linux_dsm_epyc7002/drivers/net/wireless/zd1211rw/zd_chip.c

1619 lines
39 KiB
C
Raw Normal View History

/* ZD1211 USB-WLAN driver for Linux
*
* Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de>
* Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org>
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/* This file implements all the hardware specific functions for the ZD1211
* and ZD1211B chips. Support for the ZD1211B was possible after Timothy
* Legge sent me a ZD1211B device. Thank you Tim. -- Uli
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include "zd_def.h"
#include "zd_chip.h"
#include "zd_mac.h"
#include "zd_rf.h"
void zd_chip_init(struct zd_chip *chip,
struct ieee80211_hw *hw,
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
struct usb_interface *intf)
{
memset(chip, 0, sizeof(*chip));
mutex_init(&chip->mutex);
zd_usb_init(&chip->usb, hw, intf);
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
zd_rf_init(&chip->rf);
}
void zd_chip_clear(struct zd_chip *chip)
{
ZD_ASSERT(!mutex_is_locked(&chip->mutex));
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
zd_usb_clear(&chip->usb);
zd_rf_clear(&chip->rf);
mutex_destroy(&chip->mutex);
ZD_MEMCLEAR(chip, sizeof(*chip));
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
}
static int scnprint_mac_oui(struct zd_chip *chip, char *buffer, size_t size)
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
{
u8 *addr = zd_mac_get_perm_addr(zd_chip_to_mac(chip));
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
return scnprintf(buffer, size, "%02x-%02x-%02x",
addr[0], addr[1], addr[2]);
}
/* Prints an identifier line, which will support debugging. */
static int scnprint_id(struct zd_chip *chip, char *buffer, size_t size)
{
int i = 0;
i = scnprintf(buffer, size, "zd1211%s chip ",
zd_chip_is_zd1211b(chip) ? "b" : "");
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
i += zd_usb_scnprint_id(&chip->usb, buffer+i, size-i);
i += scnprintf(buffer+i, size-i, " ");
i += scnprint_mac_oui(chip, buffer+i, size-i);
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
i += scnprintf(buffer+i, size-i, " ");
i += zd_rf_scnprint_id(&chip->rf, buffer+i, size-i);
i += scnprintf(buffer+i, size-i, " pa%1x %c%c%c%c%c", chip->pa_type,
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
chip->patch_cck_gain ? 'g' : '-',
chip->patch_cr157 ? '7' : '-',
chip->patch_6m_band_edge ? '6' : '-',
chip->new_phy_layout ? 'N' : '-',
chip->al2230s_bit ? 'S' : '-');
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
return i;
}
static void print_id(struct zd_chip *chip)
{
char buffer[80];
scnprint_id(chip, buffer, sizeof(buffer));
buffer[sizeof(buffer)-1] = 0;
dev_info(zd_chip_dev(chip), "%s\n", buffer);
}
static zd_addr_t inc_addr(zd_addr_t addr)
{
u16 a = (u16)addr;
/* Control registers use byte addressing, but everything else uses word
* addressing. */
if ((a & 0xf000) == CR_START)
a += 2;
else
a += 1;
return (zd_addr_t)a;
}
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
/* Read a variable number of 32-bit values. Parameter count is not allowed to
* exceed USB_MAX_IOREAD32_COUNT.
*/
int zd_ioread32v_locked(struct zd_chip *chip, u32 *values, const zd_addr_t *addr,
unsigned int count)
{
int r;
int i;
zd_addr_t *a16;
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
u16 *v16;
unsigned int count16;
if (count > USB_MAX_IOREAD32_COUNT)
return -EINVAL;
/* Allocate a single memory block for values and addresses. */
count16 = 2*count;
a16 = (zd_addr_t *) kmalloc(count16 * (sizeof(zd_addr_t) + sizeof(u16)),
GFP_KERNEL);
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
if (!a16) {
dev_dbg_f(zd_chip_dev(chip),
"error ENOMEM in allocation of a16\n");
r = -ENOMEM;
goto out;
}
v16 = (u16 *)(a16 + count16);
for (i = 0; i < count; i++) {
int j = 2*i;
/* We read the high word always first. */
a16[j] = inc_addr(addr[i]);
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
a16[j+1] = addr[i];
}
r = zd_ioread16v_locked(chip, v16, a16, count16);
if (r) {
dev_dbg_f(zd_chip_dev(chip),
"error: zd_ioread16v_locked. Error number %d\n", r);
goto out;
}
for (i = 0; i < count; i++) {
int j = 2*i;
values[i] = (v16[j] << 16) | v16[j+1];
}
out:
kfree((void *)a16);
return r;
}
int _zd_iowrite32v_locked(struct zd_chip *chip, const struct zd_ioreq32 *ioreqs,
unsigned int count)
{
int i, j, r;
struct zd_ioreq16 *ioreqs16;
unsigned int count16;
ZD_ASSERT(mutex_is_locked(&chip->mutex));
if (count == 0)
return 0;
if (count > USB_MAX_IOWRITE32_COUNT)
return -EINVAL;
/* Allocate a single memory block for values and addresses. */
count16 = 2*count;
ioreqs16 = kmalloc(count16 * sizeof(struct zd_ioreq16), GFP_KERNEL);
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
if (!ioreqs16) {
r = -ENOMEM;
dev_dbg_f(zd_chip_dev(chip),
"error %d in ioreqs16 allocation\n", r);
goto out;
}
for (i = 0; i < count; i++) {
j = 2*i;
/* We write the high word always first. */
ioreqs16[j].value = ioreqs[i].value >> 16;
ioreqs16[j].addr = inc_addr(ioreqs[i].addr);
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
ioreqs16[j+1].value = ioreqs[i].value;
ioreqs16[j+1].addr = ioreqs[i].addr;
}
r = zd_usb_iowrite16v(&chip->usb, ioreqs16, count16);
#ifdef DEBUG
if (r) {
dev_dbg_f(zd_chip_dev(chip),
"error %d in zd_usb_write16v\n", r);
}
#endif /* DEBUG */
out:
kfree(ioreqs16);
return r;
}
int zd_iowrite16a_locked(struct zd_chip *chip,
const struct zd_ioreq16 *ioreqs, unsigned int count)
{
int r;
unsigned int i, j, t, max;
ZD_ASSERT(mutex_is_locked(&chip->mutex));
for (i = 0; i < count; i += j + t) {
t = 0;
max = count-i;
if (max > USB_MAX_IOWRITE16_COUNT)
max = USB_MAX_IOWRITE16_COUNT;
for (j = 0; j < max; j++) {
if (!ioreqs[i+j].addr) {
t = 1;
break;
}
}
r = zd_usb_iowrite16v(&chip->usb, &ioreqs[i], j);
if (r) {
dev_dbg_f(zd_chip_dev(chip),
"error zd_usb_iowrite16v. Error number %d\n",
r);
return r;
}
}
return 0;
}
/* Writes a variable number of 32 bit registers. The functions will split
* that in several USB requests. A split can be forced by inserting an IO
* request with an zero address field.
