lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
/*
|
|
|
|
* Copyright (C) 2016 CNEX Labs
|
|
|
|
* Initial release: Javier Gonzalez <javier@cnexlabs.com>
|
|
|
|
* Matias Bjorling <matias@cnexlabs.com>
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU General Public License version
|
|
|
|
* 2 as published by the Free Software Foundation.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful, but
|
|
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
|
|
* General Public License for more details.
|
|
|
|
*
|
|
|
|
* pblk-gc.c - pblk's garbage collector
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include "pblk.h"
|
|
|
|
#include <linux/delay.h>
|
|
|
|
|
|
|
|
static void pblk_gc_free_gc_rq(struct pblk_gc_rq *gc_rq)
|
|
|
|
{
|
2017-10-13 19:46:14 +07:00
|
|
|
if (gc_rq->data)
|
|
|
|
vfree(gc_rq->data);
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
kfree(gc_rq);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int pblk_gc_write(struct pblk *pblk)
|
|
|
|
{
|
|
|
|
struct pblk_gc *gc = &pblk->gc;
|
|
|
|
struct pblk_gc_rq *gc_rq, *tgc_rq;
|
|
|
|
LIST_HEAD(w_list);
|
|
|
|
|
|
|
|
spin_lock(&gc->w_lock);
|
|
|
|
if (list_empty(&gc->w_list)) {
|
|
|
|
spin_unlock(&gc->w_lock);
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
list_cut_position(&w_list, &gc->w_list, gc->w_list.prev);
|
|
|
|
gc->w_entries = 0;
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
spin_unlock(&gc->w_lock);
|
|
|
|
|
|
|
|
list_for_each_entry_safe(gc_rq, tgc_rq, &w_list, list) {
|
2017-10-13 19:46:14 +07:00
|
|
|
pblk_write_gc_to_cache(pblk, gc_rq);
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
list_del(&gc_rq->list);
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
kref_put(&gc_rq->line->ref, pblk_line_put);
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
pblk_gc_free_gc_rq(gc_rq);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pblk_gc_writer_kick(struct pblk_gc *gc)
|
|
|
|
{
|
|
|
|
wake_up_process(gc->gc_writer_ts);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pblk_put_line_back(struct pblk *pblk, struct pblk_line *line)
|
|
|
|
{
|
|
|
|
struct pblk_line_mgmt *l_mg = &pblk->l_mg;
|
|
|
|
struct list_head *move_list;
|
|
|
|
|
|
|
|
spin_lock(&line->lock);
|
|
|
|
WARN_ON(line->state != PBLK_LINESTATE_GC);
|
|
|
|
line->state = PBLK_LINESTATE_CLOSED;
|
|
|
|
move_list = pblk_line_gc_list(pblk, line);
|
|
|
|
spin_unlock(&line->lock);
|
|
|
|
|
|
|
|
if (move_list) {
|
|
|
|
spin_lock(&l_mg->gc_lock);
|
|
|
|
list_add_tail(&line->list, move_list);
|
|
|
|
spin_unlock(&l_mg->gc_lock);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pblk_gc_line_ws(struct work_struct *work)
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
{
|
2017-10-13 19:46:07 +07:00
|
|
|
struct pblk_line_ws *gc_rq_ws = container_of(work,
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
struct pblk_line_ws, ws);
|
2017-10-13 19:46:07 +07:00
|
|
|
struct pblk *pblk = gc_rq_ws->pblk;
|
2017-10-13 19:46:15 +07:00
|
|
|
struct nvm_tgt_dev *dev = pblk->dev;
|
|
|
|
struct nvm_geo *geo = &dev->geo;
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
struct pblk_gc *gc = &pblk->gc;
|
2017-10-13 19:46:07 +07:00
|
|
|
struct pblk_line *line = gc_rq_ws->line;
|
|
|
|
struct pblk_gc_rq *gc_rq = gc_rq_ws->priv;
|
2017-10-13 19:46:15 +07:00
|
|
|
int ret;
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
|
|
|
|
up(&gc->gc_sem);
|
