linux_dsm_epyc7002/drivers/mmc/host/tmio_mmc.c

156 lines
3.4 KiB
C
Raw Normal View History

/*
* linux/drivers/mmc/host/tmio_mmc.c
*
* Copyright (C) 2007 Ian Molton
* Copyright (C) 2004 Ian Molton
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Driver for the MMC / SD / SDIO cell found in:
*
* TC6393XB TC6391XB TC6387XB T7L66XB ASIC3
*/
#include <linux/device.h>
#include <linux/mfd/core.h>
#include <linux/mfd/tmio.h>
#include <linux/mmc/host.h>
#include <linux/module.h>
#include <linux/pagemap.h>
#include <linux/scatterlist.h>
mmc: tmio_mmc: handle missing HW interrupts When doing excessive hotplug, e.g., repeated insert/eject operations, the hardware may get confused to a point where no CMDTIMEOUT/CMDRESPEND interrupts are generated any more. As a result requests get stuck, e.g.: [ 360.351562] INFO: task kworker/u:0:5 blocked for more than 120 seconds. [ 360.351562] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 360.359375] kworker/u:0 D c020c2b4 0 5 2 0x00000000 [ 360.367187] Backtrace: [ 360.367187] [<c020bfb0>] (schedule+0x0/0x340) from [<c020c480>] (schedule_timeout+0x20/0x190) [ 360.375000] r8:c702fd70 r7:00000002 r6:c702e000 r5:c702fdc4 r4:7fffffff [ 360.375000] r3:c701e040 [ 360.382812] [<c020c460>] (schedule_timeout+0x0/0x190) from [<c020be78>] (wait_for_common+0xc4/0x150) [ 360.390625] r6:c702e000 r5:c702fdc4 r4:7fffffff [ 360.390625] [<c020bdb4>] (wait_for_common+0x0/0x150) from [<c020bfac>] (wait_for_completion+0x18/0x1c) [ 360.398437] [<c020bf94>] (wait_for_completion+0x0/0x1c) from [<c0185590>] (mmc_wait_for_req+0x214/0x234) [ 360.406250] [<c018537c>] (mmc_wait_for_req+0x0/0x234) from [<c01889d0>] (mmc_sd_switch+0xfc/0x114) [ 360.414062] r7:c702fe4c r6:c702fe20 r5:c7179800 r4:00fffff0 [ 360.421875] [<c01888d4>] (mmc_sd_switch+0x0/0x114) from [<c0187f70>] (mmc_sd_setup_card+0x260/0x384) [ 360.429687] [<c0187d10>] (mmc_sd_setup_card+0x0/0x384) from [<c01885e0>] (mmc_sd_init_card+0x13c/0x1e0) [ 360.437500] [<c01884a4>] (mmc_sd_init_card+0x0/0x1e0) from [<c01887a8>] (mmc_attach_sd+0x124/0x1a8) [ 360.445312] r8:c02db404 r7:ffffff92 r6:c702ff34 r5:c6007da8 r4:c6007c00 [ 360.453125] [<c0188684>] (mmc_attach_sd+0x0/0x1a8) from [<c0185140>] (mmc_rescan+0x248/0x2f0) [ 360.460937] r5:c6007da8 r4:c6007c00 [ 360.468750] [<c0184ef8>] (mmc_rescan+0x0/0x2f0) from [<c00467f0>] (process_one_work+0x1ec/0x318) [ 360.476562] r7:c6007da8 r6:00000000 r5:c710ec00 r4:c701bde0 [ 360.484375] [<c0046604>] (process_one_work+0x0/0x318) from [<c0047fb0>] (worker_thread+0x1b0/0x2cc) [ 360.492187] [<c0047e00>] (worker_thread+0x0/0x2cc) from [<c004b338>] (kthread+0x8c/0x94) [ 360.500000] [<c004b2ac>] (kthread+0x0/0x94) from [<c0037fc4>] (do_exit+0x0/0x590) [ 360.507812] r7:00000013 r6:c0037fc4 r5:c004b2ac r4:c7021f00 This patch addresses this problem by introducing timeouts for outstanding interrupts. If a hardware interrupt is missing, a soft reset will be performed to bring the hardware back to a working state. Tested with the SDHI hardware block in sh7372 / AP4EVB. Signed-off-by: Arnd Hannemann <arnd@arndnet.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-06 05:36:14 +07:00
#include "tmio_mmc.h"
#ifdef CONFIG_PM_SLEEP
static int tmio_mmc_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
const struct mfd_cell *cell = mfd_get_cell(pdev);
int ret;
ret = tmio_mmc_host_suspend(dev);
/* Tell MFD core it can disable us now.*/
if (!ret && cell->disable)
cell->disable(pdev);
return ret;
}
static int tmio_mmc_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
const struct mfd_cell *cell = mfd_get_cell(pdev);
int ret = 0;
/* Tell the MFD core we are ready to be enabled */
if (cell->resume)
ret = cell->resume(pdev);
if (!ret)
ret = tmio_mmc_host_resume(dev);
return ret;
}
#endif
static int tmio_mmc_probe(struct platform_device *pdev)
{
const struct mfd_cell *cell = mfd_get_cell(pdev);
struct tmio_mmc_data *pdata;
struct tmio_mmc_host *host;
struct resource *res;
int ret = -EINVAL, irq;
if (pdev->num_resources != 2)
goto out;
pdata = pdev->dev.platform_data;
if (!pdata || !pdata->hclk)
goto out;
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
ret = irq;
goto out;
}
/* Tell the MFD core we are ready to be enabled */
if (cell->enable) {
ret = cell->enable(pdev);
if (ret)
goto out;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -EINVAL;
/* SD control register space size is 0x200, 0x400 for bus_shift=1 */
pdata->bus_shift = resource_size(res) >> 10;
pdata->flags |= TMIO_MMC_HAVE_HIGH_REG;
ret = tmio_mmc_host_probe(&host, pdev, pdata);
if (ret)
goto cell_disable;
ret = request_irq(irq, tmio_mmc_irq, IRQF_TRIGGER_FALLING,
dev_name(&pdev->dev), host);
if (ret)
goto host_remove;
pr_info("%s at 0x%08lx irq %d\n", mmc_hostname(host->mmc),
(unsigned long)host->ctl, irq);
return 0;
host_remove:
tmio_mmc_host_remove(host);
cell_disable:
if (cell->disable)
cell->disable(pdev);
out:
return ret;
}
static int tmio_mmc_remove(struct platform_device *pdev)
{
const struct mfd_cell *cell = mfd_get_cell(pdev);
struct mmc_host *mmc = platform_get_drvdata(pdev);
if (mmc) {
struct tmio_mmc_host *host = mmc_priv(mmc);
free_irq(platform_get_irq(pdev, 0), host);
tmio_mmc_host_remove(host);
if (cell->disable)
cell->disable(pdev);
}
return 0;
}
/* ------------------- device registration ----------------------- */
static const struct dev_pm_ops tmio_mmc_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(tmio_mmc_suspend, tmio_mmc_resume)
};
static struct platform_driver tmio_mmc_driver = {
.driver = {
.name = "tmio-mmc",
.owner = THIS_MODULE,
.pm = &tmio_mmc_dev_pm_ops,
},
.probe = tmio_mmc_probe,
.remove = tmio_mmc_remove,
};
module_platform_driver(tmio_mmc_driver);
MODULE_DESCRIPTION("Toshiba TMIO SD/MMC driver");
MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:tmio-mmc");