AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-26 06:25:10 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
9217a5bf66
linux_dsm_epyc7002/include/linux/platform_data/dma-dw.h

64 lines
2.1 KiB
C
Raw Normal View History

dmaengine: Driver for the Synopsys DesignWare DMA controller This adds a driver for the Synopsys DesignWare DMA controller (aka DMACA on AVR32 systems.) This DMA controller can be found integrated on the AT32AP7000 chip and is primarily meant for peripheral DMA transfer, but can also be used for memory-to-memory transfers. This patch is based on a driver from David Brownell which was based on an older version of the DMA Engine framework. It also implements the proposed extensions to the DMA Engine API for slave DMA operations. The dmatest client shows no problems, but there may still be room for improvement performance-wise. DMA slave transfer performance is definitely "good enough"; reading 100 MiB from an SD card running at ~20 MHz yields ~7.2 MiB/s average transfer rate. Full documentation for this controller can be found in the Synopsys DW AHB DMAC Databook: http://www.synopsys.com/designware/docs/iip/DW_ahb_dmac/latest/doc/dw_ahb_dmac_db.pdf The controller has lots of implementation options, so it's usually a good idea to check the data sheet of the chip it's intergrated on as well. The AT32AP7000 data sheet can be found here: http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 Changes since v4: * Use client_count instead of dma_chan_is_in_use() * Add missing include * Unmap buffers unless client told us not to Changes since v3: * Update to latest DMA engine and DMA slave APIs * Embed the hw descriptor into the sw descriptor * Clean up and update MODULE_DESCRIPTION, copyright date, etc. Changes since v2: * Dequeue all pending transfers in terminate_all() * Rename dw_dmac.h -> dw_dmac_regs.h * Define and use controller-specific dma_slave data * Fix up a few outdated comments * Define hardware registers as structs (doesn't generate better code, unfortunately, but it looks nicer.) * Get number of channels from platform_data instead of hardcoding it based on CONFIG_WHATEVER_CPU. * Give slave clients exclusive access to the channel Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>, Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 01:59:42 +07:00
/*
dma: dw: remove leftovers in the comment blocks There is couple of leftovers in the comment blocks. This patch modifies the comments accordingly. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-02-12 16:16:17 +07:00
* Driver for the Synopsys DesignWare DMA Controller
dmaengine: Driver for the Synopsys DesignWare DMA controller This adds a driver for the Synopsys DesignWare DMA controller (aka DMACA on AVR32 systems.) This DMA controller can be found integrated on the AT32AP7000 chip and is primarily meant for peripheral DMA transfer, but can also be used for memory-to-memory transfers. This patch is based on a driver from David Brownell which was based on an older version of the DMA Engine framework. It also implements the proposed extensions to the DMA Engine API for slave DMA operations. The dmatest client shows no problems, but there may still be room for improvement performance-wise. DMA slave transfer performance is definitely "good enough"; reading 100 MiB from an SD card running at ~20 MHz yields ~7.2 MiB/s average transfer rate. Full documentation for this controller can be found in the Synopsys DW AHB DMAC Databook: http://www.synopsys.com/designware/docs/iip/DW_ahb_dmac/latest/doc/dw_ahb_dmac_db.pdf The controller has lots of implementation options, so it's usually a good idea to check the data sheet of the chip it's intergrated on as well. The AT32AP7000 data sheet can be found here: http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 Changes since v4: * Use client_count instead of dma_chan_is_in_use() * Add missing include * Unmap buffers unless client told us not to Changes since v3: * Update to latest DMA engine and DMA slave APIs * Embed the hw descriptor into the sw descriptor * Clean up and update MODULE_DESCRIPTION, copyright date, etc. Changes since v2: * Dequeue all pending transfers in terminate_all() * Rename dw_dmac.h -> dw_dmac_regs.h * Define and use controller-specific dma_slave data * Fix up a few outdated comments * Define hardware registers as structs (doesn't generate better code, unfortunately, but it looks nicer.) * Get number of channels from platform_data instead of hardcoding it based on CONFIG_WHATEVER_CPU. * Give slave clients exclusive access to the channel Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>, Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 01:59:42 +07:00
*
* Copyright (C) 2007 Atmel Corporation
dmaengine/dw_dmac: Update maintainer-ship Nobody is currently maintaining dw_dmac. We are using dw_dmac for SPEAr13xx and are currently maintaining it. After discussing with Vinod, sending this patch to update maintainer-ship of dw_dmac. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Havard Skinnemoen <hskinnemoen@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-24 15:34:09 +07:00
* Copyright (C) 2010-2011 ST Microelectronics
