linux_dsm_epyc7002/drivers/gpu/drm/qxl/qxl_display.c

1239 lines
33 KiB
C
Raw Normal View History

/*
* Copyright 2013 Red Hat Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
* Authors: Dave Airlie
* Alon Levy
*/
#include <linux/crc32.h>
#include <drm/drm_atomic.h>
drm: Split out drm_probe_helper.h Having the probe helper stuff (which pretty much everyone needs) in the drm_crtc_helper.h file (which atomic drivers should never need) is confusing. Split them out. To make sure I actually achieved the goal here I went through all drivers. And indeed, all atomic drivers are now free of drm_crtc_helper.h includes. v2: Make it compile. There was so much compile fail on arm drivers that I figured I'll better not include any of the acks on v1. v3: Massive rebase because i915 has lost a lot of drmP.h includes, but not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h there was still one, which this patch largely removes. Which means rolling out lots more includes all over. This will also conflict with ongoing drmP.h cleanup by others I expect. v3: Rebase on top of atomic bochs. v4: Review from Laurent for bridge/rcar/omap/shmob/core bits: - (re)move some of the added includes, use the better include files in other places (all suggested from Laurent adopted unchanged). - sort alphabetically v5: Actually try to sort them, and while at it, sort all the ones I touch. v6: Rebase onto i915 changes. v7: Rebase once more. Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by: CK Hu <ck.hu@mediatek.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: virtualization@lists.linux-foundation.org Cc: etnaviv@lists.freedesktop.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: spice-devel@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-tegra@vger.kernel.org Cc: xen-devel@lists.xen.org Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
2019-01-18 04:03:34 +07:00
#include <drm/drm_atomic_helper.h>
qxl: refactor to use drm_fb_helper_fbdev_setup Lots of code can be removed by relying on fb-helper: - "struct drm_framebuffer" moves to fb_helper.fb. - "struct drm_gem_object" moves to fb_helper.obj[0]. - "struct qxl_device" can be inferred as drm_fb_helper is embedded. - qxl_user_framebuffer_create -> drm_gem_fb_create. - qxl_user_framebuffer_destroy -> drm_gem_fb_destroy. - qxl_fbdev_destroy -> drm_fb_helper_fbdev_teardown + vfree(shadow). Remove unused code: - qxl_fbdev_qobj_is_fb, qxl_fbdev_set_suspend. - Unused fields of qxl_fbdev: delayed_ops, delayed_ops_lock, size. Misc notes: - The dirty callback is preserved as it is necessary to trigger update commands in the hw (the screen stays black otherwise). - No idea when .create_handle in drm_framebuffer_funcs is used, but use the same drm_gem_fb_create_handle to match drm_gem_fb_funcs. - I don't know why qxl_fb_find_or_create_single used to check for an existing framebuffer and removed that check to match other drivers. - Use of drm_fb_helper_fbdev_teardown also requires "info->fbdefio" to be dynamically allocated. Replace the existing defio config by drm_fb_helper_defio_init to accomodate this. Testing results: startx with fbdev, modesetting and qxl all seems to work. Tested also with CONFIG_DRM_FBDEV_EMULATION=n, fbdev obviously fails but others are fine. QEMU -spice and QEMU -spice with vdagent and multiple (resized) displays (via remote-viewer) also works. unbind vtconsole and rmmod has *not* regressed (i.e. it still trips on a use-after-free in qxl_check_idle via qxl_ttm_fini). Ideally setup/teardown is replaced by drm_fbdev_generic_setup as that would result in further code reduction, improve error handling (like not leaking shadow memory), but unfortunately QXL has no implementation for qxl_gem_prime_vmap. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Link: http://patchwork.freedesktop.org/patch/msgid/20180910132156.23201-1-peter@lekensteyn.nl Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-09-10 20:21:56 +07:00
#include <drm/drm_gem_framebuffer_helper.h>
drm: Split out drm_probe_helper.h Having the probe helper stuff (which pretty much everyone needs) in the drm_crtc_helper.h file (which atomic drivers should never need) is confusing. Split them out. To make sure I actually achieved the goal here I went through all drivers. And indeed, all atomic drivers are now free of drm_crtc_helper.h includes. v2: Make it compile. There was so much compile fail on arm drivers that I figured I'll better not include any of the acks on v1. v3: Massive rebase because i915 has lost a lot of drmP.h includes, but not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h there was still one, which this patch largely removes. Which means rolling out lots more includes all over. This will also conflict with ongoing drmP.h cleanup by others I expect. v3: Rebase on top of atomic bochs. v4: Review from Laurent for bridge/rcar/omap/shmob/core bits: - (re)move some of the added includes, use the better include files in other places (all suggested from Laurent adopted unchanged). - sort alphabetically v5: Actually try to sort them, and while at it, sort all the ones I touch. v6: Rebase onto i915 changes. v7: Rebase once more. Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by: CK Hu <ck.hu@mediatek.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: virtualization@lists.linux-foundation.org Cc: etnaviv@lists.freedesktop.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: spice-devel@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-tegra@vger.kernel.org Cc: xen-devel@lists.xen.org Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
2019-01-18 04:03:34 +07:00
#include <drm/drm_plane_helper.h>
#include <drm/drm_probe_helper.h>
#include "qxl_drv.h"
#include "qxl_object.h"
static bool qxl_head_enabled(struct qxl_head *head)
{
return head->width && head->height;
}
static int qxl_alloc_client_monitors_config(struct qxl_device *qdev,
unsigned int count)
{
if (qdev->client_monitors_config &&
count > qdev->client_monitors_config->count) {
kfree(qdev->client_monitors_config);
qdev->client_monitors_config = NULL;
}
if (!qdev->client_monitors_config) {
qdev->client_monitors_config = kzalloc(
struct_size(qdev->client_monitors_config,
heads, count), GFP_KERNEL);
if (!qdev->client_monitors_config)
return -ENOMEM;
}
qdev->client_monitors_config->count = count;
return 0;
}
enum {
MONITORS_CONFIG_MODIFIED,
MONITORS_CONFIG_UNCHANGED,
MONITORS_CONFIG_BAD_CRC,
MONITORS_CONFIG_ERROR,
};
static int qxl_display_copy_rom_client_monitors_config(struct qxl_device *qdev)
{
int i;
int num_monitors;
uint32_t crc;
int status = MONITORS_CONFIG_UNCHANGED;
num_monitors = qdev->rom->client_monitors_config.count;
crc = crc32(0, (const uint8_t *)&qdev->rom->client_monitors_config,
sizeof(qdev->rom->client_monitors_config));
if (crc != qdev->rom->client_monitors_config_crc)
return MONITORS_CONFIG_BAD_CRC;
if (!num_monitors) {
DRM_DEBUG_KMS("no client monitors configured\n");
return status;
}
if (num_monitors > qxl_num_crtc) {
DRM_DEBUG_KMS("client monitors list will be truncated: %d < %d\n",
qxl_num_crtc, num_monitors);
num_monitors = qxl_num_crtc;
} else {
num_monitors = qdev->rom->client_monitors_config.count;
}
if (qdev->client_monitors_config
&& (num_monitors != qdev->client_monitors_config->count)) {
status = MONITORS_CONFIG_MODIFIED;
}
if (qxl_alloc_client_monitors_config(qdev, num_monitors)) {
status = MONITORS_CONFIG_ERROR;
return status;
}
/* we copy max from the client but it isn't used */
qdev->client_monitors_config->max_allowed = qxl_num_crtc;
for (i = 0 ; i < qdev->client_monitors_config->count ; ++i) {
struct qxl_urect *c_rect =
&qdev->rom->client_monitors_config.heads[i];
struct qxl_head *client_head =
&qdev->client_monitors_config->heads[i];
if (client_head->x != c_rect->left) {
client_head->x = c_rect->left;
status = MONITORS_CONFIG_MODIFIED;
}
if (client_head->y != c_rect->top) {
client_head->y = c_rect->top;
status = MONITORS_CONFIG_MODIFIED;
}
if (client_head->width != c_rect->right - c_rect->left) {
client_head->width = c_rect->right - c_rect->left;
status = MONITORS_CONFIG_MODIFIED;
}
if (client_head->height != c_rect->bottom - c_rect->top) {
client_head->height = c_rect->bottom - c_rect->top;
status = MONITORS_CONFIG_MODIFIED;
}
if (client_head->surface_id != 0) {
client_head->surface_id = 0;
status = MONITORS_CONFIG_MODIFIED;
}
if (client_head->id != i) {
client_head->id = i;
status = MONITORS_CONFIG_MODIFIED;
}
if (client_head->flags != 0) {
client_head->flags = 0;
status = MONITORS_CONFIG_MODIFIED;
}
DRM_DEBUG_KMS("read %dx%d+%d+%d\n", client_head->width, client_head->height,
client_head->x, client_head->y);
}
return status;
}
static void qxl_update_offset_props(struct qxl_device *qdev)
{
struct drm_device *dev = &qdev->ddev;
struct drm_connector *connector;
struct qxl_output *output;
struct qxl_head *head;
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
output = drm_connector_to_qxl_output(connector);
