linux_dsm_epyc7002/drivers/gpu/drm/mgag200/mgag200_mode.c

1732 lines
40 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright 2010 Matt Turner.
* Copyright 2012 Red Hat
*
* Authors: Matthew Garrett
* Matt Turner
* Dave Airlie
*/
#include <linux/delay.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_fourcc.h>
#include <drm/drm_pci.h>
#include <drm/drm_plane_helper.h>
drm: Split out drm_probe_helper.h Having the probe helper stuff (which pretty much everyone needs) in the drm_crtc_helper.h file (which atomic drivers should never need) is confusing. Split them out. To make sure I actually achieved the goal here I went through all drivers. And indeed, all atomic drivers are now free of drm_crtc_helper.h includes. v2: Make it compile. There was so much compile fail on arm drivers that I figured I'll better not include any of the acks on v1. v3: Massive rebase because i915 has lost a lot of drmP.h includes, but not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h there was still one, which this patch largely removes. Which means rolling out lots more includes all over. This will also conflict with ongoing drmP.h cleanup by others I expect. v3: Rebase on top of atomic bochs. v4: Review from Laurent for bridge/rcar/omap/shmob/core bits: - (re)move some of the added includes, use the better include files in other places (all suggested from Laurent adopted unchanged). - sort alphabetically v5: Actually try to sort them, and while at it, sort all the ones I touch. v6: Rebase onto i915 changes. v7: Rebase once more. Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by: CK Hu <ck.hu@mediatek.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: virtualization@lists.linux-foundation.org Cc: etnaviv@lists.freedesktop.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: spice-devel@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-tegra@vger.kernel.org Cc: xen-devel@lists.xen.org Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
2019-01-18 04:03:34 +07:00
#include <drm/drm_probe_helper.h>
#include "mgag200_drv.h"
#define MGAG200_LUT_SIZE 256
/*
* This file contains setup code for the CRTC.
*/
static void mga_crtc_load_lut(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct mga_device *mdev = dev->dev_private;
struct drm_framebuffer *fb = crtc->primary->fb;
u16 *r_ptr, *g_ptr, *b_ptr;
int i;
if (!crtc->enabled)
return;
r_ptr = crtc->gamma_store;
g_ptr = r_ptr + crtc->gamma_size;
b_ptr = g_ptr + crtc->gamma_size;
WREG8(DAC_INDEX + MGA1064_INDEX, 0);
drm: Nuke fb->bits_per_pixel Replace uses of fb->bits_per_pixel with fb->format->cpp[0]*8. Less duplicated information is a good thing. Note that I didn't put parens around the cpp*8 in the below cocci script, on account of not wanting spurious parens all over the place. Instead I did the unsafe way, and tried to look over the entire diff to spot if any dangerous expressions were produced. I didn't see any. There are some cases where previously the code did X*bpp/8, so the division happened after the multiplication. Those are now just X*cpp so the division effectively happens before the multiplication, but that is perfectly fine since bpp is always a multiple of 8. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer FB; expression E; @@ ( - E * FB.bits_per_pixel / 8 + E * FB.format->cpp[0] | - FB.bits_per_pixel / 8 + FB.format->cpp[0] | - E * FB.bits_per_pixel >> 3 + E * FB.format->cpp[0] | - FB.bits_per_pixel >> 3 + FB.format->cpp[0] | - (FB.bits_per_pixel + 7) / 8 + FB.format->cpp[0] | - FB.bits_per_pixel + FB.format->cpp[0] * 8 | - FB.format->cpp[0] * 8 != 8 + FB.format->cpp[0] != 1 ) @@ struct drm_framebuffer *FB; expression E; @@ ( - E * FB->bits_per_pixel / 8 + E * FB->format->cpp[0] | - FB->bits_per_pixel / 8 + FB->format->cpp[0] | - E * FB->bits_per_pixel >> 3 + E * FB->format->cpp[0] | - FB->bits_per_pixel >> 3 + FB->format->cpp[0] | - (FB->bits_per_pixel + 7) / 8 + FB->format->cpp[0] | - FB->bits_per_pixel + FB->format->cpp[0] * 8 | - FB->format->cpp[0] * 8 != 8 + FB->format->cpp[0] != 1 ) @@ struct drm_plane_state *state; expression E; @@ ( - E * state->fb->bits_per_pixel / 8 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel / 8 + state->fb->format->cpp[0] | - E * state->fb->bits_per_pixel >> 3 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel >> 3 + state->fb->format->cpp[0] | - (state->fb->bits_per_pixel + 7) / 8 + state->fb->format->cpp[0] | - state->fb->bits_per_pixel + state->fb->format->cpp[0] * 8 | - state->fb->format->cpp[0] * 8 != 8 + state->fb->format->cpp[0] != 1 ) @@ @@ - (8 * 8) + 8 * 8 @@ struct drm_framebuffer FB; @@ - (FB.format->cpp[0]) + FB.format->cpp[0] @@ struct drm_framebuffer *FB; @@ - (FB->format->cpp[0]) + FB->format->cpp[0] @@ @@ struct drm_framebuffer { ... - int bits_per_pixel; ... }; v2: Clean up the 'cpp*8 != 8' and '(8 * 8)' cases (Laurent) v3: Adjusted the semantic patch a bit and regenerated due to code changes Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Link: http://patchwork.freedesktop.org/patch/msgid/1481751140-18352-1-git-send-email-ville.syrjala@linux.intel.com
2016-12-15 04:32:20 +07:00
if (fb && fb->format->cpp[0] * 8 == 16) {
int inc = (fb->format->depth == 15) ? 8 : 4;
u8 r, b;
for (i = 0; i < MGAG200_LUT_SIZE; i += inc) {
if (fb->format->depth == 16) {
if (i > (MGAG200_LUT_SIZE >> 1)) {
r = b = 0;
} else {
r = *r_ptr++ >> 8;
b = *b_ptr++ >> 8;
r_ptr++;
b_ptr++;
}
} else {
r = *r_ptr++ >> 8;
b = *b_ptr++ >> 8;
}
/* VGA registers */
WREG8(DAC_INDEX + MGA1064_COL_PAL, r);
WREG8(DAC_INDEX + MGA1064_COL_PAL, *g_ptr++ >> 8);
WREG8(DAC_INDEX + MGA1064_COL_PAL, b);
}
return;
}
for (i = 0; i < MGAG200_LUT_SIZE; i++) {
/* VGA registers */
WREG8(DAC_INDEX + MGA1064_COL_PAL, *r_ptr++ >> 8);
WREG8(DAC_INDEX + MGA1064_COL_PAL, *g_ptr++ >> 8);
WREG8(DAC_INDEX + MGA1064_COL_PAL, *b_ptr++ >> 8);
}
}
static inline void mga_wait_vsync(struct mga_device *mdev)
{
unsigned long timeout = jiffies + HZ/10;
unsigned int status = 0;
do {
status = RREG32(MGAREG_Status);
} while ((status & 0x08) && time_before(jiffies, timeout));
timeout = jiffies + HZ/10;
status = 0;
do {
status = RREG32(MGAREG_Status);
} while (!(status & 0x08) && time_before(jiffies, timeout));
}
static inline void mga_wait_busy(struct mga_device *mdev)
{
unsigned long timeout = jiffies + HZ;
unsigned int status = 0;
do {
status = RREG8(MGAREG_Status + 2);
} while ((status & 0x01) && time_before(jiffies, timeout));
}
#define P_ARRAY_SIZE 9
static int mga_g200se_set_plls(struct mga_device *mdev, long clock)
{
unsigned int vcomax, vcomin, pllreffreq;
unsigned int delta, tmpdelta, permitteddelta;
unsigned int testp, testm, testn;
unsigned int p, m, n;
unsigned int computed;
unsigned int pvalues_e4[P_ARRAY_SIZE] = {16, 14, 12, 10, 8, 6, 4, 2, 1};
unsigned int fvv;
unsigned int i;
if (mdev->unique_rev_id <= 0x03) {
m = n = p = 0;
vcomax = 320000;
vcomin = 160000;
pllreffreq = 25000;
delta = 0xffffffff;
permitteddelta = clock * 5 / 1000;
for (testp = 8; testp > 0; testp /= 2) {
if (clock * testp > vcomax)
continue;
if (clock * testp < vcomin)
continue;
for (testn = 17; testn < 256; testn++) {
for (testm = 1; testm < 32; testm++) {
