License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 21:07:57 +07:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0 */
|
2007-07-19 15:49:33 +07:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* edac_module.h
|
|
|
|
|
*
|
|
|
|
|
* For defining functions/data for within the EDAC_CORE module only
|
|
|
|
|
*
|
|
|
|
|
* written by doug thompson <norsk5@xmission.h>
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#ifndef __EDAC_MODULE_H__
|
|
|
|
|
#define __EDAC_MODULE_H__
|
|
|
|
|
|
2016-10-30 00:16:34 +07:00
|
|
|
#include "edac_mc.h"
|
|
|
|
|
#include "edac_pci.h"
|
|
|
|
|
#include "edac_device.h"
|
2007-07-19 15:49:33 +07:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* INTERNAL EDAC MODULE:
|
|
|
|
|
* EDAC memory controller sysfs create/remove functions
|
|
|
|
|
* and setup/teardown functions
|
2007-07-19 15:50:27 +07:00
|
|
|
*
|
|
|
|
|
* edac_mc objects
|
2007-07-19 15:49:33 +07:00
|
|
|
*/
|
edac: rewrite the sysfs code to use struct device
The EDAC subsystem uses the old struct sysdev approach,
creating all nodes using the raw sysfs API. This is bad,
as the API is deprecated.
As we'll be changing the EDAC API, let's first port the existing
code to struct device.
There's one drawback on this patch: driver-specific sysfs
nodes, used by mpc85xx_edac, amd64_edac and i7core_edac
won't be created anymore. While it would be possible to
also port the device-specific code, that would mix kobj with
struct device, with is not recommended. Also, it is easier and nicer
to move the code to the drivers, instead, as the core can get rid
of some complex logic that just emulates what the device_add()
and device_create_file() already does.
The next patches will convert the driver-specific code to use
the device-specific calls. Then, the remaining bits of the old
sysfs API will be removed.
NOTE: a per-MC bus is required, otherwise devices with more than
one memory controller will hit a bug like the one below:
[ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev()
[ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1
[ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1
[ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0
[ 819.094984] ------------[ cut here ]------------
[ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0()
[ 819.107282] Hardware name: S2600CP
[ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0'
[ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan]
[ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1
[ 819.184113] Call Trace:
[ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0
[ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50
[ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0
[ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220
[ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20
[ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20
[ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0
[ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460
[ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core]
[ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core]
[ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core]
[ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac]
[ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac]
[ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90
[ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0
[ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100
[ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60
[ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270
[ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0
[ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0
[ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0
[ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90
[ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20
[ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0
[ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff
[ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140
[ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53
[ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff
[ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0
[ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac]
[ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170
[ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230
[ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b
[ 819.404633] ---[ end trace 1654fdd39556689f ]---
This happens because the bus is not being properly initialized.
Instead of putting the memory sub-devices inside the memory controller,
it is putting everything under the same directory:
$ tree /sys/bus/edac/
/sys/bus/edac/
├── devices
│ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts
│ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0
│ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1
│ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2
│ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0
│ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1
│ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3
│ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6
│ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch
│ ├── mc -> ../../../devices/system/edac/mc
│ └── mc0 -> ../../../devices/system/edac/mc/mc0
├── drivers
├── drivers_autoprobe
├── drivers_probe
└── uevent
On a multi-memory controller system, the names "csrow%d" and "dimm%d"
should be under "mc%d", and not at the main hierarchy level.
So, we need to create a per-MC bus, in order to have its own namespace.
Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Greg K H <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-17 02:41:11 +07:00
|
|
|
/* on edac_mc_sysfs.c */
|
|
|
|
|
int edac_mc_sysfs_init(void);
|
|
|
|
|
void edac_mc_sysfs_exit(void);
|
2015-02-04 17:48:52 +07:00
|
|
|
extern int edac_create_sysfs_mci_device(struct mem_ctl_info *mci,
|
|
|
|
|
const struct attribute_group **groups);
|
2007-07-19 15:49:33 +07:00
|
|
|
extern void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci);
|
|
|
|
|
extern int edac_get_log_ue(void);
|
|
|
|
|
extern int edac_get_log_ce(void);
|
|
|
|
|
extern int edac_get_panic_on_ue(void);
|
2007-07-19 15:49:54 +07:00
|
|
|
extern int edac_mc_get_log_ue(void);
|
|
|
|
|
extern int edac_mc_get_log_ce(void);
|
|
|
|
|
extern int edac_mc_get_panic_on_ue(void);
|
2007-07-19 15:49:33 +07:00
|
|
|
extern int edac_get_poll_msec(void);
|
2019-06-26 12:40:11 +07:00
|
|
|
extern unsigned int edac_mc_get_poll_msec(void);
|
2007-07-19 15:49:33 +07:00
|
|
|
|
2012-04-30 20:24:43 +07:00
|
|
|
unsigned edac_dimm_info_location(struct dimm_info *dimm, char *buf,
|
|
|
|
|
unsigned len);
|
|
|
|
|
|
edac: rewrite the sysfs code to use struct device
The EDAC subsystem uses the old struct sysdev approach,
creating all nodes using the raw sysfs API. This is bad,
as the API is deprecated.
