2019-02-21 22:46:34 +07:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
/*
|
|
|
|
* Copyright (c) 2016-2019, NVIDIA CORPORATION. All rights reserved.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/io.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/of.h>
|
|
|
|
#include <linux/phy/phy.h>
|
|
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/clk.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
|
|
|
|
#include <soc/tegra/fuse.h>
|
|
|
|
|
|
|
|
#include "xusb.h"
|
|
|
|
|
|
|
|
/* FUSE USB_CALIB registers */
|
|
|
|
#define HS_CURR_LEVEL_PADX_SHIFT(x) ((x) ? (11 + (x - 1) * 6) : 0)
|
|
|
|
#define HS_CURR_LEVEL_PAD_MASK 0x3f
|
|
|
|
#define HS_TERM_RANGE_ADJ_SHIFT 7
|
|
|
|
#define HS_TERM_RANGE_ADJ_MASK 0xf
|
|
|
|
#define HS_SQUELCH_SHIFT 29
|
|
|
|
#define HS_SQUELCH_MASK 0x7
|
|
|
|
|
|
|
|
#define RPD_CTRL_SHIFT 0
|
|
|
|
#define RPD_CTRL_MASK 0x1f
|
|
|
|
|
|
|
|
/* XUSB PADCTL registers */
|
|
|
|
#define XUSB_PADCTL_USB2_PAD_MUX 0x4
|
|
|
|
#define USB2_PORT_SHIFT(x) ((x) * 2)
|
|
|
|
#define USB2_PORT_MASK 0x3
|
|
|
|
#define PORT_XUSB 1
|
|
|
|
#define HSIC_PORT_SHIFT(x) ((x) + 20)
|
|
|
|
#define HSIC_PORT_MASK 0x1
|
|
|
|
#define PORT_HSIC 0
|
|
|
|
|
|
|
|
#define XUSB_PADCTL_USB2_PORT_CAP 0x8
|
|
|
|
#define XUSB_PADCTL_SS_PORT_CAP 0xc
|
|
|
|
#define PORTX_CAP_SHIFT(x) ((x) * 4)
|
|
|
|
#define PORT_CAP_MASK 0x3
|
|
|
|
#define PORT_CAP_DISABLED 0x0
|
|
|
|
#define PORT_CAP_HOST 0x1
|
|
|
|
#define PORT_CAP_DEVICE 0x2
|
|
|
|
#define PORT_CAP_OTG 0x3
|
|
|
|
|
|
|
|
#define XUSB_PADCTL_ELPG_PROGRAM 0x20
|
|
|
|
#define USB2_PORT_WAKE_INTERRUPT_ENABLE(x) BIT(x)
|
|
|
|
#define USB2_PORT_WAKEUP_EVENT(x) BIT((x) + 7)
|
|
|
|
#define SS_PORT_WAKE_INTERRUPT_ENABLE(x) BIT((x) + 14)
|
|
|
|
#define SS_PORT_WAKEUP_EVENT(x) BIT((x) + 21)
|
|
|
|
#define USB2_HSIC_PORT_WAKE_INTERRUPT_ENABLE(x) BIT((x) + 28)
|
|
|
|
#define USB2_HSIC_PORT_WAKEUP_EVENT(x) BIT((x) + 30)
|
|
|
|
#define ALL_WAKE_EVENTS \
|
|
|
|
(USB2_PORT_WAKEUP_EVENT(0) | USB2_PORT_WAKEUP_EVENT(1) | \
|
|
|
|
USB2_PORT_WAKEUP_EVENT(2) | SS_PORT_WAKEUP_EVENT(0) | \
|
|
|
|
SS_PORT_WAKEUP_EVENT(1) | SS_PORT_WAKEUP_EVENT(2) | \
|
|
|
|
USB2_HSIC_PORT_WAKEUP_EVENT(0))
|
|
|
|
|
|
|
|
#define XUSB_PADCTL_ELPG_PROGRAM_1 0x24
|
|
|
|
#define SSPX_ELPG_CLAMP_EN(x) BIT(0 + (x) * 3)
|
|
|
|
#define SSPX_ELPG_CLAMP_EN_EARLY(x) BIT(1 + (x) * 3)
|
|
|
|
#define SSPX_ELPG_VCORE_DOWN(x) BIT(2 + (x) * 3)
|
2020-02-12 13:11:30 +07:00
|
|
|
#define XUSB_PADCTL_SS_PORT_CFG 0x2c
|
|
|
|
#define PORTX_SPEED_SUPPORT_SHIFT(x) ((x) * 4)
|
|
|
|
#define PORTX_SPEED_SUPPORT_MASK (0x3)
|
|
|
|
#define PORT_SPEED_SUPPORT_GEN1 (0x0)
|
2019-02-21 22:46:34 +07:00
|
|
|
|
|
|
|
#define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x) (0x88 + (x) * 0x40)
|
|
|
|
#define HS_CURR_LEVEL(x) ((x) & 0x3f)
|
|
|
|
#define TERM_SEL BIT(25)
|
|
|
|
#define USB2_OTG_PD BIT(26)
|
|
|
|
#define USB2_OTG_PD2 BIT(27)
|
|
|
|
#define USB2_OTG_PD2_OVRD_EN BIT(28)
|
|
|
|
#define USB2_OTG_PD_ZI BIT(29)
|
|
|
|
|
|
|
|
#define XUSB_PADCTL_USB2_OTG_PADX_CTL1(x) (0x8c + (x) * 0x40)
|
|
|
|
#define USB2_OTG_PD_DR BIT(2)
|
|
|
|
#define TERM_RANGE_ADJ(x) (((x) & 0xf) << 3)
|
|
|
|
#define RPD_CTRL(x) (((x) & 0x1f) << 26)
|
|
|
|
|
|
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL0 0x284
|
|
|
|
#define BIAS_PAD_PD BIT(11)
|
|
|
|
#define HS_SQUELCH_LEVEL(x) (((x) & 0x7) << 0)
|
|
|
|
|
|
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL1 0x288
|
|
|
|
#define USB2_TRK_START_TIMER(x) (((x) & 0x7f) << 12)
|
|
|
|
#define USB2_TRK_DONE_RESET_TIMER(x) (((x) & 0x7f) << 19)
|
|
|
|
#define USB2_PD_TRK BIT(26)
|
|
|
|
|
|
|
|
#define XUSB_PADCTL_HSIC_PADX_CTL0(x) (0x300 + (x) * 0x20)
|
|
|
|
#define HSIC_PD_TX_DATA0 BIT(1)
|
|
|
|
#define HSIC_PD_TX_STROBE BIT(3)
|
|
|
|
#define HSIC_PD_RX_DATA0 BIT(4)
|
|
|
|
#define HSIC_PD_RX_STROBE BIT(6)
|
|
|
|
#define HSIC_PD_ZI_DATA0 BIT(7)
|
|
|
|
#define HSIC_PD_ZI_STROBE BIT(9)
|
|
|
|
#define HSIC_RPD_DATA0 BIT(13)
|
|
|
|
#define HSIC_RPD_STROBE BIT(15)
|
|
|
|
#define HSIC_RPU_DATA0 BIT(16)
|
|
|
|
#define HSIC_RPU_STROBE BIT(18)
|
|
|
|
|
|
|
|
#define XUSB_PADCTL_HSIC_PAD_TRK_CTL0 0x340
|
|
|
|
#define HSIC_TRK_START_TIMER(x) (((x) & 0x7f) << 5)
|
|
|
|
#define HSIC_TRK_DONE_RESET_TIMER(x) (((x) & 0x7f) << 12)