|
|
|
|
2017-10-13 19:46:15 +07:00
|
|
|
gc_rq->data = vmalloc(gc_rq->nr_secs * geo->sec_size);
|
|
|
|
if (!gc_rq->data) {
|
|
|
|
pr_err("pblk: could not GC line:%d (%d/%d)\n",
|
|
|
|
line->id, *line->vsc, gc_rq->nr_secs);
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Read from GC victim block */
|
|
|
|
ret = pblk_submit_read_gc(pblk, gc_rq);
|
|
|
|
if (ret) {
|
|
|
|
pr_err("pblk: failed GC read in line:%d (err:%d)\n",
|
|
|
|
line->id, ret);
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!gc_rq->secs_to_gc)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
retry:
|
|
|
|
spin_lock(&gc->w_lock);
|
|
|
|
if (gc->w_entries >= PBLK_GC_RQ_QD) {
|
|
|
|
spin_unlock(&gc->w_lock);
|
|
|
|
pblk_gc_writer_kick(&pblk->gc);
|
|
|
|
usleep_range(128, 256);
|
|
|
|
goto retry;
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
}
|
2017-10-13 19:46:15 +07:00
|
|
|
gc->w_entries++;
|
|
|
|
list_add_tail(&gc_rq->list, &gc->w_list);
|
|
|
|
spin_unlock(&gc->w_lock);
|
|
|
|
|
|
|
|
pblk_gc_writer_kick(&pblk->gc);
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
|
2017-10-13 19:46:07 +07:00
|
|
|
kfree(gc_rq_ws);
|
2017-10-13 19:46:15 +07:00
|
|
|
return;
|
|
|
|
|
|
|
|
out:
|
|
|
|
pblk_gc_free_gc_rq(gc_rq);
|
|
|
|
kref_put(&line->ref, pblk_line_put);
|
|
|
|
kfree(gc_rq_ws);
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static void pblk_gc_line_prepare_ws(struct work_struct *work)
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
{
|
|
|
|
struct pblk_line_ws *line_ws = container_of(work, struct pblk_line_ws,
|
|
|
|
ws);
|
|
|
|
struct pblk *pblk = line_ws->pblk;
|
|
|
|
struct pblk_line *line = line_ws->line;
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
struct pblk_line_mgmt *l_mg = &pblk->l_mg;
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
struct pblk_line_meta *lm = &pblk->lm;
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
struct pblk_gc *gc = &pblk->gc;
|
|
|
|
struct line_emeta *emeta_buf;
|
2017-10-13 19:46:07 +07:00
|
|
|
struct pblk_line_ws *gc_rq_ws;
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
struct pblk_gc_rq *gc_rq;
|
2017-06-26 16:57:17 +07:00
|
|
|
__le64 *lba_list;
|
2017-10-13 19:46:14 +07:00
|
|
|
unsigned long *invalid_bitmap;
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
int sec_left, nr_secs, bit;
|
|
|
|
int ret;
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
|
2017-10-13 19:46:14 +07:00
|
|
|
invalid_bitmap = kmalloc(lm->sec_bitmap_len, GFP_KERNEL);
|
|
|
|
if (!invalid_bitmap) {
|
|
|
|
pr_err("pblk: could not allocate GC invalid bitmap\n");
|
|
|
|
goto fail_free_ws;
|
|
|
|
}
|
|
|
|
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
emeta_buf = pblk_malloc(lm->emeta_len[0], l_mg->emeta_alloc_type,
|
|
|
|
GFP_KERNEL);
|
|
|
|
if (!emeta_buf) {
|
|
|
|
pr_err("pblk: cannot use GC emeta\n");
|
2017-10-13 19:46:14 +07:00
|
|
|
goto fail_free_bitmap;
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
ret = pblk_line_read_emeta(pblk, line, emeta_buf);
|
|
|
|
if (ret) {
|
|
|
|
pr_err("pblk: line %d read emeta failed (%d)\n", line->id, ret);
|
|
|
|
goto fail_free_emeta;
|
|
|
|
}
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
|
2017-06-26 16:57:17 +07:00
|
|
|
/* If this read fails, it means that emeta is corrupted. For now, leave
|
|
|
|
* the line untouched. TODO: Implement a recovery routine that scans and
|
|
|
|
* moves all sectors on the line.
