AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-27 04:41:01 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
8421c60446
linux_dsm_epyc7002/arch/arm64/kernel/hyp-stub.S

140 lines
3.6 KiB
ArmAsm
Raw Normal View History

arm64: add hypervisor stub If booted in EL2, install an dummy hypervisor whose only purpose is to be replaced by a full fledged one. A minimal API allows to: - obtain the current HYP vectors (__hyp_get_vectors) - set new HYP vectors (__hyp_set_vectors) Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2012-10-19 23:46:27 +07:00
/*
* Hypervisor stub
*
* Copyright (C) 2012 ARM Ltd.
* Author: Marc Zyngier <marc.zyngier@arm.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/init.h>
#include <linux/linkage.h>
irqchip: gic-v3: Initial support for GICv3 The Generic Interrupt Controller (version 3) offers services that are similar to GICv2, with a number of additional features: - Affinity routing based on the CPU MPIDR (ARE) - System register for the CPU interfaces (SRE) - Support for more that 8 CPUs - Locality-specific Peripheral Interrupts (LPIs) - Interrupt Translation Services (ITS) This patch adds preliminary support for GICv3 with ARE and SRE, non-secure mode only. It relies on higher exception levels to grant ARE and SRE access. Support for LPI and ITS will be added at a later time. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Zi Shen Lim <zlim@broadcom.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Tirumalesh Chalamarla <tchalamarla@cavium.com> Reviewed-by: Yun Wu <wuyun.wu@huawei.com> Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com> Tested-by: Tirumalesh Chalamarla<tchalamarla@cavium.com> Tested-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Acked-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Link: https://lkml.kernel.org/r/1404140510-5382-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30 22:01:31 +07:00
#include <linux/irqchip/arm-gic-v3.h>
arm64: add hypervisor stub If booted in EL2, install an dummy hypervisor whose only purpose is to be replaced by a full fledged one. A minimal API allows to: - obtain the current HYP vectors (__hyp_get_vectors) - set new HYP vectors (__hyp_set_vectors) Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2012-10-19 23:46:27 +07:00
#include <asm/assembler.h>
arm64: hyp/kvm: Make hyp-stub extensible The existing arm64 hcall implementations are limited in that they only allow for two distinct hcalls; with the x0 register either zero or not zero. Also, the API of the hyp-stub exception vector routines and the KVM exception vector routines differ; hyp-stub uses a non-zero value in x0 to implement __hyp_set_vectors, whereas KVM uses it to implement kvm_call_hyp. To allow for additional hcalls to be defined and to make the arm64 hcall API more consistent across exception vector routines, change the hcall implementations to reserve all x0 values below 0xfff for hcalls such as {s,g}et_vectors(). Define two new preprocessor macros HVC_GET_VECTORS, and HVC_SET_VECTORS to be used as hcall type specifiers and convert the existing __hyp_get_vectors() and __hyp_set_vectors() routines to use these new macros when executing an HVC call. Also, change the corresponding hyp-stub and KVM el1_sync exception vector routines to use these new macros. Signed-off-by: Geoff Levand <geoff@infradead.org> [Merged two hcall patches, moved immediate value from esr to x0, use lr as a scratch register, changed limit to 0xfff] Signed-off-by: James Morse <james.morse@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-27 23:47:03 +07:00
#include <asm/kvm_arm.h>
arm64: hyp/kvm: Make hyp-stub reject kvm_call_hyp() A later patch implements kvm_arch_hardware_disable(), to remove kvm from el2, and re-instate the hyp-stub. This can happen while guests are running, particularly when kvm_reboot() calls kvm_arch_hardware_disable() on each cpu. This can interrupt a guest, remove kvm, then allow the guest to be scheduled again. This causes kvm_call_hyp() to be run against the hyp-stub. Change the hyp-stub to return a new exception type when this happens, and add code to kvm's handle_exit() to tell userspace we failed to enter the guest. Signed-off-by: James Morse <james.morse@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-27 23:47:04 +07:00
