linux_dsm_epyc7002/drivers/net/r8169.c

5797 lines
137 KiB
C
Raw Normal View History

/*
* r8169.c: RealTek 8169/8168/8101 ethernet driver.
*
* Copyright (c) 2002 ShuChen <shuchen@realtek.com.tw>
* Copyright (c) 2003 - 2007 Francois Romieu <romieu@fr.zoreil.com>
* Copyright (c) a lot of people too. Please respect their work.
*
* See MAINTAINERS file for support contact information.
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/pci.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/delay.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/if_vlan.h>
#include <linux/crc32.h>
#include <linux/in.h>
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/pm_runtime.h>
#include <linux/firmware.h>
#include <linux/pci-aspm.h>
#include <linux/prefetch.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/irq.h>
#define RTL8169_VERSION "2.3LK-NAPI"
#define MODULENAME "r8169"
#define PFX MODULENAME ": "
#define FIRMWARE_8168D_1 "rtl_nic/rtl8168d-1.fw"
#define FIRMWARE_8168D_2 "rtl_nic/rtl8168d-2.fw"
#define FIRMWARE_8168E_1 "rtl_nic/rtl8168e-1.fw"
#define FIRMWARE_8168E_2 "rtl_nic/rtl8168e-2.fw"
#define FIRMWARE_8168E_3 "rtl_nic/rtl8168e-3.fw"
#define FIRMWARE_8105E_1 "rtl_nic/rtl8105e-1.fw"
#ifdef RTL8169_DEBUG
#define assert(expr) \
if (!(expr)) { \
printk( "Assertion failed! %s,%s,%s,line=%d\n", \
#expr,__FILE__,__func__,__LINE__); \
}
#define dprintk(fmt, args...) \
do { printk(KERN_DEBUG PFX fmt, ## args); } while (0)
#else
#define assert(expr) do {} while (0)
#define dprintk(fmt, args...) do {} while (0)
#endif /* RTL8169_DEBUG */
#define R8169_MSG_DEFAULT \
(NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN)
#define TX_BUFFS_AVAIL(tp) \
(tp->dirty_tx + NUM_TX_DESC - tp->cur_tx - 1)
/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
The RTL chips use a 64 element hash table based on the Ethernet CRC. */
2006-03-04 09:33:57 +07:00
static const int multicast_filter_limit = 32;
/* MAC address length */
#define MAC_ADDR_LEN 6
#define MAX_READ_REQUEST_SHIFT 12
#define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
#define SafeMtu 0x1c20 /* ... actually life sucks beyond ~7k */
#define InterFrameGap 0x03 /* 3 means InterFrameGap = the shortest one */
#define R8169_REGS_SIZE 256
#define R8169_NAPI_WEIGHT 64
#define NUM_TX_DESC 64 /* Number of Tx descriptor registers */
#define NUM_RX_DESC 256 /* Number of Rx descriptor registers */
#define RX_BUF_SIZE 1536 /* Rx Buffer size */
#define R8169_TX_RING_BYTES (NUM_TX_DESC * sizeof(struct TxDesc))
#define R8169_RX_RING_BYTES (NUM_RX_DESC * sizeof(struct RxDesc))
#define RTL8169_TX_TIMEOUT (6*HZ)
#define RTL8169_PHY_TIMEOUT (10*HZ)
#define RTL_EEPROM_SIG cpu_to_le32(0x8129)
#define RTL_EEPROM_SIG_MASK cpu_to_le32(0xffff)
#define RTL_EEPROM_SIG_ADDR 0x0000
/* write/read MMIO register */
#define RTL_W8(reg, val8) writeb ((val8), ioaddr + (reg))
#define RTL_W16(reg, val16) writew ((val16), ioaddr + (reg))
#define RTL_W32(reg, val32) writel ((val32), ioaddr + (reg))
#define RTL_R8(reg) readb (ioaddr + (reg))
#define RTL_R16(reg) readw (ioaddr + (reg))
#define RTL_R32(reg) readl (ioaddr + (reg))
enum mac_version {
RTL_GIGA_MAC_VER_01 = 0,
RTL_GIGA_MAC_VER_02,
RTL_GIGA_MAC_VER_03,
RTL_GIGA_MAC_VER_04,
RTL_GIGA_MAC_VER_05,
RTL_GIGA_MAC_VER_06,
RTL_GIGA_MAC_VER_07,
RTL_GIGA_MAC_VER_08,
RTL_GIGA_MAC_VER_09,
RTL_GIGA_MAC_VER_10,
RTL_GIGA_MAC_VER_11,
RTL_GIGA_MAC_VER_12,
RTL_GIGA_MAC_VER_13,
RTL_GIGA_MAC_VER_14,
RTL_GIGA_MAC_VER_15,
RTL_GIGA_MAC_VER_16,
RTL_GIGA_MAC_VER_17,
RTL_GIGA_MAC_VER_18,
RTL_GIGA_MAC_VER_19,
RTL_GIGA_MAC_VER_20,
RTL_GIGA_MAC_VER_21,
RTL_GIGA_MAC_VER_22,
RTL_GIGA_MAC_VER_23,
RTL_GIGA_MAC_VER_24,
RTL_GIGA_MAC_VER_25,
RTL_GIGA_MAC_VER_26,
RTL_GIGA_MAC_VER_27,
RTL_GIGA_MAC_VER_28,
RTL_GIGA_MAC_VER_29,
RTL_GIGA_MAC_VER_30,
RTL_GIGA_MAC_VER_31,
RTL_GIGA_MAC_VER_32,
RTL_GIGA_MAC_VER_33,
RTL_GIGA_MAC_VER_34,
RTL_GIGA_MAC_NONE = 0xff,
};
enum rtl_tx_desc_version {
RTL_TD_0 = 0,
RTL_TD_1 = 1,
};
#define _R(NAME,TD,FW) \
{ .name = NAME, .txd_version = TD, .fw_name = FW }
static const struct {
const char *name;
enum rtl_tx_desc_version txd_version;
const char *fw_name;
} rtl_chip_infos[] = {
/* PCI devices. */
[RTL_GIGA_MAC_VER_01] =
_R("RTL8169", RTL_TD_0, NULL),
[RTL_GIGA_MAC_VER_02] =
_R("RTL8169s", RTL_TD_0, NULL),
[RTL_GIGA_MAC_VER_03] =
_R("RTL8110s", RTL_TD_0, NULL),
[RTL_GIGA_MAC_VER_04] =
_R("RTL8169sb/8110sb", RTL_TD_0, NULL),
[RTL_GIGA_MAC_VER_05] =
_R("RTL8169sc/8110sc", RTL_TD_0, NULL),
[RTL_GIGA_MAC_VER_06] =
_R("RTL8169sc/8110sc", RTL_TD_0, NULL),
/* PCI-E devices. */
[RTL_GIGA_MAC_VER_07] =
_R("RTL8102e", RTL_TD_1, NULL),
[RTL_GIGA_MAC_VER_08] =
_R("RTL8102e", RTL_TD_1, NULL),
[RTL_GIGA_MAC_VER_09] =
_R("RTL8102e", RTL_TD_1, NULL),
[RTL_GIGA_MAC_VER_10] =
_R("RTL8101e", RTL_TD_0, NULL),
[RTL_GIGA_MAC_VER_11] =
_R("RTL8168b/8111b", RTL_TD_0, NULL),
[RTL_GIGA_MAC_VER_12] =
_R("RTL8168b/8111b", RTL_TD_0, NULL),
[RTL_GIGA_MAC_VER_13] =
_R("RTL8101e", RTL_TD_0, NULL),
[RTL_GIGA_MAC_VER_14] =
_R("RTL8100e", RTL_TD_0, NULL),
[RTL_GIGA_MAC_VER_15] =
_R("RTL8100e", RTL_TD_0, NULL),
[RTL_GIGA_MAC_VER_16] =
_R("RTL8101e", RTL_TD_0, NULL),
[RTL_GIGA_MAC_VER_17] =
_R("RTL8168b/8111b", RTL_TD_0, NULL),
[RTL_GIGA_MAC_VER_18] =
_R("RTL8168cp/8111cp", RTL_TD_1, NULL),
[RTL_GIGA_MAC_VER_19] =
_R("RTL8168c/8111c", RTL_TD_1, NULL),
[RTL_GIGA_MAC_VER_20] =
_R("RTL8168c/8111c", RTL_TD_1, NULL),
[RTL_GIGA_MAC_VER_21] =
_R("RTL8168c/8111c", RTL_TD_1, NULL),
[RTL_GIGA_MAC_VER_22] =
_R("RTL8168c/8111c", RTL_TD_1, NULL),
[RTL_GIGA_MAC_VER_23] =
_R("RTL8168cp/8111cp", RTL_TD_1, NULL),
[RTL_GIGA_MAC_VER_24] =
_R("RTL8168cp/8111cp", RTL_TD_1, NULL),
[RTL_GIGA_MAC_VER_25] =
_R("RTL8168d/8111d", RTL_TD_1, FIRMWARE_8168D_1),
[RTL_GIGA_MAC_VER_26] =
_R("RTL8168d/8111d", RTL_TD_1, FIRMWARE_8168D_2),
[RTL_GIGA_MAC_VER_27] =
_R("RTL8168dp/8111dp", RTL_TD_1, NULL),
[RTL_GIGA_MAC_VER_28] =
_R("RTL8168dp/8111dp", RTL_TD_1, NULL),
[RTL_GIGA_MAC_VER_29] =
_R("RTL8105e", RTL_TD_1, FIRMWARE_8105E_1),
[RTL_GIGA_MAC_VER_30] =
_R("RTL8105e", RTL_TD_1, FIRMWARE_8105E_1),
[RTL_GIGA_MAC_VER_31] =
_R("RTL8168dp/8111dp", RTL_TD_1, NULL),
[RTL_GIGA_MAC_VER_32] =
_R("RTL8168e/8111e", RTL_TD_1, FIRMWARE_8168E_1),
[RTL_GIGA_MAC_VER_33] =
_R("RTL8168e/8111e", RTL_TD_1, FIRMWARE_8168E_2),
[RTL_GIGA_MAC_VER_34] =
_R("RTL8168evl/8111evl",RTL_TD_1, FIRMWARE_8168E_3)
};
#undef _R
r8169: sync with vendor's driver - add several PCI ID for the PCI-E adapters ; - new identification strings ; - the RTL_GIGA_MAC_VER_ defines have been renamed to closely match the out-of-tree driver. It makes the comparison less hairy ; - various magic ; - the PCI region for the device with PCI ID 0x8136 is guessed. Explanation: the in-kernel Linux driver is written to allow MM register accesses and avoid the IO tax. The relevant BAR register was found at base address 1 for the plain-old PCI 8169. User reported lspci show that it is found at base address 2 for the new Gigabit PCI-E 816{8/9}. Typically: 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.: Unknown device 8168 (rev 01) Subsystem: Unknown device 1631:e015 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 20 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at b800 [size=256] Region 2: Memory at ff7ff000 (64-bit, non-prefetchable) [size=4K] ^^^^^^^^ So far I have not received any lspci report for the 0x8136 and Realtek's driver do not help: be it under BSD or Linux, their r1000 driver include a USE_IO_SPACE #define but the bar address is always hardcoded to 1 in the MM case. :o/ - the 8168 has been reported to require an extra alignment for its receive buffers. The status of the 8167 and 8136 is not known in this regard. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-07-27 04:14:13 +07:00
enum cfg_version {
RTL_CFG_0 = 0x00,
RTL_CFG_1,
RTL_CFG_2
};
static void rtl_hw_start_8169(struct net_device *);
static void rtl_hw_start_8168(struct net_device *);
static void rtl_hw_start_8101(struct net_device *);
static DEFINE_PCI_DEVICE_TABLE(rtl8169_pci_tbl) = {
r8169: sync with vendor's driver - add several PCI ID for the PCI-E adapters ; - new identification strings ; - the RTL_GIGA_MAC_VER_ defines have been renamed to closely match the out-of-tree driver. It makes the comparison less hairy ; - various magic ; - the PCI region for the device with PCI ID 0x8136 is guessed. Explanation: the in-kernel Linux driver is written to allow MM register accesses and avoid the IO tax. The relevant BAR register was found at base address 1 for the plain-old PCI 8169. User reported lspci show that it is found at base address 2 for the new Gigabit PCI-E 816{8/9}. Typically: 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.: Unknown device 8168 (rev 01) Subsystem: Unknown device 1631:e015 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 20 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at b800 [size=256] Region 2: Memory at ff7ff000 (64-bit, non-prefetchable) [size=4K] ^^^^^^^^ So far I have not received any lspci report for the 0x8136 and Realtek's driver do not help: be it under BSD or Linux, their r1000 driver include a USE_IO_SPACE #define but the bar address is always hardcoded to 1 in the MM case. :o/ - the 8168 has been reported to require an extra alignment for its receive buffers. The status of the 8167 and 8136 is not known in this regard. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-07-27 04:14:13 +07:00
{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8129), 0, 0, RTL_CFG_0 },
{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8136), 0, 0, RTL_CFG_2 },
{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8167), 0, 0, RTL_CFG_0 },
{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8168), 0, 0, RTL_CFG_1 },
r8169: sync with vendor's driver - add several PCI ID for the PCI-E adapters ; - new identification strings ; - the RTL_GIGA_MAC_VER_ defines have been renamed to closely match the out-of-tree driver. It makes the comparison less hairy ; - various magic ; - the PCI region for the device with PCI ID 0x8136 is guessed. Explanation: the in-kernel Linux driver is written to allow MM register accesses and avoid the IO tax. The relevant BAR register was found at base address 1 for the plain-old PCI 8169. User reported lspci show that it is found at base address 2 for the new Gigabit PCI-E 816{8/9}. Typically: 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.: Unknown device 8168 (rev 01) Subsystem: Unknown device 1631:e015 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 20 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at b800 [size=256] Region 2: Memory at ff7ff000 (64-bit, non-prefetchable) [size=4K] ^^^^^^^^ So far I have not received any lspci report for the 0x8136 and Realtek's driver do not help: be it under BSD or Linux, their r1000 driver include a USE_IO_SPACE #define but the bar address is always hardcoded to 1 in the MM case. :o/ - the 8168 has been reported to require an extra alignment for its receive buffers. The status of the 8167 and 8136 is not known in this regard. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-07-27 04:14:13 +07:00
{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8169), 0, 0, RTL_CFG_0 },
{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4300), 0, 0, RTL_CFG_0 },
{ PCI_DEVICE(PCI_VENDOR_ID_AT, 0xc107), 0, 0, RTL_CFG_0 },
r8169: sync with vendor's driver - add several PCI ID for the PCI-E adapters ; - new identification strings ; - the RTL_GIGA_MAC_VER_ defines have been renamed to closely match the out-of-tree driver. It makes the comparison less hairy ; - various magic ; - the PCI region for the device with PCI ID 0x8136 is guessed. Explanation: the in-kernel Linux driver is written to allow MM register accesses and avoid the IO tax. The relevant BAR register was found at base address 1 for the plain-old PCI 8169. User reported lspci show that it is found at base address 2 for the new Gigabit PCI-E 816{8/9}. Typically: 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.: Unknown device 8168 (rev 01) Subsystem: Unknown device 1631:e015 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 20 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at b800 [size=256] Region 2: Memory at ff7ff000 (64-bit, non-prefetchable) [size=4K] ^^^^^^^^ So far I have not received any lspci report for the 0x8136 and Realtek's driver do not help: be it under BSD or Linux, their r1000 driver include a USE_IO_SPACE #define but the bar address is always hardcoded to 1 in the MM case. :o/ - the 8168 has been reported to require an extra alignment for its receive buffers. The status of the 8167 and 8136 is not known in this regard. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-07-27 04:14:13 +07:00
{ PCI_DEVICE(0x16ec, 0x0116), 0, 0, RTL_CFG_0 },
{ PCI_VENDOR_ID_LINKSYS, 0x1032,
PCI_ANY_ID, 0x0024, 0, 0, RTL_CFG_0 },
{ 0x0001, 0x8168,
PCI_ANY_ID, 0x2410, 0, 0, RTL_CFG_2 },
{0,},
};
MODULE_DEVICE_TABLE(pci, rtl8169_pci_tbl);
static int rx_buf_sz = 16383;
static int use_dac;
static struct {
u32 msg_enable;
} debug = { -1 };
enum rtl_registers {
MAC0 = 0, /* Ethernet hardware address. */
MAC4 = 4,
MAR0 = 8, /* Multicast filter. */
CounterAddrLow = 0x10,
CounterAddrHigh = 0x14,
TxDescStartAddrLow = 0x20,
TxDescStartAddrHigh = 0x24,
TxHDescStartAddrLow = 0x28,
TxHDescStartAddrHigh = 0x2c,
FLASH = 0x30,
ERSR = 0x36,
ChipCmd = 0x37,
TxPoll = 0x38,
IntrMask = 0x3c,
IntrStatus = 0x3e,
TxConfig = 0x40,
#define TXCFG_AUTO_FIFO (1 << 7) /* 8111e-vl */
#define TXCFG_EMPTY (1 << 11) /* 8111e-vl */
RxConfig = 0x44,
#define RX128_INT_EN (1 << 15) /* 8111c and later */
#define RX_MULTI_EN (1 << 14) /* 8111c only */
#define RXCFG_FIFO_SHIFT 13
/* No threshold before first PCI xfer */
#define RX_FIFO_THRESH (7 << RXCFG_FIFO_SHIFT)
#define RXCFG_DMA_SHIFT 8
/* Unlimited maximum PCI burst. */
#define RX_DMA_BURST (7 << RXCFG_DMA_SHIFT)
RxMissed = 0x4c,
Cfg9346 = 0x50,
Config0 = 0x51,
Config1 = 0x52,
Config2 = 0x53,
Config3 = 0x54,
Config4 = 0x55,
Config5 = 0x56,
MultiIntr = 0x5c,
PHYAR = 0x60,
PHYstatus = 0x6c,
RxMaxSize = 0xda,
CPlusCmd = 0xe0,
IntrMitigate = 0xe2,
RxDescAddrLow = 0xe4,
RxDescAddrHigh = 0xe8,
EarlyTxThres = 0xec, /* 8169. Unit of 32 bytes. */
#define NoEarlyTx 0x3f /* Max value : no early transmit. */
MaxTxPacketSize = 0xec, /* 8101/8168. Unit of 128 bytes. */
#define TxPacketMax (8064 >> 7)
FuncEvent = 0xf0,
FuncEventMask = 0xf4,
FuncPresetState = 0xf8,
FuncForceEvent = 0xfc,
};
enum rtl8110_registers {
TBICSR = 0x64,
TBI_ANAR = 0x68,
TBI_LPAR = 0x6a,
};
enum rtl8168_8101_registers {
CSIDR = 0x64,
CSIAR = 0x68,
#define CSIAR_FLAG 0x80000000
#define CSIAR_WRITE_CMD 0x80000000
#define CSIAR_BYTE_ENABLE 0x0f
#define CSIAR_BYTE_ENABLE_SHIFT 12
#define CSIAR_ADDR_MASK 0x0fff
PMCH = 0x6f,
EPHYAR = 0x80,
#define EPHYAR_FLAG 0x80000000
#define EPHYAR_WRITE_CMD 0x80000000
#define EPHYAR_REG_MASK 0x1f
#define EPHYAR_REG_SHIFT 16
#define EPHYAR_DATA_MASK 0xffff
DLLPR = 0xd0,
#define PFM_EN (1 << 6)
DBG_REG = 0xd1,
#define FIX_NAK_1 (1 << 4)
#define FIX_NAK_2 (1 << 3)
TWSI = 0xd2,
MCU = 0xd3,
#define NOW_IS_OOB (1 << 7)
#define EN_NDP (1 << 3)
#define EN_OOB_RESET (1 << 2)
EFUSEAR = 0xdc,
#define EFUSEAR_FLAG 0x80000000
#define EFUSEAR_WRITE_CMD 0x80000000
#define EFUSEAR_READ_CMD 0x00000000
#define EFUSEAR_REG_MASK 0x03ff
#define EFUSEAR_REG_SHIFT 8
#define EFUSEAR_DATA_MASK 0xff
};
enum rtl8168_registers {
LED_FREQ = 0x1a,
EEE_LED = 0x1b,
ERIDR = 0x70,
ERIAR = 0x74,
#define ERIAR_FLAG 0x80000000
#define ERIAR_WRITE_CMD 0x80000000
#define ERIAR_READ_CMD 0x00000000
#define ERIAR_ADDR_BYTE_ALIGN 4
#define ERIAR_TYPE_SHIFT 16
#define ERIAR_EXGMAC (0x00 << ERIAR_TYPE_SHIFT)
#define ERIAR_MSIX (0x01 << ERIAR_TYPE_SHIFT)
#define ERIAR_ASF (0x02 << ERIAR_TYPE_SHIFT)
#define ERIAR_MASK_SHIFT 12
#define ERIAR_MASK_0001 (0x1 << ERIAR_MASK_SHIFT)
#define ERIAR_MASK_0011 (0x3 << ERIAR_MASK_SHIFT)
#define ERIAR_MASK_1111 (0xf << ERIAR_MASK_SHIFT)
EPHY_RXER_NUM = 0x7c,
OCPDR = 0xb0, /* OCP GPHY access */
#define OCPDR_WRITE_CMD 0x80000000
#define OCPDR_READ_CMD 0x00000000
#define OCPDR_REG_MASK 0x7f
#define OCPDR_GPHY_REG_SHIFT 16
#define OCPDR_DATA_MASK 0xffff
OCPAR = 0xb4,
#define OCPAR_FLAG 0x80000000
#define OCPAR_GPHY_WRITE_CMD 0x8000f060
#define OCPAR_GPHY_READ_CMD 0x0000f060
RDSAR1 = 0xd0, /* 8168c only. Undocumented on 8168dp */
MISC = 0xf0, /* 8168e only. */
#define TXPLA_RST (1 << 29)
#define PWM_EN (1 << 22)
};
enum rtl_register_content {
/* InterruptStatusBits */
SYSErr = 0x8000,
PCSTimeout = 0x4000,
SWInt = 0x0100,
TxDescUnavail = 0x0080,
RxFIFOOver = 0x0040,
LinkChg = 0x0020,
RxOverflow = 0x0010,
TxErr = 0x0008,
TxOK = 0x0004,
RxErr = 0x0002,
RxOK = 0x0001,
/* RxStatusDesc */
RxFOVF = (1 << 23),
RxRWT = (1 << 22),
RxRES = (1 << 21),
RxRUNT = (1 << 20),
RxCRC = (1 << 19),
/* ChipCmdBits */
StopReq = 0x80,
CmdReset = 0x10,
CmdRxEnb = 0x08,
CmdTxEnb = 0x04,
RxBufEmpty = 0x01,
/* TXPoll register p.5 */
HPQ = 0x80, /* Poll cmd on the high prio queue */
NPQ = 0x40, /* Poll cmd on the low prio queue */
FSWInt = 0x01, /* Forced software interrupt */
/* Cfg9346Bits */
Cfg9346_Lock = 0x00,
Cfg9346_Unlock = 0xc0,
/* rx_mode_bits */
AcceptErr = 0x20,
AcceptRunt = 0x10,
AcceptBroadcast = 0x08,
AcceptMulticast = 0x04,
AcceptMyPhys = 0x02,
AcceptAllPhys = 0x01,
#define RX_CONFIG_ACCEPT_MASK 0x3f
/* TxConfigBits */
TxInterFrameGapShift = 24,
TxDMAShift = 8, /* DMA burst value (0-7) is shift this many bits */
/* Config1 register p.24 */
LEDS1 = (1 << 7),
LEDS0 = (1 << 6),
MSIEnable = (1 << 5), /* Enable Message Signaled Interrupt */
Speed_down = (1 << 4),
MEMMAP = (1 << 3),
IOMAP = (1 << 2),
VPD = (1 << 1),
PMEnable = (1 << 0), /* Power Management Enable */
/* Config2 register p. 25 */
PCI_Clock_66MHz = 0x01,
PCI_Clock_33MHz = 0x00,
/* Config3 register p.25 */
MagicPacket = (1 << 5), /* Wake up when receives a Magic Packet */
LinkUp = (1 << 4), /* Wake up when the cable connection is re-established */
Beacon_en = (1 << 0), /* 8168 only. Reserved in the 8168b */
/* Config5 register p.27 */
BWF = (1 << 6), /* Accept Broadcast wakeup frame */
MWF = (1 << 5), /* Accept Multicast wakeup frame */
UWF = (1 << 4), /* Accept Unicast wakeup frame */
Spi_en = (1 << 3),
LanWake = (1 << 1), /* LanWake enable/disable */
PMEStatus = (1 << 0), /* PME status can be reset by PCI RST# */
/* TBICSR p.28 */
TBIReset = 0x80000000,
TBILoopback = 0x40000000,
TBINwEnable = 0x20000000,
TBINwRestart = 0x10000000,
TBILinkOk = 0x02000000,
TBINwComplete = 0x01000000,
/* CPlusCmd p.31 */
EnableBist = (1 << 15), // 8168 8101
Mac_dbgo_oe = (1 << 14), // 8168 8101
Normal_mode = (1 << 13), // unused
Force_half_dup = (1 << 12), // 8168 8101
Force_rxflow_en = (1 << 11), // 8168 8101
Force_txflow_en = (1 << 10), // 8168 8101
Cxpl_dbg_sel = (1 << 9), // 8168 8101
ASF = (1 << 8), // 8168 8101
PktCntrDisable = (1 << 7), // 8168 8101
Mac_dbgo_sel = 0x001c, // 8168
RxVlan = (1 << 6),
RxChkSum = (1 << 5),
PCIDAC = (1 << 4),
PCIMulRW = (1 << 3),
INTT_0 = 0x0000, // 8168
INTT_1 = 0x0001, // 8168
INTT_2 = 0x0002, // 8168
INTT_3 = 0x0003, // 8168
/* rtl8169_PHYstatus */
TBI_Enable = 0x80,
TxFlowCtrl = 0x40,
RxFlowCtrl = 0x20,
_1000bpsF = 0x10,
_100bps = 0x08,
_10bps = 0x04,
LinkStatus = 0x02,
FullDup = 0x01,
/* _TBICSRBit */
TBILinkOK = 0x02000000,
/* DumpCounterCommand */
CounterDump = 0x8,
};
enum rtl_desc_bit {
/* First doubleword. */
DescOwn = (1 << 31), /* Descriptor is owned by NIC */
RingEnd = (1 << 30), /* End of descriptor ring */
FirstFrag = (1 << 29), /* First segment of a packet */
LastFrag = (1 << 28), /* Final segment of a packet */
};
/* Generic case. */
enum rtl_tx_desc_bit {
/* First doubleword. */
TD_LSO = (1 << 27), /* Large Send Offload */
#define TD_MSS_MAX 0x07ffu /* MSS value */
/* Second doubleword. */
TxVlanTag = (1 << 17), /* Add VLAN tag */
};
/* 8169, 8168b and 810x except 8102e. */
enum rtl_tx_desc_bit_0 {
/* First doubleword. */
#define TD0_MSS_SHIFT 16 /* MSS position (11 bits) */
TD0_TCP_CS = (1 << 16), /* Calculate TCP/IP checksum */
TD0_UDP_CS = (1 << 17), /* Calculate UDP/IP checksum */
TD0_IP_CS = (1 << 18), /* Calculate IP checksum */
};
/* 8102e, 8168c and beyond. */
enum rtl_tx_desc_bit_1 {
/* Second doubleword. */
#define TD1_MSS_SHIFT 18 /* MSS position (11 bits) */
TD1_IP_CS = (1 << 29), /* Calculate IP checksum */
TD1_TCP_CS = (1 << 30), /* Calculate TCP/IP checksum */
TD1_UDP_CS = (1 << 31), /* Calculate UDP/IP checksum */
};
static const struct rtl_tx_desc_info {
struct {
u32 udp;
u32 tcp;
} checksum;
u16 mss_shift;
u16 opts_offset;
} tx_desc_info [] = {
[RTL_TD_0] = {
.checksum = {
.udp = TD0_IP_CS | TD0_UDP_CS,
.tcp = TD0_IP_CS | TD0_TCP_CS
},
.mss_shift = TD0_MSS_SHIFT,
.opts_offset = 0
},
[RTL_TD_1] = {
.checksum = {
.udp = TD1_IP_CS | TD1_UDP_CS,
.tcp = TD1_IP_CS | TD1_TCP_CS
},
.mss_shift = TD1_MSS_SHIFT,
.opts_offset = 1
}
};
enum rtl_rx_desc_bit {
/* Rx private */
PID1 = (1 << 18), /* Protocol ID bit 1/2 */
PID0 = (1 << 17), /* Protocol ID bit 2/2 */
#define RxProtoUDP (PID1)
#define RxProtoTCP (PID0)
#define RxProtoIP (PID1 | PID0)
#define RxProtoMask RxProtoIP
IPFail = (1 << 16), /* IP checksum failed */
UDPFail = (1 << 15), /* UDP/IP checksum failed */
TCPFail = (1 << 14), /* TCP/IP checksum failed */
RxVlanTag = (1 << 16), /* VLAN tag available */
};
#define RsvdMask 0x3fffc000
struct TxDesc {
__le32 opts1;
__le32 opts2;
__le64 addr;
};
struct RxDesc {
__le32 opts1;
__le32 opts2;
__le64 addr;
};
struct ring_info {
struct sk_buff *skb;
u32 len;
u8 __pad[sizeof(void *) - sizeof(u32)];
};
enum features {
RTL_FEATURE_WOL = (1 << 0),
RTL_FEATURE_MSI = (1 << 1),
RTL_FEATURE_GMII = (1 << 2),
};
struct rtl8169_counters {
__le64 tx_packets;
__le64 rx_packets;
__le64 tx_errors;
__le32 rx_errors;
__le16 rx_missed;
__le16 align_errors;
__le32 tx_one_collision;
__le32 tx_multi_collision;
__le64 rx_unicast;
__le64 rx_broadcast;
__le32 rx_multicast;
__le16 tx_aborted;
__le16 tx_underun;
};
struct rtl8169_private {
void __iomem *mmio_addr; /* memory map physical address */
struct pci_dev *pci_dev;
struct net_device *dev;
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 06:41:36 +07:00
struct napi_struct napi;
spinlock_t lock;
u32 msg_enable;
u16 txd_version;
u16 mac_version;
u32 cur_rx; /* Index into the Rx descriptor buffer of next Rx pkt. */
u32 cur_tx; /* Index into the Tx descriptor buffer of next Rx pkt. */
u32 dirty_rx;
u32 dirty_tx;
struct TxDesc *TxDescArray; /* 256-aligned Tx descriptor ring */
