linux_dsm_epyc7002/include/uapi/linux/if_link.h

783 lines
18 KiB
C
Raw Normal View History

#ifndef _UAPI_LINUX_IF_LINK_H
#define _UAPI_LINUX_IF_LINK_H
#include <linux/types.h>
#include <linux/netlink.h>
/* This struct should be in sync with struct rtnl_link_stats64 */
struct rtnl_link_stats {
__u32 rx_packets; /* total packets received */
__u32 tx_packets; /* total packets transmitted */
__u32 rx_bytes; /* total bytes received */
__u32 tx_bytes; /* total bytes transmitted */
__u32 rx_errors; /* bad packets received */
__u32 tx_errors; /* packet transmit problems */
__u32 rx_dropped; /* no space in linux buffers */
__u32 tx_dropped; /* no space available in linux */
__u32 multicast; /* multicast packets received */
__u32 collisions;
/* detailed rx_errors: */
__u32 rx_length_errors;
__u32 rx_over_errors; /* receiver ring buff overflow */
__u32 rx_crc_errors; /* recved pkt with crc error */
__u32 rx_frame_errors; /* recv'd frame alignment error */
__u32 rx_fifo_errors; /* recv'r fifo overrun */
__u32 rx_missed_errors; /* receiver missed packet */
/* detailed tx_errors */
__u32 tx_aborted_errors;
__u32 tx_carrier_errors;
__u32 tx_fifo_errors;
__u32 tx_heartbeat_errors;
__u32 tx_window_errors;
/* for cslip etc */
__u32 rx_compressed;
__u32 tx_compressed;
__u32 rx_nohandler; /* dropped, no handler found */
};
/* The main device statistics structure */
struct rtnl_link_stats64 {
__u64 rx_packets; /* total packets received */
__u64 tx_packets; /* total packets transmitted */
__u64 rx_bytes; /* total bytes received */
__u64 tx_bytes; /* total bytes transmitted */
__u64 rx_errors; /* bad packets received */
__u64 tx_errors; /* packet transmit problems */
__u64 rx_dropped; /* no space in linux buffers */
__u64 tx_dropped; /* no space available in linux */
__u64 multicast; /* multicast packets received */
__u64 collisions;
/* detailed rx_errors: */
__u64 rx_length_errors;
__u64 rx_over_errors; /* receiver ring buff overflow */
__u64 rx_crc_errors; /* recved pkt with crc error */
__u64 rx_frame_errors; /* recv'd frame alignment error */
__u64 rx_fifo_errors; /* recv'r fifo overrun */
__u64 rx_missed_errors; /* receiver missed packet */
/* detailed tx_errors */
__u64 tx_aborted_errors;
__u64 tx_carrier_errors;
__u64 tx_fifo_errors;
__u64 tx_heartbeat_errors;
__u64 tx_window_errors;
/* for cslip etc */
__u64 rx_compressed;
__u64 tx_compressed;
__u64 rx_nohandler; /* dropped, no handler found */
};
/* The struct should be in sync with struct ifmap */
struct rtnl_link_ifmap {
__u64 mem_start;
__u64 mem_end;
__u64 base_addr;
__u16 irq;
__u8 dma;
__u8 port;
};
/*
* IFLA_AF_SPEC
* Contains nested attributes for address family specific attributes.
* Each address family may create a attribute with the address family
* number as type and create its own attribute structure in it.
*
* Example:
* [IFLA_AF_SPEC] = {
* [AF_INET] = {
* [IFLA_INET_CONF] = ...,
* },
* [AF_INET6] = {
* [IFLA_INET6_FLAGS] = ...,
* [IFLA_INET6_CONF] = ...,
* }
* }
*/
enum {
IFLA_UNSPEC,
IFLA_ADDRESS,
IFLA_BROADCAST,
IFLA_IFNAME,
IFLA_MTU,
IFLA_LINK,
IFLA_QDISC,
IFLA_STATS,
IFLA_COST,
#define IFLA_COST IFLA_COST
IFLA_PRIORITY,
#define IFLA_PRIORITY IFLA_PRIORITY
IFLA_MASTER,
#define IFLA_MASTER IFLA_MASTER
IFLA_WIRELESS, /* Wireless Extension event - see wireless.h */
#define IFLA_WIRELESS IFLA_WIRELESS
IFLA_PROTINFO, /* Protocol specific information for a link */
#define IFLA_PROTINFO IFLA_PROTINFO
IFLA_TXQLEN,
#define IFLA_TXQLEN IFLA_TXQLEN
IFLA_MAP,
#define IFLA_MAP IFLA_MAP
IFLA_WEIGHT,
#define IFLA_WEIGHT IFLA_WEIGHT
IFLA_OPERSTATE,
IFLA_LINKMODE,
IFLA_LINKINFO,
#define IFLA_LINKINFO IFLA_LINKINFO
IFLA_NET_NS_PID,
IFLA_IFALIAS,
IFLA_NUM_VF, /* Number of VFs if device is SR-IOV PF */
IFLA_VFINFO_LIST,
IFLA_STATS64,
IFLA_VF_PORTS,
IFLA_PORT_SELF,
IFLA_AF_SPEC,
IFLA_GROUP, /* Group the device belongs to */
IFLA_NET_NS_FD,
IFLA_EXT_MASK, /* Extended info mask, VFs, etc */
IFLA_PROMISCUITY, /* Promiscuity count: > 0 means acts PROMISC */
#define IFLA_PROMISCUITY IFLA_PROMISCUITY
IFLA_NUM_TX_QUEUES,
IFLA_NUM_RX_QUEUES,
IFLA_CARRIER,
IFLA_PHYS_PORT_ID,
IFLA_CARRIER_CHANGES,
IFLA_PHYS_SWITCH_ID,
IFLA_LINK_NETNSID,
IFLA_PHYS_PORT_NAME,
IFLA_PROTO_DOWN,
IFLA_GSO_MAX_SEGS,
IFLA_GSO_MAX_SIZE,
__IFLA_MAX
};
#define IFLA_MAX (__IFLA_MAX - 1)
/* backwards compatibility for userspace */
#ifndef __KERNEL__
#define IFLA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifinfomsg))))
#define IFLA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifinfomsg))
#endif
enum {
IFLA_INET_UNSPEC,
IFLA_INET_CONF,
__IFLA_INET_MAX,
};
#define IFLA_INET_MAX (__IFLA_INET_MAX - 1)
/* ifi_flags.
