linux_dsm_epyc7002/drivers/spi/spi-fsl-dspi.c

1223 lines
30 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
//
// Copyright 2013 Freescale Semiconductor, Inc.
//
// Freescale DSPI driver
// This file contains a driver for the Freescale DSPI
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/pinctrl/consumer.h>
#include <linux/regmap.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi-fsl-dspi.h>
#define DRIVER_NAME "fsl-dspi"
#ifdef CONFIG_M5441x
#define DSPI_FIFO_SIZE 16
#else
#define DSPI_FIFO_SIZE 4
#endif
#define DSPI_DMA_BUFSIZE (DSPI_FIFO_SIZE * 1024)
#define SPI_MCR 0x00
#define SPI_MCR_MASTER BIT(31)
#define SPI_MCR_PCSIS (0x3F << 16)
#define SPI_MCR_CLR_TXF BIT(11)
#define SPI_MCR_CLR_RXF BIT(10)
#define SPI_MCR_XSPI BIT(3)
#define SPI_TCR 0x08
#define SPI_TCR_GET_TCNT(x) (((x) & GENMASK(31, 16)) >> 16)
#define SPI_CTAR(x) (0x0c + (((x) & GENMASK(1, 0)) * 4))
#define SPI_CTAR_FMSZ(x) (((x) << 27) & GENMASK(30, 27))
#define SPI_CTAR_CPOL BIT(26)
#define SPI_CTAR_CPHA BIT(25)
#define SPI_CTAR_LSBFE BIT(24)
#define SPI_CTAR_PCSSCK(x) (((x) << 22) & GENMASK(23, 22))
#define SPI_CTAR_PASC(x) (((x) << 20) & GENMASK(21, 20))
#define SPI_CTAR_PDT(x) (((x) << 18) & GENMASK(19, 18))
#define SPI_CTAR_PBR(x) (((x) << 16) & GENMASK(17, 16))
#define SPI_CTAR_CSSCK(x) (((x) << 12) & GENMASK(15, 12))
#define SPI_CTAR_ASC(x) (((x) << 8) & GENMASK(11, 8))
#define SPI_CTAR_DT(x) (((x) << 4) & GENMASK(7, 4))
#define SPI_CTAR_BR(x) ((x) & GENMASK(3, 0))
#define SPI_CTAR_SCALE_BITS 0xf
#define SPI_CTAR0_SLAVE 0x0c
#define SPI_SR 0x2c
#define SPI_SR_TCFQF BIT(31)
#define SPI_SR_EOQF BIT(28)
#define SPI_SR_TFUF BIT(27)
#define SPI_SR_TFFF BIT(25)
#define SPI_SR_CMDTCF BIT(23)
#define SPI_SR_SPEF BIT(21)
#define SPI_SR_RFOF BIT(19)
#define SPI_SR_TFIWF BIT(18)
#define SPI_SR_RFDF BIT(17)
#define SPI_SR_CMDFFF BIT(16)
#define SPI_SR_CLEAR (SPI_SR_TCFQF | SPI_SR_EOQF | \
SPI_SR_TFUF | SPI_SR_TFFF | \
SPI_SR_CMDTCF | SPI_SR_SPEF | \
SPI_SR_RFOF | SPI_SR_TFIWF | \
SPI_SR_RFDF | SPI_SR_CMDFFF)
#define SPI_RSER_TFFFE BIT(25)
#define SPI_RSER_TFFFD BIT(24)
#define SPI_RSER_RFDFE BIT(17)
#define SPI_RSER_RFDFD BIT(16)
#define SPI_RSER 0x30
#define SPI_RSER_TCFQE BIT(31)
#define SPI_RSER_EOQFE BIT(28)
#define SPI_PUSHR 0x34
#define SPI_PUSHR_CMD_CONT BIT(15)
#define SPI_PUSHR_CMD_CTAS(x) (((x) << 12 & GENMASK(14, 12)))
#define SPI_PUSHR_CMD_EOQ BIT(11)
#define SPI_PUSHR_CMD_CTCNT BIT(10)
#define SPI_PUSHR_CMD_PCS(x) (BIT(x) & GENMASK(5, 0))
#define SPI_PUSHR_SLAVE 0x34
#define SPI_POPR 0x38
#define SPI_TXFR0 0x3c
#define SPI_TXFR1 0x40
#define SPI_TXFR2 0x44
#define SPI_TXFR3 0x48
#define SPI_RXFR0 0x7c
#define SPI_RXFR1 0x80
#define SPI_RXFR2 0x84
#define SPI_RXFR3 0x88
#define SPI_CTARE(x) (0x11c + (((x) & GENMASK(1, 0)) * 4))
#define SPI_CTARE_FMSZE(x) (((x) & 0x1) << 16)
#define SPI_CTARE_DTCP(x) ((x) & 0x7ff)
#define SPI_SREX 0x13c
#define SPI_FRAME_BITS(bits) SPI_CTAR_FMSZ((bits) - 1)
#define SPI_FRAME_EBITS(bits) SPI_CTARE_FMSZE(((bits) - 1) >> 4)
/* Register offsets for regmap_pushr */
#define PUSHR_CMD 0x0
#define PUSHR_TX 0x2
#define DMA_COMPLETION_TIMEOUT msecs_to_jiffies(3000)
struct chip_data {
u32 ctar_val;
u16 void_write_data;
};
enum dspi_trans_mode {
DSPI_EOQ_MODE = 0,
DSPI_TCFQ_MODE,
DSPI_DMA_MODE,
};
struct fsl_dspi_devtype_data {
enum dspi_trans_mode trans_mode;
u8 max_clock_factor;
bool ptp_sts_supported;
bool xspi_mode;
};
static const struct fsl_dspi_devtype_data vf610_data = {
.trans_mode = DSPI_DMA_MODE,
.max_clock_factor = 2,
};
static const struct fsl_dspi_devtype_data ls1021a_v1_data = {
.trans_mode = DSPI_TCFQ_MODE,
.max_clock_factor = 8,
.ptp_sts_supported = true,
.xspi_mode = true,
};
static const struct fsl_dspi_devtype_data ls2085a_data = {
.trans_mode = DSPI_TCFQ_MODE,
.max_clock_factor = 8,
.ptp_sts_supported = true,
};
static const struct fsl_dspi_devtype_data coldfire_data = {
.trans_mode = DSPI_EOQ_MODE,
.max_clock_factor = 8,
};
struct fsl_dspi_dma {
/* Length of transfer in words of DSPI_FIFO_SIZE */
u32 curr_xfer_len;
u32 *tx_dma_buf;
struct dma_chan *chan_tx;
dma_addr_t tx_dma_phys;
struct completion cmd_tx_complete;
struct dma_async_tx_descriptor *tx_desc;
u32 *rx_dma_buf;
struct dma_chan *chan_rx;
dma_addr_t rx_dma_phys;
struct completion cmd_rx_complete;
struct dma_async_tx_descriptor *rx_desc;
};
struct fsl_dspi {
struct spi_controller *ctlr;
struct platform_device *pdev;
struct regmap *regmap;
struct regmap *regmap_pushr;
int irq;
struct clk *clk;
struct spi_transfer *cur_transfer;
struct spi_message *cur_msg;
struct chip_data *cur_chip;
size_t progress;
size_t len;
const void *tx;
void *rx;
void *rx_end;
u16 void_write_data;
u16 tx_cmd;
u8 bits_per_word;
u8 bytes_per_word;
const struct fsl_dspi_devtype_data *devtype_data;
wait_queue_head_t waitq;
u32 waitflags;
struct fsl_dspi_dma *dma;
};
static u32 dspi_pop_tx(struct fsl_dspi *dspi)
{
u32 txdata = 0;
if (dspi->tx) {
if (dspi->bytes_per_word == 1)
txdata = *(u8 *)dspi->tx;
else if (dspi->bytes_per_word == 2)
txdata = *(u16 *)dspi->tx;
else /* dspi->bytes_per_word == 4 */
txdata = *(u32 *)dspi->tx;
dspi->tx += dspi->bytes_per_word;