head = &qdev->client_monitors_config->heads[output->index];
drm_object_property_set_value(&connector->base,
dev->mode_config.suggested_x_property, head->x);
drm_object_property_set_value(&connector->base,
dev->mode_config.suggested_y_property, head->y);
}
}
void qxl_display_read_client_monitors_config(struct qxl_device *qdev)
{
struct drm_device *dev = &qdev->ddev;
int status, retries;
for (retries = 0; retries < 10; retries++) {
status = qxl_display_copy_rom_client_monitors_config(qdev);
if (status != MONITORS_CONFIG_BAD_CRC)
break;
udelay(5);
}
if (status == MONITORS_CONFIG_ERROR) {
DRM_DEBUG_KMS("ignoring client monitors config: error");
return;
}
if (status == MONITORS_CONFIG_BAD_CRC) {
DRM_DEBUG_KMS("ignoring client monitors config: bad crc");
return;
}
if (status == MONITORS_CONFIG_UNCHANGED) {
DRM_DEBUG_KMS("ignoring client monitors config: unchanged");
return;
}
drm_modeset_lock_all(dev);
qxl_update_offset_props(qdev);
drm_modeset_unlock_all(dev);
if (!drm_helper_hpd_irq_event(dev)) {
/* notify that the monitor configuration changed, to
adjust at the arbitrary resolution */
drm_kms_helper_hotplug_event(dev);
}
}
static int qxl_check_mode(struct qxl_device *qdev,
unsigned int width,
unsigned int height)
{
unsigned int stride;
unsigned int size;
if (check_mul_overflow(width, 4u, &stride))
return -EINVAL;
if (check_mul_overflow(stride, height, &size))
return -EINVAL;
if (size > qdev->vram_size)
return -ENOMEM;
return 0;
}
static int qxl_check_framebuffer(struct qxl_device *qdev,
struct qxl_bo *bo)
{
return qxl_check_mode(qdev, bo->surf.width, bo->surf.height);
}
static int qxl_add_mode(struct drm_connector *connector,
unsigned int width,
unsigned int height,
bool preferred)
{
struct drm_device *dev = connector->dev;
struct qxl_device *qdev = dev->dev_private;
struct drm_display_mode *mode = NULL;
int rc;
rc = qxl_check_mode(qdev, width, height);
if (rc != 0)
return 0;
mode = drm_cvt_mode(dev, width, height, 60, false, false, false);
if (preferred)
mode->type |= DRM_MODE_TYPE_PREFERRED;
mode->hdisplay = width;
mode->vdisplay = height;
drm_mode_set_name(mode);
drm_mode_probed_add(connector, mode);
return 1;
}
static int qxl_add_monitors_config_modes(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct qxl_device *qdev = dev->dev_private;
struct qxl_output *output = drm_connector_to_qxl_output(connector);
int h = output->index;
struct qxl_head *head;
if (!qdev->monitors_config)
return 0;
if (h >= qxl_num_crtc)
return 0;
if (!qdev->client_monitors_config)
return 0;
if (h >= qdev->client_monitors_config->count)
return 0;
head = &qdev->client_monitors_config->heads[h];
DRM_DEBUG_KMS("head %d is %dx%d\n", h, head->width, head->height);
return qxl_add_mode(connector, head->width, head->height, true);
}
static struct mode_size {
int w;
int h;
} extra_modes[] = {
{ 720, 480},
{1152, 768},
{1280, 854},
};
static int qxl_add_extra_modes(struct drm_connector *connector)
{
int i, ret = 0;
for (i = 0; i < ARRAY_SIZE(extra_modes); i++)
ret += qxl_add_mode(connector,
extra_modes[i].w,
extra_modes[i].h,
false);
return ret;
}
static void qxl_send_monitors_config(struct qxl_device *qdev)
{
int i;
BUG_ON(!qdev->ram_header->monitors_config);
if (qdev->monitors_config->count == 0)
return;
for (i = 0 ; i < qdev->monitors_config->count ; ++i) {
struct qxl_head *head = &qdev->monitors_config->heads[i];
if (head->y > 8192 || head->x > 8192 ||
head->width > 8192 || head->height > 8192) {
DRM_ERROR("head %d wrong: %dx%d+%d+%d\n",
i, head->width, head->height,
head->x, head->y);
return;
}
}
qxl_io_monitors_config(qdev);
}
static void qxl_crtc_update_monitors_config(struct drm_crtc *crtc,
const char *reason)
{
struct drm_device *dev = crtc->dev;
struct qxl_device *qdev = dev->dev_private;
struct qxl_crtc *qcrtc = to_qxl_crtc(crtc);
struct qxl_head head;
int oldcount, i = qcrtc->index;
if (!qdev->primary_bo) {
DRM_DEBUG_KMS("no primary surface, skip (%s)\n", reason);
return;
}
if (!qdev->monitors_config || qxl_num_crtc <= i)
return;
head.id = i;
head.flags = 0;
oldcount = qdev->monitors_config->count;
if (crtc->state->active) {
struct drm_display_mode *mode = &crtc->mode;
head.width = mode->hdisplay;
head.height = mode->vdisplay;
head.x = crtc->x;
head.y = crtc->y;
if (qdev->monitors_config->count < i + 1)
qdev->monitors_config->count = i + 1;
if (qdev->primary_bo == qdev->dumb_shadow_bo)
head.x += qdev->dumb_heads[i].x;
} else if (i > 0) {
head.width = 0;
head.height = 0;
head.x = 0;
head.y = 0;
if (qdev->monitors_config->count == i + 1)
qdev->monitors_config->count = i;
} else {
DRM_DEBUG_KMS("inactive head 0, skip (%s)\n", reason);
return;
}
if (head.width == qdev->monitors_config->heads[i].width &&
head.height == qdev->monitors_config->heads[i].height &&
head.x == qdev->monitors_config->heads[i].x &&
head.y == qdev->monitors_config->heads[i].y &&
oldcount == qdev->monitors_config->count)
return;
DRM_DEBUG_KMS("head %d, %dx%d, at +%d+%d, %s (%s)\n",
i, head.width, head.height, head.x, head.y,
crtc->state->active ? "on" : "off", reason);
if (oldcount != qdev->monitors_config->count)
DRM_DEBUG_KMS("active heads %d -> %d (%d total)\n",
oldcount, qdev->monitors_config->count,
qxl_num_crtc);
qdev->monitors_config->heads[i] = head;
qdev->monitors_config->max_allowed = qxl_num_crtc;
qxl_send_monitors_config(qdev);
}
static void qxl_crtc_atomic_flush(struct drm_crtc *crtc,
struct drm_crtc_state *old_crtc_state)
{
struct drm_device *dev = crtc->dev;
struct drm_pending_vblank_event *event;
unsigned long flags;
if (crtc->state && crtc->state->event) {
event = crtc->state->event;
crtc->state->event = NULL;
spin_lock_irqsave(&dev->event_lock, flags);
drm_crtc_send_vblank_event(crtc, event);
spin_unlock_irqrestore(&dev->event_lock, flags);
}
qxl_crtc_update_monitors_config(crtc, "flush");
}
static void qxl_crtc_destroy(struct drm_crtc *crtc)
{
struct qxl_crtc *qxl_crtc = to_qxl_crtc(crtc);
qxl_bo_unref(&qxl_crtc->cursor_bo);
drm_crtc_cleanup(crtc);
kfree(qxl_crtc);
}
static const struct drm_crtc_funcs qxl_crtc_funcs = {
.set_config = drm_atomic_helper_set_config,
.destroy = qxl_crtc_destroy,
.page_flip = drm_atomic_helper_page_flip,
.reset = drm_atomic_helper_crtc_reset,
.atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
};
static int qxl_framebuffer_surface_dirty(struct drm_framebuffer *fb,
struct drm_file *file_priv,
unsigned int flags, unsigned int color,
struct drm_clip_rect *clips,
unsigned int num_clips)
{
/* TODO: vmwgfx where this was cribbed from had locking. Why? */
qxl: refactor to use drm_fb_helper_fbdev_setup Lots of code can be removed by relying on fb-helper: - "struct drm_framebuffer" moves to fb_helper.fb. - "struct drm_gem_object" moves to fb_helper.obj[0]. - "struct qxl_device" can be inferred as drm_fb_helper is embedded. - qxl_user_framebuffer_create -> drm_gem_fb_create. - qxl_user_framebuffer_destroy -> drm_gem_fb_destroy. - qxl_fbdev_destroy -> drm_fb_helper_fbdev_teardown + vfree(shadow). Remove unused code: - qxl_fbdev_qobj_is_fb, qxl_fbdev_set_suspend. - Unused fields of qxl_fbdev: delayed_ops, delayed_ops_lock, size. Misc notes: - The dirty callback is preserved as it is necessary to trigger update commands in the hw (the screen stays black otherwise). - No idea when .create_handle in drm_framebuffer_funcs is used, but use the same drm_gem_fb_create_handle to match drm_gem_fb_funcs. - I don't know why qxl_fb_find_or_create_single used to check for an existing framebuffer and removed that check to match other drivers. - Use of drm_fb_helper_fbdev_teardown also requires "info->fbdefio" to be dynamically allocated. Replace the existing defio config by drm_fb_helper_defio_init to accomodate this. Testing results: startx with fbdev, modesetting and qxl all seems to work. Tested also with CONFIG_DRM_FBDEV_EMULATION=n, fbdev obviously fails but others are fine. QEMU -spice and QEMU -spice with vdagent and multiple (resized) displays (via remote-viewer) also works. unbind vtconsole and rmmod has *not* regressed (i.e. it still trips on a use-after-free in qxl_check_idle via qxl_ttm_fini). Ideally setup/teardown is replaced by drm_fbdev_generic_setup as that would result in further code reduction, improve error handling (like not leaking shadow memory), but unfortunately QXL has no implementation for qxl_gem_prime_vmap. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Link: http://patchwork.freedesktop.org/patch/msgid/20180910132156.23201-1-peter@lekensteyn.nl Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-09-10 20:21:56 +07:00
struct qxl_device *qdev = fb->dev->dev_private;
struct drm_clip_rect norect;
struct qxl_bo *qobj;
bool is_primary;
int inc = 1;
drm_modeset_lock_all(fb->dev);