IFF_* flags.
The only change is:
IFF_LOOPBACK, IFF_BROADCAST and IFF_POINTOPOINT are
more not changeable by user. They describe link media
characteristics and set by device driver.
Comments:
- Combination IFF_BROADCAST|IFF_POINTOPOINT is invalid
- If neither of these three flags are set;
the interface is NBMA.
- IFF_MULTICAST does not mean anything special:
multicasts can be used on all not-NBMA links.
IFF_MULTICAST means that this media uses special encapsulation
for multicast frames. Apparently, all IFF_POINTOPOINT and
IFF_BROADCAST devices are able to use multicasts too.
*/
/* IFLA_LINK.
For usual devices it is equal ifi_index.
If it is a "virtual interface" (f.e. tunnel), ifi_link
can point to real physical interface (f.e. for bandwidth calculations),
or maybe 0, what means, that real media is unknown (usual
for IPIP tunnels, when route to endpoint is allowed to change)
*/
/* Subtype attributes for IFLA_PROTINFO */
enum {
IFLA_INET6_UNSPEC,
IFLA_INET6_FLAGS, /* link flags */
IFLA_INET6_CONF, /* sysctl parameters */
IFLA_INET6_STATS, /* statistics */
IFLA_INET6_MCAST, /* MC things. What of them? */
IFLA_INET6_CACHEINFO, /* time values and max reasm size */
IFLA_INET6_ICMP6STATS, /* statistics (icmpv6) */
net: ipv6: add tokenized interface identifier support This patch adds support for IPv6 tokenized IIDs, that allow for administrators to assign well-known host-part addresses to nodes whilst still obtaining global network prefix from Router Advertisements. It is currently in draft status. The primary target for such support is server platforms where addresses are usually manually configured, rather than using DHCPv6 or SLAAC. By using tokenised identifiers, hosts can still determine their network prefix by use of SLAAC, but more readily be automatically renumbered should their network prefix change. [...] The disadvantage with static addresses is that they are likely to require manual editing should the network prefix in use change. If instead there were a method to only manually configure the static identifier part of the IPv6 address, then the address could be automatically updated when a new prefix was introduced, as described in [RFC4192] for example. In such cases a DNS server might be configured with such a tokenised interface identifier of ::53, and SLAAC would use the token in constructing the interface address, using the advertised prefix. [...] http://tools.ietf.org/html/draft-chown-6man-tokenised-ipv6-identifiers-02 The implementation is partially based on top of Mark K. Thompson's proof of concept. However, it uses the Netlink interface for configuration resp. data retrival, so that it can be easily extended in future. Successfully tested by myself. Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08 11:01:30 +07:00
IFLA_INET6_TOKEN, /* device token */
IFLA_INET6_ADDR_GEN_MODE, /* implicit address generator mode */
__IFLA_INET6_MAX
};
#define IFLA_INET6_MAX (__IFLA_INET6_MAX - 1)
enum in6_addr_gen_mode {
IN6_ADDR_GEN_MODE_EUI64,
IN6_ADDR_GEN_MODE_NONE,
ipv6: generation of stable privacy addresses for link-local and autoconf This patch implements the stable privacy address generation for link-local and autoconf addresses as specified in RFC7217. RID = F(Prefix, Net_Iface, Network_ID, DAD_Counter, secret_key) is the RID (random identifier). As the hash function F we chose one round of sha1. Prefix will be either the link-local prefix or the router advertised one. As Net_Iface we use the MAC address of the device. DAD_Counter and secret_key are implemented as specified. We don't use Network_ID, as it couples the code too closely to other subsystems. It is specified as optional in the RFC. As Net_Iface we only use the MAC address: we simply have no stable identifier in the kernel we could possibly use: because this code might run very early, we cannot depend on names, as they might be changed by user space early on during the boot process. A new address generation mode is introduced, IN6_ADDR_GEN_MODE_STABLE_PRIVACY. With iproute2 one can switch back to none or eui64 address configuration mode although the stable_secret is already set. We refuse writes to ipv6/conf/all/stable_secret but only allow ipv6/conf/default/stable_secret and the interface specific file to be written to. The default stable_secret is used as the parameter for the namespace, the interface specific can overwrite the secret, e.g. when switching a network configuration from one system to another while inheriting the secret. Cc: Erik Kline <ek@google.com> Cc: Fernando Gont <fgont@si6networks.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: YOSHIFUJI Hideaki/吉藤英明 <hideaki.yoshifuji@miraclelinux.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-24 05:36:01 +07:00