As we'll be changing the EDAC API, let's first port the existing
code to struct device.
There's one drawback on this patch: driver-specific sysfs
nodes, used by mpc85xx_edac, amd64_edac and i7core_edac
won't be created anymore. While it would be possible to
also port the device-specific code, that would mix kobj with
struct device, with is not recommended. Also, it is easier and nicer
to move the code to the drivers, instead, as the core can get rid
of some complex logic that just emulates what the device_add()
and device_create_file() already does.
The next patches will convert the driver-specific code to use
the device-specific calls. Then, the remaining bits of the old
sysfs API will be removed.
NOTE: a per-MC bus is required, otherwise devices with more than
one memory controller will hit a bug like the one below:
[ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev()
[ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1
[ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1
[ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0
[ 819.094984] ------------[ cut here ]------------
[ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0()
[ 819.107282] Hardware name: S2600CP
[ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0'
[ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan]
[ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1
[ 819.184113] Call Trace:
[ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0
[ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50
[ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0
[ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220
[ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20
[ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20
[ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0
[ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460
[ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core]
[ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core]
[ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core]
[ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac]
[ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac]
[ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90
[ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0
[ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100
[ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60
[ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270
[ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0
[ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0
[ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0
[ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90
[ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20
[ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0
[ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff
[ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140
[ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53
[ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff
[ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0
[ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac]
[ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170
[ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230
[ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b
[ 819.404633] ---[ end trace 1654fdd39556689f ]---
This happens because the bus is not being properly initialized.
Instead of putting the memory sub-devices inside the memory controller,
it is putting everything under the same directory:
$ tree /sys/bus/edac/
/sys/bus/edac/
├── devices
│ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts
│ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0
│ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1
│ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2
│ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0
│ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1
│ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3
│ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6
│ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch
│ ├── mc -> ../../../devices/system/edac/mc
│ └── mc0 -> ../../../devices/system/edac/mc/mc0
├── drivers
├── drivers_autoprobe
├── drivers_probe
└── uevent
On a multi-memory controller system, the names "csrow%d" and "dimm%d"
should be under "mc%d", and not at the main hierarchy level.
So, we need to create a per-MC bus, in order to have its own namespace.
Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Greg K H <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-17 02:41:11 +07:00
|
|
|
/* on edac_device.c */
|
2007-07-19 15:50:29 +07:00
|
|
|
extern int edac_device_register_sysfs_main_kobj(
|
|
|
|
|
struct edac_device_ctl_info *edac_dev);
|
|
|
|
|
extern void edac_device_unregister_sysfs_main_kobj(
|
|
|
|
|
struct edac_device_ctl_info *edac_dev);
|
2007-07-19 15:49:33 +07:00
|
|
|
extern int edac_device_create_sysfs(struct edac_device_ctl_info *edac_dev);
