2017-11-03 17:28:30 +07:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
2012-02-29 04:36:35 +07:00
|
|
|
/*
|
|
|
|
* Fintek F81232 USB to serial adaptor driver
|
|
|
|
*
|
|
|
|
* Copyright (C) 2012 Greg Kroah-Hartman (gregkh@linuxfoundation.org)
|
|
|
|
* Copyright (C) 2012 Linux Foundation
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/errno.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/tty.h>
|
|
|
|
#include <linux/tty_driver.h>
|
|
|
|
#include <linux/tty_flip.h>
|
|
|
|
#include <linux/serial.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/moduleparam.h>
|
2015-03-17 16:48:21 +07:00
|
|
|
#include <linux/mutex.h>
|
2012-02-29 04:36:35 +07:00
|
|
|
#include <linux/uaccess.h>
|
|
|
|
#include <linux/usb.h>
|
|
|
|
#include <linux/usb/serial.h>
|
2015-03-17 16:48:20 +07:00
|
|
|
#include <linux/serial_reg.h>
|
2012-02-29 04:36:35 +07:00
|
|
|
|
|
|
|
static const struct usb_device_id id_table[] = {
|
|
|
|
{ USB_DEVICE(0x1934, 0x0706) },
|
|
|
|
{ } /* Terminating entry */
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(usb, id_table);
|
|
|
|
|
2015-03-17 16:48:25 +07:00
|
|
|
/* Maximum baudrate for F81232 */
|
2019-04-30 08:22:31 +07:00
|
|
|
#define F81232_MAX_BAUDRATE 1500000
|
|
|
|
#define F81232_DEF_BAUDRATE 9600
|
2015-03-17 16:48:25 +07:00
|
|
|
|
2015-03-17 16:48:22 +07:00
|
|
|
/* USB Control EP parameter */
|
2015-03-27 23:33:38 +07:00
|
|
|
#define F81232_REGISTER_REQUEST 0xa0
|
2015-03-17 16:48:22 +07:00
|
|
|
#define F81232_GET_REGISTER 0xc0
|
2015-03-17 16:48:23 +07:00
|
|
|
#define F81232_SET_REGISTER 0x40
|
2015-03-17 16:48:22 +07:00
|
|
|
|
2015-03-27 23:33:38 +07:00
|
|
|
#define SERIAL_BASE_ADDRESS 0x0120
|
2015-03-17 16:48:25 +07:00
|
|
|
#define RECEIVE_BUFFER_REGISTER (0x00 + SERIAL_BASE_ADDRESS)
|
2015-03-17 16:48:24 +07:00
|
|
|
#define INTERRUPT_ENABLE_REGISTER (0x01 + SERIAL_BASE_ADDRESS)
|
|
|
|
#define FIFO_CONTROL_REGISTER (0x02 + SERIAL_BASE_ADDRESS)
|
2015-03-17 16:48:25 +07:00
|
|
|
#define LINE_CONTROL_REGISTER (0x03 + SERIAL_BASE_ADDRESS)
|
2015-03-17 16:48:23 +07:00
|
|
|
#define MODEM_CONTROL_REGISTER (0x04 + SERIAL_BASE_ADDRESS)
|
2019-04-30 08:22:30 +07:00
|
|
|
#define LINE_STATUS_REGISTER (0x05 + SERIAL_BASE_ADDRESS)
|
2015-03-17 16:48:22 +07:00
|
|
|
#define MODEM_STATUS_REGISTER (0x06 + SERIAL_BASE_ADDRESS)
|
|
|
|
|
2019-04-30 08:22:31 +07:00
|
|
|
/*
|
|
|
|
* F81232 Clock registers (106h)
|
|
|
|
*
|
|
|
|
* Bit1-0: Clock source selector
|
|
|
|
* 00: 1.846MHz.
|
|
|
|
* 01: 18.46MHz.
|
|
|
|
* 10: 24MHz.
|
|
|
|
* 11: 14.77MHz.
