linux_dsm_epyc7002/arch/x86/mm/pgtable.c

878 lines
21 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 21:07:57 +07:00
// SPDX-License-Identifier: GPL-2.0
#include <linux/mm.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 15:04:11 +07:00
#include <linux/gfp.h>
x86/pgtable: Don't set huge PUD/PMD on non-leaf entries The pmd_set_huge() and pud_set_huge() functions are used from the generic ioremap() code to establish large mappings where this is possible. But the generic ioremap() code does not check whether the PMD/PUD entries are already populated with a non-leaf entry, so that any page-table pages these entries point to will be lost. Further, on x86-32 with SHARED_KERNEL_PMD=0, this causes a BUG_ON() in vmalloc_sync_one() when PMD entries are synced from swapper_pg_dir to the current page-table. This happens because the PMD entry from swapper_pg_dir was promoted to a huge-page entry while the current PGD still contains the non-leaf entry. Because both entries are present and point to a different page, the BUG_ON() triggers. This was actually triggered with pti-x32 enabled in a KVM virtual machine by the graphics driver. A real and better fix for that would be to improve the page-table handling in the generic ioremap() code. But that is out-of-scope for this patch-set and left for later work. Reported-by: David H. Gutteridge <dhgutteridge@sympatico.ca> Signed-off-by: Joerg Roedel <jroedel@suse.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Waiman Long <llong@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180411152437.GC15462@8bytes.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-11 22:24:38 +07:00
#include <linux/hugetlb.h>
#include <asm/pgalloc.h>
#include <asm/tlb.h>
#include <asm/fixmap.h>
x86, mm: support huge KVA mappings on x86 Implement huge KVA mapping interfaces on x86. On x86, MTRRs can override PAT memory types with a 4KB granularity. When using a huge page, MTRRs can override the memory type of the huge page, which may lead a performance penalty. The processor can also behave in an undefined manner if a huge page is mapped to a memory range that MTRRs have mapped with multiple different memory types. Therefore, the mapping code falls back to use a smaller page size toward 4KB when a mapping range is covered by non-WB type of MTRRs. The WB type of MTRRs has no affect on the PAT memory types. pud_set_huge() and pmd_set_huge() call mtrr_type_lookup() to see if a given range is covered by MTRRs. MTRR_TYPE_WRBACK indicates that the range is either covered by WB or not covered and the MTRR default value is set to WB. 0xFF indicates that MTRRs are disabled. HAVE_ARCH_HUGE_VMAP is selected when X86_64 or X86_32 with X86_PAE is set. X86_32 without X86_PAE is not supported since such config can unlikey be benefited from this feature, and there was an issue found in testing. [fengguang.wu@intel.com: ioremap_pud_capable can be static] Signed-off-by: Toshi Kani <toshi.kani@hp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Robert Elliott <Elliott@hp.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 05:47:32 +07:00
#include <asm/mtrr.h>
#ifdef CONFIG_DYNAMIC_PHYSICAL_MASK
phys_addr_t physical_mask __ro_after_init = (1ULL << __PHYSICAL_MASK_SHIFT) - 1;
EXPORT_SYMBOL(physical_mask);
#endif
x86, mm: Allow highmem user page tables to be disabled at boot time Distros generally (I looked at Debian, RHEL5 and SLES11) seem to enable CONFIG_HIGHPTE for any x86 configuration which has highmem enabled. This means that the overhead applies even to machines which have a fairly modest amount of high memory and which therefore do not really benefit from allocating PTEs in high memory but still pay the price of the additional mapping operations. Running kernbench on a 4G box I found that with CONFIG_HIGHPTE=y but no actual highptes being allocated there was a reduction in system time used from 59.737s to 55.9s. With CONFIG_HIGHPTE=y and highmem PTEs being allocated: Average Optimal load -j 4 Run (std deviation): Elapsed Time 175.396 (0.238914) User Time 515.983 (5.85019) System Time 59.737 (1.26727) Percent CPU 263.8 (71.6796) Context Switches 39989.7 (4672.64) Sleeps 42617.7 (246.307) With CONFIG_HIGHPTE=y but with no highmem PTEs being allocated: Average Optimal load -j 4 Run (std deviation): Elapsed Time 174.278 (0.831968) User Time 515.659 (6.07012) System Time 55.9 (1.07799) Percent CPU 263.8 (71.266) Context Switches 39929.6 (4485.13) Sleeps 42583.7 (373.039) This patch allows the user to control the allocation of PTEs in highmem from the command line ("userpte=nohigh") but retains the status-quo as the default. It is possible that some simple heuristic could be developed which allows auto-tuning of this option however I don't have a sufficiently large machine available to me to perform any particularly meaningful experiments. We could probably handwave up an argument for a threshold at 16G of total RAM. Assuming 768M of lowmem we have 196608 potential lowmem PTE pages. Each page can map 2M of RAM in a PAE-enabled configuration, meaning a maximum of 384G of RAM could potentially be mapped using lowmem PTEs. Even allowing generous factor of 10 to account for other required lowmem allocations, generous slop to account for page sharing (which reduces the total amount of RAM mappable by a given number of PT pages) and other innacuracies in the estimations it would seem that even a 32G machine would not have a particularly pressing need for highmem PTEs. I think 32G could be considered to be at the upper bound of what might be sensible on a 32 bit machine (although I think in practice 64G is still supported). It's seems questionable if HIGHPTE is even a win for any amount of RAM you would sensibly run a 32 bit kernel on rather than going 64 bit. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> LKML-Reference: <1266403090-20162-1-git-send-email-ian.campbell@citrix.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-17 17:38:10 +07:00
#ifdef CONFIG_HIGHPTE
asm-generic, x86: introduce generic pte_{alloc,free}_one[_kernel] Most architectures have identical or very similar implementation of pte_alloc_one_kernel(), pte_alloc_one(), pte_free_kernel() and pte_free(). Add a generic implementation that can be reused across architectures and enable its use on x86. The generic implementation uses GFP_KERNEL | __GFP_ZERO for the kernel page tables and GFP_KERNEL | __GFP_ZERO | __GFP_ACCOUNT for the user page tables. The "base" functions for PTE allocation, namely __pte_alloc_one_kernel() and __pte_alloc_one() are intended for the architectures that require additional actions after actual memory allocation or must use non-default GFP flags. x86 is switched to use generic pte_alloc_one_kernel(), pte_free_kernel() and pte_free(). x86 still implements pte_alloc_one() to allow run-time control of GFP flags required for "userpte" command line option. Link: http://lkml.kernel.org/r/1557296232-15361-2-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 10:57:49 +07:00
#define PGTABLE_HIGHMEM __GFP_HIGHMEM
x86, mm: Allow highmem user page tables to be disabled at boot time Distros generally (I looked at Debian, RHEL5 and SLES11) seem to enable CONFIG_HIGHPTE for any x86 configuration which has highmem enabled. This means that the overhead applies even to machines which have a fairly modest amount of high memory and which therefore do not really benefit from allocating PTEs in high memory but still pay the price of the additional mapping operations. Running kernbench on a 4G box I found that with CONFIG_HIGHPTE=y but no actual highptes being allocated there was a reduction in system time used from 59.737s to 55.9s. With CONFIG_HIGHPTE=y and highmem PTEs being allocated: Average Optimal load -j 4 Run (std deviation): Elapsed Time 175.396 (0.238914) User Time 515.983 (5.85019) System Time 59.737 (1.26727) Percent CPU 263.8 (71.6796) Context Switches 39989.7 (4672.64) Sleeps 42617.7 (246.307) With CONFIG_HIGHPTE=y but with no highmem PTEs being allocated: Average Optimal load -j 4 Run (std deviation): Elapsed Time 174.278 (0.831968) User Time 515.659 (6.07012) System Time 55.9 (1.07799) Percent CPU 263.8 (71.266) Context Switches 39929.6 (4485.13) Sleeps 42583.7 (373.039) This patch allows the user to control the allocation of PTEs in highmem from the command line ("userpte=nohigh") but retains the status-quo as the default. It is possible that some simple heuristic could be developed which allows auto-tuning of this option however I don't have a sufficiently large machine available to me to perform any particularly meaningful experiments. We could probably handwave up an argument for a threshold at 16G of total RAM. Assuming 768M of lowmem we have 196608 potential lowmem PTE pages. Each page can map 2M of RAM in a PAE-enabled configuration, meaning a maximum of 384G of RAM could potentially be mapped using lowmem PTEs. Even allowing generous factor of 10 to account for other required lowmem allocations, generous slop to account for page sharing (which reduces the total amount of RAM mappable by a given number of PT pages) and other innacuracies in the estimations it would seem that even a 32G machine would not have a particularly pressing need for highmem PTEs. I think 32G could be considered to be at the upper bound of what might be sensible on a 32 bit machine (although I think in practice 64G is still supported). It's seems questionable if HIGHPTE is even a win for any amount of RAM you would sensibly run a 32 bit kernel on rather than going 64 bit. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> LKML-Reference: <1266403090-20162-1-git-send-email-ian.campbell@citrix.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-17 17:38:10 +07:00
#else
asm-generic, x86: introduce generic pte_{alloc,free}_one[_kernel] Most architectures have identical or very similar implementation of pte_alloc_one_kernel(), pte_alloc_one(), pte_free_kernel() and pte_free(). Add a generic implementation that can be reused across architectures and enable its use on x86. The generic implementation uses GFP_KERNEL | __GFP_ZERO for the kernel page tables and GFP_KERNEL | __GFP_ZERO | __GFP_ACCOUNT for the user page tables. The "base" functions for PTE allocation, namely __pte_alloc_one_kernel() and __pte_alloc_one() are intended for the architectures that require additional actions after actual memory allocation or must use non-default GFP flags. x86 is switched to use generic pte_alloc_one_kernel(), pte_free_kernel() and pte_free(). x86 still implements pte_alloc_one() to allow run-time control of GFP flags required for "userpte" command line option. Link: http://lkml.kernel.org/r/1557296232-15361-2-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 10:57:49 +07:00
#define PGTABLE_HIGHMEM 0
x86, mm: Allow highmem user page tables to be disabled at boot time Distros generally (I looked at Debian, RHEL5 and SLES11) seem to enable CONFIG_HIGHPTE for any x86 configuration which has highmem enabled. This means that the overhead applies even to machines which have a fairly modest amount of high memory and which therefore do not really benefit from allocating PTEs in high memory but still pay the price of the additional mapping operations. Running kernbench on a 4G box I found that with CONFIG_HIGHPTE=y but no actual highptes being allocated there was a reduction in system time used from 59.737s to 55.9s. With CONFIG_HIGHPTE=y and highmem PTEs being allocated: Average Optimal load -j 4 Run (std deviation): Elapsed Time 175.396 (0.238914) User Time 515.983 (5.85019) System Time 59.737 (1.26727) Percent CPU 263.8 (71.6796) Context Switches 39989.7 (4672.64) Sleeps 42617.7 (246.307) With CONFIG_HIGHPTE=y but with no highmem PTEs being allocated: Average Optimal load -j 4 Run (std deviation): Elapsed Time 174.278 (0.831968) User Time 515.659 (6.07012) System Time 55.9 (1.07799) Percent CPU 263.8 (71.266) Context Switches 39929.6 (4485.13) Sleeps 42583.7 (373.039) This patch allows the user to control the allocation of PTEs in highmem from the command line ("userpte=nohigh") but retains the status-quo as the default. It is possible that some simple heuristic could be developed which allows auto-tuning of this option however I don't have a sufficiently large machine available to me to perform any particularly meaningful experiments. We could probably handwave up an argument for a threshold at 16G of total RAM. Assuming 768M of lowmem we have 196608 potential lowmem PTE pages. Each page can map 2M of RAM in a PAE-enabled configuration, meaning a maximum of 384G of RAM could potentially be mapped using lowmem PTEs. Even allowing generous factor of 10 to account for other required lowmem allocations, generous slop to account for page sharing (which reduces the total amount of RAM mappable by a given number of PT pages) and other innacuracies in the estimations it would seem that even a 32G machine would not have a particularly pressing need for highmem PTEs. I think 32G could be considered to be at the upper bound of what might be sensible on a 32 bit machine (although I think in practice 64G is still supported). It's seems questionable if HIGHPTE is even a win for any amount of RAM you would sensibly run a 32 bit kernel on rather than going 64 bit. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> LKML-Reference: <1266403090-20162-1-git-send-email-ian.campbell@citrix.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-17 17:38:10 +07:00
#endif
#ifndef CONFIG_PARAVIRT
static inline
void paravirt_tlb_remove_table(struct mmu_gather *tlb, void *table)
{
tlb_remove_page(tlb, table);
}
#endif
asm-generic, x86: introduce generic pte_{alloc,free}_one[_kernel] Most architectures have identical or very similar implementation of pte_alloc_one_kernel(), pte_alloc_one(), pte_free_kernel() and pte_free(). Add a generic implementation that can be reused across architectures and enable its use on x86. The generic implementation uses GFP_KERNEL | __GFP_ZERO for the kernel page tables and GFP_KERNEL | __GFP_ZERO | __GFP_ACCOUNT for the user page tables. The "base" functions for PTE allocation, namely __pte_alloc_one_kernel() and __pte_alloc_one() are intended for the architectures that require additional actions after actual memory allocation or must use non-default GFP flags. x86 is switched to use generic pte_alloc_one_kernel(), pte_free_kernel() and pte_free(). x86 still implements pte_alloc_one() to allow run-time control of GFP flags required for "userpte" command line option. Link: http://lkml.kernel.org/r/1557296232-15361-2-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 10:57:49 +07:00
gfp_t __userpte_alloc_gfp = GFP_PGTABLE_USER | PGTABLE_HIGHMEM;
mm: treewide: remove unused address argument from pte_alloc functions Patch series "Add support for fast mremap". This series speeds up the mremap(2) syscall by copying page tables at the PMD level even for non-THP systems. There is concern that the extra 'address' argument that mremap passes to pte_alloc may do something subtle architecture related in the future that may make the scheme not work. Also we find that there is no point in passing the 'address' to pte_alloc since its unused. This patch therefore removes this argument tree-wide resulting in a nice negative diff as well. Also ensuring along the way that the enabled architectures do not do anything funky with the 'address' argument that goes unnoticed by the optimization. Build and boot tested on x86-64. Build tested on arm64. The config enablement patch for arm64 will be posted in the future after more testing. The changes were obtained by applying the following Coccinelle script. (thanks Julia for answering all Coccinelle questions!). Following fix ups were done manually: * Removal of address argument from pte_fragment_alloc * Removal of pte_alloc_one_fast definitions from m68k and microblaze. // Options: --include-headers --no-includes // Note: I split the 'identifier fn' line, so if you are manually // running it, please unsplit it so it runs for you. virtual patch @pte_alloc_func_def depends on patch exists@ identifier E2; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; type T2; @@ fn(... - , T2 E2 ) { ... } @pte_alloc_func_proto_noarg depends on patch exists@ type T1, T2, T3, T4; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ ( - T3 fn(T1, T2); + T3 fn(T1); | - T3 fn(T1, T2, T4); + T3 fn(T1, T2); ) @pte_alloc_func_proto depends on patch exists@ identifier E1, E2, E4; type T1, T2, T3, T4; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ ( - T3 fn(T1 E1, T2 E2); + T3 fn(T1 E1); | - T3 fn(T1 E1, T2 E2, T4 E4); + T3 fn(T1 E1, T2 E2); ) @pte_alloc_func_call depends on patch exists@ expression E2; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ fn(... -, E2 ) @pte_alloc_macro depends on patch exists@ identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; identifier a, b, c; expression e; position p; @@ ( - #define fn(a, b, c) e + #define fn(a, b) e | - #define fn(a, b) e + #define fn(a) e ) Link: http://lkml.kernel.org/r/20181108181201.88826-2-joelaf@google.com Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Suggested-by: Kirill A. Shutemov <kirill@shutemov.name> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michal Hocko <mhocko@kernel.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 06:28:34 +07:00
pgtable_t pte_alloc_one(struct mm_struct *mm)
{
asm-generic, x86: introduce generic pte_{alloc,free}_one[_kernel] Most architectures have identical or very similar implementation of pte_alloc_one_kernel(), pte_alloc_one(), pte_free_kernel() and pte_free(). Add a generic implementation that can be reused across architectures and enable its use on x86. The generic implementation uses GFP_KERNEL | __GFP_ZERO for the kernel page tables and GFP_KERNEL | __GFP_ZERO | __GFP_ACCOUNT for the user page tables. The "base" functions for PTE allocation, namely __pte_alloc_one_kernel() and __pte_alloc_one() are intended for the architectures that require additional actions after actual memory allocation or must use non-default GFP flags. x86 is switched to use generic pte_alloc_one_kernel(), pte_free_kernel() and pte_free(). x86 still implements pte_alloc_one() to allow run-time control of GFP flags required for "userpte" command line option. Link: http://lkml.kernel.org/r/1557296232-15361-2-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 10:57:49 +07:00
return __pte_alloc_one(mm, __userpte_alloc_gfp);
}
x86, mm: Allow highmem user page tables to be disabled at boot time Distros generally (I looked at Debian, RHEL5 and SLES11) seem to enable CONFIG_HIGHPTE for any x86 configuration which has highmem enabled. This means that the overhead applies even to machines which have a fairly modest amount of high memory and which therefore do not really benefit from allocating PTEs in high memory but still pay the price of the additional mapping operations. Running kernbench on a 4G box I found that with CONFIG_HIGHPTE=y but no actual highptes being allocated there was a reduction in system time used from 59.737s to 55.9s. With CONFIG_HIGHPTE=y and highmem PTEs being allocated: Average Optimal load -j 4 Run (std deviation): Elapsed Time 175.396 (0.238914) User Time 515.983 (5.85019) System Time 59.737 (1.26727) Percent CPU 263.8 (71.6796) Context Switches 39989.7 (4672.64) Sleeps 42617.7 (246.307) With CONFIG_HIGHPTE=y but with no highmem PTEs being allocated: Average Optimal load -j 4 Run (std deviation): Elapsed Time 174.278 (0.831968) User Time 515.659 (6.07012) System Time 55.9 (1.07799) Percent CPU 263.8 (71.266) Context Switches 39929.6 (4485.13) Sleeps 42583.7 (373.039) This patch allows the user to control the allocation of PTEs in highmem from the command line ("userpte=nohigh") but retains the status-quo as the default. It is possible that some simple heuristic could be developed which allows auto-tuning of this option however I don't have a sufficiently large machine available to me to perform any particularly meaningful experiments. We could probably handwave up an argument for a threshold at 16G of total RAM. Assuming 768M of lowmem we have 196608 potential lowmem PTE pages. Each page can map 2M of RAM in a PAE-enabled configuration, meaning a maximum of 384G of RAM could potentially be mapped using lowmem PTEs. Even allowing generous factor of 10 to account for other required lowmem allocations, generous slop to account for page sharing (which reduces the total amount of RAM mappable by a given number of PT pages) and other innacuracies in the estimations it would seem that even a 32G machine would not have a particularly pressing need for highmem PTEs. I think 32G could be considered to be at the upper bound of what might be sensible on a 32 bit machine (although I think in practice 64G is still supported). It's seems questionable if HIGHPTE is even a win for any amount of RAM you would sensibly run a 32 bit kernel on rather than going 64 bit. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> LKML-Reference: <1266403090-20162-1-git-send-email-ian.campbell@citrix.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-17 17:38:10 +07:00
static int __init setup_userpte(char *arg)
{
if (!arg)
return -EINVAL;
/*
* "userpte=nohigh" disables allocation of user pagetables in
* high memory.