computed = (pllreffreq * testn) /
(testm * testp);
if (computed > clock)
tmpdelta = computed - clock;
else
tmpdelta = clock - computed;
if (tmpdelta < delta) {
delta = tmpdelta;
m = testm - 1;
n = testn - 1;
p = testp - 1;
}
}
}
}
} else {
m = n = p = 0;
vcomax = 1600000;
vcomin = 800000;
pllreffreq = 25000;
if (clock < 25000)
clock = 25000;
clock = clock * 2;
delta = 0xFFFFFFFF;
/* Permited delta is 0.5% as VESA Specification */
permitteddelta = clock * 5 / 1000;
for (i = 0 ; i < P_ARRAY_SIZE ; i++) {
testp = pvalues_e4[i];
if ((clock * testp) > vcomax)
continue;
if ((clock * testp) < vcomin)
continue;
for (testn = 50; testn <= 256; testn++) {
for (testm = 1; testm <= 32; testm++) {
computed = (pllreffreq * testn) /
(testm * testp);
if (computed > clock)
tmpdelta = computed - clock;
else
tmpdelta = clock - computed;
if (tmpdelta < delta) {
delta = tmpdelta;
m = testm - 1;
n = testn - 1;
p = testp - 1;
}
}
}
}
fvv = pllreffreq * (n + 1) / (m + 1);
fvv = (fvv - 800000) / 50000;
if (fvv > 15)
fvv = 15;
p |= (fvv << 4);
m |= 0x80;
clock = clock / 2;
}
if (delta > permitteddelta) {
pr_warn("PLL delta too large\n");
return 1;
}
WREG_DAC(MGA1064_PIX_PLLC_M, m);
WREG_DAC(MGA1064_PIX_PLLC_N, n);
WREG_DAC(MGA1064_PIX_PLLC_P, p);
if (mdev->unique_rev_id >= 0x04) {
WREG_DAC(0x1a, 0x09);
msleep(20);
WREG_DAC(0x1a, 0x01);
}
return 0;
}
static int mga_g200wb_set_plls(struct mga_device *mdev, long clock)
{
unsigned int vcomax, vcomin, pllreffreq;
unsigned int delta, tmpdelta;
unsigned int testp, testm, testn, testp2;
unsigned int p, m, n;
unsigned int computed;
int i, j, tmpcount, vcount;
bool pll_locked = false;
u8 tmp;
m = n = p = 0;
delta = 0xffffffff;
if (mdev->type == G200_EW3) {
vcomax = 800000;
vcomin = 400000;
pllreffreq = 25000;
for (testp = 1; testp < 8; testp++) {
for (testp2 = 1; testp2 < 8; testp2++) {
if (testp < testp2)
continue;
if ((clock * testp * testp2) > vcomax)
continue;
if ((clock * testp * testp2) < vcomin)
continue;
for (testm = 1; testm < 26; testm++) {
for (testn = 32; testn < 2048 ; testn++) {
computed = (pllreffreq * testn) /
(testm * testp * testp2);
if (computed > clock)
tmpdelta = computed - clock;
else
tmpdelta = clock - computed;
if (tmpdelta < delta) {
delta = tmpdelta;
m = ((testn & 0x100) >> 1) |
(testm);
n = (testn & 0xFF);
p = ((testn & 0x600) >> 3) |
(testp2 << 3) |
(testp);
}
}
}
}
}
} else {
vcomax = 550000;
vcomin = 150000;
pllreffreq = 48000;
for (testp = 1; testp < 9; testp++) {
if (clock * testp > vcomax)
continue;
if (clock * testp < vcomin)
continue;
for (testm = 1; testm < 17; testm++) {
for (testn = 1; testn < 151; testn++) {
computed = (pllreffreq * testn) /
(testm * testp);
if (computed > clock)
tmpdelta = computed - clock;
else
tmpdelta = clock - computed;
if (tmpdelta < delta) {
delta = tmpdelta;
n = testn - 1;
m = (testm - 1) |
((n >> 1) & 0x80);
p = testp - 1;
}
}
}
}
}
for (i = 0; i <= 32 && pll_locked == false; i++) {
if (i > 0) {
WREG8(MGAREG_CRTC_INDEX, 0x1e);
tmp = RREG8(MGAREG_CRTC_DATA);
if (tmp < 0xff)
WREG8(MGAREG_CRTC_DATA, tmp+1);
}
/* set pixclkdis to 1 */
WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL);
tmp = RREG8(DAC_DATA);
tmp |= MGA1064_PIX_CLK_CTL_CLK_DIS;
WREG8(DAC_DATA, tmp);
WREG8(DAC_INDEX, MGA1064_REMHEADCTL);
tmp = RREG8(DAC_DATA);
tmp |= MGA1064_REMHEADCTL_CLKDIS;
WREG8(DAC_DATA, tmp);
/* select PLL Set C */
tmp = RREG8(MGAREG_MEM_MISC_READ);
tmp |= 0x3 << 2;
WREG8(MGAREG_MEM_MISC_WRITE, tmp);
WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL);
tmp = RREG8(DAC_DATA);
tmp |= MGA1064_PIX_CLK_CTL_CLK_POW_DOWN | 0x80;
WREG8(DAC_DATA, tmp);
udelay(500);
/* reset the PLL */
WREG8(DAC_INDEX, MGA1064_VREF_CTL);
tmp = RREG8(DAC_DATA);
tmp &= ~0x04;
WREG8(DAC_DATA, tmp);
udelay(50);
/* program pixel pll register */
WREG_DAC(MGA1064_WB_PIX_PLLC_N, n);
WREG_DAC(MGA1064_WB_PIX_PLLC_M, m);
WREG_DAC(MGA1064_WB_PIX_PLLC_P, p);
udelay(50);
/* turn pll on */
WREG8(DAC_INDEX, MGA1064_VREF_CTL);
tmp = RREG8(DAC_DATA);
tmp |= 0x04;
WREG_DAC(MGA1064_VREF_CTL, tmp);
udelay(500);
/* select the pixel pll */
WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL);
tmp = RREG8(DAC_DATA);
tmp &= ~MGA1064_PIX_CLK_CTL_SEL_MSK;
tmp |= MGA1064_PIX_CLK_CTL_SEL_PLL;
WREG8(DAC_DATA, tmp);
WREG8(DAC_INDEX, MGA1064_REMHEADCTL);
tmp = RREG8(DAC_DATA);
tmp &= ~MGA1064_REMHEADCTL_CLKSL_MSK;
tmp |= MGA1064_REMHEADCTL_CLKSL_PLL;
WREG8(DAC_DATA, tmp);
/* reset dotclock rate bit */
WREG8(MGAREG_SEQ_INDEX, 1);
tmp = RREG8(MGAREG_SEQ_DATA);
tmp &= ~0x8;
WREG8(MGAREG_SEQ_DATA, tmp);
WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL);
tmp = RREG8(DAC_DATA);
tmp &= ~MGA1064_PIX_CLK_CTL_CLK_DIS;
WREG8(DAC_DATA, tmp);
vcount = RREG8(MGAREG_VCOUNT);
for (j = 0; j < 30 && pll_locked == false; j++) {
tmpcount = RREG8(MGAREG_VCOUNT);
if (tmpcount < vcount)
vcount = 0;
if ((tmpcount - vcount) > 2)
pll_locked = true;
else
udelay(5);
}
}
WREG8(DAC_INDEX, MGA1064_REMHEADCTL);
tmp = RREG8(DAC_DATA);
tmp &= ~MGA1064_REMHEADCTL_CLKDIS;
WREG_DAC(MGA1064_REMHEADCTL, tmp);
return 0;
}
static int mga_g200ev_set_plls(struct mga_device *mdev, long clock)
{
unsigned int vcomax, vcomin, pllreffreq;
unsigned int delta, tmpdelta;
unsigned int testp, testm, testn;
unsigned int p, m, n;
unsigned int computed;
u8 tmp;
m = n = p = 0;
vcomax = 550000;
vcomin = 150000;
pllreffreq = 50000;
delta = 0xffffffff;
for (testp = 16; testp > 0; testp--) {
if (clock * testp > vcomax)
continue;
if (clock * testp < vcomin)
continue;
for (testn = 1; testn < 257; testn++) {
for (testm = 1; testm < 17; testm++) {
computed = (pllreffreq * testn) /
(testm * testp);
if (computed > clock)
tmpdelta = computed - clock;
else
tmpdelta = clock - computed;
if (tmpdelta < delta) {
delta = tmpdelta;
n = testn - 1;
m = testm - 1;
p = testp - 1;
}
}
}
}
WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL);
tmp = RREG8(DAC_DATA);
tmp |= MGA1064_PIX_CLK_CTL_CLK_DIS;
WREG8(DAC_DATA, tmp);
tmp = RREG8(MGAREG_MEM_MISC_READ);
tmp |= 0x3 << 2;
WREG8(MGAREG_MEM_MISC_WRITE, tmp);
WREG8(DAC_INDEX, MGA1064_PIX_PLL_STAT);
tmp = RREG8(DAC_DATA);
WREG8(DAC_DATA, tmp & ~0x40);
WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL);
tmp = RREG8(DAC_DATA);
tmp |= MGA1064_PIX_CLK_CTL_CLK_POW_DOWN;
WREG8(DAC_DATA, tmp);
WREG_DAC(MGA1064_EV_PIX_PLLC_M, m);
WREG_DAC(MGA1064_EV_PIX_PLLC_N, n);
WREG_DAC(MGA1064_EV_PIX_PLLC_P, p);
udelay(50);
WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL);
tmp = RREG8(DAC_DATA);
tmp &= ~MGA1064_PIX_CLK_CTL_CLK_POW_DOWN;
WREG8(DAC_DATA, tmp);
udelay(500);
WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL);
tmp = RREG8(DAC_DATA);
tmp &= ~MGA1064_PIX_CLK_CTL_SEL_MSK;
tmp |= MGA1064_PIX_CLK_CTL_SEL_PLL;
WREG8(DAC_DATA, tmp);
WREG8(DAC_INDEX, MGA1064_PIX_PLL_STAT);
tmp = RREG8(DAC_DATA);
WREG8(DAC_DATA, tmp | 0x40);
tmp = RREG8(MGAREG_MEM_MISC_READ);
tmp |= (0x3 << 2);
WREG8(MGAREG_MEM_MISC_WRITE, tmp);
WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL);
tmp = RREG8(DAC_DATA);
tmp &= ~MGA1064_PIX_CLK_CTL_CLK_DIS;
WREG8(DAC_DATA, tmp);
return 0;
}
static int mga_g200eh_set_plls(struct mga_device *mdev, long clock)
{
unsigned int vcomax, vcomin, pllreffreq;
unsigned int delta, tmpdelta;
unsigned int testp, testm, testn;
