linux_dsm_epyc7002/arch/arm64/include/asm/assembler.h

516 lines
11 KiB
C
Raw Normal View History

/*
* Based on arch/arm/include/asm/assembler.h, arch/arm/mm/proc-macros.S
*
* Copyright (C) 1996-2000 Russell King
* Copyright (C) 2012 ARM Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __ASSEMBLY__
#error "Only include this from assembly code"
#endif
#ifndef __ASM_ASSEMBLER_H
#define __ASM_ASSEMBLER_H
#include <asm/asm-offsets.h>
#include <asm/cpufeature.h>
#include <asm/debug-monitors.h>
arm64: Work around Falkor erratum 1003 The Qualcomm Datacenter Technologies Falkor v1 CPU may allocate TLB entries using an incorrect ASID when TTBRx_EL1 is being updated. When the erratum is triggered, page table entries using the new translation table base address (BADDR) will be allocated into the TLB using the old ASID. All circumstances leading to the incorrect ASID being cached in the TLB arise when software writes TTBRx_EL1[ASID] and TTBRx_EL1[BADDR], a memory operation is in the process of performing a translation using the specific TTBRx_EL1 being written, and the memory operation uses a translation table descriptor designated as non-global. EL2 and EL3 code changing the EL1&0 ASID is not subject to this erratum because hardware is prohibited from performing translations from an out-of-context translation regime. Consider the following pseudo code. write new BADDR and ASID values to TTBRx_EL1 Replacing the above sequence with the one below will ensure that no TLB entries with an incorrect ASID are used by software. write reserved value to TTBRx_EL1[ASID] ISB write new value to TTBRx_EL1[BADDR] ISB write new value to TTBRx_EL1[ASID] ISB When the above sequence is used, page table entries using the new BADDR value may still be incorrectly allocated into the TLB using the reserved ASID. Yet this will not reduce functionality, since TLB entries incorrectly tagged with the reserved ASID will never be hit by a later instruction. Based on work by Shanker Donthineni <shankerd@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-02-09 03:08:37 +07:00
#include <asm/mmu_context.h>
#include <asm/page.h>
#include <asm/pgtable-hwdef.h>
#include <asm/ptrace.h>
arm64: debug: avoid accessing mdscr_el1 on fault paths where possible Since mdscr_el1 is part of the debug register group, it is highly likely to be trapped by a hypervisor to prevent virtual machines from debugging (buggering?) each other. Unfortunately, this absolutely destroys our performance, since we access the register on many of our low-level fault handling paths to keep track of the various debug state machines. This patch removes our dependency on mdscr_el1 in the case that debugging is not being used. More specifically we: - Use TIF_SINGLESTEP to indicate that a task is stepping at EL0 and avoid disabling step in the MDSCR when we don't need to. MDSCR_EL1.SS handling is moved to kernel_entry, when trapping from userspace. - Ensure debug exceptions are re-enabled on *all* exception entry paths, even the debug exception handling path (where we re-enable exceptions after invoking the handler). Since we can now rely on MDSCR_EL1.SS being cleared by the entry code, exception handlers can usually enable debug immediately before enabling interrupts. - Remove all debug exception unmasking from ret_to_user and el1_preempt, since we will never get here with debug exceptions masked. This results in a slight change to kernel debug behaviour, where we now step into interrupt handlers and data aborts from EL1 when debugging the kernel, which is actually a useful thing to do. A side-effect of this is that it *does* potentially prevent stepping off {break,watch}points when there is a high-frequency interrupt source (e.g. a timer), so a debugger would need to use either breakpoints or manually disable interrupts to get around this issue. With this patch applied, guest performance is restored under KVM when debug register accesses are trapped (and we get a measurable performance increase on the host on Cortex-A57 too). Cc: Ian Campbell <ian.campbell@citrix.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-04-30 01:04:06 +07:00
#include <asm/thread_info.h>
.macro save_and_disable_daif, flags
mrs \flags, daif
msr daifset, #0xf
.endm
.macro disable_daif
msr daifset, #0xf
.endm
.macro enable_daif
msr daifclr, #0xf
.endm
.macro restore_daif, flags:req
msr daif, \flags
.endm
/* Only on aarch64 pstate, PSR_D_BIT is different for aarch32 */
.macro inherit_daif, pstate:req, tmp:req
and \tmp, \pstate, #(PSR_D_BIT | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT)
msr daif, \tmp
.endm
/* IRQ is the lowest priority flag, unconditionally unmask the rest. */
.macro enable_da_f
msr daifclr, #(8 | 4 | 1)
.endm
/*
* Enable and disable interrupts.