IN6_ADDR_GEN_MODE_STABLE_PRIVACY,
IN6_ADDR_GEN_MODE_RANDOM,
};
/* Bridge section */
enum {
IFLA_BR_UNSPEC,
IFLA_BR_FORWARD_DELAY,
IFLA_BR_HELLO_TIME,
IFLA_BR_MAX_AGE,
IFLA_BR_AGEING_TIME,
IFLA_BR_STP_STATE,
IFLA_BR_PRIORITY,
IFLA_BR_VLAN_FILTERING,
IFLA_BR_VLAN_PROTOCOL,
IFLA_BR_GROUP_FWD_MASK,
IFLA_BR_ROOT_ID,
IFLA_BR_BRIDGE_ID,
IFLA_BR_ROOT_PORT,
IFLA_BR_ROOT_PATH_COST,
IFLA_BR_TOPOLOGY_CHANGE,
IFLA_BR_TOPOLOGY_CHANGE_DETECTED,
IFLA_BR_HELLO_TIMER,
IFLA_BR_TCN_TIMER,
IFLA_BR_TOPOLOGY_CHANGE_TIMER,
IFLA_BR_GC_TIMER,
IFLA_BR_GROUP_ADDR,
IFLA_BR_FDB_FLUSH,
IFLA_BR_MCAST_ROUTER,
IFLA_BR_MCAST_SNOOPING,
IFLA_BR_MCAST_QUERY_USE_IFADDR,
IFLA_BR_MCAST_QUERIER,
IFLA_BR_MCAST_HASH_ELASTICITY,
IFLA_BR_MCAST_HASH_MAX,
IFLA_BR_MCAST_LAST_MEMBER_CNT,
IFLA_BR_MCAST_STARTUP_QUERY_CNT,
IFLA_BR_MCAST_LAST_MEMBER_INTVL,
IFLA_BR_MCAST_MEMBERSHIP_INTVL,
IFLA_BR_MCAST_QUERIER_INTVL,
IFLA_BR_MCAST_QUERY_INTVL,
IFLA_BR_MCAST_QUERY_RESPONSE_INTVL,
IFLA_BR_MCAST_STARTUP_QUERY_INTVL,
IFLA_BR_NF_CALL_IPTABLES,
IFLA_BR_NF_CALL_IP6TABLES,
IFLA_BR_NF_CALL_ARPTABLES,
IFLA_BR_VLAN_DEFAULT_PVID,
__IFLA_BR_MAX,
};
#define IFLA_BR_MAX (__IFLA_BR_MAX - 1)
struct ifla_bridge_id {
__u8 prio[2];
__u8 addr[6]; /* ETH_ALEN */
};
enum {
BRIDGE_MODE_UNSPEC,
BRIDGE_MODE_HAIRPIN,
};
enum {
IFLA_BRPORT_UNSPEC,
IFLA_BRPORT_STATE, /* Spanning tree state */
IFLA_BRPORT_PRIORITY, /* " priority */
IFLA_BRPORT_COST, /* " cost */
IFLA_BRPORT_MODE, /* mode (hairpin) */
IFLA_BRPORT_GUARD, /* bpdu guard */
IFLA_BRPORT_PROTECT, /* root port protection */
IFLA_BRPORT_FAST_LEAVE, /* multicast fast leave */
IFLA_BRPORT_LEARNING, /* mac learning */
IFLA_BRPORT_UNICAST_FLOOD, /* flood unicast traffic */
IFLA_BRPORT_PROXYARP, /* proxy ARP */
IFLA_BRPORT_LEARNING_SYNC, /* mac learning sync from device */
IFLA_BRPORT_PROXYARP_WIFI, /* proxy ARP for Wi-Fi */
IFLA_BRPORT_ROOT_ID, /* designated root */
IFLA_BRPORT_BRIDGE_ID, /* designated bridge */
IFLA_BRPORT_DESIGNATED_PORT,
IFLA_BRPORT_DESIGNATED_COST,
IFLA_BRPORT_ID,
IFLA_BRPORT_NO,
IFLA_BRPORT_TOPOLOGY_CHANGE_ACK,
IFLA_BRPORT_CONFIG_PENDING,
IFLA_BRPORT_MESSAGE_AGE_TIMER,
IFLA_BRPORT_FORWARD_DELAY_TIMER,
IFLA_BRPORT_HOLD_TIMER,
IFLA_BRPORT_FLUSH,
IFLA_BRPORT_MULTICAST_ROUTER,
__IFLA_BRPORT_MAX
};
#define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1)
struct ifla_cacheinfo {
__u32 max_reasm_len;
__u32 tstamp; /* ipv6InterfaceTable updated timestamp */
__u32 reachable_time;
__u32 retrans_time;
};
enum {
IFLA_INFO_UNSPEC,
IFLA_INFO_KIND,
IFLA_INFO_DATA,
IFLA_INFO_XSTATS,
IFLA_INFO_SLAVE_KIND,
IFLA_INFO_SLAVE_DATA,
__IFLA_INFO_MAX,
};
#define IFLA_INFO_MAX (__IFLA_INFO_MAX - 1)
/* VLAN section */
enum {
IFLA_VLAN_UNSPEC,
IFLA_VLAN_ID,
IFLA_VLAN_FLAGS,
IFLA_VLAN_EGRESS_QOS,
IFLA_VLAN_INGRESS_QOS,
IFLA_VLAN_PROTOCOL,
__IFLA_VLAN_MAX,
};
#define IFLA_VLAN_MAX (__IFLA_VLAN_MAX - 1)
struct ifla_vlan_flags {
__u32 flags;
__u32 mask;
};
enum {
IFLA_VLAN_QOS_UNSPEC,
IFLA_VLAN_QOS_MAPPING,
__IFLA_VLAN_QOS_MAX
};
#define IFLA_VLAN_QOS_MAX (__IFLA_VLAN_QOS_MAX - 1)
struct ifla_vlan_qos_mapping {
__u32 from;
__u32 to;
};
/* MACVLAN section */
enum {
IFLA_MACVLAN_UNSPEC,
IFLA_MACVLAN_MODE,
IFLA_MACVLAN_FLAGS,
macvlan: add source mode This patch adds a new mode of operation to macvlan, called "source". It allows one to set a list of allowed mac address, which is used to match against source mac address from received frames on underlying interface. This enables creating mac based VLAN associations, instead of standard port or tag based. The feature is useful to deploy 802.1x mac based behavior, where drivers of underlying interfaces doesn't allows that. Configuration is done through the netlink interface using e.g.: ip link add link eth0 name macvlan0 type macvlan mode source ip link add link eth0 name macvlan1 type macvlan mode source ip link set link dev macvlan0 type macvlan macaddr add 00:11:11:11:11:11 ip link set link dev macvlan0 type macvlan macaddr add 00:22:22:22:22:22 ip link set link dev macvlan0 type macvlan macaddr add 00:33:33:33:33:33 ip link set link dev macvlan1 type macvlan macaddr add 00:33:33:33:33:33 ip link set link dev macvlan1 type macvlan macaddr add 00:44:44:44:44:44 This allows