linux_dsm_epyc7002/drivers/gpu/drm/i915/intel_hdmi.c

1300 lines
37 KiB
C
Raw Normal View History

/*
* Copyright 2006 Dave Airlie <airlied@linux.ie>
* Copyright © 2006-2009 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Authors:
* Eric Anholt <eric@anholt.net>
* Jesse Barnes <jesse.barnes@intel.com>
*/
#include <linux/i2c.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 15:04:11 +07:00
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/hdmi.h>
#include <drm/drmP.h>
#include <drm/drm_crtc.h>
#include <drm/drm_edid.h>
#include "intel_drv.h"
#include <drm/i915_drm.h>
#include "i915_drv.h"
static struct drm_device *intel_hdmi_to_dev(struct intel_hdmi *intel_hdmi)
{
return hdmi_to_dig_port(intel_hdmi)->base.base.dev;
}
static void
assert_hdmi_port_disabled(struct intel_hdmi *intel_hdmi)
{
struct drm_device *dev = intel_hdmi_to_dev(intel_hdmi);
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t enabled_bits;
enabled_bits = HAS_DDI(dev) ? DDI_BUF_CTL_ENABLE : SDVO_ENABLE;
WARN(I915_READ(intel_hdmi->hdmi_reg) & enabled_bits,
"HDMI port enabled, expecting disabled\n");
}
struct intel_hdmi *enc_to_intel_hdmi(struct drm_encoder *encoder)
{
struct intel_digital_port *intel_dig_port =
container_of(encoder, struct intel_digital_port, base.base);
return &intel_dig_port->hdmi;
}
static struct intel_hdmi *intel_attached_hdmi(struct drm_connector *connector)
{
return enc_to_intel_hdmi(&intel_attached_encoder(connector)->base);
}
static u32 g4x_infoframe_index(enum hdmi_infoframe_type type)
{
switch (type) {
case HDMI_INFOFRAME_TYPE_AVI:
return VIDEO_DIP_SELECT_AVI;
case HDMI_INFOFRAME_TYPE_SPD:
return VIDEO_DIP_SELECT_SPD;
case HDMI_INFOFRAME_TYPE_VENDOR:
return VIDEO_DIP_SELECT_VENDOR;
default:
DRM_DEBUG_DRIVER("unknown info frame type %d\n", type);
return 0;
}
}
static u32 g4x_infoframe_enable(enum hdmi_infoframe_type type)
{
switch (type) {
case HDMI_INFOFRAME_TYPE_AVI:
return VIDEO_DIP_ENABLE_AVI;
case HDMI_INFOFRAME_TYPE_SPD:
return VIDEO_DIP_ENABLE_SPD;
case HDMI_INFOFRAME_TYPE_VENDOR:
return VIDEO_DIP_ENABLE_VENDOR;
default:
DRM_DEBUG_DRIVER("unknown info frame type %d\n", type);
return 0;
}
}
static u32 hsw_infoframe_enable(enum hdmi_infoframe_type type)
{
switch (type) {
case HDMI_INFOFRAME_TYPE_AVI:
return VIDEO_DIP_ENABLE_AVI_HSW;
case HDMI_INFOFRAME_TYPE_SPD:
return VIDEO_DIP_ENABLE_SPD_HSW;
case HDMI_INFOFRAME_TYPE_VENDOR:
return VIDEO_DIP_ENABLE_VS_HSW;
default:
DRM_DEBUG_DRIVER("unknown info frame type %d\n", type);
return 0;
}
}
static u32 hsw_infoframe_data_reg(enum hdmi_infoframe_type type,
enum transcoder cpu_transcoder,
struct drm_i915_private *dev_priv)
{
switch (type) {
case HDMI_INFOFRAME_TYPE_AVI:
return HSW_TVIDEO_DIP_AVI_DATA(cpu_transcoder);
case HDMI_INFOFRAME_TYPE_SPD:
return HSW_TVIDEO_DIP_SPD_DATA(cpu_transcoder);
case HDMI_INFOFRAME_TYPE_VENDOR:
return HSW_TVIDEO_DIP_VS_DATA(cpu_transcoder);
default:
DRM_DEBUG_DRIVER("unknown info frame type %d\n", type);
return 0;
}
}
static void g4x_write_infoframe(struct drm_encoder *encoder,
enum hdmi_infoframe_type type,
const void *frame, ssize_t len)
{
const uint32_t *data = frame;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 val = I915_READ(VIDEO_DIP_CTL);
int i;
WARN(!(val & VIDEO_DIP_ENABLE), "Writing DIP with CTL reg disabled\n");
val &= ~(VIDEO_DIP_SELECT_MASK | 0xf); /* clear DIP data offset */
val |= g4x_infoframe_index(type);
val &= ~g4x_infoframe_enable(type);
I915_WRITE(VIDEO_DIP_CTL, val);
mmiowb();
for (i = 0; i < len; i += 4) {
I915_WRITE(VIDEO_DIP_DATA, *data);
data++;
}
drm/i915: make sure we write all the DIP data bytes ... even if the actual infoframe is smaller than the maximum possible size. If we don't write all the 32 DIP data bytes the InfoFrame ECC may not be correctly calculated in some cases (e.g., when changing the port), and this will lead to black screens on HDMI monitors. The ECC value is generated by the hardware. I don't see how this should break anything since we're writing 0 and that should be the correct value, so this patch should be safe. Notice that on IVB and older we actually have 64 bytes available for VIDEO_DIP_DATA, but only bytes 0-31 actually store infoframe data: the others are either read-only ECC values or marked as "reserved". On HSW we only have 32 bytes, and the ECC value is stored on its own separate read-only register. See BSpec. This patch fixes bug #46761, which is marked as a regression introduced by commit 4e89ee174bb2da341bf90a84321c7008a3c9210d: drm/i915: set the DIP port on ibx_write_infoframe Before commit 4e89 we were just failing to send AVI infoframes when we needed to change the port, which can lead to black screens in some cases. After commit 4e89 we started sending infoframes, but with a possibly wrong ECC value. After this patch I hope we start sending correct infoframes. Version 2: - Improve commit message - Try to make the code more clear Cc: stable@vger.kernel.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=46761 Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-25 23:23:34 +07:00
/* Write every possible data byte to force correct ECC calculation. */
for (; i < VIDEO_DIP_DATA_SIZE; i += 4)
I915_WRITE(VIDEO_DIP_DATA, 0);
mmiowb();
val |= g4x_infoframe_enable(type);
val &= ~VIDEO_DIP_FREQ_MASK;
val |= VIDEO_DIP_FREQ_VSYNC;
I915_WRITE(VIDEO_DIP_CTL, val);
POSTING_READ(VIDEO_DIP_CTL);
}
static void ibx_write_infoframe(struct drm_encoder *encoder,
enum hdmi_infoframe_type type,
const void *frame, ssize_t len)
{
const uint32_t *data = frame;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
int i, reg = TVIDEO_DIP_CTL(intel_crtc->pipe);
u32 val = I915_READ(reg);
WARN(!(val & VIDEO_DIP_ENABLE), "Writing DIP with CTL reg disabled\n");
val &= ~(VIDEO_DIP_SELECT_MASK | 0xf); /* clear DIP data offset */
val |= g4x_infoframe_index(type);
val &= ~g4x_infoframe_enable(type);
I915_WRITE(reg, val);
mmiowb();
for (i = 0; i < len; i += 4) {
I915_WRITE(TVIDEO_DIP_DATA(intel_crtc->pipe), *data);
data++;
}
drm/i915: make sure we write all the DIP data bytes ... even if the actual infoframe is smaller than the maximum possible size. If we don't write all the 32 DIP data bytes the InfoFrame ECC may not be correctly calculated in some cases (e.g., when changing the port), and this will lead to black screens on HDMI monitors. The ECC value is generated by the hardware. I don't see how this should break anything since we're writing 0 and that should be the correct value, so this patch should be safe. Notice that on IVB and older we actually have 64 bytes available for VIDEO_DIP_DATA, but only bytes 0-31 actually store infoframe data: the others are either read-only ECC values or marked as "reserved". On HSW we only have 32 bytes, and the ECC value is stored on its own separate read-only register. See BSpec. This patch fixes bug #46761, which is marked as a regression introduced by commit 4e89ee174bb2da341bf90a84321c7008a3c9210d: drm/i915: set the DIP port on ibx_write_infoframe Before commit 4e89 we were just failing to send AVI infoframes when we needed to change the port, which can lead to black screens in some cases. After commit 4e89 we started sending infoframes, but with a possibly wrong ECC value. After this patch I hope we start sending correct infoframes. Version 2: - Improve commit message - Try to make the code more clear Cc: stable@vger.kernel.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=46761 Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-25 23:23:34 +07:00
/* Write every possible data byte to force correct ECC calculation. */
for (; i < VIDEO_DIP_DATA_SIZE; i += 4)
I915_WRITE(TVIDEO_DIP_DATA(intel_crtc->pipe), 0);
mmiowb();
val |= g4x_infoframe_enable(type);
val &= ~VIDEO_DIP_FREQ_MASK;
val |= VIDEO_DIP_FREQ_VSYNC;
I915_WRITE(reg, val);
POSTING_READ(reg);
}
static void cpt_write_infoframe(struct drm_encoder *encoder,
enum hdmi_infoframe_type type,
const void *frame, ssize_t len)
{
const uint32_t *data = frame;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
int i, reg = TVIDEO_DIP_CTL(intel_crtc->pipe);
u32 val = I915_READ(reg);
WARN(!(val & VIDEO_DIP_ENABLE), "Writing DIP with CTL reg disabled\n");
val &= ~(VIDEO_DIP_SELECT_MASK | 0xf); /* clear DIP data offset */
val |= g4x_infoframe_index(type);
/* The DIP control register spec says that we need to update the AVI
* infoframe without clearing its enable bit */
if (type != HDMI_INFOFRAME_TYPE_AVI)
val &= ~g4x_infoframe_enable(type);
I915_WRITE(reg, val);
mmiowb();
for (i = 0; i < len; i += 4) {
I915_WRITE(TVIDEO_DIP_DATA(intel_crtc->pipe), *data);
data++;
}
drm/i915: make sure we write all the DIP data bytes ... even if the actual infoframe is smaller than the maximum possible size. If we don't write all the 32 DIP data bytes the InfoFrame ECC may not be correctly calculated in some cases (e.g., when changing the port), and this will lead to black screens on HDMI monitors. The ECC value is generated by the hardware. I don't see how this should break anything since we're writing 0 and that should be the correct value, so this patch should be safe. Notice that on IVB and older we actually have 64 bytes available for VIDEO_DIP_DATA, but only bytes 0-31 actually store infoframe data: the others are either read-only ECC values or marked as "reserved". On HSW we only have 32 bytes, and the ECC value is stored on its own separate read-only register. See BSpec. This patch fixes bug #46761, which is marked as a regression introduced by commit 4e89ee174bb2da341bf90a84321c7008a3c9210d: drm/i915: set the DIP port on ibx_write_infoframe Before commit 4e89 we were just failing to send AVI infoframes when we needed to change the port, which can lead to black screens in some cases. After commit 4e89 we started sending infoframes, but with a possibly wrong ECC value. After this patch I hope we start sending correct infoframes. Version 2: - Improve commit message - Try to make the code more clear Cc: stable@vger.kernel.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=46761 Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-25 23:23:34 +07:00
/* Write every possible data byte to force correct ECC calculation. */
for (; i < VIDEO_DIP_DATA_SIZE; i += 4)
I915_WRITE(TVIDEO_DIP_DATA(intel_crtc->pipe), 0);
mmiowb();
val |= g4x_infoframe_enable(type);
val &= ~VIDEO_DIP_FREQ_MASK;
val |= VIDEO_DIP_FREQ_VSYNC;
I915_WRITE(reg, val);
POSTING_READ(reg);
}
static void vlv_write_infoframe(struct drm_encoder *encoder,
enum hdmi_infoframe_type type,
const void *frame, ssize_t len)
{
const uint32_t *data = frame;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
int i, reg = VLV_TVIDEO_DIP_CTL(intel_crtc->pipe);
u32 val = I915_READ(reg);
WARN(!(val & VIDEO_DIP_ENABLE), "Writing DIP with CTL reg disabled\n");
val &= ~(VIDEO_DIP_SELECT_MASK | 0xf); /* clear DIP data offset */
val |= g4x_infoframe_index(type);
val &= ~g4x_infoframe_enable(type);
I915_WRITE(reg, val);
mmiowb();
for (i = 0; i < len; i += 4) {
I915_WRITE(VLV_TVIDEO_DIP_DATA(intel_crtc->pipe), *data);
data++;
}
drm/i915: make sure we write all the DIP data bytes ... even if the actual infoframe is smaller than the maximum possible size. If we don't write all the 32 DIP data bytes the InfoFrame ECC may not be correctly calculated in some cases (e.g., when changing the port), and this will lead to black screens on HDMI monitors. The ECC value is generated by the hardware. I don't see how this should break anything since we're writing 0 and that should be the correct value, so this patch should be safe. Notice that on IVB and older we actually have 64 bytes available for VIDEO_DIP_DATA, but only bytes 0-31 actually store infoframe data: the others are either read-only ECC values or marked as "reserved". On HSW we only have 32 bytes, and the ECC value is stored on its own separate read-only register. See BSpec. This patch fixes bug #46761, which is marked as a regression introduced by commit 4e89ee174bb2da341bf90a84321c7008a3c9210d: drm/i915: set the DIP port on ibx_write_infoframe Before commit 4e89 we were just failing to send AVI infoframes when we needed to change the port, which can lead to black screens in some cases. After commit 4e89 we started sending infoframes, but with a possibly wrong ECC value. After this patch I hope we start sending correct infoframes. Version 2: - Improve commit message - Try to make the code more clear Cc: stable@vger.kernel.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=46761 Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-25 23:23:34 +07:00