qxl: refactor to use drm_fb_helper_fbdev_setup Lots of code can be removed by relying on fb-helper: - "struct drm_framebuffer" moves to fb_helper.fb. - "struct drm_gem_object" moves to fb_helper.obj[0]. - "struct qxl_device" can be inferred as drm_fb_helper is embedded. - qxl_user_framebuffer_create -> drm_gem_fb_create. - qxl_user_framebuffer_destroy -> drm_gem_fb_destroy. - qxl_fbdev_destroy -> drm_fb_helper_fbdev_teardown + vfree(shadow). Remove unused code: - qxl_fbdev_qobj_is_fb, qxl_fbdev_set_suspend. - Unused fields of qxl_fbdev: delayed_ops, delayed_ops_lock, size. Misc notes: - The dirty callback is preserved as it is necessary to trigger update commands in the hw (the screen stays black otherwise). - No idea when .create_handle in drm_framebuffer_funcs is used, but use the same drm_gem_fb_create_handle to match drm_gem_fb_funcs. - I don't know why qxl_fb_find_or_create_single used to check for an existing framebuffer and removed that check to match other drivers. - Use of drm_fb_helper_fbdev_teardown also requires "info->fbdefio" to be dynamically allocated. Replace the existing defio config by drm_fb_helper_defio_init to accomodate this. Testing results: startx with fbdev, modesetting and qxl all seems to work. Tested also with CONFIG_DRM_FBDEV_EMULATION=n, fbdev obviously fails but others are fine. QEMU -spice and QEMU -spice with vdagent and multiple (resized) displays (via remote-viewer) also works. unbind vtconsole and rmmod has *not* regressed (i.e. it still trips on a use-after-free in qxl_check_idle via qxl_ttm_fini). Ideally setup/teardown is replaced by drm_fbdev_generic_setup as that would result in further code reduction, improve error handling (like not leaking shadow memory), but unfortunately QXL has no implementation for qxl_gem_prime_vmap. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Link: http://patchwork.freedesktop.org/patch/msgid/20180910132156.23201-1-peter@lekensteyn.nl Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-09-10 20:21:56 +07:00
qobj = gem_to_qxl_bo(fb->obj[0]);
/* if we aren't primary surface ignore this */
is_primary = qobj->shadow ? qobj->shadow->is_primary : qobj->is_primary;
if (!is_primary) {
drm_modeset_unlock_all(fb->dev);
return 0;
}
if (!num_clips) {
num_clips = 1;
clips = &norect;
norect.x1 = norect.y1 = 0;
norect.x2 = fb->width;
norect.y2 = fb->height;
} else if (flags & DRM_MODE_FB_DIRTY_ANNOTATE_COPY) {
num_clips /= 2;
inc = 2; /* skip source rects */
}
qxl: refactor to use drm_fb_helper_fbdev_setup Lots of code can be removed by relying on fb-helper: - "struct drm_framebuffer" moves to fb_helper.fb. - "struct drm_gem_object" moves to fb_helper.obj[0]. - "struct qxl_device" can be inferred as drm_fb_helper is embedded. - qxl_user_framebuffer_create -> drm_gem_fb_create. - qxl_user_framebuffer_destroy -> drm_gem_fb_destroy. - qxl_fbdev_destroy -> drm_fb_helper_fbdev_teardown + vfree(shadow). Remove unused code: - qxl_fbdev_qobj_is_fb, qxl_fbdev_set_suspend. - Unused fields of qxl_fbdev: delayed_ops, delayed_ops_lock, size. Misc notes: - The dirty callback is preserved as it is necessary to trigger update commands in the hw (the screen stays black otherwise). - No idea when .create_handle in drm_framebuffer_funcs is used, but use the same drm_gem_fb_create_handle to match drm_gem_fb_funcs. - I don't know why qxl_fb_find_or_create_single used to check for an existing framebuffer and removed that check to match other drivers. - Use of drm_fb_helper_fbdev_teardown also requires "info->fbdefio" to be dynamically allocated. Replace the existing defio config by drm_fb_helper_defio_init to accomodate this. Testing results: startx with fbdev, modesetting and qxl all seems to work. Tested also with CONFIG_DRM_FBDEV_EMULATION=n, fbdev obviously fails but others are fine. QEMU -spice and QEMU -spice with vdagent and multiple (resized) displays (via remote-viewer) also works. unbind vtconsole and rmmod has *not* regressed (i.e. it still trips on a use-after-free in qxl_check_idle via qxl_ttm_fini). Ideally setup/teardown is replaced by drm_fbdev_generic_setup as that would result in further code reduction, improve error handling (like not leaking shadow memory), but unfortunately QXL has no implementation for qxl_gem_prime_vmap. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Link: http://patchwork.freedesktop.org/patch/msgid/20180910132156.23201-1-peter@lekensteyn.nl Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-09-10 20:21:56 +07:00
qxl_draw_dirty_fb(qdev, fb, qobj, flags, color,
clips, num_clips, inc, 0);
drm_modeset_unlock_all(fb->dev);
return 0;
}
static const struct drm_framebuffer_funcs qxl_fb_funcs = {
qxl: refactor to use drm_fb_helper_fbdev_setup Lots of code can be removed by relying on fb-helper: - "struct drm_framebuffer" moves to fb_helper.fb. - "struct drm_gem_object" moves to fb_helper.obj[0]. - "struct qxl_device" can be inferred as drm_fb_helper is embedded. - qxl_user_framebuffer_create -> drm_gem_fb_create. - qxl_user_framebuffer_destroy -> drm_gem_fb_destroy. - qxl_fbdev_destroy -> drm_fb_helper_fbdev_teardown + vfree(shadow). Remove unused code: - qxl_fbdev_qobj_is_fb, qxl_fbdev_set_suspend. - Unused fields of qxl_fbdev: delayed_ops, delayed_ops_lock, size. Misc notes: - The dirty callback is preserved as it is necessary to trigger update commands in the hw (the screen stays black otherwise). - No idea when .create_handle in drm_framebuffer_funcs is used, but use the same drm_gem_fb_create_handle to match drm_gem_fb_funcs. - I don't know why qxl_fb_find_or_create_single used to check for an existing framebuffer and removed that check to match other drivers. - Use of drm_fb_helper_fbdev_teardown also requires "info->fbdefio" to be dynamically allocated. Replace the existing defio config by drm_fb_helper_defio_init to accomodate this. Testing results: startx with fbdev, modesetting and qxl all seems to work. Tested also with CONFIG_DRM_FBDEV_EMULATION=n, fbdev obviously fails but others are fine. QEMU -spice and QEMU -spice with vdagent and multiple (resized) displays (via remote-viewer) also works. unbind vtconsole and rmmod has *not* regressed (i.e. it still trips on a use-after-free in qxl_check_idle via qxl_ttm_fini). Ideally setup/teardown is replaced by drm_fbdev_generic_setup as that would result in further code reduction, improve error handling (like not leaking shadow memory), but unfortunately QXL has no implementation for qxl_gem_prime_vmap. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Link: http://patchwork.freedesktop.org/patch/msgid/20180910132156.23201-1-peter@lekensteyn.nl Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-09-10 20:21:56 +07:00
.destroy = drm_gem_fb_destroy,
.dirty = qxl_framebuffer_surface_dirty,
qxl: refactor to use drm_fb_helper_fbdev_setup Lots of code can be removed by relying on fb-helper: - "struct drm_framebuffer" moves to fb_helper.fb. - "struct drm_gem_object" moves to fb_helper.obj[0]. - "struct qxl_device" can be inferred as drm_fb_helper is embedded. - qxl_user_framebuffer_create -> drm_gem_fb_create. - qxl_user_framebuffer_destroy -> drm_gem_fb_destroy. - qxl_fbdev_destroy -> drm_fb_helper_fbdev_teardown + vfree(shadow). Remove unused code: - qxl_fbdev_qobj_is_fb, qxl_fbdev_set_suspend. - Unused fields of qxl_fbdev: delayed_ops, delayed_ops_lock, size. Misc notes: - The dirty callback is preserved as it is necessary to trigger update commands in the hw (the screen stays black otherwise). - No idea when .create_handle in drm_framebuffer_funcs is used, but use the same drm_gem_fb_create_handle to match drm_gem_fb_funcs. - I don't know why qxl_fb_find_or_create_single used to check for an existing framebuffer and removed that check to match other drivers. - Use of drm_fb_helper_fbdev_teardown also requires "info->fbdefio" to be dynamically allocated. Replace the existing defio config by drm_fb_helper_defio_init to accomodate this. Testing results: startx with fbdev, modesetting and qxl all seems to work. Tested also with CONFIG_DRM_FBDEV_EMULATION=n, fbdev obviously fails but others are fine. QEMU -spice and QEMU -spice with vdagent and multiple (resized) displays (via remote-viewer) also works. unbind vtconsole and rmmod has *not* regressed (i.e. it still trips on a use-after-free in qxl_check_idle via qxl_ttm_fini). Ideally setup/teardown is replaced by drm_fbdev_generic_setup as that would result in further code reduction, improve error handling (like not leaking shadow memory), but unfortunately QXL has no implementation for qxl_gem_prime_vmap. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Link: http://patchwork.freedesktop.org/patch/msgid/20180910132156.23201-1-peter@lekensteyn.nl Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-09-10 20:21:56 +07:00
.create_handle = drm_gem_fb_create_handle,
};
static void qxl_crtc_atomic_enable(struct drm_crtc *crtc,
struct drm_crtc_state *old_state)
{
qxl_crtc_update_monitors_config(crtc, "enable");
}
static void qxl_crtc_atomic_disable(struct drm_crtc *crtc,
struct drm_crtc_state *old_state)
{
qxl_crtc_update_monitors_config(crtc, "disable");
}
