linux_dsm_epyc7002/drivers/net/usb/cdc_mbim.c

682 lines
19 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2012 Smith Micro Software, Inc.
* Copyright (c) 2012 Bjørn Mork <bjorn@mork.no>
*
* This driver is based on and reuse most of cdc_ncm, which is
* Copyright (C) ST-Ericsson 2010-2012
*/
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/ethtool.h>
#include <linux/if_vlan.h>
#include <linux/ip.h>
#include <linux/mii.h>
#include <linux/usb.h>
#include <linux/usb/cdc.h>
#include <linux/usb/usbnet.h>
#include <linux/usb/cdc-wdm.h>
#include <linux/usb/cdc_ncm.h>
#include <net/ipv6.h>
#include <net/addrconf.h>
#include <net/ipv6_stubs.h>
net: cdc_mbim: optionally use VLAN ID 4094 for IP session 0 The cdc_mbim driver maps 802.1q VLANs to MBIM IP and DSS sessions. MBIM IP session 0 is handled as an exception and is mapped to untagged frames. This patch adds optional support for remapping MBIM IP session 0 to 802.1q VLAN ID 4094 instead. The default behaviour is not changed. The new behaviour is triggered by adding a link for this previously unsupported VLAN. The untagged mapping was chosen initially to support the assumed most common use case: Most current MBIM devices only support a single IP session (i.e. session 0 only), and using untagged frames lets the users completely ignore the additonal complexity of the multiplexing layer. But when the multiplexing features of MBIM are used, then this netdev gets a double meaning: It becomes the master interface for all the VLAN subdevs the additional sessions are mapped to, while still serving as the untagged IP interface for session 0. This can be problematic, especially when using Device Service Streams (DSS), as have become apparent recently with the availability of devices with real DSS support. Some use cases need to e.g set a MTU which is higher than allowed for IP Session 0. The dual role also leads to the situation where the IP Session 0 interface cannot be taken down without breaking unrelated IP or DSS sessions - a devastating side effect which applications managing a simple IP session cannot be expected to be aware of. A typical DHCP client will assume that it should bring the interface down after releasing the IP lease. These problems can be avoided by tagging IP session 0 packets too, making this session similar to all other multiplexed sessions. This redefines the main netdev as an upper master interface only. Cc: Greg Suarez <gsuarez@smithmicro.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-11 15:47:12 +07:00
/* alternative VLAN for IP session 0 if not untagged */
#define MBIM_IPS0_VID 4094
/* driver specific data - must match cdc_ncm usage */
struct cdc_mbim_state {
struct cdc_ncm_ctx *ctx;
atomic_t pmcount;
struct usb_driver *subdriver;
net: cdc_mbim: optionally use VLAN ID 4094 for IP session 0 The cdc_mbim driver maps 802.1q VLANs to MBIM IP and DSS sessions. MBIM IP session 0 is handled as an exception and is mapped to untagged frames. This patch adds optional support for remapping MBIM IP session 0 to 802.1q VLAN ID 4094 instead. The default behaviour is not changed. The new behaviour is triggered by adding a link for this previously unsupported VLAN. The untagged mapping was chosen initially to support the assumed most common use case: Most current MBIM devices only support a single IP session (i.e. session 0 only), and using untagged frames lets the users completely ignore the additonal complexity of the multiplexing layer. But when the multiplexing features of MBIM are used, then this netdev gets a double meaning: It becomes the master interface for all the VLAN subdevs the additional sessions are mapped to, while still serving as the untagged IP interface for session 0. This can be problematic, especially when using Device Service Streams (DSS), as have become apparent recently with the availability of devices with real DSS support. Some use cases need to e.g set a MTU which is higher than allowed for IP Session 0. The dual role also leads to the situation where the IP Session 0 interface cannot be taken down without breaking unrelated IP or DSS sessions - a devastating side effect which applications managing a simple IP session cannot be expected to be aware of. A typical DHCP client will assume that it should bring the interface down after releasing the IP lease. These problems can be avoided by tagging IP session 0 packets too, making this session similar to all other multiplexed sessions. This redefines the main netdev as an upper master interface only. Cc: Greg Suarez <gsuarez@smithmicro.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-11 15:47:12 +07:00
unsigned long _unused;
unsigned long flags;
};
/* flags for the cdc_mbim_state.flags field */
enum cdc_mbim_flags {
FLAG_IPS0_VLAN = 1 << 0, /* IP session 0 is tagged */
};
/* using a counter to merge subdriver requests with our own into a combined state */
static int cdc_mbim_manage_power(struct usbnet *dev, int on)
{
struct cdc_mbim_state *info = (void *)&dev->data;
int rv = 0;
dev_dbg(&dev->intf->dev, "%s() pmcount=%d, on=%d\n", __func__, atomic_read(&info->pmcount), on);
if ((on && atomic_add_return(1, &info->pmcount) == 1) || (!on && atomic_dec_and_test(&info->pmcount))) {
/* need autopm_get/put here to ensure the usbcore sees the new value */
rv = usb_autopm_get_interface(dev->intf);
dev->intf->needs_remote_wakeup = on;
if (!rv)
usb_autopm_put_interface(dev->intf);
}
return 0;
}
static int cdc_mbim_wdm_manage_power(struct usb_interface *intf, int status)
{
struct usbnet *dev = usb_get_intfdata(intf);
/* can be called while disconnecting */
if (!dev)
return 0;
return cdc_mbim_manage_power(dev, status);
}