struct RxDesc *RxDescArray; /* 256-aligned Rx descriptor ring */
dma_addr_t TxPhyAddr;
dma_addr_t RxPhyAddr;
void *Rx_databuff[NUM_RX_DESC]; /* Rx data buffers */
struct ring_info tx_skb[NUM_TX_DESC]; /* Tx data buffers */
struct timer_list timer;
u16 cp_cmd;
u16 intr_event;
u16 napi_event;
u16 intr_mask;
struct mdio_ops {
void (*write)(void __iomem *, int, int);
int (*read)(void __iomem *, int);
} mdio_ops;
struct pll_power_ops {
void (*down)(struct rtl8169_private *);
void (*up)(struct rtl8169_private *);
} pll_power_ops;
int (*set_speed)(struct net_device *, u8 aneg, u16 sp, u8 dpx, u32 adv);
int (*get_settings)(struct net_device *, struct ethtool_cmd *);
void (*phy_reset_enable)(struct rtl8169_private *tp);
void (*hw_start)(struct net_device *);
unsigned int (*phy_reset_pending)(struct rtl8169_private *tp);
unsigned int (*link_ok)(void __iomem *);
int (*do_ioctl)(struct rtl8169_private *tp, struct mii_ioctl_data *data, int cmd);
struct delayed_work task;
unsigned features;
struct mii_if_info mii;
struct rtl8169_counters counters;
u32 saved_wolopts;
struct rtl_fw {
const struct firmware *fw;
#define RTL_VER_SIZE 32
char version[RTL_VER_SIZE];
struct rtl_fw_phy_action {
__le32 *code;
size_t size;
} phy_action;
} *rtl_fw;
#define RTL_FIRMWARE_UNKNOWN ERR_PTR(-EAGAIN)
};
MODULE_AUTHOR("Realtek and the Linux r8169 crew <netdev@vger.kernel.org>");
MODULE_DESCRIPTION("RealTek RTL-8169 Gigabit Ethernet driver");
module_param(use_dac, int, 0);
MODULE_PARM_DESC(use_dac, "Enable PCI DAC. Unsafe on 32 bit PCI slot.");
module_param_named(debug, debug.msg_enable, int, 0);
MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., 16=all)");
MODULE_LICENSE("GPL");
MODULE_VERSION(RTL8169_VERSION);
MODULE_FIRMWARE(FIRMWARE_8168D_1);
MODULE_FIRMWARE(FIRMWARE_8168D_2);
MODULE_FIRMWARE(FIRMWARE_8168E_1);
MODULE_FIRMWARE(FIRMWARE_8168E_2);
MODULE_FIRMWARE(FIRMWARE_8105E_1);
static int rtl8169_open(struct net_device *dev);
static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb,
struct net_device *dev);
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 20:55:46 +07:00
static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance);
static int rtl8169_init_ring(struct net_device *dev);
static void rtl_hw_start(struct net_device *dev);
static int rtl8169_close(struct net_device *dev);
static void rtl_set_rx_mode(struct net_device *dev);
static void rtl8169_tx_timeout(struct net_device *dev);
static struct net_device_stats *rtl8169_get_stats(struct net_device *dev);
static int rtl8169_rx_interrupt(struct net_device *, struct rtl8169_private *,
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 06:41:36 +07:00
void __iomem *, u32 budget);
static int rtl8169_change_mtu(struct net_device *dev, int new_mtu);
static void rtl8169_down(struct net_device *dev);
static void rtl8169_rx_clear(struct rtl8169_private *tp);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 06:41:36 +07:00
static int rtl8169_poll(struct napi_struct *napi, int budget);
static u32 ocp_read(struct rtl8169_private *tp, u8 mask, u16 reg)
{
void __iomem *ioaddr = tp->mmio_addr;
int i;
RTL_W32(OCPAR, ((u32)mask & 0x0f) << 12 | (reg & 0x0fff));
for (i = 0; i < 20; i++) {
udelay(100);
if (RTL_R32(OCPAR) & OCPAR_FLAG)
break;
}
return RTL_R32(OCPDR);
}
static void ocp_write(struct rtl8169_private *tp, u8 mask, u16 reg, u32 data)
{
void __iomem *ioaddr = tp->mmio_addr;
int i;
RTL_W32(OCPDR, data);
RTL_W32(OCPAR, OCPAR_FLAG | ((u32)mask & 0x0f) << 12 | (reg & 0x0fff));
for (i = 0; i < 20; i++) {
udelay(100);
if ((RTL_R32(OCPAR) & OCPAR_FLAG) == 0)
break;
}
}
static void rtl8168_oob_notify(struct rtl8169_private *tp, u8 cmd)
{
void __iomem *ioaddr = tp->mmio_addr;
int i;
RTL_W8(ERIDR, cmd);
RTL_W32(ERIAR, 0x800010e8);
msleep(2);
for (i = 0; i < 5; i++) {
udelay(100);
if (!(RTL_R32(ERIAR) & ERIAR_FLAG))
break;
}
ocp_write(tp, 0x1, 0x30, 0x00000001);
}
#define OOB_CMD_RESET 0x00
#define OOB_CMD_DRIVER_START 0x05
#define OOB_CMD_DRIVER_STOP 0x06
static u16 rtl8168_get_ocp_reg(struct rtl8169_private *tp)
{
return (tp->mac_version == RTL_GIGA_MAC_VER_31) ? 0xb8 : 0x10;
}
static void rtl8168_driver_start(struct rtl8169_private *tp)
{
u16 reg;
int i;
rtl8168_oob_notify(tp, OOB_CMD_DRIVER_START);
reg = rtl8168_get_ocp_reg(tp);
for (i = 0; i < 10; i++) {
msleep(10);
if (ocp_read(tp, 0x0f, reg) & 0x00000800)
break;
}
}
static void rtl8168_driver_stop(struct rtl8169_private *tp)
{
u16 reg;
int i;
rtl8168_oob_notify(tp, OOB_CMD_DRIVER_STOP);
reg = rtl8168_get_ocp_reg(tp);
for (i = 0; i < 10; i++) {
msleep(10);
if ((ocp_read(tp, 0x0f, reg) & 0x00000800) == 0)
break;
}
}
static int r8168dp_check_dash(struct rtl8169_private *tp)
{
u16 reg = rtl8168_get_ocp_reg(tp);
return (ocp_read(tp, 0x0f, reg) & 0x00008000) ? 1 : 0;
}
static void r8169_mdio_write(void __iomem *ioaddr, int reg_addr, int value)
{
int i;
RTL_W32(PHYAR, 0x80000000 | (reg_addr & 0x1f) << 16 | (value & 0xffff));
for (i = 20; i > 0; i--) {
/*
* Check if the RTL8169 has completed writing to the specified
* MII register.
*/
if (!(RTL_R32(PHYAR) & 0x80000000))
break;
udelay(25);
}
/*
* According to hardware specs a 20us delay is required after write
* complete indication, but before sending next command.
*/
udelay(20);
}
static int r8169_mdio_read(void __iomem *ioaddr, int reg_addr)
{
int i, value = -1;
RTL_W32(PHYAR, 0x0 | (reg_addr & 0x1f) << 16);
for (i = 20; i > 0; i--) {
/*
* Check if the RTL8169 has completed retrieving data from
* the specified MII register.
*/
if (RTL_R32(PHYAR) & 0x80000000) {
value = RTL_R32(PHYAR) & 0xffff;
break;
}
udelay(25);
}
/*
* According to hardware specs a 20us delay is required after read
* complete indication, but before sending next command.
*/
udelay(20);
return value;
}
static void r8168dp_1_mdio_access(void __iomem *ioaddr, int reg_addr, u32 data)
{
int i;
RTL_W32(OCPDR, data |
((reg_addr & OCPDR_REG_MASK) << OCPDR_GPHY_REG_SHIFT));
RTL_W32(OCPAR, OCPAR_GPHY_WRITE_CMD);
RTL_W32(EPHY_RXER_NUM, 0);
for (i = 0; i < 100; i++) {
mdelay(1);
if (!(RTL_R32(OCPAR) & OCPAR_FLAG))
break;
}
}
static void r8168dp_1_mdio_write(void __iomem *ioaddr, int reg_addr, int value)
{
r8168dp_1_mdio_access(ioaddr, reg_addr, OCPDR_WRITE_CMD |
(value & OCPDR_DATA_MASK));
}
static int r8168dp_1_mdio_read(void __iomem *ioaddr, int reg_addr)
{
int i;
r8168dp_1_mdio_access(ioaddr, reg_addr, OCPDR_READ_CMD);
mdelay(1);
RTL_W32(OCPAR, OCPAR_GPHY_READ_CMD);
RTL_W32(EPHY_RXER_NUM, 0);
for (i = 0; i < 100; i++) {
mdelay(1);
if (RTL_R32(OCPAR) & OCPAR_FLAG)
break;
}
return RTL_R32(OCPDR) & OCPDR_DATA_MASK;
}
#define R8168DP_1_MDIO_ACCESS_BIT 0x00020000
static void r8168dp_2_mdio_start(void __iomem *ioaddr)
{
RTL_W32(0xd0, RTL_R32(0xd0) & ~R8168DP_1_MDIO_ACCESS_BIT);
}
static void r8168dp_2_mdio_stop(void __iomem *ioaddr)
{
RTL_W32(0xd0, RTL_R32(0xd0) | R8168DP_1_MDIO_ACCESS_BIT);
}
static void r8168dp_2_mdio_write(void __iomem *ioaddr, int reg_addr, int value)
{
r8168dp_2_mdio_start(ioaddr);
r8169_mdio_write(ioaddr, reg_addr, value);
r8168dp_2_mdio_stop(ioaddr);
}
static int r8168dp_2_mdio_read(void __iomem *ioaddr, int reg_addr)
{
int value;
r8168dp_2_mdio_start(ioaddr);
value = r8169_mdio_read(ioaddr, reg_addr);
r8168dp_2_mdio_stop(ioaddr);
return value;
}
static void rtl_writephy(struct rtl8169_private *tp, int location, u32 val)
{
tp->mdio_ops.write(tp->mmio_addr, location, val);
}
static int rtl_readphy(struct rtl8169_private *tp, int location)
{
return tp->mdio_ops.read(tp->mmio_addr, location);
}
static void rtl_patchphy(struct rtl8169_private *tp, int reg_addr, int value)
{
rtl_writephy(tp, reg_addr, rtl_readphy(tp, reg_addr) | value);
}
static void rtl_w1w0_phy(struct rtl8169_private *tp, int reg_addr, int p, int m)
{
int val;
val = rtl_readphy(tp, reg_addr);
rtl_writephy(tp, reg_addr, (val | p) & ~m);
}
static void rtl_mdio_write(struct net_device *dev, int phy_id, int location,
int val)
{
struct rtl8169_private *tp = netdev_priv(dev);
rtl_writephy(tp, location, val);
}
static int rtl_mdio_read(struct net_device *dev, int phy_id, int location)
{
struct rtl8169_private *tp = netdev_priv(dev);
return rtl_readphy(tp, location);
}
static void rtl_ephy_write(void __iomem *ioaddr, int reg_addr, int value)
{
unsigned int i;
RTL_W32(EPHYAR, EPHYAR_WRITE_CMD | (value & EPHYAR_DATA_MASK) |
(reg_addr & EPHYAR_REG_MASK) << EPHYAR_REG_SHIFT);
for (i = 0; i < 100; i++) {
if (!(RTL_R32(EPHYAR) & EPHYAR_FLAG))
break;
udelay(10);
}
}
static u16 rtl_ephy_read(void __iomem *ioaddr, int reg_addr)
{
u16 value = 0xffff;
unsigned int i;
RTL_W32(EPHYAR, (reg_addr & EPHYAR_REG_MASK) << EPHYAR_REG_SHIFT);
for (i = 0; i < 100; i++) {
if (RTL_R32(EPHYAR) & EPHYAR_FLAG) {
value = RTL_R32(EPHYAR) & EPHYAR_DATA_MASK;
break;
}
udelay(10);
}
return value;
}
static void rtl_csi_write(void __iomem *ioaddr, int addr, int value)
{
unsigned int i;
RTL_W32(CSIDR, value);
RTL_W32(CSIAR, CSIAR_WRITE_CMD | (addr & CSIAR_ADDR_MASK) |
CSIAR_BYTE_ENABLE << CSIAR_BYTE_ENABLE_SHIFT);
for (i = 0; i < 100; i++) {
if (!(RTL_R32(CSIAR) & CSIAR_FLAG))
break;
udelay(10);
}
}
static u32 rtl_csi_read(void __iomem *ioaddr, int addr)
{
u32 value = ~0x00;
unsigned int i;
RTL_W32(CSIAR, (addr & CSIAR_ADDR_MASK) |
CSIAR_BYTE_ENABLE << CSIAR_BYTE_ENABLE_SHIFT);
for (i = 0; i < 100; i++) {
if (RTL_R32(CSIAR) & CSIAR_FLAG) {
value = RTL_R32(CSIDR);
break;
}
udelay(10);
}
return value;
}
static
void rtl_eri_write(void __iomem *ioaddr, int addr, u32 mask, u32 val, int type)
{
unsigned int i;
BUG_ON((addr & 3) || (mask == 0));
RTL_W32(ERIDR, val);
RTL_W32(ERIAR, ERIAR_WRITE_CMD | type | mask | addr);
for (i = 0; i < 100; i++) {
if (!(RTL_R32(ERIAR) & ERIAR_FLAG))
break;
udelay(100);
}
}
static u32 rtl_eri_read(void __iomem *ioaddr, int addr, int type)
{
u32 value = ~0x00;
unsigned int i;
RTL_W32(ERIAR, ERIAR_READ_CMD | type | ERIAR_MASK_1111 | addr);
for (i = 0; i < 100; i++) {
if (RTL_R32(ERIAR) & ERIAR_FLAG) {
value = RTL_R32(ERIDR);
break;
}
udelay(100);
}
return value;
}
static void
rtl_w1w0_eri(void __iomem *ioaddr, int addr, u32 mask, u32 p, u32 m, int type)
{
u32 val;
val = rtl_eri_read(ioaddr, addr, type);
rtl_eri_write(ioaddr, addr, mask, (val & ~m) | p, type);
}
static u8 rtl8168d_efuse_read(void __iomem *ioaddr, int reg_addr)
{
u8 value = 0xff;
unsigned int i;
RTL_W32(EFUSEAR, (reg_addr & EFUSEAR_REG_MASK) << EFUSEAR_REG_SHIFT);
for (i = 0; i < 300; i++) {
if (RTL_R32(EFUSEAR) & EFUSEAR_FLAG) {
value = RTL_R32(EFUSEAR) & EFUSEAR_DATA_MASK;
break;
}
udelay(100);
}
return value;
}
static void rtl8169_irq_mask_and_ack(void __iomem *ioaddr)
{
RTL_W16(IntrMask, 0x0000);
RTL_W16(IntrStatus, 0xffff);
}
static unsigned int rtl8169_tbi_reset_pending(struct rtl8169_private *tp)
{
void __iomem *ioaddr = tp->mmio_addr;
return RTL_R32(TBICSR) & TBIReset;
}
static unsigned int rtl8169_xmii_reset_pending(struct rtl8169_private *tp)
{
return rtl_readphy(tp, MII_BMCR) & BMCR_RESET;
}
static unsigned int rtl8169_tbi_link_ok(void __iomem *ioaddr)
{
return RTL_R32(TBICSR) & TBILinkOk;
}
static unsigned int rtl8169_xmii_link_ok(void __iomem *ioaddr)
{
return RTL_R8(PHYstatus) & LinkStatus;
}
static void rtl8169_tbi_reset_enable(struct rtl8169_private *tp)
{
void __iomem *ioaddr = tp->mmio_addr;
RTL_W32(TBICSR, RTL_R32(TBICSR) | TBIReset);
}
static void rtl8169_xmii_reset_enable(struct rtl8169_private *tp)
{
unsigned int val;
val = rtl_readphy(tp, MII_BMCR) | BMCR_RESET;
rtl_writephy(tp, MII_BMCR, val & 0xffff);
}
static void rtl_link_chg_patch(struct rtl8169_private *tp)
{
void __iomem *ioaddr = tp->mmio_addr;
struct net_device *dev = tp->dev;
if (!netif_running(dev))
return;
if (tp->mac_version == RTL_GIGA_MAC_VER_34) {
if (RTL_R8(PHYstatus) & _1000bpsF) {
rtl_eri_write(ioaddr, 0x1bc, ERIAR_MASK_1111,
0x00000011, ERIAR_EXGMAC);
rtl_eri_write(ioaddr, 0x1dc, ERIAR_MASK_1111,
0x00000005, ERIAR_EXGMAC);
} else if (RTL_R8(PHYstatus) & _100bps) {
rtl_eri_write(ioaddr, 0x1bc, ERIAR_MASK_1111,
0x0000001f, ERIAR_EXGMAC);
rtl_eri_write(ioaddr, 0x1dc, ERIAR_MASK_1111,
0x00000005, ERIAR_EXGMAC);
} else {
rtl_eri_write(ioaddr, 0x1bc, ERIAR_MASK_1111,
0x0000001f, ERIAR_EXGMAC);
rtl_eri_write(ioaddr, 0x1dc, ERIAR_MASK_1111,
0x0000003f, ERIAR_EXGMAC);
}
/* Reset packet filter */
rtl_w1w0_eri(ioaddr, 0xdc, ERIAR_MASK_0001, 0x00, 0x01,
ERIAR_EXGMAC);
rtl_w1w0_eri(ioaddr, 0xdc, ERIAR_MASK_0001, 0x01, 0x00,
ERIAR_EXGMAC);
}
}
static void __rtl8169_check_link_status(struct net_device *dev,
struct rtl8169_private *tp,
void __iomem *ioaddr, bool pm)
{
unsigned long flags;
spin_lock_irqsave(&tp->lock, flags);
if (tp->link_ok(ioaddr)) {
rtl_link_chg_patch(tp);
/* This is to cancel a scheduled suspend if there's one. */
if (pm)
pm_request_resume(&tp->pci_dev->dev);
netif_carrier_on(dev);
if (net_ratelimit())
netif_info(tp, ifup, dev, "link up\n");
} else {
netif_carrier_off(dev);
netif_info(tp, ifdown, dev, "link down\n");
if (pm)
pm_schedule_suspend(&tp->pci_dev->dev, 100);
}
spin_unlock_irqrestore(&tp->lock, flags);
}
static void rtl8169_check_link_status(struct net_device *dev,
struct rtl8169_private *tp,
void __iomem *ioaddr)
{
__rtl8169_check_link_status(dev, tp, ioaddr, false);
}
#define WAKE_ANY (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_BCAST | WAKE_MCAST)
static u32 __rtl8169_get_wol(struct rtl8169_private *tp)
{
void __iomem *ioaddr = tp->mmio_addr;
u8 options;
u32 wolopts = 0;
options = RTL_R8(Config1);
if (!(options & PMEnable))
return 0;
options = RTL_R8(Config3);
if (options & LinkUp)
wolopts |= WAKE_PHY;
if (options & MagicPacket)
wolopts |= WAKE_MAGIC;
options = RTL_R8(Config5);
if (options & UWF)
wolopts |= WAKE_UCAST;
if (options & BWF)
wolopts |= WAKE_BCAST;
if (options & MWF)
wolopts |= WAKE_MCAST;
return wolopts;
}
static void rtl8169_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
struct rtl8169_private *tp = netdev_priv(dev);
spin_lock_irq(&tp->lock);
wol->supported = WAKE_ANY;
wol->wolopts = __rtl8169_get_wol(tp);
spin_unlock_irq(&tp->lock);
}
static void __rtl8169_set_wol(struct rtl8169_private *tp, u32 wolopts)
{
void __iomem *ioaddr = tp->mmio_addr;
unsigned int i;
static const struct {
u32 opt;
u16 reg;
u8 mask;
} cfg[] = {
{ WAKE_ANY, Config1, PMEnable },
{ WAKE_PHY, Config3, LinkUp },
{ WAKE_MAGIC, Config3, MagicPacket },
{ WAKE_UCAST, Config5, UWF },
{ WAKE_BCAST, Config5, BWF },
{ WAKE_MCAST, Config5, MWF },
{ WAKE_ANY, Config5, LanWake }
};
RTL_W8(Cfg9346, Cfg9346_Unlock);
for (i = 0; i < ARRAY_SIZE(cfg); i++) {
u8 options = RTL_R8(cfg[i].reg) & ~cfg[i].mask;
if (wolopts & cfg[i].opt)
options |= cfg[i].mask;
RTL_W8(cfg[i].reg, options);
}
RTL_W8(Cfg9346, Cfg9346_Lock);
}
static int rtl8169_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
struct rtl8169_private *tp = netdev_priv(dev);
spin_lock_irq(&tp->lock);
if (wol->wolopts)
tp->features |= RTL_FEATURE_WOL;
else
tp->features &= ~RTL_FEATURE_WOL;
__rtl8169_set_wol(tp, wol->wolopts);
spin_unlock_irq(&tp->lock);
device_set_wakeup_enable(&tp->pci_dev->dev, wol->wolopts);
return 0;
}
static const char *rtl_lookup_firmware_name(struct rtl8169_private *tp)
{
return rtl_chip_infos[tp->mac_version].fw_name;
}
static void rtl8169_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
struct rtl8169_private *tp = netdev_priv(dev);
struct rtl_fw *rtl_fw = tp->rtl_fw;
strcpy(info->driver, MODULENAME);
strcpy(info->version, RTL8169_VERSION);
strcpy(info->bus_info, pci_name(tp->pci_dev));
BUILD_BUG_ON(sizeof(info->fw_version) < sizeof(rtl_fw->version));
strcpy(info->fw_version, IS_ERR_OR_NULL(rtl_fw) ? "N/A" :
rtl_fw->version);
}
static int rtl8169_get_regs_len(struct net_device *dev)
{
return R8169_REGS_SIZE;
}
static int rtl8169_set_speed_tbi(struct net_device *dev,
u8 autoneg, u16 speed, u8 duplex, u32 ignored)
{
struct rtl8169_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
int ret = 0;
u32 reg;
reg = RTL_R32(TBICSR);
if ((autoneg == AUTONEG_DISABLE) && (speed == SPEED_1000) &&
(duplex == DUPLEX_FULL)) {
RTL_W32(TBICSR, reg & ~(TBINwEnable | TBINwRestart));
} else if (autoneg == AUTONEG_ENABLE)
RTL_W32(TBICSR, reg | TBINwEnable | TBINwRestart);
else {
netif_warn(tp, link, dev,
"incorrect speed setting refused in TBI mode\n");
ret = -EOPNOTSUPP;
}
return ret;
}
static int rtl8169_set_speed_xmii(struct net_device *dev,
u8 autoneg, u16 speed, u8 duplex, u32 adv)
{
struct rtl8169_private *tp = netdev_priv(dev);
int giga_ctrl, bmcr;
int rc = -EINVAL;
rtl_writephy(tp, 0x1f, 0x0000);
if (autoneg == AUTONEG_ENABLE) {
int auto_nego;
auto_nego = rtl_readphy(tp, MII_ADVERTISE);
auto_nego &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL |
ADVERTISE_100HALF | ADVERTISE_100FULL);
if (adv & ADVERTISED_10baseT_Half)
auto_nego |= ADVERTISE_10HALF;
if (adv & ADVERTISED_10baseT_Full)
auto_nego |= ADVERTISE_10FULL;
if (adv & ADVERTISED_100baseT_Half)
auto_nego |= ADVERTISE_100HALF;
if (adv & ADVERTISED_100baseT_Full)
auto_nego |= ADVERTISE_100FULL;
auto_nego |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
giga_ctrl = rtl_readphy(tp, MII_CTRL1000);
giga_ctrl &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
r8169: sync with vendor's driver - add several PCI ID for the PCI-E adapters ; - new identification strings ; - the RTL_GIGA_MAC_VER_ defines have been renamed to closely match the out-of-tree driver. It makes the comparison less hairy ; - various magic ; - the PCI region for the device with PCI ID 0x8136 is guessed. Explanation: the in-kernel Linux driver is written to allow MM register accesses and avoid the IO tax. The relevant BAR register was found at base address 1 for the plain-old PCI 8169. User reported lspci show that it is found at base address 2 for the new Gigabit PCI-E 816{8/9}. Typically: 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.: Unknown device 8168 (rev 01) Subsystem: Unknown device 1631:e015 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 20 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at b800 [size=256] Region 2: Memory at ff7ff000 (64-bit, non-prefetchable) [size=4K] ^^^^^^^^ So far I have not received any lspci report for the 0x8136 and Realtek's driver do not help: be it under BSD or Linux, their r1000 driver include a USE_IO_SPACE #define but the bar address is always hardcoded to 1 in the MM case. :o/ - the 8168 has been reported to require an extra alignment for its receive buffers. The status of the 8167 and 8136 is not known in this regard. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-07-27 04:14:13 +07:00
/* The 8100e/8101e/8102e do Fast Ethernet only. */
if (tp->mii.supports_gmii) {
if (adv & ADVERTISED_1000baseT_Half)
giga_ctrl |= ADVERTISE_1000HALF;
if (adv & ADVERTISED_1000baseT_Full)
giga_ctrl |= ADVERTISE_1000FULL;
} else if (adv & (ADVERTISED_1000baseT_Half |
ADVERTISED_1000baseT_Full)) {
netif_info(tp, link, dev,
"PHY does not support 1000Mbps\n");
goto out;
r8169: sync with vendor's driver - add several PCI ID for the PCI-E adapters ; - new identification strings ; - the RTL_GIGA_MAC_VER_ defines have been renamed to closely match the out-of-tree driver. It makes the comparison less hairy ; - various magic ; - the PCI region for the device with PCI ID 0x8136 is guessed. Explanation: the in-kernel Linux driver is written to allow MM register accesses and avoid the IO tax. The relevant BAR register was found at base address 1 for the plain-old PCI 8169. User reported lspci show that it is found at base address 2 for the new Gigabit PCI-E 816{8/9}. Typically: 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.: Unknown device 8168 (rev 01) Subsystem: Unknown device 1631:e015 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 20 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at b800 [size=256] Region 2: Memory at ff7ff000 (64-bit, non-prefetchable) [size=4K] ^^^^^^^^ So far I have not received any lspci report for the 0x8136 and Realtek's driver do not help: be it under BSD or Linux, their r1000 driver include a USE_IO_SPACE #define but the bar address is always hardcoded to 1 in the MM case. :o/ - the 8168 has been reported to require an extra alignment for its receive buffers. The status of the 8167 and 8136 is not known in this regard. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-07-27 04:14:13 +07:00
}
bmcr = BMCR_ANENABLE | BMCR_ANRESTART;
rtl_writephy(tp, MII_ADVERTISE, auto_nego);
rtl_writephy(tp, MII_CTRL1000, giga_ctrl);
} else {
giga_ctrl = 0;
if (speed == SPEED_10)
bmcr = 0;
else if (speed == SPEED_100)
bmcr = BMCR_SPEED100;
else
goto out;
if (duplex == DUPLEX_FULL)
bmcr |= BMCR_FULLDPLX;
}
rtl_writephy(tp, MII_BMCR, bmcr);
if (tp->mac_version == RTL_GIGA_MAC_VER_02 ||
tp->mac_version == RTL_GIGA_MAC_VER_03) {
if ((speed == SPEED_100) && (autoneg != AUTONEG_ENABLE)) {
rtl_writephy(tp, 0x17, 0x2138);
rtl_writephy(tp, 0x0e, 0x0260);
} else {
rtl_writephy(tp, 0x17, 0x2108);
rtl_writephy(tp, 0x0e, 0x0000);
}
}
rc = 0;
out:
return rc;
}
static int rtl8169_set_speed(struct net_device *dev,
u8 autoneg, u16 speed, u8 duplex, u32 advertising)
{
struct rtl8169_private *tp = netdev_priv(dev);
int ret;
ret = tp->set_speed(dev, autoneg, speed, duplex, advertising);
if (ret < 0)
goto out;
if (netif_running(dev) && (autoneg == AUTONEG_ENABLE) &&
(advertising & ADVERTISED_1000baseT_Full)) {
mod_timer(&tp->timer, jiffies + RTL8169_PHY_TIMEOUT);
}
out:
return ret;
}
static int rtl8169_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct rtl8169_private *tp = netdev_priv(dev);
unsigned long flags;
int ret;
del_timer_sync(&tp->timer);
spin_lock_irqsave(&tp->lock, flags);
ret = rtl8169_set_speed(dev, cmd->autoneg, ethtool_cmd_speed(cmd),
cmd->duplex, cmd->advertising);
spin_unlock_irqrestore(&tp->lock, flags);
return ret;
}
static u32 rtl8169_fix_features(struct net_device *dev, u32 features)
{
if (dev->mtu > TD_MSS_MAX)
features &= ~NETIF_F_ALL_TSO;
return features;
}
static int rtl8169_set_features(struct net_device *dev, u32 features)
{
struct rtl8169_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
unsigned long flags;
spin_lock_irqsave(&tp->lock, flags);
if (features & NETIF_F_RXCSUM)
tp->cp_cmd |= RxChkSum;
else
tp->cp_cmd &= ~RxChkSum;
if (dev->features & NETIF_F_HW_VLAN_RX)
tp->cp_cmd |= RxVlan;
else
tp->cp_cmd &= ~RxVlan;
RTL_W16(CPlusCmd, tp->cp_cmd);
RTL_R16(CPlusCmd);
spin_unlock_irqrestore(&tp->lock, flags);
return 0;
}
static inline u32 rtl8169_tx_vlan_tag(struct rtl8169_private *tp,
struct sk_buff *skb)
{
return (vlan_tx_tag_present(skb)) ?
