linux_dsm_epyc7002/drivers/acpi/arm64/iort.c

1124 lines
27 KiB
C
Raw Normal View History

ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-13 01:54:20 +07:00
/*
* Copyright (C) 2016, Semihalf
* Author: Tomasz Nowicki <tn@semihalf.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* This file implements early detection/parsing of I/O mapping
* reported to OS through firmware via I/O Remapping Table (IORT)
* IORT document number: ARM DEN 0049A
*/
#define pr_fmt(fmt) "ACPI: IORT: " fmt
#include <linux/acpi_iort.h>
#include <linux/iommu.h>
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-13 01:54:20 +07:00
#include <linux/kernel.h>
#include <linux/list.h>
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-13 01:54:20 +07:00
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-13 01:54:20 +07:00
#define IORT_TYPE_MASK(type) (1 << (type))
#define IORT_MSI_TYPE (1 << ACPI_IORT_NODE_ITS_GROUP)
#define IORT_IOMMU_TYPE ((1 << ACPI_IORT_NODE_SMMU) | \
(1 << ACPI_IORT_NODE_SMMU_V3))
struct iort_its_msi_chip {
struct list_head list;
struct fwnode_handle *fw_node;
u32 translation_id;
};
struct iort_fwnode {
struct list_head list;
struct acpi_iort_node *iort_node;
struct fwnode_handle *fwnode;
};
static LIST_HEAD(iort_fwnode_list);
static DEFINE_SPINLOCK(iort_fwnode_lock);
/**
* iort_set_fwnode() - Create iort_fwnode and use it to register
* iommu data in the iort_fwnode_list
*
* @node: IORT table node associated with the IOMMU
* @fwnode: fwnode associated with the IORT node
*
* Returns: 0 on success
* <0 on failure
*/
static inline int iort_set_fwnode(struct acpi_iort_node *iort_node,
struct fwnode_handle *fwnode)
{
struct iort_fwnode *np;
np = kzalloc(sizeof(struct iort_fwnode), GFP_ATOMIC);
if (WARN_ON(!np))
return -ENOMEM;
INIT_LIST_HEAD(&np->list);
np->iort_node = iort_node;
np->fwnode = fwnode;
spin_lock(&iort_fwnode_lock);
list_add_tail(&np->list, &iort_fwnode_list);
spin_unlock(&iort_fwnode_lock);
return 0;
}
/**
* iort_get_fwnode() - Retrieve fwnode associated with an IORT node
*
* @node: IORT table node to be looked-up
*
* Returns: fwnode_handle pointer on success, NULL on failure
*/
static inline
struct fwnode_handle *iort_get_fwnode(struct acpi_iort_node *node)
{
struct iort_fwnode *curr;
struct fwnode_handle *fwnode = NULL;
spin_lock(&iort_fwnode_lock);
list_for_each_entry(curr, &iort_fwnode_list, list) {
if (curr->iort_node == node) {
fwnode = curr->fwnode;
break;
}
}
spin_unlock(&iort_fwnode_lock);
return fwnode;
}
/**
* iort_delete_fwnode() - Delete fwnode associated with an IORT node
*
* @node: IORT table node associated with fwnode to delete
*/
static inline void iort_delete_fwnode(struct acpi_iort_node *node)
{
struct iort_fwnode *curr, *tmp;
spin_lock(&iort_fwnode_lock);
list_for_each_entry_safe(curr, tmp, &iort_fwnode_list, list) {
if (curr->iort_node == node) {
list_del(&curr->list);
kfree(curr);
break;
}
}
spin_unlock(&iort_fwnode_lock);
}
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-13 01:54:20 +07:00
typedef acpi_status (*iort_find_node_callback)
(struct acpi_iort_node *node, void *context);
/* Root pointer to the mapped IORT table */
static struct acpi_table_header *iort_table;
static LIST_HEAD(iort_msi_chip_list);
static DEFINE_SPINLOCK(iort_msi_chip_lock);
/**
* iort_register_domain_token() - register domain token and related ITS ID
* to the list from where we can get it back later on.
* @trans_id: ITS ID.
* @fw_node: Domain token.
*
* Returns: 0 on success, -ENOMEM if no memory when allocating list element
*/
int iort_register_domain_token(int trans_id, struct fwnode_handle *fw_node)
{
struct iort_its_msi_chip *its_msi_chip;
its_msi_chip = kzalloc(sizeof(*its_msi_chip), GFP_KERNEL);
if (!its_msi_chip)
return -ENOMEM;
its_msi_chip->fw_node = fw_node;
its_msi_chip->translation_id = trans_id;
spin_lock(&iort_msi_chip_lock);
list_add(&its_msi_chip->list, &iort_msi_chip_list);
spin_unlock(&iort_msi_chip_lock);
return 0;
}
/**
* iort_deregister_domain_token() - Deregister domain token based on ITS ID
* @trans_id: ITS ID.
*
* Returns: none.
