linux_dsm_epyc7002/arch/x86/platform/uv/uv_nmi.c

667 lines
17 KiB
C
Raw Normal View History

/*
* SGI NMI/TRACE support routines
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Copyright (c) 2009-2013 Silicon Graphics, Inc. All Rights Reserved.
* Copyright (c) Mike Travis
*/
#include <linux/cpu.h>
x86/UV: Update UV support for external NMI signals The current UV NMI handler has not been updated for the changes in the system NMI handler and the perf operations. The UV NMI handler reads an MMR in the UV Hub to check to see if the NMI event was caused by the external 'system NMI' that the operator can initiate on the System Mgmt Controller. The problem arises when the perf tools are running, causing millions of perf events per second on very large CPU count systems. Previously this was okay because the perf NMI handler ran at a higher priority on the NMI call chain and if the NMI was a perf event, it would stop calling other NMI handlers remaining on the NMI call chain. Now the system NMI handler calls all the handlers on the NMI call chain including the UV NMI handler. This causes the UV NMI handler to read the MMRs at the same millions per second rate. This can lead to significant performance loss and possible system failures. It also can cause thousands of 'Dazed and Confused' messages being sent to the system console. This effectively makes perf tools unusable on UV systems. To avoid this excessive overhead when perf tools are running, this code has been optimized to minimize reading of the MMRs as much as possible, by moving to the NMI_UNKNOWN notifier chain. This chain is called only when all the users on the standard NMI_LOCAL call chain have been called and none of them have claimed this NMI. There is an exception where the NMI_LOCAL notifier chain is used. When the perf tools are in use, it's possible that the UV NMI was captured by some other NMI handler and then either ignored or mistakenly processed as a perf event. We set a per_cpu ('ping') flag for those CPUs that ignored the initial NMI, and then send them an IPI NMI signal. The NMI_LOCAL handler on each cpu does not need to read the MMR, but instead checks the in memory flag indicating it was pinged. There are two module variables, 'ping_count' indicating how many requested NMI events occurred, and 'ping_misses' indicating how many stray NMI events. These most likely are perf events so it shows the overhead of the perf NMI interrupts and how many MMR reads were avoided. This patch also minimizes the reads of the MMRs by having the first cpu entering the NMI handler on each node set a per HUB in-memory atomic value. (Having a per HUB value avoids sending lock traffic over NumaLink.) Both types of UV NMIs from the SMI layer are supported. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Hedi Berriche <hedi@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20130923212500.353547733@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-24 04:25:01 +07:00
#include <linux/delay.h>
#include <linux/kexec.h>
x86/UV: Update UV support for external NMI signals The current UV NMI handler has not been updated for the changes in the system NMI handler and the perf operations. The UV NMI handler reads an MMR in the UV Hub to check to see if the NMI event was caused by the external 'system NMI' that the operator can initiate on the System Mgmt Controller. The problem arises when the perf tools are running, causing millions of perf events per second on very large CPU count systems. Previously this was okay because the perf NMI handler ran at a higher priority on the NMI call chain and if the NMI was a perf event, it would stop calling other NMI handlers remaining on the NMI call chain. Now the system NMI handler calls all the handlers on the NMI call chain including the UV NMI handler. This causes the UV NMI handler to read the MMRs at the same millions per second rate. This can lead to significant performance loss and possible system failures. It also can cause thousands of 'Dazed and Confused' messages being sent to the system console. This effectively makes perf tools unusable on UV systems. To avoid this excessive overhead when perf tools are running, this code has been optimized to minimize reading of the MMRs as much as possible, by moving to the NMI_UNKNOWN notifier chain. This chain is called only when all the users on the standard NMI_LOCAL call chain have been called and none of them have claimed this NMI. There is an exception where the NMI_LOCAL notifier chain is used. When the perf tools are in use, it's possible that the UV NMI was captured by some other NMI handler and then either ignored or mistakenly processed as a perf event. We set a per_cpu ('ping') flag for those CPUs that ignored the initial NMI, and then send them an IPI NMI signal. The NMI_LOCAL handler on each cpu does not need to read the MMR, but instead checks the in memory flag indicating it was pinged. There are two module variables, 'ping_count' indicating how many requested NMI events occurred, and 'ping_misses' indicating how many stray NMI events. These most likely are perf events so it shows the overhead of the perf NMI interrupts and how many MMR reads were avoided. This patch also minimizes the reads of the MMRs by having the first cpu entering the NMI handler on each node set a per HUB in-memory atomic value. (Having a per HUB value avoids sending lock traffic over NumaLink.) Both types of UV NMIs from the SMI layer are supported. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Hedi Berriche <hedi@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20130923212500.353547733@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-24 04:25:01 +07:00
#include <linux/module.h>
#include <linux/nmi.h>
x86/UV: Update UV support for external NMI signals The current UV NMI handler has not been updated for the changes in the system NMI handler and the perf operations. The UV NMI handler reads an MMR in the UV Hub to check to see if the NMI event was caused by the external 'system NMI' that the operator can initiate on the System Mgmt Controller. The problem arises when the perf tools are running, causing millions of perf events per second on very large CPU count systems. Previously this was okay because the perf NMI handler ran at a higher priority on the NMI call chain and if the NMI was a perf event, it would stop calling other NMI handlers remaining on the NMI call chain. Now the system NMI handler calls all the handlers on the NMI call chain including the UV NMI handler. This causes the UV NMI handler to read the MMRs at the same millions per second rate. This can lead to significant performance loss and possible system failures. It also can cause thousands of 'Dazed and Confused' messages being sent to the system console. This effectively makes perf tools unusable on UV systems. To avoid this excessive overhead when perf tools are running, this code has been optimized to minimize reading of the MMRs as much as possible, by moving to the NMI_UNKNOWN notifier chain. This chain is called only when all the users on the standard NMI_LOCAL call chain have been called and none of them have claimed this NMI. There is an exception where the NMI_LOCAL notifier chain is used. When the perf tools are in use, it's possible that the UV NMI was captured by some other NMI handler and then either ignored or mistakenly processed as a perf event. We set a per_cpu ('ping') flag for those CPUs that ignored the initial NMI, and then send them an IPI NMI signal. The NMI_LOCAL handler on each cpu does not need to read the MMR, but instead checks the in memory flag indicating it was pinged. There are two module variables, 'ping_count' indicating how many requested NMI events occurred, and 'ping_misses' indicating how many stray NMI events. These most likely are perf events so it shows the overhead of the perf NMI interrupts and how many MMR reads were avoided. This patch also minimizes the reads of the MMRs by having the first cpu entering the NMI handler on each node set a per HUB in-memory atomic value. (Having a per HUB value avoids sending lock traffic over NumaLink.) Both types of UV NMIs from the SMI layer are supported. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Hedi Berriche <hedi@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20130923212500.353547733@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-24 04:25:01 +07:00
#include <linux/sched.h>
#include <linux/slab.h>
#include <asm/apic.h>
x86/UV: Update UV support for external NMI signals The current UV NMI handler has not been updated for the changes in the system NMI handler and the perf operations. The UV NMI handler reads an MMR in the UV Hub to check to see if the NMI event was caused by the external 'system NMI' that the operator can initiate on the System Mgmt Controller. The problem arises when the perf tools are running, causing millions of perf events per second on very large CPU count systems. Previously this was okay because the perf NMI handler ran at a higher priority on the NMI call chain and if the NMI was a perf event, it would stop calling other NMI handlers remaining on the NMI call chain. Now the system NMI handler calls all the handlers on the NMI call chain including the UV NMI handler. This causes the UV NMI handler to read the MMRs at the same millions per second rate. This can lead to significant performance loss and possible system failures. It also can cause thousands of 'Dazed and Confused' messages being sent to the system console. This effectively makes perf tools unusable on UV systems. To avoid this excessive overhead when perf tools are running, this code has been optimized to minimize reading of the MMRs as much as possible, by moving to the NMI_UNKNOWN notifier chain. This chain is called only when all the users on the standard NMI_LOCAL call chain have been called and none of them have claimed this NMI. There is an exception where the NMI_LOCAL notifier chain is used. When the perf tools are in use, it's possible that the UV NMI was captured by some other NMI handler and then either ignored or mistakenly processed as a perf event. We set a per_cpu ('ping') flag for those CPUs that ignored the initial NMI, and then send them an IPI NMI signal. The NMI_LOCAL handler on each cpu does not need to read the MMR, but instead checks the in memory flag indicating it was pinged. There are two module variables, 'ping_count' indicating how many requested NMI events occurred, and 'ping_misses' indicating how many stray NMI events. These most likely are perf events so it shows the overhead of the perf NMI interrupts and how many MMR reads were avoided. This patch also minimizes the reads of the MMRs by having the first cpu entering the NMI handler on each node set a per HUB in-memory atomic value. (Having a per HUB value avoids sending lock traffic over NumaLink.) Both types of UV NMIs from the SMI layer are supported. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Hedi Berriche <hedi@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20130923212500.353547733@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-24 04:25:01 +07:00
#include <asm/current.h>
#include <asm/kdebug.h>
#include <asm/local64.h>
#include <asm/nmi.h>
#include <asm/uv/uv.h>
#include <asm/uv/uv_hub.h>
#include <asm/uv/uv_mmrs.h>
void (*uv_trace_func)(const char *f, const int l, const char *fmt, ...);
EXPORT_SYMBOL(uv_trace_func);
void (*uv_trace_nmi_func)(unsigned int reason, struct pt_regs *regs);
EXPORT_SYMBOL(uv_trace_nmi_func);
x86/UV: Update UV support for external NMI signals The current UV NMI handler has not been updated for the changes in the system NMI handler and the perf operations. The UV NMI handler reads an MMR in the UV Hub to check to see if the NMI event was caused by the external 'system NMI' that the operator can initiate on the System Mgmt Controller. The problem arises when the perf tools are running, causing millions of perf events per second on very large CPU count systems. Previously this was okay because the perf NMI handler ran at a higher priority on the NMI call chain and if the NMI was a perf event, it would stop calling other NMI handlers remaining on the NMI call chain. Now the system NMI handler calls all the handlers on the NMI call chain including the UV NMI handler. This causes the UV NMI handler to read the MMRs at the same millions per second rate. This can lead to significant performance loss and possible system failures. It also can cause thousands of 'Dazed and Confused' messages being sent to the system console. This effectively makes perf tools unusable on UV systems. To avoid this excessive overhead when perf tools are running, this code has been optimized to minimize reading of the MMRs as much as possible, by moving to the NMI_UNKNOWN notifier chain. This chain is called only when all the users on the standard NMI_LOCAL call chain have been called and none of them have claimed this NMI. There is an exception where the NMI_LOCAL notifier chain is used. When the perf tools are in use, it's possible that the UV NMI was captured by some other NMI handler and then either ignored or mistakenly processed as a perf event. We set a per_cpu ('ping') flag for those CPUs that ignored the initial NMI, and then send them an IPI NMI signal. The NMI_LOCAL handler on each cpu does not need to read the MMR, but instead checks the in memory flag indicating it was pinged. There are two module variables, 'ping_count' indicating how many requested NMI events occurred, and 'ping_misses' indicating how many stray NMI events. These most likely are perf events so it shows the overhead of the perf NMI interrupts and how many MMR reads were avoided. This patch also minimizes the reads of the MMRs by having the first cpu entering the NMI handler on each node set a per HUB in-memory atomic value. (Having a per HUB value avoids sending lock traffic over NumaLink.) Both types of UV NMIs from the SMI layer are supported. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Hedi Berriche <hedi@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20130923212500.353547733@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-24 04:25:01 +07:00
/*
* UV handler for NMI
*
* Handle system-wide NMI events generated by the global 'power nmi' command.
