linux_dsm_epyc7002/drivers/gpu/drm/i915/intel_uc.h

193 lines
6.7 KiB
C
Raw Normal View History

/*
* Copyright © 2014 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
*/
#ifndef _INTEL_UC_H_
#define _INTEL_UC_H_
#include "intel_guc_fwif.h"
#include "i915_guc_reg.h"
#include "intel_ringbuffer.h"
struct drm_i915_gem_request;
/*
* This structure primarily describes the GEM object shared with the GuC.
* The GEM object is held for the entire lifetime of our interaction with
* the GuC, being allocated before the GuC is loaded with its firmware.
* Because there's no way to update the address used by the GuC after
* initialisation, the shared object must stay pinned into the GGTT as
* long as the GuC is in use. We also keep the first page (only) mapped
* into kernel address space, as it includes shared data that must be
* updated on every request submission.
*
* The single GEM object described here is actually made up of several
* separate areas, as far as the GuC is concerned. The first page (kept
* kmap'd) includes the "process decriptor" which holds sequence data for
* the doorbell, and one cacheline which actually *is* the doorbell; a
* write to this will "ring the doorbell" (i.e. send an interrupt to the
* GuC). The subsequent pages of the client object constitute the work
* queue (a circular array of work items), again described in the process
* descriptor. Work queue pages are mapped momentarily as required.
*
* We also keep a few statistics on failures. Ideally, these should all
* be zero!
* no_wq_space: times that the submission pre-check found no space was
* available in the work queue (note, the queue is shared,
* not per-engine). It is OK for this to be nonzero, but
* it should not be huge!
* q_fail: failed to enqueue a work item. This should never happen,
* because we check for space beforehand.
* b_fail: failed to ring the doorbell. This should never happen, unless
* somehow the hardware misbehaves, or maybe if the GuC firmware
* crashes? We probably need to reset the GPU to recover.
* retcode: errno from last guc_submit()
*/
struct i915_guc_client {
struct i915_vma *vma;
void *vaddr;
struct i915_gem_context *owner;
struct intel_guc *guc;
uint32_t engines; /* bitmap of (host) engine ids */
uint32_t priority;
uint32_t ctx_index;
uint32_t proc_desc_offset;
uint32_t doorbell_offset;
uint32_t cookie;
uint16_t doorbell_id;
uint16_t padding[3]; /* Maintain alignment */
spinlock_t wq_lock;
uint32_t wq_offset;
uint32_t wq_size;
uint32_t wq_tail;
uint32_t wq_rsvd;
uint32_t no_wq_space;
uint32_t b_fail;
int retcode;
/* Per-engine counts of GuC submissions */
uint64_t submissions[I915_NUM_ENGINES];
};
enum intel_guc_fw_status {
GUC_FIRMWARE_FAIL = -1,
GUC_FIRMWARE_NONE = 0,
GUC_FIRMWARE_PENDING,
GUC_FIRMWARE_SUCCESS
};
/*
* This structure encapsulates all the data needed during the process
* of fetching, caching, and loading the firmware image into the GuC.