*/
void iort_deregister_domain_token(int trans_id)
{
struct iort_its_msi_chip *its_msi_chip, *t;
spin_lock(&iort_msi_chip_lock);
list_for_each_entry_safe(its_msi_chip, t, &iort_msi_chip_list, list) {
if (its_msi_chip->translation_id == trans_id) {
list_del(&its_msi_chip->list);
kfree(its_msi_chip);
break;
}
}
spin_unlock(&iort_msi_chip_lock);
}
/**
* iort_find_domain_token() - Find domain token based on given ITS ID
* @trans_id: ITS ID.
*
* Returns: domain token when find on the list, NULL otherwise
*/
struct fwnode_handle *iort_find_domain_token(int trans_id)
{
struct fwnode_handle *fw_node = NULL;
struct iort_its_msi_chip *its_msi_chip;
spin_lock(&iort_msi_chip_lock);
list_for_each_entry(its_msi_chip, &iort_msi_chip_list, list) {
if (its_msi_chip->translation_id == trans_id) {
fw_node = its_msi_chip->fw_node;
break;
}
}
spin_unlock(&iort_msi_chip_lock);
return fw_node;
}
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-13 01:54:20 +07:00
static struct acpi_iort_node *iort_scan_node(enum acpi_iort_node_type type,
iort_find_node_callback callback,
void *context)
{
struct acpi_iort_node *iort_node, *iort_end;
struct acpi_table_iort *iort;
int i;
if (!iort_table)
return NULL;
/* Get the first IORT node */
iort = (struct acpi_table_iort *)iort_table;
iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort,
iort->node_offset);
iort_end = ACPI_ADD_PTR(struct acpi_iort_node, iort_table,
iort_table->length);
for (i = 0; i < iort->node_count; i++) {
if (WARN_TAINT(iort_node >= iort_end, TAINT_FIRMWARE_WORKAROUND,
"IORT node pointer overflows, bad table!\n"))
return NULL;
if (iort_node->type == type &&
ACPI_SUCCESS(callback(iort_node, context)))
return iort_node;
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-13 01:54:20 +07:00
iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort_node,
iort_node->length);
}
return NULL;
}
static acpi_status
iort_match_type_callback(struct acpi_iort_node *node, void *context)
{
return AE_OK;
}
bool iort_node_match(u8 type)
{
struct acpi_iort_node *node;
node = iort_scan_node(type, iort_match_type_callback, NULL);
return node != NULL;
}
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-13 01:54:20 +07:00
static acpi_status iort_match_node_callback(struct acpi_iort_node *node,
void *context)
{
struct device *dev = context;
acpi_status status = AE_NOT_FOUND;
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-13 01:54:20 +07:00
if (node->type == ACPI_IORT_NODE_NAMED_COMPONENT) {
struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL };
struct acpi_device *adev = to_acpi_device_node(dev->fwnode);
struct acpi_iort_named_component *ncomp;
if (!adev)
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-13 01:54:20 +07:00
goto out;
status = acpi_get_name(adev->handle, ACPI_FULL_PATHNAME, &buf);
if (ACPI_FAILURE(status)) {
dev_warn(dev, "Can't get device full path name\n");
goto out;
}
ncomp = (struct acpi_iort_named_component *)node->node_data;
status = !strcmp(ncomp->device_name, buf.pointer) ?
AE_OK : AE_NOT_FOUND;
acpi_os_free(buf.pointer);
} else if (node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) {
struct acpi_iort_root_complex *pci_rc;
struct pci_bus *bus;
bus = to_pci_bus(dev);
pci_rc = (struct acpi_iort_root_complex *)node->node_data;
/*
* It is assumed that PCI segment numbers maps one-to-one
* with root complexes. Each segment number can represent only
* one root complex.
*/
status = pci_rc->pci_segment_number == pci_domain_nr(bus) ?
AE_OK : AE_NOT_FOUND;
}
out:
return status;
}
static int iort_id_map(struct acpi_iort_id_mapping *map, u8 type, u32 rid_in,
u32 *rid_out)
{
/* Single mapping does not care for input id */
if (map->flags & ACPI_IORT_ID_SINGLE_MAPPING) {
if (type == ACPI_IORT_NODE_NAMED_COMPONENT ||
type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) {
*rid_out = map->output_base;
return 0;
}
pr_warn(FW_BUG "[map %p] SINGLE MAPPING flag not allowed for node type %d, skipping ID map\n",
map, type);
return -ENXIO;
}
if (rid_in < map->input_base ||
(rid_in >= map->input_base + map->id_count))
return -ENXIO;
*rid_out = map->output_base + (rid_in - map->input_base);
return 0;
}
static
struct acpi_iort_node *iort_node_get_id(struct acpi_iort_node *node,
u32 *id_out, int index)
{
struct acpi_iort_node *parent;
struct acpi_iort_id_mapping *map;
if (!node->mapping_offset || !node->mapping_count ||
index >= node->mapping_count)
return NULL;
map = ACPI_ADD_PTR(struct acpi_iort_id_mapping, node,
ACPI/IORT: Fix iort_node_get_id() mapping entries indexing Commit 618f535a6062 ("ACPI/IORT: Add single mapping function") introduced a function (iort_node_get_id()) to retrieve ids for IORT named components. The iort_node_get_id() takes an index as input to refer to a specific mapping entry in the named component IORT node mapping array. For a mapping entry at a given index, iort_node_get_id() should return the id value (through the id_out function parameter) and the IORT node output_reference (through function return value) the given mapping entry refers to. Technically output_reference values may differ for different map entries, (see diagram below - mapped id values may refer to different eg IORT SMMU nodes; the kernel may not be able to handle different output_reference values for a given named component but the IORT kernel layer should still report the IORT mappings as reported by firmware) but current code in iort_node_get_id() fails to use the index function parameter to return the correct output_reference value (ie it always