clients with MAC addresses 00:11:11:11:11:11, 00:22:22:22:22:22 to be part of only VLAN associated with macvlan0 interface. Clients with MAC addresses 00:44:44:44:44:44 with only VLAN associated with macvlan1 interface. And client with MAC address 00:33:33:33:33:33 to be associated with both VLANs. Based on work of Stefan Gula <steweg@gmail.com> v8: last version of Stefan Gula for Kernel 3.2.1 v9: rework onto linux-next 2014-03-12 by Michael Braun add MACADDR_SET command, enable to configure mac for source mode while creating interface v10: - reduce indention level - rename source_list to source_entry - use aligned 64bit ether address - use hash_64 instead of addr[5] v11: - rebase for 3.14 / linux-next 20.04.2014 v12 - rebase for linux-next 2014-09-25 Signed-off-by: Michael Braun <michael-dev@fami-braun.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-25 21:31:08 +07:00
IFLA_MACVLAN_MACADDR_MODE,
IFLA_MACVLAN_MACADDR,
IFLA_MACVLAN_MACADDR_DATA,
IFLA_MACVLAN_MACADDR_COUNT,
__IFLA_MACVLAN_MAX,
};
#define IFLA_MACVLAN_MAX (__IFLA_MACVLAN_MAX - 1)
enum macvlan_mode {
MACVLAN_MODE_PRIVATE = 1, /* don't talk to other macvlans */
MACVLAN_MODE_VEPA = 2, /* talk to other ports through ext bridge */
MACVLAN_MODE_BRIDGE = 4, /* talk to bridge ports directly */
MACVLAN_MODE_PASSTHRU = 8,/* take over the underlying device */
macvlan: add source mode This patch adds a new mode of operation to macvlan, called "source". It allows one to set a list of allowed mac address, which is used to match against source mac address from received frames on underlying interface. This enables creating mac based VLAN associations, instead of standard port or tag based. The feature is useful to deploy 802.1x mac based behavior, where drivers of underlying interfaces doesn't allows that. Configuration is done through the netlink interface using e.g.: ip link add link eth0 name macvlan0 type macvlan mode source ip link add link eth0 name macvlan1 type macvlan mode source ip link set link dev macvlan0 type macvlan macaddr add 00:11:11:11:11:11 ip link set link dev macvlan0 type macvlan macaddr add 00:22:22:22:22:22 ip link set link dev macvlan0 type macvlan macaddr add 00:33:33:33:33:33 ip link set link dev macvlan1 type macvlan macaddr add 00:33:33:33:33:33 ip link set link dev macvlan1 type macvlan macaddr add 00:44:44:44:44:44 This allows clients with MAC addresses 00:11:11:11:11:11, 00:22:22:22:22:22 to be part of only VLAN associated with macvlan0 interface. Clients with MAC addresses 00:44:44:44:44:44 with only VLAN associated with macvlan1 interface. And client with MAC address 00:33:33:33:33:33 to be associated with both VLANs. Based on work of Stefan Gula <steweg@gmail.com> v8: last version of Stefan Gula for Kernel 3.2.1 v9: rework onto linux-next 2014-03-12 by Michael Braun add MACADDR_SET command, enable to configure mac for source mode while creating interface v10: - reduce indention level - rename source_list to source_entry - use aligned 64bit ether address - use hash_64 instead of addr[5] v11: - rebase for 3.14 / linux-next 20.04.2014 v12 - rebase for linux-next 2014-09-25 Signed-off-by: Michael Braun <michael-dev@fami-braun.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-25 21:31:08 +07:00
MACVLAN_MODE_SOURCE = 16,/* use source MAC address list to assign */
};
enum macvlan_macaddr_mode {
MACVLAN_MACADDR_ADD,
MACVLAN_MACADDR_DEL,
MACVLAN_MACADDR_FLUSH,
MACVLAN_MACADDR_SET,
};
#define MACVLAN_FLAG_NOPROMISC 1
/* VRF section */
enum {
IFLA_VRF_UNSPEC,
IFLA_VRF_TABLE,
__IFLA_VRF_MAX
};
#define IFLA_VRF_MAX (__IFLA_VRF_MAX - 1)
enum {
IFLA_VRF_PORT_UNSPEC,
IFLA_VRF_PORT_TABLE,
__IFLA_VRF_PORT_MAX
};
#define IFLA_VRF_PORT_MAX (__IFLA_VRF_PORT_MAX - 1)
/* MACSEC section */
enum {
IFLA_MACSEC_UNSPEC,
IFLA_MACSEC_SCI,
IFLA_MACSEC_PORT,
IFLA_MACSEC_ICV_LEN,
IFLA_MACSEC_CIPHER_SUITE,
IFLA_MACSEC_WINDOW,
IFLA_MACSEC_ENCODING_SA,
IFLA_MACSEC_ENCRYPT,
IFLA_MACSEC_PROTECT,
IFLA_MACSEC_INC_SCI,
IFLA_MACSEC_ES,
IFLA_MACSEC_SCB,
IFLA_MACSEC_REPLAY_PROTECT,
IFLA_MACSEC_VALIDATION,
__IFLA_MACSEC_MAX,
};
#define IFLA_MACSEC_MAX (__IFLA_MACSEC_MAX - 1)
enum macsec_validation_type {
MACSEC_VALIDATE_DISABLED = 0,
MACSEC_VALIDATE_CHECK = 1,
MACSEC_VALIDATE_STRICT = 2,
__MACSEC_VALIDATE_END,
MACSEC_VALIDATE_MAX = __MACSEC_VALIDATE_END - 1,
};