TxVlanTag | swab16(vlan_tx_tag_get(skb)) : 0x00;
}
static void rtl8169_rx_vlan_tag(struct RxDesc *desc, struct sk_buff *skb)
{
u32 opts2 = le32_to_cpu(desc->opts2);
if (opts2 & RxVlanTag)
__vlan_hwaccel_put_tag(skb, swab16(opts2 & 0xffff));
desc->opts2 = 0;
}
static int rtl8169_gset_tbi(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct rtl8169_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
u32 status;
cmd->supported =
SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg | SUPPORTED_FIBRE;
cmd->port = PORT_FIBRE;
cmd->transceiver = XCVR_INTERNAL;
status = RTL_R32(TBICSR);
cmd->advertising = (status & TBINwEnable) ? ADVERTISED_Autoneg : 0;
cmd->autoneg = !!(status & TBINwEnable);
ethtool_cmd_speed_set(cmd, SPEED_1000);
cmd->duplex = DUPLEX_FULL; /* Always set */
return 0;
}
static int rtl8169_gset_xmii(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct rtl8169_private *tp = netdev_priv(dev);
return mii_ethtool_gset(&tp->mii, cmd);
}
static int rtl8169_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct rtl8169_private *tp = netdev_priv(dev);
unsigned long flags;
int rc;
spin_lock_irqsave(&tp->lock, flags);
rc = tp->get_settings(dev, cmd);
spin_unlock_irqrestore(&tp->lock, flags);
return rc;
}
static void rtl8169_get_regs(struct net_device *dev, struct ethtool_regs *regs,
void *p)
{
struct rtl8169_private *tp = netdev_priv(dev);
unsigned long flags;
if (regs->len > R8169_REGS_SIZE)
regs->len = R8169_REGS_SIZE;
spin_lock_irqsave(&tp->lock, flags);
memcpy_fromio(p, tp->mmio_addr, regs->len);
spin_unlock_irqrestore(&tp->lock, flags);
}
static u32 rtl8169_get_msglevel(struct net_device *dev)
{
struct rtl8169_private *tp = netdev_priv(dev);
return tp->msg_enable;
}
static void rtl8169_set_msglevel(struct net_device *dev, u32 value)
{
struct rtl8169_private *tp = netdev_priv(dev);
tp->msg_enable = value;
}
static const char rtl8169_gstrings[][ETH_GSTRING_LEN] = {
"tx_packets",
"rx_packets",
"tx_errors",
"rx_errors",
"rx_missed",
"align_errors",
"tx_single_collisions",
"tx_multi_collisions",
"unicast",
"broadcast",
"multicast",
"tx_aborted",
"tx_underrun",
};
static int rtl8169_get_sset_count(struct net_device *dev, int sset)
{
switch (sset) {
case ETH_SS_STATS:
return ARRAY_SIZE(rtl8169_gstrings);
default:
return -EOPNOTSUPP;
}
}
static void rtl8169_update_counters(struct net_device *dev)
{
struct rtl8169_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
struct device *d = &tp->pci_dev->dev;
struct rtl8169_counters *counters;
dma_addr_t paddr;
u32 cmd;
int wait = 1000;
/*
* Some chips are unable to dump tally counters when the receiver
* is disabled.
*/
if ((RTL_R8(ChipCmd) & CmdRxEnb) == 0)
return;
counters = dma_alloc_coherent(d, sizeof(*counters), &paddr, GFP_KERNEL);
if (!counters)
return;
RTL_W32(CounterAddrHigh, (u64)paddr >> 32);
cmd = (u64)paddr & DMA_BIT_MASK(32);
RTL_W32(CounterAddrLow, cmd);
RTL_W32(CounterAddrLow, cmd | CounterDump);
while (wait--) {
if ((RTL_R32(CounterAddrLow) & CounterDump) == 0) {
memcpy(&tp->counters, counters, sizeof(*counters));
break;
}
udelay(10);
}
RTL_W32(CounterAddrLow, 0);
RTL_W32(CounterAddrHigh, 0);
dma_free_coherent(d, sizeof(*counters), counters, paddr);
}
static void rtl8169_get_ethtool_stats(struct net_device *dev,
struct ethtool_stats *stats, u64 *data)
{
struct rtl8169_private *tp = netdev_priv(dev);
ASSERT_RTNL();
rtl8169_update_counters(dev);
data[0] = le64_to_cpu(tp->counters.tx_packets);
data[1] = le64_to_cpu(tp->counters.rx_packets);
data[2] = le64_to_cpu(tp->counters.tx_errors);
data[3] = le32_to_cpu(tp->counters.rx_errors);
data[4] = le16_to_cpu(tp->counters.rx_missed);
data[5] = le16_to_cpu(tp->counters.align_errors);
data[6] = le32_to_cpu(tp->counters.tx_one_collision);
data[7] = le32_to_cpu(tp->counters.tx_multi_collision);
data[8] = le64_to_cpu(tp->counters.rx_unicast);
data[9] = le64_to_cpu(tp->counters.rx_broadcast);
data[10] = le32_to_cpu(tp->counters.rx_multicast);
data[11] = le16_to_cpu(tp->counters.tx_aborted);
data[12] = le16_to_cpu(tp->counters.tx_underun);
}
static void rtl8169_get_strings(struct net_device *dev, u32 stringset, u8 *data)
{
switch(stringset) {
case ETH_SS_STATS:
memcpy(data, *rtl8169_gstrings, sizeof(rtl8169_gstrings));
break;
}
}
static const struct ethtool_ops rtl8169_ethtool_ops = {
.get_drvinfo = rtl8169_get_drvinfo,
.get_regs_len = rtl8169_get_regs_len,
.get_link = ethtool_op_get_link,
.get_settings = rtl8169_get_settings,
.set_settings = rtl8169_set_settings,
.get_msglevel = rtl8169_get_msglevel,
.set_msglevel = rtl8169_set_msglevel,
.get_regs = rtl8169_get_regs,
.get_wol = rtl8169_get_wol,
.set_wol = rtl8169_set_wol,
.get_strings = rtl8169_get_strings,
.get_sset_count = rtl8169_get_sset_count,
.get_ethtool_stats = rtl8169_get_ethtool_stats,
};
static void rtl8169_get_mac_version(struct rtl8169_private *tp,
struct net_device *dev, u8 default_version)
{
void __iomem *ioaddr = tp->mmio_addr;
/*
* The driver currently handles the 8168Bf and the 8168Be identically
* but they can be identified more specifically through the test below
* if needed:
*
* (RTL_R32(TxConfig) & 0x700000) == 0x500000 ? 8168Bf : 8168Be
*
* Same thing for the 8101Eb and the 8101Ec:
*
* (RTL_R32(TxConfig) & 0x700000) == 0x200000 ? 8101Eb : 8101Ec
*/
static const struct rtl_mac_info {
u32 mask;
u32 val;
int mac_version;
} mac_info[] = {
/* 8168E family. */
{ 0x7c800000, 0x2c800000, RTL_GIGA_MAC_VER_34 },
{ 0x7cf00000, 0x2c200000, RTL_GIGA_MAC_VER_33 },
{ 0x7cf00000, 0x2c100000, RTL_GIGA_MAC_VER_32 },
{ 0x7c800000, 0x2c000000, RTL_GIGA_MAC_VER_33 },
/* 8168D family. */
{ 0x7cf00000, 0x28300000, RTL_GIGA_MAC_VER_26 },
{ 0x7cf00000, 0x28100000, RTL_GIGA_MAC_VER_25 },
{ 0x7c800000, 0x28000000, RTL_GIGA_MAC_VER_26 },
/* 8168DP family. */
{ 0x7cf00000, 0x28800000, RTL_GIGA_MAC_VER_27 },
{ 0x7cf00000, 0x28a00000, RTL_GIGA_MAC_VER_28 },
{ 0x7cf00000, 0x28b00000, RTL_GIGA_MAC_VER_31 },
/* 8168C family. */
{ 0x7cf00000, 0x3cb00000, RTL_GIGA_MAC_VER_24 },
{ 0x7cf00000, 0x3c900000, RTL_GIGA_MAC_VER_23 },
{ 0x7cf00000, 0x3c800000, RTL_GIGA_MAC_VER_18 },
{ 0x7c800000, 0x3c800000, RTL_GIGA_MAC_VER_24 },
{ 0x7cf00000, 0x3c000000, RTL_GIGA_MAC_VER_19 },
{ 0x7cf00000, 0x3c200000, RTL_GIGA_MAC_VER_20 },
{ 0x7cf00000, 0x3c300000, RTL_GIGA_MAC_VER_21 },
{ 0x7cf00000, 0x3c400000, RTL_GIGA_MAC_VER_22 },
{ 0x7c800000, 0x3c000000, RTL_GIGA_MAC_VER_22 },
/* 8168B family. */
{ 0x7cf00000, 0x38000000, RTL_GIGA_MAC_VER_12 },
{ 0x7cf00000, 0x38500000, RTL_GIGA_MAC_VER_17 },
{ 0x7c800000, 0x38000000, RTL_GIGA_MAC_VER_17 },
{ 0x7c800000, 0x30000000, RTL_GIGA_MAC_VER_11 },
/* 8101 family. */
{ 0x7cf00000, 0x40b00000, RTL_GIGA_MAC_VER_30 },
{ 0x7cf00000, 0x40a00000, RTL_GIGA_MAC_VER_30 },
{ 0x7cf00000, 0x40900000, RTL_GIGA_MAC_VER_29 },
{ 0x7c800000, 0x40800000, RTL_GIGA_MAC_VER_30 },
{ 0x7cf00000, 0x34a00000, RTL_GIGA_MAC_VER_09 },
{ 0x7cf00000, 0x24a00000, RTL_GIGA_MAC_VER_09 },
{ 0x7cf00000, 0x34900000, RTL_GIGA_MAC_VER_08 },
{ 0x7cf00000, 0x24900000, RTL_GIGA_MAC_VER_08 },
{ 0x7cf00000, 0x34800000, RTL_GIGA_MAC_VER_07 },
{ 0x7cf00000, 0x24800000, RTL_GIGA_MAC_VER_07 },
{ 0x7cf00000, 0x34000000, RTL_GIGA_MAC_VER_13 },
{ 0x7cf00000, 0x34300000, RTL_GIGA_MAC_VER_10 },
{ 0x7cf00000, 0x34200000, RTL_GIGA_MAC_VER_16 },
{ 0x7c800000, 0x34800000, RTL_GIGA_MAC_VER_09 },
{ 0x7c800000, 0x24800000, RTL_GIGA_MAC_VER_09 },
{ 0x7c800000, 0x34000000, RTL_GIGA_MAC_VER_16 },
/* FIXME: where did these entries come from ? -- FR */
{ 0xfc800000, 0x38800000, RTL_GIGA_MAC_VER_15 },
{ 0xfc800000, 0x30800000, RTL_GIGA_MAC_VER_14 },
/* 8110 family. */
{ 0xfc800000, 0x98000000, RTL_GIGA_MAC_VER_06 },
{ 0xfc800000, 0x18000000, RTL_GIGA_MAC_VER_05 },
{ 0xfc800000, 0x10000000, RTL_GIGA_MAC_VER_04 },
{ 0xfc800000, 0x04000000, RTL_GIGA_MAC_VER_03 },
{ 0xfc800000, 0x00800000, RTL_GIGA_MAC_VER_02 },
{ 0xfc800000, 0x00000000, RTL_GIGA_MAC_VER_01 },
/* Catch-all */
{ 0x00000000, 0x00000000, RTL_GIGA_MAC_NONE }
};
const struct rtl_mac_info *p = mac_info;
u32 reg;
reg = RTL_R32(TxConfig);
while ((reg & p->mask) != p->val)
p++;
tp->mac_version = p->mac_version;
if (tp->mac_version == RTL_GIGA_MAC_NONE) {
netif_notice(tp, probe, dev,
"unknown MAC, using family default\n");
tp->mac_version = default_version;
}
}
static void rtl8169_print_mac_version(struct rtl8169_private *tp)
{
r8169: sync with vendor's driver - add several PCI ID for the PCI-E adapters ; - new identification strings ; - the RTL_GIGA_MAC_VER_ defines have been renamed to closely match the out-of-tree driver. It makes the comparison less hairy ; - various magic ; - the PCI region for the device with PCI ID 0x8136 is guessed. Explanation: the in-kernel Linux driver is written to allow MM register accesses and avoid the IO tax. The relevant BAR register was found at base address 1 for the plain-old PCI 8169. User reported lspci show that it is found at base address 2 for the new Gigabit PCI-E 816{8/9}. Typically: 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.: Unknown device 8168 (rev 01) Subsystem: Unknown device 1631:e015 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 20 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at b800 [size=256] Region 2: Memory at ff7ff000 (64-bit, non-prefetchable) [size=4K] ^^^^^^^^ So far I have not received any lspci report for the 0x8136 and Realtek's driver do not help: be it under BSD or Linux, their r1000 driver include a USE_IO_SPACE #define but the bar address is always hardcoded to 1 in the MM case. :o/ - the 8168 has been reported to require an extra alignment for its receive buffers. The status of the 8167 and 8136 is not known in this regard. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-07-27 04:14:13 +07:00
dprintk("mac_version = 0x%02x\n", tp->mac_version);
}
struct phy_reg {
u16 reg;
u16 val;
};
static void rtl_writephy_batch(struct rtl8169_private *tp,
const struct phy_reg *regs, int len)
{
while (len-- > 0) {
rtl_writephy(tp, regs->reg, regs->val);
regs++;
}
}
#define PHY_READ 0x00000000
#define PHY_DATA_OR 0x10000000
#define PHY_DATA_AND 0x20000000
#define PHY_BJMPN 0x30000000
#define PHY_READ_EFUSE 0x40000000
#define PHY_READ_MAC_BYTE 0x50000000
#define PHY_WRITE_MAC_BYTE 0x60000000
#define PHY_CLEAR_READCOUNT 0x70000000
#define PHY_WRITE 0x80000000
#define PHY_READCOUNT_EQ_SKIP 0x90000000
#define PHY_COMP_EQ_SKIPN 0xa0000000
#define PHY_COMP_NEQ_SKIPN 0xb0000000
#define PHY_WRITE_PREVIOUS 0xc0000000
#define PHY_SKIPN 0xd0000000
#define PHY_DELAY_MS 0xe0000000
#define PHY_WRITE_ERI_WORD 0xf0000000
struct fw_info {
u32 magic;
char version[RTL_VER_SIZE];
__le32 fw_start;
__le32 fw_len;
u8 chksum;
} __packed;
#define FW_OPCODE_SIZE sizeof(typeof(*((struct rtl_fw_phy_action *)0)->code))
static bool rtl_fw_format_ok(struct rtl8169_private *tp, struct rtl_fw *rtl_fw)
{
const struct firmware *fw = rtl_fw->fw;
struct fw_info *fw_info = (struct fw_info *)fw->data;
struct rtl_fw_phy_action *pa = &rtl_fw->phy_action;
char *version = rtl_fw->version;
bool rc = false;
if (fw->size < FW_OPCODE_SIZE)
goto out;
if (!fw_info->magic) {
size_t i, size, start;
u8 checksum = 0;
if (fw->size < sizeof(*fw_info))
goto out;
for (i = 0; i < fw->size; i++)
checksum += fw->data[i];
if (checksum != 0)
goto out;
start = le32_to_cpu(fw_info->fw_start);
if (start > fw->size)
goto out;
size = le32_to_cpu(fw_info->fw_len);
if (size > (fw->size - start) / FW_OPCODE_SIZE)
goto out;
memcpy(version, fw_info->version, RTL_VER_SIZE);
pa->code = (__le32 *)(fw->data + start);
pa->size = size;
} else {
if (fw->size % FW_OPCODE_SIZE)
goto out;
strlcpy(version, rtl_lookup_firmware_name(tp), RTL_VER_SIZE);
pa->code = (__le32 *)fw->data;
pa->size = fw->size / FW_OPCODE_SIZE;
}
version[RTL_VER_SIZE - 1] = 0;
rc = true;
out:
return rc;
}
static bool rtl_fw_data_ok(struct rtl8169_private *tp, struct net_device *dev,
struct rtl_fw_phy_action *pa)
{
bool rc = false;
size_t index;
for (index = 0; index < pa->size; index++) {
u32 action = le32_to_cpu(pa->code[index]);
u32 regno = (action & 0x0fff0000) >> 16;
switch(action & 0xf0000000) {
case PHY_READ:
case PHY_DATA_OR:
case PHY_DATA_AND:
case PHY_READ_EFUSE:
case PHY_CLEAR_READCOUNT:
case PHY_WRITE:
case PHY_WRITE_PREVIOUS:
case PHY_DELAY_MS:
break;
case PHY_BJMPN:
if (regno > index) {
netif_err(tp, ifup, tp->dev,
"Out of range of firmware\n");
goto out;
}
break;
case PHY_READCOUNT_EQ_SKIP:
if (index + 2 >= pa->size) {
netif_err(tp, ifup, tp->dev,
"Out of range of firmware\n");
goto out;
}
break;
case PHY_COMP_EQ_SKIPN:
case PHY_COMP_NEQ_SKIPN:
case PHY_SKIPN:
if (index + 1 + regno >= pa->size) {
netif_err(tp, ifup, tp->dev,
"Out of range of firmware\n");
goto out;
}
break;
case PHY_READ_MAC_BYTE:
case PHY_WRITE_MAC_BYTE:
case PHY_WRITE_ERI_WORD:
default:
netif_err(tp, ifup, tp->dev,
"Invalid action 0x%08x\n", action);
goto out;
}
}
rc = true;
out:
return rc;
}
static int rtl_check_firmware(struct rtl8169_private *tp, struct rtl_fw *rtl_fw)
{
struct net_device *dev = tp->dev;
int rc = -EINVAL;
if (!rtl_fw_format_ok(tp, rtl_fw)) {
netif_err(tp, ifup, dev, "invalid firwmare\n");
goto out;
}
if (rtl_fw_data_ok(tp, dev, &rtl_fw->phy_action))
rc = 0;
out:
return rc;
}
static void rtl_phy_write_fw(struct rtl8169_private *tp, struct rtl_fw *rtl_fw)
{
struct rtl_fw_phy_action *pa = &rtl_fw->phy_action;
u32 predata, count;
size_t index;
predata = count = 0;
for (index = 0; index < pa->size; ) {
u32 action = le32_to_cpu(pa->code[index]);
u32 data = action & 0x0000ffff;
u32 regno = (action & 0x0fff0000) >> 16;
if (!action)
break;
switch(action & 0xf0000000) {
case PHY_READ:
predata = rtl_readphy(tp, regno);
count++;
index++;
break;
case PHY_DATA_OR:
predata |= data;
index++;
break;
case PHY_DATA_AND:
predata &= data;
index++;
break;
case PHY_BJMPN:
index -= regno;
break;
case PHY_READ_EFUSE:
predata = rtl8168d_efuse_read(tp->mmio_addr, regno);
index++;
break;
case PHY_CLEAR_READCOUNT:
count = 0;
index++;
break;
case PHY_WRITE:
rtl_writephy(tp, regno, data);
index++;
break;
case PHY_READCOUNT_EQ_SKIP:
index += (count == data) ? 2 : 1;
break;
case PHY_COMP_EQ_SKIPN:
if (predata == data)
index += regno;
index++;
break;
case PHY_COMP_NEQ_SKIPN:
if (predata != data)
index += regno;
index++;
break;
case PHY_WRITE_PREVIOUS:
rtl_writephy(tp, regno, predata);
index++;
break;
case PHY_SKIPN:
index += regno + 1;
break;
case PHY_DELAY_MS:
mdelay(data);
index++;
break;
case PHY_READ_MAC_BYTE:
case PHY_WRITE_MAC_BYTE:
case PHY_WRITE_ERI_WORD:
default:
BUG();
}
}
}
static void rtl_release_firmware(struct rtl8169_private *tp)
{
if (!IS_ERR_OR_NULL(tp->rtl_fw)) {
release_firmware(tp->rtl_fw->fw);
kfree(tp->rtl_fw);
}
tp->rtl_fw = RTL_FIRMWARE_UNKNOWN;
}
static void rtl_apply_firmware(struct rtl8169_private *tp)
{
struct rtl_fw *rtl_fw = tp->rtl_fw;
/* TODO: release firmware once rtl_phy_write_fw signals failures. */
if (!IS_ERR_OR_NULL(rtl_fw))
rtl_phy_write_fw(tp, rtl_fw);
}
static void rtl_apply_firmware_cond(struct rtl8169_private *tp, u8 reg, u16 val)
{
if (rtl_readphy(tp, reg) != val)
netif_warn(tp, hw, tp->dev, "chipset not ready for firmware\n");
else
rtl_apply_firmware(tp);
}
static void rtl8169s_hw_phy_config(struct rtl8169_private *tp)
{
static const struct phy_reg phy_reg_init[] = {
{ 0x1f, 0x0001 },
{ 0x06, 0x006e },
{ 0x08, 0x0708 },
{ 0x15, 0x4000 },
{ 0x18, 0x65c7 },
{ 0x1f, 0x0001 },
{ 0x03, 0x00a1 },
{ 0x02, 0x0008 },
{ 0x01, 0x0120 },
{ 0x00, 0x1000 },
{ 0x04, 0x0800 },
{ 0x04, 0x0000 },
{ 0x03, 0xff41 },
{ 0x02, 0xdf60 },
{ 0x01, 0x0140 },
{ 0x00, 0x0077 },
{ 0x04, 0x7800 },
{ 0x04, 0x7000 },
{ 0x03, 0x802f },
{ 0x02, 0x4f02 },
{ 0x01, 0x0409 },
{ 0x00, 0xf0f9 },
{ 0x04, 0x9800 },
{ 0x04, 0x9000 },
{ 0x03, 0xdf01 },
{ 0x02, 0xdf20 },
{ 0x01, 0xff95 },
{ 0x00, 0xba00 },
{ 0x04, 0xa800 },
{ 0x04, 0xa000 },
{ 0x03, 0xff41 },
{ 0x02, 0xdf20 },
{ 0x01, 0x0140 },
{ 0x00, 0x00bb },
{ 0x04, 0xb800 },
{ 0x04, 0xb000 },
{ 0x03, 0xdf41 },
{ 0x02, 0xdc60 },
{ 0x01, 0x6340 },
{ 0x00, 0x007d },
{ 0x04, 0xd800 },
{ 0x04, 0xd000 },
{ 0x03, 0xdf01 },
{ 0x02, 0xdf20 },
{ 0x01, 0x100a },
{ 0x00, 0xa0ff },
{ 0x04, 0xf800 },
{ 0x04, 0xf000 },
{ 0x1f, 0x0000 },
{ 0x0b, 0x0000 },
{ 0x00, 0x9200 }
};
rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
}
static void rtl8169sb_hw_phy_config(struct rtl8169_private *tp)
{
static const struct phy_reg phy_reg_init[] = {
{ 0x1f, 0x0002 },
{ 0x01, 0x90d0 },
{ 0x1f, 0x0000 }
};
rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
}
static void rtl8169scd_hw_phy_config_quirk(struct rtl8169_private *tp)
{
struct pci_dev *pdev = tp->pci_dev;
if ((pdev->subsystem_vendor != PCI_VENDOR_ID_GIGABYTE) ||
(pdev->subsystem_device != 0xe000))
return;
rtl_writephy(tp, 0x1f, 0x0001);
rtl_writephy(tp, 0x10, 0xf01b);
rtl_writephy(tp, 0x1f, 0x0000);
}
static void rtl8169scd_hw_phy_config(struct rtl8169_private *tp)
{
static const struct phy_reg phy_reg_init[] = {
{ 0x1f, 0x0001 },
{ 0x04, 0x0000 },
{ 0x03, 0x00a1 },
{ 0x02, 0x0008 },
{ 0x01, 0x0120 },
{ 0x00, 0x1000 },
{ 0x04, 0x0800 },
{ 0x04, 0x9000 },
{ 0x03, 0x802f },
{ 0x02, 0x4f02 },
{ 0x01, 0x0409 },
{ 0x00, 0xf099 },
{ 0x04, 0x9800 },
{ 0x04, 0xa000 },
{ 0x03, 0xdf01 },
{ 0x02, 0xdf20 },
{ 0x01, 0xff95 },
{ 0x00, 0xba00 },
{ 0x04, 0xa800 },
{ 0x04, 0xf000 },
{ 0x03, 0xdf01 },
{ 0x02, 0xdf20 },
{ 0x01, 0x101a },
{ 0x00, 0xa0ff },
{ 0x04, 0xf800 },
{ 0x04, 0x0000 },
{ 0x1f, 0x0000 },
{ 0x1f, 0x0001 },
{ 0x10, 0xf41b },
{ 0x14, 0xfb54 },
{ 0x18, 0xf5c7 },
{ 0x1f, 0x0000 },
{ 0x1f, 0x0001 },
{ 0x17, 0x0cc0 },
{ 0x1f, 0x0000 }
};
rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
rtl8169scd_hw_phy_config_quirk(tp);
}
static void rtl8169sce_hw_phy_config(struct rtl8169_private *tp)
{