}
dspi->len -= dspi->bytes_per_word;
return txdata;
}
static u32 dspi_pop_tx_pushr(struct fsl_dspi *dspi)
{
u16 cmd = dspi->tx_cmd, data = dspi_pop_tx(dspi);
if (spi_controller_is_slave(dspi->ctlr))
return data;
if (dspi->len > 0)
cmd |= SPI_PUSHR_CMD_CONT;
return cmd << 16 | data;
}
static void dspi_push_rx(struct fsl_dspi *dspi, u32 rxdata)
{
if (!dspi->rx)
return;
/* Mask off undefined bits */
rxdata &= (1 << dspi->bits_per_word) - 1;
if (dspi->bytes_per_word == 1)
*(u8 *)dspi->rx = rxdata;
else if (dspi->bytes_per_word == 2)
*(u16 *)dspi->rx = rxdata;
else /* dspi->bytes_per_word == 4 */
*(u32 *)dspi->rx = rxdata;
dspi->rx += dspi->bytes_per_word;
}
static void dspi_tx_dma_callback(void *arg)
{
struct fsl_dspi *dspi = arg;
struct fsl_dspi_dma *dma = dspi->dma;
complete(&dma->cmd_tx_complete);
}
static void dspi_rx_dma_callback(void *arg)
{
struct fsl_dspi *dspi = arg;
struct fsl_dspi_dma *dma = dspi->dma;
int i;
if (dspi->rx) {
for (i = 0; i < dma->curr_xfer_len; i++)
dspi_push_rx(dspi, dspi->dma->rx_dma_buf[i]);
}
complete(&dma->cmd_rx_complete);
}
static int dspi_next_xfer_dma_submit(struct fsl_dspi *dspi)
{
struct device *dev = &dspi->pdev->dev;
struct fsl_dspi_dma *dma = dspi->dma;
int time_left;
int i;
for (i = 0; i < dma->curr_xfer_len; i++)
dspi->dma->tx_dma_buf[i] = dspi_pop_tx_pushr(dspi);
dma->tx_desc = dmaengine_prep_slave_single(dma->chan_tx,
dma->tx_dma_phys,
dma->curr_xfer_len *
DMA_SLAVE_BUSWIDTH_4_BYTES,
DMA_MEM_TO_DEV,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!dma->tx_desc) {
dev_err(dev, "Not able to get desc for DMA xfer\n");
return -EIO;
}
dma->tx_desc->callback = dspi_tx_dma_callback;
dma->tx_desc->callback_param = dspi;
if (dma_submit_error(dmaengine_submit(dma->tx_desc))) {
dev_err(dev, "DMA submit failed\n");
return -EINVAL;
}
dma->rx_desc = dmaengine_prep_slave_single(dma->chan_rx,
dma->rx_dma_phys,
dma->curr_xfer_len *
DMA_SLAVE_BUSWIDTH_4_BYTES,
DMA_DEV_TO_MEM,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!dma->rx_desc) {
dev_err(dev, "Not able to get desc for DMA xfer\n");
return -EIO;
}
dma->rx_desc->callback = dspi_rx_dma_callback;
dma->rx_desc->callback_param = dspi;
if (dma_submit_error(dmaengine_submit(dma->rx_desc))) {
dev_err(dev, "DMA submit failed\n");
return -EINVAL;
}
reinit_completion(&dspi->dma->cmd_rx_complete);
reinit_completion(&dspi->dma->cmd_tx_complete);
dma_async_issue_pending(dma->chan_rx);
dma_async_issue_pending(dma->chan_tx);
if (spi_controller_is_slave(dspi->ctlr)) {
wait_for_completion_interruptible(&dspi->dma->cmd_rx_complete);
return 0;
}
time_left = wait_for_completion_timeout(&dspi->dma->cmd_tx_complete,
DMA_COMPLETION_TIMEOUT);
if (time_left == 0) {
dev_err(dev, "DMA tx timeout\n");
dmaengine_terminate_all(dma->chan_tx);
dmaengine_terminate_all(dma->chan_rx);
return -ETIMEDOUT;
}
time_left = wait_for_completion_timeout(&dspi->dma->cmd_rx_complete,
DMA_COMPLETION_TIMEOUT);
if (time_left == 0) {
dev_err(dev, "DMA rx timeout\n");
dmaengine_terminate_all(dma->chan_tx);
dmaengine_terminate_all(dma->chan_rx);
return -ETIMEDOUT;
}
return 0;
}
static int dspi_dma_xfer(struct fsl_dspi *dspi)
{
struct spi_message *message = dspi->cur_msg;
struct device *dev = &dspi->pdev->dev;
struct fsl_dspi_dma *dma = dspi->dma;
int curr_remaining_bytes;
int bytes_per_buffer;
int ret = 0;
curr_remaining_bytes = dspi->len;
bytes_per_buffer = DSPI_DMA_BUFSIZE / DSPI_FIFO_SIZE;
while (curr_remaining_bytes) {
/* Check if current transfer fits the DMA buffer */
dma->curr_xfer_len = curr_remaining_bytes
/ dspi->bytes_per_word;
if (dma->curr_xfer_len > bytes_per_buffer)
dma->curr_xfer_len = bytes_per_buffer;
ret = dspi_next_xfer_dma_submit(dspi);
if (ret) {
dev_err(dev, "DMA transfer failed\n");
goto exit;
} else {
const int len =
dma->curr_xfer_len * dspi->bytes_per_word;
curr_remaining_bytes -= len;
message->actual_length += len;
if (curr_remaining_bytes < 0)
curr_remaining_bytes = 0;
}
}
exit:
return ret;
}
static int dspi_request_dma(struct fsl_dspi *dspi, phys_addr_t phy_addr)
{
struct device *dev = &dspi->pdev->dev;
struct dma_slave_config cfg;
struct fsl_dspi_dma *dma;
int ret;
dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL);
if (!dma)
return -ENOMEM;
dma->chan_rx = dma_request_chan(dev, "rx");
if (IS_ERR(dma->chan_rx)) {
dev_err(dev, "rx dma channel not available\n");
ret = PTR_ERR(dma->chan_rx);
return ret;
}
dma->chan_tx = dma_request_chan(dev, "tx");
if (IS_ERR(dma->chan_tx)) {
dev_err(dev, "tx dma channel not available\n");
ret = PTR_ERR(dma->chan_tx);
goto err_tx_channel;
}
dma->tx_dma_buf = dma_alloc_coherent(dev, DSPI_DMA_BUFSIZE,
&dma->tx_dma_phys, GFP_KERNEL);
if (!dma->tx_dma_buf) {
ret = -ENOMEM;
goto err_tx_dma_buf;
}
dma->rx_dma_buf = dma_alloc_coherent(dev, DSPI_DMA_BUFSIZE,
&dma->rx_dma_phys, GFP_KERNEL);
if (!dma->rx_dma_buf) {
ret = -ENOMEM;
goto err_rx_dma_buf;
}
cfg.src_addr = phy_addr + SPI_POPR;
cfg.dst_addr = phy_addr + SPI_PUSHR;
cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
cfg.src_maxburst = 1;
cfg.dst_maxburst = 1;
cfg.direction = DMA_DEV_TO_MEM;
ret = dmaengine_slave_config(dma->chan_rx, &cfg);
if (ret) {
