drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 23:44:06 +07:00
|
|
|
/*
|
|
|
|
* Copyright (C) 2013 Red Hat
|
|
|
|
* Author: Rob Clark <robdclark@gmail.com>
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
|
|
* under the terms of the GNU General Public License version 2 as published by
|
|
|
|
* the Free Software Foundation.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
|
|
* more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License along with
|
|
|
|
* this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include "hdmi.h"
|
|
|
|
|
|
|
|
static struct platform_device *hdmi_pdev;
|
|
|
|
|
|
|
|
void hdmi_set_mode(struct hdmi *hdmi, bool power_on)
|
|
|
|
{
|
|
|
|
uint32_t ctrl = 0;
|
|
|
|
|
|
|
|
if (power_on) {
|
|
|
|
ctrl |= HDMI_CTRL_ENABLE;
|
|
|
|
if (!hdmi->hdmi_mode) {
|
|
|
|
ctrl |= HDMI_CTRL_HDMI;
|
|
|
|
hdmi_write(hdmi, REG_HDMI_CTRL, ctrl);
|
|
|
|
ctrl &= ~HDMI_CTRL_HDMI;
|
|
|
|
} else {
|
|
|
|
ctrl |= HDMI_CTRL_HDMI;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
ctrl = HDMI_CTRL_HDMI;
|
|
|
|
}
|
|
|
|
|
|
|
|
hdmi_write(hdmi, REG_HDMI_CTRL, ctrl);
|
|
|
|
DBG("HDMI Core: %s, HDMI_CTRL=0x%08x",
|
|
|
|
power_on ? "Enable" : "Disable", ctrl);
|
|
|
|
}
|
|
|
|
|
|
|
|
static irqreturn_t hdmi_irq(int irq, void *dev_id)
|
|
|
|
{
|
|
|
|
struct hdmi *hdmi = dev_id;
|
|
|
|
|
|
|
|
/* Process HPD: */
|
|
|
|
hdmi_connector_irq(hdmi->connector);
|
|
|
|
|
|
|
|
/* Process DDC: */
|
|
|
|
hdmi_i2c_irq(hdmi->i2c);
|
|
|
|
|
|
|
|
/* TODO audio.. */
|
|
|
|
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
2013-08-31 00:02:15 +07:00
|
|
|
void hdmi_destroy(struct kref *kref)
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 23:44:06 +07:00
|
|
|
{
|
2013-08-31 00:02:15 +07:00
|
|
|
struct hdmi *hdmi = container_of(kref, struct hdmi, refcount);
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 23:44:06 +07:00
|
|
|
struct hdmi_phy *phy = hdmi->phy;
|
|
|
|
|
|
|
|
if (phy)
|
|
|
|
phy->funcs->destroy(phy);
|
|
|
|
|
|
|
|
if (hdmi->i2c)
|
|
|
|
hdmi_i2c_destroy(hdmi->i2c);
|
|
|
|
|
|
|
|
put_device(&hdmi->pdev->dev);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* initialize connector */
|
2013-08-31 00:02:15 +07:00
|
|
|
int hdmi_init(struct drm_device *dev, struct drm_encoder *encoder)
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 23:44:06 +07:00
|
|
|
{
|
2013-08-31 00:02:15 +07:00
|
|
|
struct hdmi *hdmi = NULL;
|
|
|
|
struct msm_drm_private *priv = dev->dev_private;
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 23:44:06 +07:00
|
|
|
struct platform_device *pdev = hdmi_pdev;
|
|
|
|
struct hdmi_platform_config *config;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (!pdev) {
|
|
|
|
dev_err(dev->dev, "no hdmi device\n");
|
|
|
|
ret = -ENXIO;
|
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
|
|
|
|
config = pdev->dev.platform_data;
|
|
|
|
|
2013-08-31 00:02:15 +07:00
|
|
|
hdmi = kzalloc(sizeof(*hdmi), GFP_KERNEL);
|
|
|
|
if (!hdmi) {
|
|
|
|
ret = -ENOMEM;
|
