linux_dsm_epyc7002/drivers/gpu/drm/i915/intel_hdmi.c

2487 lines
72 KiB
C
Raw Normal View History

/*
* Copyright 2006 Dave Airlie <airlied@linux.ie>
* Copyright © 2006-2009 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Authors:
* Eric Anholt <eric@anholt.net>
* Jesse Barnes <jesse.barnes@intel.com>
*/
#include <linux/i2c.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 15:04:11 +07:00
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/hdmi.h>
#include <drm/drmP.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc.h>
#include <drm/drm_edid.h>
#include <drm/drm_hdcp.h>
drm/i915: enable scrambling Geminilake platform sports a native HDMI 2.0 controller, and is capable of driving pixel-clocks upto 594Mhz. HDMI 2.0 spec mendates scrambling for these higher clocks, for reduced RF footprint. This patch checks if the monitor supports scrambling, and if required, enables it during the modeset. V2: Addressed review comments from Ville: - Do not track scrambling status in DRM layer, track somewhere in driver like in intel_crtc_state. - Don't talk to monitor at such a low layer, set monitor scrambling in intel_enable_ddi() before enabling the port. V3: Addressed review comments from Jani - In comments, function names, use "sink" instead of "monitor", so that the implementation could be close to the language of HDMI spec. V4: Addressed review comment from Maarten - scrambling -> hdmi_scrambling - high_tmds_clock_ratio -> hdmi_high_tmds_clock_ratio V5: Addressed review comments from Ville and Ander - Do not modifiy the crtc_state after compute_config. Move all scrambling and tmds_clock_ratio calcutations to compute_config. - While setting scrambling for source/sink, do not check the conditions again, just go by the crtc_state flags. This will simplyfy the condition checks. V6: Addressed review comments from Ville - Do not add IS_GLK check in disable/enable function, instead add it in compute_config, while setting state flags. - Remove unnecessary paranthesis. - Simplyfy handle_sink_scrambling function as suggested. - Add readout code for scrambling status in get_ddi_config and add a check for the same in pipe_config_compare. V7: Addressed review comments from Ander/Ville - No separate function for source scrambling, make it inline - Align the last line of the macro TRANS_DDI_HDMI_SCRAMBLING_MASK - Do not add platform check while setting source scrambling - Use pipe_config instead of crtc->config to set sink scrambling - To readout scrambling status, Compare with SCRAMBLING_MASK not any of its bits - Remove platform check in intel_pipe_config_compare while checking scrambling status V8: Fixed mege conflict, Addressed review comments from Ander - Remove the desciption/comment about scrambling fom the caller, move it to the function - Move the IS_GLK check into scrambling function - Fix alignment V9: Fixed review comments from Ville, Ander - Pass the scrambling state variables as bool input to the sink_scrambling function and let the disable call be unconditional. - Fix alignments in function calls and debug messages. - Add kernel doc for function intel_hdmi_handle_sink_scrambling V10: Rebase Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-6-git-send-email-shashank.sharma@intel.com
2017-03-13 18:24:03 +07:00
#include <drm/drm_scdc_helper.h>
#include "intel_drv.h"
#include <drm/i915_drm.h>
#include <drm/intel_lpe_audio.h>
#include "i915_drv.h"
static struct drm_device *intel_hdmi_to_dev(struct intel_hdmi *intel_hdmi)
{
return hdmi_to_dig_port(intel_hdmi)->base.base.dev;
}
static void
assert_hdmi_port_disabled(struct intel_hdmi *intel_hdmi)
{
struct drm_device *dev = intel_hdmi_to_dev(intel_hdmi);
struct drm_i915_private *dev_priv = to_i915(dev);
u32 enabled_bits;
enabled_bits = HAS_DDI(dev_priv) ? DDI_BUF_CTL_ENABLE : SDVO_ENABLE;
WARN(I915_READ(intel_hdmi->hdmi_reg) & enabled_bits,
"HDMI port enabled, expecting disabled\n");
}
static void
assert_hdmi_transcoder_func_disabled(struct drm_i915_private *dev_priv,
enum transcoder cpu_transcoder)
{
WARN(I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder)) &
TRANS_DDI_FUNC_ENABLE,
"HDMI transcoder function enabled, expecting disabled\n");
}
struct intel_hdmi *enc_to_intel_hdmi(struct drm_encoder *encoder)
{
struct intel_digital_port *intel_dig_port =
container_of(encoder, struct intel_digital_port, base.base);
return &intel_dig_port->hdmi;
}
static struct intel_hdmi *intel_attached_hdmi(struct drm_connector *connector)
{
return enc_to_intel_hdmi(&intel_attached_encoder(connector)->base);
}
static u32 g4x_infoframe_index(unsigned int type)
{
switch (type) {
case HDMI_INFOFRAME_TYPE_AVI:
return VIDEO_DIP_SELECT_AVI;
case HDMI_INFOFRAME_TYPE_SPD:
return VIDEO_DIP_SELECT_SPD;
case HDMI_INFOFRAME_TYPE_VENDOR:
return VIDEO_DIP_SELECT_VENDOR;
default:
2015-12-16 23:10:00 +07:00
MISSING_CASE(type);
return 0;
}
}
static u32 g4x_infoframe_enable(unsigned int type)
{
switch (type) {
case HDMI_INFOFRAME_TYPE_AVI:
return VIDEO_DIP_ENABLE_AVI;
case HDMI_INFOFRAME_TYPE_SPD:
return VIDEO_DIP_ENABLE_SPD;
case HDMI_INFOFRAME_TYPE_VENDOR:
return VIDEO_DIP_ENABLE_VENDOR;
default:
2015-12-16 23:10:00 +07:00
MISSING_CASE(type);
return 0;
}
}
static u32 hsw_infoframe_enable(unsigned int type)
{
switch (type) {
case DP_SDP_VSC:
return VIDEO_DIP_ENABLE_VSC_HSW;
case HDMI_INFOFRAME_TYPE_AVI:
return VIDEO_DIP_ENABLE_AVI_HSW;
case HDMI_INFOFRAME_TYPE_SPD:
return VIDEO_DIP_ENABLE_SPD_HSW;
case HDMI_INFOFRAME_TYPE_VENDOR:
return VIDEO_DIP_ENABLE_VS_HSW;
default:
2015-12-16 23:10:00 +07:00
MISSING_CASE(type);
return 0;
}
}
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 20:33:26 +07:00
static i915_reg_t
hsw_dip_data_reg(struct drm_i915_private *dev_priv,
enum transcoder cpu_transcoder,
unsigned int type,
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 20:33:26 +07:00
int i)
{
switch (type) {
case DP_SDP_VSC:
return HSW_TVIDEO_DIP_VSC_DATA(cpu_transcoder, i);
case HDMI_INFOFRAME_TYPE_AVI:
return HSW_TVIDEO_DIP_AVI_DATA(cpu_transcoder, i);
case HDMI_INFOFRAME_TYPE_SPD:
return HSW_TVIDEO_DIP_SPD_DATA(cpu_transcoder, i);
case HDMI_INFOFRAME_TYPE_VENDOR:
return HSW_TVIDEO_DIP_VS_DATA(cpu_transcoder, i);
default:
2015-12-16 23:10:00 +07:00
MISSING_CASE(type);
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 20:33:26 +07:00
return INVALID_MMIO_REG;
}
}
static void g4x_write_infoframe(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state,
unsigned int type,
const void *frame, ssize_t len)
{
const u32 *data = frame;
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
u32 val = I915_READ(VIDEO_DIP_CTL);
int i;
WARN(!(val & VIDEO_DIP_ENABLE), "Writing DIP with CTL reg disabled\n");
val &= ~(VIDEO_DIP_SELECT_MASK | 0xf); /* clear DIP data offset */
val |= g4x_infoframe_index(type);
val &= ~g4x_infoframe_enable(type);
I915_WRITE(VIDEO_DIP_CTL, val);
mmiowb();
for (i = 0; i < len; i += 4) {
I915_WRITE(VIDEO_DIP_DATA, *data);
data++;
}
drm/i915: make sure we write all the DIP data bytes ... even if the actual infoframe is smaller than the maximum possible size. If we don't write all the 32 DIP data bytes the InfoFrame ECC may not be correctly calculated in some cases (e.g., when changing the port), and this will lead to black screens on HDMI monitors. The ECC value is generated by the hardware. I don't see how this should break anything since we're writing 0 and that should be the correct value, so this patch should be safe. Notice that on IVB and older we actually have 64 bytes available for VIDEO_DIP_DATA, but only bytes 0-31 actually store infoframe data: the others are either read-only ECC values or marked as "reserved". On HSW we only have 32 bytes, and the ECC value is stored on its own separate read-only register. See BSpec. This patch fixes bug #46761, which is marked as a regression introduced by commit 4e89ee174bb2da341bf90a84321c7008a3c9210d: drm/i915: set the DIP port on ibx_write_infoframe Before commit 4e89 we were just failing to send AVI infoframes when we needed to change the port, which can lead to black screens in some cases. After commit 4e89 we started sending infoframes, but with a possibly wrong ECC value. After this patch I hope we start sending correct infoframes. Version 2: - Improve commit message - Try to make the code more clear Cc: stable@vger.kernel.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=46761 Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-25 23:23:34 +07:00
/* Write every possible data byte to force correct ECC calculation. */
for (; i < VIDEO_DIP_DATA_SIZE; i += 4)
I915_WRITE(VIDEO_DIP_DATA, 0);
mmiowb();
val |= g4x_infoframe_enable(type);
val &= ~VIDEO_DIP_FREQ_MASK;
val |= VIDEO_DIP_FREQ_VSYNC;
I915_WRITE(VIDEO_DIP_CTL, val);
POSTING_READ(VIDEO_DIP_CTL);
}
static bool g4x_infoframe_enabled(struct intel_encoder *encoder,
const struct intel_crtc_state *pipe_config)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
u32 val = I915_READ(VIDEO_DIP_CTL);
if ((val & VIDEO_DIP_ENABLE) == 0)
return false;
if ((val & VIDEO_DIP_PORT_MASK) != VIDEO_DIP_PORT(encoder->port))
return false;
return val & (VIDEO_DIP_ENABLE_AVI |
VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_SPD);
}
static void ibx_write_infoframe(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state,
unsigned int type,
const void *frame, ssize_t len)
{
const u32 *data = frame;
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 20:33:26 +07:00
i915_reg_t reg = TVIDEO_DIP_CTL(intel_crtc->pipe);
u32 val = I915_READ(reg);
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 20:33:26 +07:00
int i;
WARN(!(val & VIDEO_DIP_ENABLE), "Writing DIP with CTL reg disabled\n");
val &= ~(VIDEO_DIP_SELECT_MASK | 0xf); /* clear DIP data offset */
val |= g4x_infoframe_index(type);
val &= ~g4x_infoframe_enable(type);
I915_WRITE(reg, val);
mmiowb();
for (i = 0; i < len; i += 4) {
I915_WRITE(TVIDEO_DIP_DATA(intel_crtc->pipe), *data);
data++;
}
drm/i915: make sure we write all the DIP data bytes ... even if the actual infoframe is smaller than the maximum possible size. If we don't write all the 32 DIP data bytes the InfoFrame ECC may not be correctly calculated in some cases (e.g., when changing the port), and this will lead to black screens on HDMI monitors. The ECC value is generated by the hardware. I don't see how this should break anything since we're writing 0 and that should be the correct value, so this patch should be safe. Notice that on IVB and older we actually have 64 bytes available for VIDEO_DIP_DATA, but only bytes 0-31 actually store infoframe data: the others are either read-only ECC values or marked as "reserved". On HSW we only have 32 bytes, and the ECC value is stored on its own separate read-only register. See BSpec. This patch fixes bug #46761, which is marked as a regression introduced by commit 4e89ee174bb2da341bf90a84321c7008a3c9210d: drm/i915: set the DIP port on ibx_write_infoframe Before commit 4e89 we were just failing to send AVI infoframes when we needed to change the port, which can lead to black screens in some cases. After commit 4e89 we started sending infoframes, but with a possibly wrong ECC value. After this patch I hope we start sending correct infoframes. Version 2: - Improve commit message - Try to make the code more clear Cc: stable@vger.kernel.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=46761 Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-25 23:23:34 +07:00
/* Write every possible data byte to force correct ECC calculation. */
for (; i < VIDEO_DIP_DATA_SIZE; i += 4)
I915_WRITE(TVIDEO_DIP_DATA(intel_crtc->pipe), 0);
mmiowb();
val |= g4x_infoframe_enable(type);
val &= ~VIDEO_DIP_FREQ_MASK;
val |= VIDEO_DIP_FREQ_VSYNC;
I915_WRITE(reg, val);
POSTING_READ(reg);
}
static bool ibx_infoframe_enabled(struct intel_encoder *encoder,
const struct intel_crtc_state *pipe_config)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
enum pipe pipe = to_intel_crtc(pipe_config->base.crtc)->pipe;
i915_reg_t reg = TVIDEO_DIP_CTL(pipe);
u32 val = I915_READ(reg);
if ((val & VIDEO_DIP_ENABLE) == 0)
return false;
if ((val & VIDEO_DIP_PORT_MASK) != VIDEO_DIP_PORT(encoder->port))
return false;
return val & (VIDEO_DIP_ENABLE_AVI |
VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP);
}
static void cpt_write_infoframe(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state,
unsigned int type,
const void *frame, ssize_t len)
{
const u32 *data = frame;
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 20:33:26 +07:00
i915_reg_t reg = TVIDEO_DIP_CTL(intel_crtc->pipe);
u32 val = I915_READ(reg);
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 20:33:26 +07:00
int i;
WARN(!(val & VIDEO_DIP_ENABLE), "Writing DIP with CTL reg disabled\n");
val &= ~(VIDEO_DIP_SELECT_MASK | 0xf); /* clear DIP data offset */
val |= g4x_infoframe_index(type);
/* The DIP control register spec says that we need to update the AVI
* infoframe without clearing its enable bit */
if (type != HDMI_INFOFRAME_TYPE_AVI)
val &= ~g4x_infoframe_enable(type);
I915_WRITE(reg, val);
mmiowb();
for (i = 0; i < len; i += 4) {
I915_WRITE(TVIDEO_DIP_DATA(intel_crtc->pipe), *data);
data++;
}
drm/i915: make sure we write all the DIP data bytes ... even if the actual infoframe is smaller than the maximum possible size. If we don't write all the 32 DIP data bytes the InfoFrame ECC may not be correctly calculated in some cases (e.g., when changing the port), and this will lead to black screens on HDMI monitors. The ECC value is generated by the hardware. I don't see how this should break anything since we're writing 0 and that should be the correct value, so this patch should be safe. Notice that on IVB and older we actually have 64 bytes available for VIDEO_DIP_DATA, but only bytes 0-31 actually store infoframe data: the others are either read-only ECC values or marked as "reserved". On HSW we only have 32 bytes, and the ECC value is stored on its own separate read-only register. See BSpec. This patch fixes bug #46761, which is marked as a regression introduced by commit 4e89ee174bb2da341bf90a84321c7008a3c9210d: drm/i915: set the DIP port on ibx_write_infoframe Before commit 4e89 we were just failing to send AVI infoframes when we needed to change the port, which can lead to black screens in some cases. After commit 4e89 we started sending infoframes, but with a possibly wrong ECC value. After this patch I hope we start sending correct infoframes. Version 2: - Improve commit message - Try to make the code more clear Cc: stable@vger.kernel.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=46761 Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-25 23:23:34 +07:00
/* Write every possible data byte to force correct ECC calculation. */
for (; i < VIDEO_DIP_DATA_SIZE; i += 4)
I915_WRITE(TVIDEO_DIP_DATA(intel_crtc->pipe), 0);
mmiowb();
val |= g4x_infoframe_enable(type);
val &= ~VIDEO_DIP_FREQ_MASK;
val |= VIDEO_DIP_FREQ_VSYNC;
I915_WRITE(reg, val);
POSTING_READ(reg);
}
static bool cpt_infoframe_enabled(struct intel_encoder *encoder,
const struct intel_crtc_state *pipe_config)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
enum pipe pipe = to_intel_crtc(pipe_config->base.crtc)->pipe;
u32 val = I915_READ(TVIDEO_DIP_CTL(pipe));
if ((val & VIDEO_DIP_ENABLE) == 0)
return false;
return val & (VIDEO_DIP_ENABLE_AVI |
VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP);
}
static void vlv_write_infoframe(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state,
unsigned int type,
const void *frame, ssize_t len)
{
const u32 *data = frame;
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 20:33:26 +07:00
i915_reg_t reg = VLV_TVIDEO_DIP_CTL(intel_crtc->pipe);
u32 val = I915_READ(reg);
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 20:33:26 +07:00
int i;
WARN(!(val & VIDEO_DIP_ENABLE), "Writing DIP with CTL reg disabled\n");
val &= ~(VIDEO_DIP_SELECT_MASK | 0xf); /* clear DIP data offset */
val |= g4x_infoframe_index(type);
val &= ~g4x_infoframe_enable(type);
I915_WRITE(reg, val);
mmiowb();
for (i = 0; i < len; i += 4) {
I915_WRITE(VLV_TVIDEO_DIP_DATA(intel_crtc->pipe), *data);
data++;
}
drm/i915: make sure we write all the DIP data bytes ... even if the actual infoframe is smaller than the maximum possible size. If we don't write all the 32 DIP data bytes the InfoFrame ECC may not be correctly calculated in some cases (e.g., when changing the port), and this will lead to black screens on HDMI monitors. The ECC value is generated by the hardware. I don't see how this should break anything since we're writing 0 and that should be the correct value, so this patch should be safe. Notice that on IVB and older we actually have 64 bytes available for VIDEO_DIP_DATA, but only bytes 0-31 actually store infoframe data: the others are either read-only ECC values or marked as "reserved". On HSW we only have 32 bytes, and the ECC value is stored on its own separate read-only register. See BSpec. This patch fixes bug #46761, which is marked as a regression introduced by commit 4e89ee174bb2da341bf90a84321c7008a3c9210d: drm/i915: set the DIP port on ibx_write_infoframe Before commit 4e89 we were just failing to send AVI infoframes when we needed to change the port, which can lead to black screens in some cases. After commit 4e89 we started sending infoframes, but with a possibly wrong ECC value. After this patch I hope we start sending correct infoframes. Version 2: - Improve commit message - Try to make the code more clear Cc: stable@vger.kernel.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=46761 Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-25 23:23:34 +07:00
/* Write every possible data byte to force correct ECC calculation. */
for (; i < VIDEO_DIP_DATA_SIZE; i += 4)
I915_WRITE(VLV_TVIDEO_DIP_DATA(intel_crtc->pipe), 0);
mmiowb();
val |= g4x_infoframe_enable(type);
val &= ~VIDEO_DIP_FREQ_MASK;
val |= VIDEO_DIP_FREQ_VSYNC;
I915_WRITE(reg, val);
POSTING_READ(reg);
}
static bool vlv_infoframe_enabled(struct intel_encoder *encoder,
const struct intel_crtc_state *pipe_config)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
enum pipe pipe = to_intel_crtc(pipe_config->base.crtc)->pipe;
u32 val = I915_READ(VLV_TVIDEO_DIP_CTL(pipe));
if ((val & VIDEO_DIP_ENABLE) == 0)
return false;
if ((val & VIDEO_DIP_PORT_MASK) != VIDEO_DIP_PORT(encoder->port))
return false;
return val & (VIDEO_DIP_ENABLE_AVI |
VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP);
}
static void hsw_write_infoframe(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state,
unsigned int type,
const void *frame, ssize_t len)
{
const u32 *data = frame;
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 20:33:26 +07:00
i915_reg_t ctl_reg = HSW_TVIDEO_DIP_CTL(cpu_transcoder);
int data_size = type == DP_SDP_VSC ?
VIDEO_DIP_VSC_DATA_SIZE : VIDEO_DIP_DATA_SIZE;
int i;
u32 val = I915_READ(ctl_reg);
val &= ~hsw_infoframe_enable(type);
I915_WRITE(ctl_reg, val);
mmiowb();
for (i = 0; i < len; i += 4) {
I915_WRITE(hsw_dip_data_reg(dev_priv, cpu_transcoder,
type, i >> 2), *data);
data++;
}
drm/i915: make sure we write all the DIP data bytes ... even if the actual infoframe is smaller than the maximum possible size. If we don't write all the 32 DIP data bytes the InfoFrame ECC may not be correctly calculated in some cases (e.g., when changing the port), and this will lead to black screens on HDMI monitors. The ECC value is generated by the hardware. I don't see how this should break anything since we're writing 0 and that should be the correct value, so this patch should be safe. Notice that on IVB and older we actually have 64 bytes available for VIDEO_DIP_DATA, but only bytes 0-31 actually store infoframe data: the others are either read-only ECC values or marked as "reserved". On HSW we only have 32 bytes, and the ECC value is stored on its own separate read-only register. See BSpec. This patch fixes bug #46761, which is marked as a regression introduced by commit 4e89ee174bb2da341bf90a84321c7008a3c9210d: drm/i915: set the DIP port on ibx_write_infoframe Before commit 4e89 we were just failing to send AVI infoframes when we needed to change the port, which can lead to black screens in some cases. After commit 4e89 we started sending infoframes, but with a possibly wrong ECC value. After this patch I hope we start sending correct infoframes. Version 2: - Improve commit message - Try to make the code more clear Cc: stable@vger.kernel.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=46761 Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-25 23:23:34 +07:00
/* Write every possible data byte to force correct ECC calculation. */
for (; i < data_size; i += 4)
I915_WRITE(hsw_dip_data_reg(dev_priv, cpu_transcoder,
type, i >> 2), 0);
mmiowb();
val |= hsw_infoframe_enable(type);
I915_WRITE(ctl_reg, val);
POSTING_READ(ctl_reg);
}
static bool hsw_infoframe_enabled(struct intel_encoder *encoder,
const struct intel_crtc_state *pipe_config)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
u32 val = I915_READ(HSW_TVIDEO_DIP_CTL(pipe_config->cpu_transcoder));
return val & (VIDEO_DIP_ENABLE_VSC_HSW | VIDEO_DIP_ENABLE_AVI_HSW |
VIDEO_DIP_ENABLE_GCP_HSW | VIDEO_DIP_ENABLE_VS_HSW |
VIDEO_DIP_ENABLE_GMP_HSW | VIDEO_DIP_ENABLE_SPD_HSW);
}
/*
* The data we write to the DIP data buffer registers is 1 byte bigger than the
* HDMI infoframe size because of an ECC/reserved byte at position 3 (starting
* at 0). It's also a byte used by DisplayPort so the same DIP registers can be
* used for both technologies.
*
* DW0: Reserved/ECC/DP | HB2 | HB1 | HB0
* DW1: DB3 | DB2 | DB1 | DB0
* DW2: DB7 | DB6 | DB5 | DB4
* DW3: ...
*
* (HB is Header Byte, DB is Data Byte)
*
* The hdmi pack() functions don't know about that hardware specific hole so we
* trick them by giving an offset into the buffer and moving back the header
* bytes by one.
*/
static void intel_write_infoframe(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state,
union hdmi_infoframe *frame)
{
struct intel_digital_port *intel_dig_port = enc_to_dig_port(&encoder->base);
u8 buffer[VIDEO_DIP_DATA_SIZE];
ssize_t len;
/* see comment above for the reason for this offset */
len = hdmi_infoframe_pack(frame, buffer + 1, sizeof(buffer) - 1);
if (len < 0)
return;
/* Insert the 'hole' (see big comment above) at position 3 */
memmove(&buffer[0], &buffer[1], 3);
buffer[3] = 0;
len++;
intel_dig_port->write_infoframe(encoder,
crtc_state,
frame->any.type, buffer, len);
}
static void intel_hdmi_set_avi_infoframe(struct intel_encoder *encoder,
i915: content-type property for HDMI connector Added encoding of drm content_type property from drm_connector_state within AVI infoframe in order to properly handle external HDMI TV content-type setting. This requires also manipulationg ITC bit, as stated in HDMI spec. v2: * Moved helper function which attaches content type property to the drm core, as was suggested. Removed redundant connector state initialization. v3: * Removed caps in drm_content_type_enum_list. After some discussion it turned out that HDMI Spec 1.4 was wrongly assuming that IT Content(itc) bit doesn't affect Content type states, however itc bit needs to be manupulated as well. In order to not expose additional property for itc, for sake of simplicity it was decided to bind those together in same "content type" property. v4: * Added it_content checking in intel_digital_connector_atomic_check. Fixed documentation for new content type enum. v5: * Moved patch revision's description to commit messages. v6: * Minor naming fix for the content type enumeration string. v7: * Fix parameter name for documentation and parameter alignment in order not to get warning. Added Content Type description to new HDMI connector properties section. v8: * Thrown away unneeded numbers from HDMI content-type property description. Switch to strings desription instead of plain definitions. v9: * Moved away hdmi specific content-type enum from drm_connector_state. Content type property should probably not be bound to any specific connector interface in drm_connector_state. Same probably should be done to hdmi_picture_aspect_ration enum which is also contained in drm_connector_state. Added special helper function to get derive hdmi specific relevant infoframe fields. v10: * Added usage description to HDMI properties kernel doc. v11: * Created centralized function for filling HDMI AVI infoframe, based on correspondent DRM property value. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180515135928.31092-3-stanislav.lisovskiy@intel.com [vsyrjala: clean up checkpatch multiple blank lines warnings] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2018-05-15 20:59:28 +07:00
const struct intel_crtc_state *crtc_state,
const struct drm_connector_state *conn_state)
{
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
const struct drm_display_mode *adjusted_mode =
&crtc_state->base.adjusted_mode;
drm: handle HDMI 2.0 VICs in AVI info-frames HDMI 1.4b support the CEA video modes as per range of CEA-861-D (VIC 1-64). For any other mode, the VIC filed in AVI infoframes should be 0. HDMI 2.0 sinks, support video modes range as per CEA-861-F spec, which is extended to (VIC 1-107). This patch adds a bool input variable, which indicates if the connected sink is a HDMI 2.0 sink or not. This will make sure that we don't pass a HDMI 2.0 VIC to a HDMI 1.4 sink. This patch touches all drm drivers, who are callers of this function drm_hdmi_avi_infoframe_from_display_mode but to make sure there is no change in current behavior, is_hdmi2 is kept as false. In case of I915 driver, this patch: - checks if the connected display is HDMI 2.0. - HDMI infoframes carry one of this two type of information: - VIC for 4K modes for HDMI 1.4 sinks - S3D information for S3D modes As CEA-861-F has already defined VICs for 4K videomodes, this patch doesn't allow sending HDMI infoframes for HDMI 2.0 sinks, until the mode is 3D. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Jose Abreu <jose.abreu@synopsys.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Daniel Vetter <daniel.vetter@intel.com> PS: This patch touches a few lines in few files, which were already above 80 char, so checkpatch gives 80 char warning again. - gpu/drm/omapdrm/omap_encoder.c - gpu/drm/i915/intel_sdvo.c V2: Rebase, Added r-b from Andrzej V3: Addressed review comment from Ville: - Do not send VICs in both AVI-IF and HDMI-IF send only one of it. V4: Rebase V5: Added r-b from Neil. Addressed review comments from Ville - Do not block HDMI vendor IF, instead check for VIC while handling AVI infoframes V6: Rebase V7: Rebase Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-2-git-send-email-shashank.sharma@intel.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2017-07-13 22:33:07 +07:00
struct drm_connector *connector = &intel_hdmi->attached_connector->base;
bool is_hdmi2_sink = connector->display_info.hdmi.scdc.supported;
union hdmi_infoframe frame;
int ret;
ret = drm_hdmi_avi_infoframe_from_display_mode(&frame.avi,
drm: handle HDMI 2.0 VICs in AVI info-frames HDMI 1.4b support the CEA video modes as per range of CEA-861-D (VIC 1-64). For any other mode, the VIC filed in AVI infoframes should be 0. HDMI 2.0 sinks, support video modes range as per CEA-861-F spec, which is extended to (VIC 1-107). This patch adds a bool input variable, which indicates if the connected sink is a HDMI 2.0 sink or not. This will make sure that we don't pass a HDMI 2.0 VIC to a HDMI 1.4 sink. This patch touches all drm drivers, who are callers of this function drm_hdmi_avi_infoframe_from_display_mode but to make sure there is no change in current behavior, is_hdmi2 is kept as false. In case of I915 driver, this patch: - checks if the connected display is HDMI 2.0. - HDMI infoframes carry one of this two type of information: - VIC for 4K modes for HDMI 1.4 sinks - S3D information for S3D modes As CEA-861-F has already defined VICs for 4K videomodes, this patch doesn't allow sending HDMI infoframes for HDMI 2.0 sinks, until the mode is 3D. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Jose Abreu <jose.abreu@synopsys.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Daniel Vetter <daniel.vetter@intel.com> PS: This patch touches a few lines in few files, which were already above 80 char, so checkpatch gives 80 char warning again. - gpu/drm/omapdrm/omap_encoder.c - gpu/drm/i915/intel_sdvo.c V2: Rebase, Added r-b from Andrzej V3: Addressed review comment from Ville: - Do not send VICs in both AVI-IF and HDMI-IF send only one of it. V4: Rebase V5: Added r-b from Neil. Addressed review comments from Ville - Do not block HDMI vendor IF, instead check for VIC while handling AVI infoframes V6: Rebase V7: Rebase Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-2-git-send-email-shashank.sharma@intel.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2017-07-13 22:33:07 +07:00
adjusted_mode,
is_hdmi2_sink);
if (ret < 0) {
DRM_ERROR("couldn't fill AVI infoframe\n");
return;
}
drm/i915: Add CRTC output format YCBCR 4:2:0 Currently, we are using a bool in CRTC state (state->ycbcr420), to indicate modeset, that the output format is YCBCR 4:2:0. Now in order to support other YCBCR formats, we will need more such flags. This patch adds a new enum parameter for YCBCR 4:2:0 outputs, in the CRTC output formats and then plugs it during the modeset. V3: Added this patch in the series, to address review comments from second patchset. V4: Added r-b from Maarten (on v3) Addressed review comments from Ville: - Change the enum name to intel_output_format. - Start the enum value (INVALID) from 0 instaed of 1. - Set the crtc's output_format to RGB in encoder's compute_config. V5: Broke previous patch 1 into two parts, - first patch to add CRTC output format in general - second patch (this one) to add YCBCR 4:2:0 output format specifically. - Use ARRAY_SIZE(format_str) for output format validity check (Ville) V6: Added a separate function to calculate crtc_state->output_format, and calling it from various get_config function (Fix CI build warning) V7: Fixed checkpatch warnings for alignment V8: Rebase V9: Rebase V10: Rebase V11: Addressed review comments from Ville: - Change check for CRTC output format from > ARRAY_SIZE to >= ARRAY_SIZE. - Check for values < INTEL_OUTPUT_FORMAT_RGB is unnecessary. - No need to get CRTC YCBCR config, for pre-BDW functions. Added Ville's r-b. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1539325394-20788-2-git-send-email-shashank.sharma@intel.com
2018-10-12 13:23:08 +07:00
if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420)
frame.avi.colorspace = HDMI_COLORSPACE_YUV420;
else if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444)
frame.avi.colorspace = HDMI_COLORSPACE_YUV444;
else
frame.avi.colorspace = HDMI_COLORSPACE_RGB;
drm_hdmi_avi_infoframe_quant_range(&frame.avi, adjusted_mode,
crtc_state->limited_color_range ?