dev_err(dev, "can't configure rx dma channel\n");
ret = -EINVAL;
goto err_slave_config;
}
cfg.direction = DMA_MEM_TO_DEV;
ret = dmaengine_slave_config(dma->chan_tx, &cfg);
if (ret) {
dev_err(dev, "can't configure tx dma channel\n");
ret = -EINVAL;
goto err_slave_config;
}
dspi->dma = dma;
init_completion(&dma->cmd_tx_complete);
init_completion(&dma->cmd_rx_complete);
return 0;
err_slave_config:
dma_free_coherent(dev, DSPI_DMA_BUFSIZE,
dma->rx_dma_buf, dma->rx_dma_phys);
err_rx_dma_buf:
dma_free_coherent(dev, DSPI_DMA_BUFSIZE,
dma->tx_dma_buf, dma->tx_dma_phys);
err_tx_dma_buf:
dma_release_channel(dma->chan_tx);
err_tx_channel:
dma_release_channel(dma->chan_rx);
devm_kfree(dev, dma);
dspi->dma = NULL;
return ret;
}
static void dspi_release_dma(struct fsl_dspi *dspi)
{
struct fsl_dspi_dma *dma = dspi->dma;
struct device *dev = &dspi->pdev->dev;
if (!dma)
return;
if (dma->chan_tx) {
dma_unmap_single(dev, dma->tx_dma_phys,
DSPI_DMA_BUFSIZE, DMA_TO_DEVICE);
dma_release_channel(dma->chan_tx);
}
if (dma->chan_rx) {
dma_unmap_single(dev, dma->rx_dma_phys,
DSPI_DMA_BUFSIZE, DMA_FROM_DEVICE);
dma_release_channel(dma->chan_rx);
}
}
static void hz_to_spi_baud(char *pbr, char *br, int speed_hz,
unsigned long clkrate)
{
/* Valid baud rate pre-scaler values */
int pbr_tbl[4] = {2, 3, 5, 7};
int brs[16] = { 2, 4, 6, 8,
16, 32, 64, 128,
256, 512, 1024, 2048,
4096, 8192, 16384, 32768 };
int scale_needed, scale, minscale = INT_MAX;
int i, j;
scale_needed = clkrate / speed_hz;
if (clkrate % speed_hz)
scale_needed++;
for (i = 0; i < ARRAY_SIZE(brs); i++)
for (j = 0; j < ARRAY_SIZE(pbr_tbl); j++) {
scale = brs[i] * pbr_tbl[j];
if (scale >= scale_needed) {
if (scale < minscale) {
minscale = scale;
*br = i;
*pbr = j;
}
break;
}
}
if (minscale == INT_MAX) {
pr_warn("Can not find valid baud rate,speed_hz is %d,clkrate is %ld, we use the max prescaler value.\n",
speed_hz, clkrate);
*pbr = ARRAY_SIZE(pbr_tbl) - 1;
*br = ARRAY_SIZE(brs) - 1;
}
}
static void ns_delay_scale(char *psc, char *sc, int delay_ns,
unsigned long clkrate)
{
int scale_needed, scale, minscale = INT_MAX;
int pscale_tbl[4] = {1, 3, 5, 7};
u32 remainder;
int i, j;
scale_needed = div_u64_rem((u64)delay_ns * clkrate, NSEC_PER_SEC,
&remainder);
if (remainder)
scale_needed++;
for (i = 0; i < ARRAY_SIZE(pscale_tbl); i++)
for (j = 0; j <= SPI_CTAR_SCALE_BITS; j++) {
scale = pscale_tbl[i] * (2 << j);
if (scale >= scale_needed) {
if (scale < minscale) {
minscale = scale;
*psc = i;
*sc = j;
}
break;
}
}
if (minscale == INT_MAX) {
pr_warn("Cannot find correct scale values for %dns delay at clkrate %ld, using max prescaler value",
delay_ns, clkrate);
*psc = ARRAY_SIZE(pscale_tbl) - 1;
*sc = SPI_CTAR_SCALE_BITS;
}
}
static void fifo_write(struct fsl_dspi *dspi)
{
regmap_write(dspi->regmap, SPI_PUSHR, dspi_pop_tx_pushr(dspi));
}
static void cmd_fifo_write(struct fsl_dspi *dspi)
{
u16 cmd = dspi->tx_cmd;
if (dspi->len > 0)
cmd |= SPI_PUSHR_CMD_CONT;
regmap_write(dspi->regmap_pushr, PUSHR_CMD, cmd);
}
static void tx_fifo_write(struct fsl_dspi *dspi, u16 txdata)
{
regmap_write(dspi->regmap_pushr, PUSHR_TX, txdata);
}
static void dspi_tcfq_write(struct fsl_dspi *dspi)
{
/* Clear transfer count */
dspi->tx_cmd |= SPI_PUSHR_CMD_CTCNT;
if (dspi->devtype_data->xspi_mode && dspi->bits_per_word > 16) {
spi: spi-fsl-dspi: Fix 16-bit word order in 32-bit XSPI mode When used in Extended SPI mode on LS1021A, the DSPI controller wants to have the least significant 16-bit word written first to the TX FIFO. In fact, the LS1021A reference manual says: 33.5.2.4.2 Draining the TX FIFO When Extended SPI Mode (DSPIx_MCR[XSPI]) is enabled, if the frame size of SPI Data to be transmitted is more than 16 bits, then it causes two Data entries to be popped from TX FIFO simultaneously which are transferred to the shift register. The first of the two popped entries forms the 16 least significant bits of the SPI frame to be transmitted. So given the following TX buffer: +-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+ | 0x0 | 0x1 | 0x2 | 0x3 | 0x4 | 0x5 | 0x6 | 0x7 | 0x8 | 0x9 | 0xa | 0xb | +-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+ | 32-bit word 1 | 32-bit word 2 | 32-bit word 3 | +-----------------------+-----------------------+-----------------------+ The correct way that a little-endian system should transmit it on the wire when bits_per_word is 32 is: 0x03020100 0x07060504 0x0b0a0908 But it is actually transmitted as following, as seen with a scope: 0x01000302 0x05040706 0x09080b0a It appears that this patch has been submitted at least once before: https://lkml.org/lkml/2018/9/21/286 but in that case Chuanhua Han did not manage to explain the problem clearly enough and the patch did not get merged, leaving XSPI mode broken. Fixes: 8fcd151d2619 ("spi: spi-fsl-dspi: XSPI FIFO handling (in TCFQ mode)") Cc: Esben Haabendal <eha@deif.com> Cc: Chuanhua Han <chuanhua.han@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20191228135536.14284-1-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2019-12-28 20:55:36 +07:00
/* Write the CMD FIFO entry first, and then the two
* corresponding TX FIFO entries.
