linux_dsm_epyc7002/arch/arm/mach-pxa/devices.c

1113 lines
23 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 21:07:57 +07:00
// SPDX-License-Identifier: GPL-2.0
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/clkdev.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/platform_data/i2c-pxa.h>
#include "udc.h"
ARM: pxa: move platform_data definitions Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the pxa include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Paul Parsons <lost.distance@yahoo.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Acked-By: Stefan Schmidt <stefan@openezx.org> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: Harald Welte <laforge@openezx.org> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Tomas Cech <sleep_walker@suse.cz> Cc: Sergey Lapin <slapin@ossfans.org> Cc: Jonathan Cameron <jic23@cam.ac.uk> Cc: Dan Williams <djbw@fb.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Liam Girdwood <lrg@ti.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: openezx-devel@lists.openezx.org
2012-08-24 20:16:48 +07:00
#include <linux/platform_data/usb-pxa3xx-ulpi.h>
#include <linux/platform_data/video-pxafb.h>
#include <linux/platform_data/mmc-pxamci.h>
#include <linux/platform_data/irda-pxaficp.h>
#include <mach/irqs.h>
ARM: pxa: move platform_data definitions Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the pxa include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Paul Parsons <lost.distance@yahoo.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Acked-By: Stefan Schmidt <stefan@openezx.org> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: Harald Welte <laforge@openezx.org> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Tomas Cech <sleep_walker@suse.cz> Cc: Sergey Lapin <slapin@ossfans.org> Cc: Jonathan Cameron <jic23@cam.ac.uk> Cc: Dan Williams <djbw@fb.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Liam Girdwood <lrg@ti.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: openezx-devel@lists.openezx.org
2012-08-24 20:16:48 +07:00
#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <linux/platform_data/keypad-pxa27x.h>
#include <linux/platform_data/media/camera-pxa.h>
#include <mach/audio.h>
#include <mach/hardware.h>
#include <linux/platform_data/mmp_dma.h>
ARM: pxa: move platform_data definitions Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the pxa include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Paul Parsons <lost.distance@yahoo.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Acked-By: Stefan Schmidt <stefan@openezx.org> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: Harald Welte <laforge@openezx.org> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Tomas Cech <sleep_walker@suse.cz> Cc: Sergey Lapin <slapin@ossfans.org> Cc: Jonathan Cameron <jic23@cam.ac.uk> Cc: Dan Williams <djbw@fb.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Liam Girdwood <lrg@ti.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: openezx-devel@lists.openezx.org
2012-08-24 20:16:48 +07:00
#include <linux/platform_data/mtd-nand-pxa3xx.h>
#include "devices.h"
#include "generic.h"
void __init pxa_register_device(struct platform_device *dev, void *data)
{
int ret;
dev->dev.platform_data = data;
ret = platform_device_register(dev);
if (ret)
dev_err(&dev->dev, "unable to register device: %d\n", ret);
}
static struct resource pxa_resource_pmu = {
.start = IRQ_PMU,
.end = IRQ_PMU,
.flags = IORESOURCE_IRQ,
};
struct platform_device pxa_device_pmu = {
.name = "xscale-pmu",
.id = -1,