static const struct phy_reg phy_reg_init[] = {
{ 0x1f, 0x0001 },
{ 0x04, 0x0000 },
{ 0x03, 0x00a1 },
{ 0x02, 0x0008 },
{ 0x01, 0x0120 },
{ 0x00, 0x1000 },
{ 0x04, 0x0800 },
{ 0x04, 0x9000 },
{ 0x03, 0x802f },
{ 0x02, 0x4f02 },
{ 0x01, 0x0409 },
{ 0x00, 0xf099 },
{ 0x04, 0x9800 },
{ 0x04, 0xa000 },
{ 0x03, 0xdf01 },
{ 0x02, 0xdf20 },
{ 0x01, 0xff95 },
{ 0x00, 0xba00 },
{ 0x04, 0xa800 },
{ 0x04, 0xf000 },
{ 0x03, 0xdf01 },
{ 0x02, 0xdf20 },
{ 0x01, 0x101a },
{ 0x00, 0xa0ff },
{ 0x04, 0xf800 },
{ 0x04, 0x0000 },
{ 0x1f, 0x0000 },
{ 0x1f, 0x0001 },
{ 0x0b, 0x8480 },
{ 0x1f, 0x0000 },
{ 0x1f, 0x0001 },
{ 0x18, 0x67c7 },
{ 0x04, 0x2000 },
{ 0x03, 0x002f },
{ 0x02, 0x4360 },
{ 0x01, 0x0109 },
{ 0x00, 0x3022 },
{ 0x04, 0x2800 },
{ 0x1f, 0x0000 },
{ 0x1f, 0x0001 },
{ 0x17, 0x0cc0 },
{ 0x1f, 0x0000 }
};
rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
}
static void rtl8168bb_hw_phy_config(struct rtl8169_private *tp)
{
static const struct phy_reg phy_reg_init[] = {
{ 0x10, 0xf41b },
{ 0x1f, 0x0000 }
};
rtl_writephy(tp, 0x1f, 0x0001);
rtl_patchphy(tp, 0x16, 1 << 0);
rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
}
static void rtl8168bef_hw_phy_config(struct rtl8169_private *tp)
{
static const struct phy_reg phy_reg_init[] = {
{ 0x1f, 0x0001 },
{ 0x10, 0xf41b },
{ 0x1f, 0x0000 }
};
rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
}
static void rtl8168cp_1_hw_phy_config(struct rtl8169_private *tp)
{
static const struct phy_reg phy_reg_init[] = {
{ 0x1f, 0x0000 },
{ 0x1d, 0x0f00 },
{ 0x1f, 0x0002 },
{ 0x0c, 0x1ec8 },
{ 0x1f, 0x0000 }
};
rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
}
static void rtl8168cp_2_hw_phy_config(struct rtl8169_private *tp)
{
static const struct phy_reg phy_reg_init[] = {
{ 0x1f, 0x0001 },
{ 0x1d, 0x3d98 },
{ 0x1f, 0x0000 }
};
rtl_writephy(tp, 0x1f, 0x0000);
rtl_patchphy(tp, 0x14, 1 << 5);
rtl_patchphy(tp, 0x0d, 1 << 5);
rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
}
static void rtl8168c_1_hw_phy_config(struct rtl8169_private *tp)
{
static const struct phy_reg phy_reg_init[] = {
{ 0x1f, 0x0001 },
{ 0x12, 0x2300 },
{ 0x1f, 0x0002 },
{ 0x00, 0x88d4 },
{ 0x01, 0x82b1 },
{ 0x03, 0x7002 },
{ 0x08, 0x9e30 },
{ 0x09, 0x01f0 },
{ 0x0a, 0x5500 },
{ 0x0c, 0x00c8 },
{ 0x1f, 0x0003 },
{ 0x12, 0xc096 },
{ 0x16, 0x000a },
{ 0x1f, 0x0000 },
{ 0x1f, 0x0000 },
{ 0x09, 0x2000 },
{ 0x09, 0x0000 }
};
rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
rtl_patchphy(tp, 0x14, 1 << 5);
rtl_patchphy(tp, 0x0d, 1 << 5);
rtl_writephy(tp, 0x1f, 0x0000);
}
static void rtl8168c_2_hw_phy_config(struct rtl8169_private *tp)
{
static const struct phy_reg phy_reg_init[] = {
{ 0x1f, 0x0001 },
{ 0x12, 0x2300 },
{ 0x03, 0x802f },
{ 0x02, 0x4f02 },
{ 0x01, 0x0409 },
{ 0x00, 0xf099 },
{ 0x04, 0x9800 },
{ 0x04, 0x9000 },
{ 0x1d, 0x3d98 },
{ 0x1f, 0x0002 },
{ 0x0c, 0x7eb8 },
{ 0x06, 0x0761 },
{ 0x1f, 0x0003 },
{ 0x16, 0x0f0a },
{ 0x1f, 0x0000 }
};
rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
rtl_patchphy(tp, 0x16, 1 << 0);
rtl_patchphy(tp, 0x14, 1 << 5);
rtl_patchphy(tp, 0x0d, 1 << 5);
rtl_writephy(tp, 0x1f, 0x0000);
}
static void rtl8168c_3_hw_phy_config(struct rtl8169_private *tp)
{
static const struct phy_reg phy_reg_init[] = {
{ 0x1f, 0x0001 },
{ 0x12, 0x2300 },
{ 0x1d, 0x3d98 },
{ 0x1f, 0x0002 },
{ 0x0c, 0x7eb8 },
{ 0x06, 0x5461 },
{ 0x1f, 0x0003 },
{ 0x16, 0x0f0a },
{ 0x1f, 0x0000 }
};
rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
rtl_patchphy(tp, 0x16, 1 << 0);
rtl_patchphy(tp, 0x14, 1 << 5);
rtl_patchphy(tp, 0x0d, 1 << 5);
rtl_writephy(tp, 0x1f, 0x0000);
}
static void rtl8168c_4_hw_phy_config(struct rtl8169_private *tp)
{
rtl8168c_3_hw_phy_config(tp);
}
static void rtl8168d_1_hw_phy_config(struct rtl8169_private *tp)
{
static const struct phy_reg phy_reg_init_0[] = {
/* Channel Estimation */
{ 0x1f, 0x0001 },
{ 0x06, 0x4064 },
{ 0x07, 0x2863 },
{ 0x08, 0x059c },
{ 0x09, 0x26b4 },
{ 0x0a, 0x6a19 },
{ 0x0b, 0xdcc8 },
{ 0x10, 0xf06d },
{ 0x14, 0x7f68 },
{ 0x18, 0x7fd9 },
{ 0x1c, 0xf0ff },
{ 0x1d, 0x3d9c },
{ 0x1f, 0x0003 },
{ 0x12, 0xf49f },
{ 0x13, 0x070b },
{ 0x1a, 0x05ad },
{ 0x14, 0x94c0 },
/*
* Tx Error Issue
* Enhance line driver power
*/
{ 0x1f, 0x0002 },
{ 0x06, 0x5561 },
{ 0x1f, 0x0005 },
{ 0x05, 0x8332 },
{ 0x06, 0x5561 },
/*
* Can not link to 1Gbps with bad cable
* Decrease SNR threshold form 21.07dB to 19.04dB
*/
{ 0x1f, 0x0001 },
{ 0x17, 0x0cc0 },
{ 0x1f, 0x0000 },
{ 0x0d, 0xf880 }
};
void __iomem *ioaddr = tp->mmio_addr;
rtl_writephy_batch(tp, phy_reg_init_0, ARRAY_SIZE(phy_reg_init_0));
/*
* Rx Error Issue
* Fine Tune Switching regulator parameter
*/
rtl_writephy(tp, 0x1f, 0x0002);
rtl_w1w0_phy(tp, 0x0b, 0x0010, 0x00ef);
rtl_w1w0_phy(tp, 0x0c, 0xa200, 0x5d00);
if (rtl8168d_efuse_read(ioaddr, 0x01) == 0xb1) {
static const struct phy_reg phy_reg_init[] = {
{ 0x1f, 0x0002 },
{ 0x05, 0x669a },
{ 0x1f, 0x0005 },
{ 0x05, 0x8330 },
{ 0x06, 0x669a },
{ 0x1f, 0x0002 }
};
int val;
rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
val = rtl_readphy(tp, 0x0d);
if ((val & 0x00ff) != 0x006c) {
static const u32 set[] = {
0x0065, 0x0066, 0x0067, 0x0068,
0x0069, 0x006a, 0x006b, 0x006c
};
int i;
rtl_writephy(tp, 0x1f, 0x0002);
val &= 0xff00;
for (i = 0; i < ARRAY_SIZE(set); i++)
rtl_writephy(tp, 0x0d, val | set[i]);
}
} else {
static const struct phy_reg phy_reg_init[] = {
{ 0x1f, 0x0002 },
{ 0x05, 0x6662 },
{ 0x1f, 0x0005 },
{ 0x05, 0x8330 },
{ 0x06, 0x6662 }
};
rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
}
/* RSET couple improve */
rtl_writephy(tp, 0x1f, 0x0002);
rtl_patchphy(tp, 0x0d, 0x0300);
rtl_patchphy(tp, 0x0f, 0x0010);
/* Fine tune PLL performance */
rtl_writephy(tp, 0x1f, 0x0002);
rtl_w1w0_phy(tp, 0x02, 0x0100, 0x0600);
rtl_w1w0_phy(tp, 0x03, 0x0000, 0xe000);
rtl_writephy(tp, 0x1f, 0x0005);
rtl_writephy(tp, 0x05, 0x001b);
rtl_apply_firmware_cond(tp, MII_EXPANSION, 0xbf00);
rtl_writephy(tp, 0x1f, 0x0000);
}
static void rtl8168d_2_hw_phy_config(struct rtl8169_private *tp)
{
static const struct phy_reg phy_reg_init_0[] = {
/* Channel Estimation */
{ 0x1f, 0x0001 },
{ 0x06, 0x4064 },
{ 0x07, 0x2863 },
{ 0x08, 0x059c },
{ 0x09, 0x26b4 },
{ 0x0a, 0x6a19 },
{ 0x0b, 0xdcc8 },
{ 0x10, 0xf06d },
{ 0x14, 0x7f68 },
{ 0x18, 0x7fd9 },
{ 0x1c, 0xf0ff },
{ 0x1d, 0x3d9c },
{ 0x1f, 0x0003 },
{ 0x12, 0xf49f },
{ 0x13, 0x070b },
{ 0x1a, 0x05ad },
{ 0x14, 0x94c0 },
/*
* Tx Error Issue
* Enhance line driver power
*/
{ 0x1f, 0x0002 },
{ 0x06, 0x5561 },
{ 0x1f, 0x0005 },
{ 0x05, 0x8332 },
{ 0x06, 0x5561 },
/*
* Can not link to 1Gbps with bad cable
* Decrease SNR threshold form 21.07dB to 19.04dB
*/
{ 0x1f, 0x0001 },
{ 0x17, 0x0cc0 },
{ 0x1f, 0x0000 },
{ 0x0d, 0xf880 }
};
void __iomem *ioaddr = tp->mmio_addr;
rtl_writephy_batch(tp, phy_reg_init_0, ARRAY_SIZE(phy_reg_init_0));
if (rtl8168d_efuse_read(ioaddr, 0x01) == 0xb1) {
static const struct phy_reg phy_reg_init[] = {
{ 0x1f, 0x0002 },
{ 0x05, 0x669a },
{ 0x1f, 0x0005 },
{ 0x05, 0x8330 },
{ 0x06, 0x669a },
{ 0x1f, 0x0002 }
};
int val;
rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
val = rtl_readphy(tp, 0x0d);
if ((val & 0x00ff) != 0x006c) {
static const u32 set[] = {
0x0065, 0x0066, 0x0067, 0x0068,
0x0069, 0x006a, 0x006b, 0x006c
};
int i;
rtl_writephy(tp, 0x1f, 0x0002);
val &= 0xff00;
for (i = 0; i < ARRAY_SIZE(set); i++)
rtl_writephy(tp, 0x0d, val | set[i]);
}
} else {
static const struct phy_reg phy_reg_init[] = {
{ 0x1f, 0x0002 },
{ 0x05, 0x2642 },
{ 0x1f, 0x0005 },
{ 0x05, 0x8330 },
{ 0x06, 0x2642 }
};
rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
}
/* Fine tune PLL performance */
rtl_writephy(tp, 0x1f, 0x0002);
rtl_w1w0_phy(tp, 0x02, 0x0100, 0x0600);
rtl_w1w0_phy(tp, 0x03, 0x0000, 0xe000);
/* Switching regulator Slew rate */
rtl_writephy(tp, 0x1f, 0x0002);
rtl_patchphy(tp, 0x0f, 0x0017);
rtl_writephy(tp, 0x1f, 0x0005);
rtl_writephy(tp, 0x05, 0x001b);
rtl_apply_firmware_cond(tp, MII_EXPANSION, 0xb300);
rtl_writephy(tp, 0x1f, 0x0000);
}
static void rtl8168d_3_hw_phy_config(struct rtl8169_private *tp)
{
static const struct phy_reg phy_reg_init[] = {
{ 0x1f, 0x0002 },
{ 0x10, 0x0008 },
{ 0x0d, 0x006c },
{ 0x1f, 0x0000 },
{ 0x0d, 0xf880 },
{ 0x1f, 0x0001 },
{ 0x17, 0x0cc0 },
{ 0x1f, 0x0001 },
{ 0x0b, 0xa4d8 },
{ 0x09, 0x281c },
{ 0x07, 0x2883 },
{ 0x0a, 0x6b35 },
{ 0x1d, 0x3da4 },
{ 0x1c, 0xeffd },
{ 0x14, 0x7f52 },
{ 0x18, 0x7fc6 },
{ 0x08, 0x0601 },
{ 0x06, 0x4063 },
{ 0x10, 0xf074 },
{ 0x1f, 0x0003 },
{ 0x13, 0x0789 },
{ 0x12, 0xf4bd },
{ 0x1a, 0x04fd },
{ 0x14, 0x84b0 },
{ 0x1f, 0x0000 },
{ 0x00, 0x9200 },
{ 0x1f, 0x0005 },
{ 0x01, 0x0340 },
{ 0x1f, 0x0001 },
{ 0x04, 0x4000 },
{ 0x03, 0x1d21 },
{ 0x02, 0x0c32 },
{ 0x01, 0x0200 },
{ 0x00, 0x5554 },
{ 0x04, 0x4800 },
{ 0x04, 0x4000 },
{ 0x04, 0xf000 },
{ 0x03, 0xdf01 },
{ 0x02, 0xdf20 },
{ 0x01, 0x101a },
{ 0x00, 0xa0ff },
{ 0x04, 0xf800 },
{ 0x04, 0xf000 },
{ 0x1f, 0x0000 },
{ 0x1f, 0x0007 },
{ 0x1e, 0x0023 },
{ 0x16, 0x0000 },
{ 0x1f, 0x0000 }
};
rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
}
static void rtl8168d_4_hw_phy_config(struct rtl8169_private *tp)
{
static const struct phy_reg phy_reg_init[] = {
{ 0x1f, 0x0001 },
{ 0x17, 0x0cc0 },
{ 0x1f, 0x0007 },
{ 0x1e, 0x002d },
{ 0x18, 0x0040 },
{ 0x1f, 0x0000 }
};
rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
rtl_patchphy(tp, 0x0d, 1 << 5);
}
static void rtl8168e_1_hw_phy_config(struct rtl8169_private *tp)
{
static const struct phy_reg phy_reg_init[] = {
/* Enable Delay cap */
{ 0x1f, 0x0005 },
{ 0x05, 0x8b80 },
{ 0x06, 0xc896 },
{ 0x1f, 0x0000 },
/* Channel estimation fine tune */
{ 0x1f, 0x0001 },
{ 0x0b, 0x6c20 },
{ 0x07, 0x2872 },
{ 0x1c, 0xefff },
{ 0x1f, 0x0003 },
{ 0x14, 0x6420 },
{ 0x1f, 0x0000 },
/* Update PFM & 10M TX idle timer */
{ 0x1f, 0x0007 },
{ 0x1e, 0x002f },
{ 0x15, 0x1919 },
{ 0x1f, 0x0000 },
{ 0x1f, 0x0007 },
{ 0x1e, 0x00ac },
{ 0x18, 0x0006 },
{ 0x1f, 0x0000 }
};
rtl_apply_firmware(tp);
rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
/* DCO enable for 10M IDLE Power */
rtl_writephy(tp, 0x1f, 0x0007);
rtl_writephy(tp, 0x1e, 0x0023);
rtl_w1w0_phy(tp, 0x17, 0x0006, 0x0000);
rtl_writephy(tp, 0x1f, 0x0000);
/* For impedance matching */
rtl_writephy(tp, 0x1f, 0x0002);
rtl_w1w0_phy(tp, 0x08, 0x8000, 0x7f00);
rtl_writephy(tp, 0x1f, 0x0000);
/* PHY auto speed down */
rtl_writephy(tp, 0x1f, 0x0007);
rtl_writephy(tp, 0x1e, 0x002d);
rtl_w1w0_phy(tp, 0x18, 0x0050, 0x0000);
rtl_writephy(tp, 0x1f, 0x0000);
rtl_w1w0_phy(tp, 0x14, 0x8000, 0x0000);
rtl_writephy(tp, 0x1f, 0x0005);
rtl_writephy(tp, 0x05, 0x8b86);
rtl_w1w0_phy(tp, 0x06, 0x0001, 0x0000);
rtl_writephy(tp, 0x1f, 0x0000);
rtl_writephy(tp, 0x1f, 0x0005);
rtl_writephy(tp, 0x05, 0x8b85);
rtl_w1w0_phy(tp, 0x06, 0x0000, 0x2000);
rtl_writephy(tp, 0x1f, 0x0007);
rtl_writephy(tp, 0x1e, 0x0020);
rtl_w1w0_phy(tp, 0x15, 0x0000, 0x1100);
rtl_writephy(tp, 0x1f, 0x0006);
rtl_writephy(tp, 0x00, 0x5a00);
rtl_writephy(tp, 0x1f, 0x0000);
rtl_writephy(tp, 0x0d, 0x0007);
rtl_writephy(tp, 0x0e, 0x003c);
rtl_writephy(tp, 0x0d, 0x4007);
rtl_writephy(tp, 0x0e, 0x0000);
rtl_writephy(tp, 0x0d, 0x0000);
}
static void rtl8168e_2_hw_phy_config(struct rtl8169_private *tp)
{
static const struct phy_reg phy_reg_init[] = {
/* Enable Delay cap */
{ 0x1f, 0x0004 },
{ 0x1f, 0x0007 },
{ 0x1e, 0x00ac },
{ 0x18, 0x0006 },
{ 0x1f, 0x0002 },
{ 0x1f, 0x0000 },
{ 0x1f, 0x0000 },
/* Channel estimation fine tune */
{ 0x1f, 0x0003 },
{ 0x09, 0xa20f },
{ 0x1f, 0x0000 },
{ 0x1f, 0x0000 },
/* Green Setting */
{ 0x1f, 0x0005 },
{ 0x05, 0x8b5b },
{ 0x06, 0x9222 },
{ 0x05, 0x8b6d },
{ 0x06, 0x8000 },
{ 0x05, 0x8b76 },
{ 0x06, 0x8000 },
{ 0x1f, 0x0000 }
};
rtl_apply_firmware(tp);
rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
/* For 4-corner performance improve */
rtl_writephy(tp, 0x1f, 0x0005);
rtl_writephy(tp, 0x05, 0x8b80);
rtl_w1w0_phy(tp, 0x17, 0x0006, 0x0000);
rtl_writephy(tp, 0x1f, 0x0000);
/* PHY auto speed down */
rtl_writephy(tp, 0x1f, 0x0004);
rtl_writephy(tp, 0x1f, 0x0007);
rtl_writephy(tp, 0x1e, 0x002d);
rtl_w1w0_phy(tp, 0x18, 0x0010, 0x0000);
rtl_writephy(tp, 0x1f, 0x0002);
rtl_writephy(tp, 0x1f, 0x0000);
rtl_w1w0_phy(tp, 0x14, 0x8000, 0x0000);
/* improve 10M EEE waveform */
rtl_writephy(tp, 0x1f, 0x0005);
rtl_writephy(tp, 0x05, 0x8b86);
rtl_w1w0_phy(tp, 0x06, 0x0001, 0x0000);
rtl_writephy(tp, 0x1f, 0x0000);
/* Improve 2-pair detection performance */
rtl_writephy(tp, 0x1f, 0x0005);
rtl_writephy(tp, 0x05, 0x8b85);
rtl_w1w0_phy(tp, 0x06, 0x4000, 0x0000);
rtl_writephy(tp, 0x1f, 0x0000);
/* EEE setting */
rtl_w1w0_eri(tp->mmio_addr, 0x1b0, ERIAR_MASK_1111, 0x0000, 0x0003,
ERIAR_EXGMAC);
rtl_writephy(tp, 0x1f, 0x0005);
rtl_writephy(tp, 0x05, 0x8b85);
rtl_w1w0_phy(tp, 0x06, 0x0000, 0x2000);
rtl_writephy(tp, 0x1f, 0x0004);
rtl_writephy(tp, 0x1f, 0x0007);
rtl_writephy(tp, 0x1e, 0x0020);
rtl_w1w0_phy(tp, 0x06, 0x0000, 0x0100);
rtl_writephy(tp, 0x1f, 0x0002);
rtl_writephy(tp, 0x1f, 0x0000);
rtl_writephy(tp, 0x0d, 0x0007);
rtl_writephy(tp, 0x0e, 0x003c);
rtl_writephy(tp, 0x0d, 0x4007);
rtl_writephy(tp, 0x0e, 0x0000);
rtl_writephy(tp, 0x0d, 0x0000);
/* Green feature */
rtl_writephy(tp, 0x1f, 0x0003);
rtl_w1w0_phy(tp, 0x19, 0x0000, 0x0001);
rtl_w1w0_phy(tp, 0x10, 0x0000, 0x0400);
rtl_writephy(tp, 0x1f, 0x0000);
}
static void rtl8102e_hw_phy_config(struct rtl8169_private *tp)
{
static const struct phy_reg phy_reg_init[] = {
{ 0x1f, 0x0003 },
{ 0x08, 0x441d },
{ 0x01, 0x9100 },
{ 0x1f, 0x0000 }
};
rtl_writephy(tp, 0x1f, 0x0000);
rtl_patchphy(tp, 0x11, 1 << 12);
rtl_patchphy(tp, 0x19, 1 << 13);
rtl_patchphy(tp, 0x10, 1 << 15);
rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
}
static void rtl8105e_hw_phy_config(struct rtl8169_private *tp)
{
static const struct phy_reg phy_reg_init[] = {
{ 0x1f, 0x0005 },
{ 0x1a, 0x0000 },
{ 0x1f, 0x0000 },
{ 0x1f, 0x0004 },
{ 0x1c, 0x0000 },
{ 0x1f, 0x0000 },
{ 0x1f, 0x0001 },
{ 0x15, 0x7701 },
{ 0x1f, 0x0000 }
};
/* Disable ALDPS before ram code */
rtl_writephy(tp, 0x1f, 0x0000);
rtl_writephy(tp, 0x18, 0x0310);
msleep(100);
rtl_apply_firmware(tp);
rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
}
static void rtl_hw_phy_config(struct net_device *dev)
{
struct rtl8169_private *tp = netdev_priv(dev);
rtl8169_print_mac_version(tp);
switch (tp->mac_version) {
case RTL_GIGA_MAC_VER_01:
break;
case RTL_GIGA_MAC_VER_02:
case RTL_GIGA_MAC_VER_03:
rtl8169s_hw_phy_config(tp);
break;
case RTL_GIGA_MAC_VER_04:
rtl8169sb_hw_phy_config(tp);
break;
case RTL_GIGA_MAC_VER_05:
rtl8169scd_hw_phy_config(tp);
break;
case RTL_GIGA_MAC_VER_06:
rtl8169sce_hw_phy_config(tp);
break;
case RTL_GIGA_MAC_VER_07:
case RTL_GIGA_MAC_VER_08:
case RTL_GIGA_MAC_VER_09:
rtl8102e_hw_phy_config(tp);
break;
case RTL_GIGA_MAC_VER_11:
rtl8168bb_hw_phy_config(tp);
break;
case RTL_GIGA_MAC_VER_12:
rtl8168bef_hw_phy_config(tp);
break;
case RTL_GIGA_MAC_VER_17:
rtl8168bef_hw_phy_config(tp);
break;
case RTL_GIGA_MAC_VER_18:
rtl8168cp_1_hw_phy_config(tp);
break;
case RTL_GIGA_MAC_VER_19:
rtl8168c_1_hw_phy_config(tp);
break;
case RTL_GIGA_MAC_VER_20:
rtl8168c_2_hw_phy_config(tp);
break;
case RTL_GIGA_MAC_VER_21:
rtl8168c_3_hw_phy_config(tp);
break;
case RTL_GIGA_MAC_VER_22:
rtl8168c_4_hw_phy_config(tp);
break;
case RTL_GIGA_MAC_VER_23:
case RTL_GIGA_MAC_VER_24:
rtl8168cp_2_hw_phy_config(tp);
break;
case RTL_GIGA_MAC_VER_25:
rtl8168d_1_hw_phy_config(tp);
break;
case RTL_GIGA_MAC_VER_26:
rtl8168d_2_hw_phy_config(tp);
break;
case RTL_GIGA_MAC_VER_27:
rtl8168d_3_hw_phy_config(tp);
break;
case RTL_GIGA_MAC_VER_28:
rtl8168d_4_hw_phy_config(tp);
break;
case RTL_GIGA_MAC_VER_29:
case RTL_GIGA_MAC_VER_30:
rtl8105e_hw_phy_config(tp);
break;
case RTL_GIGA_MAC_VER_31:
/* None. */
break;
case RTL_GIGA_MAC_VER_32:
case RTL_GIGA_MAC_VER_33:
rtl8168e_1_hw_phy_config(tp);
break;
case RTL_GIGA_MAC_VER_34:
rtl8168e_2_hw_phy_config(tp);
break;
default:
break;
}
}
static void rtl8169_phy_timer(unsigned long __opaque)
{
struct net_device *dev = (struct net_device *)__opaque;
struct rtl8169_private *tp = netdev_priv(dev);
struct timer_list *timer = &tp->timer;
void __iomem *ioaddr = tp->mmio_addr;
unsigned long timeout = RTL8169_PHY_TIMEOUT;
r8169: sync with vendor's driver - add several PCI ID for the PCI-E adapters ; - new identification strings ; - the RTL_GIGA_MAC_VER_ defines have been renamed to closely match the out-of-tree driver. It makes the comparison less hairy ; - various magic ; - the PCI region for the device with PCI ID 0x8136 is guessed. Explanation: the in-kernel Linux driver is written to allow MM register accesses and avoid the IO tax. The relevant BAR register was found at base address 1 for the plain-old PCI 8169. User reported lspci show that it is found at base address 2 for the new Gigabit PCI-E 816{8/9}. Typically: 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.: Unknown device 8168 (rev 01) Subsystem: Unknown device 1631:e015 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 20 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at b800 [size=256] Region 2: Memory at ff7ff000 (64-bit, non-prefetchable) [size=4K] ^^^^^^^^ So far I have not received any lspci report for the 0x8136 and Realtek's driver do not help: be it under BSD or Linux, their r1000 driver include a USE_IO_SPACE #define but the bar address is always hardcoded to 1 in the MM case. :o/ - the 8168 has been reported to require an extra alignment for its receive buffers. The status of the 8167 and 8136 is not known in this regard. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-07-27 04:14:13 +07:00
assert(tp->mac_version > RTL_GIGA_MAC_VER_01);
spin_lock_irq(&tp->lock);
if (tp->phy_reset_pending(tp)) {
/*
* A busy loop could burn quite a few cycles on nowadays CPU.
