linux_dsm_epyc7002/drivers/video/fbdev/omap/sossi.c

681 lines
15 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* OMAP1 Special OptimiSed Screen Interface support
*
* Copyright (C) 2004-2005 Nokia Corporation
* Author: Juha Yrjölä <juha.yrjola@nokia.com>
*/
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/clk.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/interrupt.h>
ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h Based on earlier discussions[1] we attempted to find a suitable location for the omap DMA header in commit 2b6c4e73 (ARM: OMAP: DMA: Move plat/dma.h to plat-omap/dma-omap.h) until the conversion to dmaengine is complete. Unfortunately that was before I was able to try to test compile of the ARM multiplatform builds for omap2+, and the end result was not very good. So I'm creating yet another all over the place patch to cut the last dependency for building omap2+ for ARM multiplatform. After this, we have finally removed the driver dependencies to the arch/arm code, except for few drivers that are being worked on. The other option was to make the <plat-omap/dma-omap.h> path to work, but we'd have to add some new header directory to for multiplatform builds. Or we would have to manually include arch/arm/plat-omap/include again from arch/arm/Makefile for omap2+. Neither of these alternatives sound appealing as they will likely lead addition of various other headers exposed to the drivers, which we want to avoid for the multiplatform kernels. Since we already have a minimal include/linux/omap-dma.h, let's just use that instead and add a note to it to not use the custom omap DMA functions any longer where possible. Note that converting omap DMA to dmaengine depends on dmaengine supporting automatically incrementing the FIFO address at the device end, and converting all the remaining legacy drivers. So it's going to be few more merge windows. [1] https://patchwork.kernel.org/patch/1519591/# cc: Russell King <linux@arm.linux.org.uk> cc: Kevin Hilman <khilman@ti.com> cc: "Benoît Cousson" <b-cousson@ti.com> cc: Herbert Xu <herbert@gondor.apana.org.au> cc: "David S. Miller" <davem@davemloft.net> cc: Vinod Koul <vinod.koul@intel.com> cc: Dan Williams <djbw@fb.com> cc: Mauro Carvalho Chehab <mchehab@infradead.org> cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> cc: David Woodhouse <dwmw2@infradead.org> cc: Kyungmin Park <kyungmin.park@samsung.com> cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: Tomi Valkeinen <tomi.valkeinen@ti.com> cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> cc: Hans Verkuil <hans.verkuil@cisco.com> cc: Vaibhav Hiremath <hvaibhav@ti.com> cc: Lokesh Vutla <lokeshvutla@ti.com> cc: Rusty Russell <rusty@rustcorp.com.au> cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> cc: Afzal Mohammed <afzal@ti.com> cc: linux-crypto@vger.kernel.org cc: linux-media@vger.kernel.org cc: linux-mtd@lists.infradead.org cc: linux-usb@vger.kernel.org cc: linux-fbdev@vger.kernel.org Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-11-30 23:41:50 +07:00
#include <linux/omap-dma.h>
#include "omapfb.h"
#include "lcdc.h"
#define MODULE_NAME "omapfb-sossi"
#define OMAP_SOSSI_BASE 0xfffbac00
#define SOSSI_ID_REG 0x00
#define SOSSI_INIT1_REG 0x04
#define SOSSI_INIT2_REG 0x08
#define SOSSI_INIT3_REG 0x0c