unsigned int p, m, n;
unsigned int computed;
int i, j, tmpcount, vcount;
u8 tmp;
bool pll_locked = false;
m = n = p = 0;
if (mdev->type == G200_EH3) {
vcomax = 3000000;
vcomin = 1500000;
pllreffreq = 25000;
delta = 0xffffffff;
testp = 0;
for (testm = 150; testm >= 6; testm--) {
if (clock * testm > vcomax)
continue;
if (clock * testm < vcomin)
continue;
for (testn = 120; testn >= 60; testn--) {
computed = (pllreffreq * testn) / testm;
if (computed > clock)
tmpdelta = computed - clock;
else
tmpdelta = clock - computed;
if (tmpdelta < delta) {
delta = tmpdelta;
n = testn;
m = testm;
p = testp;
}
if (delta == 0)
break;
}
if (delta == 0)
break;
}
} else {
vcomax = 800000;
vcomin = 400000;
pllreffreq = 33333;
delta = 0xffffffff;
for (testp = 16; testp > 0; testp >>= 1) {
if (clock * testp > vcomax)
continue;
if (clock * testp < vcomin)
continue;
for (testm = 1; testm < 33; testm++) {
for (testn = 17; testn < 257; testn++) {
computed = (pllreffreq * testn) /
(testm * testp);
if (computed > clock)
tmpdelta = computed - clock;
else
tmpdelta = clock - computed;
if (tmpdelta < delta) {
delta = tmpdelta;
n = testn - 1;
m = (testm - 1);
p = testp - 1;
}
if ((clock * testp) >= 600000)
p |= 0x80;
}
}
}
}
for (i = 0; i <= 32 && pll_locked == false; i++) {
WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL);
tmp = RREG8(DAC_DATA);
tmp |= MGA1064_PIX_CLK_CTL_CLK_DIS;
WREG8(DAC_DATA, tmp);
tmp = RREG8(MGAREG_MEM_MISC_READ);
tmp |= 0x3 << 2;
WREG8(MGAREG_MEM_MISC_WRITE, tmp);
WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL);
tmp = RREG8(DAC_DATA);
tmp |= MGA1064_PIX_CLK_CTL_CLK_POW_DOWN;
WREG8(DAC_DATA, tmp);
udelay(500);
WREG_DAC(MGA1064_EH_PIX_PLLC_M, m);
WREG_DAC(MGA1064_EH_PIX_PLLC_N, n);
WREG_DAC(MGA1064_EH_PIX_PLLC_P, p);
udelay(500);
WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL);
tmp = RREG8(DAC_DATA);
tmp &= ~MGA1064_PIX_CLK_CTL_SEL_MSK;
tmp |= MGA1064_PIX_CLK_CTL_SEL_PLL;
WREG8(DAC_DATA, tmp);
WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL);
tmp = RREG8(DAC_DATA);
tmp &= ~MGA1064_PIX_CLK_CTL_CLK_DIS;
tmp &= ~MGA1064_PIX_CLK_CTL_CLK_POW_DOWN;
WREG8(DAC_DATA, tmp);
vcount = RREG8(MGAREG_VCOUNT);
for (j = 0; j < 30 && pll_locked == false; j++) {
tmpcount = RREG8(MGAREG_VCOUNT);
if (tmpcount < vcount)
vcount = 0;
if ((tmpcount - vcount) > 2)
pll_locked = true;
else
udelay(5);
}
}
return 0;
}
static int mga_g200er_set_plls(struct mga_device *mdev, long clock)
{
unsigned int vcomax, vcomin, pllreffreq;
unsigned int delta, tmpdelta;
int testr, testn, testm, testo;
unsigned int p, m, n;
unsigned int computed, vco;
int tmp;
const unsigned int m_div_val[] = { 1, 2, 4, 8 };
m = n = p = 0;
vcomax = 1488000;
vcomin = 1056000;
pllreffreq = 48000;
delta = 0xffffffff;
for (testr = 0; testr < 4; testr++) {
if (delta == 0)
break;
for (testn = 5; testn < 129; testn++) {
if (delta == 0)
break;
for (testm = 3; testm >= 0; testm--) {
if (delta == 0)
break;
for (testo = 5; testo < 33; testo++) {
vco = pllreffreq * (testn + 1) /
(testr + 1);
if (vco < vcomin)
continue;
if (vco > vcomax)
continue;
computed = vco / (m_div_val[testm] * (testo + 1));
if (computed > clock)
tmpdelta = computed - clock;
else
tmpdelta = clock - computed;
if (tmpdelta < delta) {
delta = tmpdelta;
m = testm | (testo << 3);
n = testn;
p = testr | (testr << 3);
}
}
}
}
}
WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL);
tmp = RREG8(DAC_DATA);
tmp |= MGA1064_PIX_CLK_CTL_CLK_DIS;
WREG8(DAC_DATA, tmp);
WREG8(DAC_INDEX, MGA1064_REMHEADCTL);
tmp = RREG8(DAC_DATA);
tmp |= MGA1064_REMHEADCTL_CLKDIS;
WREG8(DAC_DATA, tmp);
tmp = RREG8(MGAREG_MEM_MISC_READ);
tmp |= (0x3<<2) | 0xc0;
WREG8(MGAREG_MEM_MISC_WRITE, tmp);
WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL);
tmp = RREG8(DAC_DATA);
tmp &= ~MGA1064_PIX_CLK_CTL_CLK_DIS;
tmp |= MGA1064_PIX_CLK_CTL_CLK_POW_DOWN;
WREG8(DAC_DATA, tmp);
udelay(500);
WREG_DAC(MGA1064_ER_PIX_PLLC_N, n);
WREG_DAC(MGA1064_ER_PIX_PLLC_M, m);
WREG_DAC(MGA1064_ER_PIX_PLLC_P, p);
udelay(50);
return 0;
}
static int mga_crtc_set_plls(struct mga_device *mdev, long clock)
{
switch(mdev->type) {
case G200_SE_A:
case G200_SE_B:
return mga_g200se_set_plls(mdev, clock);
break;
case G200_WB:
case G200_EW3:
return mga_g200wb_set_plls(mdev, clock);
break;
case G200_EV:
return mga_g200ev_set_plls(mdev, clock);
break;
case G200_EH:
case G200_EH3:
return mga_g200eh_set_plls(mdev, clock);
break;
case G200_ER:
return mga_g200er_set_plls(mdev, clock);
break;
}
return 0;
}
static void mga_g200wb_prepare(struct drm_crtc *crtc)
{
struct mga_device *mdev = crtc->dev->dev_private;
u8 tmp;
int iter_max;
/* 1- The first step is to warn the BMC of an upcoming mode change.
* We are putting the misc<0> to output.*/
WREG8(DAC_INDEX, MGA1064_GEN_IO_CTL);
tmp = RREG8(DAC_DATA);
tmp |= 0x10;
WREG_DAC(MGA1064_GEN_IO_CTL, tmp);
/* we are putting a 1 on the misc<0> line */
WREG8(DAC_INDEX, MGA1064_GEN_IO_DATA);
tmp = RREG8(DAC_DATA);
tmp |= 0x10;
WREG_DAC(MGA1064_GEN_IO_DATA, tmp);
/* 2- Second step to mask and further scan request
* This will be done by asserting the remfreqmsk bit (XSPAREREG<7>)
*/
WREG8(DAC_INDEX, MGA1064_SPAREREG);
tmp = RREG8(DAC_DATA);
tmp |= 0x80;
WREG_DAC(MGA1064_SPAREREG, tmp);
/* 3a- the third step is to verifu if there is an active scan
* We are searching for a 0 on remhsyncsts <XSPAREREG<0>)
*/
iter_max = 300;
while (!(tmp & 0x1) && iter_max) {
WREG8(DAC_INDEX, MGA1064_SPAREREG);
tmp = RREG8(DAC_DATA);
udelay(1000);
iter_max--;
}
/* 3b- this step occurs only if the remove is actually scanning
* we are waiting for the end of the frame which is a 1 on
* remvsyncsts (XSPAREREG<1>)
*/
if (iter_max) {
iter_max = 300;
while ((tmp & 0x2) && iter_max) {
WREG8(DAC_INDEX, MGA1064_SPAREREG);
tmp = RREG8(DAC_DATA);
udelay(1000);
iter_max--;
}
}
}
static void mga_g200wb_commit(struct drm_crtc *crtc)
{
u8 tmp;
struct mga_device *mdev = crtc->dev->dev_private;
/* 1- The first step is to ensure that the vrsten and hrsten are set */
WREG8(MGAREG_CRTCEXT_INDEX, 1);
tmp = RREG8(MGAREG_CRTCEXT_DATA);
WREG8(MGAREG_CRTCEXT_DATA, tmp | 0x88);
/* 2- second step is to assert the rstlvl2 */
WREG8(DAC_INDEX, MGA1064_REMHEADCTL2);
tmp = RREG8(DAC_DATA);
tmp |= 0x8;
WREG8(DAC_DATA, tmp);
/* wait 10 us */
udelay(10);
/* 3- deassert rstlvl2 */
tmp &= ~0x08;
WREG8(DAC_INDEX, MGA1064_REMHEADCTL2);
WREG8(DAC_DATA, tmp);
/* 4- remove mask of scan request */
WREG8(DAC_INDEX, MGA1064_SPAREREG);
tmp = RREG8(DAC_DATA);
tmp &= ~0x80;
WREG8(DAC_DATA, tmp);
/* 5- put back a 0 on the misc<0> line */
WREG8(DAC_INDEX, MGA1064_GEN_IO_DATA);
tmp = RREG8(DAC_DATA);
tmp &= ~0x10;
WREG_DAC(MGA1064_GEN_IO_DATA, tmp);
}
/*
This is how the framebuffer base address is stored in g200 cards:
* Assume @offset is the gpu_addr variable of the framebuffer object
* Then addr is the number of _pixels_ (not bytes) from the start of
VRAM to the first pixel we want to display. (divided by 2 for 32bit
framebuffers)
* addr is stored in the CRTCEXT0, CRTCC and CRTCD registers
addr<20> -> CRTCEXT0<6>
addr<19-16> -> CRTCEXT0<3-0>
addr<15-8> -> CRTCC<7-0>
addr<7-0> -> CRTCD<7-0>
CRTCEXT0 has to be programmed last to trigger an update and make the
new addr variable take effect.