*/
.macro disable_irq
msr daifset, #2
.endm
.macro enable_irq
msr daifclr, #2
.endm
.macro save_and_disable_irq, flags
mrs \flags, daif
msr daifset, #2
.endm
.macro restore_irq, flags
msr daif, \flags
.endm
.macro enable_dbg
msr daifclr, #8
.endm
arm64: debug: avoid accessing mdscr_el1 on fault paths where possible Since mdscr_el1 is part of the debug register group, it is highly likely to be trapped by a hypervisor to prevent virtual machines from debugging (buggering?) each other. Unfortunately, this absolutely destroys our performance, since we access the register on many of our low-level fault handling paths to keep track of the various debug state machines. This patch removes our dependency on mdscr_el1 in the case that debugging is not being used. More specifically we: - Use TIF_SINGLESTEP to indicate that a task is stepping at EL0 and avoid disabling step in the MDSCR when we don't need to. MDSCR_EL1.SS handling is moved to kernel_entry, when trapping from userspace. - Ensure debug exceptions are re-enabled on *all* exception entry paths, even the debug exception handling path (where we re-enable exceptions after invoking the handler). Since we can now rely on MDSCR_EL1.SS being cleared by the entry code, exception handlers can usually enable debug immediately before enabling interrupts. - Remove all debug exception unmasking from ret_to_user and el1_preempt, since we will never get here with debug exceptions masked. This results in a slight change to kernel debug behaviour, where we now step into interrupt handlers and data aborts from EL1 when debugging the kernel, which is actually a useful thing to do. A side-effect of this is that it *does* potentially prevent stepping off {break,watch}points when there is a high-frequency interrupt source (e.g. a timer), so a debugger would need to use either breakpoints or manually disable interrupts to get around this issue. With this patch applied, guest performance is restored under KVM when debug register accesses are trapped (and we get a measurable performance increase on the host on Cortex-A57 too). Cc: Ian Campbell <ian.campbell@citrix.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-04-30 01:04:06 +07:00
.macro disable_step_tsk, flgs, tmp
tbz \flgs, #TIF_SINGLESTEP, 9990f
mrs \tmp, mdscr_el1
bic \tmp, \tmp, #DBG_MDSCR_SS
msr mdscr_el1, \tmp
arm64: debug: avoid accessing mdscr_el1 on fault paths where possible Since mdscr_el1 is part of the debug register group, it is highly likely to be trapped by a hypervisor to prevent virtual machines from debugging (buggering?) each other. Unfortunately, this absolutely destroys our performance, since we access the register on many of our low-level fault handling paths to keep track of the various debug state machines. This patch removes our dependency on mdscr_el1 in the case that debugging is not being used. More specifically we: - Use TIF_SINGLESTEP to indicate that a task is stepping at EL0 and avoid disabling step in the MDSCR when we don't need to. MDSCR_EL1.SS handling is moved to kernel_entry, when trapping from userspace. - Ensure debug exceptions are re-enabled on *all* exception entry paths, even the debug exception handling path (where we re-enable exceptions after invoking the handler). Since we can now rely on MDSCR_EL1.SS being cleared by the entry code, exception handlers can usually enable debug immediately before enabling interrupts. - Remove all debug exception unmasking from ret_to_user and el1_preempt, since we will never get here with debug exceptions masked. This results in a slight change to kernel debug behaviour, where we now step into interrupt handlers and data aborts from EL1 when debugging the kernel, which is actually a useful thing to do. A side-effect of this is that it *does* potentially prevent stepping off {break,watch}points when there is a high-frequency interrupt source (e.g. a timer), so a debugger would need to use either breakpoints or manually disable interrupts to get around this issue. With this patch applied, guest performance is restored under KVM when debug register accesses are trapped (and we get a measurable performance increase on the host on Cortex-A57 too). Cc: Ian Campbell <ian.campbell@citrix.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-04-30 01:04:06 +07:00
isb // Synchronise with enable_dbg
9990:
.endm
/* call with daif masked */
