linux_dsm_epyc7002/drivers/gpu/drm/i915/i915_gem_context.c

1388 lines
36 KiB
C
Raw Normal View History

drm/i915: preliminary context support Very basic code for context setup/destruction in the driver. Adds the file i915_gem_context.c This file implements HW context support. On gen5+ a HW context consists of an opaque GPU object which is referenced at times of context saves and restores. With RC6 enabled, the context is also referenced as the GPU enters and exists from RC6 (GPU has it's own internal power context, except on gen5). Though something like a context does exist for the media ring, the code only supports contexts for the render ring. In software, there is a distinction between contexts created by the user, and the default HW context. The default HW context is used by GPU clients that do not request setup of their own hardware context. The default context's state is never restored to help prevent programming errors. This would happen if a client ran and piggy-backed off another clients GPU state. The default context only exists to give the GPU some offset to load as the current to invoke a save of the context we actually care about. In fact, the code could likely be constructed, albeit in a more complicated fashion, to never use the default context, though that limits the driver's ability to swap out, and/or destroy other contexts. All other contexts are created as a request by the GPU client. These contexts store GPU state, and thus allow GPU clients to not re-emit state (and potentially query certain state) at any time. The kernel driver makes certain that the appropriate commands are inserted. There are 4 entry points into the contexts, init, fini, open, close. The names are self-explanatory except that init can be called during reset, and also during pm thaw/resume. As we expect our context to be preserved across these events, we do not reinitialize in this case. As Adam Jackson pointed out, The cutoff of 1MB where a HW context is considered too big is arbitrary. The reason for this is even though context sizes are increasing with every generation, they have yet to eclipse even 32k. If we somehow read back way more than that, it probably means BIOS has done something strange, or we're running on a platform that wasn't designed for this. v2: rename load/unload to init/fini (daniel) remove ILK support for get_size() (indirectly daniel) add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel) added comments (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-05 04:42:42 +07:00
/*
* Copyright © 2011-2012 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
* Authors:
* Ben Widawsky <ben@bwidawsk.net>
*
*/
/*
* This file implements HW context support. On gen5+ a HW context consists of an
* opaque GPU object which is referenced at times of context saves and restores.
* With RC6 enabled, the context is also referenced as the GPU enters and exists
* from RC6 (GPU has it's own internal power context, except on gen5). Though
* something like a context does exist for the media ring, the code only
* supports contexts for the render ring.
*
* In software, there is a distinction between contexts created by the user,
* and the default HW context. The default HW context is used by GPU clients
* that do not request setup of their own hardware context. The default
* context's state is never restored to help prevent programming errors. This
* would happen if a client ran and piggy-backed off another clients GPU state.
* The default context only exists to give the GPU some offset to load as the
* current to invoke a save of the context we actually care about. In fact, the
* code could likely be constructed, albeit in a more complicated fashion, to
* never use the default context, though that limits the driver's ability to
* swap out, and/or destroy other contexts.
*
* All other contexts are created as a request by the GPU client. These contexts
* store GPU state, and thus allow GPU clients to not re-emit state (and
* potentially query certain state) at any time. The kernel driver makes
* certain that the appropriate commands are inserted.
*
* The context life cycle is semi-complicated in that context BOs may live
* longer than the context itself because of the way the hardware, and object
* tracking works. Below is a very crude representation of the state machine
* describing the context life.
* refcount pincount active
* S0: initial state 0 0 0
* S1: context created 1 0 0
* S2: context is currently running 2 1 X
* S3: GPU referenced, but not current 2 0 1
* S4: context is current, but destroyed 1 1 0
* S5: like S3, but destroyed 1 0 1
*
* The most common (but not all) transitions:
* S0->S1: client creates a context
* S1->S2: client submits execbuf with context
* S2->S3: other clients submits execbuf with context
* S3->S1: context object was retired
* S3->S2: clients submits another execbuf
* S2->S4: context destroy called with current context
* S3->S5->S0: destroy path
* S4->S5->S0: destroy path on current context
*
* There are two confusing terms used above:
* The "current context" means the context which is currently running on the
* GPU. The GPU has loaded its state already and has stored away the gtt
drm/i915: preliminary context support Very basic code for context setup/destruction in the driver. Adds the file i915_gem_context.c This file implements HW context support. On gen5+ a HW context consists of an opaque GPU object which is referenced at times of context saves and restores. With RC6 enabled, the context is also referenced as the GPU enters and exists from RC6 (GPU has it's own internal power context, except on gen5). Though something like a context does exist for the media ring, the code only supports contexts for the render ring. In software, there is a distinction between contexts created by the user, and the default HW context. The default HW context is used by GPU clients that do not request setup of their own hardware context. The default context's state is never restored to help prevent programming errors. This would happen if a client ran and piggy-backed off another clients GPU state. The default context only exists to give the GPU some offset to load as the current to invoke a save of the context we actually care about. In fact, the code could likely be constructed, albeit in a more complicated fashion, to never use the default context, though that limits the driver's ability to swap out, and/or destroy other contexts. All other contexts are created as a request by the GPU client. These contexts store GPU state, and thus allow GPU clients to not re-emit state (and potentially query certain state) at any time. The kernel driver makes certain that the appropriate commands are inserted. There are 4 entry points into the contexts, init, fini, open, close. The names are self-explanatory except that init can be called during reset, and also during pm thaw/resume. As we expect our context to be preserved across these events, we do not reinitialize in this case. As Adam Jackson pointed out, The cutoff of 1MB where a HW context is considered too big is arbitrary. The reason for this is even though context sizes are increasing with every generation, they have yet to eclipse even 32k. If we somehow read back way more than that, it probably means BIOS has done something strange, or we're running on a platform that wasn't designed for this. v2: rename load/unload to init/fini (daniel) remove ILK support for get_size() (indirectly daniel) add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel) added comments (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-05 04:42:42 +07:00
* offset of the BO. The GPU is not actively referencing the data at this
* offset, but it will on the next context switch. The only way to avoid this
* is to do a GPU reset.
*
* An "active context' is one which was previously the "current context" and is
* on the active list waiting for the next context switch to occur. Until this
* happens, the object must remain at the same gtt offset. It is therefore
* possible to destroy a context, but it is still active.
*
*/
#include <linux/log2.h>
#include <drm/i915_drm.h>
drm/i915: preliminary context support Very basic code for context setup/destruction in the driver. Adds the file i915_gem_context.c This file implements HW context support. On gen5+ a HW context consists of an opaque GPU object which is referenced at times of context saves and restores. With RC6 enabled, the context is also referenced as the GPU enters and exists from RC6 (GPU has it's own internal power context, except on gen5). Though something like a context does exist for the media ring, the code only supports contexts for the render ring. In software, there is a distinction between contexts created by the user, and the default HW context. The default HW context is used by GPU clients that do not request setup of their own hardware context. The default context's state is never restored to help prevent programming errors. This would happen if a client ran and piggy-backed off another clients GPU state. The default context only exists to give the GPU some offset to load as the current to invoke a save of the context we actually care about. In fact, the code could likely be constructed, albeit in a more complicated fashion, to never use the default context, though that limits the driver's ability to swap out, and/or destroy other contexts. All other contexts are created as a request by the GPU client. These contexts store GPU state, and thus allow GPU clients to not re-emit state (and potentially query certain state) at any time. The kernel driver makes certain that the appropriate commands are inserted. There are 4 entry points into the contexts, init, fini, open, close. The names are self-explanatory except that init can be called during reset, and also during pm thaw/resume. As we expect our context to be preserved across these events, we do not reinitialize in this case. As Adam Jackson pointed out, The cutoff of 1MB where a HW context is considered too big is arbitrary. The reason for this is even though context sizes are increasing with every generation, they have yet to eclipse even 32k. If we somehow read back way more than that, it probably means BIOS has done something strange, or we're running on a platform that wasn't designed for this. v2: rename load/unload to init/fini (daniel) remove ILK support for get_size() (indirectly daniel) add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel) added comments (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-05 04:42:42 +07:00
#include "i915_drv.h"
#include "i915_trace.h"
drm/i915: Expose RPCS (SSEU) configuration to userspace (Gen11 only) We want to allow userspace to reconfigure the subslice configuration on a per context basis. This is required for the functional requirement of shutting down non-VME enabled sub-slices on Gen11 parts. To do so, we expose a context parameter to allow adjustment of the RPCS register stored within the context image (and currently not accessible via LRI). If the context is adjusted before first use or whilst idle, the adjustment is for "free"; otherwise if the context is active we queue a request to do so (using the kernel context), following all other activity by that context, which is also marked as barrier for all following submission against the same context. Since the overhead of device re-configuration during context switching can be significant, especially in multi-context workloads, we limit this new uAPI to only support the Gen11 VME use case. In this use case either the device is fully enabled, and exactly one slice and half of the subslices are enabled. Example usage: struct drm_i915_gem_context_param_sseu sseu = { }; struct drm_i915_gem_context_param arg = { .param = I915_CONTEXT_PARAM_SSEU, .ctx_id = gem_context_create(fd), .size = sizeof(sseu), .value = to_user_pointer(&sseu) }; /* Query device defaults. */ gem_context_get_param(fd, &arg); /* Set VME configuration on a 1x6x8 part. */ sseu.slice_mask = 0x1; sseu.subslice_mask = 0xe0; gem_context_set_param(fd, &arg); v2: Fix offset of CTX_R_PWR_CLK_STATE in intel_lr_context_set_sseu() (Lionel) v3: Add ability to program this per engine (Chris) v4: Move most get_sseu() into i915_gem_context.c (Lionel) v5: Validate sseu configuration against the device's capabilities (Lionel) v6: Change context powergating settings through MI_SDM on kernel context (Chris) v7: Synchronize the requests following a powergating setting change using a global dependency (Chris) Iterate timelines through dev_priv.gt.active_rings (Tvrtko) Disable RPCS configuration setting for non capable users (Lionel/Tvrtko) v8: s/union intel_sseu/struct intel_sseu/ (Lionel) s/dev_priv/i915/ (Tvrtko) Change uapi class/instance fields to u16 (Tvrtko) Bump mask fields to 64bits (Lionel) Don't return EPERM when dynamic sseu is disabled (Tvrtko) v9: Import context image into kernel context's ppgtt only when reconfiguring powergated slice/subslices (Chris) Use aliasing ppgtt when needed (Michel) Tvrtko Ursulin: v10: * Update for upstream changes. * Request submit needs a RPM reference. * Reject on !FULL_PPGTT for simplicity. * Pull out get/set param to helpers for readability and less indent. * Use i915_request_await_dma_fence in add_global_barrier to skip waits on the same timeline and avoid GEM_BUG_ON. * No need to explicitly assign a NULL pointer to engine in legacy mode. * No need to move gen8_make_rpcs up. * Factored out global barrier as prep patch. * Allow to only CAP_SYS_ADMIN if !Gen11. v11: * Remove engine vfunc in favour of local helper. (Chris Wilson) * Stop retiring requests before updates since it is not needed (Chris Wilson) * Implement direct CPU update path for idle contexts. (Chris Wilson) * Left side dependency needs only be on the same context timeline. (Chris Wilson) * It is sufficient to order the timeline. (Chris Wilson) * Reject !RCS configuration attempts with -ENODEV for now. v12: * Rebase for make_rpcs. v13: * Centralize SSEU normalization to make_rpcs. * Type width checking (uAPI <-> implementation). * Gen11 restrictions uAPI checks. * Gen11 subslice count differences handling. Chris Wilson: * args->size handling fixes. * Update context image from GGTT. * Postpone context image update to pinning. * Use i915_gem_active_raw instead of last_request_on_engine. v14: * Add activity tracker on intel_context to fix the lifetime issues and simplify the code. (Chris Wilson) v15: * Fix context pin leak if no space in ring by simplifying the context pinning sequence. v16: * Rebase for context get/set param locking changes. * Just -ENODEV on !Gen11. (Joonas) v17: * Fix one Gen11 subslice enablement rule. * Handle error from i915_sw_fence_await_sw_fence_gfp. (Chris Wilson) v18: * Update commit message. (Joonas) * Restrict uAPI to VME use case. (Joonas) v19: * Rebase. v20: * Rebase for ce->active_tracker. v21: * Rebase for IS_GEN changes. v22: * Reserve uAPI for flags straight away. (Chris Wilson) v23: * Rebase for RUNTIME_INFO. v24: * Added some headline docs for the uapi usage. (Joonas/Chris) v25: * Renamed class/instance to engine_class/engine_instance to avoid clash with C++ keyword. (Tony Ye) v26: * Rebased for runtime pm api changes. v27: * Rebased for intel_context_init. * Wrap commit msg to 75. v28: (Chris Wilson) * Use i915_gem_ggtt. * Use i915_request_await_dma_fence to show a better example. v29: * i915_timeline_set_barrier can now fail. (Chris Wilson) v30: * Capture some acks. v31: * Drop the WARN_ON from use controllable paths. (Chris Wilson) * Use overflows_type for all checks. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100899 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107634 Issue: https://github.com/intel/media-driver/issues/267 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Zhipeng Gong <zhipeng.gong@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tony Ye <tony.ye@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Timo Aaltonen <timo.aaltonen@canonical.com> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Stéphane Marchesin <marcheu@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-4-tvrtko.ursulin@linux.intel.com
2019-02-05 16:50:31 +07:00
#include "intel_lrc_reg.h"
#include "intel_workarounds.h"
drm/i915: preliminary context support Very basic code for context setup/destruction in the driver. Adds the file i915_gem_context.c This file implements HW context support. On gen5+ a HW context consists of an opaque GPU object which is referenced at times of context saves and restores. With RC6 enabled, the context is also referenced as the GPU enters and exists from RC6 (GPU has it's own internal power context, except on gen5). Though something like a context does exist for the media ring, the code only supports contexts for the render ring. In software, there is a distinction between contexts created by the user, and the default HW context. The default HW context is used by GPU clients that do not request setup of their own hardware context. The default context's state is never restored to help prevent programming errors. This would happen if a client ran and piggy-backed off another clients GPU state. The default context only exists to give the GPU some offset to load as the current to invoke a save of the context we actually care about. In fact, the code could likely be constructed, albeit in a more complicated fashion, to never use the default context, though that limits the driver's ability to swap out, and/or destroy other contexts. All other contexts are created as a request by the GPU client. These contexts store GPU state, and thus allow GPU clients to not re-emit state (and potentially query certain state) at any time. The kernel driver makes certain that the appropriate commands are inserted. There are 4 entry points into the contexts, init, fini, open, close. The names are self-explanatory except that init can be called during reset, and also during pm thaw/resume. As we expect our context to be preserved across these events, we do not reinitialize in this case. As Adam Jackson pointed out, The cutoff of 1MB where a HW context is considered too big is arbitrary. The reason for this is even though context sizes are increasing with every generation, they have yet to eclipse even 32k. If we somehow read back way more than that, it probably means BIOS has done something strange, or we're running on a platform that wasn't designed for this. v2: rename load/unload to init/fini (daniel) remove ILK support for get_size() (indirectly daniel) add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel) added comments (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-05 04:42:42 +07:00
#define ALL_L3_SLICES(dev) (1 << NUM_L3_SLICES(dev)) - 1
static void lut_close(struct i915_gem_context *ctx)
{
struct i915_lut_handle *lut, *ln;
struct radix_tree_iter iter;
void __rcu **slot;
list_for_each_entry_safe(lut, ln, &ctx->handles_list, ctx_link) {
list_del(&lut->obj_link);
kmem_cache_free(ctx->i915->luts, lut);
}
drm/i915: Hold rcu_read_lock when iterating over the radixtree (vma idr) Kasan spotted [IGT] gem_tiled_pread_pwrite: exiting, ret=0 ================================================================== BUG: KASAN: use-after-free in __i915_gem_object_reset_page_iter+0x15c/0x170 [i915] Read of size 8 at addr ffff8801359da310 by task kworker/3:2/182 CPU: 3 PID: 182 Comm: kworker/3:2 Tainted: G U 4.14.0-rc6-CI-Custom_3340+ #1 Hardware name: Intel Corp. Geminilake/GLK RVP1 DDR4 (05), BIOS GELKRVPA.X64.0062.B30.1708222146 08/22/2017 Workqueue: events __i915_gem_free_work [i915] Call Trace: dump_stack+0x68/0xa0 print_address_description+0x78/0x290 ? __i915_gem_object_reset_page_iter+0x15c/0x170 [i915] kasan_report+0x23d/0x350 __asan_report_load8_noabort+0x19/0x20 __i915_gem_object_reset_page_iter+0x15c/0x170 [i915] ? i915_gem_object_truncate+0x100/0x100 [i915] ? lock_acquire+0x380/0x380 __i915_gem_object_put_pages+0x30d/0x530 [i915] __i915_gem_free_objects+0x551/0xbd0 [i915] ? lock_acquire+0x13e/0x380 __i915_gem_free_work+0x4e/0x70 [i915] process_one_work+0x6f6/0x1590 ? pwq_dec_nr_in_flight+0x2b0/0x2b0 worker_thread+0xe6/0xe90 ? pci_mmcfg_check_reserved+0x110/0x110 kthread+0x309/0x410 ? process_one_work+0x1590/0x1590 ? kthread_create_on_node+0xb0/0xb0 ret_from_fork+0x27/0x40 Allocated by task 1801: save_stack_trace+0x1b/0x20 kasan_kmalloc+0xee/0x190 kasan_slab_alloc+0x12/0x20 kmem_cache_alloc+0xdc/0x2e0 radix_tree_node_alloc.constprop.12+0x48/0x330 __radix_tree_create+0x274/0x480 __radix_tree_insert+0xa2/0x610 i915_gem_object_get_sg+0x224/0x670 [i915] i915_gem_object_get_page+0xb5/0x1c0 [i915] i915_gem_pread_ioctl+0x822/0xf60 [i915] drm_ioctl_kernel+0x13f/0x1c0 drm_ioctl+0x6cf/0x980 do_vfs_ioctl+0x184/0xf30 SyS_ioctl+0x41/0x70 entry_SYSCALL_64_fastpath+0x1c/0xb1 Freed by task 37: save_stack_trace+0x1b/0x20 kasan_slab_free+0xaf/0x190 kmem_cache_free+0xbf/0x340 radix_tree_node_rcu_free+0x79/0x90 rcu_process_callbacks+0x46d/0xf40 __do_softirq+0x21c/0x8d3 The buggy address belongs to the object at ffff8801359da0f0 which belongs to the cache radix_tree_node of size 576 The buggy address is located 544 bytes inside of 576-byte region [ffff8801359da0f0, ffff8801359da330) The buggy address belongs to the page: page:ffffea0004d67600 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x8000000000008100(slab|head) raw: 8000000000008100 0000000000000000 0000000000000000 0000000100110011 raw: ffffea0004b52920 ffffea0004b38020 ffff88015b416a80 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801359da200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801359da280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8801359da300: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc ^ ffff8801359da380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8801359da400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Disabling lock debugging due to kernel taint which looks like the slab containing the radixtree iter was freed as we traversed the tree, taking the rcu read lock across the loop should prevent that (deferring all the frees until the end). Reported-by: Tomi Sarvela <tomi.p.sarvela@intel.com> Fixes: d1b48c1e7184 ("drm/i915: Replace execbuf vma ht with an idr") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171026130032.10677-2-chris@chris-wilson.co.uk Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
2017-10-26 20:00:32 +07:00
rcu_read_lock();
radix_tree_for_each_slot(slot, &ctx->handles_vma, &iter, 0) {
struct i915_vma *vma = rcu_dereference_raw(*slot);
radix_tree_iter_delete(&ctx->handles_vma, &iter, slot);
__i915_gem_object_release_unless_active(vma->obj);
}
drm/i915: Hold rcu_read_lock when iterating over the radixtree (vma idr) Kasan spotted [IGT] gem_tiled_pread_pwrite: exiting, ret=0 ================================================================== BUG: KASAN: use-after-free in __i915_gem_object_reset_page_iter+0x15c/0x170 [i915] Read of size 8 at addr ffff8801359da310 by task kworker/3:2/182 CPU: 3 PID: 182 Comm: kworker/3:2 Tainted: G U 4.14.0-rc6-CI-Custom_3340+ #1 Hardware name: Intel Corp. Geminilake/GLK RVP1 DDR4 (05), BIOS GELKRVPA.X64.0062.B30.1708222146 08/22/2017 Workqueue: events __i915_gem_free_work [i915] Call Trace: dump_stack+0x68/0xa0 print_address_description+0x78/0x290 ? __i915_gem_object_reset_page_iter+0x15c/0x170 [i915] kasan_report+0x23d/0x350 __asan_report_load8_noabort+0x19/0x20 __i915_gem_object_reset_page_iter+0x15c/0x170 [i915] ? i915_gem_object_truncate+0x100/0x100 [i915] ? lock_acquire+0x380/0x380 __i915_gem_object_put_pages+0x30d/0x530 [i915] __i915_gem_free_objects+0x551/0xbd0 [i915] ? lock_acquire+0x13e/0x380 __i915_gem_free_work+0x4e/0x70 [i915] process_one_work+0x6f6/0x1590 ? pwq_dec_nr_in_flight+0x2b0/0x2b0 worker_thread+0xe6/0xe90 ? pci_mmcfg_check_reserved+0x110/0x110 kthread+0x309/0x410 ? process_one_work+0x1590/0x1590 ? kthread_create_on_node+0xb0/0xb0 ret_from_fork+0x27/0x40 Allocated by task 1801: save_stack_trace+0x1b/0x20 kasan_kmalloc+0xee/0x190 kasan_slab_alloc+0x12/0x20 kmem_cache_alloc+0xdc/0x2e0 radix_tree_node_alloc.constprop.12+0x48/0x330 __radix_tree_create+0x274/0x480 __radix_tree_insert+0xa2/0x610 i915_gem_object_get_sg+0x224/0x670 [i915] i915_gem_object_get_page+0xb5/0x1c0 [i915] i915_gem_pread_ioctl+0x822/0xf60 [i915] drm_ioctl_kernel+0x13f/0x1c0 drm_ioctl+0x6cf/0x980 do_vfs_ioctl+0x184/0xf30 SyS_ioctl+0x41/0x70 entry_SYSCALL_64_fastpath+0x1c/0xb1 Freed by task 37: save_stack_trace+0x1b/0x20 kasan_slab_free+0xaf/0x190 kmem_cache_free+0xbf/0x340 radix_tree_node_rcu_free+0x79/0x90 rcu_process_callbacks+0x46d/0xf40 __do_softirq+0x21c/0x8d3 The buggy address belongs to the object at ffff8801359da0f0 which belongs to the cache radix_tree_node of size 576 The buggy address is located 544 bytes inside of 576-byte region [ffff8801359da0f0, ffff8801359da330) The buggy address belongs to the page: page:ffffea0004d67600 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x8000000000008100(slab|head) raw: 8000000000008100 0000000000000000 0000000000000000 0000000100110011 raw: ffffea0004b52920 ffffea0004b38020 ffff88015b416a80 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801359da200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801359da280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8801359da300: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc ^ ffff8801359da380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8801359da400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Disabling lock debugging due to kernel taint which looks like the slab containing the radixtree iter was freed as we traversed the tree, taking the rcu read lock across the loop should prevent that (deferring all the frees until the end). Reported-by: Tomi Sarvela <tomi.p.sarvela@intel.com> Fixes: d1b48c1e7184 ("drm/i915: Replace execbuf vma ht with an idr") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171026130032.10677-2-chris@chris-wilson.co.uk Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
2017-10-26 20:00:32 +07:00
rcu_read_unlock();
}
drm/i915: Reduce context HW ID lifetime Future gen reduce the number of bits we will have available to differentiate between contexts, so reduce the lifetime of the ID assignment from that of the context to its current active cycle (i.e. only while it is pinned for use by the HW, will it have a constant ID). This means that instead of a max of 2k allocated contexts (worst case before fun with bit twiddling), we instead have a limit of 2k in flight contexts (minus a few that have been pinned by the kernel or by perf). To reduce the number of contexts id we require, we allocate a context id on first and mark it as pinned for as long as the GEM context itself is, that is we keep it pinned it while active on each engine. If we exhaust our context id space, then we try to reclaim an id from an idle context. In the extreme case where all context ids are pinned by active contexts, we force the system to idle in order to recover ids. We cannot reduce the scope of an HW-ID to an engine (allowing the same gem_context to have different ids on each engine) as in the future we will need to preassign an id before we know which engine the context is being executed on. v2: Improved commentary (Tvrtko) [I tried at least] References: https://bugs.freedesktop.org/show_bug.cgi?id=107788 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180904153117.3907-1-chris@chris-wilson.co.uk
2018-09-04 22:31:17 +07:00
static inline int new_hw_id(struct drm_i915_private *i915, gfp_t gfp)
{
unsigned int max;
lockdep_assert_held(&i915->contexts.mutex);
if (INTEL_GEN(i915) >= 11)
max = GEN11_MAX_CONTEXT_HW_ID;
else if (USES_GUC_SUBMISSION(i915))
/*
* When using GuC in proxy submission, GuC consumes the
* highest bit in the context id to indicate proxy submission.
*/
max = MAX_GUC_CONTEXT_HW_ID;
else
max = MAX_CONTEXT_HW_ID;
return ida_simple_get(&i915->contexts.hw_ida, 0, max, gfp);
}
static int steal_hw_id(struct drm_i915_private *i915)
{
struct i915_gem_context *ctx, *cn;
LIST_HEAD(pinned);
int id = -ENOSPC;
lockdep_assert_held(&i915->contexts.mutex);
list_for_each_entry_safe(ctx, cn,
&i915->contexts.hw_id_list, hw_id_link) {
if (atomic_read(&ctx->hw_id_pin_count)) {
list_move_tail(&ctx->hw_id_link, &pinned);
continue;
}
GEM_BUG_ON(!ctx->hw_id); /* perma-pinned kernel context */
list_del_init(&ctx->hw_id_link);
id = ctx->hw_id;
break;
}
/*
* Remember how far we got up on the last repossesion scan, so the
* list is kept in a "least recently scanned" order.
*/
list_splice_tail(&pinned, &i915->contexts.hw_id_list);
return id;
}
static int assign_hw_id(struct drm_i915_private *i915, unsigned int *out)
{
int ret;
lockdep_assert_held(&i915->contexts.mutex);
/*
* We prefer to steal/stall ourselves and our users over that of the
* entire system. That may be a little unfair to our users, and
* even hurt high priority clients. The choice is whether to oomkill
* something else, or steal a context id.