#define SOSSI_FIFO_REG 0x10
#define SOSSI_REOTABLE_REG 0x14
#define SOSSI_TEARING_REG 0x18
#define SOSSI_INIT1B_REG 0x1c
#define SOSSI_FIFOB_REG 0x20
#define DMA_GSCR 0xfffedc04
#define DMA_LCD_CCR 0xfffee3c2
#define DMA_LCD_CTRL 0xfffee3c4
#define DMA_LCD_LCH_CTRL 0xfffee3ea
#define CONF_SOSSI_RESET_R (1 << 23)
#define RD_ACCESS 0
#define WR_ACCESS 1
#define SOSSI_MAX_XMIT_BYTES (512 * 1024)
static struct {
void __iomem *base;
struct clk *fck;
unsigned long fck_hz;
spinlock_t lock;
int bus_pick_count;
int bus_pick_width;
int tearsync_mode;
int tearsync_line;
void (*lcdc_callback)(void *data);
void *lcdc_callback_data;
int vsync_dma_pending;
/* timing for read and write access */
int clk_div;
u8 clk_tw0[2];
u8 clk_tw1[2];
/*
* if last_access is the same as current we don't have to change
* the timings
*/
int last_access;
struct omapfb_device *fbdev;
} sossi;
static inline u32 sossi_read_reg(int reg)
{
return readl(sossi.base + reg);
}
static inline u16 sossi_read_reg16(int reg)
{
return readw(sossi.base + reg);
}
static inline u8 sossi_read_reg8(int reg)
{
return readb(sossi.base + reg);
}
static inline void sossi_write_reg(int reg, u32 value)
{
writel(value, sossi.base + reg);
}
static inline void sossi_write_reg16(int reg, u16 value)
{
writew(value, sossi.base + reg);
}
static inline void sossi_write_reg8(int reg, u8 value)
{
writeb(value, sossi.base + reg);
}
static void sossi_set_bits(int reg, u32 bits)
{
sossi_write_reg(reg, sossi_read_reg(reg) | bits);
}
static void sossi_clear_bits(int reg, u32 bits)
{
sossi_write_reg(reg, sossi_read_reg(reg) & ~bits);
}
#define HZ_TO_PS(x) (1000000000 / (x / 1000))
static u32 ps_to_sossi_ticks(u32 ps, int div)
{
u32 clk_period = HZ_TO_PS(sossi.fck_hz) * div;
return (clk_period + ps - 1) / clk_period;
}
static int calc_rd_timings(struct extif_timings *t)
{
u32 tw0, tw1;
int reon, reoff, recyc, actim;
int div = t->clk_div;
/*
* Make sure that after conversion it still holds that:
* reoff > reon, recyc >= reoff, actim > reon
*/
reon = ps_to_sossi_ticks(t->re_on_time, div);
/* reon will be exactly one sossi tick */
if (reon > 1)
return -1;
reoff = ps_to_sossi_ticks(t->re_off_time, div);
if (reoff <= reon)
reoff = reon + 1;
tw0 = reoff - reon;
if (tw0 > 0x10)
return -1;
recyc = ps_to_sossi_ticks(t->re_cycle_time, div);
if (recyc <= reoff)
recyc = reoff + 1;
tw1 = recyc - tw0;
/* values less then 3 result in the SOSSI block resetting itself */
if (tw1 < 3)
tw1 = 3;
if (tw1 > 0x40)
return -1;
actim = ps_to_sossi_ticks(t->access_time, div);
if (actim < reoff)
actim++;
/*
* access time (data hold time) will be exactly one sossi
* tick
*/
if (actim - reoff > 1)
return -1;
t->tim[0] = tw0 - 1;
t->tim[1] = tw1 - 1;
return 0;
}
static int calc_wr_timings(struct extif_timings *t)
{
u32 tw0, tw1;
int weon, weoff, wecyc;
int div = t->clk_div;
/*
* Make sure that after conversion it still holds that:
* weoff > weon, wecyc >= weoff
*/
weon = ps_to_sossi_ticks(t->we_on_time, div);
/* weon will be exactly one sossi tick */
if (weon > 1)
return -1;
weoff = ps_to_sossi_ticks(t->we_off_time, div);
if (weoff <= weon)
weoff = weon + 1;
tw0 = weoff - weon;
if (tw0 > 0x10)
return -1;
wecyc = ps_to_sossi_ticks(t->we_cycle_time, div);
if (wecyc <= weoff)
wecyc = weoff + 1;
tw1 = wecyc - tw0;
/* values less then 3 result in the SOSSI block resetting itself */