|
|
|
|
|
extern void edac_device_remove_sysfs(struct edac_device_ctl_info *edac_dev);
|
|
|
|
|
|
2007-07-19 15:49:36 +07:00
|
|
|
/* edac core workqueue: single CPU mode */
|
2015-12-01 01:02:01 +07:00
|
|
|
int edac_workqueue_setup(void);
|
|
|
|
|
void edac_workqueue_teardown(void);
|
|
|
|
|
bool edac_queue_work(struct delayed_work *work, unsigned long delay);
|
|
|
|
|
bool edac_stop_work(struct delayed_work *work);
|
|
|
|
|
bool edac_mod_work(struct delayed_work *work, unsigned long delay);
|
|
|
|
|
|
2007-07-19 15:49:58 +07:00
|
|
|
extern void edac_device_reset_delay_period(struct edac_device_ctl_info
|
|
|
|
|
*edac_dev, unsigned long value);
|
2014-02-04 03:05:13 +07:00
|
|
|
extern void edac_mc_reset_delay_period(unsigned long value);
|
2007-07-27 00:41:14 +07:00
|
|
|
|
2012-04-16 20:18:12 +07:00
|
|
|
extern void *edac_align_ptr(void **p, unsigned size, int n_elems);
|
2007-07-19 15:49:33 +07:00
|
|
|
|
2012-06-12 09:32:12 +07:00
|
|
|
/*
|
|
|
|
|
* EDAC debugfs functions
|
|
|
|
|
*/
|
2015-09-22 17:16:05 +07:00
|
|
|
|
|
|
|
|
#define edac_debugfs_remove_recursive debugfs_remove_recursive
|
|
|
|
|
#define edac_debugfs_remove debugfs_remove
|
2012-06-12 09:32:12 +07:00
|
|
|
#ifdef CONFIG_EDAC_DEBUG
|
2019-01-22 22:21:16 +07:00
|
|
|
void edac_debugfs_init(void);
|
2012-06-12 09:32:12 +07:00
|
|
|
void edac_debugfs_exit(void);
|
2019-01-22 22:21:16 +07:00
|
|
|
void edac_create_debugfs_nodes(struct mem_ctl_info *mci);
|
2015-09-22 17:16:05 +07:00
|
|
|
struct dentry *edac_debugfs_create_dir(const char *dirname);
|
|
|
|
|
struct dentry *
|
|
|
|
|
edac_debugfs_create_dir_at(const char *dirname, struct dentry *parent);
|
|
|
|
|
struct dentry *
|
|
|
|
|
edac_debugfs_create_file(const char *name, umode_t mode, struct dentry *parent,
|
|
|
|
|
void *data, const struct file_operations *fops);
|
2019-06-12 00:54:33 +07:00
|
|
|
void edac_debugfs_create_x8(const char *name, umode_t mode,
|
|
|
|
|
struct dentry *parent, u8 *value);
|
|
|
|
|
void edac_debugfs_create_x16(const char *name, umode_t mode,
|
|
|
|
|
struct dentry *parent, u16 *value);
|
2019-07-12 11:46:56 +07:00
|
|
|
void edac_debugfs_create_x32(const char *name, umode_t mode,
|
|
|
|
|
struct dentry *parent, u32 *value);
|
2012-06-12 09:32:12 +07:00
|
|
|
#else
|
2019-01-22 22:21:16 +07:00
|
|
|
static inline void edac_debugfs_init(void) { }
|
2015-09-22 17:16:05 +07:00
|
|
|
static inline void edac_debugfs_exit(void) { }
|
2019-01-22 22:21:16 +07:00
|
|
|
static inline void edac_create_debugfs_nodes(struct mem_ctl_info *mci) { }
|
2015-09-22 17:16:05 +07:00
|
|
|
static inline struct dentry *edac_debugfs_create_dir(const char *dirname) { return NULL; }
|
|
|
|
|
static inline struct dentry *
|
|
|
|
|
edac_debugfs_create_dir_at(const char *dirname, struct dentry *parent) { return NULL; }
|
|
|
|
|
static inline struct dentry *
|
|
|
|
|
edac_debugfs_create_file(const char *name, umode_t mode, struct dentry *parent,
|
|
|
|
|
void *data, const struct file_operations *fops) { return NULL; }
|
2019-06-12 00:54:33 +07:00
|
|
|
static inline void edac_debugfs_create_x8(const char *name, umode_t mode,
|
|
|
|
|
struct dentry *parent, u8 *value) { }
|
|
|
|
|
static inline void edac_debugfs_create_x16(const char *name, umode_t mode,
|
|
|
|
|
struct dentry *parent, u16 *value) { }
|
2019-07-12 11:46:56 +07:00
|
|
|
static inline void edac_debugfs_create_x32(const char *name, umode_t mode,
|
|
|
|
|
struct dentry *parent, u32 *value) { }
|
2012-06-12 09:32:12 +07:00
|
|
|
#endif
|
|
|
|
|
|
2007-07-19 15:49:33 +07:00
|
|
|
/*
|
|
|
|
|
* EDAC PCI functions
|
|
|
|
|
*/
|
|
|
|
|
#ifdef CONFIG_PCI
|
|
|
|
|
extern void edac_pci_do_parity_check(void);
|
|
|
|
|
extern void edac_pci_clear_parity_errors(void);
|
|
|
|
|
extern int edac_sysfs_pci_setup(void);
|
|
|
|
|
extern void edac_sysfs_pci_teardown(void);
|
2007-07-19 15:49:54 +07:00
|
|
|
extern int edac_pci_get_check_errors(void);
|
|
|
|
|
extern int edac_pci_get_poll_msec(void);
|
2007-07-27 00:41:15 +07:00
|
|
|
extern void edac_pci_remove_sysfs(struct edac_pci_ctl_info *pci);
|
|
|
|
|
extern void edac_pci_handle_pe(struct edac_pci_ctl_info *pci, const char *msg);
|
|
|
|
|
extern void edac_pci_handle_npe(struct edac_pci_ctl_info *pci,
|
|
|
|
|
const char *msg);
|
2007-07-19 15:49:58 +07:00
|
|
|
#else /* CONFIG_PCI */
|
2007-07-19 15:49:33 +07:00
|
|
|
/* pre-process these away */
|
|
|
|
|
#define edac_pci_do_parity_check()
|
|
|
|
|
#define edac_pci_clear_parity_errors()
|
|
|
|
|
#define edac_sysfs_pci_setup() (0)
|
|
|
|
|
#define edac_sysfs_pci_teardown()
|
2007-07-19 15:49:54 +07:00
|
|
|
#define edac_pci_get_check_errors()
|
|
|
|
|
#define edac_pci_get_poll_msec()
|
2007-07-27 00:41:15 +07:00
|
|
|
#define edac_pci_handle_pe()
|
|
|
|
|
#define edac_pci_handle_npe()
|
2007-07-19 15:49:58 +07:00
|
|
|
#endif /* CONFIG_PCI */
|
2007-07-19 15:49:33 +07:00
|
|
|
|
2007-07-19 15:49:58 +07:00
|
|
|
#endif /* __EDAC_MODULE_H__ */
|