returns the output_reference value of the first entry in the mapping array whilst using the index correctly to retrieve the id value from the respective entry). |----------------------| | named component | |----------------------| | map entry[0] | |----------------------| | id value | | output_reference----------------> eg SMMU 1 |----------------------| | map entry[1] | |----------------------| | id value | | output_reference----------------> eg SMMU 2 |----------------------| . . . |----------------------| | map entry[N] | |----------------------| | id value | | output_reference----------------> eg SMMU 1 |----------------------| Consequently the iort_node_get_id() function always returns the IORT node pointed at by the output_reference value of the first named component mapping array entry, irrespective of the index parameter, which is a bug. Update the map array entry pointer computation in iort_node_get_id() to take into account the index value, fixing the issue. Fixes: 618f535a6062 ("ACPI/IORT: Add single mapping function") Reported-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Sinan Kaya <okaya@codeaurora.org> Cc: Tomasz Nowicki <tn@semihalf.com> Cc: Nate Watterson <nwatters@codeaurora.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-01-06 00:32:16 +07:00
node->mapping_offset + index * sizeof(*map));
/* Firmware bug! */
if (!map->output_reference) {
pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n",
node, node->type);
return NULL;
}
parent = ACPI_ADD_PTR(struct acpi_iort_node, iort_table,
map->output_reference);
ACPI/IORT: Fix iort_node_get_id() mapping entries indexing Commit 618f535a6062 ("ACPI/IORT: Add single mapping function") introduced a function (iort_node_get_id()) to retrieve ids for IORT named components. The iort_node_get_id() takes an index as input to refer to a specific mapping entry in the named component IORT node mapping array. For a mapping entry at a given index, iort_node_get_id() should return the id value (through the id_out function parameter) and the IORT node output_reference (through function return value) the given mapping entry refers to. Technically output_reference values may differ for different map entries, (see diagram below - mapped id values may refer to different eg IORT SMMU nodes; the kernel may not be able to handle different output_reference values for a given named component but the IORT kernel layer should still report the IORT mappings as reported by firmware) but current code in iort_node_get_id() fails to use the index function parameter to return the correct output_reference value (ie it always returns the output_reference value of the first entry in the mapping array whilst using the index correctly to retrieve the id value from the respective entry). |----------------------| | named component | |----------------------| | map entry[0] | |----------------------| | id value | | output_reference----------------> eg SMMU 1 |----------------------| | map entry[1] | |----------------------| | id value | | output_reference----------------> eg SMMU 2 |----------------------| . . . |----------------------| | map entry[N] | |----------------------| | id value | | output_reference----------------> eg SMMU 1 |----------------------| Consequently the iort_node_get_id() function always returns the IORT node pointed at by the output_reference value of the first named component mapping array entry, irrespective of the index parameter, which is a bug. Update the map array entry pointer computation in iort_node_get_id() to take into account the index value, fixing the issue. Fixes: 618f535a6062 ("ACPI/IORT: Add single mapping function") Reported-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Sinan Kaya <okaya@codeaurora.org> Cc: Tomasz Nowicki <tn@semihalf.com> Cc: Nate Watterson <nwatters@codeaurora.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-01-06 00:32:16 +07:00
if (map->flags & ACPI_IORT_ID_SINGLE_MAPPING) {
if (node->type == ACPI_IORT_NODE_NAMED_COMPONENT ||
node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) {
ACPI/IORT: Fix iort_node_get_id() mapping entries indexing Commit 618f535a6062 ("ACPI/IORT: Add single mapping function") introduced a function (iort_node_get_id()) to retrieve ids for IORT named components. The iort_node_get_id() takes an index as input to refer to a specific mapping entry in the named component IORT node mapping array. For a mapping entry at a given index, iort_node_get_id() should return the id value (through the id_out function parameter) and the IORT node output_reference (through function return value) the given mapping entry refers to. Technically output_reference values may differ for different map entries, (see diagram below - mapped id values may refer to different eg IORT SMMU nodes; the kernel may not be able to handle different output_reference values for a given named component but the IORT kernel layer should still report the IORT mappings as reported by firmware) but current code in iort_node_get_id() fails to use the index function parameter to return the correct output_reference value (ie it always returns the output_reference value of the first entry in the mapping array whilst using the index correctly to retrieve the id value from the respective entry). |----------------------| | named component | |----------------------| | map entry[0] | |----------------------| | id value | | output_reference----------------> eg SMMU 1 |----------------------| | map