HDMI_QUANTIZATION_RANGE_LIMITED :
HDMI_QUANTIZATION_RANGE_FULL,
drm/edid: Don't send non-zero YQ in AVI infoframe for HDMI 1.x sinks Apparently some sinks look at the YQ bits even when receiving RGB, and they get somehow confused when they see a non-zero YQ value. So we can't just blindly follow CEA-861-F and set YQ to match the RGB range. Unfortunately there is no good way to tell whether the sink designer claims to have read CEA-861-F. The CEA extension block revision number has generally been stuck at 3 since forever, and even a very recently manufactured sink might be based on an old design so the manufacturing date doesn't seem like something we can use. In lieu of better information let's follow CEA-861-F only for HDMI 2.0 sinks, since HDMI 2.0 is based on CEA-861-F. For HDMI 1.x sinks we'll always set YQ=0. The alternative would of course be to always set YQ=0. And if we ever encounter a HDMI 2.0+ sink with this bug that's what we'll probably have to do. Cc: stable@vger.kernel.org Cc: Jani Nikula <jani.nikula@intel.com> Cc: Eric Anholt <eric@anholt.net> Cc: Neil Kownacki <njkkow@gmail.com> Reported-by: Neil Kownacki <njkkow@gmail.com> Tested-by: Neil Kownacki <njkkow@gmail.com> Fixes: fcc8a22cc905 ("drm/edid: Set YQ bits in the AVI infoframe according to CEA-861-F") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101639 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171108152504.12596-1-ville.syrjala@linux.intel.com Acked-by: Eric Anholt <eric@anholt.net>
2017-11-08 22:25:04 +07:00
intel_hdmi->rgb_quant_range_selectable,
is_hdmi2_sink);
i915: content-type property for HDMI connector Added encoding of drm content_type property from drm_connector_state within AVI infoframe in order to properly handle external HDMI TV content-type setting. This requires also manipulationg ITC bit, as stated in HDMI spec. v2: * Moved helper function which attaches content type property to the drm core, as was suggested. Removed redundant connector state initialization. v3: * Removed caps in drm_content_type_enum_list. After some discussion it turned out that HDMI Spec 1.4 was wrongly assuming that IT Content(itc) bit doesn't affect Content type states, however itc bit needs to be manupulated as well. In order to not expose additional property for itc, for sake of simplicity it was decided to bind those together in same "content type" property. v4: * Added it_content checking in intel_digital_connector_atomic_check. Fixed documentation for new content type enum. v5: * Moved patch revision's description to commit messages. v6: * Minor naming fix for the content type enumeration string. v7: * Fix parameter name for documentation and parameter alignment in order not to get warning. Added Content Type description to new HDMI connector properties section. v8: * Thrown away unneeded numbers from HDMI content-type property description. Switch to strings desription instead of plain definitions. v9: * Moved away hdmi specific content-type enum from drm_connector_state. Content type property should probably not be bound to any specific connector interface in drm_connector_state. Same probably should be done to hdmi_picture_aspect_ration enum which is also contained in drm_connector_state. Added special helper function to get derive hdmi specific relevant infoframe fields. v10: * Added usage description to HDMI properties kernel doc. v11: * Created centralized function for filling HDMI AVI infoframe, based on correspondent DRM property value. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180515135928.31092-3-stanislav.lisovskiy@intel.com [vsyrjala: clean up checkpatch multiple blank lines warnings] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2018-05-15 20:59:28 +07:00
drm_hdmi_avi_infoframe_content_type(&frame.avi,
conn_state);
/* TODO: handle pixel repetition for YCBCR420 outputs */
intel_write_infoframe(encoder, crtc_state,
&frame);
}
static void intel_hdmi_set_spd_infoframe(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state)
{
union hdmi_infoframe frame;
int ret;
ret = hdmi_spd_infoframe_init(&frame.spd, "Intel", "Integrated gfx");
if (ret < 0) {
DRM_ERROR("couldn't fill SPD infoframe\n");
return;
}
frame.spd.sdi = HDMI_SPD_SDI_PC;
intel_write_infoframe(encoder, crtc_state,
&frame);
}
static void
intel_hdmi_set_hdmi_infoframe(struct intel_encoder *encoder,
2017-11-14 00:04:19 +07:00
const struct intel_crtc_state *crtc_state,
const struct drm_connector_state *conn_state)
{
union hdmi_infoframe frame;
int ret;
ret = drm_hdmi_vendor_infoframe_from_display_mode(&frame.vendor.hdmi,
2017-11-14 00:04:19 +07:00
conn_state->connector,
&crtc_state->base.adjusted_mode);
if (ret < 0)
return;
intel_write_infoframe(encoder, crtc_state,
&frame);
}
static void g4x_set_infoframes(struct intel_encoder *encoder,
bool enable,
const struct intel_crtc_state *crtc_state,
const struct drm_connector_state *conn_state)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_digital_port *intel_dig_port = enc_to_dig_port(&encoder->base);
struct intel_hdmi *intel_hdmi = &intel_dig_port->hdmi;
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 20:33:26 +07:00
i915_reg_t reg = VIDEO_DIP_CTL;
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
u32 val = I915_READ(reg);
u32 port = VIDEO_DIP_PORT(encoder->port);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
assert_hdmi_port_disabled(intel_hdmi);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
/* If the registers were not initialized yet, they might be zeroes,
* which means we're selecting the AVI DIP and we're setting its
* frequency to once. This seems to really confuse the HW and make
* things stop working (the register spec says the AVI always needs to
* be sent every VSync). So here we avoid writing to the register more
* than we need and also explicitly select the AVI DIP and explicitly
* set its frequency to every VSync. Avoiding to write it twice seems to
* be enough to solve the problem, but being defensive shouldn't hurt us
* either. */
val |= VIDEO_DIP_SELECT_AVI | VIDEO_DIP_FREQ_VSYNC;
if (!enable) {
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
if (!(val & VIDEO_DIP_ENABLE))
return;
if (port != (val & VIDEO_DIP_PORT_MASK)) {
DRM_DEBUG_KMS("video DIP still enabled on port %c\n",
(val & VIDEO_DIP_PORT_MASK) >> 29);
return;
}
val &= ~(VIDEO_DIP_ENABLE | VIDEO_DIP_ENABLE_AVI |
VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_SPD);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
I915_WRITE(reg, val);
POSTING_READ(reg);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
return;
}
if (port != (val & VIDEO_DIP_PORT_MASK)) {
if (val & VIDEO_DIP_ENABLE) {
DRM_DEBUG_KMS("video DIP already enabled on port %c\n",
(val & VIDEO_DIP_PORT_MASK) >> 29);
return;
}
val &= ~VIDEO_DIP_PORT_MASK;
val |= port;
}
val |= VIDEO_DIP_ENABLE;
val &= ~(VIDEO_DIP_ENABLE_AVI |
VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_SPD);
I915_WRITE(reg, val);
POSTING_READ(reg);
i915: content-type property for HDMI connector Added encoding of drm content_type property from drm_connector_state within AVI infoframe in order to properly handle external HDMI TV content-type setting. This requires also manipulationg ITC bit, as stated in HDMI spec. v2: * Moved helper function which attaches content type property to the drm core, as was suggested. Removed redundant connector state initialization. v3: * Removed caps in drm_content_type_enum_list. After some discussion it turned out that HDMI Spec 1.4 was wrongly assuming that IT Content(itc) bit doesn't affect Content type states, however itc bit needs to be manupulated as well. In order to not expose additional property for itc, for sake of simplicity it was decided to bind those together in same "content type" property. v4: * Added it_content checking in intel_digital_connector_atomic_check. Fixed documentation for new content type enum. v5: * Moved patch revision's description to commit messages. v6: * Minor naming fix for the content type enumeration string. v7: * Fix parameter name for documentation and parameter alignment in order not to get warning. Added Content Type description to new HDMI connector properties section. v8: * Thrown away unneeded numbers from HDMI content-type property description. Switch to strings desription instead of plain definitions. v9: * Moved away hdmi specific content-type enum from drm_connector_state. Content type property should probably not be bound to any specific connector interface in drm_connector_state. Same probably should be done to hdmi_picture_aspect_ration enum which is also contained in drm_connector_state. Added special helper function to get derive hdmi specific relevant infoframe fields. v10: * Added usage description to HDMI properties kernel doc. v11: * Created centralized function for filling HDMI AVI infoframe, based on correspondent DRM property value. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180515135928.31092-3-stanislav.lisovskiy@intel.com [vsyrjala: clean up checkpatch multiple blank lines warnings] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2018-05-15 20:59:28 +07:00
intel_hdmi_set_avi_infoframe(encoder, crtc_state, conn_state);
intel_hdmi_set_spd_infoframe(encoder, crtc_state);
2017-11-14 00:04:19 +07:00
intel_hdmi_set_hdmi_infoframe(encoder, crtc_state, conn_state);
}
static bool hdmi_sink_is_deep_color(const struct drm_connector_state *conn_state)
{
struct drm_connector *connector = conn_state->connector;
/*
* HDMI cloning is only supported on g4x which doesn't
* support deep color or GCP infoframes anyway so no
* need to worry about multiple HDMI sinks here.
*/
return connector->display_info.bpc > 8;
}
/*
* Determine if default_phase=1 can be indicated in the GCP infoframe.
*
* From HDMI specification 1.4a:
* - The first pixel of each Video Data Period shall always have a pixel packing phase of 0
* - The first pixel following each Video Data Period shall have a pixel packing phase of 0
* - The PP bits shall be constant for all GCPs and will be equal to the last packing phase
* - The first pixel following every transition of HSYNC or VSYNC shall have a pixel packing
* phase of 0
*/
static bool gcp_default_phase_possible(int pipe_bpp,
const struct drm_display_mode *mode)
{
unsigned int pixels_per_group;
switch (pipe_bpp) {
case 30:
/* 4 pixels in 5 clocks */
pixels_per_group = 4;
break;
case 36:
/* 2 pixels in 3 clocks */
pixels_per_group = 2;
break;
case 48:
/* 1 pixel in 2 clocks */
pixels_per_group = 1;
break;
default:
/* phase information not relevant for 8bpc */
return false;
}
return mode->crtc_hdisplay % pixels_per_group == 0 &&
mode->crtc_htotal % pixels_per_group == 0 &&
mode->crtc_hblank_start % pixels_per_group == 0 &&
mode->crtc_hblank_end % pixels_per_group == 0 &&
mode->crtc_hsync_start % pixels_per_group == 0 &&
mode->crtc_hsync_end % pixels_per_group == 0 &&
((mode->flags & DRM_MODE_FLAG_INTERLACE) == 0 ||
mode->crtc_htotal/2 % pixels_per_group == 0);
}
static bool intel_hdmi_set_gcp_infoframe(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state,
const struct drm_connector_state *conn_state)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 20:33:26 +07:00
i915_reg_t reg;
u32 val = 0;
if (HAS_DDI(dev_priv))
reg = HSW_TVIDEO_DIP_GCP(crtc_state->cpu_transcoder);
else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
reg = VLV_TVIDEO_DIP_GCP(crtc->pipe);
else if (HAS_PCH_SPLIT(dev_priv))
reg = TVIDEO_DIP_GCP(crtc->pipe);
else
return false;
/* Indicate color depth whenever the sink supports deep color */
if (hdmi_sink_is_deep_color(conn_state))
val |= GCP_COLOR_INDICATION;
/* Enable default_phase whenever the display mode is suitably aligned */
if (gcp_default_phase_possible(crtc_state->pipe_bpp,
&crtc_state->base.adjusted_mode))
val |= GCP_DEFAULT_PHASE_ENABLE;
I915_WRITE(reg, val);
return val != 0;
}
static void ibx_set_infoframes(struct intel_encoder *encoder,
bool enable,
const struct intel_crtc_state *crtc_state,
const struct drm_connector_state *conn_state)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
struct intel_digital_port *intel_dig_port = enc_to_dig_port(&encoder->base);
struct intel_hdmi *intel_hdmi = &intel_dig_port->hdmi;
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 20:33:26 +07:00
i915_reg_t reg = TVIDEO_DIP_CTL(intel_crtc->pipe);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
u32 val = I915_READ(reg);
u32 port = VIDEO_DIP_PORT(encoder->port);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
assert_hdmi_port_disabled(intel_hdmi);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
/* See the big comment in g4x_set_infoframes() */
val |= VIDEO_DIP_SELECT_AVI | VIDEO_DIP_FREQ_VSYNC;
if (!enable) {
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
if (!(val & VIDEO_DIP_ENABLE))
return;
val &= ~(VIDEO_DIP_ENABLE | VIDEO_DIP_ENABLE_AVI |
VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
I915_WRITE(reg, val);
POSTING_READ(reg);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
return;
}
if (port != (val & VIDEO_DIP_PORT_MASK)) {
WARN(val & VIDEO_DIP_ENABLE,
"DIP already enabled on port %c\n",
(val & VIDEO_DIP_PORT_MASK) >> 29);
val &= ~VIDEO_DIP_PORT_MASK;
val |= port;
}
val |= VIDEO_DIP_ENABLE;
val &= ~(VIDEO_DIP_ENABLE_AVI |
VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP);
if (intel_hdmi_set_gcp_infoframe(encoder, crtc_state, conn_state))
val |= VIDEO_DIP_ENABLE_GCP;
I915_WRITE(reg, val);
POSTING_READ(reg);
i915: content-type property for HDMI connector Added encoding of drm content_type property from drm_connector_state within AVI infoframe in order to properly handle external HDMI TV content-type setting. This requires also manipulationg ITC bit, as stated in HDMI spec. v2: * Moved helper function which attaches content type property to the drm core, as was suggested. Removed redundant connector state initialization. v3: * Removed caps in drm_content_type_enum_list. After some discussion it turned out that HDMI Spec 1.4 was wrongly assuming that IT Content(itc) bit doesn't affect Content type states, however itc bit needs to be manupulated as well. In order to not expose additional property for itc, for sake of simplicity it was decided to bind those together in same "content type" property. v4: * Added it_content checking in intel_digital_connector_atomic_check. Fixed documentation for new content type enum. v5: * Moved patch revision's description to commit messages. v6: * Minor naming fix for the content type enumeration string. v7: * Fix parameter name for documentation and parameter alignment in order not to get warning. Added Content Type description to new HDMI connector properties section. v8: * Thrown away unneeded numbers from HDMI content-type property description. Switch to strings desription instead of plain definitions. v9: * Moved away hdmi specific content-type enum from drm_connector_state. Content type property should probably not be bound to any specific connector interface in drm_connector_state. Same probably should be done to hdmi_picture_aspect_ration enum which is also contained in drm_connector_state. Added special helper function to get derive hdmi specific relevant infoframe fields. v10: * Added usage description to HDMI properties kernel doc. v11: * Created centralized function for filling HDMI AVI infoframe, based on correspondent DRM property value. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180515135928.31092-3-stanislav.lisovskiy@intel.com [vsyrjala: clean up checkpatch multiple blank lines warnings] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2018-05-15 20:59:28 +07:00
intel_hdmi_set_avi_infoframe(encoder, crtc_state, conn_state);
intel_hdmi_set_spd_infoframe(encoder, crtc_state);
2017-11-14 00:04:19 +07:00
intel_hdmi_set_hdmi_infoframe(encoder, crtc_state, conn_state);
}
static void cpt_set_infoframes(struct intel_encoder *encoder,
bool enable,
const struct intel_crtc_state *crtc_state,
const struct drm_connector_state *conn_state)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 20:33:26 +07:00
i915_reg_t reg = TVIDEO_DIP_CTL(intel_crtc->pipe);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
u32 val = I915_READ(reg);
assert_hdmi_port_disabled(intel_hdmi);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
/* See the big comment in g4x_set_infoframes() */
val |= VIDEO_DIP_SELECT_AVI | VIDEO_DIP_FREQ_VSYNC;
if (!enable) {
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
if (!(val & VIDEO_DIP_ENABLE))
return;
val &= ~(VIDEO_DIP_ENABLE | VIDEO_DIP_ENABLE_AVI |
VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
I915_WRITE(reg, val);
POSTING_READ(reg);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
return;
}
/* Set both together, unset both together: see the spec. */
val |= VIDEO_DIP_ENABLE | VIDEO_DIP_ENABLE_AVI;
val &= ~(VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP);
if (intel_hdmi_set_gcp_infoframe(encoder, crtc_state, conn_state))
val |= VIDEO_DIP_ENABLE_GCP;
I915_WRITE(reg, val);
POSTING_READ(reg);
i915: content-type property for HDMI connector Added encoding of drm content_type property from drm_connector_state within AVI infoframe in order to properly handle external HDMI TV content-type setting. This requires also manipulationg ITC bit, as stated in HDMI spec. v2: * Moved helper function which attaches content type property to the drm core, as was suggested. Removed redundant connector state initialization. v3: * Removed caps in drm_content_type_enum_list. After some discussion it turned out that HDMI Spec 1.4 was wrongly assuming that IT Content(itc) bit doesn't affect Content type states, however itc bit needs to be manupulated as well. In order to not expose additional property for itc, for sake of simplicity it was decided to bind those together in same "content type" property. v4: * Added it_content checking in intel_digital_connector_atomic_check. Fixed documentation for new content type enum. v5: * Moved patch revision's description to commit messages. v6: * Minor naming fix for the content type enumeration string. v7: * Fix parameter name for documentation and parameter alignment in order not to get warning. Added Content Type description to new HDMI connector properties section. v8: * Thrown away unneeded numbers from HDMI content-type property description. Switch to strings desription instead of plain definitions. v9: * Moved away hdmi specific content-type enum from drm_connector_state. Content type property should probably not be bound to any specific connector interface in drm_connector_state. Same probably should be done to hdmi_picture_aspect_ration enum which is also contained in drm_connector_state. Added special helper function to get derive hdmi specific relevant infoframe fields. v10: * Added usage description to HDMI properties kernel doc. v11: * Created centralized function for filling HDMI AVI infoframe, based on correspondent DRM property value. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180515135928.31092-3-stanislav.lisovskiy@intel.com [vsyrjala: clean up checkpatch multiple blank lines warnings] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2018-05-15 20:59:28 +07:00
intel_hdmi_set_avi_infoframe(encoder, crtc_state, conn_state);
intel_hdmi_set_spd_infoframe(encoder, crtc_state);
2017-11-14 00:04:19 +07:00
intel_hdmi_set_hdmi_infoframe(encoder, crtc_state, conn_state);
}
static void vlv_set_infoframes(struct intel_encoder *encoder,
bool enable,
const struct intel_crtc_state *crtc_state,
const struct drm_connector_state *conn_state)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 20:33:26 +07:00
i915_reg_t reg = VLV_TVIDEO_DIP_CTL(intel_crtc->pipe);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
u32 val = I915_READ(reg);
u32 port = VIDEO_DIP_PORT(encoder->port);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
assert_hdmi_port_disabled(intel_hdmi);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
/* See the big comment in g4x_set_infoframes() */
val |= VIDEO_DIP_SELECT_AVI | VIDEO_DIP_FREQ_VSYNC;
if (!enable) {
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
if (!(val & VIDEO_DIP_ENABLE))
return;
val &= ~(VIDEO_DIP_ENABLE | VIDEO_DIP_ENABLE_AVI |
VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
I915_WRITE(reg, val);
POSTING_READ(reg);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
return;
}
if (port != (val & VIDEO_DIP_PORT_MASK)) {
WARN(val & VIDEO_DIP_ENABLE,
"DIP already enabled on port %c\n",
(val & VIDEO_DIP_PORT_MASK) >> 29);
val &= ~VIDEO_DIP_PORT_MASK;
val |= port;
}
val |= VIDEO_DIP_ENABLE;
val &= ~(VIDEO_DIP_ENABLE_AVI |
VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
VIDEO_DIP_ENABLE_SPD | VIDEO_DIP_ENABLE_GCP);
if (intel_hdmi_set_gcp_infoframe(encoder, crtc_state, conn_state))
val |= VIDEO_DIP_ENABLE_GCP;
I915_WRITE(reg, val);
POSTING_READ(reg);
i915: content-type property for HDMI connector Added encoding of drm content_type property from drm_connector_state within AVI infoframe in order to properly handle external HDMI TV content-type setting. This requires also manipulationg ITC bit, as stated in HDMI spec. v2: * Moved helper function which attaches content type property to the drm core, as was suggested. Removed redundant connector state initialization. v3: * Removed caps in drm_content_type_enum_list. After some discussion it turned out that HDMI Spec 1.4 was wrongly assuming that IT Content(itc) bit doesn't affect Content type states, however itc bit needs to be manupulated as well. In order to not expose additional property for itc, for sake of simplicity it was decided to bind those together in same "content type" property. v4: * Added it_content checking in intel_digital_connector_atomic_check. Fixed documentation for new content type enum. v5: * Moved patch revision's description to commit messages. v6: * Minor naming fix for the content type enumeration string. v7: * Fix parameter name for documentation and parameter alignment in order not to get warning. Added Content Type description to new HDMI connector properties section. v8: * Thrown away unneeded numbers from HDMI content-type property description. Switch to strings desription instead of plain definitions. v9: * Moved away hdmi specific content-type enum from drm_connector_state. Content type property should probably not be bound to any specific connector interface in drm_connector_state. Same probably should be done to hdmi_picture_aspect_ration enum which is also contained in drm_connector_state. Added special helper function to get derive hdmi specific relevant infoframe fields. v10: * Added usage description to HDMI properties kernel doc. v11: * Created centralized function for filling HDMI AVI infoframe, based on correspondent DRM property value. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180515135928.31092-3-stanislav.lisovskiy@intel.com [vsyrjala: clean up checkpatch multiple blank lines warnings] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2018-05-15 20:59:28 +07:00
intel_hdmi_set_avi_infoframe(encoder, crtc_state, conn_state);
intel_hdmi_set_spd_infoframe(encoder, crtc_state);
2017-11-14 00:04:19 +07:00
intel_hdmi_set_hdmi_infoframe(encoder, crtc_state, conn_state);
}
static void hsw_set_infoframes(struct intel_encoder *encoder,
bool enable,
const struct intel_crtc_state *crtc_state,
const struct drm_connector_state *conn_state)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