*/
static void mga_set_start_address(struct drm_crtc *crtc, unsigned offset)
{
struct mga_device *mdev = crtc->dev->dev_private;
u32 addr;
int count;
u8 crtcext0;
while (RREG8(0x1fda) & 0x08);
while (!(RREG8(0x1fda) & 0x08));
count = RREG8(MGAREG_VCOUNT) + 2;
while (RREG8(MGAREG_VCOUNT) < count);
WREG8(MGAREG_CRTCEXT_INDEX, 0);
crtcext0 = RREG8(MGAREG_CRTCEXT_DATA);
crtcext0 &= 0xB0;
addr = offset / 8;
/* Can't store addresses any higher than that...
but we also don't have more than 16MB of memory, so it should be fine. */
WARN_ON(addr > 0x1fffff);
crtcext0 |= (!!(addr & (1<<20)))<<6;
WREG_CRT(0x0d, (u8)(addr & 0xff));
WREG_CRT(0x0c, (u8)(addr >> 8) & 0xff);
WREG_ECRT(0x0, ((u8)(addr >> 16) & 0xf) | crtcext0);
}
static int mga_crtc_do_set_base(struct drm_crtc *crtc,
struct drm_framebuffer *fb,
int x, int y, int atomic)
{
struct drm_gem_vram_object *gbo;
int ret;
s64 gpu_addr;
if (!atomic && fb) {
gbo = drm_gem_vram_of_gem(fb->obj[0]);
drm_gem_vram_unpin(gbo);
}
gbo = drm_gem_vram_of_gem(crtc->primary->fb->obj[0]);
ret = drm_gem_vram_pin(gbo, DRM_GEM_VRAM_PL_FLAG_VRAM);
if (ret)
return ret;
gpu_addr = drm_gem_vram_offset(gbo);
if (gpu_addr < 0) {
ret = (int)gpu_addr;
goto err_drm_gem_vram_unpin;
}
mga_set_start_address(crtc, (u32)gpu_addr);
return 0;
err_drm_gem_vram_unpin:
drm_gem_vram_unpin(gbo);
return ret;
}
static int mga_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
struct drm_framebuffer *old_fb)
{
return mga_crtc_do_set_base(crtc, old_fb, x, y, 0);
}
static int mga_crtc_mode_set(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode,
int x, int y, struct drm_framebuffer *old_fb)
{
struct drm_device *dev = crtc->dev;
struct mga_device *mdev = dev->dev_private;
const struct drm_framebuffer *fb = crtc->primary->fb;
int hdisplay, hsyncstart, hsyncend, htotal;
int vdisplay, vsyncstart, vsyncend, vtotal;
int pitch;
int option = 0, option2 = 0;
int i;
unsigned char misc = 0;
unsigned char ext_vga[6];
u8 bppshift;
static unsigned char dacvalue[] = {
/* 0x00: */ 0, 0, 0, 0, 0, 0, 0x00, 0,
/* 0x08: */ 0, 0, 0, 0, 0, 0, 0, 0,
/* 0x10: */ 0, 0, 0, 0, 0, 0, 0, 0,
/* 0x18: */ 0x00, 0, 0xC9, 0xFF, 0xBF, 0x20, 0x1F, 0x20,
/* 0x20: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
/* 0x28: */ 0x00, 0x00, 0x00, 0x00, 0, 0, 0, 0x40,
/* 0x30: */ 0x00, 0xB0, 0x00, 0xC2, 0x34, 0x14, 0x02, 0x83,
/* 0x38: */ 0x00, 0x93, 0x00, 0x77, 0x00, 0x00, 0x00, 0x3A,
/* 0x40: */ 0, 0, 0, 0, 0, 0, 0, 0,
/* 0x48: */ 0, 0, 0, 0, 0, 0, 0, 0
};
drm: Nuke fb->bits_per_pixel Replace uses of fb->bits_per_pixel with fb->format->cpp[0]*8. Less duplicated information is a good thing. Note that I didn't put parens around the cpp*8 in the below cocci script, on account of not wanting spurious parens all over the place. Instead I did the unsafe way, and tried to look over the entire diff to spot if any dangerous expressions were produced. I didn't see any. There are some cases where previously the code did X*bpp/8, so the division happened after the multiplication. Those are now just X*cpp so the division effectively happens before the multiplication, but that is perfectly fine since bpp is always a multiple of 8. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer FB; expression E; @@ ( - E * FB.bits_per_pixel / 8 + E * FB.format->cpp[0] | - FB.bits_per_pixel / 8 + FB.format->cpp[0] | - E * FB.bits_per_pixel >> 3 + E * FB.format->cpp[0] | - FB.bits_per_pixel >> 3 + FB.format->cpp[0] | - (FB.bits_per_pixel + 7) / 8 + FB.format->cpp[0] | - FB.bits_per_pixel + FB.format->cpp[0] * 8 | - FB.format->cpp[0] * 8 != 8 + FB.format->cpp[0] != 1 ) @@ struct drm_framebuffer *FB; expression E; @@ ( - E * FB->bits_per_pixel / 8 + E * FB->format->cpp[0] | - FB->bits_per_pixel / 8 + FB->format->cpp[0] | - E * FB->bits_per_pixel >> 3 + E * FB->format->cpp[0] | - FB->bits_per_pixel >> 3 + FB->format->cpp[0] | - (FB->bits_per_pixel + 7) / 8 + FB->format->cpp[0] | - FB->bits_per_pixel + FB->format->cpp[0] * 8 | - FB->format->cpp[0] * 8 != 8 + FB->format->cpp[0] != 1 ) @@ struct drm_plane_state *state; expression E; @@ ( - E * state->fb->bits_per_pixel / 8 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel / 8 + state->fb->format->cpp[0] | - E * state->fb->bits_per_pixel >> 3 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel >> 3 + state->fb->format->cpp[0] | - (state->fb->bits_per_pixel + 7) / 8 + state->fb->format->cpp[0] | - state->fb->bits_per_pixel + state->fb->format->cpp[0] * 8 | - state->fb->format->cpp[0] * 8 != 8 + state->fb->format->cpp[0] != 1 ) @@ @@ - (8 * 8) + 8 * 8 @@ struct drm_framebuffer FB; @@ - (FB.format->cpp[0]) + FB.format->cpp[0] @@ struct drm_framebuffer *FB; @@ - (FB->format->cpp[0]) + FB->format->cpp[0] @@ @@ struct drm_framebuffer { ... - int bits_per_pixel; ... }; v2: Clean up the 'cpp*8 != 8' and '(8 * 8)' cases (Laurent) v3: Adjusted the semantic patch a bit and regenerated due to code changes Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Link: http://patchwork.freedesktop.org/patch/msgid/1481751140-18352-1-git-send-email-ville.syrjala@linux.intel.com
2016-12-15 04:32:20 +07:00
bppshift = mdev->bpp_shifts[fb->format->cpp[0] - 1];
switch (mdev->type) {
case G200_SE_A:
case G200_SE_B:
dacvalue[MGA1064_VREF_CTL] = 0x03;
dacvalue[MGA1064_PIX_CLK_CTL] = MGA1064_PIX_CLK_CTL_SEL_PLL;
dacvalue[MGA1064_MISC_CTL] = MGA1064_MISC_CTL_DAC_EN |
MGA1064_MISC_CTL_VGA8 |
MGA1064_MISC_CTL_DAC_RAM_CS;
if (mdev->has_sdram)
option = 0x40049120;
else
option = 0x4004d120;
option2 = 0x00008000;
break;
case G200_WB:
case G200_EW3:
dacvalue[MGA1064_VREF_CTL] = 0x07;
option = 0x41049120;
option2 = 0x0000b000;
break;
case G200_EV:
dacvalue[MGA1064_PIX_CLK_CTL] = MGA1064_PIX_CLK_CTL_SEL_PLL;
dacvalue[MGA1064_MISC_CTL] = MGA1064_MISC_CTL_VGA8 |
MGA1064_MISC_CTL_DAC_RAM_CS;
option = 0x00000120;
option2 = 0x0000b000;
break;
case G200_EH:
case G200_EH3:
dacvalue[MGA1064_MISC_CTL] = MGA1064_MISC_CTL_VGA8 |
MGA1064_MISC_CTL_DAC_RAM_CS;
option = 0x00000120;
option2 = 0x0000b000;
break;
case G200_ER:
break;
}
drm: Nuke fb->bits_per_pixel Replace uses of fb->bits_per_pixel with fb->format->cpp[0]*8. Less duplicated information is a good thing. Note that I didn't put parens around the cpp*8 in the below cocci script, on account of not wanting spurious parens all over the place. Instead I did the unsafe way, and tried to look over the entire diff to spot if any dangerous expressions were produced. I didn't see any. There are some cases where previously the code did X*bpp/8, so the division happened after the multiplication. Those are now just X*cpp so the division effectively happens before the multiplication, but that is perfectly fine since bpp is always a multiple of 8. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer FB; expression E; @@ ( - E * FB.bits_per_pixel / 8 + E * FB.format->cpp[0] | - FB.bits_per_pixel / 8 + FB.format->cpp[0] | - E * FB.bits_per_pixel >> 3 + E * FB.format->cpp[0] | - FB.bits_per_pixel >> 3 + FB.format->cpp[0] | - (FB.bits_per_pixel + 7) / 8 + FB.format->cpp[0] | - FB.bits_per_pixel + FB.format->cpp[0] * 8 | - FB.format->cpp[0] * 8 != 8 + FB.format->cpp[0] != 1 ) @@ struct drm_framebuffer *FB; expression E; @@ ( - E * FB->bits_per_pixel / 8 + E * FB->format->cpp[0] | - FB->bits_per_pixel / 8 + FB->format->cpp[0] | - E * FB->bits_per_pixel >> 3 + E * FB->format->cpp[0] | - FB->bits_per_pixel >> 3 + FB->format->cpp[0] | - (FB->bits_per_pixel + 7) / 8 + FB->format->cpp[0] | - FB->bits_per_pixel + FB->format->cpp[0] * 8 | - FB->format->cpp[0] * 8 != 8 + FB->format->cpp[0] != 1 ) @@ struct drm_plane_state *state; expression E; @@ ( - E * state->fb->bits_per_pixel / 8 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel / 8 + state->fb->format->cpp[0] | - E * state->fb->bits_per_pixel >> 3 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel >> 3 + state->fb->format->cpp[0] | - (state->fb->bits_per_pixel + 7) / 8 + state->fb->format->cpp[0] | - state->fb->bits_per_pixel + state->fb->format->cpp[0] * 8 | - state->fb->format->cpp[0] * 8 != 8 + state->fb->format->cpp[0] != 1 ) @@ @@ - (8 * 8) + 8 * 8 @@ struct drm_framebuffer FB; @@ - (FB.format->cpp[0]) + FB.format->cpp[0] @@ struct drm_framebuffer *FB; @@ - (FB->format->cpp[0]) + FB->format->cpp[0] @@ @@ struct drm_framebuffer { ... - int bits_per_pixel; ... }; v2: Clean up the 'cpp*8 != 8' and '(8 * 8)' cases (Laurent) v3: Adjusted the semantic patch a bit and regenerated due to code changes Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Link: http://patchwork.freedesktop.org/patch/msgid/1481751140-18352-1-git-send-email-ville.syrjala@linux.intel.com
