btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
/*
|
|
|
|
* Copyright (C) 2011 STRATO. All rights reserved.
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU General Public
|
|
|
|
* License v2 as published by the Free Software Foundation.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
|
|
* General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public
|
|
|
|
* License along with this program; if not, write to the
|
|
|
|
* Free Software Foundation, Inc., 59 Temple Place - Suite 330,
|
|
|
|
* Boston, MA 021110-1307, USA.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/sched.h>
|
|
|
|
#include <linux/pagemap.h>
|
|
|
|
#include <linux/writeback.h>
|
|
|
|
#include <linux/blkdev.h>
|
|
|
|
#include <linux/rbtree.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/workqueue.h>
|
|
|
|
#include "ctree.h"
|
|
|
|
#include "volumes.h"
|
|
|
|
#include "disk-io.h"
|
|
|
|
#include "transaction.h"
|
2012-11-06 19:15:27 +07:00
|
|
|
#include "dev-replace.h"
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
|
|
|
|
#undef DEBUG
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This is the implementation for the generic read ahead framework.
|
|
|
|
*
|
|
|
|
* To trigger a readahead, btrfs_reada_add must be called. It will start
|
|
|
|
* a read ahead for the given range [start, end) on tree root. The returned
|
|
|
|
* handle can either be used to wait on the readahead to finish
|
|
|
|
* (btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
|
|
|
|
*
|
|
|
|
* The read ahead works as follows:
|
|
|
|
* On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
|
|
|
|
* reada_start_machine will then search for extents to prefetch and trigger
|
|
|
|
* some reads. When a read finishes for a node, all contained node/leaf
|
|
|
|
* pointers that lie in the given range will also be enqueued. The reads will
|
|
|
|
* be triggered in sequential order, thus giving a big win over a naive
|
|
|
|
* enumeration. It will also make use of multi-device layouts. Each disk
|
|
|
|
* will have its on read pointer and all disks will by utilized in parallel.
|
|
|
|
* Also will no two disks read both sides of a mirror simultaneously, as this
|
|
|
|
* would waste seeking capacity. Instead both disks will read different parts
|
|
|
|
* of the filesystem.
|
|
|
|
* Any number of readaheads can be started in parallel. The read order will be
|
|
|
|
* determined globally, i.e. 2 parallel readaheads will normally finish faster
|
|
|
|
* than the 2 started one after another.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define MAX_IN_FLIGHT 6
|
|
|
|
|
|
|
|
struct reada_extctl {
|
|
|
|
struct list_head list;
|
|
|
|
struct reada_control *rc;
|
|
|
|
u64 generation;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct reada_extent {
|
|
|
|
u64 logical;
|
|
|
|
struct btrfs_key top;
|
|
|
|
int err;
|
|
|
|
struct list_head extctl;
|
2012-08-30 03:31:33 +07:00
|
|
|
int refcnt;
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
spinlock_t lock;
|
2012-03-28 01:21:26 +07:00
|
|
|
struct reada_zone *zones[BTRFS_MAX_MIRRORS];
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
int nzones;
|
|
|
|
struct btrfs_device *scheduled_for;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct reada_zone {
|
|
|
|
u64 start;
|
|
|
|
u64 end;
|
|
|
|
u64 elems;
|
|
|
|
struct list_head list;
|
|
|
|
spinlock_t lock;
|
|
|
|
int locked;
|
|
|
|
struct btrfs_device *device;
|
2012-03-28 01:21:26 +07:00
|
|
|
struct btrfs_device *devs[BTRFS_MAX_MIRRORS]; /* full list, incl
|
|
|
|
* self */
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
int ndevs;
|
|
|
|
struct kref refcnt;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct reada_machine_work {
|
2014-02-28 09:46:19 +07:00
|
|
|
struct btrfs_work work;
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
struct btrfs_fs_info *fs_info;
|
|
|
|
};
|
|
|
|
|
|
|
|
static void reada_extent_put(struct btrfs_fs_info *, struct reada_extent *);
|
|
|
|
static void reada_control_release(struct kref *kref);
|
|
|
|
static void reada_zone_release(struct kref *kref);
|
|
|
|
static void reada_start_machine(struct btrfs_fs_info *fs_info);
|
|
|
|
static void __reada_start_machine(struct btrfs_fs_info *fs_info);
|
|
|
|
|
|
|
|
static int reada_add_block(struct reada_control *rc, u64 logical,
|
|
|
|
struct btrfs_key *top, int level, u64 generation);
|
|
|
|
|
|
|
|
/* recurses */
|
|
|
|
/* in case of err, eb might be NULL */
|
|
|
|
static int __readahead_hook(struct btrfs_root *root, struct extent_buffer *eb,
|
|
|
|
u64 start, int err)
|
|
|
|
{
|
|
|
|
int level = 0;
|
|
|
|
int nritems;
|
|
|
|
int i;
|
|
|
|
u64 bytenr;
|
|
|
|
u64 generation;
|
|
|
|
struct reada_extent *re;
|
|
|
|
struct btrfs_fs_info *fs_info = root->fs_info;
|
|
|
|
struct list_head list;
|
|
|
|
unsigned long index = start >> PAGE_CACHE_SHIFT;
|
|
|
|
struct btrfs_device *for_dev;
|
|
|
|
|
|
|
|
if (eb)
|
|
|
|
level = btrfs_header_level(eb);
|
|
|
|
|
|
|
|
/* find extent */
|
|
|
|
spin_lock(&fs_info->reada_lock);
|
|
|
|
re = radix_tree_lookup(&fs_info->reada_tree, index);
|
|
|
|
if (re)
|
2012-08-30 03:31:33 +07:00
|
|
|
re->refcnt++;
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
spin_unlock(&fs_info->reada_lock);
|
|
|
|
|
|
|
|
if (!re)
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
spin_lock(&re->lock);
|
|
|
|
/*
|
|
|
|
* just take the full list from the extent. afterwards we
|
|
|
|
* don't need the lock anymore
|
|
|
|
*/
|
|
|
|
list_replace_init(&re->extctl, &list);
|
|
|
|
for_dev = re->scheduled_for;
|
|
|
|
re->scheduled_for = NULL;
|
|
|
|
spin_unlock(&re->lock);
|
|
|
|
|
|
|
|
if (err == 0) {
|
|
|
|
nritems = level ? btrfs_header_nritems(eb) : 0;
|
|
|
|
generation = btrfs_header_generation(eb);
|
|
|
|
/*
|
|
|
|
* FIXME: currently we just set nritems to 0 if this is a leaf,
|
|
|
|
* effectively ignoring the content. In a next step we could
|
|
|
|
* trigger more readahead depending from the content, e.g.