i915_reg_t reg = HSW_TVIDEO_DIP_CTL(crtc_state->cpu_transcoder);
u32 val = I915_READ(reg);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
assert_hdmi_transcoder_func_disabled(dev_priv,
crtc_state->cpu_transcoder);
val &= ~(VIDEO_DIP_ENABLE_VSC_HSW | VIDEO_DIP_ENABLE_AVI_HSW |
VIDEO_DIP_ENABLE_GCP_HSW | VIDEO_DIP_ENABLE_VS_HSW |
VIDEO_DIP_ENABLE_GMP_HSW | VIDEO_DIP_ENABLE_SPD_HSW);
if (!enable) {
I915_WRITE(reg, val);
POSTING_READ(reg);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
return;
}
if (intel_hdmi_set_gcp_infoframe(encoder, crtc_state, conn_state))
val |= VIDEO_DIP_ENABLE_GCP_HSW;
I915_WRITE(reg, val);
POSTING_READ(reg);
i915: content-type property for HDMI connector Added encoding of drm content_type property from drm_connector_state within AVI infoframe in order to properly handle external HDMI TV content-type setting. This requires also manipulationg ITC bit, as stated in HDMI spec. v2: * Moved helper function which attaches content type property to the drm core, as was suggested. Removed redundant connector state initialization. v3: * Removed caps in drm_content_type_enum_list. After some discussion it turned out that HDMI Spec 1.4 was wrongly assuming that IT Content(itc) bit doesn't affect Content type states, however itc bit needs to be manupulated as well. In order to not expose additional property for itc, for sake of simplicity it was decided to bind those together in same "content type" property. v4: * Added it_content checking in intel_digital_connector_atomic_check. Fixed documentation for new content type enum. v5: * Moved patch revision's description to commit messages. v6: * Minor naming fix for the content type enumeration string. v7: * Fix parameter name for documentation and parameter alignment in order not to get warning. Added Content Type description to new HDMI connector properties section. v8: * Thrown away unneeded numbers from HDMI content-type property description. Switch to strings desription instead of plain definitions. v9: * Moved away hdmi specific content-type enum from drm_connector_state. Content type property should probably not be bound to any specific connector interface in drm_connector_state. Same probably should be done to hdmi_picture_aspect_ration enum which is also contained in drm_connector_state. Added special helper function to get derive hdmi specific relevant infoframe fields. v10: * Added usage description to HDMI properties kernel doc. v11: * Created centralized function for filling HDMI AVI infoframe, based on correspondent DRM property value. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180515135928.31092-3-stanislav.lisovskiy@intel.com [vsyrjala: clean up checkpatch multiple blank lines warnings] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2018-05-15 20:59:28 +07:00
intel_hdmi_set_avi_infoframe(encoder, crtc_state, conn_state);
intel_hdmi_set_spd_infoframe(encoder, crtc_state);
2017-11-14 00:04:19 +07:00
intel_hdmi_set_hdmi_infoframe(encoder, crtc_state, conn_state);
}
void intel_dp_dual_mode_set_tmds_output(struct intel_hdmi *hdmi, bool enable)
{
struct drm_i915_private *dev_priv = to_i915(intel_hdmi_to_dev(hdmi));
struct i2c_adapter *adapter =
intel_gmbus_get_adapter(dev_priv, hdmi->ddc_bus);
if (hdmi->dp_dual_mode.type < DRM_DP_DUAL_MODE_TYPE2_DVI)
return;
DRM_DEBUG_KMS("%s DP dual mode adaptor TMDS output\n",
enable ? "Enabling" : "Disabling");
drm_dp_dual_mode_set_tmds_output(hdmi->dp_dual_mode.type,
adapter, enable);
}
static int intel_hdmi_hdcp_read(struct intel_digital_port *intel_dig_port,
unsigned int offset, void *buffer, size_t size)
{
struct intel_hdmi *hdmi = &intel_dig_port->hdmi;
struct drm_i915_private *dev_priv =
intel_dig_port->base.base.dev->dev_private;
struct i2c_adapter *adapter = intel_gmbus_get_adapter(dev_priv,
hdmi->ddc_bus);
int ret;
u8 start = offset & 0xff;
struct i2c_msg msgs[] = {
{
.addr = DRM_HDCP_DDC_ADDR,
.flags = 0,
.len = 1,
.buf = &start,
},
{
.addr = DRM_HDCP_DDC_ADDR,
.flags = I2C_M_RD,
.len = size,
.buf = buffer
}
};
ret = i2c_transfer(adapter, msgs, ARRAY_SIZE(msgs));
if (ret == ARRAY_SIZE(msgs))
return 0;
return ret >= 0 ? -EIO : ret;
}
static int intel_hdmi_hdcp_write(struct intel_digital_port *intel_dig_port,
unsigned int offset, void *buffer, size_t size)
{
struct intel_hdmi *hdmi = &intel_dig_port->hdmi;
struct drm_i915_private *dev_priv =
intel_dig_port->base.base.dev->dev_private;
struct i2c_adapter *adapter = intel_gmbus_get_adapter(dev_priv,
hdmi->ddc_bus);
int ret;
u8 *write_buf;
struct i2c_msg msg;
write_buf = kzalloc(size + 1, GFP_KERNEL);
if (!write_buf)
return -ENOMEM;
write_buf[0] = offset & 0xff;
memcpy(&write_buf[1], buffer, size);
msg.addr = DRM_HDCP_DDC_ADDR;
msg.flags = 0,
msg.len = size + 1,
msg.buf = write_buf;
ret = i2c_transfer(adapter, &msg, 1);
if (ret == 1)
ret = 0;
else if (ret >= 0)
ret = -EIO;
kfree(write_buf);
return ret;
}
static
int intel_hdmi_hdcp_write_an_aksv(struct intel_digital_port *intel_dig_port,
u8 *an)
{
struct intel_hdmi *hdmi = &intel_dig_port->hdmi;
struct drm_i915_private *dev_priv =
intel_dig_port->base.base.dev->dev_private;
struct i2c_adapter *adapter = intel_gmbus_get_adapter(dev_priv,
hdmi->ddc_bus);
int ret;
ret = intel_hdmi_hdcp_write(intel_dig_port, DRM_HDCP_DDC_AN, an,
DRM_HDCP_AN_LEN);
if (ret) {
DRM_ERROR("Write An over DDC failed (%d)\n", ret);
return ret;
}
ret = intel_gmbus_output_aksv(adapter);
if (ret < 0) {
DRM_ERROR("Failed to output aksv (%d)\n", ret);
return ret;
}
return 0;
}
static int intel_hdmi_hdcp_read_bksv(struct intel_digital_port *intel_dig_port,
u8 *bksv)
{
int ret;
ret = intel_hdmi_hdcp_read(intel_dig_port, DRM_HDCP_DDC_BKSV, bksv,
DRM_HDCP_KSV_LEN);
if (ret)
DRM_ERROR("Read Bksv over DDC failed (%d)\n", ret);
return ret;
}
static
int intel_hdmi_hdcp_read_bstatus(struct intel_digital_port *intel_dig_port,
u8 *bstatus)
{
int ret;
ret = intel_hdmi_hdcp_read(intel_dig_port, DRM_HDCP_DDC_BSTATUS,
bstatus, DRM_HDCP_BSTATUS_LEN);
if (ret)
DRM_ERROR("Read bstatus over DDC failed (%d)\n", ret);
return ret;
}
static
int intel_hdmi_hdcp_repeater_present(struct intel_digital_port *intel_dig_port,
bool *repeater_present)
{
int ret;
u8 val;
ret = intel_hdmi_hdcp_read(intel_dig_port, DRM_HDCP_DDC_BCAPS, &val, 1);
if (ret) {
DRM_ERROR("Read bcaps over DDC failed (%d)\n", ret);
return ret;
}
*repeater_present = val & DRM_HDCP_DDC_BCAPS_REPEATER_PRESENT;
return 0;
}
static
int intel_hdmi_hdcp_read_ri_prime(struct intel_digital_port *intel_dig_port,
u8 *ri_prime)
{
int ret;
ret = intel_hdmi_hdcp_read(intel_dig_port, DRM_HDCP_DDC_RI_PRIME,
ri_prime, DRM_HDCP_RI_LEN);
if (ret)
DRM_ERROR("Read Ri' over DDC failed (%d)\n", ret);
return ret;
}
static
int intel_hdmi_hdcp_read_ksv_ready(struct intel_digital_port *intel_dig_port,
bool *ksv_ready)
{
int ret;
u8 val;
ret = intel_hdmi_hdcp_read(intel_dig_port, DRM_HDCP_DDC_BCAPS, &val, 1);
if (ret) {
DRM_ERROR("Read bcaps over DDC failed (%d)\n", ret);
return ret;
}
*ksv_ready = val & DRM_HDCP_DDC_BCAPS_KSV_FIFO_READY;
return 0;
}
static
int intel_hdmi_hdcp_read_ksv_fifo(struct intel_digital_port *intel_dig_port,
int num_downstream, u8 *ksv_fifo)
{
int ret;
ret = intel_hdmi_hdcp_read(intel_dig_port, DRM_HDCP_DDC_KSV_FIFO,
ksv_fifo, num_downstream * DRM_HDCP_KSV_LEN);
if (ret) {
DRM_ERROR("Read ksv fifo over DDC failed (%d)\n", ret);
return ret;
}
return 0;
}
static
int intel_hdmi_hdcp_read_v_prime_part(struct intel_digital_port *intel_dig_port,
int i, u32 *part)
{
int ret;
if (i >= DRM_HDCP_V_PRIME_NUM_PARTS)
return -EINVAL;
ret = intel_hdmi_hdcp_read(intel_dig_port, DRM_HDCP_DDC_V_PRIME(i),
part, DRM_HDCP_V_PRIME_PART_LEN);
if (ret)
DRM_ERROR("Read V'[%d] over DDC failed (%d)\n", i, ret);
return ret;
}
static
int intel_hdmi_hdcp_toggle_signalling(struct intel_digital_port *intel_dig_port,
bool enable)
{
int ret;
if (!enable)
usleep_range(6, 60); /* Bspec says >= 6us */
ret = intel_ddi_toggle_hdcp_signalling(&intel_dig_port->base, enable);
if (ret) {
DRM_ERROR("%s HDCP signalling failed (%d)\n",
enable ? "Enable" : "Disable", ret);
return ret;
}
return 0;
}
static
bool intel_hdmi_hdcp_check_link(struct intel_digital_port *intel_dig_port)
{
struct drm_i915_private *dev_priv =
intel_dig_port->base.base.dev->dev_private;
enum port port = intel_dig_port->base.port;
int ret;
union {
u32 reg;
u8 shim[DRM_HDCP_RI_LEN];
} ri;
ret = intel_hdmi_hdcp_read_ri_prime(intel_dig_port, ri.shim);
if (ret)
return false;
I915_WRITE(PORT_HDCP_RPRIME(port), ri.reg);
/* Wait for Ri prime match */
if (wait_for(I915_READ(PORT_HDCP_STATUS(port)) &
(HDCP_STATUS_RI_MATCH | HDCP_STATUS_ENC), 1)) {
DRM_ERROR("Ri' mismatch detected, link check failed (%x)\n",
I915_READ(PORT_HDCP_STATUS(port)));
return false;
}
return true;
}
static const struct intel_hdcp_shim intel_hdmi_hdcp_shim = {
.write_an_aksv = intel_hdmi_hdcp_write_an_aksv,
.read_bksv = intel_hdmi_hdcp_read_bksv,
.read_bstatus = intel_hdmi_hdcp_read_bstatus,
.repeater_present = intel_hdmi_hdcp_repeater_present,
.read_ri_prime = intel_hdmi_hdcp_read_ri_prime,
.read_ksv_ready = intel_hdmi_hdcp_read_ksv_ready,
.read_ksv_fifo = intel_hdmi_hdcp_read_ksv_fifo,
.read_v_prime_part = intel_hdmi_hdcp_read_v_prime_part,
.toggle_signalling = intel_hdmi_hdcp_toggle_signalling,
.check_link = intel_hdmi_hdcp_check_link,
};
static void intel_hdmi_prepare(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state)
{
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
const struct drm_display_mode *adjusted_mode = &crtc_state->base.adjusted_mode;
u32 hdmi_val;
intel_dp_dual_mode_set_tmds_output(intel_hdmi, true);
hdmi_val = SDVO_ENCODING_HDMI;
if (!HAS_PCH_SPLIT(dev_priv) && crtc_state->limited_color_range)
hdmi_val |= HDMI_COLOR_RANGE_16_235;
if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
hdmi_val |= SDVO_VSYNC_ACTIVE_HIGH;
if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
hdmi_val |= SDVO_HSYNC_ACTIVE_HIGH;
if (crtc_state->pipe_bpp > 24)
hdmi_val |= HDMI_COLOR_FORMAT_12bpc;
else
hdmi_val |= SDVO_COLOR_FORMAT_8bpc;
if (crtc_state->has_hdmi_sink)
hdmi_val |= HDMI_MODE_SELECT_HDMI;
if (HAS_PCH_CPT(dev_priv))
hdmi_val |= SDVO_PIPE_SEL_CPT(crtc->pipe);
else if (IS_CHERRYVIEW(dev_priv))
hdmi_val |= SDVO_PIPE_SEL_CHV(crtc->pipe);
else
hdmi_val |= SDVO_PIPE_SEL(crtc->pipe);
I915_WRITE(intel_hdmi->hdmi_reg, hdmi_val);
POSTING_READ(intel_hdmi->hdmi_reg);
}
static bool intel_hdmi_get_hw_state(struct intel_encoder *encoder,
enum pipe *pipe)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
bool ret;
if (!intel_display_power_get_if_enabled(dev_priv,
encoder->power_domain))
return false;
ret = intel_sdvo_port_enabled(dev_priv, intel_hdmi->hdmi_reg, pipe);
intel_display_power_put(dev_priv, encoder->power_domain);
return ret;
}
static void intel_hdmi_get_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config)
{
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
struct intel_digital_port *intel_dig_port = hdmi_to_dig_port(intel_hdmi);
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
u32 tmp, flags = 0;
int dotclock;
pipe_config->output_types |= BIT(INTEL_OUTPUT_HDMI);
tmp = I915_READ(intel_hdmi->hdmi_reg);
if (tmp & SDVO_HSYNC_ACTIVE_HIGH)
flags |= DRM_MODE_FLAG_PHSYNC;
else
flags |= DRM_MODE_FLAG_NHSYNC;
if (tmp & SDVO_VSYNC_ACTIVE_HIGH)
flags |= DRM_MODE_FLAG_PVSYNC;
else
flags |= DRM_MODE_FLAG_NVSYNC;
if (tmp & HDMI_MODE_SELECT_HDMI)
pipe_config->has_hdmi_sink = true;
if (intel_dig_port->infoframe_enabled(encoder, pipe_config))
pipe_config->has_infoframe = true;
if (tmp & SDVO_AUDIO_ENABLE)
pipe_config->has_audio = true;
if (!HAS_PCH_SPLIT(dev_priv) &&
tmp & HDMI_COLOR_RANGE_16_235)
pipe_config->limited_color_range = true;
pipe_config->base.adjusted_mode.flags |= flags;
if ((tmp & SDVO_COLOR_FORMAT_MASK) == HDMI_COLOR_FORMAT_12bpc)
dotclock = pipe_config->port_clock * 2 / 3;
else
dotclock = pipe_config->port_clock;
if (pipe_config->pixel_multiplier)
dotclock /= pipe_config->pixel_multiplier;
pipe_config->base.adjusted_mode.crtc_clock = dotclock;
pipe_config->lane_count = 4;
}
static void intel_enable_hdmi_audio(struct intel_encoder *encoder,
const struct intel_crtc_state *pipe_config,
const struct drm_connector_state *conn_state)
{
struct intel_crtc *crtc = to_intel_crtc(pipe_config->base.crtc);
WARN_ON(!pipe_config->has_hdmi_sink);
DRM_DEBUG_DRIVER("Enabling HDMI audio on pipe %c\n",
pipe_name(crtc->pipe));
intel_audio_codec_enable(encoder, pipe_config, conn_state);
}
static void g4x_enable_hdmi(struct intel_encoder *encoder,
const struct intel_crtc_state *pipe_config,
const struct drm_connector_state *conn_state)
{
drm/i915/hdmi: convert to encoder->disable/enable I've picked hdmi as the first encoder to convert because it's rather simple: - no cloning possible - no differences between prepare/commit and dpms off/on switching. A few changes are required to do so: - Split up the dpms code into an enable/disable function and wire it up with the intel encoder. - Noop out the existing encoder prepare/commit functions used by the crtc helper - our crtc enable/disable code now calls back into the encoder enable/disable code at the right spot. - Create new helper functions to handle dpms changes. - Add intel_encoder->connectors_active to better track dpms state. Atm this is unused, but it will be useful to correctly disable the entire display pipe for cloned configurations. Also note that for now this is only useful in the dpms code - thanks to the crtc helper's dpms confusion across a modeset operation we can't (yet) rely on this having a sensible value in all circumstances. - Rip out the encoder helper dpms callback, if this is still getting called somewhere we have a bug. The slight issue with that is that the crtc helper abuses dpms off to disable unused functions. Hence we also need to implement a default encoder disable function to do just that with the new encoder->disable callback. - Note that we drop the cpt modeset verification in the commit callback, too. The right place to do this would be in the crtc's enable function, _after_ all the encoders are set up. But because not all encoders are converted yet, we can't do that. Hence disable this check temporarily as a minor concession to bisectability. v2: Squash the dpms mode to only the supported values - connector->dpms is for internal tracking only, we can hence avoid needless state-changes a bit whithout causing harm. v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-30 13:59:56 +07:00
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
drm/i915/hdmi: convert to encoder->disable/enable I've picked hdmi as the first encoder to convert because it's rather simple: - no cloning possible - no differences between prepare/commit and dpms off/on switching. A few changes are required to do so: - Split up the dpms code into an enable/disable function and wire it up with the intel encoder. - Noop out the existing encoder prepare/commit functions used by the crtc helper - our crtc enable/disable code now calls back into the encoder enable/disable code at the right spot. - Create new helper functions to handle dpms changes. - Add intel_encoder->connectors_active to better track dpms state. Atm this is unused, but it will be useful to correctly disable the entire display pipe for cloned configurations. Also note that for now this is only useful in the dpms code - thanks to the crtc helper's dpms confusion across a modeset operation we can't (yet) rely on this having a sensible value in all circumstances. - Rip out the encoder helper dpms callback, if this is still getting called somewhere we have a bug. The slight issue with that is that the crtc helper abuses dpms off to disable unused functions. Hence we also need to implement a default encoder disable function to do just that with the new encoder->disable callback. - Note that we drop the cpt modeset verification in the commit callback, too. The right place to do this would be in the crtc's enable function, _after_ all the encoders are set up. But because not all encoders are converted yet, we can't do that. Hence disable this check temporarily as a minor concession to bisectability. v2: Squash the dpms mode to only the supported values - connector->dpms is for internal tracking only, we can hence avoid needless state-changes a bit whithout causing harm. v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-30 13:59:56 +07:00
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
u32 temp;
temp = I915_READ(intel_hdmi->hdmi_reg);
temp |= SDVO_ENABLE;
if (pipe_config->has_audio)
temp |= SDVO_AUDIO_ENABLE;
I915_WRITE(intel_hdmi->hdmi_reg, temp);
POSTING_READ(intel_hdmi->hdmi_reg);
if (pipe_config->has_audio)
intel_enable_hdmi_audio(encoder, pipe_config, conn_state);
}
static void ibx_enable_hdmi(struct intel_encoder *encoder,
const struct intel_crtc_state *pipe_config,
const struct drm_connector_state *conn_state)
{
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
u32 temp;
temp = I915_READ(intel_hdmi->hdmi_reg);
temp |= SDVO_ENABLE;
if (pipe_config->has_audio)
temp |= SDVO_AUDIO_ENABLE;
drm/i915/hdmi: convert to encoder->disable/enable I've picked hdmi as the first encoder to convert because it's rather simple: - no cloning possible - no differences between prepare/commit and dpms off/on switching. A few changes are required to do so: - Split up the dpms code into an enable/disable function and wire it up with the intel encoder. - Noop out the existing encoder prepare/commit functions used by the crtc helper - our crtc enable/disable code now calls back into the encoder enable/disable code at the right spot. - Create new helper functions to handle dpms changes. - Add intel_encoder->connectors_active to better track dpms state. Atm this is unused, but it will be useful to correctly disable the entire display pipe for cloned configurations. Also note that for now this is only useful in the dpms code - thanks to the crtc helper's dpms confusion across a modeset operation we can't (yet) rely on this having a sensible value in all circumstances. - Rip out the encoder helper dpms callback, if this is still getting called somewhere we have a bug. The slight issue with that is that the crtc helper abuses dpms off to disable unused functions. Hence we also need to implement a default encoder disable function to do just that with the new encoder->disable callback. - Note that we drop the cpt modeset verification in the commit callback, too. The right place to do this would be in the crtc's enable function, _after_ all the encoders are set up. But because not all encoders are converted yet, we can't do that. Hence disable this check temporarily as a minor concession to bisectability. v2: Squash the dpms mode to only the supported values - connector->dpms is for internal tracking only, we can hence avoid needless state-changes a bit whithout causing harm. v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-30 13:59:56 +07:00
/*
* HW workaround, need to write this twice for issue
* that may result in first write getting masked.
*/
I915_WRITE(intel_hdmi->hdmi_reg, temp);
POSTING_READ(intel_hdmi->hdmi_reg);
I915_WRITE(intel_hdmi->hdmi_reg, temp);
POSTING_READ(intel_hdmi->hdmi_reg);
drm/i915/hdmi: convert to encoder->disable/enable I've picked hdmi as the first encoder to convert because it's rather simple: - no cloning possible - no differences between prepare/commit and dpms off/on switching. A few changes are required to do so: - Split up the dpms code into an enable/disable function and wire it up with the intel encoder. - Noop out the existing encoder prepare/commit functions used by the crtc helper - our crtc enable/disable code now calls back into the encoder enable/disable code at the right spot. - Create new helper functions to handle dpms changes. - Add intel_encoder->connectors_active to better track dpms state. Atm this is unused, but it will be useful to correctly disable the entire display pipe for cloned configurations. Also note that for now this is only useful in the dpms code - thanks to the crtc helper's dpms confusion across a modeset operation we can't (yet) rely on this having a sensible value in all circumstances. - Rip out the encoder helper dpms callback, if this is still getting called somewhere we have a bug. The slight issue with that is that the crtc helper abuses dpms off to disable unused functions. Hence we also need to implement a default encoder disable function to do just that with the new encoder->disable callback. - Note that we drop the cpt modeset verification in the commit callback, too. The right place to do this would be in the crtc's enable function, _after_ all the encoders are set up. But because not all encoders are converted yet, we can't do that. Hence disable this check temporarily as a minor concession to bisectability. v2: Squash the dpms mode to only the supported values - connector->dpms is for internal tracking only, we can hence avoid needless state-changes a bit whithout causing harm. v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-30 13:59:56 +07:00
/*
* HW workaround, need to toggle enable bit off and on
* for 12bpc with pixel repeat.
*
* FIXME: BSpec says this should be done at the end of
* of the modeset sequence, so not sure if this isn't too soon.
drm/i915/hdmi: convert to encoder->disable/enable I've picked hdmi as the first encoder to convert because it's rather simple: - no cloning possible - no differences between prepare/commit and dpms off/on switching. A few changes are required to do so: - Split up the dpms code into an enable/disable function and wire it up with the intel encoder. - Noop out the existing encoder prepare/commit functions used by the crtc helper - our crtc enable/disable code now calls back into the encoder enable/disable code at the right spot. - Create new helper functions to handle dpms changes. - Add intel_encoder->connectors_active to better track dpms state. Atm this is unused, but it will be useful to correctly disable the entire display pipe for cloned configurations. Also note that for now this is only useful in the dpms code - thanks to the crtc helper's dpms confusion across a modeset operation we can't (yet) rely on this having a sensible value in all circumstances. - Rip out the encoder helper dpms callback, if this is still getting called somewhere we have a bug. The slight issue with that is that the crtc helper abuses dpms off to disable unused functions. Hence we also need to implement a default encoder disable function to do just that with the new encoder->disable callback. - Note that we drop the cpt modeset verification in the commit callback, too. The right place to do this would be in the crtc's enable function, _after_ all the encoders are set up. But because not all encoders are converted yet, we can't do that. Hence disable this check temporarily as a minor concession to bisectability. v2: Squash the dpms mode to only the supported values - connector->dpms is for internal tracking only, we can hence avoid needless state-changes a bit whithout causing harm. v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-30 13:59:56 +07:00
*/
if (pipe_config->pipe_bpp > 24 &&
pipe_config->pixel_multiplier > 1) {
I915_WRITE(intel_hdmi->hdmi_reg, temp & ~SDVO_ENABLE);
POSTING_READ(intel_hdmi->hdmi_reg);
/*
* HW workaround, need to write this twice for issue
* that may result in first write getting masked.