|
|
|
|
#define HSIC_PD_TRK BIT(19)
|
|
|
|
|
|
|
|
#define USB2_VBUS_ID 0x360
|
|
|
|
#define VBUS_OVERRIDE BIT(14)
|
|
|
|
#define ID_OVERRIDE(x) (((x) & 0xf) << 18)
|
|
|
|
#define ID_OVERRIDE_FLOATING ID_OVERRIDE(8)
|
|
|
|
#define ID_OVERRIDE_GROUNDED ID_OVERRIDE(0)
|
|
|
|
|
|
|
|
#define TEGRA186_LANE(_name, _offset, _shift, _mask, _type) \
|
|
|
|
{ \
|
|
|
|
.name = _name, \
|
|
|
|
.offset = _offset, \
|
|
|
|
.shift = _shift, \
|
|
|
|
.mask = _mask, \
|
|
|
|
.num_funcs = ARRAY_SIZE(tegra186_##_type##_functions), \
|
|
|
|
.funcs = tegra186_##_type##_functions, \
|
|
|
|
}
|
|
|
|
|
|
|
|
struct tegra_xusb_fuse_calibration {
|
|
|
|
u32 *hs_curr_level;
|
|
|
|
u32 hs_squelch;
|
|
|
|
u32 hs_term_range_adj;
|
|
|
|
u32 rpd_ctrl;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct tegra186_xusb_padctl {
|
|
|
|
struct tegra_xusb_padctl base;
|
|
|
|
|
|
|
|
struct tegra_xusb_fuse_calibration calib;
|
|
|
|
|
|
|
|
/* UTMI bias and tracking */
|
|
|
|
struct clk *usb2_trk_clk;
|
|
|
|
unsigned int bias_pad_enable;
|
|
|
|
};
|
|
|
|
|
|
|
|
static inline struct tegra186_xusb_padctl *
|
|
|
|
to_tegra186_xusb_padctl(struct tegra_xusb_padctl *padctl)
|
|
|
|
{
|
|
|
|
return container_of(padctl, struct tegra186_xusb_padctl, base);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* USB 2.0 UTMI PHY support */
|
|
|
|
static struct tegra_xusb_lane *
|
|
|
|
tegra186_usb2_lane_probe(struct tegra_xusb_pad *pad, struct device_node *np,
|
|
|
|
unsigned int index)
|
|
|
|
{
|
|
|
|
struct tegra_xusb_usb2_lane *usb2;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
usb2 = kzalloc(sizeof(*usb2), GFP_KERNEL);
|
|
|
|
if (!usb2)
|
|
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
|
|
|
|
INIT_LIST_HEAD(&usb2->base.list);
|
|
|
|
usb2->base.soc = &pad->soc->lanes[index];
|
|
|
|
usb2->base.index = index;
|
|
|
|
usb2->base.pad = pad;
|
|
|
|
usb2->base.np = np;
|
|
|
|
|
|
|
|
err = tegra_xusb_lane_parse_dt(&usb2->base, np);
|
|
|
|
if (err < 0) {
|
|
|
|
kfree(usb2);
|
|
|
|
return ERR_PTR(err);
|
|
|
|
}
|
|
|
|
|
|
|
|
return &usb2->base;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void tegra186_usb2_lane_remove(struct tegra_xusb_lane *lane)
|
|
|
|
{
|
|
|
|
struct tegra_xusb_usb2_lane *usb2 = to_usb2_lane(lane);
|
|
|
|
|
|
|
|
kfree(usb2);
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct tegra_xusb_lane_ops tegra186_usb2_lane_ops = {
|
|
|
|
.probe = tegra186_usb2_lane_probe,
|
|
|
|
.remove = tegra186_usb2_lane_remove,
|
|
|
|
};
|
|
|
|
|
|
|
|
static void tegra186_utmi_bias_pad_power_on(struct tegra_xusb_padctl *padctl)
|
|
|
|
{
|
|
|
|
struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl);
|
|
|
|
struct device *dev = padctl->dev;
|
|
|
|
u32 value;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
mutex_lock(&padctl->lock);
|
|
|
|
|
|
|
|
if (priv->bias_pad_enable++ > 0) {
|
|
|
|
mutex_unlock(&padctl->lock);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
err = clk_prepare_enable(priv->usb2_trk_clk);
|
|
|
|
if (err < 0)
|
|
|
|
dev_warn(dev, "failed to enable USB2 trk clock: %d\n", err);
|
|
|
|
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
|
|
|
|
value &= ~USB2_TRK_START_TIMER(~0);
|
|
|
|
value |= USB2_TRK_START_TIMER(0x1e);
|
|
|
|
value &= ~USB2_TRK_DONE_RESET_TIMER(~0);
|
|
|
|
value |= USB2_TRK_DONE_RESET_TIMER(0xa);
|
|
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
|
|
|
|
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
|
|
|
|
value &= ~BIAS_PAD_PD;
|
|
|
|
value &= ~HS_SQUELCH_LEVEL(~0);
|
|
|
|
value |= HS_SQUELCH_LEVEL(priv->calib.hs_squelch);
|
|
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
|
|
|
|
|
|
|
|
udelay(1);
|
|
|
|
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
|
|
|
|
value &= ~USB2_PD_TRK;
|
|
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
|
|
|
|
|
|
|
|
mutex_unlock(&padctl->lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void tegra186_utmi_bias_pad_power_off(struct tegra_xusb_padctl *padctl)
|
|
|
|
{
|
|
|
|
struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl);
|
|
|
|
u32 value;
|
|
|
|
|
|
|
|
mutex_lock(&padctl->lock);
|
|
|
|
|
|
|
|
if (WARN_ON(priv->bias_pad_enable == 0)) {
|
|
|
|