*/
u32 data = dspi_pop_tx(dspi);
cmd_fifo_write(dspi);
spi: spi-fsl-dspi: Fix 16-bit word order in 32-bit XSPI mode When used in Extended SPI mode on LS1021A, the DSPI controller wants to have the least significant 16-bit word written first to the TX FIFO. In fact, the LS1021A reference manual says: 33.5.2.4.2 Draining the TX FIFO When Extended SPI Mode (DSPIx_MCR[XSPI]) is enabled, if the frame size of SPI Data to be transmitted is more than 16 bits, then it causes two Data entries to be popped from TX FIFO simultaneously which are transferred to the shift register. The first of the two popped entries forms the 16 least significant bits of the SPI frame to be transmitted. So given the following TX buffer: +-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+ | 0x0 | 0x1 | 0x2 | 0x3 | 0x4 | 0x5 | 0x6 | 0x7 | 0x8 | 0x9 | 0xa | 0xb | +-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+ | 32-bit word 1 | 32-bit word 2 | 32-bit word 3 | +-----------------------+-----------------------+-----------------------+ The correct way that a little-endian system should transmit it on the wire when bits_per_word is 32 is: 0x03020100 0x07060504 0x0b0a0908 But it is actually transmitted as following, as seen with a scope: 0x01000302 0x05040706 0x09080b0a It appears that this patch has been submitted at least once before: https://lkml.org/lkml/2018/9/21/286 but in that case Chuanhua Han did not manage to explain the problem clearly enough and the patch did not get merged, leaving XSPI mode broken. Fixes: 8fcd151d2619 ("spi: spi-fsl-dspi: XSPI FIFO handling (in TCFQ mode)") Cc: Esben Haabendal <eha@deif.com> Cc: Chuanhua Han <chuanhua.han@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20191228135536.14284-1-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2019-12-28 20:55:36 +07:00
tx_fifo_write(dspi, data & 0xFFFF);
tx_fifo_write(dspi, data >> 16);
} else {
/* Write one entry to both TX FIFO and CMD FIFO
* simultaneously.
*/
fifo_write(dspi);
}
}
static u32 fifo_read(struct fsl_dspi *dspi)
{
u32 rxdata = 0;
regmap_read(dspi->regmap, SPI_POPR, &rxdata);
return rxdata;
}
static void dspi_tcfq_read(struct fsl_dspi *dspi)
{
dspi_push_rx(dspi, fifo_read(dspi));
}
static void dspi_eoq_write(struct fsl_dspi *dspi)
{
int fifo_size = DSPI_FIFO_SIZE;
u16 xfer_cmd = dspi->tx_cmd;
/* Fill TX FIFO with as many transfers as possible */
while (dspi->len && fifo_size--) {
dspi->tx_cmd = xfer_cmd;
/* Request EOQF for last transfer in FIFO */
if (dspi->len == dspi->bytes_per_word || fifo_size == 0)
dspi->tx_cmd |= SPI_PUSHR_CMD_EOQ;
/* Clear transfer count for first transfer in FIFO */
if (fifo_size == (DSPI_FIFO_SIZE - 1))
dspi->tx_cmd |= SPI_PUSHR_CMD_CTCNT;
/* Write combined TX FIFO and CMD FIFO entry */
fifo_write(dspi);
}
}
static void dspi_eoq_read(struct fsl_dspi *dspi)
{
int fifo_size = DSPI_FIFO_SIZE;
/* Read one FIFO entry and push to rx buffer */
while ((dspi->rx < dspi->rx_end) && fifo_size--)
dspi_push_rx(dspi, fifo_read(dspi));
}
static int dspi_rxtx(struct fsl_dspi *dspi)
{
struct spi_message *msg = dspi->cur_msg;
enum dspi_trans_mode trans_mode;
u16 spi_tcnt;
u32 spi_tcr;
spi_take_timestamp_post(dspi->ctlr, dspi->cur_transfer,
dspi->progress, !dspi->irq);
/* Get transfer counter (in number of SPI transfers). It was
* reset to 0 when transfer(s) were started.
*/
regmap_read(dspi->regmap, SPI_TCR, &spi_tcr);
spi_tcnt = SPI_TCR_GET_TCNT(spi_tcr);
/* Update total number of bytes that were transferred */
msg->actual_length += spi_tcnt * dspi->bytes_per_word;
dspi->progress += spi_tcnt;
trans_mode = dspi->devtype_data->trans_mode;
if (trans_mode == DSPI_EOQ_MODE)
dspi_eoq_read(dspi);
else if (trans_mode == DSPI_TCFQ_MODE)
dspi_tcfq_read(dspi);
if (!dspi->len)
/* Success! */
return 0;
spi_take_timestamp_pre(dspi->ctlr, dspi->cur_transfer,
dspi->progress, !dspi->irq);
if (trans_mode == DSPI_EOQ_MODE)
dspi_eoq_write(dspi);
else if (trans_mode == DSPI_TCFQ_MODE)
dspi_tcfq_write(dspi);
return -EINPROGRESS;
}
static int dspi_poll(struct fsl_dspi *dspi)
{
int tries = 1000;
u32 spi_sr;
do {
regmap_read(dspi->regmap, SPI_SR, &spi_sr);
regmap_write(dspi->regmap, SPI_SR, spi_sr);
if (spi_sr & (SPI_SR_EOQF | SPI_SR_TCFQF))
break;
} while (--tries);
if (!tries)
return -ETIMEDOUT;
return dspi_rxtx(dspi);
}
static irqreturn_t dspi_interrupt(int irq, void *dev_id)
{
struct fsl_dspi *dspi = (struct fsl_dspi *)dev_id;
u32 spi_sr;
regmap_read(dspi->regmap, SPI_SR, &spi_sr);
regmap_write(dspi->regmap, SPI_SR, spi_sr);
spi: spi-fsl-dspi: Always use the TCFQ devices in poll mode With this patch, the "interrupts" property from the device tree bindings is ignored, even if present, if the driver runs in TCFQ mode. Switching to using the DSPI in poll mode has several distinct benefits: - With interrupts, the DSPI driver in TCFQ mode raises an IRQ after each transmitted word. There is more time wasted for the "waitq" event than for actual I/O. And the DSPI IRQ count can easily get the largest in /proc/interrupts on Freescale boards with attached SPI devices. - The SPI I/O time is both lower, and more consistently so. Attached to some Freescale devices are either PTP switches, or SPI RTCs. For reading time off of a SPI slave device, it is important that all SPI transfers take a deterministic time to complete. - In poll mode there is much less time spent