2016-12-15 04:32:20 +07:00
switch (fb->format->cpp[0] * 8) {
case 8:
dacvalue[MGA1064_MUL_CTL] = MGA1064_MUL_CTL_8bits;
break;
case 16:
if (fb->format->depth == 15)
dacvalue[MGA1064_MUL_CTL] = MGA1064_MUL_CTL_15bits;
else
dacvalue[MGA1064_MUL_CTL] = MGA1064_MUL_CTL_16bits;
break;
case 24:
dacvalue[MGA1064_MUL_CTL] = MGA1064_MUL_CTL_24bits;
break;
case 32:
dacvalue[MGA1064_MUL_CTL] = MGA1064_MUL_CTL_32_24bits;
break;
}
if (mode->flags & DRM_MODE_FLAG_NHSYNC)
misc |= 0x40;
if (mode->flags & DRM_MODE_FLAG_NVSYNC)
misc |= 0x80;
for (i = 0; i < sizeof(dacvalue); i++) {
if ((i <= 0x17) ||
(i == 0x1b) ||
(i == 0x1c) ||
((i >= 0x1f) && (i <= 0x29)) ||
((i >= 0x30) && (i <= 0x37)))
continue;
if (IS_G200_SE(mdev) &&
((i == 0x2c) || (i == 0x2d) || (i == 0x2e)))
continue;
if ((mdev->type == G200_EV ||
mdev->type == G200_WB ||
mdev->type == G200_EH ||
mdev->type == G200_EW3 ||
mdev->type == G200_EH3) &&
(i >= 0x44) && (i <= 0x4e))
continue;
WREG_DAC(i, dacvalue[i]);
}
if (mdev->type == G200_ER)
WREG_DAC(0x90, 0);
if (option)
pci_write_config_dword(dev->pdev, PCI_MGA_OPTION, option);
if (option2)
pci_write_config_dword(dev->pdev, PCI_MGA_OPTION2, option2);
WREG_SEQ(2, 0xf);
WREG_SEQ(3, 0);
WREG_SEQ(4, 0xe);
drm: Nuke fb->bits_per_pixel Replace uses of fb->bits_per_pixel with fb->format->cpp[0]*8. Less duplicated information is a good thing. Note that I didn't put parens around the cpp*8 in the below cocci script, on account of not wanting spurious parens all over the place. Instead I did the unsafe way, and tried to look over the entire diff to spot if any dangerous expressions were produced. I didn't see any. There are some cases where previously the code did X*bpp/8, so the division happened after the multiplication. Those are now just X*cpp so the division effectively happens before the multiplication, but that is perfectly fine since bpp is always a multiple of 8. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer FB; expression E; @@ ( - E * FB.bits_per_pixel / 8 + E * FB.format->cpp[0] | - FB.bits_per_pixel / 8 + FB.format->cpp[0] | - E * FB.bits_per_pixel >> 3 + E * FB.format->cpp[0] | - FB.bits_per_pixel >> 3 + FB.format->cpp[0] | - (FB.bits_per_pixel + 7) / 8 + FB.format->cpp[0] | - FB.bits_per_pixel + FB.format->cpp[0] * 8 | - FB.format->cpp[0] * 8 != 8 + FB.format->cpp[0] != 1 ) @@ struct drm_framebuffer *FB; expression E; @@ ( - E * FB->bits_per_pixel / 8 + E * FB->format->cpp[0] | - FB->bits_per_pixel / 8 + FB->format->cpp[0] | - E * FB->bits_per_pixel >> 3 + E * FB->format->cpp[0] | - FB->bits_per_pixel >> 3 + FB->format->cpp[0] | - (FB->bits_per_pixel + 7) / 8 + FB->format->cpp[0] | - FB->bits_per_pixel + FB->format->cpp[0] * 8 | - FB->format->cpp[0] * 8 != 8 + FB->format->cpp[0] != 1 ) @@ struct drm_plane_state *state; expression E; @@ ( - E * state->fb->bits_per_pixel / 8 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel / 8 + state->fb->format->cpp[0] | - E * state->fb->bits_per_pixel >> 3 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel >> 3 + state->fb->format->cpp[0] | - (state->fb->bits_per_pixel + 7) / 8 + state->fb->format->cpp[0] | - state->fb->bits_per_pixel + state->fb->format->cpp[0] * 8 | - state->fb->format->cpp[0] * 8 != 8 + state->fb->format->cpp[0] != 1 ) @@ @@ - (8 * 8) + 8 * 8 @@ struct drm_framebuffer FB; @@ - (FB.format->cpp[0]) + FB.format->cpp[0] @@ struct drm_framebuffer *FB; @@ - (FB->format->cpp[0]) + FB->format->cpp[0] @@ @@ struct drm_framebuffer { ... - int bits_per_pixel; ... }; v2: Clean up the 'cpp*8 != 8' and '(8 * 8)' cases (Laurent) v3: Adjusted the semantic patch a bit and regenerated due to code changes Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Link: http://patchwork.freedesktop.org/patch/msgid/1481751140-18352-1-git-send-email-ville.syrjala@linux.intel.com
2016-12-15 04:32:20 +07:00
pitch = fb->pitches[0] / fb->format->cpp[0];
if (fb->format->cpp[0] * 8 == 24)
pitch = (pitch * 3) >> (4 - bppshift);
else
pitch = pitch >> (4 - bppshift);
hdisplay = mode->hdisplay / 8 - 1;
hsyncstart = mode->hsync_start / 8 - 1;
hsyncend = mode->hsync_end / 8 - 1;
htotal = mode->htotal / 8 - 1;
/* Work around hardware quirk */
if ((htotal & 0x07) == 0x06 || (htotal & 0x07) == 0x04)
htotal++;
vdisplay = mode->vdisplay - 1;
vsyncstart = mode->vsync_start - 1;
vsyncend = mode->vsync_end - 1;
vtotal = mode->vtotal - 2;
WREG_GFX(0, 0);
WREG_GFX(1, 0);
WREG_GFX(2, 0);
WREG_GFX(3, 0);
WREG_GFX(4, 0);
WREG_GFX(5, 0x40);
WREG_GFX(6, 0x5);
WREG_GFX(7, 0xf);
WREG_GFX(8, 0xf);
WREG_CRT(0, htotal - 4);
WREG_CRT(1, hdisplay);
WREG_CRT(2, hdisplay);
WREG_CRT(3, (htotal & 0x1F) | 0x80);
WREG_CRT(4, hsyncstart);
WREG_CRT(5, ((htotal & 0x20) << 2) | (hsyncend & 0x1F));
WREG_CRT(6, vtotal & 0xFF);
WREG_CRT(7, ((vtotal & 0x100) >> 8) |
((vdisplay & 0x100) >> 7) |
((vsyncstart & 0x100) >> 6) |
((vdisplay & 0x100) >> 5) |
((vdisplay & 0x100) >> 4) | /* linecomp */
((vtotal & 0x200) >> 4)|
((vdisplay & 0x200) >> 3) |
((vsyncstart & 0x200) >> 2));
WREG_CRT(9, ((vdisplay & 0x200) >> 4) |
((vdisplay & 0x200) >> 3));
WREG_CRT(10, 0);
WREG_CRT(11, 0);
WREG_CRT(12, 0);
WREG_CRT(13, 0);
WREG_CRT(14, 0);
WREG_CRT(15, 0);
WREG_CRT(16, vsyncstart & 0xFF);
WREG_CRT(17, (vsyncend & 0x0F) | 0x20);
WREG_CRT(18, vdisplay & 0xFF);
WREG_CRT(19, pitch & 0xFF);
WREG_CRT(20, 0);
WREG_CRT(21, vdisplay & 0xFF);
WREG_CRT(22, (vtotal + 1) & 0xFF);
WREG_CRT(23, 0xc3);
WREG_CRT(24, vdisplay & 0xFF);
ext_vga[0] = 0;
ext_vga[5] = 0;
/* TODO interlace */
ext_vga[0] |= (pitch & 0x300) >> 4;
ext_vga[1] = (((htotal - 4) & 0x100) >> 8) |
((hdisplay & 0x100) >> 7) |
((hsyncstart & 0x100) >> 6) |
(htotal & 0x40);
ext_vga[2] = ((vtotal & 0xc00) >> 10) |
((vdisplay & 0x400) >> 8) |
((vdisplay & 0xc00) >> 7) |
((vsyncstart & 0xc00) >> 5) |
((vdisplay & 0x400) >> 3);
drm: Nuke fb->bits_per_pixel Replace uses of fb->bits_per_pixel with fb->format->cpp[0]*8. Less duplicated information is a good thing. Note that I didn't put parens around the cpp*8 in the below cocci script, on account of not wanting spurious parens all over the place. Instead I did the unsafe way, and tried to look over the entire diff to spot if any dangerous expressions were produced. I didn't see any. There are some cases where previously the code did X*bpp/8, so the division happened after the multiplication. Those are now just X*cpp so the division effectively happens before the multiplication, but that is perfectly fine since bpp is always a multiple of 8. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer FB; expression E; @@ ( - E * FB.bits_per_pixel / 8 + E * FB.format->cpp[0] | - FB.bits_per_pixel / 8 + FB.format->cpp[0] | - E * FB.bits_per_pixel >> 3 + E * FB.format->cpp[0] | - FB.bits_per_pixel >> 3 + FB.format->cpp[0] | - (FB.bits_per_pixel + 7) / 8 + FB.format->cpp[0] | - FB.bits_per_pixel + FB.format->cpp[0] * 8 | - FB.format->cpp[0] * 8 != 8 + FB.format->cpp[0] != 1 ) @@ struct drm_framebuffer *FB; expression E; @@ ( - E * FB->bits_per_pixel / 8 + E * FB->format->cpp[0] | - FB->bits_per_pixel / 8 + FB->format->cpp[0] | - E * FB->bits_per_pixel >> 3 + E * FB->format->cpp[0] | - FB->bits_per_pixel >> 3 + FB->format->cpp[0] | - (FB->bits_per_pixel + 7) / 8 + FB->format->cpp[0] | - FB->bits_per_pixel + FB->format->cpp[0] * 8 | - FB->format->cpp[0] * 8 != 8 + FB->format->cpp[0] != 1 ) @@ struct drm_plane_state *state; expression E; @@ ( - E * state->fb->bits_per_pixel / 8 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel / 8 + state->fb->format->cpp[0] | - E * state->fb->bits_per_pixel >> 3 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel >> 3 + state->fb->format->cpp[0] | - (state->fb->bits_per_pixel + 7) / 8 + state->fb->format->cpp[0] | - state->fb->bits_per_pixel + state->fb->format->cpp[0] * 8 | - state->fb->format->cpp[0] * 8 != 8 + state->fb->format->cpp[0] != 1 ) @@ @@ - (8 * 8) + 8 * 8 @@ struct drm_framebuffer FB; @@ - (FB.format->cpp[0]) + FB.format->cpp[0] @@ struct drm_framebuffer *FB; @@ - (FB->format->cpp[0]) + FB->format->cpp[0] @@ @@ struct drm_framebuffer { ... - int bits_per_pixel; ... }; v2: Clean up the 'cpp*8 != 8' and '(8 * 8)' cases (Laurent) v3: Adjusted the semantic patch a bit and regenerated due to code changes Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Link: http://patchwork.freedesktop.org/patch/msgid/1481751140-18352-1-git-send-email-ville.syrjala@linux.intel.com
