be enabled with tid bitmask through a debugfs like below echo <tid_bitmask> > /sys/kernel/debug/ieee80211/phyX/ath10k/sta_tid_stats_mask tid 16 (tid_bitmask 0x10000) is used for non-qos data/management frames The stats are read from /sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/<sta_mac>/dump_tid_stats Sample output: To enable rx stats for tid 0, 5 and 6, echo 0x00000061 > /sys/kernel/debug/ieee80211/phy0/ath10k/sta_tid_stats_mask cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan15/stations/8c\:fd\:f0\:0a\:8e\:df/dump_tid_stats Driver Rx pkt stats per tid, ([tid] count) ------------------------------------------ MSDUs from FW [00] 2567 [05] 3178 [06] 1089 MSDUs unchained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:chained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:filtered [00] 0 [05] 0 [06] 0 MSDUs queued for mac80211 [00] 2567 [05] 3178 [06] 1089 MSDUs with error:fcs_err [00] 0 [05] 0 [06] 2 MSDUs with error:tkip_err [00] 0 [05] 0 [06] 0 MSDUs with error:crypt_err [00] 0 [05] 0 [06] 0 MSDUs with error:peer_idx_inval [00] 0 [05] 0 [06] 0 A-MPDU num subframes upto 10 [00] 2567 [05] 3178 [06] 1087 A-MPDU num subframes 11-20 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 21-30 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 31-40 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 41-50 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 51-60 [00] 0 [05] 0 [06] 0 A-MPDU num subframes >60 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 1 [00] 2567 [05] 3178 [06] 1089 A-MSDU num subframes 2 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 3 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 4 [00] 0 [05] 0 [06] 0 A-MSDU num subframes >4 [00] 0 [05] 0 [06] 0 Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-14 17:14:06 +07:00
if (drop_cnt)
*drop_cnt += skb_queue_len(amsdu);
__skb_queue_purge(amsdu);
}
static int ath10k_htt_rx_handle_amsdu(struct ath10k_htt *htt)
{
struct ath10k *ar = htt->ar;
ath10k: fix get rx_status from htt context On handling amsdu on rx path, get the rx_status from htt context. Without this fix, we are seeing warnings when running DBDC traffic like this. WARNING: CPU: 0 PID: 0 at net/mac80211/rx.c:4105 ieee80211_rx_napi+0x88/0x7d8 [mac80211]() [ 1715.878248] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.18.21 #1 [ 1715.878273] [<c001d3f4>] (unwind_backtrace) from [<c001a4b0>] (show_stack+0x10/0x14) [ 1715.878293] [<c001a4b0>] (show_stack) from [<c01bee64>] (dump_stack+0x70/0xbc) [ 1715.878315] [<c01bee64>] (dump_stack) from [<c002a61c>] (warn_slowpath_common+0x64/0x88) [ 1715.878339] [<c002a61c>] (warn_slowpath_common) from [<c002a6d0>] (warn_slowpath_null+0x18/0x20) [ 1715.878395] [<c002a6d0>] (warn_slowpath_null) from [<bf4caa98>] (ieee80211_rx_napi+0x88/0x7d8 [mac80211]) [ 1715.878474] [<bf4caa98>] (ieee80211_rx_napi [mac80211]) from [<bf568658>] (ath10k_htt_t2h_msg_handler+0xb48/0xbfc [ath10k_core]) [ 1715.878535] [<bf568658>] (ath10k_htt_t2h_msg_handler [ath10k_core]) from [<bf568708>] (ath10k_htt_t2h_msg_handler+0xbf8/0xbfc [ath10k_core]) [ 1715.878597] [<bf568708>] (ath10k_htt_t2h_msg_handler [ath10k_core]) from [<bf569160>] (ath10k_htt_txrx_compl_task+0xa54/0x1170 [ath10k_core]) [ 1715.878639] [<bf569160>] (ath10k_htt_txrx_compl_task [ath10k_core]) from [<c002db14>] (tasklet_action+0xb4/0x130) [ 1715.878659] [<c002db14>] (tasklet_action) from [<c002d110>] (__do_softirq+0xe0/0x210) [ 1715.878678] [<c002d110>] (__do_softirq) from [<c002d4b4>] (irq_exit+0x84/0xe0) [ 1715.878700] [<c002d4b4>] (irq_exit) from [<c005a544>] (__handle_domain_irq+0x98/0xd0) [ 1715.878722] [<c005a544>] (__handle_domain_irq) from [<c00085f4>] (gic_handle_irq+0x38/0x5c) [ 1715.878741] [<c00085f4>] (gic_handle_irq) from [<c0009680>] (__irq_svc+0x40/0x74) [ 1715.878753] Exception stack(0xc05f9f50 to 0xc05f9f98) [ 1715.878767] 9f40: ffffffed 00000000 00399e1e c000a220 [ 1715.878786] 9f60: 00000000 c05f6780 c05f8000 00000000 c05f5db8 ffffffed c05f8000 c04d1980 [ 1715.878802] 9f80: 00000000 c05f9f98 c0018110 c0018114 60000013 ffffffff [ 1715.878822] [<c0009680>] (__irq_svc) from [<c0018114>] (arch_cpu_idle+0x2c/0x50) [ 1715.878844] [<c0018114>] (arch_cpu_idle) from [<c00530d4>] (cpu_startup_entry+0x108/0x234) [ 1715.878866] [<c00530d4>] (cpu_startup_entry) from [<c05c7be0>] (start_kernel+0x33c/0x3b8) [ 1715.878879] ---[ end trace 6d5e1cc0fef8ed6a ]--- [ 1715.878899] ------------[ cut here ]------------ Fixes: 18235664e7f9 ("ath10k: cleanup amsdu processing for rx indication") Signed-off-by: Ashok Raj Nagarajan <arnagara@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-08-19 17:37:37 +07:00
struct ieee80211_rx_status *rx_status = &htt->rx_status;
struct sk_buff_head amsdu;
int ret;
ath10k: add sta rx packet stats per tid Added per tid sta counters for the following - Total number MSDUs received from firmware - Number of MSDUs received with errors like decryption, crc, mic ,etc. - Number of MSDUs dropped in the driver - A-MPDU/A-MSDU subframe stats - Number of MSDUS passed to mac80211 All stats other than A-MPDU stats are only for received data frames. A-MPDU stats might have stats for management frames when monitor interface is active where management frames are notified both in wmi and HTT interfaces. These per tid stats can be enabled with tid bitmask through a debugfs like below echo <tid_bitmask> > /sys/kernel/debug/ieee80211/phyX/ath10k/sta_tid_stats_mask tid 16 (tid_bitmask 0x10000) is used for non-qos data/management frames The stats are read from /sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/<sta_mac>/dump_tid_stats Sample output: To enable rx stats for tid 0, 5 and 6, echo 0x00000061 > /sys/kernel/debug/ieee80211/phy0/ath10k/sta_tid_stats_mask cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan15/stations/8c\:fd\:f0\:0a\:8e\:df/dump_tid_stats Driver Rx pkt stats per tid, ([tid] count) ------------------------------------------ MSDUs from FW [00] 2567 [05] 3178 [06] 1089 MSDUs unchained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:chained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:filtered [00] 0 [05] 0 [06] 0 MSDUs queued for mac80211 [00] 2567 [05] 3178 [06] 1089 MSDUs with error:fcs_err [00] 0 [05] 0 [06] 2 MSDUs with error:tkip_err [00] 0 [05] 0 [06] 0 MSDUs with error:crypt_err [00] 0 [05] 0 [06] 0 MSDUs with error:peer_idx_inval [00] 0 [05] 0 [06] 0 A-MPDU num subframes upto 10 [00] 2567 [05] 3178 [06] 1087 A-MPDU num subframes 11-20 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 21-30 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 31-40 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 41-50 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 51-60 [00] 0 [05] 0 [06] 0 A-MPDU num subframes >60 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 1 [00] 2567 [05] 3178 [06] 1089 A-MSDU num subframes 2 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 3 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 4 [00] 0 [05] 0 [06] 0 A-MSDU num subframes >4 [00] 0 [05] 0 [06] 0 Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-14 17:14:06 +07:00
unsigned long int drop_cnt = 0;
unsigned long int unchain_cnt = 0;
unsigned long int drop_cnt_filter = 0;
unsigned long int msdus_to_queue, num_msdus;
enum ath10k_pkt_rx_err err = ATH10K_PKT_RX_ERR_MAX;
u8 first_hdr[RX_HTT_HDR_STATUS_LEN];
__skb_queue_head_init(&amsdu);
spin_lock_bh(&htt->rx_ring.lock);
if (htt->rx_confused) {
spin_unlock_bh(&htt->rx_ring.lock);
return -EIO;
}
ret = ath10k_htt_rx_amsdu_pop(htt, &amsdu);
spin_unlock_bh(&htt->rx_ring.lock);
if (ret < 0) {
ath10k_warn(ar, "rx ring became corrupted: %d\n", ret);
__skb_queue_purge(&amsdu);
/* FIXME: It's probably a good idea to reboot the
* device instead of leaving it inoperable.