* Let's delay the execution of the timer for a few ticks.
*/
timeout = HZ/10;
goto out_mod_timer;
}
if (tp->link_ok(ioaddr))
goto out_unlock;
netif_warn(tp, link, dev, "PHY reset until link up\n");
tp->phy_reset_enable(tp);
out_mod_timer:
mod_timer(timer, jiffies + timeout);
out_unlock:
spin_unlock_irq(&tp->lock);
}
#ifdef CONFIG_NET_POLL_CONTROLLER
/*
* Polling 'interrupt' - used by things like netconsole to send skbs
* without having to re-enable interrupts. It's not called while
* the interrupt routine is executing.
*/
static void rtl8169_netpoll(struct net_device *dev)
{
struct rtl8169_private *tp = netdev_priv(dev);
struct pci_dev *pdev = tp->pci_dev;
disable_irq(pdev->irq);
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 20:55:46 +07:00
rtl8169_interrupt(pdev->irq, dev);
enable_irq(pdev->irq);
}
#endif
static void rtl8169_release_board(struct pci_dev *pdev, struct net_device *dev,
void __iomem *ioaddr)
{
iounmap(ioaddr);
pci_release_regions(pdev);
pci_clear_mwi(pdev);
pci_disable_device(pdev);
free_netdev(dev);
}
static void rtl8169_phy_reset(struct net_device *dev,
struct rtl8169_private *tp)
{
unsigned int i;
tp->phy_reset_enable(tp);
for (i = 0; i < 100; i++) {
if (!tp->phy_reset_pending(tp))
return;
msleep(1);
}
netif_err(tp, link, dev, "PHY reset failed\n");
}
static void rtl8169_init_phy(struct net_device *dev, struct rtl8169_private *tp)
{
void __iomem *ioaddr = tp->mmio_addr;
rtl_hw_phy_config(dev);
if (tp->mac_version <= RTL_GIGA_MAC_VER_06) {
dprintk("Set MAC Reg C+CR Offset 0x82h = 0x01h\n");
RTL_W8(0x82, 0x01);
}
pci_write_config_byte(tp->pci_dev, PCI_LATENCY_TIMER, 0x40);
if (tp->mac_version <= RTL_GIGA_MAC_VER_06)
pci_write_config_byte(tp->pci_dev, PCI_CACHE_LINE_SIZE, 0x08);
r8169: sync with vendor's driver - add several PCI ID for the PCI-E adapters ; - new identification strings ; - the RTL_GIGA_MAC_VER_ defines have been renamed to closely match the out-of-tree driver. It makes the comparison less hairy ; - various magic ; - the PCI region for the device with PCI ID 0x8136 is guessed. Explanation: the in-kernel Linux driver is written to allow MM register accesses and avoid the IO tax. The relevant BAR register was found at base address 1 for the plain-old PCI 8169. User reported lspci show that it is found at base address 2 for the new Gigabit PCI-E 816{8/9}. Typically: 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.: Unknown device 8168 (rev 01) Subsystem: Unknown device 1631:e015 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 20 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at b800 [size=256] Region 2: Memory at ff7ff000 (64-bit, non-prefetchable) [size=4K] ^^^^^^^^ So far I have not received any lspci report for the 0x8136 and Realtek's driver do not help: be it under BSD or Linux, their r1000 driver include a USE_IO_SPACE #define but the bar address is always hardcoded to 1 in the MM case. :o/ - the 8168 has been reported to require an extra alignment for its receive buffers. The status of the 8167 and 8136 is not known in this regard. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-07-27 04:14:13 +07:00
if (tp->mac_version == RTL_GIGA_MAC_VER_02) {
dprintk("Set MAC Reg C+CR Offset 0x82h = 0x01h\n");
RTL_W8(0x82, 0x01);
dprintk("Set PHY Reg 0x0bh = 0x00h\n");
rtl_writephy(tp, 0x0b, 0x0000); //w 0x0b 15 0 0
}
rtl8169_phy_reset(dev, tp);
rtl8169_set_speed(dev, AUTONEG_ENABLE, SPEED_1000, DUPLEX_FULL,
ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full |
(tp->mii.supports_gmii ?
ADVERTISED_1000baseT_Half |
ADVERTISED_1000baseT_Full : 0));
if (RTL_R8(PHYstatus) & TBI_Enable)
netif_info(tp, link, dev, "TBI auto-negotiating\n");
}
static void rtl_rar_set(struct rtl8169_private *tp, u8 *addr)
{
void __iomem *ioaddr = tp->mmio_addr;
u32 high;
u32 low;
low = addr[0] | (addr[1] << 8) | (addr[2] << 16) | (addr[3] << 24);
high = addr[4] | (addr[5] << 8);
spin_lock_irq(&tp->lock);
RTL_W8(Cfg9346, Cfg9346_Unlock);
RTL_W32(MAC4, high);
RTL_R32(MAC4);
RTL_W32(MAC0, low);
RTL_R32(MAC0);
RTL_W8(Cfg9346, Cfg9346_Lock);
spin_unlock_irq(&tp->lock);
}
static int rtl_set_mac_address(struct net_device *dev, void *p)
{
struct rtl8169_private *tp = netdev_priv(dev);
struct sockaddr *addr = p;
if (!is_valid_ether_addr(addr->sa_data))
return -EADDRNOTAVAIL;
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
rtl_rar_set(tp, dev->dev_addr);
return 0;
}
static int rtl8169_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
struct rtl8169_private *tp = netdev_priv(dev);
struct mii_ioctl_data *data = if_mii(ifr);
return netif_running(dev) ? tp->do_ioctl(tp, data, cmd) : -ENODEV;
}
static int rtl_xmii_ioctl(struct rtl8169_private *tp,
struct mii_ioctl_data *data, int cmd)
{
switch (cmd) {
case SIOCGMIIPHY:
data->phy_id = 32; /* Internal PHY */
return 0;
case SIOCGMIIREG:
data->val_out = rtl_readphy(tp, data->reg_num & 0x1f);
return 0;
case SIOCSMIIREG:
rtl_writephy(tp, data->reg_num & 0x1f, data->val_in);
return 0;
}
return -EOPNOTSUPP;
}
static int rtl_tbi_ioctl(struct rtl8169_private *tp, struct mii_ioctl_data *data, int cmd)
{
return -EOPNOTSUPP;
}
static const struct rtl_cfg_info {
void (*hw_start)(struct net_device *);
unsigned int region;
unsigned int align;
u16 intr_event;
u16 napi_event;
unsigned features;
u8 default_ver;
} rtl_cfg_infos [] = {
[RTL_CFG_0] = {
.hw_start = rtl_hw_start_8169,
.region = 1,
.align = 0,
.intr_event = SYSErr | LinkChg | RxOverflow |
RxFIFOOver | TxErr | TxOK | RxOK | RxErr,
.napi_event = RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow,
.features = RTL_FEATURE_GMII,
.default_ver = RTL_GIGA_MAC_VER_01,
},
[RTL_CFG_1] = {
.hw_start = rtl_hw_start_8168,
.region = 2,
.align = 8,
.intr_event = SYSErr | LinkChg | RxOverflow |
TxErr | TxOK | RxOK | RxErr,
.napi_event = TxErr | TxOK | RxOK | RxOverflow,
.features = RTL_FEATURE_GMII | RTL_FEATURE_MSI,
.default_ver = RTL_GIGA_MAC_VER_11,
},
[RTL_CFG_2] = {
.hw_start = rtl_hw_start_8101,
.region = 2,
.align = 8,
.intr_event = SYSErr | LinkChg | RxOverflow | PCSTimeout |
RxFIFOOver | TxErr | TxOK | RxOK | RxErr,
.napi_event = RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow,
.features = RTL_FEATURE_MSI,
.default_ver = RTL_GIGA_MAC_VER_13,
}
};
/* Cfg9346_Unlock assumed. */
static unsigned rtl_try_msi(struct pci_dev *pdev, void __iomem *ioaddr,
const struct rtl_cfg_info *cfg)
{
unsigned msi = 0;
u8 cfg2;
cfg2 = RTL_R8(Config2) & ~MSIEnable;
if (cfg->features & RTL_FEATURE_MSI) {
if (pci_enable_msi(pdev)) {
dev_info(&pdev->dev, "no MSI. Back to INTx.\n");
} else {
cfg2 |= MSIEnable;
msi = RTL_FEATURE_MSI;
}
}
RTL_W8(Config2, cfg2);
return msi;
}
static void rtl_disable_msi(struct pci_dev *pdev, struct rtl8169_private *tp)
{
if (tp->features & RTL_FEATURE_MSI) {
pci_disable_msi(pdev);
tp->features &= ~RTL_FEATURE_MSI;
}
}
static const struct net_device_ops rtl8169_netdev_ops = {
.ndo_open = rtl8169_open,
.ndo_stop = rtl8169_close,
.ndo_get_stats = rtl8169_get_stats,
.ndo_start_xmit = rtl8169_start_xmit,
.ndo_tx_timeout = rtl8169_tx_timeout,
.ndo_validate_addr = eth_validate_addr,
.ndo_change_mtu = rtl8169_change_mtu,
.ndo_fix_features = rtl8169_fix_features,
.ndo_set_features = rtl8169_set_features,
.ndo_set_mac_address = rtl_set_mac_address,
.ndo_do_ioctl = rtl8169_ioctl,
.ndo_set_multicast_list = rtl_set_rx_mode,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = rtl8169_netpoll,
#endif
};
static void __devinit rtl_init_mdio_ops(struct rtl8169_private *tp)
{
struct mdio_ops *ops = &tp->mdio_ops;
switch (tp->mac_version) {
case RTL_GIGA_MAC_VER_27:
ops->write = r8168dp_1_mdio_write;
ops->read = r8168dp_1_mdio_read;
break;
case RTL_GIGA_MAC_VER_28:
case RTL_GIGA_MAC_VER_31:
ops->write = r8168dp_2_mdio_write;
ops->read = r8168dp_2_mdio_read;
break;
default:
ops->write = r8169_mdio_write;
ops->read = r8169_mdio_read;
break;
}
}
static void r810x_phy_power_down(struct rtl8169_private *tp)
{
rtl_writephy(tp, 0x1f, 0x0000);
rtl_writephy(tp, MII_BMCR, BMCR_PDOWN);
}
static void r810x_phy_power_up(struct rtl8169_private *tp)
{
rtl_writephy(tp, 0x1f, 0x0000);
rtl_writephy(tp, MII_BMCR, BMCR_ANENABLE);
}
static void r810x_pll_power_down(struct rtl8169_private *tp)
{
if (__rtl8169_get_wol(tp) & WAKE_ANY) {
rtl_writephy(tp, 0x1f, 0x0000);
rtl_writephy(tp, MII_BMCR, 0x0000);
return;
}
r810x_phy_power_down(tp);
}
static void r810x_pll_power_up(struct rtl8169_private *tp)
{
r810x_phy_power_up(tp);
}
static void r8168_phy_power_up(struct rtl8169_private *tp)
{
rtl_writephy(tp, 0x1f, 0x0000);
switch (tp->mac_version) {
case RTL_GIGA_MAC_VER_11:
case RTL_GIGA_MAC_VER_12:
case RTL_GIGA_MAC_VER_17:
case RTL_GIGA_MAC_VER_18:
case RTL_GIGA_MAC_VER_19:
case RTL_GIGA_MAC_VER_20:
case RTL_GIGA_MAC_VER_21:
case RTL_GIGA_MAC_VER_22:
case RTL_GIGA_MAC_VER_23:
case RTL_GIGA_MAC_VER_24:
case RTL_GIGA_MAC_VER_25:
case RTL_GIGA_MAC_VER_26:
case RTL_GIGA_MAC_VER_27:
case RTL_GIGA_MAC_VER_28:
case RTL_GIGA_MAC_VER_31:
rtl_writephy(tp, 0x0e, 0x0000);
break;
default:
break;
}
rtl_writephy(tp, MII_BMCR, BMCR_ANENABLE);
}
static void r8168_phy_power_down(struct rtl8169_private *tp)
{
rtl_writephy(tp, 0x1f, 0x0000);
switch (tp->mac_version) {
case RTL_GIGA_MAC_VER_32:
case RTL_GIGA_MAC_VER_33:
rtl_writephy(tp, MII_BMCR, BMCR_ANENABLE | BMCR_PDOWN);
break;
case RTL_GIGA_MAC_VER_11:
case RTL_GIGA_MAC_VER_12:
case RTL_GIGA_MAC_VER_17:
case RTL_GIGA_MAC_VER_18:
case RTL_GIGA_MAC_VER_19:
case RTL_GIGA_MAC_VER_20:
case RTL_GIGA_MAC_VER_21:
case RTL_GIGA_MAC_VER_22:
case RTL_GIGA_MAC_VER_23:
case RTL_GIGA_MAC_VER_24:
case RTL_GIGA_MAC_VER_25:
case RTL_GIGA_MAC_VER_26:
case RTL_GIGA_MAC_VER_27:
case RTL_GIGA_MAC_VER_28:
case RTL_GIGA_MAC_VER_31:
rtl_writephy(tp, 0x0e, 0x0200);
default:
rtl_writephy(tp, MII_BMCR, BMCR_PDOWN);
break;
}
}
static void r8168_pll_power_down(struct rtl8169_private *tp)
{
void __iomem *ioaddr = tp->mmio_addr;
if ((tp->mac_version == RTL_GIGA_MAC_VER_27 ||
tp->mac_version == RTL_GIGA_MAC_VER_28 ||
tp->mac_version == RTL_GIGA_MAC_VER_31) &&
r8168dp_check_dash(tp)) {
return;
}
if ((tp->mac_version == RTL_GIGA_MAC_VER_23 ||
tp->mac_version == RTL_GIGA_MAC_VER_24) &&
(RTL_R16(CPlusCmd) & ASF)) {
return;
}
if (tp->mac_version == RTL_GIGA_MAC_VER_32 ||
tp->mac_version == RTL_GIGA_MAC_VER_33)
rtl_ephy_write(ioaddr, 0x19, 0xff64);
if (__rtl8169_get_wol(tp) & WAKE_ANY) {
rtl_writephy(tp, 0x1f, 0x0000);
rtl_writephy(tp, MII_BMCR, 0x0000);
if (tp->mac_version == RTL_GIGA_MAC_VER_32 ||
tp->mac_version == RTL_GIGA_MAC_VER_33)
RTL_W32(RxConfig, RTL_R32(RxConfig) | AcceptBroadcast |
AcceptMulticast | AcceptMyPhys);
return;
}
r8168_phy_power_down(tp);
switch (tp->mac_version) {
case RTL_GIGA_MAC_VER_25:
case RTL_GIGA_MAC_VER_26:
case RTL_GIGA_MAC_VER_27:
case RTL_GIGA_MAC_VER_28:
case RTL_GIGA_MAC_VER_31:
case RTL_GIGA_MAC_VER_32:
case RTL_GIGA_MAC_VER_33:
RTL_W8(PMCH, RTL_R8(PMCH) & ~0x80);
break;
}
}
static void r8168_pll_power_up(struct rtl8169_private *tp)
{
void __iomem *ioaddr = tp->mmio_addr;
if ((tp->mac_version == RTL_GIGA_MAC_VER_27 ||
tp->mac_version == RTL_GIGA_MAC_VER_28 ||
tp->mac_version == RTL_GIGA_MAC_VER_31) &&
r8168dp_check_dash(tp)) {
return;
}
switch (tp->mac_version) {
case RTL_GIGA_MAC_VER_25:
case RTL_GIGA_MAC_VER_26:
case RTL_GIGA_MAC_VER_27:
case RTL_GIGA_MAC_VER_28:
case RTL_GIGA_MAC_VER_31:
case RTL_GIGA_MAC_VER_32:
case RTL_GIGA_MAC_VER_33:
RTL_W8(PMCH, RTL_R8(PMCH) | 0x80);
break;
}
r8168_phy_power_up(tp);
}
static void rtl_pll_power_op(struct rtl8169_private *tp,
void (*op)(struct rtl8169_private *))
{
if (op)
op(tp);
}
static void rtl_pll_power_down(struct rtl8169_private *tp)
{
rtl_pll_power_op(tp, tp->pll_power_ops.down);
}
static void rtl_pll_power_up(struct rtl8169_private *tp)
{
rtl_pll_power_op(tp, tp->pll_power_ops.up);
}
static void __devinit rtl_init_pll_power_ops(struct rtl8169_private *tp)
{
struct pll_power_ops *ops = &tp->pll_power_ops;
switch (tp->mac_version) {
case RTL_GIGA_MAC_VER_07:
case RTL_GIGA_MAC_VER_08:
case RTL_GIGA_MAC_VER_09:
case RTL_GIGA_MAC_VER_10:
case RTL_GIGA_MAC_VER_16:
case RTL_GIGA_MAC_VER_29:
case RTL_GIGA_MAC_VER_30:
ops->down = r810x_pll_power_down;
ops->up = r810x_pll_power_up;
break;
case RTL_GIGA_MAC_VER_11:
case RTL_GIGA_MAC_VER_12:
case RTL_GIGA_MAC_VER_17:
case RTL_GIGA_MAC_VER_18:
case RTL_GIGA_MAC_VER_19:
case RTL_GIGA_MAC_VER_20:
case RTL_GIGA_MAC_VER_21:
case RTL_GIGA_MAC_VER_22:
case RTL_GIGA_MAC_VER_23:
case RTL_GIGA_MAC_VER_24:
case RTL_GIGA_MAC_VER_25:
case RTL_GIGA_MAC_VER_26:
case RTL_GIGA_MAC_VER_27:
case RTL_GIGA_MAC_VER_28:
case RTL_GIGA_MAC_VER_31:
case RTL_GIGA_MAC_VER_32:
case RTL_GIGA_MAC_VER_33:
case RTL_GIGA_MAC_VER_34:
ops->down = r8168_pll_power_down;
ops->up = r8168_pll_power_up;
break;
default:
ops->down = NULL;
ops->up = NULL;
break;
}
}
static void rtl_init_rxcfg(struct rtl8169_private *tp)
{
void __iomem *ioaddr = tp->mmio_addr;
switch (tp->mac_version) {
case RTL_GIGA_MAC_VER_01:
case RTL_GIGA_MAC_VER_02:
case RTL_GIGA_MAC_VER_03:
case RTL_GIGA_MAC_VER_04:
case RTL_GIGA_MAC_VER_05:
case RTL_GIGA_MAC_VER_06:
case RTL_GIGA_MAC_VER_10:
case RTL_GIGA_MAC_VER_11:
case RTL_GIGA_MAC_VER_12:
case RTL_GIGA_MAC_VER_13:
case RTL_GIGA_MAC_VER_14:
case RTL_GIGA_MAC_VER_15:
case RTL_GIGA_MAC_VER_16:
case RTL_GIGA_MAC_VER_17:
RTL_W32(RxConfig, RX_FIFO_THRESH | RX_DMA_BURST);
break;
case RTL_GIGA_MAC_VER_18:
case RTL_GIGA_MAC_VER_19:
case RTL_GIGA_MAC_VER_20:
case RTL_GIGA_MAC_VER_21:
case RTL_GIGA_MAC_VER_22:
case RTL_GIGA_MAC_VER_23:
case RTL_GIGA_MAC_VER_24:
RTL_W32(RxConfig, RX128_INT_EN | RX_MULTI_EN | RX_DMA_BURST);
break;
default:
RTL_W32(RxConfig, RX128_INT_EN | RX_DMA_BURST);
break;
}
}
static void rtl8169_init_ring_indexes(struct rtl8169_private *tp)
{
tp->dirty_tx = tp->dirty_rx = tp->cur_tx = tp->cur_rx = 0;
}
static void rtl_hw_reset(struct rtl8169_private *tp)
{
void __iomem *ioaddr = tp->mmio_addr;
int i;
/* Soft reset the chip. */
RTL_W8(ChipCmd, CmdReset);
/* Check that the chip has finished the reset. */
for (i = 0; i < 100; i++) {
if ((RTL_R8(ChipCmd) & CmdReset) == 0)
break;
udelay(100);
}
rtl8169_init_ring_indexes(tp);
}
static int __devinit
rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
const struct rtl_cfg_info *cfg = rtl_cfg_infos + ent->driver_data;
const unsigned int region = cfg->region;
struct rtl8169_private *tp;
struct mii_if_info *mii;
struct net_device *dev;
void __iomem *ioaddr;
int chipset, i;
int rc;
if (netif_msg_drv(&debug)) {
printk(KERN_INFO "%s Gigabit Ethernet driver %s loaded\n",
MODULENAME, RTL8169_VERSION);
}
dev = alloc_etherdev(sizeof (*tp));
if (!dev) {
if (netif_msg_drv(&debug))
dev_err(&pdev->dev, "unable to alloc new ethernet\n");
rc = -ENOMEM;
goto out;
}
SET_NETDEV_DEV(dev, &pdev->dev);
dev->netdev_ops = &rtl8169_netdev_ops;
tp = netdev_priv(dev);
tp->dev = dev;
tp->pci_dev = pdev;
tp->msg_enable = netif_msg_init(debug.msg_enable, R8169_MSG_DEFAULT);
mii = &tp->mii;
mii->dev = dev;
mii->mdio_read = rtl_mdio_read;
mii->mdio_write = rtl_mdio_write;
mii->phy_id_mask = 0x1f;
mii->reg_num_mask = 0x1f;
mii->supports_gmii = !!(cfg->features & RTL_FEATURE_GMII);
/* disable ASPM completely as that cause random device stop working
* problems as well as full system hangs for some PCIe devices users */
pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
PCIE_LINK_STATE_CLKPM);
/* enable device (incl. PCI PM wakeup and hotplug setup) */
rc = pci_enable_device(pdev);
if (rc < 0) {
netif_err(tp, probe, dev, "enable failure\n");
goto err_out_free_dev_1;
}
if (pci_set_mwi(pdev) < 0)
netif_info(tp, probe, dev, "Mem-Wr-Inval unavailable\n");
/* make sure PCI base addr 1 is MMIO */
r8169: sync with vendor's driver - add several PCI ID for the PCI-E adapters ; - new identification strings ; - the RTL_GIGA_MAC_VER_ defines have been renamed to closely match the out-of-tree driver. It makes the comparison less hairy ; - various magic ; - the PCI region for the device with PCI ID 0x8136 is guessed. Explanation: the in-kernel Linux driver is written to allow MM register accesses and avoid the IO tax. The relevant BAR register was found at base address 1 for the plain-old PCI 8169. User reported lspci show that it is found at base address 2 for the new Gigabit PCI-E 816{8/9}. Typically: 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.: Unknown device 8168 (rev 01) Subsystem: Unknown device 1631:e015 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 20 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at b800 [size=256] Region 2: Memory at ff7ff000 (64-bit, non-prefetchable) [size=4K] ^^^^^^^^ So far I have not received any lspci report for the 0x8136 and Realtek's driver do not help: be it under BSD or Linux, their r1000 driver include a USE_IO_SPACE #define but the bar address is always hardcoded to 1 in the MM case. :o/ - the 8168 has been reported to require an extra alignment for its receive buffers. The status of the 8167 and 8136 is not known in this regard. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-07-27 04:14:13 +07:00
if (!(pci_resource_flags(pdev, region) & IORESOURCE_MEM)) {
netif_err(tp, probe, dev,
"region #%d not an MMIO resource, aborting\n",
region);
rc = -ENODEV;
goto err_out_mwi_2;
}
/* check for weird/broken PCI region reporting */
r8169: sync with vendor's driver - add several PCI ID for the PCI-E adapters ; - new identification strings ; - the RTL_GIGA_MAC_VER_ defines have been renamed to closely match the out-of-tree driver. It makes the comparison less hairy ; - various magic ; - the PCI region for the device with PCI ID 0x8136 is guessed. Explanation: the in-kernel Linux driver is written to allow MM register accesses and avoid the IO tax. The relevant BAR register was found at base address 1 for the plain-old PCI 8169. User reported lspci show that it is found at base address 2 for the new Gigabit PCI-E 816{8/9}. Typically: 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.: Unknown device 8168 (rev 01) Subsystem: Unknown device 1631:e015 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 20 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at b800 [size=256] Region 2: Memory at ff7ff000 (64-bit, non-prefetchable) [size=4K] ^^^^^^^^ So far I have not received any lspci report for the 0x8136 and Realtek's driver do not help: be it under BSD or Linux, their r1000 driver include a USE_IO_SPACE #define but the bar address is always hardcoded to 1 in the MM case. :o/ - the 8168 has been reported to require an extra alignment for its receive buffers. The status of the 8167 and 8136 is not known in this regard. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-07-27 04:14:13 +07:00
if (pci_resource_len(pdev, region) < R8169_REGS_SIZE) {
netif_err(tp, probe, dev,
"Invalid PCI region size(s), aborting\n");
rc = -ENODEV;
goto err_out_mwi_2;
}
rc = pci_request_regions(pdev, MODULENAME);
if (rc < 0) {
netif_err(tp, probe, dev, "could not request regions\n");
goto err_out_mwi_2;
}
tp->cp_cmd = RxChkSum;
if ((sizeof(dma_addr_t) > 4) &&
!pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) && use_dac) {
tp->cp_cmd |= PCIDAC;
dev->features |= NETIF_F_HIGHDMA;
} else {
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc < 0) {
netif_err(tp, probe, dev, "DMA configuration failed\n");
goto err_out_free_res_3;
}
}
/* ioremap MMIO region */
r8169: sync with vendor's driver - add several PCI ID for the PCI-E adapters ; - new identification strings ; - the RTL_GIGA_MAC_VER_ defines have been renamed to closely match the out-of-tree driver. It makes the comparison less hairy ; - various magic ; - the PCI region for the device with PCI ID 0x8136 is guessed. Explanation: the in-kernel Linux driver is written to allow MM register accesses and avoid the IO tax. The relevant BAR register was found at base address 1 for the plain-old PCI 8169. User reported lspci show that it is found at base address 2 for the new Gigabit PCI-E 816{8/9}. Typically: 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.: Unknown device 8168 (rev 01) Subsystem: Unknown device 1631:e015 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 20 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at b800 [size=256] Region 2: Memory at ff7ff000 (64-bit, non-prefetchable) [size=4K] ^^^^^^^^ So far I have not received any lspci report for the 0x8136 and Realtek's driver do not help: be it under BSD or Linux, their r1000 driver include a USE_IO_SPACE #define but the bar address is always hardcoded to 1 in the MM case. :o/ - the 8168 has been reported to require an extra alignment for its receive buffers. The status of the 8167 and 8136 is not known in this regard. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-07-27 04:14:13 +07:00
ioaddr = ioremap(pci_resource_start(pdev, region), R8169_REGS_SIZE);
if (!ioaddr) {
netif_err(tp, probe, dev, "cannot remap MMIO, aborting\n");
rc = -EIO;
goto err_out_free_res_3;
}
tp->mmio_addr = ioaddr;
if (!pci_is_pcie(pdev))
netif_info(tp, probe, dev, "not PCI Express\n");
/* Identify chip attached to board */
rtl8169_get_mac_version(tp, dev, cfg->default_ver);
rtl_init_rxcfg(tp);
RTL_W16(IntrMask, 0x0000);
rtl_hw_reset(tp);
RTL_W16(IntrStatus, 0xffff);
pci_set_master(pdev);
/*
* Pretend we are using VLANs; This bypasses a nasty bug where
* Interrupts stop flowing on high load on 8110SCd controllers.