static const struct drm_crtc_helper_funcs qxl_crtc_helper_funcs = {
.atomic_flush = qxl_crtc_atomic_flush,
.atomic_enable = qxl_crtc_atomic_enable,
.atomic_disable = qxl_crtc_atomic_disable,
};
static int qxl_primary_atomic_check(struct drm_plane *plane,
struct drm_plane_state *state)
{
struct qxl_device *qdev = plane->dev->dev_private;
struct qxl_bo *bo;
if (!state->crtc || !state->fb)
return 0;
qxl: refactor to use drm_fb_helper_fbdev_setup Lots of code can be removed by relying on fb-helper: - "struct drm_framebuffer" moves to fb_helper.fb. - "struct drm_gem_object" moves to fb_helper.obj[0]. - "struct qxl_device" can be inferred as drm_fb_helper is embedded. - qxl_user_framebuffer_create -> drm_gem_fb_create. - qxl_user_framebuffer_destroy -> drm_gem_fb_destroy. - qxl_fbdev_destroy -> drm_fb_helper_fbdev_teardown + vfree(shadow). Remove unused code: - qxl_fbdev_qobj_is_fb, qxl_fbdev_set_suspend. - Unused fields of qxl_fbdev: delayed_ops, delayed_ops_lock, size. Misc notes: - The dirty callback is preserved as it is necessary to trigger update commands in the hw (the screen stays black otherwise). - No idea when .create_handle in drm_framebuffer_funcs is used, but use the same drm_gem_fb_create_handle to match drm_gem_fb_funcs. - I don't know why qxl_fb_find_or_create_single used to check for an existing framebuffer and removed that check to match other drivers. - Use of drm_fb_helper_fbdev_teardown also requires "info->fbdefio" to be dynamically allocated. Replace the existing defio config by drm_fb_helper_defio_init to accomodate this. Testing results: startx with fbdev, modesetting and qxl all seems to work. Tested also with CONFIG_DRM_FBDEV_EMULATION=n, fbdev obviously fails but others are fine. QEMU -spice and QEMU -spice with vdagent and multiple (resized) displays (via remote-viewer) also works. unbind vtconsole and rmmod has *not* regressed (i.e. it still trips on a use-after-free in qxl_check_idle via qxl_ttm_fini). Ideally setup/teardown is replaced by drm_fbdev_generic_setup as that would result in further code reduction, improve error handling (like not leaking shadow memory), but unfortunately QXL has no implementation for qxl_gem_prime_vmap. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Link: http://patchwork.freedesktop.org/patch/msgid/20180910132156.23201-1-peter@lekensteyn.nl Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-09-10 20:21:56 +07:00
bo = gem_to_qxl_bo(state->fb->obj[0]);
return qxl_check_framebuffer(qdev, bo);
}
static int qxl_primary_apply_cursor(struct drm_plane *plane)
{
struct drm_device *dev = plane->dev;
struct qxl_device *qdev = dev->dev_private;
struct drm_framebuffer *fb = plane->state->fb;
struct qxl_crtc *qcrtc = to_qxl_crtc(plane->state->crtc);
struct qxl_cursor_cmd *cmd;
struct qxl_release *release;
int ret = 0;
if (!qcrtc->cursor_bo)
return 0;
ret = qxl_alloc_release_reserved(qdev, sizeof(*cmd),
QXL_RELEASE_CURSOR_CMD,
&release, NULL);
if (ret)
return ret;
ret = qxl_release_list_add(release, qcrtc->cursor_bo);
if (ret)
goto out_free_release;
ret = qxl_release_reserve_list(release, false);
if (ret)
goto out_free_release;
cmd = (struct qxl_cursor_cmd *)qxl_release_map(qdev, release);
cmd->type = QXL_CURSOR_SET;
cmd->u.set.position.x = plane->state->crtc_x + fb->hot_x;
cmd->u.set.position.y = plane->state->crtc_y + fb->hot_y;
cmd->u.set.shape = qxl_bo_physical_address(qdev, qcrtc->cursor_bo, 0);
cmd->u.set.visible = 1;
qxl_release_unmap(qdev, release, &cmd->release_info);
qxl_push_cursor_ring_release(qdev, release, QXL_CMD_CURSOR, false);
qxl_release_fence_buffer_objects(release);
return ret;
out_free_release:
qxl_release_free(qdev, release);
return ret;
}
static void qxl_primary_atomic_update(struct drm_plane *plane,
struct drm_plane_state *old_state)
{
struct qxl_device *qdev = plane->dev->dev_private;
qxl: refactor to use drm_fb_helper_fbdev_setup Lots of code can be removed by relying on fb-helper: - "struct drm_framebuffer" moves to fb_helper.fb. - "struct drm_gem_object" moves to fb_helper.obj[0]. - "struct qxl_device" can be inferred as drm_fb_helper is embedded. - qxl_user_framebuffer_create -> drm_gem_fb_create. - qxl_user_framebuffer_destroy -> drm_gem_fb_destroy. - qxl_fbdev_destroy -> drm_fb_helper_fbdev_teardown + vfree(shadow). Remove unused code: - qxl_fbdev_qobj_is_fb, qxl_fbdev_set_suspend. - Unused fields of qxl_fbdev: delayed_ops, delayed_ops_lock, size. Misc notes: - The dirty callback is preserved as it is necessary to trigger update commands in the hw (the screen stays black otherwise). - No idea when .create_handle in drm_framebuffer_funcs is used, but use the same drm_gem_fb_create_handle to match drm_gem_fb_funcs. - I don't know why qxl_fb_find_or_create_single used to check for an existing framebuffer and removed that check to match other drivers. - Use of drm_fb_helper_fbdev_teardown also requires "info->fbdefio" to be dynamically allocated. Replace the existing defio config by drm_fb_helper_defio_init to accomodate this. Testing results: startx with fbdev, modesetting and qxl all seems to work. Tested also with CONFIG_DRM_FBDEV_EMULATION=n, fbdev obviously fails but others are fine. QEMU -spice and QEMU -spice with vdagent and multiple (resized) displays (via remote-viewer) also works. unbind vtconsole and rmmod has *not* regressed (i.e. it still trips on a use-after-free in qxl_check_idle via qxl_ttm_fini). Ideally setup/teardown is replaced by drm_fbdev_generic_setup as that would result in further code reduction, improve error handling (like not leaking shadow memory), but unfortunately QXL has no implementation for qxl_gem_prime_vmap. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Link: http://patchwork.freedesktop.org/patch/msgid/20180910132156.23201-1-peter@lekensteyn.nl Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-09-10 20:21:56 +07:00
struct qxl_bo *bo = gem_to_qxl_bo(plane->state->fb->obj[0]);
struct qxl_bo *primary;
struct drm_clip_rect norect = {
.x1 = 0,
.y1 = 0,
qxl: refactor to use drm_fb_helper_fbdev_setup Lots of code can be removed by relying on fb-helper: - "struct drm_framebuffer" moves to fb_helper.fb. - "struct drm_gem_object" moves to fb_helper.obj[0]. - "struct qxl_device" can be inferred as drm_fb_helper is embedded. - qxl_user_framebuffer_create -> drm_gem_fb_create. - qxl_user_framebuffer_destroy -> drm_gem_fb_destroy. - qxl_fbdev_destroy -> drm_fb_helper_fbdev_teardown + vfree(shadow). Remove unused code: - qxl_fbdev_qobj_is_fb, qxl_fbdev_set_suspend. - Unused fields of qxl_fbdev: delayed_ops, delayed_ops_lock, size. Misc notes: - The dirty callback is preserved as it is necessary to trigger update commands in the hw (the screen stays black otherwise). - No idea when .create_handle in drm_framebuffer_funcs is used, but use the same drm_gem_fb_create_handle to match drm_gem_fb_funcs. - I don't know why qxl_fb_find_or_create_single used to check for an existing framebuffer and removed that check to match other drivers. - Use of drm_fb_helper_fbdev_teardown also requires "info->fbdefio" to be dynamically allocated. Replace the existing defio config by drm_fb_helper_defio_init to accomodate this. Testing results: startx with fbdev, modesetting and qxl all seems to work. Tested also with CONFIG_DRM_FBDEV_EMULATION=n, fbdev obviously fails but others are fine. QEMU -spice and QEMU -spice with vdagent and multiple (resized) displays (via remote-viewer) also works. unbind vtconsole and rmmod has *not* regressed (i.e. it still trips on a use-after-free in qxl_check_idle via qxl_ttm_fini). Ideally setup/teardown is replaced by drm_fbdev_generic_setup as that would result in further code reduction, improve error handling (like not leaking shadow memory), but unfortunately QXL has no implementation for qxl_gem_prime_vmap. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Link: http://patchwork.freedesktop.org/patch/msgid/20180910132156.23201-1-peter@lekensteyn.nl Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-09-10 20:21:56 +07:00
.x2 = plane->state->fb->width,
.y2 = plane->state->fb->height
};
uint32_t dumb_shadow_offset = 0;
primary = bo->shadow ? bo->shadow : bo;
if (!primary->is_primary) {
if (qdev->primary_bo)
qxl_io_destroy_primary(qdev);
qxl_io_create_primary(qdev, primary);
qxl_primary_apply_cursor(plane);
}
if (bo->is_dumb)
dumb_shadow_offset =
qdev->dumb_heads[plane->state->crtc->index].x;
qxl_draw_dirty_fb(qdev, plane->state->fb, bo, 0, 0, &norect, 1, 1,
dumb_shadow_offset);
}
static void qxl_primary_atomic_disable(struct drm_plane *plane,
struct drm_plane_state *old_state)
{
struct qxl_device *qdev = plane->dev->dev_private;
if (old_state->fb) {