#include <asm/kvm_asm.h>
arm64: add hypervisor stub If booted in EL2, install an dummy hypervisor whose only purpose is to be replaced by a full fledged one. A minimal API allows to: - obtain the current HYP vectors (__hyp_get_vectors) - set new HYP vectors (__hyp_set_vectors) Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2012-10-19 23:46:27 +07:00
#include <asm/ptrace.h>
#include <asm/virt.h>
.text
.align 11
ENTRY(__hyp_stub_vectors)
ventry el2_sync_invalid // Synchronous EL2t
ventry el2_irq_invalid // IRQ EL2t
ventry el2_fiq_invalid // FIQ EL2t
ventry el2_error_invalid // Error EL2t
ventry el2_sync_invalid // Synchronous EL2h
ventry el2_irq_invalid // IRQ EL2h
ventry el2_fiq_invalid // FIQ EL2h
ventry el2_error_invalid // Error EL2h
ventry el1_sync // Synchronous 64-bit EL1
ventry el1_irq_invalid // IRQ 64-bit EL1
ventry el1_fiq_invalid // FIQ 64-bit EL1
ventry el1_error_invalid // Error 64-bit EL1
ventry el1_sync_invalid // Synchronous 32-bit EL1
ventry el1_irq_invalid // IRQ 32-bit EL1
ventry el1_fiq_invalid // FIQ 32-bit EL1
ventry el1_error_invalid // Error 32-bit EL1
ENDPROC(__hyp_stub_vectors)
.align 11
el1_sync:
arm64: hyp/kvm: Make hyp-stub extensible The existing arm64 hcall implementations are limited in that they only allow for two distinct hcalls; with the x0 register either zero or not zero. Also, the API of the hyp-stub exception vector routines and the KVM exception vector routines differ; hyp-stub uses a non-zero value in x0 to implement __hyp_set_vectors, whereas KVM uses it to implement kvm_call_hyp. To allow for additional hcalls to be defined and to make the arm64 hcall API more consistent across exception vector routines, change the hcall implementations to reserve all x0 values below 0xfff for hcalls such as {s,g}et_vectors(). Define two new preprocessor macros HVC_GET_VECTORS, and HVC_SET_VECTORS to be used as hcall type specifiers and convert the existing __hyp_get_vectors() and __hyp_set_vectors() routines to use these new macros when executing an HVC call. Also, change the corresponding hyp-stub and KVM el1_sync exception vector routines to use these new macros. Signed-off-by: Geoff Levand <geoff@infradead.org> [Merged two hcall patches, moved immediate value from esr to x0, use lr as a scratch register, changed limit to 0xfff] Signed-off-by: James Morse <james.morse@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-27 23:47:03 +07:00
mrs x30, esr_el2
lsr x30, x30, #ESR_ELx_EC_SHIFT
cmp x30, #ESR_ELx_EC_HVC64
b.ne 9f // Not an HVC trap
cmp x0, #HVC_GET_VECTORS
b.ne 1f
mrs x0, vbar_el2
b 9f
1: cmp x0, #HVC_SET_VECTORS
b.ne 2f
msr vbar_el2, x1
b 9f
arm64: Add back cpu reset routines Commit 68234df4ea79 ("arm64: kill flush_cache_all()") removed the global arm64 routines cpu_reset() and cpu_soft_restart() needed by the arm64 kexec and kdump support. Add back a simplified version of cpu_soft_restart() with some changes needed for kexec in the new files cpu_reset.S, and cpu_reset.h. When a CPU is reset it needs to be put into the exception level it had when it entered the kernel. Update cpu_soft_restart() to accept an argument which signals if the reset address should be entered at EL1 or EL2, and add a new hypercall HVC_SOFT_RESTART which is used for the EL2 switch. Signed-off-by: Geoff Levand <geoff@infradead.org> Reviewed-by: James Morse <james.morse@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-24 00:54:48 +07:00
2: cmp x0, #HVC_SOFT_RESTART
b.ne 3f
mov x0, x2
mov x2, x4
mov x4, x1
mov x1, x3
br x4 // no return
arm64: hyp/kvm: Make hyp-stub reject kvm_call_hyp() A later patch implements kvm_arch_hardware_disable(), to remove kvm from el2, and re-instate the hyp-stub. This can happen while guests are running, particularly when kvm_reboot() calls kvm_arch_hardware_disable() on each cpu. This can interrupt a guest, remove kvm, then allow the guest to be scheduled again. This causes kvm_call_hyp() to be run against the hyp-stub. Change the hyp-stub to return a new exception type when this happens, and add code to kvm's handle_exit() to tell userspace we failed to enter the guest. Signed-off-by: James Morse <james.morse@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-27 23:47:04 +07:00