entry[1] | |----------------------| | id value | | output_reference----------------> eg SMMU 2 |----------------------| . . . |----------------------| | map entry[N] | |----------------------| | id value | | output_reference----------------> eg SMMU 1 |----------------------| Consequently the iort_node_get_id() function always returns the IORT node pointed at by the output_reference value of the first named component mapping array entry, irrespective of the index parameter, which is a bug. Update the map array entry pointer computation in iort_node_get_id() to take into account the index value, fixing the issue. Fixes: 618f535a6062 ("ACPI/IORT: Add single mapping function") Reported-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Sinan Kaya <okaya@codeaurora.org> Cc: Tomasz Nowicki <tn@semihalf.com> Cc: Nate Watterson <nwatters@codeaurora.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-01-06 00:32:16 +07:00
*id_out = map->output_base;
return parent;
}
}
return NULL;
}
static struct acpi_iort_node *iort_node_map_id(struct acpi_iort_node *node,
u32 id_in, u32 *id_out,
u8 type_mask)
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-13 01:54:20 +07:00
{
u32 id = id_in;
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-13 01:54:20 +07:00
/* Parse the ID mapping tree to find specified node type */
while (node) {
struct acpi_iort_id_mapping *map;
int i;
if (IORT_TYPE_MASK(node->type) & type_mask) {
if (id_out)
*id_out = id;
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-13 01:54:20 +07:00
return node;
}
if (!node->mapping_offset || !node->mapping_count)
goto fail_map;
map = ACPI_ADD_PTR(struct acpi_iort_id_mapping, node,
node->mapping_offset);
/* Firmware bug! */
if (!map->output_reference) {
pr_err(FW_BUG "[node %p type %d] ID map has NULL parent reference\n",
node, node->type);
goto fail_map;
}
/* Do the ID translation */
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-13 01:54:20 +07:00
for (i = 0; i < node->mapping_count; i++, map++) {
if (!iort_id_map(map, node->type, id, &id))
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-13 01:54:20 +07:00
break;
}
if (i == node->mapping_count)
goto fail_map;
node = ACPI_ADD_PTR(struct acpi_iort_node, iort_table,
map->output_reference);
}
fail_map:
/* Map input ID to output ID unchanged on mapping failure */
if (id_out)
*id_out = id_in;
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-13 01:54:20 +07:00
return NULL;
}
static
struct acpi_iort_node *iort_node_map_platform_id(struct acpi_iort_node *node,
u32 *id_out, u8 type_mask,
int index)
{
struct acpi_iort_node *parent;
u32 id;
/* step 1: retrieve the initial dev id */
parent = iort_node_get_id(node, &id, index);
if (!parent)
return NULL;
/*
* optional step 2: map the initial dev id if its parent is not
* the target type we want, map it again for the use cases such
* as NC (named component) -> SMMU -> ITS. If the type is matched,
* return the initial dev id and its parent pointer directly.
*/
if (!(IORT_TYPE_MASK(parent->type) & type_mask))
parent = iort_node_map_id(parent, id, id_out, type_mask);
else
if (id_out)
*id_out = id;
return parent;
}
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-13 01:54:20 +07:00
static struct acpi_iort_node *iort_find_dev_node(struct device *dev)
{
struct pci_bus *pbus;
if (!dev_is_pci(dev))
return iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT,
iort_match_node_callback, dev);
/* Find a PCI root bus */
pbus = to_pci_dev(dev)->bus;
while (!pci_is_root_bus(pbus))
pbus = pbus->parent;
return iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX,
iort_match_node_callback, &pbus->dev);
}
/**
* iort_msi_map_rid() - Map a MSI requester ID for a device
* @dev: The device for which the mapping is to be done.
* @req_id: The device requester ID.
*
* Returns: mapped MSI RID on success, input requester ID otherwise
*/
u32 iort_msi_map_rid(struct device *dev, u32 req_id)
{
struct acpi_iort_node *node;
u32 dev_id;
node = iort_find_dev_node(dev);
if (!node)
return req_id;
iort_node_map_id(node, req_id, &dev_id, IORT_MSI_TYPE);
return dev_id;
}
/**
* iort_pmsi_get_dev_id() - Get the device id for a device
* @dev: The device for which the mapping is to be done.
* @dev_id: The device ID found.
*
* Returns: 0 for successful find a dev id, -ENODEV on error
*/
int iort_pmsi_get_dev_id(struct device *dev, u32 *dev_id)
{
int i;
struct acpi_iort_node *node;
node = iort_find_dev_node(dev);
if (!node)
return -ENODEV;
for (i = 0; i < node->mapping_count; i++) {
if (iort_node_map_platform_id(node, dev_id, IORT_MSI_TYPE, i))
return 0;
}
return -ENODEV;
}
/**
* iort_dev_find_its_id() - Find the ITS identifier for a device
* @dev: The device.
* @req_id: Device's requester ID
* @idx: Index of the ITS identifier list.
* @its_id: ITS identifier.
*
* Returns: 0 on success, appropriate error value otherwise
*/
static int iort_dev_find_its_id(struct device *dev, u32 req_id,
unsigned int idx, int *its_id)
{
struct acpi_iort_its_group *its;
struct acpi_iort_node *node;
node = iort_find_dev_node(dev);
if (!node)
return -ENXIO;
node = iort_node_map_id(node, req_id, NULL, IORT_MSI_TYPE);
if (!node)
return -ENXIO;
/* Move to ITS specific data */
its = (struct acpi_iort_its_group *)node->node_data;
if (idx > its->its_count) {
dev_err(dev, "requested ITS ID index [%d] is greater than available [%d]\n",
idx, its->its_count);
return -ENXIO;
}
*its_id = its->identifiers[idx];
return 0;
}
/**
* iort_get_device_domain() - Find MSI domain related to a device
* @dev: The device.