|
|
|
|
*/
|
|
|
|
lba_list = pblk_recov_get_lba_list(pblk, emeta_buf);
|
|
|
|
if (!lba_list) {
|
|
|
|
pr_err("pblk: could not interpret emeta (line %d)\n", line->id);
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
goto fail_free_emeta;
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
}
|
|
|
|
|
2017-10-13 19:46:14 +07:00
|
|
|
spin_lock(&line->lock);
|
|
|
|
bitmap_copy(invalid_bitmap, line->invalid_bitmap, lm->sec_per_line);
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
sec_left = pblk_line_vsc(line);
|
2017-10-13 19:46:14 +07:00
|
|
|
spin_unlock(&line->lock);
|
|
|
|
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
if (sec_left < 0) {
|
|
|
|
pr_err("pblk: corrupted GC line (%d)\n", line->id);
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
goto fail_free_emeta;
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
bit = -1;
|
|
|
|
next_rq:
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
gc_rq = kmalloc(sizeof(struct pblk_gc_rq), GFP_KERNEL);
|
|
|
|
if (!gc_rq)
|
|
|
|
goto fail_free_emeta;
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
nr_secs = 0;
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
do {
|
2017-10-13 19:46:14 +07:00
|
|
|
bit = find_next_zero_bit(invalid_bitmap, lm->sec_per_line,
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
bit + 1);
|
|
|
|
if (bit > line->emeta_ssec)
|
|
|
|
break;
|
|
|
|
|
2017-10-13 19:46:14 +07:00
|
|
|
gc_rq->paddr_list[nr_secs] = bit;
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
gc_rq->lba_list[nr_secs++] = le64_to_cpu(lba_list[bit]);
|
|
|
|
} while (nr_secs < pblk->max_write_pgs);
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
if (unlikely(!nr_secs)) {
|
|
|
|
kfree(gc_rq);
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
gc_rq->nr_secs = nr_secs;
|
|
|
|
gc_rq->line = line;
|
|
|
|
|
2017-10-13 19:46:07 +07:00
|
|
|
gc_rq_ws = kmalloc(sizeof(struct pblk_line_ws), GFP_KERNEL);
|
|
|
|
if (!gc_rq_ws)
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
goto fail_free_gc_rq;
|
|
|
|
|
2017-10-13 19:46:07 +07:00
|
|
|
gc_rq_ws->pblk = pblk;
|
|
|
|
gc_rq_ws->line = line;
|
|
|
|
gc_rq_ws->priv = gc_rq;
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
|
2017-10-13 19:46:45 +07:00
|
|
|
/* The write GC path can be much slower than the read GC one due to
|
|
|
|
* the budget imposed by the rate-limiter. Balance in case that we get
|
|
|
|
* back pressure from the write GC path.
|
|
|
|
*/
|
|
|
|
while (down_timeout(&gc->gc_sem, msecs_to_jiffies(30000)))
|
|
|
|
io_schedule();
|
|
|
|
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
kref_get(&line->ref);
|
|
|
|
|
2017-10-13 19:46:07 +07:00
|
|
|
INIT_WORK(&gc_rq_ws->ws, pblk_gc_line_ws);
|
|
|
|
queue_work(gc->gc_line_reader_wq, &gc_rq_ws->ws);
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
sec_left -= nr_secs;
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
if (sec_left > 0)
|
|
|
|
goto next_rq;
|
|
|
|
|
|
|
|
out:
|
2017-06-26 16:57:17 +07:00
|
|
|
pblk_mfree(emeta_buf, l_mg->emeta_alloc_type);
|
2017-10-13 19:46:07 +07:00
|
|
|
kfree(line_ws);
|
2017-10-13 19:46:14 +07:00
|
|
|
kfree(invalid_bitmap);
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
|
|
|
|
kref_put(&line->ref, pblk_line_put);
|
2017-10-13 19:46:41 +07:00
|
|
|
atomic_dec(&gc->read_inflight_gc);
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
fail_free_gc_rq:
|
|
|
|
kfree(gc_rq);
|
|
|
|
fail_free_emeta:
|
|
|
|
pblk_mfree(emeta_buf, l_mg->emeta_alloc_type);
|
2017-10-13 19:46:14 +07:00
|
|
|
fail_free_bitmap:
|
