linux_dsm_epyc7002/drivers/usb/serial/usb-serial.c

1461 lines
39 KiB
C
Raw Normal View History

/*
* USB Serial Converter driver
*
* Copyright (C) 2009 - 2013 Johan Hovold (jhovold@gmail.com)
* Copyright (C) 1999 - 2012 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (C) 2000 Peter Berger (pberger@brimson.com)
* Copyright (C) 2000 Al Borchers (borchers@steinerpoint.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*
* This driver was originally based on the ACM driver by Armin Fuerst (which was
* based on a driver by Brad Keryan)
*
* See Documentation/usb/usb-serial.txt for more information on using this
* driver
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/seq_file.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
#include <linux/list.h>
#include <linux/uaccess.h>
#include <linux/serial.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include <linux/kfifo.h>
#include <linux/idr.h>
#include "pl2303.h"
#define DRIVER_AUTHOR "Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
#define DRIVER_DESC "USB Serial Driver core"
#define USB_SERIAL_TTY_MAJOR 188
#define USB_SERIAL_TTY_MINORS 512 /* should be enough for a while */
/* There is no MODULE_DEVICE_TABLE for usbserial.c. Instead
the MODULE_DEVICE_TABLE declarations in each serial driver
cause the "hotplug" program to pull in whatever module is necessary
via modprobe, and modprobe will load usbserial because the serial
drivers depend on it.
*/
static DEFINE_IDR(serial_minors);
static DEFINE_MUTEX(table_lock);
static LIST_HEAD(usb_serial_driver_list);
/*
* Look up the serial port structure. If it is found and it hasn't been
* disconnected, return with the parent usb_serial structure's disc_mutex held
* and its refcount incremented. Otherwise return NULL.
*/
struct usb_serial_port *usb_serial_port_get_by_minor(unsigned minor)
{
struct usb_serial *serial;
struct usb_serial_port *port;
mutex_lock(&table_lock);
port = idr_find(&serial_minors, minor);
if (!port)
goto exit;
serial = port->serial;
mutex_lock(&serial->disc_mutex);
if (serial->disconnected) {
mutex_unlock(&serial->disc_mutex);
port = NULL;
} else {
kref_get(&serial->kref);
}
exit:
mutex_unlock(&table_lock);
return port;
}
static int allocate_minors(struct usb_serial *serial, int num_ports)
{
struct usb_serial_port *port;
unsigned int i, j;
int minor;
dev_dbg(&serial->interface->dev, "%s %d\n", __func__, num_ports);
mutex_lock(&table_lock);
for (i = 0; i < num_ports; ++i) {
port = serial->port[i];
minor = idr_alloc(&serial_minors, port, 0, 0, GFP_KERNEL);
if (minor < 0)
goto error;
port->minor = minor;
port->port_number = i;
}
serial->minors_reserved = 1;
mutex_unlock(&table_lock);
return 0;
error:
/* unwind the already allocated minors */
for (j = 0; j < i; ++j)
idr_remove(&serial_minors, serial->port[j]->minor);
mutex_unlock(&table_lock);
return minor;
}
static void release_minors(struct usb_serial *serial)
{
int i;
mutex_lock(&table_lock);
for (i = 0; i < serial->num_ports; ++i)
idr_remove(&serial_minors, serial->port[i]->minor);
mutex_unlock(&table_lock);
serial->minors_reserved = 0;
}
static void destroy_serial(struct kref *kref)
{
struct usb_serial *serial;
struct usb_serial_port *port;
int i;
serial = to_usb_serial(kref);
/* return the minor range that this device had */
if (serial->minors_reserved)
release_minors(serial);
if (serial->attached && serial->type->release)
serial->type->release(serial);
/* Now that nothing is using the ports, they can be freed */
for (i = 0; i < serial->num_port_pointers; ++i) {
port = serial->port[i];
if (port) {
port->serial = NULL;
put_device(&port->dev);
}
}
usb_put_intf(serial->interface);
usb_put_dev(serial->dev);
kfree(serial);
}
void usb_serial_put(struct usb_serial *serial)
{
kref_put(&serial->kref, destroy_serial);
}
/*****************************************************************************
* Driver tty interface functions
*****************************************************************************/
/**
* serial_install - install tty
* @driver: the driver (USB in our case)
* @tty: the tty being created
*
* Create the termios objects for this tty. We use the default
* USB serial settings but permit them to be overridden by
* serial->type->init_termios.
*
* This is the first place a new tty gets used. Hence this is where we
* acquire references to the usb_serial structure and the driver module,
* where we store a pointer to the port, and where we do an autoresume.
tty: Fix regressions caused by commit b50989dc The following commit made console open fails while booting: commit b50989dc444599c8b21edc23536fc305f4e9b7d5 Author: Alan Cox <alan@linux.intel.com> Date: Sat Sep 19 13:13:22 2009 -0700 tty: make the kref destructor occur asynchronously Due to tty release routines run in a workqueue now, error like the following will be reported while booting: INIT open /dev/console Input/output error It also causes hibernation regression to appear as reported at http://bugzilla.kernel.org/show_bug.cgi?id=14229 The reason is that now there's latency issue with closing, but when we open a "closing not finished" tty, -EIO will be returned. Fix it as per the following Alan's suggestion: Fun but it's actually not a bug and the fix is wrong in itself as the port may be closing but not yet being destructed, in which case it seems to do the wrong thing. Opening a tty that is closing (and could be closing for long periods) is supposed to return -EIO. I suspect a better way to deal with this and keep the old console timing is to split tty->shutdown into two functions. tty->shutdown() - called synchronously just before we dump the tty onto the waitqueue for destruction tty->cleanup() - called when the destructor runs. We would then do the shutdown part which can occur in IRQ context fine, before queueing the rest of the release (from tty->magic = 0 ... the end) to occur asynchronously The USB update in -next would then need a call like if (tty->cleanup) tty->cleanup(tty); at the top of the async function and the USB shutdown to be split between shutdown and cleanup as the USB resource cleanup and final tidy cannot occur synchronously as it needs to sleep. In other words the logic becomes final kref put make object unfindable async clean it up Signed-off-by: Dave Young <hidave.darkstar@gmail.com> [ rjw: Rebased on top of 2.6.31-git, reworked the changelog. ] Signed-off-by: "Rafael J. Wysocki" <rjw@sisk.pl> [ Changed serial naming to match new rules, dropped tty_shutdown as per comments from Alan Stern - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-27 23:00:42 +07:00
* All these actions are reversed in serial_cleanup().
*/
static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
{
int idx = tty->index;
struct usb_serial *serial;
struct usb_serial_port *port;
int retval = -ENODEV;
port = usb_serial_port_get_by_minor(idx);
if (!port)
return retval;
serial = port->serial;
if (!try_module_get(serial->type->driver.owner))
goto error_module_get;
retval = usb_autopm_get_interface(serial->interface);
if (retval)
goto error_get_interface;
retval = tty_port_install(&port->port, driver, tty);
if (retval)
goto error_init_termios;
mutex_unlock(&serial->disc_mutex);
/* allow the driver to update the settings */
if (serial->type->init_termios)
serial->type->init_termios(tty);
tty->driver_data = port;
return retval;
error_init_termios:
usb_autopm_put_interface(serial->interface);
error_get_interface:
module_put(serial->type->driver.owner);
error_module_get:
usb_serial_put(serial);
mutex_unlock(&serial->disc_mutex);
return retval;
}
static int serial_port_activate(struct tty_port *tport, struct tty_struct *tty)
{
struct usb_serial_port *port =
container_of(tport, struct usb_serial_port, port);
struct usb_serial *serial = port->serial;
int retval;
USB: serial: refuse to open recently removed USB Serial devices A USB-serial converter device is plugged into a system, and a process opens it's device node. If the device is physically removed whilst the process still has its device node open, then other processes can sucessfully open the now non-existent device's node. I would expect that open() on a device that has been physically removed should return ENODEV. This is manifesting itself with getty on my system. I do the following: 1. set up inittab to spawn getty on ttyUSB0, eg: T1:23:respawn:/sbin/getty -L ttyUSB0 115200 vt100 2. Plug in USB-serial converter cable 3. Wait for a login prompt on a terminal program attached to the serial cable 4. Login 5. Pull the USB-serial converter cable from the box 6. getty doesn't realise that ttyUSB0 no longer exists as /dev/ttyUSB0 can still be opened. 7. Re-insert the USB-serial converter cable 8. You should no longer get a login prompt over the serial cable, as the the USB-serial cable now shows up as /dev/ttyUSB1, and getty is trying to talk to /dev/ttyUSB0. The attached patch will cause open("/dev/ttyUSB0", O_RDONLY) to return ENODEV after the USB-serial converter has been pulled. The patch was created against 2.6.28.1. I can supply it against something else if needs be. It is fairly simple, so should be OK. I am using a pl2303 device, although I don't think that makes any difference. From: James Woodcock <James.Woodcock@ACULAB.COM> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-11 22:06:53 +07:00
mutex_lock(&serial->disc_mutex);
if (serial->disconnected)
retval = -ENODEV;
else
retval = port->serial->type->open(tty, port);
mutex_unlock(&serial->disc_mutex);
if (retval < 0)
retval = usb_translate_errors(retval);
return retval;
}
static int serial_open(struct tty_struct *tty, struct file *filp)
{
struct usb_serial_port *port = tty->driver_data;
dev_dbg(tty->dev, "%s\n", __func__);
return tty_port_open(&port->port, tty, filp);
}
/**
* serial_port_shutdown - shut down hardware
* @tport: tty port to shut down
*
* Shut down a USB serial port. Serialized against activate by the
* tport mutex and kept to matching open/close pairs
* of calls by the ASYNCB_INITIALIZED flag.
*
* Not called if tty is console.
*/
static void serial_port_shutdown(struct tty_port *tport)
{
struct usb_serial_port *port =
container_of(tport, struct usb_serial_port, port);
struct usb_serial_driver *drv = port->serial->type;
if (drv->close)
drv->close(port);
}
static void serial_hangup(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
dev_dbg(tty->dev, "%s\n", __func__);
tty_port_hangup(&port->port);
}
static void serial_close(struct tty_struct *tty, struct file *filp)
{
struct usb_serial_port *port = tty->driver_data;
dev_dbg(tty->dev, "%s\n", __func__);
tty_port_close(&port->port, tty, filp);
}
/**
tty: Fix regressions caused by commit b50989dc The following commit made console open fails while booting: commit b50989dc444599c8b21edc23536fc305f4e9b7d5 Author: Alan Cox <alan@linux.intel.com> Date: Sat Sep 19 13:13:22 2009 -0700 tty: make the kref destructor occur asynchronously Due to tty release routines run in a workqueue now, error like the following will be reported while booting: INIT open /dev/console Input/output error It also causes hibernation regression to appear as reported at http://bugzilla.kernel.org/show_bug.cgi?id=14229 The reason is that now there's latency issue with closing, but when we open a "closing not finished" tty, -EIO will be returned. Fix it as per the following Alan's suggestion: Fun but it's actually not a bug and the fix is wrong in itself as the port may be closing but not yet being destructed, in which case it seems to do the wrong thing. Opening a tty that is closing (and could be closing for long periods) is supposed to return -EIO. I suspect a better way to deal with this and keep the old console timing is to split tty->shutdown into two functions. tty->shutdown() - called synchronously just before we dump the tty onto the waitqueue for destruction tty->cleanup() - called when the destructor runs. We would then do the shutdown part which can occur in IRQ context fine, before queueing the rest of the release (from tty->magic = 0 ... the end) to occur asynchronously The USB update in -next would then need a call like if (tty->cleanup) tty->cleanup(tty); at the top of the async function and the USB shutdown to be split between shutdown and cleanup as the USB resource cleanup and final tidy cannot occur synchronously as it needs to sleep. In other words the logic becomes final kref put make object unfindable async clean it up Signed-off-by: Dave Young <hidave.darkstar@gmail.com> [ rjw: Rebased on top of 2.6.31-git, reworked the changelog. ] Signed-off-by: "Rafael J. Wysocki" <rjw@sisk.pl> [ Changed serial naming to match new rules, dropped tty_shutdown as per comments from Alan Stern - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-27 23:00:42 +07:00
* serial_cleanup - free resources post close/hangup
* @port: port to free up
*
* Do the resource freeing and refcount dropping for the port.
* Avoid freeing the console.
*
* Called asynchronously after the last tty kref is dropped.
*/
tty: Fix regressions caused by commit b50989dc The following commit made console open fails while booting: commit b50989dc444599c8b21edc23536fc305f4e9b7d5 Author: Alan Cox <alan@linux.intel.com> Date: Sat Sep 19 13:13:22 2009 -0700 tty: make the kref destructor occur asynchronously Due to tty release routines run in a workqueue now, error like the following will be reported while booting: INIT open /dev/console Input/output error It also causes hibernation regression to appear as reported at http://bugzilla.kernel.org/show_bug.cgi?id=14229 The reason is that now there's latency issue with closing, but when we open a "closing not finished" tty, -EIO will be returned. Fix it as per the following Alan's suggestion: Fun but it's actually not a bug and the fix is wrong in itself as the port may be closing but not yet being destructed, in which case it seems to do the wrong thing. Opening a tty that is closing (and could be closing for long periods) is supposed to return -EIO. I suspect a better way to deal with this and keep the old console timing is to split tty->shutdown into two functions. tty->shutdown() - called synchronously just before we dump the tty onto the waitqueue for destruction tty->cleanup() - called when the destructor runs. We would then do the shutdown part which can occur in IRQ context fine, before queueing the rest of the release (from tty->magic = 0 ... the end) to occur asynchronously The USB update in -next would then need a call like if (tty->cleanup) tty->cleanup(tty); at the top of the async function and the USB shutdown to be split between shutdown and cleanup as the USB resource cleanup and final tidy cannot occur synchronously as it needs to sleep. In other words the logic becomes final kref put make object unfindable async clean it up Signed-off-by: Dave Young <hidave.darkstar@gmail.com> [ rjw: Rebased on top of 2.6.31-git, reworked the changelog. ] Signed-off-by: "Rafael J. Wysocki" <rjw@sisk.pl> [ Changed serial naming to match new rules, dropped tty_shutdown as per comments from Alan Stern - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-27 23:00:42 +07:00
static void serial_cleanup(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial;
struct module *owner;
dev_dbg(tty->dev, "%s\n", __func__);
/* The console is magical. Do not hang up the console hardware
* or there will be tears.