ipvlan: Initial check-in of the IPVLAN driver. This driver is very similar to the macvlan driver except that it uses L3 on the frame to determine the logical interface while functioning as packet dispatcher. It inherits L2 of the master device hence the packets on wire will have the same L2 for all the packets originating from all virtual devices off of the same master device. This driver was developed keeping the namespace use-case in mind. Hence most of the examples given here take that as the base setup where main-device belongs to the default-ns and virtual devices are assigned to the additional namespaces. The device operates in two different modes and the difference in these two modes in primarily in the TX side. (a) L2 mode : In this mode, the device behaves as a L2 device. TX processing upto L2 happens on the stack of the virtual device associated with (namespace). Packets are switched after that into the main device (default-ns) and queued for xmit. RX processing is simple and all multicast, broadcast (if applicable), and unicast belonging to the address(es) are delivered to the virtual devices. (b) L3 mode : In this mode, the device behaves like a L3 device. TX processing upto L3 happens on the stack of the virtual device associated with (namespace). Packets are switched to the main-device (default-ns) for the L2 processing. Hence the routing table of the default-ns will be used in this mode. RX processins is somewhat similar to the L2 mode except that in this mode only Unicast packets are delivered to the virtual device while main-dev will handle all other packets. The devices can be added using the "ip" command from the iproute2 package - ip link add link <master> <virtual> type ipvlan mode [ l2 | l3 ] Signed-off-by: Mahesh Bandewar <maheshb@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Maciej Żenczykowski <maze@google.com> Cc: Laurent Chavey <chavey@google.com> Cc: Tim Hockin <thockin@google.com> Cc: Brandon Philips <brandon.philips@coreos.com> Cc: Pavel Emelianov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-24 14:07:46 +07:00
/* IPVLAN section */
enum {
IFLA_IPVLAN_UNSPEC,
IFLA_IPVLAN_MODE,
__IFLA_IPVLAN_MAX
};
#define IFLA_IPVLAN_MAX (__IFLA_IPVLAN_MAX - 1)
enum ipvlan_mode {
IPVLAN_MODE_L2 = 0,
IPVLAN_MODE_L3,
IPVLAN_MODE_MAX
};
/* VXLAN section */
enum {
IFLA_VXLAN_UNSPEC,
IFLA_VXLAN_ID,
IFLA_VXLAN_GROUP, /* group or remote address */
IFLA_VXLAN_LINK,
IFLA_VXLAN_LOCAL,
IFLA_VXLAN_TTL,
IFLA_VXLAN_TOS,
IFLA_VXLAN_LEARNING,
IFLA_VXLAN_AGEING,
IFLA_VXLAN_LIMIT,
IFLA_VXLAN_PORT_RANGE, /* source port */
IFLA_VXLAN_PROXY,
IFLA_VXLAN_RSC,
IFLA_VXLAN_L2MISS,
IFLA_VXLAN_L3MISS,
IFLA_VXLAN_PORT, /* destination port */
IFLA_VXLAN_GROUP6,
IFLA_VXLAN_LOCAL6,
IFLA_VXLAN_UDP_CSUM,
IFLA_VXLAN_UDP_ZERO_CSUM6_TX,
IFLA_VXLAN_UDP_ZERO_CSUM6_RX,
vxlan: Remote checksum offload Add support for remote checksum offload in VXLAN. This uses a reserved bit to indicate that RCO is being done, and uses the low order reserved eight bits of the VNI to hold the start and offset values in a compressed manner. Start is encoded in the low order seven bits of VNI. This is start >> 1 so that the checksum start offset is 0-254 using even values only. Checksum offset (transport checksum field) is indicated in the high order bit in the low order byte of the VNI. If the bit is set, the checksum field is for UDP (so offset = start + 6), else checksum field is for TCP (so offset = start + 16). Only TCP and UDP are supported in this implementation. Remote checksum offload for VXLAN is described in: https://tools.ietf.org/html/draft-herbert-vxlan-rco-00 Tested by running 200 TCP_STREAM connections with VXLAN (over IPv4). With UDP checksums and Remote Checksum Offload IPv4 Client 11.84% CPU utilization Server 12.96% CPU utilization 9197 Mbps IPv6 Client 12.46% CPU utilization Server 14.48% CPU utilization 8963 Mbps With UDP checksums, no remote checksum offload IPv4 Client 15.67% CPU utilization Server 14.83% CPU utilization 9094 Mbps IPv6 Client 16.21% CPU utilization Server 14.32% CPU utilization 9058 Mbps No UDP checksums IPv4 Client 15.03% CPU utilization Server 23.09% CPU utilization 9089 Mbps IPv6 Client 16.18% CPU utilization Server 26.57% CPU utilization 8954 Mbps Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13 08:00:38 +07:00
IFLA_VXLAN_REMCSUM_TX,
IFLA_VXLAN_REMCSUM_RX,