*/
htt->rx_confused = true;
return ret;
}
ath10k: add sta rx packet stats per tid Added per tid sta counters for the following - Total number MSDUs received from firmware - Number of MSDUs received with errors like decryption, crc, mic ,etc. - Number of MSDUs dropped in the driver - A-MPDU/A-MSDU subframe stats - Number of MSDUS passed to mac80211 All stats other than A-MPDU stats are only for received data frames. A-MPDU stats might have stats for management frames when monitor interface is active where management frames are notified both in wmi and HTT interfaces. These per tid stats can be enabled with tid bitmask through a debugfs like below echo <tid_bitmask> > /sys/kernel/debug/ieee80211/phyX/ath10k/sta_tid_stats_mask tid 16 (tid_bitmask 0x10000) is used for non-qos data/management frames The stats are read from /sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/<sta_mac>/dump_tid_stats Sample output: To enable rx stats for tid 0, 5 and 6, echo 0x00000061 > /sys/kernel/debug/ieee80211/phy0/ath10k/sta_tid_stats_mask cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan15/stations/8c\:fd\:f0\:0a\:8e\:df/dump_tid_stats Driver Rx pkt stats per tid, ([tid] count) ------------------------------------------ MSDUs from FW [00] 2567 [05] 3178 [06] 1089 MSDUs unchained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:chained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:filtered [00] 0 [05] 0 [06] 0 MSDUs queued for mac80211 [00] 2567 [05] 3178 [06] 1089 MSDUs with error:fcs_err [00] 0 [05] 0 [06] 2 MSDUs with error:tkip_err [00] 0 [05] 0 [06] 0 MSDUs with error:crypt_err [00] 0 [05] 0 [06] 0 MSDUs with error:peer_idx_inval [00] 0 [05] 0 [06] 0 A-MPDU num subframes upto 10 [00] 2567 [05] 3178 [06] 1087 A-MPDU num subframes 11-20 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 21-30 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 31-40 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 41-50 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 51-60 [00] 0 [05] 0 [06] 0 A-MPDU num subframes >60 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 1 [00] 2567 [05] 3178 [06] 1089 A-MSDU num subframes 2 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 3 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 4 [00] 0 [05] 0 [06] 0 A-MSDU num subframes >4 [00] 0 [05] 0 [06] 0 Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-14 17:14:06 +07:00
num_msdus = skb_queue_len(&amsdu);
ath10k: fix get rx_status from htt context On handling amsdu on rx path, get the rx_status from htt context. Without this fix, we are seeing warnings when running DBDC traffic like this. WARNING: CPU: 0 PID: 0 at net/mac80211/rx.c:4105 ieee80211_rx_napi+0x88/0x7d8 [mac80211]() [ 1715.878248] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.18.21 #1 [ 1715.878273] [<c001d3f4>] (unwind_backtrace) from [<c001a4b0>] (show_stack+0x10/0x14) [ 1715.878293] [<c001a4b0>] (show_stack) from [<c01bee64>] (dump_stack+0x70/0xbc) [ 1715.878315] [<c01bee64>] (dump_stack) from [<c002a61c>] (warn_slowpath_common+0x64/0x88) [ 1715.878339] [<c002a61c>] (warn_slowpath_common) from [<c002a6d0>] (warn_slowpath_null+0x18/0x20) [ 1715.878395] [<c002a6d0>] (warn_slowpath_null) from [<bf4caa98>] (ieee80211_rx_napi+0x88/0x7d8 [mac80211]) [ 1715.878474] [<bf4caa98>] (ieee80211_rx_napi [mac80211]) from [<bf568658>] (ath10k_htt_t2h_msg_handler+0xb48/0xbfc [ath10k_core]) [ 1715.878535] [<bf568658>] (ath10k_htt_t2h_msg_handler [ath10k_core]) from [<bf568708>] (ath10k_htt_t2h_msg_handler+0xbf8/0xbfc [ath10k_core]) [ 1715.878597] [<bf568708>] (ath10k_htt_t2h_msg_handler [ath10k_core]) from [<bf569160>] (ath10k_htt_txrx_compl_task+0xa54/0x1170 [ath10k_core]) [ 1715.878639] [<bf569160>] (ath10k_htt_txrx_compl_task [ath10k_core]) from [<c002db14>] (tasklet_action+0xb4/0x130) [ 1715.878659] [<c002db14>] (tasklet_action) from [<c002d110>] (__do_softirq+0xe0/0x210) [ 1715.878678] [<c002d110>] (__do_softirq) from [<c002d4b4>] (irq_exit+0x84/0xe0) [ 1715.878700] [<c002d4b4>] (irq_exit) from [<c005a544>] (__handle_domain_irq+0x98/0xd0) [ 1715.878722] [<c005a544>] (__handle_domain_irq) from [<c00085f4>] (gic_handle_irq+0x38/0x5c) [ 1715.878741] [<c00085f4>] (gic_handle_irq) from [<c0009680>] (__irq_svc+0x40/0x74) [ 1715.878753] Exception stack(0xc05f9f50 to 0xc05f9f98) [ 1715.878767] 9f40: ffffffed 00000000 00399e1e c000a220 [ 1715.878786] 9f60: 00000000 c05f6780 c05f8000 00000000 c05f5db8 ffffffed c05f8000 c04d1980 [ 1715.878802] 9f80: 00000000 c05f9f98 c0018110 c0018114 60000013 ffffffff [ 1715.878822] [<c0009680>] (__irq_svc) from [<c0018114>] (arch_cpu_idle+0x2c/0x50) [ 1715.878844] [<c0018114>] (arch_cpu_idle) from [<c00530d4>] (cpu_startup_entry+0x108/0x234) [ 1715.878866] [<c00530d4>] (cpu_startup_entry) from [<c05c7be0>] (start_kernel+0x33c/0x3b8) [ 1715.878879] ---[ end trace 6d5e1cc0fef8ed6a ]--- [ 1715.878899] ------------[ cut here ]------------ Fixes: 18235664e7f9 ("ath10k: cleanup amsdu processing for rx indication") Signed-off-by: Ashok Raj Nagarajan <arnagara@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-08-19 17:37:37 +07:00
ath10k_htt_rx_h_ppdu(ar, &amsdu, rx_status, 0xffff);
/* only for ret = 1 indicates chained msdus */
if (ret > 0)
ath10k: add sta rx packet stats per tid Added per tid sta counters for the following - Total number MSDUs received from firmware - Number of MSDUs received with errors like decryption, crc, mic ,etc. - Number of MSDUs dropped in the driver - A-MPDU/A-MSDU subframe stats - Number of MSDUS passed to mac80211 All stats other than A-MPDU stats are only for received data frames. A-MPDU stats might have stats for management frames when monitor interface is active where management frames are notified both in wmi and HTT interfaces. These per tid stats can be enabled with tid bitmask through a debugfs like below echo <tid_bitmask> > /sys/kernel/debug/ieee80211/phyX/ath10k/sta_tid_stats_mask tid 16 (tid_bitmask 0x10000) is used for non-qos data/management frames The stats are read from /sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/<sta_mac>/dump_tid_stats Sample output: To enable rx stats for tid 0, 5 and 6, echo 0x00000061 > /sys/kernel/debug/ieee80211/phy0/ath10k/sta_tid_stats_mask cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan15/stations/8c\:fd\:f0\:0a\:8e\:df/dump_tid_stats Driver Rx pkt stats per tid, ([tid] count) ------------------------------------------ MSDUs from FW [00] 2567 [05] 3178 [06] 1089 MSDUs unchained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:chained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:filtered [00] 0 [05] 0 [06] 0 MSDUs queued for mac80211 [00] 2567 [05] 3178 [06] 1089 MSDUs with error:fcs_err [00] 0 [05] 0 [06] 2 MSDUs with error:tkip_err [00] 0 [05] 0 [06] 0 MSDUs with error:crypt_err [00] 0 [05] 0 [06] 0 MSDUs with error:peer_idx_inval [00] 0 [05] 0 [06] 0 A-MPDU num subframes upto 10 [00] 2567 [05] 3178 [06] 1087 A-MPDU num subframes 11-20 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 21-30 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 31-40 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 41-50 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 51-60 [00] 0 [05] 0 [06] 0 A-MPDU num subframes >60 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 1 [00] 2567 [05] 3178 [06] 1089 A-MSDU num subframes 2 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 3 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 4 [00] 0 [05] 0 [06] 0 A-MSDU num subframes >4 [00] 0 [05] 0 [06] 0 Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-14 17:14:06 +07:00
ath10k_htt_rx_h_unchain(ar, &amsdu, &drop_cnt, &unchain_cnt);
ath10k: add sta rx packet stats per tid Added per tid sta counters for the following - Total number MSDUs received from firmware - Number of MSDUs received with errors like decryption, crc, mic ,etc. - Number of MSDUs dropped in the driver - A-MPDU/A-MSDU subframe stats - Number of MSDUS passed to mac80211 All stats other than A-MPDU stats are only for received data frames. A-MPDU stats might have stats for management frames when monitor interface is active where management frames are notified both in wmi and HTT interfaces. These per tid stats can be enabled with tid bitmask through a debugfs like below echo <tid_bitmask> > /sys/kernel/debug/ieee80211/phyX/ath10k/sta_tid_stats_mask tid 16 (tid_bitmask 0x10000) is used for non-qos data/management frames The stats are read from /sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/<sta_mac>/dump_tid_stats Sample output: To enable rx stats for tid 0, 5 and 6, echo 0x00000061 > /sys/kernel/debug/ieee80211/phy0/ath10k/sta_tid_stats_mask cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan15/stations/8c\:fd\:f0\:0a\:8e\:df/dump_tid_stats Driver Rx pkt stats per tid, ([tid] count) ------------------------------------------ MSDUs from FW [00] 2567 [05] 3178 [06] 1089 MSDUs unchained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:chained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:filtered [00] 0 [05] 0 [06] 0 MSDUs queued for mac80211 [00] 2567 [05] 3178 [06] 1089 MSDUs with error:fcs_err [00] 0 [05] 0 [06] 2 MSDUs with error:tkip_err [00] 0 [05] 0 [06] 0 MSDUs with error:crypt_err [00] 0 [05] 0 [06] 0 MSDUs with error:peer_idx_inval [00] 0 [05] 0 [06] 0 A-MPDU num subframes upto 10 [00] 2567 [05] 3178 [06] 1087 A-MPDU num subframes 11-20 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 21-30 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 31-40 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 41-50 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 51-60 [00] 0 [05] 0 [06] 0 A-MPDU num subframes >60 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 1 [00] 2567 [05] 3178 [06] 1089 A-MSDU num subframes 2 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 3 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 4 [00] 0 [05] 0 [06] 0 A-MSDU num subframes >4 [00] 0 [05] 0 [06] 0 Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-14 17:14:06 +07:00
ath10k_htt_rx_h_filter(ar, &amsdu, rx_status, &drop_cnt_filter);
ath10k_htt_rx_h_mpdu(ar, &amsdu, rx_status, true, first_hdr, &err);
msdus_to_queue = skb_queue_len(&amsdu);
ath10k_htt_rx_h_enqueue(ar, &amsdu, rx_status);