*
* Basic operation is to field the NMI interrupt on each cpu and wait
* until all cpus have arrived into the nmi handler. If some cpus do not
* make it into the handler, try and force them in with the IPI(NMI) signal.
*
* We also have to lessen UV Hub MMR accesses as much as possible as this
* disrupts the UV Hub's primary mission of directing NumaLink traffic and
* can cause system problems to occur.
*
* To do this we register our primary NMI notifier on the NMI_UNKNOWN
* chain. This reduces the number of false NMI calls when the perf
* tools are running which generate an enormous number of NMIs per
* second (~4M/s for 1024 cpu threads). Our secondary NMI handler is
* very short as it only checks that if it has been "pinged" with the
* IPI(NMI) signal as mentioned above, and does not read the UV Hub's MMR.
*
*/
static struct uv_hub_nmi_s **uv_hub_nmi_list;
DEFINE_PER_CPU(struct uv_cpu_nmi_s, __uv_cpu_nmi);
EXPORT_PER_CPU_SYMBOL_GPL(__uv_cpu_nmi);
static unsigned long nmi_mmr;
static unsigned long nmi_mmr_clear;
static unsigned long nmi_mmr_pending;
static atomic_t uv_in_nmi;
static atomic_t uv_nmi_cpu = ATOMIC_INIT(-1);
static atomic_t uv_nmi_cpus_in_nmi = ATOMIC_INIT(-1);
static atomic_t uv_nmi_slave_continue;
static atomic_t uv_nmi_kexec_failed;
x86/UV: Update UV support for external NMI signals The current UV NMI handler has not been updated for the changes in the system NMI handler and the perf operations. The UV NMI handler reads an MMR in the UV Hub to check to see if the NMI event was caused by the external 'system NMI' that the operator can initiate on the System Mgmt Controller. The problem arises when the perf tools are running, causing millions of perf events per second on very large CPU count systems. Previously this was okay because the perf NMI handler ran at a higher priority on the NMI call chain and if the NMI was a perf event, it would stop calling other NMI handlers remaining on the NMI call chain. Now the system NMI handler calls all the handlers on the NMI call chain including the UV NMI handler. This causes the UV NMI handler to read the MMRs at the same millions per second rate. This can lead to significant performance loss and possible system failures. It also can cause thousands of 'Dazed and Confused' messages being sent to the system console. This effectively makes perf tools unusable on UV systems. To avoid this excessive overhead when perf tools are running, this code has been optimized to minimize reading of the MMRs as much as possible, by moving to the NMI_UNKNOWN notifier chain. This chain is called only when all the users on the standard NMI_LOCAL call chain have been called and none of them have claimed this NMI. There is an exception where the NMI_LOCAL notifier chain is used. When the perf tools are in use, it's possible that the UV NMI was captured by some other NMI handler and then either ignored or mistakenly processed as a perf event. We set a per_cpu ('ping') flag for those CPUs that ignored the initial NMI, and then send them an IPI NMI signal. The NMI_LOCAL handler on each cpu does not need to read the MMR, but instead checks the in memory flag indicating it was pinged. There are two module variables, 'ping_count' indicating how many requested NMI events occurred, and 'ping_misses' indicating how many stray NMI events. These most likely are perf events so it shows the overhead of the perf NMI interrupts and how many MMR reads were avoided. This patch also minimizes the reads of the MMRs by having the first cpu entering the NMI handler on each node set a per HUB in-memory atomic value. (Having a per HUB value avoids sending lock traffic over NumaLink.) Both types of UV NMIs from the SMI layer are supported. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Hedi Berriche <hedi@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20130923212500.353547733@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-24 04:25:01 +07:00
static cpumask_var_t uv_nmi_cpu_mask;
/* Values for uv_nmi_slave_continue */
#define SLAVE_CLEAR 0
#define SLAVE_CONTINUE 1
#define SLAVE_EXIT 2
/*
x86/UV: Update UV support for external NMI signals The current UV NMI handler has not been updated for the changes in the system NMI handler and the perf operations. The UV NMI handler reads an MMR in the UV Hub to check to see if the NMI event was caused by the external 'system NMI' that the operator can initiate on the System Mgmt Controller. The problem arises when the perf tools are running, causing millions of perf events per second on very large CPU count systems. Previously this was okay because the perf NMI handler ran at a higher priority on the NMI call chain and if the NMI was a perf event, it would stop calling other NMI handlers remaining on the NMI call chain. Now the system NMI handler calls all the handlers on the NMI call chain including the UV NMI handler. This causes the UV NMI handler to read the MMRs at the same millions per second rate. This can lead to significant performance loss and possible system failures. It also can cause thousands of 'Dazed and Confused' messages being sent to the system console. This effectively makes perf tools unusable on UV systems. To avoid this excessive overhead when perf tools are running, this code has been optimized to minimize reading of the MMRs as much as possible, by moving to the NMI_UNKNOWN notifier chain. This chain is called only when all the users on the standard NMI_LOCAL call chain have been called and none of them have claimed this NMI. There is an exception where the NMI_LOCAL notifier chain is used. When the perf tools are in use, it's possible that the UV NMI was captured by some other NMI handler and then either ignored or mistakenly processed as a perf event. We set a per_cpu ('ping') flag for those CPUs that ignored the initial NMI, and then send them an IPI NMI signal. The NMI_LOCAL handler on each cpu does not need to read the MMR, but instead checks the in memory flag indicating it was pinged. There are two module variables, 'ping_count' indicating how many requested NMI events occurred, and 'ping_misses' indicating how many stray NMI events. These most likely are perf events so it shows the overhead of the perf NMI interrupts and how many MMR reads were avoided. This patch also minimizes the reads of the MMRs by having the first cpu entering the NMI handler on each node set a per HUB in-memory atomic value. (Having a per HUB value avoids sending lock traffic over NumaLink.) Both types of UV NMIs from the SMI layer are supported. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Hedi Berriche <hedi@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20130923212500.353547733@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-24 04:25:01 +07:00
* Default is all stack dumps go to the console and buffer.
* Lower level to send to log buffer only.
*/
x86/UV: Update UV support for external NMI signals The current UV NMI handler has not been updated for the changes in the system NMI handler and the perf operations. The UV NMI handler reads an MMR in the UV Hub to check to see if the NMI event was caused by the external 'system NMI' that the operator can initiate on the System Mgmt Controller. The problem arises when the perf tools are running, causing millions of perf events per second on very large CPU count systems. Previously this was okay because the perf NMI handler ran at a higher priority on the NMI call chain and if the NMI was a perf event, it would stop calling other NMI handlers remaining on the NMI call chain. Now the system NMI handler calls all the handlers on the NMI call chain including the UV NMI handler. This causes the UV NMI handler to read the MMRs at the same millions per second rate. This can lead to significant performance loss and possible system failures. It also can cause thousands of 'Dazed and Confused' messages being sent to the system console. This effectively makes perf tools unusable on UV systems. To avoid this excessive overhead when perf tools are running, this code has been optimized to minimize reading of the MMRs as much as possible, by moving to the NMI_UNKNOWN notifier chain. This chain is called only when all the users on the standard NMI_LOCAL call chain have been called and none of them have claimed this NMI. There is an exception where the NMI_LOCAL notifier chain is used. When the perf tools are in use, it's possible that the UV NMI was captured by some other NMI handler and then either ignored or mistakenly processed as a perf event. We set a per_cpu ('ping') flag for those CPUs that ignored the initial NMI, and then send them an IPI NMI signal. The NMI_LOCAL handler on each cpu does not need to read the MMR, but instead checks the in memory flag indicating it was pinged. There are two module variables, 'ping_count' indicating how many requested NMI events occurred, and 'ping_misses' indicating how many stray NMI events. These most likely are perf events so it shows the overhead of the perf NMI interrupts and how many MMR reads were avoided. This patch also minimizes the reads of the MMRs by having the first cpu entering the NMI handler on each node set a per HUB in-memory atomic value. (Having a per HUB value avoids sending lock traffic over NumaLink.) Both types of UV NMIs from the SMI layer are supported. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Hedi Berriche <hedi@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20130923212500.353547733@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-24 04:25:01 +07:00
static int uv_nmi_loglevel = 7;
module_param_named(dump_loglevel, uv_nmi_loglevel, int, 0644);
/*
* The following values show statistics on how perf events are affecting
* this system.