if (tw1 < 3)
tw1 = 3;
if (tw1 > 0x40)
return -1;
t->tim[2] = tw0 - 1;
t->tim[3] = tw1 - 1;
return 0;
}
static void _set_timing(int div, int tw0, int tw1)
{
u32 l;
#ifdef VERBOSE
dev_dbg(sossi.fbdev->dev, "Using TW0 = %d, TW1 = %d, div = %d\n",
tw0 + 1, tw1 + 1, div);
#endif
clk_set_rate(sossi.fck, sossi.fck_hz / div);
clk_enable(sossi.fck);
l = sossi_read_reg(SOSSI_INIT1_REG);
l &= ~((0x0f << 20) | (0x3f << 24));
l |= (tw0 << 20) | (tw1 << 24);
sossi_write_reg(SOSSI_INIT1_REG, l);
clk_disable(sossi.fck);
}
static void _set_bits_per_cycle(int bus_pick_count, int bus_pick_width)
{
u32 l;
l = sossi_read_reg(SOSSI_INIT3_REG);
l &= ~0x3ff;
l |= ((bus_pick_count - 1) << 5) | ((bus_pick_width - 1) & 0x1f);
sossi_write_reg(SOSSI_INIT3_REG, l);
}
static void _set_tearsync_mode(int mode, unsigned line)
{
u32 l;
l = sossi_read_reg(SOSSI_TEARING_REG);
l &= ~(((1 << 11) - 1) << 15);
l |= line << 15;
l &= ~(0x3 << 26);
l |= mode << 26;
sossi_write_reg(SOSSI_TEARING_REG, l);
if (mode)
sossi_set_bits(SOSSI_INIT2_REG, 1 << 6); /* TE logic */
else
sossi_clear_bits(SOSSI_INIT2_REG, 1 << 6);
}
static inline void set_timing(int access)
{
if (access != sossi.last_access) {
sossi.last_access = access;
_set_timing(sossi.clk_div,
sossi.clk_tw0[access], sossi.clk_tw1[access]);
}
}
static void sossi_start_transfer(void)
{
/* WE */
sossi_clear_bits(SOSSI_INIT2_REG, 1 << 4);
/* CS active low */
sossi_clear_bits(SOSSI_INIT1_REG, 1 << 30);
}
static void sossi_stop_transfer(void)
{
/* WE */
sossi_set_bits(SOSSI_INIT2_REG, 1 << 4);
/* CS active low */
sossi_set_bits(SOSSI_INIT1_REG, 1 << 30);
}
static void wait_end_of_write(void)
{
/* Before reading we must check if some writings are going on */
while (!(sossi_read_reg(SOSSI_INIT2_REG) & (1 << 3)));
}
static void send_data(const void *data, unsigned int len)
{
while (len >= 4) {
sossi_write_reg(SOSSI_FIFO_REG, *(const u32 *) data);
len -= 4;
data += 4;
}
while (len >= 2) {
sossi_write_reg16(SOSSI_FIFO_REG, *(const u16 *) data);
len -= 2;
data += 2;
}
while (len) {
sossi_write_reg8(SOSSI_FIFO_REG, *(const u8 *) data);
len--;
data++;
}
}
static void set_cycles(unsigned int len)
{
unsigned long nr_cycles = len / (sossi.bus_pick_width / 8);
BUG_ON((nr_cycles - 1) & ~0x3ffff);
sossi_clear_bits(SOSSI_INIT1_REG, 0x3ffff);
sossi_set_bits(SOSSI_INIT1_REG, (nr_cycles - 1) & 0x3ffff);
}
static int sossi_convert_timings(struct extif_timings *t)
{
int r = 0;
int div = t->clk_div;
t->converted = 0;
if (div <= 0 || div > 8)
return -1;
/* no CS on SOSSI, so ignore cson, csoff, cs_pulsewidth */
if ((r = calc_rd_timings(t)) < 0)
return r;
if ((r = calc_wr_timings(t)) < 0)
return r;
t->tim[4] = div;
t->converted = 1;
return 0;
}
static void sossi_set_timings(const struct extif_timings *t)
{
BUG_ON(!t->converted);
sossi.clk_tw0[RD_ACCESS] = t->tim[0];
sossi.clk_tw1[RD_ACCESS] = t->tim[1];
sossi.clk_tw0[WR_ACCESS] = t->tim[2];
sossi.clk_tw1[WR_ACCESS] = t->tim[3];
sossi.clk_div = t->tim[4];
}
static void sossi_get_clk_info(u32 *clk_period, u32 *max_clk_div)
{
*clk_period = HZ_TO_PS(sossi.fck_hz);
*max_clk_div = 8;
}
static void sossi_set_bits_per_cycle(int bpc)
{
int bus_pick_count, bus_pick_width;
/*
* We set explicitly the the bus_pick_count as well, although
* with remapping/reordering disabled it will be calculated by HW
* as (32 / bus_pick_width).