.resource = &pxa_resource_pmu,
.num_resources = 1,
};
static struct resource pxamci_resources[] = {
[0] = {
.start = 0x41100000,
.end = 0x41100fff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_MMC,
.end = IRQ_MMC,
.flags = IORESOURCE_IRQ,
},
};
static u64 pxamci_dmamask = 0xffffffffUL;
struct platform_device pxa_device_mci = {
.name = "pxa2xx-mci",
.id = 0,
.dev = {
.dma_mask = &pxamci_dmamask,
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(pxamci_resources),
.resource = pxamci_resources,
};
void __init pxa_set_mci_info(struct pxamci_platform_data *info)
{
pxa_register_device(&pxa_device_mci, info);
}
static struct pxa2xx_udc_mach_info pxa_udc_info = {
.gpio_pullup = -1,
};
void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info)
{
memcpy(&pxa_udc_info, info, sizeof *info);
}
static struct resource pxa2xx_udc_resources[] = {
[0] = {
.start = 0x40600000,
.end = 0x4060ffff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_USB,
.end = IRQ_USB,
.flags = IORESOURCE_IRQ,
},
};
static u64 udc_dma_mask = ~(u32)0;
struct platform_device pxa25x_device_udc = {
.name = "pxa25x-udc",
.id = -1,
.resource = pxa2xx_udc_resources,
.num_resources = ARRAY_SIZE(pxa2xx_udc_resources),
.dev = {
.platform_data = &pxa_udc_info,
.dma_mask = &udc_dma_mask,
}
};
struct platform_device pxa27x_device_udc = {
.name = "pxa27x-udc",
.id = -1,
.resource = pxa2xx_udc_resources,
.num_resources = ARRAY_SIZE(pxa2xx_udc_resources),
.dev = {
.platform_data = &pxa_udc_info,
.dma_mask = &udc_dma_mask,
}
};
#ifdef CONFIG_PXA3xx
static struct resource pxa3xx_u2d_resources[] = {
[0] = {
.start = 0x54100000,
.end = 0x54100fff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_USB2,
.end = IRQ_USB2,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa3xx_device_u2d = {
.name = "pxa3xx-u2d",
.id = -1,
.resource = pxa3xx_u2d_resources,
.num_resources = ARRAY_SIZE(pxa3xx_u2d_resources),
};
void __init pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info)
{
pxa_register_device(&pxa3xx_device_u2d, info);
}
#endif /* CONFIG_PXA3xx */
static struct resource pxafb_resources[] = {
[0] = {
.start = 0x44000000,
.end = 0x4400ffff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_LCD,
.end = IRQ_LCD,
.flags = IORESOURCE_IRQ,
},
};
static u64 fb_dma_mask = ~(u64)0;
struct platform_device pxa_device_fb = {
.name = "pxa2xx-fb",
.id = -1,
.dev = {
.dma_mask = &fb_dma_mask,
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(pxafb_resources),
.resource = pxafb_resources,
};
void __init pxa_set_fb_info(struct device *parent, struct pxafb_mach_info *info)
{
pxa_device_fb.dev.parent = parent;
pxa_register_device(&pxa_device_fb, info);
}
static struct resource pxa_resource_ffuart[] = {
{
.start = 0x40100000,
.end = 0x40100023,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_FFUART,
.end = IRQ_FFUART,
.flags = IORESOURCE_IRQ,
}
};
struct platform_device pxa_device_ffuart = {
.name = "pxa2xx-uart",
.id = 0,
.resource = pxa_resource_ffuart,
.num_resources = ARRAY_SIZE(pxa_resource_ffuart),
};
void __init pxa_set_ffuart_info(void *info)
{
pxa_register_device(&pxa_device_ffuart, info);
}
static struct resource pxa_resource_btuart[] = {
{
.start = 0x40200000,
.end = 0x40200023,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_BTUART,
.end = IRQ_BTUART,
.flags = IORESOURCE_IRQ,
}
};
struct platform_device pxa_device_btuart = {
.name = "pxa2xx-uart",
.id = 1,
.resource = pxa_resource_btuart,
.num_resources = ARRAY_SIZE(pxa_resource_btuart),
};
void __init pxa_set_btuart_info(void *info)
{
pxa_register_device(&pxa_device_btuart, info);