*/
if (port->port.console)
return;
tty->driver_data = NULL;
serial = port->serial;
owner = serial->type->driver.owner;
mutex_lock(&serial->disc_mutex);
if (!serial->disconnected)
usb_autopm_put_interface(serial->interface);
mutex_unlock(&serial->disc_mutex);
USB: serial: fix lifetime and locking problems This patch (as1229) fixes a few lifetime and locking problems in the usb-serial driver. The main symptom is that an invalid kevent is created when the serial device is unplugged while a connection is active. Ports should be unregistered when device is disconnected, not when the parent usb_serial structure is deallocated. Each open file should hold a reference to the corresponding port structure, and the reference should be released when the file is closed. serial->disc_mutex should be acquired in serial_open(), to resolve the classic race between open and disconnect. serial_close() doesn't need to hold both serial->disc_mutex and port->mutex at the same time. Release the subdriver's module reference only after releasing all the other references, in case one of the release routines needs to invoke some code in the subdriver module. Replace a call to flush_scheduled_work() (which is prone to deadlocks) with cancel_work_sync(). Also, add a call to cancel_work_sync() in the disconnect routine. Reduce the scope of serial->disc_mutex in serial_disconnect(). The only place it really needs to protect is where the "disconnected" flag is set. This fixes the bug reported in http://bugs.freedesktop.org/show_bug.cgi?id=20703 Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Dan Williams <dcbw@redhat.com> Tested-by: Ming Lei <tom.leiming@gmail.com> Reviewed-by: Oliver Neukum <oliver@neukum.org> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-14 22:31:02 +07:00
usb_serial_put(serial);
module_put(owner);
}
static int serial_write(struct tty_struct *tty, const unsigned char *buf,
int count)
{
struct usb_serial_port *port = tty->driver_data;
int retval = -ENODEV;
if (port->serial->dev->state == USB_STATE_NOTATTACHED)
goto exit;
dev_dbg(tty->dev, "%s - %d byte(s)\n", __func__, count);
retval = port->serial->type->write(tty, port, buf, count);
if (retval < 0)
retval = usb_translate_errors(retval);
exit:
return retval;
}
static int serial_write_room(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
dev_dbg(tty->dev, "%s\n", __func__);
return port->serial->type->write_room(tty);
}
static int serial_chars_in_buffer(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial = port->serial;
dev_dbg(tty->dev, "%s\n", __func__);
if (serial->disconnected)
return 0;
return serial->type->chars_in_buffer(tty);
}
static void serial_wait_until_sent(struct tty_struct *tty, int timeout)
{
struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial = port->serial;
dev_dbg(tty->dev, "%s\n", __func__);
if (!port->serial->type->wait_until_sent)
return;
mutex_lock(&serial->disc_mutex);
if (!serial->disconnected)
port->serial->type->wait_until_sent(tty, timeout);
mutex_unlock(&serial->disc_mutex);
}
static void serial_throttle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
dev_dbg(tty->dev, "%s\n", __func__);
if (port->serial->type->throttle)
port->serial->type->throttle(tty);
}
static void serial_unthrottle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
dev_dbg(tty->dev, "%s\n", __func__);
if (port->serial->type->unthrottle)
port->serial->type->unthrottle(tty);
}
static int serial_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
int retval = -ENOIOCTLCMD;
dev_dbg(tty->dev, "%s - cmd 0x%04x\n", __func__, cmd);
switch (cmd) {
case TIOCMIWAIT:
if (port->serial->type->tiocmiwait)
retval = port->serial->type->tiocmiwait(tty, arg);
break;
default:
if (port->serial->type->ioctl)
retval = port->serial->type->ioctl(tty, cmd, arg);
}
return retval;
}
static void serial_set_termios(struct tty_struct *tty, struct ktermios *old)
{
struct usb_serial_port *port = tty->driver_data;
dev_dbg(tty->dev, "%s\n", __func__);
if (port->serial->type->set_termios)
port->serial->type->set_termios(tty, port, old);
else
tty_termios_copy_hw(&tty->termios, old);
}
static int serial_break(struct tty_struct *tty, int break_state)
{
struct usb_serial_port *port = tty->driver_data;
dev_dbg(tty->dev, "%s\n", __func__);
if (port->serial->type->break_ctl)
port->serial->type->break_ctl(tty, break_state);
return 0;
}
static int serial_proc_show(struct seq_file *m, void *v)
{
struct usb_serial *serial;
struct usb_serial_port *port;
int i;
char tmp[40];
seq_puts(m, "usbserinfo:1.0 driver:2.0\n");
for (i = 0; i < USB_SERIAL_TTY_MINORS; ++i) {
port = usb_serial_port_get_by_minor(i);
if (port == NULL)
continue;
serial = port->serial;
seq_printf(m, "%d:", i);
if (serial->type->driver.owner)
seq_printf(m, " module:%s",
module_name(serial->type->driver.owner));
seq_printf(m, " name:\"%s\"",
serial->type->description);
seq_printf(m, " vendor:%04x product:%04x",
le16_to_cpu(serial->dev->descriptor.idVendor),
le16_to_cpu(serial->dev->descriptor.idProduct));
seq_printf(m, " num_ports:%d", serial->num_ports);
seq_printf(m, " port:%d", port->port_number);
usb_make_path(serial->dev, tmp, sizeof(tmp));
seq_printf(m, " path:%s", tmp);
seq_putc(m, '\n');
usb_serial_put(serial);
mutex_unlock(&serial->disc_mutex);
}
return 0;
}
static int serial_proc_open(struct inode *inode, struct file *file)
{
return single_open(file, serial_proc_show, NULL);
}
static const struct file_operations serial_proc_fops = {
.owner = THIS_MODULE,
.open = serial_proc_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int serial_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
dev_dbg(tty->dev, "%s\n", __func__);
if (port->serial->type->tiocmget)
return port->serial->type->tiocmget(tty);
return -EINVAL;
}
static int serial_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
dev_dbg(tty->dev, "%s\n", __func__);
if (port->serial->type->tiocmset)
return port->serial->type->tiocmset(tty, set, clear);
return -EINVAL;
}
static int serial_get_icount(struct tty_struct *tty,
struct serial_icounter_struct *icount)
{
struct usb_serial_port *port = tty->driver_data;
dev_dbg(tty->dev, "%s\n", __func__);
if (port->serial->type->get_icount)
return port->serial->type->get_icount(tty, icount);
return -EINVAL;
}
/*
* We would be calling tty_wakeup here, but unfortunately some line
* disciplines have an annoying habit of calling tty->write from
* the write wakeup callback (e.g. n_hdlc.c).
*/
void usb_serial_port_softint(struct usb_serial_port *port)
{
schedule_work(&port->work);
}
EXPORT_SYMBOL_GPL(usb_serial_port_softint);
static void usb_serial_port_work(struct work_struct *work)
{
struct usb_serial_port *port =
container_of(work, struct usb_serial_port, work);
tty_port_tty_wakeup(&port->port);
}
static void usb_serial_port_poison_urbs(struct usb_serial_port *port)
{
int i;
for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i)
usb_poison_urb(port->read_urbs[i]);
for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
usb_poison_urb(port->write_urbs[i]);
usb_poison_urb(port->interrupt_in_urb);
usb_poison_urb(port->interrupt_out_urb);
}
static void usb_serial_port_unpoison_urbs(struct usb_serial_port *port)
{
int i;
for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i)
usb_unpoison_urb(port->read_urbs[i]);
for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
usb_unpoison_urb(port->write_urbs[i]);
usb_unpoison_urb(port->interrupt_in_urb);
usb_unpoison_urb(port->interrupt_out_urb);
}
static void usb_serial_port_release(struct device *dev)
{
struct usb_serial_port *port = to_usb_serial_port(dev);
int i;
dev_dbg(dev, "%s\n", __func__);
usb_free_urb(port->interrupt_in_urb);
usb_free_urb(port->interrupt_out_urb);
for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) {
usb_free_urb(port->read_urbs[i]);
kfree(port->bulk_in_buffers[i]);
}
for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) {
usb_free_urb(port->write_urbs[i]);
kfree(port->bulk_out_buffers[i]);
}
kfifo_free(&port->write_fifo);
kfree(port->interrupt_in_buffer);
kfree(port->interrupt_out_buffer);
tty_port_destroy(&port->port);
kfree(port);
}
static struct usb_serial *create_serial(struct usb_device *dev,
struct usb_interface *interface,
struct usb_serial_driver *driver)
{
struct usb_serial *serial;
serial = kzalloc(sizeof(*serial), GFP_KERNEL);
if (!serial)
return NULL;
serial->dev = usb_get_dev(dev);
serial->type = driver;
serial->interface = usb_get_intf(interface);
kref_init(&serial->kref);
mutex_init(&serial->disc_mutex);
serial->minors_reserved = 0;
return serial;
}
static const struct usb_device_id *match_dynamic_id(struct usb_interface *intf,
struct usb_serial_driver *drv)
{
struct usb_dynid *dynid;
spin_lock(&drv->dynids.lock);
list_for_each_entry(dynid, &drv->dynids.list, node) {
if (usb_match_one_id(intf, &dynid->id)) {
spin_unlock(&drv->dynids.lock);
return &dynid->id;
}
}
spin_unlock(&drv->dynids.lock);
return NULL;
}
static const struct usb_device_id *get_iface_id(struct usb_serial_driver *drv,
struct usb_interface *intf)
{
const struct usb_device_id *id;
id = usb_match_id(intf, drv->id_table);
if (id) {
dev_dbg(&intf->dev, "static descriptor matches\n");
goto exit;
}
id = match_dynamic_id(intf, drv);
if (id)
dev_dbg(&intf->dev, "dynamic descriptor matches\n");
exit:
return id;
}
/* Caller must hold table_lock */
static struct usb_serial_driver *search_serial_device(
struct usb_interface *iface)
{
USB: serial: Enforce USB driver and USB serial driver match We need to make sure that the USB serial driver we find matches the USB driver whose probe we are currently executing. Otherwise we will end up with USB serial devices bound to the correct serial driver but wrong USB driver. An example of such cross-probing, where the usbserial_generic USB driver has found the sierra serial driver: May 29 18:26:15 nemi kernel: [ 4442.559246] usbserial_generic 4-4:1.0: Sierra USB modem converter detected May 29 18:26:20 nemi kernel: [ 4447.556747] usbserial_generic 4-4:1.2: Sierra USB modem converter detected May 29 18:26:25 nemi kernel: [ 4452.557288] usbserial_generic 4-4:1.3: Sierra USB modem converter detected sysfs view of the same problem: bjorn@nemi:~$ ls -l /sys/bus/usb/drivers/sierra/ total 0 --w------- 1 root root 4096 May 29 18:23 bind lrwxrwxrwx 1 root root 0 May 29 18:23 module -> ../../../../module/usbserial --w------- 1 root root 4096 May 29 18:23 uevent --w------- 1 root root 4096 May 29 18:23 unbind bjorn@nemi:~$ ls -l /sys/bus/usb-serial/drivers/sierra/ total 0 --w------- 1 root root 4096 May 29 18:23 bind lrwxrwxrwx 1 root root 0 May 29 18:23 module -> ../../../../module/sierra -rw-r--r-- 1 root root 4096 May 29 18:23 new_id lrwxrwxrwx 1 root root 0 May 29 18:32 ttyUSB0 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0/ttyUSB0 lrwxrwxrwx 1 root root 0 May 29 18:32 ttyUSB1 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.2/ttyUSB1 lrwxrwxrwx 1 root root 0 May 29 18:32 ttyUSB2 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.3/ttyUSB2 --w------- 1 root root 4096 May 29 18:23 uevent --w------- 1 root root 4096 May 29 18:23 unbind bjorn@nemi:~$ ls -l /sys/bus/usb/drivers/usbserial_generic/ total 0 lrwxrwxrwx 1 root root 0 May 29 18:33 4-4:1.0 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0 lrwxrwxrwx 1 root root 0 May 29 18:33 4-4:1.2 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.2 lrwxrwxrwx 1 root root 0 May 29 18:33 4-4:1.3 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.3 --w------- 1 root root 4096 May 29 18:33 bind lrwxrwxrwx 1 root root 0 May 29 18:33 module -> ../../../../module/usbserial --w------- 1 root root 4096 May 29 18:22 uevent --w------- 1 root root 4096 May 29 18:33 unbind bjorn@nemi:~$ ls -l /sys/bus/usb-serial/drivers/generic/ total 0 --w------- 1 root root 4096 May 29 18:33 bind lrwxrwxrwx 1 root root 0 May 29 18:33 module -> ../../../../module/usbserial -rw-r--r-- 1 root root 4096 May 29 18:33 new_id --w------- 1 root root 4096 May 29 18:22 uevent --w------- 1 root root 4096 May 29 18:33 unbind So we end up with a mismatch between the USB driver and the USB serial driver. The reason for the above is simple: The USB driver probe will succeed if *any* registered serial driver matches, and will use that serial driver for all serial driver functions. This makes ref counting go wrong. We count the USB driver as used, but not the USB serial driver. This may result in Oops'es as demonstrated by Johan Hovold <jhovold@gmail.com>: [11811.646396] drivers/usb/serial/usb-serial.c: get_free_serial 1 [11811.646443] drivers/usb/serial/usb-serial.c: get_free_serial - minor base = 0 [11811.646460] drivers/usb/serial/usb-serial.c: usb_serial_probe - registering ttyUSB0 [11811.646766] usb 6-1: pl2303 converter now attached to ttyUSB0 [11812.264197] USB Serial deregistering driver FTDI USB Serial Device [11812.264865] usbcore: deregistering interface driver ftdi_sio [11812.282180] USB Serial deregistering driver pl2303 [11812.283141] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 [11812.283272] usbcore: deregistering interface driver pl2303 [11812.301056] USB Serial deregistering driver generic [11812.301186] usbcore: deregistering interface driver usbserial_generic [11812.301259] drivers/usb/serial/usb-serial.c: usb_serial_disconnect [11812.301823] BUG: unable to handle kernel paging request at f8e7438c [11812.301845] IP: [<f8e38445>] usb_serial_disconnect+0xb5/0x100 [usbserial] [11812.301871] *pde = 357ef067 *pte = 00000000 [11812.301957] Oops: 0000 [#1] PREEMPT SMP [11812.301983] Modules linked in: usbserial(-) [last unloaded: pl2303] [11812.302008] [11812.302019] Pid: 1323, comm: modprobe Tainted: G W 3.4.0-rc7+ #101 Dell Inc. Vostro 1520/0T816J [11812.302115] EIP: 0060:[<f8e38445>] EFLAGS: 00010246 CPU: 1 [11812.302130] EIP is at usb_serial_disconnect+0xb5/0x100 [usbserial] [11812.302141] EAX: f508a180 EBX: f508a180 ECX: 00000000 EDX: f8e74300 [11812.302151] ESI: f5050800 EDI: 00000001 EBP: f5141e78 ESP: f5141e58 [11812.302160] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [11812.302170] CR0: 8005003b CR2: f8e7438c CR3: 34848000 CR4: 000007d0 [11812.302180] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [11812.302189] DR6: ffff0ff0 DR7: 00000400 [11812.302199] Process modprobe (pid: 1323, ti=f5140000 task=f61e2bc0 task.ti=f5140000) [11812.302209] Stack: [11812.302216] f8e3be0f f8e3b29c f8e3ae00 00000000 f513641c f5136400 f513641c f507a540 [11812.302325] f5141e98 c133d2c1 00000000 00000000 f509c400 f513641c f507a590 f5136450 [11812.302372] f5141ea8 c12f0344 f513641c f507a590 f5141ebc c12f0c67 00000000 f507a590 [11812.302419] Call Trace: [11812.302439] [<c133d2c1>] usb_unbind_interface+0x51/0x190 [11812.302456] [<c12f0344>] __device_release_driver+0x64/0xb0 [11812.302469] [<c12f0c67>] driver_detach+0x97/0xa0 [11812.302483] [<c12f001c>] bus_remove_driver+0x6c/0xe0 [11812.302500] [<c145938d>] ? __mutex_unlock_slowpath+0xcd/0x140 [11812.302514] [<c12f0ff9>] driver_unregister+0x49/0x80 [11812.302528] [<c1457df6>] ? printk+0x1d/0x1f [11812.302540] [<c133c50d>] usb_deregister+0x5d/0xb0 [11812.302557] [<f8e37c55>] ? usb_serial_deregister+0x45/0x50 [usbserial] [11812.302575] [<f8e37c8d>] usb_serial_deregister_drivers+0x2d/0x40 [usbserial] [11812.302593] [<f8e3a6e2>] usb_serial_generic_deregister+0x12/0x20 [usbserial] [11812.302611] [<f8e3acf0>] usb_serial_exit+0x8/0x32 [usbserial] [11812.302716] [<c1080b48>] sys_delete_module+0x158/0x260 [11812.302730] [<c110594e>] ? mntput+0x1e/0x30 [11812.302746] [<c145c3c3>] ? sysenter_exit+0xf/0x18 [11812.302746] [<c107777c>] ? trace_hardirqs_on_caller+0xec/0x170 [11812.302746] [<c145c390>] sysenter_do_call+0x12/0x36 [11812.302746] Code: 24 02 00 00 e8 dd f3 20 c8 f6 86 74 02 00 00 02 74 b4 8d 86 4c 02 00 00 47 e8 78 55 4b c8 0f b6 43 0e 39 f8 7f a9 8b 53 04 89 d8 <ff> 92 8c 00 00 00 89 d8 e8 0e ff ff ff 8b 45 f0 c7 44 24 04 2f [11812.302746] EIP: [<f8e38445>] usb_serial_disconnect+0xb5/0x100 [usbserial] SS:ESP 0068:f5141e58 [11812.302746] CR2: 00000000f8e7438c Fix by only evaluating serial drivers pointing back to the USB driver we are currently probing. This still allows two or more drivers to match the same device, running their serial driver probes to sort out which one to use. Cc: stable@vger.kernel.org # 3.0, 3.2, 3.3, 3.4 Signed-off-by: Bjørn Mork <bjorn@mork.no> Reviewed-by: Felipe Balbi <balbi@ti.com> Tested-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-30 15:00:14 +07:00
const struct usb_device_id *id = NULL;
struct usb_serial_driver *drv;
USB: serial: Enforce USB driver and USB serial driver match We need to make sure that the USB serial driver we find matches the USB driver whose probe we are currently executing. Otherwise we will end up with USB serial devices bound to the correct serial driver but wrong USB driver. An example of such cross-probing, where the usbserial_generic USB driver has found the sierra serial driver: May 29 18:26:15 nemi kernel: [ 4442.559246] usbserial_generic 4-4:1.0: Sierra USB modem converter detected May 29 18:26:20 nemi kernel: [ 4447.556747] usbserial_generic 4-4:1.2: Sierra USB modem converter detected May 29 18:26:25 nemi kernel: [ 4452.557288] usbserial_generic 4-4:1.3: Sierra USB modem converter detected sysfs view of the same problem: bjorn@nemi:~$ ls -l /sys/bus/usb/drivers/sierra/ total 0 --w------- 1 root root 4096 May 29 18:23 bind lrwxrwxrwx 1 root root 0 May 29 18:23 module -> ../../../../module/usbserial --w------- 1 root root 4096 May 29 18:23 uevent --w------- 1 root root 4096 May 29 18:23 unbind bjorn@nemi:~$ ls -l /sys/bus/usb-serial/drivers/sierra/ total 0 --w------- 1 root root 4096 May 29 18:23 bind lrwxrwxrwx 1 root root 0 May 29 18:23 module -> ../../../../module/sierra -rw-r--r-- 1 root root 4096 May 29 18:23 new_id lrwxrwxrwx 1 root root 0 May 29 18:32 ttyUSB0 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0/ttyUSB0 lrwxrwxrwx 1 root root 0 May 29 18:32 ttyUSB1 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.2/ttyUSB1 lrwxrwxrwx 1 root root 0 May 29 18:32 ttyUSB2 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.3/ttyUSB2 --w------- 1 root root 4096 May 29 18:23 uevent --w------- 1 root root 4096 May 29 18:23 unbind bjorn@nemi:~$ ls -l /sys/bus/usb/drivers/usbserial_generic/ total 0 lrwxrwxrwx 1 root root 0 May 29 18:33 4-4:1.0 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0 lrwxrwxrwx 1 root root 0 May 29 18:33 4-4:1.2 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.2 lrwxrwxrwx 1 root root 0 May 29 18:33 4-4:1.3 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.3 --w------- 1 root root 4096 May 29 18:33 bind lrwxrwxrwx 1 root root 0 May 29 18:33 module -> ../../../../module/usbserial --w------- 1 root root 4096 May 29 18:22 uevent --w------- 1 root root 4096 May 29 18:33 unbind bjorn@nemi:~$ ls -l /sys/bus/usb-serial/drivers/generic/ total 0 --w------- 1 root root 4096 May 29 18:33 bind lrwxrwxrwx 1 root root 0 May 29 18:33 module -> ../../../../module/usbserial -rw-r--r-- 1 root root 4096 May 29 18:33 new_id --w------- 1 root root 4096 May 29 18:22 uevent --w------- 1 root root 4096 May 29 18:33 unbind So we end up with a mismatch between the USB driver and the USB serial driver. The reason for the above is simple: The USB driver probe will succeed if *any* registered serial driver matches, and will use that serial driver for all serial driver functions. This makes ref counting go wrong. We count the USB driver as used, but not the USB serial driver. This may result in Oops'es as demonstrated by Johan Hovold <jhovold@gmail.com>: [11811.646396] drivers/usb/serial/usb-serial.c: get_free_serial 1 [11811.646443] drivers/usb/serial/usb-serial.c: get_free_serial - minor base = 0 [11811.646460] drivers/usb/serial/usb-serial.c: usb_serial_probe - registering ttyUSB0 [11811.646766] usb 6-1: pl2303 converter now attached to ttyUSB0 [11812.264197] USB Serial deregistering driver FTDI USB Serial Device [11812.264865] usbcore: deregistering interface driver ftdi_sio [11812.282180] USB Serial deregistering driver pl2303 [11812.283141] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 [11812.283272] usbcore: deregistering interface driver pl2303 [11812.301056] USB Serial deregistering driver generic [11812.301186] usbcore: deregistering interface driver usbserial_generic [11812.301259] drivers/usb/serial/usb-serial.c: usb_serial_disconnect [11812.301823] BUG: unable to handle kernel paging request at f8e7438c [11812.301845] IP: [<f8e38445>] usb_serial_disconnect+0xb5/0x100 [usbserial] [11812.301871] *pde = 357ef067 *pte = 00000000 [11812.301957] Oops: 0000 [#1] PREEMPT SMP [11812.301983] Modules linked in: usbserial(-) [last unloaded: pl2303] [11812.302008] [11812.302019] Pid: 1323, comm: modprobe Tainted: G W 3.4.0-rc7+ #101 Dell Inc. Vostro 1520/0T816J [11812.302115] EIP: 0060:[<f8e38445>] EFLAGS: 00010246 CPU: 1 [11812.302130] EIP is at usb_serial_disconnect+0xb5/0x100 [usbserial] [11812.302141] EAX: f508a180 EBX: f508a180 ECX: 00000000 EDX: f8e74300 [11812.302151] ESI: f5050800 EDI: 00000001 EBP: f5141e78 ESP: f5141e58 [11812.302160] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [11812.302170] CR0: 8005003b CR2: f8e7438c CR3: 34848000 CR4: 000007d0 [11812.302180] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [11812.302189] DR6: ffff0ff0 DR7: 00000400 [11812.302199] Process modprobe (pid: 1323, ti=f5140000 task=f61e2bc0 task.ti=f5140000) [11812.302209] Stack: [11812.302216] f8e3be0f f8e3b29c f8e3ae00 00000000 f513641c f5136400 f513641c f507a540 [11812.302325] f5141e98 c133d2c1 00000000 00000000 f509c400 f513641c f507a590 f5136450 [11812.302372] f5141ea8 c12f0344 f513641c f507a590 f5141ebc c12f0c67 00000000 f507a590 [11812.302419] Call Trace: [11812.302439] [<c133d2c1>] usb_unbind_interface+0x51/0x190 [11812.302456] [<c12f0344>] __device_release_driver+0x64/0xb0 [11812.302469] [<c12f0c67>] driver_detach+0x97/0xa0 [11812.302483] [<c12f001c>] bus_remove_driver+0x6c/0xe0 [11812.302500] [<c145938d>] ? __mutex_unlock_slowpath+0xcd/0x140 [11812.302514] [<c12f0ff9>] driver_unregister+0x49/0x80 [11812.302528] [<c1457df6>] ? printk+0x1d/0x1f [11812.302540] [<c133c50d>] usb_deregister+0x5d/0xb0 [11812.302557] [<f8e37c55>] ? usb_serial_deregister+0x45/0x50 [usbserial] [11812.302575] [<f8e37c8d>] usb_serial_deregister_drivers+0x2d/0x40 [usbserial] [11812.302593] [<f8e3a6e2>] usb_serial_generic_deregister+0x12/0x20 [usbserial] [11812.302611] [<f8e3acf0>] usb_serial_exit+0x8/0x32 [usbserial] [11812.302716] [<c1080b48>] sys_delete_module+0x158/0x260 [11812.302730] [<c110594e>] ? mntput+0x1e/0x30 [11812.302746] [<c145c3c3>] ? sysenter_exit+0xf/0x18 [11812.302746] [<c107777c>] ? trace_hardirqs_on_caller+0xec/0x170 [11812.302746] [<c145c390>] sysenter_do_call+0x12/0x36 [11812.302746] Code: 24 02 00 00 e8 dd f3 20 c8 f6 86 74 02 00 00 02 74 b4 8d 86 4c 02 00 00 47 e8 78 55 4b c8 0f b6 43 0e 39 f8 7f a9 8b 53 04 89 d8 <ff> 92 8c 00 00 00 89 d8 e8 0e ff ff ff 8b 45 f0 c7 44 24 04 2f [11812.302746] EIP: [<f8e38445>] usb_serial_disconnect+0xb5/0x100 [usbserial] SS:ESP 0068:f5141e58 [11812.302746] CR2: 00000000f8e7438c Fix by only evaluating serial drivers pointing back to the USB driver we are currently probing. This still allows two or more drivers to match the same device, running their serial driver probes to sort out which one to use. Cc: stable@vger.kernel.org # 3.0, 3.2, 3.3, 3.4 Signed-off-by: Bjørn Mork <bjorn@mork.no> Reviewed-by: Felipe Balbi <balbi@ti.com> Tested-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-30 15:00:14 +07:00
struct usb_driver *driver = to_usb_driver(iface->dev.driver);
/* Check if the usb id matches a known device */
list_for_each_entry(drv, &usb_serial_driver_list, driver_list) {