*/
I915_WRITE(intel_hdmi->hdmi_reg, temp);
POSTING_READ(intel_hdmi->hdmi_reg);
I915_WRITE(intel_hdmi->hdmi_reg, temp);
POSTING_READ(intel_hdmi->hdmi_reg);
}
if (pipe_config->has_audio)
intel_enable_hdmi_audio(encoder, pipe_config, conn_state);
}
static void cpt_enable_hdmi(struct intel_encoder *encoder,
const struct intel_crtc_state *pipe_config,
const struct drm_connector_state *conn_state)
{
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_crtc *crtc = to_intel_crtc(pipe_config->base.crtc);
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
enum pipe pipe = crtc->pipe;
u32 temp;
temp = I915_READ(intel_hdmi->hdmi_reg);
temp |= SDVO_ENABLE;
if (pipe_config->has_audio)
temp |= SDVO_AUDIO_ENABLE;
/*
* WaEnableHDMI8bpcBefore12bpc:snb,ivb
*
* The procedure for 12bpc is as follows:
* 1. disable HDMI clock gating
* 2. enable HDMI with 8bpc
* 3. enable HDMI with 12bpc
* 4. enable HDMI clock gating
*/
if (pipe_config->pipe_bpp > 24) {
I915_WRITE(TRANS_CHICKEN1(pipe),
I915_READ(TRANS_CHICKEN1(pipe)) |
TRANS_CHICKEN1_HDMIUNIT_GC_DISABLE);
temp &= ~SDVO_COLOR_FORMAT_MASK;
temp |= SDVO_COLOR_FORMAT_8bpc;
}
I915_WRITE(intel_hdmi->hdmi_reg, temp);
POSTING_READ(intel_hdmi->hdmi_reg);
if (pipe_config->pipe_bpp > 24) {
temp &= ~SDVO_COLOR_FORMAT_MASK;
temp |= HDMI_COLOR_FORMAT_12bpc;
I915_WRITE(intel_hdmi->hdmi_reg, temp);
POSTING_READ(intel_hdmi->hdmi_reg);
I915_WRITE(TRANS_CHICKEN1(pipe),
I915_READ(TRANS_CHICKEN1(pipe)) &
~TRANS_CHICKEN1_HDMIUNIT_GC_DISABLE);
}
if (pipe_config->has_audio)
intel_enable_hdmi_audio(encoder, pipe_config, conn_state);
}
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 04:51:36 +07:00
static void vlv_enable_hdmi(struct intel_encoder *encoder,
const struct intel_crtc_state *pipe_config,
const struct drm_connector_state *conn_state)
{
drm/i915/hdmi: convert to encoder->disable/enable I've picked hdmi as the first encoder to convert because it's rather simple: - no cloning possible - no differences between prepare/commit and dpms off/on switching. A few changes are required to do so: - Split up the dpms code into an enable/disable function and wire it up with the intel encoder. - Noop out the existing encoder prepare/commit functions used by the crtc helper - our crtc enable/disable code now calls back into the encoder enable/disable code at the right spot. - Create new helper functions to handle dpms changes. - Add intel_encoder->connectors_active to better track dpms state. Atm this is unused, but it will be useful to correctly disable the entire display pipe for cloned configurations. Also note that for now this is only useful in the dpms code - thanks to the crtc helper's dpms confusion across a modeset operation we can't (yet) rely on this having a sensible value in all circumstances. - Rip out the encoder helper dpms callback, if this is still getting called somewhere we have a bug. The slight issue with that is that the crtc helper abuses dpms off to disable unused functions. Hence we also need to implement a default encoder disable function to do just that with the new encoder->disable callback. - Note that we drop the cpt modeset verification in the commit callback, too. The right place to do this would be in the crtc's enable function, _after_ all the encoders are set up. But because not all encoders are converted yet, we can't do that. Hence disable this check temporarily as a minor concession to bisectability. v2: Squash the dpms mode to only the supported values - connector->dpms is for internal tracking only, we can hence avoid needless state-changes a bit whithout causing harm. v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-30 13:59:56 +07:00
}
static void intel_disable_hdmi(struct intel_encoder *encoder,
const struct intel_crtc_state *old_crtc_state,
const struct drm_connector_state *old_conn_state)
drm/i915/hdmi: convert to encoder->disable/enable I've picked hdmi as the first encoder to convert because it's rather simple: - no cloning possible - no differences between prepare/commit and dpms off/on switching. A few changes are required to do so: - Split up the dpms code into an enable/disable function and wire it up with the intel encoder. - Noop out the existing encoder prepare/commit functions used by the crtc helper - our crtc enable/disable code now calls back into the encoder enable/disable code at the right spot. - Create new helper functions to handle dpms changes. - Add intel_encoder->connectors_active to better track dpms state. Atm this is unused, but it will be useful to correctly disable the entire display pipe for cloned configurations. Also note that for now this is only useful in the dpms code - thanks to the crtc helper's dpms confusion across a modeset operation we can't (yet) rely on this having a sensible value in all circumstances. - Rip out the encoder helper dpms callback, if this is still getting called somewhere we have a bug. The slight issue with that is that the crtc helper abuses dpms off to disable unused functions. Hence we also need to implement a default encoder disable function to do just that with the new encoder->disable callback. - Note that we drop the cpt modeset verification in the commit callback, too. The right place to do this would be in the crtc's enable function, _after_ all the encoders are set up. But because not all encoders are converted yet, we can't do that. Hence disable this check temporarily as a minor concession to bisectability. v2: Squash the dpms mode to only the supported values - connector->dpms is for internal tracking only, we can hence avoid needless state-changes a bit whithout causing harm. v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-30 13:59:56 +07:00
{
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
drm/i915/hdmi: convert to encoder->disable/enable I've picked hdmi as the first encoder to convert because it's rather simple: - no cloning possible - no differences between prepare/commit and dpms off/on switching. A few changes are required to do so: - Split up the dpms code into an enable/disable function and wire it up with the intel encoder. - Noop out the existing encoder prepare/commit functions used by the crtc helper - our crtc enable/disable code now calls back into the encoder enable/disable code at the right spot. - Create new helper functions to handle dpms changes. - Add intel_encoder->connectors_active to better track dpms state. Atm this is unused, but it will be useful to correctly disable the entire display pipe for cloned configurations. Also note that for now this is only useful in the dpms code - thanks to the crtc helper's dpms confusion across a modeset operation we can't (yet) rely on this having a sensible value in all circumstances. - Rip out the encoder helper dpms callback, if this is still getting called somewhere we have a bug. The slight issue with that is that the crtc helper abuses dpms off to disable unused functions. Hence we also need to implement a default encoder disable function to do just that with the new encoder->disable callback. - Note that we drop the cpt modeset verification in the commit callback, too. The right place to do this would be in the crtc's enable function, _after_ all the encoders are set up. But because not all encoders are converted yet, we can't do that. Hence disable this check temporarily as a minor concession to bisectability. v2: Squash the dpms mode to only the supported values - connector->dpms is for internal tracking only, we can hence avoid needless state-changes a bit whithout causing harm. v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-30 13:59:56 +07:00
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
struct intel_digital_port *intel_dig_port =
hdmi_to_dig_port(intel_hdmi);
struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->base.crtc);
drm/i915/hdmi: convert to encoder->disable/enable I've picked hdmi as the first encoder to convert because it's rather simple: - no cloning possible - no differences between prepare/commit and dpms off/on switching. A few changes are required to do so: - Split up the dpms code into an enable/disable function and wire it up with the intel encoder. - Noop out the existing encoder prepare/commit functions used by the crtc helper - our crtc enable/disable code now calls back into the encoder enable/disable code at the right spot. - Create new helper functions to handle dpms changes. - Add intel_encoder->connectors_active to better track dpms state. Atm this is unused, but it will be useful to correctly disable the entire display pipe for cloned configurations. Also note that for now this is only useful in the dpms code - thanks to the crtc helper's dpms confusion across a modeset operation we can't (yet) rely on this having a sensible value in all circumstances. - Rip out the encoder helper dpms callback, if this is still getting called somewhere we have a bug. The slight issue with that is that the crtc helper abuses dpms off to disable unused functions. Hence we also need to implement a default encoder disable function to do just that with the new encoder->disable callback. - Note that we drop the cpt modeset verification in the commit callback, too. The right place to do this would be in the crtc's enable function, _after_ all the encoders are set up. But because not all encoders are converted yet, we can't do that. Hence disable this check temporarily as a minor concession to bisectability. v2: Squash the dpms mode to only the supported values - connector->dpms is for internal tracking only, we can hence avoid needless state-changes a bit whithout causing harm. v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-30 13:59:56 +07:00
u32 temp;
temp = I915_READ(intel_hdmi->hdmi_reg);
drm/i915/hdmi: convert to encoder->disable/enable I've picked hdmi as the first encoder to convert because it's rather simple: - no cloning possible - no differences between prepare/commit and dpms off/on switching. A few changes are required to do so: - Split up the dpms code into an enable/disable function and wire it up with the intel encoder. - Noop out the existing encoder prepare/commit functions used by the crtc helper - our crtc enable/disable code now calls back into the encoder enable/disable code at the right spot. - Create new helper functions to handle dpms changes. - Add intel_encoder->connectors_active to better track dpms state. Atm this is unused, but it will be useful to correctly disable the entire display pipe for cloned configurations. Also note that for now this is only useful in the dpms code - thanks to the crtc helper's dpms confusion across a modeset operation we can't (yet) rely on this having a sensible value in all circumstances. - Rip out the encoder helper dpms callback, if this is still getting called somewhere we have a bug. The slight issue with that is that the crtc helper abuses dpms off to disable unused functions. Hence we also need to implement a default encoder disable function to do just that with the new encoder->disable callback. - Note that we drop the cpt modeset verification in the commit callback, too. The right place to do this would be in the crtc's enable function, _after_ all the encoders are set up. But because not all encoders are converted yet, we can't do that. Hence disable this check temporarily as a minor concession to bisectability. v2: Squash the dpms mode to only the supported values - connector->dpms is for internal tracking only, we can hence avoid needless state-changes a bit whithout causing harm. v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-30 13:59:56 +07:00
temp &= ~(SDVO_ENABLE | SDVO_AUDIO_ENABLE);
I915_WRITE(intel_hdmi->hdmi_reg, temp);
POSTING_READ(intel_hdmi->hdmi_reg);
/*
* HW workaround for IBX, we need to move the port
* to transcoder A after disabling it to allow the
* matching DP port to be enabled on transcoder A.
*/
if (HAS_PCH_IBX(dev_priv) && crtc->pipe == PIPE_B) {
/*
* We get CPU/PCH FIFO underruns on the other pipe when
* doing the workaround. Sweep them under the rug.
*/
intel_set_cpu_fifo_underrun_reporting(dev_priv, PIPE_A, false);
intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, false);
temp &= ~SDVO_PIPE_SEL_MASK;
temp |= SDVO_ENABLE | SDVO_PIPE_SEL(PIPE_A);
/*
* HW workaround, need to write this twice for issue
* that may result in first write getting masked.
*/
I915_WRITE(intel_hdmi->hdmi_reg, temp);
POSTING_READ(intel_hdmi->hdmi_reg);
I915_WRITE(intel_hdmi->hdmi_reg, temp);
POSTING_READ(intel_hdmi->hdmi_reg);
temp &= ~SDVO_ENABLE;
I915_WRITE(intel_hdmi->hdmi_reg, temp);
POSTING_READ(intel_hdmi->hdmi_reg);
intel_wait_for_vblank_if_active(dev_priv, PIPE_A);
intel_set_cpu_fifo_underrun_reporting(dev_priv, PIPE_A, true);
intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, true);
}
intel_dig_port->set_infoframes(encoder,
false,
old_crtc_state, old_conn_state);
intel_dp_dual_mode_set_tmds_output(intel_hdmi, false);
}
static void g4x_disable_hdmi(struct intel_encoder *encoder,
const struct intel_crtc_state *old_crtc_state,
const struct drm_connector_state *old_conn_state)
{
if (old_crtc_state->has_audio)
intel_audio_codec_disable(encoder,
old_crtc_state, old_conn_state);
intel_disable_hdmi(encoder, old_crtc_state, old_conn_state);
}
static void pch_disable_hdmi(struct intel_encoder *encoder,
const struct intel_crtc_state *old_crtc_state,
const struct drm_connector_state *old_conn_state)
{
if (old_crtc_state->has_audio)
intel_audio_codec_disable(encoder,
old_crtc_state, old_conn_state);
}
static void pch_post_disable_hdmi(struct intel_encoder *encoder,
const struct intel_crtc_state *old_crtc_state,
const struct drm_connector_state *old_conn_state)
{
intel_disable_hdmi(encoder, old_crtc_state, old_conn_state);
}
static int intel_hdmi_source_max_tmds_clock(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
const struct ddi_vbt_port_info *info =
&dev_priv->vbt.ddi_port_info[encoder->port];
int max_tmds_clock;
if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
max_tmds_clock = 594000;
else if (INTEL_GEN(dev_priv) >= 8 || IS_HASWELL(dev_priv))
max_tmds_clock = 300000;
else if (INTEL_GEN(dev_priv) >= 5)
max_tmds_clock = 225000;
else
max_tmds_clock = 165000;
if (info->max_tmds_clock)
max_tmds_clock = min(max_tmds_clock, info->max_tmds_clock);
return max_tmds_clock;
}
drm/i915: Respect DP++ adaptor TMDS clock limit Try to detect the max TMDS clock limit for the DP++ adaptor (if any) and take it into account when checking the port clock. Note that as with the sink (HDMI vs. DVI) TMDS clock limit we'll ignore the adaptor TMDS clock limit in the modeset path, in case users are already "overclocking" their TMDS links. One subtle change here is that we'll have to respect the adaptor TMDS clock limit when we decide whether to do 12bpc or 8bpc, otherwise we might end up picking 12bpc and accidentally driving the TMDS link out of spec even when the user chose a mode that fits wihting the limits at 8bpc. This means you can't "overclock" your DP++ dongle at 12bpc anymore, but you can continue to do so at 8bpc. Note that for simplicity we'll use the I2C access method for all dual mode adaptors including type 2. Otherwise we'd have to start mixing DP AUX and HDMI together. In the future we may need to do that if we come across any board designs that don't hook up the DDC pins to the DP++ connectors. Such boards would obviously only work with type 2 dual mode adaptors, and not type 1. v2: Store adaptor type under indel_hdmi->dp_dual_mode Deal with DRM_DP_DUAL_MODE_UNKNOWN Pass adaptor type to drm_dp_dual_mode_max_tmds_clock(), and use it for type1 adaptors as well Cc: stable@vger.kernel.org Reported-by: Tore Anderson <tore@fud.no> Fixes: 7a0baa623446 ("Revert "drm/i915: Disable 12bpc hdmi for now"") Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1462216105-20881-3-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
2016-05-03 02:08:23 +07:00
static int hdmi_port_clock_limit(struct intel_hdmi *hdmi,
bool respect_downstream_limits,
bool force_dvi)
drm/i915: Respect DP++ adaptor TMDS clock limit Try to detect the max TMDS clock limit for the DP++ adaptor (if any) and take it into account when checking the port clock. Note that as with the sink (HDMI vs. DVI) TMDS clock limit we'll ignore the adaptor TMDS clock limit in the modeset path, in case users are already "overclocking" their TMDS links. One subtle change here is that we'll have to respect the adaptor TMDS clock limit when we decide whether to do 12bpc or 8bpc, otherwise we might end up picking 12bpc and accidentally driving the TMDS link out of spec even when the user chose a mode that fits wihting the limits at 8bpc. This means you can't "overclock" your DP++ dongle at 12bpc anymore, but you can continue to do so at 8bpc. Note that for simplicity we'll use the I2C access method for all dual mode adaptors including type 2. Otherwise we'd have to start mixing DP AUX and HDMI together. In the future we may need to do that if we come across any board designs that don't hook up the DDC pins to the DP++ connectors. Such boards would obviously only work with type 2 dual mode adaptors, and not type 1. v2: Store adaptor type under indel_hdmi->dp_dual_mode Deal with DRM_DP_DUAL_MODE_UNKNOWN Pass adaptor type to drm_dp_dual_mode_max_tmds_clock(), and use it for type1 adaptors as well Cc: stable@vger.kernel.org Reported-by: Tore Anderson <tore@fud.no> Fixes: 7a0baa623446 ("Revert "drm/i915: Disable 12bpc hdmi for now"") Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1462216105-20881-3-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
2016-05-03 02:08:23 +07:00
{
struct intel_encoder *encoder = &hdmi_to_dig_port(hdmi)->base;
int max_tmds_clock = intel_hdmi_source_max_tmds_clock(encoder);
drm/i915: Respect DP++ adaptor TMDS clock limit Try to detect the max TMDS clock limit for the DP++ adaptor (if any) and take it into account when checking the port clock. Note that as with the sink (HDMI vs. DVI) TMDS clock limit we'll ignore the adaptor TMDS clock limit in the modeset path, in case users are already "overclocking" their TMDS links. One subtle change here is that we'll have to respect the adaptor TMDS clock limit when we decide whether to do 12bpc or 8bpc, otherwise we might end up picking 12bpc and accidentally driving the TMDS link out of spec even when the user chose a mode that fits wihting the limits at 8bpc. This means you can't "overclock" your DP++ dongle at 12bpc anymore, but you can continue to do so at 8bpc. Note that for simplicity we'll use the I2C access method for all dual mode adaptors including type 2. Otherwise we'd have to start mixing DP AUX and HDMI together. In the future we may need to do that if we come across any board designs that don't hook up the DDC pins to the DP++ connectors. Such boards would obviously only work with type 2 dual mode adaptors, and not type 1. v2: Store adaptor type under indel_hdmi->dp_dual_mode Deal with DRM_DP_DUAL_MODE_UNKNOWN Pass adaptor type to drm_dp_dual_mode_max_tmds_clock(), and use it for type1 adaptors as well Cc: stable@vger.kernel.org Reported-by: Tore Anderson <tore@fud.no> Fixes: 7a0baa623446 ("Revert "drm/i915: Disable 12bpc hdmi for now"") Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1462216105-20881-3-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
2016-05-03 02:08:23 +07:00
if (respect_downstream_limits) {
struct intel_connector *connector = hdmi->attached_connector;
const struct drm_display_info *info = &connector->base.display_info;
drm/i915: Respect DP++ adaptor TMDS clock limit Try to detect the max TMDS clock limit for the DP++ adaptor (if any) and take it into account when checking the port clock. Note that as with the sink (HDMI vs. DVI) TMDS clock limit we'll ignore the adaptor TMDS clock limit in the modeset path, in case users are already "overclocking" their TMDS links. One subtle change here is that we'll have to respect the adaptor TMDS clock limit when we decide whether to do 12bpc or 8bpc, otherwise we might end up picking 12bpc and accidentally driving the TMDS link out of spec even when the user chose a mode that fits wihting the limits at 8bpc. This means you can't "overclock" your DP++ dongle at 12bpc anymore, but you can continue to do so at 8bpc. Note that for simplicity we'll use the I2C access method for all dual mode adaptors including type 2. Otherwise we'd have to start mixing DP AUX and HDMI together. In the future we may need to do that if we come across any board designs that don't hook up the DDC pins to the DP++ connectors. Such boards would obviously only work with type 2 dual mode adaptors, and not type 1. v2: Store adaptor type under indel_hdmi->dp_dual_mode Deal with DRM_DP_DUAL_MODE_UNKNOWN Pass adaptor type to drm_dp_dual_mode_max_tmds_clock(), and use it for type1 adaptors as well Cc: stable@vger.kernel.org Reported-by: Tore Anderson <tore@fud.no> Fixes: 7a0baa623446 ("Revert "drm/i915: Disable 12bpc hdmi for now"") Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1462216105-20881-3-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
2016-05-03 02:08:23 +07:00
if (hdmi->dp_dual_mode.max_tmds_clock)
max_tmds_clock = min(max_tmds_clock,
hdmi->dp_dual_mode.max_tmds_clock);
if (info->max_tmds_clock)
max_tmds_clock = min(max_tmds_clock,
info->max_tmds_clock);
else if (!hdmi->has_hdmi_sink || force_dvi)
drm/i915: Respect DP++ adaptor TMDS clock limit Try to detect the max TMDS clock limit for the DP++ adaptor (if any) and take it into account when checking the port clock. Note that as with the sink (HDMI vs. DVI) TMDS clock limit we'll ignore the adaptor TMDS clock limit in the modeset path, in case users are already "overclocking" their TMDS links. One subtle change here is that we'll have to respect the adaptor TMDS clock limit when we decide whether to do 12bpc or 8bpc, otherwise we might end up picking 12bpc and accidentally driving the TMDS link out of spec even when the user chose a mode that fits wihting the limits at 8bpc. This means you can't "overclock" your DP++ dongle at 12bpc anymore, but you can continue to do so at 8bpc. Note that for simplicity we'll use the I2C access method for all dual mode adaptors including type 2. Otherwise we'd have to start mixing DP AUX and HDMI together. In the future we may need to do that if we come across any board designs that don't hook up the DDC pins to the DP++ connectors. Such boards would obviously only work with type 2 dual mode adaptors, and not type 1. v2: Store adaptor type under indel_hdmi->dp_dual_mode Deal with DRM_DP_DUAL_MODE_UNKNOWN Pass adaptor type to drm_dp_dual_mode_max_tmds_clock(), and use it for type1 adaptors as well Cc: stable@vger.kernel.org Reported-by: Tore Anderson <tore@fud.no> Fixes: 7a0baa623446 ("Revert "drm/i915: Disable 12bpc hdmi for now"") Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1462216105-20881-3-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
2016-05-03 02:08:23 +07:00
max_tmds_clock = min(max_tmds_clock, 165000);
}
return max_tmds_clock;
}
static enum drm_mode_status
hdmi_port_clock_valid(struct intel_hdmi *hdmi,
int clock, bool respect_downstream_limits,
bool force_dvi)
{
struct drm_i915_private *dev_priv = to_i915(intel_hdmi_to_dev(hdmi));
if (clock < 25000)
return MODE_CLOCK_LOW;
if (clock > hdmi_port_clock_limit(hdmi, respect_downstream_limits, force_dvi))
return MODE_CLOCK_HIGH;
/* BXT DPLL can't generate 223-240 MHz */
if (IS_GEN9_LP(dev_priv) && clock > 223333 && clock < 240000)
return MODE_CLOCK_RANGE;
/* CHV DPLL can't generate 216-240 MHz */
if (IS_CHERRYVIEW(dev_priv) && clock > 216000 && clock < 240000)
return MODE_CLOCK_RANGE;
return MODE_OK;
}
static enum drm_mode_status
intel_hdmi_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
struct intel_hdmi *hdmi = intel_attached_hdmi(connector);
struct drm_device *dev = intel_hdmi_to_dev(hdmi);
struct drm_i915_private *dev_priv = to_i915(dev);
enum drm_mode_status status;
int clock;
int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
bool force_dvi =
READ_ONCE(to_intel_digital_connector_state(connector->state)->force_audio) == HDMI_AUDIO_OFF_DVI;
if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
return MODE_NO_DBLESCAN;
clock = mode->clock;
if ((mode->flags & DRM_MODE_FLAG_3D_MASK) == DRM_MODE_FLAG_3D_FRAME_PACKING)
clock *= 2;
if (clock > max_dotclk)
return MODE_CLOCK_HIGH;
if (mode->flags & DRM_MODE_FLAG_DBLCLK)
clock *= 2;
drm/i915: prepare pipe for YCBCR420 output To get HDMI YCBCR420 output, the PIPEMISC register should be programmed to: - Generate YCBCR output (bit 11) - In case of YCBCR420 outputs, it should be programmed in full blend mode to use the scaler in 5x3 ratio (bits 26 and 27) This patch: - Adds definition of these bits. - Programs PIPEMISC for YCBCR420 outputs. - Adds readouts to compare HW and SW states. V2: rebase V3: rebase V4: rebase V5: added r-b from Ander V6: Handle only YCBCR420 outputs (ville) V7: rebase V8: Addressed review comments from Ville - Add readouts for state->ycbcr420 and 420 pixel_clock. - Handle warning due to mismatch in clock for ycbcr420 clock. - Rename PIPEMISC macros to match the Bspec. - Add a debug print stating if YCBCR 4:2:0 output enabled. Added r-b from Ville V9: Addressed review comments from Imre: - Add 420 mode clock adjustment in intel_hdmi_mode_valid to prevent 420_only modes getting rejected for high clock. - Add port clock adjustment for ycbcr420 modes in ddi_get_clock - Rename macros as per Ville's suggestion. - Remove unnecessary wl changes. V10: Added r-b from Imre V11: Fixed faulty dotclock handling, and addressed missing comment from previous set of review comments (Imre) V12: Fixed dotclock for 12bpc too, removed 420 check for GEN < 10 Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1500904172-31717-1-git-send-email-shashank.sharma@intel.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-24 20:49:32 +07:00
if (drm_mode_is_420_only(&connector->display_info, mode))
clock /= 2;
/* check if we can do 8bpc */
status = hdmi_port_clock_valid(hdmi, clock, true, force_dvi);
if (hdmi->has_hdmi_sink && !force_dvi) {
/* if we can't do 8bpc we may still be able to do 12bpc */
if (status != MODE_OK && !HAS_GMCH_DISPLAY(dev_priv))
status = hdmi_port_clock_valid(hdmi, clock * 3 / 2,
true, force_dvi);
/* if we can't do 8,12bpc we may still be able to do 10bpc */
if (status != MODE_OK && INTEL_GEN(dev_priv) >= 11)
status = hdmi_port_clock_valid(hdmi, clock * 5 / 4,
true, force_dvi);
}
return status;
}
static bool hdmi_deep_color_possible(const struct intel_crtc_state *crtc_state,
int bpc)
{
struct drm_i915_private *dev_priv =
to_i915(crtc_state->base.crtc->dev);
struct drm_atomic_state *state = crtc_state->base.state;
struct drm_connector_state *connector_state;
struct drm_connector *connector;
int i;
if (HAS_GMCH_DISPLAY(dev_priv))
return false;
if (bpc == 10 && INTEL_GEN(dev_priv) < 11)
return false;
if (crtc_state->pipe_bpp <= 8*3)
return false;
if (!crtc_state->has_hdmi_sink)
return false;
/*
* HDMI deep color affects the clocks, so it's only possible
* when not cloning with other encoder types.