*/
static int param_get_local64(char *buffer, const struct kernel_param *kp)
{
x86/UV: Update UV support for external NMI signals The current UV NMI handler has not been updated for the changes in the system NMI handler and the perf operations. The UV NMI handler reads an MMR in the UV Hub to check to see if the NMI event was caused by the external 'system NMI' that the operator can initiate on the System Mgmt Controller. The problem arises when the perf tools are running, causing millions of perf events per second on very large CPU count systems. Previously this was okay because the perf NMI handler ran at a higher priority on the NMI call chain and if the NMI was a perf event, it would stop calling other NMI handlers remaining on the NMI call chain. Now the system NMI handler calls all the handlers on the NMI call chain including the UV NMI handler. This causes the UV NMI handler to read the MMRs at the same millions per second rate. This can lead to significant performance loss and possible system failures. It also can cause thousands of 'Dazed and Confused' messages being sent to the system console. This effectively makes perf tools unusable on UV systems. To avoid this excessive overhead when perf tools are running, this code has been optimized to minimize reading of the MMRs as much as possible, by moving to the NMI_UNKNOWN notifier chain. This chain is called only when all the users on the standard NMI_LOCAL call chain have been called and none of them have claimed this NMI. There is an exception where the NMI_LOCAL notifier chain is used. When the perf tools are in use, it's possible that the UV NMI was captured by some other NMI handler and then either ignored or mistakenly processed as a perf event. We set a per_cpu ('ping') flag for those CPUs that ignored the initial NMI, and then send them an IPI NMI signal. The NMI_LOCAL handler on each cpu does not need to read the MMR, but instead checks the in memory flag indicating it was pinged. There are two module variables, 'ping_count' indicating how many requested NMI events occurred, and 'ping_misses' indicating how many stray NMI events. These most likely are perf events so it shows the overhead of the perf NMI interrupts and how many MMR reads were avoided. This patch also minimizes the reads of the MMRs by having the first cpu entering the NMI handler on each node set a per HUB in-memory atomic value. (Having a per HUB value avoids sending lock traffic over NumaLink.) Both types of UV NMIs from the SMI layer are supported. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Hedi Berriche <hedi@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20130923212500.353547733@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-24 04:25:01 +07:00
return sprintf(buffer, "%lu\n", local64_read((local64_t *)kp->arg));
}
x86/UV: Update UV support for external NMI signals The current UV NMI handler has not been updated for the changes in the system NMI handler and the perf operations. The UV NMI handler reads an MMR in the UV Hub to check to see if the NMI event was caused by the external 'system NMI' that the operator can initiate on the System Mgmt Controller. The problem arises when the perf tools are running, causing millions of perf events per second on very large CPU count systems. Previously this was okay because the perf NMI handler ran at a higher priority on the NMI call chain and if the NMI was a perf event, it would stop calling other NMI handlers remaining on the NMI call chain. Now the system NMI handler calls all the handlers on the NMI call chain including the UV NMI handler. This causes the UV NMI handler to read the MMRs at the same millions per second rate. This can lead to significant performance loss and possible system failures. It also can cause thousands of 'Dazed and Confused' messages being sent to the system console. This effectively makes perf tools unusable on UV systems. To avoid this excessive overhead when perf tools are running, this code has been optimized to minimize reading of the MMRs as much as possible, by moving to the NMI_UNKNOWN notifier chain. This chain is called only when all the users on the standard NMI_LOCAL call chain have been called and none of them have claimed this NMI. There is an exception where the NMI_LOCAL notifier chain is used. When the perf tools are in use, it's possible that the UV NMI was captured by some other NMI handler and then either ignored or mistakenly processed as a perf event. We set a per_cpu ('ping') flag for those CPUs that ignored the initial NMI, and then send them an IPI NMI signal. The NMI_LOCAL handler on each cpu does not need to read the MMR, but instead checks the in memory flag indicating it was pinged. There are two module variables, 'ping_count' indicating how many requested NMI events occurred, and 'ping_misses' indicating how many stray NMI events. These most likely are perf events so it shows the overhead of the perf NMI interrupts and how many MMR reads were avoided. This patch also minimizes the reads of the MMRs by having the first cpu entering the NMI handler on each node set a per HUB in-memory atomic value. (Having a per HUB value avoids sending lock traffic over NumaLink.) Both types of UV NMIs from the SMI layer are supported. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Hedi Berriche <hedi@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20130923212500.353547733@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-24 04:25:01 +07:00
static int param_set_local64(const char *val, const struct kernel_param *kp)
{
/* clear on any write */
local64_set((local64_t *)kp->arg, 0);
return 0;
}
static struct kernel_param_ops param_ops_local64 = {
.get = param_get_local64,
.set = param_set_local64,
};
#define param_check_local64(name, p) __param_check(name, p, local64_t)
static local64_t uv_nmi_count;
module_param_named(nmi_count, uv_nmi_count, local64, 0644);
static local64_t uv_nmi_misses;
module_param_named(nmi_misses, uv_nmi_misses, local64, 0644);
static local64_t uv_nmi_ping_count;
module_param_named(ping_count, uv_nmi_ping_count, local64, 0644);
static local64_t uv_nmi_ping_misses;
module_param_named(ping_misses, uv_nmi_ping_misses, local64, 0644);
/*
* Following values allow tuning for large systems under heavy loading
*/
static int uv_nmi_initial_delay = 100;
module_param_named(initial_delay, uv_nmi_initial_delay, int, 0644);
static int uv_nmi_slave_delay = 100;
module_param_named(slave_delay, uv_nmi_slave_delay, int, 0644);
static int uv_nmi_loop_delay = 100;
module_param_named(loop_delay, uv_nmi_loop_delay, int, 0644);
static int uv_nmi_trigger_delay = 10000;
module_param_named(trigger_delay, uv_nmi_trigger_delay, int, 0644);
static int uv_nmi_wait_count = 100;
module_param_named(wait_count, uv_nmi_wait_count, int, 0644);
static int uv_nmi_retry_count = 500;
module_param_named(retry_count, uv_nmi_retry_count, int, 0644);
/*
* Valid NMI Actions:
* "dump" - dump process stack for each cpu
* "ips" - dump IP info for each cpu
* "kdump" - do crash dump
*/
static char uv_nmi_action[8] = "dump";
module_param_string(action, uv_nmi_action, sizeof(uv_nmi_action), 0644);
static inline bool uv_nmi_action_is(const char *action)
{
return (strncmp(uv_nmi_action, action, strlen(action)) == 0);
}
x86/UV: Update UV support for external NMI signals The current UV NMI handler has not been updated for the changes in the system NMI handler and the perf operations. The UV NMI handler reads an MMR in the UV Hub to check to see if the NMI event was caused by the external 'system NMI' that the operator can initiate on the System Mgmt Controller. The problem arises when the perf tools are running, causing millions of perf events per second on very large CPU count systems. Previously this was okay because the perf NMI handler ran at a higher priority on the NMI call chain and if the NMI was a perf event, it would stop calling other NMI handlers remaining on the NMI call chain. Now the system NMI handler calls all the handlers on the NMI call chain including the UV NMI handler. This causes the UV NMI handler to read the MMRs at the same millions per second rate. This can lead to significant performance loss and possible system failures. It also can cause thousands of 'Dazed and Confused' messages being sent to the system console. This effectively makes perf tools unusable on UV systems. To avoid this excessive overhead when perf tools are running, this code has been optimized to minimize reading of the MMRs as much as possible, by moving to the NMI_UNKNOWN notifier chain. This chain is called only when all the users on the standard NMI_LOCAL call chain have been called and none of them have claimed this NMI. There is an exception where the NMI_LOCAL notifier chain is used. When the perf tools are in use, it's possible that the UV NMI was captured by some other NMI handler and then either ignored or mistakenly processed as a perf event. We set a per_cpu ('ping') flag for those CPUs that ignored the initial NMI, and then send them an IPI NMI signal. The NMI_LOCAL handler on each cpu does not need to read the MMR, but instead checks the in memory flag indicating it was pinged. There are two module variables, 'ping_count' indicating how many requested NMI events occurred, and 'ping_misses' indicating how many stray NMI events. These most likely are perf events so it shows the overhead of the perf NMI interrupts and how many MMR reads were avoided. This patch also minimizes the reads of the MMRs by having the first cpu entering the NMI handler on each node set a per HUB in-memory atomic value. (Having a per HUB value avoids sending lock traffic over NumaLink.) Both types of UV NMIs from the SMI layer are supported. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Hedi Berriche <hedi@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20130923212500.353547733@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-24 04:25:01 +07:00
/* Setup which NMI support is present in system */
static void uv_nmi_setup_mmrs(void)
{
if (uv_read_local_mmr(UVH_NMI_MMRX_SUPPORTED)) {
uv_write_local_mmr(UVH_NMI_MMRX_REQ,
1UL << UVH_NMI_MMRX_REQ_SHIFT);
nmi_mmr = UVH_NMI_MMRX;
nmi_mmr_clear = UVH_NMI_MMRX_CLEAR;
nmi_mmr_pending = 1UL << UVH_NMI_MMRX_SHIFT;
pr_info("UV: SMI NMI support: %s\n", UVH_NMI_MMRX_TYPE);
} else {
nmi_mmr = UVH_NMI_MMR;
nmi_mmr_clear = UVH_NMI_MMR_CLEAR;
nmi_mmr_pending = 1UL << UVH_NMI_MMR_SHIFT;
pr_info("UV: SMI NMI support: %s\n", UVH_NMI_MMR_TYPE);
}
}
/* Read NMI MMR and check if NMI flag was set by BMC. */
static inline int uv_nmi_test_mmr(struct uv_hub_nmi_s *hub_nmi)
{
hub_nmi->nmi_value = uv_read_local_mmr(nmi_mmr);
atomic_inc(&hub_nmi->read_mmr_count);
return !!(hub_nmi->nmi_value & nmi_mmr_pending);
}
static inline void uv_local_mmr_clear_nmi(void)
{
uv_write_local_mmr(nmi_mmr_clear, nmi_mmr_pending);
}
/*
* If first cpu in on this hub, set hub_nmi "in_nmi" and "owner" values and
* return true. If first cpu in on the system, set global "in_nmi" flag.