/* Someone called kvm_call_hyp() against the hyp-stub... */
arm64: Add back cpu reset routines Commit 68234df4ea79 ("arm64: kill flush_cache_all()") removed the global arm64 routines cpu_reset() and cpu_soft_restart() needed by the arm64 kexec and kdump support. Add back a simplified version of cpu_soft_restart() with some changes needed for kexec in the new files cpu_reset.S, and cpu_reset.h. When a CPU is reset it needs to be put into the exception level it had when it entered the kernel. Update cpu_soft_restart() to accept an argument which signals if the reset address should be entered at EL1 or EL2, and add a new hypercall HVC_SOFT_RESTART which is used for the EL2 switch. Signed-off-by: Geoff Levand <geoff@infradead.org> Reviewed-by: James Morse <james.morse@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-24 00:54:48 +07:00
3: mov x0, #ARM_EXCEPTION_HYP_GONE
arm64: hyp/kvm: Make hyp-stub extensible The existing arm64 hcall implementations are limited in that they only allow for two distinct hcalls; with the x0 register either zero or not zero. Also, the API of the hyp-stub exception vector routines and the KVM exception vector routines differ; hyp-stub uses a non-zero value in x0 to implement __hyp_set_vectors, whereas KVM uses it to implement kvm_call_hyp. To allow for additional hcalls to be defined and to make the arm64 hcall API more consistent across exception vector routines, change the hcall implementations to reserve all x0 values below 0xfff for hcalls such as {s,g}et_vectors(). Define two new preprocessor macros HVC_GET_VECTORS, and HVC_SET_VECTORS to be used as hcall type specifiers and convert the existing __hyp_get_vectors() and __hyp_set_vectors() routines to use these new macros when executing an HVC call. Also, change the corresponding hyp-stub and KVM el1_sync exception vector routines to use these new macros. Signed-off-by: Geoff Levand <geoff@infradead.org> [Merged two hcall patches, moved immediate value from esr to x0, use lr as a scratch register, changed limit to 0xfff] Signed-off-by: James Morse <james.morse@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-27 23:47:03 +07:00
9: eret
arm64: add hypervisor stub If booted in EL2, install an dummy hypervisor whose only purpose is to be replaced by a full fledged one. A minimal API allows to: - obtain the current HYP vectors (__hyp_get_vectors) - set new HYP vectors (__hyp_set_vectors) Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2012-10-19 23:46:27 +07:00
ENDPROC(el1_sync)
.macro invalid_vector label
\label:
b \label
ENDPROC(\label)
.endm
invalid_vector el2_sync_invalid
invalid_vector el2_irq_invalid
invalid_vector el2_fiq_invalid
invalid_vector el2_error_invalid
invalid_vector el1_sync_invalid
invalid_vector el1_irq_invalid
invalid_vector el1_fiq_invalid
invalid_vector el1_error_invalid
/*
* __hyp_set_vectors: Call this after boot to set the initial hypervisor
* vectors as part of hypervisor installation. On an SMP system, this should
* be called on each CPU.
*
* x0 must be the physical address of the new vector table, and must be
* 2KB aligned.
*
* Before calling this, you must check that the stub hypervisor is installed
* everywhere, by waiting for any secondary CPUs to be brought up and then
* checking that is_hyp_mode_available() is true.
*
* If not, there is a pre-existing hypervisor, some CPUs failed to boot, or
* something else went wrong... in such cases, trying to install a new
* hypervisor is unlikely to work as desired.
*
* When you call into your shiny new hypervisor, sp_el2 will contain junk,
* so you will need to set that to something sensible at the new hypervisor's
* initialisation entry point.
*/
ENTRY(__hyp_get_vectors)
arm64: kvm: Move lr save/restore from do_el2_call into EL1 Today the 'hvc' calling KVM or the hyp-stub is expected to preserve all registers. KVM saves/restores the registers it needs on the EL2 stack using do_el2_call(). The hyp-stub has no stack, later patches need to be able to be able to clobber the link register. Move the link register save/restore to the the call sites. Signed-off-by: James Morse <james.morse@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-27 23:47:02 +07:00
str lr, [sp, #-16]!