*/
if (strcmp(arg, "nohigh") == 0)
__userpte_alloc_gfp &= ~__GFP_HIGHMEM;
else
return -EINVAL;
return 0;
}
early_param("userpte", setup_userpte);
void ___pte_free_tlb(struct mmu_gather *tlb, struct page *pte)
{
pgtable_pte_page_dtor(pte);
paravirt_release_pte(page_to_pfn(pte));
paravirt_tlb_remove_table(tlb, pte);
}
#if CONFIG_PGTABLE_LEVELS > 2
void ___pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
{
struct page *page = virt_to_page(pmd);
paravirt_release_pmd(__pa(pmd) >> PAGE_SHIFT);
2013-04-13 06:23:54 +07:00
/*
* NOTE! For PAE, any changes to the top page-directory-pointer-table
* entries need a full cr3 reload to flush.
*/
#ifdef CONFIG_X86_PAE
tlb->need_flush_all = 1;
#endif
pgtable_pmd_page_dtor(page);
paravirt_tlb_remove_table(tlb, page);
}
#if CONFIG_PGTABLE_LEVELS > 3
void ___pud_free_tlb(struct mmu_gather *tlb, pud_t *pud)
{
paravirt_release_pud(__pa(pud) >> PAGE_SHIFT);
paravirt_tlb_remove_table(tlb, virt_to_page(pud));
}
#if CONFIG_PGTABLE_LEVELS > 4
void ___p4d_free_tlb(struct mmu_gather *tlb, p4d_t *p4d)
{
paravirt_release_p4d(__pa(p4d) >> PAGE_SHIFT);
paravirt_tlb_remove_table(tlb, virt_to_page(p4d));
}
#endif /* CONFIG_PGTABLE_LEVELS > 4 */
#endif /* CONFIG_PGTABLE_LEVELS > 3 */
#endif /* CONFIG_PGTABLE_LEVELS > 2 */
static inline void pgd_list_add(pgd_t *pgd)
{
struct page *page = virt_to_page(pgd);
list_add(&page->lru, &pgd_list);
}
static inline void pgd_list_del(pgd_t *pgd)
{
struct page *page = virt_to_page(pgd);
list_del(&page->lru);
}
#define UNSHARED_PTRS_PER_PGD \
(SHARED_KERNEL_PMD ? KERNEL_PGD_BOUNDARY : PTRS_PER_PGD)
x86/mm: Avoid VLA in pgd_alloc() Arnd Bergmann reported that turning on -Wvla found a new (unintended) VLA usage: arch/x86/mm/pgtable.c: In function 'pgd_alloc': include/linux/build_bug.h:29:45: error: ISO C90 forbids variable length array 'u_pmds' [-Werror=vla] arch/x86/mm/pgtable.c:190:34: note: in expansion of macro 'static_cpu_has' #define PREALLOCATED_USER_PMDS (static_cpu_has(X86_FEATURE_PTI) ? \ ^~~~~~~~~~~~~~ arch/x86/mm/pgtable.c:431:16: note: in expansion of macro 'PREALLOCATED_USER_PMDS' pmd_t *u_pmds[PREALLOCATED_USER_PMDS]; ^~~~~~~~~~~~~~~~~~~~~~ Use the actual size of the array that is used for X86_FEATURE_PTI, which is known at build time, instead of the variable size. [ mingo: Squashed original fix with followup fix to avoid bisection breakage, wrote new changelog. ] Reported-by: Arnd Bergmann <arnd@arndb.de> Original-written-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hpe.com> Fixes: 1be3f247c288 ("x86/mm: Avoid VLA in pgd_alloc()") Link: http://lkml.kernel.org/r/20181008235434.GA35035@beast Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-09 06:54:34 +07:00
#define MAX_UNSHARED_PTRS_PER_PGD \
max_t(size_t, KERNEL_PGD_BOUNDARY, PTRS_PER_PGD)
static void pgd_set_mm(pgd_t *pgd, struct mm_struct *mm)
{
virt_to_page(pgd)->pt_mm = mm;
}
struct mm_struct *pgd_page_get_mm(struct page *page)
{
return page->pt_mm;
}
static void pgd_ctor(struct mm_struct *mm, pgd_t *pgd)
{
/* If the pgd points to a shared pagetable level (either the
ptes in non-PAE, or shared PMD in PAE), then just copy the
references from swapper_pg_dir. */
if (CONFIG_PGTABLE_LEVELS == 2 ||
(CONFIG_PGTABLE_LEVELS == 3 && SHARED_KERNEL_PMD) ||
CONFIG_PGTABLE_LEVELS >= 4) {
clone_pgd_range(pgd + KERNEL_PGD_BOUNDARY,
swapper_pg_dir + KERNEL_PGD_BOUNDARY,
KERNEL_PGD_PTRS);
}
/* list required to sync kernel mapping updates */
if (!SHARED_KERNEL_PMD) {
pgd_set_mm(pgd, mm);
pgd_list_add(pgd);
}
}
static void pgd_dtor(pgd_t *pgd)
{
if (SHARED_KERNEL_PMD)
return;
spin_lock(&pgd_lock);
pgd_list_del(pgd);
spin_unlock(&pgd_lock);
}
/*
* List of all pgd's needed for non-PAE so it can invalidate entries
* in both cached and uncached pgd's; not needed for PAE since the
* kernel pmd is shared. If PAE were not to share the pmd a similar
* tactic would be needed. This is essentially codepath-based locking
* against pageattr.c; it is the unique case in which a valid change
* of kernel pagetables can't be lazily synchronized by vmalloc faults.
* vmalloc faults work because attached pagetables are never freed.
* -- nyc
*/
#ifdef CONFIG_X86_PAE
/*
* In PAE mode, we need to do a cr3 reload (=tlb flush) when
* updating the top-level pagetable entries to guarantee the
* processor notices the update. Since this is expensive, and
* all 4 top-level entries are used almost immediately in a
* new process's life, we just pre-populate them here.
*
* Also, if we're in a paravirt environment where the kernel pmd is
* not shared between pagetables (!SHARED_KERNEL_PMDS), we allocate
* and initialize the kernel pmds here.
*/
#define PREALLOCATED_PMDS UNSHARED_PTRS_PER_PGD
x86/mm: Avoid VLA in pgd_alloc() Arnd Bergmann reported that turning on -Wvla found a new (unintended) VLA usage: arch/x86/mm/pgtable.c: In function 'pgd_alloc': include/linux/build_bug.h:29:45: error: ISO C90 forbids variable length array 'u_pmds' [-Werror=vla] arch/x86/mm/pgtable.c:190:34: note: in expansion of macro 'static_cpu_has' #define PREALLOCATED_USER_PMDS (static_cpu_has(X86_FEATURE_PTI) ? \ ^~~~~~~~~~~~~~ arch/x86/mm/pgtable.c:431:16: note: in expansion of macro 'PREALLOCATED_USER_PMDS' pmd_t *u_pmds[PREALLOCATED_USER_PMDS]; ^~~~~~~~~~~~~~~~~~~~~~ Use the actual size of the array that is used for X86_FEATURE_PTI, which is known at build time, instead of the variable size. [ mingo: Squashed original fix with followup fix to avoid bisection breakage, wrote new changelog. ] Reported-by: Arnd Bergmann <arnd@arndb.de> Original-written-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hpe.com> Fixes: 1be3f247c288 ("x86/mm: Avoid VLA in pgd_alloc()") Link: http://lkml.kernel.org/r/20181008235434.GA35035@beast Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-09 06:54:34 +07:00
#define MAX_PREALLOCATED_PMDS MAX_UNSHARED_PTRS_PER_PGD
/*
* We allocate separate PMDs for the kernel part of the user page-table
* when PTI is enabled. We need them to map the per-process LDT into the
* user-space page-table.
*/
#define PREALLOCATED_USER_PMDS (boot_cpu_has(X86_FEATURE_PTI) ? \
KERNEL_PGD_PTRS : 0)
x86/mm: Avoid VLA in pgd_alloc() Arnd Bergmann reported that turning on -Wvla found a new (unintended) VLA usage: arch/x86/mm/pgtable.c: In function 'pgd_alloc': include/linux/build_bug.h:29:45: error: ISO C90 forbids variable length array 'u_pmds' [-Werror=vla] arch/x86/mm/pgtable.c:190:34: note: in expansion of macro 'static_cpu_has' #define PREALLOCATED_USER_PMDS (static_cpu_has(X86_FEATURE_PTI) ? \ ^~~~~~~~~~~~~~ arch/x86/mm/pgtable.c:431:16: note: in expansion of macro 'PREALLOCATED_USER_PMDS' pmd_t *u_pmds[PREALLOCATED_USER_PMDS]; ^~~~~~~~~~~~~~~~~~~~~~ Use the actual size of the array that is used for X86_FEATURE_PTI, which is known at build time, instead of the variable size. [ mingo: Squashed original fix with followup fix to avoid bisection breakage, wrote new changelog. ] Reported-by: Arnd Bergmann <arnd@arndb.de> Original-written-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hpe.com> Fixes: 1be3f247c288 ("x86/mm: Avoid VLA in pgd_alloc()") Link: http://lkml.kernel.org/r/20181008235434.GA35035@beast Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-09 06:54:34 +07:00
#define MAX_PREALLOCATED_USER_PMDS KERNEL_PGD_PTRS
void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmd)
{
paravirt_alloc_pmd(mm, __pa(pmd) >> PAGE_SHIFT);
/* Note: almost everything apart from _PAGE_PRESENT is
reserved at the pmd (PDPT) level. */
set_pud(pudp, __pud(__pa(pmd) | _PAGE_PRESENT));
/*
* According to Intel App note "TLBs, Paging-Structure Caches,
* and Their Invalidation", April 2007, document 317080-001,
* section 8.1: in PAE mode we explicitly have to flush the
* TLB via cr3 if the top-level pgd is changed...
*/
flush_tlb_mm(mm);
}
#else /* !CONFIG_X86_PAE */
/* No need to prepopulate any pagetable entries in non-PAE modes. */
#define PREALLOCATED_PMDS 0
x86/mm: Avoid VLA in pgd_alloc() Arnd Bergmann reported that turning on -Wvla found a new (unintended) VLA usage: arch/x86/mm/pgtable.c: In function 'pgd_alloc': include/linux/build_bug.h:29:45: error: ISO C90 forbids variable length array 'u_pmds' [-Werror=vla] arch/x86/mm/pgtable.c:190:34: note: in expansion of macro 'static_cpu_has' #define PREALLOCATED_USER_PMDS (static_cpu_has(X86_FEATURE_PTI) ? \ ^~~~~~~~~~~~~~ arch/x86/mm/pgtable.c:431:16: note: in expansion of macro 'PREALLOCATED_USER_PMDS' pmd_t *u_pmds[PREALLOCATED_USER_PMDS]; ^~~~~~~~~~~~~~~~~~~~~~ Use the actual size of the array that is used for X86_FEATURE_PTI, which is known at build time, instead of the variable size. [ mingo: Squashed original fix with followup fix to avoid bisection breakage, wrote new changelog. ] Reported-by: Arnd Bergmann <arnd@arndb.de> Original-written-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hpe.com> Fixes: 1be3f247c288 ("x86/mm: Avoid VLA in pgd_alloc()") Link: http://lkml.kernel.org/r/20181008235434.GA35035@beast Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-09 06:54:34 +07:00
#define MAX_PREALLOCATED_PMDS 0
#define PREALLOCATED_USER_PMDS 0
x86/mm: Avoid VLA in pgd_alloc() Arnd Bergmann reported that turning on -Wvla found a new (unintended) VLA usage: arch/x86/mm/pgtable.c: In function 'pgd_alloc': include/linux/build_bug.h:29:45: error: ISO C90 forbids variable length array 'u_pmds' [-Werror=vla] arch/x86/mm/pgtable.c:190:34: note: in expansion of macro 'static_cpu_has' #define PREALLOCATED_USER_PMDS (static_cpu_has(X86_FEATURE_PTI) ? \ ^~~~~~~~~~~~~~ arch/x86/mm/pgtable.c:431:16: note: in expansion of macro 'PREALLOCATED_USER_PMDS' pmd_t *u_pmds[PREALLOCATED_USER_PMDS]; ^~~~~~~~~~~~~~~~~~~~~~ Use the actual size of the array that is used for X86_FEATURE_PTI, which is known at build time, instead of the variable size. [ mingo: Squashed original fix with followup fix to avoid bisection breakage, wrote new changelog. ] Reported-by: Arnd Bergmann <arnd@arndb.de> Original-written-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hpe.com> Fixes: 1be3f247c288 ("x86/mm: Avoid VLA in pgd_alloc()") Link: http://lkml.kernel.org/r/20181008235434.GA35035@beast Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-09 06:54:34 +07:00
#define MAX_PREALLOCATED_USER_PMDS 0
#endif /* CONFIG_X86_PAE */
static void free_pmds(struct mm_struct *mm, pmd_t *pmds[], int count)
{
int i;
for (i = 0; i < count; i++)
x86: add missed pgtable_pmd_page_ctor/dtor calls for preallocated pmds In split page table lock case, we embed spinlock_t into struct page. For obvious reason, we don't want to increase size of struct page if spinlock_t is too big, like with DEBUG_SPINLOCK or DEBUG_LOCK_ALLOC or on -rt kernel. So we disable split page table lock, if spinlock_t is too big. This patchset allows to allocate the lock dynamically if spinlock_t is big. In this page->ptl is used to store pointer to spinlock instead of spinlock itself. It costs additional cache line for indirect access, but fix page fault scalability for multi-threaded applications. LOCK_STAT depends on DEBUG_SPINLOCK, so on current kernel enabling LOCK_STAT to analyse scalability issues breaks scalability. ;) The patchset mostly fixes this. Results for ./thp_memscale -c 80 -b 512M on 4-socket machine: baseline, no CONFIG_LOCK_STAT: 9.115460703 seconds time elapsed baseline, CONFIG_LOCK_STAT=y: 53.890567123 seconds time elapsed patched, no CONFIG_LOCK_STAT: 8.852250368 seconds time elapsed patched, CONFIG_LOCK_STAT=y: 11.069770759 seconds time elapsed Patch count is scary, but most of them trivial. Overview: Patches 1-4 Few bug fixes. No dependencies to other patches. Probably should applied as soon as possible. Patch 5 Changes signature of pgtable_page_ctor(). We will use it for dynamic lock allocation, so it can fail. Patches 6-8 Add missing constructor/destructor calls on few archs. It's fixes NR_PAGETABLE accounting and prepare to use split ptl. Patches 9-33 Add pgtable_page_ctor() fail handling to all archs. Patches 34 Finally adds support of dynamically-allocated page->pte. Also contains documentation for split page table lock. This patch (of 34): I've missed that we preallocate few pmds on pgd_alloc() if X86_PAE enabled. Let's add missed constructor/destructor calls. I haven't noticed it during testing since prep_new_page() clears page->mapping and therefore page->ptl. It's effectively equal to spin_lock_init(&page->ptl). Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Chris Zankel <chris@zankel.net> Cc: Christoph Lameter <cl@linux.com> Cc: David Howells <dhowells@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Mikael Starvik <starvik@axis.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15 05:31:13 +07:00
if (pmds[i]) {
pgtable_pmd_page_dtor(virt_to_page(pmds[i]));
free_page((unsigned long)pmds[i]);
mm: account pmd page tables to the process Dave noticed that unprivileged process can allocate significant amount of memory -- >500 MiB on x86_64 -- and stay unnoticed by oom-killer and memory cgroup. The trick is to allocate a lot of PMD page tables. Linux kernel doesn't account PMD tables to the process, only PTE. The use-cases below use few tricks to allocate a lot of PMD page tables while keeping VmRSS and VmPTE low. oom_score for the process will be 0. #include <errno.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <sys/mman.h> #include <sys/prctl.h> #define PUD_SIZE (1UL << 30) #define PMD_SIZE (1UL << 21) #define NR_PUD 130000 int main(void) { char *addr = NULL; unsigned long i; prctl(PR_SET_THP_DISABLE); for (i = 0; i < NR_PUD ; i++) { addr = mmap(addr + PUD_SIZE, PUD_SIZE, PROT_WRITE|PROT_READ, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0); if (addr == MAP_FAILED) { perror("mmap"); break; } *addr = 'x'; munmap(addr, PMD_SIZE); mmap(addr, PMD_SIZE, PROT_WRITE|PROT_READ, MAP_ANONYMOUS|MAP_PRIVATE|MAP_FIXED, -1, 0); if (addr == MAP_FAILED) perror("re-mmap"), exit(1); } printf("PID %d consumed %lu KiB in PMD page tables\n", getpid(), i * 4096 >> 10); return pause(); } The patch addresses the issue by account PMD tables to the process the same way we account PTE. The main place where PMD tables is accounted is __pmd_alloc() and free_pmd_range(). But there're few corner cases: - HugeTLB can share PMD page tables. The patch handles by accounting the table to all processes who share it. - x86 PAE pre-allocates few PMD tables on fork. - Architectures with FIRST_USER_ADDRESS > 0. We need to adjust sanity check on exit(2). Accounting only happens on configuration where PMD page table's level is present (PMD is not folded). As with nr_ptes we use per-mm counter. The counter value is used to calculate baseline for badness score by oom-killer. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: David Rientjes <rientjes@google.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:50 +07:00
mm_dec_nr_pmds(mm);