ath10k: add sta rx packet stats per tid Added per tid sta counters for the following - Total number MSDUs received from firmware - Number of MSDUs received with errors like decryption, crc, mic ,etc. - Number of MSDUs dropped in the driver - A-MPDU/A-MSDU subframe stats - Number of MSDUS passed to mac80211 All stats other than A-MPDU stats are only for received data frames. A-MPDU stats might have stats for management frames when monitor interface is active where management frames are notified both in wmi and HTT interfaces. These per tid stats can be enabled with tid bitmask through a debugfs like below echo <tid_bitmask> > /sys/kernel/debug/ieee80211/phyX/ath10k/sta_tid_stats_mask tid 16 (tid_bitmask 0x10000) is used for non-qos data/management frames The stats are read from /sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/<sta_mac>/dump_tid_stats Sample output: To enable rx stats for tid 0, 5 and 6, echo 0x00000061 > /sys/kernel/debug/ieee80211/phy0/ath10k/sta_tid_stats_mask cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan15/stations/8c\:fd\:f0\:0a\:8e\:df/dump_tid_stats Driver Rx pkt stats per tid, ([tid] count) ------------------------------------------ MSDUs from FW [00] 2567 [05] 3178 [06] 1089 MSDUs unchained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:chained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:filtered [00] 0 [05] 0 [06] 0 MSDUs queued for mac80211 [00] 2567 [05] 3178 [06] 1089 MSDUs with error:fcs_err [00] 0 [05] 0 [06] 2 MSDUs with error:tkip_err [00] 0 [05] 0 [06] 0 MSDUs with error:crypt_err [00] 0 [05] 0 [06] 0 MSDUs with error:peer_idx_inval [00] 0 [05] 0 [06] 0 A-MPDU num subframes upto 10 [00] 2567 [05] 3178 [06] 1087 A-MPDU num subframes 11-20 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 21-30 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 31-40 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 41-50 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 51-60 [00] 0 [05] 0 [06] 0 A-MPDU num subframes >60 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 1 [00] 2567 [05] 3178 [06] 1089 A-MSDU num subframes 2 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 3 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 4 [00] 0 [05] 0 [06] 0 A-MSDU num subframes >4 [00] 0 [05] 0 [06] 0 Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-14 17:14:06 +07:00
ath10k_sta_update_rx_tid_stats(ar, first_hdr, num_msdus, err,
unchain_cnt, drop_cnt, drop_cnt_filter,
msdus_to_queue);
return 0;
}
static void ath10k_htt_rx_proc_rx_ind(struct ath10k_htt *htt,
struct htt_rx_indication *rx)
{
struct ath10k *ar = htt->ar;
struct htt_rx_indication_mpdu_range *mpdu_ranges;
int num_mpdu_ranges;
int i, mpdu_count = 0;
ath10k: add sta rx packet stats per tid Added per tid sta counters for the following - Total number MSDUs received from firmware - Number of MSDUs received with errors like decryption, crc, mic ,etc. - Number of MSDUs dropped in the driver - A-MPDU/A-MSDU subframe stats - Number of MSDUS passed to mac80211 All stats other than A-MPDU stats are only for received data frames. A-MPDU stats might have stats for management frames when monitor interface is active where management frames are notified both in wmi and HTT interfaces. These per tid stats can be enabled with tid bitmask through a debugfs like below echo <tid_bitmask> > /sys/kernel/debug/ieee80211/phyX/ath10k/sta_tid_stats_mask tid 16 (tid_bitmask 0x10000) is used for non-qos data/management frames The stats are read from /sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/<sta_mac>/dump_tid_stats Sample output: To enable rx stats for tid 0, 5 and 6, echo 0x00000061 > /sys/kernel/debug/ieee80211/phy0/ath10k/sta_tid_stats_mask cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan15/stations/8c\:fd\:f0\:0a\:8e\:df/dump_tid_stats Driver Rx pkt stats per tid, ([tid] count) ------------------------------------------ MSDUs from FW [00] 2567 [05] 3178 [06] 1089 MSDUs unchained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:chained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:filtered [00] 0 [05] 0 [06] 0 MSDUs queued for mac80211 [00] 2567 [05] 3178 [06] 1089 MSDUs with error:fcs_err [00] 0 [05] 0 [06] 2 MSDUs with error:tkip_err [00] 0 [05] 0 [06] 0 MSDUs with error:crypt_err [00] 0 [05] 0 [06] 0 MSDUs with error:peer_idx_inval [00] 0 [05] 0 [06] 0 A-MPDU num subframes upto 10 [00] 2567 [05] 3178 [06] 1087 A-MPDU num subframes 11-20 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 21-30 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 31-40 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 41-50 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 51-60 [00] 0 [05] 0 [06] 0 A-MPDU num subframes >60 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 1 [00] 2567 [05] 3178 [06] 1089 A-MSDU num subframes 2 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 3 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 4 [00] 0 [05] 0 [06] 0 A-MSDU num subframes >4 [00] 0 [05] 0 [06] 0 Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-14 17:14:06 +07:00
u16 peer_id;
u8 tid;
num_mpdu_ranges = MS(__le32_to_cpu(rx->hdr.info1),
HTT_RX_INDICATION_INFO1_NUM_MPDU_RANGES);
ath10k: add sta rx packet stats per tid Added per tid sta counters for the following - Total number MSDUs received from firmware - Number of MSDUs received with errors like decryption, crc, mic ,etc. - Number of MSDUs dropped in the driver - A-MPDU/A-MSDU subframe stats - Number of MSDUS passed to mac80211 All stats other than A-MPDU stats are only for received data frames. A-MPDU stats might have stats for management frames when monitor interface is active where management frames are notified both in wmi and HTT interfaces. These per tid stats can be enabled with tid bitmask through a debugfs like below echo <tid_bitmask> > /sys/kernel/debug/ieee80211/phyX/ath10k/sta_tid_stats_mask tid 16 (tid_bitmask 0x10000) is used for non-qos data/management frames The stats are read from /sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/<sta_mac>/dump_tid_stats Sample output: To enable rx stats for tid 0, 5 and 6, echo 0x00000061 > /sys/kernel/debug/ieee80211/phy0/ath10k/sta_tid_stats_mask cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan15/stations/8c\:fd\:f0\:0a\:8e\:df/dump_tid_stats Driver Rx pkt stats per tid, ([tid] count) ------------------------------------------ MSDUs from FW [00] 2567 [05] 3178 [06] 1089 MSDUs unchained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:chained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:filtered [00] 0 [05] 0 [06] 0 MSDUs queued for mac80211 [00] 2567 [05] 3178 [06] 1089 MSDUs with error:fcs_err [00] 0 [05] 0 [06] 2 MSDUs with error:tkip_err [00] 0 [05] 0 [06] 0 MSDUs with error:crypt_err [00] 0 [05] 0 [06] 0 MSDUs with error:peer_idx_inval [00] 0 [05] 0 [06] 0 A-MPDU num subframes upto 10 [00] 2567 [05] 3178 [06] 1087 A-MPDU num subframes 11-20 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 21-30 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 31-40 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 41-50 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 51-60 [00] 0 [05] 0 [06] 0 A-MPDU num subframes >60 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 1 [00] 2567 [05] 3178 [06] 1089 A-MSDU num subframes 2 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 3 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 4 [00] 0 [05] 0 [06] 0 A-MSDU num subframes >4 [00] 0 [05] 0 [06] 0 Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-14 17:14:06 +07:00
peer_id = __le16_to_cpu(rx->hdr.peer_id);
tid = MS(rx->hdr.info0, HTT_RX_INDICATION_INFO0_EXT_TID);
mpdu_ranges = htt_rx_ind_get_mpdu_ranges(rx);
ath10k_dbg_dump(ar, ATH10K_DBG_HTT_DUMP, NULL, "htt rx ind: ",
rx, sizeof(*rx) +
(sizeof(struct htt_rx_indication_mpdu_range) *
num_mpdu_ranges));
for (i = 0; i < num_mpdu_ranges; i++)
mpdu_count += mpdu_ranges[i].mpdu_count;
atomic_add(mpdu_count, &htt->num_mpdus_ready);
ath10k: add sta rx packet stats per tid Added per tid sta counters for the following - Total number MSDUs received from firmware - Number of MSDUs received with errors like decryption, crc, mic ,etc. - Number of MSDUs dropped in the driver - A-MPDU/A-MSDU subframe stats - Number of MSDUS passed to mac80211 All stats other than A-MPDU stats are only for received data frames. A-MPDU stats might have stats for management frames when monitor interface is active where management frames are notified both in wmi and HTT interfaces. These per tid stats can be enabled with tid bitmask through a debugfs like below echo <tid_bitmask> > /sys/kernel/debug/ieee80211/phyX/ath10k/sta_tid_stats_mask tid 16 (tid_bitmask 0x10000) is used for non-qos data/management frames The stats are read from /sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/<sta_mac>/dump_tid_stats Sample output: To enable rx stats for tid 0, 5 and 6, echo 0x00000061 > /sys/kernel/debug/ieee80211/phy0/ath10k/sta_tid_stats_mask cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan15/stations/8c\:fd\:f0\:0a\:8e\:df/dump_tid_stats Driver Rx pkt stats per tid, ([tid] count) ------------------------------------------ MSDUs from FW [00] 2567 [05] 3178 [06] 1089 MSDUs unchained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:chained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:filtered [00] 0 [05] 0 [06] 0 MSDUs queued for mac80211 [00] 2567 [05] 3178 [06] 1089 MSDUs with error:fcs_err [00] 0 [05] 0 [06] 2 MSDUs with error:tkip_err [00] 0 [05] 0 [06] 0 MSDUs with error:crypt_err [00] 0 [05] 0 [06] 0 MSDUs with error:peer_idx_inval [00] 0 [05] 0 [06] 0 A-MPDU num subframes upto 10 [00] 2567 [05] 3178 [06] 1087 A-MPDU num subframes 11-20 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 21-30 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 31-40 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 41-50 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 51-60 [00] 0 [05] 0 [06] 0 A-MPDU num subframes >60 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 1 [00] 2567 [05] 3178 [06] 1089 A-MSDU num subframes 2 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 3 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 4 [00] 0 [05] 0 [06] 0 A-MSDU num subframes >4 [00] 0 [05] 0 [06] 0 Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-14 17:14:06 +07:00
ath10k_sta_update_rx_tid_stats_ampdu(ar, peer_id, tid, mpdu_ranges,
num_mpdu_ranges);
}
static void ath10k_htt_rx_tx_compl_ind(struct ath10k *ar,
struct sk_buff *skb)
{
struct ath10k_htt *htt = &ar->htt;
struct htt_resp *resp = (struct htt_resp *)skb->data;
struct htt_tx_done tx_done = {};
int status = MS(resp->data_tx_completion.flags, HTT_DATA_TX_STATUS);
__le16 msdu_id;
int i;
switch (status) {
case HTT_DATA_TX_STATUS_NO_ACK:
tx_done.status = HTT_TX_COMPL_STATE_NOACK;
break;
case HTT_DATA_TX_STATUS_OK:
tx_done.status = HTT_TX_COMPL_STATE_ACK;
break;
case HTT_DATA_TX_STATUS_DISCARD:
case HTT_DATA_TX_STATUS_POSTPONE:
case HTT_DATA_TX_STATUS_DOWNLOAD_FAIL:
tx_done.status = HTT_TX_COMPL_STATE_DISCARD;
break;
default:
ath10k_warn(ar, "unhandled tx completion status %d\n", status);
tx_done.status = HTT_TX_COMPL_STATE_DISCARD;
break;
}
ath10k_dbg(ar, ATH10K_DBG_HTT, "htt tx completion num_msdus %d\n",
resp->data_tx_completion.num_msdus);
for (i = 0; i < resp->data_tx_completion.num_msdus; i++) {
msdu_id = resp->data_tx_completion.msdus[i];
tx_done.msdu_id = __le16_to_cpu(msdu_id);
/* kfifo_put: In practice firmware shouldn't fire off per-CE
* interrupt and main interrupt (MSI/-X range case) for the same
* HTC service so it should be safe to use kfifo_put w/o lock.