}
static struct resource pxa_resource_stuart[] = {
{
.start = 0x40700000,
.end = 0x40700023,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_STUART,
.end = IRQ_STUART,
.flags = IORESOURCE_IRQ,
}
};
struct platform_device pxa_device_stuart = {
.name = "pxa2xx-uart",
.id = 2,
.resource = pxa_resource_stuart,
.num_resources = ARRAY_SIZE(pxa_resource_stuart),
};
void __init pxa_set_stuart_info(void *info)
{
pxa_register_device(&pxa_device_stuart, info);
}
static struct resource pxa_resource_hwuart[] = {
{
.start = 0x41600000,
.end = 0x4160002F,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_HWUART,
.end = IRQ_HWUART,
.flags = IORESOURCE_IRQ,
}
};
struct platform_device pxa_device_hwuart = {
.name = "pxa2xx-uart",
.id = 3,
.resource = pxa_resource_hwuart,
.num_resources = ARRAY_SIZE(pxa_resource_hwuart),
};
void __init pxa_set_hwuart_info(void *info)
{
if (cpu_is_pxa255())
pxa_register_device(&pxa_device_hwuart, info);
else
pr_info("UART: Ignoring attempt to register HWUART on non-PXA255 hardware");
}
static struct resource pxai2c_resources[] = {
{
.start = 0x40301680,
.end = 0x403016a3,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_I2C,
.end = IRQ_I2C,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa_device_i2c = {
.name = "pxa2xx-i2c",
.id = 0,
.resource = pxai2c_resources,
.num_resources = ARRAY_SIZE(pxai2c_resources),
};
void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
{
pxa_register_device(&pxa_device_i2c, info);
}
#ifdef CONFIG_PXA27x
static struct resource pxa27x_resources_i2c_power[] = {
{
.start = 0x40f00180,
.end = 0x40f001a3,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_PWRI2C,
.end = IRQ_PWRI2C,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa27x_device_i2c_power = {
.name = "pxa2xx-i2c",
.id = 1,
.resource = pxa27x_resources_i2c_power,
.num_resources = ARRAY_SIZE(pxa27x_resources_i2c_power),
};
#endif
static struct resource pxai2s_resources[] = {
{
.start = 0x40400000,
.end = 0x40400083,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_I2S,
.end = IRQ_I2S,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa_device_i2s = {
.name = "pxa2xx-i2s",
.id = -1,
.resource = pxai2s_resources,
.num_resources = ARRAY_SIZE(pxai2s_resources),
};
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 03:15:21 +07:00
struct platform_device pxa_device_asoc_ssp1 = {
.name = "pxa-ssp-dai",
.id = 0,
};
struct platform_device pxa_device_asoc_ssp2= {
.name = "pxa-ssp-dai",
.id = 1,
};
struct platform_device pxa_device_asoc_ssp3 = {
.name = "pxa-ssp-dai",
.id = 2,
};
struct platform_device pxa_device_asoc_ssp4 = {
.name = "pxa-ssp-dai",
.id = 3,
};
struct platform_device pxa_device_asoc_platform = {
.name = "pxa-pcm-audio",
.id = -1,
};
static u64 pxaficp_dmamask = ~(u32)0;
static struct resource pxa_ir_resources[] = {
[0] = {
.start = IRQ_STUART,
.end = IRQ_STUART,
.flags = IORESOURCE_IRQ,
},
[1] = {
.start = IRQ_ICP,
.end = IRQ_ICP,
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = 0x40800000,
.end = 0x4080001b,
.flags = IORESOURCE_MEM,
},
[4] = {
.start = 0x40700000,
.end = 0x40700023,
.flags = IORESOURCE_MEM,
},
};
struct platform_device pxa_device_ficp = {
.name = "pxa2xx-ir",
.id = -1,
.num_resources = ARRAY_SIZE(pxa_ir_resources),
.resource = pxa_ir_resources,
.dev = {
.dma_mask = &pxaficp_dmamask,
.coherent_dma_mask = 0xffffffff,
},
};
void __init pxa_set_ficp_info(struct pxaficp_platform_data *info)
{
pxa_register_device(&pxa_device_ficp, info);
}
static struct resource pxa_rtc_resources[] = {
[0] = {
.start = 0x40900000,
