linux_dsm_epyc7002/drivers/regulator/lm363x-regulator.c

367 lines
10 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* TI LM363X Regulator Driver
*
* Copyright 2015 Texas Instruments
*
* Author: Milo Kim <milo.kim@ti.com>
*/
#include <linux/err.h>
#include <linux/kernel.h>
#include <linux/mfd/ti-lmu.h>
#include <linux/mfd/ti-lmu-register.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/gpio/consumer.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/of_regulator.h>
#include <linux/slab.h>
/* LM3631 */
#define LM3631_BOOST_VSEL_MAX 0x25
#define LM3631_LDO_VSEL_MAX 0x28
#define LM3631_CONT_VSEL_MAX 0x03
#define LM3631_VBOOST_MIN 4500000
#define LM3631_VCONT_MIN 1800000
#define LM3631_VLDO_MIN 4000000
#define ENABLE_TIME_USEC 1000
/* LM3632 */
#define LM3632_BOOST_VSEL_MAX 0x26
#define LM3632_LDO_VSEL_MAX 0x28
#define LM3632_VBOOST_MIN 4500000
#define LM3632_VLDO_MIN 4000000
/* LM36274 */
#define LM36274_BOOST_VSEL_MAX 0x3f
#define LM36274_LDO_VSEL_MAX 0x32
#define LM36274_VOLTAGE_MIN 4000000
/* Common */
#define LM363X_STEP_50mV 50000
#define LM363X_STEP_500mV 500000
static const int ldo_cont_enable_time[] = {
0, 2000, 5000, 10000, 20000, 50000, 100000, 200000,
};
static int lm363x_regulator_enable_time(struct regulator_dev *rdev)
{
enum lm363x_regulator_id id = rdev_get_id(rdev);
unsigned int val, addr, mask;
switch (id) {
case LM3631_LDO_CONT:
addr = LM3631_REG_ENTIME_VCONT;
mask = LM3631_ENTIME_CONT_MASK;
break;
case LM3631_LDO_OREF:
addr = LM3631_REG_ENTIME_VOREF;
mask = LM3631_ENTIME_MASK;
break;
case LM3631_LDO_POS:
addr = LM3631_REG_ENTIME_VPOS;
mask = LM3631_ENTIME_MASK;
break;
case LM3631_LDO_NEG:
addr = LM3631_REG_ENTIME_VNEG;
mask = LM3631_ENTIME_MASK;
break;
default:
return 0;
}
if (regmap_read(rdev->regmap, addr, &val))
return -EINVAL;
val = (val & mask) >> LM3631_ENTIME_SHIFT;
if (id == LM3631_LDO_CONT)
return ldo_cont_enable_time[val];
else
return ENABLE_TIME_USEC * val;
}
static const struct regulator_ops lm363x_boost_voltage_table_ops = {
.list_voltage = regulator_list_voltage_linear,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
};
static const struct regulator_ops lm363x_regulator_voltage_table_ops = {
.list_voltage = regulator_list_voltage_linear,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.enable_time = lm363x_regulator_enable_time,
};
static const struct regulator_desc lm363x_regulator_desc[] = {
/* LM3631 */
{
.name = "vboost",
.of_match = "vboost",
.id = LM3631_BOOST,
.ops = &lm363x_boost_voltage_table_ops,
.n_voltages = LM3631_BOOST_VSEL_MAX + 1,
.min_uV = LM3631_VBOOST_MIN,
.uV_step = LM363X_STEP_50mV,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LM3631_REG_VOUT_BOOST,
.vsel_mask = LM3631_VOUT_MASK,
},
{
.name = "ldo_cont",
.of_match = "vcont",
.id = LM3631_LDO_CONT,
.ops = &lm363x_regulator_voltage_table_ops,
.n_voltages = LM3631_CONT_VSEL_MAX + 1,
.min_uV = LM3631_VCONT_MIN,