*
* From kfifo_put() documentation:
* Note that with only one concurrent reader and one concurrent
* writer, you don't need extra locking to use these macro.
*/
if (!kfifo_put(&htt->txdone_fifo, tx_done)) {
ath10k_warn(ar, "txdone fifo overrun, msdu_id %d status %d\n",
tx_done.msdu_id, tx_done.status);
ath10k_txrx_tx_unref(htt, &tx_done);
}
}
}
static void ath10k_htt_rx_addba(struct ath10k *ar, struct htt_resp *resp)
{
struct htt_rx_addba *ev = &resp->rx_addba;
struct ath10k_peer *peer;
struct ath10k_vif *arvif;
u16 info0, tid, peer_id;
info0 = __le16_to_cpu(ev->info0);
tid = MS(info0, HTT_RX_BA_INFO0_TID);
peer_id = MS(info0, HTT_RX_BA_INFO0_PEER_ID);
ath10k_dbg(ar, ATH10K_DBG_HTT,
"htt rx addba tid %hu peer_id %hu size %hhu\n",
tid, peer_id, ev->window_size);
spin_lock_bh(&ar->data_lock);
peer = ath10k_peer_find_by_id(ar, peer_id);
if (!peer) {
ath10k_warn(ar, "received addba event for invalid peer_id: %hu\n",
peer_id);
spin_unlock_bh(&ar->data_lock);
return;
}
arvif = ath10k_get_arvif(ar, peer->vdev_id);
if (!arvif) {
ath10k_warn(ar, "received addba event for invalid vdev_id: %u\n",
peer->vdev_id);
spin_unlock_bh(&ar->data_lock);
return;
}
ath10k_dbg(ar, ATH10K_DBG_HTT,
"htt rx start rx ba session sta %pM tid %hu size %hhu\n",
peer->addr, tid, ev->window_size);
ieee80211_start_rx_ba_session_offl(arvif->vif, peer->addr, tid);
spin_unlock_bh(&ar->data_lock);
}
static void ath10k_htt_rx_delba(struct ath10k *ar, struct htt_resp *resp)
{
struct htt_rx_delba *ev = &resp->rx_delba;
struct ath10k_peer *peer;
struct ath10k_vif *arvif;
u16 info0, tid, peer_id;
info0 = __le16_to_cpu(ev->info0);
tid = MS(info0, HTT_RX_BA_INFO0_TID);
peer_id = MS(info0, HTT_RX_BA_INFO0_PEER_ID);
ath10k_dbg(ar, ATH10K_DBG_HTT,
"htt rx delba tid %hu peer_id %hu\n",
tid, peer_id);
spin_lock_bh(&ar->data_lock);
peer = ath10k_peer_find_by_id(ar, peer_id);
if (!peer) {
ath10k_warn(ar, "received addba event for invalid peer_id: %hu\n",
peer_id);
spin_unlock_bh(&ar->data_lock);
return;
}
arvif = ath10k_get_arvif(ar, peer->vdev_id);
if (!arvif) {
ath10k_warn(ar, "received addba event for invalid vdev_id: %u\n",
peer->vdev_id);
spin_unlock_bh(&ar->data_lock);
return;
}
ath10k_dbg(ar, ATH10K_DBG_HTT,
"htt rx stop rx ba session sta %pM tid %hu\n",
peer->addr, tid);
ieee80211_stop_rx_ba_session_offl(arvif->vif, peer->addr, tid);
spin_unlock_bh(&ar->data_lock);
}
static int ath10k_htt_rx_extract_amsdu(struct sk_buff_head *list,
struct sk_buff_head *amsdu)
{
struct sk_buff *msdu;
struct htt_rx_desc *rxd;
if (skb_queue_empty(list))
return -ENOBUFS;
if (WARN_ON(!skb_queue_empty(amsdu)))
return -EINVAL;
while ((msdu = __skb_dequeue(list))) {
__skb_queue_tail(amsdu, msdu);
rxd = (void *)msdu->data - sizeof(*rxd);
if (rxd->msdu_end.common.info0 &
__cpu_to_le32(RX_MSDU_END_INFO0_LAST_MSDU))
break;
}
msdu = skb_peek_tail(amsdu);
rxd = (void *)msdu->data - sizeof(*rxd);
if (!(rxd->msdu_end.common.info0 &
__cpu_to_le32(RX_MSDU_END_INFO0_LAST_MSDU))) {
skb_queue_splice_init(amsdu, list);
return -EAGAIN;
}
return 0;
}
static void ath10k_htt_rx_h_rx_offload_prot(struct ieee80211_rx_status *status,
struct sk_buff *skb)
{
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
if (!ieee80211_has_protected(hdr->frame_control))
return;
/* Offloaded frames are already decrypted but firmware insists they are
* protected in the 802.11 header. Strip the flag. Otherwise mac80211
* will drop the frame.
*/
hdr->frame_control &= ~__cpu_to_le16(IEEE80211_FCTL_PROTECTED);
status->flag |= RX_FLAG_DECRYPTED |
RX_FLAG_IV_STRIPPED |
RX_FLAG_MMIC_STRIPPED;
}
static void ath10k_htt_rx_h_rx_offload(struct ath10k *ar,
struct sk_buff_head *list)
{
struct ath10k_htt *htt = &ar->htt;
struct ieee80211_rx_status *status = &htt->rx_status;
struct htt_rx_offload_msdu *rx;
struct sk_buff *msdu;
size_t offset;
while ((msdu = __skb_dequeue(list))) {
/* Offloaded frames don't have Rx descriptor. Instead they have
* a short meta information header.
*/
rx = (void *)msdu->data;
skb_put(msdu, sizeof(*rx));
skb_pull(msdu, sizeof(*rx));
if (skb_tailroom(msdu) < __le16_to_cpu(rx->msdu_len)) {
ath10k_warn(ar, "dropping frame: offloaded rx msdu is too long!\n");
dev_kfree_skb_any(msdu);
continue;
}
skb_put(msdu, __le16_to_cpu(rx->msdu_len));
/* Offloaded rx header length isn't multiple of 2 nor 4 so the
* actual payload is unaligned. Align the frame. Otherwise
* mac80211 complains. This shouldn't reduce performance much
* because these offloaded frames are rare.
*/
offset = 4 - ((unsigned long)msdu->data & 3);
skb_put(msdu, offset);
memmove(msdu->data + offset, msdu->data, msdu->len);
skb_pull(msdu, offset);
/* FIXME: The frame is NWifi. Re-construct QoS Control
* if possible later.
*/
memset(status, 0, sizeof(*status));
status->flag |= RX_FLAG_NO_SIGNAL_VAL;
ath10k_htt_rx_h_rx_offload_prot(status, msdu);
ath10k_htt_rx_h_channel(ar, status, NULL, rx->vdev_id);
ath10k_htt_rx_h_queue_msdu(ar, status, msdu);
}
}
static int ath10k_htt_rx_in_ord_ind(struct ath10k *ar, struct sk_buff *skb)
{
struct ath10k_htt *htt = &ar->htt;
struct htt_resp *resp = (void *)skb->data;
struct ieee80211_rx_status *status = &htt->rx_status;
struct sk_buff_head list;
struct sk_buff_head amsdu;
u16 peer_id;
u16 msdu_count;
u8 vdev_id;
u8 tid;
bool offload;
bool frag;
int ret;
lockdep_assert_held(&htt->rx_ring.lock);
if (htt->rx_confused)
return -EIO;
skb_pull(skb, sizeof(resp->hdr));
skb_pull(skb, sizeof(resp->rx_in_ord_ind));
peer_id = __le16_to_cpu(resp->rx_in_ord_ind.peer_id);
msdu_count = __le16_to_cpu(resp->rx_in_ord_ind.msdu_count);
vdev_id = resp->rx_in_ord_ind.vdev_id;
tid = SM(resp->rx_in_ord_ind.info, HTT_RX_IN_ORD_IND_INFO_TID);
offload = !!(resp->rx_in_ord_ind.info &
HTT_RX_IN_ORD_IND_INFO_OFFLOAD_MASK);
frag = !!(resp->rx_in_ord_ind.info & HTT_RX_IN_ORD_IND_INFO_FRAG_MASK);
ath10k_dbg(ar, ATH10K_DBG_HTT,
"htt rx in ord vdev %i peer %i tid %i offload %i frag %i msdu count %i\n",
vdev_id, peer_id, tid, offload, frag, msdu_count);
if (skb->len < msdu_count * sizeof(*resp->rx_in_ord_ind.msdu_descs32)) {
ath10k_warn(ar, "dropping invalid in order rx indication\n");
return -EINVAL;
}
/* The event can deliver more than 1 A-MSDU. Each A-MSDU is later
* extracted and processed.
*/
__skb_queue_head_init(&list);
if (ar->hw_params.target_64bit)
ret = ath10k_htt_rx_pop_paddr64_list(htt, &resp->rx_in_ord_ind,
&list);
else
ret = ath10k_htt_rx_pop_paddr32_list(htt, &resp->rx_in_ord_ind,
&list);
if (ret < 0) {
ath10k_warn(ar, "failed to pop paddr list: %d\n", ret);
htt->rx_confused = true;
return -EIO;
}
/* Offloaded frames are very different and need to be handled
* separately.
*/
if (offload)
ath10k_htt_rx_h_rx_offload(ar, &list);
while (!skb_queue_empty(&list)) {
__skb_queue_head_init(&amsdu);
ret = ath10k_htt_rx_extract_amsdu(&list, &amsdu);
switch (ret) {
case 0:
/* Note: The in-order indication may report interleaved
* frames from different PPDUs meaning reported rx rate
* to mac80211 isn't accurate/reliable. It's still
* better to report something than nothing though. This
* should still give an idea about rx rate to the user.