USB: serial: Enforce USB driver and USB serial driver match We need to make sure that the USB serial driver we find matches the USB driver whose probe we are currently executing. Otherwise we will end up with USB serial devices bound to the correct serial driver but wrong USB driver. An example of such cross-probing, where the usbserial_generic USB driver has found the sierra serial driver: May 29 18:26:15 nemi kernel: [ 4442.559246] usbserial_generic 4-4:1.0: Sierra USB modem converter detected May 29 18:26:20 nemi kernel: [ 4447.556747] usbserial_generic 4-4:1.2: Sierra USB modem converter detected May 29 18:26:25 nemi kernel: [ 4452.557288] usbserial_generic 4-4:1.3: Sierra USB modem converter detected sysfs view of the same problem: bjorn@nemi:~$ ls -l /sys/bus/usb/drivers/sierra/ total 0 --w------- 1 root root 4096 May 29 18:23 bind lrwxrwxrwx 1 root root 0 May 29 18:23 module -> ../../../../module/usbserial --w------- 1 root root 4096 May 29 18:23 uevent --w------- 1 root root 4096 May 29 18:23 unbind bjorn@nemi:~$ ls -l /sys/bus/usb-serial/drivers/sierra/ total 0 --w------- 1 root root 4096 May 29 18:23 bind lrwxrwxrwx 1 root root 0 May 29 18:23 module -> ../../../../module/sierra -rw-r--r-- 1 root root 4096 May 29 18:23 new_id lrwxrwxrwx 1 root root 0 May 29 18:32 ttyUSB0 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0/ttyUSB0 lrwxrwxrwx 1 root root 0 May 29 18:32 ttyUSB1 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.2/ttyUSB1 lrwxrwxrwx 1 root root 0 May 29 18:32 ttyUSB2 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.3/ttyUSB2 --w------- 1 root root 4096 May 29 18:23 uevent --w------- 1 root root 4096 May 29 18:23 unbind bjorn@nemi:~$ ls -l /sys/bus/usb/drivers/usbserial_generic/ total 0 lrwxrwxrwx 1 root root 0 May 29 18:33 4-4:1.0 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0 lrwxrwxrwx 1 root root 0 May 29 18:33 4-4:1.2 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.2 lrwxrwxrwx 1 root root 0 May 29 18:33 4-4:1.3 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.3 --w------- 1 root root 4096 May 29 18:33 bind lrwxrwxrwx 1 root root 0 May 29 18:33 module -> ../../../../module/usbserial --w------- 1 root root 4096 May 29 18:22 uevent --w------- 1 root root 4096 May 29 18:33 unbind bjorn@nemi:~$ ls -l /sys/bus/usb-serial/drivers/generic/ total 0 --w------- 1 root root 4096 May 29 18:33 bind lrwxrwxrwx 1 root root 0 May 29 18:33 module -> ../../../../module/usbserial -rw-r--r-- 1 root root 4096 May 29 18:33 new_id --w------- 1 root root 4096 May 29 18:22 uevent --w------- 1 root root 4096 May 29 18:33 unbind So we end up with a mismatch between the USB driver and the USB serial driver. The reason for the above is simple: The USB driver probe will succeed if *any* registered serial driver matches, and will use that serial driver for all serial driver functions. This makes ref counting go wrong. We count the USB driver as used, but not the USB serial driver. This may result in Oops'es as demonstrated by Johan Hovold <jhovold@gmail.com>: [11811.646396] drivers/usb/serial/usb-serial.c: get_free_serial 1 [11811.646443] drivers/usb/serial/usb-serial.c: get_free_serial - minor base = 0 [11811.646460] drivers/usb/serial/usb-serial.c: usb_serial_probe - registering ttyUSB0 [11811.646766] usb 6-1: pl2303 converter now attached to ttyUSB0 [11812.264197] USB Serial deregistering driver FTDI USB Serial Device [11812.264865] usbcore: deregistering interface driver ftdi_sio [11812.282180] USB Serial deregistering driver pl2303 [11812.283141] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 [11812.283272] usbcore: deregistering interface driver pl2303 [11812.301056] USB Serial deregistering driver generic [11812.301186] usbcore: deregistering interface driver usbserial_generic [11812.301259] drivers/usb/serial/usb-serial.c: usb_serial_disconnect [11812.301823] BUG: unable to handle kernel paging request at f8e7438c [11812.301845] IP: [<f8e38445>] usb_serial_disconnect+0xb5/0x100 [usbserial] [11812.301871] *pde = 357ef067 *pte = 00000000 [11812.301957] Oops: 0000 [#1] PREEMPT SMP [11812.301983] Modules linked in: usbserial(-) [last unloaded: pl2303] [11812.302008] [11812.302019] Pid: 1323, comm: modprobe Tainted: G W 3.4.0-rc7+ #101 Dell Inc. Vostro 1520/0T816J [11812.302115] EIP: 0060:[<f8e38445>] EFLAGS: 00010246 CPU: 1 [11812.302130] EIP is at usb_serial_disconnect+0xb5/0x100 [usbserial] [11812.302141] EAX: f508a180 EBX: f508a180 ECX: 00000000 EDX: f8e74300 [11812.302151] ESI: f5050800 EDI: 00000001 EBP: f5141e78 ESP: f5141e58 [11812.302160] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [11812.302170] CR0: 8005003b CR2: f8e7438c CR3: 34848000 CR4: 000007d0 [11812.302180] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [11812.302189] DR6: ffff0ff0 DR7: 00000400 [11812.302199] Process modprobe (pid: 1323, ti=f5140000 task=f61e2bc0 task.ti=f5140000) [11812.302209] Stack: [11812.302216] f8e3be0f f8e3b29c f8e3ae00 00000000 f513641c f5136400 f513641c f507a540 [11812.302325] f5141e98 c133d2c1 00000000 00000000 f509c400 f513641c f507a590 f5136450 [11812.302372] f5141ea8 c12f0344 f513641c f507a590 f5141ebc c12f0c67 00000000 f507a590 [11812.302419] Call Trace: [11812.302439] [<c133d2c1>] usb_unbind_interface+0x51/0x190 [11812.302456] [<c12f0344>] __device_release_driver+0x64/0xb0 [11812.302469] [<c12f0c67>] driver_detach+0x97/0xa0 [11812.302483] [<c12f001c>] bus_remove_driver+0x6c/0xe0 [11812.302500] [<c145938d>] ? __mutex_unlock_slowpath+0xcd/0x140 [11812.302514] [<c12f0ff9>] driver_unregister+0x49/0x80 [11812.302528] [<c1457df6>] ? printk+0x1d/0x1f [11812.302540] [<c133c50d>] usb_deregister+0x5d/0xb0 [11812.302557] [<f8e37c55>] ? usb_serial_deregister+0x45/0x50 [usbserial] [11812.302575] [<f8e37c8d>] usb_serial_deregister_drivers+0x2d/0x40 [usbserial] [11812.302593] [<f8e3a6e2>] usb_serial_generic_deregister+0x12/0x20 [usbserial] [11812.302611] [<f8e3acf0>] usb_serial_exit+0x8/0x32 [usbserial] [11812.302716] [<c1080b48>] sys_delete_module+0x158/0x260 [11812.302730] [<c110594e>] ? mntput+0x1e/0x30 [11812.302746] [<c145c3c3>] ? sysenter_exit+0xf/0x18 [11812.302746] [<c107777c>] ? trace_hardirqs_on_caller+0xec/0x170 [11812.302746] [<c145c390>] sysenter_do_call+0x12/0x36 [11812.302746] Code: 24 02 00 00 e8 dd f3 20 c8 f6 86 74 02 00 00 02 74 b4 8d 86 4c 02 00 00 47 e8 78 55 4b c8 0f b6 43 0e 39 f8 7f a9 8b 53 04 89 d8 <ff> 92 8c 00 00 00 89 d8 e8 0e ff ff ff 8b 45 f0 c7 44 24 04 2f [11812.302746] EIP: [<f8e38445>] usb_serial_disconnect+0xb5/0x100 [usbserial] SS:ESP 0068:f5141e58 [11812.302746] CR2: 00000000f8e7438c Fix by only evaluating serial drivers pointing back to the USB driver we are currently probing. This still allows two or more drivers to match the same device, running their serial driver probes to sort out which one to use. Cc: stable@vger.kernel.org # 3.0, 3.2, 3.3, 3.4 Signed-off-by: Bjørn Mork <bjorn@mork.no> Reviewed-by: Felipe Balbi <balbi@ti.com> Tested-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-30 15:00:14 +07:00
if (drv->usb_driver == driver)
id = get_iface_id(drv, iface);
if (id)
return drv;
}
return NULL;
}
static int serial_port_carrier_raised(struct tty_port *port)
{
struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
struct usb_serial_driver *drv = p->serial->type;
if (drv->carrier_raised)
return drv->carrier_raised(p);
/* No carrier control - don't block */
return 1;
}
static void serial_port_dtr_rts(struct tty_port *port, int on)
{
struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
struct usb_serial_driver *drv = p->serial->type;
if (drv->dtr_rts)
drv->dtr_rts(p, on);
}
static const struct tty_port_operations serial_port_ops = {
.carrier_raised = serial_port_carrier_raised,
.dtr_rts = serial_port_dtr_rts,
.activate = serial_port_activate,
.shutdown = serial_port_shutdown,
};
static int usb_serial_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
struct device *ddev = &interface->dev;
struct usb_device *dev = interface_to_usbdev(interface);
struct usb_serial *serial = NULL;
struct usb_serial_port *port;
struct usb_host_interface *iface_desc;
struct usb_endpoint_descriptor *endpoint;
struct usb_endpoint_descriptor *interrupt_in_endpoint[MAX_NUM_PORTS];
struct usb_endpoint_descriptor *interrupt_out_endpoint[MAX_NUM_PORTS];
struct usb_endpoint_descriptor *bulk_in_endpoint[MAX_NUM_PORTS];
struct usb_endpoint_descriptor *bulk_out_endpoint[MAX_NUM_PORTS];
struct usb_serial_driver *type = NULL;
int retval;
int buffer_size;
int i;
int j;
int num_interrupt_in = 0;
int num_interrupt_out = 0;
int num_bulk_in = 0;
int num_bulk_out = 0;
int num_ports = 0;
int max_endpoints;
mutex_lock(&table_lock);
type = search_serial_device(interface);
if (!type) {
mutex_unlock(&table_lock);
dev_dbg(ddev, "none matched\n");
return -ENODEV;
}
if (!try_module_get(type->driver.owner)) {
mutex_unlock(&table_lock);
dev_err(ddev, "module get failed, exiting\n");
return -EIO;
}
mutex_unlock(&table_lock);
serial = create_serial(dev, interface, type);
if (!serial) {
module_put(type->driver.owner);
return -ENOMEM;
}
/* if this device type has a probe function, call it */
if (type->probe) {
const struct usb_device_id *id;
id = get_iface_id(type, interface);
retval = type->probe(serial, id);
if (retval) {
dev_dbg(ddev, "sub driver rejected device\n");
usb_serial_put(serial);
module_put(type->driver.owner);
return retval;
}
}
/* descriptor matches, let's find the endpoints needed */
/* check out the endpoints */
iface_desc = interface->cur_altsetting;
for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
endpoint = &iface_desc->endpoint[i].desc;
if (usb_endpoint_is_bulk_in(endpoint)) {
/* we found a bulk in endpoint */
dev_dbg(ddev, "found bulk in on endpoint %d\n", i);
if (num_bulk_in < MAX_NUM_PORTS) {
bulk_in_endpoint[num_bulk_in] = endpoint;
++num_bulk_in;
}
}
if (usb_endpoint_is_bulk_out(endpoint)) {
/* we found a bulk out endpoint */
dev_dbg(ddev, "found bulk out on endpoint %d\n", i);
if (num_bulk_out < MAX_NUM_PORTS) {
bulk_out_endpoint[num_bulk_out] = endpoint;
++num_bulk_out;
}
}
if (usb_endpoint_is_int_in(endpoint)) {
/* we found a interrupt in endpoint */
dev_dbg(ddev, "found interrupt in on endpoint %d\n", i);
if (num_interrupt_in < MAX_NUM_PORTS) {
interrupt_in_endpoint[num_interrupt_in] =
endpoint;
++num_interrupt_in;
}
}
if (usb_endpoint_is_int_out(endpoint)) {
/* we found an interrupt out endpoint */
dev_dbg(ddev, "found interrupt out on endpoint %d\n", i);
if (num_interrupt_out < MAX_NUM_PORTS) {
interrupt_out_endpoint[num_interrupt_out] =
endpoint;
++num_interrupt_out;
}
}
}
#if defined(CONFIG_USB_SERIAL_PL2303) || defined(CONFIG_USB_SERIAL_PL2303_MODULE)
/* BEGIN HORRIBLE HACK FOR PL2303 */
/* this is needed due to the looney way its endpoints are set up */
if (((le16_to_cpu(dev->descriptor.idVendor) == PL2303_VENDOR_ID) &&
(le16_to_cpu(dev->descriptor.idProduct) == PL2303_PRODUCT_ID)) ||
((le16_to_cpu(dev->descriptor.idVendor) == ATEN_VENDOR_ID) &&
(le16_to_cpu(dev->descriptor.idProduct) == ATEN_PRODUCT_ID)) ||
((le16_to_cpu(dev->descriptor.idVendor) == ALCOR_VENDOR_ID) &&
(le16_to_cpu(dev->descriptor.idProduct) == ALCOR_PRODUCT_ID)) ||
((le16_to_cpu(dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) &&
(le16_to_cpu(dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_EF81))) {
if (interface != dev->actconfig->interface[0]) {
/* check out the endpoints of the other interface*/
iface_desc = dev->actconfig->interface[0]->cur_altsetting;
for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
endpoint = &iface_desc->endpoint[i].desc;
if (usb_endpoint_is_int_in(endpoint)) {
/* we found a interrupt in endpoint */
dev_dbg(ddev, "found interrupt in for Prolific device on separate interface\n");
if (num_interrupt_in < MAX_NUM_PORTS) {
interrupt_in_endpoint[num_interrupt_in] = endpoint;
++num_interrupt_in;
}
}
}
}
/* Now make sure the PL-2303 is configured correctly.
* If not, give up now and hope this hack will work
* properly during a later invocation of usb_serial_probe
*/
if (num_bulk_in == 0 || num_bulk_out == 0) {
dev_info(ddev, "PL-2303 hack: descriptors matched but endpoints did not\n");
usb_serial_put(serial);
module_put(type->driver.owner);
return -ENODEV;
}
}
/* END HORRIBLE HACK FOR PL2303 */
#endif
#ifdef CONFIG_USB_SERIAL_GENERIC
if (type == &usb_serial_generic_device) {
num_ports = num_bulk_out;
if (num_ports == 0) {
dev_err(ddev, "Generic device with no bulk out, not allowed.\n");
usb_serial_put(serial);
module_put(type->driver.owner);
return -EIO;
}
dev_info(ddev, "The \"generic\" usb-serial driver is only for testing and one-off prototypes.\n");
dev_info(ddev, "Tell linux-usb@vger.kernel.org to add your device to a proper driver.\n");
}
#endif
if (!num_ports) {
/* if this device type has a calc_num_ports function, call it */
if (type->calc_num_ports)
num_ports = type->calc_num_ports(serial);
if (!num_ports)
num_ports = type->num_ports;
}
if (num_ports > MAX_NUM_PORTS) {
dev_warn(ddev, "too many ports requested: %d\n", num_ports);
num_ports = MAX_NUM_PORTS;
}
serial->num_ports = num_ports;
serial->num_bulk_in = num_bulk_in;
serial->num_bulk_out = num_bulk_out;
serial->num_interrupt_in = num_interrupt_in;
serial->num_interrupt_out = num_interrupt_out;
/* found all that we need */
dev_info(ddev, "%s converter detected\n", type->description);
/* create our ports, we need as many as the max endpoints */
/* we don't use num_ports here because some devices have more
endpoint pairs than ports */
max_endpoints = max(num_bulk_in, num_bulk_out);
max_endpoints = max(max_endpoints, num_interrupt_in);
max_endpoints = max(max_endpoints, num_interrupt_out);
max_endpoints = max(max_endpoints, (int)serial->num_ports);
serial->num_port_pointers = max_endpoints;
dev_dbg(ddev, "setting up %d port structure(s)\n", max_endpoints);
for (i = 0; i < max_endpoints; ++i) {
port = kzalloc(sizeof(struct usb_serial_port), GFP_KERNEL);
if (!port)
goto probe_error;
tty_port_init(&port->port);
