AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-27 05:30:56 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
805b3e4235
linux_dsm_epyc7002/arch/arm/mach-omap2/cm3xxx.c

666 lines
21 KiB
C
Raw Normal View History

OMAP2/3/4 PRCM: add module IDLEST wait code After a hardware module's clocks are enabled, Linux must wait for it to indicate readiness via its IDLEST bit before attempting to access the device, otherwise register accesses to the device may trigger an abort. This has traditionally been implemented in the clock framework, but this is the wrong place for it: the clock framework doesn't know which module clocks must be enabled for a module to leave idle; and if a module is not in smart-idle mode, it may never leave idle at all. This type of information is best stored in a per-hardware module data structure (coming in a following patch), rather than a per-clock data structure. The new code will use these new functions to handle waiting for modules to enable. Once hardware module data is filled in for all of the on-chip devices, the clock framework code to handle IDLEST waiting can be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-09-04 00:14:02 +07:00
/*
ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions into PRM/CM Move the low-level SoC-specific clockdomain control functions into cm*.c and prm*.c. For example, OMAP2xxx low-level clockdomain functions go into cm2xxx.c. Then remove the unnecessary clockdomain*xxx*.c files. The objective is to centralize low-level CM and PRM register accesses into the cm*.[ch] and prm*.[ch] files, and then to export an OMAP SoC-independent API to higher-level OMAP power management code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 14:01:11 +07:00
* OMAP3xxx CM module functions
OMAP2/3/4 PRCM: add module IDLEST wait code After a hardware module's clocks are enabled, Linux must wait for it to indicate readiness via its IDLEST bit before attempting to access the device, otherwise register accesses to the device may trigger an abort. This has traditionally been implemented in the clock framework, but this is the wrong place for it: the clock framework doesn't know which module clocks must be enabled for a module to leave idle; and if a module is not in smart-idle mode, it may never leave idle at all. This type of information is best stored in a per-hardware module data structure (coming in a following patch), rather than a per-clock data structure. The new code will use these new functions to handle waiting for modules to enable. Once hardware module data is filled in for all of the on-chip devices, the clock framework code to handle IDLEST waiting can be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-09-04 00:14:02 +07:00
*
* Copyright (C) 2009 Nokia Corporation
ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions into PRM/CM Move the low-level SoC-specific clockdomain control functions into cm*.c and prm*.c. For example, OMAP2xxx low-level clockdomain functions go into cm2xxx.c. Then remove the unnecessary clockdomain*xxx*.c files. The objective is to centralize low-level CM and PRM register accesses into the cm*.[ch] and prm*.[ch] files, and then to export an OMAP SoC-independent API to higher-level OMAP power management code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 14:01:11 +07:00
* Copyright (C) 2008-2010, 2012 Texas Instruments, Inc.
OMAP2/3/4 PRCM: add module IDLEST wait code After a hardware module's clocks are enabled, Linux must wait for it to indicate readiness via its IDLEST bit before attempting to access the device, otherwise register accesses to the device may trigger an abort. This has traditionally been implemented in the clock framework, but this is the wrong place for it: the clock framework doesn't know which module clocks must be enabled for a module to leave idle; and if a module is not in smart-idle mode, it may never leave idle at all. This type of information is best stored in a per-hardware module data structure (coming in a following patch), rather than a per-clock data structure. The new code will use these new functions to handle waiting for modules to enable. Once hardware module data is filled in for all of the on-chip devices, the clock framework code to handle IDLEST waiting can be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-09-04 00:14:02 +07:00
* Paul Walmsley
ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions into PRM/CM Move the low-level SoC-specific clockdomain control functions into cm*.c and prm*.c. For example, OMAP2xxx low-level clockdomain functions go into cm2xxx.c. Then remove the unnecessary clockdomain*xxx*.c files. The objective is to centralize low-level CM and PRM register accesses into the cm*.[ch] and prm*.[ch] files, and then to export an OMAP SoC-independent API to higher-level OMAP power management code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 14:01:11 +07:00
* Rajendra Nayak <rnayak@ti.com>
OMAP2/3/4 PRCM: add module IDLEST wait code After a hardware module's clocks are enabled, Linux must wait for it to indicate readiness via its IDLEST bit before attempting to access the device, otherwise register accesses to the device may trigger an abort. This has traditionally been implemented in the clock framework, but this is the wrong place for it: the clock framework doesn't know which module clocks must be enabled for a module to leave idle; and if a module is not in smart-idle mode, it may never leave idle at all. This type of information is best stored in a per-hardware module data structure (coming in a following patch), rather than a per-clock data structure. The new code will use these new functions to handle waiting for modules to enable. Once hardware module data is filled in for all of the on-chip devices, the clock framework code to handle IDLEST waiting can be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-09-04 00:14:02 +07:00