* @req_id: Requester ID for the device.
*
* Returns: the MSI domain for this device, NULL otherwise
*/
struct irq_domain *iort_get_device_domain(struct device *dev, u32 req_id)
{
struct fwnode_handle *handle;
int its_id;
if (iort_dev_find_its_id(dev, req_id, 0, &its_id))
return NULL;
handle = iort_find_domain_token(its_id);
if (!handle)
return NULL;
return irq_find_matching_fwnode(handle, DOMAIN_BUS_PCI_MSI);
}
/**
* iort_get_platform_device_domain() - Find MSI domain related to a
* platform device
* @dev: the dev pointer associated with the platform device
*
* Returns: the MSI domain for this device, NULL otherwise
*/
static struct irq_domain *iort_get_platform_device_domain(struct device *dev)
{
struct acpi_iort_node *node, *msi_parent;
struct fwnode_handle *iort_fwnode;
struct acpi_iort_its_group *its;
int i;
/* find its associated iort node */
node = iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT,
iort_match_node_callback, dev);
if (!node)
return NULL;
/* then find its msi parent node */
for (i = 0; i < node->mapping_count; i++) {
msi_parent = iort_node_map_platform_id(node, NULL,
IORT_MSI_TYPE, i);
if (msi_parent)
break;
}
if (!msi_parent)
return NULL;
/* Move to ITS specific data */
its = (struct acpi_iort_its_group *)msi_parent->node_data;
iort_fwnode = iort_find_domain_token(its->identifiers[0]);
if (!iort_fwnode)
return NULL;
return irq_find_matching_fwnode(iort_fwnode, DOMAIN_BUS_PLATFORM_MSI);
}
void acpi_configure_pmsi_domain(struct device *dev)
{
struct irq_domain *msi_domain;
msi_domain = iort_get_platform_device_domain(dev);
if (msi_domain)
dev_set_msi_domain(dev, msi_domain);
}
static int __get_pci_rid(struct pci_dev *pdev, u16 alias, void *data)
{
u32 *rid = data;
*rid = alias;
return 0;
}
static int arm_smmu_iort_xlate(struct device *dev, u32 streamid,
struct fwnode_handle *fwnode,
const struct iommu_ops *ops)
{
int ret = iommu_fwspec_init(dev, fwnode, ops);
if (!ret)
ret = iommu_fwspec_add_ids(dev, &streamid, 1);
return ret;
}
static inline bool iort_iommu_driver_enabled(u8 type)
{
switch (type) {
case ACPI_IORT_NODE_SMMU_V3:
return IS_BUILTIN(CONFIG_ARM_SMMU_V3);
case ACPI_IORT_NODE_SMMU:
return IS_BUILTIN(CONFIG_ARM_SMMU);
default:
pr_warn("IORT node type %u does not describe an SMMU\n", type);
return false;
}
}
#ifdef CONFIG_IOMMU_API
static inline
const struct iommu_ops *iort_fwspec_iommu_ops(struct iommu_fwspec *fwspec)
{
return (fwspec && fwspec->ops) ? fwspec->ops : NULL;
}
static inline
int iort_add_device_replay(const struct iommu_ops *ops, struct device *dev)
{
int err = 0;
if (!IS_ERR_OR_NULL(ops) && ops->add_device && dev->bus &&
!dev->iommu_group)
err = ops->add_device(dev);
return err;
}
#else
static inline
const struct iommu_ops *iort_fwspec_iommu_ops(struct iommu_fwspec *fwspec)
{ return NULL; }
static inline
int iort_add_device_replay(const struct iommu_ops *ops, struct device *dev)
{ return 0; }
#endif
static const struct iommu_ops *iort_iommu_xlate(struct device *dev,
struct acpi_iort_node *node,
u32 streamid)
{
const struct iommu_ops *ops = NULL;
int ret = -ENODEV;
struct fwnode_handle *iort_fwnode;
/*
* If we already translated the fwspec there
* is nothing left to do, return the iommu_ops.
*/
ops = iort_fwspec_iommu_ops(dev->iommu_fwspec);
if (ops)
return ops;
if (node) {
iort_fwnode = iort_get_fwnode(node);
if (!iort_fwnode)
return NULL;
ops = iommu_ops_from_fwnode(iort_fwnode);
/*
* If the ops look-up fails, this means that either
* the SMMU drivers have not been probed yet or that
* the SMMU drivers are not built in the kernel;
* Depending on whether the SMMU drivers are built-in
* in the kernel or not, defer the IOMMU configuration
* or just abort it.
*/
if (!ops)
return iort_iommu_driver_enabled(node->type) ?