x86: add missed pgtable_pmd_page_ctor/dtor calls for preallocated pmds In split page table lock case, we embed spinlock_t into struct page. For obvious reason, we don't want to increase size of struct page if spinlock_t is too big, like with DEBUG_SPINLOCK or DEBUG_LOCK_ALLOC or on -rt kernel. So we disable split page table lock, if spinlock_t is too big. This patchset allows to allocate the lock dynamically if spinlock_t is big. In this page->ptl is used to store pointer to spinlock instead of spinlock itself. It costs additional cache line for indirect access, but fix page fault scalability for multi-threaded applications. LOCK_STAT depends on DEBUG_SPINLOCK, so on current kernel enabling LOCK_STAT to analyse scalability issues breaks scalability. ;) The patchset mostly fixes this. Results for ./thp_memscale -c 80 -b 512M on 4-socket machine: baseline, no CONFIG_LOCK_STAT: 9.115460703 seconds time elapsed baseline, CONFIG_LOCK_STAT=y: 53.890567123 seconds time elapsed patched, no CONFIG_LOCK_STAT: 8.852250368 seconds time elapsed patched, CONFIG_LOCK_STAT=y: 11.069770759 seconds time elapsed Patch count is scary, but most of them trivial. Overview: Patches 1-4 Few bug fixes. No dependencies to other patches. Probably should applied as soon as possible. Patch 5 Changes signature of pgtable_page_ctor(). We will use it for dynamic lock allocation, so it can fail. Patches 6-8 Add missing constructor/destructor calls on few archs. It's fixes NR_PAGETABLE accounting and prepare to use split ptl. Patches 9-33 Add pgtable_page_ctor() fail handling to all archs. Patches 34 Finally adds support of dynamically-allocated page->pte. Also contains documentation for split page table lock. This patch (of 34): I've missed that we preallocate few pmds on pgd_alloc() if X86_PAE enabled. Let's add missed constructor/destructor calls. I haven't noticed it during testing since prep_new_page() clears page->mapping and therefore page->ptl. It's effectively equal to spin_lock_init(&page->ptl). Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Chris Zankel <chris@zankel.net> Cc: Christoph Lameter <cl@linux.com> Cc: David Howells <dhowells@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Mikael Starvik <starvik@axis.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15 05:31:13 +07:00
}
}
static int preallocate_pmds(struct mm_struct *mm, pmd_t *pmds[], int count)
{
int i;
bool failed = false;
asm-generic, x86: introduce generic pte_{alloc,free}_one[_kernel] Most architectures have identical or very similar implementation of pte_alloc_one_kernel(), pte_alloc_one(), pte_free_kernel() and pte_free(). Add a generic implementation that can be reused across architectures and enable its use on x86. The generic implementation uses GFP_KERNEL | __GFP_ZERO for the kernel page tables and GFP_KERNEL | __GFP_ZERO | __GFP_ACCOUNT for the user page tables. The "base" functions for PTE allocation, namely __pte_alloc_one_kernel() and __pte_alloc_one() are intended for the architectures that require additional actions after actual memory allocation or must use non-default GFP flags. x86 is switched to use generic pte_alloc_one_kernel(), pte_free_kernel() and pte_free(). x86 still implements pte_alloc_one() to allow run-time control of GFP flags required for "userpte" command line option. Link: http://lkml.kernel.org/r/1557296232-15361-2-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 10:57:49 +07:00
gfp_t gfp = GFP_PGTABLE_USER;
if (mm == &init_mm)
gfp &= ~__GFP_ACCOUNT;
for (i = 0; i < count; i++) {
pmd_t *pmd = (pmd_t *)__get_free_page(gfp);
x86: add missed pgtable_pmd_page_ctor/dtor calls for preallocated pmds In split page table lock case, we embed spinlock_t into struct page. For obvious reason, we don't want to increase size of struct page if spinlock_t is too big, like with DEBUG_SPINLOCK or DEBUG_LOCK_ALLOC or on -rt kernel. So we disable split page table lock, if spinlock_t is too big. This patchset allows to allocate the lock dynamically if spinlock_t is big. In this page->ptl is used to store pointer to spinlock instead of spinlock itself. It costs additional cache line for indirect access, but fix page fault scalability for multi-threaded applications. LOCK_STAT depends on DEBUG_SPINLOCK, so on current kernel enabling LOCK_STAT to analyse scalability issues breaks scalability. ;) The patchset mostly fixes this. Results for ./thp_memscale -c 80 -b 512M on 4-socket machine: baseline, no CONFIG_LOCK_STAT: 9.115460703 seconds time elapsed baseline, CONFIG_LOCK_STAT=y: 53.890567123 seconds time elapsed patched, no CONFIG_LOCK_STAT: 8.852250368 seconds time elapsed patched, CONFIG_LOCK_STAT=y: 11.069770759 seconds time elapsed Patch count is scary, but most of them trivial. Overview: Patches 1-4 Few bug fixes. No dependencies to other patches. Probably should applied as soon as possible. Patch 5 Changes signature of pgtable_page_ctor(). We will use it for dynamic lock allocation, so it can fail. Patches 6-8 Add missing constructor/destructor calls on few archs. It's fixes NR_PAGETABLE accounting and prepare to use split ptl. Patches 9-33 Add pgtable_page_ctor() fail handling to all archs. Patches 34 Finally adds support of dynamically-allocated page->pte. Also contains documentation for split page table lock. This patch (of 34): I've missed that we preallocate few pmds on pgd_alloc() if X86_PAE enabled. Let's add missed constructor/destructor calls. I haven't noticed it during testing since prep_new_page() clears page->mapping and therefore page->ptl. It's effectively equal to spin_lock_init(&page->ptl). Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Chris Zankel <chris@zankel.net> Cc: Christoph Lameter <cl@linux.com> Cc: David Howells <dhowells@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Mikael Starvik <starvik@axis.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15 05:31:13 +07:00
if (!pmd)
failed = true;
x86: add missed pgtable_pmd_page_ctor/dtor calls for preallocated pmds In split page table lock case, we embed spinlock_t into struct page. For obvious reason, we don't want to increase size of struct page if spinlock_t is too big, like with DEBUG_SPINLOCK or DEBUG_LOCK_ALLOC or on -rt kernel. So we disable split page table lock, if spinlock_t is too big. This patchset allows to allocate the lock dynamically if spinlock_t is big. In this page->ptl is used to store pointer to spinlock instead of spinlock itself. It costs additional cache line for indirect access, but fix page fault scalability for multi-threaded applications. LOCK_STAT depends on DEBUG_SPINLOCK, so on current kernel enabling LOCK_STAT to analyse scalability issues breaks scalability. ;) The patchset mostly fixes this. Results for ./thp_memscale -c 80 -b 512M on 4-socket machine: baseline, no CONFIG_LOCK_STAT: 9.115460703 seconds time elapsed baseline, CONFIG_LOCK_STAT=y: 53.890567123 seconds time elapsed patched, no CONFIG_LOCK_STAT: 8.852250368 seconds time elapsed patched, CONFIG_LOCK_STAT=y: 11.069770759 seconds time elapsed Patch count is scary, but most of them trivial. Overview: Patches 1-4 Few bug fixes. No dependencies to other patches. Probably should applied as soon as possible. Patch 5 Changes signature of pgtable_page_ctor(). We will use it for dynamic lock allocation, so it can fail. Patches 6-8 Add missing constructor/destructor calls on few archs. It's fixes NR_PAGETABLE accounting and prepare to use split ptl. Patches 9-33 Add pgtable_page_ctor() fail handling to all archs. Patches 34 Finally adds support of dynamically-allocated page->pte. Also contains documentation for split page table lock. This patch (of 34): I've missed that we preallocate few pmds on pgd_alloc() if X86_PAE enabled. Let's add missed constructor/destructor calls. I haven't noticed it during testing since prep_new_page() clears page->mapping and therefore page->ptl. It's effectively equal to spin_lock_init(&page->ptl). Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Chris Zankel <chris@zankel.net> Cc: Christoph Lameter <cl@linux.com> Cc: David Howells <dhowells@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Mikael Starvik <starvik@axis.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15 05:31:13 +07:00
if (pmd && !pgtable_pmd_page_ctor(virt_to_page(pmd))) {
free_page((unsigned long)pmd);
x86: add missed pgtable_pmd_page_ctor/dtor calls for preallocated pmds In split page table lock case, we embed spinlock_t into struct page. For obvious reason, we don't want to increase size of struct page if spinlock_t is too big, like with DEBUG_SPINLOCK or DEBUG_LOCK_ALLOC or on -rt kernel. So we disable split page table lock, if spinlock_t is too big. This patchset allows to allocate the lock dynamically if spinlock_t is big. In this page->ptl is used to store pointer to spinlock instead of spinlock itself. It costs additional cache line for indirect access, but fix page fault scalability for multi-threaded applications. LOCK_STAT depends on DEBUG_SPINLOCK, so on current kernel enabling LOCK_STAT to analyse scalability issues breaks scalability. ;) The patchset mostly fixes this. Results for ./thp_memscale -c 80 -b 512M on 4-socket machine: baseline, no CONFIG_LOCK_STAT: 9.115460703 seconds time elapsed baseline, CONFIG_LOCK_STAT=y: 53.890567123 seconds time elapsed patched, no CONFIG_LOCK_STAT: 8.852250368 seconds time elapsed patched, CONFIG_LOCK_STAT=y: 11.069770759 seconds time elapsed Patch count is scary, but most of them trivial. Overview: Patches 1-4 Few bug fixes. No dependencies to other patches. Probably should applied as soon as possible. Patch 5 Changes signature of pgtable_page_ctor(). We will use it for dynamic lock allocation, so it can fail. Patches 6-8 Add missing constructor/destructor calls on few archs. It's fixes NR_PAGETABLE accounting and prepare to use split ptl. Patches 9-33 Add pgtable_page_ctor() fail handling to all archs. Patches 34 Finally adds support of dynamically-allocated page->pte. Also contains documentation for split page table lock. This patch (of 34): I've missed that we preallocate few pmds on pgd_alloc() if X86_PAE enabled. Let's add missed constructor/destructor calls. I haven't noticed it during testing since prep_new_page() clears page->mapping and therefore page->ptl. It's effectively equal to spin_lock_init(&page->ptl). Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Chris Zankel <chris@zankel.net> Cc: Christoph Lameter <cl@linux.com> Cc: David Howells <dhowells@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Mikael Starvik <starvik@axis.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15 05:31:13 +07:00
pmd = NULL;
failed = true;
}
mm: account pmd page tables to the process Dave noticed that unprivileged process can allocate significant amount of memory -- >500 MiB on x86_64 -- and stay unnoticed by oom-killer and memory cgroup. The trick is to allocate a lot of PMD page tables. Linux kernel doesn't account PMD tables to the process, only PTE. The use-cases below use few tricks to allocate a lot of PMD page tables while keeping VmRSS and VmPTE low. oom_score for the process will be 0. #include <errno.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <sys/mman.h> #include <sys/prctl.h> #define PUD_SIZE (1UL << 30) #define PMD_SIZE (1UL << 21) #define NR_PUD 130000 int main(void) { char *addr = NULL; unsigned long i; prctl(PR_SET_THP_DISABLE); for (i = 0; i < NR_PUD ; i++) { addr = mmap(addr + PUD_SIZE, PUD_SIZE, PROT_WRITE|PROT_READ, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0); if (addr == MAP_FAILED) { perror("mmap"); break; } *addr = 'x'; munmap(addr, PMD_SIZE); mmap(addr, PMD_SIZE, PROT_WRITE|PROT_READ, MAP_ANONYMOUS|MAP_PRIVATE|MAP_FIXED, -1, 0); if (addr == MAP_FAILED) perror("re-mmap"), exit(1); } printf("PID %d consumed %lu KiB in PMD page tables\n", getpid(), i * 4096 >> 10); return pause(); } The patch addresses the issue by account PMD tables to the process the same way we account PTE. The main place where PMD tables is accounted is __pmd_alloc() and free_pmd_range(). But there're few corner cases: - HugeTLB can share PMD page tables. The patch handles by accounting the table to all processes who share it. - x86 PAE pre-allocates few PMD tables on fork. - Architectures with FIRST_USER_ADDRESS > 0. We need to adjust sanity check on exit(2). Accounting only happens on configuration where PMD page table's level is present (PMD is not folded). As with nr_ptes we use per-mm counter. The counter value is used to calculate baseline for badness score by oom-killer. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: David Rientjes <rientjes@google.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 06:26:50 +07:00
if (pmd)
mm_inc_nr_pmds(mm);
pmds[i] = pmd;
}
if (failed) {
free_pmds(mm, pmds, count);
return -ENOMEM;
}
return 0;
}
/*
* Mop up any pmd pages which may still be attached to the pgd.
* Normally they will be freed by munmap/exit_mmap, but any pmd we
* preallocate which never got a corresponding vma will need to be
* freed manually.
*/
static void mop_up_one_pmd(struct mm_struct *mm, pgd_t *pgdp)
{
pgd_t pgd = *pgdp;
if (pgd_val(pgd) != 0) {
pmd_t *pmd = (pmd_t *)pgd_page_vaddr(pgd);
pgd_clear(pgdp);
paravirt_release_pmd(pgd_val(pgd) >> PAGE_SHIFT);
pmd_free(mm, pmd);
mm_dec_nr_pmds(mm);
}
}
static void pgd_mop_up_pmds(struct mm_struct *mm, pgd_t *pgdp)
{
int i;
for (i = 0; i < PREALLOCATED_PMDS; i++)
mop_up_one_pmd(mm, &pgdp[i]);
#ifdef CONFIG_PAGE_TABLE_ISOLATION
if (!boot_cpu_has(X86_FEATURE_PTI))
return;
pgdp = kernel_to_user_pgdp(pgdp);
for (i = 0; i < PREALLOCATED_USER_PMDS; i++)
mop_up_one_pmd(mm, &pgdp[i + KERNEL_PGD_BOUNDARY]);
#endif
}
static void pgd_prepopulate_pmd(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmds[])
{
p4d_t *p4d;
pud_t *pud;
int i;
if (PREALLOCATED_PMDS == 0) /* Work around gcc-3.4.x bug */
return;
p4d = p4d_offset(pgd, 0);
pud = pud_offset(p4d, 0);
for (i = 0; i < PREALLOCATED_PMDS; i++, pud++) {
pmd_t *pmd = pmds[i];
if (i >= KERNEL_PGD_BOUNDARY)
memcpy(pmd, (pmd_t *)pgd_page_vaddr(swapper_pg_dir[i]),
sizeof(pmd_t) * PTRS_PER_PMD);
pud_populate(mm, pud, pmd);
}
}
#ifdef CONFIG_PAGE_TABLE_ISOLATION
static void pgd_prepopulate_user_pmd(struct mm_struct *mm,
pgd_t *k_pgd, pmd_t *pmds[])
{
pgd_t *s_pgd = kernel_to_user_pgdp(swapper_pg_dir);
pgd_t *u_pgd = kernel_to_user_pgdp(k_pgd);
p4d_t *u_p4d;
pud_t *u_pud;
int i;
u_p4d = p4d_offset(u_pgd, 0);
u_pud = pud_offset(u_p4d, 0);
s_pgd += KERNEL_PGD_BOUNDARY;
u_pud += KERNEL_PGD_BOUNDARY;
for (i = 0; i < PREALLOCATED_USER_PMDS; i++, u_pud++, s_pgd++) {
pmd_t *pmd = pmds[i];
memcpy(pmd, (pmd_t *)pgd_page_vaddr(*s_pgd),
sizeof(pmd_t) * PTRS_PER_PMD);
pud_populate(mm, u_pud, pmd);
}
}
#else
static void pgd_prepopulate_user_pmd(struct mm_struct *mm,
pgd_t *k_pgd, pmd_t *pmds[])
{
}
#endif
/*
* Xen paravirt assumes pgd table should be in one page. 64 bit kernel also
* assumes that pgd should be in one page.