.end = 0x40900000 + 0x3b,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_RTC1Hz,
.end = IRQ_RTC1Hz,
.name = "rtc 1Hz",
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = IRQ_RTCAlrm,
.end = IRQ_RTCAlrm,
.name = "rtc alarm",
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa_device_rtc = {
.name = "pxa-rtc",
.id = -1,
.num_resources = ARRAY_SIZE(pxa_rtc_resources),
.resource = pxa_rtc_resources,
};
struct platform_device sa1100_device_rtc = {
.name = "sa1100-rtc",
.id = -1,
.num_resources = ARRAY_SIZE(pxa_rtc_resources),
.resource = pxa_rtc_resources,
};
static struct resource pxa_ac97_resources[] = {
[0] = {
.start = 0x40500000,
.end = 0x40500000 + 0xfff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_AC97,
.end = IRQ_AC97,
.flags = IORESOURCE_IRQ,
},
};
static u64 pxa_ac97_dmamask = 0xffffffffUL;
struct platform_device pxa_device_ac97 = {
.name = "pxa2xx-ac97",
.id = -1,
.dev = {
.dma_mask = &pxa_ac97_dmamask,
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(pxa_ac97_resources),
.resource = pxa_ac97_resources,
};
void __init pxa_set_ac97_info(pxa2xx_audio_ops_t *ops)
{
int ret;
ret = clk_add_alias("ac97_clk", "pxa2xx-ac97:0", "AC97CLK",
&pxa_device_ac97.dev);
if (ret)
pr_err("PXA AC97 clock1 alias error: %d\n", ret);
ret = clk_add_alias("ac97_clk", "pxa2xx-ac97:1", "AC97CLK",
&pxa_device_ac97.dev);
if (ret)
pr_err("PXA AC97 clock2 alias error: %d\n", ret);
pxa_register_device(&pxa_device_ac97, ops);
}
#ifdef CONFIG_PXA25x
static struct resource pxa25x_resource_pwm0[] = {
[0] = {
.start = 0x40b00000,
.end = 0x40b0000f,
.flags = IORESOURCE_MEM,
},
};
struct platform_device pxa25x_device_pwm0 = {
.name = "pxa25x-pwm",
.id = 0,
.resource = pxa25x_resource_pwm0,
.num_resources = ARRAY_SIZE(pxa25x_resource_pwm0),
};
static struct resource pxa25x_resource_pwm1[] = {
[0] = {
.start = 0x40c00000,
.end = 0x40c0000f,
.flags = IORESOURCE_MEM,
},
};
struct platform_device pxa25x_device_pwm1 = {
.name = "pxa25x-pwm",
.id = 1,
.resource = pxa25x_resource_pwm1,
.num_resources = ARRAY_SIZE(pxa25x_resource_pwm1),
};
static u64 pxa25x_ssp_dma_mask = DMA_BIT_MASK(32);
static struct resource pxa25x_resource_ssp[] = {
[0] = {
.start = 0x41000000,
.end = 0x4100001f,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_SSP,
.end = IRQ_SSP,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa25x_device_ssp = {
.name = "pxa25x-ssp",
.id = 0,
.dev = {
.dma_mask = &pxa25x_ssp_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = pxa25x_resource_ssp,
.num_resources = ARRAY_SIZE(pxa25x_resource_ssp),
};
static u64 pxa25x_nssp_dma_mask = DMA_BIT_MASK(32);
static struct resource pxa25x_resource_nssp[] = {
[0] = {
.start = 0x41400000,
.end = 0x4140002f,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_NSSP,
.end = IRQ_NSSP,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa25x_device_nssp = {
.name = "pxa25x-nssp",
.id = 1,
.dev = {
.dma_mask = &pxa25x_nssp_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = pxa25x_resource_nssp,
.num_resources = ARRAY_SIZE(pxa25x_resource_nssp),
};
static u64 pxa25x_assp_dma_mask = DMA_BIT_MASK(32);
static struct resource pxa25x_resource_assp[] = {
[0] = {
.start = 0x41500000,
.end = 0x4150002f,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_ASSP,
.end = IRQ_ASSP,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa25x_device_assp = {
/* ASSP is basically equivalent to NSSP */
.name = "pxa25x-nssp",
.id = 2,
.dev = {
.dma_mask = &pxa25x_assp_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = pxa25x_resource_assp,
.num_resources = ARRAY_SIZE(pxa25x_resource_assp),