|
|
|
|
* fetch the checksums for the extents in the leaf.
|
|
|
|
*/
|
|
|
|
} else {
|
|
|
|
/*
|
|
|
|
* this is the error case, the extent buffer has not been
|
|
|
|
* read correctly. We won't access anything from it and
|
|
|
|
* just cleanup our data structures. Effectively this will
|
|
|
|
* cut the branch below this node from read ahead.
|
|
|
|
*/
|
|
|
|
nritems = 0;
|
|
|
|
generation = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < nritems; i++) {
|
|
|
|
struct reada_extctl *rec;
|
|
|
|
u64 n_gen;
|
|
|
|
struct btrfs_key key;
|
|
|
|
struct btrfs_key next_key;
|
|
|
|
|
|
|
|
btrfs_node_key_to_cpu(eb, &key, i);
|
|
|
|
if (i + 1 < nritems)
|
|
|
|
btrfs_node_key_to_cpu(eb, &next_key, i + 1);
|
|
|
|
else
|
|
|
|
next_key = re->top;
|
|
|
|
bytenr = btrfs_node_blockptr(eb, i);
|
|
|
|
n_gen = btrfs_node_ptr_generation(eb, i);
|
|
|
|
|
|
|
|
list_for_each_entry(rec, &list, list) {
|
|
|
|
struct reada_control *rc = rec->rc;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* if the generation doesn't match, just ignore this
|
|
|
|
* extctl. This will probably cut off a branch from
|
|
|
|
* prefetch. Alternatively one could start a new (sub-)
|
|
|
|
* prefetch for this branch, starting again from root.
|
|
|
|
* FIXME: move the generation check out of this loop
|
|
|
|
*/
|
|
|
|
#ifdef DEBUG
|
|
|
|
if (rec->generation != generation) {
|
2013-12-20 23:37:06 +07:00
|
|
|
btrfs_debug(root->fs_info,
|
|
|
|
"generation mismatch for (%llu,%d,%llu) %llu != %llu",
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
key.objectid, key.type, key.offset,
|
|
|
|
rec->generation, generation);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
if (rec->generation == generation &&
|
|
|
|
btrfs_comp_cpu_keys(&key, &rc->key_end) < 0 &&
|
|
|
|
btrfs_comp_cpu_keys(&next_key, &rc->key_start) > 0)
|
|
|
|
reada_add_block(rc, bytenr, &next_key,
|
|
|
|
level - 1, n_gen);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* free extctl records
|
|
|
|
*/
|
|
|
|
while (!list_empty(&list)) {
|
|
|
|
struct reada_control *rc;
|
|
|
|
struct reada_extctl *rec;
|
|
|
|
|
|
|
|
rec = list_first_entry(&list, struct reada_extctl, list);
|
|
|
|
list_del(&rec->list);
|
|
|
|
rc = rec->rc;
|
|
|
|
kfree(rec);
|
|
|
|
|
|
|
|
kref_get(&rc->refcnt);
|
|
|
|
if (atomic_dec_and_test(&rc->elems)) {
|
|
|
|
kref_put(&rc->refcnt, reada_control_release);
|
|
|
|
wake_up(&rc->wait);
|
|
|
|
}
|
|
|
|
kref_put(&rc->refcnt, reada_control_release);
|
|
|
|
|
|
|
|
reada_extent_put(fs_info, re); /* one ref for each entry */
|
|
|
|
}
|
|
|
|
reada_extent_put(fs_info, re); /* our ref */
|
|
|
|
if (for_dev)
|
|
|
|
atomic_dec(&for_dev->reada_in_flight);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* start is passed separately in case eb in NULL, which may be the case with
|
|
|
|
* failed I/O
|
|
|
|
*/
|
|
|
|
int btree_readahead_hook(struct btrfs_root *root, struct extent_buffer *eb,
|
|
|
|
u64 start, int err)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = __readahead_hook(root, eb, start, err);
|
|
|
|
|
|
|
|
reada_start_machine(root->fs_info);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct reada_zone *reada_find_zone(struct btrfs_fs_info *fs_info,
|
|
|
|
struct btrfs_device *dev, u64 logical,
|
2011-11-04 20:41:02 +07:00
|
|
|
struct btrfs_bio *bbio)
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
struct reada_zone *zone;
|
|
|
|
struct btrfs_block_group_cache *cache = NULL;
|
|
|
|
u64 start;
|
|
|
|
u64 end;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
zone = NULL;
|
|
|
|
spin_lock(&fs_info->reada_lock);
|
|
|
|
ret = radix_tree_gang_lookup(&dev->reada_zones, (void **)&zone,
|
|
|
|
logical >> PAGE_CACHE_SHIFT, 1);
|
2015-12-18 20:48:48 +07:00
|
|
|
if (ret == 1 && logical >= zone->start && logical <= zone->end) {
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
kref_get(&zone->refcnt);
|
|
|
|
spin_unlock(&fs_info->reada_lock);
|
2015-12-18 20:48:48 +07:00
|
|
|
return zone;
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
}
|
|
|
|
|
2015-12-18 20:48:48 +07:00
|
|
|
spin_unlock(&fs_info->reada_lock);
|
|
|
|
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
cache = btrfs_lookup_block_group(fs_info, logical);
|
|
|
|
if (!cache)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
start = cache->key.objectid;
|
|
|
|
end = start + cache->key.offset - 1;
|
|
|
|
btrfs_put_block_group(cache);
|
|
|
|
|
|
|
|
zone = kzalloc(sizeof(*zone), GFP_NOFS);
|
|
|
|
if (!zone)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
zone->start = start;
|
|
|
|
zone->end = end;
|
|
|
|
INIT_LIST_HEAD(&zone->list);
|
|
|
|
spin_lock_init(&zone->lock);
|
|
|
|
zone->locked = 0;
|
|
|
|
kref_init(&zone->refcnt);
|
|
|
|
zone->elems = 0;
|
|
|
|
zone->device = dev; /* our device always sits at index 0 */
|
2011-11-04 20:41:02 +07:00
|
|
|
for (i = 0; i < bbio->num_stripes; ++i) {
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
/* bounds have already been checked */
|
2011-11-04 20:41:02 +07:00
|
|
|
zone->devs[i] = bbio->stripes[i].dev;
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
}
|
2011-11-04 20:41:02 +07:00
|
|
|
zone->ndevs = bbio->num_stripes;
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
|
|
|
|
spin_lock(&fs_info->reada_lock);
|
|
|
|
ret = radix_tree_insert(&dev->reada_zones,
|
2012-02-29 00:42:44 +07:00
|
|
|
(unsigned long)(zone->end >> PAGE_CACHE_SHIFT),
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
zone);
|
|
|
|
|
2012-02-25 15:09:30 +07:00
|
|
|
if (ret == -EEXIST) {
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