*/
if (tp->mac_version == RTL_GIGA_MAC_VER_05)
tp->cp_cmd |= RxVlan;
rtl_init_mdio_ops(tp);
rtl_init_pll_power_ops(tp);
rtl8169_print_mac_version(tp);
chipset = tp->mac_version;
tp->txd_version = rtl_chip_infos[chipset].txd_version;
RTL_W8(Cfg9346, Cfg9346_Unlock);
RTL_W8(Config1, RTL_R8(Config1) | PMEnable);
RTL_W8(Config5, RTL_R8(Config5) & PMEStatus);
if ((RTL_R8(Config3) & (LinkUp | MagicPacket)) != 0)
tp->features |= RTL_FEATURE_WOL;
if ((RTL_R8(Config5) & (UWF | BWF | MWF)) != 0)
tp->features |= RTL_FEATURE_WOL;
tp->features |= rtl_try_msi(pdev, ioaddr, cfg);
RTL_W8(Cfg9346, Cfg9346_Lock);
if ((tp->mac_version <= RTL_GIGA_MAC_VER_06) &&
(RTL_R8(PHYstatus) & TBI_Enable)) {
tp->set_speed = rtl8169_set_speed_tbi;
tp->get_settings = rtl8169_gset_tbi;
tp->phy_reset_enable = rtl8169_tbi_reset_enable;
tp->phy_reset_pending = rtl8169_tbi_reset_pending;
tp->link_ok = rtl8169_tbi_link_ok;
tp->do_ioctl = rtl_tbi_ioctl;
} else {
tp->set_speed = rtl8169_set_speed_xmii;
tp->get_settings = rtl8169_gset_xmii;
tp->phy_reset_enable = rtl8169_xmii_reset_enable;
tp->phy_reset_pending = rtl8169_xmii_reset_pending;
tp->link_ok = rtl8169_xmii_link_ok;
tp->do_ioctl = rtl_xmii_ioctl;
}
spin_lock_init(&tp->lock);
/* Get MAC address */
for (i = 0; i < MAC_ADDR_LEN; i++)
dev->dev_addr[i] = RTL_R8(MAC0 + i);
memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
SET_ETHTOOL_OPS(dev, &rtl8169_ethtool_ops);
dev->watchdog_timeo = RTL8169_TX_TIMEOUT;
dev->irq = pdev->irq;
dev->base_addr = (unsigned long) ioaddr;
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 06:41:36 +07:00
netif_napi_add(dev, &tp->napi, rtl8169_poll, R8169_NAPI_WEIGHT);
/* don't enable SG, IP_CSUM and TSO by default - it might not work
* properly for all devices */
dev->features |= NETIF_F_RXCSUM |
NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO |
NETIF_F_RXCSUM | NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO |
NETIF_F_HIGHDMA;
if (tp->mac_version == RTL_GIGA_MAC_VER_05)
/* 8110SCd requires hardware Rx VLAN - disallow toggling */
dev->hw_features &= ~NETIF_F_HW_VLAN_RX;
tp->intr_mask = 0xffff;
tp->hw_start = cfg->hw_start;
tp->intr_event = cfg->intr_event;
tp->napi_event = cfg->napi_event;
init_timer(&tp->timer);
tp->timer.data = (unsigned long) dev;
tp->timer.function = rtl8169_phy_timer;
tp->rtl_fw = RTL_FIRMWARE_UNKNOWN;
rc = register_netdev(dev);
if (rc < 0)
goto err_out_msi_4;
pci_set_drvdata(pdev, dev);
netif_info(tp, probe, dev, "%s at 0x%lx, %pM, XID %08x IRQ %d\n",
rtl_chip_infos[chipset].name, dev->base_addr, dev->dev_addr,
(u32)(RTL_R32(TxConfig) & 0x9cf0f8ff), dev->irq);
if (tp->mac_version == RTL_GIGA_MAC_VER_27 ||
tp->mac_version == RTL_GIGA_MAC_VER_28 ||
tp->mac_version == RTL_GIGA_MAC_VER_31) {
rtl8168_driver_start(tp);
}
device_set_wakeup_enable(&pdev->dev, tp->features & RTL_FEATURE_WOL);
if (pci_dev_run_wake(pdev))
pm_runtime_put_noidle(&pdev->dev);
netif_carrier_off(dev);
out:
return rc;
err_out_msi_4:
rtl_disable_msi(pdev, tp);
iounmap(ioaddr);
err_out_free_res_3:
pci_release_regions(pdev);
err_out_mwi_2:
pci_clear_mwi(pdev);
pci_disable_device(pdev);
err_out_free_dev_1:
free_netdev(dev);
goto out;
}
static void __devexit rtl8169_remove_one(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct rtl8169_private *tp = netdev_priv(dev);
if (tp->mac_version == RTL_GIGA_MAC_VER_27 ||
tp->mac_version == RTL_GIGA_MAC_VER_28 ||
tp->mac_version == RTL_GIGA_MAC_VER_31) {
rtl8168_driver_stop(tp);
}
cancel_delayed_work_sync(&tp->task);
unregister_netdev(dev);
rtl_release_firmware(tp);
if (pci_dev_run_wake(pdev))
pm_runtime_get_noresume(&pdev->dev);
/* restore original MAC address */
rtl_rar_set(tp, dev->perm_addr);
rtl_disable_msi(pdev, tp);
rtl8169_release_board(pdev, dev, tp->mmio_addr);
pci_set_drvdata(pdev, NULL);
}
static void rtl_request_uncached_firmware(struct rtl8169_private *tp)
{
struct rtl_fw *rtl_fw;
const char *name;
int rc = -ENOMEM;
name = rtl_lookup_firmware_name(tp);
if (!name)
goto out_no_firmware;
rtl_fw = kzalloc(sizeof(*rtl_fw), GFP_KERNEL);
if (!rtl_fw)
goto err_warn;
rc = request_firmware(&rtl_fw->fw, name, &tp->pci_dev->dev);
if (rc < 0)
goto err_free;
rc = rtl_check_firmware(tp, rtl_fw);
if (rc < 0)
goto err_release_firmware;
tp->rtl_fw = rtl_fw;
out:
return;
err_release_firmware:
release_firmware(rtl_fw->fw);
err_free:
kfree(rtl_fw);
err_warn:
netif_warn(tp, ifup, tp->dev, "unable to load firmware patch %s (%d)\n",
name, rc);
out_no_firmware:
tp->rtl_fw = NULL;
goto out;
}
static void rtl_request_firmware(struct rtl8169_private *tp)
{
if (IS_ERR(tp->rtl_fw))
rtl_request_uncached_firmware(tp);
}
static int rtl8169_open(struct net_device *dev)
{
struct rtl8169_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
struct pci_dev *pdev = tp->pci_dev;
int retval = -ENOMEM;
pm_runtime_get_sync(&pdev->dev);
/*
* Rx and Tx desscriptors needs 256 bytes alignment.
* dma_alloc_coherent provides more.
*/
tp->TxDescArray = dma_alloc_coherent(&pdev->dev, R8169_TX_RING_BYTES,
&tp->TxPhyAddr, GFP_KERNEL);
if (!tp->TxDescArray)
goto err_pm_runtime_put;
tp->RxDescArray = dma_alloc_coherent(&pdev->dev, R8169_RX_RING_BYTES,
&tp->RxPhyAddr, GFP_KERNEL);
if (!tp->RxDescArray)
goto err_free_tx_0;
retval = rtl8169_init_ring(dev);
if (retval < 0)
goto err_free_rx_1;
INIT_DELAYED_WORK(&tp->task, NULL);
smp_mb();
rtl_request_firmware(tp);
retval = request_irq(dev->irq, rtl8169_interrupt,
(tp->features & RTL_FEATURE_MSI) ? 0 : IRQF_SHARED,
dev->name, dev);
if (retval < 0)
goto err_release_fw_2;
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 06:41:36 +07:00
napi_enable(&tp->napi);
rtl8169_init_phy(dev, tp);
rtl8169_set_features(dev, dev->features);
rtl_pll_power_up(tp);
rtl_hw_start(dev);
tp->saved_wolopts = 0;
pm_runtime_put_noidle(&pdev->dev);
rtl8169_check_link_status(dev, tp, ioaddr);
out:
return retval;
err_release_fw_2:
rtl_release_firmware(tp);
rtl8169_rx_clear(tp);
err_free_rx_1:
dma_free_coherent(&pdev->dev, R8169_RX_RING_BYTES, tp->RxDescArray,
tp->RxPhyAddr);
tp->RxDescArray = NULL;
err_free_tx_0:
dma_free_coherent(&pdev->dev, R8169_TX_RING_BYTES, tp->TxDescArray,
tp->TxPhyAddr);
tp->TxDescArray = NULL;
err_pm_runtime_put:
pm_runtime_put_noidle(&pdev->dev);
goto out;
}
static void rtl_rx_close(struct rtl8169_private *tp)
{
void __iomem *ioaddr = tp->mmio_addr;
RTL_W32(RxConfig, RTL_R32(RxConfig) & ~RX_CONFIG_ACCEPT_MASK);
}
static void rtl8169_hw_reset(struct rtl8169_private *tp)
{
void __iomem *ioaddr = tp->mmio_addr;
/* Disable interrupts */
rtl8169_irq_mask_and_ack(ioaddr);
rtl_rx_close(tp);
if (tp->mac_version == RTL_GIGA_MAC_VER_27 ||
tp->mac_version == RTL_GIGA_MAC_VER_28 ||
tp->mac_version == RTL_GIGA_MAC_VER_31) {
while (RTL_R8(TxPoll) & NPQ)
udelay(20);
} else if (tp->mac_version == RTL_GIGA_MAC_VER_34) {
while (!(RTL_R32(TxConfig) & TXCFG_EMPTY))
udelay(100);
} else {
RTL_W8(ChipCmd, RTL_R8(ChipCmd) | StopReq);
udelay(100);
}
rtl_hw_reset(tp);
}
static void rtl_set_rx_tx_config_registers(struct rtl8169_private *tp)
{
void __iomem *ioaddr = tp->mmio_addr;
/* Set DMA burst size and Interframe Gap Time */
RTL_W32(TxConfig, (TX_DMA_BURST << TxDMAShift) |
(InterFrameGap << TxInterFrameGapShift));
}
static void rtl_hw_start(struct net_device *dev)
{
struct rtl8169_private *tp = netdev_priv(dev);
tp->hw_start(dev);
netif_start_queue(dev);
}
static void rtl_set_rx_tx_desc_registers(struct rtl8169_private *tp,
void __iomem *ioaddr)
{
/*
* Magic spell: some iop3xx ARM board needs the TxDescAddrHigh
* register to be written before TxDescAddrLow to work.
* Switching from MMIO to I/O access fixes the issue as well.
*/
RTL_W32(TxDescStartAddrHigh, ((u64) tp->TxPhyAddr) >> 32);
RTL_W32(TxDescStartAddrLow, ((u64) tp->TxPhyAddr) & DMA_BIT_MASK(32));
RTL_W32(RxDescAddrHigh, ((u64) tp->RxPhyAddr) >> 32);
RTL_W32(RxDescAddrLow, ((u64) tp->RxPhyAddr) & DMA_BIT_MASK(32));
}
static u16 rtl_rw_cpluscmd(void __iomem *ioaddr)
{
u16 cmd;
cmd = RTL_R16(CPlusCmd);
RTL_W16(CPlusCmd, cmd);
return cmd;
}
static void rtl_set_rx_max_size(void __iomem *ioaddr, unsigned int rx_buf_sz)
{
/* Low hurts. Let's disable the filtering. */
RTL_W16(RxMaxSize, rx_buf_sz + 1);
}
static void rtl8169_set_magic_reg(void __iomem *ioaddr, unsigned mac_version)
{
static const struct rtl_cfg2_info {
u32 mac_version;
u32 clk;
u32 val;
} cfg2_info [] = {
{ RTL_GIGA_MAC_VER_05, PCI_Clock_33MHz, 0x000fff00 }, // 8110SCd
{ RTL_GIGA_MAC_VER_05, PCI_Clock_66MHz, 0x000fffff },
{ RTL_GIGA_MAC_VER_06, PCI_Clock_33MHz, 0x00ffff00 }, // 8110SCe
{ RTL_GIGA_MAC_VER_06, PCI_Clock_66MHz, 0x00ffffff }
};
const struct rtl_cfg2_info *p = cfg2_info;
unsigned int i;
u32 clk;
clk = RTL_R8(Config2) & PCI_Clock_66MHz;
for (i = 0; i < ARRAY_SIZE(cfg2_info); i++, p++) {
if ((p->mac_version == mac_version) && (p->clk == clk)) {
RTL_W32(0x7c, p->val);
break;
}
}
}
static void rtl_hw_start_8169(struct net_device *dev)
{
struct rtl8169_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
struct pci_dev *pdev = tp->pci_dev;
if (tp->mac_version == RTL_GIGA_MAC_VER_05) {
RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) | PCIMulRW);
pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, 0x08);
}
RTL_W8(Cfg9346, Cfg9346_Unlock);
if (tp->mac_version == RTL_GIGA_MAC_VER_01 ||
tp->mac_version == RTL_GIGA_MAC_VER_02 ||
tp->mac_version == RTL_GIGA_MAC_VER_03 ||
tp->mac_version == RTL_GIGA_MAC_VER_04)
RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
rtl_init_rxcfg(tp);
RTL_W8(EarlyTxThres, NoEarlyTx);
rtl_set_rx_max_size(ioaddr, rx_buf_sz);
if (tp->mac_version == RTL_GIGA_MAC_VER_01 ||
tp->mac_version == RTL_GIGA_MAC_VER_02 ||
tp->mac_version == RTL_GIGA_MAC_VER_03 ||
tp->mac_version == RTL_GIGA_MAC_VER_04)
rtl_set_rx_tx_config_registers(tp);
tp->cp_cmd |= rtl_rw_cpluscmd(ioaddr) | PCIMulRW;
if (tp->mac_version == RTL_GIGA_MAC_VER_02 ||
tp->mac_version == RTL_GIGA_MAC_VER_03) {
dprintk("Set MAC Reg C+CR Offset 0xE0. "
"Bit-3 and bit-14 MUST be 1\n");
r8169: sync with vendor's driver - add several PCI ID for the PCI-E adapters ; - new identification strings ; - the RTL_GIGA_MAC_VER_ defines have been renamed to closely match the out-of-tree driver. It makes the comparison less hairy ; - various magic ; - the PCI region for the device with PCI ID 0x8136 is guessed. Explanation: the in-kernel Linux driver is written to allow MM register accesses and avoid the IO tax. The relevant BAR register was found at base address 1 for the plain-old PCI 8169. User reported lspci show that it is found at base address 2 for the new Gigabit PCI-E 816{8/9}. Typically: 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.: Unknown device 8168 (rev 01) Subsystem: Unknown device 1631:e015 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 20 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at b800 [size=256] Region 2: Memory at ff7ff000 (64-bit, non-prefetchable) [size=4K] ^^^^^^^^ So far I have not received any lspci report for the 0x8136 and Realtek's driver do not help: be it under BSD or Linux, their r1000 driver include a USE_IO_SPACE #define but the bar address is always hardcoded to 1 in the MM case. :o/ - the 8168 has been reported to require an extra alignment for its receive buffers. The status of the 8167 and 8136 is not known in this regard. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-07-27 04:14:13 +07:00
tp->cp_cmd |= (1 << 14);
}
r8169: sync with vendor's driver - add several PCI ID for the PCI-E adapters ; - new identification strings ; - the RTL_GIGA_MAC_VER_ defines have been renamed to closely match the out-of-tree driver. It makes the comparison less hairy ; - various magic ; - the PCI region for the device with PCI ID 0x8136 is guessed. Explanation: the in-kernel Linux driver is written to allow MM register accesses and avoid the IO tax. The relevant BAR register was found at base address 1 for the plain-old PCI 8169. User reported lspci show that it is found at base address 2 for the new Gigabit PCI-E 816{8/9}. Typically: 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.: Unknown device 8168 (rev 01) Subsystem: Unknown device 1631:e015 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 20 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at b800 [size=256] Region 2: Memory at ff7ff000 (64-bit, non-prefetchable) [size=4K] ^^^^^^^^ So far I have not received any lspci report for the 0x8136 and Realtek's driver do not help: be it under BSD or Linux, their r1000 driver include a USE_IO_SPACE #define but the bar address is always hardcoded to 1 in the MM case. :o/ - the 8168 has been reported to require an extra alignment for its receive buffers. The status of the 8167 and 8136 is not known in this regard. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-07-27 04:14:13 +07:00
RTL_W16(CPlusCmd, tp->cp_cmd);
rtl8169_set_magic_reg(ioaddr, tp->mac_version);
/*
* Undocumented corner. Supposedly:
* (TxTimer << 12) | (TxPackets << 8) | (RxTimer << 4) | RxPackets
*/
RTL_W16(IntrMitigate, 0x0000);
rtl_set_rx_tx_desc_registers(tp, ioaddr);
if (tp->mac_version != RTL_GIGA_MAC_VER_01 &&
tp->mac_version != RTL_GIGA_MAC_VER_02 &&
tp->mac_version != RTL_GIGA_MAC_VER_03 &&
tp->mac_version != RTL_GIGA_MAC_VER_04) {
RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
rtl_set_rx_tx_config_registers(tp);
}
RTL_W8(Cfg9346, Cfg9346_Lock);
/* Initially a 10 us delay. Turned it into a PCI commit. - FR */
RTL_R8(IntrMask);
RTL_W32(RxMissed, 0);
rtl_set_rx_mode(dev);
/* no early-rx interrupts */
RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xF000);
/* Enable all known interrupts by setting the interrupt mask. */
RTL_W16(IntrMask, tp->intr_event);
}
static void rtl_tx_performance_tweak(struct pci_dev *pdev, u16 force)
{
int cap = pci_pcie_cap(pdev);
if (cap) {
u16 ctl;
pci_read_config_word(pdev, cap + PCI_EXP_DEVCTL, &ctl);
ctl = (ctl & ~PCI_EXP_DEVCTL_READRQ) | force;
pci_write_config_word(pdev, cap + PCI_EXP_DEVCTL, ctl);
}
}
static void rtl_csi_access_enable(void __iomem *ioaddr, u32 bits)
{
u32 csi;
csi = rtl_csi_read(ioaddr, 0x070c) & 0x00ffffff;
rtl_csi_write(ioaddr, 0x070c, csi | bits);
}
static void rtl_csi_access_enable_1(void __iomem *ioaddr)
{
rtl_csi_access_enable(ioaddr, 0x17000000);
}
static void rtl_csi_access_enable_2(void __iomem *ioaddr)
{
rtl_csi_access_enable(ioaddr, 0x27000000);
}
struct ephy_info {
unsigned int offset;
u16 mask;
u16 bits;
};
static void rtl_ephy_init(void __iomem *ioaddr, const struct ephy_info *e, int len)
{
u16 w;
while (len-- > 0) {
w = (rtl_ephy_read(ioaddr, e->offset) & ~e->mask) | e->bits;
rtl_ephy_write(ioaddr, e->offset, w);
e++;
}
}
static void rtl_disable_clock_request(struct pci_dev *pdev)
{
int cap = pci_pcie_cap(pdev);
if (cap) {
u16 ctl;
pci_read_config_word(pdev, cap + PCI_EXP_LNKCTL, &ctl);
ctl &= ~PCI_EXP_LNKCTL_CLKREQ_EN;
pci_write_config_word(pdev, cap + PCI_EXP_LNKCTL, ctl);
}
}
static void rtl_enable_clock_request(struct pci_dev *pdev)
{
int cap = pci_pcie_cap(pdev);
if (cap) {
u16 ctl;
pci_read_config_word(pdev, cap + PCI_EXP_LNKCTL, &ctl);
ctl |= PCI_EXP_LNKCTL_CLKREQ_EN;
pci_write_config_word(pdev, cap + PCI_EXP_LNKCTL, ctl);
}
}
#define R8168_CPCMD_QUIRK_MASK (\
EnableBist | \
Mac_dbgo_oe | \
Force_half_dup | \
Force_rxflow_en | \
Force_txflow_en | \
Cxpl_dbg_sel | \
ASF | \
PktCntrDisable | \
Mac_dbgo_sel)
static void rtl_hw_start_8168bb(void __iomem *ioaddr, struct pci_dev *pdev)
{
RTL_W8(Config3, RTL_R8(Config3) & ~Beacon_en);
RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R8168_CPCMD_QUIRK_MASK);
rtl_tx_performance_tweak(pdev,
(0x5 << MAX_READ_REQUEST_SHIFT) | PCI_EXP_DEVCTL_NOSNOOP_EN);
}
static void rtl_hw_start_8168bef(void __iomem *ioaddr, struct pci_dev *pdev)
{
rtl_hw_start_8168bb(ioaddr, pdev);
RTL_W8(MaxTxPacketSize, TxPacketMax);
RTL_W8(Config4, RTL_R8(Config4) & ~(1 << 0));
}
static void __rtl_hw_start_8168cp(void __iomem *ioaddr, struct pci_dev *pdev)
{
RTL_W8(Config1, RTL_R8(Config1) | Speed_down);
RTL_W8(Config3, RTL_R8(Config3) & ~Beacon_en);
rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
rtl_disable_clock_request(pdev);
RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R8168_CPCMD_QUIRK_MASK);
}
static void rtl_hw_start_8168cp_1(void __iomem *ioaddr, struct pci_dev *pdev)
{
static const struct ephy_info e_info_8168cp[] = {
{ 0x01, 0, 0x0001 },
{ 0x02, 0x0800, 0x1000 },
{ 0x03, 0, 0x0042 },
{ 0x06, 0x0080, 0x0000 },
{ 0x07, 0, 0x2000 }
};
rtl_csi_access_enable_2(ioaddr);
rtl_ephy_init(ioaddr, e_info_8168cp, ARRAY_SIZE(e_info_8168cp));
__rtl_hw_start_8168cp(ioaddr, pdev);
}
static void rtl_hw_start_8168cp_2(void __iomem *ioaddr, struct pci_dev *pdev)
{
rtl_csi_access_enable_2(ioaddr);
RTL_W8(Config3, RTL_R8(Config3) & ~Beacon_en);
rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R8168_CPCMD_QUIRK_MASK);
}
static void rtl_hw_start_8168cp_3(void __iomem *ioaddr, struct pci_dev *pdev)
{
rtl_csi_access_enable_2(ioaddr);
RTL_W8(Config3, RTL_R8(Config3) & ~Beacon_en);
/* Magic. */
RTL_W8(DBG_REG, 0x20);
RTL_W8(MaxTxPacketSize, TxPacketMax);
rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R8168_CPCMD_QUIRK_MASK);
}
static void rtl_hw_start_8168c_1(void __iomem *ioaddr, struct pci_dev *pdev)
{
static const struct ephy_info e_info_8168c_1[] = {
{ 0x02, 0x0800, 0x1000 },
{ 0x03, 0, 0x0002 },
{ 0x06, 0x0080, 0x0000 }
};
rtl_csi_access_enable_2(ioaddr);
RTL_W8(DBG_REG, 0x06 | FIX_NAK_1 | FIX_NAK_2);
rtl_ephy_init(ioaddr, e_info_8168c_1, ARRAY_SIZE(e_info_8168c_1));
__rtl_hw_start_8168cp(ioaddr, pdev);
}
static void rtl_hw_start_8168c_2(void __iomem *ioaddr, struct pci_dev *pdev)
{
static const struct ephy_info e_info_8168c_2[] = {
{ 0x01, 0, 0x0001 },
{ 0x03, 0x0400, 0x0220 }
};
rtl_csi_access_enable_2(ioaddr);
rtl_ephy_init(ioaddr, e_info_8168c_2, ARRAY_SIZE(e_info_8168c_2));
__rtl_hw_start_8168cp(ioaddr, pdev);
}
static void rtl_hw_start_8168c_3(void __iomem *ioaddr, struct pci_dev *pdev)
{
rtl_hw_start_8168c_2(ioaddr, pdev);
}
static void rtl_hw_start_8168c_4(void __iomem *ioaddr, struct pci_dev *pdev)
{
rtl_csi_access_enable_2(ioaddr);
__rtl_hw_start_8168cp(ioaddr, pdev);
}
static void rtl_hw_start_8168d(void __iomem *ioaddr, struct pci_dev *pdev)
{
rtl_csi_access_enable_2(ioaddr);
rtl_disable_clock_request(pdev);
RTL_W8(MaxTxPacketSize, TxPacketMax);
rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R8168_CPCMD_QUIRK_MASK);
}
static void rtl_hw_start_8168dp(void __iomem *ioaddr, struct pci_dev *pdev)
{
rtl_csi_access_enable_1(ioaddr);
rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
RTL_W8(MaxTxPacketSize, TxPacketMax);
rtl_disable_clock_request(pdev);
}
static void rtl_hw_start_8168d_4(void __iomem *ioaddr, struct pci_dev *pdev)
{
static const struct ephy_info e_info_8168d_4[] = {
{ 0x0b, ~0, 0x48 },
{ 0x19, 0x20, 0x50 },
{ 0x0c, ~0, 0x20 }
};
int i;
rtl_csi_access_enable_1(ioaddr);
rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
RTL_W8(MaxTxPacketSize, TxPacketMax);
for (i = 0; i < ARRAY_SIZE(e_info_8168d_4); i++) {
const struct ephy_info *e = e_info_8168d_4 + i;
u16 w;
w = rtl_ephy_read(ioaddr, e->offset);
rtl_ephy_write(ioaddr, 0x03, (w & e->mask) | e->bits);
}