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+ As the plat and mach includes need to disappear for single zImage work, we need to remove plat/hardware.h. Do this by splitting plat/hardware.h into omap1 and omap2+ specific files. The old plat/hardware.h already has omap1 only defines, so it gets moved to mach/hardware.h for omap1. For omap2+, we use the local soc.h that for now just includes the related SoC headers to keep this patch more readable. Note that the local soc.h still includes plat/cpu.h that can be dealt with in later patches. Let's also include plat/serial.h from common.h for all the board-*.c files. This allows making the include files local later on without patching these files again. Note that only minimal changes are done in this patch for the drivers/watchdog/omap_wdt.c driver to keep things compiling. Further patches are needed to eventually remove cpu_is_omap usage in the drivers. Also only minimal changes are done to sound/soc/omap/* to remove the unneeded includes and to define OMAP44XX_MCPDM_L3_BASE locally so there's no need to include omap44xx.h. While at it, also sort some of the includes in the standard way. Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-01 00:59:07 +07:00
#include "soc.h"
ARM: OMAP2+: Move most of plat/io.h into local iomap.h There's no need to have these defines in plat/io.h. Note that we now need to ifdef omap_read/write calls as they will be available for omap1 only. While at it, clean up the includes to group them like they typically are grouped. Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-02-25 01:34:35 +07:00
#include "iomap.h"
ARM: 7159/1: OMAP: Introduce local common.h files As suggested by Russell King - ARM Linux <linux@arm.linux.org.uk>, there's no need to keep local prototypes in non-local headers. Add mach-omap1/common.h and mach-omap2/common.h and move the local prototypes there from plat/common.h and mach/omap4-common.h. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-11 04:45:17 +07:00
#include "common.h"
ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions into PRM/CM Move the low-level SoC-specific clockdomain control functions into cm*.c and prm*.c. For example, OMAP2xxx low-level clockdomain functions go into cm2xxx.c. Then remove the unnecessary clockdomain*xxx*.c files. The objective is to centralize low-level CM and PRM register accesses into the cm*.[ch] and prm*.[ch] files, and then to export an OMAP SoC-independent API to higher-level OMAP power management code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 14:01:11 +07:00
#include "prm2xxx_3xxx.h"
OMAP2/3/4 PRCM: add module IDLEST wait code After a hardware module's clocks are enabled, Linux must wait for it to indicate readiness via its IDLEST bit before attempting to access the device, otherwise register accesses to the device may trigger an abort. This has traditionally been implemented in the clock framework, but this is the wrong place for it: the clock framework doesn't know which module clocks must be enabled for a module to leave idle; and if a module is not in smart-idle mode, it may never leave idle at all. This type of information is best stored in a per-hardware module data structure (coming in a following patch), rather than a per-clock data structure. The new code will use these new functions to handle waiting for modules to enable. Once hardware module data is filled in for all of the on-chip devices, the clock framework code to handle IDLEST waiting can be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-09-04 00:14:02 +07:00
#include "cm.h"
ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files Move OMAP3xxx-specific CM functions & macros into cm3xxx.[ch] and OMAP2xxx-specific macros into cm2xxx.[ch]. Move basic CM register access functions into static inline functions in cm2xxx_3xxx.h, leaving only OMAP2/3 hardreset functions in cm2xxx_3xxx.c. As part of this, split the CM and hwmod code that waits for devices to become ready into SoC-specific functions. This is in preparation for the upcoming move of this code to drivers/. Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 14:01:11 +07:00
#include "cm3xxx.h"
OMAP2/3/4 PRCM: add module IDLEST wait code After a hardware module's clocks are enabled, Linux must wait for it to indicate readiness via its IDLEST bit before attempting to access the device, otherwise register accesses to the device may trigger an abort. This has traditionally been implemented in the clock framework, but this is the wrong place for it: the clock framework doesn't know which module clocks must be enabled for a module to leave idle; and if a module is not in smart-idle mode, it may never leave idle at all. This type of information is best stored in a per-hardware module data structure (coming in a following patch), rather than a per-clock data structure. The new code will use these new functions to handle waiting for modules to enable. Once hardware module data is filled in for all of the on-chip devices, the clock framework code to handle IDLEST waiting can be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-09-04 00:14:02 +07:00
#include "cm-regbits-34xx.h"
ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions into PRM/CM Move the low-level SoC-specific clockdomain control functions into cm*.c and prm*.c. For example, OMAP2xxx low-level clockdomain functions go into cm2xxx.c. Then remove the unnecessary clockdomain*xxx*.c files. The objective is to centralize low-level CM and PRM register accesses into the cm*.[ch] and prm*.[ch] files, and then to export an OMAP SoC-independent API to higher-level OMAP power management code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 14:01:11 +07:00
#include "clockdomain.h"
OMAP2/3/4 PRCM: add module IDLEST wait code After a hardware module's clocks are enabled, Linux must wait for it to indicate readiness via its IDLEST bit before attempting to access the device, otherwise register accesses to the device may trigger an abort. This has traditionally been implemented in the clock framework, but this is the wrong place for it: the clock framework doesn't know which module clocks must be enabled for a module to leave idle; and if a module is not in smart-idle mode, it may never leave idle at all. This type of information is best stored in a per-hardware module data structure (coming in a following patch), rather than a per-clock data structure. The new code will use these new functions to handle waiting for modules to enable. Once hardware module data is filled in for all of the on-chip devices, the clock framework code to handle IDLEST waiting can be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-09-04 00:14:02 +07:00
ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files Move OMAP3xxx-specific CM functions & macros into cm3xxx.[ch] and OMAP2xxx-specific macros into cm2xxx.[ch]. Move basic CM register access functions into static inline functions in cm2xxx_3xxx.h, leaving only OMAP2/3 hardreset functions in cm2xxx_3xxx.c. As part of this, split the CM and hwmod code that waits for devices to become ready into SoC-specific functions. This is in preparation for the upcoming move of this code to drivers/. Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 14:01:11 +07:00
static const u8 omap3xxx_cm_idlest_offs[] = {
CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3
OMAP2/3/4 PRCM: add module IDLEST wait code After a hardware module's clocks are enabled, Linux must wait for it to indicate readiness via its IDLEST bit before attempting to access the device, otherwise register accesses to the device may trigger an abort. This has traditionally been implemented in the clock framework, but this is the wrong place for it: the clock framework doesn't know which module clocks must be enabled for a module to leave idle; and if a module is not in smart-idle mode, it may never leave idle at all. This type of information is best stored in a per-hardware module data structure (coming in a following patch), rather than a per-clock data structure. The new code will use these new functions to handle waiting for modules to enable. Once hardware module data is filled in for all of the on-chip devices, the clock framework code to handle IDLEST waiting can be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-09-04 00:14:02 +07:00
};
OMAP2/3: clockdomain: remove unneeded .clkstctrl_reg, remove some direct CM register accesses Reverse some of the effects of commit 84c0c39aec31a09571fc08a752a2f4da0fe9fcf2 ("ARM: OMAP4: PM: Make OMAP3 Clock-domain framework compatible for OMAP4"). On OMAP2/3, the CM_CLKSTCTRL register is at a constant offset from the powerdomain's CM instance. Also, remove some of the direct CM register access from the clockdomain code, moving it to the OMAP2/3 CM code instead. The intention here is to simplify the clockdomain code. (The long-term goal is to move all direct CM register access across the OMAP core code to the appropriate cm*.c file.) Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-12-22 11:05:15 +07:00
/*
*
*/
static void _write_clktrctrl(u8 c, s16 module, u32 mask)
{
u32 v;
v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
v &= ~mask;
v |= c << __ffs(mask);
omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL);
}
ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files Move OMAP3xxx-specific CM functions & macros into cm3xxx.[ch] and OMAP2xxx-specific macros into cm2xxx.[ch]. Move basic CM register access functions into static inline functions in cm2xxx_3xxx.h, leaving only OMAP2/3 hardreset functions in cm2xxx_3xxx.c. As part of this, split the CM and hwmod code that waits for devices to become ready into SoC-specific functions. This is in preparation for the upcoming move of this code to drivers/. Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 14:01:11 +07:00
bool omap3xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
OMAP2/3: clockdomain: remove unneeded .clkstctrl_reg, remove some direct CM register accesses Reverse some of the effects of commit 84c0c39aec31a09571fc08a752a2f4da0fe9fcf2 ("ARM: OMAP4: PM: Make OMAP3 Clock-domain framework compatible for OMAP4"). On OMAP2/3, the CM_CLKSTCTRL register is at a constant offset from the powerdomain's CM instance. Also, remove some of the direct CM register access from the clockdomain code, moving it to the OMAP2/3 CM code instead. The intention here is to simplify the clockdomain code. (The long-term goal is to move all direct CM register access across the OMAP core code to the appropriate cm*.c file.) Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-12-22 11:05:15 +07:00
{
u32 v;
v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
v &= mask;
v >>= __ffs(mask);
ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files Move OMAP3xxx-specific CM functions & macros into cm3xxx.[ch] and OMAP2xxx-specific macros into cm2xxx.[ch]. Move basic CM register access functions into static inline functions in cm2xxx_3xxx.h, leaving only OMAP2/3 hardreset functions in cm2xxx_3xxx.c. As part of this, split the CM and hwmod code that waits for devices to become ready into SoC-specific functions. This is in preparation for the upcoming move of this code to drivers/. Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 14:01:11 +07:00
return (v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
OMAP2/3: clockdomain: remove unneeded .clkstctrl_reg, remove some direct CM register accesses Reverse some of the effects of commit 84c0c39aec31a09571fc08a752a2f4da0fe9fcf2 ("ARM: OMAP4: PM: Make OMAP3 Clock-domain framework compatible for OMAP4"). On OMAP2/3, the CM_CLKSTCTRL register is at a constant offset from the powerdomain's CM instance. Also, remove some of the direct CM register access from the clockdomain code, moving it to the OMAP2/3 CM code instead. The intention here is to simplify the clockdomain code. (The long-term goal is to move all direct CM register access across the OMAP core code to the appropriate cm*.c file.) Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-12-22 11:05:15 +07:00
}
void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
{
_write_clktrctrl(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, module, mask);
}
void omap3xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
{
_write_clktrctrl(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, module, mask);
}
void omap3xxx_cm_clkdm_force_sleep(s16 module, u32 mask)
{
_write_clktrctrl(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, module, mask);
}
void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask)
{
_write_clktrctrl(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, module, mask);
}
/*
*
*/
OMAP2/3/4 PRCM: add module IDLEST wait code After a hardware module's clocks are enabled, Linux must wait for it to indicate readiness via its IDLEST bit before attempting to access the device, otherwise register accesses to the device may trigger an abort. This has traditionally been implemented in the clock framework, but this is the wrong place for it: the clock framework doesn't know which module clocks must be enabled for a module to leave idle; and if a module is not in smart-idle mode, it may never leave idle at all. This type of information is best stored in a per-hardware module data structure (coming in a following patch), rather than a per-clock data structure. The new code will use these new functions to handle waiting for modules to enable. Once hardware module data is filled in for all of the on-chip devices, the clock framework code to handle IDLEST waiting can be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-09-04 00:14:02 +07:00
