2018-06-11 21:49:35 +07:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
arm64: dts: r8a7795: Add support for R-Car H3 ES2.0
Update r8a7795.dtsi so it corresponds to R-Car H3 ES2.0 or later:
- The following devices no longer exist on ES2.0, and are thus removed:
fcpf2, fcpvd3, fcpvi2, fdp1-2, usb3-if1, vspd3, vspi2.
- The DU <-> VSPD topology is different on ES2.0, hence remove the
"compatible" and "vsps" properties from the DU node until the driver
can handle this.
Move support for the ES1.x revision of the R-Car H3 SoC into a
separate file. To avoid duplication, r8a7795-es1.dtsi includes
r8a7795.dtsi, and adds device nodes and properties where needed.
Note that while currently r8a7795-es1.dtsi only adds device nodes,
removal of devices nodes and properties can be implemented using the
/delete-node/ and /delete-property/ keywords, as shown below:
&soc {
/delete-node/ <name>@<addr>;
};
&<label> {
/delete-property/ <prop>;
};
Switch r8a7795-salvator-x.dts and r8a7795-h3ulcb.dts from r8a7795.dtsi
to r8a7795-es1.dtsi to preserve compatibility.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-05-15 19:44:11 +07:00
|
|
|
/*
|
2018-07-19 18:19:50 +07:00
|
|
|
* Device Tree Source for the R-Car H3 (R8A77950) ES1.x SoC
|
arm64: dts: r8a7795: Add support for R-Car H3 ES2.0
Update r8a7795.dtsi so it corresponds to R-Car H3 ES2.0 or later:
- The following devices no longer exist on ES2.0, and are thus removed:
fcpf2, fcpvd3, fcpvi2, fdp1-2, usb3-if1, vspd3, vspi2.
- The DU <-> VSPD topology is different on ES2.0, hence remove the
"compatible" and "vsps" properties from the DU node until the driver
can handle this.
Move support for the ES1.x revision of the R-Car H3 SoC into a
separate file. To avoid duplication, r8a7795-es1.dtsi includes
r8a7795.dtsi, and adds device nodes and properties where needed.
Note that while currently r8a7795-es1.dtsi only adds device nodes,
removal of devices nodes and properties can be implemented using the
/delete-node/ and /delete-property/ keywords, as shown below:
&soc {
/delete-node/ <name>@<addr>;
};
&<label> {
/delete-property/ <prop>;
};
Switch r8a7795-salvator-x.dts and r8a7795-h3ulcb.dts from r8a7795.dtsi
to r8a7795-es1.dtsi to preserve compatibility.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-05-15 19:44:11 +07:00
|
|
|
*
|
|
|
|
* Copyright (C) 2015 Renesas Electronics Corp.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include "r8a7795.dtsi"
|
|
|
|
|
|
|
|
&soc {
|
2017-08-17 18:29:14 +07:00
|
|
|
xhci1: usb@ee040000 {
|
arm64: dts: r8a7795: Add support for R-Car H3 ES2.0
Update r8a7795.dtsi so it corresponds to R-Car H3 ES2.0 or later:
- The following devices no longer exist on ES2.0, and are thus removed:
fcpf2, fcpvd3, fcpvi2, fdp1-2, usb3-if1, vspd3, vspi2.
- The DU <-> VSPD topology is different on ES2.0, hence remove the
"compatible" and "vsps" properties from the DU node until the driver
can handle this.
Move support for the ES1.x revision of the R-Car H3 SoC into a
separate file. To avoid duplication, r8a7795-es1.dtsi includes
r8a7795.dtsi, and adds device nodes and properties where needed.