dmaengine: Driver for the Synopsys DesignWare DMA controller This adds a driver for the Synopsys DesignWare DMA controller (aka DMACA on AVR32 systems.) This DMA controller can be found integrated on the AT32AP7000 chip and is primarily meant for peripheral DMA transfer, but can also be used for memory-to-memory transfers. This patch is based on a driver from David Brownell which was based on an older version of the DMA Engine framework. It also implements the proposed extensions to the DMA Engine API for slave DMA operations. The dmatest client shows no problems, but there may still be room for improvement performance-wise. DMA slave transfer performance is definitely "good enough"; reading 100 MiB from an SD card running at ~20 MHz yields ~7.2 MiB/s average transfer rate. Full documentation for this controller can be found in the Synopsys DW AHB DMAC Databook: http://www.synopsys.com/designware/docs/iip/DW_ahb_dmac/latest/doc/dw_ahb_dmac_db.pdf The controller has lots of implementation options, so it's usually a good idea to check the data sheet of the chip it's intergrated on as well. The AT32AP7000 data sheet can be found here: http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 Changes since v4: * Use client_count instead of dma_chan_is_in_use() * Add missing include * Unmap buffers unless client told us not to Changes since v3: * Update to latest DMA engine and DMA slave APIs * Embed the hw descriptor into the sw descriptor * Clean up and update MODULE_DESCRIPTION, copyright date, etc. Changes since v2: * Dequeue all pending transfers in terminate_all() * Rename dw_dmac.h -> dw_dmac_regs.h * Define and use controller-specific dma_slave data * Fix up a few outdated comments * Define hardware registers as structs (doesn't generate better code, unfortunately, but it looks nicer.) * Get number of channels from platform_data instead of hardcoding it based on CONFIG_WHATEVER_CPU. * Give slave clients exclusive access to the channel Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>, Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 01:59:42 +07:00
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
dmaengine: dw: split dma-dw.h to platform and private parts The introduced include/linux/dma/dw.h is going to contain the private extensions and structures which are shared for dw_dmac users in the kernel. Meanwhile include/linux/platform_data/dma-dw.h keeps only platform related data types and definitions. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-23 21:18:11 +07:00
#ifndef _PLATFORM_DATA_DMA_DW_H
#define _PLATFORM_DATA_DMA_DW_H
dmaengine: Driver for the Synopsys DesignWare DMA controller This adds a driver for the Synopsys DesignWare DMA controller (aka DMACA on AVR32 systems.) This DMA controller can be found integrated on the AT32AP7000 chip and is primarily meant for peripheral DMA transfer, but can also be used for memory-to-memory transfers. This patch is based on a driver from David Brownell which was based on an older version of the DMA Engine framework. It also implements the proposed extensions to the DMA Engine API for slave DMA operations. The dmatest client shows no problems, but there may still be room for improvement performance-wise. DMA slave transfer performance is definitely "good enough"; reading 100 MiB from an SD card running at ~20 MHz yields ~7.2 MiB/s average transfer rate. Full documentation for this controller can be found in the Synopsys DW AHB DMAC Databook: http://www.synopsys.com/designware/docs/iip/DW_ahb_dmac/latest/doc/dw_ahb_dmac_db.pdf The controller has lots of implementation options, so it's usually a good idea to check the data sheet of the chip it's intergrated on as well. The AT32AP7000 data sheet can be found here: http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 Changes since v4: * Use client_count instead of dma_chan_is_in_use() * Add missing include * Unmap buffers unless client told us not to Changes since v3: * Update to latest DMA engine and DMA slave APIs * Embed the hw descriptor into the sw descriptor * Clean up and update MODULE_DESCRIPTION, copyright date, etc. Changes since v2: * Dequeue all pending transfers in terminate_all() * Rename dw_dmac.h -> dw_dmac_regs.h * Define and use controller-specific dma_slave data * Fix up a few outdated comments * Define hardware registers as structs (doesn't generate better code, unfortunately, but it looks nicer.) * Get number of channels from platform_data instead of hardcoding it based on CONFIG_WHATEVER_CPU. * Give slave clients exclusive access to the channel Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>, Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 01:59:42 +07:00
dmaengine: dw: split dma-dw.h to platform and private parts The introduced include/linux/dma/dw.h is going to contain the private extensions and structures which are shared for dw_dmac users in the kernel. Meanwhile include/linux/platform_data/dma-dw.h keeps only platform related data types and definitions. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-23 21:18:11 +07:00
#include <linux/device.h>