/* Write every possible data byte to force correct ECC calculation. */
for (; i < VIDEO_DIP_DATA_SIZE; i += 4)
I915_WRITE(VLV_TVIDEO_DIP_DATA(intel_crtc->pipe), 0);
mmiowb();
val |= g4x_infoframe_enable(type);
val &= ~VIDEO_DIP_FREQ_MASK;
val |= VIDEO_DIP_FREQ_VSYNC;
I915_WRITE(reg, val);
POSTING_READ(reg);
}
static void hsw_write_infoframe(struct drm_encoder *encoder,
enum hdmi_infoframe_type type,
const void *frame, ssize_t len)
{
const uint32_t *data = frame;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
u32 ctl_reg = HSW_TVIDEO_DIP_CTL(intel_crtc->config.cpu_transcoder);
u32 data_reg;
int i;
u32 val = I915_READ(ctl_reg);
data_reg = hsw_infoframe_data_reg(type,
intel_crtc->config.cpu_transcoder,
dev_priv);
if (data_reg == 0)
return;
val &= ~hsw_infoframe_enable(type);
I915_WRITE(ctl_reg, val);
mmiowb();
for (i = 0; i < len; i += 4) {
I915_WRITE(data_reg + i, *data);
data++;
}
drm/i915: make sure we write all the DIP data bytes ... even if the actual infoframe is smaller than the maximum possible size. If we don't write all the 32 DIP data bytes the InfoFrame ECC may not be correctly calculated in some cases (e.g., when changing the port), and this will lead to black screens on HDMI monitors. The ECC value is generated by the hardware. I don't see how this should break anything since we're writing 0 and that should be the correct value, so this patch should be safe. Notice that on IVB and older we actually have 64 bytes available for VIDEO_DIP_DATA, but only bytes 0-31 actually store infoframe data: the others are either read-only ECC values or marked as "reserved". On HSW we only have 32 bytes, and the ECC value is stored on its own separate read-only register. See BSpec. This patch fixes bug #46761, which is marked as a regression introduced by commit 4e89ee174bb2da341bf90a84321c7008a3c9210d: drm/i915: set the DIP port on ibx_write_infoframe Before commit 4e89 we were just failing to send AVI infoframes when we needed to change the port, which can lead to black screens in some cases. After commit 4e89 we started sending infoframes, but with a possibly wrong ECC value. After this patch I hope we start sending correct infoframes. Version 2: - Improve commit message - Try to make the code more clear Cc: stable@vger.kernel.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=46761 Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-25 23:23:34 +07:00
/* Write every possible data byte to force correct ECC calculation. */
for (; i < VIDEO_DIP_DATA_SIZE; i += 4)
I915_WRITE(data_reg + i, 0);
mmiowb();
val |= hsw_infoframe_enable(type);
I915_WRITE(ctl_reg, val);
POSTING_READ(ctl_reg);
}
/*
* The data we write to the DIP data buffer registers is 1 byte bigger than the
* HDMI infoframe size because of an ECC/reserved byte at position 3 (starting
* at 0). It's also a byte used by DisplayPort so the same DIP registers can be
* used for both technologies.
*
* DW0: Reserved/ECC/DP | HB2 | HB1 | HB0
* DW1: DB3 | DB2 | DB1 | DB0
* DW2: DB7 | DB6 | DB5 | DB4
* DW3: ...
*
* (HB is Header Byte, DB is Data Byte)
*
* The hdmi pack() functions don't know about that hardware specific hole so we
* trick them by giving an offset into the buffer and moving back the header
* bytes by one.
*/
static void intel_write_infoframe(struct drm_encoder *encoder,
union hdmi_infoframe *frame)
{
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
uint8_t buffer[VIDEO_DIP_DATA_SIZE];
ssize_t len;
/* see comment above for the reason for this offset */
len = hdmi_infoframe_pack(frame, buffer + 1, sizeof(buffer) - 1);
if (len < 0)
return;
/* Insert the 'hole' (see big comment above) at position 3 */
buffer[0] = buffer[1];
buffer[1] = buffer[2];
buffer[2] = buffer[3];
buffer[3] = 0;
len++;
intel_hdmi->write_infoframe(encoder, frame->any.type, buffer, len);
}
static void intel_hdmi_set_avi_infoframe(struct drm_encoder *encoder,
struct drm_display_mode *adjusted_mode)
{
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
union hdmi_infoframe frame;
int ret;
ret = drm_hdmi_avi_infoframe_from_display_mode(&frame.avi,
adjusted_mode);
if (ret < 0) {
DRM_ERROR("couldn't fill AVI infoframe\n");
return;
}
if (intel_hdmi->rgb_quant_range_selectable) {
if (intel_crtc->config.limited_color_range)
frame.avi.quantization_range =
HDMI_QUANTIZATION_RANGE_LIMITED;
else
frame.avi.quantization_range =
HDMI_QUANTIZATION_RANGE_FULL;
}
intel_write_infoframe(encoder, &frame);
}
static void intel_hdmi_set_spd_infoframe(struct drm_encoder *encoder)
{
union hdmi_infoframe frame;
int ret;
ret = hdmi_spd_infoframe_init(&frame.spd, "Intel", "Integrated gfx");
if (ret < 0) {
DRM_ERROR("couldn't fill SPD infoframe\n");
return;
}
frame.spd.sdi = HDMI_SPD_SDI_PC;
intel_write_infoframe(encoder, &frame);
}
static void
intel_hdmi_set_hdmi_infoframe(struct drm_encoder *encoder,
struct drm_display_mode *adjusted_mode)
{
union hdmi_infoframe frame;
int ret;
ret = drm_hdmi_vendor_infoframe_from_display_mode(&frame.vendor.hdmi,
adjusted_mode);
if (ret < 0)
return;
intel_write_infoframe(encoder, &frame);
}
static void g4x_set_infoframes(struct drm_encoder *encoder,
struct drm_display_mode *adjusted_mode)
{
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
struct drm_i915_private *dev_priv = encoder->dev->dev_private;
struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder);
struct intel_hdmi *intel_hdmi = &intel_dig_port->hdmi;
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
u32 reg = VIDEO_DIP_CTL;
u32 val = I915_READ(reg);
u32 port = VIDEO_DIP_PORT(intel_dig_port->port);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
assert_hdmi_port_disabled(intel_hdmi);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
/* If the registers were not initialized yet, they might be zeroes,
* which means we're selecting the AVI DIP and we're setting its
* frequency to once. This seems to really confuse the HW and make
* things stop working (the register spec says the AVI always needs to
* be sent every VSync). So here we avoid writing to the register more
* than we need and also explicitly select the AVI DIP and explicitly
* set its frequency to every VSync. Avoiding to write it twice seems to
* be enough to solve the problem, but being defensive shouldn't hurt us
* either. */
val |= VIDEO_DIP_SELECT_AVI | VIDEO_DIP_FREQ_VSYNC;
if (!intel_hdmi->has_hdmi_sink) {
if (!(val & VIDEO_DIP_ENABLE))
return;
val &= ~VIDEO_DIP_ENABLE;
I915_WRITE(reg, val);
POSTING_READ(reg);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
return;
}
if (port != (val & VIDEO_DIP_PORT_MASK)) {
if (val & VIDEO_DIP_ENABLE) {
val &= ~VIDEO_DIP_ENABLE;
I915_WRITE(reg, val);
POSTING_READ(reg);
}
val &= ~VIDEO_DIP_PORT_MASK;
val |= port;
}
val |= VIDEO_DIP_ENABLE;
val &= ~VIDEO_DIP_ENABLE_VENDOR;
I915_WRITE(reg, val);
POSTING_READ(reg);
intel_hdmi_set_avi_infoframe(encoder, adjusted_mode);
intel_hdmi_set_spd_infoframe(encoder);
intel_hdmi_set_hdmi_infoframe(encoder, adjusted_mode);
}
static void ibx_set_infoframes(struct drm_encoder *encoder,
struct drm_display_mode *adjusted_mode)
{
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
struct drm_i915_private *dev_priv = encoder->dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder);
struct intel_hdmi *intel_hdmi = &intel_dig_port->hdmi;
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
u32 reg = TVIDEO_DIP_CTL(intel_crtc->pipe);
u32 val = I915_READ(reg);
u32 port = VIDEO_DIP_PORT(intel_dig_port->port);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
assert_hdmi_port_disabled(intel_hdmi);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
/* See the big comment in g4x_set_infoframes() */
val |= VIDEO_DIP_SELECT_AVI | VIDEO_DIP_FREQ_VSYNC;
if (!intel_hdmi->has_hdmi_sink) {
if (!(val & VIDEO_DIP_ENABLE))
return;
val &= ~VIDEO_DIP_ENABLE;
I915_WRITE(reg, val);
POSTING_READ(reg);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
return;
}
if (port != (val & VIDEO_DIP_PORT_MASK)) {
if (val & VIDEO_DIP_ENABLE) {
val &= ~VIDEO_DIP_ENABLE;
I915_WRITE(reg, val);
POSTING_READ(reg);
}
val &= ~VIDEO_DIP_PORT_MASK;
val |= port;
}
val |= VIDEO_DIP_ENABLE;
val &= ~(VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
VIDEO_DIP_ENABLE_GCP);
I915_WRITE(reg, val);
POSTING_READ(reg);
intel_hdmi_set_avi_infoframe(encoder, adjusted_mode);
intel_hdmi_set_spd_infoframe(encoder);
intel_hdmi_set_hdmi_infoframe(encoder, adjusted_mode);
}
static void cpt_set_infoframes(struct drm_encoder *encoder,
struct drm_display_mode *adjusted_mode)
{
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
struct drm_i915_private *dev_priv = encoder->dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
u32 reg = TVIDEO_DIP_CTL(intel_crtc->pipe);
u32 val = I915_READ(reg);
assert_hdmi_port_disabled(intel_hdmi);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
/* See the big comment in g4x_set_infoframes() */
val |= VIDEO_DIP_SELECT_AVI | VIDEO_DIP_FREQ_VSYNC;
if (!intel_hdmi->has_hdmi_sink) {
if (!(val & VIDEO_DIP_ENABLE))
return;
val &= ~(VIDEO_DIP_ENABLE | VIDEO_DIP_ENABLE_AVI);
I915_WRITE(reg, val);
POSTING_READ(reg);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
return;
}
/* Set both together, unset both together: see the spec. */
val |= VIDEO_DIP_ENABLE | VIDEO_DIP_ENABLE_AVI;
val &= ~(VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
VIDEO_DIP_ENABLE_GCP);
I915_WRITE(reg, val);
POSTING_READ(reg);
intel_hdmi_set_avi_infoframe(encoder, adjusted_mode);
intel_hdmi_set_spd_infoframe(encoder);
intel_hdmi_set_hdmi_infoframe(encoder, adjusted_mode);
}
static void vlv_set_infoframes(struct drm_encoder *encoder,
struct drm_display_mode *adjusted_mode)
{
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
struct drm_i915_private *dev_priv = encoder->dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
u32 reg = VLV_TVIDEO_DIP_CTL(intel_crtc->pipe);
u32 val = I915_READ(reg);
assert_hdmi_port_disabled(intel_hdmi);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
/* See the big comment in g4x_set_infoframes() */
val |= VIDEO_DIP_SELECT_AVI | VIDEO_DIP_FREQ_VSYNC;
if (!intel_hdmi->has_hdmi_sink) {
if (!(val & VIDEO_DIP_ENABLE))
return;
val &= ~VIDEO_DIP_ENABLE;
I915_WRITE(reg, val);
POSTING_READ(reg);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
return;
}
val |= VIDEO_DIP_ENABLE;
val &= ~(VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
VIDEO_DIP_ENABLE_GCP);
I915_WRITE(reg, val);
POSTING_READ(reg);
intel_hdmi_set_avi_infoframe(encoder, adjusted_mode);
intel_hdmi_set_spd_infoframe(encoder);
intel_hdmi_set_hdmi_infoframe(encoder, adjusted_mode);
}
static void hsw_set_infoframes(struct drm_encoder *encoder,
struct drm_display_mode *adjusted_mode)
{
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
struct drm_i915_private *dev_priv = encoder->dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
u32 reg = HSW_TVIDEO_DIP_CTL(intel_crtc->config.cpu_transcoder);
u32 val = I915_READ(reg);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
assert_hdmi_port_disabled(intel_hdmi);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
if (!intel_hdmi->has_hdmi_sink) {
I915_WRITE(reg, 0);
POSTING_READ(reg);
