linux_dsm_epyc7002/drivers/video/fbdev/omap2/dss/dss_features.c

936 lines
28 KiB
C
Raw Normal View History

/*
* linux/drivers/video/omap2/dss/dss_features.c
*
* Copyright (C) 2010 Texas Instruments
* Author: Archit Taneja <archit@ti.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <video/omapdss.h>
#include "dss.h"
#include "dss_features.h"
/* Defines a generic omap register field */
struct dss_reg_field {
u8 start, end;
};
struct dss_param_range {
int min, max;
};
struct omap_dss_features {
const struct dss_reg_field *reg_fields;
const int num_reg_fields;
const enum dss_feat_id *features;
const int num_features;
const int num_mgrs;
const int num_ovls;
const int num_wbs;
const enum omap_display_type *supported_displays;
const enum omap_dss_output_id *supported_outputs;
const enum omap_color_mode *supported_color_modes;
const enum omap_overlay_caps *overlay_caps;
const char * const *clksrc_names;
const struct dss_param_range *dss_params;
OMAP: DSS2: Fix FIFO threshold and burst size for OMAP4 The DMA FIFO threshold registers and burst size registers have changed for OMAP4. The current code only handles OMAP2/3 case, and so the values are a bit off for OMAP4. A summary of the differences between OMAP2/3 and OMAP4: Burst size: OMAP2/3: 4 x 32 bits / 8 x 32 bits / 16 x 32 bits OMAP4: 2 x 128 bits / 4 x 128 bits / 8 x 128 bits Threshold size: OMAP2/3: in bytes (8 bit units) OMAP4: in 128bit units This patch fixes the issue by creating two new helper functions in dss_features: dss_feat_get_buffer_size_unit() and dss_feat_get_burst_size_unit(). These return (in bytes) the unit size for threshold registers and unit size for burst size register, respectively, and are used to calculate correct values. For the threshold size the usage is straightforward. However, the burst size register has different multipliers for OMAP2/3 and OMAP4. This patch solves the problem by defining the multipliers for the burst size as 2x, 4x and 8x, which fit fine for the OMAP4 burst size definition (i.e. burst size unit for OMAP4 is 128bits), but requires a slight twist on OMAP2/3 by defining the burst size unit as 64bit. As the driver in practice always uses the maximum burst size, and no use case currently exists where we would want to use a smaller burst size, this patch changes the driver to hardcode the burst size when initializing DISPC. This makes the threshold configuration code somewhat simpler. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-06-21 13:35:36 +07:00
OMAPDSS: DISPC: Support rotation through TILER TILER is a block in OMAP4's DMM which lets DSS fetch frames in a rotated manner. Physical memory can be mapped to a portion of OMAP's system address space called TILER address space. The TILER address space is split into 8 views. Each view represents a rotated or mirrored form of the mapped physical memory. When a DISPC overlay's base address is programmed to one of these views, the TILER fetches the pixels according to the orientation of the view. A view is further split into 4 containers, each container holds elements of a particular size. Rotation can be achieved at the granularity of elements in the container. For more information on TILER, refer to the Memory Subsytem section in OMAP4 TRM. Rotation type TILER has been added which is used to exploit the capabilities of these 8 views for performing various rotations. When fetching from addresses mapped to TILER space, the DISPC DMA can fetch pixels in either 1D or 2D bursts. The fetch depends on which TILER container we are accessing. Accessing 8, 16 and 32 bit sized containers requires 2D bursts, and page mode sized containers require 1D bursts. The DSS2 user is expected to provide the Tiler address of the view that it is interested in. This is passed to the paddr and p_uv_addr parameters in omap_overlay_info. It is also expected to provide the stride value based on the view's orientation and container type, this should be passed to the screen_width parameter of omap_overlay_info. In calc_tiler_rotation_offset screen_width is used to calculate the required row_inc for DISPC. x_predecim and y_predecim are also used to calculate row_inc and pix_inc thereby adding predecimation support for TILER. Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-05-11 20:49:55 +07:00
const enum omap_dss_rotation_type supported_rotation_types;
OMAP: DSS2: Fix FIFO threshold and burst size for OMAP4 The DMA FIFO threshold registers and burst size registers have changed for OMAP4. The current code only handles OMAP2/3 case, and so the values are a bit off for OMAP4. A summary of the differences between OMAP2/3 and OMAP4: Burst size: OMAP2/3: 4 x 32 bits / 8 x 32 bits / 16 x 32 bits OMAP4: 2 x 128 bits / 4 x 128 bits / 8 x 128 bits Threshold size: OMAP2/3: in bytes (8 bit units) OMAP4: in 128bit units This patch fixes the issue by creating two new helper functions in dss_features: dss_feat_get_buffer_size_unit() and dss_feat_get_burst_size_unit(). These return (in bytes) the unit size for threshold registers and unit size for burst size register, respectively, and are used to calculate correct values. For the threshold size the usage is straightforward. However, the burst size register has different multipliers for OMAP2/3 and OMAP4. This patch solves the problem by defining the multipliers for the burst size as 2x, 4x and 8x, which fit fine for the OMAP4 burst size definition (i.e. burst size unit for OMAP4 is 128bits), but requires a slight twist on OMAP2/3 by defining the burst size unit as 64bit. As the driver in practice always uses the maximum burst size, and no use case currently exists where we would want to use a smaller burst size, this patch changes the driver to hardcode the burst size when initializing DISPC. This makes the threshold configuration code somewhat simpler. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-06-21 13:35:36 +07:00
const u32 buffer_size_unit;
const u32 burst_size_unit;
};
/* This struct is assigned to one of the below during initialization */
static const struct omap_dss_features *omap_current_dss_features;
static const struct dss_reg_field omap2_dss_reg_fields[] = {
[FEAT_REG_FIRHINC] = { 11, 0 },
[FEAT_REG_FIRVINC] = { 27, 16 },
[FEAT_REG_FIFOLOWTHRESHOLD] = { 8, 0 },
[FEAT_REG_FIFOHIGHTHRESHOLD] = { 24, 16 },
[FEAT_REG_FIFOSIZE] = { 8, 0 },
[FEAT_REG_HORIZONTALACCU] = { 9, 0 },
[FEAT_REG_VERTICALACCU] = { 25, 16 },
[FEAT_REG_DISPC_CLK_SWITCH] = { 0, 0 },
[FEAT_REG_DSIPLL_REGN] = { 0, 0 },
[FEAT_REG_DSIPLL_REGM] = { 0, 0 },
[FEAT_REG_DSIPLL_REGM_DISPC] = { 0, 0 },
[FEAT_REG_DSIPLL_REGM_DSI] = { 0, 0 },
};
static const struct dss_reg_field omap3_dss_reg_fields[] = {
[FEAT_REG_FIRHINC] = { 12, 0 },
[FEAT_REG_FIRVINC] = { 28, 16 },
[FEAT_REG_FIFOLOWTHRESHOLD] = { 11, 0 },
[FEAT_REG_FIFOHIGHTHRESHOLD] = { 27, 16 },