*/
if (crtc_state->output_types != 1 << INTEL_OUTPUT_HDMI)
return false;
for_each_new_connector_in_state(state, connector, connector_state, i) {
const struct drm_display_info *info = &connector->display_info;
if (connector_state->crtc != crtc_state->base.crtc)
continue;
drm/i915: Add CRTC output format YCBCR 4:2:0 Currently, we are using a bool in CRTC state (state->ycbcr420), to indicate modeset, that the output format is YCBCR 4:2:0. Now in order to support other YCBCR formats, we will need more such flags. This patch adds a new enum parameter for YCBCR 4:2:0 outputs, in the CRTC output formats and then plugs it during the modeset. V3: Added this patch in the series, to address review comments from second patchset. V4: Added r-b from Maarten (on v3) Addressed review comments from Ville: - Change the enum name to intel_output_format. - Start the enum value (INVALID) from 0 instaed of 1. - Set the crtc's output_format to RGB in encoder's compute_config. V5: Broke previous patch 1 into two parts, - first patch to add CRTC output format in general - second patch (this one) to add YCBCR 4:2:0 output format specifically. - Use ARRAY_SIZE(format_str) for output format validity check (Ville) V6: Added a separate function to calculate crtc_state->output_format, and calling it from various get_config function (Fix CI build warning) V7: Fixed checkpatch warnings for alignment V8: Rebase V9: Rebase V10: Rebase V11: Addressed review comments from Ville: - Change check for CRTC output format from > ARRAY_SIZE to >= ARRAY_SIZE. - Check for values < INTEL_OUTPUT_FORMAT_RGB is unnecessary. - No need to get CRTC YCBCR config, for pre-BDW functions. Added Ville's r-b. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1539325394-20788-2-git-send-email-shashank.sharma@intel.com
2018-10-12 13:23:08 +07:00
if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) {
drm/i915: add config function for YCBCR420 outputs This patch checks encoder level support for YCBCR420 outputs. The logic goes as simple as this: If the input mode is YCBCR420-only mode: prepare HDMI for YCBCR420 output, else continue with RGB output mode. It checks if the mode is YCBCR420 and source can support this output then it marks the ycbcr_420 output indicator into crtc state, for further staging in driver. V2: Split the patch into two, kept helper functions in DRM layer. V3: Changed the compute_config function based on new DRM API. V4: Rebase V5: Rebase V6: Check and handle YCBCR420-only modes, discard the property based approach (Ville) V7: Addressed review comments from Ville - add else case in 12BPC check. - extract ycbcr420 state inside hdmi_12bpc_possible function. V8: Addressed review comments from Ville - Remove extra blank lines. - Remove "HDMI" from the description of ycbcr420 state variable. - Remove local variable, use crtc_state->ycbcr420 instead. Added r-b from Ville. V9: Rebase V10: Added r-b from Imre Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1500650709-14447-2-git-send-email-shashank.sharma@intel.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-21 22:25:04 +07:00
const struct drm_hdmi_info *hdmi = &info->hdmi;
if (bpc == 12 && !(hdmi->y420_dc_modes &
DRM_EDID_YCBCR420_DC_36))
return false;
else if (bpc == 10 && !(hdmi->y420_dc_modes &
DRM_EDID_YCBCR420_DC_30))
drm/i915: add config function for YCBCR420 outputs This patch checks encoder level support for YCBCR420 outputs. The logic goes as simple as this: If the input mode is YCBCR420-only mode: prepare HDMI for YCBCR420 output, else continue with RGB output mode. It checks if the mode is YCBCR420 and source can support this output then it marks the ycbcr_420 output indicator into crtc state, for further staging in driver. V2: Split the patch into two, kept helper functions in DRM layer. V3: Changed the compute_config function based on new DRM API. V4: Rebase V5: Rebase V6: Check and handle YCBCR420-only modes, discard the property based approach (Ville) V7: Addressed review comments from Ville - add else case in 12BPC check. - extract ycbcr420 state inside hdmi_12bpc_possible function. V8: Addressed review comments from Ville - Remove extra blank lines. - Remove "HDMI" from the description of ycbcr420 state variable. - Remove local variable, use crtc_state->ycbcr420 instead. Added r-b from Ville. V9: Rebase V10: Added r-b from Imre Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1500650709-14447-2-git-send-email-shashank.sharma@intel.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-21 22:25:04 +07:00
return false;
} else {
if (bpc == 12 && !(info->edid_hdmi_dc_modes &
DRM_EDID_HDMI_DC_36))
return false;
else if (bpc == 10 && !(info->edid_hdmi_dc_modes &
DRM_EDID_HDMI_DC_30))
drm/i915: add config function for YCBCR420 outputs This patch checks encoder level support for YCBCR420 outputs. The logic goes as simple as this: If the input mode is YCBCR420-only mode: prepare HDMI for YCBCR420 output, else continue with RGB output mode. It checks if the mode is YCBCR420 and source can support this output then it marks the ycbcr_420 output indicator into crtc state, for further staging in driver. V2: Split the patch into two, kept helper functions in DRM layer. V3: Changed the compute_config function based on new DRM API. V4: Rebase V5: Rebase V6: Check and handle YCBCR420-only modes, discard the property based approach (Ville) V7: Addressed review comments from Ville - add else case in 12BPC check. - extract ycbcr420 state inside hdmi_12bpc_possible function. V8: Addressed review comments from Ville - Remove extra blank lines. - Remove "HDMI" from the description of ycbcr420 state variable. - Remove local variable, use crtc_state->ycbcr420 instead. Added r-b from Ville. V9: Rebase V10: Added r-b from Imre Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1500650709-14447-2-git-send-email-shashank.sharma@intel.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-21 22:25:04 +07:00
return false;
}
}
/* Display WA #1139: glk */
if (bpc == 12 && IS_GLK_REVID(dev_priv, 0, GLK_REVID_A1) &&
crtc_state->base.adjusted_mode.htotal > 5460)
return false;
return true;
}
drm/i915: add config function for YCBCR420 outputs This patch checks encoder level support for YCBCR420 outputs. The logic goes as simple as this: If the input mode is YCBCR420-only mode: prepare HDMI for YCBCR420 output, else continue with RGB output mode. It checks if the mode is YCBCR420 and source can support this output then it marks the ycbcr_420 output indicator into crtc state, for further staging in driver. V2: Split the patch into two, kept helper functions in DRM layer. V3: Changed the compute_config function based on new DRM API. V4: Rebase V5: Rebase V6: Check and handle YCBCR420-only modes, discard the property based approach (Ville) V7: Addressed review comments from Ville - add else case in 12BPC check. - extract ycbcr420 state inside hdmi_12bpc_possible function. V8: Addressed review comments from Ville - Remove extra blank lines. - Remove "HDMI" from the description of ycbcr420 state variable. - Remove local variable, use crtc_state->ycbcr420 instead. Added r-b from Ville. V9: Rebase V10: Added r-b from Imre Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1500650709-14447-2-git-send-email-shashank.sharma@intel.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-21 22:25:04 +07:00
static bool
intel_hdmi_ycbcr420_config(struct drm_connector *connector,
struct intel_crtc_state *config,
int *clock_12bpc, int *clock_10bpc,
int *clock_8bpc)
drm/i915: add config function for YCBCR420 outputs This patch checks encoder level support for YCBCR420 outputs. The logic goes as simple as this: If the input mode is YCBCR420-only mode: prepare HDMI for YCBCR420 output, else continue with RGB output mode. It checks if the mode is YCBCR420 and source can support this output then it marks the ycbcr_420 output indicator into crtc state, for further staging in driver. V2: Split the patch into two, kept helper functions in DRM layer. V3: Changed the compute_config function based on new DRM API. V4: Rebase V5: Rebase V6: Check and handle YCBCR420-only modes, discard the property based approach (Ville) V7: Addressed review comments from Ville - add else case in 12BPC check. - extract ycbcr420 state inside hdmi_12bpc_possible function. V8: Addressed review comments from Ville - Remove extra blank lines. - Remove "HDMI" from the description of ycbcr420 state variable. - Remove local variable, use crtc_state->ycbcr420 instead. Added r-b from Ville. V9: Rebase V10: Added r-b from Imre Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1500650709-14447-2-git-send-email-shashank.sharma@intel.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-21 22:25:04 +07:00
{
struct intel_crtc *intel_crtc = to_intel_crtc(config->base.crtc);
drm/i915: add config function for YCBCR420 outputs This patch checks encoder level support for YCBCR420 outputs. The logic goes as simple as this: If the input mode is YCBCR420-only mode: prepare HDMI for YCBCR420 output, else continue with RGB output mode. It checks if the mode is YCBCR420 and source can support this output then it marks the ycbcr_420 output indicator into crtc state, for further staging in driver. V2: Split the patch into two, kept helper functions in DRM layer. V3: Changed the compute_config function based on new DRM API. V4: Rebase V5: Rebase V6: Check and handle YCBCR420-only modes, discard the property based approach (Ville) V7: Addressed review comments from Ville - add else case in 12BPC check. - extract ycbcr420 state inside hdmi_12bpc_possible function. V8: Addressed review comments from Ville - Remove extra blank lines. - Remove "HDMI" from the description of ycbcr420 state variable. - Remove local variable, use crtc_state->ycbcr420 instead. Added r-b from Ville. V9: Rebase V10: Added r-b from Imre Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1500650709-14447-2-git-send-email-shashank.sharma@intel.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-21 22:25:04 +07:00
if (!connector->ycbcr_420_allowed) {
DRM_ERROR("Platform doesn't support YCBCR420 output\n");
return false;
}
/* YCBCR420 TMDS rate requirement is half the pixel clock */
config->port_clock /= 2;
*clock_12bpc /= 2;
*clock_10bpc /= 2;
drm/i915: add config function for YCBCR420 outputs This patch checks encoder level support for YCBCR420 outputs. The logic goes as simple as this: If the input mode is YCBCR420-only mode: prepare HDMI for YCBCR420 output, else continue with RGB output mode. It checks if the mode is YCBCR420 and source can support this output then it marks the ycbcr_420 output indicator into crtc state, for further staging in driver. V2: Split the patch into two, kept helper functions in DRM layer. V3: Changed the compute_config function based on new DRM API. V4: Rebase V5: Rebase V6: Check and handle YCBCR420-only modes, discard the property based approach (Ville) V7: Addressed review comments from Ville - add else case in 12BPC check. - extract ycbcr420 state inside hdmi_12bpc_possible function. V8: Addressed review comments from Ville - Remove extra blank lines. - Remove "HDMI" from the description of ycbcr420 state variable. - Remove local variable, use crtc_state->ycbcr420 instead. Added r-b from Ville. V9: Rebase V10: Added r-b from Imre Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1500650709-14447-2-git-send-email-shashank.sharma@intel.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-21 22:25:04 +07:00
*clock_8bpc /= 2;
drm/i915: Add CRTC output format YCBCR 4:2:0 Currently, we are using a bool in CRTC state (state->ycbcr420), to indicate modeset, that the output format is YCBCR 4:2:0. Now in order to support other YCBCR formats, we will need more such flags. This patch adds a new enum parameter for YCBCR 4:2:0 outputs, in the CRTC output formats and then plugs it during the modeset. V3: Added this patch in the series, to address review comments from second patchset. V4: Added r-b from Maarten (on v3) Addressed review comments from Ville: - Change the enum name to intel_output_format. - Start the enum value (INVALID) from 0 instaed of 1. - Set the crtc's output_format to RGB in encoder's compute_config. V5: Broke previous patch 1 into two parts, - first patch to add CRTC output format in general - second patch (this one) to add YCBCR 4:2:0 output format specifically. - Use ARRAY_SIZE(format_str) for output format validity check (Ville) V6: Added a separate function to calculate crtc_state->output_format, and calling it from various get_config function (Fix CI build warning) V7: Fixed checkpatch warnings for alignment V8: Rebase V9: Rebase V10: Rebase V11: Addressed review comments from Ville: - Change check for CRTC output format from > ARRAY_SIZE to >= ARRAY_SIZE. - Check for values < INTEL_OUTPUT_FORMAT_RGB is unnecessary. - No need to get CRTC YCBCR config, for pre-BDW functions. Added Ville's r-b. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1539325394-20788-2-git-send-email-shashank.sharma@intel.com
2018-10-12 13:23:08 +07:00
config->output_format = INTEL_OUTPUT_FORMAT_YCBCR420;
/* YCBCR 420 output conversion needs a scaler */
if (skl_update_scaler_crtc(config)) {
DRM_DEBUG_KMS("Scaler allocation for output failed\n");
return false;
}
intel_pch_panel_fitting(intel_crtc, config,
DRM_MODE_SCALE_FULLSCREEN);
drm/i915: add config function for YCBCR420 outputs This patch checks encoder level support for YCBCR420 outputs. The logic goes as simple as this: If the input mode is YCBCR420-only mode: prepare HDMI for YCBCR420 output, else continue with RGB output mode. It checks if the mode is YCBCR420 and source can support this output then it marks the ycbcr_420 output indicator into crtc state, for further staging in driver. V2: Split the patch into two, kept helper functions in DRM layer. V3: Changed the compute_config function based on new DRM API. V4: Rebase V5: Rebase V6: Check and handle YCBCR420-only modes, discard the property based approach (Ville) V7: Addressed review comments from Ville - add else case in 12BPC check. - extract ycbcr420 state inside hdmi_12bpc_possible function. V8: Addressed review comments from Ville - Remove extra blank lines. - Remove "HDMI" from the description of ycbcr420 state variable. - Remove local variable, use crtc_state->ycbcr420 instead. Added r-b from Ville. V9: Rebase V10: Added r-b from Imre Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1500650709-14447-2-git-send-email-shashank.sharma@intel.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-21 22:25:04 +07:00
return true;
}
bool intel_hdmi_compute_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config,
struct drm_connector_state *conn_state)
{
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
drm/i915: add config function for YCBCR420 outputs This patch checks encoder level support for YCBCR420 outputs. The logic goes as simple as this: If the input mode is YCBCR420-only mode: prepare HDMI for YCBCR420 output, else continue with RGB output mode. It checks if the mode is YCBCR420 and source can support this output then it marks the ycbcr_420 output indicator into crtc state, for further staging in driver. V2: Split the patch into two, kept helper functions in DRM layer. V3: Changed the compute_config function based on new DRM API. V4: Rebase V5: Rebase V6: Check and handle YCBCR420-only modes, discard the property based approach (Ville) V7: Addressed review comments from Ville - add else case in 12BPC check. - extract ycbcr420 state inside hdmi_12bpc_possible function. V8: Addressed review comments from Ville - Remove extra blank lines. - Remove "HDMI" from the description of ycbcr420 state variable. - Remove local variable, use crtc_state->ycbcr420 instead. Added r-b from Ville. V9: Rebase V10: Added r-b from Imre Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1500650709-14447-2-git-send-email-shashank.sharma@intel.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-21 22:25:04 +07:00
struct drm_connector *connector = conn_state->connector;
struct drm_scdc *scdc = &connector->display_info.hdmi.scdc;
struct intel_digital_connector_state *intel_conn_state =
to_intel_digital_connector_state(conn_state);
int clock_8bpc = pipe_config->base.adjusted_mode.crtc_clock;
int clock_10bpc = clock_8bpc * 5 / 4;
int clock_12bpc = clock_8bpc * 3 / 2;
drm/i915: implement fdi auto-dithering So on a bunch of setups we only have 2 fdi lanes available, e.g. hsw VGA or 3 pipes on ivb. And seemingly a lot of modes don't quite fit into this, among them the default 1080p mode. The solution is to dither down the pipe a bit so that everything fits, which this patch implements. But ports compute their state under the assumption that the bpp they pick will be the one selected, e.g. the display port bw computations won't work otherwise. Now we could adjust our code to again up-dither to the computed DP link parameters, but that's pointless. So instead when the pipe needs to adjust parameters we need to retry the pipe_config computation at the encoder stage. Furthermore we need to inform encoders that they should not increase bandwidth requirements if possible. This is required for the hdmi code, which prefers the pipe to up-dither to either of the two possible hdmi bpc values. LVDS has a similar requirement, although that's probably only theoretical in nature: It's unlikely that we'll ever see an 8bpc high-res lvds panel (which is required to hit the 2 fdi lane limit). eDP is the only thing which could increase the pipe_bpp setting again, even when in the retry-loop. This could hit the WARN. Two reasons for not bothering: - On many eDP panels we'll get a black screen if the bpp settings don't match vbt. So failing the modeset is the right thing to do. But since that also means it's the only way to light up the panel, it should work. So we shouldn't be able to hit this WARN. - There are still opens around the eDP panel handling, and maybe we need additional tricks. Before that happens it's imo no use trying to be too clever. Worst case we just need to kill that WARN or maybe fail the compute config stage if the eDP connector can't get the bpp setting it wants. And since this can only happen with an fdi link in between and so for pch eDP panels it's rather unlikely to blow up, if ever. v2: Rebased on top of a bikeshed from Paulo. v3: Improve commit message around eDP handling with the stuff things with Imre. Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-21 06:00:16 +07:00
int desired_bpp;
bool force_dvi = intel_conn_state->force_audio == HDMI_AUDIO_OFF_DVI;
if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
return false;
pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
pipe_config->has_hdmi_sink = !force_dvi && intel_hdmi->has_hdmi_sink;
if (pipe_config->has_hdmi_sink)
pipe_config->has_infoframe = true;
if (intel_conn_state->broadcast_rgb == INTEL_BROADCAST_RGB_AUTO) {
/* See CEA-861-E - 5.1 Default Encoding Parameters */
pipe_config->limited_color_range =
pipe_config->has_hdmi_sink &&
drm_default_rgb_quant_range(adjusted_mode) ==
HDMI_QUANTIZATION_RANGE_LIMITED;
} else {
pipe_config->limited_color_range =
intel_conn_state->broadcast_rgb == INTEL_BROADCAST_RGB_LIMITED;
}
if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK) {
pipe_config->pixel_multiplier = 2;
clock_8bpc *= 2;
clock_10bpc *= 2;
clock_12bpc *= 2;
}
drm/i915: add config function for YCBCR420 outputs This patch checks encoder level support for YCBCR420 outputs. The logic goes as simple as this: If the input mode is YCBCR420-only mode: prepare HDMI for YCBCR420 output, else continue with RGB output mode. It checks if the mode is YCBCR420 and source can support this output then it marks the ycbcr_420 output indicator into crtc state, for further staging in driver. V2: Split the patch into two, kept helper functions in DRM layer. V3: Changed the compute_config function based on new DRM API. V4: Rebase V5: Rebase V6: Check and handle YCBCR420-only modes, discard the property based approach (Ville) V7: Addressed review comments from Ville - add else case in 12BPC check. - extract ycbcr420 state inside hdmi_12bpc_possible function. V8: Addressed review comments from Ville - Remove extra blank lines. - Remove "HDMI" from the description of ycbcr420 state variable. - Remove local variable, use crtc_state->ycbcr420 instead. Added r-b from Ville. V9: Rebase V10: Added r-b from Imre Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1500650709-14447-2-git-send-email-shashank.sharma@intel.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-21 22:25:04 +07:00
if (drm_mode_is_420_only(&connector->display_info, adjusted_mode)) {
if (!intel_hdmi_ycbcr420_config(connector, pipe_config,
&clock_12bpc, &clock_10bpc,
&clock_8bpc)) {
drm/i915: add config function for YCBCR420 outputs This patch checks encoder level support for YCBCR420 outputs. The logic goes as simple as this: If the input mode is YCBCR420-only mode: prepare HDMI for YCBCR420 output, else continue with RGB output mode. It checks if the mode is YCBCR420 and source can support this output then it marks the ycbcr_420 output indicator into crtc state, for further staging in driver. V2: Split the patch into two, kept helper functions in DRM layer. V3: Changed the compute_config function based on new DRM API. V4: Rebase V5: Rebase V6: Check and handle YCBCR420-only modes, discard the property based approach (Ville) V7: Addressed review comments from Ville - add else case in 12BPC check. - extract ycbcr420 state inside hdmi_12bpc_possible function. V8: Addressed review comments from Ville - Remove extra blank lines. - Remove "HDMI" from the description of ycbcr420 state variable. - Remove local variable, use crtc_state->ycbcr420 instead. Added r-b from Ville. V9: Rebase V10: Added r-b from Imre Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1500650709-14447-2-git-send-email-shashank.sharma@intel.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-21 22:25:04 +07:00
DRM_ERROR("Can't support YCBCR420 output\n");
return false;
}
}
if (HAS_PCH_SPLIT(dev_priv) && !HAS_DDI(dev_priv))
pipe_config->has_pch_encoder = true;
if (pipe_config->has_hdmi_sink) {
if (intel_conn_state->force_audio == HDMI_AUDIO_AUTO)
pipe_config->has_audio = intel_hdmi->has_audio;
else
pipe_config->has_audio =
intel_conn_state->force_audio == HDMI_AUDIO_ON;
}
drm/i915: precompute pipe bpp before touching the hw The procedure has now 3 steps: 1. Compute the bpp that the plane will output, this is done in pipe_config_set_bpp and stored into pipe_config->pipe_bpp. Also, this function clamps the pipe_bpp to whatever limit the EDID of any connected output specifies. 2. Adjust the pipe_bpp in the encoder and crtc functions, according to whatever constraints there are. 3. Decide whether to use dither by comparing the stored plane bpp with computed pipe_bpp. There are a few slight functional changes in this patch: - LVDS connector are now also going through the EDID clamping. But in a 2nd change we now unconditionally force the lvds bpc value - this shouldn't matter in reality when the panel setup is consistent, but better safe than sorry. - HDMI now forces the pipe_bpp to the selected value - I think that's what we actually want, since otherwise at least the pixelclock computations are wrong (I'm not sure whether the port would accept e.g. 10 bpc when in 12bpc mode). Contrary to the old code, we pick the next higher bpc value, since otherwise there's no way to make use of the 12 bpc mode (since the next patch will remove the 12bpc plane format, it doesn't exist). Both of these changes are due to the removal of the pipe_bpp = min(display_bpp, plane_bpp); statement. Another slight change is the reworking of the dp bpc code: - For the mode_valid callback it's sufficient to only check whether the mode would fit at the lowest bpc. - The bandwidth computation code is a bit restructured: It now walks all available bpp values in an outer loop and the codeblock that computes derived values (once a good configuration is found) has been moved out of the for loop maze. This is prep work to allow us to successively fall back on bpc values, and also correctly support bpc values != 8 or 6. v2: Rebased on top of Paulo Zanoni's little refactoring to use more drm dp helper functions. v3: Rebased on top of Jani's eDP bpp fix and Ville's limited color range work. v4: Remove the INTEL_MODE_DP_FORCE_6BPC #define, no longer needed. v5: Remove intel_crtc->bpp, too, and fix up the 12bpc check in the hdmi code. Also fixup the bpp check in intel_dp.c, it'll get reworked in a later patch though again. v6: Fix spelling in a comment. v7: Debug output improvements for the bpp computation. v8: Fixup 6bpc lvds check - dual-link and 8bpc mode are different things! v9: Reinstate the fix to properly ignore the firmware edp bpp ... this was lost in a rebase. v10: Both g4x and vlv lack 12bpc pipes, so don't enforce that we have that. Still unsure whether this is the way to go, but at least 6bpc for a 8bpc hdmi output seems to work. v11: And g4x/vlv also lack 12bpc hdmi support, so only support high depth on DP. Adjust the code. v12: Rebased. v13: Split out the introduction of pipe_config->dither|pipe_bpp, as requested from Jesse Barnes. v14: Split out the special 6BPC handling for DP, as requested by Jesse Barnes. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-27 06:44:58 +07:00
/*
* Note that g4x/vlv don't support 12bpc hdmi outputs. We also need
* to check that the higher clock still fits within limits.
drm/i915: precompute pipe bpp before touching the hw The procedure has now 3 steps: 1. Compute the bpp that the plane will output, this is done in pipe_config_set_bpp and stored into pipe_config->pipe_bpp. Also, this function clamps the pipe_bpp to whatever limit the EDID of any connected output specifies. 2. Adjust the pipe_bpp in the encoder and crtc functions, according to whatever constraints there are. 3. Decide whether to use dither by comparing the stored plane bpp with computed pipe_bpp. There are a few slight functional changes in this patch: - LVDS connector are now also going through the EDID clamping. But in a 2nd change we now unconditionally force the lvds bpc value - this shouldn't matter in reality when the panel setup is consistent, but better safe than sorry. - HDMI now forces the pipe_bpp to the selected value - I think that's what we actually want, since otherwise at least the pixelclock computations are wrong (I'm not sure whether the port would accept e.g. 10 bpc when in 12bpc mode). Contrary to the old code, we pick the next higher bpc value, since otherwise there's no way to make use of the 12 bpc mode (since the next patch will remove the 12bpc plane format, it doesn't exist). Both of these changes are due to the removal of the pipe_bpp = min(display_bpp, plane_bpp); statement. Another slight change is the reworking of the dp bpc code: - For the mode_valid callback it's sufficient to only check whether the mode would fit at the lowest bpc. - The bandwidth computation code is a bit restructured: It now walks all available bpp values in an outer loop and the codeblock that computes derived values (once a good configuration is found) has been moved out of the for loop maze. This is prep work to allow us to successively fall back on bpc values, and also correctly support bpc values != 8 or 6. v2: Rebased on top of Paulo Zanoni's little refactoring to use more drm dp helper functions. v3: Rebased on top of Jani's eDP bpp fix and Ville's limited color range work. v4: Remove the INTEL_MODE_DP_FORCE_6BPC #define, no longer needed. v5: Remove intel_crtc->bpp, too, and fix up the 12bpc check in the hdmi code. Also fixup the bpp check in intel_dp.c, it'll get reworked in a later patch though again. v6: Fix spelling in a comment. v7: Debug output improvements for the bpp computation. v8: Fixup 6bpc lvds check - dual-link and 8bpc mode are different things! v9: Reinstate the fix to properly ignore the firmware edp bpp ... this was lost in a rebase. v10: Both g4x and vlv lack 12bpc pipes, so don't enforce that we have that. Still unsure whether this is the way to go, but at least 6bpc for a 8bpc hdmi output seems to work. v11: And g4x/vlv also lack 12bpc hdmi support, so only support high depth on DP. Adjust the code. v12: Rebased. v13: Split out the introduction of pipe_config->dither|pipe_bpp, as requested from Jesse Barnes. v14: Split out the special 6BPC handling for DP, as requested by Jesse Barnes. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-27 06:44:58 +07:00
*/
if (hdmi_deep_color_possible(pipe_config, 12) &&
hdmi_port_clock_valid(intel_hdmi, clock_12bpc,
true, force_dvi) == MODE_OK) {