ERR_PTR(-EPROBE_DEFER) : NULL;
ret = arm_smmu_iort_xlate(dev, streamid, iort_fwnode, ops);
}
return ret ? NULL : ops;
}
ACPI/IORT: Make dma masks set-up IORT specific The introduction of acpi_dma_configure() allows to configure DMA and related IOMMU for any device that is DMA capable. To achieve that goal it ensures DMA masks are set-up to sane default values before proceeding with IOMMU and DMA ops configuration. On x86/ia64 systems, through acpi_bind_one(), acpi_dma_configure() is called for every device that has an ACPI companion, in that every device is considered DMA capable on x86/ia64 systems (ie acpi_get_dma_attr() API), which has the side effect of initializing dma masks also for pseudo-devices (eg CPUs and memory nodes) and potentially for devices whose dma masks were not set-up before the acpi_dma_configure() API was introduced, which may have noxious side effects. Therefore, in preparation for IORT firmware specific DMA masks set-up, wrap the default DMA masks set-up in acpi_dma_configure() inside an IORT specific wrapper that reverts to a NOP on x86/ia64 systems, restoring the default expected behaviour on x86/ia64 systems and keeping DMA default masks set-up on IORT based (ie ARM) arch configurations. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Tomasz Nowicki <tn@semihalf.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-12-06 21:20:11 +07:00
/**
* iort_set_dma_mask - Set-up dma mask for a device.
*
* @dev: device to configure
*/
void iort_set_dma_mask(struct device *dev)
{
/*
* Set default coherent_dma_mask to 32 bit. Drivers are expected to
* setup the correct supported mask.
*/
if (!dev->coherent_dma_mask)
dev->coherent_dma_mask = DMA_BIT_MASK(32);
/*
* Set it to coherent_dma_mask by default if the architecture
* code has not set it.
*/
if (!dev->dma_mask)
dev->dma_mask = &dev->coherent_dma_mask;
}
/**
* iort_iommu_configure - Set-up IOMMU configuration for a device.
*
* @dev: device to configure
*
* Returns: iommu_ops pointer on configuration success
* NULL on configuration failure
*/
const struct iommu_ops *iort_iommu_configure(struct device *dev)
{
struct acpi_iort_node *node, *parent;
const struct iommu_ops *ops = NULL;
u32 streamid = 0;
int err;
if (dev_is_pci(dev)) {
struct pci_bus *bus = to_pci_dev(dev)->bus;
u32 rid;
pci_for_each_dma_alias(to_pci_dev(dev), __get_pci_rid,
&rid);
node = iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX,
iort_match_node_callback, &bus->dev);
if (!node)
return NULL;
parent = iort_node_map_id(node, rid, &streamid,
IORT_IOMMU_TYPE);
ops = iort_iommu_xlate(dev, parent, streamid);
} else {
int i = 0;
node = iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT,
iort_match_node_callback, dev);
if (!node)
return NULL;
parent = iort_node_map_platform_id(node, &streamid,
IORT_IOMMU_TYPE, i++);
while (parent) {
ops = iort_iommu_xlate(dev, parent, streamid);
if (IS_ERR_OR_NULL(ops))
return ops;
parent = iort_node_map_platform_id(node, &streamid,
IORT_IOMMU_TYPE,
i++);
}
}
/*
* If we have reason to believe the IOMMU driver missed the initial
* add_device callback for dev, replay it to get things in order.
*/
err = iort_add_device_replay(ops, dev);
if (err)
ops = ERR_PTR(err);
return ops;
}
static void __init acpi_iort_register_irq(int hwirq, const char *name,
int trigger,
struct resource *res)
{
int irq = acpi_register_gsi(NULL, hwirq, trigger,
ACPI_ACTIVE_HIGH);
if (irq <= 0) {
pr_err("could not register gsi hwirq %d name [%s]\n", hwirq,
name);
return;
}
res->start = irq;
res->end = irq;
res->flags = IORESOURCE_IRQ;
res->name = name;
}
static int __init arm_smmu_v3_count_resources(struct acpi_iort_node *node)
{
struct acpi_iort_smmu_v3 *smmu;
/* Always present mem resource */
int num_res = 1;
/* Retrieve SMMUv3 specific data */
smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
if (smmu->event_gsiv)
num_res++;
if (smmu->pri_gsiv)
num_res++;
if (smmu->gerr_gsiv)
num_res++;
if (smmu->sync_gsiv)
num_res++;
return num_res;
}
static void __init arm_smmu_v3_init_resources(struct resource *res,
struct acpi_iort_node *node)
{
struct acpi_iort_smmu_v3 *smmu;
int num_res = 0;
/* Retrieve SMMUv3 specific data */
smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
res[num_res].start = smmu->base_address;
res[num_res].end = smmu->base_address + SZ_128K - 1;
res[num_res].flags = IORESOURCE_MEM;
num_res++;
if (smmu->event_gsiv)
acpi_iort_register_irq(smmu->event_gsiv, "eventq",
ACPI_EDGE_SENSITIVE,
&res[num_res++]);
if (smmu->pri_gsiv)
acpi_iort_register_irq(smmu->pri_gsiv, "priq",
ACPI_EDGE_SENSITIVE,
&res[num_res++]);
if (smmu->gerr_gsiv)
acpi_iort_register_irq(smmu->gerr_gsiv, "gerror",
ACPI_EDGE_SENSITIVE,
&res[num_res++]);
if (smmu->sync_gsiv)
acpi_iort_register_irq(smmu->sync_gsiv, "cmdq-sync",
ACPI_EDGE_SENSITIVE,
&res[num_res++]);
}
static bool __init arm_smmu_v3_is_coherent(struct acpi_iort_node *node)
{
struct acpi_iort_smmu_v3 *smmu;
/* Retrieve SMMUv3 specific data */
smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
return smmu->flags & ACPI_IORT_SMMU_V3_COHACC_OVERRIDE;
}
static int __init arm_smmu_count_resources(struct acpi_iort_node *node)
{
struct acpi_iort_smmu *smmu;
/* Retrieve SMMU specific data */
smmu = (struct acpi_iort_smmu *)node->node_data;
/*
* Only consider the global fault interrupt and ignore the
* configuration access interrupt.