*/
int zd_iowrite32a_locked(struct zd_chip *chip,
const struct zd_ioreq32 *ioreqs, unsigned int count)
{
int r;
unsigned int i, j, t, max;
for (i = 0; i < count; i += j + t) {
t = 0;
max = count-i;
if (max > USB_MAX_IOWRITE32_COUNT)
max = USB_MAX_IOWRITE32_COUNT;
for (j = 0; j < max; j++) {
if (!ioreqs[i+j].addr) {
t = 1;
break;
}
}
r = _zd_iowrite32v_locked(chip, &ioreqs[i], j);
if (r) {
dev_dbg_f(zd_chip_dev(chip),
"error _zd_iowrite32v_locked."
" Error number %d\n", r);
return r;
}
}
return 0;
}
int zd_ioread16(struct zd_chip *chip, zd_addr_t addr, u16 *value)
{
int r;
mutex_lock(&chip->mutex);
r = zd_ioread16_locked(chip, value, addr);
mutex_unlock(&chip->mutex);
return r;
}
int zd_ioread32(struct zd_chip *chip, zd_addr_t addr, u32 *value)
{
int r;
mutex_lock(&chip->mutex);
r = zd_ioread32_locked(chip, value, addr);
mutex_unlock(&chip->mutex);
return r;
}
int zd_iowrite16(struct zd_chip *chip, zd_addr_t addr, u16 value)
{
int r;
mutex_lock(&chip->mutex);
r = zd_iowrite16_locked(chip, value, addr);
mutex_unlock(&chip->mutex);
return r;
}
int zd_iowrite32(struct zd_chip *chip, zd_addr_t addr, u32 value)
{
int r;
mutex_lock(&chip->mutex);
r = zd_iowrite32_locked(chip, value, addr);
mutex_unlock(&chip->mutex);
return r;
}
int zd_ioread32v(struct zd_chip *chip, const zd_addr_t *addresses,
u32 *values, unsigned int count)
{
int r;
mutex_lock(&chip->mutex);
r = zd_ioread32v_locked(chip, values, addresses, count);
mutex_unlock(&chip->mutex);
return r;
}
int zd_iowrite32a(struct zd_chip *chip, const struct zd_ioreq32 *ioreqs,
unsigned int count)
{
int r;
mutex_lock(&chip->mutex);
r = zd_iowrite32a_locked(chip, ioreqs, count);
mutex_unlock(&chip->mutex);
return r;
}
static int read_pod(struct zd_chip *chip, u8 *rf_type)
{
int r;
u32 value;
ZD_ASSERT(mutex_is_locked(&chip->mutex));
r = zd_ioread32_locked(chip, &value, E2P_POD);
if (r)
goto error;
dev_dbg_f(zd_chip_dev(chip), "E2P_POD %#010x\n", value);
/* FIXME: AL2230 handling (Bit 7 in POD) */
*rf_type = value & 0x0f;
chip->pa_type = (value >> 16) & 0x0f;
chip->patch_cck_gain = (value >> 8) & 0x1;
chip->patch_cr157 = (value >> 13) & 0x1;
chip->patch_6m_band_edge = (value >> 21) & 0x1;
chip->new_phy_layout = (value >> 31) & 0x1;
chip->al2230s_bit = (value >> 7) & 0x1;
chip->link_led = ((value >> 4) & 1) ? LED1 : LED2;
chip->supports_tx_led = 1;
if (value & (1 << 24)) { /* LED scenario */
if (value & (1 << 29))
chip->supports_tx_led = 0;
}
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
dev_dbg_f(zd_chip_dev(chip),
"RF %s %#01x PA type %#01x patch CCK %d patch CR157 %d "
"patch 6M %d new PHY %d link LED%d tx led %d\n",
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
zd_rf_name(*rf_type), *rf_type,
chip->pa_type, chip->patch_cck_gain,
chip->patch_cr157, chip->patch_6m_band_edge,
chip->new_phy_layout,
chip->link_led == LED1 ? 1 : 2,
chip->supports_tx_led);
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
return 0;
error:
*rf_type = 0;
chip->pa_type = 0;
chip->patch_cck_gain = 0;
chip->patch_cr157 = 0;
chip->patch_6m_band_edge = 0;
chip->new_phy_layout = 0;
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
return r;
}
/* MAC address: if custom mac addresses are to to be used CR_MAC_ADDR_P1 and
* CR_MAC_ADDR_P2 must be overwritten
*/
int zd_write_mac_addr(struct zd_chip *chip, const u8 *mac_addr)
{
int r;
struct zd_ioreq32 reqs[2] = {
[0] = { .addr = CR_MAC_ADDR_P1 },
[1] = { .addr = CR_MAC_ADDR_P2 },
};
if (mac_addr) {
reqs[0].value = (mac_addr[3] << 24)
| (mac_addr[2] << 16)
| (mac_addr[1] << 8)
| mac_addr[0];
reqs[1].value = (mac_addr[5] << 8)
| mac_addr[4];
dev_dbg_f(zd_chip_dev(chip), "mac addr %pM\n", mac_addr);
} else {
dev_dbg_f(zd_chip_dev(chip), "set NULL mac\n");
}
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
mutex_lock(&chip->mutex);
r = zd_iowrite32a_locked(chip, reqs, ARRAY_SIZE(reqs));
mutex_unlock(&chip->mutex);
return r;
}
int zd_read_regdomain(struct zd_chip *chip, u8 *regdomain)
{
int r;
u32 value;
mutex_lock(&chip->mutex);
r = zd_ioread32_locked(chip, &value, E2P_SUBID);
mutex_unlock(&chip->mutex);
if (r)
return r;
*regdomain = value >> 16;
dev_dbg_f(zd_chip_dev(chip), "regdomain: %#04x\n", *regdomain);
return 0;
}
static int read_values(struct zd_chip *chip, u8 *values, size_t count,
zd_addr_t e2p_addr, u32 guard)
{
int r;
int i;
u32 v;
ZD_ASSERT(mutex_is_locked(&chip->mutex));
for (i = 0;;) {
r = zd_ioread32_locked(chip, &v,
(zd_addr_t)((u16)e2p_addr+i/2));
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
if (r)
return r;
v -= guard;
if (i+4 < count) {
values[i++] = v;
values[i++] = v >> 8;
values[i++] = v >> 16;
values[i++] = v >> 24;
continue;
}
for (;i < count; i++)
values[i] = v >> (8*(i%3));
return 0;
}
}
static int read_pwr_cal_values(struct zd_chip *chip)
{
return read_values(chip, chip->pwr_cal_values,
E2P_CHANNEL_COUNT, E2P_PWR_CAL_VALUE1,
0);
}
static int read_pwr_int_values(struct zd_chip *chip)
{
return read_values(chip, chip->pwr_int_values,
E2P_CHANNEL_COUNT, E2P_PWR_INT_VALUE1,
E2P_PWR_INT_GUARD);
}
static int read_ofdm_cal_values(struct zd_chip *chip)
{
int r;
int i;
static const zd_addr_t addresses[] = {