2016-12-15 04:32:20 +07:00
if (fb->format->cpp[0] * 8 == 24)
ext_vga[3] = (((1 << bppshift) * 3) - 1) | 0x80;
else
ext_vga[3] = ((1 << bppshift) - 1) | 0x80;
ext_vga[4] = 0;
if (mdev->type == G200_WB || mdev->type == G200_EW3)
ext_vga[1] |= 0x88;
/* Set pixel clocks */
misc = 0x2d;
WREG8(MGA_MISC_OUT, misc);
mga_crtc_set_plls(mdev, mode->clock);
for (i = 0; i < 6; i++) {
WREG_ECRT(i, ext_vga[i]);
}
if (mdev->type == G200_ER)
WREG_ECRT(0x24, 0x5);
if (mdev->type == G200_EW3)
WREG_ECRT(0x34, 0x5);
if (mdev->type == G200_EV) {
WREG_ECRT(6, 0);
}
WREG_ECRT(0, ext_vga[0]);
/* Enable mga pixel clock */
misc = 0x2d;
WREG8(MGA_MISC_OUT, misc);
if (adjusted_mode)
memcpy(&mdev->mode, mode, sizeof(struct drm_display_mode));
mga_crtc_do_set_base(crtc, old_fb, x, y, 0);
/* reset tagfifo */
if (mdev->type == G200_ER) {
u32 mem_ctl = RREG32(MGAREG_MEMCTL);
u8 seq1;
/* screen off */
WREG8(MGAREG_SEQ_INDEX, 0x01);
seq1 = RREG8(MGAREG_SEQ_DATA) | 0x20;
WREG8(MGAREG_SEQ_DATA, seq1);
WREG32(MGAREG_MEMCTL, mem_ctl | 0x00200000);
udelay(1000);
WREG32(MGAREG_MEMCTL, mem_ctl & ~0x00200000);
WREG8(MGAREG_SEQ_DATA, seq1 & ~0x20);
}
if (IS_G200_SE(mdev)) {
if (mdev->unique_rev_id >= 0x04) {
WREG8(MGAREG_CRTCEXT_INDEX, 0x06);
WREG8(MGAREG_CRTCEXT_DATA, 0);
} else if (mdev->unique_rev_id >= 0x02) {
u8 hi_pri_lvl;
u32 bpp;
u32 mb;
drm: Nuke fb->bits_per_pixel Replace uses of fb->bits_per_pixel with fb->format->cpp[0]*8. Less duplicated information is a good thing. Note that I didn't put parens around the cpp*8 in the below cocci script, on account of not wanting spurious parens all over the place. Instead I did the unsafe way, and tried to look over the entire diff to spot if any dangerous expressions were produced. I didn't see any. There are some cases where previously the code did X*bpp/8, so the division happened after the multiplication. Those are now just X*cpp so the division effectively happens before the multiplication, but that is perfectly fine since bpp is always a multiple of 8. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer FB; expression E; @@ ( - E * FB.bits_per_pixel / 8 + E * FB.format->cpp[0] | - FB.bits_per_pixel / 8 + FB.format->cpp[0] | - E * FB.bits_per_pixel >> 3 + E * FB.format->cpp[0] | - FB.bits_per_pixel >> 3 + FB.format->cpp[0] | - (FB.bits_per_pixel + 7) / 8 + FB.format->cpp[0] | - FB.bits_per_pixel + FB.format->cpp[0] * 8 | - FB.format->cpp[0] * 8 != 8 + FB.format->cpp[0] != 1 ) @@ struct drm_framebuffer *FB; expression E; @@ ( - E * FB->bits_per_pixel / 8 + E * FB->format->cpp[0] | - FB->bits_per_pixel / 8 + FB->format->cpp[0] | - E * FB->bits_per_pixel >> 3 + E * FB->format->cpp[0] | - FB->bits_per_pixel >> 3 + FB->format->cpp[0] | - (FB->bits_per_pixel + 7) / 8 + FB->format->cpp[0] | - FB->bits_per_pixel + FB->format->cpp[0] * 8 | - FB->format->cpp[0] * 8 != 8 + FB->format->cpp[0] != 1 ) @@ struct drm_plane_state *state; expression E; @@ ( - E * state->fb->bits_per_pixel / 8 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel / 8 + state->fb->format->cpp[0] | - E * state->fb->bits_per_pixel >> 3 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel >> 3 + state->fb->format->cpp[0] | - (state->fb->bits_per_pixel + 7) / 8 + state->fb->format->cpp[0] | - state->fb->bits_per_pixel + state->fb->format->cpp[0] * 8 | - state->fb->format->cpp[0] * 8 != 8 + state->fb->format->cpp[0] != 1 ) @@ @@ - (8 * 8) + 8 * 8 @@ struct drm_framebuffer FB; @@ - (FB.format->cpp[0]) + FB.format->cpp[0] @@ struct drm_framebuffer *FB; @@ - (FB->format->cpp[0]) + FB->format->cpp[0] @@ @@ struct drm_framebuffer { ... - int bits_per_pixel; ... }; v2: Clean up the 'cpp*8 != 8' and '(8 * 8)' cases (Laurent) v3: Adjusted the semantic patch a bit and regenerated due to code changes Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Link: http://patchwork.freedesktop.org/patch/msgid/1481751140-18352-1-git-send-email-ville.syrjala@linux.intel.com
2016-12-15 04:32:20 +07:00
if (fb->format->cpp[0] * 8 > 16)
bpp = 32;
drm: Nuke fb->bits_per_pixel Replace uses of fb->bits_per_pixel with fb->format->cpp[0]*8. Less duplicated information is a good thing. Note that I didn't put parens around the cpp*8 in the below cocci script, on account of not wanting spurious parens all over the place. Instead I did the unsafe way, and tried to look over the entire diff to spot if any dangerous expressions were produced. I didn't see any. There are some cases where previously the code did X*bpp/8, so the division happened after the multiplication. Those are now just X*cpp so the division effectively happens before the multiplication, but that is perfectly fine since bpp is always a multiple of 8. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer FB; expression E; @@ ( - E * FB.bits_per_pixel / 8 + E * FB.format->cpp[0] | - FB.bits_per_pixel / 8 + FB.format->cpp[0] | - E * FB.bits_per_pixel >> 3 + E * FB.format->cpp[0] | - FB.bits_per_pixel >> 3 + FB.format->cpp[0] | - (FB.bits_per_pixel + 7) / 8 + FB.format->cpp[0] | - FB.bits_per_pixel + FB.format->cpp[0] * 8 | - FB.format->cpp[0] * 8 != 8 + FB.format->cpp[0] != 1 ) @@ struct drm_framebuffer *FB; expression E; @@ ( - E * FB->bits_per_pixel / 8 + E * FB->format->cpp[0] | - FB->bits_per_pixel / 8 + FB->format->cpp[0] | - E * FB->bits_per_pixel >> 3 + E * FB->format->cpp[0] | - FB->bits_per_pixel >> 3 + FB->format->cpp[0] | - (FB->bits_per_pixel + 7) / 8 + FB->format->cpp[0] | - FB->bits_per_pixel + FB->format->cpp[0] * 8 | - FB->format->cpp[0] * 8 != 8 + FB->format->cpp[0] != 1 ) @@ struct drm_plane_state *state; expression E; @@ ( - E * state->fb->bits_per_pixel / 8 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel / 8 + state->fb->format->cpp[0] | - E * state->fb->bits_per_pixel >> 3 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel >> 3 + state->fb->format->cpp[0] | - (state->fb->bits_per_pixel + 7) / 8 + state->fb->format->cpp[0] | - state->fb->bits_per_pixel + state->fb->format->cpp[0] * 8 | - state->fb->format->cpp[0] * 8 != 8 + state->fb->format->cpp[0] != 1 ) @@ @@ - (8 * 8) + 8 * 8 @@ struct drm_framebuffer FB; @@ - (FB.format->cpp[0]) + FB.format->cpp[0] @@ struct drm_framebuffer *FB; @@ - (FB->format->cpp[0]) + FB->format->cpp[0] @@ @@ struct drm_framebuffer { ... - int bits_per_pixel; ... }; v2: Clean up the 'cpp*8 != 8' and '(8 * 8)' cases (Laurent) v3: Adjusted the semantic patch a bit and regenerated due to code changes Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Link: http://patchwork.freedesktop.org/patch/msgid/1481751140-18352-1-git-send-email-ville.syrjala@linux.intel.com
2016-12-15 04:32:20 +07:00
else if (fb->format->cpp[0] * 8 > 8)
bpp = 16;
else
bpp = 8;
mb = (mode->clock * bpp) / 1000;
if (mb > 3100)
hi_pri_lvl = 0;
else if (mb > 2600)
hi_pri_lvl = 1;
else if (mb > 1900)
hi_pri_lvl = 2;
else if (mb > 1160)
hi_pri_lvl = 3;
else if (mb > 440)
hi_pri_lvl = 4;
else
hi_pri_lvl = 5;
WREG8(MGAREG_CRTCEXT_INDEX, 0x06);
WREG8(MGAREG_CRTCEXT_DATA, hi_pri_lvl);
} else {
WREG8(MGAREG_CRTCEXT_INDEX, 0x06);
if (mdev->unique_rev_id >= 0x01)
WREG8(MGAREG_CRTCEXT_DATA, 0x03);
else
WREG8(MGAREG_CRTCEXT_DATA, 0x04);
}
}
return 0;
}
#if 0 /* code from mjg to attempt D3 on crtc dpms off - revisit later */
static int mga_suspend(struct drm_crtc *crtc)
{
struct mga_crtc *mga_crtc = to_mga_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct mga_device *mdev = dev->dev_private;
struct pci_dev *pdev = dev->pdev;
int option;
if (mdev->suspended)
return 0;
WREG_SEQ(1, 0x20);
WREG_ECRT(1, 0x30);
/* Disable the pixel clock */
WREG_DAC(0x1a, 0x05);
/* Power down the DAC */
WREG_DAC(0x1e, 0x18);
/* Power down the pixel PLL */
WREG_DAC(0x1a, 0x0d);
/* Disable PLLs and clocks */
pci_read_config_dword(pdev, PCI_MGA_OPTION, &option);
option &= ~(0x1F8024);
pci_write_config_dword(pdev, PCI_MGA_OPTION, option);
pci_set_power_state(pdev, PCI_D3hot);
pci_disable_device(pdev);
mdev->suspended = true;
return 0;
}
static int mga_resume(struct drm_crtc *crtc)