.uV_step = LM363X_STEP_500mV,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LM3631_REG_VOUT_CONT,
.vsel_mask = LM3631_VOUT_CONT_MASK,
.enable_reg = LM3631_REG_LDO_CTRL2,
.enable_mask = LM3631_EN_CONT_MASK,
},
{
.name = "ldo_oref",
.of_match = "voref",
.id = LM3631_LDO_OREF,
.ops = &lm363x_regulator_voltage_table_ops,
.n_voltages = LM3631_LDO_VSEL_MAX + 1,
.min_uV = LM3631_VLDO_MIN,
.uV_step = LM363X_STEP_50mV,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LM3631_REG_VOUT_OREF,
.vsel_mask = LM3631_VOUT_MASK,
.enable_reg = LM3631_REG_LDO_CTRL1,
.enable_mask = LM3631_EN_OREF_MASK,
},
{
.name = "ldo_vpos",
.of_match = "vpos",
.id = LM3631_LDO_POS,
.ops = &lm363x_regulator_voltage_table_ops,
.n_voltages = LM3631_LDO_VSEL_MAX + 1,
.min_uV = LM3631_VLDO_MIN,
.uV_step = LM363X_STEP_50mV,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LM3631_REG_VOUT_POS,
.vsel_mask = LM3631_VOUT_MASK,
.enable_reg = LM3631_REG_LDO_CTRL1,
.enable_mask = LM3631_EN_VPOS_MASK,
},
{
.name = "ldo_vneg",
.of_match = "vneg",
.id = LM3631_LDO_NEG,
.ops = &lm363x_regulator_voltage_table_ops,
.n_voltages = LM3631_LDO_VSEL_MAX + 1,
.min_uV = LM3631_VLDO_MIN,
.uV_step = LM363X_STEP_50mV,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LM3631_REG_VOUT_NEG,
.vsel_mask = LM3631_VOUT_MASK,
.enable_reg = LM3631_REG_LDO_CTRL1,
.enable_mask = LM3631_EN_VNEG_MASK,
},
/* LM3632 */
{
.name = "vboost",
.of_match = "vboost",
.id = LM3632_BOOST,
.ops = &lm363x_boost_voltage_table_ops,
.n_voltages = LM3632_BOOST_VSEL_MAX + 1,
.min_uV = LM3632_VBOOST_MIN,
.uV_step = LM363X_STEP_50mV,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LM3632_REG_VOUT_BOOST,
.vsel_mask = LM3632_VOUT_MASK,
},
{
.name = "ldo_vpos",
.of_match = "vpos",
.id = LM3632_LDO_POS,
.ops = &lm363x_regulator_voltage_table_ops,
.n_voltages = LM3632_LDO_VSEL_MAX + 1,
.min_uV = LM3632_VLDO_MIN,
.uV_step = LM363X_STEP_50mV,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LM3632_REG_VOUT_POS,
.vsel_mask = LM3632_VOUT_MASK,
.enable_reg = LM3632_REG_BIAS_CONFIG,
.enable_mask = LM3632_EN_VPOS_MASK,
},
{
.name = "ldo_vneg",
.of_match = "vneg",
.id = LM3632_LDO_NEG,
.ops = &lm363x_regulator_voltage_table_ops,
.n_voltages = LM3632_LDO_VSEL_MAX + 1,
.min_uV = LM3632_VLDO_MIN,
.uV_step = LM363X_STEP_50mV,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LM3632_REG_VOUT_NEG,
.vsel_mask = LM3632_VOUT_MASK,
.enable_reg = LM3632_REG_BIAS_CONFIG,
.enable_mask = LM3632_EN_VNEG_MASK,
},
/* LM36274 */
{
.name = "vboost",
.of_match = "vboost",
.id = LM36274_BOOST,
.ops = &lm363x_boost_voltage_table_ops,
.n_voltages = LM36274_BOOST_VSEL_MAX + 1,
.min_uV = LM36274_VOLTAGE_MIN,
.uV_step = LM363X_STEP_50mV,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LM36274_REG_VOUT_BOOST,
.vsel_mask = LM36274_VOUT_MASK,
},
{
.name = "ldo_vpos",
.of_match = "vpos",
.id = LM36274_LDO_POS,
.ops = &lm363x_regulator_voltage_table_ops,
.n_voltages = LM36274_LDO_VSEL_MAX + 1,
.min_uV = LM36274_VOLTAGE_MIN,