E2P_36M_CAL_VALUE1,
E2P_48M_CAL_VALUE1,
E2P_54M_CAL_VALUE1,
};
for (i = 0; i < 3; i++) {
r = read_values(chip, chip->ofdm_cal_values[i],
E2P_CHANNEL_COUNT, addresses[i], 0);
if (r)
return r;
}
return 0;
}
static int read_cal_int_tables(struct zd_chip *chip)
{
int r;
r = read_pwr_cal_values(chip);
if (r)
return r;
r = read_pwr_int_values(chip);
if (r)
return r;
r = read_ofdm_cal_values(chip);
if (r)
return r;
return 0;
}
/* phy means physical registers */
int zd_chip_lock_phy_regs(struct zd_chip *chip)
{
int r;
u32 tmp;
ZD_ASSERT(mutex_is_locked(&chip->mutex));
r = zd_ioread32_locked(chip, &tmp, CR_REG1);
if (r) {
dev_err(zd_chip_dev(chip), "error ioread32(CR_REG1): %d\n", r);
return r;
}
tmp &= ~UNLOCK_PHY_REGS;
r = zd_iowrite32_locked(chip, tmp, CR_REG1);
if (r)
dev_err(zd_chip_dev(chip), "error iowrite32(CR_REG1): %d\n", r);
return r;
}
int zd_chip_unlock_phy_regs(struct zd_chip *chip)
{
int r;
u32 tmp;
ZD_ASSERT(mutex_is_locked(&chip->mutex));
r = zd_ioread32_locked(chip, &tmp, CR_REG1);
if (r) {
dev_err(zd_chip_dev(chip),
"error ioread32(CR_REG1): %d\n", r);
return r;
}
tmp |= UNLOCK_PHY_REGS;
r = zd_iowrite32_locked(chip, tmp, CR_REG1);
if (r)
dev_err(zd_chip_dev(chip), "error iowrite32(CR_REG1): %d\n", r);
return r;
}
/* CR157 can be optionally patched by the EEPROM for original ZD1211 */
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
static int patch_cr157(struct zd_chip *chip)
{
int r;
u16 value;
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
if (!chip->patch_cr157)
return 0;
r = zd_ioread16_locked(chip, &value, E2P_PHY_REG);
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
if (r)
return r;
dev_dbg_f(zd_chip_dev(chip), "patching value %x\n", value >> 8);
return zd_iowrite32_locked(chip, value >> 8, CR157);
}
/*
* 6M band edge can be optionally overwritten for certain RF's
* Vendor driver says: for FCC regulation, enabled per HWFeature 6M band edge
* bit (for AL2230, AL2230S)
*/
static int patch_6m_band_edge(struct zd_chip *chip, u8 channel)
{
ZD_ASSERT(mutex_is_locked(&chip->mutex));
if (!chip->patch_6m_band_edge)
return 0;
return zd_rf_patch_6m_band_edge(&chip->rf, channel);
}
/* Generic implementation of 6M band edge patching, used by most RFs via
* zd_rf_generic_patch_6m() */
int zd_chip_generic_patch_6m_band(struct zd_chip *chip, int channel)
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
{
struct zd_ioreq16 ioreqs[] = {
{ CR128, 0x14 }, { CR129, 0x12 }, { CR130, 0x10 },
{ CR47, 0x1e },
};
/* FIXME: Channel 11 is not the edge for all regulatory domains. */
if (channel == 1 || channel == 11)
ioreqs[0].value = 0x12;
dev_dbg_f(zd_chip_dev(chip), "patching for channel %d\n", channel);
return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
}
static int zd1211_hw_reset_phy(struct zd_chip *chip)
{
static const struct zd_ioreq16 ioreqs[] = {
{ CR0, 0x0a }, { CR1, 0x06 }, { CR2, 0x26 },
{ CR3, 0x38 }, { CR4, 0x80 }, { CR9, 0xa0 },
{ CR10, 0x81 }, { CR11, 0x00 }, { CR12, 0x7f },
{ CR13, 0x8c }, { CR14, 0x80 }, { CR15, 0x3d },
{ CR16, 0x20 }, { CR17, 0x1e }, { CR18, 0x0a },
{ CR19, 0x48 }, { CR20, 0x0c }, { CR21, 0x0c },
{ CR22, 0x23 }, { CR23, 0x90 }, { CR24, 0x14 },
{ CR25, 0x40 }, { CR26, 0x10 }, { CR27, 0x19 },
{ CR28, 0x7f }, { CR29, 0x80 }, { CR30, 0x4b },
{ CR31, 0x60 }, { CR32, 0x43 }, { CR33, 0x08 },
{ CR34, 0x06 }, { CR35, 0x0a }, { CR36, 0x00 },
{ CR37, 0x00 }, { CR38, 0x38 }, { CR39, 0x0c },
{ CR40, 0x84 }, { CR41, 0x2a }, { CR42, 0x80 },
{ CR43, 0x10 }, { CR44, 0x12 }, { CR46, 0xff },
{ CR47, 0x1E }, { CR48, 0x26 }, { CR49, 0x5b },
{ CR64, 0xd0 }, { CR65, 0x04 }, { CR66, 0x58 },
{ CR67, 0xc9 }, { CR68, 0x88 }, { CR69, 0x41 },
{ CR70, 0x23 }, { CR71, 0x10 }, { CR72, 0xff },
{ CR73, 0x32 }, { CR74, 0x30 }, { CR75, 0x65 },
{ CR76, 0x41 }, { CR77, 0x1b }, { CR78, 0x30 },
{ CR79, 0x68 }, { CR80, 0x64 }, { CR81, 0x64 },
{ CR82, 0x00 }, { CR83, 0x00 }, { CR84, 0x00 },
{ CR85, 0x02 }, { CR86, 0x00 }, { CR87, 0x00 },
{ CR88, 0xff }, { CR89, 0xfc }, { CR90, 0x00 },
{ CR91, 0x00 }, { CR92, 0x00 }, { CR93, 0x08 },
{ CR94, 0x00 }, { CR95, 0x00 }, { CR96, 0xff },
{ CR97, 0xe7 }, { CR98, 0x00 }, { CR99, 0x00 },
{ CR100, 0x00 }, { CR101, 0xae }, { CR102, 0x02 },
{ CR103, 0x00 }, { CR104, 0x03 }, { CR105, 0x65 },
{ CR106, 0x04 }, { CR107, 0x00 }, { CR108, 0x0a },
{ CR109, 0xaa }, { CR110, 0xaa }, { CR111, 0x25 },
{ CR112, 0x25 }, { CR113, 0x00 }, { CR119, 0x1e },
{ CR125, 0x90 }, { CR126, 0x00 }, { CR127, 0x00 },
{ },
{ CR5, 0x00 }, { CR6, 0x00 }, { CR7, 0x00 },
{ CR8, 0x00 }, { CR9, 0x20 }, { CR12, 0xf0 },
{ CR20, 0x0e }, { CR21, 0x0e }, { CR27, 0x10 },
{ CR44, 0x33 }, { CR47, 0x1E }, { CR83, 0x24 },
{ CR84, 0x04 }, { CR85, 0x00 }, { CR86, 0x0C },
{ CR87, 0x12 }, { CR88, 0x0C }, { CR89, 0x00 },
{ CR90, 0x10 }, { CR91, 0x08 }, { CR93, 0x00 },
{ CR94, 0x01 }, { CR95, 0x00 }, { CR96, 0x50 },
{ CR97, 0x37 }, { CR98, 0x35 }, { CR101, 0x13 },
{ CR102, 0x27 }, { CR103, 0x27 }, { CR104, 0x18 },
{ CR105, 0x12 }, { CR109, 0x27 }, { CR110, 0x27 },
{ CR111, 0x27 }, { CR112, 0x27 }, { CR113, 0x27 },
{ CR114, 0x27 }, { CR115, 0x26 }, { CR116, 0x24 },
{ CR117, 0xfc }, { CR118, 0xfa }, { CR120, 0x4f },