vxlan: Group Policy extension Implements supports for the Group Policy VXLAN extension [0] to provide a lightweight and simple security label mechanism across network peers based on VXLAN. The security context and associated metadata is mapped to/from skb->mark. This allows further mapping to a SELinux context using SECMARK, to implement ACLs directly with nftables, iptables, OVS, tc, etc. The group membership is defined by the lower 16 bits of skb->mark, the upper 16 bits are used for flags. SELinux allows to manage label to secure local resources. However, distributed applications require ACLs to implemented across hosts. This is typically achieved by matching on L2-L4 fields to identify the original sending host and process on the receiver. On top of that, netlabel and specifically CIPSO [1] allow to map security contexts to universal labels. However, netlabel and CIPSO are relatively complex. This patch provides a lightweight alternative for overlay network environments with a trusted underlay. No additional control protocol is required. Host 1: Host 2: Group A Group B Group B Group A +-----+ +-------------+ +-------+ +-----+ | lxc | | SELinux CTX | | httpd | | VM | +--+--+ +--+----------+ +---+---+ +--+--+ \---+---/ \----+---/ | | +---+---+ +---+---+ | vxlan | | vxlan | +---+---+ +---+---+ +------------------------------+ Backwards compatibility: A VXLAN-GBP socket can receive standard VXLAN frames and will assign the default group 0x0000 to such frames. A Linux VXLAN socket will drop VXLAN-GBP frames. The extension is therefore disabled by default and needs to be specifically enabled: ip link add [...] type vxlan [...] gbp In a mixed environment with VXLAN and VXLAN-GBP sockets, the GBP socket must run on a separate port number. Examples: iptables: host1# iptables -I OUTPUT -m owner --uid-owner 101 -j MARK --set-mark 0x200 host2# iptables -I INPUT -m mark --mark 0x200 -j DROP OVS: # ovs-ofctl add-flow br0 'in_port=1,actions=load:0x200->NXM_NX_TUN_GBP_ID[],NORMAL' # ovs-ofctl add-flow br0 'in_port=2,tun_gbp_id=0x200,actions=drop' [0] https://tools.ietf.org/html/draft-smith-vxlan-group-policy [1] http://lwn.net/Articles/204905/ Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 09:53:55 +07:00
IFLA_VXLAN_GBP,
IFLA_VXLAN_REMCSUM_NOPARTIAL,
IFLA_VXLAN_COLLECT_METADATA,
IFLA_VXLAN_LABEL,
__IFLA_VXLAN_MAX
};
#define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1)
struct ifla_vxlan_port_range {
__be16 low;
__be16 high;
};
/* GENEVE section */
enum {
IFLA_GENEVE_UNSPEC,
IFLA_GENEVE_ID,
IFLA_GENEVE_REMOTE,
IFLA_GENEVE_TTL,
IFLA_GENEVE_TOS,
IFLA_GENEVE_PORT, /* destination port */
IFLA_GENEVE_COLLECT_METADATA,
IFLA_GENEVE_REMOTE6,
IFLA_GENEVE_UDP_CSUM,
IFLA_GENEVE_UDP_ZERO_CSUM6_TX,
IFLA_GENEVE_UDP_ZERO_CSUM6_RX,
IFLA_GENEVE_LABEL,
__IFLA_GENEVE_MAX
};
#define IFLA_GENEVE_MAX (__IFLA_GENEVE_MAX - 1)
/* Bonding section */
enum {
IFLA_BOND_UNSPEC,
IFLA_BOND_MODE,
IFLA_BOND_ACTIVE_SLAVE,
IFLA_BOND_MIIMON,
IFLA_BOND_UPDELAY,
IFLA_BOND_DOWNDELAY,
IFLA_BOND_USE_CARRIER,
IFLA_BOND_ARP_INTERVAL,
IFLA_BOND_ARP_IP_TARGET,
IFLA_BOND_ARP_VALIDATE,
IFLA_BOND_ARP_ALL_TARGETS,
IFLA_BOND_PRIMARY,
IFLA_BOND_PRIMARY_RESELECT,
IFLA_BOND_FAIL_OVER_MAC,
IFLA_BOND_XMIT_HASH_POLICY,
IFLA_BOND_RESEND_IGMP,
IFLA_BOND_NUM_PEER_NOTIF,
IFLA_BOND_ALL_SLAVES_ACTIVE,
IFLA_BOND_MIN_LINKS,
IFLA_BOND_LP_INTERVAL,
IFLA_BOND_PACKETS_PER_SLAVE,
IFLA_BOND_AD_LACP_RATE,
IFLA_BOND_AD_SELECT,
IFLA_BOND_AD_INFO,
IFLA_BOND_AD_ACTOR_SYS_PRIO,
IFLA_BOND_AD_USER_PORT_KEY,
IFLA_BOND_AD_ACTOR_SYSTEM,
IFLA_BOND_TLB_DYNAMIC_LB,
__IFLA_BOND_MAX,
};
#define IFLA_BOND_MAX (__IFLA_BOND_MAX - 1)
enum {
IFLA_BOND_AD_INFO_UNSPEC,
IFLA_BOND_AD_INFO_AGGREGATOR,
IFLA_BOND_AD_INFO_NUM_PORTS,
IFLA_BOND_AD_INFO_ACTOR_KEY,
IFLA_BOND_AD_INFO_PARTNER_KEY,
IFLA_BOND_AD_INFO_PARTNER_MAC,
__IFLA_BOND_AD_INFO_MAX,
};
#define IFLA_BOND_AD_INFO_MAX (__IFLA_BOND_AD_INFO_MAX - 1)
enum {
IFLA_BOND_SLAVE_UNSPEC,
IFLA_BOND_SLAVE_STATE,
IFLA_BOND_SLAVE_MII_STATUS,
IFLA_BOND_SLAVE_LINK_FAILURE_COUNT,
IFLA_BOND_SLAVE_PERM_HWADDR,
IFLA_BOND_SLAVE_QUEUE_ID,
IFLA_BOND_SLAVE_AD_AGGREGATOR_ID,
IFLA_BOND_SLAVE_AD_ACTOR_OPER_PORT_STATE,
IFLA_BOND_SLAVE_AD_PARTNER_OPER_PORT_STATE,
__IFLA_BOND_SLAVE_MAX,
};
#define IFLA_BOND_SLAVE_MAX (__IFLA_BOND_SLAVE_MAX - 1)
/* SR-IOV virtual function management section */
enum {
IFLA_VF_INFO_UNSPEC,
IFLA_VF_INFO,
__IFLA_VF_INFO_MAX,
};
#define IFLA_VF_INFO_MAX (__IFLA_VF_INFO_MAX - 1)
enum {
IFLA_VF_UNSPEC,
IFLA_VF_MAC, /* Hardware queue specific attributes */
IFLA_VF_VLAN,