*/
ret = new_hw_id(i915, GFP_KERNEL | __GFP_RETRY_MAYFAIL | __GFP_NOWARN);
if (unlikely(ret < 0)) {
ret = steal_hw_id(i915);
if (ret < 0) /* once again for the correct errno code */
ret = new_hw_id(i915, GFP_KERNEL);
if (ret < 0)
return ret;
}
*out = ret;
return 0;
}
static void release_hw_id(struct i915_gem_context *ctx)
{
struct drm_i915_private *i915 = ctx->i915;
if (list_empty(&ctx->hw_id_link))
return;
mutex_lock(&i915->contexts.mutex);
if (!list_empty(&ctx->hw_id_link)) {
ida_simple_remove(&i915->contexts.hw_ida, ctx->hw_id);
list_del_init(&ctx->hw_id_link);
}
mutex_unlock(&i915->contexts.mutex);
}
static void i915_gem_context_free(struct i915_gem_context *ctx)
{
unsigned int n;
lockdep_assert_held(&ctx->i915->drm.struct_mutex);
GEM_BUG_ON(!i915_gem_context_is_closed(ctx));
drm/i915: Reduce context HW ID lifetime Future gen reduce the number of bits we will have available to differentiate between contexts, so reduce the lifetime of the ID assignment from that of the context to its current active cycle (i.e. only while it is pinned for use by the HW, will it have a constant ID). This means that instead of a max of 2k allocated contexts (worst case before fun with bit twiddling), we instead have a limit of 2k in flight contexts (minus a few that have been pinned by the kernel or by perf). To reduce the number of contexts id we require, we allocate a context id on first and mark it as pinned for as long as the GEM context itself is, that is we keep it pinned it while active on each engine. If we exhaust our context id space, then we try to reclaim an id from an idle context. In the extreme case where all context ids are pinned by active contexts, we force the system to idle in order to recover ids. We cannot reduce the scope of an HW-ID to an engine (allowing the same gem_context to have different ids on each engine) as in the future we will need to preassign an id before we know which engine the context is being executed on. v2: Improved commentary (Tvrtko) [I tried at least] References: https://bugs.freedesktop.org/show_bug.cgi?id=107788 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180904153117.3907-1-chris@chris-wilson.co.uk
2018-09-04 22:31:17 +07:00
release_hw_id(ctx);
i915_ppgtt_put(ctx->ppgtt);
for (n = 0; n < ARRAY_SIZE(ctx->__engine); n++) {
struct intel_context *ce = &ctx->__engine[n];
if (ce->ops)
ce->ops->destroy(ce);
}
kfree(ctx->name);
put_pid(ctx->pid);
list_del(&ctx->link);
kfree_rcu(ctx, rcu);
}
static void contexts_free(struct drm_i915_private *i915)
{
struct llist_node *freed = llist_del_all(&i915->contexts.free_list);
struct i915_gem_context *ctx, *cn;
lockdep_assert_held(&i915->drm.struct_mutex);
llist_for_each_entry_safe(ctx, cn, freed, free_link)
i915_gem_context_free(ctx);
}
static void contexts_free_first(struct drm_i915_private *i915)
{
struct i915_gem_context *ctx;
struct llist_node *freed;
lockdep_assert_held(&i915->drm.struct_mutex);
freed = llist_del_first(&i915->contexts.free_list);
if (!freed)
return;
ctx = container_of(freed, typeof(*ctx), free_link);
i915_gem_context_free(ctx);
}
static void contexts_free_worker(struct work_struct *work)
{
struct drm_i915_private *i915 =
container_of(work, typeof(*i915), contexts.free_work);
mutex_lock(&i915->drm.struct_mutex);
contexts_free(i915);
mutex_unlock(&i915->drm.struct_mutex);
}
void i915_gem_context_release(struct kref *ref)
{
struct i915_gem_context *ctx = container_of(ref, typeof(*ctx), ref);
struct drm_i915_private *i915 = ctx->i915;
trace_i915_context_free(ctx);
if (llist_add(&ctx->free_link, &i915->contexts.free_list))
queue_work(i915->wq, &i915->contexts.free_work);
}
static void context_close(struct i915_gem_context *ctx)
{
i915_gem_context_set_closed(ctx);
drm/i915: Reduce context HW ID lifetime Future gen reduce the number of bits we will have available to differentiate between contexts, so reduce the lifetime of the ID assignment from that of the context to its current active cycle (i.e. only while it is pinned for use by the HW, will it have a constant ID). This means that instead of a max of 2k allocated contexts (worst case before fun with bit twiddling), we instead have a limit of 2k in flight contexts (minus a few that have been pinned by the kernel or by perf). To reduce the number of contexts id we require, we allocate a context id on first and mark it as pinned for as long as the GEM context itself is, that is we keep it pinned it while active on each engine. If we exhaust our context id space, then we try to reclaim an id from an idle context. In the extreme case where all context ids are pinned by active contexts, we force the system to idle in order to recover ids. We cannot reduce the scope of an HW-ID to an engine (allowing the same gem_context to have different ids on each engine) as in the future we will need to preassign an id before we know which engine the context is being executed on. v2: Improved commentary (Tvrtko) [I tried at least] References: https://bugs.freedesktop.org/show_bug.cgi?id=107788 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180904153117.3907-1-chris@chris-wilson.co.uk
2018-09-04 22:31:17 +07:00
/*
* This context will never again be assinged to HW, so we can
* reuse its ID for the next context.
*/
release_hw_id(ctx);
/*
* The LUT uses the VMA as a backpointer to unref the object,
* so we need to clear the LUT before we close all the VMA (inside
* the ppgtt).
*/
lut_close(ctx);
if (ctx->ppgtt)
i915_ppgtt_close(&ctx->ppgtt->vm);
ctx->file_priv = ERR_PTR(-EBADF);
i915_gem_context_put(ctx);
}
static u32 default_desc_template(const struct drm_i915_private *i915,
const struct i915_hw_ppgtt *ppgtt)
{
u32 address_mode;
u32 desc;
desc = GEN8_CTX_VALID | GEN8_CTX_PRIVILEGE;
address_mode = INTEL_LEGACY_32B_CONTEXT;
if (ppgtt && i915_vm_is_48bit(&ppgtt->vm))
address_mode = INTEL_LEGACY_64B_CONTEXT;
desc |= address_mode << GEN8_CTX_ADDRESSING_MODE_SHIFT;
if (IS_GEN(i915, 8))
desc |= GEN8_CTX_L3LLC_COHERENT;
/* TODO: WaDisableLiteRestore when we start using semaphore
* signalling between Command Streamers
* ring->ctx_desc_template |= GEN8_CTX_FORCE_RESTORE;
*/
return desc;
}
static void intel_context_retire(struct i915_active_request *active,
drm/i915: Expose RPCS (SSEU) configuration to userspace (Gen11 only) We want to allow userspace to reconfigure the subslice configuration on a per context basis. This is required for the functional requirement of shutting down non-VME enabled sub-slices on Gen11 parts. To do so, we expose a context parameter to allow adjustment of the RPCS register stored within the context image (and currently not accessible via LRI). If the context is adjusted before first use or whilst idle, the adjustment is for "free"; otherwise if the context is active we queue a request to do so (using the kernel context), following all other activity by that context, which is also marked as barrier for all following submission against the same context. Since the overhead of device re-configuration during context switching can be significant, especially in multi-context workloads, we limit this new uAPI to only support the Gen11 VME use case. In this use case either the device is fully enabled, and exactly one slice and half of the subslices are enabled. Example usage: struct drm_i915_gem_context_param_sseu sseu = { }; struct drm_i915_gem_context_param arg = { .param = I915_CONTEXT_PARAM_SSEU, .ctx_id = gem_context_create(fd), .size = sizeof(sseu), .value = to_user_pointer(&sseu) }; /* Query device defaults. */ gem_context_get_param(fd, &arg); /* Set VME configuration on a 1x6x8 part. */ sseu.slice_mask = 0x1; sseu.subslice_mask = 0xe0; gem_context_set_param(fd, &arg); v2: Fix offset of CTX_R_PWR_CLK_STATE in intel_lr_context_set_sseu() (Lionel) v3: Add ability to program this per engine (Chris) v4: Move most get_sseu() into i915_gem_context.c (Lionel) v5: Validate sseu configuration against the device's capabilities (Lionel) v6: Change context powergating settings through MI_SDM on kernel context (Chris) v7: Synchronize the requests following a powergating setting change using a global dependency (Chris) Iterate timelines through dev_priv.gt.active_rings (Tvrtko) Disable RPCS configuration setting for non capable users (Lionel/Tvrtko) v8: s/union intel_sseu/struct intel_sseu/ (Lionel) s/dev_priv/i915/ (Tvrtko) Change uapi class/instance fields to u16 (Tvrtko) Bump mask fields to 64bits (Lionel) Don't return EPERM when dynamic sseu is disabled (Tvrtko) v9: Import context image into kernel context's ppgtt only when reconfiguring powergated slice/subslices (Chris) Use aliasing ppgtt when needed (Michel) Tvrtko Ursulin: v10: * Update for upstream changes. * Request submit needs a RPM reference. * Reject on !FULL_PPGTT for simplicity. * Pull out get/set param to helpers for readability and less indent. * Use i915_request_await_dma_fence in add_global_barrier to skip waits on the same timeline and avoid GEM_BUG_ON. * No need to explicitly assign a NULL pointer to engine in legacy mode. * No need to move gen8_make_rpcs up. * Factored out global barrier as prep patch. * Allow to only CAP_SYS_ADMIN if !Gen11. v11: * Remove engine vfunc in favour of local helper. (Chris Wilson) * Stop retiring requests before updates since it is not needed (Chris Wilson) * Implement direct CPU update path for idle contexts. (Chris Wilson) * Left side dependency needs only be on the same context timeline. (Chris Wilson) * It is sufficient to order the timeline. (Chris Wilson) * Reject !RCS configuration attempts with -ENODEV for now. v12: * Rebase for make_rpcs. v13: * Centralize SSEU normalization to make_rpcs. * Type width checking (uAPI <-> implementation). * Gen11 restrictions uAPI checks. * Gen11 subslice count differences handling. Chris Wilson: * args->size handling fixes. * Update context image from GGTT. * Postpone context image update to pinning. * Use i915_gem_active_raw instead of last_request_on_engine. v14: * Add activity tracker on intel_context to fix the lifetime issues and simplify the code. (Chris Wilson) v15: * Fix context pin leak if no space in ring by simplifying the context pinning sequence. v16: * Rebase for context get/set param locking changes. * Just -ENODEV on !Gen11. (Joonas) v17: * Fix one Gen11 subslice enablement rule. * Handle error from i915_sw_fence_await_sw_fence_gfp. (Chris Wilson) v18: * Update commit message. (Joonas) * Restrict uAPI to VME use case. (Joonas) v19: * Rebase. v20: * Rebase for ce->active_tracker. v21: * Rebase for IS_GEN changes. v22: * Reserve uAPI for flags straight away. (Chris Wilson) v23: * Rebase for RUNTIME_INFO. v24: * Added some headline docs for the uapi usage. (Joonas/Chris) v25: * Renamed class/instance to engine_class/engine_instance to avoid clash with C++ keyword. (Tony Ye) v26: * Rebased for runtime pm api changes. v27: * Rebased for intel_context_init. * Wrap commit msg to 75. v28: (Chris Wilson) * Use i915_gem_ggtt. * Use i915_request_await_dma_fence to show a better example. v29: * i915_timeline_set_barrier can now fail. (Chris Wilson) v30: * Capture some acks. v31: * Drop the WARN_ON from use controllable paths. (Chris Wilson) * Use overflows_type for all checks. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100899 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107634 Issue: https://github.com/intel/media-driver/issues/267 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Zhipeng Gong <zhipeng.gong@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tony Ye <tony.ye@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Timo Aaltonen <timo.aaltonen@canonical.com> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Stéphane Marchesin <marcheu@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-4-tvrtko.ursulin@linux.intel.com
2019-02-05 16:50:31 +07:00
struct i915_request *rq)
{
struct intel_context *ce =
container_of(active, typeof(*ce), active_tracker);
intel_context_unpin(ce);
}
void
intel_context_init(struct intel_context *ce,
struct i915_gem_context *ctx,
struct intel_engine_cs *engine)
{
ce->gem_context = ctx;
drm/i915: Replace global breadcrumbs with per-context interrupt tracking A few years ago, see commit 688e6c725816 ("drm/i915: Slaughter the thundering i915_wait_request herd"), the issue of handling multiple clients waiting in parallel was brought to our attention. The requirement was that every client should be woken immediately upon its request being signaled, without incurring any cpu overhead. To handle certain fragility of our hw meant that we could not do a simple check inside the irq handler (some generations required almost unbounded delays before we could be sure of seqno coherency) and so request completion checking required delegation. Before commit 688e6c725816, the solution was simple. Every client waiting on a request would be woken on every interrupt and each would do a heavyweight check to see if their request was complete. Commit 688e6c725816 introduced an rbtree so that only the earliest waiter on the global timeline would woken, and would wake the next and so on. (Along with various complications to handle requests being reordered along the global timeline, and also a requirement for kthread to provide a delegate for fence signaling that had no process context.) The global rbtree depends on knowing the execution timeline (and global seqno). Without knowing that order, we must instead check all contexts queued to the HW to see which may have advanced. We trim that list by only checking queued contexts that are being waited on, but still we keep a list of all active contexts and their active signalers that we inspect from inside the irq handler. By moving the waiters onto the fence signal list, we can combine the client wakeup with the dma_fence signaling (a dramatic reduction in complexity, but does require the HW being coherent, the seqno must be visible from the cpu before the interrupt is raised - we keep a timer backup just in case). Having previously fixed all the issues with irq-seqno serialisation (by inserting delays onto the GPU after each request instead of random delays on the CPU after each interrupt), we can rely on the seqno state to perfom direct wakeups from the interrupt handler. This allows us to preserve our single context switch behaviour of the current routine, with the only downside that we lose the RT priority sorting of wakeups. In general, direct wakeup latency of multiple clients is about the same (about 10% better in most cases) with a reduction in total CPU time spent in the waiter (about 20-50% depending on gen). Average herd behaviour is improved, but at the cost of not delegating wakeups on task_prio. v2: Capture fence signaling state for error state and add comments to warm even the most cold of hearts. v3: Check if the request is still active before busywaiting v4: Reduce the amount of pointer misdirection with list_for_each_safe and using a local i915_request variable inside the loops v5: Add a missing pluralisation to a purely informative selftest message. References: 688e6c725816 ("drm/i915: Slaughter the thundering i915_wait_request herd") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190129205230.19056-2-chris@chris-wilson.co.uk
2019-01-30 03:52:29 +07:00
INIT_LIST_HEAD(&ce->signal_link);
INIT_LIST_HEAD(&ce->signals);
drm/i915: Record the sseu configuration per-context & engine We want to expose the ability to reconfigure the slices, subslice and eu per context and per engine. To facilitate that, store the current configuration on the context for each engine, which is initially set to the device default upon creation. v2: record sseu configuration per context & engine (Chris) v3: introduce the i915_gem_context_sseu to store powergating programming, sseu_dev_info has grown quite a bit (Lionel) v4: rename i915_gem_sseu into intel_sseu (Chris) use to_intel_context() (Chris) v5: More to_intel_context() (Tvrtko) Switch intel_sseu from union to struct (Tvrtko) Move context default sseu in existing loop (Chris) v6: s/intel_sseu_from_device_sseu/intel_device_default_sseu/ (Tvrtko) Tvrtko Ursulin: v7: * Pass intel_sseu by pointer instead of value to make_rpcs. * Rebase for make_rpcs changes. v8: * Rebase for RPCS edit on pin. v9: * Rebase for context image setup changes. v10: * Rename dev_priv to i915. (Chris Wilson) v11: * Rebase. v12: * Rebase for IS_GEN changes. v13: * Rebase for RUNTIME_INFO. v14: * Rebase for intel_context_init. v15: * Rebase for drm-tip changes. v16: * Moved struct intel_sseu definition to i915_gem_context.h. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-1-tvrtko.ursulin@linux.intel.com
2019-02-05 16:50:28 +07:00
/* Use the whole device by default */
ce->sseu = intel_device_default_sseu(ctx->i915);
drm/i915: Expose RPCS (SSEU) configuration to userspace (Gen11 only) We want to allow userspace to reconfigure the subslice configuration on a per context basis. This is required for the functional requirement of shutting down non-VME enabled sub-slices on Gen11 parts. To do so, we expose a context parameter to allow adjustment of the RPCS register stored within the context image (and currently not accessible via LRI). If the context is adjusted before first use or whilst idle, the adjustment is for "free"; otherwise if the context is active we queue a request to do so (using the kernel context), following all other activity by that context, which is also marked as barrier for all following submission against the same context. Since the overhead of device re-configuration during context switching can be significant, especially in multi-context workloads, we limit this new uAPI to only support the Gen11 VME use case. In this use case either the device is fully enabled, and exactly one slice and half of the subslices are enabled. Example usage: struct drm_i915_gem_context_param_sseu sseu = { }; struct drm_i915_gem_context_param arg = { .param = I915_CONTEXT_PARAM_SSEU, .ctx_id = gem_context_create(fd), .size = sizeof(sseu), .value = to_user_pointer(&sseu) }; /* Query device defaults. */ gem_context_get_param(fd, &arg); /* Set VME configuration on a 1x6x8 part. */ sseu.slice_mask = 0x1; sseu.subslice_mask = 0xe0; gem_context_set_param(fd, &arg); v2: Fix offset of CTX_R_PWR_CLK_STATE in intel_lr_context_set_sseu() (Lionel) v3: Add ability to program this per engine (Chris) v4: Move most get_sseu() into i915_gem_context.c (Lionel) v5: Validate sseu configuration against the device's capabilities (Lionel) v6: Change context powergating settings through MI_SDM on kernel context (Chris) v7: Synchronize the requests following a powergating setting change using a global dependency (Chris) Iterate timelines through dev_priv.gt.active_rings (Tvrtko) Disable RPCS configuration setting for non capable users (Lionel/Tvrtko) v8: s/union intel_sseu/struct intel_sseu/ (Lionel) s/dev_priv/i915/ (Tvrtko) Change uapi class/instance fields to u16 (Tvrtko) Bump mask fields to 64bits (Lionel) Don't return EPERM when dynamic sseu is disabled (Tvrtko) v9: Import context image into kernel context's ppgtt only when reconfiguring powergated slice/subslices (Chris) Use aliasing ppgtt when needed (Michel) Tvrtko Ursulin: v10: * Update for upstream changes. * Request submit needs a RPM reference. * Reject on !FULL_PPGTT for simplicity. * Pull out get/set param to helpers for readability and less indent. * Use i915_request_await_dma_fence in add_global_barrier to skip waits on the same timeline and avoid GEM_BUG_ON. * No need to explicitly assign a NULL pointer to engine in legacy mode. * No need to move gen8_make_rpcs up. * Factored out global barrier as prep patch. * Allow to only CAP_SYS_ADMIN if !Gen11. v11: * Remove engine vfunc in favour of local helper. (Chris Wilson) * Stop retiring requests before updates since it is not needed (Chris Wilson) * Implement direct CPU update path for idle contexts. (Chris Wilson) * Left side dependency needs only be on the same context timeline. (Chris Wilson) * It is sufficient to order the timeline. (Chris Wilson) * Reject !RCS configuration attempts with -ENODEV for now. v12: * Rebase for make_rpcs. v13: * Centralize SSEU normalization to make_rpcs. * Type width checking (uAPI <-> implementation). * Gen11 restrictions uAPI checks. * Gen11 subslice count differences handling. Chris Wilson: * args->size handling fixes. * Update context image from GGTT. * Postpone context image update to pinning. * Use i915_gem_active_raw instead of last_request_on_engine. v14: * Add activity tracker on intel_context to fix the lifetime issues and simplify the code. (Chris Wilson) v15: * Fix context pin leak if no space in ring by simplifying the context pinning sequence. v16: * Rebase for context get/set param locking changes. * Just -ENODEV on !Gen11. (Joonas) v17: * Fix one Gen11 subslice enablement rule. * Handle error from i915_sw_fence_await_sw_fence_gfp. (Chris Wilson) v18: * Update commit message. (Joonas) * Restrict uAPI to VME use case. (Joonas) v19: * Rebase. v20: * Rebase for ce->active_tracker. v21: * Rebase for IS_GEN changes. v22: * Reserve uAPI for flags straight away. (Chris Wilson) v23: * Rebase for RUNTIME_INFO. v24: * Added some headline docs for the uapi usage. (Joonas/Chris) v25: * Renamed class/instance to engine_class/engine_instance to avoid clash with C++ keyword. (Tony Ye) v26: * Rebased for runtime pm api changes. v27: * Rebased for intel_context_init. * Wrap commit msg to 75. v28: (Chris Wilson) * Use i915_gem_ggtt. * Use i915_request_await_dma_fence to show a better example. v29: * i915_timeline_set_barrier can now fail. (Chris Wilson) v30: * Capture some acks. v31: * Drop the WARN_ON from use controllable paths. (Chris Wilson) * Use overflows_type for all checks. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100899 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107634 Issue: https://github.com/intel/media-driver/issues/267 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Zhipeng Gong <zhipeng.gong@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tony Ye <tony.ye@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Timo Aaltonen <timo.aaltonen@canonical.com> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Stéphane Marchesin <marcheu@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-4-tvrtko.ursulin@linux.intel.com
2019-02-05 16:50:31 +07:00
i915_active_request_init(&ce->active_tracker,
NULL, intel_context_retire);
}
static struct i915_gem_context *
__create_hw_context(struct drm_i915_private *dev_priv,
struct drm_i915_file_private *file_priv)
{
struct i915_gem_context *ctx;
unsigned int n;
int ret;
ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
if (ctx == NULL)
return ERR_PTR(-ENOMEM);
kref_init(&ctx->ref);
list_add_tail(&ctx->link, &dev_priv->contexts.list);
drm/i915: Store device pointer in contexts for late tracepoint usafe [ 1572.417121] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1572.421010] IP: [<ffffffffa00b2514>] ftrace_raw_event_i915_context+0x5d/0x70 [i915] [ 1572.424970] PGD 1766a3067 PUD 1767a2067 PMD 0 [ 1572.428892] Oops: 0000 [#1] SMP [ 1572.432787] Modules linked in: ipv6 dm_mod iTCO_wdt iTCO_vendor_support snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd soundcore serio_raw pcspkr lpc_ich i2c_i801 mfd_core battery ac acpi_cpufreq i915 button video drm_kms_helper drm [ 1572.441720] CPU: 2 PID: 18853 Comm: kworker/u8:0 Not tainted 4.0.0_kcloud_3f0360_20150429+ #588 [ 1572.446298] Workqueue: i915 i915_gem_retire_work_handler [i915] [ 1572.450876] task: ffff880002f428f0 ti: ffff880035724000 task.ti: ffff880035724000 [ 1572.455557] RIP: 0010:[<ffffffffa00b2514>] [<ffffffffa00b2514>] ftrace_raw_event_i915_context+0x5d/0x70 [i915] [ 1572.460423] RSP: 0018:ffff880035727ce8 EFLAGS: 00010286 [ 1572.465262] RAX: ffff880073f1643c RBX: ffff880002da9058 RCX: ffff880073e5db40 [ 1572.470179] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880035727ce8 [ 1572.475107] RBP: ffff88007bb11a00 R08: 0000000000000000 R09: 0000000000000000 [ 1572.480034] R10: 0000000000362200 R11: 0000000000000008 R12: 0000000000000000 [ 1572.484952] R13: ffff880035727d78 R14: ffff880002dc1c98 R15: ffff880002dc1dc8 [ 1572.489886] FS: 0000000000000000(0000) GS:ffff88017fd00000(0000) knlGS:0000000000000000 [ 1572.494883] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1572.499859] CR2: 0000000000000000 CR3: 000000017572a000 CR4: 00000000001006e0 [ 1572.504842] Stack: [ 1572.509834] ffff88017b0090c0 ffff880073f16438 ffff880002da9058 ffff880073f1643c [ 1572.514904] 0000000000000246 ffff880100000000 ffff88007bb11a00 ffff880002ddeb10 [ 1572.519985] ffff8801759f79c0 ffffffffa0092ff0 0000000000000000 ffff88007bb11a00 [ 1572.525049] Call Trace: [ 1572.530093] [<ffffffffa0092ff0>] ? i915_gem_context_free+0xa8/0xc1 [i915] [ 1572.535227] [<ffffffffa009b969>] ? i915_gem_request_free+0x4e/0x50 [i915] [ 1572.540347] [<ffffffffa00b5533>] ? intel_execlists_retire_requests+0x14c/0x159 [i915] [ 1572.545500] [<ffffffffa009d9ea>] ? i915_gem_retire_requests+0x9d/0xeb [i915] [ 1572.550664] [<ffffffffa009dd8c>] ? i915_gem_retire_work_handler+0x4c/0x61 [i915] [ 1572.555825] [<ffffffff8104ca7f>] ? process_one_work+0x1b2/0x31d [ 1572.560951] [<ffffffff8104d278>] ? worker_thread+0x24d/0x339 [ 1572.566033] [<ffffffff8104d02b>] ? cancel_delayed_work_sync+0xa/0xa [ 1572.571140] [<ffffffff81050b25>] ? kthread+0xce/0xd6 [ 1572.576191] [<ffffffff81050a57>] ? kthread_create_on_node+0x162/0x162 [ 1572.581228] [<ffffffff8179b3c8>] ? ret_from_fork+0x58/0x90 [ 1572.586259] [<ffffffff81050a57>] ? kthread_create_on_node+0x162/0x162 [ 1572.591318] Code: de 48 89 e7 e8 09 4d 00 e1 48 85 c0 74 27 48 89 68 10 48 8b 55 38 48 89 e7 48 89 50 18 48 8b 55 10 48 8b 12 48 8b 12 48 8b 52 38 <8b> 12 89 50 08 e8 95 4d 00 e1 48 83 c4 30 5b 5d 41 5c c3 41 55 [ 1572.596981] RIP [<ffffffffa00b2514>] ftrace_raw_event_i915_context+0x5d/0x70 [i915] [ 1572.602464] RSP <ffff880035727ce8> [ 1572.607911] CR2: 0000000000000000 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90112#c23 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-05 15:17:29 +07:00
ctx->i915 = dev_priv;
ctx->sched.priority = I915_USER_PRIORITY(I915_PRIORITY_NORMAL);
for (n = 0; n < ARRAY_SIZE(ctx->__engine); n++)
intel_context_init(&ctx->__engine[n], ctx, dev_priv->engine[n]);
INIT_RADIX_TREE(&ctx->handles_vma, GFP_KERNEL);
INIT_LIST_HEAD(&ctx->handles_list);
drm/i915: Reduce context HW ID lifetime Future gen reduce the number of bits we will have available to differentiate between contexts, so reduce the lifetime of the ID assignment from that of the context to its current active cycle (i.e. only while it is pinned for use by the HW, will it have a constant ID). This means that instead of a max of 2k allocated contexts (worst case before fun with bit twiddling), we instead have a limit of 2k in flight contexts (minus a few that have been pinned by the kernel or by perf). To reduce the number of contexts id we require, we allocate a context id on first and mark it as pinned for as long as the GEM context itself is, that is we keep it pinned it while active on each engine. If we exhaust our context id space, then we try to reclaim an id from an idle context. In the extreme case where all context ids are pinned by active contexts, we force the system to idle in order to recover ids. We cannot reduce the scope of an HW-ID to an engine (allowing the same gem_context to have different ids on each engine) as in the future we will need to preassign an id before we know which engine the context is being executed on. v2: Improved commentary (Tvrtko) [I tried at least] References: https://bugs.freedesktop.org/show_bug.cgi?id=107788 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180904153117.3907-1-chris@chris-wilson.co.uk
2018-09-04 22:31:17 +07:00
INIT_LIST_HEAD(&ctx->hw_id_link);
/* Default context will never have a file_priv */
ret = DEFAULT_CONTEXT_HANDLE;
if (file_priv) {
ret = idr_alloc(&file_priv->context_idr, ctx,
drm/i915: Emphasize that ctx->id is merely a user handle This is an Execlists preparatory patch, since they make context ID become an overloaded term: - In the software, it was used to distinguish which context userspace was trying to use. - In the BSpec, the term is used to describe the 20-bits long field the hardware uses to it to discriminate the contexts that are submitted to the ELSP and inform the driver about their current status (via Context Switch Interrupts and Context Status Buffers). Initially, I tried to make the different meanings converge, but it proved impossible: - The software ctx->id is per-filp, while the hardware one needs to be globally unique. - Also, we multiplex several backing states objects per intel_context, and all of them need unique HW IDs. - I tried adding a per-filp ID and then composing the HW context ID as: ctx->id + file_priv->id + ring->id, but the fact that the hardware only uses 20-bits means we have to artificially limit the number of filps or contexts the userspace can create. The ctx->user_handle renaming bits are done with this Cocci patch (plus manual frobbing of the struct declaration): @@ struct intel_context c; @@ - (c).id + c.user_handle @@ struct intel_context *c; @@ - (c)->id + c->user_handle Also, while we are at it, s/DEFAULT_CONTEXT_ID/DEFAULT_CONTEXT_HANDLE and change the type to unsigned 32 bits. v2: s/handle/user_handle and change the type to uint32_t as suggested by Chris Wilson. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v1) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-03 22:28:00 +07:00
DEFAULT_CONTEXT_HANDLE, 0, GFP_KERNEL);
if (ret < 0)
goto err_lut;
}
ctx->user_handle = ret;
ctx->file_priv = file_priv;
if (file_priv) {
ctx->pid = get_task_pid(current, PIDTYPE_PID);
ctx->name = kasprintf(GFP_KERNEL, "%s[%d]/%x",
current->comm,
pid_nr(ctx->pid),
ctx->user_handle);
if (!ctx->name) {
ret = -ENOMEM;
goto err_pid;
}
}
drm/i915: Do remaps for all contexts On both Ivybridge and Haswell, row remapping information is saved and restored with context. This means, we never actually properly supported the l3 remapping because our sysfs interface is asynchronous (and not tied to any context), and the known faulty HW would be reused by the next context to run. Not that due to the asynchronous nature of the sysfs entry, there is no point modifying the registers for the existing context. Instead we set a flag for all contexts to load the correct remapping information on the next run. Interested clients can use debugfs to determine whether or not the row has been remapped. One could propose at this point that we just do the remapping in the kernel. I guess since we have to maintain the sysfs interface anyway, I'm not sure how useful it is, and I do like keeping the policy in userspace; (it wasn't my original decision to make the interface the way it is, so I'm not attached). v2: Force a context switch when we have a remap on the next switch. (Ville) Don't let userspace use the interface with disabled contexts. v3: Don't force a context switch, just let it nop Improper context slice remap initialization, 1<<1 instead of 1<<i, but I rewrote it to avoid a second round of confusion. Error print moved to error path (All Ville) Added a comment on why the slice remap initialization happens. CC: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-19 09:03:18 +07:00
/* NB: Mark all slices as needing a remap so that when the context first
* loads it will restore whatever remap state already exists. If there
* is no remap info, it will be a NOP. */
ctx->remap_slice = ALL_L3_SLICES(dev_priv);
i915_gem_context_set_bannable(ctx);
ctx->ring_size = 4 * PAGE_SIZE;
ctx->desc_template =
default_desc_template(dev_priv, dev_priv->mm.aliasing_ppgtt);
return ctx;
err_pid:
put_pid(ctx->pid);
idr_remove(&file_priv->context_idr, ctx->user_handle);
err_lut:
context_close(ctx);
return ERR_PTR(ret);
}
static void __destroy_hw_context(struct i915_gem_context *ctx,
struct drm_i915_file_private *file_priv)
{
idr_remove(&file_priv->context_idr, ctx->user_handle);
context_close(ctx);
}
static struct i915_gem_context *
i915_gem_create_context(struct drm_i915_private *dev_priv,
struct drm_i915_file_private *file_priv)
drm/i915: preliminary context support Very basic code for context setup/destruction in the driver. Adds the file i915_gem_context.c This file implements HW context support. On gen5+ a HW context consists of an opaque GPU object which is referenced at times of context saves and restores. With RC6 enabled, the context is also referenced as the GPU enters and exists from RC6 (GPU has it's own internal power context, except on gen5). Though something like a context does exist for the media ring, the code only supports contexts for the render ring. In software, there is a distinction between contexts created by the user, and the default HW context. The default HW context is used by GPU clients that do not request setup of their own hardware context. The default context's state is never restored to help prevent programming errors. This would happen if a client ran and piggy-backed off another clients GPU state. The default context only exists to give the GPU some offset to load as the current to invoke a save of the context we actually care about. In fact, the code could likely be constructed, albeit in a more complicated fashion, to never use the default context, though that limits the driver's ability to swap out, and/or destroy other contexts. All other contexts are created as a request by the GPU client. These contexts store GPU state, and thus allow GPU clients to not re-emit state (and potentially query certain state) at any time. The kernel driver makes certain that the appropriate commands are inserted. There are 4 entry points into the contexts, init, fini, open, close. The names are self-explanatory except that init can be called during reset, and also during pm thaw/resume. As we expect our context to be preserved across these events, we do not reinitialize in this case. As Adam Jackson pointed out, The cutoff of 1MB where a HW context is considered too big is arbitrary. The reason for this is even though context sizes are increasing with every generation, they have yet to eclipse even 32k. If we somehow read back way more than that, it probably means BIOS has done something strange, or we're running on a platform that wasn't designed for this. v2: rename load/unload to init/fini (daniel) remove ILK support for get_size() (indirectly daniel) add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel) added comments (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-05 04:42:42 +07:00
{
struct i915_gem_context *ctx;
lockdep_assert_held(&dev_priv->drm.struct_mutex);
/* Reap the most stale context */
contexts_free_first(dev_priv);
ctx = __create_hw_context(dev_priv, file_priv);
if (IS_ERR(ctx))
return ctx;
if (HAS_FULL_PPGTT(dev_priv)) {
struct i915_hw_ppgtt *ppgtt;
ppgtt = i915_ppgtt_create(dev_priv, file_priv);
if (IS_ERR(ppgtt)) {
DRM_DEBUG_DRIVER("PPGTT setup failed (%ld)\n",
PTR_ERR(ppgtt));
__destroy_hw_context(ctx, file_priv);
return ERR_CAST(ppgtt);
}
ctx->ppgtt = ppgtt;
ctx->desc_template = default_desc_template(dev_priv, ppgtt);
}
trace_i915_context_create(ctx);
return ctx;
drm/i915: preliminary context support Very basic code for context setup/destruction in the driver. Adds the file i915_gem_context.c This file implements HW context support. On gen5+ a HW context consists of an opaque GPU object which is referenced at times of context saves and restores. With RC6 enabled, the context is also referenced as the GPU enters and exists from RC6 (GPU has it's own internal power context, except on gen5). Though something like a context does exist for the media ring, the code only supports contexts for the render ring. In software, there is a distinction between contexts created by the user, and the default HW context. The default HW context is used by GPU clients that do not request setup of their own hardware context. The default context's state is never restored to help prevent programming errors. This would happen if a client ran and piggy-backed off another clients GPU state. The default context only exists to give the GPU some offset to load as the current to invoke a save of the context we actually care about. In fact, the code could likely be constructed, albeit in a more complicated fashion, to never use the default context, though that limits the driver's ability to swap out, and/or destroy other contexts. All other contexts are created as a request by the GPU client. These contexts store GPU state, and thus allow GPU clients to not re-emit state (and potentially query certain state) at any time. The kernel driver makes certain that the appropriate commands are inserted. There are 4 entry points into the contexts, init, fini, open, close. The names are self-explanatory except that init can be called during reset, and also during pm thaw/resume. As we expect our context to be preserved across these events, we do not reinitialize in this case. As Adam Jackson pointed out, The cutoff of 1MB where a HW context is considered too big is arbitrary. The reason for this is even though context sizes are increasing with every generation, they have yet to eclipse even 32k. If we somehow read back way more than that, it probably means BIOS has done something strange, or we're running on a platform that wasn't designed for this. v2: rename load/unload to init/fini (daniel) remove ILK support for get_size() (indirectly daniel) add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel) added comments (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-05 04:42:42 +07:00
}
/**
* i915_gem_context_create_gvt - create a GVT GEM context
* @dev: drm device *
*
* This function is used to create a GVT specific GEM context.