drm/i915: implement fdi auto-dithering So on a bunch of setups we only have 2 fdi lanes available, e.g. hsw VGA or 3 pipes on ivb. And seemingly a lot of modes don't quite fit into this, among them the default 1080p mode. The solution is to dither down the pipe a bit so that everything fits, which this patch implements. But ports compute their state under the assumption that the bpp they pick will be the one selected, e.g. the display port bw computations won't work otherwise. Now we could adjust our code to again up-dither to the computed DP link parameters, but that's pointless. So instead when the pipe needs to adjust parameters we need to retry the pipe_config computation at the encoder stage. Furthermore we need to inform encoders that they should not increase bandwidth requirements if possible. This is required for the hdmi code, which prefers the pipe to up-dither to either of the two possible hdmi bpc values. LVDS has a similar requirement, although that's probably only theoretical in nature: It's unlikely that we'll ever see an 8bpc high-res lvds panel (which is required to hit the 2 fdi lane limit). eDP is the only thing which could increase the pipe_bpp setting again, even when in the retry-loop. This could hit the WARN. Two reasons for not bothering: - On many eDP panels we'll get a black screen if the bpp settings don't match vbt. So failing the modeset is the right thing to do. But since that also means it's the only way to light up the panel, it should work. So we shouldn't be able to hit this WARN. - There are still opens around the eDP panel handling, and maybe we need additional tricks. Before that happens it's imo no use trying to be too clever. Worst case we just need to kill that WARN or maybe fail the compute config stage if the eDP connector can't get the bpp setting it wants. And since this can only happen with an fdi link in between and so for pch eDP panels it's rather unlikely to blow up, if ever. v2: Rebased on top of a bikeshed from Paulo. v3: Improve commit message around eDP handling with the stuff things with Imre. Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-21 06:00:16 +07:00
DRM_DEBUG_KMS("picking bpc to 12 for HDMI output\n");
desired_bpp = 12*3;
/* Need to adjust the port link by 1.5x for 12bpc. */
drm/i915: store adjusted dotclock in adjusted_mode->clock ... not the port clock. This allows us to kill the funny semantics around pixel_target_clock. Since the dpll code still needs the real port clock, add a new port_clock field to the pipe configuration. Handling the default case for that one is a bit tricky, since encoders might not consistently overwrite it when retrying the crtc/encoder bw arbitrage step in the compute config stage. Hence we need to always clear port_clock and update it again if the encoder hasn't put in something more specific. This can't be done in one step since the encoder might want to adjust the mode first. I was a bit on the fence whether I should subsume the pixel multiplier handling into the port_clock, too. But then I decided against this since it's on an abstract level still the dotclock of the adjusted mode, and only our hw makes it a bit special due to the separate pixel mulitplier setting (which requires that the dpll runs at the non-multiplied dotclock). So after this patch the adjusted_mode accurately describes the mode we feed into the port, after the panel fitter and pixel multiplier (or line doubling, if we ever bother with that) have done their job. Since the fdi link is between the pfit and the pixel multiplier steps we need to be careful with calculating the fdi link config. v2: Fix up ilk cpu pll handling. v3: Introduce an fdi_dotclock variable in ironlake_fdi_compute_config to make it clearer that we transmit the adjusted_mode without the pixel multiplier taken into account. The old code multiplied the the available link bw with the pixel multiplier, which results in the same fdi configuration, but is much more confusing. v4: Rebase on top of Imre's is_cpu_edp removal. v5: Rebase on top of Paulo's haswell watermark fixes, which introduce a new place which looked at the pixel_clock and so needed conversion. v6: Split out prep patches as requested by Paulo Zanoni. Also rebase on top of the fdi dotclock handling fix in the fdi lanes/bw computation code. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> (v6) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-06-01 22:16:21 +07:00
pipe_config->port_clock = clock_12bpc;
} else if (hdmi_deep_color_possible(pipe_config, 10) &&
hdmi_port_clock_valid(intel_hdmi, clock_10bpc,
true, force_dvi) == MODE_OK) {
DRM_DEBUG_KMS("picking bpc to 10 for HDMI output\n");
desired_bpp = 10 * 3;
/* Need to adjust the port link by 1.25x for 10bpc. */
pipe_config->port_clock = clock_10bpc;
drm/i915: precompute pipe bpp before touching the hw The procedure has now 3 steps: 1. Compute the bpp that the plane will output, this is done in pipe_config_set_bpp and stored into pipe_config->pipe_bpp. Also, this function clamps the pipe_bpp to whatever limit the EDID of any connected output specifies. 2. Adjust the pipe_bpp in the encoder and crtc functions, according to whatever constraints there are. 3. Decide whether to use dither by comparing the stored plane bpp with computed pipe_bpp. There are a few slight functional changes in this patch: - LVDS connector are now also going through the EDID clamping. But in a 2nd change we now unconditionally force the lvds bpc value - this shouldn't matter in reality when the panel setup is consistent, but better safe than sorry. - HDMI now forces the pipe_bpp to the selected value - I think that's what we actually want, since otherwise at least the pixelclock computations are wrong (I'm not sure whether the port would accept e.g. 10 bpc when in 12bpc mode). Contrary to the old code, we pick the next higher bpc value, since otherwise there's no way to make use of the 12 bpc mode (since the next patch will remove the 12bpc plane format, it doesn't exist). Both of these changes are due to the removal of the pipe_bpp = min(display_bpp, plane_bpp); statement. Another slight change is the reworking of the dp bpc code: - For the mode_valid callback it's sufficient to only check whether the mode would fit at the lowest bpc. - The bandwidth computation code is a bit restructured: It now walks all available bpp values in an outer loop and the codeblock that computes derived values (once a good configuration is found) has been moved out of the for loop maze. This is prep work to allow us to successively fall back on bpc values, and also correctly support bpc values != 8 or 6. v2: Rebased on top of Paulo Zanoni's little refactoring to use more drm dp helper functions. v3: Rebased on top of Jani's eDP bpp fix and Ville's limited color range work. v4: Remove the INTEL_MODE_DP_FORCE_6BPC #define, no longer needed. v5: Remove intel_crtc->bpp, too, and fix up the 12bpc check in the hdmi code. Also fixup the bpp check in intel_dp.c, it'll get reworked in a later patch though again. v6: Fix spelling in a comment. v7: Debug output improvements for the bpp computation. v8: Fixup 6bpc lvds check - dual-link and 8bpc mode are different things! v9: Reinstate the fix to properly ignore the firmware edp bpp ... this was lost in a rebase. v10: Both g4x and vlv lack 12bpc pipes, so don't enforce that we have that. Still unsure whether this is the way to go, but at least 6bpc for a 8bpc hdmi output seems to work. v11: And g4x/vlv also lack 12bpc hdmi support, so only support high depth on DP. Adjust the code. v12: Rebased. v13: Split out the introduction of pipe_config->dither|pipe_bpp, as requested from Jesse Barnes. v14: Split out the special 6BPC handling for DP, as requested by Jesse Barnes. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-27 06:44:58 +07:00
} else {
drm/i915: implement fdi auto-dithering So on a bunch of setups we only have 2 fdi lanes available, e.g. hsw VGA or 3 pipes on ivb. And seemingly a lot of modes don't quite fit into this, among them the default 1080p mode. The solution is to dither down the pipe a bit so that everything fits, which this patch implements. But ports compute their state under the assumption that the bpp they pick will be the one selected, e.g. the display port bw computations won't work otherwise. Now we could adjust our code to again up-dither to the computed DP link parameters, but that's pointless. So instead when the pipe needs to adjust parameters we need to retry the pipe_config computation at the encoder stage. Furthermore we need to inform encoders that they should not increase bandwidth requirements if possible. This is required for the hdmi code, which prefers the pipe to up-dither to either of the two possible hdmi bpc values. LVDS has a similar requirement, although that's probably only theoretical in nature: It's unlikely that we'll ever see an 8bpc high-res lvds panel (which is required to hit the 2 fdi lane limit). eDP is the only thing which could increase the pipe_bpp setting again, even when in the retry-loop. This could hit the WARN. Two reasons for not bothering: - On many eDP panels we'll get a black screen if the bpp settings don't match vbt. So failing the modeset is the right thing to do. But since that also means it's the only way to light up the panel, it should work. So we shouldn't be able to hit this WARN. - There are still opens around the eDP panel handling, and maybe we need additional tricks. Before that happens it's imo no use trying to be too clever. Worst case we just need to kill that WARN or maybe fail the compute config stage if the eDP connector can't get the bpp setting it wants. And since this can only happen with an fdi link in between and so for pch eDP panels it's rather unlikely to blow up, if ever. v2: Rebased on top of a bikeshed from Paulo. v3: Improve commit message around eDP handling with the stuff things with Imre. Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-21 06:00:16 +07:00
DRM_DEBUG_KMS("picking bpc to 8 for HDMI output\n");
desired_bpp = 8*3;
pipe_config->port_clock = clock_8bpc;
drm/i915: implement fdi auto-dithering So on a bunch of setups we only have 2 fdi lanes available, e.g. hsw VGA or 3 pipes on ivb. And seemingly a lot of modes don't quite fit into this, among them the default 1080p mode. The solution is to dither down the pipe a bit so that everything fits, which this patch implements. But ports compute their state under the assumption that the bpp they pick will be the one selected, e.g. the display port bw computations won't work otherwise. Now we could adjust our code to again up-dither to the computed DP link parameters, but that's pointless. So instead when the pipe needs to adjust parameters we need to retry the pipe_config computation at the encoder stage. Furthermore we need to inform encoders that they should not increase bandwidth requirements if possible. This is required for the hdmi code, which prefers the pipe to up-dither to either of the two possible hdmi bpc values. LVDS has a similar requirement, although that's probably only theoretical in nature: It's unlikely that we'll ever see an 8bpc high-res lvds panel (which is required to hit the 2 fdi lane limit). eDP is the only thing which could increase the pipe_bpp setting again, even when in the retry-loop. This could hit the WARN. Two reasons for not bothering: - On many eDP panels we'll get a black screen if the bpp settings don't match vbt. So failing the modeset is the right thing to do. But since that also means it's the only way to light up the panel, it should work. So we shouldn't be able to hit this WARN. - There are still opens around the eDP panel handling, and maybe we need additional tricks. Before that happens it's imo no use trying to be too clever. Worst case we just need to kill that WARN or maybe fail the compute config stage if the eDP connector can't get the bpp setting it wants. And since this can only happen with an fdi link in between and so for pch eDP panels it's rather unlikely to blow up, if ever. v2: Rebased on top of a bikeshed from Paulo. v3: Improve commit message around eDP handling with the stuff things with Imre. Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-21 06:00:16 +07:00
}
if (!pipe_config->bw_constrained) {
DRM_DEBUG_KMS("forcing pipe bpp to %i for HDMI\n", desired_bpp);
drm/i915: implement fdi auto-dithering So on a bunch of setups we only have 2 fdi lanes available, e.g. hsw VGA or 3 pipes on ivb. And seemingly a lot of modes don't quite fit into this, among them the default 1080p mode. The solution is to dither down the pipe a bit so that everything fits, which this patch implements. But ports compute their state under the assumption that the bpp they pick will be the one selected, e.g. the display port bw computations won't work otherwise. Now we could adjust our code to again up-dither to the computed DP link parameters, but that's pointless. So instead when the pipe needs to adjust parameters we need to retry the pipe_config computation at the encoder stage. Furthermore we need to inform encoders that they should not increase bandwidth requirements if possible. This is required for the hdmi code, which prefers the pipe to up-dither to either of the two possible hdmi bpc values. LVDS has a similar requirement, although that's probably only theoretical in nature: It's unlikely that we'll ever see an 8bpc high-res lvds panel (which is required to hit the 2 fdi lane limit). eDP is the only thing which could increase the pipe_bpp setting again, even when in the retry-loop. This could hit the WARN. Two reasons for not bothering: - On many eDP panels we'll get a black screen if the bpp settings don't match vbt. So failing the modeset is the right thing to do. But since that also means it's the only way to light up the panel, it should work. So we shouldn't be able to hit this WARN. - There are still opens around the eDP panel handling, and maybe we need additional tricks. Before that happens it's imo no use trying to be too clever. Worst case we just need to kill that WARN or maybe fail the compute config stage if the eDP connector can't get the bpp setting it wants. And since this can only happen with an fdi link in between and so for pch eDP panels it's rather unlikely to blow up, if ever. v2: Rebased on top of a bikeshed from Paulo. v3: Improve commit message around eDP handling with the stuff things with Imre. Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-21 06:00:16 +07:00
pipe_config->pipe_bpp = desired_bpp;
drm/i915: precompute pipe bpp before touching the hw The procedure has now 3 steps: 1. Compute the bpp that the plane will output, this is done in pipe_config_set_bpp and stored into pipe_config->pipe_bpp. Also, this function clamps the pipe_bpp to whatever limit the EDID of any connected output specifies. 2. Adjust the pipe_bpp in the encoder and crtc functions, according to whatever constraints there are. 3. Decide whether to use dither by comparing the stored plane bpp with computed pipe_bpp. There are a few slight functional changes in this patch: - LVDS connector are now also going through the EDID clamping. But in a 2nd change we now unconditionally force the lvds bpc value - this shouldn't matter in reality when the panel setup is consistent, but better safe than sorry. - HDMI now forces the pipe_bpp to the selected value - I think that's what we actually want, since otherwise at least the pixelclock computations are wrong (I'm not sure whether the port would accept e.g. 10 bpc when in 12bpc mode). Contrary to the old code, we pick the next higher bpc value, since otherwise there's no way to make use of the 12 bpc mode (since the next patch will remove the 12bpc plane format, it doesn't exist). Both of these changes are due to the removal of the pipe_bpp = min(display_bpp, plane_bpp); statement. Another slight change is the reworking of the dp bpc code: - For the mode_valid callback it's sufficient to only check whether the mode would fit at the lowest bpc. - The bandwidth computation code is a bit restructured: It now walks all available bpp values in an outer loop and the codeblock that computes derived values (once a good configuration is found) has been moved out of the for loop maze. This is prep work to allow us to successively fall back on bpc values, and also correctly support bpc values != 8 or 6. v2: Rebased on top of Paulo Zanoni's little refactoring to use more drm dp helper functions. v3: Rebased on top of Jani's eDP bpp fix and Ville's limited color range work. v4: Remove the INTEL_MODE_DP_FORCE_6BPC #define, no longer needed. v5: Remove intel_crtc->bpp, too, and fix up the 12bpc check in the hdmi code. Also fixup the bpp check in intel_dp.c, it'll get reworked in a later patch though again. v6: Fix spelling in a comment. v7: Debug output improvements for the bpp computation. v8: Fixup 6bpc lvds check - dual-link and 8bpc mode are different things! v9: Reinstate the fix to properly ignore the firmware edp bpp ... this was lost in a rebase. v10: Both g4x and vlv lack 12bpc pipes, so don't enforce that we have that. Still unsure whether this is the way to go, but at least 6bpc for a 8bpc hdmi output seems to work. v11: And g4x/vlv also lack 12bpc hdmi support, so only support high depth on DP. Adjust the code. v12: Rebased. v13: Split out the introduction of pipe_config->dither|pipe_bpp, as requested from Jesse Barnes. v14: Split out the special 6BPC handling for DP, as requested by Jesse Barnes. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-27 06:44:58 +07:00
}
if (hdmi_port_clock_valid(intel_hdmi, pipe_config->port_clock,
false, force_dvi) != MODE_OK) {
DRM_DEBUG_KMS("unsupported HDMI clock, rejecting mode\n");
return false;
}
/* Set user selected PAR to incoming mode's member */
adjusted_mode->picture_aspect_ratio = conn_state->picture_aspect_ratio;
pipe_config->lane_count = 4;
if (scdc->scrambling.supported && (INTEL_GEN(dev_priv) >= 10 ||
IS_GEMINILAKE(dev_priv))) {
drm/i915: enable scrambling Geminilake platform sports a native HDMI 2.0 controller, and is capable of driving pixel-clocks upto 594Mhz. HDMI 2.0 spec mendates scrambling for these higher clocks, for reduced RF footprint. This patch checks if the monitor supports scrambling, and if required, enables it during the modeset. V2: Addressed review comments from Ville: - Do not track scrambling status in DRM layer, track somewhere in driver like in intel_crtc_state. - Don't talk to monitor at such a low layer, set monitor scrambling in intel_enable_ddi() before enabling the port. V3: Addressed review comments from Jani - In comments, function names, use "sink" instead of "monitor", so that the implementation could be close to the language of HDMI spec. V4: Addressed review comment from Maarten - scrambling -> hdmi_scrambling - high_tmds_clock_ratio -> hdmi_high_tmds_clock_ratio V5: Addressed review comments from Ville and Ander - Do not modifiy the crtc_state after compute_config. Move all scrambling and tmds_clock_ratio calcutations to compute_config. - While setting scrambling for source/sink, do not check the conditions again, just go by the crtc_state flags. This will simplyfy the condition checks. V6: Addressed review comments from Ville - Do not add IS_GLK check in disable/enable function, instead add it in compute_config, while setting state flags. - Remove unnecessary paranthesis. - Simplyfy handle_sink_scrambling function as suggested. - Add readout code for scrambling status in get_ddi_config and add a check for the same in pipe_config_compare. V7: Addressed review comments from Ander/Ville - No separate function for source scrambling, make it inline - Align the last line of the macro TRANS_DDI_HDMI_SCRAMBLING_MASK - Do not add platform check while setting source scrambling - Use pipe_config instead of crtc->config to set sink scrambling - To readout scrambling status, Compare with SCRAMBLING_MASK not any of its bits - Remove platform check in intel_pipe_config_compare while checking scrambling status V8: Fixed mege conflict, Addressed review comments from Ander - Remove the desciption/comment about scrambling fom the caller, move it to the function - Move the IS_GLK check into scrambling function - Fix alignment V9: Fixed review comments from Ville, Ander - Pass the scrambling state variables as bool input to the sink_scrambling function and let the disable call be unconditional. - Fix alignments in function calls and debug messages. - Add kernel doc for function intel_hdmi_handle_sink_scrambling V10: Rebase Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-6-git-send-email-shashank.sharma@intel.com
2017-03-13 18:24:03 +07:00
if (scdc->scrambling.low_rates)
pipe_config->hdmi_scrambling = true;
if (pipe_config->port_clock > 340000) {
pipe_config->hdmi_scrambling = true;
pipe_config->hdmi_high_tmds_clock_ratio = true;
}
}
return true;
}
static void
intel_hdmi_unset_edid(struct drm_connector *connector)
{
struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector);
intel_hdmi->has_hdmi_sink = false;
intel_hdmi->has_audio = false;
intel_hdmi->rgb_quant_range_selectable = false;
drm/i915: Respect DP++ adaptor TMDS clock limit Try to detect the max TMDS clock limit for the DP++ adaptor (if any) and take it into account when checking the port clock. Note that as with the sink (HDMI vs. DVI) TMDS clock limit we'll ignore the adaptor TMDS clock limit in the modeset path, in case users are already "overclocking" their TMDS links. One subtle change here is that we'll have to respect the adaptor TMDS clock limit when we decide whether to do 12bpc or 8bpc, otherwise we might end up picking 12bpc and accidentally driving the TMDS link out of spec even when the user chose a mode that fits wihting the limits at 8bpc. This means you can't "overclock" your DP++ dongle at 12bpc anymore, but you can continue to do so at 8bpc. Note that for simplicity we'll use the I2C access method for all dual mode adaptors including type 2. Otherwise we'd have to start mixing DP AUX and HDMI together. In the future we may need to do that if we come across any board designs that don't hook up the DDC pins to the DP++ connectors. Such boards would obviously only work with type 2 dual mode adaptors, and not type 1. v2: Store adaptor type under indel_hdmi->dp_dual_mode Deal with DRM_DP_DUAL_MODE_UNKNOWN Pass adaptor type to drm_dp_dual_mode_max_tmds_clock(), and use it for type1 adaptors as well Cc: stable@vger.kernel.org Reported-by: Tore Anderson <tore@fud.no> Fixes: 7a0baa623446 ("Revert "drm/i915: Disable 12bpc hdmi for now"") Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1462216105-20881-3-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
2016-05-03 02:08:23 +07:00
intel_hdmi->dp_dual_mode.type = DRM_DP_DUAL_MODE_NONE;
intel_hdmi->dp_dual_mode.max_tmds_clock = 0;
kfree(to_intel_connector(connector)->detect_edid);
to_intel_connector(connector)->detect_edid = NULL;
}
drm/i915: Respect DP++ adaptor TMDS clock limit Try to detect the max TMDS clock limit for the DP++ adaptor (if any) and take it into account when checking the port clock. Note that as with the sink (HDMI vs. DVI) TMDS clock limit we'll ignore the adaptor TMDS clock limit in the modeset path, in case users are already "overclocking" their TMDS links. One subtle change here is that we'll have to respect the adaptor TMDS clock limit when we decide whether to do 12bpc or 8bpc, otherwise we might end up picking 12bpc and accidentally driving the TMDS link out of spec even when the user chose a mode that fits wihting the limits at 8bpc. This means you can't "overclock" your DP++ dongle at 12bpc anymore, but you can continue to do so at 8bpc. Note that for simplicity we'll use the I2C access method for all dual mode adaptors including type 2. Otherwise we'd have to start mixing DP AUX and HDMI together. In the future we may need to do that if we come across any board designs that don't hook up the DDC pins to the DP++ connectors. Such boards would obviously only work with type 2 dual mode adaptors, and not type 1. v2: Store adaptor type under indel_hdmi->dp_dual_mode Deal with DRM_DP_DUAL_MODE_UNKNOWN Pass adaptor type to drm_dp_dual_mode_max_tmds_clock(), and use it for type1 adaptors as well Cc: stable@vger.kernel.org Reported-by: Tore Anderson <tore@fud.no> Fixes: 7a0baa623446 ("Revert "drm/i915: Disable 12bpc hdmi for now"") Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1462216105-20881-3-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
2016-05-03 02:08:23 +07:00
static void
intel_hdmi_dp_dual_mode_detect(struct drm_connector *connector, bool has_edid)
drm/i915: Respect DP++ adaptor TMDS clock limit Try to detect the max TMDS clock limit for the DP++ adaptor (if any) and take it into account when checking the port clock. Note that as with the sink (HDMI vs. DVI) TMDS clock limit we'll ignore the adaptor TMDS clock limit in the modeset path, in case users are already "overclocking" their TMDS links. One subtle change here is that we'll have to respect the adaptor TMDS clock limit when we decide whether to do 12bpc or 8bpc, otherwise we might end up picking 12bpc and accidentally driving the TMDS link out of spec even when the user chose a mode that fits wihting the limits at 8bpc. This means you can't "overclock" your DP++ dongle at 12bpc anymore, but you can continue to do so at 8bpc. Note that for simplicity we'll use the I2C access method for all dual mode adaptors including type 2. Otherwise we'd have to start mixing DP AUX and HDMI together. In the future we may need to do that if we come across any board designs that don't hook up the DDC pins to the DP++ connectors. Such boards would obviously only work with type 2 dual mode adaptors, and not type 1. v2: Store adaptor type under indel_hdmi->dp_dual_mode Deal with DRM_DP_DUAL_MODE_UNKNOWN Pass adaptor type to drm_dp_dual_mode_max_tmds_clock(), and use it for type1 adaptors as well Cc: stable@vger.kernel.org Reported-by: Tore Anderson <tore@fud.no> Fixes: 7a0baa623446 ("Revert "drm/i915: Disable 12bpc hdmi for now"") Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1462216105-20881-3-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
2016-05-03 02:08:23 +07:00
{
struct drm_i915_private *dev_priv = to_i915(connector->dev);
struct intel_hdmi *hdmi = intel_attached_hdmi(connector);
drm/i915: Nuke intel_digital_port->port Remove intel_digital_port->port and replace its users with intel_encoder->port. intel_encoder->port is a superset of intel_digital_port->port, and it works correctly even for MST encoders. v2: Eliminate a few dp_to_dig_port()->base.port cases too (DK) Performed with cocci: @@ @@ struct intel_digital_port { ... - enum port port; ... } @@ struct intel_digital_port *D; expression E; @@ - D->port = E; @@ struct intel_digital_port *D; @@ - D->port + D->base.port @ expression E; @@ ( - dp_to_dig_port(E)->port + dp_to_dig_port(E)->base.port | - enc_to_dig_port(E)->port + to_intel_encoder(E)->port ) @@ expression E; @@ - to_intel_encoder(&E->base) + E @@ struct intel_digital_port *D; identifier I, M; @@ I = &D->base <... ( - D->base.M + I->M | - &D->base + I ) ...> @@ identifier D; expression E; identifier M; @@ D = enc_to_dig_port(&E->base) <... ( - D->base.M + E->M | - &D->base + E ) ...> @@ identifier D, DP; expression E; identifier M; @@ DP = enc_to_intel_dp(&E->base) <... ( - dp_to_dig_port(DP)->base.M + E->M | - &dp_to_dig_port(DP)->base + E ) ...> @@ expression E; identifier M; @@ ( - enc_to_dig_port(&E->base)->base.M + E->M | - enc_to_dig_port(&E->base)->base + E | - enc_to_mst(&E->base)->primary->base.port + E->port ) @@ expression E; identifier D; @@ - struct intel_digital_port *D = E; ... when != D Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171109152434.32074-1-ville.syrjala@linux.intel.com
2017-11-09 22:24:34 +07:00
enum port port = hdmi_to_dig_port(hdmi)->base.port;
drm/i915: Respect DP++ adaptor TMDS clock limit Try to detect the max TMDS clock limit for the DP++ adaptor (if any) and take it into account when checking the port clock. Note that as with the sink (HDMI vs. DVI) TMDS clock limit we'll ignore the adaptor TMDS clock limit in the modeset path, in case users are already "overclocking" their TMDS links. One subtle change here is that we'll have to respect the adaptor TMDS clock limit when we decide whether to do 12bpc or 8bpc, otherwise we might end up picking 12bpc and accidentally driving the TMDS link out of spec even when the user chose a mode that fits wihting the limits at 8bpc. This means you can't "overclock" your DP++ dongle at 12bpc anymore, but you can continue to do so at 8bpc. Note that for simplicity we'll use the I2C access method for all dual mode adaptors including type 2. Otherwise we'd have to start mixing DP AUX and HDMI together. In the future we may need to do that if we come across any board designs that don't hook up the DDC pins to the DP++ connectors. Such boards would obviously only work with type 2 dual mode adaptors, and not type 1. v2: Store adaptor type under indel_hdmi->dp_dual_mode Deal with DRM_DP_DUAL_MODE_UNKNOWN Pass adaptor type to drm_dp_dual_mode_max_tmds_clock(), and use it for type1 adaptors as well Cc: stable@vger.kernel.org Reported-by: Tore Anderson <tore@fud.no> Fixes: 7a0baa623446 ("Revert "drm/i915: Disable 12bpc hdmi for now"") Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1462216105-20881-3-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
2016-05-03 02:08:23 +07:00
struct i2c_adapter *adapter =
intel_gmbus_get_adapter(dev_priv, hdmi->ddc_bus);
enum drm_dp_dual_mode_type type = drm_dp_dual_mode_detect(adapter);
/*
* Type 1 DVI adaptors are not required to implement any
* registers, so we can't always detect their presence.
* Ideally we should be able to check the state of the
* CONFIG1 pin, but no such luck on our hardware.
*
* The only method left to us is to check the VBT to see
* if the port is a dual mode capable DP port. But let's
* only do that when we sucesfully read the EDID, to avoid
* confusing log messages about DP dual mode adaptors when
* there's nothing connected to the port.
*/
if (type == DRM_DP_DUAL_MODE_UNKNOWN) {
/* An overridden EDID imply that we want this port for testing.
* Make sure not to set limits for that port.
