linux_dsm_epyc7002/arch/arm/boot/dts/am335x-boneblack.dts

// SPDX-License-Identifier: GPL-2.0-only
/*
 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
 */
/dts-v1/;

#include "am33xx.dtsi"
#include "am335x-bone-common.dtsi"
#include "am335x-boneblack-common.dtsi"

/ {
	model = "TI AM335x BeagleBone Black";
	compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
};

&cpu0_opp_table {
	/*
	 * All PG 2.0 silicon may not support 1GHz but some of the early
	 * BeagleBone Blacks have PG 2.0 silicon which is guaranteed
	 * to support 1GHz OPP so enable it for PG 2.0 on this board.
	 */
	oppnitro-1000000000 {
		opp-supported-hw = <0x06 0x0100>;
	};
};
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2019-06-04 15:11:33 +07:00			`// SPDX-License-Identifier: GPL-2.0-only`
ARM: dts: am335x-bone*: add DT for BeagleBone Black The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI added, so create a common dtsi both can use. IMPORTANT: booting the existing am335x-bone.dts will blow up the HDMI transceiver after a dozen boots with an uSD card inserted because LDO will be at 3.3V instead of 1.8. MMC support for AM335x still isn't in, so only the LDO change has been added. Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Tested-by: Tom Rini <trini@ti.com> Tested-by: Matt Porter <matt.porter@linaro.org> Acked-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Tested-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com> 2013-09-09 21:29:21 +07:00			`/*`
			`* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/`
			`*/`
			`/dts-v1/;`

			`#include "am33xx.dtsi"`
			`#include "am335x-bone-common.dtsi"`
ARM: dts: Move most of am335x-boneblack.dts to am335x-boneblack-common.dtsi This is going to be shared with the BeagleBone Black Wireless Signed-off-by: Robert Nelson <robertcnelson@gmail.com> CC: Tony Lindgren <tony@atomide.com> CC: Jason Kridner <jkridner@beagleboard.org> Signed-off-by: Tony Lindgren <tony@atomide.com> 2016-12-28 00:58:34 +07:00			`#include "am335x-boneblack-common.dtsi"`
ARM: dts: am335x-bone*: add DT for BeagleBone Black The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI added, so create a common dtsi both can use. IMPORTANT: booting the existing am335x-bone.dts will blow up the HDMI transceiver after a dozen boots with an uSD card inserted because LDO will be at 3.3V instead of 1.8. MMC support for AM335x still isn't in, so only the LDO change has been added. Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Tested-by: Tom Rini <trini@ti.com> Tested-by: Matt Porter <matt.porter@linaro.org> Acked-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Tested-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com> 2013-09-09 21:29:21 +07:00
ARM: dts: am335x-bone*: Fix model name and update compatibility information Beaglebone white and beaglebone black differ in tiny little aspects. This is the reason why we maintain seperate dts for these platforms. However, there is no real way to decode from dtb which platform it is since compatible and model name are the same for both platforms. Fix this so that beaglebone black and beaglebone are identifiable, while maintaining compatibility for older zImages which might use old beaglebone compatible flag for black as well. Reported-by: Tom Rini <trini@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> 2014-09-03 23:03:10 +07:00			`/ {`
			`model = "TI AM335x BeagleBone Black";`
			`compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";`
			`};`
ARM: dts: am335x-boneblack: Enable 1GHz OPP for cpu Although all PG2.0 silicon may not support 1GHz OPP for the MPU, older Beaglebone Blacks may have PG2.0 silicon populated and these particular parts are guaranteed to support the OPP, so enable it for PG2.0 on am335x-boneblack only. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> eviewed-by: Lukasz Majewski <lukma@denx.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> 2017-03-06 22:23:39 +07:00
			`&cpu0_opp_table {`
			`/*`
			`* All PG 2.0 silicon may not support 1GHz but some of the early`
			`* BeagleBone Blacks have PG 2.0 silicon which is guaranteed`
			`* to support 1GHz OPP so enable it for PG 2.0 on this board.`
			`*/`
ARM: dts: Use - instead of @ for DT OPP entries for TI SoCs Compiling the DT file with W=1, DTC warns like follows: Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a unit name, but no reg property Fix this by replacing '@' with '-' as the OPP nodes will never have a "reg" property. Reported-by: Krzysztof Kozlowski <krzk@kernel.org> Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tony Lindgren <tony@atomide.com> 2017-04-20 17:55:06 +07:00			`oppnitro-1000000000 {`
ARM: dts: am335x-boneblack: Enable 1GHz OPP for cpu Although all PG2.0 silicon may not support 1GHz OPP for the MPU, older Beaglebone Blacks may have PG2.0 silicon populated and these particular parts are guaranteed to support the OPP, so enable it for PG2.0 on am335x-boneblack only. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> eviewed-by: Lukasz Majewski <lukma@denx.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> 2017-03-06 22:23:39 +07:00			`opp-supported-hw = <0x06 0x0100>;`
			`};`
			`};`