*
* Returns:
* pointer to i915_gem_context on success, error pointer if failed
*
*/
struct i915_gem_context *
i915_gem_context_create_gvt(struct drm_device *dev)
{
struct i915_gem_context *ctx;
int ret;
if (!IS_ENABLED(CONFIG_DRM_I915_GVT))
return ERR_PTR(-ENODEV);
ret = i915_mutex_lock_interruptible(dev);
if (ret)
return ERR_PTR(ret);
drm/i915: Add ppgtt to GVT GEM context Currently the guest couldn't boot up under GVT-g environment as the following call trace exists: [ 272.504762] BUG: unable to handle kernel NULL pointer dereference at 0000000000000100 [ 272.504834] Call Trace: [ 272.504852] execlists_context_pin+0x2b2/0x520 [i915] [ 272.504869] intel_gvt_scan_and_shadow_workload+0x50/0x4d0 [i915] [ 272.504887] intel_vgpu_create_workload+0x3e2/0x570 [i915] [ 272.504901] intel_vgpu_submit_execlist+0xc0/0x2a0 [i915] [ 272.504916] elsp_mmio_write+0xc7/0x130 [i915] [ 272.504930] intel_vgpu_mmio_reg_rw+0x24a/0x4c0 [i915] [ 272.504944] intel_vgpu_emulate_mmio_write+0xac/0x240 [i915] [ 272.504947] intel_vgpu_rw+0x22d/0x270 [kvmgt] [ 272.504949] intel_vgpu_write+0x164/0x1f0 [kvmgt] GVT GEM context is created by i915_gem_context_create_gvt() which doesn't allocate ppgtt. So GVT GEM context structure doesn't have a valid i915_hw_ppgtt. This patch create ppgtt table at GVT GEM context creation, then assign shadow ppgtt's root table address to this ppgtt when shadow ppgtt will be used on GPU. So GVT GEM context has valid ppgtt address. But note that this ppgtt only contain valid ppgtt root table address, the table entry in this ppgtt structure are invalid. Fixes:4a3d3f6785be("drm/i915: Match code to comment and enforce ppgtt for execlists") Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/1539841231-3157-1-git-send-email-xiong.y.zhang@intel.com
2018-10-18 12:40:31 +07:00
ctx = i915_gem_create_context(to_i915(dev), NULL);
if (IS_ERR(ctx))
goto out;
ctx->file_priv = ERR_PTR(-EBADF);
i915_gem_context_set_closed(ctx); /* not user accessible */
i915_gem_context_clear_bannable(ctx);
i915_gem_context_set_force_single_submission(ctx);
if (!USES_GUC_SUBMISSION(to_i915(dev)))
ctx->ring_size = 512 * PAGE_SIZE; /* Max ring buffer size */
GEM_BUG_ON(i915_gem_context_is_kernel(ctx));
out:
mutex_unlock(&dev->struct_mutex);
return ctx;
}
drm/i915: Reduce context HW ID lifetime Future gen reduce the number of bits we will have available to differentiate between contexts, so reduce the lifetime of the ID assignment from that of the context to its current active cycle (i.e. only while it is pinned for use by the HW, will it have a constant ID). This means that instead of a max of 2k allocated contexts (worst case before fun with bit twiddling), we instead have a limit of 2k in flight contexts (minus a few that have been pinned by the kernel or by perf). To reduce the number of contexts id we require, we allocate a context id on first and mark it as pinned for as long as the GEM context itself is, that is we keep it pinned it while active on each engine. If we exhaust our context id space, then we try to reclaim an id from an idle context. In the extreme case where all context ids are pinned by active contexts, we force the system to idle in order to recover ids. We cannot reduce the scope of an HW-ID to an engine (allowing the same gem_context to have different ids on each engine) as in the future we will need to preassign an id before we know which engine the context is being executed on. v2: Improved commentary (Tvrtko) [I tried at least] References: https://bugs.freedesktop.org/show_bug.cgi?id=107788 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180904153117.3907-1-chris@chris-wilson.co.uk
2018-09-04 22:31:17 +07:00
static void
destroy_kernel_context(struct i915_gem_context **ctxp)
{
struct i915_gem_context *ctx;
/* Keep the context ref so that we can free it immediately ourselves */
ctx = i915_gem_context_get(fetch_and_zero(ctxp));
GEM_BUG_ON(!i915_gem_context_is_kernel(ctx));
context_close(ctx);
i915_gem_context_free(ctx);
}
struct i915_gem_context *
i915_gem_context_create_kernel(struct drm_i915_private *i915, int prio)
{
struct i915_gem_context *ctx;
drm/i915: Reduce context HW ID lifetime Future gen reduce the number of bits we will have available to differentiate between contexts, so reduce the lifetime of the ID assignment from that of the context to its current active cycle (i.e. only while it is pinned for use by the HW, will it have a constant ID). This means that instead of a max of 2k allocated contexts (worst case before fun with bit twiddling), we instead have a limit of 2k in flight contexts (minus a few that have been pinned by the kernel or by perf). To reduce the number of contexts id we require, we allocate a context id on first and mark it as pinned for as long as the GEM context itself is, that is we keep it pinned it while active on each engine. If we exhaust our context id space, then we try to reclaim an id from an idle context. In the extreme case where all context ids are pinned by active contexts, we force the system to idle in order to recover ids. We cannot reduce the scope of an HW-ID to an engine (allowing the same gem_context to have different ids on each engine) as in the future we will need to preassign an id before we know which engine the context is being executed on. v2: Improved commentary (Tvrtko) [I tried at least] References: https://bugs.freedesktop.org/show_bug.cgi?id=107788 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180904153117.3907-1-chris@chris-wilson.co.uk
2018-09-04 22:31:17 +07:00
int err;
ctx = i915_gem_create_context(i915, NULL);
if (IS_ERR(ctx))
return ctx;
drm/i915: Reduce context HW ID lifetime Future gen reduce the number of bits we will have available to differentiate between contexts, so reduce the lifetime of the ID assignment from that of the context to its current active cycle (i.e. only while it is pinned for use by the HW, will it have a constant ID). This means that instead of a max of 2k allocated contexts (worst case before fun with bit twiddling), we instead have a limit of 2k in flight contexts (minus a few that have been pinned by the kernel or by perf). To reduce the number of contexts id we require, we allocate a context id on first and mark it as pinned for as long as the GEM context itself is, that is we keep it pinned it while active on each engine. If we exhaust our context id space, then we try to reclaim an id from an idle context. In the extreme case where all context ids are pinned by active contexts, we force the system to idle in order to recover ids. We cannot reduce the scope of an HW-ID to an engine (allowing the same gem_context to have different ids on each engine) as in the future we will need to preassign an id before we know which engine the context is being executed on. v2: Improved commentary (Tvrtko) [I tried at least] References: https://bugs.freedesktop.org/show_bug.cgi?id=107788 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180904153117.3907-1-chris@chris-wilson.co.uk
2018-09-04 22:31:17 +07:00
err = i915_gem_context_pin_hw_id(ctx);
if (err) {
destroy_kernel_context(&ctx);
return ERR_PTR(err);
}
i915_gem_context_clear_bannable(ctx);
ctx->sched.priority = I915_USER_PRIORITY(prio);
ctx->ring_size = PAGE_SIZE;
GEM_BUG_ON(!i915_gem_context_is_kernel(ctx));
return ctx;
}
drm/i915: Reduce context HW ID lifetime Future gen reduce the number of bits we will have available to differentiate between contexts, so reduce the lifetime of the ID assignment from that of the context to its current active cycle (i.e. only while it is pinned for use by the HW, will it have a constant ID). This means that instead of a max of 2k allocated contexts (worst case before fun with bit twiddling), we instead have a limit of 2k in flight contexts (minus a few that have been pinned by the kernel or by perf). To reduce the number of contexts id we require, we allocate a context id on first and mark it as pinned for as long as the GEM context itself is, that is we keep it pinned it while active on each engine. If we exhaust our context id space, then we try to reclaim an id from an idle context. In the extreme case where all context ids are pinned by active contexts, we force the system to idle in order to recover ids. We cannot reduce the scope of an HW-ID to an engine (allowing the same gem_context to have different ids on each engine) as in the future we will need to preassign an id before we know which engine the context is being executed on. v2: Improved commentary (Tvrtko) [I tried at least] References: https://bugs.freedesktop.org/show_bug.cgi?id=107788 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180904153117.3907-1-chris@chris-wilson.co.uk
2018-09-04 22:31:17 +07:00
static void init_contexts(struct drm_i915_private *i915)
{
drm/i915: Reduce context HW ID lifetime Future gen reduce the number of bits we will have available to differentiate between contexts, so reduce the lifetime of the ID assignment from that of the context to its current active cycle (i.e. only while it is pinned for use by the HW, will it have a constant ID). This means that instead of a max of 2k allocated contexts (worst case before fun with bit twiddling), we instead have a limit of 2k in flight contexts (minus a few that have been pinned by the kernel or by perf). To reduce the number of contexts id we require, we allocate a context id on first and mark it as pinned for as long as the GEM context itself is, that is we keep it pinned it while active on each engine. If we exhaust our context id space, then we try to reclaim an id from an idle context. In the extreme case where all context ids are pinned by active contexts, we force the system to idle in order to recover ids. We cannot reduce the scope of an HW-ID to an engine (allowing the same gem_context to have different ids on each engine) as in the future we will need to preassign an id before we know which engine the context is being executed on. v2: Improved commentary (Tvrtko) [I tried at least] References: https://bugs.freedesktop.org/show_bug.cgi?id=107788 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180904153117.3907-1-chris@chris-wilson.co.uk
2018-09-04 22:31:17 +07:00
mutex_init(&i915->contexts.mutex);
INIT_LIST_HEAD(&i915->contexts.list);
drm/i915: Reduce context HW ID lifetime Future gen reduce the number of bits we will have available to differentiate between contexts, so reduce the lifetime of the ID assignment from that of the context to its current active cycle (i.e. only while it is pinned for use by the HW, will it have a constant ID). This means that instead of a max of 2k allocated contexts (worst case before fun with bit twiddling), we instead have a limit of 2k in flight contexts (minus a few that have been pinned by the kernel or by perf). To reduce the number of contexts id we require, we allocate a context id on first and mark it as pinned for as long as the GEM context itself is, that is we keep it pinned it while active on each engine. If we exhaust our context id space, then we try to reclaim an id from an idle context. In the extreme case where all context ids are pinned by active contexts, we force the system to idle in order to recover ids. We cannot reduce the scope of an HW-ID to an engine (allowing the same gem_context to have different ids on each engine) as in the future we will need to preassign an id before we know which engine the context is being executed on. v2: Improved commentary (Tvrtko) [I tried at least] References: https://bugs.freedesktop.org/show_bug.cgi?id=107788 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180904153117.3907-1-chris@chris-wilson.co.uk
2018-09-04 22:31:17 +07:00
/* Using the simple ida interface, the max is limited by sizeof(int) */
BUILD_BUG_ON(MAX_CONTEXT_HW_ID > INT_MAX);
BUILD_BUG_ON(GEN11_MAX_CONTEXT_HW_ID > INT_MAX);
ida_init(&i915->contexts.hw_ida);
INIT_LIST_HEAD(&i915->contexts.hw_id_list);
drm/i915: Reduce context HW ID lifetime Future gen reduce the number of bits we will have available to differentiate between contexts, so reduce the lifetime of the ID assignment from that of the context to its current active cycle (i.e. only while it is pinned for use by the HW, will it have a constant ID). This means that instead of a max of 2k allocated contexts (worst case before fun with bit twiddling), we instead have a limit of 2k in flight contexts (minus a few that have been pinned by the kernel or by perf). To reduce the number of contexts id we require, we allocate a context id on first and mark it as pinned for as long as the GEM context itself is, that is we keep it pinned it while active on each engine. If we exhaust our context id space, then we try to reclaim an id from an idle context. In the extreme case where all context ids are pinned by active contexts, we force the system to idle in order to recover ids. We cannot reduce the scope of an HW-ID to an engine (allowing the same gem_context to have different ids on each engine) as in the future we will need to preassign an id before we know which engine the context is being executed on. v2: Improved commentary (Tvrtko) [I tried at least] References: https://bugs.freedesktop.org/show_bug.cgi?id=107788 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180904153117.3907-1-chris@chris-wilson.co.uk
2018-09-04 22:31:17 +07:00
INIT_WORK(&i915->contexts.free_work, contexts_free_worker);
init_llist_head(&i915->contexts.free_list);
}
static bool needs_preempt_context(struct drm_i915_private *i915)
{
return HAS_LOGICAL_RING_PREEMPTION(i915);
}
int i915_gem_contexts_init(struct drm_i915_private *dev_priv)
drm/i915: preliminary context support Very basic code for context setup/destruction in the driver. Adds the file i915_gem_context.c This file implements HW context support. On gen5+ a HW context consists of an opaque GPU object which is referenced at times of context saves and restores. With RC6 enabled, the context is also referenced as the GPU enters and exists from RC6 (GPU has it's own internal power context, except on gen5). Though something like a context does exist for the media ring, the code only supports contexts for the render ring. In software, there is a distinction between contexts created by the user, and the default HW context. The default HW context is used by GPU clients that do not request setup of their own hardware context. The default context's state is never restored to help prevent programming errors. This would happen if a client ran and piggy-backed off another clients GPU state. The default context only exists to give the GPU some offset to load as the current to invoke a save of the context we actually care about. In fact, the code could likely be constructed, albeit in a more complicated fashion, to never use the default context, though that limits the driver's ability to swap out, and/or destroy other contexts. All other contexts are created as a request by the GPU client. These contexts store GPU state, and thus allow GPU clients to not re-emit state (and potentially query certain state) at any time. The kernel driver makes certain that the appropriate commands are inserted. There are 4 entry points into the contexts, init, fini, open, close. The names are self-explanatory except that init can be called during reset, and also during pm thaw/resume. As we expect our context to be preserved across these events, we do not reinitialize in this case. As Adam Jackson pointed out, The cutoff of 1MB where a HW context is considered too big is arbitrary. The reason for this is even though context sizes are increasing with every generation, they have yet to eclipse even 32k. If we somehow read back way more than that, it probably means BIOS has done something strange, or we're running on a platform that wasn't designed for this. v2: rename load/unload to init/fini (daniel) remove ILK support for get_size() (indirectly daniel) add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel) added comments (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-05 04:42:42 +07:00
{
struct i915_gem_context *ctx;
drm/i915: preliminary context support Very basic code for context setup/destruction in the driver. Adds the file i915_gem_context.c This file implements HW context support. On gen5+ a HW context consists of an opaque GPU object which is referenced at times of context saves and restores. With RC6 enabled, the context is also referenced as the GPU enters and exists from RC6 (GPU has it's own internal power context, except on gen5). Though something like a context does exist for the media ring, the code only supports contexts for the render ring. In software, there is a distinction between contexts created by the user, and the default HW context. The default HW context is used by GPU clients that do not request setup of their own hardware context. The default context's state is never restored to help prevent programming errors. This would happen if a client ran and piggy-backed off another clients GPU state. The default context only exists to give the GPU some offset to load as the current to invoke a save of the context we actually care about. In fact, the code could likely be constructed, albeit in a more complicated fashion, to never use the default context, though that limits the driver's ability to swap out, and/or destroy other contexts. All other contexts are created as a request by the GPU client. These contexts store GPU state, and thus allow GPU clients to not re-emit state (and potentially query certain state) at any time. The kernel driver makes certain that the appropriate commands are inserted. There are 4 entry points into the contexts, init, fini, open, close. The names are self-explanatory except that init can be called during reset, and also during pm thaw/resume. As we expect our context to be preserved across these events, we do not reinitialize in this case. As Adam Jackson pointed out, The cutoff of 1MB where a HW context is considered too big is arbitrary. The reason for this is even though context sizes are increasing with every generation, they have yet to eclipse even 32k. If we somehow read back way more than that, it probably means BIOS has done something strange, or we're running on a platform that wasn't designed for this. v2: rename load/unload to init/fini (daniel) remove ILK support for get_size() (indirectly daniel) add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel) added comments (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-05 04:42:42 +07:00
/* Reassure ourselves we are only called once */
GEM_BUG_ON(dev_priv->kernel_context);
GEM_BUG_ON(dev_priv->preempt_context);
drm/i915: preliminary context support Very basic code for context setup/destruction in the driver. Adds the file i915_gem_context.c This file implements HW context support. On gen5+ a HW context consists of an opaque GPU object which is referenced at times of context saves and restores. With RC6 enabled, the context is also referenced as the GPU enters and exists from RC6 (GPU has it's own internal power context, except on gen5). Though something like a context does exist for the media ring, the code only supports contexts for the render ring. In software, there is a distinction between contexts created by the user, and the default HW context. The default HW context is used by GPU clients that do not request setup of their own hardware context. The default context's state is never restored to help prevent programming errors. This would happen if a client ran and piggy-backed off another clients GPU state. The default context only exists to give the GPU some offset to load as the current to invoke a save of the context we actually care about. In fact, the code could likely be constructed, albeit in a more complicated fashion, to never use the default context, though that limits the driver's ability to swap out, and/or destroy other contexts. All other contexts are created as a request by the GPU client. These contexts store GPU state, and thus allow GPU clients to not re-emit state (and potentially query certain state) at any time. The kernel driver makes certain that the appropriate commands are inserted. There are 4 entry points into the contexts, init, fini, open, close. The names are self-explanatory except that init can be called during reset, and also during pm thaw/resume. As we expect our context to be preserved across these events, we do not reinitialize in this case. As Adam Jackson pointed out, The cutoff of 1MB where a HW context is considered too big is arbitrary. The reason for this is even though context sizes are increasing with every generation, they have yet to eclipse even 32k. If we somehow read back way more than that, it probably means BIOS has done something strange, or we're running on a platform that wasn't designed for this. v2: rename load/unload to init/fini (daniel) remove ILK support for get_size() (indirectly daniel) add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel) added comments (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-05 04:42:42 +07:00
intel_engine_init_ctx_wa(dev_priv->engine[RCS]);
drm/i915: Reduce context HW ID lifetime Future gen reduce the number of bits we will have available to differentiate between contexts, so reduce the lifetime of the ID assignment from that of the context to its current active cycle (i.e. only while it is pinned for use by the HW, will it have a constant ID). This means that instead of a max of 2k allocated contexts (worst case before fun with bit twiddling), we instead have a limit of 2k in flight contexts (minus a few that have been pinned by the kernel or by perf). To reduce the number of contexts id we require, we allocate a context id on first and mark it as pinned for as long as the GEM context itself is, that is we keep it pinned it while active on each engine. If we exhaust our context id space, then we try to reclaim an id from an idle context. In the extreme case where all context ids are pinned by active contexts, we force the system to idle in order to recover ids. We cannot reduce the scope of an HW-ID to an engine (allowing the same gem_context to have different ids on each engine) as in the future we will need to preassign an id before we know which engine the context is being executed on. v2: Improved commentary (Tvrtko) [I tried at least] References: https://bugs.freedesktop.org/show_bug.cgi?id=107788 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180904153117.3907-1-chris@chris-wilson.co.uk
2018-09-04 22:31:17 +07:00
init_contexts(dev_priv);
/* lowest priority; idle task */
ctx = i915_gem_context_create_kernel(dev_priv, I915_PRIORITY_MIN);
if (IS_ERR(ctx)) {
DRM_ERROR("Failed to create default global context\n");
return PTR_ERR(ctx);
drm/i915: preliminary context support Very basic code for context setup/destruction in the driver. Adds the file i915_gem_context.c This file implements HW context support. On gen5+ a HW context consists of an opaque GPU object which is referenced at times of context saves and restores. With RC6 enabled, the context is also referenced as the GPU enters and exists from RC6 (GPU has it's own internal power context, except on gen5). Though something like a context does exist for the media ring, the code only supports contexts for the render ring. In software, there is a distinction between contexts created by the user, and the default HW context. The default HW context is used by GPU clients that do not request setup of their own hardware context. The default context's state is never restored to help prevent programming errors. This would happen if a client ran and piggy-backed off another clients GPU state. The default context only exists to give the GPU some offset to load as the current to invoke a save of the context we actually care about. In fact, the code could likely be constructed, albeit in a more complicated fashion, to never use the default context, though that limits the driver's ability to swap out, and/or destroy other contexts. All other contexts are created as a request by the GPU client. These contexts store GPU state, and thus allow GPU clients to not re-emit state (and potentially query certain state) at any time. The kernel driver makes certain that the appropriate commands are inserted. There are 4 entry points into the contexts, init, fini, open, close. The names are self-explanatory except that init can be called during reset, and also during pm thaw/resume. As we expect our context to be preserved across these events, we do not reinitialize in this case. As Adam Jackson pointed out, The cutoff of 1MB where a HW context is considered too big is arbitrary. The reason for this is even though context sizes are increasing with every generation, they have yet to eclipse even 32k. If we somehow read back way more than that, it probably means BIOS has done something strange, or we're running on a platform that wasn't designed for this. v2: rename load/unload to init/fini (daniel) remove ILK support for get_size() (indirectly daniel) add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel) added comments (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-05 04:42:42 +07:00
}
/*
* For easy recognisablity, we want the kernel context to be 0 and then
drm/i915: Reduce context HW ID lifetime Future gen reduce the number of bits we will have available to differentiate between contexts, so reduce the lifetime of the ID assignment from that of the context to its current active cycle (i.e. only while it is pinned for use by the HW, will it have a constant ID). This means that instead of a max of 2k allocated contexts (worst case before fun with bit twiddling), we instead have a limit of 2k in flight contexts (minus a few that have been pinned by the kernel or by perf). To reduce the number of contexts id we require, we allocate a context id on first and mark it as pinned for as long as the GEM context itself is, that is we keep it pinned it while active on each engine. If we exhaust our context id space, then we try to reclaim an id from an idle context. In the extreme case where all context ids are pinned by active contexts, we force the system to idle in order to recover ids. We cannot reduce the scope of an HW-ID to an engine (allowing the same gem_context to have different ids on each engine) as in the future we will need to preassign an id before we know which engine the context is being executed on. v2: Improved commentary (Tvrtko) [I tried at least] References: https://bugs.freedesktop.org/show_bug.cgi?id=107788 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180904153117.3907-1-chris@chris-wilson.co.uk
2018-09-04 22:31:17 +07:00
* all user contexts will have non-zero hw_id. Kernel contexts are
* permanently pinned, so that we never suffer a stall and can
* use them from any allocation context (e.g. for evicting other
* contexts and from inside the shrinker).