|
|
|
kfree(invalid_bitmap);
|
|
|
|
fail_free_ws:
|
|
|
|
kfree(line_ws);
|
|
|
|
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
pblk_put_line_back(pblk, line);
|
|
|
|
kref_put(&line->ref, pblk_line_put);
|
2017-10-13 19:46:41 +07:00
|
|
|
atomic_dec(&gc->read_inflight_gc);
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
|
|
|
|
pr_err("pblk: Failed to GC line %d\n", line->id);
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static int pblk_gc_line(struct pblk *pblk, struct pblk_line *line)
|
|
|
|
{
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
struct pblk_gc *gc = &pblk->gc;
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
struct pblk_line_ws *line_ws;
|
|
|
|
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
pr_debug("pblk: line '%d' being reclaimed for GC\n", line->id);
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
|
2017-10-13 19:46:07 +07:00
|
|
|
line_ws = kmalloc(sizeof(struct pblk_line_ws), GFP_KERNEL);
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
if (!line_ws)
|
|
|
|
return -ENOMEM;
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
|
|
|
|
line_ws->pblk = pblk;
|
|
|
|
line_ws->line = line;
|
|
|
|
|
2017-10-13 19:46:41 +07:00
|
|
|
atomic_inc(&gc->pipeline_gc);
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
INIT_WORK(&line_ws->ws, pblk_gc_line_prepare_ws);
|
|
|
|
queue_work(gc->gc_reader_wq, &line_ws->ws);
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2017-10-13 19:46:44 +07:00
|
|
|
static void pblk_gc_reader_kick(struct pblk_gc *gc)
|
|
|
|
{
|
|
|
|
wake_up_process(gc->gc_reader_ts);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pblk_gc_kick(struct pblk *pblk)
|
|
|
|
{
|
|
|
|
struct pblk_gc *gc = &pblk->gc;
|
|
|
|
|
|
|
|
pblk_gc_writer_kick(gc);
|
|
|
|
pblk_gc_reader_kick(gc);
|
|
|
|
|
|
|
|
/* If we're shutting down GC, let's not start it up again */
|
|
|
|
if (gc->gc_enabled) {
|
|
|
|
wake_up_process(gc->gc_ts);
|
|
|
|
mod_timer(&gc->gc_timer,
|
|
|
|
jiffies + msecs_to_jiffies(GC_TIME_MSECS));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
static int pblk_gc_read(struct pblk *pblk)
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
{
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
struct pblk_gc *gc = &pblk->gc;
|
|
|
|
struct pblk_line *line;
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
spin_lock(&gc->r_lock);
|
|
|
|
if (list_empty(&gc->r_list)) {
|
|
|
|
spin_unlock(&gc->r_lock);
|
|
|
|
return 1;
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
}
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
|
|
|
|
line = list_first_entry(&gc->r_list, struct pblk_line, list);
|
|
|
|
list_del(&line->list);
|
|
|
|
spin_unlock(&gc->r_lock);
|
|
|
|
|
|
|
|
pblk_gc_kick(pblk);
|
|
|
|
|
|
|
|
if (pblk_gc_line(pblk, line))
|
|
|
|
pr_err("pblk: failed to GC line %d\n", line->id);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2017-06-26 16:57:23 +07:00
|
|
|
static struct pblk_line *pblk_gc_get_victim_line(struct pblk *pblk,
|
|
|
|
struct list_head *group_list)
|
|
|
|
{
|
|
|
|
struct pblk_line *line, *victim;
|
2017-06-30 22:56:34 +07:00
|
|
|
int line_vsc, victim_vsc;
|
2017-06-26 16:57:23 +07:00
|
|
|
|
|
|
|
victim = list_first_entry(group_list, struct pblk_line, list);
|
|
|
|
list_for_each_entry(line, group_list, list) {
|
2017-06-30 22:56:34 +07:00
|
|
|
line_vsc = le32_to_cpu(*line->vsc);
|
|
|
|
victim_vsc = le32_to_cpu(*victim->vsc);
|
|
|
|
if (line_vsc < victim_vsc)
|
2017-06-26 16:57:23 +07:00
|
|
|
victim = line;
|
|
|
|
}
|
|
|
|
|
|
|
|