*
* But kernel with PAE paging that is not running as a Xen domain
* only needs to allocate 32 bytes for pgd instead of one page.
*/
#ifdef CONFIG_X86_PAE
#include <linux/slab.h>
#define PGD_SIZE (PTRS_PER_PGD * sizeof(pgd_t))
#define PGD_ALIGN 32
static struct kmem_cache *pgd_cache;
void __init pgtable_cache_init(void)
{
/*
* When PAE kernel is running as a Xen domain, it does not use
* shared kernel pmd. And this requires a whole page for pgd.
*/
if (!SHARED_KERNEL_PMD)
return;
/*
* when PAE kernel is not running as a Xen domain, it uses
* shared kernel pmd. Shared kernel pmd does not require a whole
* page for pgd. We are able to just allocate a 32-byte for pgd.
* During boot time, we create a 32-byte slab for pgd table allocation.
*/
pgd_cache = kmem_cache_create("pgd_cache", PGD_SIZE, PGD_ALIGN,
SLAB_PANIC, NULL);
}
static inline pgd_t *_pgd_alloc(void)
{
/*
* If no SHARED_KERNEL_PMD, PAE kernel is running as a Xen domain.
* We allocate one page for pgd.
*/
if (!SHARED_KERNEL_PMD)
asm-generic, x86: introduce generic pte_{alloc,free}_one[_kernel] Most architectures have identical or very similar implementation of pte_alloc_one_kernel(), pte_alloc_one(), pte_free_kernel() and pte_free(). Add a generic implementation that can be reused across architectures and enable its use on x86. The generic implementation uses GFP_KERNEL | __GFP_ZERO for the kernel page tables and GFP_KERNEL | __GFP_ZERO | __GFP_ACCOUNT for the user page tables. The "base" functions for PTE allocation, namely __pte_alloc_one_kernel() and __pte_alloc_one() are intended for the architectures that require additional actions after actual memory allocation or must use non-default GFP flags. x86 is switched to use generic pte_alloc_one_kernel(), pte_free_kernel() and pte_free(). x86 still implements pte_alloc_one() to allow run-time control of GFP flags required for "userpte" command line option. Link: http://lkml.kernel.org/r/1557296232-15361-2-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 10:57:49 +07:00
return (pgd_t *)__get_free_pages(GFP_PGTABLE_USER,
PGD_ALLOCATION_ORDER);
/*
* Now PAE kernel is not running as a Xen domain. We can allocate
* a 32-byte slab for pgd to save memory space.
*/
asm-generic, x86: introduce generic pte_{alloc,free}_one[_kernel] Most architectures have identical or very similar implementation of pte_alloc_one_kernel(), pte_alloc_one(), pte_free_kernel() and pte_free(). Add a generic implementation that can be reused across architectures and enable its use on x86. The generic implementation uses GFP_KERNEL | __GFP_ZERO for the kernel page tables and GFP_KERNEL | __GFP_ZERO | __GFP_ACCOUNT for the user page tables. The "base" functions for PTE allocation, namely __pte_alloc_one_kernel() and __pte_alloc_one() are intended for the architectures that require additional actions after actual memory allocation or must use non-default GFP flags. x86 is switched to use generic pte_alloc_one_kernel(), pte_free_kernel() and pte_free(). x86 still implements pte_alloc_one() to allow run-time control of GFP flags required for "userpte" command line option. Link: http://lkml.kernel.org/r/1557296232-15361-2-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 10:57:49 +07:00
return kmem_cache_alloc(pgd_cache, GFP_PGTABLE_USER);
}
static inline void _pgd_free(pgd_t *pgd)
{
if (!SHARED_KERNEL_PMD)
free_pages((unsigned long)pgd, PGD_ALLOCATION_ORDER);
else
kmem_cache_free(pgd_cache, pgd);
}
#else
static inline pgd_t *_pgd_alloc(void)
{
asm-generic, x86: introduce generic pte_{alloc,free}_one[_kernel] Most architectures have identical or very similar implementation of pte_alloc_one_kernel(), pte_alloc_one(), pte_free_kernel() and pte_free(). Add a generic implementation that can be reused across architectures and enable its use on x86. The generic implementation uses GFP_KERNEL | __GFP_ZERO for the kernel page tables and GFP_KERNEL | __GFP_ZERO | __GFP_ACCOUNT for the user page tables. The "base" functions for PTE allocation, namely __pte_alloc_one_kernel() and __pte_alloc_one() are intended for the architectures that require additional actions after actual memory allocation or must use non-default GFP flags. x86 is switched to use generic pte_alloc_one_kernel(), pte_free_kernel() and pte_free(). x86 still implements pte_alloc_one() to allow run-time control of GFP flags required for "userpte" command line option. Link: http://lkml.kernel.org/r/1557296232-15361-2-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12 10:57:49 +07:00
return (pgd_t *)__get_free_pages(GFP_PGTABLE_USER,
PGD_ALLOCATION_ORDER);
}
static inline void _pgd_free(pgd_t *pgd)
{
free_pages((unsigned long)pgd, PGD_ALLOCATION_ORDER);
}
#endif /* CONFIG_X86_PAE */
pgd_t *pgd_alloc(struct mm_struct *mm)
{
pgd_t *pgd;
x86/mm: Avoid VLA in pgd_alloc() Arnd Bergmann reported that turning on -Wvla found a new (unintended) VLA usage: arch/x86/mm/pgtable.c: In function 'pgd_alloc': include/linux/build_bug.h:29:45: error: ISO C90 forbids variable length array 'u_pmds' [-Werror=vla] arch/x86/mm/pgtable.c:190:34: note: in expansion of macro 'static_cpu_has' #define PREALLOCATED_USER_PMDS (static_cpu_has(X86_FEATURE_PTI) ? \ ^~~~~~~~~~~~~~ arch/x86/mm/pgtable.c:431:16: note: in expansion of macro 'PREALLOCATED_USER_PMDS' pmd_t *u_pmds[PREALLOCATED_USER_PMDS]; ^~~~~~~~~~~~~~~~~~~~~~ Use the actual size of the array that is used for X86_FEATURE_PTI, which is known at build time, instead of the variable size. [ mingo: Squashed original fix with followup fix to avoid bisection breakage, wrote new changelog. ] Reported-by: Arnd Bergmann <arnd@arndb.de> Original-written-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hpe.com> Fixes: 1be3f247c288 ("x86/mm: Avoid VLA in pgd_alloc()") Link: http://lkml.kernel.org/r/20181008235434.GA35035@beast Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-09 06:54:34 +07:00
pmd_t *u_pmds[MAX_PREALLOCATED_USER_PMDS];
pmd_t *pmds[MAX_PREALLOCATED_PMDS];
pgd = _pgd_alloc();
if (pgd == NULL)
goto out;
mm->pgd = pgd;
if (preallocate_pmds(mm, pmds, PREALLOCATED_PMDS) != 0)
goto out_free_pgd;
if (preallocate_pmds(mm, u_pmds, PREALLOCATED_USER_PMDS) != 0)
goto out_free_pmds;
if (paravirt_pgd_alloc(mm) != 0)
goto out_free_user_pmds;
/*
* Make sure that pre-populating the pmds is atomic with
* respect to anything walking the pgd_list, so that they
* never see a partially populated pgd.
*/
spin_lock(&pgd_lock);
pgd_ctor(mm, pgd);
pgd_prepopulate_pmd(mm, pgd, pmds);
pgd_prepopulate_user_pmd(mm, pgd, u_pmds);
spin_unlock(&pgd_lock);
return pgd;
out_free_user_pmds:
free_pmds(mm, u_pmds, PREALLOCATED_USER_PMDS);
out_free_pmds:
free_pmds(mm, pmds, PREALLOCATED_PMDS);
out_free_pgd:
_pgd_free(pgd);
out:
return NULL;
}
void pgd_free(struct mm_struct *mm, pgd_t *pgd)
{
pgd_mop_up_pmds(mm, pgd);
pgd_dtor(pgd);
paravirt_pgd_free(mm, pgd);
_pgd_free(pgd);
}
/*
* Used to set accessed or dirty bits in the page table entries
* on other architectures. On x86, the accessed and dirty bits
* are tracked by hardware. However, do_wp_page calls this function
* to also make the pte writeable at the same time the dirty bit is
* set. In that case we do actually need to write the PTE.
*/
int ptep_set_access_flags(struct vm_area_struct *vma,
unsigned long address, pte_t *ptep,
pte_t entry, int dirty)
{
int changed = !pte_same(*ptep, entry);
if (changed && dirty)
set_pte(ptep, entry);
return changed;
}
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
int pmdp_set_access_flags(struct vm_area_struct *vma,
unsigned long address, pmd_t *pmdp,
pmd_t entry, int dirty)
{
int changed = !pmd_same(*pmdp, entry);
VM_BUG_ON(address & ~HPAGE_PMD_MASK);
if (changed && dirty) {
set_pmd(pmdp, entry);
/*
* We had a write-protection fault here and changed the pmd
* to to more permissive. No need to flush the TLB for that,
* #PF is architecturally guaranteed to do that and in the
* worst-case we'll generate a spurious fault.
*/
}
return changed;
}
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25 05:57:02 +07:00
int pudp_set_access_flags(struct vm_area_struct *vma, unsigned long address,
pud_t *pudp, pud_t entry, int dirty)
{
int changed = !pud_same(*pudp, entry);
VM_BUG_ON(address & ~HPAGE_PUD_MASK);
if (changed && dirty) {
set_pud(pudp, entry);
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25 05:57:02 +07:00
/*
* We had a write-protection fault here and changed the pud
* to to more permissive. No need to flush the TLB for that,
* #PF is architecturally guaranteed to do that and in the
* worst-case we'll generate a spurious fault.
*/
}
return changed;
}
#endif
int ptep_test_and_clear_young(struct vm_area_struct *vma,
unsigned long addr, pte_t *ptep)
{
int ret = 0;
if (pte_young(*ptep))
ret = test_and_clear_bit(_PAGE_BIT_ACCESSED,
(unsigned long *) &ptep->pte);
return ret;
}
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
int pmdp_test_and_clear_young(struct vm_area_struct *vma,
unsigned long addr, pmd_t *pmdp)
{
int ret = 0;
if (pmd_young(*pmdp))
ret = test_and_clear_bit(_PAGE_BIT_ACCESSED,
(unsigned long *)pmdp);
return ret;
}
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25 05:57:02 +07:00
int pudp_test_and_clear_young(struct vm_area_struct *vma,
unsigned long addr, pud_t *pudp)
{
int ret = 0;
if (pud_young(*pudp))
ret = test_and_clear_bit(_PAGE_BIT_ACCESSED,
(unsigned long *)pudp);
return ret;
}
#endif
int ptep_clear_flush_young(struct vm_area_struct *vma,
unsigned long address, pte_t *ptep)
{
x86/mm: In the PTE swapout page reclaim case clear the accessed bit instead of flushing the TLB We use the accessed bit to age a page at page reclaim time, and currently we also flush the TLB when doing so. But in some workloads TLB flush overhead is very heavy. In my simple multithreaded app with a lot of swap to several pcie SSDs, removing the tlb flush gives about 20% ~ 30% swapout speedup. Fortunately just removing the TLB flush is a valid optimization: on x86 CPUs, clearing the accessed bit without a TLB flush doesn't cause data corruption. It could cause incorrect page aging and the (mistaken) reclaim of hot pages, but the chance of that should be relatively low. So as a performance optimization don't flush the TLB when clearing the accessed bit, it will eventually be flushed by a context switch or a VM operation anyway. [ In the rare event of it not getting flushed for a long time the delay shouldn't really matter because there's no real memory pressure for swapout to react to. ] Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Shaohua Li <shli@fusionio.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: linux-mm@kvack.org Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20140408075809.GA1764@kernel.org [ Rewrote the changelog and the code comments. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-08 14:58:09 +07:00
/*
* On x86 CPUs, clearing the accessed bit without a TLB flush
* doesn't cause data corruption. [ It could cause incorrect
* page aging and the (mistaken) reclaim of hot pages, but the
* chance of that should be relatively low. ]
*
* So as a performance optimization don't flush the TLB when
* clearing the accessed bit, it will eventually be flushed by
* a context switch or a VM operation anyway. [ In the rare
* event of it not getting flushed for a long time the delay
* shouldn't really matter because there's no real memory
* pressure for swapout to react to. ]
*/
return ptep_test_and_clear_young(vma, address, ptep);
}
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
int pmdp_clear_flush_young(struct vm_area_struct *vma,
unsigned long address, pmd_t *pmdp)
{
int young;
VM_BUG_ON(address & ~HPAGE_PMD_MASK);
young = pmdp_test_and_clear_young(vma, address, pmdp);
if (young)
flush_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
return young;
}
#endif
/**
* reserve_top_address - reserves a hole in the top of kernel address space
* @reserve - size of hole to reserve
*
* Can be used to relocate the fixmap area and poke a hole in the top
* of kernel address space to make room for a hypervisor.
*/
void __init reserve_top_address(unsigned long reserve)
{
#ifdef CONFIG_X86_32
BUG_ON(fixmaps_set > 0);
__FIXADDR_TOP = round_down(-reserve, 1 << PMD_SHIFT) - PAGE_SIZE;
printk(KERN_INFO "Reserving virtual address space above 0x%08lx (rounded to 0x%08lx)\n",
-reserve, __FIXADDR_TOP + PAGE_SIZE);
#endif
}
int fixmaps_set;
void __native_set_fixmap(enum fixed_addresses idx, pte_t pte)
{
unsigned long address = __fix_to_virt(idx);
#ifdef CONFIG_X86_64
/*
* Ensure that the static initial page tables are covering the
* fixmap completely.
*/
BUILD_BUG_ON(__end_of_permanent_fixed_addresses >
(FIXMAP_PMD_NUM * PTRS_PER_PTE));
#endif
if (idx >= __end_of_fixed_addresses) {
BUG();
return;
}
set_pte_vaddr(address, pte);
fixmaps_set++;
}
void native_set_fixmap(unsigned /* enum fixed_addresses */ idx,
phys_addr_t phys, pgprot_t flags)
{
x86/mm: Do not auto-massage page protections A PTE is constructed from a physical address and a pgprotval_t. __PAGE_KERNEL, for instance, is a pgprot_t and must be converted into a pgprotval_t before it can be used to create a PTE. This is done implicitly within functions like pfn_pte() by massage_pgprot(). However, this makes it very challenging to set bits (and keep them set) if your bit is being filtered out by massage_pgprot(). This moves the bit filtering out of pfn_pte() and friends. For users of PAGE_KERNEL*, filtering will be done automatically inside those macros but for users of __PAGE_KERNEL*, they need to do their own filtering now. Note that we also just move pfn_pte/pmd/pud() over to check_pgprot() instead of massage_pgprot(). This way, we still *look* for unsupported bits and properly warn about them if we find them. This might happen if an unfiltered __PAGE_KERNEL* value was passed in, for instance. - printk format warning fix from: Arnd Bergmann <arnd@arndb.de> - boot crash fix from: Tom Lendacky <thomas.lendacky@amd.com> - crash bisected by: Mike Galbraith <efault@gmx.de> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reported-and-fixed-by: Arnd Bergmann <arnd@arndb.de> Fixed-by: Tom Lendacky <thomas.lendacky@amd.com> Bisected-by: Mike Galbraith <efault@gmx.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hugh Dickins <hughd@google.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nadav Amit <namit@vmware.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180406205509.77E1D7F6@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-07 03:55:09 +07:00
/* Sanitize 'prot' against any unsupported bits: */
pgprot_val(flags) &= __default_kernel_pte_mask;
__native_set_fixmap(idx, pfn_pte(phys >> PAGE_SHIFT, flags));
}
x86, mm: support huge KVA mappings on x86 Implement huge KVA mapping interfaces on x86. On x86, MTRRs can override PAT memory types with a 4KB granularity. When using a huge page, MTRRs can override the memory type of the huge page, which may lead a performance penalty. The processor can also behave in an undefined manner if a huge page is mapped to a memory range that MTRRs have mapped with multiple different memory types. Therefore, the mapping code falls back to use a smaller page size toward 4KB when a mapping range is covered by non-WB type of MTRRs. The WB type of MTRRs has no affect on the PAT memory types. pud_set_huge() and pmd_set_huge() call mtrr_type_lookup() to see if a given range is covered by MTRRs. MTRR_TYPE_WRBACK indicates that the range is either covered by WB or not covered and the MTRR default value is set to WB. 0xFF indicates that MTRRs are disabled. HAVE_ARCH_HUGE_VMAP is selected when X86_64 or X86_32 with X86_PAE is set. X86_32 without X86_PAE is not supported since such config can unlikey be benefited from this feature, and there was an issue found in testing. [fengguang.wu@intel.com: ioremap_pud_capable can be static] Signed-off-by: Toshi Kani <toshi.kani@hp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Robert Elliott <Elliott@hp.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 05:47:32 +07:00
#ifdef CONFIG_HAVE_ARCH_HUGE_VMAP
#ifdef CONFIG_X86_5LEVEL
/**
* p4d_set_huge - setup kernel P4D mapping
*
* No 512GB pages yet -- always return 0
*/
int p4d_set_huge(p4d_t *p4d, phys_addr_t addr, pgprot_t prot)
{
return 0;
}
/**
* p4d_clear_huge - clear kernel P4D mapping when it is set
*
* No 512GB pages yet -- always return 0
*/
int p4d_clear_huge(p4d_t *p4d)
{
return 0;
}
#endif
/**
* pud_set_huge - setup kernel PUD mapping
*
x86/mm/mtrr: Enhance MTRR checks in kernel mapping helpers This patch adds the argument 'uniform' to mtrr_type_lookup(), which gets set to 1 when a given range is covered uniformly by MTRRs, i.e. the range is fully covered by a single MTRR entry or the default type. Change pud_set_huge() and pmd_set_huge() to honor the 'uniform' flag to see if it is safe to create a huge page mapping in the range. This allows them to create a huge page mapping in a range covered by a single MTRR entry of any memory type. It also detects a non-optimal request properly. They continue to check with the WB type since it does not effectively change the uniform mapping even if a request spans multiple MTRR entries. pmd_set_huge() logs a warning message to a non-optimal request so that driver writers will be aware of such a case. Drivers should make a mapping request aligned to a single MTRR entry when the range is covered by MTRRs. Signed-off-by: Toshi Kani <toshi.kani@hp.com> [ Realign, flesh out comments, improve warning message. ] Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Elliott@hp.com Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave.hansen@intel.com Cc: linux-mm <linux-mm@kvack.org> Cc: pebolle@tiscali.nl Link: http://lkml.kernel.org/r/1431714237-880-7-git-send-email-toshi.kani@hp.com Link: http://lkml.kernel.org/r/1432628901-18044-8-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-26 15:28:10 +07:00
* MTRRs can override PAT memory types with 4KiB granularity. Therefore, this
* function sets up a huge page only if any of the following conditions are met:
*
* - MTRRs are disabled, or
*
* - MTRRs are enabled and the range is completely covered by a single MTRR, or
*
* - MTRRs are enabled and the corresponding MTRR memory type is WB, which
* has no effect on the requested PAT memory type.