*/
GEM_BUG_ON(ctx->hw_id);
drm/i915: Reduce context HW ID lifetime Future gen reduce the number of bits we will have available to differentiate between contexts, so reduce the lifetime of the ID assignment from that of the context to its current active cycle (i.e. only while it is pinned for use by the HW, will it have a constant ID). This means that instead of a max of 2k allocated contexts (worst case before fun with bit twiddling), we instead have a limit of 2k in flight contexts (minus a few that have been pinned by the kernel or by perf). To reduce the number of contexts id we require, we allocate a context id on first and mark it as pinned for as long as the GEM context itself is, that is we keep it pinned it while active on each engine. If we exhaust our context id space, then we try to reclaim an id from an idle context. In the extreme case where all context ids are pinned by active contexts, we force the system to idle in order to recover ids. We cannot reduce the scope of an HW-ID to an engine (allowing the same gem_context to have different ids on each engine) as in the future we will need to preassign an id before we know which engine the context is being executed on. v2: Improved commentary (Tvrtko) [I tried at least] References: https://bugs.freedesktop.org/show_bug.cgi?id=107788 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180904153117.3907-1-chris@chris-wilson.co.uk
2018-09-04 22:31:17 +07:00
GEM_BUG_ON(!atomic_read(&ctx->hw_id_pin_count));
dev_priv->kernel_context = ctx;
/* highest priority; preempting task */
if (needs_preempt_context(dev_priv)) {
ctx = i915_gem_context_create_kernel(dev_priv, INT_MAX);
if (!IS_ERR(ctx))
dev_priv->preempt_context = ctx;
else
DRM_ERROR("Failed to create preempt context; disabling preemption\n");
}
DRM_DEBUG_DRIVER("%s context support initialized\n",
DRIVER_CAPS(dev_priv)->has_logical_contexts ?
"logical" : "fake");
return 0;
drm/i915: preliminary context support Very basic code for context setup/destruction in the driver. Adds the file i915_gem_context.c This file implements HW context support. On gen5+ a HW context consists of an opaque GPU object which is referenced at times of context saves and restores. With RC6 enabled, the context is also referenced as the GPU enters and exists from RC6 (GPU has it's own internal power context, except on gen5). Though something like a context does exist for the media ring, the code only supports contexts for the render ring. In software, there is a distinction between contexts created by the user, and the default HW context. The default HW context is used by GPU clients that do not request setup of their own hardware context. The default context's state is never restored to help prevent programming errors. This would happen if a client ran and piggy-backed off another clients GPU state. The default context only exists to give the GPU some offset to load as the current to invoke a save of the context we actually care about. In fact, the code could likely be constructed, albeit in a more complicated fashion, to never use the default context, though that limits the driver's ability to swap out, and/or destroy other contexts. All other contexts are created as a request by the GPU client. These contexts store GPU state, and thus allow GPU clients to not re-emit state (and potentially query certain state) at any time. The kernel driver makes certain that the appropriate commands are inserted. There are 4 entry points into the contexts, init, fini, open, close. The names are self-explanatory except that init can be called during reset, and also during pm thaw/resume. As we expect our context to be preserved across these events, we do not reinitialize in this case. As Adam Jackson pointed out, The cutoff of 1MB where a HW context is considered too big is arbitrary. The reason for this is even though context sizes are increasing with every generation, they have yet to eclipse even 32k. If we somehow read back way more than that, it probably means BIOS has done something strange, or we're running on a platform that wasn't designed for this. v2: rename load/unload to init/fini (daniel) remove ILK support for get_size() (indirectly daniel) add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel) added comments (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-05 04:42:42 +07:00
}
void i915_gem_contexts_lost(struct drm_i915_private *dev_priv)
{
struct intel_engine_cs *engine;
drm/i915: Allocate intel_engine_cs structure only for the enabled engines With the possibility of addition of many more number of rings in future, the drm_i915_private structure could bloat as an array, of type intel_engine_cs, is embedded inside it. struct intel_engine_cs engine[I915_NUM_ENGINES]; Though this is still fine as generally there is only a single instance of drm_i915_private structure used, but not all of the possible rings would be enabled or active on most of the platforms. Some memory can be saved by allocating intel_engine_cs structure only for the enabled/active engines. Currently the engine/ring ID is kept static and dev_priv->engine[] is simply indexed using the enums defined in intel_engine_id. To save memory and continue using the static engine/ring IDs, 'engine' is defined as an array of pointers. struct intel_engine_cs *engine[I915_NUM_ENGINES]; dev_priv->engine[engine_ID] will be NULL for disabled engine instances. There is a text size reduction of 928 bytes, from 1028200 to 1027272, for i915.o file (but for i915.ko file text size remain same as 1193131 bytes). v2: - Remove the engine iterator field added in drm_i915_private structure, instead pass a local iterator variable to the for_each_engine** macros. (Chris) - Do away with intel_engine_initialized() and instead directly use the NULL pointer check on engine pointer. (Chris) v3: - Remove for_each_engine_id() macro, as the updated macro for_each_engine() can be used in place of it. (Chris) - Protect the access to Render engine Fault register with a NULL check, as engine specific init is done later in Driver load sequence. v4: - Use !!dev_priv->engine[VCS] style for the engine check in getparam. (Chris) - Kill the superfluous init_engine_lists(). v5: - Cleanup the intel_engines_init() & intel_engines_setup(), with respect to allocation of intel_engine_cs structure. (Chris) v6: - Rebase. v7: - Optimize the for_each_engine_masked() macro. (Chris) - Change the type of 'iter' local variable to enum intel_engine_id. (Chris) - Rebase. v8: Rebase. v9: Rebase. v10: - For index calculation use engine ID instead of pointer based arithmetic in intel_engine_sync_index() as engine pointers are not contiguous now (Chris) - For appropriateness, rename local enum variable 'iter' to 'id'. (Joonas) - Use for_each_engine macro for cleanup in intel_engines_init() and remove check for NULL engine pointer in cleanup() routines. (Joonas) v11: Rebase. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Akash Goel <akash.goel@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476378888-7372-1-git-send-email-akash.goel@intel.com
2016-10-14 00:14:48 +07:00
enum intel_engine_id id;
lockdep_assert_held(&dev_priv->drm.struct_mutex);
for_each_engine(engine, dev_priv, id)
intel_engine_lost_context(engine);
}
void i915_gem_contexts_fini(struct drm_i915_private *i915)
drm/i915: preliminary context support Very basic code for context setup/destruction in the driver. Adds the file i915_gem_context.c This file implements HW context support. On gen5+ a HW context consists of an opaque GPU object which is referenced at times of context saves and restores. With RC6 enabled, the context is also referenced as the GPU enters and exists from RC6 (GPU has it's own internal power context, except on gen5). Though something like a context does exist for the media ring, the code only supports contexts for the render ring. In software, there is a distinction between contexts created by the user, and the default HW context. The default HW context is used by GPU clients that do not request setup of their own hardware context. The default context's state is never restored to help prevent programming errors. This would happen if a client ran and piggy-backed off another clients GPU state. The default context only exists to give the GPU some offset to load as the current to invoke a save of the context we actually care about. In fact, the code could likely be constructed, albeit in a more complicated fashion, to never use the default context, though that limits the driver's ability to swap out, and/or destroy other contexts. All other contexts are created as a request by the GPU client. These contexts store GPU state, and thus allow GPU clients to not re-emit state (and potentially query certain state) at any time. The kernel driver makes certain that the appropriate commands are inserted. There are 4 entry points into the contexts, init, fini, open, close. The names are self-explanatory except that init can be called during reset, and also during pm thaw/resume. As we expect our context to be preserved across these events, we do not reinitialize in this case. As Adam Jackson pointed out, The cutoff of 1MB where a HW context is considered too big is arbitrary. The reason for this is even though context sizes are increasing with every generation, they have yet to eclipse even 32k. If we somehow read back way more than that, it probably means BIOS has done something strange, or we're running on a platform that wasn't designed for this. v2: rename load/unload to init/fini (daniel) remove ILK support for get_size() (indirectly daniel) add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel) added comments (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-05 04:42:42 +07:00
{
lockdep_assert_held(&i915->drm.struct_mutex);
if (i915->preempt_context)
destroy_kernel_context(&i915->preempt_context);
destroy_kernel_context(&i915->kernel_context);
/* Must free all deferred contexts (via flush_workqueue) first */
drm/i915: Reduce context HW ID lifetime Future gen reduce the number of bits we will have available to differentiate between contexts, so reduce the lifetime of the ID assignment from that of the context to its current active cycle (i.e. only while it is pinned for use by the HW, will it have a constant ID). This means that instead of a max of 2k allocated contexts (worst case before fun with bit twiddling), we instead have a limit of 2k in flight contexts (minus a few that have been pinned by the kernel or by perf). To reduce the number of contexts id we require, we allocate a context id on first and mark it as pinned for as long as the GEM context itself is, that is we keep it pinned it while active on each engine. If we exhaust our context id space, then we try to reclaim an id from an idle context. In the extreme case where all context ids are pinned by active contexts, we force the system to idle in order to recover ids. We cannot reduce the scope of an HW-ID to an engine (allowing the same gem_context to have different ids on each engine) as in the future we will need to preassign an id before we know which engine the context is being executed on. v2: Improved commentary (Tvrtko) [I tried at least] References: https://bugs.freedesktop.org/show_bug.cgi?id=107788 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180904153117.3907-1-chris@chris-wilson.co.uk
2018-09-04 22:31:17 +07:00
GEM_BUG_ON(!list_empty(&i915->contexts.hw_id_list));
ida_destroy(&i915->contexts.hw_ida);
drm/i915: preliminary context support Very basic code for context setup/destruction in the driver. Adds the file i915_gem_context.c This file implements HW context support. On gen5+ a HW context consists of an opaque GPU object which is referenced at times of context saves and restores. With RC6 enabled, the context is also referenced as the GPU enters and exists from RC6 (GPU has it's own internal power context, except on gen5). Though something like a context does exist for the media ring, the code only supports contexts for the render ring. In software, there is a distinction between contexts created by the user, and the default HW context. The default HW context is used by GPU clients that do not request setup of their own hardware context. The default context's state is never restored to help prevent programming errors. This would happen if a client ran and piggy-backed off another clients GPU state. The default context only exists to give the GPU some offset to load as the current to invoke a save of the context we actually care about. In fact, the code could likely be constructed, albeit in a more complicated fashion, to never use the default context, though that limits the driver's ability to swap out, and/or destroy other contexts. All other contexts are created as a request by the GPU client. These contexts store GPU state, and thus allow GPU clients to not re-emit state (and potentially query certain state) at any time. The kernel driver makes certain that the appropriate commands are inserted. There are 4 entry points into the contexts, init, fini, open, close. The names are self-explanatory except that init can be called during reset, and also during pm thaw/resume. As we expect our context to be preserved across these events, we do not reinitialize in this case. As Adam Jackson pointed out, The cutoff of 1MB where a HW context is considered too big is arbitrary. The reason for this is even though context sizes are increasing with every generation, they have yet to eclipse even 32k. If we somehow read back way more than that, it probably means BIOS has done something strange, or we're running on a platform that wasn't designed for this. v2: rename load/unload to init/fini (daniel) remove ILK support for get_size() (indirectly daniel) add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel) added comments (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-05 04:42:42 +07:00
}
static int context_idr_cleanup(int id, void *p, void *data)
{
struct i915_gem_context *ctx = p;
context_close(ctx);
return 0;
drm/i915: preliminary context support Very basic code for context setup/destruction in the driver. Adds the file i915_gem_context.c This file implements HW context support. On gen5+ a HW context consists of an opaque GPU object which is referenced at times of context saves and restores. With RC6 enabled, the context is also referenced as the GPU enters and exists from RC6 (GPU has it's own internal power context, except on gen5). Though something like a context does exist for the media ring, the code only supports contexts for the render ring. In software, there is a distinction between contexts created by the user, and the default HW context. The default HW context is used by GPU clients that do not request setup of their own hardware context. The default context's state is never restored to help prevent programming errors. This would happen if a client ran and piggy-backed off another clients GPU state. The default context only exists to give the GPU some offset to load as the current to invoke a save of the context we actually care about. In fact, the code could likely be constructed, albeit in a more complicated fashion, to never use the default context, though that limits the driver's ability to swap out, and/or destroy other contexts. All other contexts are created as a request by the GPU client. These contexts store GPU state, and thus allow GPU clients to not re-emit state (and potentially query certain state) at any time. The kernel driver makes certain that the appropriate commands are inserted. There are 4 entry points into the contexts, init, fini, open, close. The names are self-explanatory except that init can be called during reset, and also during pm thaw/resume. As we expect our context to be preserved across these events, we do not reinitialize in this case. As Adam Jackson pointed out, The cutoff of 1MB where a HW context is considered too big is arbitrary. The reason for this is even though context sizes are increasing with every generation, they have yet to eclipse even 32k. If we somehow read back way more than that, it probably means BIOS has done something strange, or we're running on a platform that wasn't designed for this. v2: rename load/unload to init/fini (daniel) remove ILK support for get_size() (indirectly daniel) add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel) added comments (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-05 04:42:42 +07:00
}
int i915_gem_context_open(struct drm_i915_private *i915,
struct drm_file *file)
{
struct drm_i915_file_private *file_priv = file->driver_priv;
struct i915_gem_context *ctx;
idr_init(&file_priv->context_idr);
mutex_lock(&i915->drm.struct_mutex);
ctx = i915_gem_create_context(i915, file_priv);
mutex_unlock(&i915->drm.struct_mutex);
if (IS_ERR(ctx)) {
idr_destroy(&file_priv->context_idr);
return PTR_ERR(ctx);
}
GEM_BUG_ON(i915_gem_context_is_kernel(ctx));
return 0;
}
void i915_gem_context_close(struct drm_file *file)
drm/i915: preliminary context support Very basic code for context setup/destruction in the driver. Adds the file i915_gem_context.c This file implements HW context support. On gen5+ a HW context consists of an opaque GPU object which is referenced at times of context saves and restores. With RC6 enabled, the context is also referenced as the GPU enters and exists from RC6 (GPU has it's own internal power context, except on gen5). Though something like a context does exist for the media ring, the code only supports contexts for the render ring. In software, there is a distinction between contexts created by the user, and the default HW context. The default HW context is used by GPU clients that do not request setup of their own hardware context. The default context's state is never restored to help prevent programming errors. This would happen if a client ran and piggy-backed off another clients GPU state. The default context only exists to give the GPU some offset to load as the current to invoke a save of the context we actually care about. In fact, the code could likely be constructed, albeit in a more complicated fashion, to never use the default context, though that limits the driver's ability to swap out, and/or destroy other contexts. All other contexts are created as a request by the GPU client. These contexts store GPU state, and thus allow GPU clients to not re-emit state (and potentially query certain state) at any time. The kernel driver makes certain that the appropriate commands are inserted. There are 4 entry points into the contexts, init, fini, open, close. The names are self-explanatory except that init can be called during reset, and also during pm thaw/resume. As we expect our context to be preserved across these events, we do not reinitialize in this case. As Adam Jackson pointed out, The cutoff of 1MB where a HW context is considered too big is arbitrary. The reason for this is even though context sizes are increasing with every generation, they have yet to eclipse even 32k. If we somehow read back way more than that, it probably means BIOS has done something strange, or we're running on a platform that wasn't designed for this. v2: rename load/unload to init/fini (daniel) remove ILK support for get_size() (indirectly daniel) add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel) added comments (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-05 04:42:42 +07:00
{
struct drm_i915_file_private *file_priv = file->driver_priv;
drm/i915: preliminary context support Very basic code for context setup/destruction in the driver. Adds the file i915_gem_context.c This file implements HW context support. On gen5+ a HW context consists of an opaque GPU object which is referenced at times of context saves and restores. With RC6 enabled, the context is also referenced as the GPU enters and exists from RC6 (GPU has it's own internal power context, except on gen5). Though something like a context does exist for the media ring, the code only supports contexts for the render ring. In software, there is a distinction between contexts created by the user, and the default HW context. The default HW context is used by GPU clients that do not request setup of their own hardware context. The default context's state is never restored to help prevent programming errors. This would happen if a client ran and piggy-backed off another clients GPU state. The default context only exists to give the GPU some offset to load as the current to invoke a save of the context we actually care about. In fact, the code could likely be constructed, albeit in a more complicated fashion, to never use the default context, though that limits the driver's ability to swap out, and/or destroy other contexts. All other contexts are created as a request by the GPU client. These contexts store GPU state, and thus allow GPU clients to not re-emit state (and potentially query certain state) at any time. The kernel driver makes certain that the appropriate commands are inserted. There are 4 entry points into the contexts, init, fini, open, close. The names are self-explanatory except that init can be called during reset, and also during pm thaw/resume. As we expect our context to be preserved across these events, we do not reinitialize in this case. As Adam Jackson pointed out, The cutoff of 1MB where a HW context is considered too big is arbitrary. The reason for this is even though context sizes are increasing with every generation, they have yet to eclipse even 32k. If we somehow read back way more than that, it probably means BIOS has done something strange, or we're running on a platform that wasn't designed for this. v2: rename load/unload to init/fini (daniel) remove ILK support for get_size() (indirectly daniel) add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel) added comments (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-05 04:42:42 +07:00
lockdep_assert_held(&file_priv->dev_priv->drm.struct_mutex);
idr_for_each(&file_priv->context_idr, context_idr_cleanup, NULL);
idr_destroy(&file_priv->context_idr);
}
static struct i915_request *
last_request_on_engine(struct i915_timeline *timeline,
struct intel_engine_cs *engine)
{
struct i915_request *rq;
2018-05-24 15:11:35 +07:00
GEM_BUG_ON(timeline == &engine->timeline);
rq = i915_active_request_raw(&timeline->last_request,
&engine->i915->drm.struct_mutex);
2018-05-24 15:11:35 +07:00
if (rq && rq->engine == engine) {
GEM_TRACE("last request for %s on engine %s: %llx:%llu\n",
2018-05-24 15:11:35 +07:00
timeline->name, engine->name,
rq->fence.context, rq->fence.seqno);
GEM_BUG_ON(rq->timeline != timeline);
return rq;
2018-05-24 15:11:35 +07:00
}
return NULL;
}
2018-05-24 15:11:35 +07:00
static bool engine_has_kernel_context_barrier(struct intel_engine_cs *engine)
{
2018-05-24 15:11:35 +07:00
struct drm_i915_private *i915 = engine->i915;
const struct intel_context * const ce =
to_intel_context(i915->kernel_context, engine);
struct i915_timeline *barrier = ce->ring->timeline;
struct intel_ring *ring;
2018-05-24 15:11:35 +07:00
bool any_active = false;
2018-05-24 15:11:35 +07:00
lockdep_assert_held(&i915->drm.struct_mutex);
list_for_each_entry(ring, &i915->gt.active_rings, active_link) {
struct i915_request *rq;
rq = last_request_on_engine(ring->timeline, engine);
if (!rq)
continue;
2018-05-24 15:11:35 +07:00
any_active = true;
if (rq->hw_context == ce)
2018-05-24 15:11:35 +07:00
continue;
/*
* Was this request submitted after the previous
* switch-to-kernel-context?
*/
if (!i915_timeline_sync_is_later(barrier, &rq->fence)) {
GEM_TRACE("%s needs barrier for %llx:%lld\n",
2018-05-24 15:11:35 +07:00
ring->timeline->name,
rq->fence.context,
rq->fence.seqno);
return false;
2018-05-24 15:11:35 +07:00
}
GEM_TRACE("%s has barrier after %llx:%lld\n",
2018-05-24 15:11:35 +07:00
ring->timeline->name,
rq->fence.context,
rq->fence.seqno);
}
2018-05-24 15:11:35 +07:00
/*
* If any other timeline was still active and behind the last barrier,
* then our last switch-to-kernel-context must still be queued and
* will run last (leaving the engine in the kernel context when it
* eventually idles).