Note that while currently r8a7795-es1.dtsi only adds device nodes,
removal of devices nodes and properties can be implemented using the
/delete-node/ and /delete-property/ keywords, as shown below:
&soc {
/delete-node/ <name>@<addr>;
};
&<label> {
/delete-property/ <prop>;
};
Switch r8a7795-salvator-x.dts and r8a7795-h3ulcb.dts from r8a7795.dtsi
to r8a7795-es1.dtsi to preserve compatibility.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-05-15 19:44:11 +07:00
|
|
|
compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci";
|
|
|
|
reg = <0 0xee040000 0 0xc00>;
|
|
|
|
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
clocks = <&cpg CPG_MOD 327>;
|
|
|
|
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
|
|
|
|
resets = <&cpg 327>;
|
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
2017-11-10 20:25:18 +07:00
|
|
|
/delete-node/ mmu@febe0000;
|
|
|
|
/delete-node/ mmu@fe980000;
|
2018-03-06 16:34:30 +07:00
|
|
|
/delete-node/ mmu@fd950000;
|
2017-11-10 20:25:18 +07:00
|
|
|
/delete-node/ mmu@fd960000;
|
|
|
|
/delete-node/ mmu@fd970000;
|
|
|
|
|
2017-11-10 20:25:19 +07:00
|
|
|
ipmmu_mp1: mmu@ec680000 {
|
|
|
|
compatible = "renesas,ipmmu-r8a7795";
|
|
|
|
reg = <0 0xec680000 0 0x1000>;
|
|
|
|
renesas,ipmmu-main = <&ipmmu_mm 5>;
|
2018-11-29 17:34:35 +07:00
|
|
|
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
|
2017-11-10 20:25:19 +07:00
|
|
|
#iommu-cells = <1>;
|
|
|
|
};
|
|
|
|
|
|
|
|
ipmmu_sy: mmu@e7730000 {
|
|
|
|
compatible = "renesas,ipmmu-r8a7795";
|
|
|
|
reg = <0 0xe7730000 0 0x1000>;
|
|
|
|
renesas,ipmmu-main = <&ipmmu_mm 8>;
|
2018-11-29 17:34:35 +07:00
|
|
|
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
|
2017-11-10 20:25:19 +07:00
|
|
|
#iommu-cells = <1>;
|
|
|
|
};
|
|
|
|
|
2017-07-26 18:29:37 +07:00
|
|
|
/delete-node/ usb-phy@ee0e0200;
|
2017-07-26 18:29:38 +07:00
|
|
|
/delete-node/ usb@ee0e0100;
|
|
|
|
/delete-node/ usb@ee0e0000;
|
2017-07-26 18:29:40 +07:00
|
|
|
/delete-node/ usb@e659c000;
|
2017-07-26 18:29:37 +07:00
|
|
|
|
2017-07-26 18:29:39 +07:00
|
|
|
/delete-node/ dma-controller@e6460000;
|
|
|
|
/delete-node/ dma-controller@e6470000;
|
|
|
|
|
arm64: dts: r8a7795: Add support for R-Car H3 ES2.0
Update r8a7795.dtsi so it corresponds to R-Car H3 ES2.0 or later:
- The following devices no longer exist on ES2.0, and are thus removed:
fcpf2, fcpvd3, fcpvi2, fdp1-2, usb3-if1, vspd3, vspi2.
- The DU <-> VSPD topology is different on ES2.0, hence remove the
"compatible" and "vsps" properties from the DU node until the driver
can handle this.
Move support for the ES1.x revision of the R-Car H3 SoC into a
separate file. To avoid duplication, r8a7795-es1.dtsi includes
r8a7795.dtsi, and adds device nodes and properties where needed.
Note that while currently r8a7795-es1.dtsi only adds device nodes,
removal of devices nodes and properties can be implemented using the
/delete-node/ and /delete-property/ keywords, as shown below:
&soc {
/delete-node/ <name>@<addr>;
};
&<label> {
/delete-property/ <prop>;
};
Switch r8a7795-salvator-x.dts and r8a7795-h3ulcb.dts from r8a7795.dtsi
to r8a7795-es1.dtsi to preserve compatibility.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-05-15 19:44:11 +07:00
|
|
|
fcpf2: fcp@fe952000 {
|
|
|
|
compatible = "renesas,fcpf";
|
|
|
|
reg = <0 0xfe952000 0 0x200>;
|
|
|
|
clocks = <&cpg CPG_MOD 613>;
|
|
|
|
power-domains = <&sysc R8A7795_PD_A3VP>;
|
|
|
|
resets = <&cpg 613>;
|
2017-11-10 20:25:25 +07:00
|
|
|
iommus = <&ipmmu_vp0 2>;
|
arm64: dts: r8a7795: Add support for R-Car H3 ES2.0
Update r8a7795.dtsi so it corresponds to R-Car H3 ES2.0 or later:
- The following devices no longer exist on ES2.0, and are thus removed:
fcpf2, fcpvd3, fcpvi2, fdp1-2, usb3-if1, vspd3, vspi2.
- The DU <-> VSPD topology is different on ES2.0, hence remove the
"compatible" and "vsps" properties from the DU node until the driver
can handle this.
Move support for the ES1.x revision of the R-Car H3 SoC into a
separate file. To avoid duplication, r8a7795-es1.dtsi includes
r8a7795.dtsi, and adds device nodes and properties where needed.