|
|
|
|
*/
|
|
|
|
#define F81232_CLK_REGISTER 0x106
|
|
|
|
#define F81232_CLK_1_846_MHZ 0
|
|
|
|
#define F81232_CLK_18_46_MHZ BIT(0)
|
|
|
|
#define F81232_CLK_24_MHZ BIT(1)
|
|
|
|
#define F81232_CLK_14_77_MHZ (BIT(1) | BIT(0))
|
|
|
|
#define F81232_CLK_MASK GENMASK(1, 0)
|
|
|
|
|
2012-02-29 04:36:35 +07:00
|
|
|
struct f81232_private {
|
2015-03-17 16:48:21 +07:00
|
|
|
struct mutex lock;
|
2015-03-17 16:48:23 +07:00
|
|
|
u8 modem_control;
|
2015-03-17 16:48:19 +07:00
|
|
|
u8 modem_status;
|
2019-04-30 08:22:32 +07:00
|
|
|
u8 shadow_lcr;
|
2019-04-30 08:22:31 +07:00
|
|
|
speed_t baud_base;
|
2019-04-30 08:22:30 +07:00
|
|
|
struct work_struct lsr_work;
|
2015-03-17 16:48:22 +07:00
|
|
|
struct work_struct interrupt_work;
|
|
|
|
struct usb_serial_port *port;
|
2012-02-29 04:36:35 +07:00
|
|
|
};
|
|
|
|
|
2019-04-30 08:22:31 +07:00
|
|
|
static u32 const baudrate_table[] = { 115200, 921600, 1152000, 1500000 };
|
|
|
|
static u8 const clock_table[] = { F81232_CLK_1_846_MHZ, F81232_CLK_14_77_MHZ,
|
|
|
|
F81232_CLK_18_46_MHZ, F81232_CLK_24_MHZ };
|
|
|
|
|
|
|
|
static int calc_baud_divisor(speed_t baudrate, speed_t clockrate)
|
2015-03-17 16:48:25 +07:00
|
|
|
{
|
2019-04-30 08:22:31 +07:00
|
|
|
if (!baudrate)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
return DIV_ROUND_CLOSEST(clockrate, baudrate);
|
2015-03-17 16:48:25 +07:00
|
|
|
}
|
|
|
|
|
2015-03-17 16:48:22 +07:00
|
|
|
static int f81232_get_register(struct usb_serial_port *port, u16 reg, u8 *val)
|
|
|
|
{
|
|
|
|
int status;
|
|
|
|
u8 *tmp;
|
|
|
|
struct usb_device *dev = port->serial->dev;
|
|
|
|
|
|
|
|
tmp = kmalloc(sizeof(*val), GFP_KERNEL);
|
|
|
|
if (!tmp)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
status = usb_control_msg(dev,
|
|
|
|
usb_rcvctrlpipe(dev, 0),
|
|
|
|
F81232_REGISTER_REQUEST,
|
|
|
|
F81232_GET_REGISTER,
|
|
|
|
reg,
|
|
|
|
0,
|
|
|
|
tmp,
|
|
|
|
sizeof(*val),
|
|
|
|
USB_CTRL_GET_TIMEOUT);
|
|
|
|
if (status != sizeof(*val)) {
|
|
|
|
dev_err(&port->dev, "%s failed status: %d\n", __func__, status);
|
|
|
|
|
|
|
|
if (status < 0)
|
|
|
|
status = usb_translate_errors(status);
|
|
|
|
else
|
|
|
|
status = -EIO;
|
|
|
|
} else {
|
|
|
|
status = 0;
|
|
|
|
*val = *tmp;
|
|
|
|
}
|
|
|
|
|
|
|
|
kfree(tmp);
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
|
2015-03-17 16:48:23 +07:00
|
|
|
static int f81232_set_register(struct usb_serial_port *port, u16 reg, u8 val)
|
|
|
|
{
|
|
|
|
int status;
|
|
|
|
u8 *tmp;
|
|
|
|
struct usb_device *dev = port->serial->dev;
|
|
|
|
|
|
|
|
tmp = kmalloc(sizeof(val), GFP_KERNEL);
|
|
|
|
if (!tmp)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
*tmp = val;
|
|
|
|
|
|
|
|
status = usb_control_msg(dev,
|
|
|
|
usb_sndctrlpipe(dev, 0),
|
|
|
|
F81232_REGISTER_REQUEST,
|
|
|
|
F81232_SET_REGISTER,
|
|
|
|
reg,
|
|
|
|
0,
|
|
|
|
tmp,
|
|
|
|
sizeof(val),
|
|
|
|
USB_CTRL_SET_TIMEOUT);
|
|
|
|
if (status != sizeof(val)) {
|
|
|
|
dev_err(&port->dev, "%s failed status: %d\n", __func__, status);
|
|
|
|
|
|
|
|
if (status < 0)
|
|
|
|
status = usb_translate_errors(status);
|
|
|
|
else
|
|
|
|
status = -EIO;
|
|
|
|
} else {
|
|
|
|
status = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
kfree(tmp);
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
|
2019-04-30 08:22:31 +07:00
|
|
|
static int f81232_set_mask_register(struct usb_serial_port *port, u16 reg,
|
|
|
|
u8 mask, u8 val)
|
|
|
|
{
|
|
|
|
int status;
|
|
|
|
u8 tmp;
|
|
|
|
|
|
|
|
status = f81232_get_register(port, reg, &tmp);
|
|
|
|
if (status)
|
|
|
|
return status;
|
|
|
|
|
|
|
|
tmp = (tmp & ~mask) | (val & mask);
|
|
|
|
|
|
|
|
return f81232_set_register(port, reg, tmp);
|
|
|
|
}
|
|
|
|
|
2015-03-17 16:48:22 +07:00
|
|
|
static void f81232_read_msr(struct usb_serial_port *port)
|
|
|
|
{
|
|
|
|
int status;
|
|
|
|
u8 current_msr;
|
|
|
|
struct tty_struct *tty;
|
|
|
|
struct f81232_private *priv = usb_get_serial_port_data(port);
|
|
|
|
|
|
|
|
mutex_lock(&priv->lock);
|
|
|
|
status = f81232_get_register(port, MODEM_STATUS_REGISTER,
|
|
|
|
¤t_msr);
|
|
|
|
if (status) {
|
|
|
|
dev_err(&port->dev, "%s fail, status: %d\n", __func__, status);
|
|
|
|
mutex_unlock(&priv->lock);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!(current_msr & UART_MSR_ANY_DELTA)) {
|
|
|
|
mutex_unlock(&priv->lock);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
priv->modem_status = current_msr;
|
|
|
|
|
|
|
|
if (current_msr & UART_MSR_DCTS)
|
|
|
|
port->icount.cts++;
|
|
|
|
if (current_msr & UART_MSR_DDSR)
|
|
|
|
port->icount.dsr++;
|
|
|
|
if (current_msr & UART_MSR_TERI)