kfree(zone);
|
2012-02-25 15:09:30 +07:00
|
|
|
ret = radix_tree_gang_lookup(&dev->reada_zones, (void **)&zone,
|
|
|
|
logical >> PAGE_CACHE_SHIFT, 1);
|
2015-12-18 20:56:08 +07:00
|
|
|
if (ret == 1 && logical >= zone->start && logical <= zone->end)
|
2012-02-25 15:09:30 +07:00
|
|
|
kref_get(&zone->refcnt);
|
2015-12-18 20:56:08 +07:00
|
|
|
else
|
|
|
|
zone = NULL;
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
}
|
2012-02-25 15:09:30 +07:00
|
|
|
spin_unlock(&fs_info->reada_lock);
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
|
|
|
|
return zone;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct reada_extent *reada_find_extent(struct btrfs_root *root,
|
|
|
|
u64 logical,
|
|
|
|
struct btrfs_key *top, int level)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
struct reada_extent *re = NULL;
|
2012-02-25 15:09:30 +07:00
|
|
|
struct reada_extent *re_exist = NULL;
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
struct btrfs_fs_info *fs_info = root->fs_info;
|
2011-11-04 20:41:02 +07:00
|
|
|
struct btrfs_bio *bbio = NULL;
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
struct btrfs_device *dev;
|
2012-02-25 15:09:47 +07:00
|
|
|
struct btrfs_device *prev_dev;
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
u32 blocksize;
|
|
|
|
u64 length;
|
2015-06-20 01:52:49 +07:00
|
|
|
int real_stripes;
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
int nzones = 0;
|
|
|
|
int i;
|
|
|
|
unsigned long index = logical >> PAGE_CACHE_SHIFT;
|
2012-11-06 19:15:27 +07:00
|
|
|
int dev_replace_is_ongoing;
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
|
|
|
|
spin_lock(&fs_info->reada_lock);
|
|
|
|
re = radix_tree_lookup(&fs_info->reada_tree, index);
|
|
|
|
if (re)
|
2012-08-30 03:31:33 +07:00
|
|
|
re->refcnt++;
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
spin_unlock(&fs_info->reada_lock);
|
|
|
|
|
2012-02-25 15:09:30 +07:00
|
|
|
if (re)
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
return re;
|
|
|
|
|
|
|
|
re = kzalloc(sizeof(*re), GFP_NOFS);
|
|
|
|
if (!re)
|
|
|
|
return NULL;
|
|
|
|
|
2014-06-05 00:22:26 +07:00
|
|
|
blocksize = root->nodesize;
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
re->logical = logical;
|
|
|
|
re->top = *top;
|
|
|
|
INIT_LIST_HEAD(&re->extctl);
|
|
|
|
spin_lock_init(&re->lock);
|
2012-08-30 03:31:33 +07:00
|
|
|
re->refcnt = 1;
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
|
|
|
|
/*
|
|
|
|
* map block
|
|
|
|
*/
|
|
|
|
length = blocksize;
|
2012-11-06 20:16:24 +07:00
|
|
|
ret = btrfs_map_block(fs_info, REQ_GET_READ_MIRRORS, logical, &length,
|
|
|
|
&bbio, 0);
|
2011-11-04 20:41:02 +07:00
|
|
|
if (ret || !bbio || length < blocksize)
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
goto error;
|
|
|
|
|
2012-03-28 01:21:26 +07:00
|
|
|
if (bbio->num_stripes > BTRFS_MAX_MIRRORS) {
|
2013-12-20 23:37:06 +07:00
|
|
|
btrfs_err(root->fs_info,
|
|
|
|
"readahead: more than %d copies not supported",
|
|
|
|
BTRFS_MAX_MIRRORS);
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
goto error;
|
|
|
|
}
|
|
|
|
|
2015-06-20 01:52:49 +07:00
|
|
|
real_stripes = bbio->num_stripes - bbio->num_tgtdevs;
|
|
|
|
for (nzones = 0; nzones < real_stripes; ++nzones) {
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
struct reada_zone *zone;
|
|
|
|
|
2011-11-04 20:41:02 +07:00
|
|
|
dev = bbio->stripes[nzones].dev;
|
|
|
|
zone = reada_find_zone(fs_info, dev, logical, bbio);
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
if (!zone)
|
|
|
|
break;
|
|
|
|
|
|
|
|
re->zones[nzones] = zone;
|
|
|
|
spin_lock(&zone->lock);
|
|
|
|
if (!zone->elems)
|
|
|
|
kref_get(&zone->refcnt);
|
|
|
|
++zone->elems;
|
|
|
|
spin_unlock(&zone->lock);
|
|
|
|
spin_lock(&fs_info->reada_lock);
|
|
|
|
kref_put(&zone->refcnt, reada_zone_release);
|
|
|
|
spin_unlock(&fs_info->reada_lock);
|
|
|
|
}
|
|
|
|
re->nzones = nzones;
|
|
|
|
if (nzones == 0) {
|
|
|
|
/* not a single zone found, error and out */
|
|
|
|
goto error;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* insert extent in reada_tree + all per-device trees, all or nothing */
|
2012-11-06 19:15:27 +07:00
|
|
|
btrfs_dev_replace_lock(&fs_info->dev_replace);
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
spin_lock(&fs_info->reada_lock);
|
|
|
|
ret = radix_tree_insert(&fs_info->reada_tree, index, re);
|
2012-02-25 15:09:30 +07:00
|
|
|
if (ret == -EEXIST) {
|
|
|
|
re_exist = radix_tree_lookup(&fs_info->reada_tree, index);
|
|
|
|
BUG_ON(!re_exist);
|
2012-08-30 03:31:33 +07:00
|
|
|
re_exist->refcnt++;
|
2012-02-25 15:09:30 +07:00
|
|
|
spin_unlock(&fs_info->reada_lock);
|
2012-11-06 19:15:27 +07:00
|
|
|
btrfs_dev_replace_unlock(&fs_info->dev_replace);
|
2012-02-25 15:09:30 +07:00
|
|
|
goto error;
|
|
|
|
}
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
if (ret) {
|
|
|
|
spin_unlock(&fs_info->reada_lock);
|
2012-11-06 19:15:27 +07:00
|
|
|
btrfs_dev_replace_unlock(&fs_info->dev_replace);
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
goto error;
|
|
|
|
}
|
2012-02-25 15:09:47 +07:00
|
|
|
prev_dev = NULL;
|
2012-11-06 19:15:27 +07:00
|
|
|
dev_replace_is_ongoing = btrfs_dev_replace_is_ongoing(
|
|
|
|
&fs_info->dev_replace);
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
for (i = 0; i < nzones; ++i) {
|
2011-11-04 20:41:02 +07:00
|
|
|
dev = bbio->stripes[i].dev;
|
2012-02-25 15:09:47 +07:00
|
|
|
if (dev == prev_dev) {
|
|
|
|
/*
|
|
|
|
* in case of DUP, just add the first zone. As both
|
|
|
|
* are on the same device, there's nothing to gain
|
|
|
|
* from adding both.