net: cdc_mbim: optionally use VLAN ID 4094 for IP session 0 The cdc_mbim driver maps 802.1q VLANs to MBIM IP and DSS sessions. MBIM IP session 0 is handled as an exception and is mapped to untagged frames. This patch adds optional support for remapping MBIM IP session 0 to 802.1q VLAN ID 4094 instead. The default behaviour is not changed. The new behaviour is triggered by adding a link for this previously unsupported VLAN. The untagged mapping was chosen initially to support the assumed most common use case: Most current MBIM devices only support a single IP session (i.e. session 0 only), and using untagged frames lets the users completely ignore the additonal complexity of the multiplexing layer. But when the multiplexing features of MBIM are used, then this netdev gets a double meaning: It becomes the master interface for all the VLAN subdevs the additional sessions are mapped to, while still serving as the untagged IP interface for session 0. This can be problematic, especially when using Device Service Streams (DSS), as have become apparent recently with the availability of devices with real DSS support. Some use cases need to e.g set a MTU which is higher than allowed for IP Session 0. The dual role also leads to the situation where the IP Session 0 interface cannot be taken down without breaking unrelated IP or DSS sessions - a devastating side effect which applications managing a simple IP session cannot be expected to be aware of. A typical DHCP client will assume that it should bring the interface down after releasing the IP lease. These problems can be avoided by tagging IP session 0 packets too, making this session similar to all other multiplexed sessions. This redefines the main netdev as an upper master interface only. Cc: Greg Suarez <gsuarez@smithmicro.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-11 15:47:12 +07:00
static int cdc_mbim_rx_add_vid(struct net_device *netdev, __be16 proto, u16 vid)
{
struct usbnet *dev = netdev_priv(netdev);
struct cdc_mbim_state *info = (void *)&dev->data;
/* creation of this VLAN is a request to tag IP session 0 */
if (vid == MBIM_IPS0_VID)
info->flags |= FLAG_IPS0_VLAN;
else
if (vid >= 512) /* we don't map these to MBIM session */
return -EINVAL;
return 0;
}
static int cdc_mbim_rx_kill_vid(struct net_device *netdev, __be16 proto, u16 vid)
{
struct usbnet *dev = netdev_priv(netdev);
struct cdc_mbim_state *info = (void *)&dev->data;
/* this is a request for an untagged IP session 0 */
if (vid == MBIM_IPS0_VID)
info->flags &= ~FLAG_IPS0_VLAN;
return 0;
}
static const struct net_device_ops cdc_mbim_netdev_ops = {
.ndo_open = usbnet_open,
.ndo_stop = usbnet_stop,
.ndo_start_xmit = usbnet_start_xmit,
.ndo_tx_timeout = usbnet_tx_timeout,
.ndo_get_stats64 = usbnet_get_stats64,
.ndo_change_mtu = cdc_ncm_change_mtu,
net: cdc_mbim: optionally use VLAN ID 4094 for IP session 0 The cdc_mbim driver maps 802.1q VLANs to MBIM IP and DSS sessions. MBIM IP session 0 is handled as an exception and is mapped to untagged frames. This patch adds optional support for remapping MBIM IP session 0 to 802.1q VLAN ID 4094 instead. The default behaviour is not changed. The new behaviour is triggered by adding a link for this previously unsupported VLAN. The untagged mapping was chosen initially to support the assumed most common use case: Most current MBIM devices only support a single IP session (i.e. session 0 only), and using untagged frames lets the users completely ignore the additonal complexity of the multiplexing layer. But when the multiplexing features of MBIM are used, then this netdev gets a double meaning: It becomes the master interface for all the VLAN subdevs the additional sessions are mapped to, while still serving as the untagged IP interface for session 0. This can be problematic, especially when using Device Service Streams (DSS), as have become apparent recently with the availability of devices with real DSS support. Some use cases need to e.g set a MTU which is higher than allowed for IP Session 0. The dual role also leads to the situation where the IP Session 0 interface cannot be taken down without breaking unrelated IP or DSS sessions - a devastating side effect which applications managing a simple IP session cannot be expected to be aware of. A typical DHCP client will assume that it should bring the interface down after releasing the IP lease. These problems can be avoided by tagging IP session 0 packets too, making this session similar to all other multiplexed sessions. This redefines the main netdev as an upper master interface only. Cc: Greg Suarez <gsuarez@smithmicro.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-11 15:47:12 +07:00
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
.ndo_vlan_rx_add_vid = cdc_mbim_rx_add_vid,
.ndo_vlan_rx_kill_vid = cdc_mbim_rx_kill_vid,
};
/* Change the control interface altsetting and update the .driver_info
* pointer if the matching entry after changing class codes points to
* a different struct
*/
static int cdc_mbim_set_ctrlalt(struct usbnet *dev, struct usb_interface *intf, u8 alt)
{
struct usb_driver *driver = to_usb_driver(intf->dev.driver);
const struct usb_device_id *id;
struct driver_info *info;
int ret;
ret = usb_set_interface(dev->udev,
intf->cur_altsetting->desc.bInterfaceNumber,
alt);
if (ret)
return ret;
id = usb_match_id(intf, driver->id_table);
if (!id)
return -ENODEV;
info = (struct driver_info *)id->driver_info;
if (info != dev->driver_info) {
dev_dbg(&intf->dev, "driver_info updated to '%s'\n",
info->description);
dev->driver_info = info;
}
return 0;
}
static int cdc_mbim_bind(struct usbnet *dev, struct usb_interface *intf)
{
struct cdc_ncm_ctx *ctx;
struct usb_driver *subdriver = ERR_PTR(-ENODEV);
int ret = -ENODEV;
u8 data_altsetting = 1;
struct cdc_mbim_state *info = (void *)&dev->data;
/* should we change control altsetting on a NCM/MBIM function? */
if (cdc_ncm_select_altsetting(intf) == CDC_NCM_COMM_ALTSETTING_MBIM) {
data_altsetting = CDC_NCM_DATA_ALTSETTING_MBIM;
ret = cdc_mbim_set_ctrlalt(dev, intf, CDC_NCM_COMM_ALTSETTING_MBIM);
if (ret)
goto err;
ret = -ENODEV;
}
/* we will hit this for NCM/MBIM functions if prefer_mbim is false */
if (!cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
goto err;
ret = cdc_ncm_bind_common(dev, intf, data_altsetting, dev->driver_info->data);
if (ret)
goto err;
ctx = info->ctx;
/* The MBIM descriptor and the status endpoint are required */
if (ctx->mbim_desc && dev->status)
subdriver = usb_cdc_wdm_register(ctx->control,
&dev->status->desc,
le16_to_cpu(ctx->mbim_desc->wMaxControlMessage),
cdc_mbim_wdm_manage_power);
if (IS_ERR(subdriver)) {
ret = PTR_ERR(subdriver);
cdc_ncm_unbind(dev, intf);
goto err;
}
/* can't let usbnet use the interrupt endpoint */
dev->status = NULL;
info->subdriver = subdriver;
/* MBIM cannot do ARP */
dev->net->flags |= IFF_NOARP;