{
struct mga_crtc *mga_crtc = to_mga_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct mga_device *mdev = dev->dev_private;
struct pci_dev *pdev = dev->pdev;
int option;
if (!mdev->suspended)
return 0;
pci_set_power_state(pdev, PCI_D0);
pci_enable_device(pdev);
/* Disable sysclk */
pci_read_config_dword(pdev, PCI_MGA_OPTION, &option);
option &= ~(0x4);
pci_write_config_dword(pdev, PCI_MGA_OPTION, option);
mdev->suspended = false;
return 0;
}
#endif
static void mga_crtc_dpms(struct drm_crtc *crtc, int mode)
{
struct drm_device *dev = crtc->dev;
struct mga_device *mdev = dev->dev_private;
u8 seq1 = 0, crtcext1 = 0;
switch (mode) {
case DRM_MODE_DPMS_ON:
seq1 = 0;
crtcext1 = 0;
mga_crtc_load_lut(crtc);
break;
case DRM_MODE_DPMS_STANDBY:
seq1 = 0x20;
crtcext1 = 0x10;
break;
case DRM_MODE_DPMS_SUSPEND:
seq1 = 0x20;
crtcext1 = 0x20;
break;
case DRM_MODE_DPMS_OFF:
seq1 = 0x20;
crtcext1 = 0x30;
break;
}
#if 0
if (mode == DRM_MODE_DPMS_OFF) {
mga_suspend(crtc);
}
#endif
WREG8(MGAREG_SEQ_INDEX, 0x01);
seq1 |= RREG8(MGAREG_SEQ_DATA) & ~0x20;
mga_wait_vsync(mdev);
mga_wait_busy(mdev);
WREG8(MGAREG_SEQ_DATA, seq1);
msleep(20);
WREG8(MGAREG_CRTCEXT_INDEX, 0x01);
crtcext1 |= RREG8(MGAREG_CRTCEXT_DATA) & ~0x30;
WREG8(MGAREG_CRTCEXT_DATA, crtcext1);
#if 0
if (mode == DRM_MODE_DPMS_ON && mdev->suspended == true) {
mga_resume(crtc);
drm_helper_resume_force_mode(dev);
}
#endif
}
/*
* This is called before a mode is programmed. A typical use might be to
* enable DPMS during the programming to avoid seeing intermediate stages,
* but that's not relevant to us
*/
static void mga_crtc_prepare(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct mga_device *mdev = dev->dev_private;
u8 tmp;
/* mga_resume(crtc);*/
WREG8(MGAREG_CRTC_INDEX, 0x11);
tmp = RREG8(MGAREG_CRTC_DATA);
WREG_CRT(0x11, tmp | 0x80);
if (mdev->type == G200_SE_A || mdev->type == G200_SE_B) {
WREG_SEQ(0, 1);
msleep(50);
WREG_SEQ(1, 0x20);
msleep(20);
} else {
WREG8(MGAREG_SEQ_INDEX, 0x1);
tmp = RREG8(MGAREG_SEQ_DATA);
/* start sync reset */
WREG_SEQ(0, 1);
WREG_SEQ(1, tmp | 0x20);
}
if (mdev->type == G200_WB || mdev->type == G200_EW3)
mga_g200wb_prepare(crtc);
WREG_CRT(17, 0);
}
/*
* This is called after a mode is programmed. It should reverse anything done
* by the prepare function
*/
static void mga_crtc_commit(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct mga_device *mdev = dev->dev_private;
const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
u8 tmp;
if (mdev->type == G200_WB || mdev->type == G200_EW3)
mga_g200wb_commit(crtc);
if (mdev->type == G200_SE_A || mdev->type == G200_SE_B) {
msleep(50);
WREG_SEQ(1, 0x0);
msleep(20);
WREG_SEQ(0, 0x3);
} else {
WREG8(MGAREG_SEQ_INDEX, 0x1);
tmp = RREG8(MGAREG_SEQ_DATA);
tmp &= ~0x20;
WREG_SEQ(0x1, tmp);
WREG_SEQ(0, 3);
}
crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
}
/*
* The core can pass us a set of gamma values to program. We actually only
* use this for 8-bit mode so can't perform smooth fades on deeper modes,
* but it's a requirement that we provide the function
*/
static int mga_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
u16 *blue, uint32_t size,
struct drm_modeset_acquire_ctx *ctx)
{
mga_crtc_load_lut(crtc);
return 0;
}
/* Simple cleanup function */
static void mga_crtc_destroy(struct drm_crtc *crtc)
{
struct mga_crtc *mga_crtc = to_mga_crtc(crtc);
drm_crtc_cleanup(crtc);
kfree(mga_crtc);
}
static void mga_crtc_disable(struct drm_crtc *crtc)
{
DRM_DEBUG_KMS("\n");
mga_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
if (crtc->primary->fb) {
struct drm_framebuffer *fb = crtc->primary->fb;
struct drm_gem_vram_object *gbo =
drm_gem_vram_of_gem(fb->obj[0]);
drm_gem_vram_unpin(gbo);
}
crtc->primary->fb = NULL;
}
/* These provide the minimum set of functions required to handle a CRTC */
static const struct drm_crtc_funcs mga_crtc_funcs = {
drm/mgag200: Hardware cursor support G200 cards support, at best, 16 colour palleted images for the cursor so we do a conversion in the cursor_set function, and reject cursors with more than 16 colours, or cursors with partial transparency. Xorg falls back gracefully to software cursors in this case. We can't disable/enable the cursor hardware without causing momentary corruption around the cursor. Instead, once the cursor is on we leave it on, and simulate turning the cursor off by moving it offscreen. This works well. Since we can't disable -> update -> enable the cursors, we double buffer cursor icons, then just move the base address that points to the old cursor, to the new. This also works well, but uses an extra page of memory. The cursor buffers are lazily-allocated on first cursor_set. This is to make sure they don't take priority over any framebuffers in case of limited memory. Here is a representation of how the bitmap for the cursor is mapped in G200 memory : Each line of color cursor use 6 Slices of 8 bytes. Slices 0 to 3 are used for the 4bpp bitmap, slice 4 for XOR mask and slice 5 for AND mask. Each line has the following format: // Byte 0 Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7 // // S0: P00-01 P02-03 P04-05 P06-07 P08-09 P10-11 P12-13 P14-15 // S1: P16-17 P18-19 P20-21 P22-23 P24-25 P26-27 P28-29 P30-31 // S2: P32-33 P34-35 P36-37 P38-39 P40-41 P42-43 P44-45 P46-47 // S3: P48-49 P50-51 P52-53 P54-55 P56-57 P58-59 P60-61 P62-63 // S4: X63-56 X55-48 X47-40 X39-32 X31-24 X23-16 X15-08 X07-00 // S5: A63-56 A55-48 A47-40 A39-32 A31-24 A23-16 A15-08 A07-00 // // S0 to S5 = Slices 0 to 5 // P00 to P63 = Bitmap - pixels 0 to 63 // X00 to X63 = always 0 - pixels 0 to 63 // A00 to A63 = transparent markers - pixels 0 to 63 // 1 means colour, 0 means transparent Signed-off-by: Christopher Harvey <charvey@matrox.com> Signed-off-by: Mathieu Larouche <mathieu.larouche@matrox.com> Acked-by: Julia Lemire <jlemire@matrox.com> Tested-by: Julia Lemire <jlemire@matrox.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-06-06 02:24:26 +07:00
.cursor_set = mga_crtc_cursor_set,
.cursor_move = mga_crtc_cursor_move,
.gamma_set = mga_crtc_gamma_set,
.set_config = drm_crtc_helper_set_config,
.destroy = mga_crtc_destroy,
};
static const struct drm_crtc_helper_funcs mga_helper_funcs = {
.disable = mga_crtc_disable,
.dpms = mga_crtc_dpms,
.mode_set = mga_crtc_mode_set,
.mode_set_base = mga_crtc_mode_set_base,
.prepare = mga_crtc_prepare,
.commit = mga_crtc_commit,
};
/* CRTC setup */
static void mga_crtc_init(struct mga_device *mdev)
{
struct mga_crtc *mga_crtc;
mga_crtc = kzalloc(sizeof(struct mga_crtc) +
(MGAG200FB_CONN_LIMIT * sizeof(struct drm_connector *)),
GFP_KERNEL);
if (mga_crtc == NULL)
return;
drm_crtc_init(mdev->dev, &mga_crtc->base, &mga_crtc_funcs);
drm_mode_crtc_set_gamma_size(&mga_crtc->base, MGAG200_LUT_SIZE);
mdev->mode_info.crtc = mga_crtc;
drm_crtc_helper_add(&mga_crtc->base, &mga_helper_funcs);
}
/*
* The encoder comes after the CRTC in the output pipeline, but before
* the connector. It's responsible for ensuring that the digital
* stream is appropriately converted into the output format. Setup is
* very simple in this case - all we have to do is inform qemu of the
* colour depth in order to ensure that it displays appropriately
*/
/*
* These functions are analagous to those in the CRTC code, but are intended
* to handle any encoder-specific limitations
*/
static void mga_encoder_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
}
static void mga_encoder_dpms(struct drm_encoder *encoder, int state)
{
return;
}
static void mga_encoder_prepare(struct drm_encoder *encoder)
{
}
static void mga_encoder_commit(struct drm_encoder *encoder)
{
}
static void mga_encoder_destroy(struct drm_encoder *encoder)
{
struct mga_encoder *mga_encoder = to_mga_encoder(encoder);
drm_encoder_cleanup(encoder);
kfree(mga_encoder);
}
static const struct drm_encoder_helper_funcs mga_encoder_helper_funcs = {
.dpms = mga_encoder_dpms,
.mode_set = mga_encoder_mode_set,
.prepare = mga_encoder_prepare,
.commit = mga_encoder_commit,
};
static const struct drm_encoder_funcs mga_encoder_encoder_funcs = {
.destroy = mga_encoder_destroy,
};
static struct drm_encoder *mga_encoder_init(struct drm_device *dev)
{
struct drm_encoder *encoder;
struct mga_encoder *mga_encoder;
mga_encoder = kzalloc(sizeof(struct mga_encoder), GFP_KERNEL);
if (!mga_encoder)