by the CPU in hardirq context, which helps with the response latency of the system, and at the same time there is more control over when interrupts must be disabled (to get a precise timestamp measurement, which will come in a future patch): win-win. On the LS1021A-TSN board, where the SPI device is a SJA1105 PTP switch (with a bits_per_word=8 driver), I created a "benchmark" where I periodically transferred a 12-byte message once per second, for 120 seconds. I then recorded the time before putting the first byte in the TX FIFO, and the time after reading the last byte from the RX FIFO. That is the transfer delay in nanoseconds. Interrupt mode: delay: min 125120 max 168320 mean 150286 std dev 17675.3 Poll mode: delay: min 69440 max 119040 mean 70312.9 std dev 8065.34 Both the mean latency and the standard deviation are more than 50% lower in poll mode than in interrupt mode, and the 'max' in poll mode is lower than the 'min' in interrupt mode. This is with an 'ondemand' governor on an otherwise idle system - therefore running mostly at 600 MHz out of a max of 1200 MHz. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20191001205216.32115-1-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-02 03:52:16 +07:00
if (!(spi_sr & SPI_SR_EOQF))
return IRQ_NONE;
spi: spi-fsl-dspi: Fix race condition in TCFQ/EOQ interrupt When the driver is working in TCFQ/EOQ mode (i.e. interacts with the SPI controller's FIFOs directly) the following sequence of operations happens: - The first byte of the tx buffer gets pushed to the TX FIFO (dspi->len gets decremented). This triggers the train of interrupts that handle the rest of the bytes. - The dspi_interrupt handles a TX confirmation event. It reads the newly available byte from the RX FIFO, checks the dspi->len exit condition, and if there's more to be done, it kicks off the next interrupt in the train by writing the next byte to the TX FIFO. Now the problem is that the wait queue is woken up one byte too early, because dspi->len becomes 0 as soon as the byte has been pushed into the TX FIFO. Its interrupt has not yet been processed and the RX byte has not been put from the FIFO into the buffer. Depending on the timing of the wait queue wakeup vs the handling of the last dspi_interrupt, it can happen that the main SPI message pump thread has already returned back into the spi_device driver. When the rx buffer is on stack (which it can be, because in this mode, the DSPI doesn't do DMA), the last interrupt will perform a memory write into an rx buffer that has been freed. This manifests as stack corruption. The solution is to only wake up the wait queue when dspi_rxtx says so, i.e. after it has processed the last TX confirmation interrupt and collected the last RX byte. Fixes: c55be3059159 ("spi: spi-fsl-dspi: Use poll mode in case the platform IRQ is missing") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20190903105708.32273-1-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-03 17:57:08 +07:00
if (dspi_rxtx(dspi) == 0) {
dspi->waitflags = 1;
wake_up_interruptible(&dspi->waitq);
}
return IRQ_HANDLED;
}
static int dspi_transfer_one_message(struct spi_controller *ctlr,
struct spi_message *message)
{
struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr);
struct spi_device *spi = message->spi;
enum dspi_trans_mode trans_mode;
struct spi_transfer *transfer;
int status = 0;
message->actual_length = 0;
list_for_each_entry(transfer, &message->transfers, transfer_list) {
dspi->cur_transfer = transfer;
dspi->cur_msg = message;
dspi->cur_chip = spi_get_ctldata(spi);
/* Prepare command word for CMD FIFO */
dspi->tx_cmd = SPI_PUSHR_CMD_CTAS(0) |
SPI_PUSHR_CMD_PCS(spi->chip_select);
if (list_is_last(&dspi->cur_transfer->transfer_list,
&dspi->cur_msg->transfers)) {
/* Leave PCS activated after last transfer when
* cs_change is set.
*/
if (transfer->cs_change)
dspi->tx_cmd |= SPI_PUSHR_CMD_CONT;
} else {
/* Keep PCS active between transfers in same message
* when cs_change is not set, and de-activate PCS
* between transfers in the same message when
* cs_change is set.
*/
if (!transfer->cs_change)
dspi->tx_cmd |= SPI_PUSHR_CMD_CONT;
}
dspi->void_write_data = dspi->cur_chip->void_write_data;
dspi->tx = transfer->tx_buf;
dspi->rx = transfer->rx_buf;
dspi->rx_end = dspi->rx + transfer->len;
dspi->len = transfer->len;
dspi->progress = 0;
/* Validated transfer specific frame size (defaults applied) */
dspi->bits_per_word = transfer->bits_per_word;
if (transfer->bits_per_word <= 8)
dspi->bytes_per_word = 1;
else if (transfer->bits_per_word <= 16)
dspi->bytes_per_word = 2;
else
dspi->bytes_per_word = 4;
regmap_update_bits(dspi->regmap, SPI_MCR,
SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF,
SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF);
regmap_write(dspi->regmap, SPI_CTAR(0),
dspi->cur_chip->ctar_val |
SPI_FRAME_BITS(transfer->bits_per_word));
if (dspi->devtype_data->xspi_mode)
regmap_write(dspi->regmap, SPI_CTARE(0),
SPI_FRAME_EBITS(transfer->bits_per_word) |
SPI_CTARE_DTCP(1));
spi_take_timestamp_pre(dspi->ctlr, dspi->cur_transfer,
dspi->progress, !dspi->irq);
trans_mode = dspi->devtype_data->trans_mode;
switch (trans_mode) {
case DSPI_EOQ_MODE:
regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_EOQFE);
dspi_eoq_write(dspi);
break;
case DSPI_TCFQ_MODE:
regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_TCFQE);
dspi_tcfq_write(dspi);
break;
case DSPI_DMA_MODE:
regmap_write(dspi->regmap, SPI_RSER,
SPI_RSER_TFFFE | SPI_RSER_TFFFD |
SPI_RSER_RFDFE | SPI_RSER_RFDFD);
status = dspi_dma_xfer(dspi);
break;
default:
dev_err(&dspi->pdev->dev, "unsupported trans_mode %u\n",
trans_mode);
status = -EINVAL;
goto out;
}
if (!dspi->irq) {
do {
status = dspi_poll(dspi);
} while (status == -EINPROGRESS);
} else if (trans_mode != DSPI_DMA_MODE) {
status = wait_event_interruptible(dspi->waitq,
dspi->waitflags);
dspi->waitflags = 0;
}
if (status)
dev_err(&dspi->pdev->dev,
"Waiting for transfer to complete failed!\n");
spi_transfer_delay_exec(transfer);
}
out:
message->status = status;
spi_finalize_current_message(ctlr);
return status;
}
static int dspi_setup(struct spi_device *spi)
{
struct fsl_dspi *dspi = spi_controller_get_devdata(spi->controller);
unsigned char br = 0, pbr = 0, pcssck = 0, cssck = 0;
u32 cs_sck_delay = 0, sck_cs_delay = 0;
struct fsl_dspi_platform_data *pdata;
unsigned char pasc = 0, asc = 0;
struct chip_data *chip;
unsigned long clkrate;
/* Only alloc on first setup */
chip = spi_get_ctldata(spi);
if (chip == NULL) {
chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
if (!chip)
return -ENOMEM;
}
pdata = dev_get_platdata(&dspi->pdev->dev);
if (!pdata) {
of_property_read_u32(spi->dev.of_node, "fsl,spi-cs-sck-delay",
&cs_sck_delay);
of_property_read_u32(spi->dev.of_node, "fsl,spi-sck-cs-delay",
&sck_cs_delay);
} else {
cs_sck_delay = pdata->cs_sck_delay;
sck_cs_delay = pdata->sck_cs_delay;
}
chip->void_write_data = 0;
clkrate = clk_get_rate(dspi->clk);
hz_to_spi_baud(&pbr, &br, spi->max_speed_hz, clkrate);
/* Set PCS to SCK delay scale values */
ns_delay_scale(&pcssck, &cssck, cs_sck_delay, clkrate);
/* Set After SCK delay scale values */
ns_delay_scale(&pasc, &asc, sck_cs_delay, clkrate);
chip->ctar_val = 0;
if (spi->mode & SPI_CPOL)
chip->ctar_val |= SPI_CTAR_CPOL;
if (spi->mode & SPI_CPHA)
chip->ctar_val |= SPI_CTAR_CPHA;
if (!spi_controller_is_slave(dspi->ctlr)) {
chip->ctar_val |= SPI_CTAR_PCSSCK(pcssck) |
SPI_CTAR_CSSCK(cssck) |
SPI_CTAR_PASC(pasc) |
SPI_CTAR_ASC(asc) |
SPI_CTAR_PBR(pbr) |
SPI_CTAR_BR(br);
if (spi->mode & SPI_LSB_FIRST)
chip->ctar_val |= SPI_CTAR_LSBFE;
}
spi_set_ctldata(spi, chip);
return 0;
}
static void dspi_cleanup(struct spi_device *spi)
{
struct chip_data *chip = spi_get_ctldata((struct spi_device *)spi);
dev_dbg(&spi->dev, "spi_device %u.%u cleanup\n",
spi->controller->bus_num, spi->chip_select);
kfree(chip);
}
static const struct of_device_id fsl_dspi_dt_ids[] = {
{ .compatible = "fsl,vf610-dspi", .data = &vf610_data, },
{ .compatible = "fsl,ls1021a-v1.0-dspi", .data = &ls1021a_v1_data, },
{ .compatible = "fsl,ls2085a-dspi", .data = &ls2085a_data, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, fsl_dspi_dt_ids);
#ifdef CONFIG_PM_SLEEP
static int dspi_suspend(struct device *dev)
{
struct spi_controller *ctlr = dev_get_drvdata(dev);
struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr);
spi_controller_suspend(ctlr);
clk_disable_unprepare(dspi->clk);
pinctrl_pm_select_sleep_state(dev);
return 0;
}
static int dspi_resume(struct device *dev)
{
struct spi_controller *ctlr = dev_get_drvdata(dev);
struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr);
int ret;
pinctrl_pm_select_default_state(dev);
ret = clk_prepare_enable(dspi->clk);
if (ret)
return ret;
spi_controller_resume(ctlr);
return 0;
}
#endif /* CONFIG_PM_SLEEP */
static SIMPLE_DEV_PM_OPS(dspi_pm, dspi_suspend, dspi_resume);
static const struct regmap_range dspi_volatile_ranges[] = {
regmap_reg_range(SPI_MCR, SPI_TCR),
regmap_reg_range(SPI_SR, SPI_SR),
regmap_reg_range(SPI_PUSHR, SPI_RXFR3),
};
static const struct regmap_access_table dspi_volatile_table = {
.yes_ranges = dspi_volatile_ranges,
.n_yes_ranges = ARRAY_SIZE(dspi_volatile_ranges),
};
static const struct regmap_config dspi_regmap_config = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
.max_register = 0x88,
.volatile_table = &dspi_volatile_table,
};
static const struct regmap_range dspi_xspi_volatile_ranges[] = {
regmap_reg_range(SPI_MCR, SPI_TCR),
regmap_reg_range(SPI_SR, SPI_SR),
regmap_reg_range(SPI_PUSHR, SPI_RXFR3),
regmap_reg_range(SPI_SREX, SPI_SREX),
};
static const struct regmap_access_table dspi_xspi_volatile_table = {
.yes_ranges = dspi_xspi_volatile_ranges,
.n_yes_ranges = ARRAY_SIZE(dspi_xspi_volatile_ranges),
};
static const struct regmap_config dspi_xspi_regmap_config[] = {
{
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
.max_register = 0x13c,
.volatile_table = &dspi_xspi_volatile_table,
},
{
.name = "pushr",
.reg_bits = 16,
.val_bits = 16,
.reg_stride = 2,
.max_register = 0x2,
},
};
static void dspi_init(struct fsl_dspi *dspi)
{
unsigned int mcr = SPI_MCR_PCSIS;
if (dspi->devtype_data->xspi_mode)
mcr |= SPI_MCR_XSPI;
if (!spi_controller_is_slave(dspi->ctlr))
mcr |= SPI_MCR_MASTER;
regmap_write(dspi->regmap, SPI_MCR, mcr);
regmap_write(dspi->regmap, SPI_SR, SPI_SR_CLEAR);
if (dspi->devtype_data->xspi_mode)
regmap_write(dspi->regmap, SPI_CTARE(0),
SPI_CTARE_FMSZE(0) | SPI_CTARE_DTCP(1));
}
static int dspi_slave_abort(struct spi_master *master)
{
struct fsl_dspi *dspi = spi_master_get_devdata(master);
/*
* Terminate all pending DMA transactions for the SPI working
* in SLAVE mode.