{ CR125, 0xaa }, { CR127, 0x03 }, { CR128, 0x14 },
{ CR129, 0x12 }, { CR130, 0x10 }, { CR131, 0x0C },
{ CR136, 0xdf }, { CR137, 0x40 }, { CR138, 0xa0 },
{ CR139, 0xb0 }, { CR140, 0x99 }, { CR141, 0x82 },
{ CR142, 0x54 }, { CR143, 0x1c }, { CR144, 0x6c },
{ CR147, 0x07 }, { CR148, 0x4c }, { CR149, 0x50 },
{ CR150, 0x0e }, { CR151, 0x18 }, { CR160, 0xfe },
{ CR161, 0xee }, { CR162, 0xaa }, { CR163, 0xfa },
{ CR164, 0xfa }, { CR165, 0xea }, { CR166, 0xbe },
{ CR167, 0xbe }, { CR168, 0x6a }, { CR169, 0xba },
{ CR170, 0xba }, { CR171, 0xba },
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
/* Note: CR204 must lead the CR203 */
{ CR204, 0x7d },
{ },
{ CR203, 0x30 },
};
int r, t;
dev_dbg_f(zd_chip_dev(chip), "\n");
r = zd_chip_lock_phy_regs(chip);
if (r)
goto out;
r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
if (r)
goto unlock;
r = patch_cr157(chip);
unlock:
t = zd_chip_unlock_phy_regs(chip);
if (t && !r)
r = t;
out:
return r;
}
static int zd1211b_hw_reset_phy(struct zd_chip *chip)
{
static const struct zd_ioreq16 ioreqs[] = {
{ CR0, 0x14 }, { CR1, 0x06 }, { CR2, 0x26 },
{ CR3, 0x38 }, { CR4, 0x80 }, { CR9, 0xe0 },
{ CR10, 0x81 },
/* power control { { CR11, 1 << 6 }, */
{ CR11, 0x00 },
{ CR12, 0xf0 }, { CR13, 0x8c }, { CR14, 0x80 },
{ CR15, 0x3d }, { CR16, 0x20 }, { CR17, 0x1e },
{ CR18, 0x0a }, { CR19, 0x48 },
{ CR20, 0x10 }, /* Org:0x0E, ComTrend:RalLink AP */
{ CR21, 0x0e }, { CR22, 0x23 }, { CR23, 0x90 },
{ CR24, 0x14 }, { CR25, 0x40 }, { CR26, 0x10 },
{ CR27, 0x10 }, { CR28, 0x7f }, { CR29, 0x80 },
{ CR30, 0x4b }, /* ASIC/FWT, no jointly decoder */
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
{ CR31, 0x60 }, { CR32, 0x43 }, { CR33, 0x08 },
{ CR34, 0x06 }, { CR35, 0x0a }, { CR36, 0x00 },
{ CR37, 0x00 }, { CR38, 0x38 }, { CR39, 0x0c },
{ CR40, 0x84 }, { CR41, 0x2a }, { CR42, 0x80 },
{ CR43, 0x10 }, { CR44, 0x33 }, { CR46, 0xff },
{ CR47, 0x1E }, { CR48, 0x26 }, { CR49, 0x5b },
{ CR64, 0xd0 }, { CR65, 0x04 }, { CR66, 0x58 },
{ CR67, 0xc9 }, { CR68, 0x88 }, { CR69, 0x41 },
{ CR70, 0x23 }, { CR71, 0x10 }, { CR72, 0xff },
{ CR73, 0x32 }, { CR74, 0x30 }, { CR75, 0x65 },
{ CR76, 0x41 }, { CR77, 0x1b }, { CR78, 0x30 },
{ CR79, 0xf0 }, { CR80, 0x64 }, { CR81, 0x64 },
{ CR82, 0x00 }, { CR83, 0x24 }, { CR84, 0x04 },
{ CR85, 0x00 }, { CR86, 0x0c }, { CR87, 0x12 },
{ CR88, 0x0c }, { CR89, 0x00 }, { CR90, 0x58 },
{ CR91, 0x04 }, { CR92, 0x00 }, { CR93, 0x00 },
{ CR94, 0x01 },
{ CR95, 0x20 }, /* ZD1211B */
{ CR96, 0x50 }, { CR97, 0x37 }, { CR98, 0x35 },
{ CR99, 0x00 }, { CR100, 0x01 }, { CR101, 0x13 },
{ CR102, 0x27 }, { CR103, 0x27 }, { CR104, 0x18 },
{ CR105, 0x12 }, { CR106, 0x04 }, { CR107, 0x00 },
{ CR108, 0x0a }, { CR109, 0x27 }, { CR110, 0x27 },
{ CR111, 0x27 }, { CR112, 0x27 }, { CR113, 0x27 },
{ CR114, 0x27 }, { CR115, 0x26 }, { CR116, 0x24 },
{ CR117, 0xfc }, { CR118, 0xfa }, { CR119, 0x1e },
{ CR125, 0x90 }, { CR126, 0x00 }, { CR127, 0x00 },
{ CR128, 0x14 }, { CR129, 0x12 }, { CR130, 0x10 },
{ CR131, 0x0c }, { CR136, 0xdf }, { CR137, 0xa0 },
{ CR138, 0xa8 }, { CR139, 0xb4 }, { CR140, 0x98 },
{ CR141, 0x82 }, { CR142, 0x53 }, { CR143, 0x1c },
{ CR144, 0x6c }, { CR147, 0x07 }, { CR148, 0x40 },
{ CR149, 0x40 }, /* Org:0x50 ComTrend:RalLink AP */
{ CR150, 0x14 }, /* Org:0x0E ComTrend:RalLink AP */
{ CR151, 0x18 }, { CR159, 0x70 }, { CR160, 0xfe },
{ CR161, 0xee }, { CR162, 0xaa }, { CR163, 0xfa },
{ CR164, 0xfa }, { CR165, 0xea }, { CR166, 0xbe },
{ CR167, 0xbe }, { CR168, 0x6a }, { CR169, 0xba },
{ CR170, 0xba }, { CR171, 0xba },
/* Note: CR204 must lead the CR203 */
{ CR204, 0x7d },
{},
{ CR203, 0x30 },
};
int r, t;
dev_dbg_f(zd_chip_dev(chip), "\n");
r = zd_chip_lock_phy_regs(chip);
if (r)
goto out;
r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
t = zd_chip_unlock_phy_regs(chip);
if (t && !r)
r = t;
out:
return r;
}
static int hw_reset_phy(struct zd_chip *chip)
{
return zd_chip_is_zd1211b(chip) ? zd1211b_hw_reset_phy(chip) :
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
zd1211_hw_reset_phy(chip);
}
static int zd1211_hw_init_hmac(struct zd_chip *chip)
{
static const struct zd_ioreq32 ioreqs[] = {
{ CR_ZD1211_RETRY_MAX, 0x2 },
{ CR_RX_THRESHOLD, 0x000c0640 },
};
dev_dbg_f(zd_chip_dev(chip), "\n");
ZD_ASSERT(mutex_is_locked(&chip->mutex));
return zd_iowrite32a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
}
static int zd1211b_hw_init_hmac(struct zd_chip *chip)
{
static const struct zd_ioreq32 ioreqs[] = {
{ CR_ZD1211B_RETRY_MAX, 0x02020202 },
{ CR_ZD1211B_CWIN_MAX_MIN_AC0, 0x007f003f },
{ CR_ZD1211B_CWIN_MAX_MIN_AC1, 0x007f003f },
{ CR_ZD1211B_CWIN_MAX_MIN_AC2, 0x003f001f },
{ CR_ZD1211B_CWIN_MAX_MIN_AC3, 0x001f000f },
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
{ CR_ZD1211B_AIFS_CTL1, 0x00280028 },
{ CR_ZD1211B_AIFS_CTL2, 0x008C003C },
{ CR_ZD1211B_TXOP, 0x01800824 },
{ CR_RX_THRESHOLD, 0x000c0eff, },
};
dev_dbg_f(zd_chip_dev(chip), "\n");
ZD_ASSERT(mutex_is_locked(&chip->mutex));
return zd_iowrite32a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
}
static int hw_init_hmac(struct zd_chip *chip)
{
int r;
static const struct zd_ioreq32 ioreqs[] = {