qxl: refactor to use drm_fb_helper_fbdev_setup Lots of code can be removed by relying on fb-helper: - "struct drm_framebuffer" moves to fb_helper.fb. - "struct drm_gem_object" moves to fb_helper.obj[0]. - "struct qxl_device" can be inferred as drm_fb_helper is embedded. - qxl_user_framebuffer_create -> drm_gem_fb_create. - qxl_user_framebuffer_destroy -> drm_gem_fb_destroy. - qxl_fbdev_destroy -> drm_fb_helper_fbdev_teardown + vfree(shadow). Remove unused code: - qxl_fbdev_qobj_is_fb, qxl_fbdev_set_suspend. - Unused fields of qxl_fbdev: delayed_ops, delayed_ops_lock, size. Misc notes: - The dirty callback is preserved as it is necessary to trigger update commands in the hw (the screen stays black otherwise). - No idea when .create_handle in drm_framebuffer_funcs is used, but use the same drm_gem_fb_create_handle to match drm_gem_fb_funcs. - I don't know why qxl_fb_find_or_create_single used to check for an existing framebuffer and removed that check to match other drivers. - Use of drm_fb_helper_fbdev_teardown also requires "info->fbdefio" to be dynamically allocated. Replace the existing defio config by drm_fb_helper_defio_init to accomodate this. Testing results: startx with fbdev, modesetting and qxl all seems to work. Tested also with CONFIG_DRM_FBDEV_EMULATION=n, fbdev obviously fails but others are fine. QEMU -spice and QEMU -spice with vdagent and multiple (resized) displays (via remote-viewer) also works. unbind vtconsole and rmmod has *not* regressed (i.e. it still trips on a use-after-free in qxl_check_idle via qxl_ttm_fini). Ideally setup/teardown is replaced by drm_fbdev_generic_setup as that would result in further code reduction, improve error handling (like not leaking shadow memory), but unfortunately QXL has no implementation for qxl_gem_prime_vmap. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Link: http://patchwork.freedesktop.org/patch/msgid/20180910132156.23201-1-peter@lekensteyn.nl Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-09-10 20:21:56 +07:00
struct qxl_bo *bo = gem_to_qxl_bo(old_state->fb->obj[0]);
if (bo->is_primary) {
qxl_io_destroy_primary(qdev);
bo->is_primary = false;
}
}
}
static void qxl_cursor_atomic_update(struct drm_plane *plane,
struct drm_plane_state *old_state)
{
struct drm_device *dev = plane->dev;
struct qxl_device *qdev = dev->dev_private;
struct drm_framebuffer *fb = plane->state->fb;
struct qxl_crtc *qcrtc = to_qxl_crtc(plane->state->crtc);
struct qxl_release *release;
struct qxl_cursor_cmd *cmd;
struct qxl_cursor *cursor;
struct drm_gem_object *obj;
struct qxl_bo *cursor_bo = NULL, *user_bo = NULL, *old_cursor_bo = NULL;
int ret;
void *user_ptr;
int size = 64*64*4;
ret = qxl_alloc_release_reserved(qdev, sizeof(*cmd),
QXL_RELEASE_CURSOR_CMD,
&release, NULL);
if (ret)
return;
if (fb != old_state->fb) {
qxl: refactor to use drm_fb_helper_fbdev_setup Lots of code can be removed by relying on fb-helper: - "struct drm_framebuffer" moves to fb_helper.fb. - "struct drm_gem_object" moves to fb_helper.obj[0]. - "struct qxl_device" can be inferred as drm_fb_helper is embedded. - qxl_user_framebuffer_create -> drm_gem_fb_create. - qxl_user_framebuffer_destroy -> drm_gem_fb_destroy. - qxl_fbdev_destroy -> drm_fb_helper_fbdev_teardown + vfree(shadow). Remove unused code: - qxl_fbdev_qobj_is_fb, qxl_fbdev_set_suspend. - Unused fields of qxl_fbdev: delayed_ops, delayed_ops_lock, size. Misc notes: - The dirty callback is preserved as it is necessary to trigger update commands in the hw (the screen stays black otherwise). - No idea when .create_handle in drm_framebuffer_funcs is used, but use the same drm_gem_fb_create_handle to match drm_gem_fb_funcs. - I don't know why qxl_fb_find_or_create_single used to check for an existing framebuffer and removed that check to match other drivers. - Use of drm_fb_helper_fbdev_teardown also requires "info->fbdefio" to be dynamically allocated. Replace the existing defio config by drm_fb_helper_defio_init to accomodate this. Testing results: startx with fbdev, modesetting and qxl all seems to work. Tested also with CONFIG_DRM_FBDEV_EMULATION=n, fbdev obviously fails but others are fine. QEMU -spice and QEMU -spice with vdagent and multiple (resized) displays (via remote-viewer) also works. unbind vtconsole and rmmod has *not* regressed (i.e. it still trips on a use-after-free in qxl_check_idle via qxl_ttm_fini). Ideally setup/teardown is replaced by drm_fbdev_generic_setup as that would result in further code reduction, improve error handling (like not leaking shadow memory), but unfortunately QXL has no implementation for qxl_gem_prime_vmap. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Link: http://patchwork.freedesktop.org/patch/msgid/20180910132156.23201-1-peter@lekensteyn.nl Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-09-10 20:21:56 +07:00
obj = fb->obj[0];
user_bo = gem_to_qxl_bo(obj);
/* pinning is done in the prepare/cleanup framevbuffer */
ret = qxl_bo_kmap(user_bo, &user_ptr);
if (ret)
goto out_free_release;
ret = qxl_alloc_bo_reserved(qdev, release,
sizeof(struct qxl_cursor) + size,
&cursor_bo);
if (ret)
goto out_kunmap;
ret = qxl_bo_pin(cursor_bo);
if (ret)
goto out_free_bo;
ret = qxl_release_reserve_list(release, true);
if (ret)
goto out_unpin;
ret = qxl_bo_kmap(cursor_bo, (void **)&cursor);
if (ret)
goto out_backoff;
cursor->header.unique = 0;
cursor->header.type = SPICE_CURSOR_TYPE_ALPHA;
cursor->header.width = 64;
cursor->header.height = 64;
cursor->header.hot_spot_x = fb->hot_x;
cursor->header.hot_spot_y = fb->hot_y;
cursor->data_size = size;
cursor->chunk.next_chunk = 0;
cursor->chunk.prev_chunk = 0;
cursor->chunk.data_size = size;
memcpy(cursor->chunk.data, user_ptr, size);
qxl_bo_kunmap(cursor_bo);
qxl_bo_kunmap(user_bo);
drm: qxl: Delay entering atomic context during cursor update qxl_release_map will enter an atomic context, but since we still need to alloc memory for BOs, we better delay that until we have everything we need, in case we need to sleep inside the allocation. This avoids the Sleep in atomic state below, which was reported by Mike. [ 43.910362] BUG: sleeping function called from invalid context at mm/slab.h:432 [ 43.910955] in_atomic(): 1, irqs_disabled(): 0, pid: 2077, name: Xorg [ 43.911472] Preemption disabled at: [ 43.911478] [<ffffffffa02b1c45>] qxl_bo_kmap_atomic_page+0xa5/0x100 [qxl] [ 43.912103] CPU: 0 PID: 2077 Comm: Xorg Tainted: G E 4.12.0-master #38 [ 43.912550] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20161202_174313-build11a 04/01/2014 [ 43.913202] Call Trace: [ 43.913371] dump_stack+0x65/0x89 [ 43.913581] ? qxl_bo_kmap_atomic_page+0xa5/0x100 [qxl] [ 43.913876] ___might_sleep+0x11a/0x190 [ 43.914095] __might_sleep+0x4a/0x80 [ 43.914319] ? qxl_bo_create+0x50/0x190 [qxl] [ 43.914565] kmem_cache_alloc_trace+0x46/0x180 [ 43.914836] qxl_bo_create+0x50/0x190 [qxl] [ 43.915082] ? refcount_dec_and_test+0x11/0x20 [ 43.915332] ? ttm_mem_io_reserve+0x41/0xe0 [ttm] [ 43.915595] qxl_alloc_bo_reserved+0x37/0xb0 [qxl] [ 43.915884] qxl_cursor_atomic_update+0x8f/0x260 [qxl] [ 43.916172] ? drm_atomic_helper_update_legacy_modeset_state+0x1d6/0x210 [drm_kms_helper] [ 43.916623] drm_atomic_helper_commit_planes+0xec/0x230 [drm_kms_helper] [ 43.916995] drm_atomic_helper_commit_tail+0x2b/0x60 [drm_kms_helper] [ 43.917398] commit_tail+0x65/0x70 [drm_kms_helper] [ 43.917693] drm_atomic_helper_commit+0xa9/0x100 [drm_kms_helper] [ 43.918039] drm_atomic_commit+0x4b/0x50 [drm] [ 43.918334] drm_atomic_helper_update_plane+0xf1/0x110 [drm_kms_helper] [ 43.918902] __setplane_internal+0x19f/0x280 [drm] [ 43.919240] drm_mode_cursor_universal+0x101/0x1c0 [drm] [ 43.919541] drm_mode_cursor_common+0x15b/0x1d0 [drm] [ 43.919858] drm_mode_cursor2_ioctl+0xe/0x10 [drm] [ 43.920157] drm_ioctl+0x211/0x460 [drm] [ 43.920383] ? drm_mode_cursor_ioctl+0x50/0x50 [drm] [ 43.920664] ? handle_mm_fault+0x93/0x160 [ 43.920893] do_vfs_ioctl+0x96/0x6e0 [ 43.921117] ? __fget+0x73/0xa0 [ 43.921322] SyS_ioctl+0x41/0x70 [ 43.921545] entry_SYSCALL_64_fastpath+0x1a/0xa5 [ 43.922188] RIP: 0033:0x7f1145804bc7 [ 43.922526] RSP: 002b:00007ffcd3e50508 EFLAGS: 00003246 ORIG_RAX: 0000000000000010 [ 43.923367] RAX: ffffffffffffffda RBX: 0000000000000040 RCX: 00007f1145804bc7 [ 43.923852] RDX: 00007ffcd3e50540 RSI: 00000000c02464bb RDI: 000000000000000b [ 43.924299] RBP: 0000000000000040 R08: 0000000000000040 R09: 000000000000000c [ 43.924694] R10: 00007ffcd3e50340 R11: 0000000000003246 R12: 0000000000000018 [ 43.925128] R13: 00000000022bc390 R14: 0000000000000040 R15: 00007ffcd3e5062c Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170519175819.15682-1-krisman@collabora.co.uk Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-05-20 00:58:19 +07:00
cmd = (struct qxl_cursor_cmd *) qxl_release_map(qdev, release);
cmd->u.set.visible = 1;
cmd->u.set.shape = qxl_bo_physical_address(qdev,
cursor_bo, 0);
cmd->type = QXL_CURSOR_SET;
old_cursor_bo = qcrtc->cursor_bo;
qcrtc->cursor_bo = cursor_bo;
cursor_bo = NULL;
} else {
ret = qxl_release_reserve_list(release, true);
if (ret)
goto out_free_release;