mutex_unlock(&padctl->lock);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (--priv->bias_pad_enable > 0) {
|
|
|
|
mutex_unlock(&padctl->lock);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
|
|
|
|
value |= USB2_PD_TRK;
|
|
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
|
|
|
|
|
|
|
|
clk_disable_unprepare(priv->usb2_trk_clk);
|
|
|
|
|
|
|
|
mutex_unlock(&padctl->lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void tegra_phy_xusb_utmi_pad_power_on(struct phy *phy)
|
|
|
|
{
|
|
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
|
|
struct tegra_xusb_usb2_port *port;
|
|
|
|
struct device *dev = padctl->dev;
|
|
|
|
unsigned int index = lane->index;
|
|
|
|
u32 value;
|
|
|
|
|
|
|
|
if (!phy)
|
|
|
|
return;
|
|
|
|
|
|
|
|
port = tegra_xusb_find_usb2_port(padctl, index);
|
|
|
|
if (!port) {
|
|
|
|
dev_err(dev, "no port found for USB2 lane %u\n", index);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
tegra186_utmi_bias_pad_power_on(padctl);
|
|
|
|
|
|
|
|
udelay(2);
|
|
|
|
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
|
|
|
|
value &= ~USB2_OTG_PD;
|
|
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
|
|
|
|
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
|
|
|
|
value &= ~USB2_OTG_PD_DR;
|
|
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
|
|
|
|
}
|
|
|
|
|
|
|
|
static void tegra_phy_xusb_utmi_pad_power_down(struct phy *phy)
|
|
|
|
{
|
|
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
|
|
unsigned int index = lane->index;
|
|
|
|
u32 value;
|
|
|
|
|
|
|
|
if (!phy)
|
|
|
|
return;
|
|
|
|
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
|
|
|
|
value |= USB2_OTG_PD;
|
|
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
|
|
|
|
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
|
|
|
|
value |= USB2_OTG_PD_DR;
|
|
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
|
|
|
|
|
|
|
|
udelay(2);
|
|
|
|
|
|
|
|
tegra186_utmi_bias_pad_power_off(padctl);
|
|
|
|
}
|
|
|
|
|
2020-02-10 15:11:33 +07:00
|
|
|
static int tegra186_xusb_padctl_vbus_override(struct tegra_xusb_padctl *padctl,
|
|
|
|
bool status)
|
|
|
|
{
|
|
|
|
u32 value;
|
|
|
|
|
|
|
|
dev_dbg(padctl->dev, "%s vbus override\n", status ? "set" : "clear");
|
|
|
|
|
|
|
|
value = padctl_readl(padctl, USB2_VBUS_ID);
|
|
|
|
|
|
|
|
if (status) {
|
|
|
|
value |= VBUS_OVERRIDE;
|
|
|
|
value &= ~ID_OVERRIDE(~0);
|
|
|
|
value |= ID_OVERRIDE_FLOATING;
|
|
|
|
} else {
|
|
|
|
value &= ~VBUS_OVERRIDE;
|
|
|
|
}
|
|
|
|
|
|
|
|
padctl_writel(padctl, value, USB2_VBUS_ID);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int tegra186_xusb_padctl_id_override(struct tegra_xusb_padctl *padctl,
|
|
|
|
bool status)
|
|
|
|
{
|
|
|
|
u32 value;
|
|
|
|
|
|
|
|
dev_dbg(padctl->dev, "%s id override\n", status ? "set" : "clear");
|
|
|
|
|
|
|
|
value = padctl_readl(padctl, USB2_VBUS_ID);
|
|
|
|
|
|
|
|
if (status) {
|
|
|
|
if (value & VBUS_OVERRIDE) {
|
|
|
|
value &= ~VBUS_OVERRIDE;
|
|
|
|
padctl_writel(padctl, value, USB2_VBUS_ID);
|
|
|
|
usleep_range(1000, 2000);
|
|
|
|
|
|
|
|
value = padctl_readl(padctl, USB2_VBUS_ID);
|
|
|
|
}
|
|
|
|
|
|
|
|
value &= ~ID_OVERRIDE(~0);
|
|
|
|
value |= ID_OVERRIDE_GROUNDED;
|
|
|
|
} else {
|
|
|
|
value &= ~ID_OVERRIDE(~0);
|
|
|
|
value |= ID_OVERRIDE_FLOATING;
|
|
|
|
}
|
|
|
|
|
|
|
|
padctl_writel(padctl, value, USB2_VBUS_ID);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int tegra186_utmi_phy_set_mode(struct phy *phy, enum phy_mode mode,
|
|
|
|
int submode)
|
|
|
|
{
|
|
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
|
|
struct tegra_xusb_usb2_port *port = tegra_xusb_find_usb2_port(padctl,
|
|
|
|
lane->index);
|
|
|
|
int err = 0;
|
|
|
|
|
|
|
|
mutex_lock(&padctl->lock);
|
|
|
|
|
|
|
|
dev_dbg(&port->base.dev, "%s: mode %d", __func__, mode);
|
|
|
|
|
|
|
|
if (mode == PHY_MODE_USB_OTG) {
|
|
|
|
if (submode == USB_ROLE_HOST) {
|
|
|
|
tegra186_xusb_padctl_id_override(padctl, true);
|
|
|
|
|
|
|
|
err = regulator_enable(port->supply);
|
|
|
|
} else if (submode == USB_ROLE_DEVICE) {
|
|
|
|
tegra186_xusb_padctl_vbus_override(padctl, true);
|
|
|
|
} else if (submode == USB_ROLE_NONE) {
|
|
|
|
/*
|
|
|
|
* When port is peripheral only or role transitions to
|
|
|
|
* USB_ROLE_NONE from USB_ROLE_DEVICE, regulator is not
|
|
|
|
* enabled.
