AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-27 10:55:15 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
869fef4154
linux_dsm_epyc7002/arch/arm/mach-omap2/include/mach/debug-macro.S

133 lines
3.6 KiB
ArmAsm
Raw Normal View History

omap: headers: Split debug-macro.S for mach-omap1 and mach-omap2 This also creates the include/mach subdirectories under mach-omap1 and mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-20 07:26:17 +07:00
/* arch/arm/mach-omap2/include/mach/debug-macro.S
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
*
* Debugging macro include header
*
* Copyright (C) 1994-1999 Russell King
* Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
omap: Clean the serial port defines This way we don't have conflicts with the defines with compiling in multiple omaps. Set the addresses for uarts in struct omap_globals for the early serial init code. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15 23:48:53 +07:00
#include <linux/serial_reg.h>
omap: Use a memory address for storing the debug port info instead of UART1 scratchpad This removes the dependency to the UART1 being available for storing the debug configuration in uncompress.h. This will simplify the DEBUG_LL UART configuration for boards that may not have UART1, or have an external UART as it requires only one mapping for DEBUG_LL. The patch has a few limitations. Basically now we're assuming that the kernel uncompress code won't overlap with OMAP_UART_INFO. We also assume the printascii is called at least once before paging_init in order for addruart to have a chance to read the UART setup from OMAP_UART_INFO. As suggested by Cyril Chemparathy <cyril@ti.com>, Vikram Pandita <vikram.pandita@ti.com> and Kevin Hilman <khilman@deeprootsystems.com>. Based on an earlier patch posted for Davinci by Cyril Chemparathy <cyril@ti.com>. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-01 07:39:19 +07:00
#include <asm/memory.h>
omap: Clean the serial port defines This way we don't have conflicts with the defines with compiling in multiple omaps. Set the addresses for uarts in struct omap_globals for the early serial init code. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15 23:48:53 +07:00
#include <plat/serial.h>
omap: Make uncompress code and DEBUG_LL code generic Define arch_decomp_setup() the same way as some other architectures do. Use arch_id to configure the debug uart based on the machine_is by storing it into the uart scratchpad register for DEBUG_LL code to use. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15 23:49:01 +07:00
#define UART_OFFSET(addr) ((addr) & 0x00ffffff)
.pushsection .data
omap_uart_phys: .word 0
omap_uart_virt: .word 0
omap_uart_lsr: .word 0
.popsection
/*
* Note that this code won't work if the bootloader passes
* a wrong machine ID number in r1. To debug, just hardcode
* the desired UART phys and virt addresses temporarily into
* the omap_uart_phys and omap_uart_virt above.
*/
ARM: 5910/1: ARM: Add tmp register for addruart and loadsp Otherwise more complicated uart configuration won't be possible. We can use r1 for tmp register for both head.S and debug.S. NOTE: This patch depends on another patch to add the the tmp register into all debug-macro.S files. That can be done with: $ sed -i -e "s/addruart,rx|addruart, rx/addruart, rx, tmp/" arch/arm/*/include/*/debug-macro.S Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-02 05:26:53 +07:00
.macro addruart, rx, tmp
omap: Make uncompress code and DEBUG_LL code generic Define arch_decomp_setup() the same way as some other architectures do. Use arch_id to configure the debug uart based on the machine_is by storing it into the uart scratchpad register for DEBUG_LL code to use. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15 23:49:01 +07:00
/* Use omap_uart_phys/virt if already configured */
10: mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =omap_uart_phys @ physical base address
ldrne \rx, =omap_uart_virt @ virtual base address
ldr \rx, [\rx, #0]
cmp \rx, #0 @ is port configured?
bne 99f @ already configured
omap: Use a memory address for storing the debug port info instead of UART1 scratchpad This removes the dependency to the UART1 being available for storing the debug configuration in uncompress.h. This will simplify the DEBUG_LL UART configuration for boards that may not have UART1, or have an external UART as it requires only one mapping for DEBUG_LL. The patch has a few limitations. Basically now we're assuming that the kernel uncompress code won't overlap with OMAP_UART_INFO. We also assume the printascii is called at least once before paging_init in order for addruart to have a chance to read the UART setup from OMAP_UART_INFO. As suggested by Cyril Chemparathy <cyril@ti.com>, Vikram Pandita <vikram.pandita@ti.com> and Kevin Hilman <khilman@deeprootsystems.com>. Based on an earlier patch posted for Davinci by Cyril Chemparathy <cyril@ti.com>. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-01 07:39:19 +07:00
/* Check the debug UART configuration set in uncompress.h */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
omap: Use a memory address for storing the debug port info instead of UART1 scratchpad This removes the dependency to the UART1 being available for storing the debug configuration in uncompress.h. This will simplify the DEBUG_LL UART configuration for boards that may not have UART1, or have an external UART as it requires only one mapping for DEBUG_LL. The patch has a few limitations. Basically now we're assuming that the kernel uncompress code won't overlap with OMAP_UART_INFO. We also assume the printascii is called at least once before paging_init in order for addruart to have a chance to read the UART setup from OMAP_UART_INFO. As suggested by Cyril Chemparathy <cyril@ti.com>, Vikram Pandita <vikram.pandita@ti.com> and Kevin Hilman <khilman@deeprootsystems.com>. Based on an earlier patch posted for Davinci by Cyril Chemparathy <cyril@ti.com>. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-01 07:39:19 +07:00
ldreq \rx, =OMAP_UART_INFO
ldrne \rx, =__phys_to_virt(OMAP_UART_INFO)
ldr \rx, [\rx, #0]
omap: Make uncompress code and DEBUG_LL code generic Define arch_decomp_setup() the same way as some other architectures do. Use arch_id to configure the debug uart based on the machine_is by storing it into the uart scratchpad register for DEBUG_LL code to use. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15 23:49:01 +07:00
/* Select the UART to use based on the UART1 scratchpad value */
cmp \rx, #0 @ no port configured?