*/
ath10k_htt_rx_h_ppdu(ar, &amsdu, status, vdev_id);
ath10k: add sta rx packet stats per tid Added per tid sta counters for the following - Total number MSDUs received from firmware - Number of MSDUs received with errors like decryption, crc, mic ,etc. - Number of MSDUs dropped in the driver - A-MPDU/A-MSDU subframe stats - Number of MSDUS passed to mac80211 All stats other than A-MPDU stats are only for received data frames. A-MPDU stats might have stats for management frames when monitor interface is active where management frames are notified both in wmi and HTT interfaces. These per tid stats can be enabled with tid bitmask through a debugfs like below echo <tid_bitmask> > /sys/kernel/debug/ieee80211/phyX/ath10k/sta_tid_stats_mask tid 16 (tid_bitmask 0x10000) is used for non-qos data/management frames The stats are read from /sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/<sta_mac>/dump_tid_stats Sample output: To enable rx stats for tid 0, 5 and 6, echo 0x00000061 > /sys/kernel/debug/ieee80211/phy0/ath10k/sta_tid_stats_mask cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan15/stations/8c\:fd\:f0\:0a\:8e\:df/dump_tid_stats Driver Rx pkt stats per tid, ([tid] count) ------------------------------------------ MSDUs from FW [00] 2567 [05] 3178 [06] 1089 MSDUs unchained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:chained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:filtered [00] 0 [05] 0 [06] 0 MSDUs queued for mac80211 [00] 2567 [05] 3178 [06] 1089 MSDUs with error:fcs_err [00] 0 [05] 0 [06] 2 MSDUs with error:tkip_err [00] 0 [05] 0 [06] 0 MSDUs with error:crypt_err [00] 0 [05] 0 [06] 0 MSDUs with error:peer_idx_inval [00] 0 [05] 0 [06] 0 A-MPDU num subframes upto 10 [00] 2567 [05] 3178 [06] 1087 A-MPDU num subframes 11-20 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 21-30 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 31-40 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 41-50 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 51-60 [00] 0 [05] 0 [06] 0 A-MPDU num subframes >60 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 1 [00] 2567 [05] 3178 [06] 1089 A-MSDU num subframes 2 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 3 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 4 [00] 0 [05] 0 [06] 0 A-MSDU num subframes >4 [00] 0 [05] 0 [06] 0 Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-14 17:14:06 +07:00
ath10k_htt_rx_h_filter(ar, &amsdu, status, NULL);
ath10k_htt_rx_h_mpdu(ar, &amsdu, status, false, NULL,
NULL);
ath10k_htt_rx_h_enqueue(ar, &amsdu, status);
break;
case -EAGAIN:
/* fall through */
default:
/* Should not happen. */
ath10k_warn(ar, "failed to extract amsdu: %d\n", ret);
htt->rx_confused = true;
__skb_queue_purge(&list);
return -EIO;
}
}
return ret;
}
static void ath10k_htt_rx_tx_fetch_resp_id_confirm(struct ath10k *ar,
const __le32 *resp_ids,
int num_resp_ids)
{
int i;
u32 resp_id;
ath10k_dbg(ar, ATH10K_DBG_HTT, "htt rx tx fetch confirm num_resp_ids %d\n",
num_resp_ids);
for (i = 0; i < num_resp_ids; i++) {
resp_id = le32_to_cpu(resp_ids[i]);
ath10k_dbg(ar, ATH10K_DBG_HTT, "htt rx tx fetch confirm resp_id %u\n",
resp_id);
/* TODO: free resp_id */
}
}
static void ath10k_htt_rx_tx_fetch_ind(struct ath10k *ar, struct sk_buff *skb)
{
struct ieee80211_hw *hw = ar->hw;
struct ieee80211_txq *txq;
struct htt_resp *resp = (struct htt_resp *)skb->data;
struct htt_tx_fetch_record *record;
size_t len;
size_t max_num_bytes;
size_t max_num_msdus;
size_t num_bytes;
size_t num_msdus;
const __le32 *resp_ids;
u16 num_records;
u16 num_resp_ids;
u16 peer_id;
u8 tid;
int ret;
int i;
ath10k_dbg(ar, ATH10K_DBG_HTT, "htt rx tx fetch ind\n");
len = sizeof(resp->hdr) + sizeof(resp->tx_fetch_ind);
if (unlikely(skb->len < len)) {
ath10k_warn(ar, "received corrupted tx_fetch_ind event: buffer too short\n");
return;
}
num_records = le16_to_cpu(resp->tx_fetch_ind.num_records);
num_resp_ids = le16_to_cpu(resp->tx_fetch_ind.num_resp_ids);
len += sizeof(resp->tx_fetch_ind.records[0]) * num_records;
len += sizeof(resp->tx_fetch_ind.resp_ids[0]) * num_resp_ids;
if (unlikely(skb->len < len)) {
ath10k_warn(ar, "received corrupted tx_fetch_ind event: too many records/resp_ids\n");
return;
}
ath10k_dbg(ar, ATH10K_DBG_HTT, "htt rx tx fetch ind num records %hu num resps %hu seq %hu\n",
num_records, num_resp_ids,
le16_to_cpu(resp->tx_fetch_ind.fetch_seq_num));
if (!ar->htt.tx_q_state.enabled) {
ath10k_warn(ar, "received unexpected tx_fetch_ind event: not enabled\n");
return;
}
if (ar->htt.tx_q_state.mode == HTT_TX_MODE_SWITCH_PUSH) {
ath10k_warn(ar, "received unexpected tx_fetch_ind event: in push mode\n");
return;
}
rcu_read_lock();
for (i = 0; i < num_records; i++) {
record = &resp->tx_fetch_ind.records[i];
peer_id = MS(le16_to_cpu(record->info),
HTT_TX_FETCH_RECORD_INFO_PEER_ID);
tid = MS(le16_to_cpu(record->info),
HTT_TX_FETCH_RECORD_INFO_TID);
max_num_msdus = le16_to_cpu(record->num_msdus);
max_num_bytes = le32_to_cpu(record->num_bytes);
ath10k_dbg(ar, ATH10K_DBG_HTT, "htt rx tx fetch record %i peer_id %hu tid %hhu msdus %zu bytes %zu\n",
i, peer_id, tid, max_num_msdus, max_num_bytes);
if (unlikely(peer_id >= ar->htt.tx_q_state.num_peers) ||
unlikely(tid >= ar->htt.tx_q_state.num_tids)) {
ath10k_warn(ar, "received out of range peer_id %hu tid %hhu\n",
peer_id, tid);
continue;
}
spin_lock_bh(&ar->data_lock);
txq = ath10k_mac_txq_lookup(ar, peer_id, tid);
spin_unlock_bh(&ar->data_lock);
/* It is okay to release the lock and use txq because RCU read
* lock is held.
*/
if (unlikely(!txq)) {
ath10k_warn(ar, "failed to lookup txq for peer_id %hu tid %hhu\n",
peer_id, tid);
continue;
}
num_msdus = 0;
num_bytes = 0;
while (num_msdus < max_num_msdus &&
num_bytes < max_num_bytes) {
ret = ath10k_mac_tx_push_txq(hw, txq);
if (ret < 0)
break;
num_msdus++;
num_bytes += ret;
}
record->num_msdus = cpu_to_le16(num_msdus);
record->num_bytes = cpu_to_le32(num_bytes);
ath10k_htt_tx_txq_recalc(hw, txq);
}
rcu_read_unlock();
resp_ids = ath10k_htt_get_tx_fetch_ind_resp_ids(&resp->tx_fetch_ind);
ath10k_htt_rx_tx_fetch_resp_id_confirm(ar, resp_ids, num_resp_ids);
ret = ath10k_htt_tx_fetch_resp(ar,
resp->tx_fetch_ind.token,
resp->tx_fetch_ind.fetch_seq_num,
resp->tx_fetch_ind.records,
num_records);
if (unlikely(ret)) {
ath10k_warn(ar, "failed to submit tx fetch resp for token 0x%08x: %d\n",
le32_to_cpu(resp->tx_fetch_ind.token), ret);
/* FIXME: request fw restart */
}
ath10k_htt_tx_txq_sync(ar);
}
static void ath10k_htt_rx_tx_fetch_confirm(struct ath10k *ar,
struct sk_buff *skb)
{
const struct htt_resp *resp = (void *)skb->data;
size_t len;
int num_resp_ids;
ath10k_dbg(ar, ATH10K_DBG_HTT, "htt rx tx fetch confirm\n");
len = sizeof(resp->hdr) + sizeof(resp->tx_fetch_confirm);
if (unlikely(skb->len < len)) {
ath10k_warn(ar, "received corrupted tx_fetch_confirm event: buffer too short\n");
return;
}
num_resp_ids = le16_to_cpu(resp->tx_fetch_confirm.num_resp_ids);
len += sizeof(resp->tx_fetch_confirm.resp_ids[0]) * num_resp_ids;
if (unlikely(skb->len < len)) {
ath10k_warn(ar, "received corrupted tx_fetch_confirm event: resp_ids buffer overflow\n");
return;
}
ath10k_htt_rx_tx_fetch_resp_id_confirm(ar,
resp->tx_fetch_confirm.resp_ids,
num_resp_ids);
}
static void ath10k_htt_rx_tx_mode_switch_ind(struct ath10k *ar,
struct sk_buff *skb)
{
const struct htt_resp *resp = (void *)skb->data;
const struct htt_tx_mode_switch_record *record;
struct ieee80211_txq *txq;
struct ath10k_txq *artxq;
size_t len;
size_t num_records;
enum htt_tx_mode_switch_mode mode;
bool enable;
u16 info0;
u16 info1;
u16 threshold;
u16 peer_id;
u8 tid;
int i;
ath10k_dbg(ar, ATH10K_DBG_HTT, "htt rx tx mode switch ind\n");
len = sizeof(resp->hdr) + sizeof(resp->tx_mode_switch_ind);
if (unlikely(skb->len < len)) {
ath10k_warn(ar, "received corrupted tx_mode_switch_ind event: buffer too short\n");
return;
}
info0 = le16_to_cpu(resp->tx_mode_switch_ind.info0);
info1 = le16_to_cpu(resp->tx_mode_switch_ind.info1);
enable = !!(info0 & HTT_TX_MODE_SWITCH_IND_INFO0_ENABLE);
num_records = MS(info0, HTT_TX_MODE_SWITCH_IND_INFO1_THRESHOLD);
mode = MS(info1, HTT_TX_MODE_SWITCH_IND_INFO1_MODE);
threshold = MS(info1, HTT_TX_MODE_SWITCH_IND_INFO1_THRESHOLD);
ath10k_dbg(ar, ATH10K_DBG_HTT,
"htt rx tx mode switch ind info0 0x%04hx info1 0x%04hx enable %d num records %zd mode %d threshold %hu\n",
info0, info1, enable, num_records, mode, threshold);
len += sizeof(resp->tx_mode_switch_ind.records[0]) * num_records;
if (unlikely(skb->len < len)) {
ath10k_warn(ar, "received corrupted tx_mode_switch_mode_ind event: too many records\n");
return;
}
switch (mode) {
case HTT_TX_MODE_SWITCH_PUSH:
case HTT_TX_MODE_SWITCH_PUSH_PULL:
break;
default:
ath10k_warn(ar, "received invalid tx_mode_switch_mode_ind mode %d, ignoring\n",
mode);
return;
}
if (!enable)
return;
ar->htt.tx_q_state.enabled = enable;
ar->htt.tx_q_state.mode = mode;
ar->htt.tx_q_state.num_push_allowed = threshold;
rcu_read_lock();
for (i = 0; i < num_records; i++) {
record = &resp->tx_mode_switch_ind.records[i];
info0 = le16_to_cpu(record->info0);
peer_id = MS(info0, HTT_TX_MODE_SWITCH_RECORD_INFO0_PEER_ID);
tid = MS(info0, HTT_TX_MODE_SWITCH_RECORD_INFO0_TID);
if (unlikely(peer_id >= ar->htt.tx_q_state.num_peers) ||
unlikely(tid >= ar->htt.tx_q_state.num_tids)) {
ath10k_warn(ar, "received out of range peer_id %hu tid %hhu\n",
peer_id, tid);
continue;
}
spin_lock_bh(&ar->data_lock);
txq = ath10k_mac_txq_lookup(ar, peer_id, tid);
spin_unlock_bh(&ar->data_lock);
/* It is okay to release the lock and use txq because RCU read
* lock is held.