|
|
|
|
*/
|
|
|
|
if (regulator_is_enabled(port->supply))
|
|
|
|
regulator_disable(port->supply);
|
|
|
|
|
|
|
|
tegra186_xusb_padctl_id_override(padctl, false);
|
|
|
|
tegra186_xusb_padctl_vbus_override(padctl, false);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
mutex_unlock(&padctl->lock);
|
|
|
|
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2019-02-21 22:46:34 +07:00
|
|
|
static int tegra186_utmi_phy_power_on(struct phy *phy)
|
|
|
|
{
|
|
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
|
|
struct tegra_xusb_usb2_lane *usb2 = to_usb2_lane(lane);
|
|
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
|
|
struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl);
|
|
|
|
struct tegra_xusb_usb2_port *port;
|
|
|
|
unsigned int index = lane->index;
|
|
|
|
struct device *dev = padctl->dev;
|
|
|
|
u32 value;
|
|
|
|
|
|
|
|
port = tegra_xusb_find_usb2_port(padctl, index);
|
|
|
|
if (!port) {
|
|
|
|
dev_err(dev, "no port found for USB2 lane %u\n", index);
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_PAD_MUX);
|
|
|
|
value &= ~(USB2_PORT_MASK << USB2_PORT_SHIFT(index));
|
|
|
|
value |= (PORT_XUSB << USB2_PORT_SHIFT(index));
|
|
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_PAD_MUX);
|
|
|
|
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_PORT_CAP);
|
|
|
|
value &= ~(PORT_CAP_MASK << PORTX_CAP_SHIFT(index));
|
|
|
|
|
|
|
|
if (port->mode == USB_DR_MODE_UNKNOWN)
|
|
|
|
value |= (PORT_CAP_DISABLED << PORTX_CAP_SHIFT(index));
|
|
|
|
else if (port->mode == USB_DR_MODE_PERIPHERAL)
|
|
|
|
value |= (PORT_CAP_DEVICE << PORTX_CAP_SHIFT(index));
|
|
|
|
else if (port->mode == USB_DR_MODE_HOST)
|
|
|
|
value |= (PORT_CAP_HOST << PORTX_CAP_SHIFT(index));
|
|
|
|
else if (port->mode == USB_DR_MODE_OTG)
|
|
|
|
value |= (PORT_CAP_OTG << PORTX_CAP_SHIFT(index));
|
|
|
|
|
|
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_PORT_CAP);
|
|
|
|
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
|
|
|
|
value &= ~USB2_OTG_PD_ZI;
|
|
|
|
value |= TERM_SEL;
|
|
|
|
value &= ~HS_CURR_LEVEL(~0);
|
|
|
|
|
|
|
|
if (usb2->hs_curr_level_offset) {
|
|
|
|
int hs_current_level;
|
|
|
|
|
|
|
|
hs_current_level = (int)priv->calib.hs_curr_level[index] +
|
|
|
|
usb2->hs_curr_level_offset;
|
|
|
|
|
|
|
|
if (hs_current_level < 0)
|
|
|
|
hs_current_level = 0;
|
|
|
|
if (hs_current_level > 0x3f)
|
|
|
|
hs_current_level = 0x3f;
|
|
|
|
|
|
|
|
value |= HS_CURR_LEVEL(hs_current_level);
|
|
|
|
} else {
|
|
|
|
value |= HS_CURR_LEVEL(priv->calib.hs_curr_level[index]);
|
|
|
|
}
|
|
|
|
|
|
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
|
|
|
|
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
|
|
|
|
value &= ~TERM_RANGE_ADJ(~0);
|
|
|
|
value |= TERM_RANGE_ADJ(priv->calib.hs_term_range_adj);
|
|
|
|
value &= ~RPD_CTRL(~0);
|
|
|
|
value |= RPD_CTRL(priv->calib.rpd_ctrl);
|
|
|
|
padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
|
|
|
|
|
|
|
|
/* TODO: pad power saving */
|
|
|
|
tegra_phy_xusb_utmi_pad_power_on(phy);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int tegra186_utmi_phy_power_off(struct phy *phy)
|
|
|
|
{
|
|
|
|
/* TODO: pad power saving */
|
|
|
|
tegra_phy_xusb_utmi_pad_power_down(phy);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int tegra186_utmi_phy_init(struct phy *phy)
|
|
|
|
{
|
|
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
|
|
struct tegra_xusb_usb2_port *port;
|
|
|
|
unsigned int index = lane->index;
|
|
|
|
struct device *dev = padctl->dev;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
port = tegra_xusb_find_usb2_port(padctl, index);
|
|
|
|
if (!port) {
|
|
|
|
dev_err(dev, "no port found for USB2 lane %u\n", index);
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (port->supply && port->mode == USB_DR_MODE_HOST) {
|
|
|
|
err = regulator_enable(port->supply);
|
|
|
|
if (err) {
|
|
|
|
dev_err(dev, "failed to enable port %u VBUS: %d\n",
|
|
|
|
index, err);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int tegra186_utmi_phy_exit(struct phy *phy)
|
|
|
|
{
|
|
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
|
|
struct tegra_xusb_usb2_port *port;
|
|
|
|
unsigned int index = lane->index;
|
|
|
|
struct device *dev = padctl->dev;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
port = tegra_xusb_find_usb2_port(padctl, index);
|
|
|
|
if (!port) {
|
|
|
|
dev_err(dev, "no port found for USB2 lane %u\n", index);
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (port->supply && port->mode == USB_DR_MODE_HOST) {
|
|
|
|
err = regulator_disable(port->supply);
|