/* no need to put the VLAN tci in the packet headers */
net: cdc_mbim: optionally use VLAN ID 4094 for IP session 0 The cdc_mbim driver maps 802.1q VLANs to MBIM IP and DSS sessions. MBIM IP session 0 is handled as an exception and is mapped to untagged frames. This patch adds optional support for remapping MBIM IP session 0 to 802.1q VLAN ID 4094 instead. The default behaviour is not changed. The new behaviour is triggered by adding a link for this previously unsupported VLAN. The untagged mapping was chosen initially to support the assumed most common use case: Most current MBIM devices only support a single IP session (i.e. session 0 only), and using untagged frames lets the users completely ignore the additonal complexity of the multiplexing layer. But when the multiplexing features of MBIM are used, then this netdev gets a double meaning: It becomes the master interface for all the VLAN subdevs the additional sessions are mapped to, while still serving as the untagged IP interface for session 0. This can be problematic, especially when using Device Service Streams (DSS), as have become apparent recently with the availability of devices with real DSS support. Some use cases need to e.g set a MTU which is higher than allowed for IP Session 0. The dual role also leads to the situation where the IP Session 0 interface cannot be taken down without breaking unrelated IP or DSS sessions - a devastating side effect which applications managing a simple IP session cannot be expected to be aware of. A typical DHCP client will assume that it should bring the interface down after releasing the IP lease. These problems can be avoided by tagging IP session 0 packets too, making this session similar to all other multiplexed sessions. This redefines the main netdev as an upper master interface only. Cc: Greg Suarez <gsuarez@smithmicro.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-11 15:47:12 +07:00
dev->net->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_FILTER;
/* monitor VLAN additions and removals */
dev->net->netdev_ops = &cdc_mbim_netdev_ops;
err:
return ret;
}
static void cdc_mbim_unbind(struct usbnet *dev, struct usb_interface *intf)
{
struct cdc_mbim_state *info = (void *)&dev->data;
struct cdc_ncm_ctx *ctx = info->ctx;
/* disconnect subdriver from control interface */
if (info->subdriver && info->subdriver->disconnect)
info->subdriver->disconnect(ctx->control);
info->subdriver = NULL;
/* let NCM unbind clean up both control and data interface */
cdc_ncm_unbind(dev, intf);
}
/* verify that the ethernet protocol is IPv4 or IPv6 */
static bool is_ip_proto(__be16 proto)
{
switch (proto) {
case htons(ETH_P_IP):
case htons(ETH_P_IPV6):
return true;
}
return false;
}
static struct sk_buff *cdc_mbim_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
{
struct sk_buff *skb_out;
struct cdc_mbim_state *info = (void *)&dev->data;
struct cdc_ncm_ctx *ctx = info->ctx;
__le32 sign = cpu_to_le32(USB_CDC_MBIM_NDP16_IPS_SIGN);
u16 tci = 0;
bool is_ip;
u8 *c;
if (!ctx)
goto error;
if (skb) {
if (skb->len <= ETH_HLEN)
goto error;
/* Some applications using e.g. packet sockets will
* bypass the VLAN acceleration and create tagged
* ethernet frames directly. We primarily look for
* the accelerated out-of-band tag, but fall back if
* required
*/
skb_reset_mac_header(skb);
if (vlan_get_tag(skb, &tci) < 0 && skb->len > VLAN_ETH_HLEN &&
__vlan_get_tag(skb, &tci) == 0) {
is_ip = is_ip_proto(vlan_eth_hdr(skb)->h_vlan_encapsulated_proto);
skb_pull(skb, VLAN_ETH_HLEN);
} else {
is_ip = is_ip_proto(eth_hdr(skb)->h_proto);
skb_pull(skb, ETH_HLEN);
}
net: cdc_mbim: optionally use VLAN ID 4094 for IP session 0 The cdc_mbim driver maps 802.1q VLANs to MBIM IP and DSS sessions. MBIM IP session 0 is handled as an exception and is mapped to untagged frames. This patch adds optional support for remapping MBIM IP session 0 to 802.1q VLAN ID 4094 instead. The default behaviour is not changed. The new behaviour is triggered by adding a link for this previously unsupported VLAN. The untagged mapping was chosen initially to support the assumed most common use case: Most current MBIM devices only support a single IP session (i.e. session 0 only), and using untagged frames lets the users completely ignore the additonal complexity of the multiplexing layer. But when the multiplexing features of MBIM are used, then this netdev gets a double meaning: It becomes the master interface for all the VLAN subdevs the additional sessions are mapped to, while still serving as the untagged IP interface for session 0. This can be problematic, especially when using Device Service Streams (DSS), as have become apparent recently with the availability of devices with real DSS support. Some use cases need to e.g set a MTU which is higher than allowed for IP Session 0. The dual role also leads to the situation where the IP Session 0 interface cannot be taken down without breaking unrelated IP or DSS sessions - a devastating side effect which applications managing a simple IP session cannot be expected to be aware of. A typical DHCP client will assume that it should bring the interface down after releasing the IP lease. These problems can be avoided by tagging IP session 0 packets too, making this session similar to all other multiplexed sessions. This redefines the main netdev as an upper master interface only. Cc: Greg Suarez <gsuarez@smithmicro.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-11 15:47:12 +07:00
/* Is IP session <0> tagged too? */
if (info->flags & FLAG_IPS0_VLAN) {
/* drop all untagged packets */
if (!tci)
goto error;
/* map MBIM_IPS0_VID to IPS<0> */
if (tci == MBIM_IPS0_VID)
tci = 0;
}
/* mapping VLANs to MBIM sessions:
net: cdc_mbim: optionally use VLAN ID 4094 for IP session 0 The cdc_mbim driver maps 802.1q VLANs to MBIM IP and DSS sessions. MBIM IP session 0 is handled as an exception and is mapped to untagged frames. This patch adds optional support for remapping MBIM IP session 0 to 802.1q VLAN ID 4094 instead. The default behaviour is not changed. The new behaviour is triggered by adding a link for this previously unsupported VLAN. The untagged mapping was chosen initially to support the assumed most common use case: Most current MBIM devices only support a single IP session (i.e. session 0 only), and using untagged frames lets the users completely ignore the additonal complexity of the multiplexing layer. But when the multiplexing features of MBIM are used, then this netdev gets a double meaning: It becomes the master interface for all the VLAN subdevs the additional sessions are mapped to, while still serving as the untagged IP interface for session 0. This can be problematic, especially when using Device Service Streams (DSS), as have become apparent recently with the availability of devices with real DSS support. Some use cases need to e.g set a MTU which is higher than allowed for IP Session 0. The dual role also leads to the situation where the IP Session 0 interface cannot be taken down without breaking unrelated IP or DSS sessions - a devastating side effect which applications managing a simple IP session cannot be expected to be aware of. A typical DHCP client will assume that it should bring the interface down after releasing the IP lease. These problems can be avoided by tagging IP session 0 packets too, making this session similar to all other multiplexed sessions. This redefines the main netdev as an upper master interface only. Cc: Greg Suarez <gsuarez@smithmicro.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-11 15:47:12 +07:00
* no tag => IPS session <0> if !FLAG_IPS0_VLAN
* 1 - 255 => IPS session <vlanid>
* 256 - 511 => DSS session <vlanid - 256>
net: cdc_mbim: optionally use VLAN ID 4094 for IP session 0 The cdc_mbim driver maps 802.1q VLANs to MBIM IP and DSS sessions. MBIM IP session 0 is handled as an exception and is mapped to untagged frames. This patch adds optional support for remapping MBIM IP session 0 to 802.1q VLAN ID 4094 instead. The default behaviour is not changed. The new behaviour is triggered by adding a link for this previously unsupported VLAN. The untagged mapping was chosen initially to support the assumed most common use case: Most current MBIM devices only support a single IP session (i.e. session 0 only), and using untagged frames lets the users completely ignore the additonal complexity of the multiplexing layer. But when the multiplexing features of MBIM are used, then this netdev gets a double meaning: It becomes the master interface for all the VLAN subdevs the additional sessions are mapped to, while still serving as the untagged IP interface for session 0. This can be problematic, especially when using Device Service Streams (DSS), as have become apparent recently with the availability of devices with real DSS support. Some use cases need to e.g set a MTU which is higher than allowed for IP Session 0. The dual role also leads to the situation where the IP Session 0 interface cannot be taken down without breaking unrelated IP or DSS sessions - a devastating side effect which applications managing a simple IP session cannot be expected to be aware of. A typical DHCP client will assume that it should bring the interface down after releasing the IP lease. These problems can be avoided by tagging IP session 0 packets too, making this session similar to all other multiplexed sessions. This redefines the main netdev as an upper master interface only. Cc: Greg Suarez <gsuarez@smithmicro.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-11 15:47:12 +07:00
* 512 - 4093 => unsupported, drop
* 4094 => IPS session <0> if FLAG_IPS0_VLAN
*/
net: cdc_mbim: optionally use VLAN ID 4094 for IP session 0 The cdc_mbim driver maps 802.1q VLANs to MBIM IP and DSS sessions. MBIM IP session 0 is handled as an exception and is mapped to untagged frames. This patch adds optional support for remapping MBIM IP session 0 to 802.1q VLAN ID 4094 instead. The default behaviour is not changed. The new behaviour is triggered by adding a link for this previously unsupported VLAN. The untagged mapping was chosen initially to support the assumed most common use case: Most current MBIM devices only support a single IP session (i.e. session 0 only), and using untagged frames lets the users completely ignore the additonal complexity of the multiplexing layer. But when the multiplexing features of MBIM are used, then this netdev gets a double meaning: It becomes the master interface for all the VLAN subdevs the additional sessions are mapped to, while still serving as the untagged IP interface for session 0. This can be problematic, especially when using Device Service Streams (DSS), as have become apparent recently with the availability of devices with real DSS support. Some use cases need to e.g set a MTU which is higher than allowed for IP Session 0. The dual role also leads to the situation where the IP Session 0 interface cannot be taken down without breaking unrelated IP or DSS sessions - a devastating side effect which applications managing a simple IP session cannot be expected to be aware of. A typical DHCP client will assume that it should bring the interface down after releasing the IP lease. These problems can be avoided by tagging IP session 0 packets too, making this session similar to all other multiplexed sessions. This redefines the main netdev as an upper master interface only. Cc: Greg Suarez <gsuarez@smithmicro.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-11 15:47:12 +07:00
switch (tci & 0x0f00) {
case 0x0000: /* VLAN ID 0 - 255 */
if (!is_ip)
goto error;
c = (u8 *)&sign;
c[3] = tci;
break;
case 0x0100: /* VLAN ID 256 - 511 */
if (is_ip)
goto error;
sign = cpu_to_le32(USB_CDC_MBIM_NDP16_DSS_SIGN);
c = (u8 *)&sign;
c[3] = tci;
break;
default:
netif_err(dev, tx_err, dev->net,
"unsupported tci=0x%04x\n", tci);
goto error;
}
}
spin_lock_bh(&ctx->mtx);
skb_out = cdc_ncm_fill_tx_frame(dev, skb, sign);
spin_unlock_bh(&ctx->mtx);
return skb_out;
error:
if (skb)
dev_kfree_skb_any(skb);
return NULL;
}
/* Some devices are known to send Neigbor Solicitation messages and
* require Neigbor Advertisement replies. The IPv6 core will not
* respond since IFF_NOARP is set, so we must handle them ourselves.
*/
static void do_neigh_solicit(struct usbnet *dev, u8 *buf, u16 tci)
{
struct ipv6hdr *iph = (void *)buf;
struct nd_msg *msg = (void *)(iph + 1);
struct net_device *netdev;
struct inet6_dev *in6_dev;
bool is_router;
/* we'll only respond to requests from unicast addresses to
* our solicited node addresses.