arm64: debug: avoid accessing mdscr_el1 on fault paths where possible Since mdscr_el1 is part of the debug register group, it is highly likely to be trapped by a hypervisor to prevent virtual machines from debugging (buggering?) each other. Unfortunately, this absolutely destroys our performance, since we access the register on many of our low-level fault handling paths to keep track of the various debug state machines. This patch removes our dependency on mdscr_el1 in the case that debugging is not being used. More specifically we: - Use TIF_SINGLESTEP to indicate that a task is stepping at EL0 and avoid disabling step in the MDSCR when we don't need to. MDSCR_EL1.SS handling is moved to kernel_entry, when trapping from userspace. - Ensure debug exceptions are re-enabled on *all* exception entry paths, even the debug exception handling path (where we re-enable exceptions after invoking the handler). Since we can now rely on MDSCR_EL1.SS being cleared by the entry code, exception handlers can usually enable debug immediately before enabling interrupts. - Remove all debug exception unmasking from ret_to_user and el1_preempt, since we will never get here with debug exceptions masked. This results in a slight change to kernel debug behaviour, where we now step into interrupt handlers and data aborts from EL1 when debugging the kernel, which is actually a useful thing to do. A side-effect of this is that it *does* potentially prevent stepping off {break,watch}points when there is a high-frequency interrupt source (e.g. a timer), so a debugger would need to use either breakpoints or manually disable interrupts to get around this issue. With this patch applied, guest performance is restored under KVM when debug register accesses are trapped (and we get a measurable performance increase on the host on Cortex-A57 too). Cc: Ian Campbell <ian.campbell@citrix.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-04-30 01:04:06 +07:00
.macro enable_step_tsk, flgs, tmp
tbz \flgs, #TIF_SINGLESTEP, 9990f
mrs \tmp, mdscr_el1
orr \tmp, \tmp, #DBG_MDSCR_SS
msr mdscr_el1, \tmp
arm64: debug: avoid accessing mdscr_el1 on fault paths where possible Since mdscr_el1 is part of the debug register group, it is highly likely to be trapped by a hypervisor to prevent virtual machines from debugging (buggering?) each other. Unfortunately, this absolutely destroys our performance, since we access the register on many of our low-level fault handling paths to keep track of the various debug state machines. This patch removes our dependency on mdscr_el1 in the case that debugging is not being used. More specifically we: - Use TIF_SINGLESTEP to indicate that a task is stepping at EL0 and avoid disabling step in the MDSCR when we don't need to. MDSCR_EL1.SS handling is moved to kernel_entry, when trapping from userspace. - Ensure debug exceptions are re-enabled on *all* exception entry paths, even the debug exception handling path (where we re-enable exceptions after invoking the handler). Since we can now rely on MDSCR_EL1.SS being cleared by the entry code, exception handlers can usually enable debug immediately before enabling interrupts. - Remove all debug exception unmasking from ret_to_user and el1_preempt, since we will never get here with debug exceptions masked. This results in a slight change to kernel debug behaviour, where we now step into interrupt handlers and data aborts from EL1 when debugging the kernel, which is actually a useful thing to do. A side-effect of this is that it *does* potentially prevent stepping off {break,watch}points when there is a high-frequency interrupt source (e.g. a timer), so a debugger would need to use either breakpoints or manually disable interrupts to get around this issue. With this patch applied, guest performance is restored under KVM when debug register accesses are trapped (and we get a measurable performance increase on the host on Cortex-A57 too). Cc: Ian Campbell <ian.campbell@citrix.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-04-30 01:04:06 +07:00
9990:
.endm
/*
* SMP data memory barrier
*/
.macro smp_dmb, opt
dmb \opt
.endm
/*
* NOP sequence
*/
.macro nops, num
.rept \num
nop
.endr
.endm
/*
* Emit an entry into the exception table
*/
.macro _asm_extable, from, to
.pushsection __ex_table, "a"
.align 3
.long (\from - .), (\to - .)
.popsection
.endm
#define USER(l, x...) \
9999: x; \
_asm_extable 9999b, l
/*
* Register aliases.
*/
lr .req x30 // link register
/*
* Vector entry
*/
.macro ventry label
.align 7
b \label
.endm
/*
* Select code when configured for BE.
*/
#ifdef CONFIG_CPU_BIG_ENDIAN
#define CPU_BE(code...) code
#else
#define CPU_BE(code...)