|
|
|
if (err) {
|
|
|
|
dev_err(dev, "failed to disable port %u VBUS: %d\n",
|
|
|
|
index, err);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct phy_ops utmi_phy_ops = {
|
|
|
|
.init = tegra186_utmi_phy_init,
|
|
|
|
.exit = tegra186_utmi_phy_exit,
|
|
|
|
.power_on = tegra186_utmi_phy_power_on,
|
|
|
|
.power_off = tegra186_utmi_phy_power_off,
|
2020-02-10 15:11:33 +07:00
|
|
|
.set_mode = tegra186_utmi_phy_set_mode,
|
2019-02-21 22:46:34 +07:00
|
|
|
.owner = THIS_MODULE,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct tegra_xusb_pad *
|
|
|
|
tegra186_usb2_pad_probe(struct tegra_xusb_padctl *padctl,
|
|
|
|
const struct tegra_xusb_pad_soc *soc,
|
|
|
|
struct device_node *np)
|
|
|
|
{
|
|
|
|
struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl);
|
|
|
|
struct tegra_xusb_usb2_pad *usb2;
|
|
|
|
struct tegra_xusb_pad *pad;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
usb2 = kzalloc(sizeof(*usb2), GFP_KERNEL);
|
|
|
|
if (!usb2)
|
|
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
|
|
|
|
pad = &usb2->base;
|
|
|
|
pad->ops = &tegra186_usb2_lane_ops;
|
|
|
|
pad->soc = soc;
|
|
|
|
|
|
|
|
err = tegra_xusb_pad_init(pad, padctl, np);
|
|
|
|
if (err < 0) {
|
|
|
|
kfree(usb2);
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
priv->usb2_trk_clk = devm_clk_get(&pad->dev, "trk");
|
|
|
|
if (IS_ERR(priv->usb2_trk_clk)) {
|
|
|
|
err = PTR_ERR(priv->usb2_trk_clk);
|
|
|
|
dev_dbg(&pad->dev, "failed to get usb2 trk clock: %d\n", err);
|
|
|
|
goto unregister;
|
|
|
|
}
|
|
|
|
|
|
|
|
err = tegra_xusb_pad_register(pad, &utmi_phy_ops);
|
|
|
|
if (err < 0)
|
|
|
|
goto unregister;
|
|
|
|
|
|
|
|
dev_set_drvdata(&pad->dev, pad);
|
|
|
|
|
|
|
|
return pad;
|
|
|
|
|
|
|
|
unregister:
|
|
|
|
device_unregister(&pad->dev);
|
|
|
|
out:
|
|
|
|
return ERR_PTR(err);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void tegra186_usb2_pad_remove(struct tegra_xusb_pad *pad)
|
|
|
|
{
|
|
|
|
struct tegra_xusb_usb2_pad *usb2 = to_usb2_pad(pad);
|
|
|
|
|
|
|
|
kfree(usb2);
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct tegra_xusb_pad_ops tegra186_usb2_pad_ops = {
|
|
|
|
.probe = tegra186_usb2_pad_probe,
|
|
|
|
.remove = tegra186_usb2_pad_remove,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const char * const tegra186_usb2_functions[] = {
|
|
|
|
"xusb",
|
|
|
|
};
|
|
|
|
|
|
|
|
static int tegra186_usb2_port_enable(struct tegra_xusb_port *port)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void tegra186_usb2_port_disable(struct tegra_xusb_port *port)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct tegra_xusb_lane *
|
|
|
|
tegra186_usb2_port_map(struct tegra_xusb_port *port)
|
|
|
|
{
|
|
|
|
return tegra_xusb_find_lane(port->padctl, "usb2", port->index);
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct tegra_xusb_port_ops tegra186_usb2_port_ops = {
|
2020-03-19 17:52:13 +07:00
|
|
|
.release = tegra_xusb_usb2_port_release,
|
2020-03-19 05:25:54 +07:00
|
|
|
.remove = tegra_xusb_usb2_port_remove,
|
2019-02-21 22:46:34 +07:00
|
|
|
.enable = tegra186_usb2_port_enable,
|
|
|
|
.disable = tegra186_usb2_port_disable,
|
|
|
|
.map = tegra186_usb2_port_map,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* SuperSpeed PHY support */
|
|
|
|
static struct tegra_xusb_lane *
|
|
|
|
tegra186_usb3_lane_probe(struct tegra_xusb_pad *pad, struct device_node *np,
|
|
|
|
unsigned int index)
|
|
|
|
{
|
|
|
|
struct tegra_xusb_usb3_lane *usb3;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
usb3 = kzalloc(sizeof(*usb3), GFP_KERNEL);
|
|
|
|
if (!usb3)
|
|
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
|
|
|
|
INIT_LIST_HEAD(&usb3->base.list);
|
|
|
|
usb3->base.soc = &pad->soc->lanes[index];
|
|
|
|
usb3->base.index = index;
|
|
|
|
usb3->base.pad = pad;
|
|
|
|
usb3->base.np = np;
|
|
|
|
|
|
|
|
err = tegra_xusb_lane_parse_dt(&usb3->base, np);
|
|
|
|
if (err < 0) {
|
|
|
|
kfree(usb3);
|
|
|
|
return ERR_PTR(err);
|
|
|
|
}
|
|
|
|
|
|
|
|
return &usb3->base;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void tegra186_usb3_lane_remove(struct tegra_xusb_lane *lane)
|
|
|
|
{
|
|
|
|
struct tegra_xusb_usb3_lane *usb3 = to_usb3_lane(lane);
|
|
|
|
|
|
|
|
kfree(usb3);
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct tegra_xusb_lane_ops tegra186_usb3_lane_ops = {
|
|
|
|
.probe = tegra186_usb3_lane_probe,
|
|
|
|
.remove = tegra186_usb3_lane_remove,
|
|
|
|
};
|
|
|
|
static int tegra186_usb3_port_enable(struct tegra_xusb_port *port)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void tegra186_usb3_port_disable(struct tegra_xusb_port *port)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct tegra_xusb_lane *
