mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-30 12:06:41 +07:00
52 lines
1.3 KiB
Plaintext
52 lines
1.3 KiB
Plaintext
|
Kernel driver i2c-ocores
|
||
|
|
|
||
|
|
Supported adapters:
|
||
|
|
* OpenCores.org I2C controller by Richard Herveille (see datasheet link)
|
||
|
|
Datasheet: http://www.opencores.org/projects.cgi/web/i2c/overview
|
||
|
|
|
||
|
|
Author: Peter Korsgaard <jacmet@sunsite.dk>
|
||
|
|
|
||
|
|
Description
|
||
|
|
-----------
|
||
|
|
|
||
|
|
i2c-ocores is an i2c bus driver for the OpenCores.org I2C controller
|
||
|
|
IP core by Richard Herveille.
|
||
|
|
|
||
|
|
Usage
|
||
|
|
-----
|
||
|
|
|
||
|
|
i2c-ocores uses the platform bus, so you need to provide a struct
|
||
|
|
platform_device with the base address and interrupt number. The
|
||
|
|
dev.platform_data of the device should also point to a struct
|
||
|
|
ocores_i2c_platform_data (see linux/i2c-ocores.h) describing the
|
||
|
|
distance between registers and the input clock speed.
|
||
|
|
|
||
|
|
E.G. something like:
|
||
|
|
|
||
|
|
static struct resource ocores_resources[] = {
|
||
|
|
[0] = {
|
||
|
|
.start = MYI2C_BASEADDR,
|
||
|
|
.end = MYI2C_BASEADDR + 8,
|
||
|
|
.flags = IORESOURCE_MEM,
|
||
|
|
},
|
||
|
|
[1] = {
|
||
|
|
.start = MYI2C_IRQ,
|
||
|
|
.end = MYI2C_IRQ,
|
||
|
|
.flags = IORESOURCE_IRQ,
|
||
|
|
},
|
||
|
|
};
|
||
|
|
|
||
|
|
static struct ocores_i2c_platform_data myi2c_data = {
|
||
|
|
.regstep = 2, /* two bytes between registers */
|
||
|
|
.clock_khz = 50000, /* input clock of 50MHz */
|
||
|
|
};
|
||
|
|
|
||
|
|
static struct platform_device myi2c = {
|
||
|
|
.name = "ocores-i2c",
|
||
|
|
.dev = {
|
||
|
|
.platform_data = &myi2c_data,
|
||
|
|
},
|
||
|
|
.num_resources = ARRAY_SIZE(ocores_resources),
|
||
|
|
.resource = ocores_resources,
|
||
|
|
};
|