*/
static int uv_set_in_nmi(int cpu, struct uv_hub_nmi_s *hub_nmi)
{
int first = atomic_add_unless(&hub_nmi->in_nmi, 1, 1);
if (first) {
atomic_set(&hub_nmi->cpu_owner, cpu);
if (atomic_add_unless(&uv_in_nmi, 1, 1))
atomic_set(&uv_nmi_cpu, cpu);
atomic_inc(&hub_nmi->nmi_count);
}
return first;
}
/* Check if this is a system NMI event */
static int uv_check_nmi(struct uv_hub_nmi_s *hub_nmi)
{
int cpu = smp_processor_id();
int nmi = 0;
local64_inc(&uv_nmi_count);
uv_cpu_nmi.queries++;
do {
nmi = atomic_read(&hub_nmi->in_nmi);
if (nmi)
break;
if (raw_spin_trylock(&hub_nmi->nmi_lock)) {
/* check hub MMR NMI flag */
if (uv_nmi_test_mmr(hub_nmi)) {
uv_set_in_nmi(cpu, hub_nmi);
nmi = 1;
break;
}
/* MMR NMI flag is clear */
raw_spin_unlock(&hub_nmi->nmi_lock);
} else {
/* wait a moment for the hub nmi locker to set flag */
cpu_relax();
udelay(uv_nmi_slave_delay);
/* re-check hub in_nmi flag */
nmi = atomic_read(&hub_nmi->in_nmi);
if (nmi)
break;
}
/* check if this BMC missed setting the MMR NMI flag */
if (!nmi) {
nmi = atomic_read(&uv_in_nmi);
if (nmi)
uv_set_in_nmi(cpu, hub_nmi);
}
} while (0);
if (!nmi)
local64_inc(&uv_nmi_misses);
return nmi;
}
/* Need to reset the NMI MMR register, but only once per hub. */
static inline void uv_clear_nmi(int cpu)
{
struct uv_hub_nmi_s *hub_nmi = uv_hub_nmi;
if (cpu == atomic_read(&hub_nmi->cpu_owner)) {
atomic_set(&hub_nmi->cpu_owner, -1);
atomic_set(&hub_nmi->in_nmi, 0);
uv_local_mmr_clear_nmi();
raw_spin_unlock(&hub_nmi->nmi_lock);
}
}
/* Print non-responding cpus */
static void uv_nmi_nr_cpus_pr(char *fmt)
{
static char cpu_list[1024];
int len = sizeof(cpu_list);
int c = cpumask_weight(uv_nmi_cpu_mask);
int n = cpulist_scnprintf(cpu_list, len, uv_nmi_cpu_mask);
if (n >= len-1)
strcpy(&cpu_list[len - 6], "...\n");
printk(fmt, c, cpu_list);
}
/* Ping non-responding cpus attemping to force them into the NMI handler */
static void uv_nmi_nr_cpus_ping(void)
{
int cpu;
for_each_cpu(cpu, uv_nmi_cpu_mask)
atomic_set(&uv_cpu_nmi_per(cpu).pinging, 1);
apic->send_IPI_mask(uv_nmi_cpu_mask, APIC_DM_NMI);
}
/* Clean up flags for cpus that ignored both NMI and ping */
static void uv_nmi_cleanup_mask(void)
{
int cpu;
for_each_cpu(cpu, uv_nmi_cpu_mask) {
atomic_set(&uv_cpu_nmi_per(cpu).pinging, 0);
atomic_set(&uv_cpu_nmi_per(cpu).state, UV_NMI_STATE_OUT);
cpumask_clear_cpu(cpu, uv_nmi_cpu_mask);
}
}
/* Loop waiting as cpus enter nmi handler */
static int uv_nmi_wait_cpus(int first)
{
int i, j, k, n = num_online_cpus();
int last_k = 0, waiting = 0;
if (first) {
cpumask_copy(uv_nmi_cpu_mask, cpu_online_mask);
k = 0;
} else {
k = n - cpumask_weight(uv_nmi_cpu_mask);
}
udelay(uv_nmi_initial_delay);
for (i = 0; i < uv_nmi_retry_count; i++) {
int loop_delay = uv_nmi_loop_delay;
for_each_cpu(j, uv_nmi_cpu_mask) {
if (atomic_read(&uv_cpu_nmi_per(j).state)) {
cpumask_clear_cpu(j, uv_nmi_cpu_mask);
if (++k >= n)
break;
}
}
if (k >= n) { /* all in? */
k = n;
break;
}
if (last_k != k) { /* abort if no new cpus coming in */
last_k = k;
waiting = 0;
} else if (++waiting > uv_nmi_wait_count)
break;
/* extend delay if waiting only for cpu 0 */
if (waiting && (n - k) == 1 &&
cpumask_test_cpu(0, uv_nmi_cpu_mask))
loop_delay *= 100;
udelay(loop_delay);
}
atomic_set(&uv_nmi_cpus_in_nmi, k);
return n - k;
}
/* Wait until all slave cpus have entered UV NMI handler */
static void uv_nmi_wait(int master)
{
/* indicate this cpu is in */
atomic_set(&uv_cpu_nmi.state, UV_NMI_STATE_IN);
/* if not the first cpu in (the master), then we are a slave cpu */
if (!master)
return;
do {
/* wait for all other cpus to gather here */
if (!uv_nmi_wait_cpus(1))
break;
/* if not all made it in, send IPI NMI to them */
uv_nmi_nr_cpus_pr(KERN_ALERT
"UV: Sending NMI IPI to %d non-responding CPUs: %s\n");
uv_nmi_nr_cpus_ping();
/* if all cpus are in, then done */
if (!uv_nmi_wait_cpus(0))
break;
uv_nmi_nr_cpus_pr(KERN_ALERT
"UV: %d CPUs not in NMI loop: %s\n");
} while (0);
pr_alert("UV: %d of %d CPUs in NMI\n",
atomic_read(&uv_nmi_cpus_in_nmi), num_online_cpus());
}
static void uv_nmi_dump_cpu_ip_hdr(void)
{
printk(KERN_DEFAULT
"\nUV: %4s %6s %-32s %s (Note: PID 0 not listed)\n",
"CPU", "PID", "COMMAND", "IP");
}
static void uv_nmi_dump_cpu_ip(int cpu, struct pt_regs *regs)
{
printk(KERN_DEFAULT "UV: %4d %6d %-32.32s ",
cpu, current->pid, current->comm);
printk_address(regs->ip, 1);
}
x86/UV: Update UV support for external NMI signals The current UV NMI handler has not been updated for the changes in the system NMI handler and the perf operations. The UV NMI handler reads an MMR in the UV Hub to check to see if the NMI event was caused by the external 'system NMI' that the operator can initiate on the System Mgmt Controller. The problem arises when the perf tools are running, causing millions of perf events per second on very large CPU count systems. Previously this was okay because the perf NMI handler ran at a higher priority on the NMI call chain and if the NMI was a perf event, it would stop calling other NMI handlers remaining on the NMI call chain. Now the system NMI handler calls all the handlers on the NMI call chain including the UV NMI handler. This causes the UV NMI handler to read the MMRs at the same millions per second rate. This can lead to significant performance loss and possible system failures. It also can cause thousands of 'Dazed and Confused' messages being sent to the system console. This effectively makes perf tools unusable on UV systems. To avoid this excessive overhead when perf tools are running, this code has been optimized to minimize reading of the MMRs as much as possible, by moving to the NMI_UNKNOWN notifier chain. This chain is called only when all the users on the standard NMI_LOCAL call chain have been called and none of them have claimed this NMI. There is an exception where the NMI_LOCAL notifier chain is used. When the perf tools are in use, it's possible that the UV NMI was captured by some other NMI handler and then either ignored or mistakenly processed as a perf event. We set a per_cpu ('ping') flag for those CPUs that ignored the initial NMI, and then send them an IPI NMI signal. The NMI_LOCAL handler on each cpu does not need to read the MMR, but instead checks the in memory flag indicating it was pinged. There are two module variables, 'ping_count' indicating how many requested NMI events occurred, and 'ping_misses' indicating how many stray NMI events. These most likely are perf events so it shows the overhead of the perf NMI interrupts and how many MMR reads were avoided. This patch also minimizes the reads of the MMRs by having the first cpu entering the NMI handler on each node set a per HUB in-memory atomic value. (Having a per HUB value avoids sending lock traffic over NumaLink.) Both types of UV NMIs from the SMI layer are supported. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Hedi Berriche <hedi@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20130923212500.353547733@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-24 04:25:01 +07:00
/* Dump this cpu's state */
static void uv_nmi_dump_state_cpu(int cpu, struct pt_regs *regs)
{
const char *dots = " ................................. ";
if (uv_nmi_action_is("ips")) {
if (cpu == 0)
uv_nmi_dump_cpu_ip_hdr();
if (current->pid != 0)
uv_nmi_dump_cpu_ip(cpu, regs);
} else if (uv_nmi_action_is("dump")) {
printk(KERN_DEFAULT
"UV:%sNMI process trace for CPU %d\n", dots, cpu);
show_regs(regs);
}
x86/UV: Update UV support for external NMI signals The current UV NMI handler has not been updated for the changes in the system NMI handler and the perf operations. The UV NMI handler reads an MMR in the UV Hub to check to see if the NMI event was caused by the external 'system NMI' that the operator can initiate on the System Mgmt Controller. The problem arises when the perf tools are running, causing millions of perf events per second on very large CPU count systems. Previously this was okay because the perf NMI handler ran at a higher priority on the NMI call chain and if the NMI was a perf event, it would stop calling other NMI handlers remaining on the NMI call chain. Now the system NMI handler calls all the handlers on the NMI call chain including the UV NMI handler. This causes the UV NMI handler to read the MMRs at the same millions per second rate. This can lead to significant performance loss and possible system failures. It also can cause thousands of 'Dazed and Confused' messages being sent to the system console. This effectively makes perf tools unusable on UV systems. To avoid this excessive overhead when perf tools are running, this code has been optimized to minimize reading of the MMRs as much as possible, by moving to the NMI_UNKNOWN notifier chain. This chain is called only when all the users on the standard NMI_LOCAL call chain have been called and none of them have claimed this NMI. There is an exception where the NMI_LOCAL notifier chain is used. When the perf tools are in use, it's possible that the UV NMI was captured by some other NMI handler and then either ignored or mistakenly processed as a perf event. We set a per_cpu ('ping') flag for those CPUs that ignored the initial NMI, and then send them an IPI NMI signal. The NMI_LOCAL handler on each cpu does not need to read the MMR, but instead checks the in memory flag indicating it was pinged. There are two module variables, 'ping_count' indicating how many requested NMI events occurred, and 'ping_misses' indicating how many stray NMI events. These most likely are perf events so it shows the overhead of the perf NMI interrupts and how many MMR reads were avoided. This patch also minimizes the reads of the MMRs by having the first cpu entering the NMI handler on each node set a per HUB in-memory atomic value. (Having a per HUB value avoids sending lock traffic over NumaLink.) Both types of UV NMIs from the SMI layer are supported. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Hedi Berriche <hedi@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20130923212500.353547733@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-24 04:25:01 +07:00