|
|
|
|
tegra186_usb3_port_map(struct tegra_xusb_port *port)
|
|
|
|
{
|
|
|
|
return tegra_xusb_find_lane(port->padctl, "usb3", port->index);
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct tegra_xusb_port_ops tegra186_usb3_port_ops = {
|
2020-03-19 17:52:13 +07:00
|
|
|
.release = tegra_xusb_usb3_port_release,
|
2020-03-19 05:25:54 +07:00
|
|
|
.remove = tegra_xusb_usb3_port_remove,
|
2019-02-21 22:46:34 +07:00
|
|
|
.enable = tegra186_usb3_port_enable,
|
|
|
|
.disable = tegra186_usb3_port_disable,
|
|
|
|
.map = tegra186_usb3_port_map,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int tegra186_usb3_phy_power_on(struct phy *phy)
|
|
|
|
{
|
|
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
|
|
struct tegra_xusb_usb3_port *port;
|
|
|
|
struct tegra_xusb_usb2_port *usb2;
|
|
|
|
unsigned int index = lane->index;
|
|
|
|
struct device *dev = padctl->dev;
|
|
|
|
u32 value;
|
|
|
|
|
|
|
|
port = tegra_xusb_find_usb3_port(padctl, index);
|
|
|
|
if (!port) {
|
|
|
|
dev_err(dev, "no port found for USB3 lane %u\n", index);
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
usb2 = tegra_xusb_find_usb2_port(padctl, port->port);
|
|
|
|
if (!usb2) {
|
|
|
|
dev_err(dev, "no companion port found for USB3 lane %u\n",
|
|
|
|
index);
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
mutex_lock(&padctl->lock);
|
|
|
|
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_CAP);
|
|
|
|
value &= ~(PORT_CAP_MASK << PORTX_CAP_SHIFT(index));
|
|
|
|
|
|
|
|
if (usb2->mode == USB_DR_MODE_UNKNOWN)
|
|
|
|
value |= (PORT_CAP_DISABLED << PORTX_CAP_SHIFT(index));
|
|
|
|
else if (usb2->mode == USB_DR_MODE_PERIPHERAL)
|
|
|
|
value |= (PORT_CAP_DEVICE << PORTX_CAP_SHIFT(index));
|
|
|
|
else if (usb2->mode == USB_DR_MODE_HOST)
|
|
|
|
value |= (PORT_CAP_HOST << PORTX_CAP_SHIFT(index));
|
|
|
|
else if (usb2->mode == USB_DR_MODE_OTG)
|
|
|
|
value |= (PORT_CAP_OTG << PORTX_CAP_SHIFT(index));
|
|
|
|
|
|
|
|
padctl_writel(padctl, value, XUSB_PADCTL_SS_PORT_CAP);
|
|
|
|
|
2020-02-12 13:11:30 +07:00
|
|
|
if (padctl->soc->supports_gen2 && port->disable_gen2) {
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_CFG);
|
|
|
|
value &= ~(PORTX_SPEED_SUPPORT_MASK <<
|
|
|
|
PORTX_SPEED_SUPPORT_SHIFT(index));
|
|
|
|
value |= (PORT_SPEED_SUPPORT_GEN1 <<
|
|
|
|
PORTX_SPEED_SUPPORT_SHIFT(index));
|
|
|
|
padctl_writel(padctl, value, XUSB_PADCTL_SS_PORT_CFG);
|
|
|
|
}
|
|
|
|
|
2019-02-21 22:46:34 +07:00
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1);
|
|
|
|
value &= ~SSPX_ELPG_VCORE_DOWN(index);
|
|
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1);
|
|
|
|
|
|
|
|
usleep_range(100, 200);
|
|
|
|
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1);
|
|
|
|
value &= ~SSPX_ELPG_CLAMP_EN_EARLY(index);
|
|
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1);
|
|
|
|
|
|
|
|
usleep_range(100, 200);
|
|
|
|
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1);
|
|
|
|
value &= ~SSPX_ELPG_CLAMP_EN(index);
|
|
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1);
|
|
|
|
|
|
|
|
mutex_unlock(&padctl->lock);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int tegra186_usb3_phy_power_off(struct phy *phy)
|
|
|
|
{
|
|
|
|
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
|
|
|
|
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
|
|
|
|
struct tegra_xusb_usb3_port *port;
|
|
|
|
unsigned int index = lane->index;
|
|
|
|
struct device *dev = padctl->dev;
|
|
|
|
u32 value;
|
|
|
|
|
|
|
|
port = tegra_xusb_find_usb3_port(padctl, index);
|
|
|
|
if (!port) {
|
|
|
|
dev_err(dev, "no port found for USB3 lane %u\n", index);
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
mutex_lock(&padctl->lock);
|
|
|
|
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1);
|
|
|
|
value |= SSPX_ELPG_CLAMP_EN_EARLY(index);
|
|
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1);
|
|
|
|
|
|
|
|
usleep_range(100, 200);
|
|
|
|
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1);
|
|
|
|
value |= SSPX_ELPG_CLAMP_EN(index);
|
|
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1);
|
|
|
|
|
|
|
|
usleep_range(250, 350);
|
|
|
|
|
|
|
|
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1);
|
|
|
|
value |= SSPX_ELPG_VCORE_DOWN(index);
|
|
|
|
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1);
|
|
|
|
|
|
|
|
