linux_dsm_epyc7002/drivers/net/Makefile

217 lines
6.6 KiB
Makefile
Raw Normal View History

#
# Makefile for the Linux network (ethercard) device drivers.
#
obj-$(CONFIG_E1000) += e1000/
obj-$(CONFIG_IBM_EMAC) += ibm_emac/
obj-$(CONFIG_IXGB) += ixgb/
[PATCH] A new 10GB Ethernet Driver by Chelsio Communications A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang <tinay@chelsio.com> Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter <christoph@lameter Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian Bunk. Reduces the size of the driver to ~260k. - clean up tabs - removed my3126.c - removed 85% of suni1x10gexp_regs.h - removed 80% of regs.h - removed various calls, renamed variables/functions. - removed system specific and other wrappers (usleep, msleep) - removed dead code - dropped redundant casts in osdep.h - dropped redundant check of kfree - dropped weird code (MODVERSIONS stuff) - reduced number of #ifdefs - use kcalloc now instead of kmalloc - Add information about known issues with the driver - Add information about authors Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null Documentation/networking/cxgb.txt
2005-03-31 04:34:31 +07:00
obj-$(CONFIG_CHELSIO_T1) += chelsio/
obj-$(CONFIG_EHEA) += ehea/
obj-$(CONFIG_BONDING) += bonding/
obj-$(CONFIG_GIANFAR) += gianfar_driver.o
gianfar_driver-objs := gianfar.o \
gianfar_ethtool.o \
gianfar_mii.o \
gianfar_sysfs.o
obj-$(CONFIG_UCC_GETH) += ucc_geth_driver.o
ucc_geth_driver-objs := ucc_geth.o ucc_geth_phy.o
#
# link order important here
#
obj-$(CONFIG_PLIP) += plip.o
obj-$(CONFIG_ROADRUNNER) += rrunner.o
obj-$(CONFIG_HAPPYMEAL) += sunhme.o
obj-$(CONFIG_SUNLANCE) += sunlance.o
obj-$(CONFIG_SUNQE) += sunqe.o
obj-$(CONFIG_SUNBMAC) += sunbmac.o
obj-$(CONFIG_MYRI_SBUS) += myri_sbus.o
obj-$(CONFIG_SUNGEM) += sungem.o sungem_phy.o
obj-$(CONFIG_CASSINI) += cassini.o
obj-$(CONFIG_MACE) += mace.o
obj-$(CONFIG_BMAC) += bmac.o
obj-$(CONFIG_OAKNET) += oaknet.o 8390.o
obj-$(CONFIG_DGRS) += dgrs.o
obj-$(CONFIG_VORTEX) += 3c59x.o
obj-$(CONFIG_TYPHOON) += typhoon.o
obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o
obj-$(CONFIG_PCNET32) += pcnet32.o
obj-$(CONFIG_EEPRO100) += eepro100.o
obj-$(CONFIG_E100) += e100.o
obj-$(CONFIG_TLAN) += tlan.o
obj-$(CONFIG_EPIC100) += epic100.o
obj-$(CONFIG_SIS190) += sis190.o
obj-$(CONFIG_SIS900) += sis900.o
obj-$(CONFIG_YELLOWFIN) += yellowfin.o
obj-$(CONFIG_ACENIC) += acenic.o
obj-$(CONFIG_ISERIES_VETH) += iseries_veth.o
obj-$(CONFIG_NATSEMI) += natsemi.o
obj-$(CONFIG_NS83820) += ns83820.o
obj-$(CONFIG_STNIC) += stnic.o 8390.o
obj-$(CONFIG_FEALNX) += fealnx.o
obj-$(CONFIG_TIGON3) += tg3.o
obj-$(CONFIG_BNX2) += bnx2.o
spidernet-y += spider_net.o spider_net_ethtool.o
obj-$(CONFIG_SPIDER_NET) += spidernet.o sungem_phy.o
obj-$(CONFIG_TC35815) += tc35815.o
obj-$(CONFIG_SKGE) += skge.o
obj-$(CONFIG_SKY2) += sky2.o
obj-$(CONFIG_SK98LIN) += sk98lin/
obj-$(CONFIG_SKFP) += skfp/
obj-$(CONFIG_VIA_RHINE) += via-rhine.o
obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
obj-$(CONFIG_RIONET) += rionet.o
#
# end link order section
#
obj-$(CONFIG_MII) += mii.o
obj-$(CONFIG_PHYLIB) += phy/
obj-$(CONFIG_SUNDANCE) += sundance.o
