linux_dsm_epyc7002/arch/arm/mach-gemini/gpio.c

232 lines
5.7 KiB
C
Raw Normal View History

/*
* Gemini gpiochip and interrupt routines
*
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* Based on plat-mxc/gpio.c:
* MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/gpio/driver.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#define GPIO_BASE(x) IO_ADDRESS(GEMINI_GPIO_BASE(x))
#define irq_to_gpio(x) ((x) - GPIO_IRQ_BASE)
/* GPIO registers definition */
#define GPIO_DATA_OUT 0x0
#define GPIO_DATA_IN 0x4
#define GPIO_DIR 0x8
#define GPIO_DATA_SET 0x10
#define GPIO_DATA_CLR 0x14
#define GPIO_PULL_EN 0x18
#define GPIO_PULL_TYPE 0x1C
#define GPIO_INT_EN 0x20
#define GPIO_INT_STAT 0x24
#define GPIO_INT_MASK 0x2C
#define GPIO_INT_CLR 0x30
#define GPIO_INT_TYPE 0x34
#define GPIO_INT_BOTH_EDGE 0x38
#define GPIO_INT_LEVEL 0x3C
#define GPIO_DEBOUNCE_EN 0x40
#define GPIO_DEBOUNCE_PRESCALE 0x44
#define GPIO_PORT_NUM 3
static void _set_gpio_irqenable(void __iomem *base, unsigned int index,
int enable)
{
unsigned int reg;
reg = __raw_readl(base + GPIO_INT_EN);
reg = (reg & (~(1 << index))) | (!!enable << index);
__raw_writel(reg, base + GPIO_INT_EN);
}
static void gpio_ack_irq(struct irq_data *d)
{
unsigned int gpio = irq_to_gpio(d->irq);
void __iomem *base = GPIO_BASE(gpio / 32);
__raw_writel(1 << (gpio % 32), base + GPIO_INT_CLR);
}
static void gpio_mask_irq(struct irq_data *d)
{
unsigned int gpio = irq_to_gpio(d->irq);
void __iomem *base = GPIO_BASE(gpio / 32);
_set_gpio_irqenable(base, gpio % 32, 0);
}
static void gpio_unmask_irq(struct irq_data *d)
{
unsigned int gpio = irq_to_gpio(d->irq);
void __iomem *base = GPIO_BASE(gpio / 32);
_set_gpio_irqenable(base, gpio % 32, 1);
}
static int gpio_set_irq_type(struct irq_data *d, unsigned int type)
{
unsigned int gpio = irq_to_gpio(d->irq);
unsigned int gpio_mask = 1 << (gpio % 32);
void __iomem *base = GPIO_BASE(gpio / 32);
unsigned int reg_both, reg_level, reg_type;
reg_type = __raw_readl(base + GPIO_INT_TYPE);
reg_level = __raw_readl(base + GPIO_INT_LEVEL);
reg_both = __raw_readl(base + GPIO_INT_BOTH_EDGE);
switch (type) {
case IRQ_TYPE_EDGE_BOTH:
reg_type &= ~gpio_mask;
reg_both |= gpio_mask;
break;
case IRQ_TYPE_EDGE_RISING:
reg_type &= ~gpio_mask;
reg_both &= ~gpio_mask;
reg_level &= ~gpio_mask;
break;
case IRQ_TYPE_EDGE_FALLING:
reg_type &= ~gpio_mask;
reg_both &= ~gpio_mask;
reg_level |= gpio_mask;
break;
case IRQ_TYPE_LEVEL_HIGH:
reg_type |= gpio_mask;
reg_level &= ~gpio_mask;
break;
case IRQ_TYPE_LEVEL_LOW:
reg_type |= gpio_mask;
reg_level |= gpio_mask;
break;
default:
return -EINVAL;
}
__raw_writel(reg_type, base + GPIO_INT_TYPE);
__raw_writel(reg_level, base + GPIO_INT_LEVEL);
__raw_writel(reg_both, base + GPIO_INT_BOTH_EDGE);
gpio_ack_irq(d);
return 0;
}
static void gpio_irq_handler(struct irq_desc *desc)
{
unsigned int port = (unsigned int)irq_desc_get_handler_data(desc);
unsigned int gpio_irq_no, irq_stat;
irq_stat = __raw_readl(GPIO_BASE(port) + GPIO_INT_STAT);
gpio_irq_no = GPIO_IRQ_BASE + port * 32;
for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) {
if ((irq_stat & 1) == 0)
continue;
generic_handle_irq(gpio_irq_no);
}
}