drm/i915: properly alternate between DVI and HDMI This solves problems that happen when you alternate between HDMI and DVI on the same port. I can reproduce these problems using DP->HDMI and DP->DVI adapters on a DP port. When you first plug HDMI and then plug DVI, you need to stop sending DIPs, even if the port is in DVI mode (see the HDMI register spec). If you don't stop sending DIPs, you'll see a pink vertical line on the left side of the screen, some modes will give you a black screen, some modes won't work correctly. When you first plug DVI and then plug HDMI, you need to properly enable the DIPs, otherwise the HW won't send them. After spending a lot of time investigating this, I concluded that if the DIPs are disabled, we should not write to the DIP register again because when we do this, we also set the AVI InfoFrame frequency to "once", and this seems to really confuse our hardware. Since this problem was not exactly easy to debug, I'm adopting the defensive behavior and not just avoing the "disable twice" sequence, but also explicitly selecting the AVI InfoFrame and setting its frequency to a correct one. Also, move the "is_dvi" check from intel_set_infoframe to the set_infoframes functions since now they're going to be the first ones to deal with the DIP registers. This patch adds the code to fix the problem, but it depends on the removal of some code that can't be removed right now and will come later in the patch series. The patch that we need is: - drm/i915: don't write 0 to DIP control at HDMI init [danvet: Paulo clarified that this additional patch is only required to make the fix complete, this patch here alone doesn't introduce a regression but only partially solves the problem of randomly clearing the dip registers.] V2: Be even more defensive by selecting AVI and setting its frequency outside the "is_dvi" check. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-29 02:42:49 +07:00
return;
}
val &= ~(VIDEO_DIP_ENABLE_VSC_HSW | VIDEO_DIP_ENABLE_GCP_HSW |
VIDEO_DIP_ENABLE_VS_HSW | VIDEO_DIP_ENABLE_GMP_HSW);
I915_WRITE(reg, val);
POSTING_READ(reg);
intel_hdmi_set_avi_infoframe(encoder, adjusted_mode);
intel_hdmi_set_spd_infoframe(encoder);
intel_hdmi_set_hdmi_infoframe(encoder, adjusted_mode);
}
static void intel_hdmi_mode_set(struct intel_encoder *encoder)
{
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
struct drm_display_mode *adjusted_mode = &crtc->config.adjusted_mode;
u32 hdmi_val;
hdmi_val = SDVO_ENCODING_HDMI;
if (!HAS_PCH_SPLIT(dev))
hdmi_val |= intel_hdmi->color_range;
if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
hdmi_val |= SDVO_VSYNC_ACTIVE_HIGH;
if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
hdmi_val |= SDVO_HSYNC_ACTIVE_HIGH;
if (crtc->config.pipe_bpp > 24)
hdmi_val |= HDMI_COLOR_FORMAT_12bpc;
else
hdmi_val |= SDVO_COLOR_FORMAT_8bpc;
/* Required on CPT */
if (intel_hdmi->has_hdmi_sink && HAS_PCH_CPT(dev))
hdmi_val |= HDMI_MODE_SELECT_HDMI;
if (intel_hdmi->has_audio) {
drm/i915: pass ELD to HDMI/DP audio driver Add ELD support for Intel Eaglelake, IbexPeak/Ironlake, SandyBridge/CougarPoint and IvyBridge/PantherPoint chips. ELD (EDID-Like Data) describes to the HDMI/DP audio driver the audio capabilities of the plugged monitor. It's built and passed to audio driver in 2 steps: (1) at get_modes time, parse EDID and save ELD to drm_connector.eld[] (2) at mode_set time, write drm_connector.eld[] to the Transcoder's hw ELD buffer and set the ELD_valid bit to inform HDMI/DP audio driver This patch is tested OK on G45/HDMI, IbexPeak/HDMI and IvyBridge/HDMI+DP. Test scheme: plug in the HDMI/DP monitor, and run cat /proc/asound/card0/eld* to check if the monitor name, HDMI/DP type, etc. show up correctly. Minor imperfection: the GEN5_AUD_CNTL_ST/DIP_Port_Select field always reads 0 (reserved). Without knowing the port number, I worked it around by setting the ELD_valid bit for ALL the three ports. It's tested to not be a problem, because the audio driver will find invalid ELD data and hence rightfully abort, even when it sees the ELD_valid indicator. Thanks to Zhenyu and Pierre-Louis for a lot of valuable help and testing. CC: Zhao Yakui <yakui.zhao@intel.com> CC: Wang Zhenyu <zhenyu.z.wang@intel.com> CC: Jeremy Bush <contractfrombelow@gmail.com> CC: Christopher White <c.white@pulseforce.com> CC: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> CC: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-05 13:25:34 +07:00
DRM_DEBUG_DRIVER("Enabling HDMI audio on pipe %c\n",
pipe_name(crtc->pipe));
hdmi_val |= SDVO_AUDIO_ENABLE;
hdmi_val |= HDMI_MODE_SELECT_HDMI;
intel_write_eld(&encoder->base, adjusted_mode);
}
if (HAS_PCH_CPT(dev))
hdmi_val |= SDVO_PIPE_SEL_CPT(crtc->pipe);
else
hdmi_val |= SDVO_PIPE_SEL(crtc->pipe);
I915_WRITE(intel_hdmi->hdmi_reg, hdmi_val);
POSTING_READ(intel_hdmi->hdmi_reg);
intel_hdmi->set_infoframes(&encoder->base, adjusted_mode);
}
static bool intel_hdmi_get_hw_state(struct intel_encoder *encoder,
enum pipe *pipe)
{
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
u32 tmp;
tmp = I915_READ(intel_hdmi->hdmi_reg);
if (!(tmp & SDVO_ENABLE))
return false;
if (HAS_PCH_CPT(dev))
*pipe = PORT_TO_PIPE_CPT(tmp);
else
*pipe = PORT_TO_PIPE(tmp);
return true;
}
static void intel_hdmi_get_config(struct intel_encoder *encoder,
struct intel_crtc_config *pipe_config)
{
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
u32 tmp, flags = 0;
int dotclock;
tmp = I915_READ(intel_hdmi->hdmi_reg);
if (tmp & SDVO_HSYNC_ACTIVE_HIGH)
flags |= DRM_MODE_FLAG_PHSYNC;
else
flags |= DRM_MODE_FLAG_NHSYNC;
if (tmp & SDVO_VSYNC_ACTIVE_HIGH)
flags |= DRM_MODE_FLAG_PVSYNC;
else
flags |= DRM_MODE_FLAG_NVSYNC;
pipe_config->adjusted_mode.flags |= flags;
if ((tmp & SDVO_COLOR_FORMAT_MASK) == HDMI_COLOR_FORMAT_12bpc)
dotclock = pipe_config->port_clock * 2 / 3;
else
dotclock = pipe_config->port_clock;
if (HAS_PCH_SPLIT(dev_priv->dev))
ironlake_check_encoder_dotclock(pipe_config, dotclock);
pipe_config->adjusted_mode.crtc_clock = dotclock;
}
drm/i915/hdmi: convert to encoder->disable/enable I've picked hdmi as the first encoder to convert because it's rather simple: - no cloning possible - no differences between prepare/commit and dpms off/on switching. A few changes are required to do so: - Split up the dpms code into an enable/disable function and wire it up with the intel encoder. - Noop out the existing encoder prepare/commit functions used by the crtc helper - our crtc enable/disable code now calls back into the encoder enable/disable code at the right spot. - Create new helper functions to handle dpms changes. - Add intel_encoder->connectors_active to better track dpms state. Atm this is unused, but it will be useful to correctly disable the entire display pipe for cloned configurations. Also note that for now this is only useful in the dpms code - thanks to the crtc helper's dpms confusion across a modeset operation we can't (yet) rely on this having a sensible value in all circumstances. - Rip out the encoder helper dpms callback, if this is still getting called somewhere we have a bug. The slight issue with that is that the crtc helper abuses dpms off to disable unused functions. Hence we also need to implement a default encoder disable function to do just that with the new encoder->disable callback. - Note that we drop the cpt modeset verification in the commit callback, too. The right place to do this would be in the crtc's enable function, _after_ all the encoders are set up. But because not all encoders are converted yet, we can't do that. Hence disable this check temporarily as a minor concession to bisectability. v2: Squash the dpms mode to only the supported values - connector->dpms is for internal tracking only, we can hence avoid needless state-changes a bit whithout causing harm. v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-30 13:59:56 +07:00
static void intel_enable_hdmi(struct intel_encoder *encoder)
{
drm/i915/hdmi: convert to encoder->disable/enable I've picked hdmi as the first encoder to convert because it's rather simple: - no cloning possible - no differences between prepare/commit and dpms off/on switching. A few changes are required to do so: - Split up the dpms code into an enable/disable function and wire it up with the intel encoder. - Noop out the existing encoder prepare/commit functions used by the crtc helper - our crtc enable/disable code now calls back into the encoder enable/disable code at the right spot. - Create new helper functions to handle dpms changes. - Add intel_encoder->connectors_active to better track dpms state. Atm this is unused, but it will be useful to correctly disable the entire display pipe for cloned configurations. Also note that for now this is only useful in the dpms code - thanks to the crtc helper's dpms confusion across a modeset operation we can't (yet) rely on this having a sensible value in all circumstances. - Rip out the encoder helper dpms callback, if this is still getting called somewhere we have a bug. The slight issue with that is that the crtc helper abuses dpms off to disable unused functions. Hence we also need to implement a default encoder disable function to do just that with the new encoder->disable callback. - Note that we drop the cpt modeset verification in the commit callback, too. The right place to do this would be in the crtc's enable function, _after_ all the encoders are set up. But because not all encoders are converted yet, we can't do that. Hence disable this check temporarily as a minor concession to bisectability. v2: Squash the dpms mode to only the supported values - connector->dpms is for internal tracking only, we can hence avoid needless state-changes a bit whithout causing harm. v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-30 13:59:56 +07:00
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
drm/i915/hdmi: convert to encoder->disable/enable I've picked hdmi as the first encoder to convert because it's rather simple: - no cloning possible - no differences between prepare/commit and dpms off/on switching. A few changes are required to do so: - Split up the dpms code into an enable/disable function and wire it up with the intel encoder. - Noop out the existing encoder prepare/commit functions used by the crtc helper - our crtc enable/disable code now calls back into the encoder enable/disable code at the right spot. - Create new helper functions to handle dpms changes. - Add intel_encoder->connectors_active to better track dpms state. Atm this is unused, but it will be useful to correctly disable the entire display pipe for cloned configurations. Also note that for now this is only useful in the dpms code - thanks to the crtc helper's dpms confusion across a modeset operation we can't (yet) rely on this having a sensible value in all circumstances. - Rip out the encoder helper dpms callback, if this is still getting called somewhere we have a bug. The slight issue with that is that the crtc helper abuses dpms off to disable unused functions. Hence we also need to implement a default encoder disable function to do just that with the new encoder->disable callback. - Note that we drop the cpt modeset verification in the commit callback, too. The right place to do this would be in the crtc's enable function, _after_ all the encoders are set up. But because not all encoders are converted yet, we can't do that. Hence disable this check temporarily as a minor concession to bisectability. v2: Squash the dpms mode to only the supported values - connector->dpms is for internal tracking only, we can hence avoid needless state-changes a bit whithout causing harm. v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-30 13:59:56 +07:00
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
u32 temp;
u32 enable_bits = SDVO_ENABLE;
if (intel_hdmi->has_audio)
enable_bits |= SDVO_AUDIO_ENABLE;
temp = I915_READ(intel_hdmi->hdmi_reg);
/* HW workaround for IBX, we need to move the port to transcoder A
* before disabling it, so restore the transcoder select bit here. */
if (HAS_PCH_IBX(dev))
enable_bits |= SDVO_PIPE_SEL(intel_crtc->pipe);
/* HW workaround, need to toggle enable bit off and on for 12bpc, but
* we do this anyway which shows more stable in testing.