*
* MMIO address and global fault interrupt resources are always
* present so add them to the context interrupt count as a static
* value.
*/
return smmu->context_interrupt_count + 2;
}
static void __init arm_smmu_init_resources(struct resource *res,
struct acpi_iort_node *node)
{
struct acpi_iort_smmu *smmu;
int i, hw_irq, trigger, num_res = 0;
u64 *ctx_irq, *glb_irq;
/* Retrieve SMMU specific data */
smmu = (struct acpi_iort_smmu *)node->node_data;
res[num_res].start = smmu->base_address;
res[num_res].end = smmu->base_address + smmu->span - 1;
res[num_res].flags = IORESOURCE_MEM;
num_res++;
glb_irq = ACPI_ADD_PTR(u64, node, smmu->global_interrupt_offset);
/* Global IRQs */
hw_irq = IORT_IRQ_MASK(glb_irq[0]);
trigger = IORT_IRQ_TRIGGER_MASK(glb_irq[0]);
acpi_iort_register_irq(hw_irq, "arm-smmu-global", trigger,
&res[num_res++]);
/* Context IRQs */
ctx_irq = ACPI_ADD_PTR(u64, node, smmu->context_interrupt_offset);
for (i = 0; i < smmu->context_interrupt_count; i++) {
hw_irq = IORT_IRQ_MASK(ctx_irq[i]);
trigger = IORT_IRQ_TRIGGER_MASK(ctx_irq[i]);
acpi_iort_register_irq(hw_irq, "arm-smmu-context", trigger,
&res[num_res++]);
}
}
static bool __init arm_smmu_is_coherent(struct acpi_iort_node *node)
{
struct acpi_iort_smmu *smmu;
/* Retrieve SMMU specific data */
smmu = (struct acpi_iort_smmu *)node->node_data;
return smmu->flags & ACPI_IORT_SMMU_COHERENT_WALK;
}
struct iort_iommu_config {
const char *name;
int (*iommu_init)(struct acpi_iort_node *node);
bool (*iommu_is_coherent)(struct acpi_iort_node *node);
int (*iommu_count_resources)(struct acpi_iort_node *node);
void (*iommu_init_resources)(struct resource *res,
struct acpi_iort_node *node);
};
static const struct iort_iommu_config iort_arm_smmu_v3_cfg __initconst = {
.name = "arm-smmu-v3",
.iommu_is_coherent = arm_smmu_v3_is_coherent,
.iommu_count_resources = arm_smmu_v3_count_resources,
.iommu_init_resources = arm_smmu_v3_init_resources
};
static const struct iort_iommu_config iort_arm_smmu_cfg __initconst = {
.name = "arm-smmu",
.iommu_is_coherent = arm_smmu_is_coherent,
.iommu_count_resources = arm_smmu_count_resources,
.iommu_init_resources = arm_smmu_init_resources
};
static __init
const struct iort_iommu_config *iort_get_iommu_cfg(struct acpi_iort_node *node)
{
switch (node->type) {
case ACPI_IORT_NODE_SMMU_V3:
return &iort_arm_smmu_v3_cfg;
case ACPI_IORT_NODE_SMMU:
return &iort_arm_smmu_cfg;
default:
return NULL;
}
}
/**
* iort_add_smmu_platform_device() - Allocate a platform device for SMMU
* @node: Pointer to SMMU ACPI IORT node
*
* Returns: 0 on success, <0 failure
*/
static int __init iort_add_smmu_platform_device(struct acpi_iort_node *node)
{
struct fwnode_handle *fwnode;
struct platform_device *pdev;
struct resource *r;
enum dev_dma_attr attr;
int ret, count;
const struct iort_iommu_config *ops = iort_get_iommu_cfg(node);
if (!ops)
return -ENODEV;
pdev = platform_device_alloc(ops->name, PLATFORM_DEVID_AUTO);
if (!pdev)
return -ENOMEM;
count = ops->iommu_count_resources(node);
r = kcalloc(count, sizeof(*r), GFP_KERNEL);
if (!r) {
ret = -ENOMEM;
goto dev_put;
}
ops->iommu_init_resources(r, node);
ret = platform_device_add_resources(pdev, r, count);
/*
* Resources are duplicated in platform_device_add_resources,
* free their allocated memory
*/
kfree(r);
if (ret)
goto dev_put;
/*
* Add a copy of IORT node pointer to platform_data to
* be used to retrieve IORT data information.