|
|
|
|
* Also, it wouldn't work, as the tree is per device
|
|
|
|
* and adding would fail with EEXIST
|
|
|
|
*/
|
|
|
|
continue;
|
|
|
|
}
|
2012-11-06 17:43:11 +07:00
|
|
|
if (!dev->bdev) {
|
2014-06-11 09:55:22 +07:00
|
|
|
/*
|
|
|
|
* cannot read ahead on missing device, but for RAID5/6,
|
|
|
|
* REQ_GET_READ_MIRRORS return 1. So don't skip missing
|
|
|
|
* device for such case.
|
|
|
|
*/
|
|
|
|
if (nzones > 1)
|
|
|
|
continue;
|
2012-11-06 17:43:11 +07:00
|
|
|
}
|
2012-11-06 19:15:27 +07:00
|
|
|
if (dev_replace_is_ongoing &&
|
|
|
|
dev == fs_info->dev_replace.tgtdev) {
|
|
|
|
/*
|
|
|
|
* as this device is selected for reading only as
|
|
|
|
* a last resort, skip it for read ahead.
|
|
|
|
*/
|
|
|
|
continue;
|
|
|
|
}
|
2012-02-25 15:09:47 +07:00
|
|
|
prev_dev = dev;
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
ret = radix_tree_insert(&dev->reada_extents, index, re);
|
|
|
|
if (ret) {
|
|
|
|
while (--i >= 0) {
|
2011-11-04 20:41:02 +07:00
|
|
|
dev = bbio->stripes[i].dev;
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
BUG_ON(dev == NULL);
|
2012-11-06 17:43:11 +07:00
|
|
|
/* ignore whether the entry was inserted */
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
radix_tree_delete(&dev->reada_extents, index);
|
|
|
|
}
|
|
|
|
BUG_ON(fs_info == NULL);
|
|
|
|
radix_tree_delete(&fs_info->reada_tree, index);
|
|
|
|
spin_unlock(&fs_info->reada_lock);
|
2012-11-06 19:15:27 +07:00
|
|
|
btrfs_dev_replace_unlock(&fs_info->dev_replace);
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
goto error;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
spin_unlock(&fs_info->reada_lock);
|
2012-11-06 19:15:27 +07:00
|
|
|
btrfs_dev_replace_unlock(&fs_info->dev_replace);
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
|
2015-01-20 14:11:34 +07:00
|
|
|
btrfs_put_bbio(bbio);
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
return re;
|
|
|
|
|
|
|
|
error:
|
|
|
|
while (nzones) {
|
|
|
|
struct reada_zone *zone;
|
|
|
|
|
|
|
|
--nzones;
|
|
|
|
zone = re->zones[nzones];
|
|
|
|
kref_get(&zone->refcnt);
|
|
|
|
spin_lock(&zone->lock);
|
|
|
|
--zone->elems;
|
|
|
|
if (zone->elems == 0) {
|
|
|
|
/*
|
|
|
|
* no fs_info->reada_lock needed, as this can't be
|
|
|
|
* the last ref
|
|
|
|
*/
|
|
|
|
kref_put(&zone->refcnt, reada_zone_release);
|
|
|
|
}
|
|
|
|
spin_unlock(&zone->lock);
|
|
|
|
|
|
|
|
spin_lock(&fs_info->reada_lock);
|
|
|
|
kref_put(&zone->refcnt, reada_zone_release);
|
|
|
|
spin_unlock(&fs_info->reada_lock);
|
|
|
|
}
|
2015-01-20 14:11:34 +07:00
|
|
|
btrfs_put_bbio(bbio);
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
kfree(re);
|
2012-02-25 15:09:30 +07:00
|
|
|
return re_exist;
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static void reada_extent_put(struct btrfs_fs_info *fs_info,
|
|
|
|
struct reada_extent *re)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
unsigned long index = re->logical >> PAGE_CACHE_SHIFT;
|
|
|
|
|
|
|
|
spin_lock(&fs_info->reada_lock);
|
2012-08-30 03:31:33 +07:00
|
|
|
if (--re->refcnt) {
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
spin_unlock(&fs_info->reada_lock);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
radix_tree_delete(&fs_info->reada_tree, index);
|
|
|
|
for (i = 0; i < re->nzones; ++i) {
|
|
|
|
struct reada_zone *zone = re->zones[i];
|
|
|
|
|
|
|
|
radix_tree_delete(&zone->device->reada_extents, index);
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_unlock(&fs_info->reada_lock);
|
|
|
|
|
|
|
|
for (i = 0; i < re->nzones; ++i) {
|
|
|
|
struct reada_zone *zone = re->zones[i];
|
|
|
|
|
|
|
|
kref_get(&zone->refcnt);
|
|
|
|
spin_lock(&zone->lock);
|
|
|
|
--zone->elems;
|
|
|
|
if (zone->elems == 0) {
|
|
|
|
/* no fs_info->reada_lock needed, as this can't be
|
|
|
|
* the last ref */
|
|
|
|
kref_put(&zone->refcnt, reada_zone_release);
|
|
|
|
}
|
|
|
|
spin_unlock(&zone->lock);
|
|
|
|
|
|
|
|
spin_lock(&fs_info->reada_lock);
|
|
|
|
kref_put(&zone->refcnt, reada_zone_release);
|
|
|
|
spin_unlock(&fs_info->reada_lock);
|
|
|
|
}
|
|
|
|
if (re->scheduled_for)
|
|
|
|
atomic_dec(&re->scheduled_for->reada_in_flight);
|
|
|
|
|
|
|
|
kfree(re);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void reada_zone_release(struct kref *kref)
|
|
|
|
{
|
|
|
|
struct reada_zone *zone = container_of(kref, struct reada_zone, refcnt);
|
|
|
|
|
|
|
|
radix_tree_delete(&zone->device->reada_zones,
|
|
|
|
zone->end >> PAGE_CACHE_SHIFT);
|
|
|
|
|
|
|
|
kfree(zone);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void reada_control_release(struct kref *kref)
|
|
|
|
{
|
|
|
|
struct reada_control *rc = container_of(kref, struct reada_control,
|
|
|
|
refcnt);