#endif
/*
* Select code when configured for LE.
*/
#ifdef CONFIG_CPU_BIG_ENDIAN
#define CPU_LE(code...)
#else
#define CPU_LE(code...) code
#endif
/*
* Define a macro that constructs a 64-bit value by concatenating two
* 32-bit registers. Note that on big endian systems the order of the
* registers is swapped.
*/
#ifndef CONFIG_CPU_BIG_ENDIAN
.macro regs_to_64, rd, lbits, hbits
#else
.macro regs_to_64, rd, hbits, lbits
#endif
orr \rd, \lbits, \hbits, lsl #32
.endm
/*
* Pseudo-ops for PC-relative adr/ldr/str <reg>, <symbol> where
* <symbol> is within the range +/- 4 GB of the PC when running
* in core kernel context. In module context, a movz/movk sequence
* is used, since modules may be loaded far away from the kernel
* when KASLR is in effect.
*/
/*
* @dst: destination register (64 bit wide)
* @sym: name of the symbol
*/
.macro adr_l, dst, sym
#ifndef MODULE
adrp \dst, \sym
add \dst, \dst, :lo12:\sym
#else
movz \dst, #:abs_g3:\sym
movk \dst, #:abs_g2_nc:\sym
movk \dst, #:abs_g1_nc:\sym
movk \dst, #:abs_g0_nc:\sym
#endif
.endm
/*
* @dst: destination register (32 or 64 bit wide)
* @sym: name of the symbol
* @tmp: optional 64-bit scratch register to be used if <dst> is a
* 32-bit wide register, in which case it cannot be used to hold
* the address
*/
.macro ldr_l, dst, sym, tmp=
#ifndef MODULE
.ifb \tmp
adrp \dst, \sym
ldr \dst, [\dst, :lo12:\sym]
.else
adrp \tmp, \sym
ldr \dst, [\tmp, :lo12:\sym]
.endif
#else
.ifb \tmp
adr_l \dst, \sym
ldr \dst, [\dst]
.else
adr_l \tmp, \sym
ldr \dst, [\tmp]
.endif
#endif
.endm
/*
* @src: source register (32 or 64 bit wide)
* @sym: name of the symbol
* @tmp: mandatory 64-bit scratch register to calculate the address
* while <src> needs to be preserved.
*/
.macro str_l, src, sym, tmp
#ifndef MODULE
adrp \tmp, \sym
str \src, [\tmp, :lo12:\sym]
#else
adr_l \tmp, \sym
str \src, [\tmp]
#endif
.endm
/*
* @dst: Result of per_cpu(sym, smp_processor_id()), can be SP for
* non-module code
* @sym: The name of the per-cpu variable
* @tmp: scratch register
*/
.macro adr_this_cpu, dst, sym, tmp
#ifndef MODULE
adrp \tmp, \sym
add \dst, \tmp, #:lo12:\sym
#else
adr_l \dst, \sym
#endif
mrs \tmp, tpidr_el1
add \dst, \dst, \tmp
.endm
/*
* @dst: Result of READ_ONCE(per_cpu(sym, smp_processor_id()))
* @sym: The name of the per-cpu variable
* @tmp: scratch register
*/
.macro ldr_this_cpu dst, sym, tmp
adr_l \dst, \sym
mrs \tmp, tpidr_el1
ldr \dst, [\dst, \tmp]
.endm
/*
* vma_vm_mm - get mm pointer from vma pointer (vma->vm_mm)
*/
.macro vma_vm_mm, rd, rn
ldr \rd, [\rn, #VMA_VM_MM]
.endm
/*
* mmid - get context id from mm pointer (mm->context.id)
*/
.macro mmid, rd, rn
ldr \rd, [\rn, #MM_CONTEXT_ID]
.endm
/*
* read_ctr - read CTR_EL0. If the system has mismatched
* cache line sizes, provide the system wide safe value
* from arm64_ftr_reg_ctrel0.sys_val
*/
.macro read_ctr, reg
alternative_if_not ARM64_MISMATCHED_CACHE_LINE_SIZE
mrs \reg, ctr_el0 // read CTR
nop
alternative_else
ldr_l \reg, arm64_ftr_reg_ctrel0 + ARM64_FTR_SYSVAL
alternative_endif
.endm
/*
* raw_dcache_line_size - get the minimum D-cache line size on this CPU
* from the CTR register.