*/
dmaengine_terminate_sync(dspi->dma->chan_rx);
dmaengine_terminate_sync(dspi->dma->chan_tx);
/* Clear the internal DSPI RX and TX FIFO buffers */
regmap_update_bits(dspi->regmap, SPI_MCR,
SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF,
SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF);
return 0;
}
static int dspi_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
const struct regmap_config *regmap_config;
struct fsl_dspi_platform_data *pdata;
struct spi_controller *ctlr;
int ret, cs_num, bus_num;
struct fsl_dspi *dspi;
struct resource *res;
void __iomem *base;
ctlr = spi_alloc_master(&pdev->dev, sizeof(struct fsl_dspi));
if (!ctlr)
return -ENOMEM;
dspi = spi_controller_get_devdata(ctlr);
dspi->pdev = pdev;
dspi->ctlr = ctlr;
ctlr->setup = dspi_setup;
ctlr->transfer_one_message = dspi_transfer_one_message;
ctlr->dev.of_node = pdev->dev.of_node;
ctlr->cleanup = dspi_cleanup;
ctlr->slave_abort = dspi_slave_abort;
ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
pdata = dev_get_platdata(&pdev->dev);
if (pdata) {
ctlr->num_chipselect = pdata->cs_num;
ctlr->bus_num = pdata->bus_num;
dspi->devtype_data = &coldfire_data;
} else {
ret = of_property_read_u32(np, "spi-num-chipselects", &cs_num);
if (ret < 0) {
dev_err(&pdev->dev, "can't get spi-num-chipselects\n");
goto out_ctlr_put;
}
ctlr->num_chipselect = cs_num;
ret = of_property_read_u32(np, "bus-num", &bus_num);
if (ret < 0) {
dev_err(&pdev->dev, "can't get bus-num\n");
goto out_ctlr_put;
}
ctlr->bus_num = bus_num;
if (of_property_read_bool(np, "spi-slave"))
ctlr->slave = true;
dspi->devtype_data = of_device_get_match_data(&pdev->dev);
if (!dspi->devtype_data) {
dev_err(&pdev->dev, "can't get devtype_data\n");
ret = -EFAULT;
goto out_ctlr_put;
}
}
if (dspi->devtype_data->xspi_mode)
ctlr->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
else
ctlr->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(base)) {
ret = PTR_ERR(base);
goto out_ctlr_put;
}
if (dspi->devtype_data->xspi_mode)
regmap_config = &dspi_xspi_regmap_config[0];
else
regmap_config = &dspi_regmap_config;
dspi->regmap = devm_regmap_init_mmio(&pdev->dev, base, regmap_config);
if (IS_ERR(dspi->regmap)) {
dev_err(&pdev->dev, "failed to init regmap: %ld\n",
PTR_ERR(dspi->regmap));
ret = PTR_ERR(dspi->regmap);
goto out_ctlr_put;
}
if (dspi->devtype_data->xspi_mode) {
dspi->regmap_pushr = devm_regmap_init_mmio(
&pdev->dev, base + SPI_PUSHR,
&dspi_xspi_regmap_config[1]);
if (IS_ERR(dspi->regmap_pushr)) {
dev_err(&pdev->dev,
"failed to init pushr regmap: %ld\n",
PTR_ERR(dspi->regmap_pushr));
ret = PTR_ERR(dspi->regmap_pushr);
goto out_ctlr_put;
}
}
spi: spi-fsl-dspi: Fix imprecise abort on VF500 during probe Registers of DSPI should not be accessed before enabling its clock. On Toradex Colibri VF50 on Iris carrier board this could be seen during bootup as imprecise abort: Unhandled fault: imprecise external abort (0x1c06) at 0x00000000 Internal error: : 1c06 [#1] ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.39-dirty #97 Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) Backtrace: [<804166a8>] (regmap_write) from [<80466b5c>] (dspi_probe+0x1f0/0x8dc) [<8046696c>] (dspi_probe) from [<8040107c>] (platform_drv_probe+0x54/0xb8) [<80401028>] (platform_drv_probe) from [<803ff53c>] (driver_probe_device+0x280/0x2f8) [<803ff2bc>] (driver_probe_device) from [<803ff674>] (__driver_attach+0xc0/0xc4) [<803ff5b4>] (__driver_attach) from [<803fd818>] (bus_for_each_dev+0x70/0xa4) [<803fd7a8>] (bus_for_each_dev) from [<803fee74>] (driver_attach+0x24/0x28) [<803fee50>] (driver_attach) from [<803fe980>] (bus_add_driver+0x1a0/0x218) [<803fe7e0>] (bus_add_driver) from [<803fffe8>] (driver_register+0x80/0x100) [<803fff68>] (driver_register) from [<80400fdc>] (__platform_driver_register+0x48/0x50) [<80400f94>] (__platform_driver_register) from [<8091cf7c>] (fsl_dspi_driver_init+0x1c/0x20) [<8091cf60>] (fsl_dspi_driver_init) from [<8010195c>] (do_one_initcall+0x4c/0x174) [<80101910>] (do_one_initcall) from [<80900e8c>] (kernel_init_freeable+0x144/0x1d8) [<80900d48>] (kernel_init_freeable) from [<805ff6a8>] (kernel_init+0x10/0x114) [<805ff698>] (kernel_init) from [<80107be8>] (ret_from_fork+0x14/0x2c) Cc: <stable@vger.kernel.org> Fixes: 5ee67b587a2b ("spi: dspi: clear SPI_SR before enable interrupt") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-29 18:33:09 +07:00
dspi->clk = devm_clk_get(&pdev->dev, "dspi");
if (IS_ERR(dspi->clk)) {
ret = PTR_ERR(dspi->clk);
dev_err(&pdev->dev, "unable to get clock\n");
goto out_ctlr_put;
spi: spi-fsl-dspi: Fix imprecise abort on VF500 during probe Registers of DSPI should not be accessed before enabling its clock. On Toradex Colibri VF50 on Iris carrier board this could be seen during bootup as imprecise abort: Unhandled fault: imprecise external abort (0x1c06) at 0x00000000 Internal error: : 1c06 [#1] ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.39-dirty #97 Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) Backtrace: [<804166a8>] (regmap_write) from [<80466b5c>] (dspi_probe+0x1f0/0x8dc) [<8046696c>] (dspi_probe) from [<8040107c>] (platform_drv_probe+0x54/0xb8) [<80401028>] (platform_drv_probe) from [<803ff53c>] (driver_probe_device+0x280/0x2f8) [<803ff2bc>] (driver_probe_device) from [<803ff674>] (__driver_attach+0xc0/0xc4) [<803ff5b4>] (__driver_attach) from [<803fd818>] (bus_for_each_dev+0x70/0xa4) [<803fd7a8>] (bus_for_each_dev) from [<803fee74>] (driver_attach+0x24/0x28) [<803fee50>] (driver_attach) from [<803fe980>] (bus_add_driver+0x1a0/0x218) [<803fe7e0>] (bus_add_driver) from [<803fffe8>] (driver_register+0x80/0x100) [<803fff68>] (driver_register) from [<80400fdc>] (__platform_driver_register+0x48/0x50) [<80400f94>] (__platform_driver_register) from [<8091cf7c>] (fsl_dspi_driver_init+0x1c/0x20) [<8091cf60>] (fsl_dspi_driver_init) from [<8010195c>] (do_one_initcall+0x4c/0x174) [<80101910>] (do_one_initcall) from [<80900e8c>] (kernel_init_freeable+0x144/0x1d8) [<80900d48>] (kernel_init_freeable) from [<805ff6a8>] (kernel_init+0x10/0x114) [<805ff698>] (kernel_init) from [<80107be8>] (ret_from_fork+0x14/0x2c) Cc: <stable@vger.kernel.org> Fixes: 5ee67b587a2b ("spi: dspi: clear SPI_SR before enable interrupt") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-29 18:33:09 +07:00
}
ret = clk_prepare_enable(dspi->clk);
if (ret)
goto out_ctlr_put;