net-next:v4: Add support to configure SR-IOV VF minimum and maximum Tx rate through ip tool. o min_tx_rate puts lower limit on the VF bandwidth. VF is guaranteed to have a bandwidth of at least this value. max_tx_rate puts cap on the VF bandwidth. VF can have a bandwidth of up to this value. o A new handler set_vf_rate for attr IFLA_VF_RATE has been introduced which takes 4 arguments: netdev, VF number, min_tx_rate, max_tx_rate o ndo_set_vf_rate replaces ndo_set_vf_tx_rate handler. o Drivers that currently implement ndo_set_vf_tx_rate should now call ndo_set_vf_rate instead and reject attempt to set a minimum bandwidth greater than 0 for IFLA_VF_TX_RATE when IFLA_VF_RATE is not yet implemented by driver. o If user enters only one of either min_tx_rate or max_tx_rate, then, userland should read back the other value from driver and set both for IFLA_VF_RATE. Drivers that have not yet implemented IFLA_VF_RATE should always return min_tx_rate as 0 when read from ip tool. o If both IFLA_VF_TX_RATE and IFLA_VF_RATE options are specified, then IFLA_VF_RATE should override. o Idea is to have consistent display of rate values to user. o Usage example: - ./ip link set p4p1 vf 0 rate 900 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 900 (Mbps), max_tx_rate 900Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a ./ip link set p4p1 vf 0 max_tx_rate 300 min_tx_rate 200 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 300 (Mbps), max_tx_rate 300Mbps, min_tx_rate 200Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a ./ip link set p4p1 vf 0 max_tx_rate 600 rate 300 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5, tx rate 600 (Mbps), max_tx_rate 600Mbps, min_tx_rate 200Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-22 20:59:05 +07:00
IFLA_VF_TX_RATE, /* Max TX Bandwidth Allocation */
IFLA_VF_SPOOFCHK, /* Spoof Checking on/off switch */
IFLA_VF_LINK_STATE, /* link state enable/disable/auto switch */
net-next:v4: Add support to configure SR-IOV VF minimum and maximum Tx rate through ip tool. o min_tx_rate puts lower limit on the VF bandwidth. VF is guaranteed to have a bandwidth of at least this value. max_tx_rate puts cap on the VF bandwidth. VF can have a bandwidth of up to this value. o A new handler set_vf_rate for attr IFLA_VF_RATE has been introduced which takes 4 arguments: netdev, VF number, min_tx_rate, max_tx_rate o ndo_set_vf_rate replaces ndo_set_vf_tx_rate handler. o Drivers that currently implement ndo_set_vf_tx_rate should now call ndo_set_vf_rate instead and reject attempt to set a minimum bandwidth greater than 0 for IFLA_VF_TX_RATE when IFLA_VF_RATE is not yet implemented by driver. o If user enters only one of either min_tx_rate or max_tx_rate, then, userland should read back the other value from driver and set both for IFLA_VF_RATE. Drivers that have not yet implemented IFLA_VF_RATE should always return min_tx_rate as 0 when read from ip tool. o If both IFLA_VF_TX_RATE and IFLA_VF_RATE options are specified, then IFLA_VF_RATE should override. o Idea is to have consistent display of rate values to user. o Usage example: - ./ip link set p4p1 vf 0 rate 900 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 900 (Mbps), max_tx_rate 900Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a ./ip link set p4p1 vf 0 max_tx_rate 300 min_tx_rate 200 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 300 (Mbps), max_tx_rate 300Mbps, min_tx_rate 200Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a ./ip link set p4p1 vf 0 max_tx_rate 600 rate 300 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5, tx rate 600 (Mbps), max_tx_rate 600Mbps, min_tx_rate 200Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-22 20:59:05 +07:00
IFLA_VF_RATE, /* Min and Max TX Bandwidth Allocation */
IFLA_VF_RSS_QUERY_EN, /* RSS Redirection Table and Hash Key query
* on/off switch
*/
IFLA_VF_STATS, /* network device statistics */
IFLA_VF_TRUST, /* Trust VF */
IFLA_VF_IB_NODE_GUID, /* VF Infiniband node GUID */
IFLA_VF_IB_PORT_GUID, /* VF Infiniband port GUID */
__IFLA_VF_MAX,
};
#define IFLA_VF_MAX (__IFLA_VF_MAX - 1)
struct ifla_vf_mac {
__u32 vf;
__u8 mac[32]; /* MAX_ADDR_LEN */
};
struct ifla_vf_vlan {
__u32 vf;
__u32 vlan; /* 0 - 4095, 0 disables VLAN filter */
__u32 qos;
};
struct ifla_vf_tx_rate {
__u32 vf;
__u32 rate; /* Max TX bandwidth in Mbps, 0 disables throttling */
};
