linux_dsm_epyc7002/drivers/media/radio/si4713/si4713.h

255 lines
7.2 KiB
C
Raw Normal View History

/*
* drivers/media/radio/si4713-i2c.h
*
* Property and commands definitions for Si4713 radio transmitter chip.
*
* Copyright (c) 2008 Instituto Nokia de Tecnologia - INdT
* Contact: Eduardo Valentin <eduardo.valentin@nokia.com>
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*
*/
#ifndef SI4713_I2C_H
#define SI4713_I2C_H
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/gpio/consumer.h>
#include <media/v4l2-subdev.h>
#include <media/v4l2-ctrls.h>
[media] include/media: move platform_data to linux/platform_data/media Let's not mix platform_data headers with the core headers. Instead, let's create a subdir at linux/platform_data and move the headers to that common place, adding it to MAINTAINERS. The headers were moved with: mkdir include/linux/platform_data/media/; git mv include/media/gpio-ir-recv.h include/media/ir-rx51.h include/media/mmp-camera.h include/media/omap1_camera.h include/media/omap4iss.h include/media/s5p_hdmi.h include/media/si4713.h include/media/sii9234.h include/media/smiapp.h include/media/soc_camera.h include/media/soc_camera_platform.h include/media/timb_radio.h include/media/timb_video.h include/linux/platform_data/media/ And the references fixed with this script: MAIN_DIR="linux/platform_data/" PREV_DIR="media/" DIRS="media/" echo "Checking affected files" >&2 for i in $DIRS; do for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do n=`basename $j` git grep -l $n done done|sort|uniq >files && ( echo "Handling files..." >&2; echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done"; ); echo "Handling documentation..." >&2; echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo " perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done" ); ) >script && . ./script Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-11-16 17:35:53 +07:00
#include <linux/platform_data/media/si4713.h>
#define SI4713_PRODUCT_NUMBER 0x0D
/* Command Timeouts */
#define DEFAULT_TIMEOUT 500
#define TIMEOUT_SET_PROPERTY 20
#define TIMEOUT_TX_TUNE_POWER 30000
#define TIMEOUT_TX_TUNE 110000
#define TIMEOUT_POWER_UP 200000
/*
* Command and its arguments definitions
*/
#define SI4713_PWUP_CTSIEN (1<<7)
#define SI4713_PWUP_GPO2OEN (1<<6)
#define SI4713_PWUP_PATCH (1<<5)
#define SI4713_PWUP_XOSCEN (1<<4)
#define SI4713_PWUP_FUNC_TX 0x02
#define SI4713_PWUP_FUNC_PATCH 0x0F
#define SI4713_PWUP_OPMOD_ANALOG 0x50
#define SI4713_PWUP_OPMOD_DIGITAL 0x0F
#define SI4713_PWUP_NARGS 2
#define SI4713_PWUP_NRESP 1
#define SI4713_CMD_POWER_UP 0x01
#define SI4713_GETREV_NRESP 9
#define SI4713_CMD_GET_REV 0x10
#define SI4713_PWDN_NRESP 1
#define SI4713_CMD_POWER_DOWN 0x11
#define SI4713_SET_PROP_NARGS 5
#define SI4713_SET_PROP_NRESP 1
#define SI4713_CMD_SET_PROPERTY 0x12
#define SI4713_GET_PROP_NARGS 3
#define SI4713_GET_PROP_NRESP 4
#define SI4713_CMD_GET_PROPERTY 0x13
#define SI4713_GET_STATUS_NRESP 1
#define SI4713_CMD_GET_INT_STATUS 0x14