Note that while currently r8a7795-es1.dtsi only adds device nodes,
removal of devices nodes and properties can be implemented using the
/delete-node/ and /delete-property/ keywords, as shown below:
&soc {
/delete-node/ <name>@<addr>;
};
&<label> {
/delete-property/ <prop>;
};
Switch r8a7795-salvator-x.dts and r8a7795-h3ulcb.dts from r8a7795.dtsi
to r8a7795-es1.dtsi to preserve compatibility.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-05-15 19:44:11 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
vspi2: vsp@fe9c0000 {
|
|
|
|
compatible = "renesas,vsp2";
|
|
|
|
reg = <0 0xfe9c0000 0 0x8000>;
|
|
|
|
interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
clocks = <&cpg CPG_MOD 629>;
|
|
|
|
power-domains = <&sysc R8A7795_PD_A3VP>;
|
|
|
|
resets = <&cpg 629>;
|
|
|
|
|
|
|
|
renesas,fcp = <&fcpvi2>;
|
|
|
|
};
|
|
|
|
|
|
|
|
fcpvi2: fcp@fe9cf000 {
|
|
|
|
compatible = "renesas,fcpv";
|
|
|
|
reg = <0 0xfe9cf000 0 0x200>;
|
|
|
|
clocks = <&cpg CPG_MOD 609>;
|
|
|
|
power-domains = <&sysc R8A7795_PD_A3VP>;
|
|
|
|
resets = <&cpg 609>;
|
2017-11-10 20:25:28 +07:00
|
|
|
iommus = <&ipmmu_vp0 10>;
|
arm64: dts: r8a7795: Add support for R-Car H3 ES2.0
Update r8a7795.dtsi so it corresponds to R-Car H3 ES2.0 or later:
- The following devices no longer exist on ES2.0, and are thus removed:
fcpf2, fcpvd3, fcpvi2, fdp1-2, usb3-if1, vspd3, vspi2.
- The DU <-> VSPD topology is different on ES2.0, hence remove the
"compatible" and "vsps" properties from the DU node until the driver
can handle this.
Move support for the ES1.x revision of the R-Car H3 SoC into a
separate file. To avoid duplication, r8a7795-es1.dtsi includes
r8a7795.dtsi, and adds device nodes and properties where needed.
Note that while currently r8a7795-es1.dtsi only adds device nodes,
removal of devices nodes and properties can be implemented using the
/delete-node/ and /delete-property/ keywords, as shown below:
&soc {
/delete-node/ <name>@<addr>;
};
&<label> {
/delete-property/ <prop>;
};
Switch r8a7795-salvator-x.dts and r8a7795-h3ulcb.dts from r8a7795.dtsi
to r8a7795-es1.dtsi to preserve compatibility.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-05-15 19:44:11 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
vspd3: vsp@fea38000 {
|
|
|
|
compatible = "renesas,vsp2";
|
2018-06-08 19:21:15 +07:00
|
|
|
reg = <0 0xfea38000 0 0x5000>;
|
arm64: dts: r8a7795: Add support for R-Car H3 ES2.0
Update r8a7795.dtsi so it corresponds to R-Car H3 ES2.0 or later:
- The following devices no longer exist on ES2.0, and are thus removed:
fcpf2, fcpvd3, fcpvi2, fdp1-2, usb3-if1, vspd3, vspi2.
- The DU <-> VSPD topology is different on ES2.0, hence remove the
"compatible" and "vsps" properties from the DU node until the driver
can handle this.
Move support for the ES1.x revision of the R-Car H3 SoC into a
separate file. To avoid duplication, r8a7795-es1.dtsi includes
r8a7795.dtsi, and adds device nodes and properties where needed.
Note that while currently r8a7795-es1.dtsi only adds device nodes,
removal of devices nodes and properties can be implemented using the
/delete-node/ and /delete-property/ keywords, as shown below:
&soc {
/delete-node/ <name>@<addr>;
};
&<label> {
/delete-property/ <prop>;
};
Switch r8a7795-salvator-x.dts and r8a7795-h3ulcb.dts from r8a7795.dtsi
to r8a7795-es1.dtsi to preserve compatibility.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-05-15 19:44:11 +07:00
|
|
|
interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
clocks = <&cpg CPG_MOD 620>;
|
|
|
|
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
|
|
|
|
resets = <&cpg 620>;
|
|
|
|
|
|
|
|
renesas,fcp = <&fcpvd3>;
|
|
|
|
};
|
|
|
|
|
|
|
|
fcpvd3: fcp@fea3f000 {
|
|
|
|
compatible = "renesas,fcpv";
|
|
|
|
reg = <0 0xfea3f000 0 0x200>;
|
|
|
|
clocks = <&cpg CPG_MOD 600>;
|
|
|
|
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
|
|
|
|
resets = <&cpg 600>;
|
2017-11-10 20:25:23 +07:00
|
|
|
iommus = <&ipmmu_vi0 11>;
|
arm64: dts: r8a7795: Add support for R-Car H3 ES2.0
Update r8a7795.dtsi so it corresponds to R-Car H3 ES2.0 or later:
- The following devices no longer exist on ES2.0, and are thus removed:
fcpf2, fcpvd3, fcpvi2, fdp1-2, usb3-if1, vspd3, vspi2.