*
* Callers should try to decrease page size (1GB -> 2MB -> 4K) if the bigger
* page mapping attempt fails.
*
* Returns 1 on success and 0 on failure.
*/
x86, mm: support huge KVA mappings on x86 Implement huge KVA mapping interfaces on x86. On x86, MTRRs can override PAT memory types with a 4KB granularity. When using a huge page, MTRRs can override the memory type of the huge page, which may lead a performance penalty. The processor can also behave in an undefined manner if a huge page is mapped to a memory range that MTRRs have mapped with multiple different memory types. Therefore, the mapping code falls back to use a smaller page size toward 4KB when a mapping range is covered by non-WB type of MTRRs. The WB type of MTRRs has no affect on the PAT memory types. pud_set_huge() and pmd_set_huge() call mtrr_type_lookup() to see if a given range is covered by MTRRs. MTRR_TYPE_WRBACK indicates that the range is either covered by WB or not covered and the MTRR default value is set to WB. 0xFF indicates that MTRRs are disabled. HAVE_ARCH_HUGE_VMAP is selected when X86_64 or X86_32 with X86_PAE is set. X86_32 without X86_PAE is not supported since such config can unlikey be benefited from this feature, and there was an issue found in testing. [fengguang.wu@intel.com: ioremap_pud_capable can be static] Signed-off-by: Toshi Kani <toshi.kani@hp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Robert Elliott <Elliott@hp.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 05:47:32 +07:00
int pud_set_huge(pud_t *pud, phys_addr_t addr, pgprot_t prot)
{
x86/mm/mtrr: Enhance MTRR checks in kernel mapping helpers This patch adds the argument 'uniform' to mtrr_type_lookup(), which gets set to 1 when a given range is covered uniformly by MTRRs, i.e. the range is fully covered by a single MTRR entry or the default type. Change pud_set_huge() and pmd_set_huge() to honor the 'uniform' flag to see if it is safe to create a huge page mapping in the range. This allows them to create a huge page mapping in a range covered by a single MTRR entry of any memory type. It also detects a non-optimal request properly. They continue to check with the WB type since it does not effectively change the uniform mapping even if a request spans multiple MTRR entries. pmd_set_huge() logs a warning message to a non-optimal request so that driver writers will be aware of such a case. Drivers should make a mapping request aligned to a single MTRR entry when the range is covered by MTRRs. Signed-off-by: Toshi Kani <toshi.kani@hp.com> [ Realign, flesh out comments, improve warning message. ] Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Elliott@hp.com Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave.hansen@intel.com Cc: linux-mm <linux-mm@kvack.org> Cc: pebolle@tiscali.nl Link: http://lkml.kernel.org/r/1431714237-880-7-git-send-email-toshi.kani@hp.com Link: http://lkml.kernel.org/r/1432628901-18044-8-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-26 15:28:10 +07:00
u8 mtrr, uniform;
x86, mm: support huge KVA mappings on x86 Implement huge KVA mapping interfaces on x86. On x86, MTRRs can override PAT memory types with a 4KB granularity. When using a huge page, MTRRs can override the memory type of the huge page, which may lead a performance penalty. The processor can also behave in an undefined manner if a huge page is mapped to a memory range that MTRRs have mapped with multiple different memory types. Therefore, the mapping code falls back to use a smaller page size toward 4KB when a mapping range is covered by non-WB type of MTRRs. The WB type of MTRRs has no affect on the PAT memory types. pud_set_huge() and pmd_set_huge() call mtrr_type_lookup() to see if a given range is covered by MTRRs. MTRR_TYPE_WRBACK indicates that the range is either covered by WB or not covered and the MTRR default value is set to WB. 0xFF indicates that MTRRs are disabled. HAVE_ARCH_HUGE_VMAP is selected when X86_64 or X86_32 with X86_PAE is set. X86_32 without X86_PAE is not supported since such config can unlikey be benefited from this feature, and there was an issue found in testing. [fengguang.wu@intel.com: ioremap_pud_capable can be static] Signed-off-by: Toshi Kani <toshi.kani@hp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Robert Elliott <Elliott@hp.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 05:47:32 +07:00
x86/mm/mtrr: Enhance MTRR checks in kernel mapping helpers This patch adds the argument 'uniform' to mtrr_type_lookup(), which gets set to 1 when a given range is covered uniformly by MTRRs, i.e. the range is fully covered by a single MTRR entry or the default type. Change pud_set_huge() and pmd_set_huge() to honor the 'uniform' flag to see if it is safe to create a huge page mapping in the range. This allows them to create a huge page mapping in a range covered by a single MTRR entry of any memory type. It also detects a non-optimal request properly. They continue to check with the WB type since it does not effectively change the uniform mapping even if a request spans multiple MTRR entries. pmd_set_huge() logs a warning message to a non-optimal request so that driver writers will be aware of such a case. Drivers should make a mapping request aligned to a single MTRR entry when the range is covered by MTRRs. Signed-off-by: Toshi Kani <toshi.kani@hp.com> [ Realign, flesh out comments, improve warning message. ] Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Elliott@hp.com Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave.hansen@intel.com Cc: linux-mm <linux-mm@kvack.org> Cc: pebolle@tiscali.nl Link: http://lkml.kernel.org/r/1431714237-880-7-git-send-email-toshi.kani@hp.com Link: http://lkml.kernel.org/r/1432628901-18044-8-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-26 15:28:10 +07:00
mtrr = mtrr_type_lookup(addr, addr + PUD_SIZE, &uniform);
if ((mtrr != MTRR_TYPE_INVALID) && (!uniform) &&
(mtrr != MTRR_TYPE_WRBACK))
x86, mm: support huge KVA mappings on x86 Implement huge KVA mapping interfaces on x86. On x86, MTRRs can override PAT memory types with a 4KB granularity. When using a huge page, MTRRs can override the memory type of the huge page, which may lead a performance penalty. The processor can also behave in an undefined manner if a huge page is mapped to a memory range that MTRRs have mapped with multiple different memory types. Therefore, the mapping code falls back to use a smaller page size toward 4KB when a mapping range is covered by non-WB type of MTRRs. The WB type of MTRRs has no affect on the PAT memory types. pud_set_huge() and pmd_set_huge() call mtrr_type_lookup() to see if a given range is covered by MTRRs. MTRR_TYPE_WRBACK indicates that the range is either covered by WB or not covered and the MTRR default value is set to WB. 0xFF indicates that MTRRs are disabled. HAVE_ARCH_HUGE_VMAP is selected when X86_64 or X86_32 with X86_PAE is set. X86_32 without X86_PAE is not supported since such config can unlikey be benefited from this feature, and there was an issue found in testing. [fengguang.wu@intel.com: ioremap_pud_capable can be static] Signed-off-by: Toshi Kani <toshi.kani@hp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Robert Elliott <Elliott@hp.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 05:47:32 +07:00
return 0;
x86/pgtable: Don't set huge PUD/PMD on non-leaf entries The pmd_set_huge() and pud_set_huge() functions are used from the generic ioremap() code to establish large mappings where this is possible. But the generic ioremap() code does not check whether the PMD/PUD entries are already populated with a non-leaf entry, so that any page-table pages these entries point to will be lost. Further, on x86-32 with SHARED_KERNEL_PMD=0, this causes a BUG_ON() in vmalloc_sync_one() when PMD entries are synced from swapper_pg_dir to the current page-table. This happens because the PMD entry from swapper_pg_dir was promoted to a huge-page entry while the current PGD still contains the non-leaf entry. Because both entries are present and point to a different page, the BUG_ON() triggers. This was actually triggered with pti-x32 enabled in a KVM virtual machine by the graphics driver. A real and better fix for that would be to improve the page-table handling in the generic ioremap() code. But that is out-of-scope for this patch-set and left for later work. Reported-by: David H. Gutteridge <dhgutteridge@sympatico.ca> Signed-off-by: Joerg Roedel <jroedel@suse.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Waiman Long <llong@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180411152437.GC15462@8bytes.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-11 22:24:38 +07:00
/* Bail out if we are we on a populated non-leaf entry: */
if (pud_present(*pud) && !pud_huge(*pud))
return 0;
x86, mm: support huge KVA mappings on x86 Implement huge KVA mapping interfaces on x86. On x86, MTRRs can override PAT memory types with a 4KB granularity. When using a huge page, MTRRs can override the memory type of the huge page, which may lead a performance penalty. The processor can also behave in an undefined manner if a huge page is mapped to a memory range that MTRRs have mapped with multiple different memory types. Therefore, the mapping code falls back to use a smaller page size toward 4KB when a mapping range is covered by non-WB type of MTRRs. The WB type of MTRRs has no affect on the PAT memory types. pud_set_huge() and pmd_set_huge() call mtrr_type_lookup() to see if a given range is covered by MTRRs. MTRR_TYPE_WRBACK indicates that the range is either covered by WB or not covered and the MTRR default value is set to WB. 0xFF indicates that MTRRs are disabled. HAVE_ARCH_HUGE_VMAP is selected when X86_64 or X86_32 with X86_PAE is set. X86_32 without X86_PAE is not supported since such config can unlikey be benefited from this feature, and there was an issue found in testing. [fengguang.wu@intel.com: ioremap_pud_capable can be static] Signed-off-by: Toshi Kani <toshi.kani@hp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Robert Elliott <Elliott@hp.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 05:47:32 +07:00
set_pte((pte_t *)pud, pfn_pte(
(u64)addr >> PAGE_SHIFT,
__pgprot(protval_4k_2_large(pgprot_val(prot)) | _PAGE_PSE)));
x86, mm: support huge KVA mappings on x86 Implement huge KVA mapping interfaces on x86. On x86, MTRRs can override PAT memory types with a 4KB granularity. When using a huge page, MTRRs can override the memory type of the huge page, which may lead a performance penalty. The processor can also behave in an undefined manner if a huge page is mapped to a memory range that MTRRs have mapped with multiple different memory types. Therefore, the mapping code falls back to use a smaller page size toward 4KB when a mapping range is covered by non-WB type of MTRRs. The WB type of MTRRs has no affect on the PAT memory types. pud_set_huge() and pmd_set_huge() call mtrr_type_lookup() to see if a given range is covered by MTRRs. MTRR_TYPE_WRBACK indicates that the range is either covered by WB or not covered and the MTRR default value is set to WB. 0xFF indicates that MTRRs are disabled. HAVE_ARCH_HUGE_VMAP is selected when X86_64 or X86_32 with X86_PAE is set. X86_32 without X86_PAE is not supported since such config can unlikey be benefited from this feature, and there was an issue found in testing. [fengguang.wu@intel.com: ioremap_pud_capable can be static] Signed-off-by: Toshi Kani <toshi.kani@hp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Robert Elliott <Elliott@hp.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 05:47:32 +07:00
return 1;
}
/**
* pmd_set_huge - setup kernel PMD mapping
*
x86/mm/mtrr: Enhance MTRR checks in kernel mapping helpers This patch adds the argument 'uniform' to mtrr_type_lookup(), which gets set to 1 when a given range is covered uniformly by MTRRs, i.e. the range is fully covered by a single MTRR entry or the default type. Change pud_set_huge() and pmd_set_huge() to honor the 'uniform' flag to see if it is safe to create a huge page mapping in the range. This allows them to create a huge page mapping in a range covered by a single MTRR entry of any memory type. It also detects a non-optimal request properly. They continue to check with the WB type since it does not effectively change the uniform mapping even if a request spans multiple MTRR entries. pmd_set_huge() logs a warning message to a non-optimal request so that driver writers will be aware of such a case. Drivers should make a mapping request aligned to a single MTRR entry when the range is covered by MTRRs. Signed-off-by: Toshi Kani <toshi.kani@hp.com> [ Realign, flesh out comments, improve warning message. ] Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Elliott@hp.com Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave.hansen@intel.com Cc: linux-mm <linux-mm@kvack.org> Cc: pebolle@tiscali.nl Link: http://lkml.kernel.org/r/1431714237-880-7-git-send-email-toshi.kani@hp.com Link: http://lkml.kernel.org/r/1432628901-18044-8-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-26 15:28:10 +07:00
* See text over pud_set_huge() above.
*
* Returns 1 on success and 0 on failure.