*/
if (!ipv6_addr_is_solict_mult(&iph->daddr) ||
!(ipv6_addr_type(&iph->saddr) & IPV6_ADDR_UNICAST))
return;
/* need to send the NA on the VLAN dev, if any */
net: cdc_mbim: __vlan_find_dev_deep need rcu_read_lock Fixes this warning introduced by commit 5b8f15f78e6f ("net: cdc_mbim: handle IPv6 Neigbor Solicitations"): =============================== [ INFO: suspicious RCU usage. ] 3.15.0-rc3 #213 Tainted: G W O ------------------------------- net/8021q/vlan_core.c:69 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 1 no locks held by ksoftirqd/0/3. stack backtrace: CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: G W O 3.15.0-rc3 #213 Hardware name: LENOVO 2776LEG/2776LEG, BIOS 6EET55WW (3.15 ) 12/19/2011 0000000000000001 ffff880232533bf0 ffffffff813a5ee6 0000000000000006 ffff880232530090 ffff880232533c20 ffffffff81076b94 0000000000000081 0000000000000000 ffff8802085ac000 ffff88007fc8ea00 ffff880232533c50 Call Trace: [<ffffffff813a5ee6>] dump_stack+0x4e/0x68 [<ffffffff81076b94>] lockdep_rcu_suspicious+0xfa/0x103 [<ffffffff813978a6>] __vlan_find_dev_deep+0x54/0x94 [<ffffffffa04a1938>] cdc_mbim_rx_fixup+0x379/0x66a [cdc_mbim] [<ffffffff813ab76f>] ? _raw_spin_unlock_irqrestore+0x3a/0x49 [<ffffffff81079671>] ? trace_hardirqs_on_caller+0x192/0x1a1 [<ffffffffa059bd10>] usbnet_bh+0x59/0x287 [usbnet] [<ffffffff8104067d>] tasklet_action+0xbb/0xcd [<ffffffff81040057>] __do_softirq+0x14c/0x30d [<ffffffff81040237>] run_ksoftirqd+0x1f/0x50 [<ffffffff8105f13e>] smpboot_thread_fn+0x172/0x18e [<ffffffff8105efcc>] ? SyS_setgroups+0xdf/0xdf [<ffffffff810594b0>] kthread+0xb5/0xbd [<ffffffff813a84b1>] ? __wait_for_common+0x13b/0x170 [<ffffffff810593fb>] ? __kthread_parkme+0x5c/0x5c [<ffffffff813b147c>] ret_from_fork+0x7c/0xb0 [<ffffffff810593fb>] ? __kthread_parkme+0x5c/0x5c Fixes: 5b8f15f78e6f ("net: cdc_mbim: handle IPv6 Neigbor Solicitations") Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-03 21:12:47 +07:00
rcu_read_lock();
if (tci) {
netdev = __vlan_find_dev_deep_rcu(dev->net, htons(ETH_P_8021Q),
tci);
net: cdc_mbim: __vlan_find_dev_deep need rcu_read_lock Fixes this warning introduced by commit 5b8f15f78e6f ("net: cdc_mbim: handle IPv6 Neigbor Solicitations"): =============================== [ INFO: suspicious RCU usage. ] 3.15.0-rc3 #213 Tainted: G W O ------------------------------- net/8021q/vlan_core.c:69 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 1 no locks held by ksoftirqd/0/3. stack backtrace: CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: G W O 3.15.0-rc3 #213 Hardware name: LENOVO 2776LEG/2776LEG, BIOS 6EET55WW (3.15 ) 12/19/2011 0000000000000001 ffff880232533bf0 ffffffff813a5ee6 0000000000000006 ffff880232530090 ffff880232533c20 ffffffff81076b94 0000000000000081 0000000000000000 ffff8802085ac000 ffff88007fc8ea00 ffff880232533c50 Call Trace: [<ffffffff813a5ee6>] dump_stack+0x4e/0x68 [<ffffffff81076b94>] lockdep_rcu_suspicious+0xfa/0x103 [<ffffffff813978a6>] __vlan_find_dev_deep+0x54/0x94 [<ffffffffa04a1938>] cdc_mbim_rx_fixup+0x379/0x66a [cdc_mbim] [<ffffffff813ab76f>] ? _raw_spin_unlock_irqrestore+0x3a/0x49 [<ffffffff81079671>] ? trace_hardirqs_on_caller+0x192/0x1a1 [<ffffffffa059bd10>] usbnet_bh+0x59/0x287 [usbnet] [<ffffffff8104067d>] tasklet_action+0xbb/0xcd [<ffffffff81040057>] __do_softirq+0x14c/0x30d [<ffffffff81040237>] run_ksoftirqd+0x1f/0x50 [<ffffffff8105f13e>] smpboot_thread_fn+0x172/0x18e [<ffffffff8105efcc>] ? SyS_setgroups+0xdf/0xdf [<ffffffff810594b0>] kthread+0xb5/0xbd [<ffffffff813a84b1>] ? __wait_for_common+0x13b/0x170 [<ffffffff810593fb>] ? __kthread_parkme+0x5c/0x5c [<ffffffff813b147c>] ret_from_fork+0x7c/0xb0 [<ffffffff810593fb>] ? __kthread_parkme+0x5c/0x5c Fixes: 5b8f15f78e6f ("net: cdc_mbim: handle IPv6 Neigbor Solicitations") Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-03 21:12:47 +07:00
if (!netdev) {
rcu_read_unlock();
return;
}
} else {
netdev = dev->net;
net: cdc_mbim: __vlan_find_dev_deep need rcu_read_lock Fixes this warning introduced by commit 5b8f15f78e6f ("net: cdc_mbim: handle IPv6 Neigbor Solicitations"): =============================== [ INFO: suspicious RCU usage. ] 3.15.0-rc3 #213 Tainted: G W O ------------------------------- net/8021q/vlan_core.c:69 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 1 no locks held by ksoftirqd/0/3. stack backtrace: CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: G W O 3.15.0-rc3 #213 Hardware name: LENOVO 2776LEG/2776LEG, BIOS 6EET55WW (3.15 ) 12/19/2011 0000000000000001 ffff880232533bf0 ffffffff813a5ee6 0000000000000006 ffff880232530090 ffff880232533c20 ffffffff81076b94 0000000000000081 0000000000000000 ffff8802085ac000 ffff88007fc8ea00 ffff880232533c50 Call Trace: [<ffffffff813a5ee6>] dump_stack+0x4e/0x68 [<ffffffff81076b94>] lockdep_rcu_suspicious+0xfa/0x103 [<ffffffff813978a6>] __vlan_find_dev_deep+0x54/0x94 [<ffffffffa04a1938>] cdc_mbim_rx_fixup+0x379/0x66a [cdc_mbim] [<ffffffff813ab76f>] ? _raw_spin_unlock_irqrestore+0x3a/0x49 [<ffffffff81079671>] ? trace_hardirqs_on_caller+0x192/0x1a1 [<ffffffffa059bd10>] usbnet_bh+0x59/0x287 [usbnet] [<ffffffff8104067d>] tasklet_action+0xbb/0xcd [<ffffffff81040057>] __do_softirq+0x14c/0x30d [<ffffffff81040237>] run_ksoftirqd+0x1f/0x50 [<ffffffff8105f13e>] smpboot_thread_fn+0x172/0x18e [<ffffffff8105efcc>] ? SyS_setgroups+0xdf/0xdf [<ffffffff810594b0>] kthread+0xb5/0xbd [<ffffffff813a84b1>] ? __wait_for_common+0x13b/0x170 [<ffffffff810593fb>] ? __kthread_parkme+0x5c/0x5c [<ffffffff813b147c>] ret_from_fork+0x7c/0xb0 [<ffffffff810593fb>] ? __kthread_parkme+0x5c/0x5c Fixes: 5b8f15f78e6f ("net: cdc_mbim: handle IPv6 Neigbor Solicitations") Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-03 21:12:47 +07:00
}
dev_hold(netdev);
rcu_read_unlock();