{ CR_ACK_TIMEOUT_EXT, 0x20 },
{ CR_ADDA_MBIAS_WARMTIME, 0x30000808 },
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
{ CR_SNIFFER_ON, 0 },
{ CR_RX_FILTER, STA_RX_FILTER },
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
{ CR_GROUP_HASH_P1, 0x00 },
{ CR_GROUP_HASH_P2, 0x80000000 },
{ CR_REG1, 0xa4 },
{ CR_ADDA_PWR_DWN, 0x7f },
{ CR_BCN_PLCP_CFG, 0x00f00401 },
{ CR_PHY_DELAY, 0x00 },
{ CR_ACK_TIMEOUT_EXT, 0x80 },
{ CR_ADDA_PWR_DWN, 0x00 },
{ CR_ACK_TIME_80211, 0x100 },
{ CR_RX_PE_DELAY, 0x70 },
{ CR_PS_CTRL, 0x10000000 },
{ CR_RTS_CTS_RATE, 0x02030203 },
{ CR_AFTER_PNP, 0x1 },
{ CR_WEP_PROTECT, 0x114 },
{ CR_IFS_VALUE, IFS_VALUE_DEFAULT },
{ CR_CAM_MODE, MODE_AP_WDS},
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
};
ZD_ASSERT(mutex_is_locked(&chip->mutex));
r = zd_iowrite32a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
if (r)
return r;
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
return zd_chip_is_zd1211b(chip) ?
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
zd1211b_hw_init_hmac(chip) : zd1211_hw_init_hmac(chip);
}
struct aw_pt_bi {
u32 atim_wnd_period;
u32 pre_tbtt;
u32 beacon_interval;
};
static int get_aw_pt_bi(struct zd_chip *chip, struct aw_pt_bi *s)
{
int r;
static const zd_addr_t aw_pt_bi_addr[] =
{ CR_ATIM_WND_PERIOD, CR_PRE_TBTT, CR_BCN_INTERVAL };
u32 values[3];
r = zd_ioread32v_locked(chip, values, (const zd_addr_t *)aw_pt_bi_addr,
ARRAY_SIZE(aw_pt_bi_addr));
if (r) {
memset(s, 0, sizeof(*s));
return r;
}
s->atim_wnd_period = values[0];
s->pre_tbtt = values[1];
s->beacon_interval = values[2];
return 0;
}
static int set_aw_pt_bi(struct zd_chip *chip, struct aw_pt_bi *s)
{
struct zd_ioreq32 reqs[3];
if (s->beacon_interval <= 5)
s->beacon_interval = 5;
if (s->pre_tbtt < 4 || s->pre_tbtt >= s->beacon_interval)
s->pre_tbtt = s->beacon_interval - 1;
if (s->atim_wnd_period >= s->pre_tbtt)
s->atim_wnd_period = s->pre_tbtt - 1;
reqs[0].addr = CR_ATIM_WND_PERIOD;
reqs[0].value = s->atim_wnd_period;
reqs[1].addr = CR_PRE_TBTT;
reqs[1].value = s->pre_tbtt;
reqs[2].addr = CR_BCN_INTERVAL;
reqs[2].value = s->beacon_interval;
return zd_iowrite32a_locked(chip, reqs, ARRAY_SIZE(reqs));
}
static int set_beacon_interval(struct zd_chip *chip, u32 interval)
{
int r;
struct aw_pt_bi s;
ZD_ASSERT(mutex_is_locked(&chip->mutex));
r = get_aw_pt_bi(chip, &s);
if (r)
return r;
s.beacon_interval = interval;
return set_aw_pt_bi(chip, &s);
}
int zd_set_beacon_interval(struct zd_chip *chip, u32 interval)
{
int r;
mutex_lock(&chip->mutex);
r = set_beacon_interval(chip, interval);
mutex_unlock(&chip->mutex);
return r;
}
static int hw_init(struct zd_chip *chip)
{
int r;
dev_dbg_f(zd_chip_dev(chip), "\n");
ZD_ASSERT(mutex_is_locked(&chip->mutex));
r = hw_reset_phy(chip);
if (r)
return r;
r = hw_init_hmac(chip);
if (r)
return r;
return set_beacon_interval(chip, 100);
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
}
static zd_addr_t fw_reg_addr(struct zd_chip *chip, u16 offset)
{
return (zd_addr_t)((u16)chip->fw_regs_base + offset);
}
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
#ifdef DEBUG
static int dump_cr(struct zd_chip *chip, const zd_addr_t addr,
const char *addr_string)
{
int r;
u32 value;
r = zd_ioread32_locked(chip, &value, addr);
if (r) {
dev_dbg_f(zd_chip_dev(chip),
"error reading %s. Error number %d\n", addr_string, r);
return r;
}
dev_dbg_f(zd_chip_dev(chip), "%s %#010x\n",
addr_string, (unsigned int)value);
return 0;
}
static int test_init(struct zd_chip *chip)
{
int r;
r = dump_cr(chip, CR_AFTER_PNP, "CR_AFTER_PNP");
if (r)
return r;
r = dump_cr(chip, CR_GPI_EN, "CR_GPI_EN");
if (r)
return r;
return dump_cr(chip, CR_INTERRUPT, "CR_INTERRUPT");
}
static void dump_fw_registers(struct zd_chip *chip)
{
const zd_addr_t addr[4] = {
fw_reg_addr(chip, FW_REG_FIRMWARE_VER),
fw_reg_addr(chip, FW_REG_USB_SPEED),
fw_reg_addr(chip, FW_REG_FIX_TX_RATE),
fw_reg_addr(chip, FW_REG_LED_LINK_STATUS),
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
};
int r;
u16 values[4];
r = zd_ioread16v_locked(chip, values, (const zd_addr_t*)addr,
ARRAY_SIZE(addr));
if (r) {
dev_dbg_f(zd_chip_dev(chip), "error %d zd_ioread16v_locked\n",
r);
return;
}
dev_dbg_f(zd_chip_dev(chip), "FW_FIRMWARE_VER %#06hx\n", values[0]);
dev_dbg_f(zd_chip_dev(chip), "FW_USB_SPEED %#06hx\n", values[1]);
dev_dbg_f(zd_chip_dev(chip), "FW_FIX_TX_RATE %#06hx\n", values[2]);
dev_dbg_f(zd_chip_dev(chip), "FW_LINK_STATUS %#06hx\n", values[3]);
}
#endif /* DEBUG */
static int print_fw_version(struct zd_chip *chip)
{
int r;
u16 version;
r = zd_ioread16_locked(chip, &version,
fw_reg_addr(chip, FW_REG_FIRMWARE_VER));
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
if (r)
return r;
dev_info(zd_chip_dev(chip),"firmware version %04hx\n", version);
return 0;
}
static int set_mandatory_rates(struct zd_chip *chip, int gmode)
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
{
u32 rates;
ZD_ASSERT(mutex_is_locked(&chip->mutex));
/* This sets the mandatory rates, which only depend from the standard
* that the device is supporting. Until further notice we should try
* to support 802.11g also for full speed USB.