|
|
|
|
port->icount.rng++;
|
|
|
|
if (current_msr & UART_MSR_DDCD) {
|
|
|
|
port->icount.dcd++;
|
|
|
|
tty = tty_port_tty_get(&port->port);
|
|
|
|
if (tty) {
|
|
|
|
usb_serial_handle_dcd_change(port, tty,
|
|
|
|
current_msr & UART_MSR_DCD);
|
|
|
|
|
|
|
|
tty_kref_put(tty);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
wake_up_interruptible(&port->port.delta_msr_wait);
|
|
|
|
mutex_unlock(&priv->lock);
|
|
|
|
}
|
|
|
|
|
2015-03-17 16:48:23 +07:00
|
|
|
static int f81232_set_mctrl(struct usb_serial_port *port,
|
|
|
|
unsigned int set, unsigned int clear)
|
|
|
|
{
|
|
|
|
u8 val;
|
|
|
|
int status;
|
|
|
|
struct f81232_private *priv = usb_get_serial_port_data(port);
|
|
|
|
|
|
|
|
if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0)
|
|
|
|
return 0; /* no change */
|
|
|
|
|
|
|
|
/* 'set' takes precedence over 'clear' */
|
|
|
|
clear &= ~set;
|
|
|
|
|
|
|
|
/* force enable interrupt with OUT2 */
|
|
|
|
mutex_lock(&priv->lock);
|
|
|
|
val = UART_MCR_OUT2 | priv->modem_control;
|
|
|
|
|
|
|
|
if (clear & TIOCM_DTR)
|
|
|
|
val &= ~UART_MCR_DTR;
|
|
|
|
|
|
|
|
if (clear & TIOCM_RTS)
|
|
|
|
val &= ~UART_MCR_RTS;
|
|
|
|
|
|
|
|
if (set & TIOCM_DTR)
|
|
|
|
val |= UART_MCR_DTR;
|
|
|
|
|
|
|
|
if (set & TIOCM_RTS)
|
|
|
|
val |= UART_MCR_RTS;
|
|
|
|
|
|
|
|
dev_dbg(&port->dev, "%s new:%02x old:%02x\n", __func__,
|
|
|
|
val, priv->modem_control);
|
|
|
|
|
|
|
|
status = f81232_set_register(port, MODEM_CONTROL_REGISTER, val);
|
|
|
|
if (status) {
|
|
|
|
dev_err(&port->dev, "%s set MCR status < 0\n", __func__);
|
|
|
|
mutex_unlock(&priv->lock);
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
|
|
|
|
priv->modem_control = val;
|
|
|
|
mutex_unlock(&priv->lock);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-02-29 04:36:35 +07:00
|
|
|
static void f81232_update_line_status(struct usb_serial_port *port,
|
|
|
|
unsigned char *data,
|
2015-03-17 16:48:22 +07:00
|
|
|
size_t actual_length)
|
2012-02-29 04:36:35 +07:00
|
|
|
{
|
2015-03-17 16:48:22 +07:00
|
|
|
struct f81232_private *priv = usb_get_serial_port_data(port);
|
|
|
|
|
|
|
|
if (!actual_length)
|
|
|
|
return;
|
|
|
|
|
|
|
|
switch (data[0] & 0x07) {
|
|
|
|
case 0x00: /* msr change */
|
|
|
|
dev_dbg(&port->dev, "IIR: MSR Change: %02x\n", data[0]);
|
|
|
|
schedule_work(&priv->interrupt_work);
|
|
|
|
break;
|
|
|
|
case 0x02: /* tx-empty */
|
|
|
|
break;
|
|
|
|
case 0x04: /* rx data available */
|
|
|
|
break;
|
|
|
|
case 0x06: /* lsr change */
|
|
|
|
/* we can forget it. the LSR will read from bulk-in */
|
|
|
|
dev_dbg(&port->dev, "IIR: LSR Change: %02x\n", data[0]);
|
|
|
|
break;
|
|
|
|
}
|
2012-02-29 04:36:35 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static void f81232_read_int_callback(struct urb *urb)
|
|
|
|
{
|
|
|
|
struct usb_serial_port *port = urb->context;
|
|
|
|
unsigned char *data = urb->transfer_buffer;
|
|
|
|
unsigned int actual_length = urb->actual_length;
|
|
|
|
int status = urb->status;
|
|
|
|
int retval;
|
|
|
|
|
|
|
|
switch (status) {
|
|
|
|
case 0:
|
|
|
|
/* success */
|
|
|
|
break;
|
|
|
|
case -ECONNRESET:
|
|
|
|
case -ENOENT:
|
|
|
|
case -ESHUTDOWN:
|
|
|
|
/* this urb is terminated, clean up */
|
2012-05-16 06:27:17 +07:00
|
|
|
dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
|
|
|
|
__func__, status);
|
2012-02-29 04:36:35 +07:00
|
|
|
return;
|
|
|
|
default:
|
2012-05-16 06:27:17 +07:00
|
|
|
dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
|
|
|
|
__func__, status);
|
2012-02-29 04:36:35 +07:00
|
|
|
goto exit;
|
|
|
|
}
|
|
|
|
|
2012-09-18 15:58:57 +07:00
|
|
|
usb_serial_debug_data(&port->dev, __func__,
|
2012-02-29 04:36:35 +07:00
|
|
|
urb->actual_length, urb->transfer_buffer);
|
|
|
|
|
|
|
|
f81232_update_line_status(port, data, actual_length);
|
|
|
|
|
|
|
|
exit:
|
|
|
|
retval = usb_submit_urb(urb, GFP_ATOMIC);
|
|
|
|
if (retval)
|
|
|
|
dev_err(&urb->dev->dev,
|
|
|
|
"%s - usb_submit_urb failed with result %d\n",
|
|
|
|
__func__, retval);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void f81232_process_read_urb(struct urb *urb)
|
|
|
|
{
|
|
|
|
struct usb_serial_port *port = urb->context;
|
2019-04-30 08:22:30 +07:00
|
|
|
struct f81232_private *priv = usb_get_serial_port_data(port);
|
2012-02-29 04:36:35 +07:00
|
|
|
unsigned char *data = urb->transfer_buffer;
|
2015-03-17 16:48:20 +07:00
|
|
|
char tty_flag;
|
|
|
|
unsigned int i;
|
|
|
|
u8 lsr;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* When opening the port we get a 1-byte packet with the current LSR,
|
|
|
|
* which we discard.