port->port.ops = &serial_port_ops;
port->serial = serial;
spin_lock_init(&port->lock);
/* Keep this for private driver use for the moment but
should probably go away */
INIT_WORK(&port->work, usb_serial_port_work);
serial->port[i] = port;
port->dev.parent = &interface->dev;
port->dev.driver = NULL;
port->dev.bus = &usb_serial_bus_type;
port->dev.release = &usb_serial_port_release;
device_initialize(&port->dev);
}
/* set up the endpoint information */
for (i = 0; i < num_bulk_in; ++i) {
endpoint = bulk_in_endpoint[i];
port = serial->port[i];
buffer_size = max_t(int, serial->type->bulk_in_size,
USB: use usb_endpoint_maxp() instead of le16_to_cpu() Now ${LINUX}/drivers/usb/* can use usb_endpoint_maxp(desc) to get maximum packet size instead of le16_to_cpu(desc->wMaxPacketSize). This patch fix it up Cc: Armin Fuerst <fuerst@in.tum.de> Cc: Pavel Machek <pavel@ucw.cz> Cc: Johannes Erdfelt <johannes@erdfelt.com> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Oliver Neukum <oliver@neukum.name> Cc: David Kubicek <dave@awk.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Brad Hards <bhards@bigpond.net.au> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Dahlmann <dahlmann.thomas@arcor.de> Cc: David Brownell <david-b@pacbell.net> Cc: David Lopo <dlopo@chipidea.mips.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Xie Xiaobo <X.Xie@freescale.com> Cc: Li Yang <leoli@freescale.com> Cc: Jiang Bo <tanya.jiang@freescale.com> Cc: Yuan-hsin Chen <yhchen@faraday-tech.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: OKI SEMICONDUCTOR, <toshiharu-linux@dsn.okisemi.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Ben Dooks <ben@simtec.co.uk> Cc: Thomas Abraham <thomas.ab@samsung.com> Cc: Herbert Pötzl <herbert@13thfloor.at> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Roman Weissgaerber <weissg@vienna.at> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Tony Olech <tony.olech@elandigitalsystems.com> Cc: Florian Floe Echtler <echtler@fs.tum.de> Cc: Christian Lucht <lucht@codemercs.com> Cc: Juergen Stuber <starblue@sourceforge.net> Cc: Georges Toth <g.toth@e-biz.lu> Cc: Bill Ryder <bryder@sgi.com> Cc: Kuba Ober <kuba@mareimbrium.org> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23 17:12:03 +07:00
usb_endpoint_maxp(endpoint));
port->bulk_in_size = buffer_size;
port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
for (j = 0; j < ARRAY_SIZE(port->read_urbs); ++j) {
set_bit(j, &port->read_urbs_free);
port->read_urbs[j] = usb_alloc_urb(0, GFP_KERNEL);
if (!port->read_urbs[j])
goto probe_error;
port->bulk_in_buffers[j] = kmalloc(buffer_size,
GFP_KERNEL);
if (!port->bulk_in_buffers[j])
goto probe_error;
usb_fill_bulk_urb(port->read_urbs[j], dev,
usb_rcvbulkpipe(dev,
endpoint->bEndpointAddress),
port->bulk_in_buffers[j], buffer_size,
serial->type->read_bulk_callback,
port);
}
port->read_urb = port->read_urbs[0];
port->bulk_in_buffer = port->bulk_in_buffers[0];
}
for (i = 0; i < num_bulk_out; ++i) {
endpoint = bulk_out_endpoint[i];
port = serial->port[i];
if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL))
goto probe_error;
buffer_size = max_t(int, serial->type->bulk_out_size,
usb_endpoint_maxp(endpoint));
port->bulk_out_size = buffer_size;
port->bulk_out_endpointAddress = endpoint->bEndpointAddress;
for (j = 0; j < ARRAY_SIZE(port->write_urbs); ++j) {
set_bit(j, &port->write_urbs_free);
port->write_urbs[j] = usb_alloc_urb(0, GFP_KERNEL);
if (!port->write_urbs[j])
goto probe_error;
port->bulk_out_buffers[j] = kmalloc(buffer_size,
GFP_KERNEL);
if (!port->bulk_out_buffers[j])
goto probe_error;
usb_fill_bulk_urb(port->write_urbs[j], dev,
usb_sndbulkpipe(dev,
endpoint->bEndpointAddress),
port->bulk_out_buffers[j], buffer_size,
serial->type->write_bulk_callback,
port);
}
port->write_urb = port->write_urbs[0];
port->bulk_out_buffer = port->bulk_out_buffers[0];
}
if (serial->type->read_int_callback) {
for (i = 0; i < num_interrupt_in; ++i) {
endpoint = interrupt_in_endpoint[i];
port = serial->port[i];
port->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!port->interrupt_in_urb)
goto probe_error;
USB: use usb_endpoint_maxp() instead of le16_to_cpu() Now ${LINUX}/drivers/usb/* can use usb_endpoint_maxp(desc) to get maximum packet size instead of le16_to_cpu(desc->wMaxPacketSize). This patch fix it up Cc: Armin Fuerst <fuerst@in.tum.de> Cc: Pavel Machek <pavel@ucw.cz> Cc: Johannes Erdfelt <johannes@erdfelt.com> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Oliver Neukum <oliver@neukum.name> Cc: David Kubicek <dave@awk.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Brad Hards <bhards@bigpond.net.au> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Dahlmann <dahlmann.thomas@arcor.de> Cc: David Brownell <david-b@pacbell.net> Cc: David Lopo <dlopo@chipidea.mips.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Xie Xiaobo <X.Xie@freescale.com> Cc: Li Yang <leoli@freescale.com> Cc: Jiang Bo <tanya.jiang@freescale.com> Cc: Yuan-hsin Chen <yhchen@faraday-tech.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: OKI SEMICONDUCTOR, <toshiharu-linux@dsn.okisemi.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Ben Dooks <ben@simtec.co.uk> Cc: Thomas Abraham <thomas.ab@samsung.com> Cc: Herbert Pötzl <herbert@13thfloor.at> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Roman Weissgaerber <weissg@vienna.at> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Tony Olech <tony.olech@elandigitalsystems.com> Cc: Florian Floe Echtler <echtler@fs.tum.de> Cc: Christian Lucht <lucht@codemercs.com> Cc: Juergen Stuber <starblue@sourceforge.net> Cc: Georges Toth <g.toth@e-biz.lu> Cc: Bill Ryder <bryder@sgi.com> Cc: Kuba Ober <kuba@mareimbrium.org> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23 17:12:03 +07:00
buffer_size = usb_endpoint_maxp(endpoint);
port->interrupt_in_endpointAddress =
endpoint->bEndpointAddress;
port->interrupt_in_buffer = kmalloc(buffer_size,
GFP_KERNEL);
if (!port->interrupt_in_buffer)
goto probe_error;
usb_fill_int_urb(port->interrupt_in_urb, dev,
usb_rcvintpipe(dev,
endpoint->bEndpointAddress),
port->interrupt_in_buffer, buffer_size,
serial->type->read_int_callback, port,
endpoint->bInterval);
}
} else if (num_interrupt_in) {
dev_dbg(ddev, "The device claims to support interrupt in transfers, but read_int_callback is not defined\n");
}
if (serial->type->write_int_callback) {
for (i = 0; i < num_interrupt_out; ++i) {
endpoint = interrupt_out_endpoint[i];
port = serial->port[i];
port->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!port->interrupt_out_urb)
goto probe_error;
USB: use usb_endpoint_maxp() instead of le16_to_cpu() Now ${LINUX}/drivers/usb/* can use usb_endpoint_maxp(desc) to get maximum packet size instead of le16_to_cpu(desc->wMaxPacketSize). This patch fix it up Cc: Armin Fuerst <fuerst@in.tum.de> Cc: Pavel Machek <pavel@ucw.cz> Cc: Johannes Erdfelt <johannes@erdfelt.com> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Oliver Neukum <oliver@neukum.name> Cc: David Kubicek <dave@awk.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Brad Hards <bhards@bigpond.net.au> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Dahlmann <dahlmann.thomas@arcor.de> Cc: David Brownell <david-b@pacbell.net> Cc: David Lopo <dlopo@chipidea.mips.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Xie Xiaobo <X.Xie@freescale.com> Cc: Li Yang <leoli@freescale.com> Cc: Jiang Bo <tanya.jiang@freescale.com> Cc: Yuan-hsin Chen <yhchen@faraday-tech.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: OKI SEMICONDUCTOR, <toshiharu-linux@dsn.okisemi.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Ben Dooks <ben@simtec.co.uk> Cc: Thomas Abraham <thomas.ab@samsung.com> Cc: Herbert Pötzl <herbert@13thfloor.at> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Roman Weissgaerber <weissg@vienna.at> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Tony Olech <tony.olech@elandigitalsystems.com> Cc: Florian Floe Echtler <echtler@fs.tum.de> Cc: Christian Lucht <lucht@codemercs.com> Cc: Juergen Stuber <starblue@sourceforge.net> Cc: Georges Toth <g.toth@e-biz.lu> Cc: Bill Ryder <bryder@sgi.com> Cc: Kuba Ober <kuba@mareimbrium.org> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23 17:12:03 +07:00
buffer_size = usb_endpoint_maxp(endpoint);
port->interrupt_out_size = buffer_size;
port->interrupt_out_endpointAddress =
endpoint->bEndpointAddress;
port->interrupt_out_buffer = kmalloc(buffer_size,
GFP_KERNEL);
if (!port->interrupt_out_buffer)
goto probe_error;
usb_fill_int_urb(port->interrupt_out_urb, dev,
usb_sndintpipe(dev,
endpoint->bEndpointAddress),
port->interrupt_out_buffer, buffer_size,
serial->type->write_int_callback, port,
endpoint->bInterval);
}
} else if (num_interrupt_out) {
dev_dbg(ddev, "The device claims to support interrupt out transfers, but write_int_callback is not defined\n");
}
usb_set_intfdata(interface, serial);
/* if this device type has an attach function, call it */
if (type->attach) {
retval = type->attach(serial);
if (retval < 0)
goto probe_error;
serial->attached = 1;
if (retval > 0) {
/* quietly accept this device, but don't bind to a
serial port as it's about to disappear */
serial->num_ports = 0;
goto exit;
}
} else {
serial->attached = 1;
}
USB: serial: fix race between probe and open Fix race between probe and open by making sure that the disconnected flag is not cleared until all ports have been registered. A call to tty_open while probe is running may get a reference to the serial structure in serial_install before its ports have been registered. This may lead to usb_serial_core calling driver open before port is fully initialised. With ftdi_sio this result in the following NULL-pointer dereference as the private data has not been initialised at open: [ 199.698286] IP: [<f811a089>] ftdi_open+0x59/0xe0 [ftdi_sio] [ 199.698297] *pde = 00000000 [ 199.698303] Oops: 0000 [#1] PREEMPT SMP [ 199.698313] Modules linked in: ftdi_sio usbserial [ 199.698323] [ 199.698327] Pid: 1146, comm: ftdi_open Not tainted 3.2.11 #70 Dell Inc. Vostro 1520/0T816J [ 199.698339] EIP: 0060:[<f811a089>] EFLAGS: 00010286 CPU: 0 [ 199.698344] EIP is at ftdi_open+0x59/0xe0 [ftdi_sio] [ 199.698348] EAX: 0000003e EBX: f5067000 ECX: 00000000 EDX: 80000600 [ 199.698352] ESI: f48d8800 EDI: 00000001 EBP: f515dd54 ESP: f515dcfc [ 199.698356] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 199.698361] Process ftdi_open (pid: 1146, ti=f515c000 task=f481e040 task.ti=f515c000) [ 199.698364] Stack: [ 199.698368] f811a9fe f811a9e0 f811b3ef 00000000 00000000 00001388 00000000 f4a86800 [ 199.698387] 00000002 00000000 f806e68e 00000000 f532765c f481e040 00000246 22222222 [ 199.698479] 22222222 22222222 22222222 f5067004 f5327600 f5327638 f515dd74 f806e6ab [ 199.698496] Call Trace: [ 199.698504] [<f806e68e>] ? serial_activate+0x2e/0x70 [usbserial] [ 199.698511] [<f806e6ab>] serial_activate+0x4b/0x70 [usbserial] [ 199.698521] [<c126380c>] tty_port_open+0x7c/0xd0 [ 199.698527] [<f806e660>] ? serial_set_termios+0xa0/0xa0 [usbserial] [ 199.698534] [<f806e76f>] serial_open+0x2f/0x70 [usbserial] [ 199.698540] [<c125d07c>] tty_open+0x20c/0x510 [ 199.698546] [<c10e9eb7>] chrdev_open+0xe7/0x230 [ 199.698553] [<c10e48f2>] __dentry_open+0x1f2/0x390 [ 199.698559] [<c144bfec>] ? _raw_spin_unlock+0x2c/0x50 [ 199.698565] [<c10e4b76>] nameidata_to_filp+0x66/0x80 [ 199.698570] [<c10e9dd0>] ? cdev_put+0x20/0x20 [ 199.698576] [<c10f3e08>] do_last+0x198/0x730 [ 199.698581] [<c10f4440>] path_openat+0xa0/0x350 [ 199.698587] [<c10f47d5>] do_filp_open+0x35/0x80 [ 199.698593] [<c144bfec>] ? _raw_spin_unlock+0x2c/0x50 [ 199.698599] [<c10ff110>] ? alloc_fd+0xc0/0x100 [ 199.698605] [<c10f0b72>] ? getname_flags+0x72/0x120 [ 199.698611] [<c10e4450>] do_sys_open+0xf0/0x1c0 [ 199.698617] [<c11fcc08>] ? trace_hardirqs_on_thunk+0xc/0x10 [ 199.698623] [<c10e458e>] sys_open+0x2e/0x40 [ 199.698628] [<c144c990>] sysenter_do_call+0x12/0x36 [ 199.698632] Code: 85 89 00 00 00 8b 16 8b 4d c0 c1 e2 08 c7 44 24 14 88 13 00 00 81 ca 00 00 00 80 c7 44 24 10 00 00 00 00 c7 44 24 0c 00 00 00 00 <0f> b7 41 78 31 c9 89 44 24 08 c7 44 24 04 00 00 00 00 c7 04 24 [ 199.698884] EIP: [<f811a089>] ftdi_open+0x59/0xe0 [ftdi_sio] SS:ESP 0068:f515dcfc [ 199.698893] CR2: 0000000000000078 [ 199.698925] ---[ end trace 77c43ec023940cff ]--- Reported-and-tested-by: Ken Huang <csuhgw@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-20 22:59:33 +07:00
/* Avoid race with tty_open and serial_install by setting the
* disconnected flag and not clearing it until all ports have been
* registered.