[FEAT_REG_FIFOSIZE] = { 10, 0 },
[FEAT_REG_HORIZONTALACCU] = { 9, 0 },
[FEAT_REG_VERTICALACCU] = { 25, 16 },
[FEAT_REG_DISPC_CLK_SWITCH] = { 0, 0 },
[FEAT_REG_DSIPLL_REGN] = { 7, 1 },
[FEAT_REG_DSIPLL_REGM] = { 18, 8 },
[FEAT_REG_DSIPLL_REGM_DISPC] = { 22, 19 },
[FEAT_REG_DSIPLL_REGM_DSI] = { 26, 23 },
};
static const struct dss_reg_field omap4_dss_reg_fields[] = {
[FEAT_REG_FIRHINC] = { 12, 0 },
[FEAT_REG_FIRVINC] = { 28, 16 },
[FEAT_REG_FIFOLOWTHRESHOLD] = { 15, 0 },
[FEAT_REG_FIFOHIGHTHRESHOLD] = { 31, 16 },
[FEAT_REG_FIFOSIZE] = { 15, 0 },
[FEAT_REG_HORIZONTALACCU] = { 10, 0 },
[FEAT_REG_VERTICALACCU] = { 26, 16 },
[FEAT_REG_DISPC_CLK_SWITCH] = { 9, 8 },
[FEAT_REG_DSIPLL_REGN] = { 8, 1 },
[FEAT_REG_DSIPLL_REGM] = { 20, 9 },
[FEAT_REG_DSIPLL_REGM_DISPC] = { 25, 21 },
[FEAT_REG_DSIPLL_REGM_DSI] = { 30, 26 },
};
static const struct dss_reg_field omap5_dss_reg_fields[] = {
[FEAT_REG_FIRHINC] = { 12, 0 },
[FEAT_REG_FIRVINC] = { 28, 16 },
[FEAT_REG_FIFOLOWTHRESHOLD] = { 15, 0 },
[FEAT_REG_FIFOHIGHTHRESHOLD] = { 31, 16 },
[FEAT_REG_FIFOSIZE] = { 15, 0 },
[FEAT_REG_HORIZONTALACCU] = { 10, 0 },
[FEAT_REG_VERTICALACCU] = { 26, 16 },
[FEAT_REG_DISPC_CLK_SWITCH] = { 9, 7 },
[FEAT_REG_DSIPLL_REGN] = { 8, 1 },
[FEAT_REG_DSIPLL_REGM] = { 20, 9 },
[FEAT_REG_DSIPLL_REGM_DISPC] = { 25, 21 },
[FEAT_REG_DSIPLL_REGM_DSI] = { 30, 26 },
};
static const enum omap_display_type omap2_dss_supported_displays[] = {
/* OMAP_DSS_CHANNEL_LCD */
OMAP_DISPLAY_TYPE_DPI | OMAP_DISPLAY_TYPE_DBI,
/* OMAP_DSS_CHANNEL_DIGIT */
OMAP_DISPLAY_TYPE_VENC,
};
static const enum omap_display_type omap3430_dss_supported_displays[] = {
/* OMAP_DSS_CHANNEL_LCD */
OMAP_DISPLAY_TYPE_DPI | OMAP_DISPLAY_TYPE_DBI |
OMAP_DISPLAY_TYPE_SDI | OMAP_DISPLAY_TYPE_DSI,
/* OMAP_DSS_CHANNEL_DIGIT */
OMAP_DISPLAY_TYPE_VENC,
};
static const enum omap_display_type omap3630_dss_supported_displays[] = {
/* OMAP_DSS_CHANNEL_LCD */
OMAP_DISPLAY_TYPE_DPI | OMAP_DISPLAY_TYPE_DBI |
OMAP_DISPLAY_TYPE_DSI,
/* OMAP_DSS_CHANNEL_DIGIT */
OMAP_DISPLAY_TYPE_VENC,
};
static const enum omap_display_type omap4_dss_supported_displays[] = {
/* OMAP_DSS_CHANNEL_LCD */
OMAP_DISPLAY_TYPE_DBI | OMAP_DISPLAY_TYPE_DSI,
/* OMAP_DSS_CHANNEL_DIGIT */
OMAP_DISPLAY_TYPE_VENC | OMAP_DISPLAY_TYPE_HDMI,
/* OMAP_DSS_CHANNEL_LCD2 */
OMAP_DISPLAY_TYPE_DPI | OMAP_DISPLAY_TYPE_DBI |
OMAP_DISPLAY_TYPE_DSI,
};
static const enum omap_display_type omap5_dss_supported_displays[] = {
/* OMAP_DSS_CHANNEL_LCD */
OMAP_DISPLAY_TYPE_DPI | OMAP_DISPLAY_TYPE_DBI |
OMAP_DISPLAY_TYPE_DSI,
/* OMAP_DSS_CHANNEL_DIGIT */
OMAP_DISPLAY_TYPE_HDMI | OMAP_DISPLAY_TYPE_DPI,
/* OMAP_DSS_CHANNEL_LCD2 */
OMAP_DISPLAY_TYPE_DPI | OMAP_DISPLAY_TYPE_DBI |
OMAP_DISPLAY_TYPE_DSI,
};
static const enum omap_dss_output_id omap2_dss_supported_outputs[] = {
/* OMAP_DSS_CHANNEL_LCD */
OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI,
/* OMAP_DSS_CHANNEL_DIGIT */
OMAP_DSS_OUTPUT_VENC,
};
static const enum omap_dss_output_id omap3430_dss_supported_outputs[] = {
/* OMAP_DSS_CHANNEL_LCD */
OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI |
OMAP_DSS_OUTPUT_SDI | OMAP_DSS_OUTPUT_DSI1,
/* OMAP_DSS_CHANNEL_DIGIT */
OMAP_DSS_OUTPUT_VENC,
};
static const enum omap_dss_output_id omap3630_dss_supported_outputs[] = {
/* OMAP_DSS_CHANNEL_LCD */
OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI |
OMAP_DSS_OUTPUT_DSI1,
/* OMAP_DSS_CHANNEL_DIGIT */
OMAP_DSS_OUTPUT_VENC,
};
static const enum omap_dss_output_id omap4_dss_supported_outputs[] = {
/* OMAP_DSS_CHANNEL_LCD */
OMAP_DSS_OUTPUT_DBI | OMAP_DSS_OUTPUT_DSI1,
/* OMAP_DSS_CHANNEL_DIGIT */
OMAP_DSS_OUTPUT_VENC | OMAP_DSS_OUTPUT_HDMI,
/* OMAP_DSS_CHANNEL_LCD2 */
OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI |
OMAP_DSS_OUTPUT_DSI2,
};
static const enum omap_dss_output_id omap5_dss_supported_outputs[] = {
/* OMAP_DSS_CHANNEL_LCD */
OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI |
OMAP_DSS_OUTPUT_DSI1 | OMAP_DSS_OUTPUT_DSI2,
/* OMAP_DSS_CHANNEL_DIGIT */
OMAP_DSS_OUTPUT_HDMI | OMAP_DSS_OUTPUT_DPI,
/* OMAP_DSS_CHANNEL_LCD2 */
OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI |
OMAP_DSS_OUTPUT_DSI1,
/* OMAP_DSS_CHANNEL_LCD3 */
OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI |
OMAP_DSS_OUTPUT_DSI2,
};
static const enum omap_color_mode omap2_dss_supported_color_modes[] = {
/* OMAP_DSS_GFX */
OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 |
OMAP_DSS_COLOR_CLUT4 | OMAP_DSS_COLOR_CLUT8 |
OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_RGB16 |
OMAP_DSS_COLOR_RGB24U | OMAP_DSS_COLOR_RGB24P,
/* OMAP_DSS_VIDEO1 */
OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U |
OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_YUV2 |
OMAP_DSS_COLOR_UYVY,
/* OMAP_DSS_VIDEO2 */
OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U |
OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_YUV2 |
OMAP_DSS_COLOR_UYVY,
};
static const enum omap_color_mode omap3_dss_supported_color_modes[] = {
/* OMAP_DSS_GFX */
OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 |
OMAP_DSS_COLOR_CLUT4 | OMAP_DSS_COLOR_CLUT8 |
OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 |
OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U |
OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_ARGB32 |
OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32,
/* OMAP_DSS_VIDEO1 */
OMAP_DSS_COLOR_RGB24U | OMAP_DSS_COLOR_RGB24P |
OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_RGB16 |
OMAP_DSS_COLOR_YUV2 | OMAP_DSS_COLOR_UYVY,
/* OMAP_DSS_VIDEO2 */
OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 |
OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U |
OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_YUV2 |
OMAP_DSS_COLOR_UYVY | OMAP_DSS_COLOR_ARGB32 |
OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32,
};
static const enum omap_color_mode omap4_dss_supported_color_modes[] = {
/* OMAP_DSS_GFX */
OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 |
OMAP_DSS_COLOR_CLUT4 | OMAP_DSS_COLOR_CLUT8 |
OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 |
OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U |
OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_ARGB32 |
OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32 |
OMAP_DSS_COLOR_ARGB16_1555 | OMAP_DSS_COLOR_RGBX16 |
OMAP_DSS_COLOR_RGBA16 | OMAP_DSS_COLOR_XRGB16_1555,
/* OMAP_DSS_VIDEO1 */
OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB12U |
OMAP_DSS_COLOR_YUV2 | OMAP_DSS_COLOR_ARGB16_1555 |
OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_NV12 |
OMAP_DSS_COLOR_RGBA16 | OMAP_DSS_COLOR_RGB24U |
OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_UYVY |
OMAP_DSS_COLOR_ARGB16 | OMAP_DSS_COLOR_XRGB16_1555 |
OMAP_DSS_COLOR_ARGB32 | OMAP_DSS_COLOR_RGBX16 |
OMAP_DSS_COLOR_RGBX32,
/* OMAP_DSS_VIDEO2 */
OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB12U |