|
|
|
|
*/
|
|
|
|
if ((urb->actual_length < 2) || (urb->actual_length % 2))
|
2012-02-29 04:36:35 +07:00
|
|
|
return;
|
|
|
|
|
2015-03-17 16:48:20 +07:00
|
|
|
/* bulk-in data: [LSR(1Byte)+DATA(1Byte)][LSR(1Byte)+DATA(1Byte)]... */
|
|
|
|
|
|
|
|
for (i = 0; i < urb->actual_length; i += 2) {
|
|
|
|
tty_flag = TTY_NORMAL;
|
|
|
|
lsr = data[i];
|
|
|
|
|
|
|
|
if (lsr & UART_LSR_BRK_ERROR_BITS) {
|
|
|
|
if (lsr & UART_LSR_BI) {
|
|
|
|
tty_flag = TTY_BREAK;
|
|
|
|
port->icount.brk++;
|
|
|
|
usb_serial_handle_break(port);
|
|
|
|
} else if (lsr & UART_LSR_PE) {
|
|
|
|
tty_flag = TTY_PARITY;
|
|
|
|
port->icount.parity++;
|
|
|
|
} else if (lsr & UART_LSR_FE) {
|
|
|
|
tty_flag = TTY_FRAME;
|
|
|
|
port->icount.frame++;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (lsr & UART_LSR_OE) {
|
|
|
|
port->icount.overrun++;
|
2019-04-30 08:22:30 +07:00
|
|
|
schedule_work(&priv->lsr_work);
|
2015-03-17 16:48:20 +07:00
|
|
|
tty_insert_flip_char(&port->port, 0,
|
|
|
|
TTY_OVERRUN);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (port->port.console && port->sysrq) {
|
|
|
|
if (usb_serial_handle_sysrq_char(port, data[i + 1]))
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
tty_insert_flip_char(&port->port, data[i + 1], tty_flag);
|
2012-02-29 04:36:35 +07:00
|
|
|
}
|
|
|
|
|
2013-01-03 21:53:06 +07:00
|
|
|
tty_flip_buffer_push(&port->port);
|
2012-02-29 04:36:35 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static void f81232_break_ctl(struct tty_struct *tty, int break_state)
|
|
|
|
{
|
2019-04-30 08:22:32 +07:00
|
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
|
|
struct f81232_private *priv = usb_get_serial_port_data(port);
|
|
|
|
int status;
|
2012-02-29 04:36:35 +07:00
|
|
|
|
2019-04-30 08:22:32 +07:00
|
|
|
mutex_lock(&priv->lock);
|
|
|
|
|
|
|
|
if (break_state)
|
|
|
|
priv->shadow_lcr |= UART_LCR_SBC;
|
|
|
|
else
|
|
|
|
priv->shadow_lcr &= ~UART_LCR_SBC;
|
|
|
|
|
|
|
|
status = f81232_set_register(port, LINE_CONTROL_REGISTER,
|
|
|
|
priv->shadow_lcr);
|
|
|
|
if (status)
|
|
|
|
dev_err(&port->dev, "set break failed: %d\n", status);
|
|
|
|
|
|
|
|
mutex_unlock(&priv->lock);
|
2012-02-29 04:36:35 +07:00
|
|
|
}
|
|
|
|
|
2019-04-30 08:22:31 +07:00
|
|
|
static int f81232_find_clk(speed_t baudrate)
|
|
|
|
{
|
|
|
|
int idx;
|
|
|
|
|
|
|
|
for (idx = 0; idx < ARRAY_SIZE(baudrate_table); ++idx) {
|
|
|
|
if (baudrate <= baudrate_table[idx] &&
|
|
|
|
baudrate_table[idx] % baudrate == 0)
|
|
|
|
return idx;
|
|
|
|
}
|
|
|
|
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void f81232_set_baudrate(struct tty_struct *tty,
|
|
|
|
struct usb_serial_port *port, speed_t baudrate,
|
|
|
|
speed_t old_baudrate)
|
2015-03-17 16:48:25 +07:00
|
|
|
{
|
2019-04-30 08:22:31 +07:00
|
|
|
struct f81232_private *priv = usb_get_serial_port_data(port);
|
2015-03-17 16:48:25 +07:00
|
|
|
u8 lcr;
|
2015-03-27 23:33:38 +07:00
|
|
|
int divisor;
|
|
|
|
int status = 0;
|
2019-04-30 08:22:31 +07:00
|
|
|
int i;
|
|
|
|
int idx;
|
|
|
|
speed_t baud_list[] = { baudrate, old_baudrate, F81232_DEF_BAUDRATE };
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(baud_list); ++i) {
|
|
|
|
idx = f81232_find_clk(baud_list[i]);
|
|
|
|
if (idx >= 0) {
|
|
|
|
baudrate = baud_list[i];
|
|
|
|
tty_encode_baud_rate(tty, baudrate, baudrate);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (idx < 0)
|
|
|
|
return;
|
|
|
|
|
|
|
|
priv->baud_base = baudrate_table[idx];
|
|
|
|
divisor = calc_baud_divisor(baudrate, priv->baud_base);
|
2015-03-17 16:48:25 +07:00
|
|
|
|
2019-04-30 08:22:31 +07:00
|
|