*/
.macro raw_dcache_line_size, reg, tmp
mrs \tmp, ctr_el0 // read CTR
ubfm \tmp, \tmp, #16, #19 // cache line size encoding
mov \reg, #4 // bytes per word
lsl \reg, \reg, \tmp // actual cache line size
.endm
/*
* dcache_line_size - get the safe D-cache line size across all CPUs
*/
.macro dcache_line_size, reg, tmp
read_ctr \tmp
ubfm \tmp, \tmp, #16, #19 // cache line size encoding
mov \reg, #4 // bytes per word
lsl \reg, \reg, \tmp // actual cache line size
.endm
/*
* raw_icache_line_size - get the minimum I-cache line size on this CPU
* from the CTR register.
*/
.macro raw_icache_line_size, reg, tmp
mrs \tmp, ctr_el0 // read CTR
and \tmp, \tmp, #0xf // cache line size encoding
mov \reg, #4 // bytes per word
lsl \reg, \reg, \tmp // actual cache line size
.endm
/*
* icache_line_size - get the safe I-cache line size across all CPUs
*/
.macro icache_line_size, reg, tmp
read_ctr \tmp
and \tmp, \tmp, #0xf // cache line size encoding
mov \reg, #4 // bytes per word
lsl \reg, \reg, \tmp // actual cache line size
.endm
/*
* tcr_set_idmap_t0sz - update TCR.T0SZ so that we can load the ID map
*/
.macro tcr_set_idmap_t0sz, valreg, tmpreg
#ifndef CONFIG_ARM64_VA_BITS_48
ldr_l \tmpreg, idmap_t0sz
bfi \valreg, \tmpreg, #TCR_T0SZ_OFFSET, #TCR_TxSZ_WIDTH
#endif
.endm
/*
* Macro to perform a data cache maintenance for the interval
* [kaddr, kaddr + size)
*
* op: operation passed to dc instruction
* domain: domain used in dsb instruciton
* kaddr: starting virtual address of the region
* size: size of the region
* Corrupts: kaddr, size, tmp1, tmp2
*/
.macro dcache_by_line_op op, domain, kaddr, size, tmp1, tmp2
dcache_line_size \tmp1, \tmp2
add \size, \kaddr, \size
sub \tmp2, \tmp1, #1
bic \kaddr, \kaddr, \tmp2
9998:
.if (\op == cvau || \op == cvac)
alternative_if_not ARM64_WORKAROUND_CLEAN_CACHE
dc \op, \kaddr
alternative_else
dc civac, \kaddr
alternative_endif
.elseif (\op == cvap)
alternative_if ARM64_HAS_DCPOP
sys 3, c7, c12, 1, \kaddr // dc cvap
alternative_else
dc cvac, \kaddr
alternative_endif
.else
dc \op, \kaddr
.endif
add \kaddr, \kaddr, \tmp1
cmp \kaddr, \size
b.lo 9998b
dsb \domain
.endm
/*
* reset_pmuserenr_el0 - reset PMUSERENR_EL0 if PMUv3 present
*/
.macro reset_pmuserenr_el0, tmpreg
mrs \tmpreg, id_aa64dfr0_el1 // Check ID_AA64DFR0_EL1 PMUVer
sbfx \tmpreg, \tmpreg, #8, #4
cmp \tmpreg, #1 // Skip if no PMU present
b.lt 9000f
msr pmuserenr_el0, xzr // Disable PMU access from EL0
9000:
.endm
/*
* copy_page - copy src to dest using temp registers t1-t8
*/
.macro copy_page dest:req src:req t1:req t2:req t3:req t4:req t5:req t6:req t7:req t8:req
9998: ldp \t1, \t2, [\src]
ldp \t3, \t4, [\src, #16]
ldp \t5, \t6, [\src, #32]
ldp \t7, \t8, [\src, #48]
add \src, \src, #64
stnp \t1, \t2, [\dest]
stnp \t3, \t4, [\dest, #16]
stnp \t5, \t6, [\dest, #32]
stnp \t7, \t8, [\dest, #48]
add \dest, \dest, #64
tst \src, #(PAGE_SIZE - 1)
b.ne 9998b
.endm
/*
* Annotate a function as position independent, i.e., safe to be called before
* the kernel virtual mapping is activated.