*/
if (any_active)
return true;
/* The engine is idle; check that it is idling in the kernel context. */
return engine->last_retired_context == ce;
}
int i915_gem_switch_to_kernel_context(struct drm_i915_private *i915)
{
struct intel_engine_cs *engine;
drm/i915: Allocate intel_engine_cs structure only for the enabled engines With the possibility of addition of many more number of rings in future, the drm_i915_private structure could bloat as an array, of type intel_engine_cs, is embedded inside it. struct intel_engine_cs engine[I915_NUM_ENGINES]; Though this is still fine as generally there is only a single instance of drm_i915_private structure used, but not all of the possible rings would be enabled or active on most of the platforms. Some memory can be saved by allocating intel_engine_cs structure only for the enabled/active engines. Currently the engine/ring ID is kept static and dev_priv->engine[] is simply indexed using the enums defined in intel_engine_id. To save memory and continue using the static engine/ring IDs, 'engine' is defined as an array of pointers. struct intel_engine_cs *engine[I915_NUM_ENGINES]; dev_priv->engine[engine_ID] will be NULL for disabled engine instances. There is a text size reduction of 928 bytes, from 1028200 to 1027272, for i915.o file (but for i915.ko file text size remain same as 1193131 bytes). v2: - Remove the engine iterator field added in drm_i915_private structure, instead pass a local iterator variable to the for_each_engine** macros. (Chris) - Do away with intel_engine_initialized() and instead directly use the NULL pointer check on engine pointer. (Chris) v3: - Remove for_each_engine_id() macro, as the updated macro for_each_engine() can be used in place of it. (Chris) - Protect the access to Render engine Fault register with a NULL check, as engine specific init is done later in Driver load sequence. v4: - Use !!dev_priv->engine[VCS] style for the engine check in getparam. (Chris) - Kill the superfluous init_engine_lists(). v5: - Cleanup the intel_engines_init() & intel_engines_setup(), with respect to allocation of intel_engine_cs structure. (Chris) v6: - Rebase. v7: - Optimize the for_each_engine_masked() macro. (Chris) - Change the type of 'iter' local variable to enum intel_engine_id. (Chris) - Rebase. v8: Rebase. v9: Rebase. v10: - For index calculation use engine ID instead of pointer based arithmetic in intel_engine_sync_index() as engine pointers are not contiguous now (Chris) - For appropriateness, rename local enum variable 'iter' to 'id'. (Joonas) - Use for_each_engine macro for cleanup in intel_engines_init() and remove check for NULL engine pointer in cleanup() routines. (Joonas) v11: Rebase. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Akash Goel <akash.goel@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476378888-7372-1-git-send-email-akash.goel@intel.com
2016-10-14 00:14:48 +07:00
enum intel_engine_id id;
GEM_TRACE("awake?=%s\n", yesno(i915->gt.awake));
2018-05-24 15:11:35 +07:00
lockdep_assert_held(&i915->drm.struct_mutex);
2018-05-24 15:11:35 +07:00
GEM_BUG_ON(!i915->kernel_context);
i915_retire_requests(i915);
for_each_engine(engine, i915, id) {
struct intel_ring *ring;
struct i915_request *rq;
2018-05-24 15:11:35 +07:00
GEM_BUG_ON(!to_intel_context(i915->kernel_context, engine));
if (engine_has_kernel_context_barrier(engine))
continue;
2018-05-24 15:11:35 +07:00
GEM_TRACE("emit barrier on %s\n", engine->name);
rq = i915_request_alloc(engine, i915->kernel_context);
if (IS_ERR(rq))
return PTR_ERR(rq);
/* Queue this switch after all other activity */
list_for_each_entry(ring, &i915->gt.active_rings, active_link) {
struct i915_request *prev;
prev = last_request_on_engine(ring->timeline, engine);
2018-05-24 15:11:35 +07:00
if (!prev)
continue;
if (prev->gem_context == i915->kernel_context)
continue;
GEM_TRACE("add barrier on %s for %llx:%lld\n",
2018-05-24 15:11:35 +07:00
engine->name,
prev->fence.context,
prev->fence.seqno);
i915_sw_fence_await_sw_fence_gfp(&rq->submit,
&prev->submit,
I915_FENCE_GFP);
i915_timeline_sync_set(rq->timeline, &prev->fence);
}
i915_request_add(rq);
}
return 0;
}
static bool client_is_banned(struct drm_i915_file_private *file_priv)
{
return atomic_read(&file_priv->ban_score) >= I915_CLIENT_SCORE_BANNED;
}
int i915_gem_context_create_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_private *dev_priv = to_i915(dev);
struct drm_i915_gem_context_create *args = data;
struct drm_i915_file_private *file_priv = file->driver_priv;
struct i915_gem_context *ctx;
int ret;
if (!DRIVER_CAPS(dev_priv)->has_logical_contexts)
return -ENODEV;
if (args->pad != 0)
return -EINVAL;
if (client_is_banned(file_priv)) {
DRM_DEBUG("client %s[%d] banned from creating ctx\n",
current->comm,
pid_nr(get_task_pid(current, PIDTYPE_PID)));
return -EIO;
}
ret = i915_mutex_lock_interruptible(dev);
if (ret)
return ret;
ctx = i915_gem_create_context(dev_priv, file_priv);
mutex_unlock(&dev->struct_mutex);
if (IS_ERR(ctx))
return PTR_ERR(ctx);
GEM_BUG_ON(i915_gem_context_is_kernel(ctx));
drm/i915: Emphasize that ctx->id is merely a user handle This is an Execlists preparatory patch, since they make context ID become an overloaded term: - In the software, it was used to distinguish which context userspace was trying to use. - In the BSpec, the term is used to describe the 20-bits long field the hardware uses to it to discriminate the contexts that are submitted to the ELSP and inform the driver about their current status (via Context Switch Interrupts and Context Status Buffers). Initially, I tried to make the different meanings converge, but it proved impossible: - The software ctx->id is per-filp, while the hardware one needs to be globally unique. - Also, we multiplex several backing states objects per intel_context, and all of them need unique HW IDs. - I tried adding a per-filp ID and then composing the HW context ID as: ctx->id + file_priv->id + ring->id, but the fact that the hardware only uses 20-bits means we have to artificially limit the number of filps or contexts the userspace can create. The ctx->user_handle renaming bits are done with this Cocci patch (plus manual frobbing of the struct declaration): @@ struct intel_context c; @@ - (c).id + c.user_handle @@ struct intel_context *c; @@ - (c)->id + c->user_handle Also, while we are at it, s/DEFAULT_CONTEXT_ID/DEFAULT_CONTEXT_HANDLE and change the type to unsigned 32 bits. v2: s/handle/user_handle and change the type to uint32_t as suggested by Chris Wilson. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v1) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-03 22:28:00 +07:00
args->ctx_id = ctx->user_handle;
DRM_DEBUG("HW context %d created\n", args->ctx_id);
return 0;
}
int i915_gem_context_destroy_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_gem_context_destroy *args = data;
struct drm_i915_file_private *file_priv = file->driver_priv;
struct i915_gem_context *ctx;
int ret;
if (args->pad != 0)
return -EINVAL;
drm/i915: Emphasize that ctx->id is merely a user handle This is an Execlists preparatory patch, since they make context ID become an overloaded term: - In the software, it was used to distinguish which context userspace was trying to use. - In the BSpec, the term is used to describe the 20-bits long field the hardware uses to it to discriminate the contexts that are submitted to the ELSP and inform the driver about their current status (via Context Switch Interrupts and Context Status Buffers). Initially, I tried to make the different meanings converge, but it proved impossible: - The software ctx->id is per-filp, while the hardware one needs to be globally unique. - Also, we multiplex several backing states objects per intel_context, and all of them need unique HW IDs. - I tried adding a per-filp ID and then composing the HW context ID as: ctx->id + file_priv->id + ring->id, but the fact that the hardware only uses 20-bits means we have to artificially limit the number of filps or contexts the userspace can create. The ctx->user_handle renaming bits are done with this Cocci patch (plus manual frobbing of the struct declaration): @@ struct intel_context c; @@ - (c).id + c.user_handle @@ struct intel_context *c; @@ - (c)->id + c->user_handle Also, while we are at it, s/DEFAULT_CONTEXT_ID/DEFAULT_CONTEXT_HANDLE and change the type to unsigned 32 bits. v2: s/handle/user_handle and change the type to uint32_t as suggested by Chris Wilson. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v1) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-03 22:28:00 +07:00
if (args->ctx_id == DEFAULT_CONTEXT_HANDLE)
return -ENOENT;
ctx = i915_gem_context_lookup(file_priv, args->ctx_id);
if (!ctx)
return -ENOENT;
ret = mutex_lock_interruptible(&dev->struct_mutex);
if (ret)
goto out;
__destroy_hw_context(ctx, file_priv);
mutex_unlock(&dev->struct_mutex);
out:
i915_gem_context_put(ctx);
return 0;
}
drm/i915: Expose RPCS (SSEU) configuration to userspace (Gen11 only) We want to allow userspace to reconfigure the subslice configuration on a per context basis. This is required for the functional requirement of shutting down non-VME enabled sub-slices on Gen11 parts. To do so, we expose a context parameter to allow adjustment of the RPCS register stored within the context image (and currently not accessible via LRI). If the context is adjusted before first use or whilst idle, the adjustment is for "free"; otherwise if the context is active we queue a request to do so (using the kernel context), following all other activity by that context, which is also marked as barrier for all following submission against the same context. Since the overhead of device re-configuration during context switching can be significant, especially in multi-context workloads, we limit this new uAPI to only support the Gen11 VME use case. In this use case either the device is fully enabled, and exactly one slice and half of the subslices are enabled. Example usage: struct drm_i915_gem_context_param_sseu sseu = { }; struct drm_i915_gem_context_param arg = { .param = I915_CONTEXT_PARAM_SSEU, .ctx_id = gem_context_create(fd), .size = sizeof(sseu), .value = to_user_pointer(&sseu) }; /* Query device defaults. */ gem_context_get_param(fd, &arg); /* Set VME configuration on a 1x6x8 part. */ sseu.slice_mask = 0x1; sseu.subslice_mask = 0xe0; gem_context_set_param(fd, &arg); v2: Fix offset of CTX_R_PWR_CLK_STATE in intel_lr_context_set_sseu() (Lionel) v3: Add ability to program this per engine (Chris) v4: Move most get_sseu() into i915_gem_context.c (Lionel) v5: Validate sseu configuration against the device's capabilities (Lionel) v6: Change context powergating settings through MI_SDM on kernel context (Chris) v7: Synchronize the requests following a powergating setting change using a global dependency (Chris) Iterate timelines through dev_priv.gt.active_rings (Tvrtko) Disable RPCS configuration setting for non capable users (Lionel/Tvrtko) v8: s/union intel_sseu/struct intel_sseu/ (Lionel) s/dev_priv/i915/ (Tvrtko) Change uapi class/instance fields to u16 (Tvrtko) Bump mask fields to 64bits (Lionel) Don't return EPERM when dynamic sseu is disabled (Tvrtko) v9: Import context image into kernel context's ppgtt only when reconfiguring powergated slice/subslices (Chris) Use aliasing ppgtt when needed (Michel) Tvrtko Ursulin: v10: * Update for upstream changes. * Request submit needs a RPM reference. * Reject on !FULL_PPGTT for simplicity. * Pull out get/set param to helpers for readability and less indent. * Use i915_request_await_dma_fence in add_global_barrier to skip waits on the same timeline and avoid GEM_BUG_ON. * No need to explicitly assign a NULL pointer to engine in legacy mode. * No need to move gen8_make_rpcs up. * Factored out global barrier as prep patch. * Allow to only CAP_SYS_ADMIN if !Gen11. v11: * Remove engine vfunc in favour of local helper. (Chris Wilson) * Stop retiring requests before updates since it is not needed (Chris Wilson) * Implement direct CPU update path for idle contexts. (Chris Wilson) * Left side dependency needs only be on the same context timeline. (Chris Wilson) * It is sufficient to order the timeline. (Chris Wilson) * Reject !RCS configuration attempts with -ENODEV for now. v12: * Rebase for make_rpcs. v13: * Centralize SSEU normalization to make_rpcs. * Type width checking (uAPI <-> implementation). * Gen11 restrictions uAPI checks. * Gen11 subslice count differences handling. Chris Wilson: * args->size handling fixes. * Update context image from GGTT. * Postpone context image update to pinning. * Use i915_gem_active_raw instead of last_request_on_engine. v14: * Add activity tracker on intel_context to fix the lifetime issues and simplify the code. (Chris Wilson) v15: * Fix context pin leak if no space in ring by simplifying the context pinning sequence. v16: * Rebase for context get/set param locking changes. * Just -ENODEV on !Gen11. (Joonas) v17: * Fix one Gen11 subslice enablement rule. * Handle error from i915_sw_fence_await_sw_fence_gfp. (Chris Wilson) v18: * Update commit message. (Joonas) * Restrict uAPI to VME use case. (Joonas) v19: * Rebase. v20: * Rebase for ce->active_tracker. v21: * Rebase for IS_GEN changes. v22: * Reserve uAPI for flags straight away. (Chris Wilson) v23: * Rebase for RUNTIME_INFO. v24: * Added some headline docs for the uapi usage. (Joonas/Chris) v25: * Renamed class/instance to engine_class/engine_instance to avoid clash with C++ keyword. (Tony Ye) v26: * Rebased for runtime pm api changes. v27: * Rebased for intel_context_init. * Wrap commit msg to 75. v28: (Chris Wilson) * Use i915_gem_ggtt. * Use i915_request_await_dma_fence to show a better example. v29: * i915_timeline_set_barrier can now fail. (Chris Wilson) v30: * Capture some acks. v31: * Drop the WARN_ON from use controllable paths. (Chris Wilson) * Use overflows_type for all checks. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100899 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107634 Issue: https://github.com/intel/media-driver/issues/267 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Zhipeng Gong <zhipeng.gong@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tony Ye <tony.ye@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Timo Aaltonen <timo.aaltonen@canonical.com> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Stéphane Marchesin <marcheu@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-4-tvrtko.ursulin@linux.intel.com
2019-02-05 16:50:31 +07:00
static int get_sseu(struct i915_gem_context *ctx,
struct drm_i915_gem_context_param *args)
{
struct drm_i915_gem_context_param_sseu user_sseu;
struct intel_engine_cs *engine;
struct intel_context *ce;
int ret;
if (args->size == 0)
goto out;
else if (args->size < sizeof(user_sseu))
return -EINVAL;
if (copy_from_user(&user_sseu, u64_to_user_ptr(args->value),
sizeof(user_sseu)))
return -EFAULT;
if (user_sseu.flags || user_sseu.rsvd)
return -EINVAL;
engine = intel_engine_lookup_user(ctx->i915,
user_sseu.engine_class,
user_sseu.engine_instance);
if (!engine)
return -EINVAL;
/* Only use for mutex here is to serialize get_param and set_param. */
ret = mutex_lock_interruptible(&ctx->i915->drm.struct_mutex);
if (ret)
return ret;
ce = to_intel_context(ctx, engine);
user_sseu.slice_mask = ce->sseu.slice_mask;
user_sseu.subslice_mask = ce->sseu.subslice_mask;
user_sseu.min_eus_per_subslice = ce->sseu.min_eus_per_subslice;
user_sseu.max_eus_per_subslice = ce->sseu.max_eus_per_subslice;
mutex_unlock(&ctx->i915->drm.struct_mutex);
if (copy_to_user(u64_to_user_ptr(args->value), &user_sseu,
sizeof(user_sseu)))
return -EFAULT;
out:
args->size = sizeof(user_sseu);
return 0;
}
int i915_gem_context_getparam_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_file_private *file_priv = file->driver_priv;
struct drm_i915_gem_context_param *args = data;
struct i915_gem_context *ctx;
int ret = 0;
ctx = i915_gem_context_lookup(file_priv, args->ctx_id);
if (!ctx)
return -ENOENT;
switch (args->param) {
case I915_CONTEXT_PARAM_BAN_PERIOD:
ret = -EINVAL;
break;
case I915_CONTEXT_PARAM_NO_ZEROMAP:
drm/i915: Expose RPCS (SSEU) configuration to userspace (Gen11 only) We want to allow userspace to reconfigure the subslice configuration on a per context basis. This is required for the functional requirement of shutting down non-VME enabled sub-slices on Gen11 parts. To do so, we expose a context parameter to allow adjustment of the RPCS register stored within the context image (and currently not accessible via LRI). If the context is adjusted before first use or whilst idle, the adjustment is for "free"; otherwise if the context is active we queue a request to do so (using the kernel context), following all other activity by that context, which is also marked as barrier for all following submission against the same context. Since the overhead of device re-configuration during context switching can be significant, especially in multi-context workloads, we limit this new uAPI to only support the Gen11 VME use case. In this use case either the device is fully enabled, and exactly one slice and half of the subslices are enabled. Example usage: struct drm_i915_gem_context_param_sseu sseu = { }; struct drm_i915_gem_context_param arg = { .param = I915_CONTEXT_PARAM_SSEU, .ctx_id = gem_context_create(fd), .size = sizeof(sseu), .value = to_user_pointer(&sseu) }; /* Query device defaults. */ gem_context_get_param(fd, &arg); /* Set VME configuration on a 1x6x8 part. */ sseu.slice_mask = 0x1; sseu.subslice_mask = 0xe0; gem_context_set_param(fd, &arg); v2: Fix offset of CTX_R_PWR_CLK_STATE in intel_lr_context_set_sseu() (Lionel) v3: Add ability to program this per engine (Chris) v4: Move most get_sseu() into i915_gem_context.c (Lionel) v5: Validate sseu configuration against the device's capabilities (Lionel) v6: Change context powergating settings through MI_SDM on kernel context (Chris) v7: Synchronize the requests following a powergating setting change using a global dependency (Chris) Iterate timelines through dev_priv.gt.active_rings (Tvrtko) Disable RPCS configuration setting for non capable users (Lionel/Tvrtko) v8: s/union intel_sseu/struct intel_sseu/ (Lionel) s/dev_priv/i915/ (Tvrtko) Change uapi class/instance fields to u16 (Tvrtko) Bump mask fields to 64bits (Lionel) Don't return EPERM when dynamic sseu is disabled (Tvrtko) v9: Import context image into kernel context's ppgtt only when reconfiguring powergated slice/subslices (Chris) Use aliasing ppgtt when needed (Michel) Tvrtko Ursulin: v10: * Update for upstream changes. * Request submit needs a RPM reference. * Reject on !FULL_PPGTT for simplicity. * Pull out get/set param to helpers for readability and less indent. * Use i915_request_await_dma_fence in add_global_barrier to skip waits on the same timeline and avoid GEM_BUG_ON. * No need to explicitly assign a NULL pointer to engine in legacy mode. * No need to move gen8_make_rpcs up. * Factored out global barrier as prep patch. * Allow to only CAP_SYS_ADMIN if !Gen11. v11: * Remove engine vfunc in favour of local helper. (Chris Wilson) * Stop retiring requests before updates since it is not needed (Chris Wilson) * Implement direct CPU update path for idle contexts. (Chris Wilson) * Left side dependency needs only be on the same context timeline. (Chris Wilson) * It is sufficient to order the timeline. (Chris Wilson) * Reject !RCS configuration attempts with -ENODEV for now. v12: * Rebase for make_rpcs. v13: * Centralize SSEU normalization to make_rpcs. * Type width checking (uAPI <-> implementation). * Gen11 restrictions uAPI checks. * Gen11 subslice count differences handling. Chris Wilson: * args->size handling fixes. * Update context image from GGTT. * Postpone context image update to pinning. * Use i915_gem_active_raw instead of last_request_on_engine. v14: * Add activity tracker on intel_context to fix the lifetime issues and simplify the code. (Chris Wilson) v15: * Fix context pin leak if no space in ring by simplifying the context pinning sequence. v16: * Rebase for context get/set param locking changes. * Just -ENODEV on !Gen11. (Joonas) v17: * Fix one Gen11 subslice enablement rule. * Handle error from i915_sw_fence_await_sw_fence_gfp. (Chris Wilson) v18: * Update commit message. (Joonas) * Restrict uAPI to VME use case. (Joonas) v19: * Rebase. v20: * Rebase for ce->active_tracker. v21: * Rebase for IS_GEN changes. v22: * Reserve uAPI for flags straight away. (Chris Wilson) v23: * Rebase for RUNTIME_INFO. v24: * Added some headline docs for the uapi usage. (Joonas/Chris) v25: * Renamed class/instance to engine_class/engine_instance to avoid clash with C++ keyword. (Tony Ye) v26: * Rebased for runtime pm api changes. v27: * Rebased for intel_context_init. * Wrap commit msg to 75. v28: (Chris Wilson) * Use i915_gem_ggtt. * Use i915_request_await_dma_fence to show a better example. v29: * i915_timeline_set_barrier can now fail. (Chris Wilson) v30: * Capture some acks. v31: * Drop the WARN_ON from use controllable paths. (Chris Wilson) * Use overflows_type for all checks. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100899 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107634 Issue: https://github.com/intel/media-driver/issues/267 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Zhipeng Gong <zhipeng.gong@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tony Ye <tony.ye@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Timo Aaltonen <timo.aaltonen@canonical.com> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Stéphane Marchesin <marcheu@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-4-tvrtko.ursulin@linux.intel.com
2019-02-05 16:50:31 +07:00
args->size = 0;
args->value = test_bit(UCONTEXT_NO_ZEROMAP, &ctx->user_flags);
break;
case I915_CONTEXT_PARAM_GTT_SIZE:
drm/i915: Expose RPCS (SSEU) configuration to userspace (Gen11 only) We want to allow userspace to reconfigure the subslice configuration on a per context basis. This is required for the functional requirement of shutting down non-VME enabled sub-slices on Gen11 parts. To do so, we expose a context parameter to allow adjustment of the RPCS register stored within the context image (and currently not accessible via LRI). If the context is adjusted before first use or whilst idle, the adjustment is for "free"; otherwise if the context is active we queue a request to do so (using the kernel context), following all other activity by that context, which is also marked as barrier for all following submission against the same context. Since the overhead of device re-configuration during context switching can be significant, especially in multi-context workloads, we limit this new uAPI to only support the Gen11 VME use case. In this use case either the device is fully enabled, and exactly one slice and half of the subslices are enabled. Example usage: struct drm_i915_gem_context_param_sseu sseu = { }; struct drm_i915_gem_context_param arg = { .param = I915_CONTEXT_PARAM_SSEU, .ctx_id = gem_context_create(fd), .size = sizeof(sseu), .value = to_user_pointer(&sseu) }; /* Query device defaults. */ gem_context_get_param(fd, &arg); /* Set VME configuration on a 1x6x8 part. */ sseu.slice_mask = 0x1; sseu.subslice_mask = 0xe0; gem_context_set_param(fd, &arg); v2: Fix offset of CTX_R_PWR_CLK_STATE in intel_lr_context_set_sseu() (Lionel) v3: Add ability to program this per engine (Chris) v4: Move most get_sseu() into i915_gem_context.c (Lionel) v5: Validate sseu configuration against the device's capabilities (Lionel) v6: Change context powergating settings through MI_SDM on kernel context (Chris) v7: Synchronize the requests following a powergating setting change using a global dependency (Chris) Iterate timelines through dev_priv.gt.active_rings (Tvrtko) Disable RPCS configuration setting for non capable users (Lionel/Tvrtko) v8: s/union intel_sseu/struct intel_sseu/ (Lionel) s/dev_priv/i915/ (Tvrtko) Change uapi class/instance fields to u16 (Tvrtko) Bump mask fields to 64bits (Lionel) Don't return EPERM when dynamic sseu is disabled (Tvrtko) v9: Import context image into kernel context's ppgtt only when reconfiguring powergated slice/subslices (Chris) Use aliasing ppgtt when needed (Michel) Tvrtko Ursulin: v10: * Update for upstream changes. * Request submit needs a RPM reference. * Reject on !FULL_PPGTT for simplicity. * Pull out get/set param to helpers for readability and less indent. * Use i915_request_await_dma_fence in add_global_barrier to skip waits on the same timeline and avoid GEM_BUG_ON. * No need to explicitly assign a NULL pointer to engine in legacy mode. * No need to move gen8_make_rpcs up. * Factored out global barrier as prep patch. * Allow to only CAP_SYS_ADMIN if !Gen11. v11: * Remove engine vfunc in favour of local helper. (Chris Wilson) * Stop retiring requests before updates since it is not needed (Chris Wilson) * Implement direct CPU update path for idle contexts. (Chris Wilson) * Left side dependency needs only be on the same context timeline. (Chris Wilson) * It is sufficient to order the timeline. (Chris Wilson) * Reject !RCS configuration attempts with -ENODEV for now. v12: * Rebase for make_rpcs. v13: * Centralize SSEU normalization to make_rpcs. * Type width checking (uAPI <-> implementation). * Gen11 restrictions uAPI checks. * Gen11 subslice count differences handling. Chris Wilson: * args->size handling fixes. * Update context image from GGTT. * Postpone context image update to pinning. * Use i915_gem_active_raw instead of last_request_on_engine. v14: * Add activity tracker on intel_context to fix the lifetime issues and simplify the code. (Chris Wilson) v15: * Fix context pin leak if no space in ring by simplifying the context pinning sequence. v16: * Rebase for context get/set param locking changes. * Just -ENODEV on !Gen11. (Joonas) v17: * Fix one Gen11 subslice enablement rule. * Handle error from i915_sw_fence_await_sw_fence_gfp. (Chris Wilson) v18: * Update commit message. (Joonas) * Restrict uAPI to VME use case. (Joonas) v19: * Rebase. v20: * Rebase for ce->active_tracker. v21: * Rebase for IS_GEN changes. v22: * Reserve uAPI for flags straight away. (Chris Wilson) v23: * Rebase for RUNTIME_INFO. v24: * Added some headline docs for the uapi usage. (Joonas/Chris) v25: * Renamed class/instance to engine_class/engine_instance to avoid clash with C++ keyword. (Tony Ye) v26: * Rebased for runtime pm api changes. v27: * Rebased for intel_context_init. * Wrap commit msg to 75. v28: (Chris Wilson) * Use i915_gem_ggtt. * Use i915_request_await_dma_fence to show a better example. v29: * i915_timeline_set_barrier can now fail. (Chris Wilson) v30: * Capture some acks. v31: * Drop the WARN_ON from use controllable paths. (Chris Wilson) * Use overflows_type for all checks. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100899 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107634 Issue: https://github.com/intel/media-driver/issues/267 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Zhipeng Gong <zhipeng.gong@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tony Ye <tony.ye@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Timo Aaltonen <timo.aaltonen@canonical.com> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Stéphane Marchesin <marcheu@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-4-tvrtko.ursulin@linux.intel.com
2019-02-05 16:50:31 +07:00
args->size = 0;
if (ctx->ppgtt)
args->value = ctx->ppgtt->vm.total;
else if (to_i915(dev)->mm.aliasing_ppgtt)
args->value = to_i915(dev)->mm.aliasing_ppgtt->vm.total;
else
args->value = to_i915(dev)->ggtt.vm.total;
break;
case I915_CONTEXT_PARAM_NO_ERROR_CAPTURE:
drm/i915: Expose RPCS (SSEU) configuration to userspace (Gen11 only) We want to allow userspace to reconfigure the subslice configuration on a per context basis. This is required for the functional requirement of shutting down non-VME enabled sub-slices on Gen11 parts. To do so, we expose a context parameter to allow adjustment of the RPCS register stored within the context image (and currently not accessible via LRI). If the context is adjusted before first use or whilst idle, the adjustment is for "free"; otherwise if the context is active we queue a request to do so (using the kernel context), following all other activity by that context, which is also marked as barrier for all following submission against the same context. Since the overhead of device re-configuration during context switching can be significant, especially in multi-context workloads, we limit this new uAPI to only support the Gen11 VME use case. In this use case either the device is fully enabled, and exactly one slice and half of the subslices are enabled. Example usage: struct drm_i915_gem_context_param_sseu sseu = { }; struct drm_i915_gem_context_param arg = { .param = I915_CONTEXT_PARAM_SSEU, .ctx_id = gem_context_create(fd), .size = sizeof(sseu), .value = to_user_pointer(&sseu) }; /* Query device defaults. */ gem_context_get_param(fd, &arg); /* Set VME configuration on a 1x6x8 part. */ sseu.slice_mask = 0x1; sseu.subslice_mask = 0xe0; gem_context_set_param(fd, &arg); v2: Fix offset of CTX_R_PWR_CLK_STATE in intel_lr_context_set_sseu() (Lionel) v3: Add ability to program this per engine (Chris) v4: Move most get_sseu() into i915_gem_context.c (Lionel) v5: Validate sseu configuration against the device's capabilities (Lionel) v6: Change context powergating settings through MI_SDM on kernel context (Chris) v7: Synchronize the requests following a powergating setting change using a global dependency (Chris) Iterate timelines through dev_priv.gt.active_rings (Tvrtko) Disable RPCS configuration setting for non capable users (Lionel/Tvrtko) v8: s/union intel_sseu/struct intel_sseu/ (Lionel) s/dev_priv/i915/ (Tvrtko) Change uapi class/instance fields to u16 (Tvrtko) Bump mask fields to 64bits (Lionel) Don't return EPERM when dynamic sseu is disabled (Tvrtko) v9: Import context image into kernel context's ppgtt only when reconfiguring powergated slice/subslices (Chris) Use aliasing ppgtt when needed (Michel) Tvrtko Ursulin: v10: * Update for upstream changes. * Request submit needs a RPM reference. * Reject on !FULL_PPGTT for simplicity. * Pull out get/set param to helpers for readability and less indent. * Use i915_request_await_dma_fence in add_global_barrier to skip waits on the same timeline and avoid GEM_BUG_ON. * No need to explicitly assign a NULL pointer to engine in legacy mode. * No need to move gen8_make_rpcs up. * Factored out global barrier as prep patch. * Allow to only CAP_SYS_ADMIN if !Gen11. v11: * Remove engine vfunc in favour of local helper. (Chris Wilson) * Stop retiring requests before updates since it is not needed (Chris Wilson) * Implement direct CPU update path for idle contexts. (Chris Wilson) * Left side dependency needs only be on the same context timeline. (Chris Wilson) * It is sufficient to order the timeline. (Chris Wilson) * Reject !RCS configuration attempts with -ENODEV for now. v12: * Rebase for make_rpcs. v13: * Centralize SSEU normalization to make_rpcs. * Type width checking (uAPI <-> implementation). * Gen11 restrictions uAPI checks. * Gen11 subslice count differences handling. Chris Wilson: * args->size handling fixes. * Update context image from GGTT. * Postpone context image update to pinning. * Use i915_gem_active_raw instead of last_request_on_engine. v14: * Add activity tracker on intel_context to fix the lifetime issues and simplify the code. (Chris Wilson) v15: * Fix context pin leak if no space in ring by simplifying the context pinning sequence. v16: * Rebase for context get/set param locking changes. * Just -ENODEV on !Gen11. (Joonas) v17: * Fix one Gen11 subslice enablement rule. * Handle error from i915_sw_fence_await_sw_fence_gfp. (Chris Wilson) v18: * Update commit message. (Joonas) * Restrict uAPI to VME use case. (Joonas) v19: * Rebase. v20: * Rebase for ce->active_tracker. v21: * Rebase for IS_GEN changes. v22: * Reserve uAPI for flags straight away. (Chris Wilson) v23: * Rebase for RUNTIME_INFO. v24: * Added some headline docs for the uapi usage. (Joonas/Chris) v25: * Renamed class/instance to engine_class/engine_instance to avoid clash with C++ keyword. (Tony Ye) v26: * Rebased for runtime pm api changes. v27: * Rebased for intel_context_init. * Wrap commit msg to 75. v28: (Chris Wilson) * Use i915_gem_ggtt. * Use i915_request_await_dma_fence to show a better example. v29: * i915_timeline_set_barrier can now fail. (Chris Wilson) v30: * Capture some acks. v31: * Drop the WARN_ON from use controllable paths. (Chris Wilson) * Use overflows_type for all checks. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100899 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107634 Issue: https://github.com/intel/media-driver/issues/267 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Zhipeng Gong <zhipeng.gong@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tony Ye <tony.ye@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Timo Aaltonen <timo.aaltonen@canonical.com> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Stéphane Marchesin <marcheu@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-4-tvrtko.ursulin@linux.intel.com
2019-02-05 16:50:31 +07:00
args->size = 0;
args->value = i915_gem_context_no_error_capture(ctx);
break;
case I915_CONTEXT_PARAM_BANNABLE:
drm/i915: Expose RPCS (SSEU) configuration to userspace (Gen11 only) We want to allow userspace to reconfigure the subslice configuration on a per context basis. This is required for the functional requirement of shutting down non-VME enabled sub-slices on Gen11 parts. To do so, we expose a context parameter to allow adjustment of the RPCS register stored within the context image (and currently not accessible via LRI). If the context is adjusted before first use or whilst idle, the adjustment is for "free"; otherwise if the context is active we queue a request to do so (using the kernel context), following all other activity by that context, which is also marked as barrier for all following submission against the same context. Since the overhead of device re-configuration during context switching can be significant, especially in multi-context workloads, we limit this new uAPI to only support the Gen11 VME use case. In this use case either the device is fully enabled, and exactly one slice and half of the subslices are enabled. Example usage: struct drm_i915_gem_context_param_sseu sseu = { }; struct drm_i915_gem_context_param arg = { .param = I915_CONTEXT_PARAM_SSEU, .ctx_id = gem_context_create(fd), .size = sizeof(sseu), .value = to_user_pointer(&sseu) }; /* Query device defaults. */ gem_context_get_param(fd, &arg); /* Set VME configuration on a 1x6x8 part. */ sseu.slice_mask = 0x1; sseu.subslice_mask = 0xe0; gem_context_set_param(fd, &arg); v2: Fix offset of CTX_R_PWR_CLK_STATE in intel_lr_context_set_sseu() (Lionel) v3: Add ability to program this per engine (Chris) v4: Move most get_sseu() into i915_gem_context.c (Lionel) v5: Validate sseu configuration against the device's capabilities (Lionel) v6: Change context powergating settings through MI_SDM on kernel context (Chris) v7: Synchronize the requests following a powergating setting change using a global dependency (Chris) Iterate timelines through dev_priv.gt.active_rings (Tvrtko) Disable RPCS configuration setting for non capable users (Lionel/Tvrtko) v8: s/union intel_sseu/struct intel_sseu/ (Lionel) s/dev_priv/i915/ (Tvrtko) Change uapi class/instance fields to u16 (Tvrtko) Bump mask fields to 64bits (Lionel) Don't return EPERM when dynamic sseu is disabled (Tvrtko) v9: Import context image into kernel context's ppgtt only when reconfiguring powergated slice/subslices (Chris) Use aliasing ppgtt when needed (Michel) Tvrtko Ursulin: v10: * Update for upstream changes. * Request submit needs a RPM reference. * Reject on !FULL_PPGTT for simplicity. * Pull out get/set param to helpers for readability and less indent. * Use i915_request_await_dma_fence in add_global_barrier to skip waits on the same timeline and avoid GEM_BUG_ON. * No need to explicitly assign a NULL pointer to engine in legacy mode. * No need to move gen8_make_rpcs up. * Factored out global barrier as prep patch. * Allow to only CAP_SYS_ADMIN if !Gen11. v11: * Remove engine vfunc in favour of local helper. (Chris Wilson) * Stop retiring requests before updates since it is not needed (Chris Wilson) * Implement direct CPU update path for idle contexts. (Chris Wilson) * Left side dependency needs only be on the same context timeline. (Chris Wilson) * It is sufficient to order the timeline. (Chris Wilson) * Reject !RCS configuration attempts with -ENODEV for now. v12: * Rebase for make_rpcs. v13: * Centralize SSEU normalization to make_rpcs. * Type width checking (uAPI <-> implementation). * Gen11 restrictions uAPI checks. * Gen11 subslice count differences handling. Chris Wilson: * args->size handling fixes. * Update context image from GGTT. * Postpone context image update to pinning. * Use i915_gem_active_raw instead of last_request_on_engine. v14: * Add activity tracker on intel_context to fix the lifetime issues and simplify the code. (Chris Wilson) v15: * Fix context pin leak if no space in ring by simplifying the context pinning sequence. v16: * Rebase for context get/set param locking changes. * Just -ENODEV on !Gen11. (Joonas) v17: * Fix one Gen11 subslice enablement rule. * Handle error from i915_sw_fence_await_sw_fence_gfp. (Chris Wilson) v18: * Update commit message. (Joonas) * Restrict uAPI to VME use case. (Joonas) v19: * Rebase. v20: * Rebase for ce->active_tracker. v21: * Rebase for IS_GEN changes. v22: * Reserve uAPI for flags straight away. (Chris Wilson) v23: * Rebase for RUNTIME_INFO. v24: * Added some headline docs for the uapi usage. (Joonas/Chris) v25: * Renamed class/instance to engine_class/engine_instance to avoid clash with C++ keyword. (Tony Ye) v26: * Rebased for runtime pm api changes. v27: * Rebased for intel_context_init. * Wrap commit msg to 75. v28: (Chris Wilson) * Use i915_gem_ggtt. * Use i915_request_await_dma_fence to show a better example. v29: * i915_timeline_set_barrier can now fail. (Chris Wilson) v30: * Capture some acks. v31: * Drop the WARN_ON from use controllable paths. (Chris Wilson) * Use overflows_type for all checks. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100899 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107634 Issue: https://github.com/intel/media-driver/issues/267 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Zhipeng Gong <zhipeng.gong@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tony Ye <tony.ye@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Timo Aaltonen <timo.aaltonen@canonical.com> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Stéphane Marchesin <marcheu@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-4-tvrtko.ursulin@linux.intel.com
2019-02-05 16:50:31 +07:00
args->size = 0;
args->value = i915_gem_context_is_bannable(ctx);
break;
drm/i915/scheduler: Support user-defined priorities Use a priority stored in the context as the initial value when submitting a request. This allows us to change the default priority on a per-context basis, allowing different contexts to be favoured with GPU time at the expense of lower importance work. The user can adjust the context's priority via I915_CONTEXT_PARAM_PRIORITY, with more positive values being higher priority (they will be serviced earlier, after their dependencies have been resolved). Any prerequisite work for an execbuf will have its priority raised to match the new request as required. Normal users can specify any value in the range of -1023 to 0 [default], i.e. they can reduce the priority of their workloads (and temporarily boost it back to normal if so desired). Privileged users can specify any value in the range of -1023 to 1023, [default is 0], i.e. they can raise their priority above all overs and so potentially starve the system. Note that the existing schedulers are not fair, nor load balancing, the execution is strictly by priority on a first-come, first-served basis, and the driver may choose to boost some requests above the range available to users. This priority was originally based around nice(2), but evolved to allow clients to adjust their priority within a small range, and allow for a privileged high priority range. For example, this can be used to implement EGL_IMG_context_priority https://www.khronos.org/registry/egl/extensions/IMG/EGL_IMG_context_priority.txt EGL_CONTEXT_PRIORITY_LEVEL_IMG determines the priority level of the context to be created. This attribute is a hint, as an implementation may not support multiple contexts at some priority levels and system policy may limit access to high priority contexts to appropriate system privilege level. The default value for EGL_CONTEXT_PRIORITY_LEVEL_IMG is EGL_CONTEXT_PRIORITY_MEDIUM_IMG." so we can map PRIORITY_HIGH -> 1023 [privileged, will failback to 0] PRIORITY_MED -> 0 [default] PRIORITY_LOW -> -1023 They also map onto the priorities used by VkQueue (and a VkQueue is essentially a timeline, our i915_gem_context under full-ppgtt). v2: s/CAP_SYS_ADMIN/CAP_SYS_NICE/ v3: Report min/max user priorities as defines in the uapi, and rebase internal priorities on the exposed values. Testcase: igt/gem_exec_schedule Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-9-chris@chris-wilson.co.uk
2017-10-04 03:34:53 +07:00
case I915_CONTEXT_PARAM_PRIORITY:
drm/i915: Expose RPCS (SSEU) configuration to userspace (Gen11 only) We want to allow userspace to reconfigure the subslice configuration on a per context basis. This is required for the functional requirement of shutting down non-VME enabled sub-slices on Gen11 parts. To do so, we expose a context parameter to allow adjustment of the RPCS register stored within the context image (and currently not accessible via LRI). If the context is adjusted before first use or whilst idle, the adjustment is for "free"; otherwise if the context is active we queue a request to do so (using the kernel context), following all other activity by that context, which is also marked as barrier for all following submission against the same context. Since the overhead of device re-configuration during context switching can be significant, especially in multi-context workloads, we limit this new uAPI to only support the Gen11 VME use case. In this use case either the device is fully enabled, and exactly one slice and half of the subslices are enabled. Example usage: struct drm_i915_gem_context_param_sseu sseu = { }; struct drm_i915_gem_context_param arg = { .param = I915_CONTEXT_PARAM_SSEU, .ctx_id = gem_context_create(fd), .size = sizeof(sseu), .value = to_user_pointer(&sseu) }; /* Query device defaults. */ gem_context_get_param(fd, &arg); /* Set VME configuration on a 1x6x8 part. */ sseu.slice_mask = 0x1; sseu.subslice_mask = 0xe0; gem_context_set_param(fd, &arg); v2: Fix offset of CTX_R_PWR_CLK_STATE in intel_lr_context_set_sseu() (Lionel) v3: Add ability to program this per engine (Chris) v4: Move most get_sseu() into i915_gem_context.c (Lionel) v5: Validate sseu configuration against the device's capabilities (Lionel) v6: Change context powergating settings through MI_SDM on kernel context (Chris) v7: Synchronize the requests following a powergating setting change using a global dependency (Chris) Iterate timelines through dev_priv.gt.active_rings (Tvrtko) Disable RPCS configuration setting for non capable users (Lionel/Tvrtko) v8: s/union intel_sseu/struct intel_sseu/ (Lionel) s/dev_priv/i915/ (Tvrtko) Change uapi class/instance fields to u16 (Tvrtko) Bump mask fields to 64bits (Lionel) Don't return EPERM when dynamic sseu is disabled (Tvrtko) v9: Import context image into kernel context's ppgtt only when reconfiguring powergated slice/subslices (Chris) Use aliasing ppgtt when needed (Michel) Tvrtko Ursulin: v10: * Update for upstream changes. * Request submit needs a RPM reference. * Reject on !FULL_PPGTT for simplicity. * Pull out get/set param to helpers for readability and less indent. * Use i915_request_await_dma_fence in add_global_barrier to skip waits on the same timeline and avoid GEM_BUG_ON. * No need to explicitly assign a NULL pointer to engine in legacy mode. * No need to move gen8_make_rpcs up. * Factored out global barrier as prep patch. * Allow to only CAP_SYS_ADMIN if !Gen11. v11: * Remove engine vfunc in favour of local helper. (Chris Wilson) * Stop retiring requests before updates since it is not needed (Chris Wilson) * Implement direct CPU update path for idle contexts. (Chris Wilson) * Left side dependency needs only be on the same context timeline. (Chris Wilson) * It is sufficient to order the timeline. (Chris Wilson) * Reject !RCS configuration attempts with -ENODEV for now. v12: * Rebase for make_rpcs. v13: * Centralize SSEU normalization to make_rpcs. * Type width checking (uAPI <-> implementation). * Gen11 restrictions uAPI checks. * Gen11 subslice count differences handling. Chris Wilson: * args->size handling fixes. * Update context image from GGTT. * Postpone context image update to pinning. * Use i915_gem_active_raw instead of last_request_on_engine. v14: * Add activity tracker on intel_context to fix the lifetime issues and simplify the code. (Chris Wilson) v15: * Fix context pin leak if no space in ring by simplifying the context pinning sequence. v16: * Rebase for context get/set param locking changes. * Just -ENODEV on !Gen11. (Joonas) v17: * Fix one Gen11 subslice enablement rule. * Handle error from i915_sw_fence_await_sw_fence_gfp. (Chris Wilson) v18: * Update commit message. (Joonas) * Restrict uAPI to VME use case. (Joonas) v19: * Rebase. v20: * Rebase for ce->active_tracker. v21: * Rebase for IS_GEN changes. v22: * Reserve uAPI for flags straight away. (Chris Wilson) v23: * Rebase for RUNTIME_INFO. v24: * Added some headline docs for the uapi usage. (Joonas/Chris) v25: * Renamed class/instance to engine_class/engine_instance to avoid clash with C++ keyword. (Tony Ye) v26: * Rebased for runtime pm api changes. v27: * Rebased for intel_context_init. * Wrap commit msg to 75. v28: (Chris Wilson) * Use i915_gem_ggtt. * Use i915_request_await_dma_fence to show a better example. v29: * i915_timeline_set_barrier can now fail. (Chris Wilson) v30: * Capture some acks. v31: * Drop the WARN_ON from use controllable paths. (Chris Wilson) * Use overflows_type for all checks. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100899 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107634 Issue: https://github.com/intel/media-driver/issues/267 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Zhipeng Gong <zhipeng.gong@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tony Ye <tony.ye@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Timo Aaltonen <timo.aaltonen@canonical.com> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Stéphane Marchesin <marcheu@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-4-tvrtko.ursulin@linux.intel.com
2019-02-05 16:50:31 +07:00
args->size = 0;
args->value = ctx->sched.priority >> I915_USER_PRIORITY_SHIFT;
drm/i915/scheduler: Support user-defined priorities Use a priority stored in the context as the initial value when submitting a request. This allows us to change the default priority on a per-context basis, allowing different contexts to be favoured with GPU time at the expense of lower importance work. The user can adjust the context's priority via I915_CONTEXT_PARAM_PRIORITY, with more positive values being higher priority (they will be serviced earlier, after their dependencies have been resolved). Any prerequisite work for an execbuf will have its priority raised to match the new request as required. Normal users can specify any value in the range of -1023 to 0 [default], i.e. they can reduce the priority of their workloads (and temporarily boost it back to normal if so desired). Privileged users can specify any value in the range of -1023 to 1023, [default is 0], i.e. they can raise their priority above all overs and so potentially starve the system. Note that the existing schedulers are not fair, nor load balancing, the execution is strictly by priority on a first-come, first-served basis, and the driver may choose to boost some requests above the range available to users. This priority was originally based around nice(2), but evolved to allow clients to adjust their priority within a small range, and allow for a privileged high priority range. For example, this can be used to implement EGL_IMG_context_priority https://www.khronos.org/registry/egl/extensions/IMG/EGL_IMG_context_priority.txt EGL_CONTEXT_PRIORITY_LEVEL_IMG determines the priority level of the context to be created. This attribute is a hint, as an implementation may not support multiple contexts at some priority levels and system policy may limit access to high priority contexts to appropriate system privilege level. The default value for EGL_CONTEXT_PRIORITY_LEVEL_IMG is EGL_CONTEXT_PRIORITY_MEDIUM_IMG." so we can map PRIORITY_HIGH -> 1023 [privileged, will failback to 0] PRIORITY_MED -> 0 [default] PRIORITY_LOW -> -1023 They also map onto the priorities used by VkQueue (and a VkQueue is essentially a timeline, our i915_gem_context under full-ppgtt). v2: s/CAP_SYS_ADMIN/CAP_SYS_NICE/ v3: Report min/max user priorities as defines in the uapi, and rebase internal priorities on the exposed values. Testcase: igt/gem_exec_schedule Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-9-chris@chris-wilson.co.uk
2017-10-04 03:34:53 +07:00
break;
drm/i915: Expose RPCS (SSEU) configuration to userspace (Gen11 only) We want to allow userspace to reconfigure the subslice configuration on a per context basis. This is required for the functional requirement of shutting down non-VME enabled sub-slices on Gen11 parts. To do so, we expose a context parameter to allow adjustment of the RPCS register stored within the context image (and currently not accessible via LRI). If the context is adjusted before first use or whilst idle, the adjustment is for "free"; otherwise if the context is active we queue a request to do so (using the kernel context), following all other activity by that context, which is also marked as barrier for all following submission against the same context. Since the overhead of device re-configuration during context switching can be significant, especially in multi-context workloads, we limit this new uAPI to only support the Gen11 VME use case. In this use case either the device is fully enabled, and exactly one slice and half of the subslices are enabled. Example usage: struct drm_i915_gem_context_param_sseu sseu = { }; struct drm_i915_gem_context_param arg = { .param = I915_CONTEXT_PARAM_SSEU, .ctx_id = gem_context_create(fd), .size = sizeof(sseu), .value = to_user_pointer(&sseu) }; /* Query device defaults. */ gem_context_get_param(fd, &arg); /* Set VME configuration on a 1x6x8 part. */ sseu.slice_mask = 0x1; sseu.subslice_mask = 0xe0; gem_context_set_param(fd, &arg); v2: Fix offset of CTX_R_PWR_CLK_STATE in intel_lr_context_set_sseu() (Lionel) v3: Add ability to program this per engine (Chris) v4: Move most get_sseu() into i915_gem_context.c (Lionel) v5: Validate sseu configuration against the device's capabilities (Lionel) v6: Change context powergating settings through MI_SDM on kernel context (Chris) v7: Synchronize the requests following a powergating setting change using a global dependency (Chris) Iterate timelines through dev_priv.gt.active_rings (Tvrtko) Disable RPCS configuration setting for non capable users (Lionel/Tvrtko) v8: s/union intel_sseu/struct intel_sseu/ (Lionel) s/dev_priv/i915/ (Tvrtko) Change uapi class/instance fields to u16 (Tvrtko) Bump mask fields to 64bits (Lionel) Don't return EPERM when dynamic sseu is disabled (Tvrtko) v9: Import context image into kernel context's ppgtt only when reconfiguring powergated slice/subslices (Chris) Use aliasing ppgtt when needed (Michel) Tvrtko Ursulin: v10: * Update for upstream changes. * Request submit needs a RPM reference. * Reject on !FULL_PPGTT for simplicity. * Pull out get/set param to helpers for readability and less indent. * Use i915_request_await_dma_fence in add_global_barrier to skip waits on the same timeline and avoid GEM_BUG_ON. * No need to explicitly assign a NULL pointer to engine in legacy mode. * No need to move gen8_make_rpcs up. * Factored out global barrier as prep patch. * Allow to only CAP_SYS_ADMIN if !Gen11. v11: * Remove engine vfunc in favour of local helper. (Chris Wilson) * Stop retiring requests before updates since it is not needed (Chris Wilson) * Implement direct CPU update path for idle contexts. (Chris Wilson) * Left side dependency needs only be on the same context timeline. (Chris Wilson) * It is sufficient to order the timeline. (Chris Wilson) * Reject !RCS configuration attempts with -ENODEV for now. v12: * Rebase for make_rpcs. v13: * Centralize SSEU normalization to make_rpcs. * Type width checking (uAPI <-> implementation). * Gen11 restrictions uAPI checks. * Gen11 subslice count differences handling. Chris Wilson: * args->size handling fixes. * Update context image from GGTT. * Postpone context image update to pinning. * Use i915_gem_active_raw instead of last_request_on_engine. v14: * Add activity tracker on intel_context to fix the lifetime issues and simplify the code. (Chris Wilson) v15: * Fix context pin leak if no space in ring by simplifying the context pinning sequence. v16: * Rebase for context get/set param locking changes. * Just -ENODEV on !Gen11. (Joonas) v17: * Fix one Gen11 subslice enablement rule. * Handle error from i915_sw_fence_await_sw_fence_gfp. (Chris Wilson) v18: * Update commit message. (Joonas) * Restrict uAPI to VME use case. (Joonas) v19: * Rebase. v20: * Rebase for ce->active_tracker. v21: * Rebase for IS_GEN changes. v22: * Reserve uAPI for flags straight away. (Chris Wilson) v23: * Rebase for RUNTIME_INFO. v24: * Added some headline docs for the uapi usage. (Joonas/Chris) v25: * Renamed class/instance to engine_class/engine_instance to avoid clash with C++ keyword. (Tony Ye) v26: * Rebased for runtime pm api changes. v27: * Rebased for intel_context_init. * Wrap commit msg to 75. v28: (Chris Wilson) * Use i915_gem_ggtt. * Use i915_request_await_dma_fence to show a better example. v29: * i915_timeline_set_barrier can now fail. (Chris Wilson) v30: * Capture some acks. v31: * Drop the WARN_ON from use controllable paths. (Chris Wilson) * Use overflows_type for all checks. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100899 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107634 Issue: https://github.com/intel/media-driver/issues/267 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Zhipeng Gong <zhipeng.gong@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tony Ye <tony.ye@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Timo Aaltonen <timo.aaltonen@canonical.com> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Stéphane Marchesin <marcheu@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-4-tvrtko.ursulin@linux.intel.com
2019-02-05 16:50:31 +07:00
case I915_CONTEXT_PARAM_SSEU:
ret = get_sseu(ctx, args);
break;
default:
ret = -EINVAL;
break;
}
i915_gem_context_put(ctx);
return ret;
}
drm/i915: Expose RPCS (SSEU) configuration to userspace (Gen11 only) We want to allow userspace to reconfigure the subslice configuration on a per context basis. This is required for the functional requirement of shutting down non-VME enabled sub-slices on Gen11 parts. To do so, we expose a context parameter to allow adjustment of the RPCS register stored within the context image (and currently not accessible via LRI). If the context is adjusted before first use or whilst idle, the adjustment is for "free"; otherwise if the context is active we queue a request to do so (using the kernel context), following all other activity by that context, which is also marked as barrier for all following submission against the same context. Since the overhead of device re-configuration during context switching can be significant, especially in multi-context workloads, we limit this new uAPI to only support the Gen11 VME use case. In this use case either the device is fully enabled, and exactly one slice and half of the subslices are enabled. Example usage: struct drm_i915_gem_context_param_sseu sseu = { }; struct drm_i915_gem_context_param arg = { .param = I915_CONTEXT_PARAM_SSEU, .ctx_id = gem_context_create(fd), .size = sizeof(sseu), .value = to_user_pointer(&sseu) }; /* Query device defaults. */ gem_context_get_param(fd, &arg); /* Set VME configuration on a 1x6x8 part. */ sseu.slice_mask = 0x1; sseu.subslice_mask = 0xe0; gem_context_set_param(fd, &arg); v2: Fix offset of CTX_R_PWR_CLK_STATE in intel_lr_context_set_sseu() (Lionel) v3: Add ability to program this per engine (Chris) v4: Move most get_sseu() into i915_gem_context.c (Lionel) v5: Validate sseu configuration against the device's capabilities (Lionel) v6: Change context powergating settings through MI_SDM on kernel context (Chris) v7: Synchronize the requests following a powergating setting change using a global dependency (Chris) Iterate timelines through dev_priv.gt.active_rings (Tvrtko) Disable RPCS configuration setting for non capable users (Lionel/Tvrtko) v8: s/union intel_sseu/struct intel_sseu/ (Lionel) s/dev_priv/i915/ (Tvrtko) Change uapi class/instance fields to u16 (Tvrtko) Bump mask fields to 64bits (Lionel) Don't return EPERM when dynamic sseu is disabled (Tvrtko) v9: Import context image into kernel context's ppgtt only when reconfiguring powergated slice/subslices (Chris) Use aliasing ppgtt when needed (Michel) Tvrtko Ursulin: v10: * Update for upstream changes. * Request submit needs a RPM reference. * Reject on !FULL_PPGTT for simplicity. * Pull out get/set param to helpers for readability and less indent. * Use i915_request_await_dma_fence in add_global_barrier to skip waits on the same timeline and avoid GEM_BUG_ON. * No need to explicitly assign a NULL pointer to engine in legacy mode. * No need to move gen8_make_rpcs up. * Factored out global barrier as prep patch. * Allow to only CAP_SYS_ADMIN if !Gen11. v11: * Remove engine vfunc in favour of local helper. (Chris Wilson) * Stop retiring requests before updates since it is not needed (Chris Wilson) * Implement direct CPU update path for idle contexts. (Chris Wilson) * Left side dependency needs only be on the same context timeline. (Chris Wilson) * It is sufficient to order the timeline. (Chris Wilson) * Reject !RCS configuration attempts with -ENODEV for now. v12: * Rebase for make_rpcs. v13: * Centralize SSEU normalization to make_rpcs. * Type width checking (uAPI <-> implementation). * Gen11 restrictions uAPI checks. * Gen11 subslice count differences handling. Chris Wilson: * args->size handling fixes. * Update context image from GGTT. * Postpone context image update to pinning. * Use i915_gem_active_raw instead of last_request_on_engine. v14: * Add activity tracker on intel_context to fix the lifetime issues and simplify the code. (Chris Wilson) v15: * Fix context pin leak if no space in ring by simplifying the context pinning sequence. v16: * Rebase for context get/set param locking changes. * Just -ENODEV on !Gen11. (Joonas) v17: * Fix one Gen11 subslice enablement rule. * Handle error from i915_sw_fence_await_sw_fence_gfp. (Chris Wilson) v18: * Update commit message. (Joonas) * Restrict uAPI to VME use case. (Joonas) v19: * Rebase. v20: * Rebase for ce->active_tracker. v21: * Rebase for IS_GEN changes. v22: * Reserve uAPI for flags straight away. (Chris Wilson) v23: * Rebase for RUNTIME_INFO. v24: * Added some headline docs for the uapi usage. (Joonas/Chris) v25: * Renamed class/instance to engine_class/engine_instance to avoid clash with C++ keyword. (Tony Ye) v26: * Rebased for runtime pm api changes. v27: * Rebased for intel_context_init. * Wrap commit msg to 75. v28: (Chris Wilson) * Use i915_gem_ggtt. * Use i915_request_await_dma_fence to show a better example. v29: * i915_timeline_set_barrier can now fail. (Chris Wilson) v30: * Capture some acks. v31: * Drop the WARN_ON from use controllable paths. (Chris Wilson) * Use overflows_type for all checks. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100899 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107634 Issue: https://github.com/intel/media-driver/issues/267 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Zhipeng Gong <zhipeng.gong@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tony Ye <tony.ye@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Timo Aaltonen <timo.aaltonen@canonical.com> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Stéphane Marchesin <marcheu@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-4-tvrtko.ursulin@linux.intel.com
2019-02-05 16:50:31 +07:00
static int gen8_emit_rpcs_config(struct i915_request *rq,
struct intel_context *ce,
struct intel_sseu sseu)
{
u64 offset;
u32 *cs;
cs = intel_ring_begin(rq, 4);
if (IS_ERR(cs))
return PTR_ERR(cs);
offset = i915_ggtt_offset(ce->state) +
LRC_STATE_PN * PAGE_SIZE +
(CTX_R_PWR_CLK_STATE + 1) * 4;
*cs++ = MI_STORE_DWORD_IMM_GEN4 | MI_USE_GGTT;
*cs++ = lower_32_bits(offset);
*cs++ = upper_32_bits(offset);
*cs++ = gen8_make_rpcs(rq->i915, &sseu);
intel_ring_advance(rq, cs);
return 0;
}
static int
gen8_modify_rpcs_gpu(struct intel_context *ce,
struct intel_engine_cs *engine,
struct intel_sseu sseu)
{
struct drm_i915_private *i915 = engine->i915;
struct i915_request *rq, *prev;
intel_wakeref_t wakeref;
int ret;
GEM_BUG_ON(!ce->pin_count);
lockdep_assert_held(&i915->drm.struct_mutex);
/* Submitting requests etc needs the hw awake. */
wakeref = intel_runtime_pm_get(i915);
rq = i915_request_alloc(engine, i915->kernel_context);
if (IS_ERR(rq)) {
ret = PTR_ERR(rq);
goto out_put;
}
/* Queue this switch after all other activity by this context. */
prev = i915_active_request_raw(&ce->ring->timeline->last_request,
&i915->drm.struct_mutex);
drm/i915: Expose RPCS (SSEU) configuration to userspace (Gen11 only) We want to allow userspace to reconfigure the subslice configuration on a per context basis. This is required for the functional requirement of shutting down non-VME enabled sub-slices on Gen11 parts. To do so, we expose a context parameter to allow adjustment of the RPCS register stored within the context image (and currently not accessible via LRI). If the context is adjusted before first use or whilst idle, the adjustment is for "free"; otherwise if the context is active we queue a request to do so (using the kernel context), following all other activity by that context, which is also marked as barrier for all following submission against the same context. Since the overhead of device re-configuration during context switching can be significant, especially in multi-context workloads, we limit this new uAPI to only support the Gen11 VME use case. In this use case either the device is fully enabled, and exactly one slice and half of the subslices are enabled. Example usage: struct drm_i915_gem_context_param_sseu sseu = { }; struct drm_i915_gem_context_param arg = { .param = I915_CONTEXT_PARAM_SSEU, .ctx_id = gem_context_create(fd), .size = sizeof(sseu), .value = to_user_pointer(&sseu) }; /* Query device defaults. */ gem_context_get_param(fd, &arg); /* Set VME configuration on a 1x6x8 part. */ sseu.slice_mask = 0x1; sseu.subslice_mask = 0xe0; gem_context_set_param(fd, &arg); v2: Fix offset of CTX_R_PWR_CLK_STATE in intel_lr_context_set_sseu() (Lionel) v3: Add ability to program this per engine (Chris) v4: Move most get_sseu() into i915_gem_context.c (Lionel) v5: Validate sseu configuration against the device's capabilities (Lionel) v6: Change context powergating settings through MI_SDM on kernel context (Chris) v7: Synchronize the requests following a powergating setting change using a global dependency (Chris) Iterate timelines through dev_priv.gt.active_rings (Tvrtko) Disable RPCS configuration setting for non capable users (Lionel/Tvrtko) v8: s/union intel_sseu/struct intel_sseu/ (Lionel) s/dev_priv/i915/ (Tvrtko) Change uapi class/instance fields to u16 (Tvrtko) Bump mask fields to 64bits (Lionel) Don't return EPERM when dynamic sseu is disabled (Tvrtko) v9: Import context image into kernel context's ppgtt only when reconfiguring powergated slice/subslices (Chris) Use aliasing ppgtt when needed (Michel) Tvrtko Ursulin: v10: * Update for upstream changes. * Request submit needs a RPM reference. * Reject on !FULL_PPGTT for simplicity. * Pull out get/set param to helpers for readability and less indent. * Use i915_request_await_dma_fence in add_global_barrier to skip waits on the same timeline and avoid GEM_BUG_ON. * No need to explicitly assign a NULL pointer to engine in legacy mode. * No need to move gen8_make_rpcs up. * Factored out global barrier as prep patch. * Allow to only CAP_SYS_ADMIN if !Gen11. v11: * Remove engine vfunc in favour of local helper. (Chris Wilson) * Stop retiring requests before updates since it is not needed (Chris Wilson) * Implement direct CPU update path for idle contexts. (Chris Wilson) * Left side dependency needs only be on the same context timeline. (Chris Wilson) * It is sufficient to order the timeline. (Chris Wilson) * Reject !RCS configuration attempts with -ENODEV for now. v12: * Rebase for make_rpcs. v13: * Centralize SSEU normalization to make_rpcs. * Type width checking (uAPI <-> implementation). * Gen11 restrictions uAPI checks. * Gen11 subslice count differences handling. Chris Wilson: * args->size handling fixes. * Update context image from GGTT. * Postpone context image update to pinning. * Use i915_gem_active_raw instead of last_request_on_engine. v14: * Add activity tracker on intel_context to fix the lifetime issues and simplify the code. (Chris Wilson) v15: * Fix context pin leak if no space in ring by simplifying the context pinning sequence. v16: * Rebase for context get/set param locking changes. * Just -ENODEV on !Gen11. (Joonas) v17: * Fix one Gen11 subslice enablement rule. * Handle error from i915_sw_fence_await_sw_fence_gfp. (Chris Wilson) v18: * Update commit message. (Joonas) * Restrict uAPI to VME use case. (Joonas) v19: * Rebase. v20: * Rebase for ce->active_tracker. v21: * Rebase for IS_GEN changes. v22: * Reserve uAPI for flags straight away. (Chris Wilson) v23: * Rebase for RUNTIME_INFO. v24: * Added some headline docs for the uapi usage. (Joonas/Chris) v25: * Renamed class/instance to engine_class/engine_instance to avoid clash with C++ keyword. (Tony Ye) v26: * Rebased for runtime pm api changes. v27: * Rebased for intel_context_init. * Wrap commit msg to 75. v28: (Chris Wilson) * Use i915_gem_ggtt. * Use i915_request_await_dma_fence to show a better example. v29: * i915_timeline_set_barrier can now fail. (Chris Wilson) v30: * Capture some acks. v31: * Drop the WARN_ON from use controllable paths. (Chris Wilson) * Use overflows_type for all checks. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100899 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107634 Issue: https://github.com/intel/media-driver/issues/267 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Zhipeng Gong <zhipeng.gong@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tony Ye <tony.ye@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Timo Aaltonen <timo.aaltonen@canonical.com> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Stéphane Marchesin <marcheu@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-4-tvrtko.ursulin@linux.intel.com
2019-02-05 16:50:31 +07:00
if (prev && !i915_request_completed(prev)) {
ret = i915_request_await_dma_fence(rq, &prev->fence);
if (ret < 0)
goto out_add;
}
/* Order all following requests to be after. */
ret = i915_timeline_set_barrier(ce->ring->timeline, rq);
if (ret)
goto out_add;
ret = gen8_emit_rpcs_config(rq, ce, sseu);
if (ret)
goto out_add;
/*
* Guarantee context image and the timeline remains pinned until the
* modifying request is retired by setting the ce activity tracker.