return victim;
|
|
|
|
}
|
|
|
|
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
static bool pblk_gc_should_run(struct pblk_gc *gc, struct pblk_rl *rl)
|
|
|
|
{
|
|
|
|
unsigned int nr_blocks_free, nr_blocks_need;
|
|
|
|
|
|
|
|
nr_blocks_need = pblk_rl_high_thrs(rl);
|
|
|
|
nr_blocks_free = pblk_rl_nr_free_blks(rl);
|
|
|
|
|
|
|
|
/* This is not critical, no need to take lock here */
|
|
|
|
return ((gc->gc_active) && (nr_blocks_need > nr_blocks_free));
|
|
|
|
}
|
|
|
|
|
2017-10-13 19:46:36 +07:00
|
|
|
void pblk_gc_free_full_lines(struct pblk *pblk)
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
{
|
|
|
|
struct pblk_line_mgmt *l_mg = &pblk->l_mg;
|
2017-10-13 19:46:41 +07:00
|
|
|
struct pblk_gc *gc = &pblk->gc;
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
struct pblk_line *line;
|
|
|
|
|
|
|
|
do {
|
|
|
|
spin_lock(&l_mg->gc_lock);
|
|
|
|
if (list_empty(&l_mg->gc_full_list)) {
|
|
|
|
spin_unlock(&l_mg->gc_lock);
|
2017-10-13 19:46:36 +07:00
|
|
|
return;
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
line = list_first_entry(&l_mg->gc_full_list,
|
|
|
|
struct pblk_line, list);
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
|
|
|
|
spin_lock(&line->lock);
|
|
|
|
WARN_ON(line->state != PBLK_LINESTATE_CLOSED);
|
|
|
|
line->state = PBLK_LINESTATE_GC;
|
|
|
|
spin_unlock(&line->lock);
|
|
|
|
|
|
|
|
list_del(&line->list);
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
spin_unlock(&l_mg->gc_lock);
|
|
|
|
|
2017-10-13 19:46:41 +07:00
|
|
|
atomic_inc(&gc->pipeline_gc);
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
kref_put(&line->ref, pblk_line_put);
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
} while (1);
|
2017-10-13 19:46:36 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Lines with no valid sectors will be returned to the free list immediately. If
|
|
|
|
* GC is activated - either because the free block count is under the determined
|
|
|
|
* threshold, or because it is being forced from user space - only lines with a
|
|
|
|
* high count of invalid sectors will be recycled.
|
|
|
|
*/
|
|
|
|
static void pblk_gc_run(struct pblk *pblk)
|
|
|
|
{
|
|
|
|
struct pblk_line_mgmt *l_mg = &pblk->l_mg;
|
|
|
|
struct pblk_gc *gc = &pblk->gc;
|
|
|
|
struct pblk_line *line;
|
|
|
|
struct list_head *group_list;
|
|
|
|
bool run_gc;
|
2017-10-13 19:46:41 +07:00
|
|
|
int read_inflight_gc, gc_group = 0, prev_group = 0;
|
2017-10-13 19:46:36 +07:00
|
|
|
|
|
|
|
pblk_gc_free_full_lines(pblk);
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
run_gc = pblk_gc_should_run(&pblk->gc, &pblk->rl);
|
2017-10-13 19:46:41 +07:00
|
|
|
if (!run_gc || (atomic_read(&gc->read_inflight_gc) >= PBLK_GC_L_QD))
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
return;
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
|
|
|
|
next_gc_group:
|
|
|
|
group_list = l_mg->gc_lists[gc_group++];
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
|
|
|
|
do {
|
|
|
|
spin_lock(&l_mg->gc_lock);
|
|
|
|
if (list_empty(group_list)) {
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
spin_unlock(&l_mg->gc_lock);
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
break;
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
}
|
|
|
|
|
2017-06-26 16:57:23 +07:00
|
|
|
line = pblk_gc_get_victim_line(pblk, group_list);
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
|
|
|
|
spin_lock(&line->lock);
|
|
|
|
WARN_ON(line->state != PBLK_LINESTATE_CLOSED);
|
|
|
|
line->state = PBLK_LINESTATE_GC;
|
|
|
|
spin_unlock(&line->lock);
|
|
|
|