- The DU <-> VSPD topology is different on ES2.0, hence remove the
"compatible" and "vsps" properties from the DU node until the driver
can handle this.
Move support for the ES1.x revision of the R-Car H3 SoC into a
separate file. To avoid duplication, r8a7795-es1.dtsi includes
r8a7795.dtsi, and adds device nodes and properties where needed.
Note that while currently r8a7795-es1.dtsi only adds device nodes,
removal of devices nodes and properties can be implemented using the
/delete-node/ and /delete-property/ keywords, as shown below:
&soc {
/delete-node/ <name>@<addr>;
};
&<label> {
/delete-property/ <prop>;
};
Switch r8a7795-salvator-x.dts and r8a7795-h3ulcb.dts from r8a7795.dtsi
to r8a7795-es1.dtsi to preserve compatibility.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-05-15 19:44:11 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
fdp1@fe948000 {
|
|
|
|
compatible = "renesas,fdp1";
|
|
|
|
reg = <0 0xfe948000 0 0x2400>;
|
|
|
|
interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
clocks = <&cpg CPG_MOD 117>;
|
|
|
|
power-domains = <&sysc R8A7795_PD_A3VP>;
|
|
|
|
resets = <&cpg 117>;
|
|
|
|
renesas,fcp = <&fcpf2>;
|
|
|
|
};
|
2018-05-16 08:58:49 +07:00
|
|
|
|
|
|
|
csi21: csi2@fea90000 {
|
|
|
|
compatible = "renesas,r8a7795-csi2";
|
|
|
|
reg = <0 0xfea90000 0 0x10000>;
|
|
|
|
interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
clocks = <&cpg CPG_MOD 713>;
|
|
|
|
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
|
|
|
|
resets = <&cpg 713>;
|
|
|
|
status = "disabled";
|
|
|
|
|
|
|
|
ports {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
port@1 {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
reg = <1>;
|
|
|
|
|
|
|
|
csi21vin0: endpoint@0 {
|
|
|
|
reg = <0>;
|
|
|
|
remote-endpoint = <&vin0csi21>;
|
|
|
|
};
|
|
|
|
csi21vin1: endpoint@1 {
|
|
|
|
reg = <1>;
|
|
|
|
remote-endpoint = <&vin1csi21>;
|
|
|
|
};
|
|
|
|
csi21vin2: endpoint@2 {
|
|
|
|
reg = <2>;
|
|
|
|
remote-endpoint = <&vin2csi21>;
|
|
|
|
};
|
|
|
|
csi21vin3: endpoint@3 {
|
|
|
|
reg = <3>;
|
|
|
|
remote-endpoint = <&vin3csi21>;
|
|
|
|
};
|
|
|
|
csi21vin4: endpoint@4 {
|
|
|
|
reg = <4>;
|
|
|
|
remote-endpoint = <&vin4csi21>;
|
|
|
|
};
|
|
|
|
csi21vin5: endpoint@5 {
|
|
|
|
reg = <5>;
|
|
|
|
remote-endpoint = <&vin5csi21>;
|
|
|
|
};
|
|
|
|
csi21vin6: endpoint@6 {
|
|
|
|
reg = <6>;
|
|
|
|
remote-endpoint = <&vin6csi21>;
|
|
|
|
};
|
|
|
|
csi21vin7: endpoint@7 {
|
|
|
|
reg = <7>;
|
|
|
|
remote-endpoint = <&vin7csi21>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
arm64: dts: r8a7795: Add support for R-Car H3 ES2.0
Update r8a7795.dtsi so it corresponds to R-Car H3 ES2.0 or later:
- The following devices no longer exist on ES2.0, and are thus removed:
fcpf2, fcpvd3, fcpvi2, fdp1-2, usb3-if1, vspd3, vspi2.