in6_dev = in6_dev_get(netdev);
if (!in6_dev)
net: cdc_mbim: __vlan_find_dev_deep need rcu_read_lock Fixes this warning introduced by commit 5b8f15f78e6f ("net: cdc_mbim: handle IPv6 Neigbor Solicitations"): =============================== [ INFO: suspicious RCU usage. ] 3.15.0-rc3 #213 Tainted: G W O ------------------------------- net/8021q/vlan_core.c:69 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 1 no locks held by ksoftirqd/0/3. stack backtrace: CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: G W O 3.15.0-rc3 #213 Hardware name: LENOVO 2776LEG/2776LEG, BIOS 6EET55WW (3.15 ) 12/19/2011 0000000000000001 ffff880232533bf0 ffffffff813a5ee6 0000000000000006 ffff880232530090 ffff880232533c20 ffffffff81076b94 0000000000000081 0000000000000000 ffff8802085ac000 ffff88007fc8ea00 ffff880232533c50 Call Trace: [<ffffffff813a5ee6>] dump_stack+0x4e/0x68 [<ffffffff81076b94>] lockdep_rcu_suspicious+0xfa/0x103 [<ffffffff813978a6>] __vlan_find_dev_deep+0x54/0x94 [<ffffffffa04a1938>] cdc_mbim_rx_fixup+0x379/0x66a [cdc_mbim] [<ffffffff813ab76f>] ? _raw_spin_unlock_irqrestore+0x3a/0x49 [<ffffffff81079671>] ? trace_hardirqs_on_caller+0x192/0x1a1 [<ffffffffa059bd10>] usbnet_bh+0x59/0x287 [usbnet] [<ffffffff8104067d>] tasklet_action+0xbb/0xcd [<ffffffff81040057>] __do_softirq+0x14c/0x30d [<ffffffff81040237>] run_ksoftirqd+0x1f/0x50 [<ffffffff8105f13e>] smpboot_thread_fn+0x172/0x18e [<ffffffff8105efcc>] ? SyS_setgroups+0xdf/0xdf [<ffffffff810594b0>] kthread+0xb5/0xbd [<ffffffff813a84b1>] ? __wait_for_common+0x13b/0x170 [<ffffffff810593fb>] ? __kthread_parkme+0x5c/0x5c [<ffffffff813b147c>] ret_from_fork+0x7c/0xb0 [<ffffffff810593fb>] ? __kthread_parkme+0x5c/0x5c Fixes: 5b8f15f78e6f ("net: cdc_mbim: handle IPv6 Neigbor Solicitations") Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-03 21:12:47 +07:00
goto out;
is_router = !!in6_dev->cnf.forwarding;
in6_dev_put(in6_dev);
/* ipv6_stub != NULL if in6_dev_get returned an inet6_dev */
ipv6_stub->ndisc_send_na(netdev, &iph->saddr, &msg->target,
is_router /* router */,
true /* solicited */,
false /* override */,
true /* inc_opt */);
net: cdc_mbim: __vlan_find_dev_deep need rcu_read_lock Fixes this warning introduced by commit 5b8f15f78e6f ("net: cdc_mbim: handle IPv6 Neigbor Solicitations"): =============================== [ INFO: suspicious RCU usage. ] 3.15.0-rc3 #213 Tainted: G W O ------------------------------- net/8021q/vlan_core.c:69 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 1 no locks held by ksoftirqd/0/3. stack backtrace: CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: G W O 3.15.0-rc3 #213 Hardware name: LENOVO 2776LEG/2776LEG, BIOS 6EET55WW (3.15 ) 12/19/2011 0000000000000001 ffff880232533bf0 ffffffff813a5ee6 0000000000000006 ffff880232530090 ffff880232533c20 ffffffff81076b94 0000000000000081 0000000000000000 ffff8802085ac000 ffff88007fc8ea00 ffff880232533c50 Call Trace: [<ffffffff813a5ee6>] dump_stack+0x4e/0x68 [<ffffffff81076b94>] lockdep_rcu_suspicious+0xfa/0x103 [<ffffffff813978a6>] __vlan_find_dev_deep+0x54/0x94 [<ffffffffa04a1938>] cdc_mbim_rx_fixup+0x379/0x66a [cdc_mbim] [<ffffffff813ab76f>] ? _raw_spin_unlock_irqrestore+0x3a/0x49 [<ffffffff81079671>] ? trace_hardirqs_on_caller+0x192/0x1a1 [<ffffffffa059bd10>] usbnet_bh+0x59/0x287 [usbnet] [<ffffffff8104067d>] tasklet_action+0xbb/0xcd [<ffffffff81040057>] __do_softirq+0x14c/0x30d [<ffffffff81040237>] run_ksoftirqd+0x1f/0x50 [<ffffffff8105f13e>] smpboot_thread_fn+0x172/0x18e [<ffffffff8105efcc>] ? SyS_setgroups+0xdf/0xdf [<ffffffff810594b0>] kthread+0xb5/0xbd [<ffffffff813a84b1>] ? __wait_for_common+0x13b/0x170 [<ffffffff810593fb>] ? __kthread_parkme+0x5c/0x5c [<ffffffff813b147c>] ret_from_fork+0x7c/0xb0 [<ffffffff810593fb>] ? __kthread_parkme+0x5c/0x5c Fixes: 5b8f15f78e6f ("net: cdc_mbim: handle IPv6 Neigbor Solicitations") Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-03 21:12:47 +07:00
out:
dev_put(netdev);
}
static bool is_neigh_solicit(u8 *buf, size_t len)
{
struct ipv6hdr *iph = (void *)buf;
struct nd_msg *msg = (void *)(iph + 1);
return (len >= sizeof(struct ipv6hdr) + sizeof(struct nd_msg) &&
iph->nexthdr == IPPROTO_ICMPV6 &&
msg->icmph.icmp6_code == 0 &&
msg->icmph.icmp6_type == NDISC_NEIGHBOUR_SOLICITATION);
}
static struct sk_buff *cdc_mbim_process_dgram(struct usbnet *dev, u8 *buf, size_t len, u16 tci)
{
__be16 proto = htons(ETH_P_802_3);
struct sk_buff *skb = NULL;
net: cdc_mbim: optionally use VLAN ID 4094 for IP session 0 The cdc_mbim driver maps 802.1q VLANs to MBIM IP and DSS sessions. MBIM IP session 0 is handled as an exception and is mapped to untagged frames. This patch adds optional support for remapping MBIM IP session 0 to 802.1q VLAN ID 4094 instead. The default behaviour is not changed. The new behaviour is triggered by adding a link for this previously unsupported VLAN. The untagged mapping was chosen initially to support the assumed most common use case: Most current MBIM devices only support a single IP session (i.e. session 0 only), and using untagged frames lets the users completely ignore the additonal complexity of the multiplexing layer. But when the multiplexing features of MBIM are used, then this netdev gets a double meaning: It becomes the master interface for all the VLAN subdevs the additional sessions are mapped to, while still serving as the untagged IP interface for session 0. This can be problematic, especially when using Device Service Streams (DSS), as have become apparent recently with the availability of devices with real DSS support. Some use cases need to e.g set a MTU which is higher than allowed for IP Session 0. The dual role also leads to the situation where the IP Session 0 interface cannot be taken down without breaking unrelated IP or DSS sessions - a devastating side effect which applications managing a simple IP session cannot be expected to be aware of. A typical DHCP client will assume that it should bring the interface down after releasing the IP lease. These problems can be avoided by tagging IP session 0 packets too, making this session similar to all other multiplexed sessions. This redefines the main netdev as an upper master interface only. Cc: Greg Suarez <gsuarez@smithmicro.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-11 15:47:12 +07:00