OMAP_DSS_COLOR_YUV2 | OMAP_DSS_COLOR_ARGB16_1555 |
OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_NV12 |
OMAP_DSS_COLOR_RGBA16 | OMAP_DSS_COLOR_RGB24U |
OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_UYVY |
OMAP_DSS_COLOR_ARGB16 | OMAP_DSS_COLOR_XRGB16_1555 |
OMAP_DSS_COLOR_ARGB32 | OMAP_DSS_COLOR_RGBX16 |
OMAP_DSS_COLOR_RGBX32,
/* OMAP_DSS_VIDEO3 */
OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB12U |
OMAP_DSS_COLOR_YUV2 | OMAP_DSS_COLOR_ARGB16_1555 |
OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_NV12 |
OMAP_DSS_COLOR_RGBA16 | OMAP_DSS_COLOR_RGB24U |
OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_UYVY |
OMAP_DSS_COLOR_ARGB16 | OMAP_DSS_COLOR_XRGB16_1555 |
OMAP_DSS_COLOR_ARGB32 | OMAP_DSS_COLOR_RGBX16 |
OMAP_DSS_COLOR_RGBX32,
/* OMAP_DSS_WB */
OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB12U |
OMAP_DSS_COLOR_YUV2 | OMAP_DSS_COLOR_ARGB16_1555 |
OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_NV12 |
OMAP_DSS_COLOR_RGBA16 | OMAP_DSS_COLOR_RGB24U |
OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_UYVY |
OMAP_DSS_COLOR_ARGB16 | OMAP_DSS_COLOR_XRGB16_1555 |
OMAP_DSS_COLOR_ARGB32 | OMAP_DSS_COLOR_RGBX16 |
OMAP_DSS_COLOR_RGBX32,
};
static const enum omap_overlay_caps omap2_dss_overlay_caps[] = {
/* OMAP_DSS_GFX */
OMAP_DSS_OVL_CAP_POS | OMAP_DSS_OVL_CAP_REPLICATION,
/* OMAP_DSS_VIDEO1 */
OMAP_DSS_OVL_CAP_SCALE | OMAP_DSS_OVL_CAP_POS |
OMAP_DSS_OVL_CAP_REPLICATION,
/* OMAP_DSS_VIDEO2 */
OMAP_DSS_OVL_CAP_SCALE | OMAP_DSS_OVL_CAP_POS |
OMAP_DSS_OVL_CAP_REPLICATION,
};
static const enum omap_overlay_caps omap3430_dss_overlay_caps[] = {
/* OMAP_DSS_GFX */
OMAP_DSS_OVL_CAP_GLOBAL_ALPHA | OMAP_DSS_OVL_CAP_POS |
OMAP_DSS_OVL_CAP_REPLICATION,
/* OMAP_DSS_VIDEO1 */
OMAP_DSS_OVL_CAP_SCALE | OMAP_DSS_OVL_CAP_POS |
OMAP_DSS_OVL_CAP_REPLICATION,
/* OMAP_DSS_VIDEO2 */
OMAP_DSS_OVL_CAP_SCALE | OMAP_DSS_OVL_CAP_GLOBAL_ALPHA |
OMAP_DSS_OVL_CAP_POS | OMAP_DSS_OVL_CAP_REPLICATION,
};
static const enum omap_overlay_caps omap3630_dss_overlay_caps[] = {
/* OMAP_DSS_GFX */
OMAP_DSS_OVL_CAP_GLOBAL_ALPHA | OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA |
OMAP_DSS_OVL_CAP_POS | OMAP_DSS_OVL_CAP_REPLICATION,
/* OMAP_DSS_VIDEO1 */
OMAP_DSS_OVL_CAP_SCALE | OMAP_DSS_OVL_CAP_POS |
OMAP_DSS_OVL_CAP_REPLICATION,
/* OMAP_DSS_VIDEO2 */
OMAP_DSS_OVL_CAP_SCALE | OMAP_DSS_OVL_CAP_GLOBAL_ALPHA |
OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA | OMAP_DSS_OVL_CAP_POS |
OMAP_DSS_OVL_CAP_REPLICATION,
};
static const enum omap_overlay_caps omap4_dss_overlay_caps[] = {
/* OMAP_DSS_GFX */
OMAPDSS/OMAP_VOUT: Fix incorrect OMAP3-alpha compatibility setting On OMAP3, in order to enable alpha blending for LCD and TV managers, we needed to set LCDALPHABLENDERENABLE/TVALPHABLENDERENABLE bits in DISPC_CONFIG. On OMAP4, alpha blending is always enabled by default, if the above bits are set, we switch to an OMAP3 compatibility mode where the zorder values in the pipeline attribute registers are ignored and a fixed priority is configured. Rename the manager_info member "alpha_enabled" to "partial_alpha_enabled" for more clarity. Introduce two dss_features FEAT_ALPHA_FIXED_ZORDER and FEAT_ALPHA_FREE_ZORDER which represent OMAP3-alpha compatibility mode and OMAP4 alpha mode respectively. Introduce an overlay cap for ZORDER. The DSS2 user is expected to check for the ZORDER cap, if an overlay doesn't have this cap, the user is expected to set the parameter partial_alpha_enabled. If the overlay has ZORDER cap, the DSS2 user can assume that alpha blending is already enabled. Don't support OMAP3 compatibility mode for now. Trying to read/write to alpha_blending_enabled sysfs attribute issues a warning for OMAP4 and does not set the LCDALPHABLENDERENABLE/TVALPHABLENDERENABLE bits. Change alpha_enabled to partial_alpha_enabled in the omap_vout driver. Use overlay cap "OMAP_DSS_OVL_CAP_GLOBAL_ALPHA" to check if overlay supports alpha blending or not. Replace this with checks for VIDEO1 pipeline. Cc: linux-media@vger.kernel.org Cc: Lajos Molnar <molnar@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Acked-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-26 13:17:29 +07:00
OMAP_DSS_OVL_CAP_GLOBAL_ALPHA | OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA |
OMAP_DSS_OVL_CAP_ZORDER | OMAP_DSS_OVL_CAP_POS |
OMAP_DSS_OVL_CAP_REPLICATION,
/* OMAP_DSS_VIDEO1 */
OMAP_DSS_OVL_CAP_SCALE | OMAP_DSS_OVL_CAP_GLOBAL_ALPHA |
OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA | OMAP_DSS_OVL_CAP_ZORDER |
OMAP_DSS_OVL_CAP_POS | OMAP_DSS_OVL_CAP_REPLICATION,
/* OMAP_DSS_VIDEO2 */
OMAP_DSS_OVL_CAP_SCALE | OMAP_DSS_OVL_CAP_GLOBAL_ALPHA |
OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA | OMAP_DSS_OVL_CAP_ZORDER |
OMAP_DSS_OVL_CAP_POS | OMAP_DSS_OVL_CAP_REPLICATION,
/* OMAP_DSS_VIDEO3 */
OMAP_DSS_OVL_CAP_SCALE | OMAP_DSS_OVL_CAP_GLOBAL_ALPHA |
OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA | OMAP_DSS_OVL_CAP_ZORDER |
OMAP_DSS_OVL_CAP_POS | OMAP_DSS_OVL_CAP_REPLICATION,
};
static const char * const omap2_dss_clk_source_names[] = {
[OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC] = "N/A",
[OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI] = "N/A",
[OMAP_DSS_CLK_SRC_FCK] = "DSS_FCLK1",
};
static const char * const omap3_dss_clk_source_names[] = {
[OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC] = "DSI1_PLL_FCLK",
[OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI] = "DSI2_PLL_FCLK",
[OMAP_DSS_CLK_SRC_FCK] = "DSS1_ALWON_FCLK",
};
static const char * const omap4_dss_clk_source_names[] = {
[OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC] = "PLL1_CLK1",
[OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI] = "PLL1_CLK2",
[OMAP_DSS_CLK_SRC_FCK] = "DSS_FCLK",
[OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC] = "PLL2_CLK1",
[OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DSI] = "PLL2_CLK2",
};
static const char * const omap5_dss_clk_source_names[] = {
[OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC] = "DPLL_DSI1_A_CLK1",
[OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI] = "DPLL_DSI1_A_CLK2",
[OMAP_DSS_CLK_SRC_FCK] = "DSS_CLK",
[OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC] = "DPLL_DSI1_C_CLK1",
[OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DSI] = "DPLL_DSI1_C_CLK2",
};
static const struct dss_param_range omap2_dss_param_range[] = {
[FEAT_PARAM_DSS_FCK] = { 0, 133000000 },
[FEAT_PARAM_DSS_PCD] = { 2, 255 },
[FEAT_PARAM_DSIPLL_REGN] = { 0, 0 },
[FEAT_PARAM_DSIPLL_REGM] = { 0, 0 },
[FEAT_PARAM_DSIPLL_REGM_DISPC] = { 0, 0 },
[FEAT_PARAM_DSIPLL_REGM_DSI] = { 0, 0 },
[FEAT_PARAM_DSIPLL_FINT] = { 0, 0 },
[FEAT_PARAM_DSIPLL_LPDIV] = { 0, 0 },
[FEAT_PARAM_DOWNSCALE] = { 1, 2 },
/*
* Assuming the line width buffer to be 768 pixels as OMAP2 DISPC
* scaler cannot scale a image with width more than 768.