static struct irq_chip gpio_irq_chip = {
.name = "GPIO",
.irq_ack = gpio_ack_irq,
.irq_mask = gpio_mask_irq,
.irq_unmask = gpio_unmask_irq,
.irq_set_type = gpio_set_irq_type,
};
static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
int dir)
{
void __iomem *base = GPIO_BASE(offset / 32);
unsigned int reg;
reg = __raw_readl(base + GPIO_DIR);
if (dir)
reg |= 1 << (offset % 32);
else
reg &= ~(1 << (offset % 32));
__raw_writel(reg, base + GPIO_DIR);
}
static void gemini_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
void __iomem *base = GPIO_BASE(offset / 32);
if (value)
__raw_writel(1 << (offset % 32), base + GPIO_DATA_SET);
else
__raw_writel(1 << (offset % 32), base + GPIO_DATA_CLR);
}
static int gemini_gpio_get(struct gpio_chip *chip, unsigned offset)
{
void __iomem *base = GPIO_BASE(offset / 32);
return (__raw_readl(base + GPIO_DATA_IN) >> (offset % 32)) & 1;
}
static int gemini_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
_set_gpio_direction(chip, offset, 0);
return 0;
}
static int gemini_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
int value)
{
_set_gpio_direction(chip, offset, 1);
gemini_gpio_set(chip, offset, value);
return 0;
}
static struct gpio_chip gemini_gpio_chip = {
.label = "Gemini",
.direction_input = gemini_gpio_direction_input,
.get = gemini_gpio_get,
.direction_output = gemini_gpio_direction_output,
.set = gemini_gpio_set,
.base = 0,
.ngpio = GPIO_PORT_NUM * 32,
};
void __init gemini_gpio_init(void)
{
int i, j;
for (i = 0; i < GPIO_PORT_NUM; i++) {
/* disable, unmask and clear all interrupts */
__raw_writel(0x0, GPIO_BASE(i) + GPIO_INT_EN);
__raw_writel(0x0, GPIO_BASE(i) + GPIO_INT_MASK);
__raw_writel(~0x0, GPIO_BASE(i) + GPIO_INT_CLR);
for (j = GPIO_IRQ_BASE + i * 32;
j < GPIO_IRQ_BASE + (i + 1) * 32; j++) {
irq_set_chip_and_handler(j, &gpio_irq_chip,
handle_edge_irq);
ARM: kill off set_irq_flags usage set_irq_flags is ARM specific with custom flags which have genirq equivalents. Convert drivers to use the genirq interfaces directly, so we can kill off set_irq_flags. The translation of flags is as follows: IRQF_VALID -> !IRQ_NOREQUEST IRQF_PROBE -> !IRQ_NOPROBE IRQF_NOAUTOEN -> IRQ_NOAUTOEN For IRQs managed by an irqdomain, the irqdomain core code handles clearing and setting IRQ_NOREQUEST already, so there is no need to do this in .map() functions and we can simply remove the set_irq_flags calls. Some users also modify IRQ_NOPROBE and this has been maintained although it is not clear that is really needed. There appears to be a great deal of blind copy and paste of this code. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Imre Kaloz <kaloz@openwrt.org> Acked-by: Krzysztof Halasa <khalasa@piap.pl> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Roland Stigge <stigge@antcom.de> Cc: Tony Lindgren <tony@atomide.com> Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Simtec Linux Team <linux@simtec.co.uk> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-28 03:55:13 +07:00
irq_clear_status_flags(j, IRQ_NOREQUEST);
}
irq_set_chained_handler_and_data(IRQ_GPIO(i), gpio_irq_handler,
(void *)i);
}
BUG_ON(gpiochip_add_data(&gemini_gpio_chip, NULL));
}