*/
serial->disconnected = 1;
if (allocate_minors(serial, num_ports)) {
dev_err(ddev, "No more free serial minor numbers\n");
goto probe_error;
}
/* register all of the individual ports with the driver core */
for (i = 0; i < num_ports; ++i) {
port = serial->port[i];
USB: serial: ports: add minor and port number The usb_serial_port structure had the number field, which was the minor number for the port, which almost no one really cared about. They really wanted the number of the port within the device, which you had to subtract from the minor of the parent usb_serial_device structure. To clean this up, provide the real minor number of the port, and the number of the port within the serial device separately, as these numbers might not be related in the future. Bonus is that this cleans up a lot of logic in the drivers, and saves lines overall. Tested-by: Tobias Winter <tobias@linuxdingsda.de> Reviewed-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -- drivers/staging/serqt_usb2/serqt_usb2.c | 21 +++-------- drivers/usb/serial/ark3116.c | 2 - drivers/usb/serial/bus.c | 6 +-- drivers/usb/serial/console.c | 2 - drivers/usb/serial/cp210x.c | 2 - drivers/usb/serial/cypress_m8.c | 4 +- drivers/usb/serial/digi_acceleport.c | 6 --- drivers/usb/serial/f81232.c | 5 +- drivers/usb/serial/garmin_gps.c | 6 +-- drivers/usb/serial/io_edgeport.c | 58 ++++++++++++-------------------- drivers/usb/serial/io_ti.c | 21 ++++------- drivers/usb/serial/keyspan.c | 29 +++++++--------- drivers/usb/serial/metro-usb.c | 4 +- drivers/usb/serial/mos7720.c | 37 +++++++++----------- drivers/usb/serial/mos7840.c | 52 +++++++++------------------- drivers/usb/serial/opticon.c | 2 - drivers/usb/serial/pl2303.c | 2 - drivers/usb/serial/quatech2.c | 7 +-- drivers/usb/serial/sierra.c | 2 - drivers/usb/serial/ti_usb_3410_5052.c | 10 ++--- drivers/usb/serial/usb-serial.c | 7 ++- drivers/usb/serial/usb_wwan.c | 2 - drivers/usb/serial/whiteheat.c | 20 +++++------ include/linux/usb/serial.h | 6 ++- 24 files changed, 133 insertions(+), 180 deletions(-)
2013-06-07 00:32:00 +07:00
dev_set_name(&port->dev, "ttyUSB%d", port->minor);
dev_dbg(ddev, "registering %s\n", dev_name(&port->dev));
device_enable_async_suspend(&port->dev);
retval = device_add(&port->dev);
if (retval)
dev_err(ddev, "Error registering port device, continuing\n");
}
USB: serial: fix race between probe and open Fix race between probe and open by making sure that the disconnected flag is not cleared until all ports have been registered. A call to tty_open while probe is running may get a reference to the serial structure in serial_install before its ports have been registered. This may lead to usb_serial_core calling driver open before port is fully initialised. With ftdi_sio this result in the following NULL-pointer dereference as the private data has not been initialised at open: [ 199.698286] IP: [<f811a089>] ftdi_open+0x59/0xe0 [ftdi_sio] [ 199.698297] *pde = 00000000 [ 199.698303] Oops: 0000 [#1] PREEMPT SMP [ 199.698313] Modules linked in: ftdi_sio usbserial [ 199.698323] [ 199.698327] Pid: 1146, comm: ftdi_open Not tainted 3.2.11 #70 Dell Inc. Vostro 1520/0T816J [ 199.698339] EIP: 0060:[<f811a089>] EFLAGS: 00010286 CPU: 0 [ 199.698344] EIP is at ftdi_open+0x59/0xe0 [ftdi_sio] [ 199.698348] EAX: 0000003e EBX: f5067000 ECX: 00000000 EDX: 80000600 [ 199.698352] ESI: f48d8800 EDI: 00000001 EBP: f515dd54 ESP: f515dcfc [ 199.698356] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 199.698361] Process ftdi_open (pid: 1146, ti=f515c000 task=f481e040 task.ti=f515c000) [ 199.698364] Stack: [ 199.698368] f811a9fe f811a9e0 f811b3ef 00000000 00000000 00001388 00000000 f4a86800 [ 199.698387] 00000002 00000000 f806e68e 00000000 f532765c f481e040 00000246 22222222 [ 199.698479] 22222222 22222222 22222222 f5067004 f5327600 f5327638 f515dd74 f806e6ab [ 199.698496] Call Trace: [ 199.698504] [<f806e68e>] ? serial_activate+0x2e/0x70 [usbserial] [ 199.698511] [<f806e6ab>] serial_activate+0x4b/0x70 [usbserial] [ 199.698521] [<c126380c>] tty_port_open+0x7c/0xd0 [ 199.698527] [<f806e660>] ? serial_set_termios+0xa0/0xa0 [usbserial] [ 199.698534] [<f806e76f>] serial_open+0x2f/0x70 [usbserial] [ 199.698540] [<c125d07c>] tty_open+0x20c/0x510 [ 199.698546] [<c10e9eb7>] chrdev_open+0xe7/0x230 [ 199.698553] [<c10e48f2>] __dentry_open+0x1f2/0x390 [ 199.698559] [<c144bfec>] ? _raw_spin_unlock+0x2c/0x50 [ 199.698565] [<c10e4b76>] nameidata_to_filp+0x66/0x80 [ 199.698570] [<c10e9dd0>] ? cdev_put+0x20/0x20 [ 199.698576] [<c10f3e08>] do_last+0x198/0x730 [ 199.698581] [<c10f4440>] path_openat+0xa0/0x350 [ 199.698587] [<c10f47d5>] do_filp_open+0x35/0x80 [ 199.698593] [<c144bfec>] ? _raw_spin_unlock+0x2c/0x50 [ 199.698599] [<c10ff110>] ? alloc_fd+0xc0/0x100 [ 199.698605] [<c10f0b72>] ? getname_flags+0x72/0x120 [ 199.698611] [<c10e4450>] do_sys_open+0xf0/0x1c0 [ 199.698617] [<c11fcc08>] ? trace_hardirqs_on_thunk+0xc/0x10 [ 199.698623] [<c10e458e>] sys_open+0x2e/0x40 [ 199.698628] [<c144c990>] sysenter_do_call+0x12/0x36 [ 199.698632] Code: 85 89 00 00 00 8b 16 8b 4d c0 c1 e2 08 c7 44 24 14 88 13 00 00 81 ca 00 00 00 80 c7 44 24 10 00 00 00 00 c7 44 24 0c 00 00 00 00 <0f> b7 41 78 31 c9 89 44 24 08 c7 44 24 04 00 00 00 00 c7 04 24 [ 199.698884] EIP: [<f811a089>] ftdi_open+0x59/0xe0 [ftdi_sio] SS:ESP 0068:f515dcfc [ 199.698893] CR2: 0000000000000078 [ 199.698925] ---[ end trace 77c43ec023940cff ]--- Reported-and-tested-by: Ken Huang <csuhgw@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-20 22:59:33 +07:00
serial->disconnected = 0;
usb_serial_console_init(serial->port[0]->minor);
exit:
module_put(type->driver.owner);
return 0;
probe_error:
usb_serial_put(serial);
module_put(type->driver.owner);
return -EIO;
}
USB: serial: remove usb_serial_disconnect call in all drivers This is now set by the usb-serial core, no need for the driver to individually set it. Thanks to Alan Stern for the idea to get rid of it. Cc: William Greathouse <wgreathouse@smva.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Peter Berger <pberger@brimson.com> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Oliver Neukum <oliver@neukum.name> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Support Department <support@connecttech.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Andrew Worsley <amworsley@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Dan Carpenter <error27@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Donald Lee <donald@asix.com.tw> Cc: Julia Lawall <julia@diku.dk> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: Wang YanQing <Udknight@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-08 04:02:13 +07:00
static void usb_serial_disconnect(struct usb_interface *interface)
{
int i;
struct usb_serial *serial = usb_get_intfdata(interface);
struct device *dev = &interface->dev;
struct usb_serial_port *port;
struct tty_struct *tty;
usb_serial_console_disconnect(serial);
mutex_lock(&serial->disc_mutex);
/* must set a flag, to signal subdrivers */
serial->disconnected = 1;
USB: serial: fix lifetime and locking problems This patch (as1229) fixes a few lifetime and locking problems in the usb-serial driver. The main symptom is that an invalid kevent is created when the serial device is unplugged while a connection is active. Ports should be unregistered when device is disconnected, not when the parent usb_serial structure is deallocated. Each open file should hold a reference to the corresponding port structure, and the reference should be released when the file is closed. serial->disc_mutex should be acquired in serial_open(), to resolve the classic race between open and disconnect. serial_close() doesn't need to hold both serial->disc_mutex and port->mutex at the same time. Release the subdriver's module reference only after releasing all the other references, in case one of the release routines needs to invoke some code in the subdriver module. Replace a call to flush_scheduled_work() (which is prone to deadlocks) with cancel_work_sync(). Also, add a call to cancel_work_sync() in the disconnect routine. Reduce the scope of serial->disc_mutex in serial_disconnect(). The only place it really needs to protect is where the "disconnected" flag is set. This fixes the bug reported in http://bugs.freedesktop.org/show_bug.cgi?id=20703 Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Dan Williams <dcbw@redhat.com> Tested-by: Ming Lei <tom.leiming@gmail.com> Reviewed-by: Oliver Neukum <oliver@neukum.org> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-14 22:31:02 +07:00
mutex_unlock(&serial->disc_mutex);
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
tty = tty_port_tty_get(&port->port);
if (tty) {
tty_vhangup(tty);
tty_kref_put(tty);
USB: serial: fix lifetime and locking problems This patch (as1229) fixes a few lifetime and locking problems in the usb-serial driver. The main symptom is that an invalid kevent is created when the serial device is unplugged while a connection is active. Ports should be unregistered when device is disconnected, not when the parent usb_serial structure is deallocated. Each open file should hold a reference to the corresponding port structure, and the reference should be released when the file is closed. serial->disc_mutex should be acquired in serial_open(), to resolve the classic race between open and disconnect. serial_close() doesn't need to hold both serial->disc_mutex and port->mutex at the same time. Release the subdriver's module reference only after releasing all the other references, in case one of the release routines needs to invoke some code in the subdriver module. Replace a call to flush_scheduled_work() (which is prone to deadlocks) with cancel_work_sync(). Also, add a call to cancel_work_sync() in the disconnect routine. Reduce the scope of serial->disc_mutex in serial_disconnect(). The only place it really needs to protect is where the "disconnected" flag is set. This fixes the bug reported in http://bugs.freedesktop.org/show_bug.cgi?id=20703 Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Dan Williams <dcbw@redhat.com> Tested-by: Ming Lei <tom.leiming@gmail.com> Reviewed-by: Oliver Neukum <oliver@neukum.org> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-14 22:31:02 +07:00
}
usb_serial_port_poison_urbs(port);
wake_up_interruptible(&port->port.delta_msr_wait);
cancel_work_sync(&port->work);
if (device_is_registered(&port->dev))
device_del(&port->dev);
USB: serial: fix lifetime and locking problems This patch (as1229) fixes a few lifetime and locking problems in the usb-serial driver. The main symptom is that an invalid kevent is created when the serial device is unplugged while a connection is active. Ports should be unregistered when device is disconnected, not when the parent usb_serial structure is deallocated. Each open file should hold a reference to the corresponding port structure, and the reference should be released when the file is closed. serial->disc_mutex should be acquired in serial_open(), to resolve the classic race between open and disconnect. serial_close() doesn't need to hold both serial->disc_mutex and port->mutex at the same time. Release the subdriver's module reference only after releasing all the other references, in case one of the release routines needs to invoke some code in the subdriver module. Replace a call to flush_scheduled_work() (which is prone to deadlocks) with cancel_work_sync(). Also, add a call to cancel_work_sync() in the disconnect routine. Reduce the scope of serial->disc_mutex in serial_disconnect(). The only place it really needs to protect is where the "disconnected" flag is set. This fixes the bug reported in http://bugs.freedesktop.org/show_bug.cgi?id=20703 Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Dan Williams <dcbw@redhat.com> Tested-by: Ming Lei <tom.leiming@gmail.com> Reviewed-by: Oliver Neukum <oliver@neukum.org> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-14 22:31:02 +07:00
}
if (serial->type->disconnect)
serial->type->disconnect(serial);
USB: serial: fix lifetime and locking problems This patch (as1229) fixes a few lifetime and locking problems in the usb-serial driver. The main symptom is that an invalid kevent is created when the serial device is unplugged while a connection is active. Ports should be unregistered when device is disconnected, not when the parent usb_serial structure is deallocated. Each open file should hold a reference to the corresponding port structure, and the reference should be released when the file is closed. serial->disc_mutex should be acquired in serial_open(), to resolve the classic race between open and disconnect. serial_close() doesn't need to hold both serial->disc_mutex and port->mutex at the same time. Release the subdriver's module reference only after releasing all the other references, in case one of the release routines needs to invoke some code in the subdriver module. Replace a call to flush_scheduled_work() (which is prone to deadlocks) with cancel_work_sync(). Also, add a call to cancel_work_sync() in the disconnect routine. Reduce the scope of serial->disc_mutex in serial_disconnect(). The only place it really needs to protect is where the "disconnected" flag is set. This fixes the bug reported in http://bugs.freedesktop.org/show_bug.cgi?id=20703 Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Dan Williams <dcbw@redhat.com> Tested-by: Ming Lei <tom.leiming@gmail.com> Reviewed-by: Oliver Neukum <oliver@neukum.org> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-14 22:31:02 +07:00
/* let the last holder of this object cause it to be cleaned up */
usb_serial_put(serial);
dev_info(dev, "device disconnected\n");
}
int usb_serial_suspend(struct usb_interface *intf, pm_message_t message)
{
struct usb_serial *serial = usb_get_intfdata(intf);
int i, r = 0;
serial->suspending = 1;
/*
* serial->type->suspend() MUST return 0 in system sleep context,
* otherwise, the resume callback has to recover device from
* previous suspend failure.