*/
[FEAT_PARAM_LINEWIDTH] = { 1, 768 },
};
static const struct dss_param_range omap3_dss_param_range[] = {
[FEAT_PARAM_DSS_FCK] = { 0, 173000000 },
[FEAT_PARAM_DSS_PCD] = { 1, 255 },
[FEAT_PARAM_DSIPLL_REGN] = { 0, (1 << 7) - 1 },
[FEAT_PARAM_DSIPLL_REGM] = { 0, (1 << 11) - 1 },
[FEAT_PARAM_DSIPLL_REGM_DISPC] = { 0, (1 << 4) - 1 },
[FEAT_PARAM_DSIPLL_REGM_DSI] = { 0, (1 << 4) - 1 },
[FEAT_PARAM_DSIPLL_FINT] = { 750000, 2100000 },
[FEAT_PARAM_DSIPLL_LPDIV] = { 1, (1 << 13) - 1},
[FEAT_PARAM_DSI_FCK] = { 0, 173000000 },
[FEAT_PARAM_DOWNSCALE] = { 1, 4 },
[FEAT_PARAM_LINEWIDTH] = { 1, 1024 },
};
static const struct dss_param_range omap4_dss_param_range[] = {
[FEAT_PARAM_DSS_FCK] = { 0, 186000000 },
[FEAT_PARAM_DSS_PCD] = { 1, 255 },
[FEAT_PARAM_DSIPLL_REGN] = { 0, (1 << 8) - 1 },
[FEAT_PARAM_DSIPLL_REGM] = { 0, (1 << 12) - 1 },
[FEAT_PARAM_DSIPLL_REGM_DISPC] = { 0, (1 << 5) - 1 },
[FEAT_PARAM_DSIPLL_REGM_DSI] = { 0, (1 << 5) - 1 },
[FEAT_PARAM_DSIPLL_FINT] = { 500000, 2500000 },
[FEAT_PARAM_DSIPLL_LPDIV] = { 0, (1 << 13) - 1 },
[FEAT_PARAM_DSI_FCK] = { 0, 170000000 },
[FEAT_PARAM_DOWNSCALE] = { 1, 4 },
[FEAT_PARAM_LINEWIDTH] = { 1, 2048 },
};
static const struct dss_param_range omap5_dss_param_range[] = {
[FEAT_PARAM_DSS_FCK] = { 0, 209250000 },
[FEAT_PARAM_DSS_PCD] = { 1, 255 },
[FEAT_PARAM_DSIPLL_REGN] = { 0, (1 << 8) - 1 },
[FEAT_PARAM_DSIPLL_REGM] = { 0, (1 << 12) - 1 },
[FEAT_PARAM_DSIPLL_REGM_DISPC] = { 0, (1 << 5) - 1 },
[FEAT_PARAM_DSIPLL_REGM_DSI] = { 0, (1 << 5) - 1 },
[FEAT_PARAM_DSIPLL_FINT] = { 150000, 52000000 },
[FEAT_PARAM_DSIPLL_LPDIV] = { 0, (1 << 13) - 1 },
[FEAT_PARAM_DSI_FCK] = { 0, 209250000 },
[FEAT_PARAM_DOWNSCALE] = { 1, 4 },
[FEAT_PARAM_LINEWIDTH] = { 1, 2048 },
};
static const enum dss_feat_id omap2_dss_feat_list[] = {
FEAT_LCDENABLEPOL,
FEAT_LCDENABLESIGNAL,
FEAT_PCKFREEENABLE,
FEAT_FUNCGATED,
FEAT_ROWREPEATENABLE,
FEAT_RESIZECONF,
};
static const enum dss_feat_id omap3430_dss_feat_list[] = {
FEAT_LCDENABLEPOL,
FEAT_LCDENABLESIGNAL,
FEAT_PCKFREEENABLE,
FEAT_FUNCGATED,
FEAT_LINEBUFFERSPLIT,
FEAT_ROWREPEATENABLE,
FEAT_RESIZECONF,
FEAT_DSI_PLL_FREQSEL,
FEAT_DSI_REVERSE_TXCLKESC,
FEAT_VENC_REQUIRES_TV_DAC_CLK,
FEAT_CPR,
FEAT_PRELOAD,
FEAT_FIR_COEF_V,
FEAT_ALPHA_FIXED_ZORDER,
FEAT_FIFO_MERGE,
FEAT_OMAP3_DSI_FIFO_BUG,
FEAT_DPI_USES_VDDS_DSI,
};
static const enum dss_feat_id am35xx_dss_feat_list[] = {
FEAT_LCDENABLEPOL,
FEAT_LCDENABLESIGNAL,
FEAT_PCKFREEENABLE,
FEAT_FUNCGATED,
FEAT_LINEBUFFERSPLIT,
FEAT_ROWREPEATENABLE,
FEAT_RESIZECONF,
FEAT_DSI_PLL_FREQSEL,
FEAT_DSI_REVERSE_TXCLKESC,
FEAT_VENC_REQUIRES_TV_DAC_CLK,
FEAT_CPR,
FEAT_PRELOAD,
FEAT_FIR_COEF_V,
FEAT_ALPHA_FIXED_ZORDER,
FEAT_FIFO_MERGE,
FEAT_OMAP3_DSI_FIFO_BUG,
};
static const enum dss_feat_id omap3630_dss_feat_list[] = {
FEAT_LCDENABLEPOL,
FEAT_LCDENABLESIGNAL,
FEAT_PCKFREEENABLE,
FEAT_FUNCGATED,
FEAT_LINEBUFFERSPLIT,
FEAT_ROWREPEATENABLE,
FEAT_RESIZECONF,
FEAT_DSI_PLL_PWR_BUG,
FEAT_DSI_PLL_FREQSEL,
FEAT_CPR,
FEAT_PRELOAD,
FEAT_FIR_COEF_V,
FEAT_ALPHA_FIXED_ZORDER,
FEAT_FIFO_MERGE,
FEAT_OMAP3_DSI_FIFO_BUG,
FEAT_DPI_USES_VDDS_DSI,
};
static const enum dss_feat_id omap4430_es1_0_dss_feat_list[] = {
FEAT_MGR_LCD2,
FEAT_CORE_CLK_DIV,
FEAT_LCD_CLK_SRC,
FEAT_DSI_DCS_CMD_CONFIG_VC,
FEAT_DSI_VC_OCP_WIDTH,
FEAT_DSI_GNQ,
FEAT_HANDLE_UV_SEPARATE,
FEAT_ATTR2,
FEAT_CPR,
FEAT_PRELOAD,
FEAT_FIR_COEF_V,
FEAT_ALPHA_FREE_ZORDER,
FEAT_FIFO_MERGE,
OMAPDSS: DISPC: Support rotation through TILER TILER is a block in OMAP4's DMM which lets DSS fetch frames in a rotated manner. Physical memory can be mapped to a portion of OMAP's system address space called TILER address space. The TILER address space is split into 8 views. Each view represents a rotated or mirrored form of the mapped physical memory. When a DISPC overlay's base address is programmed to one of these views, the TILER fetches the pixels according to the orientation of the view. A view is further split into 4 containers, each container holds elements of a particular size. Rotation can be achieved at the granularity of elements in the container. For more information on TILER, refer to the Memory Subsytem section in OMAP4 TRM. Rotation type TILER has been added which is used to exploit the capabilities of these 8 views for performing various rotations. When fetching from addresses mapped to TILER space, the DISPC DMA can fetch pixels in either 1D or 2D bursts. The fetch depends on which TILER container we are accessing. Accessing 8, 16 and 32 bit sized containers requires 2D bursts, and page mode sized containers require 1D bursts. The DSS2 user is expected to provide the Tiler address of the view that it is interested in. This is passed to the paddr and p_uv_addr parameters in omap_overlay_info. It is also expected to provide the stride value based on the view's orientation and container type, this should be passed to the screen_width parameter of omap_overlay_info. In calc_tiler_rotation_offset screen_width is used to calculate the required row_inc for DISPC. x_predecim and y_predecim are also used to calculate row_inc and pix_inc thereby adding predecimation support for TILER. Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-05-11 20:49:55 +07:00
FEAT_BURST_2D,
};
static const enum dss_feat_id omap4430_es2_0_1_2_dss_feat_list[] = {
FEAT_MGR_LCD2,
FEAT_CORE_CLK_DIV,
FEAT_LCD_CLK_SRC,
FEAT_DSI_DCS_CMD_CONFIG_VC,
FEAT_DSI_VC_OCP_WIDTH,
FEAT_DSI_GNQ,
FEAT_HDMI_CTS_SWMODE,
FEAT_HANDLE_UV_SEPARATE,
FEAT_ATTR2,
FEAT_CPR,
FEAT_PRELOAD,
FEAT_FIR_COEF_V,
FEAT_ALPHA_FREE_ZORDER,
FEAT_FIFO_MERGE,
OMAPDSS: DISPC: Support rotation through TILER TILER is a block in OMAP4's DMM which lets DSS fetch frames in a rotated manner. Physical memory can be mapped to a portion of OMAP's system address space called TILER address space. The TILER address space is split into 8 views. Each view represents a rotated or mirrored form of the mapped physical memory. When a DISPC overlay's base address is programmed to one of these views, the TILER fetches the pixels according to the orientation of the view. A view is further split into 4 containers, each container holds elements of a particular size. Rotation can be achieved at the granularity of elements in the container. For more information on TILER, refer to the Memory Subsytem section in OMAP4 TRM. Rotation type TILER has been added which is used to exploit the capabilities of these 8 views for performing various rotations. When fetching from addresses mapped to TILER space, the DISPC DMA can fetch pixels in either 1D or 2D bursts. The fetch depends on which TILER container we are accessing. Accessing 8, 16 and 32 bit sized containers requires 2D bursts, and page mode sized containers require 1D bursts. The DSS2 user is expected to provide the Tiler address of the view that it is interested in. This is passed to the paddr and p_uv_addr parameters in omap_overlay_info. It is also expected to provide the stride value based on the view's orientation and container type, this should be passed to the screen_width parameter of omap_overlay_info. In calc_tiler_rotation_offset screen_width is used to calculate the required row_inc for DISPC. x_predecim and y_predecim are also used to calculate row_inc and pix_inc thereby adding predecimation support for TILER. Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-05-11 20:49:55 +07:00
FEAT_BURST_2D,
};
static const enum dss_feat_id omap4_dss_feat_list[] = {
FEAT_MGR_LCD2,
FEAT_CORE_CLK_DIV,
FEAT_LCD_CLK_SRC,
FEAT_DSI_DCS_CMD_CONFIG_VC,
FEAT_DSI_VC_OCP_WIDTH,
FEAT_DSI_GNQ,
FEAT_HDMI_CTS_SWMODE,
FEAT_HDMI_AUDIO_USE_MCLK,
FEAT_HANDLE_UV_SEPARATE,
FEAT_ATTR2,
FEAT_CPR,
FEAT_PRELOAD,
FEAT_FIR_COEF_V,
FEAT_ALPHA_FREE_ZORDER,
FEAT_FIFO_MERGE,