.uV_step = LM363X_STEP_50mV,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LM36274_REG_VOUT_POS,
.vsel_mask = LM36274_VOUT_MASK,
.enable_reg = LM36274_REG_BIAS_CONFIG_1,
.enable_mask = LM36274_EN_VPOS_MASK,
},
{
.name = "ldo_vneg",
.of_match = "vneg",
.id = LM36274_LDO_NEG,
.ops = &lm363x_regulator_voltage_table_ops,
.n_voltages = LM36274_LDO_VSEL_MAX + 1,
.min_uV = LM36274_VOLTAGE_MIN,
.uV_step = LM363X_STEP_50mV,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.vsel_reg = LM36274_REG_VOUT_NEG,
.vsel_mask = LM36274_VOUT_MASK,
.enable_reg = LM36274_REG_BIAS_CONFIG_1,
.enable_mask = LM36274_EN_VNEG_MASK,
},
};
static struct gpio_desc *lm363x_regulator_of_get_enable_gpio(struct device *dev, int id)
{
/*
* Check LCM_EN1/2_GPIO is configured.
* Those pins are used for enabling VPOS/VNEG LDOs.
* Do not use devm* here: the regulator core takes over the
* lifecycle management of the GPIO descriptor.
*/
switch (id) {
case LM3632_LDO_POS:
case LM36274_LDO_POS:
return gpiod_get_index_optional(dev, "enable", 0,
GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE);
case LM3632_LDO_NEG:
case LM36274_LDO_NEG:
return gpiod_get_index_optional(dev, "enable", 1,
GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE);
default:
return NULL;
}
}
static int lm363x_regulator_set_ext_en(struct regmap *regmap, int id)
{
int ext_en_mask = 0;
switch (id) {
case LM3632_LDO_POS:
case LM3632_LDO_NEG:
ext_en_mask = LM3632_EXT_EN_MASK;
break;
case LM36274_LDO_POS:
case LM36274_LDO_NEG:
ext_en_mask = LM36274_EXT_EN_MASK;
break;
default:
return -ENODEV;
}
return regmap_update_bits(regmap, lm363x_regulator_desc[id].enable_reg,
ext_en_mask, ext_en_mask);
}
static int lm363x_regulator_probe(struct platform_device *pdev)
{
struct ti_lmu *lmu = dev_get_drvdata(pdev->dev.parent);
struct regmap *regmap = lmu->regmap;
struct regulator_config cfg = { };
struct regulator_dev *rdev;
struct device *dev = &pdev->dev;
int id = pdev->id;
struct gpio_desc *gpiod;
int ret;
cfg.dev = dev;
cfg.regmap = regmap;
/*
* LM3632 LDOs can be controlled by external pin.
* Register update is required if the pin is used.
*/
gpiod = lm363x_regulator_of_get_enable_gpio(dev, id);
if (IS_ERR(gpiod))
return PTR_ERR(gpiod);
if (gpiod) {
cfg.ena_gpiod = gpiod;
ret = lm363x_regulator_set_ext_en(regmap, id);
if (ret) {
gpiod_put(gpiod);
dev_err(dev, "External pin err: %d\n", ret);
return ret;
}
}
rdev = devm_regulator_register(dev, &lm363x_regulator_desc[id], &cfg);
if (IS_ERR(rdev)) {
ret = PTR_ERR(rdev);
dev_err(dev, "[%d] regulator register err: %d\n", id, ret);
return ret;
}
return 0;
}
static struct platform_driver lm363x_regulator_driver = {
.probe = lm363x_regulator_probe,
.driver = {
.name = "lm363x-regulator",
},
};
module_platform_driver(lm363x_regulator_driver);
MODULE_DESCRIPTION("TI LM363X Regulator Driver");
MODULE_AUTHOR("Milo Kim");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:lm363x-regulator");