*/
if (!gmode)
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
rates = CR_RATE_1M|CR_RATE_2M|CR_RATE_5_5M|CR_RATE_11M;
else
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
rates = CR_RATE_1M|CR_RATE_2M|CR_RATE_5_5M|CR_RATE_11M|
CR_RATE_6M|CR_RATE_12M|CR_RATE_24M;
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
return zd_iowrite32_locked(chip, rates, CR_MANDATORY_RATE_TBL);
}
int zd_chip_set_rts_cts_rate_locked(struct zd_chip *chip,
int preamble)
{
u32 value = 0;
dev_dbg_f(zd_chip_dev(chip), "preamble=%x\n", preamble);
value |= preamble << RTSCTS_SH_RTS_PMB_TYPE;
value |= preamble << RTSCTS_SH_CTS_PMB_TYPE;
/* We always send 11M RTS/self-CTS messages, like the vendor driver. */
value |= ZD_PURE_RATE(ZD_CCK_RATE_11M) << RTSCTS_SH_RTS_RATE;
value |= ZD_RX_CCK << RTSCTS_SH_RTS_MOD_TYPE;
value |= ZD_PURE_RATE(ZD_CCK_RATE_11M) << RTSCTS_SH_CTS_RATE;
value |= ZD_RX_CCK << RTSCTS_SH_CTS_MOD_TYPE;
return zd_iowrite32_locked(chip, value, CR_RTS_CTS_RATE);
}
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
int zd_chip_enable_hwint(struct zd_chip *chip)
{
int r;
mutex_lock(&chip->mutex);
r = zd_iowrite32_locked(chip, HWINT_ENABLED, CR_INTERRUPT);
mutex_unlock(&chip->mutex);
return r;
}
static int disable_hwint(struct zd_chip *chip)
{
return zd_iowrite32_locked(chip, HWINT_DISABLED, CR_INTERRUPT);
}
int zd_chip_disable_hwint(struct zd_chip *chip)
{
int r;
mutex_lock(&chip->mutex);
r = disable_hwint(chip);
mutex_unlock(&chip->mutex);
return r;
}
static int read_fw_regs_offset(struct zd_chip *chip)
{
int r;
ZD_ASSERT(mutex_is_locked(&chip->mutex));
r = zd_ioread16_locked(chip, (u16*)&chip->fw_regs_base,
FWRAW_REGS_ADDR);
if (r)
return r;
dev_dbg_f(zd_chip_dev(chip), "fw_regs_base: %#06hx\n",
(u16)chip->fw_regs_base);
return 0;
}
/* Read mac address using pre-firmware interface */
int zd_chip_read_mac_addr_fw(struct zd_chip *chip, u8 *addr)
{
dev_dbg_f(zd_chip_dev(chip), "\n");
return zd_usb_read_fw(&chip->usb, E2P_MAC_ADDR_P1, addr,
ETH_ALEN);
}
int zd_chip_init_hw(struct zd_chip *chip)
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
{
int r;
u8 rf_type;
dev_dbg_f(zd_chip_dev(chip), "\n");
mutex_lock(&chip->mutex);
#ifdef DEBUG
r = test_init(chip);
if (r)
goto out;
#endif
r = zd_iowrite32_locked(chip, 1, CR_AFTER_PNP);
if (r)
goto out;
r = read_fw_regs_offset(chip);
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
if (r)
goto out;
/* GPI is always disabled, also in the other driver.
*/
r = zd_iowrite32_locked(chip, 0, CR_GPI_EN);
if (r)
goto out;
r = zd_iowrite32_locked(chip, CWIN_SIZE, CR_CWMIN_CWMAX);
if (r)
goto out;
/* Currently we support IEEE 802.11g for full and high speed USB.
* It might be discussed, whether we should suppport pure b mode for
* full speed USB.
*/
r = set_mandatory_rates(chip, 1);
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
if (r)
goto out;
/* Disabling interrupts is certainly a smart thing here.