OMAPDSS: DISPC: Support rotation through TILER TILER is a block in OMAP4's DMM which lets DSS fetch frames in a rotated manner. Physical memory can be mapped to a portion of OMAP's system address space called TILER address space. The TILER address space is split into 8 views. Each view represents a rotated or mirrored form of the mapped physical memory. When a DISPC overlay's base address is programmed to one of these views, the TILER fetches the pixels according to the orientation of the view. A view is further split into 4 containers, each container holds elements of a particular size. Rotation can be achieved at the granularity of elements in the container. For more information on TILER, refer to the Memory Subsytem section in OMAP4 TRM. Rotation type TILER has been added which is used to exploit the capabilities of these 8 views for performing various rotations. When fetching from addresses mapped to TILER space, the DISPC DMA can fetch pixels in either 1D or 2D bursts. The fetch depends on which TILER container we are accessing. Accessing 8, 16 and 32 bit sized containers requires 2D bursts, and page mode sized containers require 1D bursts. The DSS2 user is expected to provide the Tiler address of the view that it is interested in. This is passed to the paddr and p_uv_addr parameters in omap_overlay_info. It is also expected to provide the stride value based on the view's orientation and container type, this should be passed to the screen_width parameter of omap_overlay_info. In calc_tiler_rotation_offset screen_width is used to calculate the required row_inc for DISPC. x_predecim and y_predecim are also used to calculate row_inc and pix_inc thereby adding predecimation support for TILER. Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-05-11 20:49:55 +07:00
FEAT_BURST_2D,
};
static const enum dss_feat_id omap5_dss_feat_list[] = {
FEAT_MGR_LCD2,
FEAT_CORE_CLK_DIV,
FEAT_LCD_CLK_SRC,
FEAT_DSI_DCS_CMD_CONFIG_VC,
FEAT_DSI_VC_OCP_WIDTH,
FEAT_DSI_GNQ,
FEAT_HDMI_CTS_SWMODE,
FEAT_HDMI_AUDIO_USE_MCLK,
FEAT_HANDLE_UV_SEPARATE,
FEAT_ATTR2,
FEAT_CPR,
FEAT_PRELOAD,
FEAT_FIR_COEF_V,
FEAT_ALPHA_FREE_ZORDER,
FEAT_FIFO_MERGE,
FEAT_BURST_2D,
FEAT_DSI_PLL_SELFREQDCO,
FEAT_DSI_PLL_REFSEL,
FEAT_DSI_PHY_DCC,
FEAT_MFLAG,
};
/* OMAP2 DSS Features */
static const struct omap_dss_features omap2_dss_features = {
.reg_fields = omap2_dss_reg_fields,
.num_reg_fields = ARRAY_SIZE(omap2_dss_reg_fields),
.features = omap2_dss_feat_list,
.num_features = ARRAY_SIZE(omap2_dss_feat_list),
.num_mgrs = 2,
.num_ovls = 3,
.supported_displays = omap2_dss_supported_displays,
.supported_outputs = omap2_dss_supported_outputs,
.supported_color_modes = omap2_dss_supported_color_modes,
.overlay_caps = omap2_dss_overlay_caps,
.clksrc_names = omap2_dss_clk_source_names,
.dss_params = omap2_dss_param_range,
OMAPDSS: DISPC: Support rotation through TILER TILER is a block in OMAP4's DMM which lets DSS fetch frames in a rotated manner. Physical memory can be mapped to a portion of OMAP's system address space called TILER address space. The TILER address space is split into 8 views. Each view represents a rotated or mirrored form of the mapped physical memory. When a DISPC overlay's base address is programmed to one of these views, the TILER fetches the pixels according to the orientation of the view. A view is further split into 4 containers, each container holds elements of a particular size. Rotation can be achieved at the granularity of elements in the container. For more information on TILER, refer to the Memory Subsytem section in OMAP4 TRM. Rotation type TILER has been added which is used to exploit the capabilities of these 8 views for performing various rotations. When fetching from addresses mapped to TILER space, the DISPC DMA can fetch pixels in either 1D or 2D bursts. The fetch depends on which TILER container we are accessing. Accessing 8, 16 and 32 bit sized containers requires 2D bursts, and page mode sized containers require 1D bursts. The DSS2 user is expected to provide the Tiler address of the view that it is interested in. This is passed to the paddr and p_uv_addr parameters in omap_overlay_info. It is also expected to provide the stride value based on the view's orientation and container type, this should be passed to the screen_width parameter of omap_overlay_info. In calc_tiler_rotation_offset screen_width is used to calculate the required row_inc for DISPC. x_predecim and y_predecim are also used to calculate row_inc and pix_inc thereby adding predecimation support for TILER. Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-05-11 20:49:55 +07:00
.supported_rotation_types = OMAP_DSS_ROT_DMA | OMAP_DSS_ROT_VRFB,
OMAP: DSS2: Fix FIFO threshold and burst size for OMAP4 The DMA FIFO threshold registers and burst size registers have changed for OMAP4. The current code only handles OMAP2/3 case, and so the values are a bit off for OMAP4. A summary of the differences between OMAP2/3 and OMAP4: Burst size: OMAP2/3: 4 x 32 bits / 8 x 32 bits / 16 x 32 bits OMAP4: 2 x 128 bits / 4 x 128 bits / 8 x 128 bits Threshold size: OMAP2/3: in bytes (8 bit units) OMAP4: in 128bit units This patch fixes the issue by creating two new helper functions in dss_features: dss_feat_get_buffer_size_unit() and dss_feat_get_burst_size_unit(). These return (in bytes) the unit size for threshold registers and unit size for burst size register, respectively, and are used to calculate correct values. For the threshold size the usage is straightforward. However, the burst size register has different multipliers for OMAP2/3 and OMAP4. This patch solves the problem by defining the multipliers for the burst size as 2x, 4x and 8x, which fit fine for the OMAP4 burst size definition (i.e. burst size unit for OMAP4 is 128bits), but requires a slight twist on OMAP2/3 by defining the burst size unit as 64bit. As the driver in practice always uses the maximum burst size, and no use case currently exists where we would want to use a smaller burst size, this patch changes the driver to hardcode the burst size when initializing DISPC. This makes the threshold configuration code somewhat simpler. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-06-21 13:35:36 +07:00
.buffer_size_unit = 1,
.burst_size_unit = 8,
};
/* OMAP3 DSS Features */
static const struct omap_dss_features omap3430_dss_features = {
.reg_fields = omap3_dss_reg_fields,
.num_reg_fields = ARRAY_SIZE(omap3_dss_reg_fields),
.features = omap3430_dss_feat_list,
.num_features = ARRAY_SIZE(omap3430_dss_feat_list),
.num_mgrs = 2,
.num_ovls = 3,
.supported_displays = omap3430_dss_supported_displays,
.supported_outputs = omap3430_dss_supported_outputs,
.supported_color_modes = omap3_dss_supported_color_modes,
.overlay_caps = omap3430_dss_overlay_caps,
.clksrc_names = omap3_dss_clk_source_names,
.dss_params = omap3_dss_param_range,
OMAPDSS: DISPC: Support rotation through TILER TILER is a block in OMAP4's DMM which lets DSS fetch frames in a rotated manner. Physical memory can be mapped to a portion of OMAP's system address space called TILER address space. The TILER address space is split into 8 views. Each view represents a rotated or mirrored form of the mapped physical memory. When a DISPC overlay's base address is programmed to one of these views, the TILER fetches the pixels according to the orientation of the view. A view is further split into 4 containers, each container holds elements of a particular size. Rotation can be achieved at the granularity of elements in the container. For more information on TILER, refer to the Memory Subsytem section in OMAP4 TRM. Rotation type TILER has been added which is used to exploit the capabilities of these 8 views for performing various rotations. When fetching from addresses mapped to TILER space, the DISPC DMA can fetch pixels in either 1D or 2D bursts. The fetch depends on which TILER container we are accessing. Accessing 8, 16 and 32 bit sized containers requires 2D bursts, and page mode sized containers require 1D bursts. The DSS2 user is expected to provide the Tiler address of the view that it is interested in. This is passed to the paddr and p_uv_addr parameters in omap_overlay_info. It is also expected to provide the stride value based on the view's orientation and container type, this should be passed to the screen_width parameter of omap_overlay_info. In calc_tiler_rotation_offset screen_width is used to calculate the required row_inc for DISPC. x_predecim and y_predecim are also used to calculate row_inc and pix_inc thereby adding predecimation support for TILER. Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-05-11 20:49:55 +07:00
.supported_rotation_types = OMAP_DSS_ROT_DMA | OMAP_DSS_ROT_VRFB,