drm: qxl: Delay entering atomic context during cursor update qxl_release_map will enter an atomic context, but since we still need to alloc memory for BOs, we better delay that until we have everything we need, in case we need to sleep inside the allocation. This avoids the Sleep in atomic state below, which was reported by Mike. [ 43.910362] BUG: sleeping function called from invalid context at mm/slab.h:432 [ 43.910955] in_atomic(): 1, irqs_disabled(): 0, pid: 2077, name: Xorg [ 43.911472] Preemption disabled at: [ 43.911478] [<ffffffffa02b1c45>] qxl_bo_kmap_atomic_page+0xa5/0x100 [qxl] [ 43.912103] CPU: 0 PID: 2077 Comm: Xorg Tainted: G E 4.12.0-master #38 [ 43.912550] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20161202_174313-build11a 04/01/2014 [ 43.913202] Call Trace: [ 43.913371] dump_stack+0x65/0x89 [ 43.913581] ? qxl_bo_kmap_atomic_page+0xa5/0x100 [qxl] [ 43.913876] ___might_sleep+0x11a/0x190 [ 43.914095] __might_sleep+0x4a/0x80 [ 43.914319] ? qxl_bo_create+0x50/0x190 [qxl] [ 43.914565] kmem_cache_alloc_trace+0x46/0x180 [ 43.914836] qxl_bo_create+0x50/0x190 [qxl] [ 43.915082] ? refcount_dec_and_test+0x11/0x20 [ 43.915332] ? ttm_mem_io_reserve+0x41/0xe0 [ttm] [ 43.915595] qxl_alloc_bo_reserved+0x37/0xb0 [qxl] [ 43.915884] qxl_cursor_atomic_update+0x8f/0x260 [qxl] [ 43.916172] ? drm_atomic_helper_update_legacy_modeset_state+0x1d6/0x210 [drm_kms_helper] [ 43.916623] drm_atomic_helper_commit_planes+0xec/0x230 [drm_kms_helper] [ 43.916995] drm_atomic_helper_commit_tail+0x2b/0x60 [drm_kms_helper] [ 43.917398] commit_tail+0x65/0x70 [drm_kms_helper] [ 43.917693] drm_atomic_helper_commit+0xa9/0x100 [drm_kms_helper] [ 43.918039] drm_atomic_commit+0x4b/0x50 [drm] [ 43.918334] drm_atomic_helper_update_plane+0xf1/0x110 [drm_kms_helper] [ 43.918902] __setplane_internal+0x19f/0x280 [drm] [ 43.919240] drm_mode_cursor_universal+0x101/0x1c0 [drm] [ 43.919541] drm_mode_cursor_common+0x15b/0x1d0 [drm] [ 43.919858] drm_mode_cursor2_ioctl+0xe/0x10 [drm] [ 43.920157] drm_ioctl+0x211/0x460 [drm] [ 43.920383] ? drm_mode_cursor_ioctl+0x50/0x50 [drm] [ 43.920664] ? handle_mm_fault+0x93/0x160 [ 43.920893] do_vfs_ioctl+0x96/0x6e0 [ 43.921117] ? __fget+0x73/0xa0 [ 43.921322] SyS_ioctl+0x41/0x70 [ 43.921545] entry_SYSCALL_64_fastpath+0x1a/0xa5 [ 43.922188] RIP: 0033:0x7f1145804bc7 [ 43.922526] RSP: 002b:00007ffcd3e50508 EFLAGS: 00003246 ORIG_RAX: 0000000000000010 [ 43.923367] RAX: ffffffffffffffda RBX: 0000000000000040 RCX: 00007f1145804bc7 [ 43.923852] RDX: 00007ffcd3e50540 RSI: 00000000c02464bb RDI: 000000000000000b [ 43.924299] RBP: 0000000000000040 R08: 0000000000000040 R09: 000000000000000c [ 43.924694] R10: 00007ffcd3e50340 R11: 0000000000003246 R12: 0000000000000018 [ 43.925128] R13: 00000000022bc390 R14: 0000000000000040 R15: 00007ffcd3e5062c Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170519175819.15682-1-krisman@collabora.co.uk Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-05-20 00:58:19 +07:00
cmd = (struct qxl_cursor_cmd *) qxl_release_map(qdev, release);
cmd->type = QXL_CURSOR_MOVE;
}
cmd->u.position.x = plane->state->crtc_x + fb->hot_x;
cmd->u.position.y = plane->state->crtc_y + fb->hot_y;
qxl_release_unmap(qdev, release, &cmd->release_info);
qxl_push_cursor_ring_release(qdev, release, QXL_CMD_CURSOR, false);
qxl_release_fence_buffer_objects(release);
if (old_cursor_bo != NULL)
qxl_bo_unpin(old_cursor_bo);
qxl_bo_unref(&old_cursor_bo);
qxl_bo_unref(&cursor_bo);
return;
out_backoff:
qxl_release_backoff_reserve_list(release);
out_unpin:
qxl_bo_unpin(cursor_bo);
out_free_bo:
qxl_bo_unref(&cursor_bo);
out_kunmap:
qxl_bo_kunmap(user_bo);
out_free_release:
qxl_release_free(qdev, release);
return;
}
static void qxl_cursor_atomic_disable(struct drm_plane *plane,
struct drm_plane_state *old_state)
{
struct qxl_device *qdev = plane->dev->dev_private;
struct qxl_release *release;
struct qxl_cursor_cmd *cmd;
int ret;
ret = qxl_alloc_release_reserved(qdev, sizeof(*cmd),
QXL_RELEASE_CURSOR_CMD,
&release, NULL);
if (ret)
return;
ret = qxl_release_reserve_list(release, true);
if (ret) {
qxl_release_free(qdev, release);
return;
}
cmd = (struct qxl_cursor_cmd *)qxl_release_map(qdev, release);
cmd->type = QXL_CURSOR_HIDE;
qxl_release_unmap(qdev, release, &cmd->release_info);
qxl_push_cursor_ring_release(qdev, release, QXL_CMD_CURSOR, false);
qxl_release_fence_buffer_objects(release);
}
static void qxl_update_dumb_head(struct qxl_device *qdev,
int index, struct qxl_bo *bo)
{
uint32_t width, height;
if (index >= qdev->monitors_config->max_allowed)
return;
if (bo && bo->is_dumb) {
width = bo->surf.width;
height = bo->surf.height;
} else {
width = 0;
height = 0;
}
if (qdev->dumb_heads[index].width == width &&
qdev->dumb_heads[index].height == height)
return;
DRM_DEBUG("#%d: %dx%d -> %dx%d\n", index,
qdev->dumb_heads[index].width,
qdev->dumb_heads[index].height,
width, height);
qdev->dumb_heads[index].width = width;
qdev->dumb_heads[index].height = height;
}
static void qxl_calc_dumb_shadow(struct qxl_device *qdev,
struct qxl_surface *surf)
{
struct qxl_head *head;
int i;
memset(surf, 0, sizeof(*surf));
for (i = 0; i < qdev->monitors_config->max_allowed; i++) {
head = qdev->dumb_heads + i;
head->x = surf->width;
surf->width += head->width;
if (surf->height < head->height)
surf->height = head->height;
}
if (surf->width < 64)
surf->width = 64;
if (surf->height < 64)
surf->height = 64;
surf->format = SPICE_SURFACE_FMT_32_xRGB;
surf->stride = surf->width * 4;
if (!qdev->dumb_shadow_bo ||
qdev->dumb_shadow_bo->surf.width != surf->width ||
qdev->dumb_shadow_bo->surf.height != surf->height)
DRM_DEBUG("%dx%d\n", surf->width, surf->height);
}
static int qxl_plane_prepare_fb(struct drm_plane *plane,
struct drm_plane_state *new_state)
{
struct qxl_device *qdev = plane->dev->dev_private;
struct drm_gem_object *obj;
struct qxl_bo *user_bo;
struct qxl_surface surf;
int ret;
if (!new_state->fb)
return 0;
qxl: refactor to use drm_fb_helper_fbdev_setup Lots of code can be removed by relying on fb-helper: - "struct drm_framebuffer" moves to fb_helper.fb. - "struct drm_gem_object" moves to fb_helper.obj[0]. - "struct qxl_device" can be inferred as drm_fb_helper is embedded. - qxl_user_framebuffer_create -> drm_gem_fb_create. - qxl_user_framebuffer_destroy -> drm_gem_fb_destroy. - qxl_fbdev_destroy -> drm_fb_helper_fbdev_teardown + vfree(shadow). Remove unused code: - qxl_fbdev_qobj_is_fb, qxl_fbdev_set_suspend. - Unused fields of qxl_fbdev: delayed_ops, delayed_ops_lock, size. Misc notes: - The dirty callback is preserved as it is necessary to trigger update commands in the hw (the screen stays black otherwise). - No idea when .create_handle in drm_framebuffer_funcs is used, but use the same drm_gem_fb_create_handle to match drm_gem_fb_funcs. - I don't know why qxl_fb_find_or_create_single used to check for an existing framebuffer and removed that check to match other drivers. - Use of drm_fb_helper_fbdev_teardown also requires "info->fbdefio" to be dynamically allocated. Replace the existing defio config by drm_fb_helper_defio_init to accomodate this. Testing results: startx with fbdev, modesetting and qxl all seems to work. Tested also with CONFIG_DRM_FBDEV_EMULATION=n, fbdev obviously fails but others are fine. QEMU -spice and QEMU -spice with vdagent and multiple (resized) displays (via remote-viewer) also works. unbind vtconsole and rmmod has *not* regressed (i.e. it still trips on a use-after-free in qxl_check_idle via qxl_ttm_fini). Ideally setup/teardown is replaced by drm_fbdev_generic_setup as that would result in further code reduction, improve error handling (like not leaking shadow memory), but unfortunately QXL has no implementation for qxl_gem_prime_vmap. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Link: http://patchwork.freedesktop.org/patch/msgid/20180910132156.23201-1-peter@lekensteyn.nl Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-09-10 20:21:56 +07:00
obj = new_state->fb->obj[0];
user_bo = gem_to_qxl_bo(obj);
if (plane->type == DRM_PLANE_TYPE_PRIMARY &&
user_bo->is_dumb) {
qxl_update_dumb_head(qdev, new_state->crtc->index,
user_bo);
qxl_calc_dumb_shadow(qdev, &surf);
if (!qdev->dumb_shadow_bo ||
qdev->dumb_shadow_bo->surf.width != surf.width ||
qdev->dumb_shadow_bo->surf.height != surf.height) {
if (qdev->dumb_shadow_bo) {
drm_gem_object_put_unlocked
(&qdev->dumb_shadow_bo->gem_base);
qdev->dumb_shadow_bo = NULL;
}
qxl_bo_create(qdev, surf.height * surf.stride,
true, true, QXL_GEM_DOMAIN_SURFACE, &surf,
&qdev->dumb_shadow_bo);
}
if (user_bo->shadow != qdev->dumb_shadow_bo) {
if (user_bo->shadow) {
drm_gem_object_put_unlocked
(&user_bo->shadow->gem_base);
user_bo->shadow = NULL;
}
drm_gem_object_get(&qdev->dumb_shadow_bo->gem_base);
user_bo->shadow = qdev->dumb_shadow_bo;
}
}
ret = qxl_bo_pin(user_bo);
if (ret)
return ret;
return 0;
}
static void qxl_plane_cleanup_fb(struct drm_plane *plane,
struct drm_plane_state *old_state)
{
struct drm_gem_object *obj;
struct qxl_bo *user_bo;
if (!old_state->fb) {
/*
* we never executed prepare_fb, so there's nothing to
* unpin.