*
* But we only need to take one pin on the account of it. Or in other
* words transfer the pinned ce object to tracked active request.
*/
if (!i915_active_request_isset(&ce->active_tracker))
drm/i915: Expose RPCS (SSEU) configuration to userspace (Gen11 only) We want to allow userspace to reconfigure the subslice configuration on a per context basis. This is required for the functional requirement of shutting down non-VME enabled sub-slices on Gen11 parts. To do so, we expose a context parameter to allow adjustment of the RPCS register stored within the context image (and currently not accessible via LRI). If the context is adjusted before first use or whilst idle, the adjustment is for "free"; otherwise if the context is active we queue a request to do so (using the kernel context), following all other activity by that context, which is also marked as barrier for all following submission against the same context. Since the overhead of device re-configuration during context switching can be significant, especially in multi-context workloads, we limit this new uAPI to only support the Gen11 VME use case. In this use case either the device is fully enabled, and exactly one slice and half of the subslices are enabled. Example usage: struct drm_i915_gem_context_param_sseu sseu = { }; struct drm_i915_gem_context_param arg = { .param = I915_CONTEXT_PARAM_SSEU, .ctx_id = gem_context_create(fd), .size = sizeof(sseu), .value = to_user_pointer(&sseu) }; /* Query device defaults. */ gem_context_get_param(fd, &arg); /* Set VME configuration on a 1x6x8 part. */ sseu.slice_mask = 0x1; sseu.subslice_mask = 0xe0; gem_context_set_param(fd, &arg); v2: Fix offset of CTX_R_PWR_CLK_STATE in intel_lr_context_set_sseu() (Lionel) v3: Add ability to program this per engine (Chris) v4: Move most get_sseu() into i915_gem_context.c (Lionel) v5: Validate sseu configuration against the device's capabilities (Lionel) v6: Change context powergating settings through MI_SDM on kernel context (Chris) v7: Synchronize the requests following a powergating setting change using a global dependency (Chris) Iterate timelines through dev_priv.gt.active_rings (Tvrtko) Disable RPCS configuration setting for non capable users (Lionel/Tvrtko) v8: s/union intel_sseu/struct intel_sseu/ (Lionel) s/dev_priv/i915/ (Tvrtko) Change uapi class/instance fields to u16 (Tvrtko) Bump mask fields to 64bits (Lionel) Don't return EPERM when dynamic sseu is disabled (Tvrtko) v9: Import context image into kernel context's ppgtt only when reconfiguring powergated slice/subslices (Chris) Use aliasing ppgtt when needed (Michel) Tvrtko Ursulin: v10: * Update for upstream changes. * Request submit needs a RPM reference. * Reject on !FULL_PPGTT for simplicity. * Pull out get/set param to helpers for readability and less indent. * Use i915_request_await_dma_fence in add_global_barrier to skip waits on the same timeline and avoid GEM_BUG_ON. * No need to explicitly assign a NULL pointer to engine in legacy mode. * No need to move gen8_make_rpcs up. * Factored out global barrier as prep patch. * Allow to only CAP_SYS_ADMIN if !Gen11. v11: * Remove engine vfunc in favour of local helper. (Chris Wilson) * Stop retiring requests before updates since it is not needed (Chris Wilson) * Implement direct CPU update path for idle contexts. (Chris Wilson) * Left side dependency needs only be on the same context timeline. (Chris Wilson) * It is sufficient to order the timeline. (Chris Wilson) * Reject !RCS configuration attempts with -ENODEV for now. v12: * Rebase for make_rpcs. v13: * Centralize SSEU normalization to make_rpcs. * Type width checking (uAPI <-> implementation). * Gen11 restrictions uAPI checks. * Gen11 subslice count differences handling. Chris Wilson: * args->size handling fixes. * Update context image from GGTT. * Postpone context image update to pinning. * Use i915_gem_active_raw instead of last_request_on_engine. v14: * Add activity tracker on intel_context to fix the lifetime issues and simplify the code. (Chris Wilson) v15: * Fix context pin leak if no space in ring by simplifying the context pinning sequence. v16: * Rebase for context get/set param locking changes. * Just -ENODEV on !Gen11. (Joonas) v17: * Fix one Gen11 subslice enablement rule. * Handle error from i915_sw_fence_await_sw_fence_gfp. (Chris Wilson) v18: * Update commit message. (Joonas) * Restrict uAPI to VME use case. (Joonas) v19: * Rebase. v20: * Rebase for ce->active_tracker. v21: * Rebase for IS_GEN changes. v22: * Reserve uAPI for flags straight away. (Chris Wilson) v23: * Rebase for RUNTIME_INFO. v24: * Added some headline docs for the uapi usage. (Joonas/Chris) v25: * Renamed class/instance to engine_class/engine_instance to avoid clash with C++ keyword. (Tony Ye) v26: * Rebased for runtime pm api changes. v27: * Rebased for intel_context_init. * Wrap commit msg to 75. v28: (Chris Wilson) * Use i915_gem_ggtt. * Use i915_request_await_dma_fence to show a better example. v29: * i915_timeline_set_barrier can now fail. (Chris Wilson) v30: * Capture some acks. v31: * Drop the WARN_ON from use controllable paths. (Chris Wilson) * Use overflows_type for all checks. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100899 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107634 Issue: https://github.com/intel/media-driver/issues/267 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Zhipeng Gong <zhipeng.gong@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tony Ye <tony.ye@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Timo Aaltonen <timo.aaltonen@canonical.com> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Stéphane Marchesin <marcheu@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-4-tvrtko.ursulin@linux.intel.com
2019-02-05 16:50:31 +07:00
__intel_context_pin(ce);
__i915_active_request_set(&ce->active_tracker, rq);
drm/i915: Expose RPCS (SSEU) configuration to userspace (Gen11 only) We want to allow userspace to reconfigure the subslice configuration on a per context basis. This is required for the functional requirement of shutting down non-VME enabled sub-slices on Gen11 parts. To do so, we expose a context parameter to allow adjustment of the RPCS register stored within the context image (and currently not accessible via LRI). If the context is adjusted before first use or whilst idle, the adjustment is for "free"; otherwise if the context is active we queue a request to do so (using the kernel context), following all other activity by that context, which is also marked as barrier for all following submission against the same context. Since the overhead of device re-configuration during context switching can be significant, especially in multi-context workloads, we limit this new uAPI to only support the Gen11 VME use case. In this use case either the device is fully enabled, and exactly one slice and half of the subslices are enabled. Example usage: struct drm_i915_gem_context_param_sseu sseu = { }; struct drm_i915_gem_context_param arg = { .param = I915_CONTEXT_PARAM_SSEU, .ctx_id = gem_context_create(fd), .size = sizeof(sseu), .value = to_user_pointer(&sseu) }; /* Query device defaults. */ gem_context_get_param(fd, &arg); /* Set VME configuration on a 1x6x8 part. */ sseu.slice_mask = 0x1; sseu.subslice_mask = 0xe0; gem_context_set_param(fd, &arg); v2: Fix offset of CTX_R_PWR_CLK_STATE in intel_lr_context_set_sseu() (Lionel) v3: Add ability to program this per engine (Chris) v4: Move most get_sseu() into i915_gem_context.c (Lionel) v5: Validate sseu configuration against the device's capabilities (Lionel) v6: Change context powergating settings through MI_SDM on kernel context (Chris) v7: Synchronize the requests following a powergating setting change using a global dependency (Chris) Iterate timelines through dev_priv.gt.active_rings (Tvrtko) Disable RPCS configuration setting for non capable users (Lionel/Tvrtko) v8: s/union intel_sseu/struct intel_sseu/ (Lionel) s/dev_priv/i915/ (Tvrtko) Change uapi class/instance fields to u16 (Tvrtko) Bump mask fields to 64bits (Lionel) Don't return EPERM when dynamic sseu is disabled (Tvrtko) v9: Import context image into kernel context's ppgtt only when reconfiguring powergated slice/subslices (Chris) Use aliasing ppgtt when needed (Michel) Tvrtko Ursulin: v10: * Update for upstream changes. * Request submit needs a RPM reference. * Reject on !FULL_PPGTT for simplicity. * Pull out get/set param to helpers for readability and less indent. * Use i915_request_await_dma_fence in add_global_barrier to skip waits on the same timeline and avoid GEM_BUG_ON. * No need to explicitly assign a NULL pointer to engine in legacy mode. * No need to move gen8_make_rpcs up. * Factored out global barrier as prep patch. * Allow to only CAP_SYS_ADMIN if !Gen11. v11: * Remove engine vfunc in favour of local helper. (Chris Wilson) * Stop retiring requests before updates since it is not needed (Chris Wilson) * Implement direct CPU update path for idle contexts. (Chris Wilson) * Left side dependency needs only be on the same context timeline. (Chris Wilson) * It is sufficient to order the timeline. (Chris Wilson) * Reject !RCS configuration attempts with -ENODEV for now. v12: * Rebase for make_rpcs. v13: * Centralize SSEU normalization to make_rpcs. * Type width checking (uAPI <-> implementation). * Gen11 restrictions uAPI checks. * Gen11 subslice count differences handling. Chris Wilson: * args->size handling fixes. * Update context image from GGTT. * Postpone context image update to pinning. * Use i915_gem_active_raw instead of last_request_on_engine. v14: * Add activity tracker on intel_context to fix the lifetime issues and simplify the code. (Chris Wilson) v15: * Fix context pin leak if no space in ring by simplifying the context pinning sequence. v16: * Rebase for context get/set param locking changes. * Just -ENODEV on !Gen11. (Joonas) v17: * Fix one Gen11 subslice enablement rule. * Handle error from i915_sw_fence_await_sw_fence_gfp. (Chris Wilson) v18: * Update commit message. (Joonas) * Restrict uAPI to VME use case. (Joonas) v19: * Rebase. v20: * Rebase for ce->active_tracker. v21: * Rebase for IS_GEN changes. v22: * Reserve uAPI for flags straight away. (Chris Wilson) v23: * Rebase for RUNTIME_INFO. v24: * Added some headline docs for the uapi usage. (Joonas/Chris) v25: * Renamed class/instance to engine_class/engine_instance to avoid clash with C++ keyword. (Tony Ye) v26: * Rebased for runtime pm api changes. v27: * Rebased for intel_context_init. * Wrap commit msg to 75. v28: (Chris Wilson) * Use i915_gem_ggtt. * Use i915_request_await_dma_fence to show a better example. v29: * i915_timeline_set_barrier can now fail. (Chris Wilson) v30: * Capture some acks. v31: * Drop the WARN_ON from use controllable paths. (Chris Wilson) * Use overflows_type for all checks. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100899 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107634 Issue: https://github.com/intel/media-driver/issues/267 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Zhipeng Gong <zhipeng.gong@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tony Ye <tony.ye@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Timo Aaltonen <timo.aaltonen@canonical.com> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Stéphane Marchesin <marcheu@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-4-tvrtko.ursulin@linux.intel.com
2019-02-05 16:50:31 +07:00
out_add:
i915_request_add(rq);
out_put:
intel_runtime_pm_put(i915, wakeref);
return ret;
}
static int
__i915_gem_context_reconfigure_sseu(struct i915_gem_context *ctx,
struct intel_engine_cs *engine,
struct intel_sseu sseu)
drm/i915: Expose RPCS (SSEU) configuration to userspace (Gen11 only) We want to allow userspace to reconfigure the subslice configuration on a per context basis. This is required for the functional requirement of shutting down non-VME enabled sub-slices on Gen11 parts. To do so, we expose a context parameter to allow adjustment of the RPCS register stored within the context image (and currently not accessible via LRI). If the context is adjusted before first use or whilst idle, the adjustment is for "free"; otherwise if the context is active we queue a request to do so (using the kernel context), following all other activity by that context, which is also marked as barrier for all following submission against the same context. Since the overhead of device re-configuration during context switching can be significant, especially in multi-context workloads, we limit this new uAPI to only support the Gen11 VME use case. In this use case either the device is fully enabled, and exactly one slice and half of the subslices are enabled. Example usage: struct drm_i915_gem_context_param_sseu sseu = { }; struct drm_i915_gem_context_param arg = { .param = I915_CONTEXT_PARAM_SSEU, .ctx_id = gem_context_create(fd), .size = sizeof(sseu), .value = to_user_pointer(&sseu) }; /* Query device defaults. */ gem_context_get_param(fd, &arg); /* Set VME configuration on a 1x6x8 part. */ sseu.slice_mask = 0x1; sseu.subslice_mask = 0xe0; gem_context_set_param(fd, &arg); v2: Fix offset of CTX_R_PWR_CLK_STATE in intel_lr_context_set_sseu() (Lionel) v3: Add ability to program this per engine (Chris) v4: Move most get_sseu() into i915_gem_context.c (Lionel) v5: Validate sseu configuration against the device's capabilities (Lionel) v6: Change context powergating settings through MI_SDM on kernel context (Chris) v7: Synchronize the requests following a powergating setting change using a global dependency (Chris) Iterate timelines through dev_priv.gt.active_rings (Tvrtko) Disable RPCS configuration setting for non capable users (Lionel/Tvrtko) v8: s/union intel_sseu/struct intel_sseu/ (Lionel) s/dev_priv/i915/ (Tvrtko) Change uapi class/instance fields to u16 (Tvrtko) Bump mask fields to 64bits (Lionel) Don't return EPERM when dynamic sseu is disabled (Tvrtko) v9: Import context image into kernel context's ppgtt only when reconfiguring powergated slice/subslices (Chris) Use aliasing ppgtt when needed (Michel) Tvrtko Ursulin: v10: * Update for upstream changes. * Request submit needs a RPM reference. * Reject on !FULL_PPGTT for simplicity. * Pull out get/set param to helpers for readability and less indent. * Use i915_request_await_dma_fence in add_global_barrier to skip waits on the same timeline and avoid GEM_BUG_ON. * No need to explicitly assign a NULL pointer to engine in legacy mode. * No need to move gen8_make_rpcs up. * Factored out global barrier as prep patch. * Allow to only CAP_SYS_ADMIN if !Gen11. v11: * Remove engine vfunc in favour of local helper. (Chris Wilson) * Stop retiring requests before updates since it is not needed (Chris Wilson) * Implement direct CPU update path for idle contexts. (Chris Wilson) * Left side dependency needs only be on the same context timeline. (Chris Wilson) * It is sufficient to order the timeline. (Chris Wilson) * Reject !RCS configuration attempts with -ENODEV for now. v12: * Rebase for make_rpcs. v13: * Centralize SSEU normalization to make_rpcs. * Type width checking (uAPI <-> implementation). * Gen11 restrictions uAPI checks. * Gen11 subslice count differences handling. Chris Wilson: * args->size handling fixes. * Update context image from GGTT. * Postpone context image update to pinning. * Use i915_gem_active_raw instead of last_request_on_engine. v14: * Add activity tracker on intel_context to fix the lifetime issues and simplify the code. (Chris Wilson) v15: * Fix context pin leak if no space in ring by simplifying the context pinning sequence. v16: * Rebase for context get/set param locking changes. * Just -ENODEV on !Gen11. (Joonas) v17: * Fix one Gen11 subslice enablement rule. * Handle error from i915_sw_fence_await_sw_fence_gfp. (Chris Wilson) v18: * Update commit message. (Joonas) * Restrict uAPI to VME use case. (Joonas) v19: * Rebase. v20: * Rebase for ce->active_tracker. v21: * Rebase for IS_GEN changes. v22: * Reserve uAPI for flags straight away. (Chris Wilson) v23: * Rebase for RUNTIME_INFO. v24: * Added some headline docs for the uapi usage. (Joonas/Chris) v25: * Renamed class/instance to engine_class/engine_instance to avoid clash with C++ keyword. (Tony Ye) v26: * Rebased for runtime pm api changes. v27: * Rebased for intel_context_init. * Wrap commit msg to 75. v28: (Chris Wilson) * Use i915_gem_ggtt. * Use i915_request_await_dma_fence to show a better example. v29: * i915_timeline_set_barrier can now fail. (Chris Wilson) v30: * Capture some acks. v31: * Drop the WARN_ON from use controllable paths. (Chris Wilson) * Use overflows_type for all checks. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100899 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107634 Issue: https://github.com/intel/media-driver/issues/267 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Zhipeng Gong <zhipeng.gong@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tony Ye <tony.ye@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Timo Aaltonen <timo.aaltonen@canonical.com> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Stéphane Marchesin <marcheu@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-4-tvrtko.ursulin@linux.intel.com
2019-02-05 16:50:31 +07:00
{
struct intel_context *ce = to_intel_context(ctx, engine);
int ret = 0;
drm/i915: Expose RPCS (SSEU) configuration to userspace (Gen11 only) We want to allow userspace to reconfigure the subslice configuration on a per context basis. This is required for the functional requirement of shutting down non-VME enabled sub-slices on Gen11 parts. To do so, we expose a context parameter to allow adjustment of the RPCS register stored within the context image (and currently not accessible via LRI). If the context is adjusted before first use or whilst idle, the adjustment is for "free"; otherwise if the context is active we queue a request to do so (using the kernel context), following all other activity by that context, which is also marked as barrier for all following submission against the same context. Since the overhead of device re-configuration during context switching can be significant, especially in multi-context workloads, we limit this new uAPI to only support the Gen11 VME use case. In this use case either the device is fully enabled, and exactly one slice and half of the subslices are enabled. Example usage: struct drm_i915_gem_context_param_sseu sseu = { }; struct drm_i915_gem_context_param arg = { .param = I915_CONTEXT_PARAM_SSEU, .ctx_id = gem_context_create(fd), .size = sizeof(sseu), .value = to_user_pointer(&sseu) }; /* Query device defaults. */ gem_context_get_param(fd, &arg); /* Set VME configuration on a 1x6x8 part. */ sseu.slice_mask = 0x1; sseu.subslice_mask = 0xe0; gem_context_set_param(fd, &arg); v2: Fix offset of CTX_R_PWR_CLK_STATE in intel_lr_context_set_sseu() (Lionel) v3: Add ability to program this per engine (Chris) v4: Move most get_sseu() into i915_gem_context.c (Lionel) v5: Validate sseu configuration against the device's capabilities (Lionel) v6: Change context powergating settings through MI_SDM on kernel context (Chris) v7: Synchronize the requests following a powergating setting change using a global dependency (Chris) Iterate timelines through dev_priv.gt.active_rings (Tvrtko) Disable RPCS configuration setting for non capable users (Lionel/Tvrtko) v8: s/union intel_sseu/struct intel_sseu/ (Lionel) s/dev_priv/i915/ (Tvrtko) Change uapi class/instance fields to u16 (Tvrtko) Bump mask fields to 64bits (Lionel) Don't return EPERM when dynamic sseu is disabled (Tvrtko) v9: Import context image into kernel context's ppgtt only when reconfiguring powergated slice/subslices (Chris) Use aliasing ppgtt when needed (Michel) Tvrtko Ursulin: v10: * Update for upstream changes. * Request submit needs a RPM reference. * Reject on !FULL_PPGTT for simplicity. * Pull out get/set param to helpers for readability and less indent. * Use i915_request_await_dma_fence in add_global_barrier to skip waits on the same timeline and avoid GEM_BUG_ON. * No need to explicitly assign a NULL pointer to engine in legacy mode. * No need to move gen8_make_rpcs up. * Factored out global barrier as prep patch. * Allow to only CAP_SYS_ADMIN if !Gen11. v11: * Remove engine vfunc in favour of local helper. (Chris Wilson) * Stop retiring requests before updates since it is not needed (Chris Wilson) * Implement direct CPU update path for idle contexts. (Chris Wilson) * Left side dependency needs only be on the same context timeline. (Chris Wilson) * It is sufficient to order the timeline. (Chris Wilson) * Reject !RCS configuration attempts with -ENODEV for now. v12: * Rebase for make_rpcs. v13: * Centralize SSEU normalization to make_rpcs. * Type width checking (uAPI <-> implementation). * Gen11 restrictions uAPI checks. * Gen11 subslice count differences handling. Chris Wilson: * args->size handling fixes. * Update context image from GGTT. * Postpone context image update to pinning. * Use i915_gem_active_raw instead of last_request_on_engine. v14: * Add activity tracker on intel_context to fix the lifetime issues and simplify the code. (Chris Wilson) v15: * Fix context pin leak if no space in ring by simplifying the context pinning sequence. v16: * Rebase for context get/set param locking changes. * Just -ENODEV on !Gen11. (Joonas) v17: * Fix one Gen11 subslice enablement rule. * Handle error from i915_sw_fence_await_sw_fence_gfp. (Chris Wilson) v18: * Update commit message. (Joonas) * Restrict uAPI to VME use case. (Joonas) v19: * Rebase. v20: * Rebase for ce->active_tracker. v21: * Rebase for IS_GEN changes. v22: * Reserve uAPI for flags straight away. (Chris Wilson) v23: * Rebase for RUNTIME_INFO. v24: * Added some headline docs for the uapi usage. (Joonas/Chris) v25: * Renamed class/instance to engine_class/engine_instance to avoid clash with C++ keyword. (Tony Ye) v26: * Rebased for runtime pm api changes. v27: * Rebased for intel_context_init. * Wrap commit msg to 75. v28: (Chris Wilson) * Use i915_gem_ggtt. * Use i915_request_await_dma_fence to show a better example. v29: * i915_timeline_set_barrier can now fail. (Chris Wilson) v30: * Capture some acks. v31: * Drop the WARN_ON from use controllable paths. (Chris Wilson) * Use overflows_type for all checks. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100899 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107634 Issue: https://github.com/intel/media-driver/issues/267 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Zhipeng Gong <zhipeng.gong@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tony Ye <tony.ye@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Timo Aaltonen <timo.aaltonen@canonical.com> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Stéphane Marchesin <marcheu@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-4-tvrtko.ursulin@linux.intel.com
2019-02-05 16:50:31 +07:00
GEM_BUG_ON(INTEL_GEN(ctx->i915) < 8);
GEM_BUG_ON(engine->id != RCS);
/* Nothing to do if unmodified. */
if (!memcmp(&ce->sseu, &sseu, sizeof(sseu)))
return 0;
drm/i915: Expose RPCS (SSEU) configuration to userspace (Gen11 only) We want to allow userspace to reconfigure the subslice configuration on a per context basis. This is required for the functional requirement of shutting down non-VME enabled sub-slices on Gen11 parts. To do so, we expose a context parameter to allow adjustment of the RPCS register stored within the context image (and currently not accessible via LRI). If the context is adjusted before first use or whilst idle, the adjustment is for "free"; otherwise if the context is active we queue a request to do so (using the kernel context), following all other activity by that context, which is also marked as barrier for all following submission against the same context. Since the overhead of device re-configuration during context switching can be significant, especially in multi-context workloads, we limit this new uAPI to only support the Gen11 VME use case. In this use case either the device is fully enabled, and exactly one slice and half of the subslices are enabled. Example usage: struct drm_i915_gem_context_param_sseu sseu = { }; struct drm_i915_gem_context_param arg = { .param = I915_CONTEXT_PARAM_SSEU, .ctx_id = gem_context_create(fd), .size = sizeof(sseu), .value = to_user_pointer(&sseu) }; /* Query device defaults. */ gem_context_get_param(fd, &arg); /* Set VME configuration on a 1x6x8 part. */ sseu.slice_mask = 0x1; sseu.subslice_mask = 0xe0; gem_context_set_param(fd, &arg); v2: Fix offset of CTX_R_PWR_CLK_STATE in intel_lr_context_set_sseu() (Lionel) v3: Add ability to program this per engine (Chris) v4: Move most get_sseu() into i915_gem_context.c (Lionel) v5: Validate sseu configuration against the device's capabilities (Lionel) v6: Change context powergating settings through MI_SDM on kernel context (Chris) v7: Synchronize the requests following a powergating setting change using a global dependency (Chris) Iterate timelines through dev_priv.gt.active_rings (Tvrtko) Disable RPCS configuration setting for non capable users (Lionel/Tvrtko) v8: s/union intel_sseu/struct intel_sseu/ (Lionel) s/dev_priv/i915/ (Tvrtko) Change uapi class/instance fields to u16 (Tvrtko) Bump mask fields to 64bits (Lionel) Don't return EPERM when dynamic sseu is disabled (Tvrtko) v9: Import context image into kernel context's ppgtt only when reconfiguring powergated slice/subslices (Chris) Use aliasing ppgtt when needed (Michel) Tvrtko Ursulin: v10: * Update for upstream changes. * Request submit needs a RPM reference. * Reject on !FULL_PPGTT for simplicity. * Pull out get/set param to helpers for readability and less indent. * Use i915_request_await_dma_fence in add_global_barrier to skip waits on the same timeline and avoid GEM_BUG_ON. * No need to explicitly assign a NULL pointer to engine in legacy mode. * No need to move gen8_make_rpcs up. * Factored out global barrier as prep patch. * Allow to only CAP_SYS_ADMIN if !Gen11. v11: * Remove engine vfunc in favour of local helper. (Chris Wilson) * Stop retiring requests before updates since it is not needed (Chris Wilson) * Implement direct CPU update path for idle contexts. (Chris Wilson) * Left side dependency needs only be on the same context timeline. (Chris Wilson) * It is sufficient to order the timeline. (Chris Wilson) * Reject !RCS configuration attempts with -ENODEV for now. v12: * Rebase for make_rpcs. v13: * Centralize SSEU normalization to make_rpcs. * Type width checking (uAPI <-> implementation). * Gen11 restrictions uAPI checks. * Gen11 subslice count differences handling. Chris Wilson: * args->size handling fixes. * Update context image from GGTT. * Postpone context image update to pinning. * Use i915_gem_active_raw instead of last_request_on_engine. v14: * Add activity tracker on intel_context to fix the lifetime issues and simplify the code. (Chris Wilson) v15: * Fix context pin leak if no space in ring by simplifying the context pinning sequence. v16: * Rebase for context get/set param locking changes. * Just -ENODEV on !Gen11. (Joonas) v17: * Fix one Gen11 subslice enablement rule. * Handle error from i915_sw_fence_await_sw_fence_gfp. (Chris Wilson) v18: * Update commit message. (Joonas) * Restrict uAPI to VME use case. (Joonas) v19: * Rebase. v20: * Rebase for ce->active_tracker. v21: * Rebase for IS_GEN changes. v22: * Reserve uAPI for flags straight away. (Chris Wilson) v23: * Rebase for RUNTIME_INFO. v24: * Added some headline docs for the uapi usage. (Joonas/Chris) v25: * Renamed class/instance to engine_class/engine_instance to avoid clash with C++ keyword. (Tony Ye) v26: * Rebased for runtime pm api changes. v27: * Rebased for intel_context_init. * Wrap commit msg to 75. v28: (Chris Wilson) * Use i915_gem_ggtt. * Use i915_request_await_dma_fence to show a better example. v29: * i915_timeline_set_barrier can now fail. (Chris Wilson) v30: * Capture some acks. v31: * Drop the WARN_ON from use controllable paths. (Chris Wilson) * Use overflows_type for all checks. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100899 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107634 Issue: https://github.com/intel/media-driver/issues/267 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Zhipeng Gong <zhipeng.gong@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tony Ye <tony.ye@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Timo Aaltonen <timo.aaltonen@canonical.com> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Stéphane Marchesin <marcheu@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-4-tvrtko.ursulin@linux.intel.com
2019-02-05 16:50:31 +07:00
/*
* If context is not idle we have to submit an ordered request to modify
* its context image via the kernel context. Pristine and idle contexts
* will be configured on pinning.