mutex_unlock(&padctl->lock);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int tegra186_usb3_phy_init(struct phy *phy)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int tegra186_usb3_phy_exit(struct phy *phy)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct phy_ops usb3_phy_ops = {
|
|
|
|
.init = tegra186_usb3_phy_init,
|
|
|
|
.exit = tegra186_usb3_phy_exit,
|
|
|
|
.power_on = tegra186_usb3_phy_power_on,
|
|
|
|
.power_off = tegra186_usb3_phy_power_off,
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct tegra_xusb_pad *
|
|
|
|
tegra186_usb3_pad_probe(struct tegra_xusb_padctl *padctl,
|
|
|
|
const struct tegra_xusb_pad_soc *soc,
|
|
|
|
struct device_node *np)
|
|
|
|
{
|
|
|
|
struct tegra_xusb_usb3_pad *usb3;
|
|
|
|
struct tegra_xusb_pad *pad;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
usb3 = kzalloc(sizeof(*usb3), GFP_KERNEL);
|
|
|
|
if (!usb3)
|
|
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
|
|
|
|
pad = &usb3->base;
|
|
|
|
pad->ops = &tegra186_usb3_lane_ops;
|
|
|
|
pad->soc = soc;
|
|
|
|
|
|
|
|
err = tegra_xusb_pad_init(pad, padctl, np);
|
|
|
|
if (err < 0) {
|
|
|
|
kfree(usb3);
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
err = tegra_xusb_pad_register(pad, &usb3_phy_ops);
|
|
|
|
if (err < 0)
|
|
|
|
goto unregister;
|
|
|
|
|
|
|
|
dev_set_drvdata(&pad->dev, pad);
|
|
|
|
|
|
|
|
return pad;
|
|
|
|
|
|
|
|
unregister:
|
|
|
|
device_unregister(&pad->dev);
|
|
|
|
out:
|
|
|
|
return ERR_PTR(err);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void tegra186_usb3_pad_remove(struct tegra_xusb_pad *pad)
|
|
|
|
{
|
|
|
|
struct tegra_xusb_usb2_pad *usb2 = to_usb2_pad(pad);
|
|
|
|
|
|
|
|
kfree(usb2);
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct tegra_xusb_pad_ops tegra186_usb3_pad_ops = {
|
|
|
|
.probe = tegra186_usb3_pad_probe,
|
|
|
|
.remove = tegra186_usb3_pad_remove,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const char * const tegra186_usb3_functions[] = {
|
|
|
|
"xusb",
|
|
|
|
};
|
|
|
|
|
|
|
|
static int
|
|
|
|
tegra186_xusb_read_fuse_calibration(struct tegra186_xusb_padctl *padctl)
|
|
|
|
{
|
|
|
|
struct device *dev = padctl->base.dev;
|
|
|
|
unsigned int i, count;
|
|
|
|
u32 value, *level;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
count = padctl->base.soc->ports.usb2.count;
|
|
|
|
|
|
|
|
level = devm_kcalloc(dev, count, sizeof(u32), GFP_KERNEL);
|
|
|
|
if (!level)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
err = tegra_fuse_readl(TEGRA_FUSE_SKU_CALIB_0, &value);
|
|
|
|
if (err) {
|
2020-02-24 21:36:41 +07:00
|
|
|
if (err != -EPROBE_DEFER)
|
|
|
|
dev_err(dev, "failed to read calibration fuse: %d\n",
|
|
|
|
err);
|
2019-02-21 22:46:34 +07:00
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
dev_dbg(dev, "FUSE_USB_CALIB_0 %#x\n", value);
|
|
|
|
|
|
|
|
for (i = 0; i < count; i++)
|
|
|
|
level[i] = (value >> HS_CURR_LEVEL_PADX_SHIFT(i)) &
|
|
|
|
HS_CURR_LEVEL_PAD_MASK;
|
|
|
|
|
|
|
|
padctl->calib.hs_curr_level = level;
|
|
|
|
|
|
|
|
padctl->calib.hs_squelch = (value >> HS_SQUELCH_SHIFT) &
|
|
|
|
HS_SQUELCH_MASK;
|
|
|
|
padctl->calib.hs_term_range_adj = (value >> HS_TERM_RANGE_ADJ_SHIFT) &
|
|
|
|
HS_TERM_RANGE_ADJ_MASK;
|
|
|
|
|
|
|
|
err = tegra_fuse_readl(TEGRA_FUSE_USB_CALIB_EXT_0, &value);
|
|
|
|
if (err) {
|
|
|
|
dev_err(dev, "failed to read calibration fuse: %d\n", err);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
dev_dbg(dev, "FUSE_USB_CALIB_EXT_0 %#x\n", value);
|
|
|
|
|
|
|
|
padctl->calib.rpd_ctrl = (value >> RPD_CTRL_SHIFT) & RPD_CTRL_MASK;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct tegra_xusb_padctl *
|
|
|
|
tegra186_xusb_padctl_probe(struct device *dev,
|
|
|
|
const struct tegra_xusb_padctl_soc *soc)
|
|
|
|
{
|
|
|
|
struct tegra186_xusb_padctl *priv;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
|
|
if (!priv)
|
|
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
|
|
|
|
priv->base.dev = dev;
|
|
|
|
priv->base.soc = soc;
|
|
|
|
|
|
|
|
err = tegra186_xusb_read_fuse_calibration(priv);
|
|
|
|
if (err < 0)
|
|
|
|
return ERR_PTR(err);
|
|
|
|
|
|
|
|
return &priv->base;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void tegra186_xusb_padctl_remove(struct tegra_xusb_padctl *padctl)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct tegra_xusb_padctl_ops tegra186_xusb_padctl_ops = {
|
|
|
|
.probe = tegra186_xusb_padctl_probe,
|
|
|
|
.remove = tegra186_xusb_padctl_remove,
|
2019-10-18 16:38:09 +07:00
|
|
|
.vbus_override = tegra186_xusb_padctl_vbus_override,
|
2019-02-21 22:46:34 +07:00
|
|
|
};
|
|
|
|
|
2020-02-12 13:11:29 +07:00
|
|
|
#if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC)
|
2019-02-21 22:46:34 +07:00
|
|
|