beq 21f @ if none, try to use UART1
cmp \rx, #OMAP2UART1 @ OMAP2/3/4UART1
beq 21f @ configure OMAP2/3/4UART1
cmp \rx, #OMAP2UART2 @ OMAP2/3/4UART2
beq 22f @ configure OMAP2/3/4UART2
cmp \rx, #OMAP2UART3 @ only on 24xx
beq 23f @ configure OMAP2UART3
cmp \rx, #OMAP3UART3 @ only on 34xx
beq 33f @ configure OMAP3UART3
cmp \rx, #OMAP4UART3 @ only on 44xx
beq 43f @ configure OMAP4UART3
cmp \rx, #OMAP3UART4 @ only on 36xx
beq 34f @ configure OMAP3UART4
cmp \rx, #OMAP4UART4 @ only on 44xx
beq 44f @ configure OMAP4UART4
cmp \rx, #ZOOM_UART @ only on zoom2/3
beq 95f @ configure ZOOM_UART
/* Configure the UART offset from the phys/virt base */
21: mov \rx, #UART_OFFSET(OMAP2_UART1_BASE) @ omap2/3/4
b 98f
22: mov \rx, #UART_OFFSET(OMAP2_UART2_BASE) @ omap2/3/4
b 98f
23: mov \rx, #UART_OFFSET(OMAP2_UART3_BASE)
b 98f
33: mov \rx, #UART_OFFSET(OMAP3_UART1_BASE)
add \rx, \rx, #0x00fb0000
add \rx, \rx, #0x00006000 @ OMAP3_UART3_BASE
b 98f
34: mov \rx, #UART_OFFSET(OMAP3_UART1_BASE)
add \rx, \rx, #0x00fb0000
add \rx, \rx, #0x00028000 @ OMAP3_UART4_BASE
b 98f
43: mov \rx, #UART_OFFSET(OMAP4_UART3_BASE)
b 98f
44: mov \rx, #UART_OFFSET(OMAP4_UART4_BASE)
b 98f
omap2/3: Fix DEBUG_LL for omap zoom2/3 Zoom2 and 3 have UARTs only on the external debug board. GPMC needs to be mapped early to use it for DEBUG_LL. Additionally, 0xfb000000 overlaps with other areas, so use 0xfa400000 for the virtual address instead. Note that with the pending serial.c patches you need to set console=ttyS0,115200n8 as it will be the only UART mapped. To use DEBUG_LL, you need to pass also earlyprintk in cmdline. Cc: Allen Pais <allen.pais@ti.com> Acked-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-01 02:57:14 +07:00
95: ldr \rx, =ZOOM_UART_BASE
omap: Make uncompress code and DEBUG_LL code generic Define arch_decomp_setup() the same way as some other architectures do. Use arch_id to configure the debug uart based on the machine_is by storing it into the uart scratchpad register for DEBUG_LL code to use. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15 23:49:01 +07:00
ldr \tmp, =omap_uart_phys
str \rx, [\tmp, #0]
omap2/3: Fix DEBUG_LL for omap zoom2/3 Zoom2 and 3 have UARTs only on the external debug board. GPMC needs to be mapped early to use it for DEBUG_LL. Additionally, 0xfb000000 overlaps with other areas, so use 0xfa400000 for the virtual address instead. Note that with the pending serial.c patches you need to set console=ttyS0,115200n8 as it will be the only UART mapped. To use DEBUG_LL, you need to pass also earlyprintk in cmdline. Cc: Allen Pais <allen.pais@ti.com> Acked-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-01 02:57:14 +07:00
ldr \rx, =ZOOM_UART_VIRT
omap: Make uncompress code and DEBUG_LL code generic Define arch_decomp_setup() the same way as some other architectures do. Use arch_id to configure the debug uart based on the machine_is by storing it into the uart scratchpad register for DEBUG_LL code to use. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15 23:49:01 +07:00
ldr \tmp, =omap_uart_virt
str \rx, [\tmp, #0]
mov \rx, #(UART_LSR << ZOOM_PORT_SHIFT)
ldr \tmp, =omap_uart_lsr
str \rx, [\tmp, #0]
b 10b
/* Store both phys and virt address for the uart */
98: add \rx, \rx, #0x48000000 @ phys base
ldr \tmp, =omap_uart_phys
str \rx, [\tmp, #0]
sub \rx, \rx, #0x48000000 @ phys base
add \rx, \rx, #0xfa000000 @ virt base
ldr \tmp, =omap_uart_virt
str \rx, [\tmp, #0]
mov \rx, #(UART_LSR << OMAP_PORT_SHIFT)
ldr \tmp, =omap_uart_lsr
str \rx, [\tmp, #0]
b 10b
99:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
.endm
.macro senduart,rd,rx
strb \rd, [\rx]
.endm
.macro busyuart,rd,rx
omap: Make uncompress code and DEBUG_LL code generic Define arch_decomp_setup() the same way as some other architectures do. Use arch_id to configure the debug uart based on the machine_is by storing it into the uart scratchpad register for DEBUG_LL code to use. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15 23:49:01 +07:00
1001: ldr \rd, =omap_uart_lsr
ldr \rd, [\rd, #0]
ldrb \rd, [\rx, \rd]
omap: Clean the serial port defines This way we don't have conflicts with the defines with compiling in multiple omaps. Set the addresses for uarts in struct omap_globals for the early serial init code. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15 23:48:53 +07:00
and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
teq \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
bne 1001b
.endm
.macro waituart,rd,rx
.endm
Reference in New Issue Copy Permalink