*/
r = disable_hwint(chip);
if (r)
goto out;
r = read_pod(chip, &rf_type);
if (r)
goto out;
r = hw_init(chip);
if (r)
goto out;
r = zd_rf_init_hw(&chip->rf, rf_type);
if (r)
goto out;
r = print_fw_version(chip);
if (r)
goto out;
#ifdef DEBUG
dump_fw_registers(chip);
r = test_init(chip);
if (r)
goto out;
#endif /* DEBUG */
r = read_cal_int_tables(chip);
if (r)
goto out;
print_id(chip);
out:
mutex_unlock(&chip->mutex);
return r;
}
static int update_pwr_int(struct zd_chip *chip, u8 channel)
{
u8 value = chip->pwr_int_values[channel - 1];
return zd_iowrite16_locked(chip, value, CR31);
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
}
static int update_pwr_cal(struct zd_chip *chip, u8 channel)
{
u8 value = chip->pwr_cal_values[channel-1];
return zd_iowrite16_locked(chip, value, CR68);
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
}
static int update_ofdm_cal(struct zd_chip *chip, u8 channel)
{
struct zd_ioreq16 ioreqs[3];
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
ioreqs[0].addr = CR67;
ioreqs[0].value = chip->ofdm_cal_values[OFDM_36M_INDEX][channel-1];
ioreqs[1].addr = CR66;
ioreqs[1].value = chip->ofdm_cal_values[OFDM_48M_INDEX][channel-1];
ioreqs[2].addr = CR65;
ioreqs[2].value = chip->ofdm_cal_values[OFDM_54M_INDEX][channel-1];
return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
}
static int update_channel_integration_and_calibration(struct zd_chip *chip,
u8 channel)
{
int r;
if (!zd_rf_should_update_pwr_int(&chip->rf))
return 0;
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
r = update_pwr_int(chip, channel);
if (r)
return r;
if (zd_chip_is_zd1211b(chip)) {
static const struct zd_ioreq16 ioreqs[] = {
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
{ CR69, 0x28 },
{},
{ CR69, 0x2a },
};
r = update_ofdm_cal(chip, channel);
if (r)
return r;
r = update_pwr_cal(chip, channel);
if (r)
return r;
r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
if (r)
return r;
}
return 0;
}
/* The CCK baseband gain can be optionally patched by the EEPROM */
static int patch_cck_gain(struct zd_chip *chip)
{
int r;
u32 value;
if (!chip->patch_cck_gain || !zd_rf_should_patch_cck_gain(&chip->rf))
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
return 0;
ZD_ASSERT(mutex_is_locked(&chip->mutex));
r = zd_ioread32_locked(chip, &value, E2P_PHY_REG);
if (r)
return r;
dev_dbg_f(zd_chip_dev(chip), "patching value %x\n", value & 0xff);
return zd_iowrite16_locked(chip, value & 0xff, CR47);
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
}
int zd_chip_set_channel(struct zd_chip *chip, u8 channel)
{
int r, t;
mutex_lock(&chip->mutex);
r = zd_chip_lock_phy_regs(chip);
if (r)
goto out;
r = zd_rf_set_channel(&chip->rf, channel);
if (r)
goto unlock;
r = update_channel_integration_and_calibration(chip, channel);
if (r)
goto unlock;
r = patch_cck_gain(chip);
if (r)
goto unlock;
r = patch_6m_band_edge(chip, channel);
if (r)
goto unlock;
r = zd_iowrite32_locked(chip, 0, CR_CONFIG_PHILIPS);
unlock:
t = zd_chip_unlock_phy_regs(chip);
if (t && !r)
r = t;
out:
mutex_unlock(&chip->mutex);
return r;
}
u8 zd_chip_get_channel(struct zd_chip *chip)
{
u8 channel;
mutex_lock(&chip->mutex);
channel = chip->rf.channel;
mutex_unlock(&chip->mutex);
return channel;
}
int zd_chip_control_leds(struct zd_chip *chip, enum led_status status)
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
{
const zd_addr_t a[] = {
fw_reg_addr(chip, FW_REG_LED_LINK_STATUS),
CR_LED,
};
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
int r;
u16 v[ARRAY_SIZE(a)];
struct zd_ioreq16 ioreqs[ARRAY_SIZE(a)] = {
[0] = { fw_reg_addr(chip, FW_REG_LED_LINK_STATUS) },
[1] = { CR_LED },
};
u16 other_led;
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
mutex_lock(&chip->mutex);
r = zd_ioread16v_locked(chip, v, (const zd_addr_t *)a, ARRAY_SIZE(a));
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
if (r)
goto out;
other_led = chip->link_led == LED1 ? LED2 : LED1;
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
switch (status) {
case LED_OFF:
ioreqs[0].value = FW_LINK_OFF;
ioreqs[1].value = v[1] & ~(LED1|LED2);
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
break;
case LED_SCANNING:
ioreqs[0].value = FW_LINK_OFF;
ioreqs[1].value = v[1] & ~other_led;
if (get_seconds() % 3 == 0) {
ioreqs[1].value &= ~chip->link_led;
} else {
ioreqs[1].value |= chip->link_led;
}
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
break;
case LED_ASSOCIATED:
ioreqs[0].value = FW_LINK_TX;
ioreqs[1].value = v[1] & ~other_led;
ioreqs[1].value |= chip->link_led;
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
break;
default:
r = -EINVAL;
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
goto out;
}
if (v[0] != ioreqs[0].value || v[1] != ioreqs[1].value) {
r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
if (r)
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
goto out;
}
r = 0;
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
out:
mutex_unlock(&chip->mutex);
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
return r;
}
int zd_chip_set_basic_rates(struct zd_chip *chip, u16 cr_rates)
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
{
int r;
if (cr_rates & ~(CR_RATES_80211B|CR_RATES_80211G))
return -EINVAL;
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
mutex_lock(&chip->mutex);
r = zd_iowrite32_locked(chip, cr_rates, CR_BASIC_RATE_TBL);
mutex_unlock(&chip->mutex);
return r;
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
}
static int ofdm_qual_db(u8 status_quality, u8 zd_rate, unsigned int size)
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
{
static const u16 constants[] = {
715, 655, 585, 540, 470, 410, 360, 315,
270, 235, 205, 175, 150, 125, 105, 85,
65, 50, 40, 25, 15
};
int i;
u32 x;
/* It seems that their quality parameter is somehow per signal
* and is now transferred per bit.
*/
switch (zd_rate) {
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
case ZD_OFDM_RATE_6M:
case ZD_OFDM_RATE_12M:
case ZD_OFDM_RATE_24M:
size *= 2;
break;
case ZD_OFDM_RATE_9M:
case ZD_OFDM_RATE_18M:
case ZD_OFDM_RATE_36M:
case ZD_OFDM_RATE_54M:
size *= 4;
size /= 3;
break;
case ZD_OFDM_RATE_48M:
size *= 3;
size /= 2;
break;
default:
return -EINVAL;
}
x = (10000 * status_quality)/size;
for (i = 0; i < ARRAY_SIZE(constants); i++) {
if (x > constants[i])
break;
}
switch (zd_rate) {
case ZD_OFDM_RATE_6M:
case ZD_OFDM_RATE_9M:
i += 3;
break;
case ZD_OFDM_RATE_12M:
case ZD_OFDM_RATE_18M:
i += 5;
break;
case ZD_OFDM_RATE_24M:
case ZD_OFDM_RATE_36M:
i += 9;
break;
case ZD_OFDM_RATE_48M:
case ZD_OFDM_RATE_54M:
i += 15;
break;
default:
return -EINVAL;
}
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
return i;
}
static int ofdm_qual_percent(u8 status_quality, u8 zd_rate, unsigned int size)
{
int r;
r = ofdm_qual_db(status_quality, zd_rate, size);
ZD_ASSERT(r >= 0);
if (r < 0)
r = 0;
r = (r * 100)/29;
return r <= 100 ? r : 100;
}
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
static unsigned int log10times100(unsigned int x)
{
static const u8 log10[] = {
0,
0, 30, 47, 60, 69, 77, 84, 90, 95, 100,
104, 107, 111, 114, 117, 120, 123, 125, 127, 130,
132, 134, 136, 138, 139, 141, 143, 144, 146, 147,
149, 150, 151, 153, 154, 155, 156, 157, 159, 160,
161, 162, 163, 164, 165, 166, 167, 168, 169, 169,
170, 171, 172, 173, 174, 174, 175, 176, 177, 177,
178, 179, 179, 180, 181, 181, 182, 183, 183, 184,
185, 185, 186, 186, 187, 188, 188, 189, 189, 190,
190, 191, 191, 192, 192, 193, 193, 194, 194, 195,
195, 196, 196, 197, 197, 198, 198, 199, 199, 200,
200, 200, 201, 201, 202, 202, 202, 203, 203, 204,
204, 204, 205, 205, 206, 206, 206, 207, 207, 207,
208, 208, 208, 209, 209, 210, 210, 210, 211, 211,
211, 212, 212, 212, 213, 213, 213, 213, 214, 214,
214, 215, 215, 215, 216, 216, 216, 217, 217, 217,
217, 218, 218, 218, 219, 219, 219, 219, 220, 220,
220, 220, 221, 221, 221, 222, 222, 222, 222, 223,
223, 223, 223, 224, 224, 224, 224,
};
return x < ARRAY_SIZE(log10) ? log10[x] : 225;
}
enum {
MAX_CCK_EVM_DB = 45,
};
static int cck_evm_db(u8 status_quality)
{
return (20 * log10times100(status_quality)) / 100;
}
static int cck_snr_db(u8 status_quality)
{
int r = MAX_CCK_EVM_DB - cck_evm_db(status_quality);
ZD_ASSERT(r >= 0);
return r;
}
static int cck_qual_percent(u8 status_quality)
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
{
int r;
r = cck_snr_db(status_quality);
r = (100*r)/17;
return r <= 100 ? r : 100;
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
}
static inline u8 zd_rate_from_ofdm_plcp_header(const void *rx_frame)
{
return ZD_OFDM | zd_ofdm_plcp_header_rate(rx_frame);
}
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
u8 zd_rx_qual_percent(const void *rx_frame, unsigned int size,
const struct rx_status *status)
{
return (status->frame_status&ZD_RX_OFDM) ?