*/
if (has_edid && !connector->override_edid &&
intel_bios_is_port_dp_dual_mode(dev_priv, port)) {
DRM_DEBUG_KMS("Assuming DP dual mode adaptor presence based on VBT\n");
type = DRM_DP_DUAL_MODE_TYPE1_DVI;
} else {
type = DRM_DP_DUAL_MODE_NONE;
}
}
if (type == DRM_DP_DUAL_MODE_NONE)
drm/i915: Respect DP++ adaptor TMDS clock limit Try to detect the max TMDS clock limit for the DP++ adaptor (if any) and take it into account when checking the port clock. Note that as with the sink (HDMI vs. DVI) TMDS clock limit we'll ignore the adaptor TMDS clock limit in the modeset path, in case users are already "overclocking" their TMDS links. One subtle change here is that we'll have to respect the adaptor TMDS clock limit when we decide whether to do 12bpc or 8bpc, otherwise we might end up picking 12bpc and accidentally driving the TMDS link out of spec even when the user chose a mode that fits wihting the limits at 8bpc. This means you can't "overclock" your DP++ dongle at 12bpc anymore, but you can continue to do so at 8bpc. Note that for simplicity we'll use the I2C access method for all dual mode adaptors including type 2. Otherwise we'd have to start mixing DP AUX and HDMI together. In the future we may need to do that if we come across any board designs that don't hook up the DDC pins to the DP++ connectors. Such boards would obviously only work with type 2 dual mode adaptors, and not type 1. v2: Store adaptor type under indel_hdmi->dp_dual_mode Deal with DRM_DP_DUAL_MODE_UNKNOWN Pass adaptor type to drm_dp_dual_mode_max_tmds_clock(), and use it for type1 adaptors as well Cc: stable@vger.kernel.org Reported-by: Tore Anderson <tore@fud.no> Fixes: 7a0baa623446 ("Revert "drm/i915: Disable 12bpc hdmi for now"") Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1462216105-20881-3-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
2016-05-03 02:08:23 +07:00
return;
hdmi->dp_dual_mode.type = type;
hdmi->dp_dual_mode.max_tmds_clock =
drm_dp_dual_mode_max_tmds_clock(type, adapter);
DRM_DEBUG_KMS("DP dual mode adaptor (%s) detected (max TMDS clock: %d kHz)\n",
drm_dp_get_dual_mode_type_name(type),
hdmi->dp_dual_mode.max_tmds_clock);
}
static bool
intel_hdmi_set_edid(struct drm_connector *connector)
{
struct drm_i915_private *dev_priv = to_i915(connector->dev);
struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector);
struct edid *edid;
bool connected = false;
struct i2c_adapter *i2c;
intel_display_power_get(dev_priv, POWER_DOMAIN_GMBUS);
i2c = intel_gmbus_get_adapter(dev_priv, intel_hdmi->ddc_bus);
edid = drm_get_edid(connector, i2c);
if (!edid && !intel_gmbus_is_forced_bit(i2c)) {
DRM_DEBUG_KMS("HDMI GMBUS EDID read failed, retry using GPIO bit-banging\n");
intel_gmbus_force_bit(i2c, true);
edid = drm_get_edid(connector, i2c);
intel_gmbus_force_bit(i2c, false);
}
intel_hdmi_dp_dual_mode_detect(connector, edid != NULL);
drm/i915: Respect DP++ adaptor TMDS clock limit Try to detect the max TMDS clock limit for the DP++ adaptor (if any) and take it into account when checking the port clock. Note that as with the sink (HDMI vs. DVI) TMDS clock limit we'll ignore the adaptor TMDS clock limit in the modeset path, in case users are already "overclocking" their TMDS links. One subtle change here is that we'll have to respect the adaptor TMDS clock limit when we decide whether to do 12bpc or 8bpc, otherwise we might end up picking 12bpc and accidentally driving the TMDS link out of spec even when the user chose a mode that fits wihting the limits at 8bpc. This means you can't "overclock" your DP++ dongle at 12bpc anymore, but you can continue to do so at 8bpc. Note that for simplicity we'll use the I2C access method for all dual mode adaptors including type 2. Otherwise we'd have to start mixing DP AUX and HDMI together. In the future we may need to do that if we come across any board designs that don't hook up the DDC pins to the DP++ connectors. Such boards would obviously only work with type 2 dual mode adaptors, and not type 1. v2: Store adaptor type under indel_hdmi->dp_dual_mode Deal with DRM_DP_DUAL_MODE_UNKNOWN Pass adaptor type to drm_dp_dual_mode_max_tmds_clock(), and use it for type1 adaptors as well Cc: stable@vger.kernel.org Reported-by: Tore Anderson <tore@fud.no> Fixes: 7a0baa623446 ("Revert "drm/i915: Disable 12bpc hdmi for now"") Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1462216105-20881-3-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
2016-05-03 02:08:23 +07:00
intel_display_power_put(dev_priv, POWER_DOMAIN_GMBUS);
to_intel_connector(connector)->detect_edid = edid;
if (edid && edid->input & DRM_EDID_INPUT_DIGITAL) {
intel_hdmi->rgb_quant_range_selectable =
drm_rgb_quant_range_selectable(edid);
intel_hdmi->has_audio = drm_detect_monitor_audio(edid);
intel_hdmi->has_hdmi_sink = drm_detect_hdmi_monitor(edid);
connected = true;
}
cec_notifier_set_phys_addr_from_edid(intel_hdmi->cec_notifier, edid);
return connected;
}
static enum drm_connector_status
intel_hdmi_detect(struct drm_connector *connector, bool force)
{
drm/i915/icl: implement the tc/legacy HPD {dis,}connect flows Unlike the other ports, TC ports are not available to use as soon as we get a hotplug. The TC PHYs can be shared between multiple controllers: display, USB, etc. As a result, handshaking through FIA is required around connect and disconnect to cleanly transfer ownership with the controller and set the type-C power state. This patch implements the flow sequences described by our specification. We opt to grab ownership of the ports as soon as we get the hotplugs in order to simplify the interactions and avoid surprises in the user space side. We may consider changing this in the future, once we improve our testing capabilities on this area. v2: * This unifies the DP and HDMI patches so we can discuss everything at once so people looking at random single patches can actually understand the direction. * I found out the spec was updated a while ago. There's a small difference in the connect flow and the patch was updated for that. * Our spec also now gives a good explanation on what is really happening. As a result, comments were added. * Add some more comments as requested by Rodrigo (Rodrigo). v3: * Downgrade a DRM_ERROR that shouldn't ever happen but we can't act on in case it does (Chris). BSpec: 21750, 4250. Cc: Animesh Manna <animesh.manna@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180801173441.9789-1-paulo.r.zanoni@intel.com
2018-08-02 00:34:41 +07:00
enum drm_connector_status status = connector_status_disconnected;
struct drm_i915_private *dev_priv = to_i915(connector->dev);
struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector);
drm/i915/icl: implement the tc/legacy HPD {dis,}connect flows Unlike the other ports, TC ports are not available to use as soon as we get a hotplug. The TC PHYs can be shared between multiple controllers: display, USB, etc. As a result, handshaking through FIA is required around connect and disconnect to cleanly transfer ownership with the controller and set the type-C power state. This patch implements the flow sequences described by our specification. We opt to grab ownership of the ports as soon as we get the hotplugs in order to simplify the interactions and avoid surprises in the user space side. We may consider changing this in the future, once we improve our testing capabilities on this area. v2: * This unifies the DP and HDMI patches so we can discuss everything at once so people looking at random single patches can actually understand the direction. * I found out the spec was updated a while ago. There's a small difference in the connect flow and the patch was updated for that. * Our spec also now gives a good explanation on what is really happening. As a result, comments were added. * Add some more comments as requested by Rodrigo (Rodrigo). v3: * Downgrade a DRM_ERROR that shouldn't ever happen but we can't act on in case it does (Chris). BSpec: 21750, 4250. Cc: Animesh Manna <animesh.manna@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180801173441.9789-1-paulo.r.zanoni@intel.com
2018-08-02 00:34:41 +07:00
struct intel_encoder *encoder = &hdmi_to_dig_port(intel_hdmi)->base;
DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
connector->base.id, connector->name);
intel_display_power_get(dev_priv, POWER_DOMAIN_GMBUS);
drm/i915/icl: implement the tc/legacy HPD {dis,}connect flows Unlike the other ports, TC ports are not available to use as soon as we get a hotplug. The TC PHYs can be shared between multiple controllers: display, USB, etc. As a result, handshaking through FIA is required around connect and disconnect to cleanly transfer ownership with the controller and set the type-C power state. This patch implements the flow sequences described by our specification. We opt to grab ownership of the ports as soon as we get the hotplugs in order to simplify the interactions and avoid surprises in the user space side. We may consider changing this in the future, once we improve our testing capabilities on this area. v2: * This unifies the DP and HDMI patches so we can discuss everything at once so people looking at random single patches can actually understand the direction. * I found out the spec was updated a while ago. There's a small difference in the connect flow and the patch was updated for that. * Our spec also now gives a good explanation on what is really happening. As a result, comments were added. * Add some more comments as requested by Rodrigo (Rodrigo). v3: * Downgrade a DRM_ERROR that shouldn't ever happen but we can't act on in case it does (Chris). BSpec: 21750, 4250. Cc: Animesh Manna <animesh.manna@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180801173441.9789-1-paulo.r.zanoni@intel.com
2018-08-02 00:34:41 +07:00
if (IS_ICELAKE(dev_priv) &&
!intel_digital_port_connected(encoder))
goto out;
intel_hdmi_unset_edid(connector);
drm/i915: Add hot_plug hook for hdmi encoder This patch adds a separate probe function for HDMI EDID read over DDC channel. This function has been registered as a .hot_plug handler for HDMI encoder. The current implementation of hdmi_detect() function re-sets the cached HDMI edid (in connector->detect_edid) in every detect call.This function gets called many times, sometimes directly from userspace probes, forcing drivers to read EDID every detect function call.This causes several problems like: 1. Race conditions in multiple hot_plug / unplug cases, between interrupts bottom halves and userspace detections. 2. Many Un-necessary EDID reads for single hotplug/unplug 3. HDMI complaince failures which expects only one EDID read per hotplug This function will be serving the purpose of really reading the EDID by really probing the DDC channel, and updating the cached EDID. The plan is to: 1. i915 IRQ handler bottom half function already calls intel_encoder->hotplug() function. Adding This probe function which will read the EDID only in case of a hotplug / unplug. 2. During init_connector this probe will be called to read the edid 3. Reuse the cached EDID in hdmi_detect() function. The "< gen7" check is there because this was tested only for >=gen7 platforms. For older platforms the hotplug/reading edid path remains same. v2: Calling set_edid instead of hdmi_probe during init. Also, for platforms having DDI, intel_encoder for DP and HDMI is same (taken from intel_dig_port), so for DP also, hot_plug function gets called which is not intended here. So, check for HDMI in intel_hdmi_probe Rely on HPD for updating edid only for platforms gen > 8 and also for VLV. v3: Dropping the gen < 8 || !VLV check. Now all platforms should rely on hotplug or init for updating the edid.(Daniel) Also, calling hdmi_probe in init instead of set_edid v4: Renaming intel_hdmi_probe to intel_hdmi_hot_plug. Also calling this hotplug handler from intel_hpd_init to take care of init resume scenarios. v5: Moved the call to encoder hotplug during init to separate patch(Daniel) Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Sonika Jindal <sonika.jindal@intel.com> [danvet: Mark intel_hdmi_hot_plug as static.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-05 18:13:15 +07:00
drm/i915: Stop frobbing with DDI encoder->type Currently the DDI encoder->type will change at runtime depending on what kind of hotplugs we've processed. That's quite bad since we can't really trust that that current value of encoder->type actually matches the type of signal we're trying to drive through it. Let's eliminate that problem by declaring that non-eDP DDI port will always have the encoder type as INTEL_OUTPUT_DDI. This means the code can no longer try to distinguish DP vs. HDMI based on encoder->type. We'll leave eDP as INTEL_OUTPUT_EDP, since it'll never change and there's a bunch of code that relies on that value to identify eDP encoders. We'll introduce a new encoder .compute_output_type() hook. This allows us to compute the full output_types before any encoder .compute_config() hooks get called, thus those hooks can rely on output_types being correct, which is useful for cloning on oldr platforms. For now we'll just look at the connector type and pick the correct mode based on that. In the future the new hook could be used to implement dynamic switching between LS and PCON modes for LSPCON. v2: Fix BXT/GLK PPS explosion with DSI/MST encoders v3: Avoid the PPS warn on pure HDMI/DVI DDI encoders by checking dp.output_reg v4: Rebase v5: Populate output_types in .get_config() rather than in the caller v5: Split out populating output_types in .get_config() (Maarten) Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171027193128.14483-3-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2017-10-28 02:31:24 +07:00
if (intel_hdmi_set_edid(connector))
status = connector_status_connected;
drm/i915/icl: implement the tc/legacy HPD {dis,}connect flows Unlike the other ports, TC ports are not available to use as soon as we get a hotplug. The TC PHYs can be shared between multiple controllers: display, USB, etc. As a result, handshaking through FIA is required around connect and disconnect to cleanly transfer ownership with the controller and set the type-C power state. This patch implements the flow sequences described by our specification. We opt to grab ownership of the ports as soon as we get the hotplugs in order to simplify the interactions and avoid surprises in the user space side. We may consider changing this in the future, once we improve our testing capabilities on this area. v2: * This unifies the DP and HDMI patches so we can discuss everything at once so people looking at random single patches can actually understand the direction. * I found out the spec was updated a while ago. There's a small difference in the connect flow and the patch was updated for that. * Our spec also now gives a good explanation on what is really happening. As a result, comments were added. * Add some more comments as requested by Rodrigo (Rodrigo). v3: * Downgrade a DRM_ERROR that shouldn't ever happen but we can't act on in case it does (Chris). BSpec: 21750, 4250. Cc: Animesh Manna <animesh.manna@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180801173441.9789-1-paulo.r.zanoni@intel.com
2018-08-02 00:34:41 +07:00
out:
intel_display_power_put(dev_priv, POWER_DOMAIN_GMBUS);
if (status != connector_status_connected)
cec_notifier_phys_addr_invalidate(intel_hdmi->cec_notifier);
return status;
}
static void
intel_hdmi_force(struct drm_connector *connector)
{
DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
connector->base.id, connector->name);
intel_hdmi_unset_edid(connector);
if (connector->status != connector_status_connected)
return;
intel_hdmi_set_edid(connector);
}
static int intel_hdmi_get_modes(struct drm_connector *connector)
{
struct edid *edid;
edid = to_intel_connector(connector)->detect_edid;
if (edid == NULL)
return 0;
return intel_connector_update_modes(connector, edid);
}
static void intel_hdmi_pre_enable(struct intel_encoder *encoder,
const struct intel_crtc_state *pipe_config,
const struct drm_connector_state *conn_state)
{
struct intel_digital_port *intel_dig_port =
enc_to_dig_port(&encoder->base);
intel_hdmi_prepare(encoder, pipe_config);
intel_dig_port->set_infoframes(encoder,
pipe_config->has_infoframe,
pipe_config, conn_state);
}
static void vlv_hdmi_pre_enable(struct intel_encoder *encoder,
const struct intel_crtc_state *pipe_config,
const struct drm_connector_state *conn_state)
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 04:51:36 +07:00
{
struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
vlv_phy_pre_encoder_enable(encoder, pipe_config);
/* HDMI 1.0V-2dB */
vlv_set_phy_signal_level(encoder, 0x2b245f5f, 0x00002000, 0x5578b83a,
0x2b247878);
dport->set_infoframes(encoder,
pipe_config->has_infoframe,
pipe_config, conn_state);
g4x_enable_hdmi(encoder, pipe_config, conn_state);
vlv_wait_port_ready(dev_priv, dport, 0x0);
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 04:51:36 +07:00
}
static void vlv_hdmi_pre_pll_enable(struct intel_encoder *encoder,
const struct intel_crtc_state *pipe_config,
const struct drm_connector_state *conn_state)
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 04:51:36 +07:00
{
intel_hdmi_prepare(encoder, pipe_config);
vlv_phy_pre_pll_enable(encoder, pipe_config);
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 04:51:36 +07:00
}
static void chv_hdmi_pre_pll_enable(struct intel_encoder *encoder,
const struct intel_crtc_state *pipe_config,
const struct drm_connector_state *conn_state)
{
intel_hdmi_prepare(encoder, pipe_config);
chv_phy_pre_pll_enable(encoder, pipe_config);
}
static void chv_hdmi_post_pll_disable(struct intel_encoder *encoder,
const struct intel_crtc_state *old_crtc_state,
const struct drm_connector_state *old_conn_state)
{
chv_phy_post_pll_disable(encoder, old_crtc_state);
}
static void vlv_hdmi_post_disable(struct intel_encoder *encoder,
const struct intel_crtc_state *old_crtc_state,
const struct drm_connector_state *old_conn_state)
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 04:51:36 +07:00
{
/* Reset lanes to avoid HDMI flicker (VLV w/a) */
vlv_phy_reset_lanes(encoder, old_crtc_state);
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 04:51:36 +07:00
}
static void chv_hdmi_post_disable(struct intel_encoder *encoder,
const struct intel_crtc_state *old_crtc_state,
const struct drm_connector_state *old_conn_state)
{
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
mutex_lock(&dev_priv->sb_lock);
/* Assert data lane reset */
chv_data_lane_soft_reset(encoder, old_crtc_state, true);
mutex_unlock(&dev_priv->sb_lock);
}
static void chv_hdmi_pre_enable(struct intel_encoder *encoder,
const struct intel_crtc_state *pipe_config,
const struct drm_connector_state *conn_state)
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 17:28:20 +07:00
{
struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
chv_phy_pre_encoder_enable(encoder, pipe_config);
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 17:28:20 +07:00
/* FIXME: Program the support xxx V-dB */
/* Use 800mV-0dB */
chv_set_phy_signal_level(encoder, 128, 102, false);
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 17:28:20 +07:00
dport->set_infoframes(encoder,
pipe_config->has_infoframe,
pipe_config, conn_state);
g4x_enable_hdmi(encoder, pipe_config, conn_state);
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 17:28:20 +07:00
vlv_wait_port_ready(dev_priv, dport, 0x0);
drm/i915: Trick CL2 into life on CHV when using pipe B with port B Normmally the common lane in a PHY channel gets powered up when some of the data lanes get powered up. But when we're driving port B with pipe B we don't want to enabled any of the data lanes, and just want the DPLL in the common lane to be active. To make that happens we have to temporarily enable some data lanes after which we can access the DPLL registers in the common lane. Once the pipe is up and running we can drop the power override on the data lanes allowing them to shut down. From this point forward the common lane will in fact stay powered on until the data lanes in the other channel get powered down. Ville's extended explanation from the review thread: On Wed, Aug 19, 2015 at 07:47:41AM +0530, Deepak wrote: > One Q, why only for port B? Port C is also in same common lane right? Port B is in the first PHY channel which also houses CL1. CL1 always powers up whenever any lanes in either PHY channel are powered up. CL2 only powers up if lanes in the second channel (ie. the one with port C) powers up. So in this scenario (pipe B->port B) we want the DPLL from CL2, but ideally we only want to power up the lanes for port B. Powering up port B lanes will only power up CL1, but as we need CL2 instead we need to, temporarily, power up some lanes in port C as well. Crossing the streams the other way (pipe A->port C) is not a problem since CL1 powers up whenever anything else powers up. So powering up some port C lanes is enough on its own to make the CL1 DPLL operational, even though CL1 and the lanes live in separate channels. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Deepak S <deepak.s@linux.intel.com> [danvet: Amend commit message with extended explanation.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-09 03:45:55 +07:00
/* Second common lane will stay alive on its own now */
chv_phy_release_cl2_override(encoder);
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 17:28:20 +07:00
}
static void intel_hdmi_destroy(struct drm_connector *connector)
{
if (intel_attached_hdmi(connector)->cec_notifier)
cec_notifier_put(intel_attached_hdmi(connector)->cec_notifier);
intel_connector_destroy(connector);
}
static const struct drm_connector_funcs intel_hdmi_connector_funcs = {
.detect = intel_hdmi_detect,
.force = intel_hdmi_force,
.fill_modes = drm_helper_probe_single_connector_modes,
.atomic_get_property = intel_digital_connector_atomic_get_property,
.atomic_set_property = intel_digital_connector_atomic_set_property,
.late_register = intel_connector_register,
.early_unregister = intel_connector_unregister,
.destroy = intel_hdmi_destroy,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
.atomic_duplicate_state = intel_digital_connector_duplicate_state,
};
static const struct drm_connector_helper_funcs intel_hdmi_connector_helper_funcs = {
.get_modes = intel_hdmi_get_modes,
.mode_valid = intel_hdmi_mode_valid,
.atomic_check = intel_digital_connector_atomic_check,
};
static const struct drm_encoder_funcs intel_hdmi_enc_funcs = {
.destroy = intel_encoder_destroy,
};
static void
intel_hdmi_add_properties(struct intel_hdmi *intel_hdmi, struct drm_connector *connector)
{
intel_attach_force_audio_property(connector);
intel_attach_broadcast_rgb_property(connector);
intel_attach_aspect_ratio_property(connector);
i915: content-type property for HDMI connector Added encoding of drm content_type property from drm_connector_state within AVI infoframe in order to properly handle external HDMI TV content-type setting. This requires also manipulationg ITC bit, as stated in HDMI spec. v2: * Moved helper function which attaches content type property to the drm core, as was suggested. Removed redundant connector state initialization. v3: * Removed caps in drm_content_type_enum_list. After some discussion it turned out that HDMI Spec 1.4 was wrongly assuming that IT Content(itc) bit doesn't affect Content type states, however itc bit needs to be manupulated as well. In order to not expose additional property for itc, for sake of simplicity it was decided to bind those together in same "content type" property. v4: * Added it_content checking in intel_digital_connector_atomic_check. Fixed documentation for new content type enum. v5: * Moved patch revision's description to commit messages. v6: * Minor naming fix for the content type enumeration string. v7: * Fix parameter name for documentation and parameter alignment in order not to get warning. Added Content Type description to new HDMI connector properties section. v8: * Thrown away unneeded numbers from HDMI content-type property description. Switch to strings desription instead of plain definitions. v9: * Moved away hdmi specific content-type enum from drm_connector_state. Content type property should probably not be bound to any specific connector interface in drm_connector_state. Same probably should be done to hdmi_picture_aspect_ration enum which is also contained in drm_connector_state. Added special helper function to get derive hdmi specific relevant infoframe fields. v10: * Added usage description to HDMI properties kernel doc. v11: * Created centralized function for filling HDMI AVI infoframe, based on correspondent DRM property value. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180515135928.31092-3-stanislav.lisovskiy@intel.com [vsyrjala: clean up checkpatch multiple blank lines warnings] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2018-05-15 20:59:28 +07:00
drm_connector_attach_content_type_property(connector);
connector->state->picture_aspect_ratio = HDMI_PICTURE_ASPECT_NONE;
}
drm/i915: enable scrambling Geminilake platform sports a native HDMI 2.0 controller, and is capable of driving pixel-clocks upto 594Mhz. HDMI 2.0 spec mendates scrambling for these higher clocks, for reduced RF footprint. This patch checks if the monitor supports scrambling, and if required, enables it during the modeset. V2: Addressed review comments from Ville: - Do not track scrambling status in DRM layer, track somewhere in driver like in intel_crtc_state. - Don't talk to monitor at such a low layer, set monitor scrambling in intel_enable_ddi() before enabling the port. V3: Addressed review comments from Jani - In comments, function names, use "sink" instead of "monitor", so that the implementation could be close to the language of HDMI spec. V4: Addressed review comment from Maarten - scrambling -> hdmi_scrambling - high_tmds_clock_ratio -> hdmi_high_tmds_clock_ratio V5: Addressed review comments from Ville and Ander - Do not modifiy the crtc_state after compute_config. Move all scrambling and tmds_clock_ratio calcutations to compute_config. - While setting scrambling for source/sink, do not check the conditions again, just go by the crtc_state flags. This will simplyfy the condition checks. V6: Addressed review comments from Ville - Do not add IS_GLK check in disable/enable function, instead add it in compute_config, while setting state flags. - Remove unnecessary paranthesis. - Simplyfy handle_sink_scrambling function as suggested. - Add readout code for scrambling status in get_ddi_config and add a check for the same in pipe_config_compare. V7: Addressed review comments from Ander/Ville - No separate function for source scrambling, make it inline - Align the last line of the macro TRANS_DDI_HDMI_SCRAMBLING_MASK - Do not add platform check while setting source scrambling - Use pipe_config instead of crtc->config to set sink scrambling - To readout scrambling status, Compare with SCRAMBLING_MASK not any of its bits - Remove platform check in intel_pipe_config_compare while checking scrambling status V8: Fixed mege conflict, Addressed review comments from Ander - Remove the desciption/comment about scrambling fom the caller, move it to the function - Move the IS_GLK check into scrambling function - Fix alignment V9: Fixed review comments from Ville, Ander - Pass the scrambling state variables as bool input to the sink_scrambling function and let the disable call be unconditional. - Fix alignments in function calls and debug messages. - Add kernel doc for function intel_hdmi_handle_sink_scrambling V10: Rebase Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-6-git-send-email-shashank.sharma@intel.com
2017-03-13 18:24:03 +07:00
/*
* intel_hdmi_handle_sink_scrambling: handle sink scrambling/clock ratio setup
* @encoder: intel_encoder
* @connector: drm_connector
* @high_tmds_clock_ratio = bool to indicate if the function needs to set
* or reset the high tmds clock ratio for scrambling
* @scrambling: bool to Indicate if the function needs to set or reset
* sink scrambling
*
* This function handles scrambling on HDMI 2.0 capable sinks.
* If required clock rate is > 340 Mhz && scrambling is supported by sink
* it enables scrambling. This should be called before enabling the HDMI
* 2.0 port, as the sink can choose to disable the scrambling if it doesn't
* detect a scrambled clock within 100 ms.
*
* Returns:
* True on success, false on failure.
drm/i915: enable scrambling Geminilake platform sports a native HDMI 2.0 controller, and is capable of driving pixel-clocks upto 594Mhz. HDMI 2.0 spec mendates scrambling for these higher clocks, for reduced RF footprint. This patch checks if the monitor supports scrambling, and if required, enables it during the modeset. V2: Addressed review comments from Ville: - Do not track scrambling status in DRM layer, track somewhere in driver like in intel_crtc_state. - Don't talk to monitor at such a low layer, set monitor scrambling in intel_enable_ddi() before enabling the port. V3: Addressed review comments from Jani - In comments, function names, use "sink" instead of "monitor", so that the implementation could be close to the language of HDMI spec. V4: Addressed review comment from Maarten - scrambling -> hdmi_scrambling - high_tmds_clock_ratio -> hdmi_high_tmds_clock_ratio V5: Addressed review comments from Ville and Ander - Do not modifiy the crtc_state after compute_config. Move all scrambling and tmds_clock_ratio calcutations to compute_config. - While setting scrambling for source/sink, do not check the conditions again, just go by the crtc_state flags. This will simplyfy the condition checks. V6: Addressed review comments from Ville - Do not add IS_GLK check in disable/enable function, instead add it in compute_config, while setting state flags. - Remove unnecessary paranthesis. - Simplyfy handle_sink_scrambling function as suggested. - Add readout code for scrambling status in get_ddi_config and add a check for the same in pipe_config_compare. V7: Addressed review comments from Ander/Ville - No separate function for source scrambling, make it inline - Align the last line of the macro TRANS_DDI_HDMI_SCRAMBLING_MASK - Do not add platform check while setting source scrambling - Use pipe_config instead of crtc->config to set sink scrambling - To readout scrambling status, Compare with SCRAMBLING_MASK not any of its bits - Remove platform check in intel_pipe_config_compare while checking scrambling status V8: Fixed mege conflict, Addressed review comments from Ander - Remove the desciption/comment about scrambling fom the caller, move it to the function - Move the IS_GLK check into scrambling function - Fix alignment V9: Fixed review comments from Ville, Ander - Pass the scrambling state variables as bool input to the sink_scrambling function and let the disable call be unconditional. - Fix alignments in function calls and debug messages. - Add kernel doc for function intel_hdmi_handle_sink_scrambling V10: Rebase Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-6-git-send-email-shashank.sharma@intel.com
2017-03-13 18:24:03 +07:00
*/
bool intel_hdmi_handle_sink_scrambling(struct intel_encoder *encoder,
drm/i915: enable scrambling Geminilake platform sports a native HDMI 2.0 controller, and is capable of driving pixel-clocks upto 594Mhz. HDMI 2.0 spec mendates scrambling for these higher clocks, for reduced RF footprint. This patch checks if the monitor supports scrambling, and if required, enables it during the modeset. V2: Addressed review comments from Ville: - Do not track scrambling status in DRM layer, track somewhere in driver like in intel_crtc_state. - Don't talk to monitor at such a low layer, set monitor scrambling in intel_enable_ddi() before enabling the port. V3: Addressed review comments from Jani - In comments, function names, use "sink" instead of "monitor", so that the implementation could be close to the language of HDMI spec. V4: Addressed review comment from Maarten - scrambling -> hdmi_scrambling - high_tmds_clock_ratio -> hdmi_high_tmds_clock_ratio V5: Addressed review comments from Ville and Ander - Do not modifiy the crtc_state after compute_config. Move all scrambling and tmds_clock_ratio calcutations to compute_config. - While setting scrambling for source/sink, do not check the conditions again, just go by the crtc_state flags. This will simplyfy the condition checks. V6: Addressed review comments from Ville - Do not add IS_GLK check in disable/enable function, instead add it in compute_config, while setting state flags. - Remove unnecessary paranthesis. - Simplyfy handle_sink_scrambling function as suggested. - Add readout code for scrambling status in get_ddi_config and add a check for the same in pipe_config_compare. V7: Addressed review comments from Ander/Ville - No separate function for source scrambling, make it inline - Align the last line of the macro TRANS_DDI_HDMI_SCRAMBLING_MASK - Do not add platform check while setting source scrambling - Use pipe_config instead of crtc->config to set sink scrambling - To readout scrambling status, Compare with SCRAMBLING_MASK not any of its bits - Remove platform check in intel_pipe_config_compare while checking scrambling status V8: Fixed mege conflict, Addressed review comments from Ander - Remove the desciption/comment about scrambling fom the caller, move it to the function - Move the IS_GLK check into scrambling function - Fix alignment V9: Fixed review comments from Ville, Ander - Pass the scrambling state variables as bool input to the sink_scrambling function and let the disable call be unconditional. - Fix alignments in function calls and debug messages. - Add kernel doc for function intel_hdmi_handle_sink_scrambling V10: Rebase Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-6-git-send-email-shashank.sharma@intel.com