return NULL;
encoder = &mga_encoder->base;
encoder->possible_crtcs = 0x1;
drm_encoder_init(dev, encoder, &mga_encoder_encoder_funcs,
DRM_MODE_ENCODER_DAC, NULL);
drm_encoder_helper_add(encoder, &mga_encoder_helper_funcs);
return encoder;
}
static int mga_vga_get_modes(struct drm_connector *connector)
{
struct mga_connector *mga_connector = to_mga_connector(connector);
struct edid *edid;
int ret = 0;
edid = drm_get_edid(connector, &mga_connector->i2c->adapter);
if (edid) {
drm_connector_update_edid_property(connector, edid);
ret = drm_add_edid_modes(connector, edid);
kfree(edid);
}
return ret;
}
static uint32_t mga_vga_calculate_mode_bandwidth(struct drm_display_mode *mode,
int bits_per_pixel)
{
uint32_t total_area, divisor;
uint64_t active_area, pixels_per_second, bandwidth;
uint64_t bytes_per_pixel = (bits_per_pixel + 7) / 8;
divisor = 1024;
if (!mode->htotal || !mode->vtotal || !mode->clock)
return 0;
active_area = mode->hdisplay * mode->vdisplay;
total_area = mode->htotal * mode->vtotal;
pixels_per_second = active_area * mode->clock * 1000;
do_div(pixels_per_second, total_area);
bandwidth = pixels_per_second * bytes_per_pixel * 100;
do_div(bandwidth, divisor);
return (uint32_t)(bandwidth);
}
#define MODE_BANDWIDTH MODE_BAD
static enum drm_mode_status mga_vga_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
struct drm_device *dev = connector->dev;
struct mga_device *mdev = (struct mga_device*)dev->dev_private;
int bpp = 32;
if (IS_G200_SE(mdev)) {
if (mdev->unique_rev_id == 0x01) {
if (mode->hdisplay > 1600)
return MODE_VIRTUAL_X;
if (mode->vdisplay > 1200)
return MODE_VIRTUAL_Y;
if (mga_vga_calculate_mode_bandwidth(mode, bpp)
> (24400 * 1024))
return MODE_BANDWIDTH;
} else if (mdev->unique_rev_id == 0x02) {
if (mode->hdisplay > 1920)
return MODE_VIRTUAL_X;
if (mode->vdisplay > 1200)
return MODE_VIRTUAL_Y;
if (mga_vga_calculate_mode_bandwidth(mode, bpp)
> (30100 * 1024))
return MODE_BANDWIDTH;
} else {
if (mga_vga_calculate_mode_bandwidth(mode, bpp)
> (55000 * 1024))
return MODE_BANDWIDTH;
}
} else if (mdev->type == G200_WB) {
if (mode->hdisplay > 1280)
return MODE_VIRTUAL_X;
if (mode->vdisplay > 1024)
return MODE_VIRTUAL_Y;
if (mga_vga_calculate_mode_bandwidth(mode, bpp) >
(31877 * 1024))
return MODE_BANDWIDTH;
} else if (mdev->type == G200_EV &&
(mga_vga_calculate_mode_bandwidth(mode, bpp)
> (32700 * 1024))) {
return MODE_BANDWIDTH;
} else if (mdev->type == G200_EH &&
(mga_vga_calculate_mode_bandwidth(mode, bpp)
> (37500 * 1024))) {
return MODE_BANDWIDTH;
} else if (mdev->type == G200_ER &&
(mga_vga_calculate_mode_bandwidth(mode,
bpp) > (55000 * 1024))) {
return MODE_BANDWIDTH;
}
if ((mode->hdisplay % 8) != 0 || (mode->hsync_start % 8) != 0 ||
(mode->hsync_end % 8) != 0 || (mode->htotal % 8) != 0) {
return MODE_H_ILLEGAL;
}
if (mode->crtc_hdisplay > 2048 || mode->crtc_hsync_start > 4096 ||
mode->crtc_hsync_end > 4096 || mode->crtc_htotal > 4096 ||
mode->crtc_vdisplay > 2048 || mode->crtc_vsync_start > 4096 ||
mode->crtc_vsync_end > 4096 || mode->crtc_vtotal > 4096) {
return MODE_BAD;
}
/* Validate the mode input by the user */
drm: Perform cmdline mode parsing during connector initialisation i915.ko has a custom fbdev initialisation routine that aims to preserve the current mode set by the BIOS, unless overruled by the user. The user's wishes are determined by what, if any, mode is specified on the command line (via the video= parameter). However, that command line mode is first parsed by drm_fb_helper_initial_config() which is called after i915.ko's custom initial_config() as a fallback method. So in order for us to honour it, we need to move the cmdline parser earlier. If we perform the connector cmdline parsing as soon as we initialise the connector, that cmdline mode and forced status is then available even if the fbdev helper is not compiled in or never called. We also then expose the cmdline user mode in the connector mode lists. v2: Rebase after connector->name upheaval. v3: Adapt mga200 to look for the cmdline mode in the new place. Nicely simplifies things while at that. v4: Fix checkpatch. v5: Select FB_CMDLINE to adapt to the changed fbdev patch. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73154 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v2) Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v2) Cc: dri-devel@lists.freedesktop.org Cc: Julia Lemire <jlemire@matrox.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-08-06 15:08:32 +07:00
if (connector->cmdline_mode.specified) {
if (connector->cmdline_mode.bpp_specified)
bpp = connector->cmdline_mode.bpp;
}
if ((mode->hdisplay * mode->vdisplay * (bpp/8)) > mdev->mc.vram_size) {
drm: Perform cmdline mode parsing during connector initialisation i915.ko has a custom fbdev initialisation routine that aims to preserve the current mode set by the BIOS, unless overruled by the user. The user's wishes are determined by what, if any, mode is specified on the command line (via the video= parameter). However, that command line mode is first parsed by drm_fb_helper_initial_config() which is called after i915.ko's custom initial_config() as a fallback method. So in order for us to honour it, we need to move the cmdline parser earlier. If we perform the connector cmdline parsing as soon as we initialise the connector, that cmdline mode and forced status is then available even if the fbdev helper is not compiled in or never called. We also then expose the cmdline user mode in the connector mode lists. v2: Rebase after connector->name upheaval. v3: Adapt mga200 to look for the cmdline mode in the new place. Nicely simplifies things while at that. v4: Fix checkpatch. v5: Select FB_CMDLINE to adapt to the changed fbdev patch. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73154 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v2) Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v2) Cc: dri-devel@lists.freedesktop.org Cc: Julia Lemire <jlemire@matrox.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-08-06 15:08:32 +07:00
if (connector->cmdline_mode.specified)
connector->cmdline_mode.specified = false;
return MODE_BAD;
}
return MODE_OK;
}
static struct drm_encoder *mga_connector_best_encoder(struct drm_connector
*connector)
{
int enc_id = connector->encoder_ids[0];
/* pick the encoder ids */
if (enc_id)
return drm_encoder_find(connector->dev, NULL, enc_id);
return NULL;
}
static void mga_connector_destroy(struct drm_connector *connector)
{
struct mga_connector *mga_connector = to_mga_connector(connector);
mgag200_i2c_destroy(mga_connector->i2c);
drm_connector_cleanup(connector);
kfree(connector);
}
static const struct drm_connector_helper_funcs mga_vga_connector_helper_funcs = {
.get_modes = mga_vga_get_modes,
.mode_valid = mga_vga_mode_valid,
.best_encoder = mga_connector_best_encoder,
};
static const struct drm_connector_funcs mga_vga_connector_funcs = {
.dpms = drm_helper_connector_dpms,
.fill_modes = drm_helper_probe_single_connector_modes,
.destroy = mga_connector_destroy,
};
static struct drm_connector *mga_vga_init(struct drm_device *dev)
{
struct drm_connector *connector;
struct mga_connector *mga_connector;
mga_connector = kzalloc(sizeof(struct mga_connector), GFP_KERNEL);
if (!mga_connector)
return NULL;
connector = &mga_connector->base;
drm_connector_init(dev, connector,
&mga_vga_connector_funcs, DRM_MODE_CONNECTOR_VGA);
drm_connector_helper_add(connector, &mga_vga_connector_helper_funcs);
drm_connector_register(connector);
mga_connector->i2c = mgag200_i2c_create(dev);
if (!mga_connector->i2c)
DRM_ERROR("failed to add ddc bus\n");
return connector;
}
int mgag200_modeset_init(struct mga_device *mdev)
{
struct drm_encoder *encoder;
struct drm_connector *connector;
mdev->mode_info.mode_config_initialized = true;
mdev->dev->mode_config.max_width = MGAG200_MAX_FB_WIDTH;
mdev->dev->mode_config.max_height = MGAG200_MAX_FB_HEIGHT;
mdev->dev->mode_config.fb_base = mdev->mc.vram_base;
mga_crtc_init(mdev);
encoder = mga_encoder_init(mdev->dev);
if (!encoder) {
DRM_ERROR("mga_encoder_init failed\n");
return -1;
}
connector = mga_vga_init(mdev->dev);
if (!connector) {
DRM_ERROR("mga_vga_init failed\n");
return -1;
}
drm_connector_attach_encoder(connector, encoder);
return 0;
}
void mgag200_modeset_fini(struct mga_device *mdev)
{
}