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
|
|
|
|
kref_init(&hdmi->refcount);
|
|
|
|
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 23:44:06 +07:00
|
|
|
get_device(&pdev->dev);
|
|
|
|
|
|
|
|
hdmi->dev = dev;
|
|
|
|
hdmi->pdev = pdev;
|
2013-08-31 00:02:15 +07:00
|
|
|
hdmi->encoder = encoder;
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 23:44:06 +07:00
|
|
|
|
|
|
|
/* not sure about which phy maps to which msm.. probably I miss some */
|
|
|
|
if (config->phy_init)
|
|
|
|
hdmi->phy = config->phy_init(hdmi);
|
|
|
|
else
|
|
|
|
hdmi->phy = ERR_PTR(-ENXIO);
|
|
|
|
|
|
|
|
if (IS_ERR(hdmi->phy)) {
|
|
|
|
ret = PTR_ERR(hdmi->phy);
|
|
|
|
dev_err(dev->dev, "failed to load phy: %d\n", ret);
|
|
|
|
hdmi->phy = NULL;
|
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
|
|
|
|
hdmi->mmio = msm_ioremap(pdev, "hdmi_msm_hdmi_addr", "HDMI");
|
|
|
|
if (IS_ERR(hdmi->mmio)) {
|
|
|
|
ret = PTR_ERR(hdmi->mmio);
|
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
|
|
|
|
hdmi->mvs = devm_regulator_get(&pdev->dev, "8901_hdmi_mvs");
|
|
|
|
if (IS_ERR(hdmi->mvs))
|
|
|
|
hdmi->mvs = devm_regulator_get(&pdev->dev, "hdmi_mvs");
|
|
|
|
if (IS_ERR(hdmi->mvs)) {
|
|
|
|
ret = PTR_ERR(hdmi->mvs);
|
|
|
|
dev_err(dev->dev, "failed to get mvs regulator: %d\n", ret);
|
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
|
|
|
|
hdmi->mpp0 = devm_regulator_get(&pdev->dev, "8901_mpp0");
|
|
|
|
if (IS_ERR(hdmi->mpp0))
|
|
|
|
hdmi->mpp0 = NULL;
|
|
|
|
|
|
|
|
hdmi->clk = devm_clk_get(&pdev->dev, "core_clk");
|
|
|
|
if (IS_ERR(hdmi->clk)) {
|
|
|
|
ret = PTR_ERR(hdmi->clk);
|
|
|
|
dev_err(dev->dev, "failed to get 'clk': %d\n", ret);
|
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
|
|
|
|
hdmi->m_pclk = devm_clk_get(&pdev->dev, "master_iface_clk");
|
|
|
|
if (IS_ERR(hdmi->m_pclk)) {
|
|
|
|
ret = PTR_ERR(hdmi->m_pclk);
|
|
|
|
dev_err(dev->dev, "failed to get 'm_pclk': %d\n", ret);
|
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
|
|
|
|
hdmi->s_pclk = devm_clk_get(&pdev->dev, "slave_iface_clk");
|
|
|
|
if (IS_ERR(hdmi->s_pclk)) {
|
|
|
|
ret = PTR_ERR(hdmi->s_pclk);
|
|
|
|
dev_err(dev->dev, "failed to get 's_pclk': %d\n", ret);
|
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
|
|
|
|
hdmi->i2c = hdmi_i2c_init(hdmi);
|
|
|
|
if (IS_ERR(hdmi->i2c)) {
|
|
|
|
ret = PTR_ERR(hdmi->i2c);
|
|
|
|
dev_err(dev->dev, "failed to get i2c: %d\n", ret);
|
|
|
|
hdmi->i2c = NULL;
|
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
|
2013-08-31 00:02:15 +07:00
|
|
|
hdmi->bridge = hdmi_bridge_init(hdmi);
|
|
|
|
if (IS_ERR(hdmi->bridge)) {
|
|
|
|
ret = PTR_ERR(hdmi->bridge);
|
|
|
|
dev_err(dev->dev, "failed to create HDMI bridge: %d\n", ret);
|
|
|
|
hdmi->bridge = NULL;
|
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
|
|
|
|
hdmi->connector = hdmi_connector_init(hdmi);
|
|
|
|
if (IS_ERR(hdmi->connector)) {
|
|
|
|
ret = PTR_ERR(hdmi->connector);
|
|
|
|
dev_err(dev->dev, "failed to create HDMI connector: %d\n", ret);
|
|
|
|