static const char * const tegra186_xusb_padctl_supply_names[] = {
|
|
|
|
"avdd-pll-erefeut",
|
|
|
|
"avdd-usb",
|
|
|
|
"vclamp-usb",
|
|
|
|
"vddio-hsic",
|
|
|
|
};
|
|
|
|
|
2020-02-12 13:11:29 +07:00
|
|
|
static const struct tegra_xusb_lane_soc tegra186_usb2_lanes[] = {
|
|
|
|
TEGRA186_LANE("usb2-0", 0, 0, 0, usb2),
|
|
|
|
TEGRA186_LANE("usb2-1", 0, 0, 0, usb2),
|
|
|
|
TEGRA186_LANE("usb2-2", 0, 0, 0, usb2),
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct tegra_xusb_pad_soc tegra186_usb2_pad = {
|
|
|
|
.name = "usb2",
|
|
|
|
.num_lanes = ARRAY_SIZE(tegra186_usb2_lanes),
|
|
|
|
.lanes = tegra186_usb2_lanes,
|
|
|
|
.ops = &tegra186_usb2_pad_ops,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct tegra_xusb_lane_soc tegra186_usb3_lanes[] = {
|
|
|
|
TEGRA186_LANE("usb3-0", 0, 0, 0, usb3),
|
|
|
|
TEGRA186_LANE("usb3-1", 0, 0, 0, usb3),
|
|
|
|
TEGRA186_LANE("usb3-2", 0, 0, 0, usb3),
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct tegra_xusb_pad_soc tegra186_usb3_pad = {
|
|
|
|
.name = "usb3",
|
|
|
|
.num_lanes = ARRAY_SIZE(tegra186_usb3_lanes),
|
|
|
|
.lanes = tegra186_usb3_lanes,
|
|
|
|
.ops = &tegra186_usb3_pad_ops,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct tegra_xusb_pad_soc * const tegra186_pads[] = {
|
|
|
|
&tegra186_usb2_pad,
|
|
|
|
&tegra186_usb3_pad,
|
|
|
|
#if 0 /* TODO implement */
|
|
|
|
&tegra186_hsic_pad,
|
|
|
|
#endif
|
|
|
|
};
|
|
|
|
|
2019-02-21 22:46:34 +07:00
|
|
|
const struct tegra_xusb_padctl_soc tegra186_xusb_padctl_soc = {
|
|
|
|
.num_pads = ARRAY_SIZE(tegra186_pads),
|
|
|
|
.pads = tegra186_pads,
|
|
|
|
.ports = {
|
|
|
|
.usb2 = {
|
|
|
|
.ops = &tegra186_usb2_port_ops,
|
|
|
|
.count = 3,
|
|
|
|
},
|
|
|
|
#if 0 /* TODO implement */
|
|
|
|
.hsic = {
|
|
|
|
.ops = &tegra186_hsic_port_ops,
|
|
|
|
.count = 1,
|
|
|
|
},
|
|
|
|
#endif
|
|
|
|
.usb3 = {
|
|
|
|
.ops = &tegra186_usb3_port_ops,
|
|
|
|
.count = 3,
|
|
|
|
},
|
|
|
|
},
|
|
|
|
.ops = &tegra186_xusb_padctl_ops,
|
|
|
|
.supply_names = tegra186_xusb_padctl_supply_names,
|
|
|
|
.num_supplies = ARRAY_SIZE(tegra186_xusb_padctl_supply_names),
|
|
|
|
};
|
|
|
|
EXPORT_SYMBOL_GPL(tegra186_xusb_padctl_soc);
|
2020-02-12 13:11:29 +07:00
|
|
|
#endif
|
2019-02-21 22:46:34 +07:00
|
|
|
|
2020-02-12 13:11:30 +07:00
|
|
|
#if IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC)
|
|
|
|
static const char * const tegra194_xusb_padctl_supply_names[] = {
|
|
|
|
"avdd-usb",
|
|
|
|
"vclamp-usb",
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct tegra_xusb_lane_soc tegra194_usb2_lanes[] = {
|
|
|
|
TEGRA186_LANE("usb2-0", 0, 0, 0, usb2),
|
|
|
|
TEGRA186_LANE("usb2-1", 0, 0, 0, usb2),
|
|
|
|
TEGRA186_LANE("usb2-2", 0, 0, 0, usb2),
|
|
|
|
TEGRA186_LANE("usb2-3", 0, 0, 0, usb2),
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct tegra_xusb_pad_soc tegra194_usb2_pad = {
|
|
|
|
.name = "usb2",
|
|
|
|
.num_lanes = ARRAY_SIZE(tegra194_usb2_lanes),
|
|
|
|
.lanes = tegra194_usb2_lanes,
|
|
|
|
.ops = &tegra186_usb2_pad_ops,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct tegra_xusb_lane_soc tegra194_usb3_lanes[] = {
|
|
|
|
TEGRA186_LANE("usb3-0", 0, 0, 0, usb3),
|
|
|
|
TEGRA186_LANE("usb3-1", 0, 0, 0, usb3),
|
|
|
|
TEGRA186_LANE("usb3-2", 0, 0, 0, usb3),
|
|
|
|
TEGRA186_LANE("usb3-3", 0, 0, 0, usb3),
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct tegra_xusb_pad_soc tegra194_usb3_pad = {
|
|
|
|
.name = "usb3",
|
|
|
|
.num_lanes = ARRAY_SIZE(tegra194_usb3_lanes),
|
|
|
|
.lanes = tegra194_usb3_lanes,
|
|
|
|
.ops = &tegra186_usb3_pad_ops,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct tegra_xusb_pad_soc * const tegra194_pads[] = {
|
|
|
|
&tegra194_usb2_pad,
|
|
|
|
&tegra194_usb3_pad,
|
|
|
|
};
|
|
|
|
|
|
|
|
const struct tegra_xusb_padctl_soc tegra194_xusb_padctl_soc = {
|
|
|
|
.num_pads = ARRAY_SIZE(tegra194_pads),
|
|
|
|
.pads = tegra194_pads,
|
|
|
|
.ports = {
|
|
|
|
.usb2 = {
|
|
|
|
.ops = &tegra186_usb2_port_ops,
|
|
|
|
.count = 4,
|
|
|
|
},
|
|
|
|
.usb3 = {
|
|
|
|
.ops = &tegra186_usb3_port_ops,
|
|
|
|
.count = 4,
|
|
|
|
},
|
|
|
|
},
|
|
|
|
.ops = &tegra186_xusb_padctl_ops,
|
|
|
|
.supply_names = tegra194_xusb_padctl_supply_names,
|
|
|
|
.num_supplies = ARRAY_SIZE(tegra194_xusb_padctl_supply_names),
|
|
|
|
.supports_gen2 = true,
|
|
|
|
};
|
|
|
|
EXPORT_SYMBOL_GPL(tegra194_xusb_padctl_soc);
|
|
|
|
#endif
|
|
|
|
|
2019-02-21 22:46:34 +07:00
|
|
|
MODULE_AUTHOR("JC Kuo <jckuo@nvidia.com>");
|
|
|
|
MODULE_DESCRIPTION("NVIDIA Tegra186 XUSB Pad Controller driver");
|
|
|
|
MODULE_LICENSE("GPL v2");
|