*/
struct intel_guc_fw {
const char * guc_fw_path;
size_t guc_fw_size;
struct drm_i915_gem_object * guc_fw_obj;
enum intel_guc_fw_status guc_fw_fetch_status;
enum intel_guc_fw_status guc_fw_load_status;
uint16_t guc_fw_major_wanted;
uint16_t guc_fw_minor_wanted;
uint16_t guc_fw_major_found;
uint16_t guc_fw_minor_found;
uint32_t header_size;
uint32_t header_offset;
uint32_t rsa_size;
uint32_t rsa_offset;
uint32_t ucode_size;
uint32_t ucode_offset;
};
struct intel_guc_log {
uint32_t flags;
struct i915_vma *vma;
drm/i915: Handle log buffer flush interrupt event from GuC GuC ukernel sends an interrupt to Host to flush the log buffer and expects Host to correspondingly update the read pointer information in the state structure, once it has consumed the log buffer contents by copying them to a file or buffer. Even if Host couldn't copy the contents, it can still update the read pointer so that logging state is not disturbed on GuC side. v2: - Use a dedicated workqueue for handling flush interrupt. (Tvrtko) - Reduce the overall log buffer copying time by skipping the copy of crash buffer area for regular cases and copying only the state structure data in first page. v3: - Create a vmalloc mapping of log buffer. (Chris) - Cover the flush acknowledgment under rpm get & put.(Chris) - Revert the change of skipping the copy of crash dump area, as not really needed, will be covered by subsequent patch. v4: - Destroy the wq under the same condition in which it was created, pass dev_piv pointer instead of dev to newly added GuC function, add more comments & rename variable for clarity. (Tvrtko) v5: - Allocate & destroy the dedicated wq, for handling flush interrupt, from the setup/teardown routines of GuC logging. (Chris) - Validate the log buffer size value retrieved from state structure and do some minor cleanup. (Tvrtko) - Fix error/warnings reported by checkpatch. (Tvrtko) - Rebase. v6: - Remove the interrupts_enabled check from guc_capture_logs_work, need to process that last work item also, queued just before disabling the interrupt as log buffer flush interrupt handling is a bit different case where GuC is actually expecting an ACK from host, which should be provided to keep the logging going. Sync against the work will be done by caller disabling the interrupt. - Don't sample the log buffer size value from state structure, directly use the expected value to move the pointer & do the copy and that cannot go wrong (out of bounds) as Driver only allocated the log buffer and the relay buffers. Driver should refrain from interpreting the log packet, as much possible and let Userspace parser detect the anomaly. (Chris) v7: - Use switch statement instead of 'if else' for retrieving the GuC log buffer size. (Tvrtko) - Refactored the log buffer copying function and shortended the name of couple of variables for better readability. (Tvrtko) v8: - Make the dedicated wq as a high priority one to further reduce the turnaround time of handing log buffer flush event from GuC. Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Akash Goel <akash.goel@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2016-10-12 23:24:32 +07:00
void *buf_addr;
struct workqueue_struct *flush_wq;
struct work_struct flush_work;
drm/i915: Add a relay backed debugfs interface for capturing GuC logs Added a new debugfs interface '/sys/kernel/debug/dri/guc_log' for the User to capture GuC firmware logs. Availed relay framework to implement the interface, where Driver will have to just use a relay API to store snapshots of the GuC log buffer in the buffer managed by relay. The snapshot will be taken when GuC firmware sends a log buffer flush interrupt and up to four snapshots could be stored in the relay buffer. The relay buffer will be operated in a mode where it will overwrite the data not yet collected by User. Besides mmap method, through which User can directly access the relay buffer contents, relay also supports the 'poll' method. Through the 'poll' call on log file, User can come to know whenever a new snapshot of the log buffer is taken by Driver, so can run in tandem with the Driver and capture the logs in a sustained/streaming manner, without any loss of data. v2: Defer the creation of relay channel & associated debugfs file, as debugfs setup is now done at the end of i915 Driver load. (Chris) v3: - Switch to no-overwrite mode for relay. - Fix the relay sub buffer switching sequence. v4: - Update i915 Kconfig to select RELAY config. (TvrtKo) - Log a message when there is no sub buffer available to capture the GuC log buffer. (Tvrtko) - Increase the number of relay sub buffers to 8 from 4, to have sufficient buffering for boot time logs v5: - Fix the alignment, indentation issues and some minor cleanup. (Tvrtko) - Update the comment to elaborate on why a relay channel has to be associated with the debugfs file. (Tvrtko) v6: - Move the write to 'is_global' after the NULL check on parent directory dentry pointer. (Tvrtko) v7: Add a BUG_ON to validate relay buffer allocation size. (Chris) Testcase: igt/tools/intel_guc_logger Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Sourab Gupta <sourab.gupta@intel.com> Signed-off-by: Akash Goel <akash.goel@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2016-10-12 23:24:34 +07:00