*/
if (serial->type->suspend) {
r = serial->type->suspend(serial, message);
if (r < 0) {
serial->suspending = 0;
goto err_out;
}
}
for (i = 0; i < serial->num_ports; ++i)
usb_serial_port_poison_urbs(serial->port[i]);
err_out:
return r;
}
EXPORT_SYMBOL(usb_serial_suspend);
static void usb_serial_unpoison_port_urbs(struct usb_serial *serial)
{
int i;
for (i = 0; i < serial->num_ports; ++i)
usb_serial_port_unpoison_urbs(serial->port[i]);
}
int usb_serial_resume(struct usb_interface *intf)
{
struct usb_serial *serial = usb_get_intfdata(intf);
int rv;
usb_serial_unpoison_port_urbs(serial);
serial->suspending = 0;
if (serial->type->resume)
rv = serial->type->resume(serial);
else
rv = usb_serial_generic_resume(serial);
return rv;
}
EXPORT_SYMBOL(usb_serial_resume);
static int usb_serial_reset_resume(struct usb_interface *intf)
{
struct usb_serial *serial = usb_get_intfdata(intf);
int rv;
usb_serial_unpoison_port_urbs(serial);
serial->suspending = 0;
if (serial->type->reset_resume) {
rv = serial->type->reset_resume(serial);
} else {
rv = -EOPNOTSUPP;
intf->needs_binding = 1;
}
return rv;
}
static const struct tty_operations serial_ops = {
.open = serial_open,
.close = serial_close,
.write = serial_write,
.hangup = serial_hangup,
.write_room = serial_write_room,
.ioctl = serial_ioctl,
.set_termios = serial_set_termios,
.throttle = serial_throttle,
.unthrottle = serial_unthrottle,
.break_ctl = serial_break,
.chars_in_buffer = serial_chars_in_buffer,
.wait_until_sent = serial_wait_until_sent,
.tiocmget = serial_tiocmget,
.tiocmset = serial_tiocmset,
.get_icount = serial_get_icount,
.cleanup = serial_cleanup,
.install = serial_install,
.proc_fops = &serial_proc_fops,
};
struct tty_driver *usb_serial_tty_driver;
USB: serial: remove usb_serial_disconnect call in all drivers This is now set by the usb-serial core, no need for the driver to individually set it. Thanks to Alan Stern for the idea to get rid of it. Cc: William Greathouse <wgreathouse@smva.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Peter Berger <pberger@brimson.com> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Oliver Neukum <oliver@neukum.name> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Support Department <support@connecttech.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Andrew Worsley <amworsley@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Dan Carpenter <error27@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Donald Lee <donald@asix.com.tw> Cc: Julia Lawall <julia@diku.dk> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: Wang YanQing <Udknight@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-08 04:02:13 +07:00
/* Driver structure we register with the USB core */
static struct usb_driver usb_serial_driver = {
.name = "usbserial",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
.suspend = usb_serial_suspend,
.resume = usb_serial_resume,
.no_dynamic_id = 1,
.supports_autosuspend = 1,
};
static int __init usb_serial_init(void)
{
int result;
usb_serial_tty_driver = alloc_tty_driver(USB_SERIAL_TTY_MINORS);
if (!usb_serial_tty_driver)
return -ENOMEM;
/* Initialize our global data */
result = bus_register(&usb_serial_bus_type);
if (result) {
pr_err("%s - registering bus driver failed\n", __func__);
goto exit_bus;
}
usb_serial_tty_driver->driver_name = "usbserial";
usb_serial_tty_driver->name = "ttyUSB";
usb_serial_tty_driver->major = USB_SERIAL_TTY_MAJOR;
usb_serial_tty_driver->minor_start = 0;
usb_serial_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
usb_serial_tty_driver->subtype = SERIAL_TYPE_NORMAL;
usb_serial_tty_driver->flags = TTY_DRIVER_REAL_RAW |
TTY_DRIVER_DYNAMIC_DEV;
usb_serial_tty_driver->init_termios = tty_std_termios;
usb_serial_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD
| HUPCL | CLOCAL;
usb_serial_tty_driver->init_termios.c_ispeed = 9600;
usb_serial_tty_driver->init_termios.c_ospeed = 9600;
tty_set_operations(usb_serial_tty_driver, &serial_ops);
result = tty_register_driver(usb_serial_tty_driver);
if (result) {
pr_err("%s - tty_register_driver failed\n", __func__);
goto exit_reg_driver;
}
/* register the USB driver */
result = usb_register(&usb_serial_driver);
if (result < 0) {
pr_err("%s - usb_register failed\n", __func__);
goto exit_tty;
}
/* register the generic driver, if we should */
result = usb_serial_generic_register();
if (result < 0) {
pr_err("%s - registering generic driver failed\n", __func__);
goto exit_generic;
}
return result;
exit_generic:
usb_deregister(&usb_serial_driver);
exit_tty:
tty_unregister_driver(usb_serial_tty_driver);
exit_reg_driver:
bus_unregister(&usb_serial_bus_type);
exit_bus:
pr_err("%s - returning with error %d\n", __func__, result);
put_tty_driver(usb_serial_tty_driver);
return result;
}
static void __exit usb_serial_exit(void)
{
usb_serial_console_exit();
usb_serial_generic_deregister();
usb_deregister(&usb_serial_driver);
tty_unregister_driver(usb_serial_tty_driver);
put_tty_driver(usb_serial_tty_driver);
bus_unregister(&usb_serial_bus_type);
}
module_init(usb_serial_init);
module_exit(usb_serial_exit);
#define set_to_generic_if_null(type, function) \
do { \
if (!type->function) { \
type->function = usb_serial_generic_##function; \
pr_debug("%s: using generic " #function "\n", \
type->driver.name); \
} \
} while (0)
static void usb_serial_operations_init(struct usb_serial_driver *device)
{
set_to_generic_if_null(device, open);
set_to_generic_if_null(device, write);
set_to_generic_if_null(device, close);
set_to_generic_if_null(device, write_room);
set_to_generic_if_null(device, chars_in_buffer);
if (device->tx_empty)
set_to_generic_if_null(device, wait_until_sent);
set_to_generic_if_null(device, read_bulk_callback);
set_to_generic_if_null(device, write_bulk_callback);
set_to_generic_if_null(device, process_read_urb);
set_to_generic_if_null(device, prepare_write_buffer);
}
static int usb_serial_register(struct usb_serial_driver *driver)
{
int retval;
if (usb_disabled())
return -ENODEV;
if (!driver->description)
driver->description = driver->driver.name;
if (!driver->usb_driver) {
WARN(1, "Serial driver %s has no usb_driver\n",
driver->description);
return -EINVAL;
}
usb_serial_operations_init(driver);
/* Add this device to our list of devices */
mutex_lock(&table_lock);
list_add(&driver->driver_list, &usb_serial_driver_list);
retval = usb_serial_bus_register(driver);
if (retval) {
pr_err("problem %d when registering driver %s\n", retval, driver->description);
list_del(&driver->driver_list);
} else {
pr_info("USB Serial support registered for %s\n", driver->description);
}
mutex_unlock(&table_lock);
return retval;
}
static void usb_serial_deregister(struct usb_serial_driver *device)
{
pr_info("USB Serial deregistering driver %s\n", device->description);
USB: serial: fix sysfs-attribute removal deadlock Fix driver new_id sysfs-attribute removal deadlock by making sure to not hold any locks that the attribute operations grab when removing the attribute. Specifically, usb_serial_deregister holds the table mutex when deregistering the driver, which includes removing the new_id attribute. This can lead to a deadlock as writing to new_id increments the attribute's active count before trying to grab the same mutex in usb_serial_probe. The deadlock can easily be triggered by inserting a sleep in usb_serial_deregister and writing the id of an unbound device to new_id during module unload. As the table mutex (in this case) is used to prevent subdriver unload during probe, it should be sufficient to only hold the lock while manipulating the usb-serial driver list during deregister. A racing probe will then either fail to find a matching subdriver or fail to get the corresponding module reference. Since v3.15-rc1 this also triggers the following lockdep warning: ====================================================== [ INFO: possible circular locking dependency detected ] 3.15.0-rc2 #123 Tainted: G W ------------------------------------------------------- modprobe/190 is trying to acquire lock: (s_active#4){++++.+}, at: [<c0167aa0>] kernfs_remove_by_name_ns+0x4c/0x94 but task is already holding lock: (table_lock){+.+.+.}, at: [<bf004d84>] usb_serial_deregister+0x3c/0x78 [usbserial] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (table_lock){+.+.+.}: [<c0075f84>] __lock_acquire+0x1694/0x1ce4 [<c0076de8>] lock_acquire+0xb4/0x154 [<c03af3cc>] _raw_spin_lock+0x4c/0x5c [<c02bbc24>] usb_store_new_id+0x14c/0x1ac [<bf007eb4>] new_id_store+0x68/0x70 [usbserial] [<c025f568>] drv_attr_store+0x30/0x3c [<c01690e0>] sysfs_kf_write+0x5c/0x60 [<c01682c0>] kernfs_fop_write+0xd4/0x194 [<c010881c>] vfs_write+0xbc/0x198 [<c0108e4c>] SyS_write+0x4c/0xa0 [<c000f880>] ret_fast_syscall+0x0/0x48 -> #0 (s_active#4){++++.+}: [<c03a7a28>] print_circular_bug+0x68/0x2f8 [<c0076218>] __lock_acquire+0x1928/0x1ce4 [<c0076de8>] lock_acquire+0xb4/0x154 [<c0166b70>] __kernfs_remove+0x254/0x310 [<c0167aa0>] kernfs_remove_by_name_ns+0x4c/0x94 [<c0169fb8>] remove_files.isra.1+0x48/0x84 [<c016a2fc>] sysfs_remove_group+0x58/0xac [<c016a414>] sysfs_remove_groups+0x34/0x44 [<c02623b8>] driver_remove_groups+0x1c/0x20 [<c0260e9c>] bus_remove_driver+0x3c/0xe4 [<c026235c>] driver_unregister+0x38/0x58 [<bf007fb4>] usb_serial_bus_deregister+0x84/0x88 [usbserial] [<bf004db4>] usb_serial_deregister+0x6c/0x78 [usbserial] [<bf005330>] usb_serial_deregister_drivers+0x2c/0x4c [usbserial] [<bf016618>] usb_serial_module_exit+0x14/0x1c [sierra] [<c009d6cc>] SyS_delete_module+0x184/0x210 [<c000f880>] ret_fast_syscall+0x0/0x48 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(table_lock); lock(s_active#4); lock(table_lock); lock(s_active#4); *** DEADLOCK *** 1 lock held by modprobe/190: #0: (table_lock){+.+.+.}, at: [<bf004d84>] usb_serial_deregister+0x3c/0x78 [usbserial] stack backtrace: CPU: 0 PID: 190 Comm: modprobe Tainted: G W 3.15.0-rc2 #123 [<c0015e10>] (unwind_backtrace) from [<c0013728>] (show_stack+0x20/0x24) [<c0013728>] (show_stack) from [<c03a9a54>] (dump_stack+0x24/0x28) [<c03a9a54>] (dump_stack) from [<c03a7cac>] (print_circular_bug+0x2ec/0x2f8) [<c03a7cac>] (print_circular_bug) from [<c0076218>] (__lock_acquire+0x1928/0x1ce4) [<c0076218>] (__lock_acquire) from [<c0076de8>] (lock_acquire+0xb4/0x154) [<c0076de8>] (lock_acquire) from [<c0166b70>] (__kernfs_remove+0x254/0x310) [<c0166b70>] (__kernfs_remove) from [<c0167aa0>] (kernfs_remove_by_name_ns+0x4c/0x94) [<c0167aa0>] (kernfs_remove_by_name_ns) from [<c0169fb8>] (remove_files.isra.1+0x48/0x84) [<c0169fb8>] (remove_files.isra.1) from [<c016a2fc>] (sysfs_remove_group+0x58/0xac) [<c016a2fc>] (sysfs_remove_group) from [<c016a414>] (sysfs_remove_groups+0x34/0x44) [<c016a414>] (sysfs_remove_groups) from [<c02623b8>] (driver_remove_groups+0x1c/0x20) [<c02623b8>] (driver_remove_groups) from [<c0260e9c>] (bus_remove_driver+0x3c/0xe4) [<c0260e9c>] (bus_remove_driver) from [<c026235c>] (driver_unregister+0x38/0x58) [<c026235c>] (driver_unregister) from [<bf007fb4>] (usb_serial_bus_deregister+0x84/0x88 [usbserial]) [<bf007fb4>] (usb_serial_bus_deregister [usbserial]) from [<bf004db4>] (usb_serial_deregister+0x6c/0x78 [usbserial]) [<bf004db4>] (usb_serial_deregister [usbserial]) from [<bf005330>] (usb_serial_deregister_drivers+0x2c/0x4c [usbserial]) [<bf005330>] (usb_serial_deregister_drivers [usbserial]) from [<bf016618>] (usb_serial_module_exit+0x14/0x1c [sierra]) [<bf016618>] (usb_serial_module_exit [sierra]) from [<c009d6cc>] (SyS_delete_module+0x184/0x210) [<c009d6cc>] (SyS_delete_module) from [<c000f880>] (ret_fast_syscall+0x0/0x48) Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-23 16:32:19 +07:00
mutex_lock(&table_lock);
list_del(&device->driver_list);
mutex_unlock(&table_lock);
USB: serial: fix sysfs-attribute removal deadlock Fix driver new_id sysfs-attribute removal deadlock by making sure to not hold any locks that the attribute operations grab when removing the attribute. Specifically, usb_serial_deregister holds the table mutex when deregistering the driver, which includes removing the new_id attribute. This can lead to a deadlock as writing to new_id increments the attribute's active count before trying to grab the same mutex in usb_serial_probe. The deadlock can easily be triggered by inserting a sleep in usb_serial_deregister and writing the id of an unbound device to new_id during module unload. As the table mutex (in this case) is used to prevent subdriver unload during probe, it should be sufficient to only hold the lock while manipulating the usb-serial driver list during deregister. A racing probe will then either fail to find a matching subdriver or fail to get the corresponding module reference. Since v3.15-rc1 this also triggers the following lockdep warning: ====================================================== [ INFO: possible circular locking dependency detected ] 3.15.0-rc2 #123 Tainted: G W ------------------------------------------------------- modprobe/190 is trying to acquire lock: (s_active#4){++++.+}, at: [<c0167aa0>] kernfs_remove_by_name_ns+0x4c/0x94 but task is already holding lock: (table_lock){+.+.+.}, at: [<bf004d84>] usb_serial_deregister+0x3c/0x78 [usbserial] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (table_lock){+.+.+.}: [<c0075f84>] __lock_acquire+0x1694/0x1ce4 [<c0076de8>] lock_acquire+0xb4/0x154 [<c03af3cc>] _raw_spin_lock+0x4c/0x5c [<c02bbc24>] usb_store_new_id+0x14c/0x1ac [<bf007eb4>] new_id_store+0x68/0x70 [usbserial] [<c025f568>] drv_attr_store+0x30/0x3c [<c01690e0>] sysfs_kf_write+0x5c/0x60 [<c01682c0>] kernfs_fop_write+0xd4/0x194 [<c010881c>] vfs_write+0xbc/0x198 [<c0108e4c>] SyS_write+0x4c/0xa0 [<c000f880>] ret_fast_syscall+0x0/0x48 -> #0 (s_active#4){++++.+}: [<c03a7a28>] print_circular_bug+0x68/0x2f8 [<c0076218>] __lock_acquire+0x1928/0x1ce4 [<c0076de8>] lock_acquire+0xb4/0x154 [<c0166b70>] __kernfs_remove+0x254/0x310 [<c0167aa0>] kernfs_remove_by_name_ns+0x4c/0x94 [<c0169fb8>] remove_files.isra.1+0x48/0x84 [<c016a2fc>] sysfs_remove_group+0x58/0xac [<c016a414>] sysfs_remove_groups+0x34/0x44 [<c02623b8>] driver_remove_groups+0x1c/0x20 [<c0260e9c>] bus_remove_driver+0x3c/0xe4 [<c026235c>] driver_unregister+0x38/0x58 [<bf007fb4>] usb_serial_bus_deregister+0x84/0x88 [usbserial] [<bf004db4>] usb_serial_deregister+0x6c/0x78 [usbserial] [<bf005330>] usb_serial_deregister_drivers+0x2c/0x4c [usbserial] [<bf016618>] usb_serial_module_exit+0x14/0x1c [sierra] [<c009d6cc>] SyS_delete_module+0x184/0x210 [<c000f880>] ret_fast_syscall+0x0/0x48 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(table_lock); lock(s_active#4); lock(table_lock); lock(s_active#4); *** DEADLOCK *** 1 lock held by modprobe/190: #0: (table_lock){+.+.+.}, at: [<bf004d84>] usb_serial_deregister+0x3c/0x78 [usbserial] stack backtrace: CPU: 0 PID: 190 Comm: modprobe Tainted: G W 3.15.0-rc2 #123 [<c0015e10>] (unwind_backtrace) from [<c0013728>] (show_stack+0x20/0x24) [<c0013728>] (show_stack) from [<c03a9a54>] (dump_stack+0x24/0x28) [<c03a9a54>] (dump_stack) from [<c03a7cac>] (print_circular_bug+0x2ec/0x2f8) [<c03a7cac>] (print_circular_bug) from [<c0076218>] (__lock_acquire+0x1928/0x1ce4) [<c0076218>] (__lock_acquire) from [<c0076de8>] (lock_acquire+0xb4/0x154) [<c0076de8>] (lock_acquire) from [<c0166b70>] (__kernfs_remove+0x254/0x310) [<c0166b70>] (__kernfs_remove) from [<c0167aa0>] (kernfs_remove_by_name_ns+0x4c/0x94) [<c0167aa0>] (kernfs_remove_by_name_ns) from [<c0169fb8>] (remove_files.isra.1+0x48/0x84) [<c0169fb8>] (remove_files.isra.1) from [<c016a2fc>] (sysfs_remove_group+0x58/0xac) [<c016a2fc>] (sysfs_remove_group) from [<c016a414>] (sysfs_remove_groups+0x34/0x44) [<c016a414>] (sysfs_remove_groups) from [<c02623b8>] (driver_remove_groups+0x1c/0x20) [<c02623b8>] (driver_remove_groups) from [<c0260e9c>] (bus_remove_driver+0x3c/0xe4) [<c0260e9c>] (bus_remove_driver) from [<c026235c>] (driver_unregister+0x38/0x58) [<c026235c>] (driver_unregister) from [<bf007fb4>] (usb_serial_bus_deregister+0x84/0x88 [usbserial]) [<bf007fb4>] (usb_serial_bus_deregister [usbserial]) from [<bf004db4>] (usb_serial_deregister+0x6c/0x78 [usbserial]) [<bf004db4>] (usb_serial_deregister [usbserial]) from [<bf005330>] (usb_serial_deregister_drivers+0x2c/0x4c [usbserial]) [<bf005330>] (usb_serial_deregister_drivers [usbserial]) from [<bf016618>] (usb_serial_module_exit+0x14/0x1c [sierra]) [<bf016618>] (usb_serial_module_exit [sierra]) from [<c009d6cc>] (SyS_delete_module+0x184/0x210) [<c009d6cc>] (SyS_delete_module) from [<c000f880>] (ret_fast_syscall+0x0/0x48) Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-23 16:32:19 +07:00
usb_serial_bus_deregister(device);
}
/**
* usb_serial_register_drivers - register drivers for a usb-serial module
* @serial_drivers: NULL-terminated array of pointers to drivers to be registered
USB: serial: rework usb_serial_register/deregister_drivers() This reworks the usb_serial_register_drivers() and usb_serial_deregister_drivers() to not need a pointer to a struct usb_driver anymore. The usb_driver structure is now created dynamically and registered and unregistered as needed. This saves lines of code in each usb-serial driver. All in-kernel users of these functions were also fixed up at this time. The pl2303 driver was tested that everything worked properly. Thanks for the idea to do this from Alan Stern. Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Worsley <amworsley@gmail.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Dan Carpenter <error27@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Donald Lee <donald@asix.com.tw> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Julia Lawall <julia@diku.dk> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Oliver Neukum <oliver@neukum.name> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Berger <pberger@brimson.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Support Department <support@connecttech.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Wang YanQing <Udknight@gmail.com> Cc: William Greathouse <wgreathouse@smva.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09 05:46:14 +07:00
* @name: name of the usb_driver for this set of @serial_drivers
* @id_table: list of all devices this @serial_drivers set binds to
*
USB: serial: rework usb_serial_register/deregister_drivers() This reworks the usb_serial_register_drivers() and usb_serial_deregister_drivers() to not need a pointer to a struct usb_driver anymore. The usb_driver structure is now created dynamically and registered and unregistered as needed. This saves lines of code in each usb-serial driver. All in-kernel users of these functions were also fixed up at this time. The pl2303 driver was tested that everything worked properly. Thanks for the idea to do this from Alan Stern. Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Worsley <amworsley@gmail.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Dan Carpenter <error27@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Donald Lee <donald@asix.com.tw> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Julia Lawall <julia@diku.dk> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Oliver Neukum <oliver@neukum.name> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Berger <pberger@brimson.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Support Department <support@connecttech.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Wang YanQing <Udknight@gmail.com> Cc: William Greathouse <wgreathouse@smva.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09 05:46:14 +07:00
* Registers all the drivers in the @serial_drivers array, and dynamically
* creates a struct usb_driver with the name @name and id_table of @id_table.