atomic_set(&uv_cpu_nmi.state, UV_NMI_STATE_DUMP_DONE);
}
/* Trigger a slave cpu to dump it's state */
static void uv_nmi_trigger_dump(int cpu)
{
int retry = uv_nmi_trigger_delay;
if (atomic_read(&uv_cpu_nmi_per(cpu).state) != UV_NMI_STATE_IN)
return;
atomic_set(&uv_cpu_nmi_per(cpu).state, UV_NMI_STATE_DUMP);
do {
cpu_relax();
udelay(10);
if (atomic_read(&uv_cpu_nmi_per(cpu).state)
!= UV_NMI_STATE_DUMP)
return;
} while (--retry > 0);
pr_crit("UV: CPU %d stuck in process dump function\n", cpu);
atomic_set(&uv_cpu_nmi_per(cpu).state, UV_NMI_STATE_DUMP_DONE);
}
/* Wait until all cpus ready to exit */
static void uv_nmi_sync_exit(int master)
{
atomic_dec(&uv_nmi_cpus_in_nmi);
if (master) {
while (atomic_read(&uv_nmi_cpus_in_nmi) > 0)
cpu_relax();
atomic_set(&uv_nmi_slave_continue, SLAVE_CLEAR);
} else {
while (atomic_read(&uv_nmi_slave_continue))
cpu_relax();
}
}
/* Walk through cpu list and dump state of each */
static void uv_nmi_dump_state(int cpu, struct pt_regs *regs, int master)
{
if (master) {
int tcpu;
int ignored = 0;
int saved_console_loglevel = console_loglevel;
pr_alert("UV: tracing %s for %d CPUs from CPU %d\n",
uv_nmi_action_is("ips") ? "IPs" : "processes",
x86/UV: Update UV support for external NMI signals The current UV NMI handler has not been updated for the changes in the system NMI handler and the perf operations. The UV NMI handler reads an MMR in the UV Hub to check to see if the NMI event was caused by the external 'system NMI' that the operator can initiate on the System Mgmt Controller. The problem arises when the perf tools are running, causing millions of perf events per second on very large CPU count systems. Previously this was okay because the perf NMI handler ran at a higher priority on the NMI call chain and if the NMI was a perf event, it would stop calling other NMI handlers remaining on the NMI call chain. Now the system NMI handler calls all the handlers on the NMI call chain including the UV NMI handler. This causes the UV NMI handler to read the MMRs at the same millions per second rate. This can lead to significant performance loss and possible system failures. It also can cause thousands of 'Dazed and Confused' messages being sent to the system console. This effectively makes perf tools unusable on UV systems. To avoid this excessive overhead when perf tools are running, this code has been optimized to minimize reading of the MMRs as much as possible, by moving to the NMI_UNKNOWN notifier chain. This chain is called only when all the users on the standard NMI_LOCAL call chain have been called and none of them have claimed this NMI. There is an exception where the NMI_LOCAL notifier chain is used. When the perf tools are in use, it's possible that the UV NMI was captured by some other NMI handler and then either ignored or mistakenly processed as a perf event. We set a per_cpu ('ping') flag for those CPUs that ignored the initial NMI, and then send them an IPI NMI signal. The NMI_LOCAL handler on each cpu does not need to read the MMR, but instead checks the in memory flag indicating it was pinged. There are two module variables, 'ping_count' indicating how many requested NMI events occurred, and 'ping_misses' indicating how many stray NMI events. These most likely are perf events so it shows the overhead of the perf NMI interrupts and how many MMR reads were avoided. This patch also minimizes the reads of the MMRs by having the first cpu entering the NMI handler on each node set a per HUB in-memory atomic value. (Having a per HUB value avoids sending lock traffic over NumaLink.) Both types of UV NMIs from the SMI layer are supported. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Hedi Berriche <hedi@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20130923212500.353547733@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-24 04:25:01 +07:00
atomic_read(&uv_nmi_cpus_in_nmi), cpu);
console_loglevel = uv_nmi_loglevel;
atomic_set(&uv_nmi_slave_continue, SLAVE_EXIT);
for_each_online_cpu(tcpu) {
if (cpumask_test_cpu(tcpu, uv_nmi_cpu_mask))
ignored++;
else if (tcpu == cpu)
uv_nmi_dump_state_cpu(tcpu, regs);
else
uv_nmi_trigger_dump(tcpu);
}
x86/UV: Update UV support for external NMI signals The current UV NMI handler has not been updated for the changes in the system NMI handler and the perf operations. The UV NMI handler reads an MMR in the UV Hub to check to see if the NMI event was caused by the external 'system NMI' that the operator can initiate on the System Mgmt Controller. The problem arises when the perf tools are running, causing millions of perf events per second on very large CPU count systems. Previously this was okay because the perf NMI handler ran at a higher priority on the NMI call chain and if the NMI was a perf event, it would stop calling other NMI handlers remaining on the NMI call chain. Now the system NMI handler calls all the handlers on the NMI call chain including the UV NMI handler. This causes the UV NMI handler to read the MMRs at the same millions per second rate. This can lead to significant performance loss and possible system failures. It also can cause thousands of 'Dazed and Confused' messages being sent to the system console. This effectively makes perf tools unusable on UV systems. To avoid this excessive overhead when perf tools are running, this code has been optimized to minimize reading of the MMRs as much as possible, by moving to the NMI_UNKNOWN notifier chain. This chain is called only when all the users on the standard NMI_LOCAL call chain have been called and none of them have claimed this NMI. There is an exception where the NMI_LOCAL notifier chain is used. When the perf tools are in use, it's possible that the UV NMI was captured by some other NMI handler and then either ignored or mistakenly processed as a perf event. We set a per_cpu ('ping') flag for those CPUs that ignored the initial NMI, and then send them an IPI NMI signal. The NMI_LOCAL handler on each cpu does not need to read the MMR, but instead checks the in memory flag indicating it was pinged. There are two module variables, 'ping_count' indicating how many requested NMI events occurred, and 'ping_misses' indicating how many stray NMI events. These most likely are perf events so it shows the overhead of the perf NMI interrupts and how many MMR reads were avoided. This patch also minimizes the reads of the MMRs by having the first cpu entering the NMI handler on each node set a per HUB in-memory atomic value. (Having a per HUB value avoids sending lock traffic over NumaLink.) Both types of UV NMIs from the SMI layer are supported. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Hedi Berriche <hedi@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20130923212500.353547733@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-24 04:25:01 +07:00
if (ignored)
printk(KERN_DEFAULT "UV: %d CPUs ignored NMI\n",
ignored);
console_loglevel = saved_console_loglevel;
pr_alert("UV: process trace complete\n");
} else {
while (!atomic_read(&uv_nmi_slave_continue))
cpu_relax();
while (atomic_read(&uv_cpu_nmi.state) != UV_NMI_STATE_DUMP)
cpu_relax();
uv_nmi_dump_state_cpu(cpu, regs);
}
x86/UV: Update UV support for external NMI signals The current UV NMI handler has not been updated for the changes in the system NMI handler and the perf operations. The UV NMI handler reads an MMR in the UV Hub to check to see if the NMI event was caused by the external 'system NMI' that the operator can initiate on the System Mgmt Controller. The problem arises when the perf tools are running, causing millions of perf events per second on very large CPU count systems. Previously this was okay because the perf NMI handler ran at a higher priority on the NMI call chain and if the NMI was a perf event, it would stop calling other NMI handlers remaining on the NMI call chain. Now the system NMI handler calls all the handlers on the NMI call chain including the UV NMI handler. This causes the UV NMI handler to read the MMRs at the same millions per second rate. This can lead to significant performance loss and possible system failures. It also can cause thousands of 'Dazed and Confused' messages being sent to the system console. This effectively makes perf tools unusable on UV systems. To avoid this excessive overhead when perf tools are running, this code has been optimized to minimize reading of the MMRs as much as possible, by moving to the NMI_UNKNOWN notifier chain. This chain is called only when all the users on the standard NMI_LOCAL call chain have been called and none of them have claimed this NMI. There is an exception where the NMI_LOCAL notifier chain is used. When the perf tools are in use, it's possible that the UV NMI was captured by some other NMI handler and then either ignored or mistakenly processed as a perf event. We set a per_cpu ('ping') flag for those CPUs that ignored the initial NMI, and then send them an IPI NMI signal. The NMI_LOCAL handler on each cpu does not need to read the MMR, but instead checks the in memory flag indicating it was pinged. There are two module variables, 'ping_count' indicating how many requested NMI events occurred, and 'ping_misses' indicating how many stray NMI events. These most likely are perf events so it shows the overhead of the perf NMI interrupts and how many MMR reads were avoided. This patch also minimizes the reads of the MMRs by having the first cpu entering the NMI handler on each node set a per HUB in-memory atomic value. (Having a per HUB value avoids sending lock traffic over NumaLink.) Both types of UV NMIs from the SMI layer are supported. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Hedi Berriche <hedi@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20130923212500.353547733@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-24 04:25:01 +07:00
uv_nmi_sync_exit(master);
}