|
|
|
|
|
|
|
|
kfree(rc);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int reada_add_block(struct reada_control *rc, u64 logical,
|
|
|
|
struct btrfs_key *top, int level, u64 generation)
|
|
|
|
{
|
|
|
|
struct btrfs_root *root = rc->root;
|
|
|
|
struct reada_extent *re;
|
|
|
|
struct reada_extctl *rec;
|
|
|
|
|
|
|
|
re = reada_find_extent(root, logical, top, level); /* takes one ref */
|
|
|
|
if (!re)
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
rec = kzalloc(sizeof(*rec), GFP_NOFS);
|
|
|
|
if (!rec) {
|
|
|
|
reada_extent_put(root->fs_info, re);
|
2015-10-20 20:56:23 +07:00
|
|
|
return -ENOMEM;
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
rec->rc = rc;
|
|
|
|
rec->generation = generation;
|
|
|
|
atomic_inc(&rc->elems);
|
|
|
|
|
|
|
|
spin_lock(&re->lock);
|
|
|
|
list_add_tail(&rec->list, &re->extctl);
|
|
|
|
spin_unlock(&re->lock);
|
|
|
|
|
|
|
|
/* leave the ref on the extent */
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* called with fs_info->reada_lock held
|
|
|
|
*/
|
|
|
|
static void reada_peer_zones_set_lock(struct reada_zone *zone, int lock)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
unsigned long index = zone->end >> PAGE_CACHE_SHIFT;
|
|
|
|
|
|
|
|
for (i = 0; i < zone->ndevs; ++i) {
|
|
|
|
struct reada_zone *peer;
|
|
|
|
peer = radix_tree_lookup(&zone->devs[i]->reada_zones, index);
|
|
|
|
if (peer && peer->device != zone->device)
|
|
|
|
peer->locked = lock;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* called with fs_info->reada_lock held
|
|
|
|
*/
|
|
|
|
static int reada_pick_zone(struct btrfs_device *dev)
|
|
|
|
{
|
|
|
|
struct reada_zone *top_zone = NULL;
|
|
|
|
struct reada_zone *top_locked_zone = NULL;
|
|
|
|
u64 top_elems = 0;
|
|
|
|
u64 top_locked_elems = 0;
|
|
|
|
unsigned long index = 0;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (dev->reada_curr_zone) {
|
|
|
|
reada_peer_zones_set_lock(dev->reada_curr_zone, 0);
|
|
|
|
kref_put(&dev->reada_curr_zone->refcnt, reada_zone_release);
|
|
|
|
dev->reada_curr_zone = NULL;
|
|
|
|
}
|
|
|
|
/* pick the zone with the most elements */
|
|
|
|
while (1) {
|
|
|
|
struct reada_zone *zone;
|
|
|
|
|
|
|
|
ret = radix_tree_gang_lookup(&dev->reada_zones,
|
|
|
|
(void **)&zone, index, 1);
|
|
|
|
if (ret == 0)
|
|
|
|
break;
|
|
|
|
index = (zone->end >> PAGE_CACHE_SHIFT) + 1;
|
|
|
|
if (zone->locked) {
|
|
|
|
if (zone->elems > top_locked_elems) {
|
|
|
|
top_locked_elems = zone->elems;
|
|
|
|
top_locked_zone = zone;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
if (zone->elems > top_elems) {
|
|
|
|
top_elems = zone->elems;
|
|
|
|
top_zone = zone;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (top_zone)
|
|
|
|
dev->reada_curr_zone = top_zone;
|
|
|
|
else if (top_locked_zone)
|
|
|
|
dev->reada_curr_zone = top_locked_zone;
|
|
|
|
else
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
dev->reada_next = dev->reada_curr_zone->start;
|
|
|
|
kref_get(&dev->reada_curr_zone->refcnt);
|
|
|
|
reada_peer_zones_set_lock(dev->reada_curr_zone, 1);
|
|
|
|
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int reada_start_machine_dev(struct btrfs_fs_info *fs_info,
|
|
|
|
struct btrfs_device *dev)
|
|
|
|
{
|
|
|
|
struct reada_extent *re = NULL;
|
|
|
|
int mirror_num = 0;
|
|
|
|
struct extent_buffer *eb = NULL;
|
|
|
|
u64 logical;
|
|
|
|
int ret;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
spin_lock(&fs_info->reada_lock);
|
|
|
|
if (dev->reada_curr_zone == NULL) {
|
|
|
|
ret = reada_pick_zone(dev);
|
|
|
|
if (!ret) {
|
|
|
|
spin_unlock(&fs_info->reada_lock);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* FIXME currently we issue the reads one extent at a time. If we have
|
|
|
|
* a contiguous block of extents, we could also coagulate them or use
|
|
|
|
* plugging to speed things up
|
|
|
|
*/
|
|
|
|
ret = radix_tree_gang_lookup(&dev->reada_extents, (void **)&re,
|
|
|
|
dev->reada_next >> PAGE_CACHE_SHIFT, 1);
|
2015-12-18 20:33:05 +07:00
|
|
|
if (ret == 0 || re->logical > dev->reada_curr_zone->end) {
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
ret = reada_pick_zone(dev);
|
|
|
|
if (!ret) {
|
|
|
|
spin_unlock(&fs_info->reada_lock);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
re = NULL;
|
|
|
|
ret = radix_tree_gang_lookup(&dev->reada_extents, (void **)&re,
|
|
|
|
dev->reada_next >> PAGE_CACHE_SHIFT, 1);
|
|
|
|
}
|
|
|
|
if (ret == 0) {
|
|
|
|
spin_unlock(&fs_info->reada_lock);
|
|
|
|
return 0;
|
|
|
|
}
|
2014-06-15 07:18:25 +07:00
|
|
|
dev->reada_next = re->logical + fs_info->tree_root->nodesize;
|
2012-08-30 03:31:33 +07:00
|
|
|
re->refcnt++;
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