};
#endif /* CONFIG_PXA25x */
#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
static struct resource pxa27x_resource_camera[] = {
[0] = {
.start = 0x50000000,
.end = 0x50000fff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_CAMERA,
.end = IRQ_CAMERA,
.flags = IORESOURCE_IRQ,
},
};
static u64 pxa27x_dma_mask_camera = DMA_BIT_MASK(32);
static struct platform_device pxa27x_device_camera = {
.name = "pxa27x-camera",
.id = 0, /* This is used to put cameras on this interface */
.dev = {
.dma_mask = &pxa27x_dma_mask_camera,
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(pxa27x_resource_camera),
.resource = pxa27x_resource_camera,
};
void __init pxa_set_camera_info(struct pxacamera_platform_data *info)
{
pxa_register_device(&pxa27x_device_camera, info);
}
static u64 pxa27x_ohci_dma_mask = DMA_BIT_MASK(32);
static struct resource pxa27x_resource_ohci[] = {
[0] = {
.start = 0x4C000000,
.end = 0x4C00ff6f,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_USBH1,
.end = IRQ_USBH1,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa27x_device_ohci = {
.name = "pxa27x-ohci",
.id = -1,
.dev = {
.dma_mask = &pxa27x_ohci_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.num_resources = ARRAY_SIZE(pxa27x_resource_ohci),
.resource = pxa27x_resource_ohci,
};
void __init pxa_set_ohci_info(struct pxaohci_platform_data *info)
{
pxa_register_device(&pxa27x_device_ohci, info);
}
#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
static struct resource pxa27x_resource_keypad[] = {
[0] = {
.start = 0x41500000,
.end = 0x4150004c,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_KEYPAD,
.end = IRQ_KEYPAD,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa27x_device_keypad = {
.name = "pxa27x-keypad",
.id = -1,
.resource = pxa27x_resource_keypad,
.num_resources = ARRAY_SIZE(pxa27x_resource_keypad),
};
void __init pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info)
{
pxa_register_device(&pxa27x_device_keypad, info);
}
static u64 pxa27x_ssp1_dma_mask = DMA_BIT_MASK(32);
static struct resource pxa27x_resource_ssp1[] = {
[0] = {
.start = 0x41000000,
.end = 0x4100003f,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_SSP,
.end = IRQ_SSP,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa27x_device_ssp1 = {
.name = "pxa27x-ssp",
.id = 0,
.dev = {
.dma_mask = &pxa27x_ssp1_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = pxa27x_resource_ssp1,
.num_resources = ARRAY_SIZE(pxa27x_resource_ssp1),
};
static u64 pxa27x_ssp2_dma_mask = DMA_BIT_MASK(32);
static struct resource pxa27x_resource_ssp2[] = {
[0] = {
.start = 0x41700000,
.end = 0x4170003f,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_SSP2,
.end = IRQ_SSP2,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa27x_device_ssp2 = {
.name = "pxa27x-ssp",
.id = 1,
.dev = {
.dma_mask = &pxa27x_ssp2_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = pxa27x_resource_ssp2,
.num_resources = ARRAY_SIZE(pxa27x_resource_ssp2),
};
static u64 pxa27x_ssp3_dma_mask = DMA_BIT_MASK(32);
static struct resource pxa27x_resource_ssp3[] = {
[0] = {
.start = 0x41900000,
.end = 0x4190003f,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_SSP3,
.end = IRQ_SSP3,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa27x_device_ssp3 = {
.name = "pxa27x-ssp",
.id = 2,
.dev = {
.dma_mask = &pxa27x_ssp3_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = pxa27x_resource_ssp3,
.num_resources = ARRAY_SIZE(pxa27x_resource_ssp3),
};
static struct resource pxa27x_resource_pwm0[] = {
[0] = {
.start = 0x40b00000,
.end = 0x40b0001f,