*/
USB: serial: rework usb_serial_register/deregister_drivers() This reworks the usb_serial_register_drivers() and usb_serial_deregister_drivers() to not need a pointer to a struct usb_driver anymore. The usb_driver structure is now created dynamically and registered and unregistered as needed. This saves lines of code in each usb-serial driver. All in-kernel users of these functions were also fixed up at this time. The pl2303 driver was tested that everything worked properly. Thanks for the idea to do this from Alan Stern. Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Worsley <amworsley@gmail.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Dan Carpenter <error27@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Donald Lee <donald@asix.com.tw> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Julia Lawall <julia@diku.dk> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Oliver Neukum <oliver@neukum.name> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Berger <pberger@brimson.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Support Department <support@connecttech.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Wang YanQing <Udknight@gmail.com> Cc: William Greathouse <wgreathouse@smva.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09 05:46:14 +07:00
int usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[],
const char *name,
const struct usb_device_id *id_table)
{
int rc;
USB: serial: rework usb_serial_register/deregister_drivers() This reworks the usb_serial_register_drivers() and usb_serial_deregister_drivers() to not need a pointer to a struct usb_driver anymore. The usb_driver structure is now created dynamically and registered and unregistered as needed. This saves lines of code in each usb-serial driver. All in-kernel users of these functions were also fixed up at this time. The pl2303 driver was tested that everything worked properly. Thanks for the idea to do this from Alan Stern. Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Worsley <amworsley@gmail.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Dan Carpenter <error27@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Donald Lee <donald@asix.com.tw> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Julia Lawall <julia@diku.dk> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Oliver Neukum <oliver@neukum.name> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Berger <pberger@brimson.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Support Department <support@connecttech.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Wang YanQing <Udknight@gmail.com> Cc: William Greathouse <wgreathouse@smva.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09 05:46:14 +07:00
struct usb_driver *udriver;
struct usb_serial_driver * const *sd;
/*
* udriver must be registered before any of the serial drivers,
* because the store_new_id() routine for the serial drivers (in
* bus.c) probes udriver.
*
* Performance hack: We don't want udriver to be probed until
* the serial drivers are registered, because the probe would
* simply fail for lack of a matching serial driver.
USB: serial: rework usb_serial_register/deregister_drivers() This reworks the usb_serial_register_drivers() and usb_serial_deregister_drivers() to not need a pointer to a struct usb_driver anymore. The usb_driver structure is now created dynamically and registered and unregistered as needed. This saves lines of code in each usb-serial driver. All in-kernel users of these functions were also fixed up at this time. The pl2303 driver was tested that everything worked properly. Thanks for the idea to do this from Alan Stern. Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Worsley <amworsley@gmail.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Dan Carpenter <error27@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Donald Lee <donald@asix.com.tw> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Julia Lawall <julia@diku.dk> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Oliver Neukum <oliver@neukum.name> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Berger <pberger@brimson.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Support Department <support@connecttech.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Wang YanQing <Udknight@gmail.com> Cc: William Greathouse <wgreathouse@smva.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09 05:46:14 +07:00
* So we leave udriver's id_table set to NULL until we are all set.
*
* Suspend/resume support is implemented in the usb-serial core,
* so fill in the PM-related fields in udriver.
*/
USB: serial: rework usb_serial_register/deregister_drivers() This reworks the usb_serial_register_drivers() and usb_serial_deregister_drivers() to not need a pointer to a struct usb_driver anymore. The usb_driver structure is now created dynamically and registered and unregistered as needed. This saves lines of code in each usb-serial driver. All in-kernel users of these functions were also fixed up at this time. The pl2303 driver was tested that everything worked properly. Thanks for the idea to do this from Alan Stern. Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Worsley <amworsley@gmail.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Dan Carpenter <error27@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Donald Lee <donald@asix.com.tw> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Julia Lawall <julia@diku.dk> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Oliver Neukum <oliver@neukum.name> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Berger <pberger@brimson.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Support Department <support@connecttech.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Wang YanQing <Udknight@gmail.com> Cc: William Greathouse <wgreathouse@smva.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09 05:46:14 +07:00
udriver = kzalloc(sizeof(*udriver), GFP_KERNEL);
if (!udriver)
return -ENOMEM;
USB: serial: rework usb_serial_register/deregister_drivers() This reworks the usb_serial_register_drivers() and usb_serial_deregister_drivers() to not need a pointer to a struct usb_driver anymore. The usb_driver structure is now created dynamically and registered and unregistered as needed. This saves lines of code in each usb-serial driver. All in-kernel users of these functions were also fixed up at this time. The pl2303 driver was tested that everything worked properly. Thanks for the idea to do this from Alan Stern. Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Worsley <amworsley@gmail.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Dan Carpenter <error27@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Donald Lee <donald@asix.com.tw> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Julia Lawall <julia@diku.dk> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Oliver Neukum <oliver@neukum.name> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Berger <pberger@brimson.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Support Department <support@connecttech.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Wang YanQing <Udknight@gmail.com> Cc: William Greathouse <wgreathouse@smva.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09 05:46:14 +07:00
udriver->name = name;
udriver->no_dynamic_id = 1;
udriver->supports_autosuspend = 1;
udriver->suspend = usb_serial_suspend;
udriver->resume = usb_serial_resume;
USB: serial: remove usb_serial_probe call in all drivers This is now set by the usb-serial core, no need for the driver to individually set it. Thanks to Alan Stern for the idea to get rid of it. Cc: William Greathouse <wgreathouse@smva.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Peter Berger <pberger@brimson.com> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Oliver Neukum <oliver@neukum.name> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Support Department <support@connecttech.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Andrew Worsley <amworsley@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Dan Carpenter <error27@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Donald Lee <donald@asix.com.tw> Cc: Julia Lawall <julia@diku.dk> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: Wang YanQing <Udknight@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-08 03:48:33 +07:00
udriver->probe = usb_serial_probe;
USB: serial: remove usb_serial_disconnect call in all drivers This is now set by the usb-serial core, no need for the driver to individually set it. Thanks to Alan Stern for the idea to get rid of it. Cc: William Greathouse <wgreathouse@smva.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Peter Berger <pberger@brimson.com> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Oliver Neukum <oliver@neukum.name> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Support Department <support@connecttech.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Andrew Worsley <amworsley@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Dan Carpenter <error27@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Donald Lee <donald@asix.com.tw> Cc: Julia Lawall <julia@diku.dk> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: Wang YanQing <Udknight@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-08 04:02:13 +07:00
udriver->disconnect = usb_serial_disconnect;
/* we only set the reset_resume field if the serial_driver has one */
for (sd = serial_drivers; *sd; ++sd) {
if ((*sd)->reset_resume) {
udriver->reset_resume = usb_serial_reset_resume;
break;
}
}
rc = usb_register(udriver);
if (rc)
return rc;
for (sd = serial_drivers; *sd; ++sd) {
(*sd)->usb_driver = udriver;
rc = usb_serial_register(*sd);
if (rc)
goto failed;
}
USB: serial: rework usb_serial_register/deregister_drivers() This reworks the usb_serial_register_drivers() and usb_serial_deregister_drivers() to not need a pointer to a struct usb_driver anymore. The usb_driver structure is now created dynamically and registered and unregistered as needed. This saves lines of code in each usb-serial driver. All in-kernel users of these functions were also fixed up at this time. The pl2303 driver was tested that everything worked properly. Thanks for the idea to do this from Alan Stern. Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Worsley <amworsley@gmail.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Dan Carpenter <error27@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Donald Lee <donald@asix.com.tw> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Julia Lawall <julia@diku.dk> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Oliver Neukum <oliver@neukum.name> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Berger <pberger@brimson.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Support Department <support@connecttech.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Wang YanQing <Udknight@gmail.com> Cc: William Greathouse <wgreathouse@smva.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09 05:46:14 +07:00
/* Now set udriver's id_table and look for matches */
udriver->id_table = id_table;
rc = driver_attach(&udriver->drvwrap.driver);
return 0;
failed:
while (sd-- > serial_drivers)
usb_serial_deregister(*sd);
usb_deregister(udriver);
return rc;
}
EXPORT_SYMBOL_GPL(usb_serial_register_drivers);
/**
* usb_serial_deregister_drivers - deregister drivers for a usb-serial module
* @serial_drivers: NULL-terminated array of pointers to drivers to be deregistered
*
USB: serial: rework usb_serial_register/deregister_drivers() This reworks the usb_serial_register_drivers() and usb_serial_deregister_drivers() to not need a pointer to a struct usb_driver anymore. The usb_driver structure is now created dynamically and registered and unregistered as needed. This saves lines of code in each usb-serial driver. All in-kernel users of these functions were also fixed up at this time. The pl2303 driver was tested that everything worked properly. Thanks for the idea to do this from Alan Stern. Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Worsley <amworsley@gmail.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Dan Carpenter <error27@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Donald Lee <donald@asix.com.tw> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Julia Lawall <julia@diku.dk> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Oliver Neukum <oliver@neukum.name> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Berger <pberger@brimson.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Support Department <support@connecttech.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Wang YanQing <Udknight@gmail.com> Cc: William Greathouse <wgreathouse@smva.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09 05:46:14 +07:00
* Deregisters all the drivers in the @serial_drivers array and deregisters and
* frees the struct usb_driver that was created by the call to
* usb_serial_register_drivers().
*/
USB: serial: rework usb_serial_register/deregister_drivers() This reworks the usb_serial_register_drivers() and usb_serial_deregister_drivers() to not need a pointer to a struct usb_driver anymore. The usb_driver structure is now created dynamically and registered and unregistered as needed. This saves lines of code in each usb-serial driver. All in-kernel users of these functions were also fixed up at this time. The pl2303 driver was tested that everything worked properly. Thanks for the idea to do this from Alan Stern. Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Worsley <amworsley@gmail.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Dan Carpenter <error27@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Donald Lee <donald@asix.com.tw> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Julia Lawall <julia@diku.dk> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Oliver Neukum <oliver@neukum.name> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Berger <pberger@brimson.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Support Department <support@connecttech.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Wang YanQing <Udknight@gmail.com> Cc: William Greathouse <wgreathouse@smva.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09 05:46:14 +07:00
void usb_serial_deregister_drivers(struct usb_serial_driver *const serial_drivers[])
{
USB: serial: rework usb_serial_register/deregister_drivers() This reworks the usb_serial_register_drivers() and usb_serial_deregister_drivers() to not need a pointer to a struct usb_driver anymore. The usb_driver structure is now created dynamically and registered and unregistered as needed. This saves lines of code in each usb-serial driver. All in-kernel users of these functions were also fixed up at this time. The pl2303 driver was tested that everything worked properly. Thanks for the idea to do this from Alan Stern. Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Worsley <amworsley@gmail.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Dan Carpenter <error27@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Donald Lee <donald@asix.com.tw> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Julia Lawall <julia@diku.dk> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Oliver Neukum <oliver@neukum.name> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Berger <pberger@brimson.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Support Department <support@connecttech.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Wang YanQing <Udknight@gmail.com> Cc: William Greathouse <wgreathouse@smva.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09 05:46:14 +07:00
struct usb_driver *udriver = (*serial_drivers)->usb_driver;
for (; *serial_drivers; ++serial_drivers)
usb_serial_deregister(*serial_drivers);
usb_deregister(udriver);
USB: serial: rework usb_serial_register/deregister_drivers() This reworks the usb_serial_register_drivers() and usb_serial_deregister_drivers() to not need a pointer to a struct usb_driver anymore. The usb_driver structure is now created dynamically and registered and unregistered as needed. This saves lines of code in each usb-serial driver. All in-kernel users of these functions were also fixed up at this time. The pl2303 driver was tested that everything worked properly. Thanks for the idea to do this from Alan Stern. Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Worsley <amworsley@gmail.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Dan Carpenter <error27@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Donald Lee <donald@asix.com.tw> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Julia Lawall <julia@diku.dk> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Oliver Neukum <oliver@neukum.name> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Berger <pberger@brimson.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Support Department <support@connecttech.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Wang YanQing <Udknight@gmail.com> Cc: William Greathouse <wgreathouse@smva.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09 05:46:14 +07:00
kfree(udriver);
}
EXPORT_SYMBOL_GPL(usb_serial_deregister_drivers);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");