|
|
|
|
spin_unlock(&fs_info->reada_lock);
|
|
|
|
|
2015-12-31 21:57:52 +07:00
|
|
|
spin_lock(&re->lock);
|
|
|
|
if (re->scheduled_for || list_empty(&re->extctl)) {
|
|
|
|
spin_unlock(&re->lock);
|
|
|
|
reada_extent_put(fs_info, re);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
re->scheduled_for = dev;
|
|
|
|
spin_unlock(&re->lock);
|
|
|
|
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
/*
|
|
|
|
* find mirror num
|
|
|
|
*/
|
|
|
|
for (i = 0; i < re->nzones; ++i) {
|
|
|
|
if (re->zones[i]->device == dev) {
|
|
|
|
mirror_num = i + 1;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
logical = re->logical;
|
|
|
|
|
|
|
|
reada_extent_put(fs_info, re);
|
|
|
|
|
|
|
|
atomic_inc(&dev->reada_in_flight);
|
2014-06-15 07:18:25 +07:00
|
|
|
ret = reada_tree_block_flagged(fs_info->extent_root, logical,
|
2014-06-15 07:24:21 +07:00
|
|
|
mirror_num, &eb);
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
if (ret)
|
|
|
|
__readahead_hook(fs_info->extent_root, NULL, logical, ret);
|
|
|
|
else if (eb)
|
|
|
|
__readahead_hook(fs_info->extent_root, eb, eb->start, ret);
|
|
|
|
|
|
|
|
if (eb)
|
|
|
|
free_extent_buffer(eb);
|
|
|
|
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
}
|
|
|
|
|
2014-02-28 09:46:19 +07:00
|
|
|
static void reada_start_machine_worker(struct btrfs_work *work)
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
{
|
|
|
|
struct reada_machine_work *rmw;
|
|
|
|
struct btrfs_fs_info *fs_info;
|
2012-02-03 17:20:04 +07:00
|
|
|
int old_ioprio;
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
|
|
|
|
rmw = container_of(work, struct reada_machine_work, work);
|
|
|
|
fs_info = rmw->fs_info;
|
|
|
|
|
|
|
|
kfree(rmw);
|
|
|
|
|
2012-02-03 17:20:04 +07:00
|
|
|
old_ioprio = IOPRIO_PRIO_VALUE(task_nice_ioclass(current),
|
|
|
|
task_nice_ioprio(current));
|
|
|
|
set_task_ioprio(current, BTRFS_IOPRIO_READA);
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
__reada_start_machine(fs_info);
|
2012-02-03 17:20:04 +07:00
|
|
|
set_task_ioprio(current, old_ioprio);
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static void __reada_start_machine(struct btrfs_fs_info *fs_info)
|
|
|
|
{
|
|
|
|
struct btrfs_device *device;
|
|
|
|
struct btrfs_fs_devices *fs_devices = fs_info->fs_devices;
|
|
|
|
u64 enqueued;
|
|
|
|
u64 total = 0;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
do {
|
|
|
|
enqueued = 0;
|
|
|
|
list_for_each_entry(device, &fs_devices->devices, dev_list) {
|
|
|
|
if (atomic_read(&device->reada_in_flight) <
|
|
|
|
MAX_IN_FLIGHT)
|
|
|
|
enqueued += reada_start_machine_dev(fs_info,
|
|
|
|
device);
|
|
|
|
}
|
|
|
|
total += enqueued;
|
|
|
|
} while (enqueued && total < 10000);
|
|
|
|
|
|
|
|
if (enqueued == 0)
|
|
|
|
return;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If everything is already in the cache, this is effectively single
|
|
|
|
* threaded. To a) not hold the caller for too long and b) to utilize
|
|
|
|
* more cores, we broke the loop above after 10000 iterations and now
|
|
|
|
* enqueue to workers to finish it. This will distribute the load to
|
|
|
|
* the cores.
|
|
|
|
*/
|
|
|
|
for (i = 0; i < 2; ++i)
|
|
|
|
reada_start_machine(fs_info);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void reada_start_machine(struct btrfs_fs_info *fs_info)
|
|
|
|
{
|
|
|
|
struct reada_machine_work *rmw;
|
|
|
|
|
|
|
|
rmw = kzalloc(sizeof(*rmw), GFP_NOFS);
|
|
|
|
if (!rmw) {
|
|
|
|
/* FIXME we cannot handle this properly right now */
|
|
|
|
BUG();
|
|
|
|
}
|
Btrfs: fix task hang under heavy compressed write
This has been reported and discussed for a long time, and this hang occurs in
both 3.15 and 3.16.
Btrfs now migrates to use kernel workqueue, but it introduces this hang problem.
Btrfs has a kind of work queued as an ordered way, which means that its
ordered_func() must be processed in the way of FIFO, so it usually looks like --
normal_work_helper(arg)
work = container_of(arg, struct btrfs_work, normal_work);
work->func() <---- (we name it work X)
for ordered_work in wq->ordered_list
ordered_work->ordered_func()
ordered_work->ordered_free()
The hang is a rare case, first when we find free space, we get an uncached block
group, then we go to read its free space cache inode for free space information,
so it will
file a readahead request
btrfs_readpages()
for page that is not in page cache
__do_readpage()
submit_extent_page()
btrfs_submit_bio_hook()
btrfs_bio_wq_end_io()
submit_bio()
end_workqueue_bio() <--(ret by the 1st endio)
queue a work(named work Y) for the 2nd
also the real endio()
So the hang occurs when work Y's work_struct and work X's work_struct happens
to share the same address.