rtl_enable_clock_request(pdev);
}
static void rtl_hw_start_8168e_1(void __iomem *ioaddr, struct pci_dev *pdev)
{
static const struct ephy_info e_info_8168e_1[] = {
{ 0x00, 0x0200, 0x0100 },
{ 0x00, 0x0000, 0x0004 },
{ 0x06, 0x0002, 0x0001 },
{ 0x06, 0x0000, 0x0030 },
{ 0x07, 0x0000, 0x2000 },
{ 0x00, 0x0000, 0x0020 },
{ 0x03, 0x5800, 0x2000 },
{ 0x03, 0x0000, 0x0001 },
{ 0x01, 0x0800, 0x1000 },
{ 0x07, 0x0000, 0x4000 },
{ 0x1e, 0x0000, 0x2000 },
{ 0x19, 0xffff, 0xfe6c },
{ 0x0a, 0x0000, 0x0040 }
};
rtl_csi_access_enable_2(ioaddr);
rtl_ephy_init(ioaddr, e_info_8168e_1, ARRAY_SIZE(e_info_8168e_1));
rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
RTL_W8(MaxTxPacketSize, TxPacketMax);
rtl_disable_clock_request(pdev);
/* Reset tx FIFO pointer */
RTL_W32(MISC, RTL_R32(MISC) | TXPLA_RST);
RTL_W32(MISC, RTL_R32(MISC) & ~TXPLA_RST);
RTL_W8(Config5, RTL_R8(Config5) & ~Spi_en);
}
static void rtl_hw_start_8168e_2(void __iomem *ioaddr, struct pci_dev *pdev)
{
static const struct ephy_info e_info_8168e_2[] = {
{ 0x09, 0x0000, 0x0080 },
{ 0x19, 0x0000, 0x0224 }
};
rtl_csi_access_enable_1(ioaddr);
rtl_ephy_init(ioaddr, e_info_8168e_2, ARRAY_SIZE(e_info_8168e_2));
rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
rtl_eri_write(ioaddr, 0xc0, ERIAR_MASK_0011, 0x0000, ERIAR_EXGMAC);
rtl_eri_write(ioaddr, 0xb8, ERIAR_MASK_0011, 0x0000, ERIAR_EXGMAC);
rtl_eri_write(ioaddr, 0xc8, ERIAR_MASK_1111, 0x00100002, ERIAR_EXGMAC);
rtl_eri_write(ioaddr, 0xe8, ERIAR_MASK_1111, 0x00100006, ERIAR_EXGMAC);
rtl_eri_write(ioaddr, 0xcc, ERIAR_MASK_1111, 0x00000050, ERIAR_EXGMAC);
rtl_eri_write(ioaddr, 0xd0, ERIAR_MASK_1111, 0x07ff0060, ERIAR_EXGMAC);
rtl_w1w0_eri(ioaddr, 0x1b0, ERIAR_MASK_0001, 0x10, 0x00, ERIAR_EXGMAC);
rtl_w1w0_eri(ioaddr, 0x0d4, ERIAR_MASK_0011, 0x0c00, 0xff00,
ERIAR_EXGMAC);
RTL_W8(MaxTxPacketSize, 0x27);
rtl_disable_clock_request(pdev);
RTL_W32(TxConfig, RTL_R32(TxConfig) | TXCFG_AUTO_FIFO);
RTL_W8(MCU, RTL_R8(MCU) & ~NOW_IS_OOB);
/* Adjust EEE LED frequency */
RTL_W8(EEE_LED, RTL_R8(EEE_LED) & ~0x07);
RTL_W8(DLLPR, RTL_R8(DLLPR) | PFM_EN);
RTL_W32(MISC, RTL_R32(MISC) | PWM_EN);
RTL_W8(Config5, RTL_R8(Config5) & ~Spi_en);
}
static void rtl_hw_start_8168(struct net_device *dev)
{
struct rtl8169_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
struct pci_dev *pdev = tp->pci_dev;
RTL_W8(Cfg9346, Cfg9346_Unlock);
RTL_W8(MaxTxPacketSize, TxPacketMax);
rtl_set_rx_max_size(ioaddr, rx_buf_sz);
tp->cp_cmd |= RTL_R16(CPlusCmd) | PktCntrDisable | INTT_1;
RTL_W16(CPlusCmd, tp->cp_cmd);
RTL_W16(IntrMitigate, 0x5151);
/* Work around for RxFIFO overflow. */
if (tp->mac_version == RTL_GIGA_MAC_VER_11 ||
tp->mac_version == RTL_GIGA_MAC_VER_22) {
tp->intr_event |= RxFIFOOver | PCSTimeout;
tp->intr_event &= ~RxOverflow;
}
rtl_set_rx_tx_desc_registers(tp, ioaddr);
rtl_set_rx_mode(dev);
RTL_W32(TxConfig, (TX_DMA_BURST << TxDMAShift) |
(InterFrameGap << TxInterFrameGapShift));
RTL_R8(IntrMask);
switch (tp->mac_version) {
case RTL_GIGA_MAC_VER_11:
rtl_hw_start_8168bb(ioaddr, pdev);
break;
case RTL_GIGA_MAC_VER_12:
case RTL_GIGA_MAC_VER_17:
rtl_hw_start_8168bef(ioaddr, pdev);
break;
case RTL_GIGA_MAC_VER_18:
rtl_hw_start_8168cp_1(ioaddr, pdev);
break;
case RTL_GIGA_MAC_VER_19:
rtl_hw_start_8168c_1(ioaddr, pdev);
break;
case RTL_GIGA_MAC_VER_20:
rtl_hw_start_8168c_2(ioaddr, pdev);
break;
case RTL_GIGA_MAC_VER_21:
rtl_hw_start_8168c_3(ioaddr, pdev);
break;
case RTL_GIGA_MAC_VER_22:
rtl_hw_start_8168c_4(ioaddr, pdev);
break;
case RTL_GIGA_MAC_VER_23:
rtl_hw_start_8168cp_2(ioaddr, pdev);
break;
case RTL_GIGA_MAC_VER_24:
rtl_hw_start_8168cp_3(ioaddr, pdev);
break;
case RTL_GIGA_MAC_VER_25:
case RTL_GIGA_MAC_VER_26:
case RTL_GIGA_MAC_VER_27:
rtl_hw_start_8168d(ioaddr, pdev);
break;
case RTL_GIGA_MAC_VER_28:
rtl_hw_start_8168d_4(ioaddr, pdev);
break;
case RTL_GIGA_MAC_VER_31:
rtl_hw_start_8168dp(ioaddr, pdev);
break;
case RTL_GIGA_MAC_VER_32:
case RTL_GIGA_MAC_VER_33:
rtl_hw_start_8168e_1(ioaddr, pdev);
break;
case RTL_GIGA_MAC_VER_34:
rtl_hw_start_8168e_2(ioaddr, pdev);
break;
default:
printk(KERN_ERR PFX "%s: unknown chipset (mac_version = %d).\n",
dev->name, tp->mac_version);
break;
}
RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
RTL_W8(Cfg9346, Cfg9346_Lock);
RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xF000);
RTL_W16(IntrMask, tp->intr_event);
}
#define R810X_CPCMD_QUIRK_MASK (\
EnableBist | \
Mac_dbgo_oe | \
Force_half_dup | \
Force_rxflow_en | \
Force_txflow_en | \
Cxpl_dbg_sel | \
ASF | \
PktCntrDisable | \
Mac_dbgo_sel)
static void rtl_hw_start_8102e_1(void __iomem *ioaddr, struct pci_dev *pdev)
{
static const struct ephy_info e_info_8102e_1[] = {
{ 0x01, 0, 0x6e65 },
{ 0x02, 0, 0x091f },
{ 0x03, 0, 0xc2f9 },
{ 0x06, 0, 0xafb5 },
{ 0x07, 0, 0x0e00 },
{ 0x19, 0, 0xec80 },
{ 0x01, 0, 0x2e65 },
{ 0x01, 0, 0x6e65 }
};
u8 cfg1;
rtl_csi_access_enable_2(ioaddr);
RTL_W8(DBG_REG, FIX_NAK_1);
rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
RTL_W8(Config1,
LEDS1 | LEDS0 | Speed_down | MEMMAP | IOMAP | VPD | PMEnable);
RTL_W8(Config3, RTL_R8(Config3) & ~Beacon_en);
cfg1 = RTL_R8(Config1);
if ((cfg1 & LEDS0) && (cfg1 & LEDS1))
RTL_W8(Config1, cfg1 & ~LEDS0);
rtl_ephy_init(ioaddr, e_info_8102e_1, ARRAY_SIZE(e_info_8102e_1));
}
static void rtl_hw_start_8102e_2(void __iomem *ioaddr, struct pci_dev *pdev)
{
rtl_csi_access_enable_2(ioaddr);
rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
RTL_W8(Config1, MEMMAP | IOMAP | VPD | PMEnable);
RTL_W8(Config3, RTL_R8(Config3) & ~Beacon_en);
}
static void rtl_hw_start_8102e_3(void __iomem *ioaddr, struct pci_dev *pdev)
{
rtl_hw_start_8102e_2(ioaddr, pdev);
rtl_ephy_write(ioaddr, 0x03, 0xc2f9);
}
static void rtl_hw_start_8105e_1(void __iomem *ioaddr, struct pci_dev *pdev)
{
static const struct ephy_info e_info_8105e_1[] = {
{ 0x07, 0, 0x4000 },
{ 0x19, 0, 0x0200 },
{ 0x19, 0, 0x0020 },
{ 0x1e, 0, 0x2000 },
{ 0x03, 0, 0x0001 },
{ 0x19, 0, 0x0100 },
{ 0x19, 0, 0x0004 },
{ 0x0a, 0, 0x0020 }
};
/* Force LAN exit from ASPM if Rx/Tx are not idle */
RTL_W32(FuncEvent, RTL_R32(FuncEvent) | 0x002800);
/* Disable Early Tally Counter */
RTL_W32(FuncEvent, RTL_R32(FuncEvent) & ~0x010000);
RTL_W8(MCU, RTL_R8(MCU) | EN_NDP | EN_OOB_RESET);
RTL_W8(DLLPR, RTL_R8(DLLPR) | PFM_EN);
rtl_ephy_init(ioaddr, e_info_8105e_1, ARRAY_SIZE(e_info_8105e_1));
}
static void rtl_hw_start_8105e_2(void __iomem *ioaddr, struct pci_dev *pdev)
{
rtl_hw_start_8105e_1(ioaddr, pdev);
rtl_ephy_write(ioaddr, 0x1e, rtl_ephy_read(ioaddr, 0x1e) | 0x8000);
}
static void rtl_hw_start_8101(struct net_device *dev)
{
struct rtl8169_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
struct pci_dev *pdev = tp->pci_dev;
if (tp->mac_version == RTL_GIGA_MAC_VER_13 ||
tp->mac_version == RTL_GIGA_MAC_VER_16) {
int cap = pci_pcie_cap(pdev);
if (cap) {
pci_write_config_word(pdev, cap + PCI_EXP_DEVCTL,
PCI_EXP_DEVCTL_NOSNOOP_EN);
}
}
RTL_W8(Cfg9346, Cfg9346_Unlock);
switch (tp->mac_version) {
case RTL_GIGA_MAC_VER_07:
rtl_hw_start_8102e_1(ioaddr, pdev);
break;
case RTL_GIGA_MAC_VER_08:
rtl_hw_start_8102e_3(ioaddr, pdev);
break;
case RTL_GIGA_MAC_VER_09:
rtl_hw_start_8102e_2(ioaddr, pdev);
break;
case RTL_GIGA_MAC_VER_29:
rtl_hw_start_8105e_1(ioaddr, pdev);
break;
case RTL_GIGA_MAC_VER_30:
rtl_hw_start_8105e_2(ioaddr, pdev);
break;
}
RTL_W8(Cfg9346, Cfg9346_Lock);
RTL_W8(MaxTxPacketSize, TxPacketMax);
rtl_set_rx_max_size(ioaddr, rx_buf_sz);
tp->cp_cmd &= ~R810X_CPCMD_QUIRK_MASK;
RTL_W16(CPlusCmd, tp->cp_cmd);
RTL_W16(IntrMitigate, 0x0000);
rtl_set_rx_tx_desc_registers(tp, ioaddr);
RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
rtl_set_rx_tx_config_registers(tp);
RTL_R8(IntrMask);
rtl_set_rx_mode(dev);
RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xf000);
RTL_W16(IntrMask, tp->intr_event);
}
static int rtl8169_change_mtu(struct net_device *dev, int new_mtu)
{
if (new_mtu < ETH_ZLEN || new_mtu > SafeMtu)
return -EINVAL;
dev->mtu = new_mtu;
netdev_update_features(dev);
return 0;
}
static inline void rtl8169_make_unusable_by_asic(struct RxDesc *desc)
{
desc->addr = cpu_to_le64(0x0badbadbadbadbadull);
desc->opts1 &= ~cpu_to_le32(DescOwn | RsvdMask);
}
static void rtl8169_free_rx_databuff(struct rtl8169_private *tp,
void **data_buff, struct RxDesc *desc)
{
dma_unmap_single(&tp->pci_dev->dev, le64_to_cpu(desc->addr), rx_buf_sz,
DMA_FROM_DEVICE);
kfree(*data_buff);
*data_buff = NULL;
rtl8169_make_unusable_by_asic(desc);
}
static inline void rtl8169_mark_to_asic(struct RxDesc *desc, u32 rx_buf_sz)
{
u32 eor = le32_to_cpu(desc->opts1) & RingEnd;
desc->opts1 = cpu_to_le32(DescOwn | eor | rx_buf_sz);
}
static inline void rtl8169_map_to_asic(struct RxDesc *desc, dma_addr_t mapping,
u32 rx_buf_sz)
{
desc->addr = cpu_to_le64(mapping);
wmb();
rtl8169_mark_to_asic(desc, rx_buf_sz);
}
static inline void *rtl8169_align(void *data)
{
return (void *)ALIGN((long)data, 16);
}
static struct sk_buff *rtl8169_alloc_rx_data(struct rtl8169_private *tp,
struct RxDesc *desc)
{
void *data;
dma_addr_t mapping;
struct device *d = &tp->pci_dev->dev;
struct net_device *dev = tp->dev;
int node = dev->dev.parent ? dev_to_node(dev->dev.parent) : -1;
data = kmalloc_node(rx_buf_sz, GFP_KERNEL, node);
if (!data)
return NULL;
if (rtl8169_align(data) != data) {
kfree(data);
data = kmalloc_node(rx_buf_sz + 15, GFP_KERNEL, node);
if (!data)
return NULL;
}
mapping = dma_map_single(d, rtl8169_align(data), rx_buf_sz,
DMA_FROM_DEVICE);
if (unlikely(dma_mapping_error(d, mapping))) {
if (net_ratelimit())
netif_err(tp, drv, tp->dev, "Failed to map RX DMA!\n");
goto err_out;
}
rtl8169_map_to_asic(desc, mapping, rx_buf_sz);
return data;
err_out:
kfree(data);
return NULL;
}
static void rtl8169_rx_clear(struct rtl8169_private *tp)
{
unsigned int i;
for (i = 0; i < NUM_RX_DESC; i++) {
if (tp->Rx_databuff[i]) {
rtl8169_free_rx_databuff(tp, tp->Rx_databuff + i,
tp->RxDescArray + i);
}
}
}
static inline void rtl8169_mark_as_last_descriptor(struct RxDesc *desc)
{
desc->opts1 |= cpu_to_le32(RingEnd);
}
static int rtl8169_rx_fill(struct rtl8169_private *tp)
{
unsigned int i;
for (i = 0; i < NUM_RX_DESC; i++) {
void *data;
if (tp->Rx_databuff[i])
continue;
r8169: sync with vendor's driver - add several PCI ID for the PCI-E adapters ; - new identification strings ; - the RTL_GIGA_MAC_VER_ defines have been renamed to closely match the out-of-tree driver. It makes the comparison less hairy ; - various magic ; - the PCI region for the device with PCI ID 0x8136 is guessed. Explanation: the in-kernel Linux driver is written to allow MM register accesses and avoid the IO tax. The relevant BAR register was found at base address 1 for the plain-old PCI 8169. User reported lspci show that it is found at base address 2 for the new Gigabit PCI-E 816{8/9}. Typically: 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.: Unknown device 8168 (rev 01) Subsystem: Unknown device 1631:e015 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 20 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at b800 [size=256] Region 2: Memory at ff7ff000 (64-bit, non-prefetchable) [size=4K] ^^^^^^^^ So far I have not received any lspci report for the 0x8136 and Realtek's driver do not help: be it under BSD or Linux, their r1000 driver include a USE_IO_SPACE #define but the bar address is always hardcoded to 1 in the MM case. :o/ - the 8168 has been reported to require an extra alignment for its receive buffers. The status of the 8167 and 8136 is not known in this regard. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-07-27 04:14:13 +07:00
data = rtl8169_alloc_rx_data(tp, tp->RxDescArray + i);
if (!data) {
rtl8169_make_unusable_by_asic(tp->RxDescArray + i);
goto err_out;
}
tp->Rx_databuff[i] = data;
}
rtl8169_mark_as_last_descriptor(tp->RxDescArray + NUM_RX_DESC - 1);
return 0;
err_out:
rtl8169_rx_clear(tp);
return -ENOMEM;
}
static int rtl8169_init_ring(struct net_device *dev)
{
struct rtl8169_private *tp = netdev_priv(dev);
rtl8169_init_ring_indexes(tp);
memset(tp->tx_skb, 0x0, NUM_TX_DESC * sizeof(struct ring_info));
memset(tp->Rx_databuff, 0x0, NUM_RX_DESC * sizeof(void *));
return rtl8169_rx_fill(tp);
}
static void rtl8169_unmap_tx_skb(struct device *d, struct ring_info *tx_skb,
struct TxDesc *desc)
{
unsigned int len = tx_skb->len;
dma_unmap_single(d, le64_to_cpu(desc->addr), len, DMA_TO_DEVICE);
desc->opts1 = 0x00;
desc->opts2 = 0x00;
desc->addr = 0x00;
tx_skb->len = 0;
}
static void rtl8169_tx_clear_range(struct rtl8169_private *tp, u32 start,
unsigned int n)
{
unsigned int i;
for (i = 0; i < n; i++) {
unsigned int entry = (start + i) % NUM_TX_DESC;
struct ring_info *tx_skb = tp->tx_skb + entry;
unsigned int len = tx_skb->len;
if (len) {
struct sk_buff *skb = tx_skb->skb;
rtl8169_unmap_tx_skb(&tp->pci_dev->dev, tx_skb,
tp->TxDescArray + entry);
if (skb) {
tp->dev->stats.tx_dropped++;
dev_kfree_skb(skb);
tx_skb->skb = NULL;
}
}
}
}
static void rtl8169_tx_clear(struct rtl8169_private *tp)
{
rtl8169_tx_clear_range(tp, tp->dirty_tx, NUM_TX_DESC);
tp->cur_tx = tp->dirty_tx = 0;
}
static void rtl8169_schedule_work(struct net_device *dev, work_func_t task)
{
struct rtl8169_private *tp = netdev_priv(dev);
PREPARE_DELAYED_WORK(&tp->task, task);
schedule_delayed_work(&tp->task, 4);
}
static void rtl8169_wait_for_quiescence(struct net_device *dev)
{
struct rtl8169_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
synchronize_irq(dev->irq);
/* Wait for any pending NAPI task to complete */
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 06:41:36 +07:00
napi_disable(&tp->napi);
rtl8169_irq_mask_and_ack(ioaddr);
tp->intr_mask = 0xffff;
RTL_W16(IntrMask, tp->intr_event);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 06:41:36 +07:00
napi_enable(&tp->napi);
}
static void rtl8169_reinit_task(struct work_struct *work)
{
struct rtl8169_private *tp =
container_of(work, struct rtl8169_private, task.work);
struct net_device *dev = tp->dev;
int ret;
rtnl_lock();
if (!netif_running(dev))
goto out_unlock;
rtl8169_wait_for_quiescence(dev);
rtl8169_close(dev);
ret = rtl8169_open(dev);
if (unlikely(ret < 0)) {
if (net_ratelimit())
netif_err(tp, drv, dev,
"reinit failure (status = %d). Rescheduling\n",
ret);
rtl8169_schedule_work(dev, rtl8169_reinit_task);
}
out_unlock:
rtnl_unlock();
}
static void rtl8169_reset_task(struct work_struct *work)
{
struct rtl8169_private *tp =
container_of(work, struct rtl8169_private, task.work);
struct net_device *dev = tp->dev;
int i;
rtnl_lock();
if (!netif_running(dev))
goto out_unlock;
rtl8169_wait_for_quiescence(dev);
for (i = 0; i < NUM_RX_DESC; i++)
rtl8169_mark_to_asic(tp->RxDescArray + i, rx_buf_sz);
rtl8169_tx_clear(tp);
rtl8169_hw_reset(tp);
rtl_hw_start(dev);
netif_wake_queue(dev);
rtl8169_check_link_status(dev, tp, tp->mmio_addr);
out_unlock:
rtnl_unlock();
}
static void rtl8169_tx_timeout(struct net_device *dev)
{
struct rtl8169_private *tp = netdev_priv(dev);
rtl8169_hw_reset(tp);
/* Let's wait a bit while any (async) irq lands on */
rtl8169_schedule_work(dev, rtl8169_reset_task);
}
static int rtl8169_xmit_frags(struct rtl8169_private *tp, struct sk_buff *skb,
u32 *opts)
{
struct skb_shared_info *info = skb_shinfo(skb);
unsigned int cur_frag, entry;
struct TxDesc * uninitialized_var(txd);
struct device *d = &tp->pci_dev->dev;
entry = tp->cur_tx;
for (cur_frag = 0; cur_frag < info->nr_frags; cur_frag++) {
skb_frag_t *frag = info->frags + cur_frag;
dma_addr_t mapping;
u32 status, len;
void *addr;
entry = (entry + 1) % NUM_TX_DESC;
txd = tp->TxDescArray + entry;
len = frag->size;
addr = ((void *) page_address(frag->page)) + frag->page_offset;
mapping = dma_map_single(d, addr, len, DMA_TO_DEVICE);
if (unlikely(dma_mapping_error(d, mapping))) {
if (net_ratelimit())
netif_err(tp, drv, tp->dev,
"Failed to map TX fragments DMA!\n");
goto err_out;
}
/* Anti gcc 2.95.3 bugware (sic) */
status = opts[0] | len |
(RingEnd * !((entry + 1) % NUM_TX_DESC));
txd->opts1 = cpu_to_le32(status);
txd->opts2 = cpu_to_le32(opts[1]);
txd->addr = cpu_to_le64(mapping);
tp->tx_skb[entry].len = len;
}
if (cur_frag) {
tp->tx_skb[entry].skb = skb;
txd->opts1 |= cpu_to_le32(LastFrag);
}
return cur_frag;
err_out:
rtl8169_tx_clear_range(tp, tp->cur_tx + 1, cur_frag);
return -EIO;
}
static inline void rtl8169_tso_csum(struct rtl8169_private *tp,
struct sk_buff *skb, u32 *opts)
{
const struct rtl_tx_desc_info *info = tx_desc_info + tp->txd_version;
u32 mss = skb_shinfo(skb)->gso_size;
int offset = info->opts_offset;
if (mss) {
opts[0] |= TD_LSO;
opts[offset] |= min(mss, TD_MSS_MAX) << info->mss_shift;
} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
const struct iphdr *ip = ip_hdr(skb);
if (ip->protocol == IPPROTO_TCP)
opts[offset] |= info->checksum.tcp;
else if (ip->protocol == IPPROTO_UDP)
opts[offset] |= info->checksum.udp;
else
WARN_ON_ONCE(1);
}
}
static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb,
struct net_device *dev)
{
struct rtl8169_private *tp = netdev_priv(dev);
unsigned int entry = tp->cur_tx % NUM_TX_DESC;
struct TxDesc *txd = tp->TxDescArray + entry;
void __iomem *ioaddr = tp->mmio_addr;
struct device *d = &tp->pci_dev->dev;
dma_addr_t mapping;
u32 status, len;
u32 opts[2];
int frags;
if (unlikely(TX_BUFFS_AVAIL(tp) < skb_shinfo(skb)->nr_frags)) {
netif_err(tp, drv, dev, "BUG! Tx Ring full when queue awake!\n");
goto err_stop_0;
}
if (unlikely(le32_to_cpu(txd->opts1) & DescOwn))
goto err_stop_0;
len = skb_headlen(skb);
mapping = dma_map_single(d, skb->data, len, DMA_TO_DEVICE);
if (unlikely(dma_mapping_error(d, mapping))) {
if (net_ratelimit())
netif_err(tp, drv, dev, "Failed to map TX DMA!\n");
goto err_dma_0;
}
tp->tx_skb[entry].len = len;
txd->addr = cpu_to_le64(mapping);
opts[1] = cpu_to_le32(rtl8169_tx_vlan_tag(tp, skb));
opts[0] = DescOwn;
rtl8169_tso_csum(tp, skb, opts);
frags = rtl8169_xmit_frags(tp, skb, opts);
if (frags < 0)
goto err_dma_1;
else if (frags)
opts[0] |= FirstFrag;
else {
opts[0] |= FirstFrag | LastFrag;
tp->tx_skb[entry].skb = skb;
}
txd->opts2 = cpu_to_le32(opts[1]);
wmb();
/* Anti gcc 2.95.3 bugware (sic) */
status = opts[0] | len | (RingEnd * !((entry + 1) % NUM_TX_DESC));
txd->opts1 = cpu_to_le32(status);
tp->cur_tx += frags + 1;
wmb();
RTL_W8(TxPoll, NPQ);
if (TX_BUFFS_AVAIL(tp) < MAX_SKB_FRAGS) {
netif_stop_queue(dev);
smp_rmb();
if (TX_BUFFS_AVAIL(tp) >= MAX_SKB_FRAGS)
netif_wake_queue(dev);
}
return NETDEV_TX_OK;
err_dma_1:
rtl8169_unmap_tx_skb(d, tp->tx_skb + entry, txd);
err_dma_0:
dev_kfree_skb(skb);
dev->stats.tx_dropped++;
return NETDEV_TX_OK;
err_stop_0:
netif_stop_queue(dev);
dev->stats.tx_dropped++;
return NETDEV_TX_BUSY;
}
static void rtl8169_pcierr_interrupt(struct net_device *dev)
{
struct rtl8169_private *tp = netdev_priv(dev);
struct pci_dev *pdev = tp->pci_dev;
u16 pci_status, pci_cmd;
pci_read_config_word(pdev, PCI_COMMAND, &pci_cmd);
pci_read_config_word(pdev, PCI_STATUS, &pci_status);
netif_err(tp, intr, dev, "PCI error (cmd = 0x%04x, status = 0x%04x)\n",
pci_cmd, pci_status);
/*
* The recovery sequence below admits a very elaborated explanation:
* - it seems to work;
* - I did not see what else could be done;
* - it makes iop3xx happy.