if (tci < 256 || tci == MBIM_IPS0_VID) { /* IPS session? */
if (len < sizeof(struct iphdr))
goto err;
switch (*buf & 0xf0) {
case 0x40:
proto = htons(ETH_P_IP);
break;
case 0x60:
if (is_neigh_solicit(buf, len))
do_neigh_solicit(dev, buf, tci);
proto = htons(ETH_P_IPV6);
break;
default:
goto err;
}
}
skb = netdev_alloc_skb_ip_align(dev->net, len + ETH_HLEN);
if (!skb)
goto err;
/* add an ethernet header */
skb_put(skb, ETH_HLEN);
skb_reset_mac_header(skb);
eth_hdr(skb)->h_proto = proto;
eth_zero_addr(eth_hdr(skb)->h_source);
memcpy(eth_hdr(skb)->h_dest, dev->net->dev_addr, ETH_ALEN);
/* add datagram */
skb_put_data(skb, buf, len);
/* map MBIM session to VLAN */
if (tci)
__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), tci);
err:
return skb;
}
static int cdc_mbim_rx_fixup(struct usbnet *dev, struct sk_buff *skb_in)
{
struct sk_buff *skb;
struct cdc_mbim_state *info = (void *)&dev->data;
struct cdc_ncm_ctx *ctx = info->ctx;
int len;
int nframes;
int x;
int offset;
struct usb_cdc_ncm_ndp16 *ndp16;
struct usb_cdc_ncm_dpe16 *dpe16;
int ndpoffset;
int loopcount = 50; /* arbitrary max preventing infinite loop */
u32 payload = 0;
u8 *c;
u16 tci;
ndpoffset = cdc_ncm_rx_verify_nth16(ctx, skb_in);
if (ndpoffset < 0)
goto error;
next_ndp:
nframes = cdc_ncm_rx_verify_ndp16(skb_in, ndpoffset);
if (nframes < 0)
goto error;
ndp16 = (struct usb_cdc_ncm_ndp16 *)(skb_in->data + ndpoffset);
switch (ndp16->dwSignature & cpu_to_le32(0x00ffffff)) {
case cpu_to_le32(USB_CDC_MBIM_NDP16_IPS_SIGN):
c = (u8 *)&ndp16->dwSignature;
tci = c[3];
net: cdc_mbim: optionally use VLAN ID 4094 for IP session 0 The cdc_mbim driver maps 802.1q VLANs to MBIM IP and DSS sessions. MBIM IP session 0 is handled as an exception and is mapped to untagged frames. This patch adds optional support for remapping MBIM IP session 0 to 802.1q VLAN ID 4094 instead. The default behaviour is not changed. The new behaviour is triggered by adding a link for this previously unsupported VLAN. The untagged mapping was chosen initially to support the assumed most common use case: Most current MBIM devices only support a single IP session (i.e. session 0 only), and using untagged frames lets the users completely ignore the additonal complexity of the multiplexing layer. But when the multiplexing features of MBIM are used, then this netdev gets a double meaning: It becomes the master interface for all the VLAN subdevs the additional sessions are mapped to, while still serving as the untagged IP interface for session 0. This can be problematic, especially when using Device Service Streams (DSS), as have become apparent recently with the availability of devices with real DSS support. Some use cases need to e.g set a MTU which is higher than allowed for IP Session 0. The dual role also leads to the situation where the IP Session 0 interface cannot be taken down without breaking unrelated IP or DSS sessions - a devastating side effect which applications managing a simple IP session cannot be expected to be aware of. A typical DHCP client will assume that it should bring the interface down after releasing the IP lease. These problems can be avoided by tagging IP session 0 packets too, making this session similar to all other multiplexed sessions. This redefines the main netdev as an upper master interface only. Cc: Greg Suarez <gsuarez@smithmicro.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-11 15:47:12 +07:00
/* tag IPS<0> packets too if MBIM_IPS0_VID exists */
if (!tci && info->flags & FLAG_IPS0_VLAN)
tci = MBIM_IPS0_VID;
break;
case cpu_to_le32(USB_CDC_MBIM_NDP16_DSS_SIGN):
c = (u8 *)&ndp16->dwSignature;
tci = c[3] + 256;
break;
default:
netif_dbg(dev, rx_err, dev->net,
"unsupported NDP signature <0x%08x>\n",
le32_to_cpu(ndp16->dwSignature));
goto err_ndp;
}
dpe16 = ndp16->dpe16;
for (x = 0; x < nframes; x++, dpe16++) {
offset = le16_to_cpu(dpe16->wDatagramIndex);
len = le16_to_cpu(dpe16->wDatagramLength);
/*
* CDC NCM ch. 3.7
* All entries after first NULL entry are to be ignored
*/
if ((offset == 0) || (len == 0)) {
if (!x)
goto err_ndp; /* empty NTB */
break;
}
/* sanity checking */
if (((offset + len) > skb_in->len) || (len > ctx->rx_max)) {
netif_dbg(dev, rx_err, dev->net,
"invalid frame detected (ignored) offset[%u]=%u, length=%u, skb=%p\n",
x, offset, len, skb_in);
if (!x)
goto err_ndp;
break;
} else {
skb = cdc_mbim_process_dgram(dev, skb_in->data + offset, len, tci);
if (!skb)
goto error;
usbnet_skb_return(dev, skb);
payload += len; /* count payload bytes in this NTB */
}
}
err_ndp:
/* are there more NDPs to process? */
ndpoffset = le16_to_cpu(ndp16->wNextNdpIndex);
if (ndpoffset && loopcount--)
goto next_ndp;
/* update stats */
ctx->rx_overhead += skb_in->len - payload;
ctx->rx_ntbs++;
return 1;
error:
return 0;
}
static int cdc_mbim_suspend(struct usb_interface *intf, pm_message_t message)
{
int ret = -ENODEV;
struct usbnet *dev = usb_get_intfdata(intf);
struct cdc_mbim_state *info = (void *)&dev->data;
struct cdc_ncm_ctx *ctx = info->ctx;
if (!ctx)
goto error;
/*
* Both usbnet_suspend() and subdriver->suspend() MUST return 0
* in system sleep context, otherwise, the resume callback has
* to recover device from previous suspend failure.