A bit more explanation,
A,B,C -- struct btrfs_work
arg -- struct work_struct
kthread:
worker_thread()
pick up a work_struct from @worklist
process_one_work(arg)
worker->current_work = arg; <-- arg is A->normal_work
worker->current_func(arg)
normal_work_helper(arg)
A = container_of(arg, struct btrfs_work, normal_work);
A->func()
A->ordered_func()
A->ordered_free() <-- A gets freed
B->ordered_func()
submit_compressed_extents()
find_free_extent()
load_free_space_inode()
... <-- (the above readhead stack)
end_workqueue_bio()
btrfs_queue_work(work C)
B->ordered_free()
As if work A has a high priority in wq->ordered_list and there are more ordered
works queued after it, such as B->ordered_func(), its memory could have been
freed before normal_work_helper() returns, which means that kernel workqueue
code worker_thread() still has worker->current_work pointer to be work
A->normal_work's, ie. arg's address.
Meanwhile, work C is allocated after work A is freed, work C->normal_work
and work A->normal_work are likely to share the same address(I confirmed this
with ftrace output, so I'm not just guessing, it's rare though).
When another kthread picks up work C->normal_work to process, and finds our
kthread is processing it(see find_worker_executing_work()), it'll think
work C as a collision and skip then, which ends up nobody processing work C.
So the situation is that our kthread is waiting forever on work C.
Besides, there're other cases that can lead to deadlock, but the real problem
is that all btrfs workqueue shares one work->func, -- normal_work_helper,
so this makes each workqueue to have its own helper function, but only a
wraper pf normal_work_helper.
With this patch, I no long hit the above hang.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-08-15 22:36:53 +07:00
|
|
|
btrfs_init_work(&rmw->work, btrfs_readahead_helper,
|
|
|
|
reada_start_machine_worker, NULL, NULL);
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
rmw->fs_info = fs_info;
|
|
|
|
|
2014-02-28 09:46:13 +07:00
|
|
|
btrfs_queue_work(fs_info->readahead_workers, &rmw->work);
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef DEBUG
|
|
|
|
static void dump_devs(struct btrfs_fs_info *fs_info, int all)
|
|
|
|
{
|
|
|
|
struct btrfs_device *device;
|
|
|
|
struct btrfs_fs_devices *fs_devices = fs_info->fs_devices;
|
|
|
|
unsigned long index;
|
|
|
|
int ret;
|
|
|
|
int i;
|
|
|
|
int j;
|
|
|
|
int cnt;
|
|
|
|
|
|
|
|
spin_lock(&fs_info->reada_lock);
|
|
|
|
list_for_each_entry(device, &fs_devices->devices, dev_list) {
|
|
|
|
printk(KERN_DEBUG "dev %lld has %d in flight\n", device->devid,
|
|
|
|
atomic_read(&device->reada_in_flight));
|
|
|
|
index = 0;
|
|
|
|
while (1) {
|
|
|
|
struct reada_zone *zone;
|
|
|
|
ret = radix_tree_gang_lookup(&device->reada_zones,
|
|
|
|
(void **)&zone, index, 1);
|
|
|
|
if (ret == 0)
|
|
|
|
break;
|
|
|
|
printk(KERN_DEBUG " zone %llu-%llu elems %llu locked "
|
|
|
|
"%d devs", zone->start, zone->end, zone->elems,
|
|
|
|
zone->locked);
|
|
|
|
for (j = 0; j < zone->ndevs; ++j) {
|
|
|
|
printk(KERN_CONT " %lld",
|
|
|
|
zone->devs[j]->devid);
|
|
|
|
}
|
|
|
|
if (device->reada_curr_zone == zone)
|
|
|
|
printk(KERN_CONT " curr off %llu",
|
|
|
|
device->reada_next - zone->start);
|
|
|
|
printk(KERN_CONT "\n");
|
|
|
|
index = (zone->end >> PAGE_CACHE_SHIFT) + 1;
|
|
|
|
}
|
|
|
|
cnt = 0;
|
|
|
|
index = 0;
|
|
|
|
while (all) {
|
|
|
|
struct reada_extent *re = NULL;
|
|
|
|
|
|
|
|
ret = radix_tree_gang_lookup(&device->reada_extents,
|
|
|
|
(void **)&re, index, 1);
|
|
|
|
if (ret == 0)
|
|
|
|
break;
|
|
|
|
printk(KERN_DEBUG
|
|
|
|
" re: logical %llu size %u empty %d for %lld",
|
2014-06-15 07:18:25 +07:00
|
|
|
re->logical, fs_info->tree_root->nodesize,
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
list_empty(&re->extctl), re->scheduled_for ?