*/
if (HAS_PCH_SPLIT(dev)) {
I915_WRITE(intel_hdmi->hdmi_reg, temp & ~SDVO_ENABLE);
POSTING_READ(intel_hdmi->hdmi_reg);
}
drm/i915/hdmi: convert to encoder->disable/enable I've picked hdmi as the first encoder to convert because it's rather simple: - no cloning possible - no differences between prepare/commit and dpms off/on switching. A few changes are required to do so: - Split up the dpms code into an enable/disable function and wire it up with the intel encoder. - Noop out the existing encoder prepare/commit functions used by the crtc helper - our crtc enable/disable code now calls back into the encoder enable/disable code at the right spot. - Create new helper functions to handle dpms changes. - Add intel_encoder->connectors_active to better track dpms state. Atm this is unused, but it will be useful to correctly disable the entire display pipe for cloned configurations. Also note that for now this is only useful in the dpms code - thanks to the crtc helper's dpms confusion across a modeset operation we can't (yet) rely on this having a sensible value in all circumstances. - Rip out the encoder helper dpms callback, if this is still getting called somewhere we have a bug. The slight issue with that is that the crtc helper abuses dpms off to disable unused functions. Hence we also need to implement a default encoder disable function to do just that with the new encoder->disable callback. - Note that we drop the cpt modeset verification in the commit callback, too. The right place to do this would be in the crtc's enable function, _after_ all the encoders are set up. But because not all encoders are converted yet, we can't do that. Hence disable this check temporarily as a minor concession to bisectability. v2: Squash the dpms mode to only the supported values - connector->dpms is for internal tracking only, we can hence avoid needless state-changes a bit whithout causing harm. v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-30 13:59:56 +07:00
temp |= enable_bits;
I915_WRITE(intel_hdmi->hdmi_reg, temp);
POSTING_READ(intel_hdmi->hdmi_reg);
drm/i915/hdmi: convert to encoder->disable/enable I've picked hdmi as the first encoder to convert because it's rather simple: - no cloning possible - no differences between prepare/commit and dpms off/on switching. A few changes are required to do so: - Split up the dpms code into an enable/disable function and wire it up with the intel encoder. - Noop out the existing encoder prepare/commit functions used by the crtc helper - our crtc enable/disable code now calls back into the encoder enable/disable code at the right spot. - Create new helper functions to handle dpms changes. - Add intel_encoder->connectors_active to better track dpms state. Atm this is unused, but it will be useful to correctly disable the entire display pipe for cloned configurations. Also note that for now this is only useful in the dpms code - thanks to the crtc helper's dpms confusion across a modeset operation we can't (yet) rely on this having a sensible value in all circumstances. - Rip out the encoder helper dpms callback, if this is still getting called somewhere we have a bug. The slight issue with that is that the crtc helper abuses dpms off to disable unused functions. Hence we also need to implement a default encoder disable function to do just that with the new encoder->disable callback. - Note that we drop the cpt modeset verification in the commit callback, too. The right place to do this would be in the crtc's enable function, _after_ all the encoders are set up. But because not all encoders are converted yet, we can't do that. Hence disable this check temporarily as a minor concession to bisectability. v2: Squash the dpms mode to only the supported values - connector->dpms is for internal tracking only, we can hence avoid needless state-changes a bit whithout causing harm. v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-30 13:59:56 +07:00
/* HW workaround, need to write this twice for issue that may result
* in first write getting masked.
*/
if (HAS_PCH_SPLIT(dev)) {
I915_WRITE(intel_hdmi->hdmi_reg, temp);
POSTING_READ(intel_hdmi->hdmi_reg);
}
}
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 04:51:36 +07:00
static void vlv_enable_hdmi(struct intel_encoder *encoder)
{
drm/i915/hdmi: convert to encoder->disable/enable I've picked hdmi as the first encoder to convert because it's rather simple: - no cloning possible - no differences between prepare/commit and dpms off/on switching. A few changes are required to do so: - Split up the dpms code into an enable/disable function and wire it up with the intel encoder. - Noop out the existing encoder prepare/commit functions used by the crtc helper - our crtc enable/disable code now calls back into the encoder enable/disable code at the right spot. - Create new helper functions to handle dpms changes. - Add intel_encoder->connectors_active to better track dpms state. Atm this is unused, but it will be useful to correctly disable the entire display pipe for cloned configurations. Also note that for now this is only useful in the dpms code - thanks to the crtc helper's dpms confusion across a modeset operation we can't (yet) rely on this having a sensible value in all circumstances. - Rip out the encoder helper dpms callback, if this is still getting called somewhere we have a bug. The slight issue with that is that the crtc helper abuses dpms off to disable unused functions. Hence we also need to implement a default encoder disable function to do just that with the new encoder->disable callback. - Note that we drop the cpt modeset verification in the commit callback, too. The right place to do this would be in the crtc's enable function, _after_ all the encoders are set up. But because not all encoders are converted yet, we can't do that. Hence disable this check temporarily as a minor concession to bisectability. v2: Squash the dpms mode to only the supported values - connector->dpms is for internal tracking only, we can hence avoid needless state-changes a bit whithout causing harm. v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-30 13:59:56 +07:00
}
static void intel_disable_hdmi(struct intel_encoder *encoder)
{
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
u32 temp;
u32 enable_bits = SDVO_ENABLE | SDVO_AUDIO_ENABLE;
drm/i915/hdmi: convert to encoder->disable/enable I've picked hdmi as the first encoder to convert because it's rather simple: - no cloning possible - no differences between prepare/commit and dpms off/on switching. A few changes are required to do so: - Split up the dpms code into an enable/disable function and wire it up with the intel encoder. - Noop out the existing encoder prepare/commit functions used by the crtc helper - our crtc enable/disable code now calls back into the encoder enable/disable code at the right spot. - Create new helper functions to handle dpms changes. - Add intel_encoder->connectors_active to better track dpms state. Atm this is unused, but it will be useful to correctly disable the entire display pipe for cloned configurations. Also note that for now this is only useful in the dpms code - thanks to the crtc helper's dpms confusion across a modeset operation we can't (yet) rely on this having a sensible value in all circumstances. - Rip out the encoder helper dpms callback, if this is still getting called somewhere we have a bug. The slight issue with that is that the crtc helper abuses dpms off to disable unused functions. Hence we also need to implement a default encoder disable function to do just that with the new encoder->disable callback. - Note that we drop the cpt modeset verification in the commit callback, too. The right place to do this would be in the crtc's enable function, _after_ all the encoders are set up. But because not all encoders are converted yet, we can't do that. Hence disable this check temporarily as a minor concession to bisectability. v2: Squash the dpms mode to only the supported values - connector->dpms is for internal tracking only, we can hence avoid needless state-changes a bit whithout causing harm. v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-30 13:59:56 +07:00
temp = I915_READ(intel_hdmi->hdmi_reg);
drm/i915/hdmi: convert to encoder->disable/enable I've picked hdmi as the first encoder to convert because it's rather simple: - no cloning possible - no differences between prepare/commit and dpms off/on switching. A few changes are required to do so: - Split up the dpms code into an enable/disable function and wire it up with the intel encoder. - Noop out the existing encoder prepare/commit functions used by the crtc helper - our crtc enable/disable code now calls back into the encoder enable/disable code at the right spot. - Create new helper functions to handle dpms changes. - Add intel_encoder->connectors_active to better track dpms state. Atm this is unused, but it will be useful to correctly disable the entire display pipe for cloned configurations. Also note that for now this is only useful in the dpms code - thanks to the crtc helper's dpms confusion across a modeset operation we can't (yet) rely on this having a sensible value in all circumstances. - Rip out the encoder helper dpms callback, if this is still getting called somewhere we have a bug. The slight issue with that is that the crtc helper abuses dpms off to disable unused functions. Hence we also need to implement a default encoder disable function to do just that with the new encoder->disable callback. - Note that we drop the cpt modeset verification in the commit callback, too. The right place to do this would be in the crtc's enable function, _after_ all the encoders are set up. But because not all encoders are converted yet, we can't do that. Hence disable this check temporarily as a minor concession to bisectability. v2: Squash the dpms mode to only the supported values - connector->dpms is for internal tracking only, we can hence avoid needless state-changes a bit whithout causing harm. v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-30 13:59:56 +07:00
/* HW workaround for IBX, we need to move the port to transcoder A
* before disabling it. */
if (HAS_PCH_IBX(dev)) {
struct drm_crtc *crtc = encoder->base.crtc;
int pipe = crtc ? to_intel_crtc(crtc)->pipe : -1;
if (temp & SDVO_PIPE_B_SELECT) {
temp &= ~SDVO_PIPE_B_SELECT;
I915_WRITE(intel_hdmi->hdmi_reg, temp);
POSTING_READ(intel_hdmi->hdmi_reg);
drm/i915/hdmi: convert to encoder->disable/enable I've picked hdmi as the first encoder to convert because it's rather simple: - no cloning possible - no differences between prepare/commit and dpms off/on switching. A few changes are required to do so: - Split up the dpms code into an enable/disable function and wire it up with the intel encoder. - Noop out the existing encoder prepare/commit functions used by the crtc helper - our crtc enable/disable code now calls back into the encoder enable/disable code at the right spot. - Create new helper functions to handle dpms changes. - Add intel_encoder->connectors_active to better track dpms state. Atm this is unused, but it will be useful to correctly disable the entire display pipe for cloned configurations. Also note that for now this is only useful in the dpms code - thanks to the crtc helper's dpms confusion across a modeset operation we can't (yet) rely on this having a sensible value in all circumstances. - Rip out the encoder helper dpms callback, if this is still getting called somewhere we have a bug. The slight issue with that is that the crtc helper abuses dpms off to disable unused functions. Hence we also need to implement a default encoder disable function to do just that with the new encoder->disable callback. - Note that we drop the cpt modeset verification in the commit callback, too. The right place to do this would be in the crtc's enable function, _after_ all the encoders are set up. But because not all encoders are converted yet, we can't do that. Hence disable this check temporarily as a minor concession to bisectability. v2: Squash the dpms mode to only the supported values - connector->dpms is for internal tracking only, we can hence avoid needless state-changes a bit whithout causing harm. v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-30 13:59:56 +07:00
/* Again we need to write this twice. */
I915_WRITE(intel_hdmi->hdmi_reg, temp);
POSTING_READ(intel_hdmi->hdmi_reg);