.flags = IORESOURCE_MEM,
},
};
struct platform_device pxa27x_device_pwm0 = {
.name = "pxa27x-pwm",
.id = 0,
.resource = pxa27x_resource_pwm0,
.num_resources = ARRAY_SIZE(pxa27x_resource_pwm0),
};
static struct resource pxa27x_resource_pwm1[] = {
[0] = {
.start = 0x40c00000,
.end = 0x40c0001f,
.flags = IORESOURCE_MEM,
},
};
struct platform_device pxa27x_device_pwm1 = {
.name = "pxa27x-pwm",
.id = 1,
.resource = pxa27x_resource_pwm1,
.num_resources = ARRAY_SIZE(pxa27x_resource_pwm1),
};
#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
#ifdef CONFIG_PXA3xx
static struct resource pxa3xx_resources_mci2[] = {
[0] = {
.start = 0x42000000,
.end = 0x42000fff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_MMC2,
.end = IRQ_MMC2,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa3xx_device_mci2 = {
.name = "pxa2xx-mci",
.id = 1,
.dev = {
.dma_mask = &pxamci_dmamask,
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(pxa3xx_resources_mci2),
.resource = pxa3xx_resources_mci2,
};
void __init pxa3xx_set_mci2_info(struct pxamci_platform_data *info)
{
pxa_register_device(&pxa3xx_device_mci2, info);
}
static struct resource pxa3xx_resources_mci3[] = {
[0] = {
.start = 0x42500000,
.end = 0x42500fff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_MMC3,
.end = IRQ_MMC3,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa3xx_device_mci3 = {
.name = "pxa2xx-mci",
.id = 2,
.dev = {
.dma_mask = &pxamci_dmamask,
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(pxa3xx_resources_mci3),
.resource = pxa3xx_resources_mci3,
};
void __init pxa3xx_set_mci3_info(struct pxamci_platform_data *info)
{
pxa_register_device(&pxa3xx_device_mci3, info);
}
static struct resource pxa3xx_resources_gcu[] = {
{
.start = 0x54000000,
.end = 0x54000fff,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_GCU,
.end = IRQ_GCU,
.flags = IORESOURCE_IRQ,
},
};
static u64 pxa3xx_gcu_dmamask = DMA_BIT_MASK(32);
struct platform_device pxa3xx_device_gcu = {
.name = "pxa3xx-gcu",
.id = -1,
.num_resources = ARRAY_SIZE(pxa3xx_resources_gcu),
.resource = pxa3xx_resources_gcu,
.dev = {
.dma_mask = &pxa3xx_gcu_dmamask,
.coherent_dma_mask = 0xffffffff,
},
};
#endif /* CONFIG_PXA3xx */
#if defined(CONFIG_PXA3xx)
static struct resource pxa3xx_resources_i2c_power[] = {
{
.start = 0x40f500c0,
.end = 0x40f500d3,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_PWRI2C,
.end = IRQ_PWRI2C,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa3xx_device_i2c_power = {
.name = "pxa3xx-pwri2c",
.id = 1,
.resource = pxa3xx_resources_i2c_power,
.num_resources = ARRAY_SIZE(pxa3xx_resources_i2c_power),
};
static struct resource pxa3xx_resources_nand[] = {
[0] = {
.start = 0x43100000,
.end = 0x43100053,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_NAND,
.end = IRQ_NAND,
.flags = IORESOURCE_IRQ,
},
};
static u64 pxa3xx_nand_dma_mask = DMA_BIT_MASK(32);
struct platform_device pxa3xx_device_nand = {
.name = "pxa3xx-nand",
.id = -1,
.dev = {
.dma_mask = &pxa3xx_nand_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.num_resources = ARRAY_SIZE(pxa3xx_resources_nand),
.resource = pxa3xx_resources_nand,
};
void __init pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info)
{
pxa_register_device(&pxa3xx_device_nand, info);
}
static u64 pxa3xx_ssp4_dma_mask = DMA_BIT_MASK(32);
static struct resource pxa3xx_resource_ssp4[] = {
[0] = {
.start = 0x41a00000,
.end = 0x41a0003f,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_SSP4,
.end = IRQ_SSP4,
.flags = IORESOURCE_IRQ,
},
};
/*
* PXA3xx SSP is basically equivalent to PXA27x.