hdmi->connector = NULL;
|
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 23:44:06 +07:00
|
|
|
hdmi->irq = platform_get_irq(pdev, 0);
|
|
|
|
if (hdmi->irq < 0) {
|
|
|
|
ret = hdmi->irq;
|
|
|
|
dev_err(dev->dev, "failed to get irq: %d\n", ret);
|
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = devm_request_threaded_irq(&pdev->dev, hdmi->irq,
|
|
|
|
NULL, hdmi_irq, IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
|
|
|
|
"hdmi_isr", hdmi);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(dev->dev, "failed to request IRQ%u: %d\n",
|
|
|
|
hdmi->irq, ret);
|
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
|
2013-08-31 00:02:15 +07:00
|
|
|
encoder->bridge = hdmi->bridge;
|
|
|
|
|
|
|
|
priv->bridges[priv->num_bridges++] = hdmi->bridge;
|
|
|
|
priv->connectors[priv->num_connectors++] = hdmi->connector;
|
|
|
|
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 23:44:06 +07:00
|
|
|
return 0;
|
|
|
|
|
|
|
|
fail:
|
2013-08-31 00:02:15 +07:00
|
|
|
if (hdmi) {
|
|
|
|
/* bridge/connector are normally destroyed by drm: */
|
|
|
|
if (hdmi->bridge)
|
|
|
|
hdmi->bridge->funcs->destroy(hdmi->bridge);
|
|
|
|
if (hdmi->connector)
|
|
|
|
hdmi->connector->funcs->destroy(hdmi->connector);
|
|
|
|
hdmi_destroy(&hdmi->refcount);
|
|
|
|
}
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 23:44:06 +07:00
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The hdmi device:
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int hdmi_dev_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
static struct hdmi_platform_config config = {};
|
|
|
|
#ifdef CONFIG_OF
|
|
|
|
/* TODO */
|
|
|
|
#else
|
|
|
|
if (cpu_is_apq8064()) {
|
|
|
|
config.phy_init = hdmi_phy_8960_init;
|
|
|
|
config.ddc_clk_gpio = 70;
|
|
|
|
config.ddc_data_gpio = 71;
|
|
|
|
config.hpd_gpio = 72;
|
|
|
|
config.pmic_gpio = 13 + NR_GPIO_IRQS;
|
|
|
|
} else if (cpu_is_msm8960()) {
|
|
|
|
config.phy_init = hdmi_phy_8960_init;
|
|
|
|
config.ddc_clk_gpio = 100;
|
|
|
|
config.ddc_data_gpio = 101;
|
|
|
|
config.hpd_gpio = 102;
|
|
|
|
config.pmic_gpio = -1;
|
|
|
|
} else if (cpu_is_msm8x60()) {
|
|
|
|
config.phy_init = hdmi_phy_8x60_init;
|
|
|
|
config.ddc_clk_gpio = 170;
|
|
|
|
config.ddc_data_gpio = 171;
|
|
|
|
config.hpd_gpio = 172;
|
|
|
|
config.pmic_gpio = -1;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
pdev->dev.platform_data = &config;
|
|
|
|
hdmi_pdev = pdev;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int hdmi_dev_remove(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
hdmi_pdev = NULL;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct platform_driver hdmi_driver = {
|
|
|
|
.probe = hdmi_dev_probe,
|
|
|
|
.remove = hdmi_dev_remove,
|
|
|
|
.driver.name = "hdmi_msm",
|
|
|
|
};
|
|
|
|
|
|
|
|
void __init hdmi_register(void)
|
|
|
|
{
|
|
|
|
platform_driver_register(&hdmi_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
void __exit hdmi_unregister(void)
|
|
|
|
{
|
|
|
|
platform_driver_unregister(&hdmi_driver);
|
|
|
|
}
|