drm/i915/hdmi: convert to encoder->disable/enable I've picked hdmi as the first encoder to convert because it's rather simple: - no cloning possible - no differences between prepare/commit and dpms off/on switching. A few changes are required to do so: - Split up the dpms code into an enable/disable function and wire it up with the intel encoder. - Noop out the existing encoder prepare/commit functions used by the crtc helper - our crtc enable/disable code now calls back into the encoder enable/disable code at the right spot. - Create new helper functions to handle dpms changes. - Add intel_encoder->connectors_active to better track dpms state. Atm this is unused, but it will be useful to correctly disable the entire display pipe for cloned configurations. Also note that for now this is only useful in the dpms code - thanks to the crtc helper's dpms confusion across a modeset operation we can't (yet) rely on this having a sensible value in all circumstances. - Rip out the encoder helper dpms callback, if this is still getting called somewhere we have a bug. The slight issue with that is that the crtc helper abuses dpms off to disable unused functions. Hence we also need to implement a default encoder disable function to do just that with the new encoder->disable callback. - Note that we drop the cpt modeset verification in the commit callback, too. The right place to do this would be in the crtc's enable function, _after_ all the encoders are set up. But because not all encoders are converted yet, we can't do that. Hence disable this check temporarily as a minor concession to bisectability. v2: Squash the dpms mode to only the supported values - connector->dpms is for internal tracking only, we can hence avoid needless state-changes a bit whithout causing harm. v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-30 13:59:56 +07:00
/* Transcoder selection bits only update
* effectively on vblank. */
if (crtc)
intel_wait_for_vblank(dev, pipe);
else
msleep(50);
}
}
drm/i915/hdmi: convert to encoder->disable/enable I've picked hdmi as the first encoder to convert because it's rather simple: - no cloning possible - no differences between prepare/commit and dpms off/on switching. A few changes are required to do so: - Split up the dpms code into an enable/disable function and wire it up with the intel encoder. - Noop out the existing encoder prepare/commit functions used by the crtc helper - our crtc enable/disable code now calls back into the encoder enable/disable code at the right spot. - Create new helper functions to handle dpms changes. - Add intel_encoder->connectors_active to better track dpms state. Atm this is unused, but it will be useful to correctly disable the entire display pipe for cloned configurations. Also note that for now this is only useful in the dpms code - thanks to the crtc helper's dpms confusion across a modeset operation we can't (yet) rely on this having a sensible value in all circumstances. - Rip out the encoder helper dpms callback, if this is still getting called somewhere we have a bug. The slight issue with that is that the crtc helper abuses dpms off to disable unused functions. Hence we also need to implement a default encoder disable function to do just that with the new encoder->disable callback. - Note that we drop the cpt modeset verification in the commit callback, too. The right place to do this would be in the crtc's enable function, _after_ all the encoders are set up. But because not all encoders are converted yet, we can't do that. Hence disable this check temporarily as a minor concession to bisectability. v2: Squash the dpms mode to only the supported values - connector->dpms is for internal tracking only, we can hence avoid needless state-changes a bit whithout causing harm. v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-30 13:59:56 +07:00
/* HW workaround, need to toggle enable bit off and on for 12bpc, but
* we do this anyway which shows more stable in testing.
*/
if (HAS_PCH_SPLIT(dev)) {
I915_WRITE(intel_hdmi->hdmi_reg, temp & ~SDVO_ENABLE);
POSTING_READ(intel_hdmi->hdmi_reg);
drm/i915/hdmi: convert to encoder->disable/enable I've picked hdmi as the first encoder to convert because it's rather simple: - no cloning possible - no differences between prepare/commit and dpms off/on switching. A few changes are required to do so: - Split up the dpms code into an enable/disable function and wire it up with the intel encoder. - Noop out the existing encoder prepare/commit functions used by the crtc helper - our crtc enable/disable code now calls back into the encoder enable/disable code at the right spot. - Create new helper functions to handle dpms changes. - Add intel_encoder->connectors_active to better track dpms state. Atm this is unused, but it will be useful to correctly disable the entire display pipe for cloned configurations. Also note that for now this is only useful in the dpms code - thanks to the crtc helper's dpms confusion across a modeset operation we can't (yet) rely on this having a sensible value in all circumstances. - Rip out the encoder helper dpms callback, if this is still getting called somewhere we have a bug. The slight issue with that is that the crtc helper abuses dpms off to disable unused functions. Hence we also need to implement a default encoder disable function to do just that with the new encoder->disable callback. - Note that we drop the cpt modeset verification in the commit callback, too. The right place to do this would be in the crtc's enable function, _after_ all the encoders are set up. But because not all encoders are converted yet, we can't do that. Hence disable this check temporarily as a minor concession to bisectability. v2: Squash the dpms mode to only the supported values - connector->dpms is for internal tracking only, we can hence avoid needless state-changes a bit whithout causing harm. v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-30 13:59:56 +07:00
}
temp &= ~enable_bits;
I915_WRITE(intel_hdmi->hdmi_reg, temp);
POSTING_READ(intel_hdmi->hdmi_reg);
/* HW workaround, need to write this twice for issue that may result
* in first write getting masked.
*/
if (HAS_PCH_SPLIT(dev)) {
I915_WRITE(intel_hdmi->hdmi_reg, temp);
POSTING_READ(intel_hdmi->hdmi_reg);
}
}
static int hdmi_portclock_limit(struct intel_hdmi *hdmi)
{
struct drm_device *dev = intel_hdmi_to_dev(hdmi);
if (IS_G4X(dev))
return 165000;
else if (IS_HASWELL(dev) || INTEL_INFO(dev)->gen >= 8)
return 300000;
else
return 225000;
}
static enum drm_mode_status
intel_hdmi_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
if (mode->clock > hdmi_portclock_limit(intel_attached_hdmi(connector)))
return MODE_CLOCK_HIGH;
if (mode->clock < 20000)
return MODE_CLOCK_LOW;
if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
return MODE_NO_DBLESCAN;
return MODE_OK;
}
bool intel_hdmi_compute_config(struct intel_encoder *encoder,
struct intel_crtc_config *pipe_config)
{
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
struct drm_device *dev = encoder->base.dev;
struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
int clock_12bpc = pipe_config->adjusted_mode.crtc_clock * 3 / 2;
int portclock_limit = hdmi_portclock_limit(intel_hdmi);
drm/i915: implement fdi auto-dithering So on a bunch of setups we only have 2 fdi lanes available, e.g. hsw VGA or 3 pipes on ivb. And seemingly a lot of modes don't quite fit into this, among them the default 1080p mode. The solution is to dither down the pipe a bit so that everything fits, which this patch implements. But ports compute their state under the assumption that the bpp they pick will be the one selected, e.g. the display port bw computations won't work otherwise. Now we could adjust our code to again up-dither to the computed DP link parameters, but that's pointless. So instead when the pipe needs to adjust parameters we need to retry the pipe_config computation at the encoder stage. Furthermore we need to inform encoders that they should not increase bandwidth requirements if possible. This is required for the hdmi code, which prefers the pipe to up-dither to either of the two possible hdmi bpc values. LVDS has a similar requirement, although that's probably only theoretical in nature: It's unlikely that we'll ever see an 8bpc high-res lvds panel (which is required to hit the 2 fdi lane limit). eDP is the only thing which could increase the pipe_bpp setting again, even when in the retry-loop. This could hit the WARN. Two reasons for not bothering: - On many eDP panels we'll get a black screen if the bpp settings don't match vbt. So failing the modeset is the right thing to do. But since that also means it's the only way to light up the panel, it should work. So we shouldn't be able to hit this WARN. - There are still opens around the eDP panel handling, and maybe we need additional tricks. Before that happens it's imo no use trying to be too clever. Worst case we just need to kill that WARN or maybe fail the compute config stage if the eDP connector can't get the bpp setting it wants. And since this can only happen with an fdi link in between and so for pch eDP panels it's rather unlikely to blow up, if ever. v2: Rebased on top of a bikeshed from Paulo. v3: Improve commit message around eDP handling with the stuff things with Imre. Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-21 06:00:16 +07:00
int desired_bpp;
if (intel_hdmi->color_range_auto) {
/* See CEA-861-E - 5.1 Default Encoding Parameters */
if (intel_hdmi->has_hdmi_sink &&
drm_match_cea_mode(adjusted_mode) > 1)
intel_hdmi->color_range = HDMI_COLOR_RANGE_16_235;
else
intel_hdmi->color_range = 0;
}
if (intel_hdmi->color_range)
pipe_config->limited_color_range = true;
if (HAS_PCH_SPLIT(dev) && !HAS_DDI(dev))
pipe_config->has_pch_encoder = true;
drm/i915: precompute pipe bpp before touching the hw The procedure has now 3 steps: 1. Compute the bpp that the plane will output, this is done in pipe_config_set_bpp and stored into pipe_config->pipe_bpp. Also, this function clamps the pipe_bpp to whatever limit the EDID of any connected output specifies. 2. Adjust the pipe_bpp in the encoder and crtc functions, according to whatever constraints there are. 3. Decide whether to use dither by comparing the stored plane bpp with computed pipe_bpp. There are a few slight functional changes in this patch: - LVDS connector are now also going through the EDID clamping. But in a 2nd change we now unconditionally force the lvds bpc value - this shouldn't matter in reality when the panel setup is consistent, but better safe than sorry. - HDMI now forces the pipe_bpp to the selected value - I think that's what we actually want, since otherwise at least the pixelclock computations are wrong (I'm not sure whether the port would accept e.g. 10 bpc when in 12bpc mode). Contrary to the old code, we pick the next higher bpc value, since otherwise there's no way to make use of the 12 bpc mode (since the next patch will remove the 12bpc plane format, it doesn't exist). Both of these changes are due to the removal of the pipe_bpp = min(display_bpp, plane_bpp); statement. Another slight change is the reworking of the dp bpc code: - For the mode_valid callback it's sufficient to only check whether the mode would fit at the lowest bpc. - The bandwidth computation code is a bit restructured: It now walks all available bpp values in an outer loop and the codeblock that computes derived values (once a good configuration is found) has been moved out of the for loop maze. This is prep work to allow us to successively fall back on bpc values, and also correctly support bpc values != 8 or 6. v2: Rebased on top of Paulo Zanoni's little refactoring to use more drm dp helper functions. v3: Rebased on top of Jani's eDP bpp fix and Ville's limited color range work. v4: Remove the INTEL_MODE_DP_FORCE_6BPC #define, no longer needed. v5: Remove intel_crtc->bpp, too, and fix up the 12bpc check in the hdmi code. Also fixup the bpp check in intel_dp.c, it'll get reworked in a later patch though again. v6: Fix spelling in a comment. v7: Debug output improvements for the bpp computation. v8: Fixup 6bpc lvds check - dual-link and 8bpc mode are different things! v9: Reinstate the fix to properly ignore the firmware edp bpp ... this was lost in a rebase. v10: Both g4x and vlv lack 12bpc pipes, so don't enforce that we have that. Still unsure whether this is the way to go, but at least 6bpc for a 8bpc hdmi output seems to work. v11: And g4x/vlv also lack 12bpc hdmi support, so only support high depth on DP. Adjust the code. v12: Rebased. v13: Split out the introduction of pipe_config->dither|pipe_bpp, as requested from Jesse Barnes. v14: Split out the special 6BPC handling for DP, as requested by Jesse Barnes. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-27 06:44:58 +07:00
/*
* HDMI is either 12 or 8, so if the display lets 10bpc sneak
* through, clamp it down. Note that g4x/vlv don't support 12bpc hdmi
* outputs. We also need to check that the higher clock still fits
* within limits.