#define SI4713_CMD_PATCH_ARGS 0x15
#define SI4713_CMD_PATCH_DATA 0x16
#define SI4713_MAX_FREQ 10800
#define SI4713_MIN_FREQ 7600
#define SI4713_TXFREQ_NARGS 3
#define SI4713_TXFREQ_NRESP 1
#define SI4713_CMD_TX_TUNE_FREQ 0x30
#define SI4713_MAX_POWER 120
#define SI4713_MIN_POWER 88
#define SI4713_MAX_ANTCAP 191
#define SI4713_MIN_ANTCAP 0
#define SI4713_TXPWR_NARGS 4
#define SI4713_TXPWR_NRESP 1
#define SI4713_CMD_TX_TUNE_POWER 0x31
#define SI4713_TXMEA_NARGS 4
#define SI4713_TXMEA_NRESP 1
#define SI4713_CMD_TX_TUNE_MEASURE 0x32
#define SI4713_INTACK_MASK 0x01
#define SI4713_TXSTATUS_NARGS 1
#define SI4713_TXSTATUS_NRESP 8
#define SI4713_CMD_TX_TUNE_STATUS 0x33
#define SI4713_OVERMOD_BIT (1 << 2)
#define SI4713_IALH_BIT (1 << 1)
#define SI4713_IALL_BIT (1 << 0)
#define SI4713_ASQSTATUS_NARGS 1
#define SI4713_ASQSTATUS_NRESP 5
#define SI4713_CMD_TX_ASQ_STATUS 0x34
#define SI4713_RDSBUFF_MODE_MASK 0x87
#define SI4713_RDSBUFF_NARGS 7
#define SI4713_RDSBUFF_NRESP 6
#define SI4713_CMD_TX_RDS_BUFF 0x35
#define SI4713_RDSPS_PSID_MASK 0x1F
#define SI4713_RDSPS_NARGS 5
#define SI4713_RDSPS_NRESP 1
#define SI4713_CMD_TX_RDS_PS 0x36
#define SI4713_CMD_GPO_CTL 0x80
#define SI4713_CMD_GPO_SET 0x81
/*
* Bits from status response
*/
#define SI4713_CTS (1<<7)
#define SI4713_ERR (1<<6)
#define SI4713_RDS_INT (1<<2)
#define SI4713_ASQ_INT (1<<1)
#define SI4713_STC_INT (1<<0)
/*
* Property definitions
*/
#define SI4713_GPO_IEN 0x0001
#define SI4713_DIG_INPUT_FORMAT 0x0101
#define SI4713_DIG_INPUT_SAMPLE_RATE 0x0103
#define SI4713_REFCLK_FREQ 0x0201
#define SI4713_REFCLK_PRESCALE 0x0202
#define SI4713_TX_COMPONENT_ENABLE 0x2100
#define SI4713_TX_AUDIO_DEVIATION 0x2101
#define SI4713_TX_PILOT_DEVIATION 0x2102
#define SI4713_TX_RDS_DEVIATION 0x2103
#define SI4713_TX_LINE_INPUT_LEVEL 0x2104
#define SI4713_TX_LINE_INPUT_MUTE 0x2105
#define SI4713_TX_PREEMPHASIS 0x2106
#define SI4713_TX_PILOT_FREQUENCY 0x2107
#define SI4713_TX_ACOMP_ENABLE 0x2200
#define SI4713_TX_ACOMP_THRESHOLD 0x2201
#define SI4713_TX_ACOMP_ATTACK_TIME 0x2202
#define SI4713_TX_ACOMP_RELEASE_TIME 0x2203
#define SI4713_TX_ACOMP_GAIN 0x2204
#define SI4713_TX_LIMITER_RELEASE_TIME 0x2205
#define SI4713_TX_ASQ_INTERRUPT_SOURCE 0x2300
#define SI4713_TX_ASQ_LEVEL_LOW 0x2301
#define SI4713_TX_ASQ_DURATION_LOW 0x2302
#define SI4713_TX_ASQ_LEVEL_HIGH 0x2303
#define SI4713_TX_ASQ_DURATION_HIGH 0x2304
#define SI4713_TX_RDS_INTERRUPT_SOURCE 0x2C00
#define SI4713_TX_RDS_PI 0x2C01
#define SI4713_TX_RDS_PS_MIX 0x2C02
#define SI4713_TX_RDS_PS_MISC 0x2C03
#define SI4713_TX_RDS_PS_REPEAT_COUNT 0x2C04
#define SI4713_TX_RDS_PS_MESSAGE_COUNT 0x2C05
#define SI4713_TX_RDS_PS_AF 0x2C06
#define SI4713_TX_RDS_FIFO_SIZE 0x2C07
#define PREEMPHASIS_USA 75
#define PREEMPHASIS_EU 50
#define PREEMPHASIS_DISABLED 0
#define FMPE_USA 0x00
#define FMPE_EU 0x01
#define FMPE_DISABLED 0x02
#define POWER_UP 0x01
#define POWER_DOWN 0x00
#define MAX_RDS_PTY 31
#define MAX_RDS_DEVIATION 90000
/*
* PSNAME is known to be defined as 8 character sized (RDS Spec).