*
* Feel free to adjust to your needs.
*/
if (pdev->broken_parity_status)
pci_cmd &= ~PCI_COMMAND_PARITY;
else
pci_cmd |= PCI_COMMAND_SERR | PCI_COMMAND_PARITY;
pci_write_config_word(pdev, PCI_COMMAND, pci_cmd);
pci_write_config_word(pdev, PCI_STATUS,
pci_status & (PCI_STATUS_DETECTED_PARITY |
PCI_STATUS_SIG_SYSTEM_ERROR | PCI_STATUS_REC_MASTER_ABORT |
PCI_STATUS_REC_TARGET_ABORT | PCI_STATUS_SIG_TARGET_ABORT));
/* The infamous DAC f*ckup only happens at boot time */
if ((tp->cp_cmd & PCIDAC) && !tp->dirty_rx && !tp->cur_rx) {
void __iomem *ioaddr = tp->mmio_addr;
netif_info(tp, intr, dev, "disabling PCI DAC\n");
tp->cp_cmd &= ~PCIDAC;
RTL_W16(CPlusCmd, tp->cp_cmd);
dev->features &= ~NETIF_F_HIGHDMA;
}
rtl8169_hw_reset(tp);
rtl8169_schedule_work(dev, rtl8169_reinit_task);
}
static void rtl8169_tx_interrupt(struct net_device *dev,
struct rtl8169_private *tp,
void __iomem *ioaddr)
{
unsigned int dirty_tx, tx_left;
dirty_tx = tp->dirty_tx;
smp_rmb();
tx_left = tp->cur_tx - dirty_tx;
while (tx_left > 0) {
unsigned int entry = dirty_tx % NUM_TX_DESC;
struct ring_info *tx_skb = tp->tx_skb + entry;
u32 status;
rmb();
status = le32_to_cpu(tp->TxDescArray[entry].opts1);
if (status & DescOwn)
break;
rtl8169_unmap_tx_skb(&tp->pci_dev->dev, tx_skb,
tp->TxDescArray + entry);
if (status & LastFrag) {
dev->stats.tx_packets++;
dev->stats.tx_bytes += tx_skb->skb->len;
dev_kfree_skb(tx_skb->skb);
tx_skb->skb = NULL;
}
dirty_tx++;
tx_left--;
}
if (tp->dirty_tx != dirty_tx) {
tp->dirty_tx = dirty_tx;
smp_wmb();
if (netif_queue_stopped(dev) &&
(TX_BUFFS_AVAIL(tp) >= MAX_SKB_FRAGS)) {
netif_wake_queue(dev);
}
/*
* 8168 hack: TxPoll requests are lost when the Tx packets are
* too close. Let's kick an extra TxPoll request when a burst
* of start_xmit activity is detected (if it is not detected,
* it is slow enough). -- FR
*/
smp_rmb();
if (tp->cur_tx != dirty_tx)
RTL_W8(TxPoll, NPQ);
}
}
static inline int rtl8169_fragmented_frame(u32 status)
{
return (status & (FirstFrag | LastFrag)) != (FirstFrag | LastFrag);
}
static inline void rtl8169_rx_csum(struct sk_buff *skb, u32 opts1)
{
u32 status = opts1 & RxProtoMask;
if (((status == RxProtoTCP) && !(opts1 & TCPFail)) ||
((status == RxProtoUDP) && !(opts1 & UDPFail)))
skb->ip_summed = CHECKSUM_UNNECESSARY;
else
skb_checksum_none_assert(skb);
}
static struct sk_buff *rtl8169_try_rx_copy(void *data,
struct rtl8169_private *tp,
int pkt_size,
dma_addr_t addr)
{
struct sk_buff *skb;
struct device *d = &tp->pci_dev->dev;
data = rtl8169_align(data);
dma_sync_single_for_cpu(d, addr, pkt_size, DMA_FROM_DEVICE);
prefetch(data);
skb = netdev_alloc_skb_ip_align(tp->dev, pkt_size);
if (skb)
memcpy(skb->data, data, pkt_size);
dma_sync_single_for_device(d, addr, pkt_size, DMA_FROM_DEVICE);
return skb;
}
static int rtl8169_rx_interrupt(struct net_device *dev,
struct rtl8169_private *tp,
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 06:41:36 +07:00
void __iomem *ioaddr, u32 budget)
{
unsigned int cur_rx, rx_left;
unsigned int count;
cur_rx = tp->cur_rx;
rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx;
rx_left = min(rx_left, budget);
for (; rx_left > 0; rx_left--, cur_rx++) {
unsigned int entry = cur_rx % NUM_RX_DESC;
struct RxDesc *desc = tp->RxDescArray + entry;
u32 status;
rmb();
status = le32_to_cpu(desc->opts1);
if (status & DescOwn)
break;
if (unlikely(status & RxRES)) {
netif_info(tp, rx_err, dev, "Rx ERROR. status = %08x\n",
status);
dev->stats.rx_errors++;
if (status & (RxRWT | RxRUNT))
dev->stats.rx_length_errors++;
if (status & RxCRC)
dev->stats.rx_crc_errors++;
if (status & RxFOVF) {
rtl8169_schedule_work(dev, rtl8169_reset_task);
dev->stats.rx_fifo_errors++;
}
rtl8169_mark_to_asic(desc, rx_buf_sz);
} else {
struct sk_buff *skb;
dma_addr_t addr = le64_to_cpu(desc->addr);
int pkt_size = (status & 0x00001FFF) - 4;
/*
* The driver does not support incoming fragmented
* frames. They are seen as a symptom of over-mtu
* sized frames.
*/
if (unlikely(rtl8169_fragmented_frame(status))) {
dev->stats.rx_dropped++;
dev->stats.rx_length_errors++;
rtl8169_mark_to_asic(desc, rx_buf_sz);
continue;
}
skb = rtl8169_try_rx_copy(tp->Rx_databuff[entry],
tp, pkt_size, addr);
rtl8169_mark_to_asic(desc, rx_buf_sz);
if (!skb) {
dev->stats.rx_dropped++;
continue;
}
rtl8169_rx_csum(skb, status);
skb_put(skb, pkt_size);
skb->protocol = eth_type_trans(skb, dev);
rtl8169_rx_vlan_tag(desc, skb);
napi_gro_receive(&tp->napi, skb);
dev->stats.rx_bytes += pkt_size;
dev->stats.rx_packets++;
}
/* Work around for AMD plateform. */
if ((desc->opts2 & cpu_to_le32(0xfffe000)) &&
(tp->mac_version == RTL_GIGA_MAC_VER_05)) {
desc->opts2 = 0;
cur_rx++;
}
}
count = cur_rx - tp->cur_rx;
tp->cur_rx = cur_rx;
tp->dirty_rx += count;
return count;
}
static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance)
{
struct net_device *dev = dev_instance;
struct rtl8169_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
int handled = 0;
int status;
/* loop handling interrupts until we have no new ones or
* we hit a invalid/hotplug case.
*/
status = RTL_R16(IntrStatus);
while (status && status != 0xffff) {
handled = 1;
/* Handle all of the error cases first. These will reset
* the chip, so just exit the loop.
*/
if (unlikely(!netif_running(dev))) {
rtl8169_hw_reset(tp);
break;
}
if (unlikely(status & RxFIFOOver)) {
switch (tp->mac_version) {
/* Work around for rx fifo overflow */
case RTL_GIGA_MAC_VER_11:
case RTL_GIGA_MAC_VER_22:
case RTL_GIGA_MAC_VER_26:
netif_stop_queue(dev);
rtl8169_tx_timeout(dev);
goto done;
/* Testers needed. */
case RTL_GIGA_MAC_VER_17:
case RTL_GIGA_MAC_VER_19:
case RTL_GIGA_MAC_VER_20:
case RTL_GIGA_MAC_VER_21:
case RTL_GIGA_MAC_VER_23:
case RTL_GIGA_MAC_VER_24:
case RTL_GIGA_MAC_VER_27:
case RTL_GIGA_MAC_VER_28:
case RTL_GIGA_MAC_VER_31:
/* Experimental science. Pktgen proof. */
case RTL_GIGA_MAC_VER_12:
case RTL_GIGA_MAC_VER_25:
if (status == RxFIFOOver)
goto done;
break;
default:
break;
}
}
if (unlikely(status & SYSErr)) {
rtl8169_pcierr_interrupt(dev);
break;
}
if (status & LinkChg)
__rtl8169_check_link_status(dev, tp, ioaddr, true);
/* We need to see the lastest version of tp->intr_mask to
* avoid ignoring an MSI interrupt and having to wait for
* another event which may never come.
*/
smp_rmb();
if (status & tp->intr_mask & tp->napi_event) {
RTL_W16(IntrMask, tp->intr_event & ~tp->napi_event);
tp->intr_mask = ~tp->napi_event;
if (likely(napi_schedule_prep(&tp->napi)))
__napi_schedule(&tp->napi);
else
netif_info(tp, intr, dev,
"interrupt %04x in poll\n", status);
}
/* We only get a new MSI interrupt when all active irq
* sources on the chip have been acknowledged. So, ack
* everything we've seen and check if new sources have become
* active to avoid blocking all interrupts from the chip.
*/
RTL_W16(IntrStatus,
(status & RxFIFOOver) ? (status | RxOverflow) : status);
status = RTL_R16(IntrStatus);
}
done:
return IRQ_RETVAL(handled);
}
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 06:41:36 +07:00
static int rtl8169_poll(struct napi_struct *napi, int budget)
{
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 06:41:36 +07:00
struct rtl8169_private *tp = container_of(napi, struct rtl8169_private, napi);
struct net_device *dev = tp->dev;
void __iomem *ioaddr = tp->mmio_addr;
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 06:41:36 +07:00
int work_done;
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 06:41:36 +07:00
work_done = rtl8169_rx_interrupt(dev, tp, ioaddr, (u32) budget);
rtl8169_tx_interrupt(dev, tp, ioaddr);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 06:41:36 +07:00
if (work_done < budget) {
napi_complete(napi);
/* We need for force the visibility of tp->intr_mask
* for other CPUs, as we can loose an MSI interrupt
* and potentially wait for a retransmit timeout if we don't.
* The posted write to IntrMask is safe, as it will
* eventually make it to the chip and we won't loose anything
* until it does.
*/
tp->intr_mask = 0xffff;
wmb();
RTL_W16(IntrMask, tp->intr_event);
}
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 06:41:36 +07:00
return work_done;
}
static void rtl8169_rx_missed(struct net_device *dev, void __iomem *ioaddr)
{
struct rtl8169_private *tp = netdev_priv(dev);
if (tp->mac_version > RTL_GIGA_MAC_VER_06)
return;
dev->stats.rx_missed_errors += (RTL_R32(RxMissed) & 0xffffff);
RTL_W32(RxMissed, 0);
}
static void rtl8169_down(struct net_device *dev)
{
struct rtl8169_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
del_timer_sync(&tp->timer);
netif_stop_queue(dev);
napi_disable(&tp->napi);
spin_lock_irq(&tp->lock);
rtl8169_hw_reset(tp);
/*
* At this point device interrupts can not be enabled in any function,
* as netif_running is not true (rtl8169_interrupt, rtl8169_reset_task,
* rtl8169_reinit_task) and napi is disabled (rtl8169_poll).
*/
rtl8169_rx_missed(dev, ioaddr);
spin_unlock_irq(&tp->lock);
synchronize_irq(dev->irq);
/* Give a racing hard_start_xmit a few cycles to complete. */
synchronize_sched(); /* FIXME: should this be synchronize_irq()? */
rtl8169_tx_clear(tp);
rtl8169_rx_clear(tp);
rtl_pll_power_down(tp);
}
static int rtl8169_close(struct net_device *dev)
{
struct rtl8169_private *tp = netdev_priv(dev);
struct pci_dev *pdev = tp->pci_dev;
pm_runtime_get_sync(&pdev->dev);
/* Update counters before going down */
rtl8169_update_counters(dev);
rtl8169_down(dev);
free_irq(dev->irq, dev);
dma_free_coherent(&pdev->dev, R8169_RX_RING_BYTES, tp->RxDescArray,
tp->RxPhyAddr);
dma_free_coherent(&pdev->dev, R8169_TX_RING_BYTES, tp->TxDescArray,
tp->TxPhyAddr);
tp->TxDescArray = NULL;
tp->RxDescArray = NULL;
pm_runtime_put_sync(&pdev->dev);
return 0;
}
static void rtl_set_rx_mode(struct net_device *dev)
{
struct rtl8169_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
unsigned long flags;
u32 mc_filter[2]; /* Multicast hash filter */
int rx_mode;
u32 tmp = 0;
if (dev->flags & IFF_PROMISC) {
/* Unconditionally log net taps. */
netif_notice(tp, link, dev, "Promiscuous mode enabled\n");
rx_mode =
AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
AcceptAllPhys;
mc_filter[1] = mc_filter[0] = 0xffffffff;
} else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
(dev->flags & IFF_ALLMULTI)) {
/* Too many to filter perfectly -- accept all multicasts. */
rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
mc_filter[1] = mc_filter[0] = 0xffffffff;
} else {
struct netdev_hw_addr *ha;
rx_mode = AcceptBroadcast | AcceptMyPhys;
mc_filter[1] = mc_filter[0] = 0;
netdev_for_each_mc_addr(ha, dev) {
int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26;
mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
rx_mode |= AcceptMulticast;
}
}
spin_lock_irqsave(&tp->lock, flags);
tmp = (RTL_R32(RxConfig) & ~RX_CONFIG_ACCEPT_MASK) | rx_mode;
if (tp->mac_version > RTL_GIGA_MAC_VER_06) {
u32 data = mc_filter[0];
mc_filter[0] = swab32(mc_filter[1]);
mc_filter[1] = swab32(data);
r8169: sync with vendor's driver - add several PCI ID for the PCI-E adapters ; - new identification strings ; - the RTL_GIGA_MAC_VER_ defines have been renamed to closely match the out-of-tree driver. It makes the comparison less hairy ; - various magic ; - the PCI region for the device with PCI ID 0x8136 is guessed. Explanation: the in-kernel Linux driver is written to allow MM register accesses and avoid the IO tax. The relevant BAR register was found at base address 1 for the plain-old PCI 8169. User reported lspci show that it is found at base address 2 for the new Gigabit PCI-E 816{8/9}. Typically: 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.: Unknown device 8168 (rev 01) Subsystem: Unknown device 1631:e015 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 20 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at b800 [size=256] Region 2: Memory at ff7ff000 (64-bit, non-prefetchable) [size=4K] ^^^^^^^^ So far I have not received any lspci report for the 0x8136 and Realtek's driver do not help: be it under BSD or Linux, their r1000 driver include a USE_IO_SPACE #define but the bar address is always hardcoded to 1 in the MM case. :o/ - the 8168 has been reported to require an extra alignment for its receive buffers. The status of the 8167 and 8136 is not known in this regard. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-07-27 04:14:13 +07:00
}
RTL_W32(MAR0 + 4, mc_filter[1]);
RTL_W32(MAR0 + 0, mc_filter[0]);
RTL_W32(RxConfig, tmp);
spin_unlock_irqrestore(&tp->lock, flags);
}
/**
* rtl8169_get_stats - Get rtl8169 read/write statistics
* @dev: The Ethernet Device to get statistics for
*
* Get TX/RX statistics for rtl8169
*/
static struct net_device_stats *rtl8169_get_stats(struct net_device *dev)
{
struct rtl8169_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
unsigned long flags;
if (netif_running(dev)) {
spin_lock_irqsave(&tp->lock, flags);
rtl8169_rx_missed(dev, ioaddr);
spin_unlock_irqrestore(&tp->lock, flags);
}
return &dev->stats;
}
static void rtl8169_net_suspend(struct net_device *dev)
{
struct rtl8169_private *tp = netdev_priv(dev);
if (!netif_running(dev))
return;
rtl_pll_power_down(tp);
netif_device_detach(dev);
netif_stop_queue(dev);
}
#ifdef CONFIG_PM
static int rtl8169_suspend(struct device *device)
{
struct pci_dev *pdev = to_pci_dev(device);
struct net_device *dev = pci_get_drvdata(pdev);
rtl8169_net_suspend(dev);
return 0;
}
static void __rtl8169_resume(struct net_device *dev)
{
struct rtl8169_private *tp = netdev_priv(dev);
netif_device_attach(dev);
rtl_pll_power_up(tp);
rtl8169_schedule_work(dev, rtl8169_reset_task);
}
static int rtl8169_resume(struct device *device)
{
struct pci_dev *pdev = to_pci_dev(device);
struct net_device *dev = pci_get_drvdata(pdev);
struct rtl8169_private *tp = netdev_priv(dev);
rtl8169_init_phy(dev, tp);
if (netif_running(dev))
__rtl8169_resume(dev);
return 0;
}
static int rtl8169_runtime_suspend(struct device *device)
{
struct pci_dev *pdev = to_pci_dev(device);
struct net_device *dev = pci_get_drvdata(pdev);
struct rtl8169_private *tp = netdev_priv(dev);
if (!tp->TxDescArray)
return 0;
spin_lock_irq(&tp->lock);
tp->saved_wolopts = __rtl8169_get_wol(tp);
__rtl8169_set_wol(tp, WAKE_ANY);
spin_unlock_irq(&tp->lock);
rtl8169_net_suspend(dev);
return 0;
}
static int rtl8169_runtime_resume(struct device *device)
{
struct pci_dev *pdev = to_pci_dev(device);
struct net_device *dev = pci_get_drvdata(pdev);
struct rtl8169_private *tp = netdev_priv(dev);
if (!tp->TxDescArray)
return 0;
spin_lock_irq(&tp->lock);
__rtl8169_set_wol(tp, tp->saved_wolopts);
tp->saved_wolopts = 0;
spin_unlock_irq(&tp->lock);
rtl8169_init_phy(dev, tp);
__rtl8169_resume(dev);
return 0;
}
static int rtl8169_runtime_idle(struct device *device)
{
struct pci_dev *pdev = to_pci_dev(device);
struct net_device *dev = pci_get_drvdata(pdev);
struct rtl8169_private *tp = netdev_priv(dev);
return tp->TxDescArray ? -EBUSY : 0;
}
static const struct dev_pm_ops rtl8169_pm_ops = {
.suspend = rtl8169_suspend,
.resume = rtl8169_resume,
.freeze = rtl8169_suspend,
.thaw = rtl8169_resume,
.poweroff = rtl8169_suspend,
.restore = rtl8169_resume,
.runtime_suspend = rtl8169_runtime_suspend,
.runtime_resume = rtl8169_runtime_resume,
.runtime_idle = rtl8169_runtime_idle,
};
#define RTL8169_PM_OPS (&rtl8169_pm_ops)
#else /* !CONFIG_PM */
#define RTL8169_PM_OPS NULL
#endif /* !CONFIG_PM */
static void rtl_shutdown(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct rtl8169_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
rtl8169_net_suspend(dev);
/* Restore original MAC address */
rtl_rar_set(tp, dev->perm_addr);
spin_lock_irq(&tp->lock);
rtl8169_hw_reset(tp);
spin_unlock_irq(&tp->lock);
if (system_state == SYSTEM_POWER_OFF) {
/* WoL fails with 8168b when the receiver is disabled. */
if ((tp->mac_version == RTL_GIGA_MAC_VER_11 ||
tp->mac_version == RTL_GIGA_MAC_VER_12 ||
tp->mac_version == RTL_GIGA_MAC_VER_17) &&
(tp->features & RTL_FEATURE_WOL)) {
pci_clear_master(pdev);
RTL_W8(ChipCmd, CmdRxEnb);
/* PCI commit */
RTL_R8(ChipCmd);
}
pci_wake_from_d3(pdev, true);
pci_set_power_state(pdev, PCI_D3hot);
}
}
static struct pci_driver rtl8169_pci_driver = {
.name = MODULENAME,
.id_table = rtl8169_pci_tbl,
.probe = rtl8169_init_one,
.remove = __devexit_p(rtl8169_remove_one),
.shutdown = rtl_shutdown,
.driver.pm = RTL8169_PM_OPS,
};
static int __init rtl8169_init_module(void)
{
return pci_register_driver(&rtl8169_pci_driver);
}
static void __exit rtl8169_cleanup_module(void)
{
pci_unregister_driver(&rtl8169_pci_driver);
}
module_init(rtl8169_init_module);
module_exit(rtl8169_cleanup_module);