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
list_del(&line->list);
|
|
|
|
spin_unlock(&l_mg->gc_lock);
|
|
|
|
|
|
|
|
spin_lock(&gc->r_lock);
|
|
|
|
list_add_tail(&line->list, &gc->r_list);
|
|
|
|
spin_unlock(&gc->r_lock);
|
|
|
|
|
2017-10-13 19:46:41 +07:00
|
|
|
read_inflight_gc = atomic_inc_return(&gc->read_inflight_gc);
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
pblk_gc_reader_kick(gc);
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
prev_group = 1;
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
/* No need to queue up more GC lines than we can handle */
|
|
|
|
run_gc = pblk_gc_should_run(&pblk->gc, &pblk->rl);
|
2017-10-13 19:46:41 +07:00
|
|
|
if (!run_gc || read_inflight_gc >= PBLK_GC_L_QD)
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
break;
|
|
|
|
} while (1);
|
|
|
|
|
|
|
|
if (!prev_group && pblk->rl.rb_state > gc_group &&
|
|
|
|
gc_group < PBLK_GC_NR_LISTS)
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
goto next_gc_group;
|
|
|
|
}
|
|
|
|
|
2017-10-18 11:10:19 +07:00
|
|
|
static void pblk_gc_timer(struct timer_list *t)
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
{
|
2017-10-18 11:10:19 +07:00
|
|
|
struct pblk *pblk = from_timer(pblk, t, gc.gc_timer);
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
|
|
|
|
pblk_gc_kick(pblk);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int pblk_gc_ts(void *data)
|
|
|
|
{
|
|
|
|
struct pblk *pblk = data;
|
|
|
|
|
|
|
|
while (!kthread_should_stop()) {
|
|
|
|
pblk_gc_run(pblk);
|
|
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
|
|
io_schedule();
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int pblk_gc_writer_ts(void *data)
|
|
|
|
{
|
|
|
|
struct pblk *pblk = data;
|
|
|
|
|
|
|
|
while (!kthread_should_stop()) {
|
|
|
|
if (!pblk_gc_write(pblk))
|
|
|
|
continue;
|
|
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
|
|
io_schedule();
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
static int pblk_gc_reader_ts(void *data)
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
{
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
struct pblk *pblk = data;
|
2017-10-13 19:46:41 +07:00
|
|
|
struct pblk_gc *gc = &pblk->gc;
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
while (!kthread_should_stop()) {
|
|
|
|
if (!pblk_gc_read(pblk))
|
|
|
|
continue;
|
|
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
|
|
io_schedule();
|
|
|
|
}
|
|
|
|
|
2017-10-13 19:46:41 +07:00
|
|
|
#ifdef CONFIG_NVM_DEBUG
|
|
|
|
pr_info("pblk: flushing gc pipeline, %d lines left\n",
|
|
|
|
atomic_read(&gc->pipeline_gc));
|
|
|
|
#endif
|
|
|
|
|
|
|
|
do {
|
|
|
|
if (!atomic_read(&gc->pipeline_gc))
|
|
|
|
break;
|
|
|
|
|
|
|
|
schedule();
|
|
|
|
} while (1);
|
|
|
|
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
return 0;
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
}
|
|
|
|
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
static void pblk_gc_start(struct pblk *pblk)
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
{
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
pblk->gc.gc_active = 1;
|
|
|
|
pr_debug("pblk: gc start\n");
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
}
|
|
|
|
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
void pblk_gc_should_start(struct pblk *pblk)
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
{
|
|
|
|
struct pblk_gc *gc = &pblk->gc;
|
|
|
|
|
2017-10-13 19:46:34 +07:00
|
|
|
if (gc->gc_enabled && !gc->gc_active) {
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