x86/UV: Update UV support for external NMI signals The current UV NMI handler has not been updated for the changes in the system NMI handler and the perf operations. The UV NMI handler reads an MMR in the UV Hub to check to see if the NMI event was caused by the external 'system NMI' that the operator can initiate on the System Mgmt Controller. The problem arises when the perf tools are running, causing millions of perf events per second on very large CPU count systems. Previously this was okay because the perf NMI handler ran at a higher priority on the NMI call chain and if the NMI was a perf event, it would stop calling other NMI handlers remaining on the NMI call chain. Now the system NMI handler calls all the handlers on the NMI call chain including the UV NMI handler. This causes the UV NMI handler to read the MMRs at the same millions per second rate. This can lead to significant performance loss and possible system failures. It also can cause thousands of 'Dazed and Confused' messages being sent to the system console. This effectively makes perf tools unusable on UV systems. To avoid this excessive overhead when perf tools are running, this code has been optimized to minimize reading of the MMRs as much as possible, by moving to the NMI_UNKNOWN notifier chain. This chain is called only when all the users on the standard NMI_LOCAL call chain have been called and none of them have claimed this NMI. There is an exception where the NMI_LOCAL notifier chain is used. When the perf tools are in use, it's possible that the UV NMI was captured by some other NMI handler and then either ignored or mistakenly processed as a perf event. We set a per_cpu ('ping') flag for those CPUs that ignored the initial NMI, and then send them an IPI NMI signal. The NMI_LOCAL handler on each cpu does not need to read the MMR, but instead checks the in memory flag indicating it was pinged. There are two module variables, 'ping_count' indicating how many requested NMI events occurred, and 'ping_misses' indicating how many stray NMI events. These most likely are perf events so it shows the overhead of the perf NMI interrupts and how many MMR reads were avoided. This patch also minimizes the reads of the MMRs by having the first cpu entering the NMI handler on each node set a per HUB in-memory atomic value. (Having a per HUB value avoids sending lock traffic over NumaLink.) Both types of UV NMIs from the SMI layer are supported. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Hedi Berriche <hedi@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20130923212500.353547733@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-24 04:25:01 +07:00
static void uv_nmi_touch_watchdogs(void)
{
touch_softlockup_watchdog_sync();
clocksource_touch_watchdog();
rcu_cpu_stall_reset();
touch_nmi_watchdog();
}
#if defined(CONFIG_KEXEC)
static void uv_nmi_kdump(int cpu, int master, struct pt_regs *regs)
{
/* Call crash to dump system state */
if (master) {
pr_emerg("UV: NMI executing crash_kexec on CPU%d\n", cpu);
crash_kexec(regs);
pr_emerg("UV: crash_kexec unexpectedly returned, ");
if (!kexec_crash_image) {
pr_cont("crash kernel not loaded\n");
atomic_set(&uv_nmi_kexec_failed, 1);
uv_nmi_sync_exit(1);
return;
}
pr_cont("kexec busy, stalling cpus while waiting\n");
}
/* If crash exec fails the slaves should return, otherwise stall */
while (atomic_read(&uv_nmi_kexec_failed) == 0)
mdelay(10);
/* Crash kernel most likely not loaded, return in an orderly fashion */
uv_nmi_sync_exit(0);
}
#else /* !CONFIG_KEXEC */
static inline void uv_nmi_kdump(int cpu, int master, struct pt_regs *regs)
{
if (master)
pr_err("UV: NMI kdump: KEXEC not supported in this kernel\n");
}
#endif /* !CONFIG_KEXEC */
x86/UV: Update UV support for external NMI signals The current UV NMI handler has not been updated for the changes in the system NMI handler and the perf operations. The UV NMI handler reads an MMR in the UV Hub to check to see if the NMI event was caused by the external 'system NMI' that the operator can initiate on the System Mgmt Controller. The problem arises when the perf tools are running, causing millions of perf events per second on very large CPU count systems. Previously this was okay because the perf NMI handler ran at a higher priority on the NMI call chain and if the NMI was a perf event, it would stop calling other NMI handlers remaining on the NMI call chain. Now the system NMI handler calls all the handlers on the NMI call chain including the UV NMI handler. This causes the UV NMI handler to read the MMRs at the same millions per second rate. This can lead to significant performance loss and possible system failures. It also can cause thousands of 'Dazed and Confused' messages being sent to the system console. This effectively makes perf tools unusable on UV systems. To avoid this excessive overhead when perf tools are running, this code has been optimized to minimize reading of the MMRs as much as possible, by moving to the NMI_UNKNOWN notifier chain. This chain is called only when all the users on the standard NMI_LOCAL call chain have been called and none of them have claimed this NMI. There is an exception where the NMI_LOCAL notifier chain is used. When the perf tools are in use, it's possible that the UV NMI was captured by some other NMI handler and then either ignored or mistakenly processed as a perf event. We set a per_cpu ('ping') flag for those CPUs that ignored the initial NMI, and then send them an IPI NMI signal. The NMI_LOCAL handler on each cpu does not need to read the MMR, but instead checks the in memory flag indicating it was pinged. There are two module variables, 'ping_count' indicating how many requested NMI events occurred, and 'ping_misses' indicating how many stray NMI events. These most likely are perf events so it shows the overhead of the perf NMI interrupts and how many MMR reads were avoided. This patch also minimizes the reads of the MMRs by having the first cpu entering the NMI handler on each node set a per HUB in-memory atomic value. (Having a per HUB value avoids sending lock traffic over NumaLink.) Both types of UV NMIs from the SMI layer are supported. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Hedi Berriche <hedi@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20130923212500.353547733@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-24 04:25:01 +07:00
/*
* UV NMI handler
*/
int uv_handle_nmi(unsigned int reason, struct pt_regs *regs)
{
struct uv_hub_nmi_s *hub_nmi = uv_hub_nmi;
int cpu = smp_processor_id();
int master = 0;
unsigned long flags;
local_irq_save(flags);
/* If not a UV System NMI, ignore */
if (!atomic_read(&uv_cpu_nmi.pinging) && !uv_check_nmi(hub_nmi)) {
local_irq_restore(flags);
return NMI_DONE;
x86/UV: Update UV support for external NMI signals The current UV NMI handler has not been updated for the changes in the system NMI handler and the perf operations. The UV NMI handler reads an MMR in the UV Hub to check to see if the NMI event was caused by the external 'system NMI' that the operator can initiate on the System Mgmt Controller. The problem arises when the perf tools are running, causing millions of perf events per second on very large CPU count systems. Previously this was okay because the perf NMI handler ran at a higher priority on the NMI call chain and if the NMI was a perf event, it would stop calling other NMI handlers remaining on the NMI call chain. Now the system NMI handler calls all the handlers on the NMI call chain including the UV NMI handler. This causes the UV NMI handler to read the MMRs at the same millions per second rate. This can lead to significant performance loss and possible system failures. It also can cause thousands of 'Dazed and Confused' messages being sent to the system console. This effectively makes perf tools unusable on UV systems. To avoid this excessive overhead when perf tools are running, this code has been optimized to minimize reading of the MMRs as much as possible, by moving to the NMI_UNKNOWN notifier chain. This chain is called only when all the users on the standard NMI_LOCAL call chain have been called and none of them have claimed this NMI. There is an exception where the NMI_LOCAL notifier chain is used. When the perf tools are in use, it's possible that the UV NMI was captured by some other NMI handler and then either ignored or mistakenly processed as a perf event. We set a per_cpu ('ping') flag for those CPUs that ignored the initial NMI, and then send them an IPI NMI signal. The NMI_LOCAL handler on each cpu does not need to read the MMR, but instead checks the in memory flag indicating it was pinged. There are two module variables, 'ping_count' indicating how many requested NMI events occurred, and 'ping_misses' indicating how many stray NMI events. These most likely are perf events so it shows the overhead of the perf NMI interrupts and how many MMR reads were avoided. This patch also minimizes the reads of the MMRs by having the first cpu entering the NMI handler on each node set a per HUB in-memory atomic value. (Having a per HUB value avoids sending lock traffic over NumaLink.) Both types of UV NMIs from the SMI layer are supported. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Hedi Berriche <hedi@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20130923212500.353547733@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-24 04:25:01 +07:00
}
/* Call possible NMI trace function */
if (unlikely(uv_trace_nmi_func))
(uv_trace_nmi_func)(reason, regs);