dmaengine: Driver for the Synopsys DesignWare DMA controller This adds a driver for the Synopsys DesignWare DMA controller (aka DMACA on AVR32 systems.) This DMA controller can be found integrated on the AT32AP7000 chip and is primarily meant for peripheral DMA transfer, but can also be used for memory-to-memory transfers. This patch is based on a driver from David Brownell which was based on an older version of the DMA Engine framework. It also implements the proposed extensions to the DMA Engine API for slave DMA operations. The dmatest client shows no problems, but there may still be room for improvement performance-wise. DMA slave transfer performance is definitely "good enough"; reading 100 MiB from an SD card running at ~20 MHz yields ~7.2 MiB/s average transfer rate. Full documentation for this controller can be found in the Synopsys DW AHB DMAC Databook: http://www.synopsys.com/designware/docs/iip/DW_ahb_dmac/latest/doc/dw_ahb_dmac_db.pdf The controller has lots of implementation options, so it's usually a good idea to check the data sheet of the chip it's intergrated on as well. The AT32AP7000 data sheet can be found here: http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 Changes since v4: * Use client_count instead of dma_chan_is_in_use() * Add missing include * Unmap buffers unless client told us not to Changes since v3: * Update to latest DMA engine and DMA slave APIs * Embed the hw descriptor into the sw descriptor * Clean up and update MODULE_DESCRIPTION, copyright date, etc. Changes since v2: * Dequeue all pending transfers in terminate_all() * Rename dw_dmac.h -> dw_dmac_regs.h * Define and use controller-specific dma_slave data * Fix up a few outdated comments * Define hardware registers as structs (doesn't generate better code, unfortunately, but it looks nicer.) * Get number of channels from platform_data instead of hardcoding it based on CONFIG_WHATEVER_CPU. * Give slave clients exclusive access to the channel Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>, Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 01:59:42 +07:00
dmaengine: dw: define DW_DMA_MAX_NR_MASTERS Instead of using magic number in the code the patch provides DW_DMA_MAX_NR_MASTERS constant. While here, restrict the reading of data width array by amount of the actual number of AHB masters. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-01-14 00:08:14 +07:00
#define DW_DMA_MAX_NR_MASTERS 4
dmaengine: dw_dmac: Enhance device tree support dw_dmac driver already supports device tree but it used to have its platform data passed the non-DT way. This patch does following changes: - pass platform data via DT, non-DT way still takes precedence if both are used. - create generic filter routine - Earlier slave information was made available by slave specific filter routines in chan->private field. Now, this information would be passed from within dmac DT node. Slave drivers would now be required to pass bus_id (a string) as parameter to this generic filter(), which would be compared against the slave data passed from DT, by the generic filter routine. - Update binding document Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [Fixed __devinit usage] Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-10-16 11:19:17 +07:00
/**
* struct dw_dma_slave - Controller-specific information about a slave
*
dmaengine: dw: amend description of dma_dev field The dma_dev field is widely used in filter functions to mach with a proper DMA controller device. Thus it's not deprecated. The patch fixes the description of that field. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-01-14 00:08:13 +07:00
* @dma_dev: required DMA master device
dmaengine: dw: convert dw_dma_slave to use explicit HS interfaces Instead of exposing the possibility to set DMA registers CFG_HI and CFG_LO strict user to provide handshake interfaces explicitly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-08-20 00:29:14 +07:00
* @src_id: src request line
* @dst_id: dst request line
dmaengine: dw: rename masters to reflect actual topology The source and destination masters are reflecting buses or their layers to where the different devices can be connected. The patch changes the master names to reflect which one is related to which independently on the transfer direction. The outcome of the change is that the memory data width is now always limited by a data width of the master which is dedicated to communicate to memory. The patch will not break anything since all current users have the same data width for all masters. Though it would be nice to revisit avr32 platforms to check what is the actual hardware topology in use there. It seems that it has one bus and two masters on it as stated by Table 8-2, that's why everything works independently on the master in use. The purpose of the sequential patch is to fix the driver for configuration of more than one bus. The change is done in the assumption that src_master and dst_master are reflecting a connection to the memory and peripheral correspondently on avr32 and otherwise on the rest. Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-03-18 21:24:41 +07:00
* @m_master: memory master for transfers on allocated channel
* @p_master: peripheral master for transfers on allocated channel
dmaengine: dw_dmac: Enhance device tree support dw_dmac driver already supports device tree but it used to have its platform data passed the non-DT way. This patch does following changes: - pass platform data via DT, non-DT way still takes precedence if both are used. - create generic filter routine - Earlier slave information was made available by slave specific filter routines in chan->private field. Now, this information would be passed from within dmac DT node. Slave drivers would now be required to pass bus_id (a string) as parameter to this generic filter(), which would be compared against the slave data passed from DT, by the generic filter routine. - Update binding document Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [Fixed __devinit usage] Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-10-16 11:19:17 +07:00