* However, there is receivers which scroll PSNAME 8xN sized.
*/
#define MAX_RDS_PS_NAME 96
/*
* MAX_RDS_RADIO_TEXT is known to be defined as 32 (2A group) or 64 (2B group)
* character sized (RDS Spec).
* However, there is receivers which scroll them as well.
*/
#define MAX_RDS_RADIO_TEXT 384
#define MAX_LIMITER_RELEASE_TIME 102390
#define MAX_LIMITER_DEVIATION 90000
#define MAX_PILOT_DEVIATION 90000
#define MAX_PILOT_FREQUENCY 19000
#define MAX_ACOMP_RELEASE_TIME 1000000
#define MAX_ACOMP_ATTACK_TIME 5000
#define MAX_ACOMP_THRESHOLD 0
#define MIN_ACOMP_THRESHOLD (-40)
#define MAX_ACOMP_GAIN 20
/*
* si4713_device - private data
*/
struct si4713_device {
/* v4l2_subdev and i2c reference (v4l2_subdev priv data) */
struct v4l2_subdev sd;
struct v4l2_ctrl_handler ctrl_handler;
/* private data structures */
struct { /* si4713 control cluster */
/* This is one big cluster since the mute control
* powers off the device and after unmuting again all
* controls need to be set at once. The only way of doing
* that is by making it one big cluster. */
struct v4l2_ctrl *mute;
struct v4l2_ctrl *rds_ps_name;
struct v4l2_ctrl *rds_radio_text;
struct v4l2_ctrl *rds_pi;
struct v4l2_ctrl *rds_deviation;
struct v4l2_ctrl *rds_pty;
struct v4l2_ctrl *rds_compressed;
struct v4l2_ctrl *rds_art_head;
struct v4l2_ctrl *rds_stereo;
struct v4l2_ctrl *rds_ta;
struct v4l2_ctrl *rds_tp;
struct v4l2_ctrl *rds_ms;
struct v4l2_ctrl *rds_dyn_pty;
struct v4l2_ctrl *rds_alt_freqs_enable;
struct v4l2_ctrl *rds_alt_freqs;
struct v4l2_ctrl *compression_enabled;
struct v4l2_ctrl *compression_threshold;
struct v4l2_ctrl *compression_gain;
struct v4l2_ctrl *compression_attack_time;
struct v4l2_ctrl *compression_release_time;
struct v4l2_ctrl *pilot_tone_enabled;
struct v4l2_ctrl *pilot_tone_freq;
struct v4l2_ctrl *pilot_tone_deviation;
struct v4l2_ctrl *limiter_enabled;
struct v4l2_ctrl *limiter_deviation;
struct v4l2_ctrl *limiter_release_time;
struct v4l2_ctrl *tune_preemphasis;
struct v4l2_ctrl *tune_pwr_level;
struct v4l2_ctrl *tune_ant_cap;
};
struct completion work;
struct regulator *vdd;
struct regulator *vio;
struct gpio_desc *gpio_reset;
struct platform_device *pd;
u32 power_state;
u32 rds_enabled;
u32 frequency;
u32 preemphasis;
u32 stereo;
u32 tune_rnl;
};
struct radio_si4713_platform_data {
struct i2c_client *subdev;
};
#endif /* ifndef SI4713_I2C_H */