*/
x86, mm: support huge KVA mappings on x86 Implement huge KVA mapping interfaces on x86. On x86, MTRRs can override PAT memory types with a 4KB granularity. When using a huge page, MTRRs can override the memory type of the huge page, which may lead a performance penalty. The processor can also behave in an undefined manner if a huge page is mapped to a memory range that MTRRs have mapped with multiple different memory types. Therefore, the mapping code falls back to use a smaller page size toward 4KB when a mapping range is covered by non-WB type of MTRRs. The WB type of MTRRs has no affect on the PAT memory types. pud_set_huge() and pmd_set_huge() call mtrr_type_lookup() to see if a given range is covered by MTRRs. MTRR_TYPE_WRBACK indicates that the range is either covered by WB or not covered and the MTRR default value is set to WB. 0xFF indicates that MTRRs are disabled. HAVE_ARCH_HUGE_VMAP is selected when X86_64 or X86_32 with X86_PAE is set. X86_32 without X86_PAE is not supported since such config can unlikey be benefited from this feature, and there was an issue found in testing. [fengguang.wu@intel.com: ioremap_pud_capable can be static] Signed-off-by: Toshi Kani <toshi.kani@hp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Robert Elliott <Elliott@hp.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 05:47:32 +07:00
int pmd_set_huge(pmd_t *pmd, phys_addr_t addr, pgprot_t prot)
{
x86/mm/mtrr: Enhance MTRR checks in kernel mapping helpers This patch adds the argument 'uniform' to mtrr_type_lookup(), which gets set to 1 when a given range is covered uniformly by MTRRs, i.e. the range is fully covered by a single MTRR entry or the default type. Change pud_set_huge() and pmd_set_huge() to honor the 'uniform' flag to see if it is safe to create a huge page mapping in the range. This allows them to create a huge page mapping in a range covered by a single MTRR entry of any memory type. It also detects a non-optimal request properly. They continue to check with the WB type since it does not effectively change the uniform mapping even if a request spans multiple MTRR entries. pmd_set_huge() logs a warning message to a non-optimal request so that driver writers will be aware of such a case. Drivers should make a mapping request aligned to a single MTRR entry when the range is covered by MTRRs. Signed-off-by: Toshi Kani <toshi.kani@hp.com> [ Realign, flesh out comments, improve warning message. ] Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Elliott@hp.com Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave.hansen@intel.com Cc: linux-mm <linux-mm@kvack.org> Cc: pebolle@tiscali.nl Link: http://lkml.kernel.org/r/1431714237-880-7-git-send-email-toshi.kani@hp.com Link: http://lkml.kernel.org/r/1432628901-18044-8-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-26 15:28:10 +07:00
u8 mtrr, uniform;
x86, mm: support huge KVA mappings on x86 Implement huge KVA mapping interfaces on x86. On x86, MTRRs can override PAT memory types with a 4KB granularity. When using a huge page, MTRRs can override the memory type of the huge page, which may lead a performance penalty. The processor can also behave in an undefined manner if a huge page is mapped to a memory range that MTRRs have mapped with multiple different memory types. Therefore, the mapping code falls back to use a smaller page size toward 4KB when a mapping range is covered by non-WB type of MTRRs. The WB type of MTRRs has no affect on the PAT memory types. pud_set_huge() and pmd_set_huge() call mtrr_type_lookup() to see if a given range is covered by MTRRs. MTRR_TYPE_WRBACK indicates that the range is either covered by WB or not covered and the MTRR default value is set to WB. 0xFF indicates that MTRRs are disabled. HAVE_ARCH_HUGE_VMAP is selected when X86_64 or X86_32 with X86_PAE is set. X86_32 without X86_PAE is not supported since such config can unlikey be benefited from this feature, and there was an issue found in testing. [fengguang.wu@intel.com: ioremap_pud_capable can be static] Signed-off-by: Toshi Kani <toshi.kani@hp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Robert Elliott <Elliott@hp.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 05:47:32 +07:00
x86/mm/mtrr: Enhance MTRR checks in kernel mapping helpers This patch adds the argument 'uniform' to mtrr_type_lookup(), which gets set to 1 when a given range is covered uniformly by MTRRs, i.e. the range is fully covered by a single MTRR entry or the default type. Change pud_set_huge() and pmd_set_huge() to honor the 'uniform' flag to see if it is safe to create a huge page mapping in the range. This allows them to create a huge page mapping in a range covered by a single MTRR entry of any memory type. It also detects a non-optimal request properly. They continue to check with the WB type since it does not effectively change the uniform mapping even if a request spans multiple MTRR entries. pmd_set_huge() logs a warning message to a non-optimal request so that driver writers will be aware of such a case. Drivers should make a mapping request aligned to a single MTRR entry when the range is covered by MTRRs. Signed-off-by: Toshi Kani <toshi.kani@hp.com> [ Realign, flesh out comments, improve warning message. ] Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Elliott@hp.com Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave.hansen@intel.com Cc: linux-mm <linux-mm@kvack.org> Cc: pebolle@tiscali.nl Link: http://lkml.kernel.org/r/1431714237-880-7-git-send-email-toshi.kani@hp.com Link: http://lkml.kernel.org/r/1432628901-18044-8-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-26 15:28:10 +07:00
mtrr = mtrr_type_lookup(addr, addr + PMD_SIZE, &uniform);
if ((mtrr != MTRR_TYPE_INVALID) && (!uniform) &&
(mtrr != MTRR_TYPE_WRBACK)) {
pr_warn_once("%s: Cannot satisfy [mem %#010llx-%#010llx] with a huge-page mapping due to MTRR override.\n",
__func__, addr, addr + PMD_SIZE);
x86, mm: support huge KVA mappings on x86 Implement huge KVA mapping interfaces on x86. On x86, MTRRs can override PAT memory types with a 4KB granularity. When using a huge page, MTRRs can override the memory type of the huge page, which may lead a performance penalty. The processor can also behave in an undefined manner if a huge page is mapped to a memory range that MTRRs have mapped with multiple different memory types. Therefore, the mapping code falls back to use a smaller page size toward 4KB when a mapping range is covered by non-WB type of MTRRs. The WB type of MTRRs has no affect on the PAT memory types. pud_set_huge() and pmd_set_huge() call mtrr_type_lookup() to see if a given range is covered by MTRRs. MTRR_TYPE_WRBACK indicates that the range is either covered by WB or not covered and the MTRR default value is set to WB. 0xFF indicates that MTRRs are disabled. HAVE_ARCH_HUGE_VMAP is selected when X86_64 or X86_32 with X86_PAE is set. X86_32 without X86_PAE is not supported since such config can unlikey be benefited from this feature, and there was an issue found in testing. [fengguang.wu@intel.com: ioremap_pud_capable can be static] Signed-off-by: Toshi Kani <toshi.kani@hp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Robert Elliott <Elliott@hp.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 05:47:32 +07:00
return 0;
x86/mm/mtrr: Enhance MTRR checks in kernel mapping helpers This patch adds the argument 'uniform' to mtrr_type_lookup(), which gets set to 1 when a given range is covered uniformly by MTRRs, i.e. the range is fully covered by a single MTRR entry or the default type. Change pud_set_huge() and pmd_set_huge() to honor the 'uniform' flag to see if it is safe to create a huge page mapping in the range. This allows them to create a huge page mapping in a range covered by a single MTRR entry of any memory type. It also detects a non-optimal request properly. They continue to check with the WB type since it does not effectively change the uniform mapping even if a request spans multiple MTRR entries. pmd_set_huge() logs a warning message to a non-optimal request so that driver writers will be aware of such a case. Drivers should make a mapping request aligned to a single MTRR entry when the range is covered by MTRRs. Signed-off-by: Toshi Kani <toshi.kani@hp.com> [ Realign, flesh out comments, improve warning message. ] Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Elliott@hp.com Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave.hansen@intel.com Cc: linux-mm <linux-mm@kvack.org> Cc: pebolle@tiscali.nl Link: http://lkml.kernel.org/r/1431714237-880-7-git-send-email-toshi.kani@hp.com Link: http://lkml.kernel.org/r/1432628901-18044-8-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-26 15:28:10 +07:00
}
x86, mm: support huge KVA mappings on x86 Implement huge KVA mapping interfaces on x86. On x86, MTRRs can override PAT memory types with a 4KB granularity. When using a huge page, MTRRs can override the memory type of the huge page, which may lead a performance penalty. The processor can also behave in an undefined manner if a huge page is mapped to a memory range that MTRRs have mapped with multiple different memory types. Therefore, the mapping code falls back to use a smaller page size toward 4KB when a mapping range is covered by non-WB type of MTRRs. The WB type of MTRRs has no affect on the PAT memory types. pud_set_huge() and pmd_set_huge() call mtrr_type_lookup() to see if a given range is covered by MTRRs. MTRR_TYPE_WRBACK indicates that the range is either covered by WB or not covered and the MTRR default value is set to WB. 0xFF indicates that MTRRs are disabled. HAVE_ARCH_HUGE_VMAP is selected when X86_64 or X86_32 with X86_PAE is set. X86_32 without X86_PAE is not supported since such config can unlikey be benefited from this feature, and there was an issue found in testing. [fengguang.wu@intel.com: ioremap_pud_capable can be static] Signed-off-by: Toshi Kani <toshi.kani@hp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Robert Elliott <Elliott@hp.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 05:47:32 +07:00
x86/pgtable: Don't set huge PUD/PMD on non-leaf entries The pmd_set_huge() and pud_set_huge() functions are used from the generic ioremap() code to establish large mappings where this is possible. But the generic ioremap() code does not check whether the PMD/PUD entries are already populated with a non-leaf entry, so that any page-table pages these entries point to will be lost. Further, on x86-32 with SHARED_KERNEL_PMD=0, this causes a BUG_ON() in vmalloc_sync_one() when PMD entries are synced from swapper_pg_dir to the current page-table. This happens because the PMD entry from swapper_pg_dir was promoted to a huge-page entry while the current PGD still contains the non-leaf entry. Because both entries are present and point to a different page, the BUG_ON() triggers. This was actually triggered with pti-x32 enabled in a KVM virtual machine by the graphics driver. A real and better fix for that would be to improve the page-table handling in the generic ioremap() code. But that is out-of-scope for this patch-set and left for later work. Reported-by: David H. Gutteridge <dhgutteridge@sympatico.ca> Signed-off-by: Joerg Roedel <jroedel@suse.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Waiman Long <llong@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180411152437.GC15462@8bytes.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-11 22:24:38 +07:00
/* Bail out if we are we on a populated non-leaf entry: */
if (pmd_present(*pmd) && !pmd_huge(*pmd))
return 0;
x86, mm: support huge KVA mappings on x86 Implement huge KVA mapping interfaces on x86. On x86, MTRRs can override PAT memory types with a 4KB granularity. When using a huge page, MTRRs can override the memory type of the huge page, which may lead a performance penalty. The processor can also behave in an undefined manner if a huge page is mapped to a memory range that MTRRs have mapped with multiple different memory types. Therefore, the mapping code falls back to use a smaller page size toward 4KB when a mapping range is covered by non-WB type of MTRRs. The WB type of MTRRs has no affect on the PAT memory types. pud_set_huge() and pmd_set_huge() call mtrr_type_lookup() to see if a given range is covered by MTRRs. MTRR_TYPE_WRBACK indicates that the range is either covered by WB or not covered and the MTRR default value is set to WB. 0xFF indicates that MTRRs are disabled. HAVE_ARCH_HUGE_VMAP is selected when X86_64 or X86_32 with X86_PAE is set. X86_32 without X86_PAE is not supported since such config can unlikey be benefited from this feature, and there was an issue found in testing. [fengguang.wu@intel.com: ioremap_pud_capable can be static] Signed-off-by: Toshi Kani <toshi.kani@hp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Robert Elliott <Elliott@hp.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 05:47:32 +07:00
set_pte((pte_t *)pmd, pfn_pte(
(u64)addr >> PAGE_SHIFT,
__pgprot(protval_4k_2_large(pgprot_val(prot)) | _PAGE_PSE)));
x86, mm: support huge KVA mappings on x86 Implement huge KVA mapping interfaces on x86. On x86, MTRRs can override PAT memory types with a 4KB granularity. When using a huge page, MTRRs can override the memory type of the huge page, which may lead a performance penalty. The processor can also behave in an undefined manner if a huge page is mapped to a memory range that MTRRs have mapped with multiple different memory types. Therefore, the mapping code falls back to use a smaller page size toward 4KB when a mapping range is covered by non-WB type of MTRRs. The WB type of MTRRs has no affect on the PAT memory types. pud_set_huge() and pmd_set_huge() call mtrr_type_lookup() to see if a given range is covered by MTRRs. MTRR_TYPE_WRBACK indicates that the range is either covered by WB or not covered and the MTRR default value is set to WB. 0xFF indicates that MTRRs are disabled. HAVE_ARCH_HUGE_VMAP is selected when X86_64 or X86_32 with X86_PAE is set. X86_32 without X86_PAE is not supported since such config can unlikey be benefited from this feature, and there was an issue found in testing. [fengguang.wu@intel.com: ioremap_pud_capable can be static] Signed-off-by: Toshi Kani <toshi.kani@hp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Robert Elliott <Elliott@hp.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 05:47:32 +07:00
return 1;
}
/**
* pud_clear_huge - clear kernel PUD mapping when it is set
*
* Returns 1 on success and 0 on failure (no PUD map is found).
*/
x86, mm: support huge KVA mappings on x86 Implement huge KVA mapping interfaces on x86. On x86, MTRRs can override PAT memory types with a 4KB granularity. When using a huge page, MTRRs can override the memory type of the huge page, which may lead a performance penalty. The processor can also behave in an undefined manner if a huge page is mapped to a memory range that MTRRs have mapped with multiple different memory types. Therefore, the mapping code falls back to use a smaller page size toward 4KB when a mapping range is covered by non-WB type of MTRRs. The WB type of MTRRs has no affect on the PAT memory types. pud_set_huge() and pmd_set_huge() call mtrr_type_lookup() to see if a given range is covered by MTRRs. MTRR_TYPE_WRBACK indicates that the range is either covered by WB or not covered and the MTRR default value is set to WB. 0xFF indicates that MTRRs are disabled. HAVE_ARCH_HUGE_VMAP is selected when X86_64 or X86_32 with X86_PAE is set. X86_32 without X86_PAE is not supported since such config can unlikey be benefited from this feature, and there was an issue found in testing. [fengguang.wu@intel.com: ioremap_pud_capable can be static] Signed-off-by: Toshi Kani <toshi.kani@hp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Robert Elliott <Elliott@hp.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 05:47:32 +07:00
int pud_clear_huge(pud_t *pud)
{
if (pud_large(*pud)) {
pud_clear(pud);
return 1;
}
return 0;
}
/**
* pmd_clear_huge - clear kernel PMD mapping when it is set
*
* Returns 1 on success and 0 on failure (no PMD map is found).
*/
x86, mm: support huge KVA mappings on x86 Implement huge KVA mapping interfaces on x86. On x86, MTRRs can override PAT memory types with a 4KB granularity. When using a huge page, MTRRs can override the memory type of the huge page, which may lead a performance penalty. The processor can also behave in an undefined manner if a huge page is mapped to a memory range that MTRRs have mapped with multiple different memory types. Therefore, the mapping code falls back to use a smaller page size toward 4KB when a mapping range is covered by non-WB type of MTRRs. The WB type of MTRRs has no affect on the PAT memory types. pud_set_huge() and pmd_set_huge() call mtrr_type_lookup() to see if a given range is covered by MTRRs. MTRR_TYPE_WRBACK indicates that the range is either covered by WB or not covered and the MTRR default value is set to WB. 0xFF indicates that MTRRs are disabled. HAVE_ARCH_HUGE_VMAP is selected when X86_64 or X86_32 with X86_PAE is set. X86_32 without X86_PAE is not supported since such config can unlikey be benefited from this feature, and there was an issue found in testing. [fengguang.wu@intel.com: ioremap_pud_capable can be static] Signed-off-by: Toshi Kani <toshi.kani@hp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Robert Elliott <Elliott@hp.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 05:47:32 +07:00
int pmd_clear_huge(pmd_t *pmd)
{
if (pmd_large(*pmd)) {
pmd_clear(pmd);
return 1;
}
return 0;
}
mm/vmalloc: add interfaces to free unmapped page table On architectures with CONFIG_HAVE_ARCH_HUGE_VMAP set, ioremap() may create pud/pmd mappings. A kernel panic was observed on arm64 systems with Cortex-A75 in the following steps as described by Hanjun Guo. 1. ioremap a 4K size, valid page table will build, 2. iounmap it, pte0 will set to 0; 3. ioremap the same address with 2M size, pgd/pmd is unchanged, then set the a new value for pmd; 4. pte0 is leaked; 5. CPU may meet exception because the old pmd is still in TLB, which will lead to kernel panic. This panic is not reproducible on x86. INVLPG, called from iounmap, purges all levels of entries associated with purged address on x86. x86 still has memory leak. The patch changes the ioremap path to free unmapped page table(s) since doing so in the unmap path has the following issues: - The iounmap() path is shared with vunmap(). Since vmap() only supports pte mappings, making vunmap() to free a pte page is an overhead for regular vmap users as they do not need a pte page freed up. - Checking if all entries in a pte page are cleared in the unmap path is racy, and serializing this check is expensive. - The unmap path calls free_vmap_area_noflush() to do lazy TLB purges. Clearing a pud/pmd entry before the lazy TLB purges needs extra TLB purge. Add two interfaces, pud_free_pmd_page() and pmd_free_pte_page(), which clear a given pud/pmd entry and free up a page for the lower level entries. This patch implements their stub functions on x86 and arm64, which work as workaround. [akpm@linux-foundation.org: fix typo in pmd_free_pte_page() stub] Link: http://lkml.kernel.org/r/20180314180155.19492-2-toshi.kani@hpe.com Fixes: e61ce6ade404e ("mm: change ioremap to set up huge I/O mappings") Reported-by: Lei Li <lious.lilei@hisilicon.com> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Wang Xuefeng <wxf.wang@hisilicon.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-23 06:17:20 +07:00
/*
* Until we support 512GB pages, skip them in the vmap area.
*/
int p4d_free_pud_page(p4d_t *p4d, unsigned long addr)
{
return 0;
}
#ifdef CONFIG_X86_64
mm/vmalloc: add interfaces to free unmapped page table On architectures with CONFIG_HAVE_ARCH_HUGE_VMAP set, ioremap() may create pud/pmd mappings. A kernel panic was observed on arm64 systems with Cortex-A75 in the following steps as described by Hanjun Guo. 1. ioremap a 4K size, valid page table will build, 2. iounmap it, pte0 will set to 0; 3. ioremap the same address with 2M size, pgd/pmd is unchanged, then set the a new value for pmd; 4. pte0 is leaked; 5. CPU may meet exception because the old pmd is still in TLB, which will lead to kernel panic. This panic is not reproducible on x86. INVLPG, called from iounmap, purges all levels of entries associated with purged address on x86. x86 still has memory leak. The patch changes the ioremap path to free unmapped page table(s) since doing so in the unmap path has the following issues: - The iounmap() path is shared with vunmap(). Since vmap() only supports pte mappings, making vunmap() to free a pte page is an overhead for regular vmap users as they do not need a pte page freed up. - Checking if all entries in a pte page are cleared in the unmap path is racy, and serializing this check is expensive. - The unmap path calls free_vmap_area_noflush() to do lazy TLB purges. Clearing a pud/pmd entry before the lazy TLB purges needs extra TLB purge. Add two interfaces, pud_free_pmd_page() and pmd_free_pte_page(), which clear a given pud/pmd entry and free up a page for the lower level entries. This patch implements their stub functions on x86 and arm64, which work as workaround. [akpm@linux-foundation.org: fix typo in pmd_free_pte_page() stub] Link: http://lkml.kernel.org/r/20180314180155.19492-2-toshi.kani@hpe.com Fixes: e61ce6ade404e ("mm: change ioremap to set up huge I/O mappings") Reported-by: Lei Li <lious.lilei@hisilicon.com> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Wang Xuefeng <wxf.wang@hisilicon.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-23 06:17:20 +07:00
/**
* pud_free_pmd_page - Clear pud entry and free pmd page.