*/
if (unlikely(!txq)) {
ath10k_warn(ar, "failed to lookup txq for peer_id %hu tid %hhu\n",
peer_id, tid);
continue;
}
spin_lock_bh(&ar->htt.tx_lock);
artxq = (void *)txq->drv_priv;
artxq->num_push_allowed = le16_to_cpu(record->num_max_msdus);
spin_unlock_bh(&ar->htt.tx_lock);
}
rcu_read_unlock();
ath10k_mac_tx_push_pending(ar);
}
void ath10k_htt_htc_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
{
bool release;
release = ath10k_htt_t2h_msg_handler(ar, skb);
/* Free the indication buffer */
if (release)
dev_kfree_skb_any(skb);
}
static inline bool is_valid_legacy_rate(u8 rate)
{
static const u8 legacy_rates[] = {1, 2, 5, 11, 6, 9, 12,
18, 24, 36, 48, 54};
int i;
for (i = 0; i < ARRAY_SIZE(legacy_rates); i++) {
if (rate == legacy_rates[i])
return true;
}
return false;
}
static void
ath10k_update_per_peer_tx_stats(struct ath10k *ar,
struct ieee80211_sta *sta,
struct ath10k_per_peer_tx_stats *peer_stats)
{
struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
u8 rate = 0, sgi;
struct rate_info txrate;
lockdep_assert_held(&ar->data_lock);
txrate.flags = ATH10K_HW_PREAMBLE(peer_stats->ratecode);
txrate.bw = ATH10K_HW_BW(peer_stats->flags);
txrate.nss = ATH10K_HW_NSS(peer_stats->ratecode);
txrate.mcs = ATH10K_HW_MCS_RATE(peer_stats->ratecode);
sgi = ATH10K_HW_GI(peer_stats->flags);
if (txrate.flags == WMI_RATE_PREAMBLE_VHT && txrate.mcs > 9) {
ath10k_warn(ar, "Invalid VHT mcs %hhd peer stats", txrate.mcs);
return;
}
if (txrate.flags == WMI_RATE_PREAMBLE_HT &&
(txrate.mcs > 7 || txrate.nss < 1)) {
ath10k_warn(ar, "Invalid HT mcs %hhd nss %hhd peer stats",
txrate.mcs, txrate.nss);
return;
}
memset(&arsta->txrate, 0, sizeof(arsta->txrate));
if (txrate.flags == WMI_RATE_PREAMBLE_CCK ||
txrate.flags == WMI_RATE_PREAMBLE_OFDM) {
rate = ATH10K_HW_LEGACY_RATE(peer_stats->ratecode);
if (!is_valid_legacy_rate(rate)) {
ath10k_warn(ar, "Invalid legacy rate %hhd peer stats",
rate);
return;
}
/* This is hacky, FW sends CCK rate 5.5Mbps as 6 */
rate *= 10;
if (rate == 60 && txrate.flags == WMI_RATE_PREAMBLE_CCK)
rate = rate - 5;
arsta->txrate.legacy = rate;
} else if (txrate.flags == WMI_RATE_PREAMBLE_HT) {
arsta->txrate.flags = RATE_INFO_FLAGS_MCS;
arsta->txrate.mcs = txrate.mcs + 8 * (txrate.nss - 1);
} else {
arsta->txrate.flags = RATE_INFO_FLAGS_VHT_MCS;
arsta->txrate.mcs = txrate.mcs;
}
if (sgi)
arsta->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI;
arsta->txrate.nss = txrate.nss;
arsta->txrate.bw = ath10k_bw_to_mac80211_bw(txrate.bw);
}
static void ath10k_htt_fetch_peer_stats(struct ath10k *ar,
struct sk_buff *skb)
{
struct htt_resp *resp = (struct htt_resp *)skb->data;
struct ath10k_per_peer_tx_stats *p_tx_stats = &ar->peer_tx_stats;
struct htt_per_peer_tx_stats_ind *tx_stats;
struct ieee80211_sta *sta;
struct ath10k_peer *peer;
int peer_id, i;
u8 ppdu_len, num_ppdu;
num_ppdu = resp->peer_tx_stats.num_ppdu;
ppdu_len = resp->peer_tx_stats.ppdu_len * sizeof(__le32);
if (skb->len < sizeof(struct htt_resp_hdr) + num_ppdu * ppdu_len) {
ath10k_warn(ar, "Invalid peer stats buf length %d\n", skb->len);
return;
}
tx_stats = (struct htt_per_peer_tx_stats_ind *)
(resp->peer_tx_stats.payload);
peer_id = __le16_to_cpu(tx_stats->peer_id);
rcu_read_lock();
spin_lock_bh(&ar->data_lock);
peer = ath10k_peer_find_by_id(ar, peer_id);
if (!peer) {
ath10k_warn(ar, "Invalid peer id %d peer stats buffer\n",
peer_id);
goto out;
}
sta = peer->sta;
for (i = 0; i < num_ppdu; i++) {
tx_stats = (struct htt_per_peer_tx_stats_ind *)
(resp->peer_tx_stats.payload + i * ppdu_len);
p_tx_stats->succ_bytes = __le32_to_cpu(tx_stats->succ_bytes);
p_tx_stats->retry_bytes = __le32_to_cpu(tx_stats->retry_bytes);
p_tx_stats->failed_bytes =
__le32_to_cpu(tx_stats->failed_bytes);
p_tx_stats->ratecode = tx_stats->ratecode;
p_tx_stats->flags = tx_stats->flags;
p_tx_stats->succ_pkts = __le16_to_cpu(tx_stats->succ_pkts);
p_tx_stats->retry_pkts = __le16_to_cpu(tx_stats->retry_pkts);
p_tx_stats->failed_pkts = __le16_to_cpu(tx_stats->failed_pkts);
ath10k_update_per_peer_tx_stats(ar, sta, p_tx_stats);
}
out:
spin_unlock_bh(&ar->data_lock);
rcu_read_unlock();
}
ath10k: add per peer tx stats support for 10.2.4 10.2.4 firmware branch (used in QCA988X) does not support HTT_10_4_T2H_MSG_TYPE_PEER_STATS and that's why ath10k does not provide tranmission rate statistics to user space, instead it just shows hardcoded 6 Mbit/s. But pktlog firmware facility provides per peer tx statistics. The firmware sends one pktlog event for every four PPDUs per peer, which include: * successful number of packets and bytes transmitted * number of packets and bytes dropped * retried number of packets and bytes * rate info per ppdu Firmware supports WMI_SERVICE_PEER_STATS, pktlog is enabled through ATH10K_FLAG_PEER_STATS, which is nowadays enabled by default in ath10k. This patch does not impact throughput. Tested on QCA9880 with firmware version 10.2.4.70.48. This should also work with firmware branch 10.2.4-1.0-00029 Parse peer stats from pktlog packets and update the tx rate information per STA. This way user space can query about transmit rate with iw: $iw wlan0 station dump Station 3c:a9:f4:72:bb:a4 (on wlan1) inactive time: 8210 ms rx bytes: 9166 rx packets: 44 tx bytes: 1105 tx packets: 9 tx retries: 0 tx failed: 1 rx drop misc: 3 signal: -75 [-75, -87, -88] dBm signal avg: -75 [-75, -85, -88] dBm tx bitrate: 39.0 MBit/s MCS 10 rx bitrate: 26.0 MBit/s MCS 3 rx duration: 23250 us authorized: yes authenticated: yes associated: yes preamble: short WMM/WME: yes MFP: no TDLS peer: no DTIM period: 2 beacon interval:100 short preamble: yes short slot time:yes connected time: 22 seconds Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-05 20:31:25 +07:00
static void ath10k_fetch_10_2_tx_stats(struct ath10k *ar, u8 *data)
{
struct ath10k_pktlog_hdr *hdr = (struct ath10k_pktlog_hdr *)data;
struct ath10k_per_peer_tx_stats *p_tx_stats = &ar->peer_tx_stats;
struct ath10k_10_2_peer_tx_stats *tx_stats;
struct ieee80211_sta *sta;
struct ath10k_peer *peer;
u16 log_type = __le16_to_cpu(hdr->log_type);
u32 peer_id = 0, i;
if (log_type != ATH_PKTLOG_TYPE_TX_STAT)
return;
tx_stats = (struct ath10k_10_2_peer_tx_stats *)((hdr->payload) +
ATH10K_10_2_TX_STATS_OFFSET);
if (!tx_stats->tx_ppdu_cnt)
return;
peer_id = tx_stats->peer_id;
rcu_read_lock();