*/
ret = usbnet_suspend(intf, message);
if (ret < 0)
goto error;
if (intf == ctx->control && info->subdriver && info->subdriver->suspend)
ret = info->subdriver->suspend(intf, message);
if (ret < 0)
usbnet_resume(intf);
error:
return ret;
}
static int cdc_mbim_resume(struct usb_interface *intf)
{
int ret = 0;
struct usbnet *dev = usb_get_intfdata(intf);
struct cdc_mbim_state *info = (void *)&dev->data;
struct cdc_ncm_ctx *ctx = info->ctx;
bool callsub = (intf == ctx->control && info->subdriver && info->subdriver->resume);
if (callsub)
ret = info->subdriver->resume(intf);
if (ret < 0)
goto err;
ret = usbnet_resume(intf);
if (ret < 0 && callsub)
info->subdriver->suspend(intf, PMSG_SUSPEND);
err:
return ret;
}
static const struct driver_info cdc_mbim_info = {
.description = "CDC MBIM",
.flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN,
.bind = cdc_mbim_bind,
.unbind = cdc_mbim_unbind,
.manage_power = cdc_mbim_manage_power,
.rx_fixup = cdc_mbim_rx_fixup,
.tx_fixup = cdc_mbim_tx_fixup,
};
/* MBIM and NCM devices should not need a ZLP after NTBs with
* dwNtbOutMaxSize length. Nevertheless, a number of devices from
* different vendor IDs will fail unless we send ZLPs, forcing us
* to make this the default.
*
* This default may cause a performance penalty for spec conforming
* devices wanting to take advantage of optimizations possible without
* ZLPs. A whitelist is added in an attempt to avoid this for devices
* known to conform to the MBIM specification.
*
* All known devices supporting NCM compatibility mode are also
* conforming to the NCM and MBIM specifications. For this reason, the
* NCM subclass entry is also in the ZLP whitelist.
*/
static const struct driver_info cdc_mbim_info_zlp = {
.description = "CDC MBIM",
.flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN | FLAG_SEND_ZLP,
.bind = cdc_mbim_bind,
.unbind = cdc_mbim_unbind,
.manage_power = cdc_mbim_manage_power,
.rx_fixup = cdc_mbim_rx_fixup,
.tx_fixup = cdc_mbim_tx_fixup,
};
/* The spefication explicitly allows NDPs to be placed anywhere in the
* frame, but some devices fail unless the NDP is placed after the IP
* packets. Using the CDC_NCM_FLAG_NDP_TO_END flags to force this
* behaviour.
*
* Note: The current implementation of this feature restricts each NTB
* to a single NDP, implying that multiplexed sessions cannot share an
* NTB. This might affect performace for multiplexed sessions.
*/
static const struct driver_info cdc_mbim_info_ndp_to_end = {
.description = "CDC MBIM",
.flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN,
.bind = cdc_mbim_bind,
.unbind = cdc_mbim_unbind,
.manage_power = cdc_mbim_manage_power,
.rx_fixup = cdc_mbim_rx_fixup,
.tx_fixup = cdc_mbim_tx_fixup,
.data = CDC_NCM_FLAG_NDP_TO_END,
};
/* Some modems (e.g. Telit LE922A6) do not work properly with altsetting
* toggle done in cdc_ncm_bind_common. CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE
* flag is used to avoid this procedure.
*/
static const struct driver_info cdc_mbim_info_avoid_altsetting_toggle = {
.description = "CDC MBIM",
.flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN | FLAG_SEND_ZLP,
.bind = cdc_mbim_bind,
.unbind = cdc_mbim_unbind,
.manage_power = cdc_mbim_manage_power,
.rx_fixup = cdc_mbim_rx_fixup,
.tx_fixup = cdc_mbim_tx_fixup,
.data = CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE,
};
static const struct usb_device_id mbim_devs[] = {
/* This duplicate NCM entry is intentional. MBIM devices can
* be disguised as NCM by default, and this is necessary to
* allow us to bind the correct driver_info to such devices.
*
* bind() will sort out this for us, selecting the correct
* entry and reject the other
*/
{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE),
.driver_info = (unsigned long)&cdc_mbim_info,
},
/* ZLP conformance whitelist: All Ericsson MBIM devices */
{ USB_VENDOR_AND_INTERFACE_INFO(0x0bdb, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
.driver_info = (unsigned long)&cdc_mbim_info,
},
/* Some Huawei devices, ME906s-158 (12d1:15c1) and E3372
* (12d1:157d), are known to fail unless the NDP is placed
* after the IP packets. Applying the quirk to all Huawei
* devices is broader than necessary, but harmless.
*/
{ USB_VENDOR_AND_INTERFACE_INFO(0x12d1, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
.driver_info = (unsigned long)&cdc_mbim_info_ndp_to_end,
},
/* The HP lt4132 (03f0:a31d) is a rebranded Huawei ME906s-158,
* therefore it too requires the above "NDP to end" quirk.
*/
{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
.driver_info = (unsigned long)&cdc_mbim_info_ndp_to_end,
},
/* Telit LE922A6 in MBIM composition */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1bc7, 0x1041, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
.driver_info = (unsigned long)&cdc_mbim_info_avoid_altsetting_toggle,
},
/* default entry */
{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
.driver_info = (unsigned long)&cdc_mbim_info_zlp,
},
{
},
};
MODULE_DEVICE_TABLE(usb, mbim_devs);
static struct usb_driver cdc_mbim_driver = {
.name = "cdc_mbim",
.id_table = mbim_devs,
.probe = usbnet_probe,
.disconnect = usbnet_disconnect,
.suspend = cdc_mbim_suspend,
.resume = cdc_mbim_resume,
.reset_resume = cdc_mbim_resume,
.supports_autosuspend = 1,
.disable_hub_initiated_lpm = 1,
};
module_usb_driver(cdc_mbim_driver);
MODULE_AUTHOR("Greg Suarez <gsuarez@smithmicro.com>");
MODULE_AUTHOR("Bjørn Mork <bjorn@mork.no>");
MODULE_DESCRIPTION("USB CDC MBIM host driver");
MODULE_LICENSE("GPL");