*/
struct dw_dma_slave {
struct device *dma_dev;
dmaengine: dw: convert dw_dma_slave to use explicit HS interfaces Instead of exposing the possibility to set DMA registers CFG_HI and CFG_LO strict user to provide handshake interfaces explicitly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-08-20 00:29:14 +07:00
u8 src_id;
u8 dst_id;
dmaengine: dw: rename masters to reflect actual topology The source and destination masters are reflecting buses or their layers to where the different devices can be connected. The patch changes the master names to reflect which one is related to which independently on the transfer direction. The outcome of the change is that the memory data width is now always limited by a data width of the master which is dedicated to communicate to memory. The patch will not break anything since all current users have the same data width for all masters. Though it would be nice to revisit avr32 platforms to check what is the actual hardware topology in use there. It seems that it has one bus and two masters on it as stated by Table 8-2, that's why everything works independently on the master in use. The purpose of the sequential patch is to fix the driver for configuration of more than one bus. The change is done in the assumption that src_master and dst_master are reflecting a connection to the memory and peripheral correspondently on avr32 and otherwise on the rest. Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-03-18 21:24:41 +07:00
u8 m_master;
u8 p_master;
dmaengine: dw_dmac: Enhance device tree support dw_dmac driver already supports device tree but it used to have its platform data passed the non-DT way. This patch does following changes: - pass platform data via DT, non-DT way still takes precedence if both are used. - create generic filter routine - Earlier slave information was made available by slave specific filter routines in chan->private field. Now, this information would be passed from within dmac DT node. Slave drivers would now be required to pass bus_id (a string) as parameter to this generic filter(), which would be compared against the slave data passed from DT, by the generic filter routine. - Update binding document Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [Fixed __devinit usage] Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-10-16 11:19:17 +07:00
};
dmaengine: Driver for the Synopsys DesignWare DMA controller This adds a driver for the Synopsys DesignWare DMA controller (aka DMACA on AVR32 systems.) This DMA controller can be found integrated on the AT32AP7000 chip and is primarily meant for peripheral DMA transfer, but can also be used for memory-to-memory transfers. This patch is based on a driver from David Brownell which was based on an older version of the DMA Engine framework. It also implements the proposed extensions to the DMA Engine API for slave DMA operations. The dmatest client shows no problems, but there may still be room for improvement performance-wise. DMA slave transfer performance is definitely "good enough"; reading 100 MiB from an SD card running at ~20 MHz yields ~7.2 MiB/s average transfer rate. Full documentation for this controller can be found in the Synopsys DW AHB DMAC Databook: http://www.synopsys.com/designware/docs/iip/DW_ahb_dmac/latest/doc/dw_ahb_dmac_db.pdf The controller has lots of implementation options, so it's usually a good idea to check the data sheet of the chip it's intergrated on as well. The AT32AP7000 data sheet can be found here: http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 Changes since v4: * Use client_count instead of dma_chan_is_in_use() * Add missing include * Unmap buffers unless client told us not to Changes since v3: * Update to latest DMA engine and DMA slave APIs * Embed the hw descriptor into the sw descriptor * Clean up and update MODULE_DESCRIPTION, copyright date, etc. Changes since v2: * Dequeue all pending transfers in terminate_all() * Rename dw_dmac.h -> dw_dmac_regs.h * Define and use controller-specific dma_slave data * Fix up a few outdated comments * Define hardware registers as structs (doesn't generate better code, unfortunately, but it looks nicer.) * Get number of channels from platform_data instead of hardcoding it based on CONFIG_WHATEVER_CPU. * Give slave clients exclusive access to the channel Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>, Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 01:59:42 +07:00
/**
* struct dw_dma_platform_data - Controller configuration parameters
* @nr_channels: Number of channels supported by hardware (max 8)
dmaengine/dw_dmac: provide a mechanism to indicate private devices Some platforms (e.g. Picochip PC3XX) have multiple DMA controllers where some may be used for slave transfers and others for general purpose memcpy type transfers. Add a .is_private boolean to the platform data structure so that controllers can be marked as private so that the DMA_PRIVATE capability will be set for that controller. Signed-off-by: Jamie Iles <jamie.iles@picochip.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-21 21:11:54 +07:00
* @is_private: The device channels should be marked as private and not for
* by the general purpose DMA channel allocator.