|
status = f81232_set_mask_register(port, F81232_CLK_REGISTER,
|
|
|
|
F81232_CLK_MASK, clock_table[idx]);
|
|
|
|
if (status) {
|
|
|
|
dev_err(&port->dev, "%s failed to set CLK_REG: %d\n",
|
|
|
|
__func__, status);
|
|
|
|
return;
|
|
|
|
}
|
2015-03-17 16:48:25 +07:00
|
|
|
|
|
|
|
status = f81232_get_register(port, LINE_CONTROL_REGISTER,
|
|
|
|
&lcr); /* get LCR */
|
|
|
|
if (status) {
|
|
|
|
dev_err(&port->dev, "%s failed to get LCR: %d\n",
|
|
|
|
__func__, status);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
status = f81232_set_register(port, LINE_CONTROL_REGISTER,
|
|
|
|
lcr | UART_LCR_DLAB); /* Enable DLAB */
|
|
|
|
if (status) {
|
|
|
|
dev_err(&port->dev, "%s failed to set DLAB: %d\n",
|
|
|
|
__func__, status);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
status = f81232_set_register(port, RECEIVE_BUFFER_REGISTER,
|
|
|
|
divisor & 0x00ff); /* low */
|
|
|
|
if (status) {
|
|
|
|
dev_err(&port->dev, "%s failed to set baudrate MSB: %d\n",
|
|
|
|
__func__, status);
|
|
|
|
goto reapply_lcr;
|
|
|
|
}
|
|
|
|
|
|
|
|
status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER,
|
|
|
|
(divisor & 0xff00) >> 8); /* high */
|
|
|
|
if (status) {
|
|
|
|
dev_err(&port->dev, "%s failed to set baudrate LSB: %d\n",
|
|
|
|
__func__, status);
|
|
|
|
}
|
|
|
|
|
|
|
|
reapply_lcr:
|
|
|
|
status = f81232_set_register(port, LINE_CONTROL_REGISTER,
|
|
|
|
lcr & ~UART_LCR_DLAB);
|
|
|
|
if (status) {
|
|
|
|
dev_err(&port->dev, "%s failed to set DLAB: %d\n",
|
|
|
|
__func__, status);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2015-03-17 16:48:24 +07:00
|
|
|
static int f81232_port_enable(struct usb_serial_port *port)
|
|
|
|
{
|
|
|
|
u8 val;
|
|
|
|
int status;
|
|
|
|
|
|
|
|
/* fifo on, trigger8, clear TX/RX*/
|
|
|
|
val = UART_FCR_TRIGGER_8 | UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
|
|
|
|
UART_FCR_CLEAR_XMIT;
|
|
|
|
|
|
|
|
status = f81232_set_register(port, FIFO_CONTROL_REGISTER, val);
|
|
|
|
if (status) {
|
|
|
|
dev_err(&port->dev, "%s failed to set FCR: %d\n",
|
|
|
|
__func__, status);
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* MSR Interrupt only, LSR will read from Bulk-in odd byte */
|
|
|
|
status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER,
|
|
|
|
UART_IER_MSI);
|
|
|
|
if (status) {
|
|
|
|
dev_err(&port->dev, "%s failed to set IER: %d\n",
|
|
|
|
__func__, status);
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int f81232_port_disable(struct usb_serial_port *port)
|
|
|
|
{
|
|
|
|
int status;
|
|
|
|
|
|
|
|
status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, 0);
|
|
|
|
if (status) {
|
|
|
|
dev_err(&port->dev, "%s failed to set IER: %d\n",
|
|
|
|
__func__, status);
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-02-29 04:36:35 +07:00
|
|
|
static void f81232_set_termios(struct tty_struct *tty,
|
|
|
|
struct usb_serial_port *port, struct ktermios *old_termios)
|
|
|
|
{
|
2019-04-30 08:22:32 +07:00
|
|
|
struct f81232_private *priv = usb_get_serial_port_data(port);
|
2015-03-17 16:48:25 +07:00
|
|
|
u8 new_lcr = 0;
|
|
|
|
int status = 0;
|
|
|
|
speed_t baudrate;
|
2019-04-30 08:22:31 +07:00
|
|
|
speed_t old_baud;
|
2012-02-29 04:36:35 +07:00
|
|
|
|
|
|
|
/* Don't change anything if nothing has changed */
|
2013-06-10 23:29:37 +07:00
|
|
|
if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
|
2012-02-29 04:36:35 +07:00
|
|
|
return;
|
|
|
|
|
2015-03-17 16:48:25 +07:00
|
|
|
if (C_BAUD(tty) == B0)
|
|
|
|
f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS);
|
|
|
|
else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