pblk_gc_start(pblk);
|
2017-10-13 19:46:34 +07:00
|
|
|
pblk_gc_kick(pblk);
|
|
|
|
}
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If flush_wq == 1 then no lock should be held by the caller since
|
|
|
|
* flush_workqueue can sleep
|
|
|
|
*/
|
|
|
|
static void pblk_gc_stop(struct pblk *pblk, int flush_wq)
|
|
|
|
{
|
|
|
|
pblk->gc.gc_active = 0;
|
|
|
|
pr_debug("pblk: gc stop\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
void pblk_gc_should_stop(struct pblk *pblk)
|
|
|
|
{
|
|
|
|
struct pblk_gc *gc = &pblk->gc;
|
|
|
|
|
|
|
|
if (gc->gc_active && !gc->gc_forced)
|
|
|
|
pblk_gc_stop(pblk, 0);
|
|
|
|
}
|
|
|
|
|
2017-10-13 19:46:37 +07:00
|
|
|
void pblk_gc_should_kick(struct pblk *pblk)
|
|
|
|
{
|
|
|
|
pblk_rl_update_rates(&pblk->rl);
|
|
|
|
}
|
|
|
|
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
void pblk_gc_sysfs_state_show(struct pblk *pblk, int *gc_enabled,
|
|
|
|
int *gc_active)
|
|
|
|
{
|
|
|
|
struct pblk_gc *gc = &pblk->gc;
|
|
|
|
|
|
|
|
spin_lock(&gc->lock);
|
|
|
|
*gc_enabled = gc->gc_enabled;
|
|
|
|
*gc_active = gc->gc_active;
|
|
|
|
spin_unlock(&gc->lock);
|
|
|
|
}
|
|
|
|
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
int pblk_gc_sysfs_force(struct pblk *pblk, int force)
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
{
|
|
|
|
struct pblk_gc *gc = &pblk->gc;
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
|
|
|
|
if (force < 0 || force > 1)
|
|
|
|
return -EINVAL;
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
|
|
|
|
spin_lock(&gc->lock);
|
|
|
|
gc->gc_forced = force;
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
|
|
|
|
if (force)
|
|
|
|
gc->gc_enabled = 1;
|
|
|
|
else
|
|
|
|
gc->gc_enabled = 0;
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
spin_unlock(&gc->lock);
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
|
|
|
|
pblk_gc_should_start(pblk);
|
|
|
|
|
|
|
|
return 0;
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
int pblk_gc_init(struct pblk *pblk)
|
|
|
|
{
|
|
|
|
struct pblk_gc *gc = &pblk->gc;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
gc->gc_ts = kthread_create(pblk_gc_ts, pblk, "pblk-gc-ts");
|
|
|
|
if (IS_ERR(gc->gc_ts)) {
|
|
|
|
pr_err("pblk: could not allocate GC main kthread\n");
|
|
|
|
return PTR_ERR(gc->gc_ts);
|
|
|
|
}
|
|
|
|
|
|
|
|
gc->gc_writer_ts = kthread_create(pblk_gc_writer_ts, pblk,
|
|
|
|
"pblk-gc-writer-ts");
|
|
|
|
if (IS_ERR(gc->gc_writer_ts)) {
|
|
|
|
pr_err("pblk: could not allocate GC writer kthread\n");
|
|
|
|
ret = PTR_ERR(gc->gc_writer_ts);
|
|
|
|
goto fail_free_main_kthread;
|
|
|
|
}
|
|
|
|
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
gc->gc_reader_ts = kthread_create(pblk_gc_reader_ts, pblk,
|
|
|
|
"pblk-gc-reader-ts");
|
|
|
|
if (IS_ERR(gc->gc_reader_ts)) {
|
|
|
|
pr_err("pblk: could not allocate GC reader kthread\n");
|
|
|
|
ret = PTR_ERR(gc->gc_reader_ts);
|
|
|
|
goto fail_free_writer_kthread;
|
|
|
|
}
|
|
|
|
|
2017-10-18 11:10:19 +07:00
|
|
|
timer_setup(&gc->gc_timer, pblk_gc_timer, 0);
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
mod_timer(&gc->gc_timer, jiffies + msecs_to_jiffies(GC_TIME_MSECS));
|
|
|
|
|
|
|
|
gc->gc_active = 0;
|
|
|
|
gc->gc_forced = 0;
|
|
|
|
gc->gc_enabled = 1;
|
|
|
|
gc->w_entries = 0;
|
2017-10-13 19:46:41 +07:00
|
|
|
atomic_set(&gc->read_inflight_gc, 0);
|
|
|
|
atomic_set(&gc->pipeline_gc, 0);
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
/* Workqueue that reads valid sectors from a line and submit them to the
|
|
|
|
* GC writer to be recycled.
