linux_dsm_epyc7002/include/linux/smp.h

188 lines
4.7 KiB
C
Raw Normal View History

#ifndef __LINUX_SMP_H
#define __LINUX_SMP_H
/*
* Generic SMP support
* Alan Cox. <alan@redhat.com>
*/
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/list.h>
#include <linux/cpumask.h>
extern void cpu_idle(void);
struct call_single_data {
struct list_head list;
void (*func) (void *info);
void *info;
u16 flags;
u16 priv;
};
cpumask: add sysfs displays for configured and disabled cpu maps Impact: add new sysfs files. Add sysfs files "kernel_max" and "offline" to display the max CPU index allowed (NR_CPUS-1), and the map of cpus that are offline. Cpus can be offlined via HOTPLUG, disabled by the BIOS ACPI tables, or if they exceed the number of cpus allowed by the NR_CPUS config option, or the "maxcpus=NUM" kernel start parameter. The "possible_cpus=NUM" parameter can also extend the number of possible cpus allowed, in which case the cpus not present at startup will be in the offline state. (These cpus can be HOTPLUGGED ON after system startup [pending a follow-on patch to provide the capability via the /sys/devices/sys/cpu/cpuN/online mechanism to bring them online.]) By design, the "offlined cpus > possible cpus" display will always use the following formats: * all possible cpus online: "x$" or "x-y$" * some possible cpus offline: ".*,x$" or ".*,x-y$" where: x == number of possible cpus (nr_cpu_ids); and y == number of cpus >= NR_CPUS or maxcpus (if y > x). One use of this feature is for distros to select (or configure) the appropriate kernel to install for the resident system. Notes: * cpus offlined <= possible cpus will be printed for all architectures. * cpus offlined > possible cpus will only be printed for arches that set 'total_cpus' [X86 only in this patch]. Based on tip/cpus4096 + .../rusty/linux-2.6-for-ingo.git/master + x86-only-patches sent 12/15. Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-12-16 11:26:48 +07:00
/* total number of cpus in this system (may exceed NR_CPUS) */
extern unsigned int total_cpus;
int smp_call_function_single(int cpuid, void (*func) (void *info), void *info,
int wait);
#ifdef CONFIG_SMP
#include <linux/preempt.h>
#include <linux/kernel.h>
#include <linux/compiler.h>
#include <linux/thread_info.h>
#include <asm/smp.h>
/*
* main cross-CPU interfaces, handles INIT, TLB flush, STOP, etc.
* (defined in asm header):
*/
/*
* stops all CPUs but the current one:
*/
extern void smp_send_stop(void);
/*
* sends a 'reschedule' event to another CPU:
*/
extern void smp_send_reschedule(int cpu);
/*
* Prepare machine for booting other CPUs.
*/
extern void smp_prepare_cpus(unsigned int max_cpus);
/*
* Bring a CPU up
*/
extern int __cpu_up(unsigned int cpunum);
/*
* Final polishing of CPUs
*/
extern void smp_cpus_done(unsigned int max_cpus);
/*
* Call a function on all other processors
*/
int smp_call_function(void(*func)(void *info), void *info, int wait);
void smp_call_function_many(const struct cpumask *mask,
void (*func)(void *info), void *info, bool wait);
void __smp_call_function_single(int cpuid, struct call_single_data *data,
int wait);
int smp_call_function_any(const struct cpumask *mask,
void (*func)(void *info), void *info, int wait);
/*
* Generic and arch helpers
*/
#ifdef CONFIG_USE_GENERIC_SMP_HELPERS
void generic_smp_call_function_single_interrupt(void);
void generic_smp_call_function_interrupt(void);
void ipi_call_lock(void);
void ipi_call_unlock(void);
void ipi_call_lock_irq(void);
void ipi_call_unlock_irq(void);
#endif
/*
* Call a function on all processors
*/
int on_each_cpu(void (*func) (void *info), void *info, int wait);
#define MSG_ALL_BUT_SELF 0x8000 /* Assume <32768 CPU's */
#define MSG_ALL 0x8001
#define MSG_INVALIDATE_TLB 0x0001 /* Remote processor TLB invalidate */
#define MSG_STOP_CPU 0x0002 /* Sent to shut down slave CPU's
* when rebooting
*/
#define MSG_RESCHEDULE 0x0003 /* Reschedule request from master CPU*/
#define MSG_CALL_FUNCTION 0x0004 /* Call function on all other CPUs */
/*
* Mark the boot cpu "online" so that it can call console drivers in
* printk() and can access its per-cpu storage.
*/
void smp_prepare_boot_cpu(void);
extern unsigned int setup_max_cpus;
#else /* !SMP */
static inline void smp_send_stop(void) { }
/*
* These macros fold the SMP functionality into a single CPU system
*/
#define raw_smp_processor_id() 0
static inline int up_smp_call_function(void (*func)(void *), void *info)
{
return 0;
}
#define smp_call_function(func, info, wait) \
(up_smp_call_function(func, info))
#define on_each_cpu(func,info,wait) \
({ \
local_irq_disable(); \
func(info); \
local_irq_enable(); \
0; \
})
static inline void smp_send_reschedule(int cpu) { }
#define num_booting_cpus() 1
#define smp_prepare_boot_cpu() do {} while (0)
#define smp_call_function_many(mask, func, info, wait) \
(up_smp_call_function(func, info))
static inline void init_call_single_data(void) { }
static inline int
smp_call_function_any(const struct cpumask *mask, void (*func)(void *info),
void *info, int wait)
{
return smp_call_function_single(0, func, info, wait);
}
#endif /* !SMP */
/*
* smp_processor_id(): get the current CPU ID.
*
* if DEBUG_PREEMPT is enabled the we check whether it is
* used in a preemption-safe way. (smp_processor_id() is safe
* if it's used in a preemption-off critical section, or in
* a thread that is bound to the current CPU.)
*
* NOTE: raw_smp_processor_id() is for internal use only
* (smp_processor_id() is the preferred variant), but in rare
* instances it might also be used to turn off false positives
* (i.e. smp_processor_id() use that the debugging code reports but
* which use for some reason is legal). Don't use this to hack around
* the warning message, as your code might not work under PREEMPT.
*/
#ifdef CONFIG_DEBUG_PREEMPT
extern unsigned int debug_smp_processor_id(void);
# define smp_processor_id() debug_smp_processor_id()
#else
# define smp_processor_id() raw_smp_processor_id()
#endif
#define get_cpu() ({ preempt_disable(); smp_processor_id(); })
#define put_cpu() preempt_enable()
/*
* Callback to arch code if there's nosmp or maxcpus=0 on the
* boot command line:
*/
extern void arch_disable_smp_support(void);
void smp_setup_processor_id(void);
#endif /* __LINUX_SMP_H */