*/
return;
}
qxl: refactor to use drm_fb_helper_fbdev_setup Lots of code can be removed by relying on fb-helper: - "struct drm_framebuffer" moves to fb_helper.fb. - "struct drm_gem_object" moves to fb_helper.obj[0]. - "struct qxl_device" can be inferred as drm_fb_helper is embedded. - qxl_user_framebuffer_create -> drm_gem_fb_create. - qxl_user_framebuffer_destroy -> drm_gem_fb_destroy. - qxl_fbdev_destroy -> drm_fb_helper_fbdev_teardown + vfree(shadow). Remove unused code: - qxl_fbdev_qobj_is_fb, qxl_fbdev_set_suspend. - Unused fields of qxl_fbdev: delayed_ops, delayed_ops_lock, size. Misc notes: - The dirty callback is preserved as it is necessary to trigger update commands in the hw (the screen stays black otherwise). - No idea when .create_handle in drm_framebuffer_funcs is used, but use the same drm_gem_fb_create_handle to match drm_gem_fb_funcs. - I don't know why qxl_fb_find_or_create_single used to check for an existing framebuffer and removed that check to match other drivers. - Use of drm_fb_helper_fbdev_teardown also requires "info->fbdefio" to be dynamically allocated. Replace the existing defio config by drm_fb_helper_defio_init to accomodate this. Testing results: startx with fbdev, modesetting and qxl all seems to work. Tested also with CONFIG_DRM_FBDEV_EMULATION=n, fbdev obviously fails but others are fine. QEMU -spice and QEMU -spice with vdagent and multiple (resized) displays (via remote-viewer) also works. unbind vtconsole and rmmod has *not* regressed (i.e. it still trips on a use-after-free in qxl_check_idle via qxl_ttm_fini). Ideally setup/teardown is replaced by drm_fbdev_generic_setup as that would result in further code reduction, improve error handling (like not leaking shadow memory), but unfortunately QXL has no implementation for qxl_gem_prime_vmap. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Link: http://patchwork.freedesktop.org/patch/msgid/20180910132156.23201-1-peter@lekensteyn.nl Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-09-10 20:21:56 +07:00
obj = old_state->fb->obj[0];
user_bo = gem_to_qxl_bo(obj);
qxl_bo_unpin(user_bo);
if (old_state->fb != plane->state->fb && user_bo->shadow) {
drm_gem_object_put_unlocked(&user_bo->shadow->gem_base);
user_bo->shadow = NULL;
}
}
static const uint32_t qxl_cursor_plane_formats[] = {
DRM_FORMAT_ARGB8888,
};
static const struct drm_plane_helper_funcs qxl_cursor_helper_funcs = {
.atomic_update = qxl_cursor_atomic_update,
.atomic_disable = qxl_cursor_atomic_disable,
.prepare_fb = qxl_plane_prepare_fb,
.cleanup_fb = qxl_plane_cleanup_fb,
};
static const struct drm_plane_funcs qxl_cursor_plane_funcs = {
.update_plane = drm_atomic_helper_update_plane,
.disable_plane = drm_atomic_helper_disable_plane,
.destroy = drm_primary_helper_destroy,
.reset = drm_atomic_helper_plane_reset,
.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
};
static const uint32_t qxl_primary_plane_formats[] = {
DRM_FORMAT_XRGB8888,
DRM_FORMAT_ARGB8888,
};
static const struct drm_plane_helper_funcs primary_helper_funcs = {
.atomic_check = qxl_primary_atomic_check,
.atomic_update = qxl_primary_atomic_update,
.atomic_disable = qxl_primary_atomic_disable,
.prepare_fb = qxl_plane_prepare_fb,
.cleanup_fb = qxl_plane_cleanup_fb,
};
static const struct drm_plane_funcs qxl_primary_plane_funcs = {
.update_plane = drm_atomic_helper_update_plane,
.disable_plane = drm_atomic_helper_disable_plane,
.destroy = drm_primary_helper_destroy,
.reset = drm_atomic_helper_plane_reset,
.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
};
static struct drm_plane *qxl_create_plane(struct qxl_device *qdev,
unsigned int possible_crtcs,
enum drm_plane_type type)
{
const struct drm_plane_helper_funcs *helper_funcs = NULL;
struct drm_plane *plane;
const struct drm_plane_funcs *funcs;
const uint32_t *formats;
int num_formats;
int err;
if (type == DRM_PLANE_TYPE_PRIMARY) {
funcs = &qxl_primary_plane_funcs;
formats = qxl_primary_plane_formats;
num_formats = ARRAY_SIZE(qxl_primary_plane_formats);
helper_funcs = &primary_helper_funcs;
} else if (type == DRM_PLANE_TYPE_CURSOR) {
funcs = &qxl_cursor_plane_funcs;
formats = qxl_cursor_plane_formats;
helper_funcs = &qxl_cursor_helper_funcs;
num_formats = ARRAY_SIZE(qxl_cursor_plane_formats);
} else {
return ERR_PTR(-EINVAL);
}
plane = kzalloc(sizeof(*plane), GFP_KERNEL);
if (!plane)
return ERR_PTR(-ENOMEM);
err = drm_universal_plane_init(&qdev->ddev, plane, possible_crtcs,
funcs, formats, num_formats,
NULL, type, NULL);
if (err)
goto free_plane;
drm_plane_helper_add(plane, helper_funcs);
return plane;
free_plane:
kfree(plane);
return ERR_PTR(-EINVAL);
}
static int qdev_crtc_init(struct drm_device *dev, int crtc_id)
{
struct qxl_crtc *qxl_crtc;
struct drm_plane *primary, *cursor;
struct qxl_device *qdev = dev->dev_private;
int r;
qxl_crtc = kzalloc(sizeof(struct qxl_crtc), GFP_KERNEL);
if (!qxl_crtc)
return -ENOMEM;
primary = qxl_create_plane(qdev, 1 << crtc_id, DRM_PLANE_TYPE_PRIMARY);
if (IS_ERR(primary)) {
r = -ENOMEM;
goto free_mem;
}
cursor = qxl_create_plane(qdev, 1 << crtc_id, DRM_PLANE_TYPE_CURSOR);
if (IS_ERR(cursor)) {
r = -ENOMEM;
goto clean_primary;
}
r = drm_crtc_init_with_planes(dev, &qxl_crtc->base, primary, cursor,
&qxl_crtc_funcs, NULL);
if (r)
goto clean_cursor;
qxl_crtc->index = crtc_id;
drm_crtc_helper_add(&qxl_crtc->base, &qxl_crtc_helper_funcs);
return 0;
clean_cursor:
drm_plane_cleanup(cursor);
kfree(cursor);
clean_primary:
drm_plane_cleanup(primary);
kfree(primary);
free_mem:
kfree(qxl_crtc);
return r;
}
static int qxl_conn_get_modes(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct qxl_device *qdev = dev->dev_private;
struct qxl_output *output = drm_connector_to_qxl_output(connector);
unsigned int pwidth = 1024;
unsigned int pheight = 768;
int ret = 0;
if (qdev->client_monitors_config) {
struct qxl_head *head;
head = &qdev->client_monitors_config->heads[output->index];
if (head->width)
pwidth = head->width;
if (head->height)
pheight = head->height;
}
ret += drm_add_modes_noedid(connector, 8192, 8192);
ret += qxl_add_extra_modes(connector);
ret += qxl_add_monitors_config_modes(connector);
drm_set_preferred_mode(connector, pwidth, pheight);
return ret;
}
static enum drm_mode_status qxl_conn_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
struct drm_device *ddev = connector->dev;
struct qxl_device *qdev = ddev->dev_private;
if (qxl_check_mode(qdev, mode->hdisplay, mode->vdisplay) != 0)
return MODE_BAD;
return MODE_OK;
}
static struct drm_encoder *qxl_best_encoder(struct drm_connector *connector)
{
struct qxl_output *qxl_output =
drm_connector_to_qxl_output(connector);
DRM_DEBUG("\n");
return &qxl_output->enc;
}
static const struct drm_encoder_helper_funcs qxl_enc_helper_funcs = {
};
static const struct drm_connector_helper_funcs qxl_connector_helper_funcs = {
.get_modes = qxl_conn_get_modes,
.mode_valid = qxl_conn_mode_valid,
.best_encoder = qxl_best_encoder,
};
static enum drm_connector_status qxl_conn_detect(
struct drm_connector *connector,
bool force)
{
struct qxl_output *output =
drm_connector_to_qxl_output(connector);
struct drm_device *ddev = connector->dev;
struct qxl_device *qdev = ddev->dev_private;
bool connected = false;
/* The first monitor is always connected */
if (!qdev->client_monitors_config) {
if (output->index == 0)
connected = true;
} else
connected = qdev->client_monitors_config->count > output->index &&
qxl_head_enabled(&qdev->client_monitors_config->heads[output->index]);
DRM_DEBUG("#%d connected: %d\n", output->index, connected);
return connected ? connector_status_connected
: connector_status_disconnected;
}
static void qxl_conn_destroy(struct drm_connector *connector)
{
struct qxl_output *qxl_output =
drm_connector_to_qxl_output(connector);
drm_connector_unregister(connector);
drm_connector_cleanup(connector);
kfree(qxl_output);
}
static const struct drm_connector_funcs qxl_connector_funcs = {
.detect = qxl_conn_detect,
.fill_modes = drm_helper_probe_single_connector_modes,
.destroy = qxl_conn_destroy,
.reset = drm_atomic_helper_connector_reset,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
};
static void qxl_enc_destroy(struct drm_encoder *encoder)
{
drm_encoder_cleanup(encoder);