arm64: hyp/kvm: Make hyp-stub extensible The existing arm64 hcall implementations are limited in that they only allow for two distinct hcalls; with the x0 register either zero or not zero. Also, the API of the hyp-stub exception vector routines and the KVM exception vector routines differ; hyp-stub uses a non-zero value in x0 to implement __hyp_set_vectors, whereas KVM uses it to implement kvm_call_hyp. To allow for additional hcalls to be defined and to make the arm64 hcall API more consistent across exception vector routines, change the hcall implementations to reserve all x0 values below 0xfff for hcalls such as {s,g}et_vectors(). Define two new preprocessor macros HVC_GET_VECTORS, and HVC_SET_VECTORS to be used as hcall type specifiers and convert the existing __hyp_get_vectors() and __hyp_set_vectors() routines to use these new macros when executing an HVC call. Also, change the corresponding hyp-stub and KVM el1_sync exception vector routines to use these new macros. Signed-off-by: Geoff Levand <geoff@infradead.org> [Merged two hcall patches, moved immediate value from esr to x0, use lr as a scratch register, changed limit to 0xfff] Signed-off-by: James Morse <james.morse@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-27 23:47:03 +07:00
mov x0, #HVC_GET_VECTORS
arm64: add hypervisor stub If booted in EL2, install an dummy hypervisor whose only purpose is to be replaced by a full fledged one. A minimal API allows to: - obtain the current HYP vectors (__hyp_get_vectors) - set new HYP vectors (__hyp_set_vectors) Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2012-10-19 23:46:27 +07:00
hvc #0
arm64: kvm: Move lr save/restore from do_el2_call into EL1 Today the 'hvc' calling KVM or the hyp-stub is expected to preserve all registers. KVM saves/restores the registers it needs on the EL2 stack using do_el2_call(). The hyp-stub has no stack, later patches need to be able to be able to clobber the link register. Move the link register save/restore to the the call sites. Signed-off-by: James Morse <james.morse@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-27 23:47:02 +07:00
ldr lr, [sp], #16
arm64: add hypervisor stub If booted in EL2, install an dummy hypervisor whose only purpose is to be replaced by a full fledged one. A minimal API allows to: - obtain the current HYP vectors (__hyp_get_vectors) - set new HYP vectors (__hyp_set_vectors) Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2012-10-19 23:46:27 +07:00
ret
ENDPROC(__hyp_get_vectors)
arm64: kvm: Move lr save/restore from do_el2_call into EL1 Today the 'hvc' calling KVM or the hyp-stub is expected to preserve all registers. KVM saves/restores the registers it needs on the EL2 stack using do_el2_call(). The hyp-stub has no stack, later patches need to be able to be able to clobber the link register. Move the link register save/restore to the the call sites. Signed-off-by: James Morse <james.morse@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-27 23:47:02 +07:00
ENTRY(__hyp_set_vectors)
str lr, [sp, #-16]!
arm64: hyp/kvm: Make hyp-stub extensible The existing arm64 hcall implementations are limited in that they only allow for two distinct hcalls; with the x0 register either zero or not zero. Also, the API of the hyp-stub exception vector routines and the KVM exception vector routines differ; hyp-stub uses a non-zero value in x0 to implement __hyp_set_vectors, whereas KVM uses it to implement kvm_call_hyp. To allow for additional hcalls to be defined and to make the arm64 hcall API more consistent across exception vector routines, change the hcall implementations to reserve all x0 values below 0xfff for hcalls such as {s,g}et_vectors(). Define two new preprocessor macros HVC_GET_VECTORS, and HVC_SET_VECTORS to be used as hcall type specifiers and convert the existing __hyp_get_vectors() and __hyp_set_vectors() routines to use these new macros when executing an HVC call. Also, change the corresponding hyp-stub and KVM el1_sync exception vector routines to use these new macros. Signed-off-by: Geoff Levand <geoff@infradead.org> [Merged two hcall patches, moved immediate value from esr to x0, use lr as a scratch register, changed limit to 0xfff] Signed-off-by: James Morse <james.morse@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-27 23:47:03 +07:00
mov x1, x0
mov x0, #HVC_SET_VECTORS
arm64: kvm: Move lr save/restore from do_el2_call into EL1 Today the 'hvc' calling KVM or the hyp-stub is expected to preserve all registers. KVM saves/restores the registers it needs on the EL2 stack using do_el2_call(). The hyp-stub has no stack, later patches need to be able to be able to clobber the link register. Move the link register save/restore to the the call sites. Signed-off-by: James Morse <james.morse@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-04-27 23:47:02 +07:00
hvc #0
ldr lr, [sp], #16
ret
arm64: add hypervisor stub If booted in EL2, install an dummy hypervisor whose only purpose is to be replaced by a full fledged one. A minimal API allows to: - obtain the current HYP vectors (__hyp_get_vectors) - set new HYP vectors (__hyp_set_vectors) Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2012-10-19 23:46:27 +07:00
ENDPROC(__hyp_set_vectors)
Reference in New Issue Copy Permalink