|
|
|
|
*/
|
|
|
|
gc->gc_line_reader_wq = alloc_workqueue("pblk-gc-line-reader-wq",
|
|
|
|
WQ_MEM_RECLAIM | WQ_UNBOUND, PBLK_GC_MAX_READERS);
|
|
|
|
if (!gc->gc_line_reader_wq) {
|
|
|
|
pr_err("pblk: could not allocate GC line reader workqueue\n");
|
|
|
|
ret = -ENOMEM;
|
|
|
|
goto fail_free_reader_kthread;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Workqueue that prepare lines for GC */
|
|
|
|
gc->gc_reader_wq = alloc_workqueue("pblk-gc-line_wq",
|
|
|
|
WQ_MEM_RECLAIM | WQ_UNBOUND, 1);
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
if (!gc->gc_reader_wq) {
|
|
|
|
pr_err("pblk: could not allocate GC reader workqueue\n");
|
|
|
|
ret = -ENOMEM;
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
goto fail_free_reader_line_wq;
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
spin_lock_init(&gc->lock);
|
|
|
|
spin_lock_init(&gc->w_lock);
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
spin_lock_init(&gc->r_lock);
|
|
|
|
|
2017-10-13 19:46:11 +07:00
|
|
|
sema_init(&gc->gc_sem, PBLK_GC_RQ_QD);
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
INIT_LIST_HEAD(&gc->w_list);
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
INIT_LIST_HEAD(&gc->r_list);
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
fail_free_reader_line_wq:
|
|
|
|
destroy_workqueue(gc->gc_line_reader_wq);
|
|
|
|
fail_free_reader_kthread:
|
|
|
|
kthread_stop(gc->gc_reader_ts);
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
fail_free_writer_kthread:
|
|
|
|
kthread_stop(gc->gc_writer_ts);
|
2017-04-16 01:55:51 +07:00
|
|
|
fail_free_main_kthread:
|
|
|
|
kthread_stop(gc->gc_ts);
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
void pblk_gc_exit(struct pblk *pblk)
|
|
|
|
{
|
|
|
|
struct pblk_gc *gc = &pblk->gc;
|
|
|
|
|
2017-10-13 19:46:34 +07:00
|
|
|
gc->gc_enabled = 0;
|
|
|
|
del_timer_sync(&gc->gc_timer);
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
pblk_gc_stop(pblk, 1);
|
|
|
|
|
|
|
|
if (gc->gc_ts)
|
|
|
|
kthread_stop(gc->gc_ts);
|
|
|
|
|
2017-10-13 19:46:39 +07:00
|
|
|
if (gc->gc_reader_ts)
|
|
|
|
kthread_stop(gc->gc_reader_ts);
|
|
|
|
|
|
|
|
flush_workqueue(gc->gc_reader_wq);
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
if (gc->gc_reader_wq)
|
|
|
|
destroy_workqueue(gc->gc_reader_wq);
|
|
|
|
|
2017-10-13 19:46:39 +07:00
|
|
|
flush_workqueue(gc->gc_line_reader_wq);
|
lightnvm: pblk: redesign GC algorithm
At the moment, in order to get enough read parallelism, we have recycled
several lines at the same time. This approach has proven not to work
well when reaching capacity, since we end up mixing valid data from all
lines, thus not maintaining a sustainable free/recycled line ratio.
The new design, relies on a two level workqueue mechanism. In the first
level, we read the metadata for a number of lines based on the GC list
they reside on (this is governed by the number of valid sectors in each
line). In the second level, we recycle a single line at a time. Here, we
issue reads in parallel, while a single GC write thread places data in
the write buffer. This design allows to (i) only move data from one line
at a time, thus maintaining a sane free/recycled ration and (ii)
maintain the GC writer busy with recycled data.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-26 16:57:27 +07:00
|
|
|
if (gc->gc_line_reader_wq)
|
|
|
|
destroy_workqueue(gc->gc_line_reader_wq);
|
lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.
An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.
To manage the constraints, pblk maintains a logical to
physical address (L2P) table, write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.
The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.
The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.
pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.
Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.
This work also contains contributions from:
Matias Bjørling <matias@cnexlabs.com>
Simon A. F. Lund <slund@cnexlabs.com>
Young Tack Jin <youngtack.jin@gmail.com>
Huaicheng Li <huaicheng@cs.uchicago.edu>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 01:55:50 +07:00
|
|
|
|
|
|
|
if (gc->gc_writer_ts)
|
|
|
|
kthread_stop(gc->gc_writer_ts);
|
|
|
|
}
|