drm/i915: precompute pipe bpp before touching the hw The procedure has now 3 steps: 1. Compute the bpp that the plane will output, this is done in pipe_config_set_bpp and stored into pipe_config->pipe_bpp. Also, this function clamps the pipe_bpp to whatever limit the EDID of any connected output specifies. 2. Adjust the pipe_bpp in the encoder and crtc functions, according to whatever constraints there are. 3. Decide whether to use dither by comparing the stored plane bpp with computed pipe_bpp. There are a few slight functional changes in this patch: - LVDS connector are now also going through the EDID clamping. But in a 2nd change we now unconditionally force the lvds bpc value - this shouldn't matter in reality when the panel setup is consistent, but better safe than sorry. - HDMI now forces the pipe_bpp to the selected value - I think that's what we actually want, since otherwise at least the pixelclock computations are wrong (I'm not sure whether the port would accept e.g. 10 bpc when in 12bpc mode). Contrary to the old code, we pick the next higher bpc value, since otherwise there's no way to make use of the 12 bpc mode (since the next patch will remove the 12bpc plane format, it doesn't exist). Both of these changes are due to the removal of the pipe_bpp = min(display_bpp, plane_bpp); statement. Another slight change is the reworking of the dp bpc code: - For the mode_valid callback it's sufficient to only check whether the mode would fit at the lowest bpc. - The bandwidth computation code is a bit restructured: It now walks all available bpp values in an outer loop and the codeblock that computes derived values (once a good configuration is found) has been moved out of the for loop maze. This is prep work to allow us to successively fall back on bpc values, and also correctly support bpc values != 8 or 6. v2: Rebased on top of Paulo Zanoni's little refactoring to use more drm dp helper functions. v3: Rebased on top of Jani's eDP bpp fix and Ville's limited color range work. v4: Remove the INTEL_MODE_DP_FORCE_6BPC #define, no longer needed. v5: Remove intel_crtc->bpp, too, and fix up the 12bpc check in the hdmi code. Also fixup the bpp check in intel_dp.c, it'll get reworked in a later patch though again. v6: Fix spelling in a comment. v7: Debug output improvements for the bpp computation. v8: Fixup 6bpc lvds check - dual-link and 8bpc mode are different things! v9: Reinstate the fix to properly ignore the firmware edp bpp ... this was lost in a rebase. v10: Both g4x and vlv lack 12bpc pipes, so don't enforce that we have that. Still unsure whether this is the way to go, but at least 6bpc for a 8bpc hdmi output seems to work. v11: And g4x/vlv also lack 12bpc hdmi support, so only support high depth on DP. Adjust the code. v12: Rebased. v13: Split out the introduction of pipe_config->dither|pipe_bpp, as requested from Jesse Barnes. v14: Split out the special 6BPC handling for DP, as requested by Jesse Barnes. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-27 06:44:58 +07:00
*/
if (pipe_config->pipe_bpp > 8*3 && clock_12bpc <= portclock_limit
&& HAS_PCH_SPLIT(dev)) {
drm/i915: implement fdi auto-dithering So on a bunch of setups we only have 2 fdi lanes available, e.g. hsw VGA or 3 pipes on ivb. And seemingly a lot of modes don't quite fit into this, among them the default 1080p mode. The solution is to dither down the pipe a bit so that everything fits, which this patch implements. But ports compute their state under the assumption that the bpp they pick will be the one selected, e.g. the display port bw computations won't work otherwise. Now we could adjust our code to again up-dither to the computed DP link parameters, but that's pointless. So instead when the pipe needs to adjust parameters we need to retry the pipe_config computation at the encoder stage. Furthermore we need to inform encoders that they should not increase bandwidth requirements if possible. This is required for the hdmi code, which prefers the pipe to up-dither to either of the two possible hdmi bpc values. LVDS has a similar requirement, although that's probably only theoretical in nature: It's unlikely that we'll ever see an 8bpc high-res lvds panel (which is required to hit the 2 fdi lane limit). eDP is the only thing which could increase the pipe_bpp setting again, even when in the retry-loop. This could hit the WARN. Two reasons for not bothering: - On many eDP panels we'll get a black screen if the bpp settings don't match vbt. So failing the modeset is the right thing to do. But since that also means it's the only way to light up the panel, it should work. So we shouldn't be able to hit this WARN. - There are still opens around the eDP panel handling, and maybe we need additional tricks. Before that happens it's imo no use trying to be too clever. Worst case we just need to kill that WARN or maybe fail the compute config stage if the eDP connector can't get the bpp setting it wants. And since this can only happen with an fdi link in between and so for pch eDP panels it's rather unlikely to blow up, if ever. v2: Rebased on top of a bikeshed from Paulo. v3: Improve commit message around eDP handling with the stuff things with Imre. Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-21 06:00:16 +07:00
DRM_DEBUG_KMS("picking bpc to 12 for HDMI output\n");
desired_bpp = 12*3;
/* Need to adjust the port link by 1.5x for 12bpc. */
drm/i915: store adjusted dotclock in adjusted_mode->clock ... not the port clock. This allows us to kill the funny semantics around pixel_target_clock. Since the dpll code still needs the real port clock, add a new port_clock field to the pipe configuration. Handling the default case for that one is a bit tricky, since encoders might not consistently overwrite it when retrying the crtc/encoder bw arbitrage step in the compute config stage. Hence we need to always clear port_clock and update it again if the encoder hasn't put in something more specific. This can't be done in one step since the encoder might want to adjust the mode first. I was a bit on the fence whether I should subsume the pixel multiplier handling into the port_clock, too. But then I decided against this since it's on an abstract level still the dotclock of the adjusted mode, and only our hw makes it a bit special due to the separate pixel mulitplier setting (which requires that the dpll runs at the non-multiplied dotclock). So after this patch the adjusted_mode accurately describes the mode we feed into the port, after the panel fitter and pixel multiplier (or line doubling, if we ever bother with that) have done their job. Since the fdi link is between the pfit and the pixel multiplier steps we need to be careful with calculating the fdi link config. v2: Fix up ilk cpu pll handling. v3: Introduce an fdi_dotclock variable in ironlake_fdi_compute_config to make it clearer that we transmit the adjusted_mode without the pixel multiplier taken into account. The old code multiplied the the available link bw with the pixel multiplier, which results in the same fdi configuration, but is much more confusing. v4: Rebase on top of Imre's is_cpu_edp removal. v5: Rebase on top of Paulo's haswell watermark fixes, which introduce a new place which looked at the pixel_clock and so needed conversion. v6: Split out prep patches as requested by Paulo Zanoni. Also rebase on top of the fdi dotclock handling fix in the fdi lanes/bw computation code. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> (v6) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-06-01 22:16:21 +07:00
pipe_config->port_clock = clock_12bpc;
drm/i915: precompute pipe bpp before touching the hw The procedure has now 3 steps: 1. Compute the bpp that the plane will output, this is done in pipe_config_set_bpp and stored into pipe_config->pipe_bpp. Also, this function clamps the pipe_bpp to whatever limit the EDID of any connected output specifies. 2. Adjust the pipe_bpp in the encoder and crtc functions, according to whatever constraints there are. 3. Decide whether to use dither by comparing the stored plane bpp with computed pipe_bpp. There are a few slight functional changes in this patch: - LVDS connector are now also going through the EDID clamping. But in a 2nd change we now unconditionally force the lvds bpc value - this shouldn't matter in reality when the panel setup is consistent, but better safe than sorry. - HDMI now forces the pipe_bpp to the selected value - I think that's what we actually want, since otherwise at least the pixelclock computations are wrong (I'm not sure whether the port would accept e.g. 10 bpc when in 12bpc mode). Contrary to the old code, we pick the next higher bpc value, since otherwise there's no way to make use of the 12 bpc mode (since the next patch will remove the 12bpc plane format, it doesn't exist). Both of these changes are due to the removal of the pipe_bpp = min(display_bpp, plane_bpp); statement. Another slight change is the reworking of the dp bpc code: - For the mode_valid callback it's sufficient to only check whether the mode would fit at the lowest bpc. - The bandwidth computation code is a bit restructured: It now walks all available bpp values in an outer loop and the codeblock that computes derived values (once a good configuration is found) has been moved out of the for loop maze. This is prep work to allow us to successively fall back on bpc values, and also correctly support bpc values != 8 or 6. v2: Rebased on top of Paulo Zanoni's little refactoring to use more drm dp helper functions. v3: Rebased on top of Jani's eDP bpp fix and Ville's limited color range work. v4: Remove the INTEL_MODE_DP_FORCE_6BPC #define, no longer needed. v5: Remove intel_crtc->bpp, too, and fix up the 12bpc check in the hdmi code. Also fixup the bpp check in intel_dp.c, it'll get reworked in a later patch though again. v6: Fix spelling in a comment. v7: Debug output improvements for the bpp computation. v8: Fixup 6bpc lvds check - dual-link and 8bpc mode are different things! v9: Reinstate the fix to properly ignore the firmware edp bpp ... this was lost in a rebase. v10: Both g4x and vlv lack 12bpc pipes, so don't enforce that we have that. Still unsure whether this is the way to go, but at least 6bpc for a 8bpc hdmi output seems to work. v11: And g4x/vlv also lack 12bpc hdmi support, so only support high depth on DP. Adjust the code. v12: Rebased. v13: Split out the introduction of pipe_config->dither|pipe_bpp, as requested from Jesse Barnes. v14: Split out the special 6BPC handling for DP, as requested by Jesse Barnes. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-27 06:44:58 +07:00
} else {
drm/i915: implement fdi auto-dithering So on a bunch of setups we only have 2 fdi lanes available, e.g. hsw VGA or 3 pipes on ivb. And seemingly a lot of modes don't quite fit into this, among them the default 1080p mode. The solution is to dither down the pipe a bit so that everything fits, which this patch implements. But ports compute their state under the assumption that the bpp they pick will be the one selected, e.g. the display port bw computations won't work otherwise. Now we could adjust our code to again up-dither to the computed DP link parameters, but that's pointless. So instead when the pipe needs to adjust parameters we need to retry the pipe_config computation at the encoder stage. Furthermore we need to inform encoders that they should not increase bandwidth requirements if possible. This is required for the hdmi code, which prefers the pipe to up-dither to either of the two possible hdmi bpc values. LVDS has a similar requirement, although that's probably only theoretical in nature: It's unlikely that we'll ever see an 8bpc high-res lvds panel (which is required to hit the 2 fdi lane limit). eDP is the only thing which could increase the pipe_bpp setting again, even when in the retry-loop. This could hit the WARN. Two reasons for not bothering: - On many eDP panels we'll get a black screen if the bpp settings don't match vbt. So failing the modeset is the right thing to do. But since that also means it's the only way to light up the panel, it should work. So we shouldn't be able to hit this WARN. - There are still opens around the eDP panel handling, and maybe we need additional tricks. Before that happens it's imo no use trying to be too clever. Worst case we just need to kill that WARN or maybe fail the compute config stage if the eDP connector can't get the bpp setting it wants. And since this can only happen with an fdi link in between and so for pch eDP panels it's rather unlikely to blow up, if ever. v2: Rebased on top of a bikeshed from Paulo. v3: Improve commit message around eDP handling with the stuff things with Imre. Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-21 06:00:16 +07:00