obj-$(CONFIG_HAMACHI) += hamachi.o
obj-$(CONFIG_NET) += Space.o loopback.o
obj-$(CONFIG_SEEQ8005) += seeq8005.o
obj-$(CONFIG_NET_SB1000) += sb1000.o
obj-$(CONFIG_MAC8390) += mac8390.o 8390.o
obj-$(CONFIG_APNE) += apne.o 8390.o
obj-$(CONFIG_PCMCIA_PCNET) += 8390.o
obj-$(CONFIG_SHAPER) += shaper.o
obj-$(CONFIG_HP100) += hp100.o
obj-$(CONFIG_SMC9194) += smc9194.o
obj-$(CONFIG_FEC) += fec.o
obj-$(CONFIG_68360_ENET) += 68360enet.o
obj-$(CONFIG_ARM_ETHERH) += 8390.o
obj-$(CONFIG_WD80x3) += wd.o 8390.o
obj-$(CONFIG_EL2) += 3c503.o 8390.o
obj-$(CONFIG_NE2000) += ne.o 8390.o
obj-$(CONFIG_NE2_MCA) += ne2.o 8390.o
obj-$(CONFIG_HPLAN) += hp.o 8390.o
obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390.o
obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o
obj-$(CONFIG_ULTRAMCA) += smc-mca.o 8390.o
obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o
obj-$(CONFIG_E2100) += e2100.o 8390.o
obj-$(CONFIG_ES3210) += es3210.o 8390.o
obj-$(CONFIG_LNE390) += lne390.o 8390.o
obj-$(CONFIG_NE3210) += ne3210.o 8390.o
obj-$(CONFIG_NET_SB1250_MAC) += sb1250-mac.o
obj-$(CONFIG_B44) += b44.o
obj-$(CONFIG_FORCEDETH) += forcedeth.o
obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o
obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
obj-$(CONFIG_QLA3XXX) += qla3xxx.o
obj-$(CONFIG_PPP) += ppp_generic.o
obj-$(CONFIG_PPP_ASYNC) += ppp_async.o
obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o
obj-$(CONFIG_PPP_DEFLATE) += ppp_deflate.o
obj-$(CONFIG_PPP_BSDCOMP) += bsd_comp.o
obj-$(CONFIG_PPP_MPPE) += ppp_mppe.o
obj-$(CONFIG_PPPOE) += pppox.o pppoe.o
obj-$(CONFIG_SLIP) += slip.o
obj-$(CONFIG_SLHC) += slhc.o
obj-$(CONFIG_DUMMY) += dummy.o
obj-$(CONFIG_IFB) += ifb.o
obj-$(CONFIG_DE600) += de600.o
obj-$(CONFIG_DE620) += de620.o
obj-$(CONFIG_LANCE) += lance.o
obj-$(CONFIG_SUN3_82586) += sun3_82586.o
obj-$(CONFIG_SUN3LANCE) += sun3lance.o
obj-$(CONFIG_DEFXX) += defxx.o
obj-$(CONFIG_SGISEEQ) += sgiseeq.o
obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
obj-$(CONFIG_AT1700) += at1700.o
obj-$(CONFIG_EL1) += 3c501.o
obj-$(CONFIG_EL16) += 3c507.o
obj-$(CONFIG_ELMC) += 3c523.o
obj-$(CONFIG_SKMC) += sk_mca.o
obj-$(CONFIG_IBMLANA) += ibmlana.o
obj-$(CONFIG_ELMC_II) += 3c527.o
obj-$(CONFIG_EL3) += 3c509.o
obj-$(CONFIG_3C515) += 3c515.o
obj-$(CONFIG_EEXPRESS) += eexpress.o
obj-$(CONFIG_EEXPRESS_PRO) += eepro.o
obj-$(CONFIG_8139CP) += 8139cp.o
obj-$(CONFIG_8139TOO) += 8139too.o
obj-$(CONFIG_ZNET) += znet.o
obj-$(CONFIG_LAN_SAA9730) += saa9730.o
obj-$(CONFIG_DEPCA) += depca.o
obj-$(CONFIG_EWRK3) += ewrk3.o
obj-$(CONFIG_ATP) += atp.o
obj-$(CONFIG_NI5010) += ni5010.o
obj-$(CONFIG_NI52) += ni52.o
obj-$(CONFIG_NI65) += ni65.o
obj-$(CONFIG_ELPLUS) += 3c505.o
obj-$(CONFIG_AC3200) += ac3200.o 8390.o
obj-$(CONFIG_APRICOT) += 82596.o
obj-$(CONFIG_LASI_82596) += lasi_82596.o
obj-$(CONFIG_MVME16x_NET) += 82596.o
obj-$(CONFIG_BVME6000_NET) += 82596.o
# This is also a 82596 and should probably be merged
obj-$(CONFIG_LP486E) += lp486e.o
obj-$(CONFIG_ETH16I) += eth16i.o
obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o
obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
obj-$(CONFIG_MVME147_NET) += mvme147.o 7990.o