* However, we need to register the device by the correct name in order to
* make the driver set the correct internal type, hence we provide specific
* platform_devices for each of them.
*/
struct platform_device pxa3xx_device_ssp1 = {
.name = "pxa3xx-ssp",
.id = 0,
.dev = {
.dma_mask = &pxa27x_ssp1_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = pxa27x_resource_ssp1,
.num_resources = ARRAY_SIZE(pxa27x_resource_ssp1),
};
struct platform_device pxa3xx_device_ssp2 = {
.name = "pxa3xx-ssp",
.id = 1,
.dev = {
.dma_mask = &pxa27x_ssp2_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = pxa27x_resource_ssp2,
.num_resources = ARRAY_SIZE(pxa27x_resource_ssp2),
};
struct platform_device pxa3xx_device_ssp3 = {
.name = "pxa3xx-ssp",
.id = 2,
.dev = {
.dma_mask = &pxa27x_ssp3_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = pxa27x_resource_ssp3,
.num_resources = ARRAY_SIZE(pxa27x_resource_ssp3),
};
struct platform_device pxa3xx_device_ssp4 = {
.name = "pxa3xx-ssp",
.id = 3,
.dev = {
.dma_mask = &pxa3xx_ssp4_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = pxa3xx_resource_ssp4,
.num_resources = ARRAY_SIZE(pxa3xx_resource_ssp4),
};
#endif /* CONFIG_PXA3xx */
struct resource pxa_resource_gpio[] = {
{
.start = 0x40e00000,
.end = 0x40e0ffff,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_GPIO0,
.end = IRQ_GPIO0,
.name = "gpio0",
.flags = IORESOURCE_IRQ,
}, {
.start = IRQ_GPIO1,
.end = IRQ_GPIO1,
.name = "gpio1",
.flags = IORESOURCE_IRQ,
}, {
.start = IRQ_GPIO_2_x,
.end = IRQ_GPIO_2_x,
.name = "gpio_mux",
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa25x_device_gpio = {
#ifdef CONFIG_CPU_PXA26x
.name = "pxa26x-gpio",
#else
.name = "pxa25x-gpio",
#endif
.id = -1,
.num_resources = ARRAY_SIZE(pxa_resource_gpio),
.resource = pxa_resource_gpio,
};
struct platform_device pxa27x_device_gpio = {
.name = "pxa27x-gpio",
.id = -1,
.num_resources = ARRAY_SIZE(pxa_resource_gpio),
.resource = pxa_resource_gpio,
};
struct platform_device pxa3xx_device_gpio = {
.name = "pxa3xx-gpio",
.id = -1,
.num_resources = ARRAY_SIZE(pxa_resource_gpio),
.resource = pxa_resource_gpio,
};
struct platform_device pxa93x_device_gpio = {
.name = "pxa93x-gpio",
.id = -1,
.num_resources = ARRAY_SIZE(pxa_resource_gpio),
.resource = pxa_resource_gpio,
};
/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
* See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
{
struct platform_device *pd;
pd = platform_device_alloc("pxa2xx-spi", id);
if (pd == NULL) {
printk(KERN_ERR "pxa2xx-spi: failed to allocate device id %d\n",
id);
return;
}
pd->dev.platform_data = info;
platform_device_add(pd);
}
static struct resource pxa_dma_resource[] = {
[0] = {
.start = 0x40000000,
.end = 0x4000ffff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_DMA,
.end = IRQ_DMA,
.flags = IORESOURCE_IRQ,
},
};
static u64 pxadma_dmamask = 0xffffffffUL;
static struct platform_device pxa2xx_pxa_dma = {
.name = "pxa-dma",
.id = 0,
.dev = {
.dma_mask = &pxadma_dmamask,
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(pxa_dma_resource),
.resource = pxa_dma_resource,
};
void __init pxa2xx_set_dmac_info(struct mmp_dma_platdata *dma_pdata)
{
pxa_register_device(&pxa2xx_pxa_dma, dma_pdata);
}