*/
ret = platform_device_add_data(pdev, &node, sizeof(node));
if (ret)
goto dev_put;
/*
* We expect the dma masks to be equivalent for
* all SMMUs set-ups
*/
pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
fwnode = iort_get_fwnode(node);
if (!fwnode) {
ret = -ENODEV;
goto dev_put;
}
pdev->dev.fwnode = fwnode;
attr = ops->iommu_is_coherent(node) ?
DEV_DMA_COHERENT : DEV_DMA_NON_COHERENT;
/* Configure DMA for the page table walker */
acpi_dma_configure(&pdev->dev, attr);
ret = platform_device_add(pdev);
if (ret)
goto dma_deconfigure;
return 0;
dma_deconfigure:
acpi_dma_deconfigure(&pdev->dev);
dev_put:
platform_device_put(pdev);
return ret;
}
static void __init iort_init_platform_devices(void)
{
struct acpi_iort_node *iort_node, *iort_end;
struct acpi_table_iort *iort;
struct fwnode_handle *fwnode;
int i, ret;
/*
* iort_table and iort both point to the start of IORT table, but
* have different struct types
*/
iort = (struct acpi_table_iort *)iort_table;
/* Get the first IORT node */
iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort,
iort->node_offset);
iort_end = ACPI_ADD_PTR(struct acpi_iort_node, iort,
iort_table->length);
for (i = 0; i < iort->node_count; i++) {
if (iort_node >= iort_end) {
pr_err("iort node pointer overflows, bad table\n");
return;
}
if ((iort_node->type == ACPI_IORT_NODE_SMMU) ||
(iort_node->type == ACPI_IORT_NODE_SMMU_V3)) {
fwnode = acpi_alloc_fwnode_static();
if (!fwnode)
return;
iort_set_fwnode(iort_node, fwnode);
ret = iort_add_smmu_platform_device(iort_node);
if (ret) {
iort_delete_fwnode(iort_node);
acpi_free_fwnode_static(fwnode);
return;
}
}
iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort_node,
iort_node->length);
}
}
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-13 01:54:20 +07:00
void __init acpi_iort_init(void)
{
acpi_status status;
status = acpi_get_table(ACPI_SIG_IORT, 0, &iort_table);
ACPI/IORT: Introduce linker section for IORT entries probing Since commit e647b532275b ("ACPI: Add early device probing infrastructure") the kernel has gained the infrastructure that allows adding linker script section entries to execute ACPI driver callbacks (ie probe routines) for all subsystems that register a table entry in the respective kernel section (eg clocksource, irqchip). Since ARM IOMMU devices data is described through IORT tables when booting with ACPI, the ARM IOMMU drivers must be made able to hook ACPI callback routines that are called to probe IORT entries and initialize the respective IOMMU devices. To avoid adding driver specific hooks into IORT table initialization code (breaking therefore code modularity - ie ACPI IORT code must be made aware of ARM SMMU drivers ACPI init callbacks), this patch adds code that allows ARM SMMU drivers to take advantage of the ACPI early probing infrastructure, so that they can add linker script section entries containing drivers callback to be executed on IORT tables detection. Since IORT nodes are differentiated by a type, the callback routines can easily parse the IORT table entries, check the IORT nodes and carry out some actions whenever the IORT node type associated with the driver specific callback is matched. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Tomasz Nowicki <tn@semihalf.com> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Tomasz Nowicki <tn@semihalf.com> Cc: Tomasz Nowicki <tn@semihalf.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-11-21 17:01:34 +07:00
if (ACPI_FAILURE(status)) {
if (status != AE_NOT_FOUND) {
const char *msg = acpi_format_exception(status);
pr_err("Failed to get table, %s\n", msg);
}
return;
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-13 01:54:20 +07:00
}
ACPI/IORT: Introduce linker section for IORT entries probing Since commit e647b532275b ("ACPI: Add early device probing infrastructure") the kernel has gained the infrastructure that allows adding linker script section entries to execute ACPI driver callbacks (ie probe routines) for all subsystems that register a table entry in the respective kernel section (eg clocksource, irqchip). Since ARM IOMMU devices data is described through IORT tables when booting with ACPI, the ARM IOMMU drivers must be made able to hook ACPI callback routines that are called to probe IORT entries and initialize the respective IOMMU devices. To avoid adding driver specific hooks into IORT table initialization code (breaking therefore code modularity - ie ACPI IORT code must be made aware of ARM SMMU drivers ACPI init callbacks), this patch adds code that allows ARM SMMU drivers to take advantage of the ACPI early probing infrastructure, so that they can add linker script section entries containing drivers callback to be executed on IORT tables detection. Since IORT nodes are differentiated by a type, the callback routines can easily parse the IORT table entries, check the IORT nodes and carry out some actions whenever the IORT node type associated with the driver specific callback is matched. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Tomasz Nowicki <tn@semihalf.com> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Tomasz Nowicki <tn@semihalf.com> Cc: Tomasz Nowicki <tn@semihalf.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-11-21 17:01:34 +07:00
iort_init_platform_devices();
ACPI: I/O Remapping Table (IORT) initial support IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-13 01:54:20 +07:00
}