struct rchan *relay_chan;
/* logging related stats */
u32 capture_miss_count;
u32 flush_interrupt_count;
u32 prev_overflow_count[GUC_MAX_LOG_BUFFER];
u32 total_overflow_count[GUC_MAX_LOG_BUFFER];
u32 flush_count[GUC_MAX_LOG_BUFFER];
};
struct intel_guc {
struct intel_guc_fw guc_fw;
struct intel_guc_log log;
drm/i915: Support for GuC interrupts There are certain types of interrupts which Host can receive from GuC. GuC ukernel sends an interrupt to Host for certain events, like for example retrieve/consume the logs generated by ukernel. This patch adds support to receive interrupts from GuC but currently enables & partially handles only the interrupt sent by GuC ukernel. Future patches will add support for handling other interrupt types. v2: - Use common low level routines for PM IER/IIR programming (Chris) - Rename interrupt functions to gen9_xxx from gen8_xxx (Chris) - Replace disabling of wake ref asserts with rpm get/put (Chris) v3: - Update comments for more clarity. (Tvrtko) - Remove the masking of GuC interrupt, which was kept masked till the start of bottom half, its not really needed as there is only a single instance of work item & wq is ordered. (Tvrtko) v4: - Rebase. - Rename guc_events to pm_guc_events so as to be indicative of the register/control block it is associated with. (Chris) - Add handling for back to back log buffer flush interrupts. v5: - Move the read & clearing of register, containing Guc2Host message bits, outside the irq spinlock. (Tvrtko) v6: - Move the log buffer flush interrupt related stuff to the following patch so as to do only generic bits in this patch. (Tvrtko) - Rebase. v7: - Remove the interrupts_enabled check from gen9_guc_irq_handler, want to process that last interrupt also before disabling the interrupt, sync against the work queued by irq handler will be done by caller disabling the interrupt. Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Akash Goel <akash.goel@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2016-10-12 23:24:31 +07:00
/* GuC2Host interrupt related state */
bool interrupts_enabled;
struct i915_vma *ads_vma;
struct i915_vma *ctx_pool_vma;
struct ida ctx_ids;
struct i915_guc_client *execbuf_client;
DECLARE_BITMAP(doorbell_bitmap, GUC_MAX_DOORBELLS);
uint32_t db_cacheline; /* Cyclic counter mod pagesize */
/* Action status & statistics */
uint64_t action_count; /* Total commands issued */
uint32_t action_cmd; /* Last command word */
uint32_t action_status; /* Last return status */
uint32_t action_fail; /* Total number of failures */
int32_t action_err; /* Last error code */
uint64_t submissions[I915_NUM_ENGINES];
uint32_t last_seqno[I915_NUM_ENGINES];
/* To serialize the Host2GuC actions */
struct mutex action_lock;
};
/* intel_guc_loader.c */
extern void intel_guc_init(struct drm_device *dev);
extern int intel_guc_setup(struct drm_device *dev);
extern void intel_guc_fini(struct drm_device *dev);
extern const char *intel_guc_fw_status_repr(enum intel_guc_fw_status status);
extern int intel_guc_suspend(struct drm_device *dev);
extern int intel_guc_resume(struct drm_device *dev);
/* i915_guc_submission.c */
int i915_guc_submission_init(struct drm_i915_private *dev_priv);
int i915_guc_submission_enable(struct drm_i915_private *dev_priv);
int i915_guc_wq_reserve(struct drm_i915_gem_request *rq);
void i915_guc_wq_unreserve(struct drm_i915_gem_request *request);
void i915_guc_submission_disable(struct drm_i915_private *dev_priv);
void i915_guc_submission_fini(struct drm_i915_private *dev_priv);