- The DU <-> VSPD topology is different on ES2.0, hence remove the
"compatible" and "vsps" properties from the DU node until the driver
can handle this.
Move support for the ES1.x revision of the R-Car H3 SoC into a
separate file. To avoid duplication, r8a7795-es1.dtsi includes
r8a7795.dtsi, and adds device nodes and properties where needed.
Note that while currently r8a7795-es1.dtsi only adds device nodes,
removal of devices nodes and properties can be implemented using the
/delete-node/ and /delete-property/ keywords, as shown below:
&soc {
/delete-node/ <name>@<addr>;
};
&<label> {
/delete-property/ <prop>;
};
Switch r8a7795-salvator-x.dts and r8a7795-h3ulcb.dts from r8a7795.dtsi
to r8a7795-es1.dtsi to preserve compatibility.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-05-15 19:44:11 +07:00
|
|
|
};
|
|
|
|
|
2017-11-23 17:58:50 +07:00
|
|
|
&gpio1 {
|
|
|
|
gpio-ranges = <&pfc 0 32 28>;
|
|
|
|
};
|
|
|
|
|
2017-11-10 20:25:18 +07:00
|
|
|
&ipmmu_vi0 {
|
|
|
|
renesas,ipmmu-main = <&ipmmu_mm 11>;
|
|
|
|
};
|
|
|
|
|
|
|
|
&ipmmu_vp0 {
|
|
|
|
renesas,ipmmu-main = <&ipmmu_mm 12>;
|
|
|
|
};
|
|
|
|
|
|
|
|
&ipmmu_vc0 {
|
|
|
|
renesas,ipmmu-main = <&ipmmu_mm 9>;
|
|
|
|
};
|
|
|
|
|
|
|
|
&ipmmu_vc1 {
|
|
|
|
renesas,ipmmu-main = <&ipmmu_mm 10>;
|
|
|
|
};
|
|
|
|
|
|
|
|
&ipmmu_rt {
|
|
|
|
renesas,ipmmu-main = <&ipmmu_mm 7>;
|
|
|
|
};
|
|
|
|
|
2017-11-10 20:25:21 +07:00
|
|
|
&audma0 {
|
|
|
|
iommus = <&ipmmu_mp1 0>, <&ipmmu_mp1 1>,
|
|
|
|
<&ipmmu_mp1 2>, <&ipmmu_mp1 3>,
|
|
|
|
<&ipmmu_mp1 4>, <&ipmmu_mp1 5>,
|
|
|
|
<&ipmmu_mp1 6>, <&ipmmu_mp1 7>,
|
|
|
|
<&ipmmu_mp1 8>, <&ipmmu_mp1 9>,
|
|
|
|
<&ipmmu_mp1 10>, <&ipmmu_mp1 11>,
|
|
|
|
<&ipmmu_mp1 12>, <&ipmmu_mp1 13>,
|
|
|
|
<&ipmmu_mp1 14>, <&ipmmu_mp1 15>;
|
|
|
|
};
|
|
|
|
|
|
|
|
&audma1 {
|
|
|
|
iommus = <&ipmmu_mp1 16>, <&ipmmu_mp1 17>,
|
|
|
|
<&ipmmu_mp1 18>, <&ipmmu_mp1 19>,
|
|
|
|
<&ipmmu_mp1 20>, <&ipmmu_mp1 21>,
|
|
|
|
<&ipmmu_mp1 22>, <&ipmmu_mp1 23>,
|
|
|
|
<&ipmmu_mp1 24>, <&ipmmu_mp1 25>,
|
|
|
|
<&ipmmu_mp1 26>, <&ipmmu_mp1 27>,
|
|
|
|
<&ipmmu_mp1 28>, <&ipmmu_mp1 29>,
|
|
|
|
<&ipmmu_mp1 30>, <&ipmmu_mp1 31>;
|
|
|
|
};
|
|
|
|
|
2017-11-10 20:25:26 +07:00
|
|
|
&fcpvb1 {
|
|
|
|
iommus = <&ipmmu_vp0 7>;
|
|
|
|
};
|
|
|
|
|
2017-11-10 20:25:24 +07:00
|
|
|
&fcpf1 {
|
|
|
|
iommus = <&ipmmu_vp0 1>;
|
|
|
|
};
|
|
|
|
|
2017-11-10 20:25:27 +07:00
|
|
|
&fcpvi1 {
|
|
|
|
iommus = <&ipmmu_vp0 9>;
|
|
|
|
};
|
|
|
|
|
2017-11-10 20:25:22 +07:00
|
|
|
&fcpvd2 {
|
|
|
|
iommus = <&ipmmu_vi0 10>;
|
|
|
|
};
|
|
|
|
|
arm64: dts: r8a7795: Add support for R-Car H3 ES2.0
Update r8a7795.dtsi so it corresponds to R-Car H3 ES2.0 or later:
- The following devices no longer exist on ES2.0, and are thus removed:
fcpf2, fcpvd3, fcpvi2, fdp1-2, usb3-if1, vspd3, vspi2.