|
|
|
|
f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0);
|
|
|
|
|
|
|
|
baudrate = tty_get_baud_rate(tty);
|
|
|
|
if (baudrate > 0) {
|
2019-04-30 08:22:31 +07:00
|
|
|
if (old_termios)
|
|
|
|
old_baud = tty_termios_baud_rate(old_termios);
|
|
|
|
else
|
|
|
|
old_baud = F81232_DEF_BAUDRATE;
|
|
|
|
|
|
|
|
f81232_set_baudrate(tty, port, baudrate, old_baud);
|
2015-03-17 16:48:25 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
if (C_PARENB(tty)) {
|
|
|
|
new_lcr |= UART_LCR_PARITY;
|
|
|
|
|
|
|
|
if (!C_PARODD(tty))
|
|
|
|
new_lcr |= UART_LCR_EPAR;
|
|
|
|
|
|
|
|
if (C_CMSPAR(tty))
|
|
|
|
new_lcr |= UART_LCR_SPAR;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (C_CSTOPB(tty))
|
|
|
|
new_lcr |= UART_LCR_STOP;
|
|
|
|
|
|
|
|
switch (C_CSIZE(tty)) {
|
|
|
|
case CS5:
|
|
|
|
new_lcr |= UART_LCR_WLEN5;
|
|
|
|
break;
|
|
|
|
case CS6:
|
|
|
|
new_lcr |= UART_LCR_WLEN6;
|
|
|
|
break;
|
|
|
|
case CS7:
|
|
|
|
new_lcr |= UART_LCR_WLEN7;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
case CS8:
|
|
|
|
new_lcr |= UART_LCR_WLEN8;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2019-04-30 08:22:32 +07:00
|
|
|
mutex_lock(&priv->lock);
|
|
|
|
|
|
|
|
new_lcr |= (priv->shadow_lcr & UART_LCR_SBC);
|
2015-03-17 16:48:25 +07:00
|
|
|
status = f81232_set_register(port, LINE_CONTROL_REGISTER, new_lcr);
|
|
|
|
if (status) {
|
|
|
|
dev_err(&port->dev, "%s failed to set LCR: %d\n",
|
|
|
|
__func__, status);
|
|
|
|
}
|
2019-04-30 08:22:32 +07:00
|
|
|
|
|
|
|
priv->shadow_lcr = new_lcr;
|
|
|
|
|
|
|
|
mutex_unlock(&priv->lock);
|
2012-02-29 04:36:35 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static int f81232_tiocmget(struct tty_struct *tty)
|
|
|
|
{
|
2015-03-17 16:48:23 +07:00
|
|
|
int r;
|
|
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
|
|
struct f81232_private *port_priv = usb_get_serial_port_data(port);
|
|
|
|
u8 mcr, msr;
|
|
|
|
|
|
|
|
/* force get current MSR changed state */
|
|
|
|
f81232_read_msr(port);
|
|
|
|
|
|
|
|
mutex_lock(&port_priv->lock);
|
|
|
|
mcr = port_priv->modem_control;
|
|
|
|
msr = port_priv->modem_status;
|
|
|
|
mutex_unlock(&port_priv->lock);
|
|
|
|
|
|
|
|
r = (mcr & UART_MCR_DTR ? TIOCM_DTR : 0) |
|
|
|
|
(mcr & UART_MCR_RTS ? TIOCM_RTS : 0) |
|
|
|
|
(msr & UART_MSR_CTS ? TIOCM_CTS : 0) |
|
|
|
|
(msr & UART_MSR_DCD ? TIOCM_CAR : 0) |
|
|
|
|
(msr & UART_MSR_RI ? TIOCM_RI : 0) |
|
|
|
|
(msr & UART_MSR_DSR ? TIOCM_DSR : 0);
|
|
|
|
|
|
|
|
return r;
|
2012-02-29 04:36:35 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static int f81232_tiocmset(struct tty_struct *tty,
|
|
|
|
unsigned int set, unsigned int clear)
|
|
|
|
{
|
2015-03-17 16:48:23 +07:00
|
|
|
struct usb_serial_port *port = tty->driver_data;
|
|
|
|
|
|
|
|
return f81232_set_mctrl(port, set, clear);
|
2012-02-29 04:36:35 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
|
|
|
|
{
|
|
|
|
int result;
|
|
|
|
|
2015-03-17 16:48:24 +07:00
|
|
|
result = f81232_port_enable(port);
|
|
|
|
if (result)
|
|
|
|
return result;
|
|
|
|
|
2012-02-29 04:36:35 +07:00
|
|
|
/* Setup termios */
|
|
|
|
if (tty)
|
2013-06-10 23:29:37 +07:00
|
|
|
f81232_set_termios(tty, port, NULL);
|
2012-02-29 04:36:35 +07:00
|
|
|
|
|
|
|
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
|
|
|
|
if (result) {
|
|
|
|
dev_err(&port->dev, "%s - failed submitting interrupt urb,"
|
|
|
|
" error %d\n", __func__, result);
|
|
|
|
return result;
|
|
|
|
}
|
|
|
|
|
|
|
|
result = usb_serial_generic_open(tty, port);
|
|
|
|
if (result) {
|
|
|
|
usb_kill_urb(port->interrupt_in_urb);