* @pud: Pointer to a PUD.
ioremap: Update pgtable free interfaces with addr The following kernel panic was observed on ARM64 platform due to a stale TLB entry. 1. ioremap with 4K size, a valid pte page table is set. 2. iounmap it, its pte entry is set to 0. 3. ioremap the same address with 2M size, update its pmd entry with a new value. 4. CPU may hit an exception because the old pmd entry is still in TLB, which leads to a kernel panic. Commit b6bdb7517c3d ("mm/vmalloc: add interfaces to free unmapped page table") has addressed this panic by falling to pte mappings in the above case on ARM64. To support pmd mappings in all cases, TLB purge needs to be performed in this case on ARM64. Add a new arg, 'addr', to pud_free_pmd_page() and pmd_free_pte_page() so that TLB purge can be added later in seprate patches. [toshi.kani@hpe.com: merge changes, rewrite patch description] Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by: Chintan Pandya <cpandya@codeaurora.org> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: mhocko@suse.com Cc: akpm@linux-foundation.org Cc: hpa@zytor.com Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: Will Deacon <will.deacon@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20180627141348.21777-3-toshi.kani@hpe.com
2018-06-27 21:13:47 +07:00
* @addr: Virtual address associated with pud.
mm/vmalloc: add interfaces to free unmapped page table On architectures with CONFIG_HAVE_ARCH_HUGE_VMAP set, ioremap() may create pud/pmd mappings. A kernel panic was observed on arm64 systems with Cortex-A75 in the following steps as described by Hanjun Guo. 1. ioremap a 4K size, valid page table will build, 2. iounmap it, pte0 will set to 0; 3. ioremap the same address with 2M size, pgd/pmd is unchanged, then set the a new value for pmd; 4. pte0 is leaked; 5. CPU may meet exception because the old pmd is still in TLB, which will lead to kernel panic. This panic is not reproducible on x86. INVLPG, called from iounmap, purges all levels of entries associated with purged address on x86. x86 still has memory leak. The patch changes the ioremap path to free unmapped page table(s) since doing so in the unmap path has the following issues: - The iounmap() path is shared with vunmap(). Since vmap() only supports pte mappings, making vunmap() to free a pte page is an overhead for regular vmap users as they do not need a pte page freed up. - Checking if all entries in a pte page are cleared in the unmap path is racy, and serializing this check is expensive. - The unmap path calls free_vmap_area_noflush() to do lazy TLB purges. Clearing a pud/pmd entry before the lazy TLB purges needs extra TLB purge. Add two interfaces, pud_free_pmd_page() and pmd_free_pte_page(), which clear a given pud/pmd entry and free up a page for the lower level entries. This patch implements their stub functions on x86 and arm64, which work as workaround. [akpm@linux-foundation.org: fix typo in pmd_free_pte_page() stub] Link: http://lkml.kernel.org/r/20180314180155.19492-2-toshi.kani@hpe.com Fixes: e61ce6ade404e ("mm: change ioremap to set up huge I/O mappings") Reported-by: Lei Li <lious.lilei@hisilicon.com> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Wang Xuefeng <wxf.wang@hisilicon.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-23 06:17:20 +07:00
*
x86/mm: Add TLB purge to free pmd/pte page interfaces ioremap() calls pud_free_pmd_page() / pmd_free_pte_page() when it creates a pud / pmd map. The following preconditions are met at their entry. - All pte entries for a target pud/pmd address range have been cleared. - System-wide TLB purges have been peformed for a target pud/pmd address range. The preconditions assure that there is no stale TLB entry for the range. Speculation may not cache TLB entries since it requires all levels of page entries, including ptes, to have P & A-bits set for an associated address. However, speculation may cache pud/pmd entries (paging-structure caches) when they have P-bit set. Add a system-wide TLB purge (INVLPG) to a single page after clearing pud/pmd entry's P-bit. SDM 4.10.4.1, Operation that Invalidate TLBs and Paging-Structure Caches, states that: INVLPG invalidates all paging-structure caches associated with the current PCID regardless of the liner addresses to which they correspond. Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: mhocko@suse.com Cc: akpm@linux-foundation.org Cc: hpa@zytor.com Cc: cpandya@codeaurora.org Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: Joerg Roedel <joro@8bytes.org> Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20180627141348.21777-4-toshi.kani@hpe.com
2018-06-27 21:13:48 +07:00
* Context: The pud range has been unmapped and TLB purged.
mm/vmalloc: add interfaces to free unmapped page table On architectures with CONFIG_HAVE_ARCH_HUGE_VMAP set, ioremap() may create pud/pmd mappings. A kernel panic was observed on arm64 systems with Cortex-A75 in the following steps as described by Hanjun Guo. 1. ioremap a 4K size, valid page table will build, 2. iounmap it, pte0 will set to 0; 3. ioremap the same address with 2M size, pgd/pmd is unchanged, then set the a new value for pmd; 4. pte0 is leaked; 5. CPU may meet exception because the old pmd is still in TLB, which will lead to kernel panic. This panic is not reproducible on x86. INVLPG, called from iounmap, purges all levels of entries associated with purged address on x86. x86 still has memory leak. The patch changes the ioremap path to free unmapped page table(s) since doing so in the unmap path has the following issues: - The iounmap() path is shared with vunmap(). Since vmap() only supports pte mappings, making vunmap() to free a pte page is an overhead for regular vmap users as they do not need a pte page freed up. - Checking if all entries in a pte page are cleared in the unmap path is racy, and serializing this check is expensive. - The unmap path calls free_vmap_area_noflush() to do lazy TLB purges. Clearing a pud/pmd entry before the lazy TLB purges needs extra TLB purge. Add two interfaces, pud_free_pmd_page() and pmd_free_pte_page(), which clear a given pud/pmd entry and free up a page for the lower level entries. This patch implements their stub functions on x86 and arm64, which work as workaround. [akpm@linux-foundation.org: fix typo in pmd_free_pte_page() stub] Link: http://lkml.kernel.org/r/20180314180155.19492-2-toshi.kani@hpe.com Fixes: e61ce6ade404e ("mm: change ioremap to set up huge I/O mappings") Reported-by: Lei Li <lious.lilei@hisilicon.com> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Wang Xuefeng <wxf.wang@hisilicon.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-23 06:17:20 +07:00
* Return: 1 if clearing the entry succeeded. 0 otherwise.
x86/mm: Add TLB purge to free pmd/pte page interfaces ioremap() calls pud_free_pmd_page() / pmd_free_pte_page() when it creates a pud / pmd map. The following preconditions are met at their entry. - All pte entries for a target pud/pmd address range have been cleared. - System-wide TLB purges have been peformed for a target pud/pmd address range. The preconditions assure that there is no stale TLB entry for the range. Speculation may not cache TLB entries since it requires all levels of page entries, including ptes, to have P & A-bits set for an associated address. However, speculation may cache pud/pmd entries (paging-structure caches) when they have P-bit set. Add a system-wide TLB purge (INVLPG) to a single page after clearing pud/pmd entry's P-bit. SDM 4.10.4.1, Operation that Invalidate TLBs and Paging-Structure Caches, states that: INVLPG invalidates all paging-structure caches associated with the current PCID regardless of the liner addresses to which they correspond. Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: mhocko@suse.com Cc: akpm@linux-foundation.org Cc: hpa@zytor.com Cc: cpandya@codeaurora.org Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: Joerg Roedel <joro@8bytes.org> Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20180627141348.21777-4-toshi.kani@hpe.com
2018-06-27 21:13:48 +07:00
*
* NOTE: Callers must allow a single page allocation.
mm/vmalloc: add interfaces to free unmapped page table On architectures with CONFIG_HAVE_ARCH_HUGE_VMAP set, ioremap() may create pud/pmd mappings. A kernel panic was observed on arm64 systems with Cortex-A75 in the following steps as described by Hanjun Guo. 1. ioremap a 4K size, valid page table will build, 2. iounmap it, pte0 will set to 0; 3. ioremap the same address with 2M size, pgd/pmd is unchanged, then set the a new value for pmd; 4. pte0 is leaked; 5. CPU may meet exception because the old pmd is still in TLB, which will lead to kernel panic. This panic is not reproducible on x86. INVLPG, called from iounmap, purges all levels of entries associated with purged address on x86. x86 still has memory leak. The patch changes the ioremap path to free unmapped page table(s) since doing so in the unmap path has the following issues: - The iounmap() path is shared with vunmap(). Since vmap() only supports pte mappings, making vunmap() to free a pte page is an overhead for regular vmap users as they do not need a pte page freed up. - Checking if all entries in a pte page are cleared in the unmap path is racy, and serializing this check is expensive. - The unmap path calls free_vmap_area_noflush() to do lazy TLB purges. Clearing a pud/pmd entry before the lazy TLB purges needs extra TLB purge. Add two interfaces, pud_free_pmd_page() and pmd_free_pte_page(), which clear a given pud/pmd entry and free up a page for the lower level entries. This patch implements their stub functions on x86 and arm64, which work as workaround. [akpm@linux-foundation.org: fix typo in pmd_free_pte_page() stub] Link: http://lkml.kernel.org/r/20180314180155.19492-2-toshi.kani@hpe.com Fixes: e61ce6ade404e ("mm: change ioremap to set up huge I/O mappings") Reported-by: Lei Li <lious.lilei@hisilicon.com> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Wang Xuefeng <wxf.wang@hisilicon.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-23 06:17:20 +07:00
*/
ioremap: Update pgtable free interfaces with addr The following kernel panic was observed on ARM64 platform due to a stale TLB entry. 1. ioremap with 4K size, a valid pte page table is set. 2. iounmap it, its pte entry is set to 0. 3. ioremap the same address with 2M size, update its pmd entry with a new value. 4. CPU may hit an exception because the old pmd entry is still in TLB, which leads to a kernel panic. Commit b6bdb7517c3d ("mm/vmalloc: add interfaces to free unmapped page table") has addressed this panic by falling to pte mappings in the above case on ARM64. To support pmd mappings in all cases, TLB purge needs to be performed in this case on ARM64. Add a new arg, 'addr', to pud_free_pmd_page() and pmd_free_pte_page() so that TLB purge can be added later in seprate patches. [toshi.kani@hpe.com: merge changes, rewrite patch description] Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by: Chintan Pandya <cpandya@codeaurora.org> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: mhocko@suse.com Cc: akpm@linux-foundation.org Cc: hpa@zytor.com Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: Will Deacon <will.deacon@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20180627141348.21777-3-toshi.kani@hpe.com
2018-06-27 21:13:47 +07:00
int pud_free_pmd_page(pud_t *pud, unsigned long addr)
mm/vmalloc: add interfaces to free unmapped page table On architectures with CONFIG_HAVE_ARCH_HUGE_VMAP set, ioremap() may create pud/pmd mappings. A kernel panic was observed on arm64 systems with Cortex-A75 in the following steps as described by Hanjun Guo. 1. ioremap a 4K size, valid page table will build, 2. iounmap it, pte0 will set to 0; 3. ioremap the same address with 2M size, pgd/pmd is unchanged, then set the a new value for pmd; 4. pte0 is leaked; 5. CPU may meet exception because the old pmd is still in TLB, which will lead to kernel panic. This panic is not reproducible on x86. INVLPG, called from iounmap, purges all levels of entries associated with purged address on x86. x86 still has memory leak. The patch changes the ioremap path to free unmapped page table(s) since doing so in the unmap path has the following issues: - The iounmap() path is shared with vunmap(). Since vmap() only supports pte mappings, making vunmap() to free a pte page is an overhead for regular vmap users as they do not need a pte page freed up. - Checking if all entries in a pte page are cleared in the unmap path is racy, and serializing this check is expensive. - The unmap path calls free_vmap_area_noflush() to do lazy TLB purges. Clearing a pud/pmd entry before the lazy TLB purges needs extra TLB purge. Add two interfaces, pud_free_pmd_page() and pmd_free_pte_page(), which clear a given pud/pmd entry and free up a page for the lower level entries. This patch implements their stub functions on x86 and arm64, which work as workaround. [akpm@linux-foundation.org: fix typo in pmd_free_pte_page() stub] Link: http://lkml.kernel.org/r/20180314180155.19492-2-toshi.kani@hpe.com Fixes: e61ce6ade404e ("mm: change ioremap to set up huge I/O mappings") Reported-by: Lei Li <lious.lilei@hisilicon.com> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Wang Xuefeng <wxf.wang@hisilicon.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-23 06:17:20 +07:00
{
x86/mm: Add TLB purge to free pmd/pte page interfaces ioremap() calls pud_free_pmd_page() / pmd_free_pte_page() when it creates a pud / pmd map. The following preconditions are met at their entry. - All pte entries for a target pud/pmd address range have been cleared. - System-wide TLB purges have been peformed for a target pud/pmd address range. The preconditions assure that there is no stale TLB entry for the range. Speculation may not cache TLB entries since it requires all levels of page entries, including ptes, to have P & A-bits set for an associated address. However, speculation may cache pud/pmd entries (paging-structure caches) when they have P-bit set. Add a system-wide TLB purge (INVLPG) to a single page after clearing pud/pmd entry's P-bit. SDM 4.10.4.1, Operation that Invalidate TLBs and Paging-Structure Caches, states that: INVLPG invalidates all paging-structure caches associated with the current PCID regardless of the liner addresses to which they correspond. Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: mhocko@suse.com Cc: akpm@linux-foundation.org Cc: hpa@zytor.com Cc: cpandya@codeaurora.org Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: Joerg Roedel <joro@8bytes.org> Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20180627141348.21777-4-toshi.kani@hpe.com
2018-06-27 21:13:48 +07:00
pmd_t *pmd, *pmd_sv;
pte_t *pte;
int i;
pmd = (pmd_t *)pud_page_vaddr(*pud);
x86/mm: Add TLB purge to free pmd/pte page interfaces ioremap() calls pud_free_pmd_page() / pmd_free_pte_page() when it creates a pud / pmd map. The following preconditions are met at their entry. - All pte entries for a target pud/pmd address range have been cleared. - System-wide TLB purges have been peformed for a target pud/pmd address range. The preconditions assure that there is no stale TLB entry for the range. Speculation may not cache TLB entries since it requires all levels of page entries, including ptes, to have P & A-bits set for an associated address. However, speculation may cache pud/pmd entries (paging-structure caches) when they have P-bit set. Add a system-wide TLB purge (INVLPG) to a single page after clearing pud/pmd entry's P-bit. SDM 4.10.4.1, Operation that Invalidate TLBs and Paging-Structure Caches, states that: INVLPG invalidates all paging-structure caches associated with the current PCID regardless of the liner addresses to which they correspond. Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: mhocko@suse.com Cc: akpm@linux-foundation.org Cc: hpa@zytor.com Cc: cpandya@codeaurora.org Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: Joerg Roedel <joro@8bytes.org> Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20180627141348.21777-4-toshi.kani@hpe.com
2018-06-27 21:13:48 +07:00
pmd_sv = (pmd_t *)__get_free_page(GFP_KERNEL);
if (!pmd_sv)
return 0;
x86/mm: Add TLB purge to free pmd/pte page interfaces ioremap() calls pud_free_pmd_page() / pmd_free_pte_page() when it creates a pud / pmd map. The following preconditions are met at their entry. - All pte entries for a target pud/pmd address range have been cleared. - System-wide TLB purges have been peformed for a target pud/pmd address range. The preconditions assure that there is no stale TLB entry for the range. Speculation may not cache TLB entries since it requires all levels of page entries, including ptes, to have P & A-bits set for an associated address. However, speculation may cache pud/pmd entries (paging-structure caches) when they have P-bit set. Add a system-wide TLB purge (INVLPG) to a single page after clearing pud/pmd entry's P-bit. SDM 4.10.4.1, Operation that Invalidate TLBs and Paging-Structure Caches, states that: INVLPG invalidates all paging-structure caches associated with the current PCID regardless of the liner addresses to which they correspond. Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: mhocko@suse.com Cc: akpm@linux-foundation.org Cc: hpa@zytor.com Cc: cpandya@codeaurora.org Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: Joerg Roedel <joro@8bytes.org> Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20180627141348.21777-4-toshi.kani@hpe.com
2018-06-27 21:13:48 +07:00
for (i = 0; i < PTRS_PER_PMD; i++) {
pmd_sv[i] = pmd[i];
if (!pmd_none(pmd[i]))
pmd_clear(&pmd[i]);
}
pud_clear(pud);
x86/mm: Add TLB purge to free pmd/pte page interfaces ioremap() calls pud_free_pmd_page() / pmd_free_pte_page() when it creates a pud / pmd map. The following preconditions are met at their entry. - All pte entries for a target pud/pmd address range have been cleared. - System-wide TLB purges have been peformed for a target pud/pmd address range. The preconditions assure that there is no stale TLB entry for the range. Speculation may not cache TLB entries since it requires all levels of page entries, including ptes, to have P & A-bits set for an associated address. However, speculation may cache pud/pmd entries (paging-structure caches) when they have P-bit set. Add a system-wide TLB purge (INVLPG) to a single page after clearing pud/pmd entry's P-bit. SDM 4.10.4.1, Operation that Invalidate TLBs and Paging-Structure Caches, states that: INVLPG invalidates all paging-structure caches associated with the current PCID regardless of the liner addresses to which they correspond. Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: mhocko@suse.com Cc: akpm@linux-foundation.org Cc: hpa@zytor.com Cc: cpandya@codeaurora.org Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: Joerg Roedel <joro@8bytes.org> Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20180627141348.21777-4-toshi.kani@hpe.com
2018-06-27 21:13:48 +07:00
/* INVLPG to clear all paging-structure caches */
flush_tlb_kernel_range(addr, addr + PAGE_SIZE-1);
for (i = 0; i < PTRS_PER_PMD; i++) {
if (!pmd_none(pmd_sv[i])) {
pte = (pte_t *)pmd_page_vaddr(pmd_sv[i]);
free_page((unsigned long)pte);
}
}
free_page((unsigned long)pmd_sv);
free_page((unsigned long)pmd);
return 1;
mm/vmalloc: add interfaces to free unmapped page table On architectures with CONFIG_HAVE_ARCH_HUGE_VMAP set, ioremap() may create pud/pmd mappings. A kernel panic was observed on arm64 systems with Cortex-A75 in the following steps as described by Hanjun Guo. 1. ioremap a 4K size, valid page table will build, 2. iounmap it, pte0 will set to 0; 3. ioremap the same address with 2M size, pgd/pmd is unchanged, then set the a new value for pmd; 4. pte0 is leaked; 5. CPU may meet exception because the old pmd is still in TLB, which will lead to kernel panic. This panic is not reproducible on x86. INVLPG, called from iounmap, purges all levels of entries associated with purged address on x86. x86 still has memory leak. The patch changes the ioremap path to free unmapped page table(s) since doing so in the unmap path has the following issues: - The iounmap() path is shared with vunmap(). Since vmap() only supports pte mappings, making vunmap() to free a pte page is an overhead for regular vmap users as they do not need a pte page freed up. - Checking if all entries in a pte page are cleared in the unmap path is racy, and serializing this check is expensive. - The unmap path calls free_vmap_area_noflush() to do lazy TLB purges. Clearing a pud/pmd entry before the lazy TLB purges needs extra TLB purge. Add two interfaces, pud_free_pmd_page() and pmd_free_pte_page(), which clear a given pud/pmd entry and free up a page for the lower level entries. This patch implements their stub functions on x86 and arm64, which work as workaround. [akpm@linux-foundation.org: fix typo in pmd_free_pte_page() stub] Link: http://lkml.kernel.org/r/20180314180155.19492-2-toshi.kani@hpe.com Fixes: e61ce6ade404e ("mm: change ioremap to set up huge I/O mappings") Reported-by: Lei Li <lious.lilei@hisilicon.com> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Wang Xuefeng <wxf.wang@hisilicon.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-23 06:17:20 +07:00
}
/**
* pmd_free_pte_page - Clear pmd entry and free pte page.