x86/UV: Update UV support for external NMI signals The current UV NMI handler has not been updated for the changes in the system NMI handler and the perf operations. The UV NMI handler reads an MMR in the UV Hub to check to see if the NMI event was caused by the external 'system NMI' that the operator can initiate on the System Mgmt Controller. The problem arises when the perf tools are running, causing millions of perf events per second on very large CPU count systems. Previously this was okay because the perf NMI handler ran at a higher priority on the NMI call chain and if the NMI was a perf event, it would stop calling other NMI handlers remaining on the NMI call chain. Now the system NMI handler calls all the handlers on the NMI call chain including the UV NMI handler. This causes the UV NMI handler to read the MMRs at the same millions per second rate. This can lead to significant performance loss and possible system failures. It also can cause thousands of 'Dazed and Confused' messages being sent to the system console. This effectively makes perf tools unusable on UV systems. To avoid this excessive overhead when perf tools are running, this code has been optimized to minimize reading of the MMRs as much as possible, by moving to the NMI_UNKNOWN notifier chain. This chain is called only when all the users on the standard NMI_LOCAL call chain have been called and none of them have claimed this NMI. There is an exception where the NMI_LOCAL notifier chain is used. When the perf tools are in use, it's possible that the UV NMI was captured by some other NMI handler and then either ignored or mistakenly processed as a perf event. We set a per_cpu ('ping') flag for those CPUs that ignored the initial NMI, and then send them an IPI NMI signal. The NMI_LOCAL handler on each cpu does not need to read the MMR, but instead checks the in memory flag indicating it was pinged. There are two module variables, 'ping_count' indicating how many requested NMI events occurred, and 'ping_misses' indicating how many stray NMI events. These most likely are perf events so it shows the overhead of the perf NMI interrupts and how many MMR reads were avoided. This patch also minimizes the reads of the MMRs by having the first cpu entering the NMI handler on each node set a per HUB in-memory atomic value. (Having a per HUB value avoids sending lock traffic over NumaLink.) Both types of UV NMIs from the SMI layer are supported. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Hedi Berriche <hedi@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20130923212500.353547733@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-24 04:25:01 +07:00
/* Indicate we are the first CPU into the NMI handler */
master = (atomic_read(&uv_nmi_cpu) == cpu);
/* If NMI action is "kdump", then attempt to do it */
if (uv_nmi_action_is("kdump"))
uv_nmi_kdump(cpu, master, regs);
x86/UV: Update UV support for external NMI signals The current UV NMI handler has not been updated for the changes in the system NMI handler and the perf operations. The UV NMI handler reads an MMR in the UV Hub to check to see if the NMI event was caused by the external 'system NMI' that the operator can initiate on the System Mgmt Controller. The problem arises when the perf tools are running, causing millions of perf events per second on very large CPU count systems. Previously this was okay because the perf NMI handler ran at a higher priority on the NMI call chain and if the NMI was a perf event, it would stop calling other NMI handlers remaining on the NMI call chain. Now the system NMI handler calls all the handlers on the NMI call chain including the UV NMI handler. This causes the UV NMI handler to read the MMRs at the same millions per second rate. This can lead to significant performance loss and possible system failures. It also can cause thousands of 'Dazed and Confused' messages being sent to the system console. This effectively makes perf tools unusable on UV systems. To avoid this excessive overhead when perf tools are running, this code has been optimized to minimize reading of the MMRs as much as possible, by moving to the NMI_UNKNOWN notifier chain. This chain is called only when all the users on the standard NMI_LOCAL call chain have been called and none of them have claimed this NMI. There is an exception where the NMI_LOCAL notifier chain is used. When the perf tools are in use, it's possible that the UV NMI was captured by some other NMI handler and then either ignored or mistakenly processed as a perf event. We set a per_cpu ('ping') flag for those CPUs that ignored the initial NMI, and then send them an IPI NMI signal. The NMI_LOCAL handler on each cpu does not need to read the MMR, but instead checks the in memory flag indicating it was pinged. There are two module variables, 'ping_count' indicating how many requested NMI events occurred, and 'ping_misses' indicating how many stray NMI events. These most likely are perf events so it shows the overhead of the perf NMI interrupts and how many MMR reads were avoided. This patch also minimizes the reads of the MMRs by having the first cpu entering the NMI handler on each node set a per HUB in-memory atomic value. (Having a per HUB value avoids sending lock traffic over NumaLink.) Both types of UV NMIs from the SMI layer are supported. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Hedi Berriche <hedi@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20130923212500.353547733@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-24 04:25:01 +07:00
/* Pause as all cpus enter the NMI handler */
uv_nmi_wait(master);
/* Dump state of each cpu */
if (uv_nmi_action_is("ips") || uv_nmi_action_is("dump"))
uv_nmi_dump_state(cpu, regs, master);
x86/UV: Update UV support for external NMI signals The current UV NMI handler has not been updated for the changes in the system NMI handler and the perf operations. The UV NMI handler reads an MMR in the UV Hub to check to see if the NMI event was caused by the external 'system NMI' that the operator can initiate on the System Mgmt Controller. The problem arises when the perf tools are running, causing millions of perf events per second on very large CPU count systems. Previously this was okay because the perf NMI handler ran at a higher priority on the NMI call chain and if the NMI was a perf event, it would stop calling other NMI handlers remaining on the NMI call chain. Now the system NMI handler calls all the handlers on the NMI call chain including the UV NMI handler. This causes the UV NMI handler to read the MMRs at the same millions per second rate. This can lead to significant performance loss and possible system failures. It also can cause thousands of 'Dazed and Confused' messages being sent to the system console. This effectively makes perf tools unusable on UV systems. To avoid this excessive overhead when perf tools are running, this code has been optimized to minimize reading of the MMRs as much as possible, by moving to the NMI_UNKNOWN notifier chain. This chain is called only when all the users on the standard NMI_LOCAL call chain have been called and none of them have claimed this NMI. There is an exception where the NMI_LOCAL notifier chain is used. When the perf tools are in use, it's possible that the UV NMI was captured by some other NMI handler and then either ignored or mistakenly processed as a perf event. We set a per_cpu ('ping') flag for those CPUs that ignored the initial NMI, and then send them an IPI NMI signal. The NMI_LOCAL handler on each cpu does not need to read the MMR, but instead checks the in memory flag indicating it was pinged. There are two module variables, 'ping_count' indicating how many requested NMI events occurred, and 'ping_misses' indicating how many stray NMI events. These most likely are perf events so it shows the overhead of the perf NMI interrupts and how many MMR reads were avoided. This patch also minimizes the reads of the MMRs by having the first cpu entering the NMI handler on each node set a per HUB in-memory atomic value. (Having a per HUB value avoids sending lock traffic over NumaLink.) Both types of UV NMIs from the SMI layer are supported. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Hedi Berriche <hedi@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20130923212500.353547733@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-24 04:25:01 +07:00
/* Clear per_cpu "in nmi" flag */
atomic_set(&uv_cpu_nmi.state, UV_NMI_STATE_OUT);
/* Clear MMR NMI flag on each hub */
uv_clear_nmi(cpu);
/* Clear global flags */
if (master) {
if (cpumask_weight(uv_nmi_cpu_mask))
uv_nmi_cleanup_mask();
atomic_set(&uv_nmi_cpus_in_nmi, -1);
atomic_set(&uv_nmi_cpu, -1);
atomic_set(&uv_in_nmi, 0);
}
uv_nmi_touch_watchdogs();
local_irq_restore(flags);
return NMI_HANDLED;
}
x86/UV: Update UV support for external NMI signals The current UV NMI handler has not been updated for the changes in the system NMI handler and the perf operations. The UV NMI handler reads an MMR in the UV Hub to check to see if the NMI event was caused by the external 'system NMI' that the operator can initiate on the System Mgmt Controller. The problem arises when the perf tools are running, causing millions of perf events per second on very large CPU count systems. Previously this was okay because the perf NMI handler ran at a higher priority on the NMI call chain and if the NMI was a perf event, it would stop calling other NMI handlers remaining on the NMI call chain. Now the system NMI handler calls all the handlers on the NMI call chain including the UV NMI handler. This causes the UV NMI handler to read the MMRs at the same millions per second rate. This can lead to significant performance loss and possible system failures. It also can cause thousands of 'Dazed and Confused' messages being sent to the system console. This effectively makes perf tools unusable on UV systems. To avoid this excessive overhead when perf tools are running, this code has been optimized to minimize reading of the MMRs as much as possible, by moving to the NMI_UNKNOWN notifier chain. This chain is called only when all the users on the standard NMI_LOCAL call chain have been called and none of them have claimed this NMI. There is an exception where the NMI_LOCAL notifier chain is used. When the perf tools are in use, it's possible that the UV NMI was captured by some other NMI handler and then either ignored or mistakenly processed as a perf event. We set a per_cpu ('ping') flag for those CPUs that ignored the initial NMI, and then send them an IPI NMI signal. The NMI_LOCAL handler on each cpu does not need to read the MMR, but instead checks the in memory flag indicating it was pinged. There are two module variables, 'ping_count' indicating how many requested NMI events occurred, and 'ping_misses' indicating how many stray NMI events. These most likely are perf events so it shows the overhead of the perf NMI interrupts and how many MMR reads were avoided. This patch also minimizes the reads of the MMRs by having the first cpu entering the NMI handler on each node set a per HUB in-memory atomic value. (Having a per HUB value avoids sending lock traffic over NumaLink.) Both types of UV NMIs from the SMI layer are supported. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Hedi Berriche <hedi@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20130923212500.353547733@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-24 04:25:01 +07:00