- The DU <-> VSPD topology is different on ES2.0, hence remove the
"compatible" and "vsps" properties from the DU node until the driver
can handle this.
Move support for the ES1.x revision of the R-Car H3 SoC into a
separate file. To avoid duplication, r8a7795-es1.dtsi includes
r8a7795.dtsi, and adds device nodes and properties where needed.
Note that while currently r8a7795-es1.dtsi only adds device nodes,
removal of devices nodes and properties can be implemented using the
/delete-node/ and /delete-property/ keywords, as shown below:
&soc {
/delete-node/ <name>@<addr>;
};
&<label> {
/delete-property/ <prop>;
};
Switch r8a7795-salvator-x.dts and r8a7795-h3ulcb.dts from r8a7795.dtsi
to r8a7795-es1.dtsi to preserve compatibility.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-05-15 19:44:11 +07:00
|
|
|
&du {
|
|
|
|
vsps = <&vspd0 &vspd1 &vspd2 &vspd3>;
|
|
|
|
};
|
2018-05-16 08:58:49 +07:00
|
|
|
|
|
|
|
&vin0 {
|
|
|
|
ports {
|
|
|
|
port@1 {
|
|
|
|
vin0csi21: endpoint@1 {
|
|
|
|
reg = <1>;
|
2018-08-28 21:10:59 +07:00
|
|
|
remote-endpoint = <&csi21vin0>;
|
2018-05-16 08:58:49 +07:00
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&vin1 {
|
|
|
|
ports {
|
|
|
|
port@1 {
|
|
|
|
vin1csi21: endpoint@1 {
|
|
|
|
reg = <1>;
|
2018-08-28 21:10:59 +07:00
|
|
|
remote-endpoint = <&csi21vin1>;
|
2018-05-16 08:58:49 +07:00
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&vin2 {
|
|
|
|
ports {
|
|
|
|
port@1 {
|
|
|
|
vin2csi21: endpoint@1 {
|
|
|
|
reg = <1>;
|
2018-08-28 21:10:59 +07:00
|
|
|
remote-endpoint = <&csi21vin2>;
|
2018-05-16 08:58:49 +07:00
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&vin3 {
|
|
|
|
ports {
|
|
|
|
port@1 {
|
|
|
|
vin3csi21: endpoint@1 {
|
|
|
|
reg = <1>;
|
2018-08-28 21:10:59 +07:00
|
|
|
remote-endpoint = <&csi21vin3>;
|
2018-05-16 08:58:49 +07:00
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&vin4 {
|
|
|
|
ports {
|
|
|
|
port@1 {
|
|
|
|
vin4csi21: endpoint@1 {
|
|
|
|
reg = <1>;
|
2018-08-28 21:10:59 +07:00
|
|
|
remote-endpoint = <&csi21vin4>;
|
2018-05-16 08:58:49 +07:00
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&vin5 {
|
|
|
|
ports {
|
|
|
|
port@1 {
|
|
|
|
vin5csi21: endpoint@1 {
|
|
|
|
reg = <1>;
|
2018-08-28 21:10:59 +07:00
|
|
|
remote-endpoint = <&csi21vin5>;
|
2018-05-16 08:58:49 +07:00
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&vin6 {
|
|
|
|
ports {
|
|
|
|
port@1 {
|
|
|
|
vin6csi21: endpoint@1 {
|
|
|
|
reg = <1>;
|
2018-08-28 21:10:59 +07:00
|
|
|
remote-endpoint = <&csi21vin6>;
|
2018-05-16 08:58:49 +07:00
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&vin7 {
|
|
|
|
ports {
|
|
|
|
port@1 {
|
|
|
|
vin7csi21: endpoint@1 {
|
|
|
|
reg = <1>;
|
2018-08-28 21:10:59 +07:00
|
|
|
remote-endpoint = <&csi21vin7>;
|
2018-05-16 08:58:49 +07:00
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|