* @pmd: Pointer to a PMD.
ioremap: Update pgtable free interfaces with addr The following kernel panic was observed on ARM64 platform due to a stale TLB entry. 1. ioremap with 4K size, a valid pte page table is set. 2. iounmap it, its pte entry is set to 0. 3. ioremap the same address with 2M size, update its pmd entry with a new value. 4. CPU may hit an exception because the old pmd entry is still in TLB, which leads to a kernel panic. Commit b6bdb7517c3d ("mm/vmalloc: add interfaces to free unmapped page table") has addressed this panic by falling to pte mappings in the above case on ARM64. To support pmd mappings in all cases, TLB purge needs to be performed in this case on ARM64. Add a new arg, 'addr', to pud_free_pmd_page() and pmd_free_pte_page() so that TLB purge can be added later in seprate patches. [toshi.kani@hpe.com: merge changes, rewrite patch description] Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by: Chintan Pandya <cpandya@codeaurora.org> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: mhocko@suse.com Cc: akpm@linux-foundation.org Cc: hpa@zytor.com Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: Will Deacon <will.deacon@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20180627141348.21777-3-toshi.kani@hpe.com
2018-06-27 21:13:47 +07:00
* @addr: Virtual address associated with pmd.
mm/vmalloc: add interfaces to free unmapped page table On architectures with CONFIG_HAVE_ARCH_HUGE_VMAP set, ioremap() may create pud/pmd mappings. A kernel panic was observed on arm64 systems with Cortex-A75 in the following steps as described by Hanjun Guo. 1. ioremap a 4K size, valid page table will build, 2. iounmap it, pte0 will set to 0; 3. ioremap the same address with 2M size, pgd/pmd is unchanged, then set the a new value for pmd; 4. pte0 is leaked; 5. CPU may meet exception because the old pmd is still in TLB, which will lead to kernel panic. This panic is not reproducible on x86. INVLPG, called from iounmap, purges all levels of entries associated with purged address on x86. x86 still has memory leak. The patch changes the ioremap path to free unmapped page table(s) since doing so in the unmap path has the following issues: - The iounmap() path is shared with vunmap(). Since vmap() only supports pte mappings, making vunmap() to free a pte page is an overhead for regular vmap users as they do not need a pte page freed up. - Checking if all entries in a pte page are cleared in the unmap path is racy, and serializing this check is expensive. - The unmap path calls free_vmap_area_noflush() to do lazy TLB purges. Clearing a pud/pmd entry before the lazy TLB purges needs extra TLB purge. Add two interfaces, pud_free_pmd_page() and pmd_free_pte_page(), which clear a given pud/pmd entry and free up a page for the lower level entries. This patch implements their stub functions on x86 and arm64, which work as workaround. [akpm@linux-foundation.org: fix typo in pmd_free_pte_page() stub] Link: http://lkml.kernel.org/r/20180314180155.19492-2-toshi.kani@hpe.com Fixes: e61ce6ade404e ("mm: change ioremap to set up huge I/O mappings") Reported-by: Lei Li <lious.lilei@hisilicon.com> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Wang Xuefeng <wxf.wang@hisilicon.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-23 06:17:20 +07:00
*
x86/mm: Add TLB purge to free pmd/pte page interfaces ioremap() calls pud_free_pmd_page() / pmd_free_pte_page() when it creates a pud / pmd map. The following preconditions are met at their entry. - All pte entries for a target pud/pmd address range have been cleared. - System-wide TLB purges have been peformed for a target pud/pmd address range. The preconditions assure that there is no stale TLB entry for the range. Speculation may not cache TLB entries since it requires all levels of page entries, including ptes, to have P & A-bits set for an associated address. However, speculation may cache pud/pmd entries (paging-structure caches) when they have P-bit set. Add a system-wide TLB purge (INVLPG) to a single page after clearing pud/pmd entry's P-bit. SDM 4.10.4.1, Operation that Invalidate TLBs and Paging-Structure Caches, states that: INVLPG invalidates all paging-structure caches associated with the current PCID regardless of the liner addresses to which they correspond. Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: mhocko@suse.com Cc: akpm@linux-foundation.org Cc: hpa@zytor.com Cc: cpandya@codeaurora.org Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: Joerg Roedel <joro@8bytes.org> Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20180627141348.21777-4-toshi.kani@hpe.com
2018-06-27 21:13:48 +07:00
* Context: The pmd range has been unmapped and TLB purged.
mm/vmalloc: add interfaces to free unmapped page table On architectures with CONFIG_HAVE_ARCH_HUGE_VMAP set, ioremap() may create pud/pmd mappings. A kernel panic was observed on arm64 systems with Cortex-A75 in the following steps as described by Hanjun Guo. 1. ioremap a 4K size, valid page table will build, 2. iounmap it, pte0 will set to 0; 3. ioremap the same address with 2M size, pgd/pmd is unchanged, then set the a new value for pmd; 4. pte0 is leaked; 5. CPU may meet exception because the old pmd is still in TLB, which will lead to kernel panic. This panic is not reproducible on x86. INVLPG, called from iounmap, purges all levels of entries associated with purged address on x86. x86 still has memory leak. The patch changes the ioremap path to free unmapped page table(s) since doing so in the unmap path has the following issues: - The iounmap() path is shared with vunmap(). Since vmap() only supports pte mappings, making vunmap() to free a pte page is an overhead for regular vmap users as they do not need a pte page freed up. - Checking if all entries in a pte page are cleared in the unmap path is racy, and serializing this check is expensive. - The unmap path calls free_vmap_area_noflush() to do lazy TLB purges. Clearing a pud/pmd entry before the lazy TLB purges needs extra TLB purge. Add two interfaces, pud_free_pmd_page() and pmd_free_pte_page(), which clear a given pud/pmd entry and free up a page for the lower level entries. This patch implements their stub functions on x86 and arm64, which work as workaround. [akpm@linux-foundation.org: fix typo in pmd_free_pte_page() stub] Link: http://lkml.kernel.org/r/20180314180155.19492-2-toshi.kani@hpe.com Fixes: e61ce6ade404e ("mm: change ioremap to set up huge I/O mappings") Reported-by: Lei Li <lious.lilei@hisilicon.com> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Wang Xuefeng <wxf.wang@hisilicon.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-23 06:17:20 +07:00
* Return: 1 if clearing the entry succeeded. 0 otherwise.
*/
ioremap: Update pgtable free interfaces with addr The following kernel panic was observed on ARM64 platform due to a stale TLB entry. 1. ioremap with 4K size, a valid pte page table is set. 2. iounmap it, its pte entry is set to 0. 3. ioremap the same address with 2M size, update its pmd entry with a new value. 4. CPU may hit an exception because the old pmd entry is still in TLB, which leads to a kernel panic. Commit b6bdb7517c3d ("mm/vmalloc: add interfaces to free unmapped page table") has addressed this panic by falling to pte mappings in the above case on ARM64. To support pmd mappings in all cases, TLB purge needs to be performed in this case on ARM64. Add a new arg, 'addr', to pud_free_pmd_page() and pmd_free_pte_page() so that TLB purge can be added later in seprate patches. [toshi.kani@hpe.com: merge changes, rewrite patch description] Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by: Chintan Pandya <cpandya@codeaurora.org> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: mhocko@suse.com Cc: akpm@linux-foundation.org Cc: hpa@zytor.com Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: Will Deacon <will.deacon@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20180627141348.21777-3-toshi.kani@hpe.com
2018-06-27 21:13:47 +07:00
int pmd_free_pte_page(pmd_t *pmd, unsigned long addr)
mm/vmalloc: add interfaces to free unmapped page table On architectures with CONFIG_HAVE_ARCH_HUGE_VMAP set, ioremap() may create pud/pmd mappings. A kernel panic was observed on arm64 systems with Cortex-A75 in the following steps as described by Hanjun Guo. 1. ioremap a 4K size, valid page table will build, 2. iounmap it, pte0 will set to 0; 3. ioremap the same address with 2M size, pgd/pmd is unchanged, then set the a new value for pmd; 4. pte0 is leaked; 5. CPU may meet exception because the old pmd is still in TLB, which will lead to kernel panic. This panic is not reproducible on x86. INVLPG, called from iounmap, purges all levels of entries associated with purged address on x86. x86 still has memory leak. The patch changes the ioremap path to free unmapped page table(s) since doing so in the unmap path has the following issues: - The iounmap() path is shared with vunmap(). Since vmap() only supports pte mappings, making vunmap() to free a pte page is an overhead for regular vmap users as they do not need a pte page freed up. - Checking if all entries in a pte page are cleared in the unmap path is racy, and serializing this check is expensive. - The unmap path calls free_vmap_area_noflush() to do lazy TLB purges. Clearing a pud/pmd entry before the lazy TLB purges needs extra TLB purge. Add two interfaces, pud_free_pmd_page() and pmd_free_pte_page(), which clear a given pud/pmd entry and free up a page for the lower level entries. This patch implements their stub functions on x86 and arm64, which work as workaround. [akpm@linux-foundation.org: fix typo in pmd_free_pte_page() stub] Link: http://lkml.kernel.org/r/20180314180155.19492-2-toshi.kani@hpe.com Fixes: e61ce6ade404e ("mm: change ioremap to set up huge I/O mappings") Reported-by: Lei Li <lious.lilei@hisilicon.com> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Wang Xuefeng <wxf.wang@hisilicon.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-23 06:17:20 +07:00
{
pte_t *pte;
pte = (pte_t *)pmd_page_vaddr(*pmd);
pmd_clear(pmd);
x86/mm: Add TLB purge to free pmd/pte page interfaces ioremap() calls pud_free_pmd_page() / pmd_free_pte_page() when it creates a pud / pmd map. The following preconditions are met at their entry. - All pte entries for a target pud/pmd address range have been cleared. - System-wide TLB purges have been peformed for a target pud/pmd address range. The preconditions assure that there is no stale TLB entry for the range. Speculation may not cache TLB entries since it requires all levels of page entries, including ptes, to have P & A-bits set for an associated address. However, speculation may cache pud/pmd entries (paging-structure caches) when they have P-bit set. Add a system-wide TLB purge (INVLPG) to a single page after clearing pud/pmd entry's P-bit. SDM 4.10.4.1, Operation that Invalidate TLBs and Paging-Structure Caches, states that: INVLPG invalidates all paging-structure caches associated with the current PCID regardless of the liner addresses to which they correspond. Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: mhocko@suse.com Cc: akpm@linux-foundation.org Cc: hpa@zytor.com Cc: cpandya@codeaurora.org Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: Joerg Roedel <joro@8bytes.org> Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20180627141348.21777-4-toshi.kani@hpe.com
2018-06-27 21:13:48 +07:00
/* INVLPG to clear all paging-structure caches */
flush_tlb_kernel_range(addr, addr + PAGE_SIZE-1);
free_page((unsigned long)pte);
return 1;
mm/vmalloc: add interfaces to free unmapped page table On architectures with CONFIG_HAVE_ARCH_HUGE_VMAP set, ioremap() may create pud/pmd mappings. A kernel panic was observed on arm64 systems with Cortex-A75 in the following steps as described by Hanjun Guo. 1. ioremap a 4K size, valid page table will build, 2. iounmap it, pte0 will set to 0; 3. ioremap the same address with 2M size, pgd/pmd is unchanged, then set the a new value for pmd; 4. pte0 is leaked; 5. CPU may meet exception because the old pmd is still in TLB, which will lead to kernel panic. This panic is not reproducible on x86. INVLPG, called from iounmap, purges all levels of entries associated with purged address on x86. x86 still has memory leak. The patch changes the ioremap path to free unmapped page table(s) since doing so in the unmap path has the following issues: - The iounmap() path is shared with vunmap(). Since vmap() only supports pte mappings, making vunmap() to free a pte page is an overhead for regular vmap users as they do not need a pte page freed up. - Checking if all entries in a pte page are cleared in the unmap path is racy, and serializing this check is expensive. - The unmap path calls free_vmap_area_noflush() to do lazy TLB purges. Clearing a pud/pmd entry before the lazy TLB purges needs extra TLB purge. Add two interfaces, pud_free_pmd_page() and pmd_free_pte_page(), which clear a given pud/pmd entry and free up a page for the lower level entries. This patch implements their stub functions on x86 and arm64, which work as workaround. [akpm@linux-foundation.org: fix typo in pmd_free_pte_page() stub] Link: http://lkml.kernel.org/r/20180314180155.19492-2-toshi.kani@hpe.com Fixes: e61ce6ade404e ("mm: change ioremap to set up huge I/O mappings") Reported-by: Lei Li <lious.lilei@hisilicon.com> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Wang Xuefeng <wxf.wang@hisilicon.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-23 06:17:20 +07:00
}
#else /* !CONFIG_X86_64 */
ioremap: Update pgtable free interfaces with addr The following kernel panic was observed on ARM64 platform due to a stale TLB entry. 1. ioremap with 4K size, a valid pte page table is set. 2. iounmap it, its pte entry is set to 0. 3. ioremap the same address with 2M size, update its pmd entry with a new value. 4. CPU may hit an exception because the old pmd entry is still in TLB, which leads to a kernel panic. Commit b6bdb7517c3d ("mm/vmalloc: add interfaces to free unmapped page table") has addressed this panic by falling to pte mappings in the above case on ARM64. To support pmd mappings in all cases, TLB purge needs to be performed in this case on ARM64. Add a new arg, 'addr', to pud_free_pmd_page() and pmd_free_pte_page() so that TLB purge can be added later in seprate patches. [toshi.kani@hpe.com: merge changes, rewrite patch description] Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by: Chintan Pandya <cpandya@codeaurora.org> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: mhocko@suse.com Cc: akpm@linux-foundation.org Cc: hpa@zytor.com Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: Will Deacon <will.deacon@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20180627141348.21777-3-toshi.kani@hpe.com
2018-06-27 21:13:47 +07:00
int pud_free_pmd_page(pud_t *pud, unsigned long addr)
{
return pud_none(*pud);
}
/*
* Disable free page handling on x86-PAE. This assures that ioremap()
* does not update sync'd pmd entries. See vmalloc_sync_one().
*/
ioremap: Update pgtable free interfaces with addr The following kernel panic was observed on ARM64 platform due to a stale TLB entry. 1. ioremap with 4K size, a valid pte page table is set. 2. iounmap it, its pte entry is set to 0. 3. ioremap the same address with 2M size, update its pmd entry with a new value. 4. CPU may hit an exception because the old pmd entry is still in TLB, which leads to a kernel panic. Commit b6bdb7517c3d ("mm/vmalloc: add interfaces to free unmapped page table") has addressed this panic by falling to pte mappings in the above case on ARM64. To support pmd mappings in all cases, TLB purge needs to be performed in this case on ARM64. Add a new arg, 'addr', to pud_free_pmd_page() and pmd_free_pte_page() so that TLB purge can be added later in seprate patches. [toshi.kani@hpe.com: merge changes, rewrite patch description] Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by: Chintan Pandya <cpandya@codeaurora.org> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: mhocko@suse.com Cc: akpm@linux-foundation.org Cc: hpa@zytor.com Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: Will Deacon <will.deacon@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20180627141348.21777-3-toshi.kani@hpe.com
2018-06-27 21:13:47 +07:00
int pmd_free_pte_page(pmd_t *pmd, unsigned long addr)
{
return pmd_none(*pmd);
}
#endif /* CONFIG_X86_64 */
x86, mm: support huge KVA mappings on x86 Implement huge KVA mapping interfaces on x86. On x86, MTRRs can override PAT memory types with a 4KB granularity. When using a huge page, MTRRs can override the memory type of the huge page, which may lead a performance penalty. The processor can also behave in an undefined manner if a huge page is mapped to a memory range that MTRRs have mapped with multiple different memory types. Therefore, the mapping code falls back to use a smaller page size toward 4KB when a mapping range is covered by non-WB type of MTRRs. The WB type of MTRRs has no affect on the PAT memory types. pud_set_huge() and pmd_set_huge() call mtrr_type_lookup() to see if a given range is covered by MTRRs. MTRR_TYPE_WRBACK indicates that the range is either covered by WB or not covered and the MTRR default value is set to WB. 0xFF indicates that MTRRs are disabled. HAVE_ARCH_HUGE_VMAP is selected when X86_64 or X86_32 with X86_PAE is set. X86_32 without X86_PAE is not supported since such config can unlikey be benefited from this feature, and there was an issue found in testing. [fengguang.wu@intel.com: ioremap_pud_capable can be static] Signed-off-by: Toshi Kani <toshi.kani@hp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Robert Elliott <Elliott@hp.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 05:47:32 +07:00
#endif /* CONFIG_HAVE_ARCH_HUGE_VMAP */