*/
switch (bpc) {
case 8:
bus_pick_count = 4;
bus_pick_width = 8;
break;
case 16:
bus_pick_count = 2;
bus_pick_width = 16;
break;
default:
BUG();
return;
}
sossi.bus_pick_width = bus_pick_width;
sossi.bus_pick_count = bus_pick_count;
}
static int sossi_setup_tearsync(unsigned pin_cnt,
unsigned hs_pulse_time, unsigned vs_pulse_time,
int hs_pol_inv, int vs_pol_inv, int div)
{
int hs, vs;
u32 l;
if (pin_cnt != 1 || div < 1 || div > 8)
return -EINVAL;
hs = ps_to_sossi_ticks(hs_pulse_time, div);
vs = ps_to_sossi_ticks(vs_pulse_time, div);
if (vs < 8 || vs <= hs || vs >= (1 << 12))
return -EDOM;
vs /= 8;
vs--;
if (hs > 8)
hs = 8;
if (hs)
hs--;
dev_dbg(sossi.fbdev->dev,
"setup_tearsync: hs %d vs %d hs_inv %d vs_inv %d\n",
hs, vs, hs_pol_inv, vs_pol_inv);
clk_enable(sossi.fck);
l = sossi_read_reg(SOSSI_TEARING_REG);
l &= ~((1 << 15) - 1);
l |= vs << 3;
l |= hs;
if (hs_pol_inv)
l |= 1 << 29;
else
l &= ~(1 << 29);
if (vs_pol_inv)
l |= 1 << 28;
else
l &= ~(1 << 28);
sossi_write_reg(SOSSI_TEARING_REG, l);
clk_disable(sossi.fck);
return 0;
}
static int sossi_enable_tearsync(int enable, unsigned line)
{
int mode;
dev_dbg(sossi.fbdev->dev, "tearsync %d line %d\n", enable, line);
if (line >= 1 << 11)
return -EINVAL;
if (enable) {
if (line)
mode = 2; /* HS or VS */
else
mode = 3; /* VS only */
} else
mode = 0;
sossi.tearsync_line = line;
sossi.tearsync_mode = mode;
return 0;
}
static void sossi_write_command(const void *data, unsigned int len)
{
clk_enable(sossi.fck);
set_timing(WR_ACCESS);
_set_bits_per_cycle(sossi.bus_pick_count, sossi.bus_pick_width);
/* CMD#/DATA */
sossi_clear_bits(SOSSI_INIT1_REG, 1 << 18);
set_cycles(len);
sossi_start_transfer();
send_data(data, len);
sossi_stop_transfer();
wait_end_of_write();
clk_disable(sossi.fck);
}
static void sossi_write_data(const void *data, unsigned int len)
{
clk_enable(sossi.fck);
set_timing(WR_ACCESS);
_set_bits_per_cycle(sossi.bus_pick_count, sossi.bus_pick_width);
/* CMD#/DATA */
sossi_set_bits(SOSSI_INIT1_REG, 1 << 18);
set_cycles(len);
sossi_start_transfer();
send_data(data, len);
sossi_stop_transfer();
wait_end_of_write();
clk_disable(sossi.fck);
}
static void sossi_transfer_area(int width, int height,
void (callback)(void *data), void *data)
{
BUG_ON(callback == NULL);
sossi.lcdc_callback = callback;
sossi.lcdc_callback_data = data;
clk_enable(sossi.fck);
set_timing(WR_ACCESS);
_set_bits_per_cycle(sossi.bus_pick_count, sossi.bus_pick_width);
_set_tearsync_mode(sossi.tearsync_mode, sossi.tearsync_line);
/* CMD#/DATA */
sossi_set_bits(SOSSI_INIT1_REG, 1 << 18);
set_cycles(width * height * sossi.bus_pick_width / 8);
sossi_start_transfer();
if (sossi.tearsync_mode) {
/*
* Wait for the sync signal and start the transfer only
* then. We can't seem to be able to use HW sync DMA for
* this since LCD DMA shows huge latencies, as if it
* would ignore some of the DMA requests from SoSSI.
*/
unsigned long flags;
spin_lock_irqsave(&sossi.lock, flags);
sossi.vsync_dma_pending++;
spin_unlock_irqrestore(&sossi.lock, flags);
} else
/* Just start the transfer right away. */
omap_enable_lcd_dma();
}
static void sossi_dma_callback(void *data)
{
omap_stop_lcd_dma();
sossi_stop_transfer();
clk_disable(sossi.fck);
sossi.lcdc_callback(sossi.lcdc_callback_data);
}
static void sossi_read_data(void *data, unsigned int len)
{
clk_enable(sossi.fck);
set_timing(RD_ACCESS);
_set_bits_per_cycle(sossi.bus_pick_count, sossi.bus_pick_width);
/* CMD#/DATA */
sossi_set_bits(SOSSI_INIT1_REG, 1 << 18);
set_cycles(len);
sossi_start_transfer();
while (len >= 4) {
*(u32 *) data = sossi_read_reg(SOSSI_FIFO_REG);
len -= 4;
data += 4;
}
while (len >= 2) {
*(u16 *) data = sossi_read_reg16(SOSSI_FIFO_REG);
len -= 2;
data += 2;
}
while (len) {
*(u8 *) data = sossi_read_reg8(SOSSI_FIFO_REG);
len--;
data++;
}
sossi_stop_transfer();
clk_disable(sossi.fck);
}
static irqreturn_t sossi_match_irq(int irq, void *data)
{
unsigned long flags;
spin_lock_irqsave(&sossi.lock, flags);
if (sossi.vsync_dma_pending) {
sossi.vsync_dma_pending--;
omap_enable_lcd_dma();
}
spin_unlock_irqrestore(&sossi.lock, flags);
return IRQ_HANDLED;
}
static int sossi_init(struct omapfb_device *fbdev)
{
u32 l, k;
struct clk *fck;
struct clk *dpll1out_ck;
int r;
sossi.base = ioremap(OMAP_SOSSI_BASE, SZ_1K);
if (!sossi.base) {
dev_err(fbdev->dev, "can't ioremap SoSSI\n");
return -ENOMEM;
}
sossi.fbdev = fbdev;
spin_lock_init(&sossi.lock);
dpll1out_ck = clk_get(fbdev->dev, "ck_dpll1out");
if (IS_ERR(dpll1out_ck)) {
dev_err(fbdev->dev, "can't get DPLL1OUT clock\n");
return PTR_ERR(dpll1out_ck);
}
/*
* We need the parent clock rate, which we might divide further
* depending on the timing requirements of the controller. See
* _set_timings.