*/
#define ENDPIPROC(x) \
.globl __pi_##x; \
.type __pi_##x, %function; \
.set __pi_##x, x; \
.size __pi_##x, . - x; \
ENDPROC(x)
/*
* Annotate a function as being unsuitable for kprobes.
*/
#ifdef CONFIG_KPROBES
#define NOKPROBE(x) \
.pushsection "_kprobe_blacklist", "aw"; \
.quad x; \
.popsection;
#else
#define NOKPROBE(x)
#endif
/*
* Emit a 64-bit absolute little endian symbol reference in a way that
* ensures that it will be resolved at build time, even when building a
* PIE binary. This requires cooperation from the linker script, which
* must emit the lo32/hi32 halves individually.
*/
.macro le64sym, sym
.long \sym\()_lo32
.long \sym\()_hi32
.endm
/*
* mov_q - move an immediate constant into a 64-bit register using
* between 2 and 4 movz/movk instructions (depending on the
* magnitude and sign of the operand)
*/
.macro mov_q, reg, val
.if (((\val) >> 31) == 0 || ((\val) >> 31) == 0x1ffffffff)
movz \reg, :abs_g1_s:\val
.else
.if (((\val) >> 47) == 0 || ((\val) >> 47) == 0x1ffff)
movz \reg, :abs_g2_s:\val
.else
movz \reg, :abs_g3:\val
movk \reg, :abs_g2_nc:\val
.endif
movk \reg, :abs_g1_nc:\val
.endif
movk \reg, :abs_g0_nc:\val
.endm
/*
* Return the current thread_info.
*/
.macro get_thread_info, rd
mrs \rd, sp_el0
.endm
arm64: Work around Falkor erratum 1003 The Qualcomm Datacenter Technologies Falkor v1 CPU may allocate TLB entries using an incorrect ASID when TTBRx_EL1 is being updated. When the erratum is triggered, page table entries using the new translation table base address (BADDR) will be allocated into the TLB using the old ASID. All circumstances leading to the incorrect ASID being cached in the TLB arise when software writes TTBRx_EL1[ASID] and TTBRx_EL1[BADDR], a memory operation is in the process of performing a translation using the specific TTBRx_EL1 being written, and the memory operation uses a translation table descriptor designated as non-global. EL2 and EL3 code changing the EL1&0 ASID is not subject to this erratum because hardware is prohibited from performing translations from an out-of-context translation regime. Consider the following pseudo code. write new BADDR and ASID values to TTBRx_EL1 Replacing the above sequence with the one below will ensure that no TLB entries with an incorrect ASID are used by software. write reserved value to TTBRx_EL1[ASID] ISB write new value to TTBRx_EL1[BADDR] ISB write new value to TTBRx_EL1[ASID] ISB When the above sequence is used, page table entries using the new BADDR value may still be incorrectly allocated into the TLB using the reserved ASID. Yet this will not reduce functionality, since TLB entries incorrectly tagged with the reserved ASID will never be hit by a later instruction. Based on work by Shanker Donthineni <shankerd@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-02-09 03:08:37 +07:00
/*
* Errata workaround prior to TTBR0_EL1 update
*
* val: TTBR value with new BADDR, preserved
* tmp0: temporary register, clobbered
* tmp1: other temporary register, clobbered
*/
.macro pre_ttbr0_update_workaround, val, tmp0, tmp1
#ifdef CONFIG_QCOM_FALKOR_ERRATUM_1003
alternative_if ARM64_WORKAROUND_QCOM_FALKOR_E1003
mrs \tmp0, ttbr0_el1
mov \tmp1, #FALKOR_RESERVED_ASID
bfi \tmp0, \tmp1, #48, #16 // reserved ASID + old BADDR
msr ttbr0_el1, \tmp0
isb
bfi \tmp0, \val, #0, #48 // reserved ASID + new BADDR
msr ttbr0_el1, \tmp0
isb
alternative_else_nop_endif
#endif
.endm
/*
* Errata workaround post TTBR0_EL1 update.
*/
.macro post_ttbr0_update_workaround
#ifdef CONFIG_CAVIUM_ERRATUM_27456
alternative_if ARM64_WORKAROUND_CAVIUM_27456
ic iallu
dsb nsh
isb
alternative_else_nop_endif
#endif
.endm
#endif /* __ASM_ASSEMBLER_H */