DRM_DEBUG_KMS("picking bpc to 8 for HDMI output\n");
desired_bpp = 8*3;
}
if (!pipe_config->bw_constrained) {
DRM_DEBUG_KMS("forcing pipe bpc to %i for HDMI\n", desired_bpp);
pipe_config->pipe_bpp = desired_bpp;
drm/i915: precompute pipe bpp before touching the hw The procedure has now 3 steps: 1. Compute the bpp that the plane will output, this is done in pipe_config_set_bpp and stored into pipe_config->pipe_bpp. Also, this function clamps the pipe_bpp to whatever limit the EDID of any connected output specifies. 2. Adjust the pipe_bpp in the encoder and crtc functions, according to whatever constraints there are. 3. Decide whether to use dither by comparing the stored plane bpp with computed pipe_bpp. There are a few slight functional changes in this patch: - LVDS connector are now also going through the EDID clamping. But in a 2nd change we now unconditionally force the lvds bpc value - this shouldn't matter in reality when the panel setup is consistent, but better safe than sorry. - HDMI now forces the pipe_bpp to the selected value - I think that's what we actually want, since otherwise at least the pixelclock computations are wrong (I'm not sure whether the port would accept e.g. 10 bpc when in 12bpc mode). Contrary to the old code, we pick the next higher bpc value, since otherwise there's no way to make use of the 12 bpc mode (since the next patch will remove the 12bpc plane format, it doesn't exist). Both of these changes are due to the removal of the pipe_bpp = min(display_bpp, plane_bpp); statement. Another slight change is the reworking of the dp bpc code: - For the mode_valid callback it's sufficient to only check whether the mode would fit at the lowest bpc. - The bandwidth computation code is a bit restructured: It now walks all available bpp values in an outer loop and the codeblock that computes derived values (once a good configuration is found) has been moved out of the for loop maze. This is prep work to allow us to successively fall back on bpc values, and also correctly support bpc values != 8 or 6. v2: Rebased on top of Paulo Zanoni's little refactoring to use more drm dp helper functions. v3: Rebased on top of Jani's eDP bpp fix and Ville's limited color range work. v4: Remove the INTEL_MODE_DP_FORCE_6BPC #define, no longer needed. v5: Remove intel_crtc->bpp, too, and fix up the 12bpc check in the hdmi code. Also fixup the bpp check in intel_dp.c, it'll get reworked in a later patch though again. v6: Fix spelling in a comment. v7: Debug output improvements for the bpp computation. v8: Fixup 6bpc lvds check - dual-link and 8bpc mode are different things! v9: Reinstate the fix to properly ignore the firmware edp bpp ... this was lost in a rebase. v10: Both g4x and vlv lack 12bpc pipes, so don't enforce that we have that. Still unsure whether this is the way to go, but at least 6bpc for a 8bpc hdmi output seems to work. v11: And g4x/vlv also lack 12bpc hdmi support, so only support high depth on DP. Adjust the code. v12: Rebased. v13: Split out the introduction of pipe_config->dither|pipe_bpp, as requested from Jesse Barnes. v14: Split out the special 6BPC handling for DP, as requested by Jesse Barnes. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-27 06:44:58 +07:00
}
if (adjusted_mode->crtc_clock > portclock_limit) {
DRM_DEBUG_KMS("too high HDMI clock, rejecting mode\n");
return false;
}
return true;
}
static enum drm_connector_status
intel_hdmi_detect(struct drm_connector *connector, bool force)
{
struct drm_device *dev = connector->dev;
struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector);
struct intel_digital_port *intel_dig_port =
hdmi_to_dig_port(intel_hdmi);
struct intel_encoder *intel_encoder = &intel_dig_port->base;
struct drm_i915_private *dev_priv = dev->dev_private;
struct edid *edid;
enum drm_connector_status status = connector_status_disconnected;
DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
connector->base.id, drm_get_connector_name(connector));
intel_hdmi->has_hdmi_sink = false;
intel_hdmi->has_audio = false;
intel_hdmi->rgb_quant_range_selectable = false;
edid = drm_get_edid(connector,
intel_gmbus_get_adapter(dev_priv,
intel_hdmi->ddc_bus));
if (edid) {
if (edid->input & DRM_EDID_INPUT_DIGITAL) {
status = connector_status_connected;
if (intel_hdmi->force_audio != HDMI_AUDIO_OFF_DVI)
intel_hdmi->has_hdmi_sink =
drm_detect_hdmi_monitor(edid);
intel_hdmi->has_audio = drm_detect_monitor_audio(edid);
intel_hdmi->rgb_quant_range_selectable =
drm_rgb_quant_range_selectable(edid);
}
kfree(edid);
}
if (status == connector_status_connected) {
if (intel_hdmi->force_audio != HDMI_AUDIO_AUTO)
intel_hdmi->has_audio =
(intel_hdmi->force_audio == HDMI_AUDIO_ON);
intel_encoder->type = INTEL_OUTPUT_HDMI;
}
return status;
}
static int intel_hdmi_get_modes(struct drm_connector *connector)
{
struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector);
struct drm_i915_private *dev_priv = connector->dev->dev_private;
/* We should parse the EDID data and find out if it's an HDMI sink so
* we can send audio to it.
*/
return intel_ddc_get_modes(connector,
intel_gmbus_get_adapter(dev_priv,
intel_hdmi->ddc_bus));
}
static bool
intel_hdmi_detect_audio(struct drm_connector *connector)
{
struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector);
struct drm_i915_private *dev_priv = connector->dev->dev_private;
struct edid *edid;
bool has_audio = false;
edid = drm_get_edid(connector,
intel_gmbus_get_adapter(dev_priv,
intel_hdmi->ddc_bus));
if (edid) {
if (edid->input & DRM_EDID_INPUT_DIGITAL)
has_audio = drm_detect_monitor_audio(edid);
kfree(edid);
}
return has_audio;
}
static int
intel_hdmi_set_property(struct drm_connector *connector,
struct drm_property *property,
uint64_t val)
{
struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector);
struct intel_digital_port *intel_dig_port =
hdmi_to_dig_port(intel_hdmi);
struct drm_i915_private *dev_priv = connector->dev->dev_private;
int ret;
ret = drm_object_property_set_value(&connector->base, property, val);
if (ret)
return ret;
if (property == dev_priv->force_audio_property) {
enum hdmi_force_audio i = val;
bool has_audio;
if (i == intel_hdmi->force_audio)
return 0;
intel_hdmi->force_audio = i;
if (i == HDMI_AUDIO_AUTO)
has_audio = intel_hdmi_detect_audio(connector);
else
has_audio = (i == HDMI_AUDIO_ON);
if (i == HDMI_AUDIO_OFF_DVI)
intel_hdmi->has_hdmi_sink = 0;
intel_hdmi->has_audio = has_audio;
goto done;
}
if (property == dev_priv->broadcast_rgb_property) {
bool old_auto = intel_hdmi->color_range_auto;
uint32_t old_range = intel_hdmi->color_range;
switch (val) {
case INTEL_BROADCAST_RGB_AUTO:
intel_hdmi->color_range_auto = true;
break;
case INTEL_BROADCAST_RGB_FULL:
intel_hdmi->color_range_auto = false;
intel_hdmi->color_range = 0;
break;
case INTEL_BROADCAST_RGB_LIMITED:
intel_hdmi->color_range_auto = false;
intel_hdmi->color_range = HDMI_COLOR_RANGE_16_235;
break;
default:
return -EINVAL;
}
if (old_auto == intel_hdmi->color_range_auto &&
old_range == intel_hdmi->color_range)
return 0;
goto done;
}
return -EINVAL;
done:
if (intel_dig_port->base.base.crtc)
intel_crtc_restore_mode(intel_dig_port->base.base.crtc);
return 0;
}
static void vlv_hdmi_pre_enable(struct intel_encoder *encoder)
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 04:51:36 +07:00
{
struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc =
to_intel_crtc(encoder->base.crtc);
enum dpio_channel port = vlv_dport_to_channel(dport);
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 04:51:36 +07:00
int pipe = intel_crtc->pipe;
u32 val;
if (!IS_VALLEYVIEW(dev))
return;
/* Enable clock channels for this port */
mutex_lock(&dev_priv->dpio_lock);
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW8(port));
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 04:51:36 +07:00
val = 0;
if (pipe)
val |= (1<<21);
else
val &= ~(1<<21);
val |= 0x001000c4;
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW8(port), val);
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 04:51:36 +07:00
/* HDMI 1.0V-2dB */
vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), 0);
vlv_dpio_write(dev_priv, pipe, VLV_TX_DW4(port), 0x2b245f5f);
vlv_dpio_write(dev_priv, pipe, VLV_TX_DW2(port), 0x5578b83a);
vlv_dpio_write(dev_priv, pipe, VLV_TX_DW3(port), 0x0c782040);
vlv_dpio_write(dev_priv, pipe, VLV_TX3_DW4(port), 0x2b247878);
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW11(port), 0x00030000);
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW9(port), 0x00002000);
vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), DPIO_TX_OCALINIT_EN);
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 04:51:36 +07:00
/* Program lane clock */
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW14(port), 0x00760018);
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW23(port), 0x00400888);
mutex_unlock(&dev_priv->dpio_lock);
intel_enable_hdmi(encoder);
vlv_wait_port_ready(dev_priv, dport);
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 04:51:36 +07:00
}
static void vlv_hdmi_pre_pll_enable(struct intel_encoder *encoder)
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 04:51:36 +07:00
{
struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc =
to_intel_crtc(encoder->base.crtc);
enum dpio_channel port = vlv_dport_to_channel(dport);
int pipe = intel_crtc->pipe;
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 04:51:36 +07:00
if (!IS_VALLEYVIEW(dev))
return;
/* Program Tx lane resets to default */
mutex_lock(&dev_priv->dpio_lock);
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW0(port),
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 04:51:36 +07:00
DPIO_PCS_TX_LANE2_RESET |
DPIO_PCS_TX_LANE1_RESET);
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW1(port),
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 04:51:36 +07:00
DPIO_PCS_CLK_CRI_RXEB_EIOS_EN |
DPIO_PCS_CLK_CRI_RXDIGFILTSG_EN |
(1<<DPIO_PCS_CLK_DATAWIDTH_SHIFT) |
DPIO_PCS_CLK_SOFT_RESET);
/* Fix up inter-pair skew failure */
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW12(port), 0x00750f00);
vlv_dpio_write(dev_priv, pipe, VLV_TX_DW11(port), 0x00001500);
vlv_dpio_write(dev_priv, pipe, VLV_TX_DW14(port), 0x40400000);
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW9(port), 0x00002000);
vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), DPIO_TX_OCALINIT_EN);
mutex_unlock(&dev_priv->dpio_lock);
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 04:51:36 +07:00
}
static void vlv_hdmi_post_disable(struct intel_encoder *encoder)
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 04:51:36 +07:00
{
struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
struct intel_crtc *intel_crtc =
to_intel_crtc(encoder->base.crtc);
enum dpio_channel port = vlv_dport_to_channel(dport);
int pipe = intel_crtc->pipe;
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 04:51:36 +07:00
/* Reset lanes to avoid HDMI flicker (VLV w/a) */
mutex_lock(&dev_priv->dpio_lock);
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW0(port), 0x00000000);
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW1(port), 0x00e00060);