|
|
|
|
return result;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void f81232_close(struct usb_serial_port *port)
|
|
|
|
{
|
2019-04-30 08:22:29 +07:00
|
|
|
struct f81232_private *port_priv = usb_get_serial_port_data(port);
|
|
|
|
|
2015-03-17 16:48:24 +07:00
|
|
|
f81232_port_disable(port);
|
2012-02-29 04:36:35 +07:00
|
|
|
usb_serial_generic_close(port);
|
|
|
|
usb_kill_urb(port->interrupt_in_urb);
|
2019-04-30 08:22:29 +07:00
|
|
|
flush_work(&port_priv->interrupt_work);
|
2019-04-30 08:22:30 +07:00
|
|
|
flush_work(&port_priv->lsr_work);
|
2012-02-29 04:36:35 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static void f81232_dtr_rts(struct usb_serial_port *port, int on)
|
|
|
|
{
|
|
|
|
if (on)
|
2015-03-17 16:48:23 +07:00
|
|
|
f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0);
|
2012-02-29 04:36:35 +07:00
|
|
|
else
|
2015-03-17 16:48:23 +07:00
|
|
|
f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS);
|
2012-02-29 04:36:35 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static int f81232_carrier_raised(struct usb_serial_port *port)
|
|
|
|
{
|
2015-03-17 16:48:23 +07:00
|
|
|
u8 msr;
|
2012-02-29 04:36:35 +07:00
|
|
|
struct f81232_private *priv = usb_get_serial_port_data(port);
|
2015-03-17 16:48:23 +07:00
|
|
|
|
|
|
|
mutex_lock(&priv->lock);
|
|
|
|
msr = priv->modem_status;
|
|
|
|
mutex_unlock(&priv->lock);
|
|
|
|
|
|
|
|
if (msr & UART_MSR_DCD)
|
2012-02-29 04:36:35 +07:00
|
|
|
return 1;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-09-12 10:37:01 +07:00
|
|
|
static int f81232_get_serial_info(struct tty_struct *tty,
|
|
|
|
struct serial_struct *ss)
|
2012-02-29 04:36:35 +07:00
|
|
|
{
|
|
|
|
struct usb_serial_port *port = tty->driver_data;
|
2019-04-30 08:22:31 +07:00
|
|
|
struct f81232_private *priv = usb_get_serial_port_data(port);
|
2012-05-16 06:27:17 +07:00
|
|
|
|
2018-09-12 10:37:01 +07:00
|
|
|
ss->type = PORT_16550A;
|
|
|
|
ss->line = port->minor;
|
|
|
|
ss->port = port->port_number;
|
2019-04-30 08:22:31 +07:00
|
|
|
ss->baud_base = priv->baud_base;
|
2018-09-12 10:37:01 +07:00
|
|
|
return 0;
|
2012-02-29 04:36:35 +07:00
|
|
|
}
|
|
|
|
|
2015-03-17 16:48:22 +07:00
|
|
|
static void f81232_interrupt_work(struct work_struct *work)
|
|
|
|
{
|
|
|
|
struct f81232_private *priv =
|
|
|
|
container_of(work, struct f81232_private, interrupt_work);
|
|
|
|
|
|
|
|
f81232_read_msr(priv->port);
|
|
|
|
}
|
|
|
|
|
2019-04-30 08:22:30 +07:00
|
|
|
static void f81232_lsr_worker(struct work_struct *work)
|
|
|
|
{
|
|
|
|
struct f81232_private *priv;
|
|
|
|
struct usb_serial_port *port;
|
|
|
|
int status;
|
|
|
|
u8 tmp;
|
|
|
|
|
|
|
|
priv = container_of(work, struct f81232_private, lsr_work);
|
|
|
|
port = priv->port;
|
|
|
|
|
|
|
|
status = f81232_get_register(port, LINE_STATUS_REGISTER, &tmp);
|
|
|
|
if (status)
|
|
|
|
dev_warn(&port->dev, "read LSR failed: %d\n", status);
|
|
|
|
}
|
|
|
|
|
2012-10-17 18:34:56 +07:00
|
|
|
static int f81232_port_probe(struct usb_serial_port *port)
|
2012-02-29 04:36:35 +07:00
|
|
|
{
|
|
|
|
struct f81232_private *priv;
|
|
|
|
|
2012-10-17 18:34:56 +07:00
|
|
|
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
|
|
|
|
if (!priv)
|
|
|
|
return -ENOMEM;
|
2012-02-29 04:36:35 +07:00
|
|
|
|
2015-03-17 16:48:21 +07:00
|
|
|
mutex_init(&priv->lock);
|
2015-03-17 16:48:22 +07:00
|
|
|
INIT_WORK(&priv->interrupt_work, f81232_interrupt_work);
|
2019-04-30 08:22:30 +07:00
|
|
|
INIT_WORK(&priv->lsr_work, f81232_lsr_worker);
|
2012-10-17 18:34:56 +07:00
|
|
|
|
|
|
|
usb_set_serial_port_data(port, priv);