/*
* NMI handler for pulling in CPUs when perf events are grabbing our NMI
*/
int uv_handle_nmi_ping(unsigned int reason, struct pt_regs *regs)
{
int ret;
uv_cpu_nmi.queries++;
if (!atomic_read(&uv_cpu_nmi.pinging)) {
local64_inc(&uv_nmi_ping_misses);
return NMI_DONE;
}
uv_cpu_nmi.pings++;
local64_inc(&uv_nmi_ping_count);
ret = uv_handle_nmi(reason, regs);
atomic_set(&uv_cpu_nmi.pinging, 0);
return ret;
}
void uv_register_nmi_notifier(void)
{
if (register_nmi_handler(NMI_UNKNOWN, uv_handle_nmi, 0, "uv"))
x86/UV: Update UV support for external NMI signals The current UV NMI handler has not been updated for the changes in the system NMI handler and the perf operations. The UV NMI handler reads an MMR in the UV Hub to check to see if the NMI event was caused by the external 'system NMI' that the operator can initiate on the System Mgmt Controller. The problem arises when the perf tools are running, causing millions of perf events per second on very large CPU count systems. Previously this was okay because the perf NMI handler ran at a higher priority on the NMI call chain and if the NMI was a perf event, it would stop calling other NMI handlers remaining on the NMI call chain. Now the system NMI handler calls all the handlers on the NMI call chain including the UV NMI handler. This causes the UV NMI handler to read the MMRs at the same millions per second rate. This can lead to significant performance loss and possible system failures. It also can cause thousands of 'Dazed and Confused' messages being sent to the system console. This effectively makes perf tools unusable on UV systems. To avoid this excessive overhead when perf tools are running, this code has been optimized to minimize reading of the MMRs as much as possible, by moving to the NMI_UNKNOWN notifier chain. This chain is called only when all the users on the standard NMI_LOCAL call chain have been called and none of them have claimed this NMI. There is an exception where the NMI_LOCAL notifier chain is used. When the perf tools are in use, it's possible that the UV NMI was captured by some other NMI handler and then either ignored or mistakenly processed as a perf event. We set a per_cpu ('ping') flag for those CPUs that ignored the initial NMI, and then send them an IPI NMI signal. The NMI_LOCAL handler on each cpu does not need to read the MMR, but instead checks the in memory flag indicating it was pinged. There are two module variables, 'ping_count' indicating how many requested NMI events occurred, and 'ping_misses' indicating how many stray NMI events. These most likely are perf events so it shows the overhead of the perf NMI interrupts and how many MMR reads were avoided. This patch also minimizes the reads of the MMRs by having the first cpu entering the NMI handler on each node set a per HUB in-memory atomic value. (Having a per HUB value avoids sending lock traffic over NumaLink.) Both types of UV NMIs from the SMI layer are supported. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Hedi Berriche <hedi@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20130923212500.353547733@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-24 04:25:01 +07:00
pr_warn("UV: NMI handler failed to register\n");
if (register_nmi_handler(NMI_LOCAL, uv_handle_nmi_ping, 0, "uvping"))
pr_warn("UV: PING NMI handler failed to register\n");
}
void uv_nmi_init(void)
{
unsigned int value;
/*
* Unmask NMI on all cpus
*/
value = apic_read(APIC_LVT1) | APIC_DM_NMI;
value &= ~APIC_LVT_MASKED;
apic_write(APIC_LVT1, value);
}
x86/UV: Update UV support for external NMI signals The current UV NMI handler has not been updated for the changes in the system NMI handler and the perf operations. The UV NMI handler reads an MMR in the UV Hub to check to see if the NMI event was caused by the external 'system NMI' that the operator can initiate on the System Mgmt Controller. The problem arises when the perf tools are running, causing millions of perf events per second on very large CPU count systems. Previously this was okay because the perf NMI handler ran at a higher priority on the NMI call chain and if the NMI was a perf event, it would stop calling other NMI handlers remaining on the NMI call chain. Now the system NMI handler calls all the handlers on the NMI call chain including the UV NMI handler. This causes the UV NMI handler to read the MMRs at the same millions per second rate. This can lead to significant performance loss and possible system failures. It also can cause thousands of 'Dazed and Confused' messages being sent to the system console. This effectively makes perf tools unusable on UV systems. To avoid this excessive overhead when perf tools are running, this code has been optimized to minimize reading of the MMRs as much as possible, by moving to the NMI_UNKNOWN notifier chain. This chain is called only when all the users on the standard NMI_LOCAL call chain have been called and none of them have claimed this NMI. There is an exception where the NMI_LOCAL notifier chain is used. When the perf tools are in use, it's possible that the UV NMI was captured by some other NMI handler and then either ignored or mistakenly processed as a perf event. We set a per_cpu ('ping') flag for those CPUs that ignored the initial NMI, and then send them an IPI NMI signal. The NMI_LOCAL handler on each cpu does not need to read the MMR, but instead checks the in memory flag indicating it was pinged. There are two module variables, 'ping_count' indicating how many requested NMI events occurred, and 'ping_misses' indicating how many stray NMI events. These most likely are perf events so it shows the overhead of the perf NMI interrupts and how many MMR reads were avoided. This patch also minimizes the reads of the MMRs by having the first cpu entering the NMI handler on each node set a per HUB in-memory atomic value. (Having a per HUB value avoids sending lock traffic over NumaLink.) Both types of UV NMIs from the SMI layer are supported. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Hedi Berriche <hedi@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20130923212500.353547733@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-24 04:25:01 +07:00
void uv_nmi_setup(void)
{
int size = sizeof(void *) * (1 << NODES_SHIFT);
int cpu, nid;
/* Setup hub nmi info */
uv_nmi_setup_mmrs();
uv_hub_nmi_list = kzalloc(size, GFP_KERNEL);
pr_info("UV: NMI hub list @ 0x%p (%d)\n", uv_hub_nmi_list, size);
BUG_ON(!uv_hub_nmi_list);
size = sizeof(struct uv_hub_nmi_s);
for_each_present_cpu(cpu) {
nid = cpu_to_node(cpu);
if (uv_hub_nmi_list[nid] == NULL) {
uv_hub_nmi_list[nid] = kzalloc_node(size,
GFP_KERNEL, nid);
BUG_ON(!uv_hub_nmi_list[nid]);
raw_spin_lock_init(&(uv_hub_nmi_list[nid]->nmi_lock));
atomic_set(&uv_hub_nmi_list[nid]->cpu_owner, -1);
}
uv_hub_nmi_per(cpu) = uv_hub_nmi_list[nid];
}
BUG_ON(!alloc_cpumask_var(&uv_nmi_cpu_mask, GFP_KERNEL));
x86/UV: Update UV support for external NMI signals The current UV NMI handler has not been updated for the changes in the system NMI handler and the perf operations. The UV NMI handler reads an MMR in the UV Hub to check to see if the NMI event was caused by the external 'system NMI' that the operator can initiate on the System Mgmt Controller. The problem arises when the perf tools are running, causing millions of perf events per second on very large CPU count systems. Previously this was okay because the perf NMI handler ran at a higher priority on the NMI call chain and if the NMI was a perf event, it would stop calling other NMI handlers remaining on the NMI call chain. Now the system NMI handler calls all the handlers on the NMI call chain including the UV NMI handler. This causes the UV NMI handler to read the MMRs at the same millions per second rate. This can lead to significant performance loss and possible system failures. It also can cause thousands of 'Dazed and Confused' messages being sent to the system console. This effectively makes perf tools unusable on UV systems. To avoid this excessive overhead when perf tools are running, this code has been optimized to minimize reading of the MMRs as much as possible, by moving to the NMI_UNKNOWN notifier chain. This chain is called only when all the users on the standard NMI_LOCAL call chain have been called and none of them have claimed this NMI. There is an exception where the NMI_LOCAL notifier chain is used. When the perf tools are in use, it's possible that the UV NMI was captured by some other NMI handler and then either ignored or mistakenly processed as a perf event. We set a per_cpu ('ping') flag for those CPUs that ignored the initial NMI, and then send them an IPI NMI signal. The NMI_LOCAL handler on each cpu does not need to read the MMR, but instead checks the in memory flag indicating it was pinged. There are two module variables, 'ping_count' indicating how many requested NMI events occurred, and 'ping_misses' indicating how many stray NMI events. These most likely are perf events so it shows the overhead of the perf NMI interrupts and how many MMR reads were avoided. This patch also minimizes the reads of the MMRs by having the first cpu entering the NMI handler on each node set a per HUB in-memory atomic value. (Having a per HUB value avoids sending lock traffic over NumaLink.) Both types of UV NMIs from the SMI layer are supported. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Hedi Berriche <hedi@sgi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20130923212500.353547733@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-24 04:25:01 +07:00
}