obj-$(CONFIG_EQUALIZER) += eql.o
obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o
obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
obj-$(CONFIG_DECLANCE) += declance.o
obj-$(CONFIG_ATARILANCE) += atarilance.o
obj-$(CONFIG_ATARI_BIONET) += atari_bionet.o
obj-$(CONFIG_ATARI_PAMSNET) += atari_pamsnet.o
obj-$(CONFIG_A2065) += a2065.o
obj-$(CONFIG_HYDRA) += hydra.o 8390.o
obj-$(CONFIG_ARIADNE) += ariadne.o
obj-$(CONFIG_CS89x0) += cs89x0.o
obj-$(CONFIG_MACSONIC) += macsonic.o
obj-$(CONFIG_MACMACE) += macmace.o
obj-$(CONFIG_MAC89x0) += mac89x0.o
obj-$(CONFIG_TUN) += tun.o
obj-$(CONFIG_NET_NETX) += netx-eth.o
obj-$(CONFIG_DL2K) += dl2k.o
obj-$(CONFIG_R8169) += r8169.o
obj-$(CONFIG_AMD8111_ETH) += amd8111e.o
obj-$(CONFIG_IBMVETH) += ibmveth.o
obj-$(CONFIG_S2IO) += s2io.o
obj-$(CONFIG_MYRI10GE) += myri10ge/
obj-$(CONFIG_SMC91X) += smc91x.o
obj-$(CONFIG_SMC911X) += smc911x.o
obj-$(CONFIG_DM9000) += dm9000.o
obj-$(CONFIG_FEC_8XX) += fec_8xx/
obj-$(CONFIG_ARM) += arm/
obj-$(CONFIG_DEV_APPLETALK) += appletalk/
obj-$(CONFIG_TR) += tokenring/
obj-$(CONFIG_WAN) += wan/
obj-$(CONFIG_ARCNET) += arcnet/
obj-$(CONFIG_NET_PCMCIA) += pcmcia/
obj-$(CONFIG_NET_RADIO) += wireless/
obj-$(CONFIG_NET_TULIP) += tulip/
obj-$(CONFIG_HAMRADIO) += hamradio/
obj-$(CONFIG_IRDA) += irda/
obj-$(CONFIG_ETRAX_ETHERNET) += cris/
[PATCH] intel ixp2000 network driver The way the hardware and firmware work is that there is one shared RX queue and IRQ for a number of different network interfaces. Due to this, we would like to process received packets for every interface in the same NAPI poll handler, so we need a pseudo-device to schedule polling on. What the driver currently does is that it always schedules polling for the first network interface in the list, and processes packets for every interface in the poll handler for that first interface -- however, this scheme breaks down if the first network interface happens to not be up, since netif_rx_schedule_prep() checks netif_running(). sky2 apparently has the same issue, and Stephen Hemminger suggested a way to work around this: create a variant of netif_rx_schedule_prep() that does not check netif_running(). I implemented this locally and called it netif_rx_schedule_prep_notup(), and it seems to work well, but it's something that probably not everyone would be happy with. The ixp2000 is an ARM CPU with a high-speed network interface in the CPU itself (full duplex 4Gb/s or 10Gb/s depending on the IXP model.) The CPU package also contains 8 or 16 (again depending on the IXP model) 'microengines', which are somewhat primitive but very fast and efficient processor cores which can be used to offload various things from the main CPU. This driver makes the high-speed network interface in the CPU visible and usable as a regular linux network device. Currently, it only supports the Radisys ENP2611 IXP board, but adding support for other board types should be fairly easy. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-12 00:23:13 +07:00
obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/
obj-$(CONFIG_NETCONSOLE) += netconsole.o
obj-$(CONFIG_FS_ENET) += fs_enet/