|
|
|
|
|
2013-06-26 21:47:23 +07:00
|
|
|
port->port.drain_delay = 256;
|
2015-03-17 16:48:22 +07:00
|
|
|
priv->port = port;
|
2013-06-26 21:47:23 +07:00
|
|
|
|
2012-10-17 18:34:56 +07:00
|
|
|
return 0;
|
2012-02-29 04:36:35 +07:00
|
|
|
}
|
|
|
|
|
2012-10-17 18:34:56 +07:00
|
|
|
static int f81232_port_remove(struct usb_serial_port *port)
|
2012-02-29 04:36:35 +07:00
|
|
|
{
|
|
|
|
struct f81232_private *priv;
|
|
|
|
|
2012-10-17 18:34:56 +07:00
|
|
|
priv = usb_get_serial_port_data(port);
|
|
|
|
kfree(priv);
|
|
|
|
|
|
|
|
return 0;
|
2012-02-29 04:36:35 +07:00
|
|
|
}
|
|
|
|
|
2019-04-30 08:22:29 +07:00
|
|
|
static int f81232_suspend(struct usb_serial *serial, pm_message_t message)
|
|
|
|
{
|
|
|
|
struct usb_serial_port *port = serial->port[0];
|
|
|
|
struct f81232_private *port_priv = usb_get_serial_port_data(port);
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i)
|
|
|
|
usb_kill_urb(port->read_urbs[i]);
|
|
|
|
|
|
|
|
usb_kill_urb(port->interrupt_in_urb);
|
|
|
|
|
2019-04-30 08:22:30 +07:00
|
|
|
if (port_priv) {
|
2019-04-30 08:22:29 +07:00
|
|
|
flush_work(&port_priv->interrupt_work);
|
2019-04-30 08:22:30 +07:00
|
|
|
flush_work(&port_priv->lsr_work);
|
|
|
|
}
|
2019-04-30 08:22:29 +07:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int f81232_resume(struct usb_serial *serial)
|
|
|
|
{
|
|
|
|
struct usb_serial_port *port = serial->port[0];
|
|
|
|
int result;
|
|
|
|
|
|
|
|
if (tty_port_initialized(&port->port)) {
|
|
|
|
result = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
|
|
|
|
if (result) {
|
|
|
|
dev_err(&port->dev, "submit interrupt urb failed: %d\n",
|
|
|
|
result);
|
|
|
|
return result;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return usb_serial_generic_resume(serial);
|
|
|
|
}
|
|
|
|
|
2012-02-29 04:36:35 +07:00
|
|
|
static struct usb_serial_driver f81232_device = {
|
|
|
|
.driver = {
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
.name = "f81232",
|
|
|
|
},
|
|
|
|
.id_table = id_table,
|
|
|
|
.num_ports = 1,
|
|
|
|
.bulk_in_size = 256,
|
|
|
|
.bulk_out_size = 256,
|
|
|
|
.open = f81232_open,
|
|
|
|
.close = f81232_close,
|
2015-03-27 23:33:38 +07:00
|
|
|
.dtr_rts = f81232_dtr_rts,
|
2012-02-29 04:36:35 +07:00
|
|
|
.carrier_raised = f81232_carrier_raised,
|
2018-09-12 10:37:01 +07:00
|
|
|
.get_serial = f81232_get_serial_info,
|
2012-02-29 04:36:35 +07:00
|
|
|
.break_ctl = f81232_break_ctl,
|
|
|
|
.set_termios = f81232_set_termios,
|
|
|
|
.tiocmget = f81232_tiocmget,
|
|
|
|
.tiocmset = f81232_tiocmset,
|
2013-12-30 01:22:58 +07:00
|
|
|
.tiocmiwait = usb_serial_generic_tiocmiwait,
|
2012-02-29 04:36:35 +07:00
|
|
|
.process_read_urb = f81232_process_read_urb,
|
|
|
|
.read_int_callback = f81232_read_int_callback,
|
2012-10-17 18:34:56 +07:00
|
|
|
.port_probe = f81232_port_probe,
|
|
|
|
.port_remove = f81232_port_remove,
|
2019-04-30 08:22:29 +07:00
|
|
|
.suspend = f81232_suspend,
|
|
|
|
.resume = f81232_resume,
|
2012-02-29 04:36:35 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
static struct usb_serial_driver * const serial_drivers[] = {
|
|
|
|
&f81232_device,
|
|
|
|
NULL,
|
|
|
|
};
|
|
|
|
|
2012-05-09 05:46:14 +07:00
|
|
|
module_usb_serial_driver(serial_drivers, id_table);
|
2012-02-29 04:36:35 +07:00
|
|
|
|
|
|
|
MODULE_DESCRIPTION("Fintek F81232 USB to serial adaptor driver");
|
2015-03-17 16:48:28 +07:00
|
|
|
MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org>");
|
|
|
|
MODULE_AUTHOR("Peter Hong <peter_hong@fintek.com.tw>");
|
2012-02-29 04:36:35 +07:00
|
|
|
MODULE_LICENSE("GPL v2");
|