2017-03-13 18:24:03 +07:00
struct drm_connector *connector,
bool high_tmds_clock_ratio,
bool scrambling)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
drm/i915: enable scrambling Geminilake platform sports a native HDMI 2.0 controller, and is capable of driving pixel-clocks upto 594Mhz. HDMI 2.0 spec mendates scrambling for these higher clocks, for reduced RF footprint. This patch checks if the monitor supports scrambling, and if required, enables it during the modeset. V2: Addressed review comments from Ville: - Do not track scrambling status in DRM layer, track somewhere in driver like in intel_crtc_state. - Don't talk to monitor at such a low layer, set monitor scrambling in intel_enable_ddi() before enabling the port. V3: Addressed review comments from Jani - In comments, function names, use "sink" instead of "monitor", so that the implementation could be close to the language of HDMI spec. V4: Addressed review comment from Maarten - scrambling -> hdmi_scrambling - high_tmds_clock_ratio -> hdmi_high_tmds_clock_ratio V5: Addressed review comments from Ville and Ander - Do not modifiy the crtc_state after compute_config. Move all scrambling and tmds_clock_ratio calcutations to compute_config. - While setting scrambling for source/sink, do not check the conditions again, just go by the crtc_state flags. This will simplyfy the condition checks. V6: Addressed review comments from Ville - Do not add IS_GLK check in disable/enable function, instead add it in compute_config, while setting state flags. - Remove unnecessary paranthesis. - Simplyfy handle_sink_scrambling function as suggested. - Add readout code for scrambling status in get_ddi_config and add a check for the same in pipe_config_compare. V7: Addressed review comments from Ander/Ville - No separate function for source scrambling, make it inline - Align the last line of the macro TRANS_DDI_HDMI_SCRAMBLING_MASK - Do not add platform check while setting source scrambling - Use pipe_config instead of crtc->config to set sink scrambling - To readout scrambling status, Compare with SCRAMBLING_MASK not any of its bits - Remove platform check in intel_pipe_config_compare while checking scrambling status V8: Fixed mege conflict, Addressed review comments from Ander - Remove the desciption/comment about scrambling fom the caller, move it to the function - Move the IS_GLK check into scrambling function - Fix alignment V9: Fixed review comments from Ville, Ander - Pass the scrambling state variables as bool input to the sink_scrambling function and let the disable call be unconditional. - Fix alignments in function calls and debug messages. - Add kernel doc for function intel_hdmi_handle_sink_scrambling V10: Rebase Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-6-git-send-email-shashank.sharma@intel.com
2017-03-13 18:24:03 +07:00
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
struct drm_scrambling *sink_scrambling =
&connector->display_info.hdmi.scdc.scrambling;
struct i2c_adapter *adapter =
intel_gmbus_get_adapter(dev_priv, intel_hdmi->ddc_bus);
drm/i915: enable scrambling Geminilake platform sports a native HDMI 2.0 controller, and is capable of driving pixel-clocks upto 594Mhz. HDMI 2.0 spec mendates scrambling for these higher clocks, for reduced RF footprint. This patch checks if the monitor supports scrambling, and if required, enables it during the modeset. V2: Addressed review comments from Ville: - Do not track scrambling status in DRM layer, track somewhere in driver like in intel_crtc_state. - Don't talk to monitor at such a low layer, set monitor scrambling in intel_enable_ddi() before enabling the port. V3: Addressed review comments from Jani - In comments, function names, use "sink" instead of "monitor", so that the implementation could be close to the language of HDMI spec. V4: Addressed review comment from Maarten - scrambling -> hdmi_scrambling - high_tmds_clock_ratio -> hdmi_high_tmds_clock_ratio V5: Addressed review comments from Ville and Ander - Do not modifiy the crtc_state after compute_config. Move all scrambling and tmds_clock_ratio calcutations to compute_config. - While setting scrambling for source/sink, do not check the conditions again, just go by the crtc_state flags. This will simplyfy the condition checks. V6: Addressed review comments from Ville - Do not add IS_GLK check in disable/enable function, instead add it in compute_config, while setting state flags. - Remove unnecessary paranthesis. - Simplyfy handle_sink_scrambling function as suggested. - Add readout code for scrambling status in get_ddi_config and add a check for the same in pipe_config_compare. V7: Addressed review comments from Ander/Ville - No separate function for source scrambling, make it inline - Align the last line of the macro TRANS_DDI_HDMI_SCRAMBLING_MASK - Do not add platform check while setting source scrambling - Use pipe_config instead of crtc->config to set sink scrambling - To readout scrambling status, Compare with SCRAMBLING_MASK not any of its bits - Remove platform check in intel_pipe_config_compare while checking scrambling status V8: Fixed mege conflict, Addressed review comments from Ander - Remove the desciption/comment about scrambling fom the caller, move it to the function - Move the IS_GLK check into scrambling function - Fix alignment V9: Fixed review comments from Ville, Ander - Pass the scrambling state variables as bool input to the sink_scrambling function and let the disable call be unconditional. - Fix alignments in function calls and debug messages. - Add kernel doc for function intel_hdmi_handle_sink_scrambling V10: Rebase Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-6-git-send-email-shashank.sharma@intel.com
2017-03-13 18:24:03 +07:00
if (!sink_scrambling->supported)
return true;
drm/i915: enable scrambling Geminilake platform sports a native HDMI 2.0 controller, and is capable of driving pixel-clocks upto 594Mhz. HDMI 2.0 spec mendates scrambling for these higher clocks, for reduced RF footprint. This patch checks if the monitor supports scrambling, and if required, enables it during the modeset. V2: Addressed review comments from Ville: - Do not track scrambling status in DRM layer, track somewhere in driver like in intel_crtc_state. - Don't talk to monitor at such a low layer, set monitor scrambling in intel_enable_ddi() before enabling the port. V3: Addressed review comments from Jani - In comments, function names, use "sink" instead of "monitor", so that the implementation could be close to the language of HDMI spec. V4: Addressed review comment from Maarten - scrambling -> hdmi_scrambling - high_tmds_clock_ratio -> hdmi_high_tmds_clock_ratio V5: Addressed review comments from Ville and Ander - Do not modifiy the crtc_state after compute_config. Move all scrambling and tmds_clock_ratio calcutations to compute_config. - While setting scrambling for source/sink, do not check the conditions again, just go by the crtc_state flags. This will simplyfy the condition checks. V6: Addressed review comments from Ville - Do not add IS_GLK check in disable/enable function, instead add it in compute_config, while setting state flags. - Remove unnecessary paranthesis. - Simplyfy handle_sink_scrambling function as suggested. - Add readout code for scrambling status in get_ddi_config and add a check for the same in pipe_config_compare. V7: Addressed review comments from Ander/Ville - No separate function for source scrambling, make it inline - Align the last line of the macro TRANS_DDI_HDMI_SCRAMBLING_MASK - Do not add platform check while setting source scrambling - Use pipe_config instead of crtc->config to set sink scrambling - To readout scrambling status, Compare with SCRAMBLING_MASK not any of its bits - Remove platform check in intel_pipe_config_compare while checking scrambling status V8: Fixed mege conflict, Addressed review comments from Ander - Remove the desciption/comment about scrambling fom the caller, move it to the function - Move the IS_GLK check into scrambling function - Fix alignment V9: Fixed review comments from Ville, Ander - Pass the scrambling state variables as bool input to the sink_scrambling function and let the disable call be unconditional. - Fix alignments in function calls and debug messages. - Add kernel doc for function intel_hdmi_handle_sink_scrambling V10: Rebase Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-6-git-send-email-shashank.sharma@intel.com
2017-03-13 18:24:03 +07:00
DRM_DEBUG_KMS("[CONNECTOR:%d:%s] scrambling=%s, TMDS bit clock ratio=1/%d\n",
connector->base.id, connector->name,
yesno(scrambling), high_tmds_clock_ratio ? 40 : 10);
drm/i915: enable scrambling Geminilake platform sports a native HDMI 2.0 controller, and is capable of driving pixel-clocks upto 594Mhz. HDMI 2.0 spec mendates scrambling for these higher clocks, for reduced RF footprint. This patch checks if the monitor supports scrambling, and if required, enables it during the modeset. V2: Addressed review comments from Ville: - Do not track scrambling status in DRM layer, track somewhere in driver like in intel_crtc_state. - Don't talk to monitor at such a low layer, set monitor scrambling in intel_enable_ddi() before enabling the port. V3: Addressed review comments from Jani - In comments, function names, use "sink" instead of "monitor", so that the implementation could be close to the language of HDMI spec. V4: Addressed review comment from Maarten - scrambling -> hdmi_scrambling - high_tmds_clock_ratio -> hdmi_high_tmds_clock_ratio V5: Addressed review comments from Ville and Ander - Do not modifiy the crtc_state after compute_config. Move all scrambling and tmds_clock_ratio calcutations to compute_config. - While setting scrambling for source/sink, do not check the conditions again, just go by the crtc_state flags. This will simplyfy the condition checks. V6: Addressed review comments from Ville - Do not add IS_GLK check in disable/enable function, instead add it in compute_config, while setting state flags. - Remove unnecessary paranthesis. - Simplyfy handle_sink_scrambling function as suggested. - Add readout code for scrambling status in get_ddi_config and add a check for the same in pipe_config_compare. V7: Addressed review comments from Ander/Ville - No separate function for source scrambling, make it inline - Align the last line of the macro TRANS_DDI_HDMI_SCRAMBLING_MASK - Do not add platform check while setting source scrambling - Use pipe_config instead of crtc->config to set sink scrambling - To readout scrambling status, Compare with SCRAMBLING_MASK not any of its bits - Remove platform check in intel_pipe_config_compare while checking scrambling status V8: Fixed mege conflict, Addressed review comments from Ander - Remove the desciption/comment about scrambling fom the caller, move it to the function - Move the IS_GLK check into scrambling function - Fix alignment V9: Fixed review comments from Ville, Ander - Pass the scrambling state variables as bool input to the sink_scrambling function and let the disable call be unconditional. - Fix alignments in function calls and debug messages. - Add kernel doc for function intel_hdmi_handle_sink_scrambling V10: Rebase Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-6-git-send-email-shashank.sharma@intel.com
2017-03-13 18:24:03 +07:00
/* Set TMDS bit clock ratio to 1/40 or 1/10, and enable/disable scrambling */
return drm_scdc_set_high_tmds_clock_ratio(adapter,
high_tmds_clock_ratio) &&
drm_scdc_set_scrambling(adapter, scrambling);
drm/i915: enable scrambling Geminilake platform sports a native HDMI 2.0 controller, and is capable of driving pixel-clocks upto 594Mhz. HDMI 2.0 spec mendates scrambling for these higher clocks, for reduced RF footprint. This patch checks if the monitor supports scrambling, and if required, enables it during the modeset. V2: Addressed review comments from Ville: - Do not track scrambling status in DRM layer, track somewhere in driver like in intel_crtc_state. - Don't talk to monitor at such a low layer, set monitor scrambling in intel_enable_ddi() before enabling the port. V3: Addressed review comments from Jani - In comments, function names, use "sink" instead of "monitor", so that the implementation could be close to the language of HDMI spec. V4: Addressed review comment from Maarten - scrambling -> hdmi_scrambling - high_tmds_clock_ratio -> hdmi_high_tmds_clock_ratio V5: Addressed review comments from Ville and Ander - Do not modifiy the crtc_state after compute_config. Move all scrambling and tmds_clock_ratio calcutations to compute_config. - While setting scrambling for source/sink, do not check the conditions again, just go by the crtc_state flags. This will simplyfy the condition checks. V6: Addressed review comments from Ville - Do not add IS_GLK check in disable/enable function, instead add it in compute_config, while setting state flags. - Remove unnecessary paranthesis. - Simplyfy handle_sink_scrambling function as suggested. - Add readout code for scrambling status in get_ddi_config and add a check for the same in pipe_config_compare. V7: Addressed review comments from Ander/Ville - No separate function for source scrambling, make it inline - Align the last line of the macro TRANS_DDI_HDMI_SCRAMBLING_MASK - Do not add platform check while setting source scrambling - Use pipe_config instead of crtc->config to set sink scrambling - To readout scrambling status, Compare with SCRAMBLING_MASK not any of its bits - Remove platform check in intel_pipe_config_compare while checking scrambling status V8: Fixed mege conflict, Addressed review comments from Ander - Remove the desciption/comment about scrambling fom the caller, move it to the function - Move the IS_GLK check into scrambling function - Fix alignment V9: Fixed review comments from Ville, Ander - Pass the scrambling state variables as bool input to the sink_scrambling function and let the disable call be unconditional. - Fix alignments in function calls and debug messages. - Add kernel doc for function intel_hdmi_handle_sink_scrambling V10: Rebase Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-6-git-send-email-shashank.sharma@intel.com
2017-03-13 18:24:03 +07:00
}
static u8 chv_port_to_ddc_pin(struct drm_i915_private *dev_priv, enum port port)
{
u8 ddc_pin;
switch (port) {
case PORT_B:
ddc_pin = GMBUS_PIN_DPB;
break;
case PORT_C:
ddc_pin = GMBUS_PIN_DPC;
break;
case PORT_D:
ddc_pin = GMBUS_PIN_DPD_CHV;
break;
default:
MISSING_CASE(port);
ddc_pin = GMBUS_PIN_DPB;
break;
}
return ddc_pin;
}
static u8 bxt_port_to_ddc_pin(struct drm_i915_private *dev_priv, enum port port)
{
u8 ddc_pin;
switch (port) {
case PORT_B:
ddc_pin = GMBUS_PIN_1_BXT;
break;
case PORT_C:
ddc_pin = GMBUS_PIN_2_BXT;
break;
default:
MISSING_CASE(port);
ddc_pin = GMBUS_PIN_1_BXT;
break;
}
return ddc_pin;
}
static u8 cnp_port_to_ddc_pin(struct drm_i915_private *dev_priv,
enum port port)
{
u8 ddc_pin;
switch (port) {
case PORT_B:
ddc_pin = GMBUS_PIN_1_BXT;
break;
case PORT_C:
ddc_pin = GMBUS_PIN_2_BXT;
break;
case PORT_D:
ddc_pin = GMBUS_PIN_4_CNP;
break;
case PORT_F:
ddc_pin = GMBUS_PIN_3_BXT;
break;
default:
MISSING_CASE(port);
ddc_pin = GMBUS_PIN_1_BXT;
break;
}
return ddc_pin;
}
static u8 icl_port_to_ddc_pin(struct drm_i915_private *dev_priv, enum port port)
{
u8 ddc_pin;
switch (port) {
case PORT_A:
ddc_pin = GMBUS_PIN_1_BXT;
break;
case PORT_B:
ddc_pin = GMBUS_PIN_2_BXT;
break;
case PORT_C:
ddc_pin = GMBUS_PIN_9_TC1_ICP;
break;
case PORT_D:
ddc_pin = GMBUS_PIN_10_TC2_ICP;
break;
case PORT_E:
ddc_pin = GMBUS_PIN_11_TC3_ICP;
break;
case PORT_F:
ddc_pin = GMBUS_PIN_12_TC4_ICP;
break;
default:
MISSING_CASE(port);
ddc_pin = GMBUS_PIN_2_BXT;
break;
}
return ddc_pin;
}
static u8 g4x_port_to_ddc_pin(struct drm_i915_private *dev_priv,
enum port port)
{
u8 ddc_pin;
switch (port) {
case PORT_B:
ddc_pin = GMBUS_PIN_DPB;
break;
case PORT_C:
ddc_pin = GMBUS_PIN_DPC;
break;
case PORT_D:
ddc_pin = GMBUS_PIN_DPD;
break;
default:
MISSING_CASE(port);
ddc_pin = GMBUS_PIN_DPB;
break;
}
return ddc_pin;
}
static u8 intel_hdmi_ddc_pin(struct drm_i915_private *dev_priv,
enum port port)
{
const struct ddi_vbt_port_info *info =
&dev_priv->vbt.ddi_port_info[port];
u8 ddc_pin;
if (info->alternate_ddc_pin) {
DRM_DEBUG_KMS("Using DDC pin 0x%x for port %c (VBT)\n",
info->alternate_ddc_pin, port_name(port));
return info->alternate_ddc_pin;
}
if (IS_CHERRYVIEW(dev_priv))
ddc_pin = chv_port_to_ddc_pin(dev_priv, port);
else if (IS_GEN9_LP(dev_priv))
ddc_pin = bxt_port_to_ddc_pin(dev_priv, port);
else if (HAS_PCH_CNP(dev_priv))
ddc_pin = cnp_port_to_ddc_pin(dev_priv, port);
else if (HAS_PCH_ICP(dev_priv))
ddc_pin = icl_port_to_ddc_pin(dev_priv, port);
else
ddc_pin = g4x_port_to_ddc_pin(dev_priv, port);
DRM_DEBUG_KMS("Using DDC pin 0x%x for port %c (platform default)\n",
ddc_pin, port_name(port));
return ddc_pin;
}
void intel_infoframe_init(struct intel_digital_port *intel_dig_port)
{
struct drm_i915_private *dev_priv =
to_i915(intel_dig_port->base.base.dev);
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
intel_dig_port->write_infoframe = vlv_write_infoframe;
intel_dig_port->set_infoframes = vlv_set_infoframes;
intel_dig_port->infoframe_enabled = vlv_infoframe_enabled;
} else if (IS_G4X(dev_priv)) {
intel_dig_port->write_infoframe = g4x_write_infoframe;
intel_dig_port->set_infoframes = g4x_set_infoframes;
intel_dig_port->infoframe_enabled = g4x_infoframe_enabled;
} else if (HAS_DDI(dev_priv)) {
intel_dig_port->write_infoframe = hsw_write_infoframe;
intel_dig_port->set_infoframes = hsw_set_infoframes;
intel_dig_port->infoframe_enabled = hsw_infoframe_enabled;
} else if (HAS_PCH_IBX(dev_priv)) {
intel_dig_port->write_infoframe = ibx_write_infoframe;
intel_dig_port->set_infoframes = ibx_set_infoframes;
intel_dig_port->infoframe_enabled = ibx_infoframe_enabled;
} else {
intel_dig_port->write_infoframe = cpt_write_infoframe;
intel_dig_port->set_infoframes = cpt_set_infoframes;
intel_dig_port->infoframe_enabled = cpt_infoframe_enabled;
}
}
void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
struct intel_connector *intel_connector)
{
struct drm_connector *connector = &intel_connector->base;
struct intel_hdmi *intel_hdmi = &intel_dig_port->hdmi;
struct intel_encoder *intel_encoder = &intel_dig_port->base;
struct drm_device *dev = intel_encoder->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
drm/i915: Nuke intel_digital_port->port Remove intel_digital_port->port and replace its users with intel_encoder->port. intel_encoder->port is a superset of intel_digital_port->port, and it works correctly even for MST encoders. v2: Eliminate a few dp_to_dig_port()->base.port cases too (DK) Performed with cocci: @@ @@ struct intel_digital_port { ... - enum port port; ... } @@ struct intel_digital_port *D; expression E; @@ - D->port = E; @@ struct intel_digital_port *D; @@ - D->port + D->base.port @ expression E; @@ ( - dp_to_dig_port(E)->port + dp_to_dig_port(E)->base.port | - enc_to_dig_port(E)->port + to_intel_encoder(E)->port ) @@ expression E; @@ - to_intel_encoder(&E->base) + E @@ struct intel_digital_port *D; identifier I, M; @@ I = &D->base <... ( - D->base.M + I->M | - &D->base + I ) ...> @@ identifier D; expression E; identifier M; @@ D = enc_to_dig_port(&E->base) <... ( - D->base.M + E->M | - &D->base + E ) ...> @@ identifier D, DP; expression E; identifier M; @@ DP = enc_to_intel_dp(&E->base) <... ( - dp_to_dig_port(DP)->base.M + E->M | - &dp_to_dig_port(DP)->base + E ) ...> @@ expression E; identifier M; @@ ( - enc_to_dig_port(&E->base)->base.M + E->M | - enc_to_dig_port(&E->base)->base + E | - enc_to_mst(&E->base)->primary->base.port + E->port ) @@ expression E; identifier D; @@ - struct intel_digital_port *D = E; ... when != D Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171109152434.32074-1-ville.syrjala@linux.intel.com
2017-11-09 22:24:34 +07:00
enum port port = intel_encoder->port;
DRM_DEBUG_KMS("Adding HDMI connector on port %c\n",
port_name(port));
if (WARN(intel_dig_port->max_lanes < 4,
"Not enough lanes (%d) for HDMI on port %c\n",
intel_dig_port->max_lanes, port_name(port)))
return;
drm_connector_init(dev, connector, &intel_hdmi_connector_funcs,
DRM_MODE_CONNECTOR_HDMIA);
drm_connector_helper_add(connector, &intel_hdmi_connector_helper_funcs);
connector->interlace_allowed = 1;
connector->doublescan_allowed = 0;
connector->stereo_allowed = 1;
drm/i915: simplify possible_clones computation Intel hw only has one MUX for encoders, so outputs are either not cloneable or all in the same group of cloneable outputs. This neatly simplifies the code and allows us to ditch some ugly if cascades in the dp and hdmi init code (well, we need these if cascades for other stuff still, but that can be taken care of in follow-up patches). Note that this changes two things: - dvo can now be cloned with sdvo, but dvo is gen2 whereas sdvo is gen3+, so no problem. Note that the old code had a bug and didn't allow cloning crt with dvo (but only the other way round). - sdvo-lvds can now be cloned with sdvo-non-tv. Spec says this won't work, but the only reason I've found is that you can't use the panel-fitter (used for lvds upscaling) with anything else. But we don't use the panel fitter for sdvo-lvds. Imo this part of Bspec is a) rather confusing b) mostly as a guideline to implementors (i.e. explicitly stating what is already implicit from the spec, without always going into the details of why). So I think we can ignore this - worst case we'll get a bug report from a user with with sdvo-lvds and sdvo-tmds and have to add that special case back in. Because sdvo lvds is a bit special explain in comments why sdvo LVDS outputs can be cloned, but native LVDS and eDP can't be cloned - we use the panel fitter for the later, but not for sdvo. Note that this also uncoditionally initializes the panel_vdd work used by eDP. Trying to be clever doesn't buy us anything (but strange bugs) and this way we can kill the is_edp check. v2: Incorporate review from Paulo - Add in a missing space. - Pimp comment message to address his concerns. Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-13 01:08:18 +07:00
if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
connector->ycbcr_420_allowed = true;
intel_hdmi->ddc_bus = intel_hdmi_ddc_pin(dev_priv, port);
if (WARN_ON(port == PORT_A))
return;
intel_encoder->hpd_pin = intel_hpd_pin_default(dev_priv, port);
if (HAS_DDI(dev_priv))
intel_connector->get_hw_state = intel_ddi_connector_get_hw_state;
else
intel_connector->get_hw_state = intel_connector_get_hw_state;
intel_hdmi_add_properties(intel_hdmi, connector);
if (is_hdcp_supported(dev_priv, port)) {
int ret = intel_hdcp_init(intel_connector,
&intel_hdmi_hdcp_shim);
if (ret)
DRM_DEBUG_KMS("HDCP init failed, skipping.\n");
}
intel_connector_attach_encoder(intel_connector, intel_encoder);
intel_hdmi->attached_connector = intel_connector;
/* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written
* 0xd. Failure to do so will result in spurious interrupts being
* generated on the port when a cable is not attached.
*/
if (IS_G45(dev_priv)) {
u32 temp = I915_READ(PEG_BAND_GAP_DATA);
I915_WRITE(PEG_BAND_GAP_DATA, (temp & ~0xf) | 0xd);
}
intel_hdmi->cec_notifier = cec_notifier_get_conn(dev->dev,
port_identifier(port));
if (!intel_hdmi->cec_notifier)
DRM_DEBUG_KMS("CEC notifier get failed\n");
}
void intel_hdmi_init(struct drm_i915_private *dev_priv,
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 20:33:26 +07:00
i915_reg_t hdmi_reg, enum port port)
{
struct intel_digital_port *intel_dig_port;
struct intel_encoder *intel_encoder;
struct intel_connector *intel_connector;
intel_dig_port = kzalloc(sizeof(*intel_dig_port), GFP_KERNEL);
if (!intel_dig_port)
return;
intel_connector = intel_connector_alloc();
if (!intel_connector) {
kfree(intel_dig_port);
return;
}
intel_encoder = &intel_dig_port->base;
drm_encoder_init(&dev_priv->drm, &intel_encoder->base,
&intel_hdmi_enc_funcs, DRM_MODE_ENCODER_TMDS,
"HDMI %c", port_name(port));
intel_encoder->hotplug = intel_encoder_hotplug;
intel_encoder->compute_config = intel_hdmi_compute_config;
if (HAS_PCH_SPLIT(dev_priv)) {
intel_encoder->disable = pch_disable_hdmi;
intel_encoder->post_disable = pch_post_disable_hdmi;
} else {
intel_encoder->disable = g4x_disable_hdmi;
}
intel_encoder->get_hw_state = intel_hdmi_get_hw_state;
intel_encoder->get_config = intel_hdmi_get_config;
if (IS_CHERRYVIEW(dev_priv)) {
intel_encoder->pre_pll_enable = chv_hdmi_pre_pll_enable;
drm/i915/chv: Add phy supports for Cherryview Added programming phy layer for CHV based on "Application note for 1273 CHV Display phy". v2: Rebase the code and do some cleanup. v3: Rework based on Ville review. -Fix the macro where the ch info need to swap, and add parens to ? operator. -Fix wrong bit define for DPIO_PCS_SWING_CALC_0 and DPIO_PCS_SWING_CALC_1 and rename for meaningful. -Add some comments for CHV specific DPIO registers. -Change the dp margin registery value to decimal to align with the doc. -Fix the not clearing some value in vlv_dpio_read before write again. -Create new hdmi/dp encoder function for chv instead of share with valleyview. v4: Rebase the code after rename the DPIO registers define and upstream change. Based on Ville review. -For unique transition scale selection, after Ville point out, look like the doc might wrong for the bit 26. Use bit 27 for ch0 and ch1. -Break up some dpio write value into two/three steps for readability. -Remove unrelated change. -Add some shift define for some registers instead just give the hex value. -Fix a bug where write to wrong VLV_TX_DW3. v5: Based on Ville review. - Move tx lane latency optimal setting from chv_dp_pre_pll_enable to chv_pre_enable_dp, and chv_hdmi_pre_pll_enable to chv_hdmi_pre_enable respectively. - Fix typo in one margin_reg_value for DP_TRAIN_VOLTAGE_SWING_400. - Clear DPIO_TX_UNIQ_TRANS_SCALE_EN for DP and HDMI. - Mask the old deemph and swing bits for hdmi. v6: Remove stub for pre_pll_enable for dp and hdmi. Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [vsyrjala: Don't touch panel power sequencing on DP] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-09 17:28:20 +07:00
intel_encoder->pre_enable = chv_hdmi_pre_enable;
intel_encoder->enable = vlv_enable_hdmi;
intel_encoder->post_disable = chv_hdmi_post_disable;
intel_encoder->post_pll_disable = chv_hdmi_post_pll_disable;
} else if (IS_VALLEYVIEW(dev_priv)) {
intel_encoder->pre_pll_enable = vlv_hdmi_pre_pll_enable;
intel_encoder->pre_enable = vlv_hdmi_pre_enable;
intel_encoder->enable = vlv_enable_hdmi;
intel_encoder->post_disable = vlv_hdmi_post_disable;
} else {
intel_encoder->pre_enable = intel_hdmi_pre_enable;
if (HAS_PCH_CPT(dev_priv))
intel_encoder->enable = cpt_enable_hdmi;
else if (HAS_PCH_IBX(dev_priv))
intel_encoder->enable = ibx_enable_hdmi;
else
intel_encoder->enable = g4x_enable_hdmi;
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 04:51:36 +07:00
}
drm/i915/hdmi: convert to encoder->disable/enable I've picked hdmi as the first encoder to convert because it's rather simple: - no cloning possible - no differences between prepare/commit and dpms off/on switching. A few changes are required to do so: - Split up the dpms code into an enable/disable function and wire it up with the intel encoder. - Noop out the existing encoder prepare/commit functions used by the crtc helper - our crtc enable/disable code now calls back into the encoder enable/disable code at the right spot. - Create new helper functions to handle dpms changes. - Add intel_encoder->connectors_active to better track dpms state. Atm this is unused, but it will be useful to correctly disable the entire display pipe for cloned configurations. Also note that for now this is only useful in the dpms code - thanks to the crtc helper's dpms confusion across a modeset operation we can't (yet) rely on this having a sensible value in all circumstances. - Rip out the encoder helper dpms callback, if this is still getting called somewhere we have a bug. The slight issue with that is that the crtc helper abuses dpms off to disable unused functions. Hence we also need to implement a default encoder disable function to do just that with the new encoder->disable callback. - Note that we drop the cpt modeset verification in the commit callback, too. The right place to do this would be in the crtc's enable function, _after_ all the encoders are set up. But because not all encoders are converted yet, we can't do that. Hence disable this check temporarily as a minor concession to bisectability. v2: Squash the dpms mode to only the supported values - connector->dpms is for internal tracking only, we can hence avoid needless state-changes a bit whithout causing harm. v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-30 13:59:56 +07:00
intel_encoder->type = INTEL_OUTPUT_HDMI;
intel_encoder->power_domain = intel_port_to_power_domain(port);
intel_encoder->port = port;
if (IS_CHERRYVIEW(dev_priv)) {
if (port == PORT_D)
intel_encoder->crtc_mask = 1 << 2;
else
intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
} else {
intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
}
intel_encoder->cloneable = 1 << INTEL_OUTPUT_ANALOG;
/*
* BSpec is unclear about HDMI+HDMI cloning on g4x, but it seems
* to work on real hardware. And since g4x can send infoframes to
* only one port anyway, nothing is lost by allowing it.
*/
if (IS_G4X(dev_priv))
intel_encoder->cloneable |= 1 << INTEL_OUTPUT_HDMI;
intel_dig_port->hdmi.hdmi_reg = hdmi_reg;
drm/i915: Type safe register read/write Make I915_READ and I915_WRITE more type safe by wrapping the register offset in a struct. This should eliminate most of the fumbles we've had with misplaced parens. This only takes care of normal mmio registers. We could extend the idea to other register types and define each with its own struct. That way you wouldn't be able to accidentally pass the wrong thing to a specific register access function. The gpio_reg setup is probably the ugliest thing left. But I figure I'd just leave it for now, and wait for some divine inspiration to strike before making it nice. As for the generated code, it's actually a bit better sometimes. Eg. looking at i915_irq_handler(), we can see the following change: lea 0x70024(%rdx,%rax,1),%r9d mov $0x1,%edx - movslq %r9d,%r9 - mov %r9,%rsi - mov %r9,-0x58(%rbp) - callq *0xd8(%rbx) + mov %r9d,%esi + mov %r9d,-0x48(%rbp) callq *0xd8(%rbx) So previously gcc thought the register offset might be signed and decided to sign extend it, just in case. The rest appears to be mostly just minor shuffling of instructions. v2: i915_mmio_reg_{offset,equal,valid}() helpers added s/_REG/_MMIO/ in the register defines mo more switch statements left to worry about ring_emit stuff got sorted in a prep patch cmd parser, lrc context and w/a batch buildup also in prep patch vgpu stuff cleaned up and moved to a prep patch all other unrelated changes split out v3: Rebased due to BXT DSI/BLC, MOCS, etc. v4: Rebased due to churn, s/i915_mmio_reg_t/i915_reg_t/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1447853606-2751-1-git-send-email-ville.syrjala@linux.intel.com
2015-11-18 20:33:26 +07:00
intel_dig_port->dp.output_reg = INVALID_MMIO_REG;
intel_dig_port->max_lanes = 4;
intel_infoframe_init(intel_dig_port);
intel_hdmi_init_connector(intel_dig_port, intel_connector);
}