drm/i915: Handle log buffer flush interrupt event from GuC GuC ukernel sends an interrupt to Host to flush the log buffer and expects Host to correspondingly update the read pointer information in the state structure, once it has consumed the log buffer contents by copying them to a file or buffer. Even if Host couldn't copy the contents, it can still update the read pointer so that logging state is not disturbed on GuC side. v2: - Use a dedicated workqueue for handling flush interrupt. (Tvrtko) - Reduce the overall log buffer copying time by skipping the copy of crash buffer area for regular cases and copying only the state structure data in first page. v3: - Create a vmalloc mapping of log buffer. (Chris) - Cover the flush acknowledgment under rpm get & put.(Chris) - Revert the change of skipping the copy of crash dump area, as not really needed, will be covered by subsequent patch. v4: - Destroy the wq under the same condition in which it was created, pass dev_piv pointer instead of dev to newly added GuC function, add more comments & rename variable for clarity. (Tvrtko) v5: - Allocate & destroy the dedicated wq, for handling flush interrupt, from the setup/teardown routines of GuC logging. (Chris) - Validate the log buffer size value retrieved from state structure and do some minor cleanup. (Tvrtko) - Fix error/warnings reported by checkpatch. (Tvrtko) - Rebase. v6: - Remove the interrupts_enabled check from guc_capture_logs_work, need to process that last work item also, queued just before disabling the interrupt as log buffer flush interrupt handling is a bit different case where GuC is actually expecting an ACK from host, which should be provided to keep the logging going. Sync against the work will be done by caller disabling the interrupt. - Don't sample the log buffer size value from state structure, directly use the expected value to move the pointer & do the copy and that cannot go wrong (out of bounds) as Driver only allocated the log buffer and the relay buffers. Driver should refrain from interpreting the log packet, as much possible and let Userspace parser detect the anomaly. (Chris) v7: - Use switch statement instead of 'if else' for retrieving the GuC log buffer size. (Tvrtko) - Refactored the log buffer copying function and shortended the name of couple of variables for better readability. (Tvrtko) v8: - Make the dedicated wq as a high priority one to further reduce the turnaround time of handing log buffer flush event from GuC. Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Akash Goel <akash.goel@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2016-10-12 23:24:32 +07:00
void i915_guc_capture_logs(struct drm_i915_private *dev_priv);
void i915_guc_flush_logs(struct drm_i915_private *dev_priv);
drm/i915: Add a relay backed debugfs interface for capturing GuC logs Added a new debugfs interface '/sys/kernel/debug/dri/guc_log' for the User to capture GuC firmware logs. Availed relay framework to implement the interface, where Driver will have to just use a relay API to store snapshots of the GuC log buffer in the buffer managed by relay. The snapshot will be taken when GuC firmware sends a log buffer flush interrupt and up to four snapshots could be stored in the relay buffer. The relay buffer will be operated in a mode where it will overwrite the data not yet collected by User. Besides mmap method, through which User can directly access the relay buffer contents, relay also supports the 'poll' method. Through the 'poll' call on log file, User can come to know whenever a new snapshot of the log buffer is taken by Driver, so can run in tandem with the Driver and capture the logs in a sustained/streaming manner, without any loss of data. v2: Defer the creation of relay channel & associated debugfs file, as debugfs setup is now done at the end of i915 Driver load. (Chris) v3: - Switch to no-overwrite mode for relay. - Fix the relay sub buffer switching sequence. v4: - Update i915 Kconfig to select RELAY config. (TvrtKo) - Log a message when there is no sub buffer available to capture the GuC log buffer. (Tvrtko) - Increase the number of relay sub buffers to 8 from 4, to have sufficient buffering for boot time logs v5: - Fix the alignment, indentation issues and some minor cleanup. (Tvrtko) - Update the comment to elaborate on why a relay channel has to be associated with the debugfs file. (Tvrtko) v6: - Move the write to 'is_global' after the NULL check on parent directory dentry pointer. (Tvrtko) v7: Add a BUG_ON to validate relay buffer allocation size. (Chris) Testcase: igt/tools/intel_guc_logger Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Sourab Gupta <sourab.gupta@intel.com> Signed-off-by: Akash Goel <akash.goel@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2016-10-12 23:24:34 +07:00
void i915_guc_register(struct drm_i915_private *dev_priv);
void i915_guc_unregister(struct drm_i915_private *dev_priv);
int i915_guc_log_control(struct drm_i915_private *dev_priv, u64 control_val);
#endif