ofdm_qual_percent(status->signal_quality_ofdm,
zd_rate_from_ofdm_plcp_header(rx_frame),
size) :
cck_qual_percent(status->signal_quality_cck);
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
}
/**
* zd_rx_rate - report zd-rate
* @rx_frame - received frame
* @rx_status - rx_status as given by the device
*
* This function converts the rate as encoded in the received packet to the
* zd-rate, we are using on other places in the driver.
*/
u8 zd_rx_rate(const void *rx_frame, const struct rx_status *status)
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
{
u8 zd_rate;
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
if (status->frame_status & ZD_RX_OFDM) {
zd_rate = zd_rate_from_ofdm_plcp_header(rx_frame);
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
} else {
switch (zd_cck_plcp_header_signal(rx_frame)) {
case ZD_CCK_PLCP_SIGNAL_1M:
zd_rate = ZD_CCK_RATE_1M;
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
break;
case ZD_CCK_PLCP_SIGNAL_2M:
zd_rate = ZD_CCK_RATE_2M;
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
break;
case ZD_CCK_PLCP_SIGNAL_5M5:
zd_rate = ZD_CCK_RATE_5_5M;
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
break;
case ZD_CCK_PLCP_SIGNAL_11M:
zd_rate = ZD_CCK_RATE_11M;
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
break;
default:
zd_rate = 0;
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
}
}
return zd_rate;
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
}
int zd_chip_switch_radio_on(struct zd_chip *chip)
{
int r;
mutex_lock(&chip->mutex);
r = zd_switch_radio_on(&chip->rf);
mutex_unlock(&chip->mutex);
return r;
}
int zd_chip_switch_radio_off(struct zd_chip *chip)
{
int r;
mutex_lock(&chip->mutex);
r = zd_switch_radio_off(&chip->rf);
mutex_unlock(&chip->mutex);
return r;
}
int zd_chip_enable_int(struct zd_chip *chip)
{
int r;
mutex_lock(&chip->mutex);
r = zd_usb_enable_int(&chip->usb);
mutex_unlock(&chip->mutex);
return r;
}
void zd_chip_disable_int(struct zd_chip *chip)
{
mutex_lock(&chip->mutex);
zd_usb_disable_int(&chip->usb);
mutex_unlock(&chip->mutex);
}
int zd_chip_enable_rxtx(struct zd_chip *chip)
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
{
int r;
mutex_lock(&chip->mutex);
zd_usb_enable_tx(&chip->usb);
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
r = zd_usb_enable_rx(&chip->usb);
mutex_unlock(&chip->mutex);
return r;
}
void zd_chip_disable_rxtx(struct zd_chip *chip)
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
{
mutex_lock(&chip->mutex);
zd_usb_disable_rx(&chip->usb);
zd_usb_disable_tx(&chip->usb);
[PATCH] ZyDAS ZD1211 USB-WLAN driver There are 60+ USB wifi adapters available on the market based on the ZyDAS ZD1211 chip. Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most data operations are coordinated by the device driver. The ZD1211 chip sits alongside an RF transceiver which is also controlled by the driver. Our driver currently supports 2 RF types, we know of one other available in a few marketed products which we will be supporting soon. Our driver also supports the newer revision of ZD1211, called ZD1211B. The initialization and RF operations are slightly different for the new revision, but the main difference is 802.11e support. Our driver does not support the QoS features yet, but we think we know how to use them. This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw. ZyDAS engineers have been responsive and supportive of our efforts, so thumbs up to them. Additionally, the firmware is redistributable and they have provided device specs. This driver has been written primarily by Ulrich Kunitz and myself. Graham Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The developers of ieee80211 and softmac have made our lives so much easier- thanks! We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite If there is enough time for review, we would like to aim for inclusion in 2.6.18. The driver works nicely as a STA, and can connect to both open and encrypted networks (we are using software-based encryption for now). We will work towards supporting more advanced features in the future (ad-hoc, master mode, 802.11a, ...). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-02 23:11:32 +07:00
mutex_unlock(&chip->mutex);
}
int zd_rfwritev_locked(struct zd_chip *chip,
const u32* values, unsigned int count, u8 bits)
{
int r;
unsigned int i;
for (i = 0; i < count; i++) {
r = zd_rfwrite_locked(chip, values[i], bits);
if (r)
return r;
}
return 0;
}
/*
* We can optionally program the RF directly through CR regs, if supported by
* the hardware. This is much faster than the older method.
*/
int zd_rfwrite_cr_locked(struct zd_chip *chip, u32 value)
{
struct zd_ioreq16 ioreqs[] = {
{ CR244, (value >> 16) & 0xff },
{ CR243, (value >> 8) & 0xff },
{ CR242, value & 0xff },
};
ZD_ASSERT(mutex_is_locked(&chip->mutex));
return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
}
int zd_rfwritev_cr_locked(struct zd_chip *chip,
const u32 *values, unsigned int count)
{
int r;
unsigned int i;
for (i = 0; i < count; i++) {
r = zd_rfwrite_cr_locked(chip, values[i]);
if (r)
return r;
}
return 0;
}
int zd_chip_set_multicast_hash(struct zd_chip *chip,
struct zd_mc_hash *hash)
{
struct zd_ioreq32 ioreqs[] = {
{ CR_GROUP_HASH_P1, hash->low },
{ CR_GROUP_HASH_P2, hash->high },
};
return zd_iowrite32a(chip, ioreqs, ARRAY_SIZE(ioreqs));
}