spi: spi-fsl-dspi: Fix imprecise abort on VF500 during probe Registers of DSPI should not be accessed before enabling its clock. On Toradex Colibri VF50 on Iris carrier board this could be seen during bootup as imprecise abort: Unhandled fault: imprecise external abort (0x1c06) at 0x00000000 Internal error: : 1c06 [#1] ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.39-dirty #97 Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) Backtrace: [<804166a8>] (regmap_write) from [<80466b5c>] (dspi_probe+0x1f0/0x8dc) [<8046696c>] (dspi_probe) from [<8040107c>] (platform_drv_probe+0x54/0xb8) [<80401028>] (platform_drv_probe) from [<803ff53c>] (driver_probe_device+0x280/0x2f8) [<803ff2bc>] (driver_probe_device) from [<803ff674>] (__driver_attach+0xc0/0xc4) [<803ff5b4>] (__driver_attach) from [<803fd818>] (bus_for_each_dev+0x70/0xa4) [<803fd7a8>] (bus_for_each_dev) from [<803fee74>] (driver_attach+0x24/0x28) [<803fee50>] (driver_attach) from [<803fe980>] (bus_add_driver+0x1a0/0x218) [<803fe7e0>] (bus_add_driver) from [<803fffe8>] (driver_register+0x80/0x100) [<803fff68>] (driver_register) from [<80400fdc>] (__platform_driver_register+0x48/0x50) [<80400f94>] (__platform_driver_register) from [<8091cf7c>] (fsl_dspi_driver_init+0x1c/0x20) [<8091cf60>] (fsl_dspi_driver_init) from [<8010195c>] (do_one_initcall+0x4c/0x174) [<80101910>] (do_one_initcall) from [<80900e8c>] (kernel_init_freeable+0x144/0x1d8) [<80900d48>] (kernel_init_freeable) from [<805ff6a8>] (kernel_init+0x10/0x114) [<805ff698>] (kernel_init) from [<80107be8>] (ret_from_fork+0x14/0x2c) Cc: <stable@vger.kernel.org> Fixes: 5ee67b587a2b ("spi: dspi: clear SPI_SR before enable interrupt") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-29 18:33:09 +07:00
dspi_init(dspi);
spi: spi-fsl-dspi: Always use the TCFQ devices in poll mode With this patch, the "interrupts" property from the device tree bindings is ignored, even if present, if the driver runs in TCFQ mode. Switching to using the DSPI in poll mode has several distinct benefits: - With interrupts, the DSPI driver in TCFQ mode raises an IRQ after each transmitted word. There is more time wasted for the "waitq" event than for actual I/O. And the DSPI IRQ count can easily get the largest in /proc/interrupts on Freescale boards with attached SPI devices. - The SPI I/O time is both lower, and more consistently so. Attached to some Freescale devices are either PTP switches, or SPI RTCs. For reading time off of a SPI slave device, it is important that all SPI transfers take a deterministic time to complete. - In poll mode there is much less time spent by the CPU in hardirq context, which helps with the response latency of the system, and at the same time there is more control over when interrupts must be disabled (to get a precise timestamp measurement, which will come in a future patch): win-win. On the LS1021A-TSN board, where the SPI device is a SJA1105 PTP switch (with a bits_per_word=8 driver), I created a "benchmark" where I periodically transferred a 12-byte message once per second, for 120 seconds. I then recorded the time before putting the first byte in the TX FIFO, and the time after reading the last byte from the RX FIFO. That is the transfer delay in nanoseconds. Interrupt mode: delay: min 125120 max 168320 mean 150286 std dev 17675.3 Poll mode: delay: min 69440 max 119040 mean 70312.9 std dev 8065.34 Both the mean latency and the standard deviation are more than 50% lower in poll mode than in interrupt mode, and the 'max' in poll mode is lower than the 'min' in interrupt mode. This is with an 'ondemand' governor on an otherwise idle system - therefore running mostly at 600 MHz out of a max of 1200 MHz. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20191001205216.32115-1-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-02 03:52:16 +07:00
if (dspi->devtype_data->trans_mode == DSPI_TCFQ_MODE)
goto poll_mode;
dspi->irq = platform_get_irq(pdev, 0);
if (dspi->irq <= 0) {
dev_info(&pdev->dev,
"can't get platform irq, using poll mode\n");
dspi->irq = 0;
goto poll_mode;
}
ret = devm_request_irq(&pdev->dev, dspi->irq, dspi_interrupt,
IRQF_SHARED, pdev->name, dspi);
if (ret < 0) {
dev_err(&pdev->dev, "Unable to attach DSPI interrupt\n");
spi: spi-fsl-dspi: Fix imprecise abort on VF500 during probe Registers of DSPI should not be accessed before enabling its clock. On Toradex Colibri VF50 on Iris carrier board this could be seen during bootup as imprecise abort: Unhandled fault: imprecise external abort (0x1c06) at 0x00000000 Internal error: : 1c06 [#1] ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.39-dirty #97 Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) Backtrace: [<804166a8>] (regmap_write) from [<80466b5c>] (dspi_probe+0x1f0/0x8dc) [<8046696c>] (dspi_probe) from [<8040107c>] (platform_drv_probe+0x54/0xb8) [<80401028>] (platform_drv_probe) from [<803ff53c>] (driver_probe_device+0x280/0x2f8) [<803ff2bc>] (driver_probe_device) from [<803ff674>] (__driver_attach+0xc0/0xc4) [<803ff5b4>] (__driver_attach) from [<803fd818>] (bus_for_each_dev+0x70/0xa4) [<803fd7a8>] (bus_for_each_dev) from [<803fee74>] (driver_attach+0x24/0x28) [<803fee50>] (driver_attach) from [<803fe980>] (bus_add_driver+0x1a0/0x218) [<803fe7e0>] (bus_add_driver) from [<803fffe8>] (driver_register+0x80/0x100) [<803fff68>] (driver_register) from [<80400fdc>] (__platform_driver_register+0x48/0x50) [<80400f94>] (__platform_driver_register) from [<8091cf7c>] (fsl_dspi_driver_init+0x1c/0x20) [<8091cf60>] (fsl_dspi_driver_init) from [<8010195c>] (do_one_initcall+0x4c/0x174) [<80101910>] (do_one_initcall) from [<80900e8c>] (kernel_init_freeable+0x144/0x1d8) [<80900d48>] (kernel_init_freeable) from [<805ff6a8>] (kernel_init+0x10/0x114) [<805ff698>] (kernel_init) from [<80107be8>] (ret_from_fork+0x14/0x2c) Cc: <stable@vger.kernel.org> Fixes: 5ee67b587a2b ("spi: dspi: clear SPI_SR before enable interrupt") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-29 18:33:09 +07:00
goto out_clk_put;
}
init_waitqueue_head(&dspi->waitq);
poll_mode:
if (dspi->devtype_data->trans_mode == DSPI_DMA_MODE) {
ret = dspi_request_dma(dspi, res->start);
if (ret < 0) {
dev_err(&pdev->dev, "can't get dma channels\n");
goto out_clk_put;
}
}
ctlr->max_speed_hz =
clk_get_rate(dspi->clk) / dspi->devtype_data->max_clock_factor;
ctlr->ptp_sts_supported = dspi->devtype_data->ptp_sts_supported;
platform_set_drvdata(pdev, ctlr);
ret = spi_register_controller(ctlr);
if (ret != 0) {
dev_err(&pdev->dev, "Problem registering DSPI ctlr\n");
goto out_clk_put;
}
return ret;
out_clk_put:
clk_disable_unprepare(dspi->clk);
out_ctlr_put:
spi_controller_put(ctlr);
return ret;
}
static int dspi_remove(struct platform_device *pdev)
{
struct spi_controller *ctlr = platform_get_drvdata(pdev);
struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr);
/* Disconnect from the SPI framework */
dspi_release_dma(dspi);
clk_disable_unprepare(dspi->clk);
spi_unregister_controller(dspi->ctlr);
return 0;
}
static struct platform_driver fsl_dspi_driver = {
.driver.name = DRIVER_NAME,
.driver.of_match_table = fsl_dspi_dt_ids,
.driver.owner = THIS_MODULE,
.driver.pm = &dspi_pm,
.probe = dspi_probe,
.remove = dspi_remove,
};
module_platform_driver(fsl_dspi_driver);
MODULE_DESCRIPTION("Freescale DSPI Controller Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:" DRIVER_NAME);