net-next:v4: Add support to configure SR-IOV VF minimum and maximum Tx rate through ip tool. o min_tx_rate puts lower limit on the VF bandwidth. VF is guaranteed to have a bandwidth of at least this value. max_tx_rate puts cap on the VF bandwidth. VF can have a bandwidth of up to this value. o A new handler set_vf_rate for attr IFLA_VF_RATE has been introduced which takes 4 arguments: netdev, VF number, min_tx_rate, max_tx_rate o ndo_set_vf_rate replaces ndo_set_vf_tx_rate handler. o Drivers that currently implement ndo_set_vf_tx_rate should now call ndo_set_vf_rate instead and reject attempt to set a minimum bandwidth greater than 0 for IFLA_VF_TX_RATE when IFLA_VF_RATE is not yet implemented by driver. o If user enters only one of either min_tx_rate or max_tx_rate, then, userland should read back the other value from driver and set both for IFLA_VF_RATE. Drivers that have not yet implemented IFLA_VF_RATE should always return min_tx_rate as 0 when read from ip tool. o If both IFLA_VF_TX_RATE and IFLA_VF_RATE options are specified, then IFLA_VF_RATE should override. o Idea is to have consistent display of rate values to user. o Usage example: - ./ip link set p4p1 vf 0 rate 900 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 900 (Mbps), max_tx_rate 900Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a ./ip link set p4p1 vf 0 max_tx_rate 300 min_tx_rate 200 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 300 (Mbps), max_tx_rate 300Mbps, min_tx_rate 200Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a ./ip link set p4p1 vf 0 max_tx_rate 600 rate 300 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5, tx rate 600 (Mbps), max_tx_rate 600Mbps, min_tx_rate 200Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-22 20:59:05 +07:00
struct ifla_vf_rate {
__u32 vf;
__u32 min_tx_rate; /* Min Bandwidth in Mbps */
__u32 max_tx_rate; /* Max Bandwidth in Mbps */
};
struct ifla_vf_spoofchk {
__u32 vf;
__u32 setting;
};
struct ifla_vf_guid {
__u32 vf;
__u64 guid;
};
enum {
IFLA_VF_LINK_STATE_AUTO, /* link state of the uplink */
IFLA_VF_LINK_STATE_ENABLE, /* link always up */
IFLA_VF_LINK_STATE_DISABLE, /* link always down */
__IFLA_VF_LINK_STATE_MAX,
};
struct ifla_vf_link_state {
__u32 vf;
__u32 link_state;
};
struct ifla_vf_rss_query_en {
__u32 vf;
__u32 setting;
};
enum {
IFLA_VF_STATS_RX_PACKETS,
IFLA_VF_STATS_TX_PACKETS,
IFLA_VF_STATS_RX_BYTES,
IFLA_VF_STATS_TX_BYTES,
IFLA_VF_STATS_BROADCAST,
IFLA_VF_STATS_MULTICAST,
__IFLA_VF_STATS_MAX,
};
#define IFLA_VF_STATS_MAX (__IFLA_VF_STATS_MAX - 1)
struct ifla_vf_trust {
__u32 vf;
__u32 setting;
};
/* VF ports management section
*
* Nested layout of set/get msg is:
*
* [IFLA_NUM_VF]
* [IFLA_VF_PORTS]
* [IFLA_VF_PORT]
* [IFLA_PORT_*], ...
* [IFLA_VF_PORT]
* [IFLA_PORT_*], ...
* ...
* [IFLA_PORT_SELF]
* [IFLA_PORT_*], ...
*/
enum {
IFLA_VF_PORT_UNSPEC,
IFLA_VF_PORT, /* nest */
__IFLA_VF_PORT_MAX,
};
#define IFLA_VF_PORT_MAX (__IFLA_VF_PORT_MAX - 1)
enum {
IFLA_PORT_UNSPEC,
IFLA_PORT_VF, /* __u32 */
IFLA_PORT_PROFILE, /* string */
IFLA_PORT_VSI_TYPE, /* 802.1Qbg (pre-)standard VDP */
IFLA_PORT_INSTANCE_UUID, /* binary UUID */
IFLA_PORT_HOST_UUID, /* binary UUID */
IFLA_PORT_REQUEST, /* __u8 */
IFLA_PORT_RESPONSE, /* __u16, output only */
__IFLA_PORT_MAX,
};
#define IFLA_PORT_MAX (__IFLA_PORT_MAX - 1)
#define PORT_PROFILE_MAX 40
#define PORT_UUID_MAX 16
#define PORT_SELF_VF -1
enum {
PORT_REQUEST_PREASSOCIATE = 0,
PORT_REQUEST_PREASSOCIATE_RR,
PORT_REQUEST_ASSOCIATE,
PORT_REQUEST_DISASSOCIATE,
};
enum {
PORT_VDP_RESPONSE_SUCCESS = 0,
PORT_VDP_RESPONSE_INVALID_FORMAT,
PORT_VDP_RESPONSE_INSUFFICIENT_RESOURCES,
PORT_VDP_RESPONSE_UNUSED_VTID,
PORT_VDP_RESPONSE_VTID_VIOLATION,
PORT_VDP_RESPONSE_VTID_VERSION_VIOALTION,
PORT_VDP_RESPONSE_OUT_OF_SYNC,
/* 0x08-0xFF reserved for future VDP use */
PORT_PROFILE_RESPONSE_SUCCESS = 0x100,
PORT_PROFILE_RESPONSE_INPROGRESS,
PORT_PROFILE_RESPONSE_INVALID,
PORT_PROFILE_RESPONSE_BADSTATE,
PORT_PROFILE_RESPONSE_INSUFFICIENT_RESOURCES,
PORT_PROFILE_RESPONSE_ERROR,
};
struct ifla_port_vsi {
__u8 vsi_mgr_id;
__u8 vsi_type_id[3];
__u8 vsi_type_version;
__u8 pad[3];
};
/* IPoIB section */
enum {
IFLA_IPOIB_UNSPEC,
IFLA_IPOIB_PKEY,
IFLA_IPOIB_MODE,
IFLA_IPOIB_UMCAST,
__IFLA_IPOIB_MAX
};
enum {
IPOIB_MODE_DATAGRAM = 0, /* using unreliable datagram QPs */
IPOIB_MODE_CONNECTED = 1, /* using connected QPs */
};
#define IFLA_IPOIB_MAX (__IFLA_IPOIB_MAX - 1)
/* HSR section */
enum {
IFLA_HSR_UNSPEC,
IFLA_HSR_SLAVE1,
IFLA_HSR_SLAVE2,
IFLA_HSR_MULTICAST_SPEC, /* Last byte of supervision addr */
IFLA_HSR_SUPERVISION_ADDR, /* Supervision frame multicast addr */
IFLA_HSR_SEQ_NR,
__IFLA_HSR_MAX,
};
#define IFLA_HSR_MAX (__IFLA_HSR_MAX - 1)
#endif /* _UAPI_LINUX_IF_LINK_H */