/**
ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files Move OMAP3xxx-specific CM functions & macros into cm3xxx.[ch] and OMAP2xxx-specific macros into cm2xxx.[ch]. Move basic CM register access functions into static inline functions in cm2xxx_3xxx.h, leaving only OMAP2/3 hardreset functions in cm2xxx_3xxx.c. As part of this, split the CM and hwmod code that waits for devices to become ready into SoC-specific functions. This is in preparation for the upcoming move of this code to drivers/. Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 14:01:11 +07:00
* omap3xxx_cm_wait_module_ready - wait for a module to leave idle or standby
OMAP2/3/4 PRCM: add module IDLEST wait code After a hardware module's clocks are enabled, Linux must wait for it to indicate readiness via its IDLEST bit before attempting to access the device, otherwise register accesses to the device may trigger an abort. This has traditionally been implemented in the clock framework, but this is the wrong place for it: the clock framework doesn't know which module clocks must be enabled for a module to leave idle; and if a module is not in smart-idle mode, it may never leave idle at all. This type of information is best stored in a per-hardware module data structure (coming in a following patch), rather than a per-clock data structure. The new code will use these new functions to handle waiting for modules to enable. Once hardware module data is filled in for all of the on-chip devices, the clock framework code to handle IDLEST waiting can be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-09-04 00:14:02 +07:00
* @prcm_mod: PRCM module offset
* @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
* @idlest_shift: shift of the bit in the CM_IDLEST* register to check
*
ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files Move OMAP3xxx-specific CM functions & macros into cm3xxx.[ch] and OMAP2xxx-specific macros into cm2xxx.[ch]. Move basic CM register access functions into static inline functions in cm2xxx_3xxx.h, leaving only OMAP2/3 hardreset functions in cm2xxx_3xxx.c. As part of this, split the CM and hwmod code that waits for devices to become ready into SoC-specific functions. This is in preparation for the upcoming move of this code to drivers/. Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 14:01:11 +07:00
* Wait for the PRCM to indicate that the module identified by
* (@prcm_mod, @idlest_id, @idlest_shift) is clocked. Return 0 upon
* success or -EBUSY if the module doesn't enable in time.
OMAP2/3/4 PRCM: add module IDLEST wait code After a hardware module's clocks are enabled, Linux must wait for it to indicate readiness via its IDLEST bit before attempting to access the device, otherwise register accesses to the device may trigger an abort. This has traditionally been implemented in the clock framework, but this is the wrong place for it: the clock framework doesn't know which module clocks must be enabled for a module to leave idle; and if a module is not in smart-idle mode, it may never leave idle at all. This type of information is best stored in a per-hardware module data structure (coming in a following patch), rather than a per-clock data structure. The new code will use these new functions to handle waiting for modules to enable. Once hardware module data is filled in for all of the on-chip devices, the clock framework code to handle IDLEST waiting can be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-09-04 00:14:02 +07:00
*/
ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files Move OMAP3xxx-specific CM functions & macros into cm3xxx.[ch] and OMAP2xxx-specific macros into cm2xxx.[ch]. Move basic CM register access functions into static inline functions in cm2xxx_3xxx.h, leaving only OMAP2/3 hardreset functions in cm2xxx_3xxx.c. As part of this, split the CM and hwmod code that waits for devices to become ready into SoC-specific functions. This is in preparation for the upcoming move of this code to drivers/. Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 14:01:11 +07:00
int omap3xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
OMAP2/3/4 PRCM: add module IDLEST wait code After a hardware module's clocks are enabled, Linux must wait for it to indicate readiness via its IDLEST bit before attempting to access the device, otherwise register accesses to the device may trigger an abort. This has traditionally been implemented in the clock framework, but this is the wrong place for it: the clock framework doesn't know which module clocks must be enabled for a module to leave idle; and if a module is not in smart-idle mode, it may never leave idle at all. This type of information is best stored in a per-hardware module data structure (coming in a following patch), rather than a per-clock data structure. The new code will use these new functions to handle waiting for modules to enable. Once hardware module data is filled in for all of the on-chip devices, the clock framework code to handle IDLEST waiting can be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-09-04 00:14:02 +07:00
{
int ena = 0, i = 0;
u8 cm_idlest_reg;
u32 mask;
ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files Move OMAP3xxx-specific CM functions & macros into cm3xxx.[ch] and OMAP2xxx-specific macros into cm2xxx.[ch]. Move basic CM register access functions into static inline functions in cm2xxx_3xxx.h, leaving only OMAP2/3 hardreset functions in cm2xxx_3xxx.c. As part of this, split the CM and hwmod code that waits for devices to become ready into SoC-specific functions. This is in preparation for the upcoming move of this code to drivers/. Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 14:01:11 +07:00
if (!idlest_id || (idlest_id > ARRAY_SIZE(omap3xxx_cm_idlest_offs)))