}
static const struct drm_encoder_funcs qxl_enc_funcs = {
.destroy = qxl_enc_destroy,
};
static int qxl_mode_create_hotplug_mode_update_property(struct qxl_device *qdev)
{
if (qdev->hotplug_mode_update_property)
return 0;
qdev->hotplug_mode_update_property =
drm_property_create_range(&qdev->ddev, DRM_MODE_PROP_IMMUTABLE,
"hotplug_mode_update", 0, 1);
return 0;
}
static int qdev_output_init(struct drm_device *dev, int num_output)
{
struct qxl_device *qdev = dev->dev_private;
struct qxl_output *qxl_output;
struct drm_connector *connector;
struct drm_encoder *encoder;
qxl_output = kzalloc(sizeof(struct qxl_output), GFP_KERNEL);
if (!qxl_output)
return -ENOMEM;
qxl_output->index = num_output;
connector = &qxl_output->base;
encoder = &qxl_output->enc;
drm_connector_init(dev, &qxl_output->base,
&qxl_connector_funcs, DRM_MODE_CONNECTOR_VIRTUAL);
drm_encoder_init(dev, &qxl_output->enc, &qxl_enc_funcs,
DRM_MODE_ENCODER_VIRTUAL, NULL);
/* we get HPD via client monitors config */
connector->polled = DRM_CONNECTOR_POLL_HPD;
encoder->possible_crtcs = 1 << num_output;
drm_connector_attach_encoder(&qxl_output->base,
&qxl_output->enc);
drm_encoder_helper_add(encoder, &qxl_enc_helper_funcs);
drm_connector_helper_add(connector, &qxl_connector_helper_funcs);
drm_object_attach_property(&connector->base,
qdev->hotplug_mode_update_property, 0);
drm_object_attach_property(&connector->base,
dev->mode_config.suggested_x_property, 0);
drm_object_attach_property(&connector->base,
dev->mode_config.suggested_y_property, 0);
return 0;
}
static struct drm_framebuffer *
qxl_user_framebuffer_create(struct drm_device *dev,
struct drm_file *file_priv,
const struct drm_mode_fb_cmd2 *mode_cmd)
{
qxl: refactor to use drm_fb_helper_fbdev_setup Lots of code can be removed by relying on fb-helper: - "struct drm_framebuffer" moves to fb_helper.fb. - "struct drm_gem_object" moves to fb_helper.obj[0]. - "struct qxl_device" can be inferred as drm_fb_helper is embedded. - qxl_user_framebuffer_create -> drm_gem_fb_create. - qxl_user_framebuffer_destroy -> drm_gem_fb_destroy. - qxl_fbdev_destroy -> drm_fb_helper_fbdev_teardown + vfree(shadow). Remove unused code: - qxl_fbdev_qobj_is_fb, qxl_fbdev_set_suspend. - Unused fields of qxl_fbdev: delayed_ops, delayed_ops_lock, size. Misc notes: - The dirty callback is preserved as it is necessary to trigger update commands in the hw (the screen stays black otherwise). - No idea when .create_handle in drm_framebuffer_funcs is used, but use the same drm_gem_fb_create_handle to match drm_gem_fb_funcs. - I don't know why qxl_fb_find_or_create_single used to check for an existing framebuffer and removed that check to match other drivers. - Use of drm_fb_helper_fbdev_teardown also requires "info->fbdefio" to be dynamically allocated. Replace the existing defio config by drm_fb_helper_defio_init to accomodate this. Testing results: startx with fbdev, modesetting and qxl all seems to work. Tested also with CONFIG_DRM_FBDEV_EMULATION=n, fbdev obviously fails but others are fine. QEMU -spice and QEMU -spice with vdagent and multiple (resized) displays (via remote-viewer) also works. unbind vtconsole and rmmod has *not* regressed (i.e. it still trips on a use-after-free in qxl_check_idle via qxl_ttm_fini). Ideally setup/teardown is replaced by drm_fbdev_generic_setup as that would result in further code reduction, improve error handling (like not leaking shadow memory), but unfortunately QXL has no implementation for qxl_gem_prime_vmap. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Link: http://patchwork.freedesktop.org/patch/msgid/20180910132156.23201-1-peter@lekensteyn.nl Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-09-10 20:21:56 +07:00
return drm_gem_fb_create_with_funcs(dev, file_priv, mode_cmd,
&qxl_fb_funcs);
}
static const struct drm_mode_config_funcs qxl_mode_funcs = {
.fb_create = qxl_user_framebuffer_create,
.atomic_check = drm_atomic_helper_check,
.atomic_commit = drm_atomic_helper_commit,
};
int qxl_create_monitors_object(struct qxl_device *qdev)
{
int ret;
struct drm_gem_object *gobj;
int monitors_config_size = sizeof(struct qxl_monitors_config) +
qxl_num_crtc * sizeof(struct qxl_head);
ret = qxl_gem_object_create(qdev, monitors_config_size, 0,
QXL_GEM_DOMAIN_VRAM,
false, false, NULL, &gobj);
if (ret) {
DRM_ERROR("%s: failed to create gem ret=%d\n", __func__, ret);
return -ENOMEM;
}
qdev->monitors_config_bo = gem_to_qxl_bo(gobj);
ret = qxl_bo_pin(qdev->monitors_config_bo);
if (ret)
return ret;
qxl_bo_kmap(qdev->monitors_config_bo, NULL);
qdev->monitors_config = qdev->monitors_config_bo->kptr;
qdev->ram_header->monitors_config =
qxl_bo_physical_address(qdev, qdev->monitors_config_bo, 0);
memset(qdev->monitors_config, 0, monitors_config_size);
qdev->dumb_heads = kcalloc(qxl_num_crtc, sizeof(qdev->dumb_heads[0]),
GFP_KERNEL);
if (!qdev->dumb_heads) {
qxl_destroy_monitors_object(qdev);
return -ENOMEM;
}
return 0;
}
int qxl_destroy_monitors_object(struct qxl_device *qdev)
{
int ret;
qdev->monitors_config = NULL;
qdev->ram_header->monitors_config = 0;
qxl_bo_kunmap(qdev->monitors_config_bo);
ret = qxl_bo_unpin(qdev->monitors_config_bo);
if (ret)
return ret;
qxl_bo_unref(&qdev->monitors_config_bo);
return 0;
}
int qxl_modeset_init(struct qxl_device *qdev)
{
int i;
int ret;
drm_mode_config_init(&qdev->ddev);
ret = qxl_create_monitors_object(qdev);
if (ret)
return ret;
qdev->ddev.mode_config.funcs = (void *)&qxl_mode_funcs;
/* modes will be validated against the framebuffer size */
qdev->ddev.mode_config.min_width = 0;
qdev->ddev.mode_config.min_height = 0;
qdev->ddev.mode_config.max_width = 8192;
qdev->ddev.mode_config.max_height = 8192;
qdev->ddev.mode_config.fb_base = qdev->vram_base;
drm_mode_create_suggested_offset_properties(&qdev->ddev);
qxl_mode_create_hotplug_mode_update_property(qdev);
for (i = 0 ; i < qxl_num_crtc; ++i) {
qdev_crtc_init(&qdev->ddev, i);
qdev_output_init(&qdev->ddev, i);
}
qxl_display_read_client_monitors_config(qdev);
drm_mode_config_reset(&qdev->ddev);
return 0;
}
void qxl_modeset_fini(struct qxl_device *qdev)
{
qxl_destroy_monitors_object(qdev);
qxl: refactor to use drm_fb_helper_fbdev_setup Lots of code can be removed by relying on fb-helper: - "struct drm_framebuffer" moves to fb_helper.fb. - "struct drm_gem_object" moves to fb_helper.obj[0]. - "struct qxl_device" can be inferred as drm_fb_helper is embedded. - qxl_user_framebuffer_create -> drm_gem_fb_create. - qxl_user_framebuffer_destroy -> drm_gem_fb_destroy. - qxl_fbdev_destroy -> drm_fb_helper_fbdev_teardown + vfree(shadow). Remove unused code: - qxl_fbdev_qobj_is_fb, qxl_fbdev_set_suspend. - Unused fields of qxl_fbdev: delayed_ops, delayed_ops_lock, size. Misc notes: - The dirty callback is preserved as it is necessary to trigger update commands in the hw (the screen stays black otherwise). - No idea when .create_handle in drm_framebuffer_funcs is used, but use the same drm_gem_fb_create_handle to match drm_gem_fb_funcs. - I don't know why qxl_fb_find_or_create_single used to check for an existing framebuffer and removed that check to match other drivers. - Use of drm_fb_helper_fbdev_teardown also requires "info->fbdefio" to be dynamically allocated. Replace the existing defio config by drm_fb_helper_defio_init to accomodate this. Testing results: startx with fbdev, modesetting and qxl all seems to work. Tested also with CONFIG_DRM_FBDEV_EMULATION=n, fbdev obviously fails but others are fine. QEMU -spice and QEMU -spice with vdagent and multiple (resized) displays (via remote-viewer) also works. unbind vtconsole and rmmod has *not* regressed (i.e. it still trips on a use-after-free in qxl_check_idle via qxl_ttm_fini). Ideally setup/teardown is replaced by drm_fbdev_generic_setup as that would result in further code reduction, improve error handling (like not leaking shadow memory), but unfortunately QXL has no implementation for qxl_gem_prime_vmap. Signed-off-by: Peter Wu <peter@lekensteyn.nl> Link: http://patchwork.freedesktop.org/patch/msgid/20180910132156.23201-1-peter@lekensteyn.nl Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-09-10 20:21:56 +07:00
drm_mode_config_cleanup(&qdev->ddev);
}