|
|
|
|
re->scheduled_for->devid : -1);
|
|
|
|
|
|
|
|
for (i = 0; i < re->nzones; ++i) {
|
|
|
|
printk(KERN_CONT " zone %llu-%llu devs",
|
|
|
|
re->zones[i]->start,
|
|
|
|
re->zones[i]->end);
|
|
|
|
for (j = 0; j < re->zones[i]->ndevs; ++j) {
|
|
|
|
printk(KERN_CONT " %lld",
|
|
|
|
re->zones[i]->devs[j]->devid);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
printk(KERN_CONT "\n");
|
|
|
|
index = (re->logical >> PAGE_CACHE_SHIFT) + 1;
|
|
|
|
if (++cnt > 15)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
index = 0;
|
|
|
|
cnt = 0;
|
|
|
|
while (all) {
|
|
|
|
struct reada_extent *re = NULL;
|
|
|
|
|
|
|
|
ret = radix_tree_gang_lookup(&fs_info->reada_tree, (void **)&re,
|
|
|
|
index, 1);
|
|
|
|
if (ret == 0)
|
|
|
|
break;
|
|
|
|
if (!re->scheduled_for) {
|
|
|
|
index = (re->logical >> PAGE_CACHE_SHIFT) + 1;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
printk(KERN_DEBUG
|
|
|
|
"re: logical %llu size %u list empty %d for %lld",
|
2014-06-15 07:18:25 +07:00
|
|
|
re->logical, fs_info->tree_root->nodesize,
|
|
|
|
list_empty(&re->extctl),
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
re->scheduled_for ? re->scheduled_for->devid : -1);
|
|
|
|
for (i = 0; i < re->nzones; ++i) {
|
|
|
|
printk(KERN_CONT " zone %llu-%llu devs",
|
|
|
|
re->zones[i]->start,
|
|
|
|
re->zones[i]->end);
|
|
|
|
for (i = 0; i < re->nzones; ++i) {
|
|
|
|
printk(KERN_CONT " zone %llu-%llu devs",
|
|
|
|
re->zones[i]->start,
|
|
|
|
re->zones[i]->end);
|
|
|
|
for (j = 0; j < re->zones[i]->ndevs; ++j) {
|
|
|
|
printk(KERN_CONT " %lld",
|
|
|
|
re->zones[i]->devs[j]->devid);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
printk(KERN_CONT "\n");
|
|
|
|
index = (re->logical >> PAGE_CACHE_SHIFT) + 1;
|
|
|
|
}
|
|
|
|
spin_unlock(&fs_info->reada_lock);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
|
|
* interface
|
|
|
|
*/
|
|
|
|
struct reada_control *btrfs_reada_add(struct btrfs_root *root,
|
|
|
|
struct btrfs_key *key_start, struct btrfs_key *key_end)
|
|
|
|
{
|
|
|
|
struct reada_control *rc;
|
|
|
|
u64 start;
|
|
|
|
u64 generation;
|
|
|
|
int level;
|
2015-10-20 20:56:23 +07:00
|
|
|
int ret;
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
struct extent_buffer *node;
|
|
|
|
static struct btrfs_key max_key = {
|
|
|
|
.objectid = (u64)-1,
|
|
|
|
.type = (u8)-1,
|
|
|
|
.offset = (u64)-1
|
|
|
|
};
|
|
|
|
|
|
|
|
rc = kzalloc(sizeof(*rc), GFP_NOFS);
|
|
|
|
if (!rc)
|
|
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
|
|
|
|
rc->root = root;
|
|
|
|
rc->key_start = *key_start;
|
|
|
|
rc->key_end = *key_end;
|
|
|
|
atomic_set(&rc->elems, 0);
|
|
|
|
init_waitqueue_head(&rc->wait);
|
|
|
|
kref_init(&rc->refcnt);
|
|
|
|
kref_get(&rc->refcnt); /* one ref for having elements */
|
|
|
|
|
|
|
|
node = btrfs_root_node(root);
|
|
|
|
start = node->start;
|
|
|
|
level = btrfs_header_level(node);
|
|
|
|
generation = btrfs_header_generation(node);
|
|
|
|
free_extent_buffer(node);
|
|
|
|
|
2015-10-20 20:56:23 +07:00
|
|
|
ret = reada_add_block(rc, start, &max_key, level, generation);
|
|
|
|
if (ret) {
|
2012-11-06 17:43:11 +07:00
|
|
|
kfree(rc);
|
2015-10-20 20:56:23 +07:00
|
|
|
return ERR_PTR(ret);
|
2012-11-06 17:43:11 +07:00
|
|
|
}
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
|
|
|
|
reada_start_machine(root->fs_info);
|
|
|
|
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef DEBUG
|
|
|
|
int btrfs_reada_wait(void *handle)
|
|
|
|
{
|
|
|
|
struct reada_control *rc = handle;
|
|
|
|
|
|
|
|
while (atomic_read(&rc->elems)) {
|
|
|
|
wait_event_timeout(rc->wait, atomic_read(&rc->elems) == 0,
|
|
|
|
5 * HZ);
|
2013-04-16 15:15:25 +07:00
|
|
|
dump_devs(rc->root->fs_info,
|
|
|
|
atomic_read(&rc->elems) < 10 ? 1 : 0);
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
}
|
|
|
|
|
2013-04-16 15:15:25 +07:00
|
|
|
dump_devs(rc->root->fs_info, atomic_read(&rc->elems) < 10 ? 1 : 0);
|
btrfs: initial readahead code and prototypes
This is the implementation for the generic read ahead framework.
To trigger a readahead, btrfs_reada_add must be called. It will start
a read ahead for the given range [start, end) on tree root. The returned
handle can either be used to wait on the readahead to finish
(btrfs_reada_wait), or to send it to the background (btrfs_reada_detach).
The read ahead works as follows:
On btrfs_reada_add, the root of the tree is inserted into a radix_tree.
reada_start_machine will then search for extents to prefetch and trigger
some reads. When a read finishes for a node, all contained node/leaf
pointers that lie in the given range will also be enqueued. The reads will
be triggered in sequential order, thus giving a big win over a naive
enumeration. It will also make use of multi-device layouts. Each disk
will have its on read pointer and all disks will by utilized in parallel.
Also will no two disks read both sides of a mirror simultaneously, as this
would waste seeking capacity. Instead both disks will read different parts
of the filesystem.
Any number of readaheads can be started in parallel. The read order will be
determined globally, i.e. 2 parallel readaheads will normally finish faster
than the 2 started one after another.
Changes v2:
- protect root->node by transaction instead of node_lock
- fix missed branches:
The readahead had a too simple check to determine if a branch from
a node should be checked or not. It now also records the upper bound
of each node to see if the requested RA range lies within.
- use KERN_CONT to debug output, to avoid line breaks
- defer reada_start_machine to worker to avoid deadlock
Changes v3:
- protect root->node by rcu
Changes v5:
- changed EIO-semantics of reada_tree_block_flagged
- remove spin_lock from reada_control and make elems an atomic_t
- remove unused read_total from reada_control
- kill reada_key_cmp, use btrfs_comp_cpu_keys instead
- use kref-style release functions where possible
- return struct reada_control * instead of void * from btrfs_reada_add
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-23 19:33:49 +07:00
|
|
|
|
|
|
|
kref_put(&rc->refcnt, reada_control_release);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
int btrfs_reada_wait(void *handle)
|
|
|
|
{
|
|
|
|
struct reada_control *rc = handle;
|
|
|
|
|
|
|
|
while (atomic_read(&rc->elems)) {
|
|
|
|
wait_event(rc->wait, atomic_read(&rc->elems) == 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
kref_put(&rc->refcnt, reada_control_release);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
void btrfs_reada_detach(void *handle)
|
|
|
|
{
|
|
|
|
struct reada_control *rc = handle;
|
|
|
|
|
|
|
|
kref_put(&rc->refcnt, reada_control_release);
|
|
|
|
}
|