spin_lock_bh(&ar->data_lock);
peer = ath10k_peer_find_by_id(ar, peer_id);
if (!peer) {
ath10k_warn(ar, "Invalid peer id %d in peer stats buffer\n",
peer_id);
goto out;
}
sta = peer->sta;
for (i = 0; i < tx_stats->tx_ppdu_cnt; i++) {
p_tx_stats->succ_bytes =
__le16_to_cpu(tx_stats->success_bytes[i]);
p_tx_stats->retry_bytes =
__le16_to_cpu(tx_stats->retry_bytes[i]);
p_tx_stats->failed_bytes =
__le16_to_cpu(tx_stats->failed_bytes[i]);
p_tx_stats->ratecode = tx_stats->ratecode[i];
p_tx_stats->flags = tx_stats->flags[i];
p_tx_stats->succ_pkts = tx_stats->success_pkts[i];
p_tx_stats->retry_pkts = tx_stats->retry_pkts[i];
p_tx_stats->failed_pkts = tx_stats->failed_pkts[i];
ath10k_update_per_peer_tx_stats(ar, sta, p_tx_stats);
}
spin_unlock_bh(&ar->data_lock);
rcu_read_unlock();
return;
out:
spin_unlock_bh(&ar->data_lock);
rcu_read_unlock();
}
bool ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
{
struct ath10k_htt *htt = &ar->htt;
struct htt_resp *resp = (struct htt_resp *)skb->data;
enum htt_t2h_msg_type type;
/* confirm alignment */
if (!IS_ALIGNED((unsigned long)skb->data, 4))
ath10k_warn(ar, "unaligned htt message, expect trouble\n");
ath10k_dbg(ar, ATH10K_DBG_HTT, "htt rx, msg_type: 0x%0X\n",
resp->hdr.msg_type);
if (resp->hdr.msg_type >= ar->htt.t2h_msg_types_max) {
ath10k_dbg(ar, ATH10K_DBG_HTT, "htt rx, unsupported msg_type: 0x%0X\n max: 0x%0X",
resp->hdr.msg_type, ar->htt.t2h_msg_types_max);
return true;
}
type = ar->htt.t2h_msg_types[resp->hdr.msg_type];
switch (type) {
case HTT_T2H_MSG_TYPE_VERSION_CONF: {
htt->target_version_major = resp->ver_resp.major;
htt->target_version_minor = resp->ver_resp.minor;
complete(&htt->target_version_received);
break;
}
case HTT_T2H_MSG_TYPE_RX_IND:
ath10k_htt_rx_proc_rx_ind(htt, &resp->rx_ind);
break;
case HTT_T2H_MSG_TYPE_PEER_MAP: {
struct htt_peer_map_event ev = {
.vdev_id = resp->peer_map.vdev_id,
.peer_id = __le16_to_cpu(resp->peer_map.peer_id),
};
memcpy(ev.addr, resp->peer_map.addr, sizeof(ev.addr));
ath10k_peer_map_event(htt, &ev);
break;
}
case HTT_T2H_MSG_TYPE_PEER_UNMAP: {
struct htt_peer_unmap_event ev = {
.peer_id = __le16_to_cpu(resp->peer_unmap.peer_id),
};
ath10k_peer_unmap_event(htt, &ev);
break;
}
case HTT_T2H_MSG_TYPE_MGMT_TX_COMPLETION: {
struct htt_tx_done tx_done = {};
int status = __le32_to_cpu(resp->mgmt_tx_completion.status);
int info = __le32_to_cpu(resp->mgmt_tx_completion.info);
tx_done.msdu_id = __le32_to_cpu(resp->mgmt_tx_completion.desc_id);
switch (status) {
case HTT_MGMT_TX_STATUS_OK:
tx_done.status = HTT_TX_COMPL_STATE_ACK;
if (test_bit(WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
ar->wmi.svc_map) &&
(resp->mgmt_tx_completion.flags &
HTT_MGMT_TX_CMPL_FLAG_ACK_RSSI)) {
tx_done.ack_rssi =
FIELD_GET(HTT_MGMT_TX_CMPL_INFO_ACK_RSSI_MASK,
info);
}
break;
case HTT_MGMT_TX_STATUS_RETRY:
tx_done.status = HTT_TX_COMPL_STATE_NOACK;
break;
case HTT_MGMT_TX_STATUS_DROP:
tx_done.status = HTT_TX_COMPL_STATE_DISCARD;
break;
}
status = ath10k_txrx_tx_unref(htt, &tx_done);
if (!status) {
spin_lock_bh(&htt->tx_lock);
ath10k_htt_tx_mgmt_dec_pending(htt);
spin_unlock_bh(&htt->tx_lock);
}
break;
}
case HTT_T2H_MSG_TYPE_TX_COMPL_IND:
ath10k_htt_rx_tx_compl_ind(htt->ar, skb);
break;
case HTT_T2H_MSG_TYPE_SEC_IND: {
struct ath10k *ar = htt->ar;
struct htt_security_indication *ev = &resp->security_indication;
ath10k_dbg(ar, ATH10K_DBG_HTT,
"sec ind peer_id %d unicast %d type %d\n",
__le16_to_cpu(ev->peer_id),
!!(ev->flags & HTT_SECURITY_IS_UNICAST),
MS(ev->flags, HTT_SECURITY_TYPE));
complete(&ar->install_key_done);
break;
}
case HTT_T2H_MSG_TYPE_RX_FRAG_IND: {
ath10k_dbg_dump(ar, ATH10K_DBG_HTT_DUMP, NULL, "htt event: ",
skb->data, skb->len);
atomic_inc(&htt->num_mpdus_ready);
break;
}
case HTT_T2H_MSG_TYPE_TEST:
break;
case HTT_T2H_MSG_TYPE_STATS_CONF:
trace_ath10k_htt_stats(ar, skb->data, skb->len);
break;
case HTT_T2H_MSG_TYPE_TX_INSPECT_IND:
/* Firmware can return tx frames if it's unable to fully
* process them and suspects host may be able to fix it. ath10k
* sends all tx frames as already inspected so this shouldn't
* happen unless fw has a bug.
*/
ath10k_warn(ar, "received an unexpected htt tx inspect event\n");
break;
case HTT_T2H_MSG_TYPE_RX_ADDBA:
ath10k_htt_rx_addba(ar, resp);
break;
case HTT_T2H_MSG_TYPE_RX_DELBA:
ath10k_htt_rx_delba(ar, resp);
break;
case HTT_T2H_MSG_TYPE_PKTLOG: {
trace_ath10k_htt_pktlog(ar, resp->pktlog_msg.payload,
skb->len -
offsetof(struct htt_resp,
pktlog_msg.payload));
ath10k: add per peer tx stats support for 10.2.4 10.2.4 firmware branch (used in QCA988X) does not support HTT_10_4_T2H_MSG_TYPE_PEER_STATS and that's why ath10k does not provide tranmission rate statistics to user space, instead it just shows hardcoded 6 Mbit/s. But pktlog firmware facility provides per peer tx statistics. The firmware sends one pktlog event for every four PPDUs per peer, which include: * successful number of packets and bytes transmitted * number of packets and bytes dropped * retried number of packets and bytes * rate info per ppdu Firmware supports WMI_SERVICE_PEER_STATS, pktlog is enabled through ATH10K_FLAG_PEER_STATS, which is nowadays enabled by default in ath10k. This patch does not impact throughput. Tested on QCA9880 with firmware version 10.2.4.70.48. This should also work with firmware branch 10.2.4-1.0-00029 Parse peer stats from pktlog packets and update the tx rate information per STA. This way user space can query about transmit rate with iw: $iw wlan0 station dump Station 3c:a9:f4:72:bb:a4 (on wlan1) inactive time: 8210 ms rx bytes: 9166 rx packets: 44 tx bytes: 1105 tx packets: 9 tx retries: 0 tx failed: 1 rx drop misc: 3 signal: -75 [-75, -87, -88] dBm signal avg: -75 [-75, -85, -88] dBm tx bitrate: 39.0 MBit/s MCS 10 rx bitrate: 26.0 MBit/s MCS 3 rx duration: 23250 us authorized: yes authenticated: yes associated: yes preamble: short WMM/WME: yes MFP: no TDLS peer: no DTIM period: 2 beacon interval:100 short preamble: yes short slot time:yes connected time: 22 seconds Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-12-05 20:31:25 +07:00
if (ath10k_peer_stats_enabled(ar))
ath10k_fetch_10_2_tx_stats(ar,
resp->pktlog_msg.payload);
break;
}
case HTT_T2H_MSG_TYPE_RX_FLUSH: {
/* Ignore this event because mac80211 takes care of Rx
* aggregation reordering.