OMAP: DSS2: Fix FIFO threshold and burst size for OMAP4 The DMA FIFO threshold registers and burst size registers have changed for OMAP4. The current code only handles OMAP2/3 case, and so the values are a bit off for OMAP4. A summary of the differences between OMAP2/3 and OMAP4: Burst size: OMAP2/3: 4 x 32 bits / 8 x 32 bits / 16 x 32 bits OMAP4: 2 x 128 bits / 4 x 128 bits / 8 x 128 bits Threshold size: OMAP2/3: in bytes (8 bit units) OMAP4: in 128bit units This patch fixes the issue by creating two new helper functions in dss_features: dss_feat_get_buffer_size_unit() and dss_feat_get_burst_size_unit(). These return (in bytes) the unit size for threshold registers and unit size for burst size register, respectively, and are used to calculate correct values. For the threshold size the usage is straightforward. However, the burst size register has different multipliers for OMAP2/3 and OMAP4. This patch solves the problem by defining the multipliers for the burst size as 2x, 4x and 8x, which fit fine for the OMAP4 burst size definition (i.e. burst size unit for OMAP4 is 128bits), but requires a slight twist on OMAP2/3 by defining the burst size unit as 64bit. As the driver in practice always uses the maximum burst size, and no use case currently exists where we would want to use a smaller burst size, this patch changes the driver to hardcode the burst size when initializing DISPC. This makes the threshold configuration code somewhat simpler. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-06-21 13:35:36 +07:00
.buffer_size_unit = 1,
.burst_size_unit = 8,
};
/*
* AM35xx DSS Features. This is basically OMAP3 DSS Features without the
* vdds_dsi regulator.
*/
static const struct omap_dss_features am35xx_dss_features = {
.reg_fields = omap3_dss_reg_fields,
.num_reg_fields = ARRAY_SIZE(omap3_dss_reg_fields),
.features = am35xx_dss_feat_list,
.num_features = ARRAY_SIZE(am35xx_dss_feat_list),
.num_mgrs = 2,
.num_ovls = 3,
.supported_displays = omap3430_dss_supported_displays,
.supported_outputs = omap3430_dss_supported_outputs,
.supported_color_modes = omap3_dss_supported_color_modes,
.overlay_caps = omap3430_dss_overlay_caps,
.clksrc_names = omap3_dss_clk_source_names,
.dss_params = omap3_dss_param_range,
.supported_rotation_types = OMAP_DSS_ROT_DMA | OMAP_DSS_ROT_VRFB,
.buffer_size_unit = 1,
.burst_size_unit = 8,
};
static const struct omap_dss_features omap3630_dss_features = {
.reg_fields = omap3_dss_reg_fields,
.num_reg_fields = ARRAY_SIZE(omap3_dss_reg_fields),
.features = omap3630_dss_feat_list,
.num_features = ARRAY_SIZE(omap3630_dss_feat_list),
.num_mgrs = 2,
.num_ovls = 3,
.supported_displays = omap3630_dss_supported_displays,
.supported_outputs = omap3630_dss_supported_outputs,
.supported_color_modes = omap3_dss_supported_color_modes,
.overlay_caps = omap3630_dss_overlay_caps,
.clksrc_names = omap3_dss_clk_source_names,
.dss_params = omap3_dss_param_range,
OMAPDSS: DISPC: Support rotation through TILER TILER is a block in OMAP4's DMM which lets DSS fetch frames in a rotated manner. Physical memory can be mapped to a portion of OMAP's system address space called TILER address space. The TILER address space is split into 8 views. Each view represents a rotated or mirrored form of the mapped physical memory. When a DISPC overlay's base address is programmed to one of these views, the TILER fetches the pixels according to the orientation of the view. A view is further split into 4 containers, each container holds elements of a particular size. Rotation can be achieved at the granularity of elements in the container. For more information on TILER, refer to the Memory Subsytem section in OMAP4 TRM. Rotation type TILER has been added which is used to exploit the capabilities of these 8 views for performing various rotations. When fetching from addresses mapped to TILER space, the DISPC DMA can fetch pixels in either 1D or 2D bursts. The fetch depends on which TILER container we are accessing. Accessing 8, 16 and 32 bit sized containers requires 2D bursts, and page mode sized containers require 1D bursts. The DSS2 user is expected to provide the Tiler address of the view that it is interested in. This is passed to the paddr and p_uv_addr parameters in omap_overlay_info. It is also expected to provide the stride value based on the view's orientation and container type, this should be passed to the screen_width parameter of omap_overlay_info. In calc_tiler_rotation_offset screen_width is used to calculate the required row_inc for DISPC. x_predecim and y_predecim are also used to calculate row_inc and pix_inc thereby adding predecimation support for TILER. Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-05-11 20:49:55 +07:00
.supported_rotation_types = OMAP_DSS_ROT_DMA | OMAP_DSS_ROT_VRFB,
OMAP: DSS2: Fix FIFO threshold and burst size for OMAP4 The DMA FIFO threshold registers and burst size registers have changed for OMAP4. The current code only handles OMAP2/3 case, and so the values are a bit off for OMAP4. A summary of the differences between OMAP2/3 and OMAP4: Burst size: OMAP2/3: 4 x 32 bits / 8 x 32 bits / 16 x 32 bits OMAP4: 2 x 128 bits / 4 x 128 bits / 8 x 128 bits Threshold size: OMAP2/3: in bytes (8 bit units) OMAP4: in 128bit units This patch fixes the issue by creating two new helper functions in dss_features: dss_feat_get_buffer_size_unit() and dss_feat_get_burst_size_unit(). These return (in bytes) the unit size for threshold registers and unit size for burst size register, respectively, and are used to calculate correct values. For the threshold size the usage is straightforward. However, the burst size register has different multipliers for OMAP2/3 and OMAP4. This patch solves the problem by defining the multipliers for the burst size as 2x, 4x and 8x, which fit fine for the OMAP4 burst size definition (i.e. burst size unit for OMAP4 is 128bits), but requires a slight twist on OMAP2/3 by defining the burst size unit as 64bit. As the driver in practice always uses the maximum burst size, and no use case currently exists where we would want to use a smaller burst size, this patch changes the driver to hardcode the burst size when initializing DISPC. This makes the threshold configuration code somewhat simpler. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-06-21 13:35:36 +07:00
.buffer_size_unit = 1,
.burst_size_unit = 8,
};
/* OMAP4 DSS Features */
/* For OMAP4430 ES 1.0 revision */
static const struct omap_dss_features omap4430_es1_0_dss_features = {
.reg_fields = omap4_dss_reg_fields,
.num_reg_fields = ARRAY_SIZE(omap4_dss_reg_fields),
.features = omap4430_es1_0_dss_feat_list,
.num_features = ARRAY_SIZE(omap4430_es1_0_dss_feat_list),
.num_mgrs = 3,
.num_ovls = 4,
.num_wbs = 1,
.supported_displays = omap4_dss_supported_displays,
.supported_outputs = omap4_dss_supported_outputs,
.supported_color_modes = omap4_dss_supported_color_modes,
.overlay_caps = omap4_dss_overlay_caps,
.clksrc_names = omap4_dss_clk_source_names,
.dss_params = omap4_dss_param_range,
OMAPDSS: DISPC: Support rotation through TILER TILER is a block in OMAP4's DMM which lets DSS fetch frames in a rotated manner. Physical memory can be mapped to a portion of OMAP's system address space called TILER address space. The TILER address space is split into 8 views. Each view represents a rotated or mirrored form of the mapped physical memory. When a DISPC overlay's base address is programmed to one of these views, the TILER fetches the pixels according to the orientation of the view. A view is further split into 4 containers, each container holds elements of a particular size. Rotation can be achieved at the granularity of elements in the container. For more information on TILER, refer to the Memory Subsytem section in OMAP4 TRM. Rotation type TILER has been added which is used to exploit the capabilities of these 8 views for performing various rotations. When fetching from addresses mapped to TILER space, the DISPC DMA can fetch pixels in either 1D or 2D bursts. The fetch depends on which TILER container we are accessing. Accessing 8, 16 and 32 bit sized containers requires 2D bursts, and page mode sized containers require 1D bursts. The DSS2 user is expected to provide the Tiler address of the view that it is interested in. This is passed to the paddr and p_uv_addr parameters in omap_overlay_info. It is also expected to provide the stride value based on the view's orientation and container type, this should be passed to the screen_width parameter of omap_overlay_info. In calc_tiler_rotation_offset screen_width is used to calculate the required row_inc for DISPC. x_predecim and y_predecim are also used to calculate row_inc and pix_inc thereby adding predecimation support for TILER. Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-05-11 20:49:55 +07:00