OMAP2/3/4 PRCM: add module IDLEST wait code After a hardware module's clocks are enabled, Linux must wait for it to indicate readiness via its IDLEST bit before attempting to access the device, otherwise register accesses to the device may trigger an abort. This has traditionally been implemented in the clock framework, but this is the wrong place for it: the clock framework doesn't know which module clocks must be enabled for a module to leave idle; and if a module is not in smart-idle mode, it may never leave idle at all. This type of information is best stored in a per-hardware module data structure (coming in a following patch), rather than a per-clock data structure. The new code will use these new functions to handle waiting for modules to enable. Once hardware module data is filled in for all of the on-chip devices, the clock framework code to handle IDLEST waiting can be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-09-04 00:14:02 +07:00
return -EINVAL;
ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files Move OMAP3xxx-specific CM functions & macros into cm3xxx.[ch] and OMAP2xxx-specific macros into cm2xxx.[ch]. Move basic CM register access functions into static inline functions in cm2xxx_3xxx.h, leaving only OMAP2/3 hardreset functions in cm2xxx_3xxx.c. As part of this, split the CM and hwmod code that waits for devices to become ready into SoC-specific functions. This is in preparation for the upcoming move of this code to drivers/. Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 14:01:11 +07:00
cm_idlest_reg = omap3xxx_cm_idlest_offs[idlest_id - 1];
OMAP2/3/4 PRCM: add module IDLEST wait code After a hardware module's clocks are enabled, Linux must wait for it to indicate readiness via its IDLEST bit before attempting to access the device, otherwise register accesses to the device may trigger an abort. This has traditionally been implemented in the clock framework, but this is the wrong place for it: the clock framework doesn't know which module clocks must be enabled for a module to leave idle; and if a module is not in smart-idle mode, it may never leave idle at all. This type of information is best stored in a per-hardware module data structure (coming in a following patch), rather than a per-clock data structure. The new code will use these new functions to handle waiting for modules to enable. Once hardware module data is filled in for all of the on-chip devices, the clock framework code to handle IDLEST waiting can be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-09-04 00:14:02 +07:00
OMAP24xx: CM: fix mask used for checking IDLEST status On OMAP24xx, the polarity for the IDLEST bits is opposite of OMAP3. The mask used to check this was using the bit position instead of the bit mask. This patch fixes the problem by using the bit mask instead of the bit field. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-07-27 05:34:28 +07:00
mask = 1 << idlest_shift;
ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files Move OMAP3xxx-specific CM functions & macros into cm3xxx.[ch] and OMAP2xxx-specific macros into cm2xxx.[ch]. Move basic CM register access functions into static inline functions in cm2xxx_3xxx.h, leaving only OMAP2/3 hardreset functions in cm2xxx_3xxx.c. As part of this, split the CM and hwmod code that waits for devices to become ready into SoC-specific functions. This is in preparation for the upcoming move of this code to drivers/. Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 14:01:11 +07:00
ena = 0;
OMAP24xx: CM: fix mask used for checking IDLEST status On OMAP24xx, the polarity for the IDLEST bits is opposite of OMAP3. The mask used to check this was using the bit position instead of the bit mask. This patch fixes the problem by using the bit mask instead of the bit field. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-07-27 05:34:28 +07:00
ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files Move OMAP3xxx-specific CM functions & macros into cm3xxx.[ch] and OMAP2xxx-specific macros into cm2xxx.[ch]. Move basic CM register access functions into static inline functions in cm2xxx_3xxx.h, leaving only OMAP2/3 hardreset functions in cm2xxx_3xxx.c. As part of this, split the CM and hwmod code that waits for devices to become ready into SoC-specific functions. This is in preparation for the upcoming move of this code to drivers/. Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 14:01:11 +07:00
omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) &
mask) == ena), MAX_MODULE_READY_TIME, i);
OMAP2/3/4 PRCM: add module IDLEST wait code After a hardware module's clocks are enabled, Linux must wait for it to indicate readiness via its IDLEST bit before attempting to access the device, otherwise register accesses to the device may trigger an abort. This has traditionally been implemented in the clock framework, but this is the wrong place for it: the clock framework doesn't know which module clocks must be enabled for a module to leave idle; and if a module is not in smart-idle mode, it may never leave idle at all. This type of information is best stored in a per-hardware module data structure (coming in a following patch), rather than a per-clock data structure. The new code will use these new functions to handle waiting for modules to enable. Once hardware module data is filled in for all of the on-chip devices, the clock framework code to handle IDLEST waiting can be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-09-04 00:14:02 +07:00
return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
}
ARM: OMAP2+: CM/clock: convert _omap2_module_wait_ready() to use SoC-independent CM functions Convert the OMAP clock code's _omap2_module_wait_ready() to use SoC-independent CM functions that are provided by the CM code, rather than using a deprecated function from mach-omap2/prcm.c. This facilitates the future conversion of the CM code to a driver, and also removes a mach-omap2/prcm.c user. mach-omap2/prcm.c will be removed by a subsequent patch. Some modules have IDLEST registers that aren't in the CM module, such as the AM3517 IDLEST bits. So we also need a fallback function for these non-CM odd cases. Create a temporary one in mach-omap2/clock.c, intended to exist until the SCM drivers are ready. Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
2012-10-30 09:56:29 +07:00
/**
* omap3xxx_cm_split_idlest_reg - split CM_IDLEST reg addr into its components
* @idlest_reg: CM_IDLEST* virtual address
* @prcm_inst: pointer to an s16 to return the PRCM instance offset
* @idlest_reg_id: pointer to a u8 to return the CM_IDLESTx register ID
*
* XXX This function is only needed until absolute register addresses are
* removed from the OMAP struct clk records.