*/
break;
}
case HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND: {
__skb_queue_tail(&htt->rx_in_ord_compl_q, skb);
return false;
}
case HTT_T2H_MSG_TYPE_TX_CREDIT_UPDATE_IND:
break;
case HTT_T2H_MSG_TYPE_CHAN_CHANGE: {
u32 phymode = __le32_to_cpu(resp->chan_change.phymode);
u32 freq = __le32_to_cpu(resp->chan_change.freq);
ar->tgt_oper_chan = ieee80211_get_channel(ar->hw->wiphy, freq);
ath10k_dbg(ar, ATH10K_DBG_HTT,
"htt chan change freq %u phymode %s\n",
freq, ath10k_wmi_phymode_str(phymode));
break;
}
ath10k: enable raw encap mode and software crypto engine This patch enables raw Rx/Tx encap mode to support software based crypto engine. This patch introduces a new module param 'cryptmode'. cryptmode: 0: Use hardware crypto engine globally with native Wi-Fi mode TX/RX encapsulation to the firmware. This is the default mode. 1: Use sofware crypto engine globally with raw mode TX/RX encapsulation to the firmware. Known limitation: A-MSDU must be disabled for RAW Tx encap mode to perform well when heavy traffic is applied. Testing: (by Michal Kazior <michal.kazior@tieto.com>) a) Performance Testing cryptmode=1 ap=qca988x sta=killer1525 killer1525 -> qca988x 194.496 mbps [tcp1 ip4] killer1525 -> qca988x 238.309 mbps [tcp5 ip4] killer1525 -> qca988x 266.958 mbps [udp1 ip4] killer1525 -> qca988x 477.468 mbps [udp5 ip4] qca988x -> killer1525 301.378 mbps [tcp1 ip4] qca988x -> killer1525 297.949 mbps [tcp5 ip4] qca988x -> killer1525 331.351 mbps [udp1 ip4] qca988x -> killer1525 371.528 mbps [udp5 ip4] ap=killer1525 sta=qca988x qca988x -> killer1525 331.447 mbps [tcp1 ip4] qca988x -> killer1525 328.783 mbps [tcp5 ip4] qca988x -> killer1525 375.309 mbps [udp1 ip4] qca988x -> killer1525 403.379 mbps [udp5 ip4] killer1525 -> qca988x 203.689 mbps [tcp1 ip4] killer1525 -> qca988x 222.339 mbps [tcp5 ip4] killer1525 -> qca988x 264.199 mbps [udp1 ip4] killer1525 -> qca988x 479.371 mbps [udp5 ip4] Note: - only open network tested for RAW vs nwifi performance comparison - killer1525 (qca6174 hw2.2) is 2x2 device (hence max 866mbps) - used iperf - OTA, devices a few cm apart from each other, no shielding - tcpX/udpX, X - means number of threads used Overview: - relative Tx performance drop is seen but is within reasonable and expected threshold (A-MSDU must be disabled with RAW Tx) b) Connectivity Testing cryptmode=1 ap=iwl6205 sta1=qca988x crypto=open topology-1ap1sta OK ap=iwl6205 sta1=qca988x crypto=wep1 topology-1ap1sta OK ap=iwl6205 sta1=qca988x crypto=wpa topology-1ap1sta OK ap=iwl6205 sta1=qca988x crypto=wpa-ccmp topology-1ap1sta OK ap=qca988x sta1=iwl6205 crypto=open topology-1ap1sta OK ap=qca988x sta1=iwl6205 crypto=wep1 topology-1ap1sta OK ap=qca988x sta1=iwl6205 crypto=wpa topology-1ap1sta OK ap=qca988x sta1=iwl6205 crypto=wpa-ccmp topology-1ap1sta OK ap=iwl6205 sta1=qca988x crypto=open topology-1ap1sta2br OK ap=iwl6205 sta1=qca988x crypto=wep1 topology-1ap1sta2br OK ap=iwl6205 sta1=qca988x crypto=wpa topology-1ap1sta2br OK ap=iwl6205 sta1=qca988x crypto=wpa-ccmp topology-1ap1sta2br OK ap=qca988x sta1=iwl6205 crypto=open topology-1ap1sta2br OK ap=qca988x sta1=iwl6205 crypto=wep1 topology-1ap1sta2br OK ap=qca988x sta1=iwl6205 crypto=wpa topology-1ap1sta2br OK ap=qca988x sta1=iwl6205 crypto=wpa-ccmp topology-1ap1sta2br OK ap=iwl6205 sta1=qca988x crypto=open topology-1ap1sta2br1vlan OK ap=iwl6205 sta1=qca988x crypto=wep1 topology-1ap1sta2br1vlan OK ap=iwl6205 sta1=qca988x crypto=wpa topology-1ap1sta2br1vlan OK ap=iwl6205 sta1=qca988x crypto=wpa-ccmp topology-1ap1sta2br1vlan OK ap=qca988x sta1=iwl6205 crypto=open topology-1ap1sta2br1vlan OK ap=qca988x sta1=iwl6205 crypto=wep1 topology-1ap1sta2br1vlan OK ap=qca988x sta1=iwl6205 crypto=wpa topology-1ap1sta2br1vlan OK ap=qca988x sta1=iwl6205 crypto=wpa-ccmp topology-1ap1sta2br1vlan OK Note: - each test takes all possible endpoint pairs and pings - each pair-ping flushes arp table - ip6 is used c) Testbed Topology: 1ap1sta: [ap] ---- [sta] endpoints: ap, sta 1ap1sta2br: [veth0] [ap] ---- [sta] [veth2] | | | | [veth1] | \ [veth3] \ / \ / [br0] [br1] endpoints: veth0, veth2, br0, br1 note: STA works in 4addr mode, AP has wds_sta=1 1ap1sta2br1vlan: [veth0] [ap] ---- [sta] [veth2] | | | | [veth1] | \ [veth3] \ / \ / [br0] [br1] | | [vlan0_id2] [vlan1_id2] endpoints: vlan0_id2, vlan1_id2 note: STA works in 4addr mode, AP has wds_sta=1 Credits: Thanks to Michal Kazior <michal.kazior@tieto.com> who helped find the amsdu issue, contributed a workaround (already squashed into this patch), and contributed the throughput and connectivity tests results. Signed-off-by: David Liu <cfliu.tw@gmail.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Tested-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-25 00:25:32 +07:00
case HTT_T2H_MSG_TYPE_AGGR_CONF:
break;
case HTT_T2H_MSG_TYPE_TX_FETCH_IND: {
struct sk_buff *tx_fetch_ind = skb_copy(skb, GFP_ATOMIC);
if (!tx_fetch_ind) {
ath10k_warn(ar, "failed to copy htt tx fetch ind\n");
break;
}
skb_queue_tail(&htt->tx_fetch_ind_q, tx_fetch_ind);
break;
}
case HTT_T2H_MSG_TYPE_TX_FETCH_CONFIRM:
ath10k_htt_rx_tx_fetch_confirm(ar, skb);
break;
case HTT_T2H_MSG_TYPE_TX_MODE_SWITCH_IND:
ath10k_htt_rx_tx_mode_switch_ind(ar, skb);
break;
case HTT_T2H_MSG_TYPE_PEER_STATS:
ath10k_htt_fetch_peer_stats(ar, skb);
break;
case HTT_T2H_MSG_TYPE_EN_STATS:
default:
ath10k_warn(ar, "htt event (%d) not handled\n",
resp->hdr.msg_type);
ath10k_dbg_dump(ar, ATH10K_DBG_HTT_DUMP, NULL, "htt event: ",
skb->data, skb->len);
break;
}
return true;
}
EXPORT_SYMBOL(ath10k_htt_t2h_msg_handler);
void ath10k_htt_rx_pktlog_completion_handler(struct ath10k *ar,
struct sk_buff *skb)
{
trace_ath10k_htt_pktlog(ar, skb->data, skb->len);
dev_kfree_skb_any(skb);
}
EXPORT_SYMBOL(ath10k_htt_rx_pktlog_completion_handler);
static int ath10k_htt_rx_deliver_msdu(struct ath10k *ar, int quota, int budget)
{
struct sk_buff *skb;
while (quota < budget) {
if (skb_queue_empty(&ar->htt.rx_msdus_q))
break;
skb = __skb_dequeue(&ar->htt.rx_msdus_q);
if (!skb)
break;
ath10k_process_rx(ar, skb);
quota++;
}
return quota;
}
int ath10k_htt_txrx_compl_task(struct ath10k *ar, int budget)
{
struct ath10k_htt *htt = &ar->htt;
struct htt_tx_done tx_done = {};
struct sk_buff_head tx_ind_q;
struct sk_buff *skb;
unsigned long flags;
int quota = 0, done, ret;
bool resched_napi = false;
__skb_queue_head_init(&tx_ind_q);
/* Process pending frames before dequeuing more data
* from hardware.
*/
quota = ath10k_htt_rx_deliver_msdu(ar, quota, budget);
if (quota == budget) {
resched_napi = true;
goto exit;
}
while ((skb = __skb_dequeue(&htt->rx_in_ord_compl_q))) {
spin_lock_bh(&htt->rx_ring.lock);
ret = ath10k_htt_rx_in_ord_ind(ar, skb);
spin_unlock_bh(&htt->rx_ring.lock);
dev_kfree_skb_any(skb);
if (ret == -EIO) {
resched_napi = true;
goto exit;
}
}
while (atomic_read(&htt->num_mpdus_ready)) {
ret = ath10k_htt_rx_handle_amsdu(htt);
if (ret == -EIO) {
resched_napi = true;
goto exit;
}
atomic_dec(&htt->num_mpdus_ready);
}
/* Deliver received data after processing data from hardware */
quota = ath10k_htt_rx_deliver_msdu(ar, quota, budget);
/* From NAPI documentation:
* The napi poll() function may also process TX completions, in which
* case if it processes the entire TX ring then it should count that
* work as the rest of the budget.
*/
if ((quota < budget) && !kfifo_is_empty(&htt->txdone_fifo))
quota = budget;
/* kfifo_get: called only within txrx_tasklet so it's neatly serialized.
* From kfifo_get() documentation:
* Note that with only one concurrent reader and one concurrent writer,
* you don't need extra locking to use these macro.
*/
while (kfifo_get(&htt->txdone_fifo, &tx_done))
ath10k_txrx_tx_unref(htt, &tx_done);
ath10k_mac_tx_push_pending(ar);
spin_lock_irqsave(&htt->tx_fetch_ind_q.lock, flags);
skb_queue_splice_init(&htt->tx_fetch_ind_q, &tx_ind_q);
spin_unlock_irqrestore(&htt->tx_fetch_ind_q.lock, flags);
while ((skb = __skb_dequeue(&tx_ind_q))) {
ath10k_htt_rx_tx_fetch_ind(ar, skb);
dev_kfree_skb_any(skb);
}
exit:
ath10k_htt_rx_msdu_buff_replenish(htt);
/* In case of rx failure or more data to read, report budget
* to reschedule NAPI poll
*/
done = resched_napi ? budget : quota;
return done;
}
EXPORT_SYMBOL(ath10k_htt_txrx_compl_task);
static const struct ath10k_htt_rx_ops htt_rx_ops_32 = {
.htt_get_rx_ring_size = ath10k_htt_get_rx_ring_size_32,
.htt_config_paddrs_ring = ath10k_htt_config_paddrs_ring_32,
.htt_set_paddrs_ring = ath10k_htt_set_paddrs_ring_32,
.htt_get_vaddr_ring = ath10k_htt_get_vaddr_ring_32,
.htt_reset_paddrs_ring = ath10k_htt_reset_paddrs_ring_32,
};
static const struct ath10k_htt_rx_ops htt_rx_ops_64 = {
.htt_get_rx_ring_size = ath10k_htt_get_rx_ring_size_64,
.htt_config_paddrs_ring = ath10k_htt_config_paddrs_ring_64,
.htt_set_paddrs_ring = ath10k_htt_set_paddrs_ring_64,
.htt_get_vaddr_ring = ath10k_htt_get_vaddr_ring_64,
.htt_reset_paddrs_ring = ath10k_htt_reset_paddrs_ring_64,
};
void ath10k_htt_set_rx_ops(struct ath10k_htt *htt)
{
struct ath10k *ar = htt->ar;
if (ar->hw_params.target_64bit)
htt->rx_ops = &htt_rx_ops_64;
else
htt->rx_ops = &htt_rx_ops_32;
}