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 04:51:36 +07:00
mutex_unlock(&dev_priv->dpio_lock);
}
static void intel_hdmi_destroy(struct drm_connector *connector)
{
drm_connector_cleanup(connector);
kfree(connector);
}
static const struct drm_connector_funcs intel_hdmi_connector_funcs = {
drm/i915/hdmi: convert to encoder->disable/enable I've picked hdmi as the first encoder to convert because it's rather simple: - no cloning possible - no differences between prepare/commit and dpms off/on switching. A few changes are required to do so: - Split up the dpms code into an enable/disable function and wire it up with the intel encoder. - Noop out the existing encoder prepare/commit functions used by the crtc helper - our crtc enable/disable code now calls back into the encoder enable/disable code at the right spot. - Create new helper functions to handle dpms changes. - Add intel_encoder->connectors_active to better track dpms state. Atm this is unused, but it will be useful to correctly disable the entire display pipe for cloned configurations. Also note that for now this is only useful in the dpms code - thanks to the crtc helper's dpms confusion across a modeset operation we can't (yet) rely on this having a sensible value in all circumstances. - Rip out the encoder helper dpms callback, if this is still getting called somewhere we have a bug. The slight issue with that is that the crtc helper abuses dpms off to disable unused functions. Hence we also need to implement a default encoder disable function to do just that with the new encoder->disable callback. - Note that we drop the cpt modeset verification in the commit callback, too. The right place to do this would be in the crtc's enable function, _after_ all the encoders are set up. But because not all encoders are converted yet, we can't do that. Hence disable this check temporarily as a minor concession to bisectability. v2: Squash the dpms mode to only the supported values - connector->dpms is for internal tracking only, we can hence avoid needless state-changes a bit whithout causing harm. v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-30 13:59:56 +07:00
.dpms = intel_connector_dpms,
.detect = intel_hdmi_detect,
.fill_modes = drm_helper_probe_single_connector_modes,
.set_property = intel_hdmi_set_property,
.destroy = intel_hdmi_destroy,
};
static const struct drm_connector_helper_funcs intel_hdmi_connector_helper_funcs = {
.get_modes = intel_hdmi_get_modes,
.mode_valid = intel_hdmi_mode_valid,
.best_encoder = intel_best_encoder,
};
static const struct drm_encoder_funcs intel_hdmi_enc_funcs = {
.destroy = intel_encoder_destroy,
};
static void
intel_hdmi_add_properties(struct intel_hdmi *intel_hdmi, struct drm_connector *connector)
{
intel_attach_force_audio_property(connector);
intel_attach_broadcast_rgb_property(connector);
intel_hdmi->color_range_auto = true;
}
void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
struct intel_connector *intel_connector)
{
struct drm_connector *connector = &intel_connector->base;
struct intel_hdmi *intel_hdmi = &intel_dig_port->hdmi;
struct intel_encoder *intel_encoder = &intel_dig_port->base;
struct drm_device *dev = intel_encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
enum port port = intel_dig_port->port;
drm_connector_init(dev, connector, &intel_hdmi_connector_funcs,
DRM_MODE_CONNECTOR_HDMIA);
drm_connector_helper_add(connector, &intel_hdmi_connector_helper_funcs);
connector->interlace_allowed = 1;
connector->doublescan_allowed = 0;
connector->stereo_allowed = 1;
drm/i915: simplify possible_clones computation Intel hw only has one MUX for encoders, so outputs are either not cloneable or all in the same group of cloneable outputs. This neatly simplifies the code and allows us to ditch some ugly if cascades in the dp and hdmi init code (well, we need these if cascades for other stuff still, but that can be taken care of in follow-up patches). Note that this changes two things: - dvo can now be cloned with sdvo, but dvo is gen2 whereas sdvo is gen3+, so no problem. Note that the old code had a bug and didn't allow cloning crt with dvo (but only the other way round). - sdvo-lvds can now be cloned with sdvo-non-tv. Spec says this won't work, but the only reason I've found is that you can't use the panel-fitter (used for lvds upscaling) with anything else. But we don't use the panel fitter for sdvo-lvds. Imo this part of Bspec is a) rather confusing b) mostly as a guideline to implementors (i.e. explicitly stating what is already implicit from the spec, without always going into the details of why). So I think we can ignore this - worst case we'll get a bug report from a user with with sdvo-lvds and sdvo-tmds and have to add that special case back in. Because sdvo lvds is a bit special explain in comments why sdvo LVDS outputs can be cloned, but native LVDS and eDP can't be cloned - we use the panel fitter for the later, but not for sdvo. Note that this also uncoditionally initializes the panel_vdd work used by eDP. Trying to be clever doesn't buy us anything (but strange bugs) and this way we can kill the is_edp check. v2: Incorporate review from Paulo - Add in a missing space. - Pimp comment message to address his concerns. Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-13 01:08:18 +07:00
switch (port) {
case PORT_B:
intel_hdmi->ddc_bus = GMBUS_PORT_DPB;
intel_encoder->hpd_pin = HPD_PORT_B;
break;
case PORT_C:
intel_hdmi->ddc_bus = GMBUS_PORT_DPC;
intel_encoder->hpd_pin = HPD_PORT_C;
break;
case PORT_D:
intel_hdmi->ddc_bus = GMBUS_PORT_DPD;
intel_encoder->hpd_pin = HPD_PORT_D;
break;
case PORT_A:
intel_encoder->hpd_pin = HPD_PORT_A;
/* Internal port only for eDP. */
default:
BUG();
}
if (IS_VALLEYVIEW(dev)) {
intel_hdmi->write_infoframe = vlv_write_infoframe;
intel_hdmi->set_infoframes = vlv_set_infoframes;
} else if (!HAS_PCH_SPLIT(dev)) {
intel_hdmi->write_infoframe = g4x_write_infoframe;
intel_hdmi->set_infoframes = g4x_set_infoframes;
} else if (HAS_DDI(dev)) {
intel_hdmi->write_infoframe = hsw_write_infoframe;
intel_hdmi->set_infoframes = hsw_set_infoframes;
} else if (HAS_PCH_IBX(dev)) {
intel_hdmi->write_infoframe = ibx_write_infoframe;
intel_hdmi->set_infoframes = ibx_set_infoframes;
} else {
intel_hdmi->write_infoframe = cpt_write_infoframe;
intel_hdmi->set_infoframes = cpt_set_infoframes;
}
if (HAS_DDI(dev))
intel_connector->get_hw_state = intel_ddi_connector_get_hw_state;
else
intel_connector->get_hw_state = intel_connector_get_hw_state;
intel_hdmi_add_properties(intel_hdmi, connector);
intel_connector_attach_encoder(intel_connector, intel_encoder);
drm_sysfs_connector_add(connector);
/* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written
* 0xd. Failure to do so will result in spurious interrupts being
* generated on the port when a cable is not attached.
*/
if (IS_G4X(dev) && !IS_GM45(dev)) {
u32 temp = I915_READ(PEG_BAND_GAP_DATA);
I915_WRITE(PEG_BAND_GAP_DATA, (temp & ~0xf) | 0xd);
}
}
void intel_hdmi_init(struct drm_device *dev, int hdmi_reg, enum port port)
{
struct intel_digital_port *intel_dig_port;
struct intel_encoder *intel_encoder;
struct intel_connector *intel_connector;
intel_dig_port = kzalloc(sizeof(*intel_dig_port), GFP_KERNEL);
if (!intel_dig_port)
return;
intel_connector = kzalloc(sizeof(*intel_connector), GFP_KERNEL);
if (!intel_connector) {
kfree(intel_dig_port);
return;
}
intel_encoder = &intel_dig_port->base;
drm_encoder_init(dev, &intel_encoder->base, &intel_hdmi_enc_funcs,
DRM_MODE_ENCODER_TMDS);
intel_encoder->compute_config = intel_hdmi_compute_config;
intel_encoder->mode_set = intel_hdmi_mode_set;
intel_encoder->disable = intel_disable_hdmi;
intel_encoder->get_hw_state = intel_hdmi_get_hw_state;
intel_encoder->get_config = intel_hdmi_get_config;
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 04:51:36 +07:00
if (IS_VALLEYVIEW(dev)) {
intel_encoder->pre_pll_enable = vlv_hdmi_pre_pll_enable;
intel_encoder->pre_enable = vlv_hdmi_pre_enable;
intel_encoder->enable = vlv_enable_hdmi;
intel_encoder->post_disable = vlv_hdmi_post_disable;
} else {
intel_encoder->enable = intel_enable_hdmi;
drm/i915: update VLV PLL and DPIO code v11 In Valleyview voltage swing, pre-emphasis and lane control registers can be programmed only through the h/w side band fabric. Update vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the appropriate programming. We need to make sure that the tx lane reset occurs in both the full mode set and DPMS paths, so factor things out to allow that. v2: use different DPIO_DIVISOR values for VGA and DisplayPort v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values for all display interfaces v4: collapse with various updates v5: squash with crtc enable/pll enable bits v6: split out DP code (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) remove unneeded check in 9xx pll div update (Jani) wrap VLV pll update call in IS_VALLEYVIEW (Jani) move port enable back to end of crtc enable (jbarnes) put phyready check under IS_VALLEYVIEW (jbarnes) v7: fix up conflicts against latest drm-intel-next-queued v8: use DPIO reg names, fix pipes (Jani) from mPhy_registers_VLV2_ww20p5 doc v9: update to latest info from driver enabling notes doc driver_vbios_notes_9 v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work simultaneously (Jesse) v11: use pll/port callbacks for DPIO port activity (Daniel) use separate VLV CRTC enable function (Daniel) move around port ready checks (Jesse) Signed-off-by: Pallavi G <pallavi.g@intel.com> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Drop pfit changes and add a little comment explaining that vlv has a different enable sequence and so needs it's own crtc_enable callback. Also apply a fixup patch from Wu Fengguang to shut up some compiler warnings.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-04-19 04:51:36 +07:00
}
drm/i915/hdmi: convert to encoder->disable/enable I've picked hdmi as the first encoder to convert because it's rather simple: - no cloning possible - no differences between prepare/commit and dpms off/on switching. A few changes are required to do so: - Split up the dpms code into an enable/disable function and wire it up with the intel encoder. - Noop out the existing encoder prepare/commit functions used by the crtc helper - our crtc enable/disable code now calls back into the encoder enable/disable code at the right spot. - Create new helper functions to handle dpms changes. - Add intel_encoder->connectors_active to better track dpms state. Atm this is unused, but it will be useful to correctly disable the entire display pipe for cloned configurations. Also note that for now this is only useful in the dpms code - thanks to the crtc helper's dpms confusion across a modeset operation we can't (yet) rely on this having a sensible value in all circumstances. - Rip out the encoder helper dpms callback, if this is still getting called somewhere we have a bug. The slight issue with that is that the crtc helper abuses dpms off to disable unused functions. Hence we also need to implement a default encoder disable function to do just that with the new encoder->disable callback. - Note that we drop the cpt modeset verification in the commit callback, too. The right place to do this would be in the crtc's enable function, _after_ all the encoders are set up. But because not all encoders are converted yet, we can't do that. Hence disable this check temporarily as a minor concession to bisectability. v2: Squash the dpms mode to only the supported values - connector->dpms is for internal tracking only, we can hence avoid needless state-changes a bit whithout causing harm. v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-30 13:59:56 +07:00
intel_encoder->type = INTEL_OUTPUT_HDMI;
intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
intel_encoder->cloneable = false;
intel_dig_port->port = port;
intel_dig_port->hdmi.hdmi_reg = hdmi_reg;
intel_dig_port->dp.output_reg = 0;
intel_hdmi_init_connector(intel_dig_port, intel_connector);
}