dmaengine: dw: some Intel devices has no memcpy support Provide a flag to choose if the device does support memory-to-memory transfers. At least this is not true for iDMA32 controller that might be supported in the future. Besides that Intel BayTrail and Braswell users should not try this feature due to HW specific behaviour. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-14 00:09:19 +07:00
* @is_memcpy: The device channels do support memory-to-memory transfers.
dmaengine: dw_dmac: Update documentation style comments for dw_dma_platform_data Documentation style comments were missing for few fields in struct dw_dma_platform_data. Add these. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-10-16 11:19:16 +07:00
* @chan_allocation_order: Allocate channels starting from 0 or 7
* @chan_priority: Set channel priority increasing from 0 to 7 or 7 to 0.
dw_dmac: autoconfigure block_size or use platform data The maximum block size is a configurable parameter for the chip. So, driver will try to get it from the encoded component parameters. Otherwise it will come from the platform data. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-09-21 19:05:47 +07:00
* @block_size: Maximum block size supported by the controller
dw_dmac: autoconfigure data_width or get it via platform data Not all of the controllers support the 64 bit data width. Make it configurable via platform data. The driver will try to get a value from the component parameters, otherwise it will use the platform data. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-09-21 19:05:48 +07:00
* @nr_masters: Number of AHB masters supported by the controller
* @data_width: Maximum data width supported by hardware per AHB master
dmaengine: dw: revisit data_width property There several changes are done here: - Convert the property to be in bytes Besides that this is a common practice for such property, the use of a value in bytes much more convenient than handling the encoded one. - Rename data_width to data-width in the device tree bindings The change leaves the support for the old format as well just in case someone will use a newer kernel with an old device tree blob. - While here, replace dwc_fast_ffs() by __ffs() Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-27 18:15:38 +07:00
* (in bytes, power of 2)
dmaengine: Driver for the Synopsys DesignWare DMA controller This adds a driver for the Synopsys DesignWare DMA controller (aka DMACA on AVR32 systems.) This DMA controller can be found integrated on the AT32AP7000 chip and is primarily meant for peripheral DMA transfer, but can also be used for memory-to-memory transfers. This patch is based on a driver from David Brownell which was based on an older version of the DMA Engine framework. It also implements the proposed extensions to the DMA Engine API for slave DMA operations. The dmatest client shows no problems, but there may still be room for improvement performance-wise. DMA slave transfer performance is definitely "good enough"; reading 100 MiB from an SD card running at ~20 MHz yields ~7.2 MiB/s average transfer rate. Full documentation for this controller can be found in the Synopsys DW AHB DMAC Databook: http://www.synopsys.com/designware/docs/iip/DW_ahb_dmac/latest/doc/dw_ahb_dmac_db.pdf The controller has lots of implementation options, so it's usually a good idea to check the data sheet of the chip it's intergrated on as well. The AT32AP7000 data sheet can be found here: http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 Changes since v4: * Use client_count instead of dma_chan_is_in_use() * Add missing include * Unmap buffers unless client told us not to Changes since v3: * Update to latest DMA engine and DMA slave APIs * Embed the hw descriptor into the sw descriptor * Clean up and update MODULE_DESCRIPTION, copyright date, etc. Changes since v2: * Dequeue all pending transfers in terminate_all() * Rename dw_dmac.h -> dw_dmac_regs.h * Define and use controller-specific dma_slave data * Fix up a few outdated comments * Define hardware registers as structs (doesn't generate better code, unfortunately, but it looks nicer.) * Get number of channels from platform_data instead of hardcoding it based on CONFIG_WHATEVER_CPU. * Give slave clients exclusive access to the channel Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>, Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 01:59:42 +07:00
*/
struct dw_dma_platform_data {
unsigned int nr_channels;
dmaengine/dw_dmac: provide a mechanism to indicate private devices Some platforms (e.g. Picochip PC3XX) have multiple DMA controllers where some may be used for slave transfers and others for general purpose memcpy type transfers. Add a .is_private boolean to the platform data structure so that controllers can be marked as private so that the DMA_PRIVATE capability will be set for that controller. Signed-off-by: Jamie Iles <jamie.iles@picochip.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-21 21:11:54 +07:00
bool is_private;