.supported_rotation_types = OMAP_DSS_ROT_DMA | OMAP_DSS_ROT_TILER,
OMAP: DSS2: Fix FIFO threshold and burst size for OMAP4 The DMA FIFO threshold registers and burst size registers have changed for OMAP4. The current code only handles OMAP2/3 case, and so the values are a bit off for OMAP4. A summary of the differences between OMAP2/3 and OMAP4: Burst size: OMAP2/3: 4 x 32 bits / 8 x 32 bits / 16 x 32 bits OMAP4: 2 x 128 bits / 4 x 128 bits / 8 x 128 bits Threshold size: OMAP2/3: in bytes (8 bit units) OMAP4: in 128bit units This patch fixes the issue by creating two new helper functions in dss_features: dss_feat_get_buffer_size_unit() and dss_feat_get_burst_size_unit(). These return (in bytes) the unit size for threshold registers and unit size for burst size register, respectively, and are used to calculate correct values. For the threshold size the usage is straightforward. However, the burst size register has different multipliers for OMAP2/3 and OMAP4. This patch solves the problem by defining the multipliers for the burst size as 2x, 4x and 8x, which fit fine for the OMAP4 burst size definition (i.e. burst size unit for OMAP4 is 128bits), but requires a slight twist on OMAP2/3 by defining the burst size unit as 64bit. As the driver in practice always uses the maximum burst size, and no use case currently exists where we would want to use a smaller burst size, this patch changes the driver to hardcode the burst size when initializing DISPC. This makes the threshold configuration code somewhat simpler. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-06-21 13:35:36 +07:00
.buffer_size_unit = 16,
.burst_size_unit = 16,
};
/* For OMAP4430 ES 2.0, 2.1 and 2.2 revisions */
static const struct omap_dss_features omap4430_es2_0_1_2_dss_features = {
.reg_fields = omap4_dss_reg_fields,
.num_reg_fields = ARRAY_SIZE(omap4_dss_reg_fields),
.features = omap4430_es2_0_1_2_dss_feat_list,
.num_features = ARRAY_SIZE(omap4430_es2_0_1_2_dss_feat_list),
.num_mgrs = 3,
.num_ovls = 4,
.num_wbs = 1,
.supported_displays = omap4_dss_supported_displays,
.supported_outputs = omap4_dss_supported_outputs,
.supported_color_modes = omap4_dss_supported_color_modes,
.overlay_caps = omap4_dss_overlay_caps,
.clksrc_names = omap4_dss_clk_source_names,
.dss_params = omap4_dss_param_range,
OMAPDSS: DISPC: Support rotation through TILER TILER is a block in OMAP4's DMM which lets DSS fetch frames in a rotated manner. Physical memory can be mapped to a portion of OMAP's system address space called TILER address space. The TILER address space is split into 8 views. Each view represents a rotated or mirrored form of the mapped physical memory. When a DISPC overlay's base address is programmed to one of these views, the TILER fetches the pixels according to the orientation of the view. A view is further split into 4 containers, each container holds elements of a particular size. Rotation can be achieved at the granularity of elements in the container. For more information on TILER, refer to the Memory Subsytem section in OMAP4 TRM. Rotation type TILER has been added which is used to exploit the capabilities of these 8 views for performing various rotations. When fetching from addresses mapped to TILER space, the DISPC DMA can fetch pixels in either 1D or 2D bursts. The fetch depends on which TILER container we are accessing. Accessing 8, 16 and 32 bit sized containers requires 2D bursts, and page mode sized containers require 1D bursts. The DSS2 user is expected to provide the Tiler address of the view that it is interested in. This is passed to the paddr and p_uv_addr parameters in omap_overlay_info. It is also expected to provide the stride value based on the view's orientation and container type, this should be passed to the screen_width parameter of omap_overlay_info. In calc_tiler_rotation_offset screen_width is used to calculate the required row_inc for DISPC. x_predecim and y_predecim are also used to calculate row_inc and pix_inc thereby adding predecimation support for TILER. Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-05-11 20:49:55 +07:00
.supported_rotation_types = OMAP_DSS_ROT_DMA | OMAP_DSS_ROT_TILER,
.buffer_size_unit = 16,
.burst_size_unit = 16,
};
/* For all the other OMAP4 versions */
static const struct omap_dss_features omap4_dss_features = {
.reg_fields = omap4_dss_reg_fields,
.num_reg_fields = ARRAY_SIZE(omap4_dss_reg_fields),
.features = omap4_dss_feat_list,
.num_features = ARRAY_SIZE(omap4_dss_feat_list),
.num_mgrs = 3,
.num_ovls = 4,
.num_wbs = 1,
.supported_displays = omap4_dss_supported_displays,
.supported_outputs = omap4_dss_supported_outputs,
.supported_color_modes = omap4_dss_supported_color_modes,
.overlay_caps = omap4_dss_overlay_caps,
.clksrc_names = omap4_dss_clk_source_names,
.dss_params = omap4_dss_param_range,
OMAPDSS: DISPC: Support rotation through TILER TILER is a block in OMAP4's DMM which lets DSS fetch frames in a rotated manner. Physical memory can be mapped to a portion of OMAP's system address space called TILER address space. The TILER address space is split into 8 views. Each view represents a rotated or mirrored form of the mapped physical memory. When a DISPC overlay's base address is programmed to one of these views, the TILER fetches the pixels according to the orientation of the view. A view is further split into 4 containers, each container holds elements of a particular size. Rotation can be achieved at the granularity of elements in the container. For more information on TILER, refer to the Memory Subsytem section in OMAP4 TRM. Rotation type TILER has been added which is used to exploit the capabilities of these 8 views for performing various rotations. When fetching from addresses mapped to TILER space, the DISPC DMA can fetch pixels in either 1D or 2D bursts. The fetch depends on which TILER container we are accessing. Accessing 8, 16 and 32 bit sized containers requires 2D bursts, and page mode sized containers require 1D bursts. The DSS2 user is expected to provide the Tiler address of the view that it is interested in. This is passed to the paddr and p_uv_addr parameters in omap_overlay_info. It is also expected to provide the stride value based on the view's orientation and container type, this should be passed to the screen_width parameter of omap_overlay_info. In calc_tiler_rotation_offset screen_width is used to calculate the required row_inc for DISPC. x_predecim and y_predecim are also used to calculate row_inc and pix_inc thereby adding predecimation support for TILER. Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-05-11 20:49:55 +07:00
.supported_rotation_types = OMAP_DSS_ROT_DMA | OMAP_DSS_ROT_TILER,
OMAP: DSS2: Fix FIFO threshold and burst size for OMAP4 The DMA FIFO threshold registers and burst size registers have changed for OMAP4. The current code only handles OMAP2/3 case, and so the values are a bit off for OMAP4. A summary of the differences between OMAP2/3 and OMAP4: Burst size: OMAP2/3: 4 x 32 bits / 8 x 32 bits / 16 x 32 bits OMAP4: 2 x 128 bits / 4 x 128 bits / 8 x 128 bits Threshold size: OMAP2/3: in bytes (8 bit units) OMAP4: in 128bit units This patch fixes the issue by creating two new helper functions in dss_features: dss_feat_get_buffer_size_unit() and dss_feat_get_burst_size_unit(). These return (in bytes) the unit size for threshold registers and unit size for burst size register, respectively, and are used to calculate correct values. For the threshold size the usage is straightforward. However, the burst size register has different multipliers for OMAP2/3 and OMAP4. This patch solves the problem by defining the multipliers for the burst size as 2x, 4x and 8x, which fit fine for the OMAP4 burst size definition (i.e. burst size unit for OMAP4 is 128bits), but requires a slight twist on OMAP2/3 by defining the burst size unit as 64bit. As the driver in practice always uses the maximum burst size, and no use case currently exists where we would want to use a smaller burst size, this patch changes the driver to hardcode the burst size when initializing DISPC. This makes the threshold configuration code somewhat simpler. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-06-21 13:35:36 +07:00