*/
if (ce->pin_count)
ret = gen8_modify_rpcs_gpu(ce, engine, sseu);
if (!ret)
ce->sseu = sseu;
return ret;
}
static int
i915_gem_context_reconfigure_sseu(struct i915_gem_context *ctx,
struct intel_engine_cs *engine,
struct intel_sseu sseu)
{
int ret;
ret = mutex_lock_interruptible(&ctx->i915->drm.struct_mutex);
if (ret)
return ret;
ret = __i915_gem_context_reconfigure_sseu(ctx, engine, sseu);
drm/i915: Expose RPCS (SSEU) configuration to userspace (Gen11 only) We want to allow userspace to reconfigure the subslice configuration on a per context basis. This is required for the functional requirement of shutting down non-VME enabled sub-slices on Gen11 parts. To do so, we expose a context parameter to allow adjustment of the RPCS register stored within the context image (and currently not accessible via LRI). If the context is adjusted before first use or whilst idle, the adjustment is for "free"; otherwise if the context is active we queue a request to do so (using the kernel context), following all other activity by that context, which is also marked as barrier for all following submission against the same context. Since the overhead of device re-configuration during context switching can be significant, especially in multi-context workloads, we limit this new uAPI to only support the Gen11 VME use case. In this use case either the device is fully enabled, and exactly one slice and half of the subslices are enabled. Example usage: struct drm_i915_gem_context_param_sseu sseu = { }; struct drm_i915_gem_context_param arg = { .param = I915_CONTEXT_PARAM_SSEU, .ctx_id = gem_context_create(fd), .size = sizeof(sseu), .value = to_user_pointer(&sseu) }; /* Query device defaults. */ gem_context_get_param(fd, &arg); /* Set VME configuration on a 1x6x8 part. */ sseu.slice_mask = 0x1; sseu.subslice_mask = 0xe0; gem_context_set_param(fd, &arg); v2: Fix offset of CTX_R_PWR_CLK_STATE in intel_lr_context_set_sseu() (Lionel) v3: Add ability to program this per engine (Chris) v4: Move most get_sseu() into i915_gem_context.c (Lionel) v5: Validate sseu configuration against the device's capabilities (Lionel) v6: Change context powergating settings through MI_SDM on kernel context (Chris) v7: Synchronize the requests following a powergating setting change using a global dependency (Chris) Iterate timelines through dev_priv.gt.active_rings (Tvrtko) Disable RPCS configuration setting for non capable users (Lionel/Tvrtko) v8: s/union intel_sseu/struct intel_sseu/ (Lionel) s/dev_priv/i915/ (Tvrtko) Change uapi class/instance fields to u16 (Tvrtko) Bump mask fields to 64bits (Lionel) Don't return EPERM when dynamic sseu is disabled (Tvrtko) v9: Import context image into kernel context's ppgtt only when reconfiguring powergated slice/subslices (Chris) Use aliasing ppgtt when needed (Michel) Tvrtko Ursulin: v10: * Update for upstream changes. * Request submit needs a RPM reference. * Reject on !FULL_PPGTT for simplicity. * Pull out get/set param to helpers for readability and less indent. * Use i915_request_await_dma_fence in add_global_barrier to skip waits on the same timeline and avoid GEM_BUG_ON. * No need to explicitly assign a NULL pointer to engine in legacy mode. * No need to move gen8_make_rpcs up. * Factored out global barrier as prep patch. * Allow to only CAP_SYS_ADMIN if !Gen11. v11: * Remove engine vfunc in favour of local helper. (Chris Wilson) * Stop retiring requests before updates since it is not needed (Chris Wilson) * Implement direct CPU update path for idle contexts. (Chris Wilson) * Left side dependency needs only be on the same context timeline. (Chris Wilson) * It is sufficient to order the timeline. (Chris Wilson) * Reject !RCS configuration attempts with -ENODEV for now. v12: * Rebase for make_rpcs. v13: * Centralize SSEU normalization to make_rpcs. * Type width checking (uAPI <-> implementation). * Gen11 restrictions uAPI checks. * Gen11 subslice count differences handling. Chris Wilson: * args->size handling fixes. * Update context image from GGTT. * Postpone context image update to pinning. * Use i915_gem_active_raw instead of last_request_on_engine. v14: * Add activity tracker on intel_context to fix the lifetime issues and simplify the code. (Chris Wilson) v15: * Fix context pin leak if no space in ring by simplifying the context pinning sequence. v16: * Rebase for context get/set param locking changes. * Just -ENODEV on !Gen11. (Joonas) v17: * Fix one Gen11 subslice enablement rule. * Handle error from i915_sw_fence_await_sw_fence_gfp. (Chris Wilson) v18: * Update commit message. (Joonas) * Restrict uAPI to VME use case. (Joonas) v19: * Rebase. v20: * Rebase for ce->active_tracker. v21: * Rebase for IS_GEN changes. v22: * Reserve uAPI for flags straight away. (Chris Wilson) v23: * Rebase for RUNTIME_INFO. v24: * Added some headline docs for the uapi usage. (Joonas/Chris) v25: * Renamed class/instance to engine_class/engine_instance to avoid clash with C++ keyword. (Tony Ye) v26: * Rebased for runtime pm api changes. v27: * Rebased for intel_context_init. * Wrap commit msg to 75. v28: (Chris Wilson) * Use i915_gem_ggtt. * Use i915_request_await_dma_fence to show a better example. v29: * i915_timeline_set_barrier can now fail. (Chris Wilson) v30: * Capture some acks. v31: * Drop the WARN_ON from use controllable paths. (Chris Wilson) * Use overflows_type for all checks. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100899 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107634 Issue: https://github.com/intel/media-driver/issues/267 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Zhipeng Gong <zhipeng.gong@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tony Ye <tony.ye@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Timo Aaltonen <timo.aaltonen@canonical.com> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Stéphane Marchesin <marcheu@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-4-tvrtko.ursulin@linux.intel.com
2019-02-05 16:50:31 +07:00
mutex_unlock(&ctx->i915->drm.struct_mutex);
return ret;
}
static int
user_to_context_sseu(struct drm_i915_private *i915,
const struct drm_i915_gem_context_param_sseu *user,
struct intel_sseu *context)
{
const struct sseu_dev_info *device = &RUNTIME_INFO(i915)->sseu;
/* No zeros in any field. */
if (!user->slice_mask || !user->subslice_mask ||
!user->min_eus_per_subslice || !user->max_eus_per_subslice)
return -EINVAL;
/* Max > min. */
if (user->max_eus_per_subslice < user->min_eus_per_subslice)
return -EINVAL;
/*
* Some future proofing on the types since the uAPI is wider than the
* current internal implementation.
*/
if (overflows_type(user->slice_mask, context->slice_mask) ||
overflows_type(user->subslice_mask, context->subslice_mask) ||
overflows_type(user->min_eus_per_subslice,
context->min_eus_per_subslice) ||
overflows_type(user->max_eus_per_subslice,
context->max_eus_per_subslice))
return -EINVAL;
/* Check validity against hardware. */
if (user->slice_mask & ~device->slice_mask)
return -EINVAL;
if (user->subslice_mask & ~device->subslice_mask[0])
return -EINVAL;
if (user->max_eus_per_subslice > device->max_eus_per_subslice)
return -EINVAL;
context->slice_mask = user->slice_mask;
context->subslice_mask = user->subslice_mask;
context->min_eus_per_subslice = user->min_eus_per_subslice;
context->max_eus_per_subslice = user->max_eus_per_subslice;
/* Part specific restrictions. */
if (IS_GEN(i915, 11)) {
unsigned int hw_s = hweight8(device->slice_mask);
unsigned int hw_ss_per_s = hweight8(device->subslice_mask[0]);
unsigned int req_s = hweight8(context->slice_mask);
unsigned int req_ss = hweight8(context->subslice_mask);
/*
* Only full subslice enablement is possible if more than one
* slice is turned on.
*/
if (req_s > 1 && req_ss != hw_ss_per_s)
return -EINVAL;
/*
* If more than four (SScount bitfield limit) subslices are
* requested then the number has to be even.
*/
if (req_ss > 4 && (req_ss & 1))
return -EINVAL;
/*
* If only one slice is enabled and subslice count is below the
* device full enablement, it must be at most half of the all
* available subslices.
*/
if (req_s == 1 && req_ss < hw_ss_per_s &&
req_ss > (hw_ss_per_s / 2))
return -EINVAL;
/* ABI restriction - VME use case only. */
/* All slices or one slice only. */
if (req_s != 1 && req_s != hw_s)
return -EINVAL;
/*
* Half subslices or full enablement only when one slice is
* enabled.
*/
if (req_s == 1 &&
(req_ss != hw_ss_per_s && req_ss != (hw_ss_per_s / 2)))
return -EINVAL;
/* No EU configuration changes. */
if ((user->min_eus_per_subslice !=
device->max_eus_per_subslice) ||
(user->max_eus_per_subslice !=
device->max_eus_per_subslice))
return -EINVAL;
}
return 0;
}
static int set_sseu(struct i915_gem_context *ctx,
struct drm_i915_gem_context_param *args)
{
struct drm_i915_private *i915 = ctx->i915;
struct drm_i915_gem_context_param_sseu user_sseu;
struct intel_engine_cs *engine;
struct intel_sseu sseu;
int ret;
if (args->size < sizeof(user_sseu))
return -EINVAL;
if (!IS_GEN(i915, 11))
return -ENODEV;
if (copy_from_user(&user_sseu, u64_to_user_ptr(args->value),
sizeof(user_sseu)))
return -EFAULT;
if (user_sseu.flags || user_sseu.rsvd)
return -EINVAL;
engine = intel_engine_lookup_user(i915,
user_sseu.engine_class,
user_sseu.engine_instance);
if (!engine)
return -EINVAL;
/* Only render engine supports RPCS configuration. */
if (engine->class != RENDER_CLASS)
return -ENODEV;
ret = user_to_context_sseu(i915, &user_sseu, &sseu);
if (ret)
return ret;
ret = i915_gem_context_reconfigure_sseu(ctx, engine, sseu);
if (ret)
return ret;
args->size = sizeof(user_sseu);
return 0;
}
int i915_gem_context_setparam_ioctl(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_file_private *file_priv = file->driver_priv;
struct drm_i915_gem_context_param *args = data;
struct i915_gem_context *ctx;
int ret = 0;
ctx = i915_gem_context_lookup(file_priv, args->ctx_id);
if (!ctx)
return -ENOENT;
switch (args->param) {
case I915_CONTEXT_PARAM_BAN_PERIOD:
ret = -EINVAL;
break;
case I915_CONTEXT_PARAM_NO_ZEROMAP:
if (args->size)
ret = -EINVAL;
else if (args->value)
set_bit(UCONTEXT_NO_ZEROMAP, &ctx->user_flags);
else
clear_bit(UCONTEXT_NO_ZEROMAP, &ctx->user_flags);
break;
case I915_CONTEXT_PARAM_NO_ERROR_CAPTURE:
if (args->size)
ret = -EINVAL;
else if (args->value)
i915_gem_context_set_no_error_capture(ctx);
else
i915_gem_context_clear_no_error_capture(ctx);
break;
case I915_CONTEXT_PARAM_BANNABLE:
if (args->size)
ret = -EINVAL;
else if (!capable(CAP_SYS_ADMIN) && !args->value)
ret = -EPERM;
else if (args->value)
i915_gem_context_set_bannable(ctx);
else
i915_gem_context_clear_bannable(ctx);
break;
drm/i915/scheduler: Support user-defined priorities Use a priority stored in the context as the initial value when submitting a request. This allows us to change the default priority on a per-context basis, allowing different contexts to be favoured with GPU time at the expense of lower importance work. The user can adjust the context's priority via I915_CONTEXT_PARAM_PRIORITY, with more positive values being higher priority (they will be serviced earlier, after their dependencies have been resolved). Any prerequisite work for an execbuf will have its priority raised to match the new request as required. Normal users can specify any value in the range of -1023 to 0 [default], i.e. they can reduce the priority of their workloads (and temporarily boost it back to normal if so desired). Privileged users can specify any value in the range of -1023 to 1023, [default is 0], i.e. they can raise their priority above all overs and so potentially starve the system. Note that the existing schedulers are not fair, nor load balancing, the execution is strictly by priority on a first-come, first-served basis, and the driver may choose to boost some requests above the range available to users. This priority was originally based around nice(2), but evolved to allow clients to adjust their priority within a small range, and allow for a privileged high priority range. For example, this can be used to implement EGL_IMG_context_priority https://www.khronos.org/registry/egl/extensions/IMG/EGL_IMG_context_priority.txt EGL_CONTEXT_PRIORITY_LEVEL_IMG determines the priority level of the context to be created. This attribute is a hint, as an implementation may not support multiple contexts at some priority levels and system policy may limit access to high priority contexts to appropriate system privilege level. The default value for EGL_CONTEXT_PRIORITY_LEVEL_IMG is EGL_CONTEXT_PRIORITY_MEDIUM_IMG." so we can map PRIORITY_HIGH -> 1023 [privileged, will failback to 0] PRIORITY_MED -> 0 [default] PRIORITY_LOW -> -1023 They also map onto the priorities used by VkQueue (and a VkQueue is essentially a timeline, our i915_gem_context under full-ppgtt). v2: s/CAP_SYS_ADMIN/CAP_SYS_NICE/ v3: Report min/max user priorities as defines in the uapi, and rebase internal priorities on the exposed values. Testcase: igt/gem_exec_schedule Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-9-chris@chris-wilson.co.uk
2017-10-04 03:34:53 +07:00
case I915_CONTEXT_PARAM_PRIORITY:
{
s64 priority = args->value;
drm/i915/scheduler: Support user-defined priorities Use a priority stored in the context as the initial value when submitting a request. This allows us to change the default priority on a per-context basis, allowing different contexts to be favoured with GPU time at the expense of lower importance work. The user can adjust the context's priority via I915_CONTEXT_PARAM_PRIORITY, with more positive values being higher priority (they will be serviced earlier, after their dependencies have been resolved). Any prerequisite work for an execbuf will have its priority raised to match the new request as required. Normal users can specify any value in the range of -1023 to 0 [default], i.e. they can reduce the priority of their workloads (and temporarily boost it back to normal if so desired). Privileged users can specify any value in the range of -1023 to 1023, [default is 0], i.e. they can raise their priority above all overs and so potentially starve the system. Note that the existing schedulers are not fair, nor load balancing, the execution is strictly by priority on a first-come, first-served basis, and the driver may choose to boost some requests above the range available to users. This priority was originally based around nice(2), but evolved to allow clients to adjust their priority within a small range, and allow for a privileged high priority range. For example, this can be used to implement EGL_IMG_context_priority https://www.khronos.org/registry/egl/extensions/IMG/EGL_IMG_context_priority.txt EGL_CONTEXT_PRIORITY_LEVEL_IMG determines the priority level of the context to be created. This attribute is a hint, as an implementation may not support multiple contexts at some priority levels and system policy may limit access to high priority contexts to appropriate system privilege level. The default value for EGL_CONTEXT_PRIORITY_LEVEL_IMG is EGL_CONTEXT_PRIORITY_MEDIUM_IMG." so we can map PRIORITY_HIGH -> 1023 [privileged, will failback to 0] PRIORITY_MED -> 0 [default] PRIORITY_LOW -> -1023 They also map onto the priorities used by VkQueue (and a VkQueue is essentially a timeline, our i915_gem_context under full-ppgtt). v2: s/CAP_SYS_ADMIN/CAP_SYS_NICE/ v3: Report min/max user priorities as defines in the uapi, and rebase internal priorities on the exposed values. Testcase: igt/gem_exec_schedule Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-9-chris@chris-wilson.co.uk
2017-10-04 03:34:53 +07:00
if (args->size)
ret = -EINVAL;
else if (!(to_i915(dev)->caps.scheduler & I915_SCHEDULER_CAP_PRIORITY))
drm/i915/scheduler: Support user-defined priorities Use a priority stored in the context as the initial value when submitting a request. This allows us to change the default priority on a per-context basis, allowing different contexts to be favoured with GPU time at the expense of lower importance work. The user can adjust the context's priority via I915_CONTEXT_PARAM_PRIORITY, with more positive values being higher priority (they will be serviced earlier, after their dependencies have been resolved). Any prerequisite work for an execbuf will have its priority raised to match the new request as required. Normal users can specify any value in the range of -1023 to 0 [default], i.e. they can reduce the priority of their workloads (and temporarily boost it back to normal if so desired). Privileged users can specify any value in the range of -1023 to 1023, [default is 0], i.e. they can raise their priority above all overs and so potentially starve the system. Note that the existing schedulers are not fair, nor load balancing, the execution is strictly by priority on a first-come, first-served basis, and the driver may choose to boost some requests above the range available to users. This priority was originally based around nice(2), but evolved to allow clients to adjust their priority within a small range, and allow for a privileged high priority range. For example, this can be used to implement EGL_IMG_context_priority https://www.khronos.org/registry/egl/extensions/IMG/EGL_IMG_context_priority.txt EGL_CONTEXT_PRIORITY_LEVEL_IMG determines the priority level of the context to be created. This attribute is a hint, as an implementation may not support multiple contexts at some priority levels and system policy may limit access to high priority contexts to appropriate system privilege level. The default value for EGL_CONTEXT_PRIORITY_LEVEL_IMG is EGL_CONTEXT_PRIORITY_MEDIUM_IMG." so we can map PRIORITY_HIGH -> 1023 [privileged, will failback to 0] PRIORITY_MED -> 0 [default] PRIORITY_LOW -> -1023 They also map onto the priorities used by VkQueue (and a VkQueue is essentially a timeline, our i915_gem_context under full-ppgtt). v2: s/CAP_SYS_ADMIN/CAP_SYS_NICE/ v3: Report min/max user priorities as defines in the uapi, and rebase internal priorities on the exposed values. Testcase: igt/gem_exec_schedule Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-9-chris@chris-wilson.co.uk
2017-10-04 03:34:53 +07:00
ret = -ENODEV;
else if (priority > I915_CONTEXT_MAX_USER_PRIORITY ||
priority < I915_CONTEXT_MIN_USER_PRIORITY)
ret = -EINVAL;
else if (priority > I915_CONTEXT_DEFAULT_PRIORITY &&
!capable(CAP_SYS_NICE))
ret = -EPERM;
else
ctx->sched.priority =
I915_USER_PRIORITY(priority);
drm/i915/scheduler: Support user-defined priorities Use a priority stored in the context as the initial value when submitting a request. This allows us to change the default priority on a per-context basis, allowing different contexts to be favoured with GPU time at the expense of lower importance work. The user can adjust the context's priority via I915_CONTEXT_PARAM_PRIORITY, with more positive values being higher priority (they will be serviced earlier, after their dependencies have been resolved). Any prerequisite work for an execbuf will have its priority raised to match the new request as required. Normal users can specify any value in the range of -1023 to 0 [default], i.e. they can reduce the priority of their workloads (and temporarily boost it back to normal if so desired). Privileged users can specify any value in the range of -1023 to 1023, [default is 0], i.e. they can raise their priority above all overs and so potentially starve the system. Note that the existing schedulers are not fair, nor load balancing, the execution is strictly by priority on a first-come, first-served basis, and the driver may choose to boost some requests above the range available to users. This priority was originally based around nice(2), but evolved to allow clients to adjust their priority within a small range, and allow for a privileged high priority range. For example, this can be used to implement EGL_IMG_context_priority https://www.khronos.org/registry/egl/extensions/IMG/EGL_IMG_context_priority.txt EGL_CONTEXT_PRIORITY_LEVEL_IMG determines the priority level of the context to be created. This attribute is a hint, as an implementation may not support multiple contexts at some priority levels and system policy may limit access to high priority contexts to appropriate system privilege level. The default value for EGL_CONTEXT_PRIORITY_LEVEL_IMG is EGL_CONTEXT_PRIORITY_MEDIUM_IMG." so we can map PRIORITY_HIGH -> 1023 [privileged, will failback to 0] PRIORITY_MED -> 0 [default] PRIORITY_LOW -> -1023 They also map onto the priorities used by VkQueue (and a VkQueue is essentially a timeline, our i915_gem_context under full-ppgtt). v2: s/CAP_SYS_ADMIN/CAP_SYS_NICE/ v3: Report min/max user priorities as defines in the uapi, and rebase internal priorities on the exposed values. Testcase: igt/gem_exec_schedule Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-9-chris@chris-wilson.co.uk
2017-10-04 03:34:53 +07:00
}
break;
drm/i915: Expose RPCS (SSEU) configuration to userspace (Gen11 only) We want to allow userspace to reconfigure the subslice configuration on a per context basis. This is required for the functional requirement of shutting down non-VME enabled sub-slices on Gen11 parts. To do so, we expose a context parameter to allow adjustment of the RPCS register stored within the context image (and currently not accessible via LRI). If the context is adjusted before first use or whilst idle, the adjustment is for "free"; otherwise if the context is active we queue a request to do so (using the kernel context), following all other activity by that context, which is also marked as barrier for all following submission against the same context. Since the overhead of device re-configuration during context switching can be significant, especially in multi-context workloads, we limit this new uAPI to only support the Gen11 VME use case. In this use case either the device is fully enabled, and exactly one slice and half of the subslices are enabled. Example usage: struct drm_i915_gem_context_param_sseu sseu = { }; struct drm_i915_gem_context_param arg = { .param = I915_CONTEXT_PARAM_SSEU, .ctx_id = gem_context_create(fd), .size = sizeof(sseu), .value = to_user_pointer(&sseu) }; /* Query device defaults. */ gem_context_get_param(fd, &arg); /* Set VME configuration on a 1x6x8 part. */ sseu.slice_mask = 0x1; sseu.subslice_mask = 0xe0; gem_context_set_param(fd, &arg); v2: Fix offset of CTX_R_PWR_CLK_STATE in intel_lr_context_set_sseu() (Lionel) v3: Add ability to program this per engine (Chris) v4: Move most get_sseu() into i915_gem_context.c (Lionel) v5: Validate sseu configuration against the device's capabilities (Lionel) v6: Change context powergating settings through MI_SDM on kernel context (Chris) v7: Synchronize the requests following a powergating setting change using a global dependency (Chris) Iterate timelines through dev_priv.gt.active_rings (Tvrtko) Disable RPCS configuration setting for non capable users (Lionel/Tvrtko) v8: s/union intel_sseu/struct intel_sseu/ (Lionel) s/dev_priv/i915/ (Tvrtko) Change uapi class/instance fields to u16 (Tvrtko) Bump mask fields to 64bits (Lionel) Don't return EPERM when dynamic sseu is disabled (Tvrtko) v9: Import context image into kernel context's ppgtt only when reconfiguring powergated slice/subslices (Chris) Use aliasing ppgtt when needed (Michel) Tvrtko Ursulin: v10: * Update for upstream changes. * Request submit needs a RPM reference. * Reject on !FULL_PPGTT for simplicity. * Pull out get/set param to helpers for readability and less indent. * Use i915_request_await_dma_fence in add_global_barrier to skip waits on the same timeline and avoid GEM_BUG_ON. * No need to explicitly assign a NULL pointer to engine in legacy mode. * No need to move gen8_make_rpcs up. * Factored out global barrier as prep patch. * Allow to only CAP_SYS_ADMIN if !Gen11. v11: * Remove engine vfunc in favour of local helper. (Chris Wilson) * Stop retiring requests before updates since it is not needed (Chris Wilson) * Implement direct CPU update path for idle contexts. (Chris Wilson) * Left side dependency needs only be on the same context timeline. (Chris Wilson) * It is sufficient to order the timeline. (Chris Wilson) * Reject !RCS configuration attempts with -ENODEV for now. v12: * Rebase for make_rpcs. v13: * Centralize SSEU normalization to make_rpcs. * Type width checking (uAPI <-> implementation). * Gen11 restrictions uAPI checks. * Gen11 subslice count differences handling. Chris Wilson: * args->size handling fixes. * Update context image from GGTT. * Postpone context image update to pinning. * Use i915_gem_active_raw instead of last_request_on_engine. v14: * Add activity tracker on intel_context to fix the lifetime issues and simplify the code. (Chris Wilson) v15: * Fix context pin leak if no space in ring by simplifying the context pinning sequence. v16: * Rebase for context get/set param locking changes. * Just -ENODEV on !Gen11. (Joonas) v17: * Fix one Gen11 subslice enablement rule. * Handle error from i915_sw_fence_await_sw_fence_gfp. (Chris Wilson) v18: * Update commit message. (Joonas) * Restrict uAPI to VME use case. (Joonas) v19: * Rebase. v20: * Rebase for ce->active_tracker. v21: * Rebase for IS_GEN changes. v22: * Reserve uAPI for flags straight away. (Chris Wilson) v23: * Rebase for RUNTIME_INFO. v24: * Added some headline docs for the uapi usage. (Joonas/Chris) v25: * Renamed class/instance to engine_class/engine_instance to avoid clash with C++ keyword. (Tony Ye) v26: * Rebased for runtime pm api changes. v27: * Rebased for intel_context_init. * Wrap commit msg to 75. v28: (Chris Wilson) * Use i915_gem_ggtt. * Use i915_request_await_dma_fence to show a better example. v29: * i915_timeline_set_barrier can now fail. (Chris Wilson) v30: * Capture some acks. v31: * Drop the WARN_ON from use controllable paths. (Chris Wilson) * Use overflows_type for all checks. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100899 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107634 Issue: https://github.com/intel/media-driver/issues/267 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Zhipeng Gong <zhipeng.gong@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tony Ye <tony.ye@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Timo Aaltonen <timo.aaltonen@canonical.com> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Stéphane Marchesin <marcheu@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-4-tvrtko.ursulin@linux.intel.com
2019-02-05 16:50:31 +07:00
case I915_CONTEXT_PARAM_SSEU:
ret = set_sseu(ctx, args);
break;
default:
ret = -EINVAL;
break;
}
i915_gem_context_put(ctx);
return ret;
}
int i915_gem_context_reset_stats_ioctl(struct drm_device *dev,
void *data, struct drm_file *file)
{
struct drm_i915_private *dev_priv = to_i915(dev);
struct drm_i915_reset_stats *args = data;
struct i915_gem_context *ctx;
int ret;
if (args->flags || args->pad)
return -EINVAL;
ret = -ENOENT;
rcu_read_lock();
ctx = __i915_gem_context_lookup_rcu(file->driver_priv, args->ctx_id);
if (!ctx)
goto out;
/*
* We opt for unserialised reads here. This may result in tearing
* in the extremely unlikely event of a GPU hang on this context
* as we are querying them. If we need that extra layer of protection,
* we should wrap the hangstats with a seqlock.
*/
if (capable(CAP_SYS_ADMIN))
args->reset_count = i915_reset_count(&dev_priv->gpu_error);
else
args->reset_count = 0;
args->batch_active = atomic_read(&ctx->guilty_count);
args->batch_pending = atomic_read(&ctx->active_count);
ret = 0;
out:
rcu_read_unlock();
return ret;
}
drm/i915: Reduce context HW ID lifetime Future gen reduce the number of bits we will have available to differentiate between contexts, so reduce the lifetime of the ID assignment from that of the context to its current active cycle (i.e. only while it is pinned for use by the HW, will it have a constant ID). This means that instead of a max of 2k allocated contexts (worst case before fun with bit twiddling), we instead have a limit of 2k in flight contexts (minus a few that have been pinned by the kernel or by perf). To reduce the number of contexts id we require, we allocate a context id on first and mark it as pinned for as long as the GEM context itself is, that is we keep it pinned it while active on each engine. If we exhaust our context id space, then we try to reclaim an id from an idle context. In the extreme case where all context ids are pinned by active contexts, we force the system to idle in order to recover ids. We cannot reduce the scope of an HW-ID to an engine (allowing the same gem_context to have different ids on each engine) as in the future we will need to preassign an id before we know which engine the context is being executed on. v2: Improved commentary (Tvrtko) [I tried at least] References: https://bugs.freedesktop.org/show_bug.cgi?id=107788 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180904153117.3907-1-chris@chris-wilson.co.uk
2018-09-04 22:31:17 +07:00
int __i915_gem_context_pin_hw_id(struct i915_gem_context *ctx)
{
struct drm_i915_private *i915 = ctx->i915;
int err = 0;
mutex_lock(&i915->contexts.mutex);
GEM_BUG_ON(i915_gem_context_is_closed(ctx));
if (list_empty(&ctx->hw_id_link)) {
GEM_BUG_ON(atomic_read(&ctx->hw_id_pin_count));
err = assign_hw_id(i915, &ctx->hw_id);
if (err)
goto out_unlock;
list_add_tail(&ctx->hw_id_link, &i915->contexts.hw_id_list);
}
GEM_BUG_ON(atomic_read(&ctx->hw_id_pin_count) == ~0u);
atomic_inc(&ctx->hw_id_pin_count);
out_unlock:
mutex_unlock(&i915->contexts.mutex);
return err;
}
#if IS_ENABLED(CONFIG_DRM_I915_SELFTEST)
#include "selftests/mock_context.c"
#include "selftests/i915_gem_context.c"
#endif