dmaengine: dw: some Intel devices has no memcpy support Provide a flag to choose if the device does support memory-to-memory transfers. At least this is not true for iDMA32 controller that might be supported in the future. Besides that Intel BayTrail and Braswell users should not try this feature due to HW specific behaviour. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-14 00:09:19 +07:00
bool is_memcpy;
dw_dmac: Pass Channel Allocation Order from platform_data In SPEAr Platform channels 4-7 have more Fifo depth. So we must get better channel first. This patch introduces concept of channel allocation order in dw_dmac. If user doesn't pass anything or 0, than normal (ascending) channel allocation will follow, else channels will be allocated in descending order. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-03-03 17:17:21 +07:00
#define CHAN_ALLOCATION_ASCENDING 0 /* zero to seven */
#define CHAN_ALLOCATION_DESCENDING 1 /* seven to zero */
unsigned char chan_allocation_order;
dw_dmac: Pass Channel Priority from platform_data In Synopsys designware, channel priority is programmable. This patch adds support for passing channel priority through platform data. By default Ascending channel priority will be followed, i.e. channel 0 will get highest priority and channel 7 will get lowest. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-03-03 17:17:22 +07:00
#define CHAN_PRIORITY_ASCENDING 0 /* chan0 highest */
#define CHAN_PRIORITY_DESCENDING 1 /* chan7 highest */
unsigned char chan_priority;
dmaengine: dw: keep entire platform data in struct dw_dma Keep the entire platform data in the struct dw_dma. It makes the driver a bit cleaner. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-27 18:15:39 +07:00
unsigned int block_size;
dw_dmac: autoconfigure data_width or get it via platform data Not all of the controllers support the 64 bit data width. Make it configurable via platform data. The driver will try to get a value from the component parameters, otherwise it will use the platform data. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-09-21 19:05:48 +07:00
unsigned char nr_masters;
dmaengine: dw: define DW_DMA_MAX_NR_MASTERS Instead of using magic number in the code the patch provides DW_DMA_MAX_NR_MASTERS constant. While here, restrict the reading of data width array by amount of the actual number of AHB masters. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-01-14 00:08:14 +07:00
unsigned char data_width[DW_DMA_MAX_NR_MASTERS];
dmaengine: Driver for the Synopsys DesignWare DMA controller This adds a driver for the Synopsys DesignWare DMA controller (aka DMACA on AVR32 systems.) This DMA controller can be found integrated on the AT32AP7000 chip and is primarily meant for peripheral DMA transfer, but can also be used for memory-to-memory transfers. This patch is based on a driver from David Brownell which was based on an older version of the DMA Engine framework. It also implements the proposed extensions to the DMA Engine API for slave DMA operations. The dmatest client shows no problems, but there may still be room for improvement performance-wise. DMA slave transfer performance is definitely "good enough"; reading 100 MiB from an SD card running at ~20 MHz yields ~7.2 MiB/s average transfer rate. Full documentation for this controller can be found in the Synopsys DW AHB DMAC Databook: http://www.synopsys.com/designware/docs/iip/DW_ahb_dmac/latest/doc/dw_ahb_dmac_db.pdf The controller has lots of implementation options, so it's usually a good idea to check the data sheet of the chip it's intergrated on as well. The AT32AP7000 data sheet can be found here: http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 Changes since v4: * Use client_count instead of dma_chan_is_in_use() * Add missing include * Unmap buffers unless client told us not to Changes since v3: * Update to latest DMA engine and DMA slave APIs * Embed the hw descriptor into the sw descriptor * Clean up and update MODULE_DESCRIPTION, copyright date, etc. Changes since v2: * Dequeue all pending transfers in terminate_all() * Rename dw_dmac.h -> dw_dmac_regs.h * Define and use controller-specific dma_slave data * Fix up a few outdated comments * Define hardware registers as structs (doesn't generate better code, unfortunately, but it looks nicer.) * Get number of channels from platform_data instead of hardcoding it based on CONFIG_WHATEVER_CPU. * Give slave clients exclusive access to the channel Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>, Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-09 01:59:42 +07:00
};
dmaengine: dw: split dma-dw.h to platform and private parts The introduced include/linux/dma/dw.h is going to contain the private extensions and structures which are shared for dw_dmac users in the kernel. Meanwhile include/linux/platform_data/dma-dw.h keeps only platform related data types and definitions. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-23 21:18:11 +07:00
#endif /* _PLATFORM_DATA_DMA_DW_H */
Reference in New Issue Copy Permalink