.buffer_size_unit = 16,
.burst_size_unit = 16,
};
/* OMAP5 DSS Features */
static const struct omap_dss_features omap5_dss_features = {
.reg_fields = omap5_dss_reg_fields,
.num_reg_fields = ARRAY_SIZE(omap5_dss_reg_fields),
.features = omap5_dss_feat_list,
.num_features = ARRAY_SIZE(omap5_dss_feat_list),
.num_mgrs = 3,
.num_ovls = 4,
.supported_displays = omap5_dss_supported_displays,
.supported_outputs = omap5_dss_supported_outputs,
.supported_color_modes = omap4_dss_supported_color_modes,
.overlay_caps = omap4_dss_overlay_caps,
.clksrc_names = omap5_dss_clk_source_names,
.dss_params = omap5_dss_param_range,
.supported_rotation_types = OMAP_DSS_ROT_DMA | OMAP_DSS_ROT_TILER,
.buffer_size_unit = 16,
.burst_size_unit = 16,
};
/* Functions returning values related to a DSS feature */
int dss_feat_get_num_mgrs(void)
{
return omap_current_dss_features->num_mgrs;
}
EXPORT_SYMBOL(dss_feat_get_num_mgrs);
int dss_feat_get_num_ovls(void)
{
return omap_current_dss_features->num_ovls;
}
EXPORT_SYMBOL(dss_feat_get_num_ovls);
int dss_feat_get_num_wbs(void)
{
return omap_current_dss_features->num_wbs;
}
unsigned long dss_feat_get_param_min(enum dss_range_param param)
{
return omap_current_dss_features->dss_params[param].min;
}
unsigned long dss_feat_get_param_max(enum dss_range_param param)
{
return omap_current_dss_features->dss_params[param].max;
}
enum omap_display_type dss_feat_get_supported_displays(enum omap_channel channel)
{
return omap_current_dss_features->supported_displays[channel];
}
EXPORT_SYMBOL(dss_feat_get_supported_displays);
enum omap_dss_output_id dss_feat_get_supported_outputs(enum omap_channel channel)
{
return omap_current_dss_features->supported_outputs[channel];
}
EXPORT_SYMBOL(dss_feat_get_supported_outputs);
enum omap_color_mode dss_feat_get_supported_color_modes(enum omap_plane plane)
{
return omap_current_dss_features->supported_color_modes[plane];
}
EXPORT_SYMBOL(dss_feat_get_supported_color_modes);
enum omap_overlay_caps dss_feat_get_overlay_caps(enum omap_plane plane)
{
return omap_current_dss_features->overlay_caps[plane];
}
bool dss_feat_color_mode_supported(enum omap_plane plane,
enum omap_color_mode color_mode)
{
return omap_current_dss_features->supported_color_modes[plane] &
color_mode;
}
const char *dss_feat_get_clk_source_name(enum omap_dss_clk_source id)
{
return omap_current_dss_features->clksrc_names[id];
}
OMAP: DSS2: Fix FIFO threshold and burst size for OMAP4 The DMA FIFO threshold registers and burst size registers have changed for OMAP4. The current code only handles OMAP2/3 case, and so the values are a bit off for OMAP4. A summary of the differences between OMAP2/3 and OMAP4: Burst size: OMAP2/3: 4 x 32 bits / 8 x 32 bits / 16 x 32 bits OMAP4: 2 x 128 bits / 4 x 128 bits / 8 x 128 bits Threshold size: OMAP2/3: in bytes (8 bit units) OMAP4: in 128bit units This patch fixes the issue by creating two new helper functions in dss_features: dss_feat_get_buffer_size_unit() and dss_feat_get_burst_size_unit(). These return (in bytes) the unit size for threshold registers and unit size for burst size register, respectively, and are used to calculate correct values. For the threshold size the usage is straightforward. However, the burst size register has different multipliers for OMAP2/3 and OMAP4. This patch solves the problem by defining the multipliers for the burst size as 2x, 4x and 8x, which fit fine for the OMAP4 burst size definition (i.e. burst size unit for OMAP4 is 128bits), but requires a slight twist on OMAP2/3 by defining the burst size unit as 64bit. As the driver in practice always uses the maximum burst size, and no use case currently exists where we would want to use a smaller burst size, this patch changes the driver to hardcode the burst size when initializing DISPC. This makes the threshold configuration code somewhat simpler. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-06-21 13:35:36 +07:00
u32 dss_feat_get_buffer_size_unit(void)
{
return omap_current_dss_features->buffer_size_unit;
}
u32 dss_feat_get_burst_size_unit(void)
{
return omap_current_dss_features->burst_size_unit;
}
/* DSS has_feature check */
bool dss_has_feature(enum dss_feat_id id)
{
int i;
const enum dss_feat_id *features = omap_current_dss_features->features;
const int num_features = omap_current_dss_features->num_features;
for (i = 0; i < num_features; i++) {
if (features[i] == id)
return true;
}
return false;
}
void dss_feat_get_reg_field(enum dss_feat_reg_field id, u8 *start, u8 *end)
{
if (id >= omap_current_dss_features->num_reg_fields)
BUG();
*start = omap_current_dss_features->reg_fields[id].start;
*end = omap_current_dss_features->reg_fields[id].end;
}
OMAPDSS: DISPC: Support rotation through TILER TILER is a block in OMAP4's DMM which lets DSS fetch frames in a rotated manner. Physical memory can be mapped to a portion of OMAP's system address space called TILER address space. The TILER address space is split into 8 views. Each view represents a rotated or mirrored form of the mapped physical memory. When a DISPC overlay's base address is programmed to one of these views, the TILER fetches the pixels according to the orientation of the view. A view is further split into 4 containers, each container holds elements of a particular size. Rotation can be achieved at the granularity of elements in the container. For more information on TILER, refer to the Memory Subsytem section in OMAP4 TRM. Rotation type TILER has been added which is used to exploit the capabilities of these 8 views for performing various rotations. When fetching from addresses mapped to TILER space, the DISPC DMA can fetch pixels in either 1D or 2D bursts. The fetch depends on which TILER container we are accessing. Accessing 8, 16 and 32 bit sized containers requires 2D bursts, and page mode sized containers require 1D bursts. The DSS2 user is expected to provide the Tiler address of the view that it is interested in. This is passed to the paddr and p_uv_addr parameters in omap_overlay_info. It is also expected to provide the stride value based on the view's orientation and container type, this should be passed to the screen_width parameter of omap_overlay_info. In calc_tiler_rotation_offset screen_width is used to calculate the required row_inc for DISPC. x_predecim and y_predecim are also used to calculate row_inc and pix_inc thereby adding predecimation support for TILER. Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-05-11 20:49:55 +07:00
bool dss_feat_rotation_type_supported(enum omap_dss_rotation_type rot_type)
{
return omap_current_dss_features->supported_rotation_types & rot_type;
}
void dss_features_init(enum omapdss_version version)
{
switch (version) {
case OMAPDSS_VER_OMAP24xx:
omap_current_dss_features = &omap2_dss_features;
break;
case OMAPDSS_VER_OMAP34xx_ES1:
case OMAPDSS_VER_OMAP34xx_ES3:
omap_current_dss_features = &omap3430_dss_features;
break;
case OMAPDSS_VER_OMAP3630:
omap_current_dss_features = &omap3630_dss_features;
break;
case OMAPDSS_VER_OMAP4430_ES1:
omap_current_dss_features = &omap4430_es1_0_dss_features;
break;
case OMAPDSS_VER_OMAP4430_ES2:
omap_current_dss_features = &omap4430_es2_0_1_2_dss_features;
break;
case OMAPDSS_VER_OMAP4:
omap_current_dss_features = &omap4_dss_features;
break;
case OMAPDSS_VER_OMAP5:
omap_current_dss_features = &omap5_dss_features;
break;
case OMAPDSS_VER_AM35xx:
omap_current_dss_features = &am35xx_dss_features;
break;
default:
DSSWARN("Unsupported OMAP version");
break;
}
}