*/
sossi.fck_hz = clk_get_rate(dpll1out_ck);
clk_put(dpll1out_ck);
fck = clk_get(fbdev->dev, "ck_sossi");
if (IS_ERR(fck)) {
dev_err(fbdev->dev, "can't get SoSSI functional clock\n");
return PTR_ERR(fck);
}
sossi.fck = fck;
/* Reset and enable the SoSSI module */
l = omap_readl(MOD_CONF_CTRL_1);
l |= CONF_SOSSI_RESET_R;
omap_writel(l, MOD_CONF_CTRL_1);
l &= ~CONF_SOSSI_RESET_R;
omap_writel(l, MOD_CONF_CTRL_1);
clk_enable(sossi.fck);
l = omap_readl(ARM_IDLECT2);
l &= ~(1 << 8); /* DMACK_REQ */
omap_writel(l, ARM_IDLECT2);
l = sossi_read_reg(SOSSI_INIT2_REG);
/* Enable and reset the SoSSI block */
l |= (1 << 0) | (1 << 1);
sossi_write_reg(SOSSI_INIT2_REG, l);
/* Take SoSSI out of reset */
l &= ~(1 << 1);
sossi_write_reg(SOSSI_INIT2_REG, l);
sossi_write_reg(SOSSI_ID_REG, 0);
l = sossi_read_reg(SOSSI_ID_REG);
k = sossi_read_reg(SOSSI_ID_REG);
if (l != 0x55555555 || k != 0xaaaaaaaa) {
dev_err(fbdev->dev,
"invalid SoSSI sync pattern: %08x, %08x\n", l, k);
r = -ENODEV;
goto err;
}
if ((r = omap_lcdc_set_dma_callback(sossi_dma_callback, NULL)) < 0) {
dev_err(fbdev->dev, "can't get LCDC IRQ\n");
r = -ENODEV;
goto err;
}
l = sossi_read_reg(SOSSI_ID_REG); /* Component code */
l = sossi_read_reg(SOSSI_ID_REG);
dev_info(fbdev->dev, "SoSSI version %d.%d initialized\n",
l >> 16, l & 0xffff);
l = sossi_read_reg(SOSSI_INIT1_REG);
l |= (1 << 19); /* DMA_MODE */
l &= ~(1 << 31); /* REORDERING */
sossi_write_reg(SOSSI_INIT1_REG, l);
if ((r = request_irq(INT_1610_SoSSI_MATCH, sossi_match_irq,
IRQ_TYPE_EDGE_FALLING,
"sossi_match", sossi.fbdev->dev)) < 0) {
dev_err(sossi.fbdev->dev, "can't get SoSSI match IRQ\n");
goto err;
}
clk_disable(sossi.fck);
return 0;
err:
clk_disable(sossi.fck);
clk_put(sossi.fck);
return r;
}
static void sossi_cleanup(void)
{
omap_lcdc_free_dma_callback();
clk_put(sossi.fck);
iounmap(sossi.base);
}
struct lcd_ctrl_extif omap1_ext_if = {
.init = sossi_init,
.cleanup = sossi_cleanup,
.get_clk_info = sossi_get_clk_info,
.convert_timings = sossi_convert_timings,
.set_timings = sossi_set_timings,
.set_bits_per_cycle = sossi_set_bits_per_cycle,
.setup_tearsync = sossi_setup_tearsync,
.enable_tearsync = sossi_enable_tearsync,
.write_command = sossi_write_command,
.read_data = sossi_read_data,
.write_data = sossi_write_data,
.transfer_area = sossi_transfer_area,
.max_transmit_size = SOSSI_MAX_XMIT_BYTES,
};