*/
int omap3xxx_cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst,
u8 *idlest_reg_id)
{
unsigned long offs;
u8 idlest_offs;
int i;
if (idlest_reg < (cm_base + OMAP3430_IVA2_MOD) ||
idlest_reg > (cm_base + 0x1ffff))
return -EINVAL;
idlest_offs = (unsigned long)idlest_reg & 0xff;
for (i = 0; i < ARRAY_SIZE(omap3xxx_cm_idlest_offs); i++) {
if (idlest_offs == omap3xxx_cm_idlest_offs[i]) {
*idlest_reg_id = i + 1;
break;
}
}
if (i == ARRAY_SIZE(omap3xxx_cm_idlest_offs))
return -EINVAL;
offs = idlest_reg - cm_base;
offs &= 0xff00;
*prcm_inst = offs;
return 0;
}
ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions into PRM/CM Move the low-level SoC-specific clockdomain control functions into cm*.c and prm*.c. For example, OMAP2xxx low-level clockdomain functions go into cm2xxx.c. Then remove the unnecessary clockdomain*xxx*.c files. The objective is to centralize low-level CM and PRM register accesses into the cm*.[ch] and prm*.[ch] files, and then to export an OMAP SoC-independent API to higher-level OMAP power management code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 14:01:11 +07:00
/* Clockdomain low-level operations */
static int omap3xxx_clkdm_add_sleepdep(struct clockdomain *clkdm1,
struct clockdomain *clkdm2)
{
omap2_cm_set_mod_reg_bits((1 << clkdm2->dep_bit),
clkdm1->pwrdm.ptr->prcm_offs,
OMAP3430_CM_SLEEPDEP);
return 0;
}
static int omap3xxx_clkdm_del_sleepdep(struct clockdomain *clkdm1,
struct clockdomain *clkdm2)
{
omap2_cm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
clkdm1->pwrdm.ptr->prcm_offs,
OMAP3430_CM_SLEEPDEP);
return 0;
}
static int omap3xxx_clkdm_read_sleepdep(struct clockdomain *clkdm1,
struct clockdomain *clkdm2)
{
return omap2_cm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs,
OMAP3430_CM_SLEEPDEP,
(1 << clkdm2->dep_bit));
}
static int omap3xxx_clkdm_clear_all_sleepdeps(struct clockdomain *clkdm)
{
struct clkdm_dep *cd;
u32 mask = 0;
for (cd = clkdm->sleepdep_srcs; cd && cd->clkdm_name; cd++) {
if (!cd->clkdm)
continue; /* only happens if data is erroneous */
mask |= 1 << cd->clkdm->dep_bit;
ARM: OMAP2+: clockdomain: convert existing atomic usecounts into spinlock-protected shorts/ints The atomic usecounts seem to be confusing, and are no longer needed since the operations that they are attached to really should take place under lock. Replace the atomic counters with simple integers, protected by the enclosing powerdomain spinlock. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2013-01-26 14:58:17 +07:00
cd->sleepdep_usecount = 0;
ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions into PRM/CM Move the low-level SoC-specific clockdomain control functions into cm*.c and prm*.c. For example, OMAP2xxx low-level clockdomain functions go into cm2xxx.c. Then remove the unnecessary clockdomain*xxx*.c files. The objective is to centralize low-level CM and PRM register accesses into the cm*.[ch] and prm*.[ch] files, and then to export an OMAP SoC-independent API to higher-level OMAP power management code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 14:01:11 +07:00
}
omap2_cm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs,
OMAP3430_CM_SLEEPDEP);
return 0;
}
static int omap3xxx_clkdm_sleep(struct clockdomain *clkdm)
{
omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
return 0;
}
static int omap3xxx_clkdm_wakeup(struct clockdomain *clkdm)
{
omap3xxx_cm_clkdm_force_wakeup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
return 0;
}
static void omap3xxx_clkdm_allow_idle(struct clockdomain *clkdm)
{
ARM: OMAP2+: clockdomain: convert existing atomic usecounts into spinlock-protected shorts/ints The atomic usecounts seem to be confusing, and are no longer needed since the operations that they are attached to really should take place under lock. Replace the atomic counters with simple integers, protected by the enclosing powerdomain spinlock. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2013-01-26 14:58:17 +07:00
if (clkdm->usecount > 0)
ARM: OMAP2+: clockdomain: work on wkdep/sleepdep functions Split the clkdm_(add|del)_(wk|sleep)dep() functions into lockless and locking versions -- this will be needed in a subsequent patch. Also, while here, remove the leading underscore, since these are not currently static functions. And for functions that have kerneldoc-style comment blocks, but which are missing the initial '/**' tag, fix the tag to indicate that they are kerneldoc. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-01-26 14:58:17 +07:00
clkdm_add_autodeps(clkdm);
ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions into PRM/CM Move the low-level SoC-specific clockdomain control functions into cm*.c and prm*.c. For example, OMAP2xxx low-level clockdomain functions go into cm2xxx.c. Then remove the unnecessary clockdomain*xxx*.c files. The objective is to centralize low-level CM and PRM register accesses into the cm*.[ch] and prm*.[ch] files, and then to export an OMAP SoC-independent API to higher-level OMAP power management code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 14:01:11 +07:00
omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
}
static void omap3xxx_clkdm_deny_idle(struct clockdomain *clkdm)
{
omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
ARM: OMAP2+: clockdomain: convert existing atomic usecounts into spinlock-protected shorts/ints The atomic usecounts seem to be confusing, and are no longer needed since the operations that they are attached to really should take place under lock. Replace the atomic counters with simple integers, protected by the enclosing powerdomain spinlock. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2013-01-26 14:58:17 +07:00
if (clkdm->usecount > 0)
ARM: OMAP2+: clockdomain: work on wkdep/sleepdep functions Split the clkdm_(add|del)_(wk|sleep)dep() functions into lockless and locking versions -- this will be needed in a subsequent patch. Also, while here, remove the leading underscore, since these are not currently static functions. And for functions that have kerneldoc-style comment blocks, but which are missing the initial '/**' tag, fix the tag to indicate that they are kerneldoc. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-01-26 14:58:17 +07:00
clkdm_del_autodeps(clkdm);
ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions into PRM/CM Move the low-level SoC-specific clockdomain control functions into cm*.c and prm*.c. For example, OMAP2xxx low-level clockdomain functions go into cm2xxx.c. Then remove the unnecessary clockdomain*xxx*.c files. The objective is to centralize low-level CM and PRM register accesses into the cm*.[ch] and prm*.[ch] files, and then to export an OMAP SoC-independent API to higher-level OMAP power management code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 14:01:11 +07:00
}
static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm)
{
bool hwsup = false;
if (!clkdm->clktrctrl_mask)
return 0;
/*
* The CLKDM_MISSING_IDLE_REPORTING flag documentation has
* more details on the unpleasant problem this is working
* around
*/
if ((clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) &&
(clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) {
omap3xxx_clkdm_wakeup(clkdm);
return 0;
}
hwsup = omap3xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
if (hwsup) {
/* Disable HW transitions when we are changing deps */
omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
ARM: OMAP2+: clockdomain: work on wkdep/sleepdep functions Split the clkdm_(add|del)_(wk|sleep)dep() functions into lockless and locking versions -- this will be needed in a subsequent patch. Also, while here, remove the leading underscore, since these are not currently static functions. And for functions that have kerneldoc-style comment blocks, but which are missing the initial '/**' tag, fix the tag to indicate that they are kerneldoc. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-01-26 14:58:17 +07:00
clkdm_add_autodeps(clkdm);
ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions into PRM/CM Move the low-level SoC-specific clockdomain control functions into cm*.c and prm*.c. For example, OMAP2xxx low-level clockdomain functions go into cm2xxx.c. Then remove the unnecessary clockdomain*xxx*.c files. The objective is to centralize low-level CM and PRM register accesses into the cm*.[ch] and prm*.[ch] files, and then to export an OMAP SoC-independent API to higher-level OMAP power management code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 14:01:11 +07:00
omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
} else {
if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
omap3xxx_clkdm_wakeup(clkdm);
}
return 0;
}
static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm)
{
bool hwsup = false;
if (!clkdm->clktrctrl_mask)
return 0;
/*
* The CLKDM_MISSING_IDLE_REPORTING flag documentation has
* more details on the unpleasant problem this is working
* around
*/
if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
!(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
return 0;
}
hwsup = omap3xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
if (hwsup) {
/* Disable HW transitions when we are changing deps */
omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
ARM: OMAP2+: clockdomain: work on wkdep/sleepdep functions Split the clkdm_(add|del)_(wk|sleep)dep() functions into lockless and locking versions -- this will be needed in a subsequent patch. Also, while here, remove the leading underscore, since these are not currently static functions. And for functions that have kerneldoc-style comment blocks, but which are missing the initial '/**' tag, fix the tag to indicate that they are kerneldoc. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-01-26 14:58:17 +07:00
clkdm_del_autodeps(clkdm);
ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions into PRM/CM Move the low-level SoC-specific clockdomain control functions into cm*.c and prm*.c. For example, OMAP2xxx low-level clockdomain functions go into cm2xxx.c. Then remove the unnecessary clockdomain*xxx*.c files. The objective is to centralize low-level CM and PRM register accesses into the cm*.[ch] and prm*.[ch] files, and then to export an OMAP SoC-independent API to higher-level OMAP power management code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-10-21 14:01:11 +07:00
omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
clkdm->clktrctrl_mask);
} else {
if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
omap3xxx_clkdm_sleep(clkdm);
}
return 0;
}
struct clkdm_ops omap3_clkdm_operations = {
.clkdm_add_wkdep = omap2_clkdm_add_wkdep,
.clkdm_del_wkdep = omap2_clkdm_del_wkdep,
.clkdm_read_wkdep = omap2_clkdm_read_wkdep,
.clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps,
.clkdm_add_sleepdep = omap3xxx_clkdm_add_sleepdep,
.clkdm_del_sleepdep = omap3xxx_clkdm_del_sleepdep,
.clkdm_read_sleepdep = omap3xxx_clkdm_read_sleepdep,
.clkdm_clear_all_sleepdeps = omap3xxx_clkdm_clear_all_sleepdeps,
.clkdm_sleep = omap3xxx_clkdm_sleep,
.clkdm_wakeup = omap3xxx_clkdm_wakeup,
.clkdm_allow_idle = omap3xxx_clkdm_allow_idle,
.clkdm_deny_idle = omap3xxx_clkdm_deny_idle,
.clkdm_clk_enable = omap3xxx_clkdm_clk_enable,
.clkdm_clk_disable = omap3xxx_clkdm_clk_disable,
};
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
/*
* Context save/restore code - OMAP3 only
*/
struct omap3_cm_regs {
u32 iva2_cm_clksel1;
u32 iva2_cm_clksel2;
u32 cm_sysconfig;
u32 sgx_cm_clksel;
u32 dss_cm_clksel;
u32 cam_cm_clksel;
u32 per_cm_clksel;
u32 emu_cm_clksel;
u32 emu_cm_clkstctrl;
OMAP3: PM: Do not rely on ROM code to restore CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL As per OMAP3 erratum (i671), ROM code adds extra latencies while restoring CM_AUTOIDLE_PLL register, if AUTO_PERIPH_DPLL is equal to 1. This patch stores 0's in scratchpad content area corresponding to AUTO_PERIPH_DPLL, to prevent ROM code to try to lock per DPLL, since it won't respect proper programing scheme. This register is then stored in prcm context. The saving and restore is now done by kernel side. Here follow the erratum description DESCRIPTION After OFF mode transition, among many restorations, the ROM Code restores the CM_AUTOIDLE_PLL register, and after that, it tries to relock the PER DPLL. In case the restoration data stored in scratchpad memory contains a field CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL = 1, then the way the ROM Code restores and locks the PER DPLL does not respect the PER DPLL programming scheme. In that case, the DPLL might not lock. Meanwhile, when trying to lock the PER DPLL, the ROM Code does not hang. Only extra latencies are introduced at wake-up. WORKAROUND When saving the context-restore structure in scratchpad memory, in order to respect the PER DPLL programming scheme, it is advised to store 0 in the CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL field of the saved structure. After wake-up, the application should store in CM_AUTOIDLE_PLL register the right desired value. Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-04-13 22:21:07 +07:00
u32 pll_cm_autoidle;
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
u32 pll_cm_autoidle2;
u32 pll_cm_clksel4;
u32 pll_cm_clksel5;
u32 pll_cm_clken2;
u32 cm_polctrl;
u32 iva2_cm_fclken;
u32 iva2_cm_clken_pll;
u32 core_cm_fclken1;
u32 core_cm_fclken3;
u32 sgx_cm_fclken;
u32 wkup_cm_fclken;
u32 dss_cm_fclken;
u32 cam_cm_fclken;
u32 per_cm_fclken;
u32 usbhost_cm_fclken;
u32 core_cm_iclken1;
u32 core_cm_iclken2;
u32 core_cm_iclken3;
u32 sgx_cm_iclken;
u32 wkup_cm_iclken;
u32 dss_cm_iclken;
u32 cam_cm_iclken;
u32 per_cm_iclken;
u32 usbhost_cm_iclken;
u32 iva2_cm_autoidle2;
u32 mpu_cm_autoidle2;
u32 iva2_cm_clkstctrl;
u32 mpu_cm_clkstctrl;
u32 core_cm_clkstctrl;
u32 sgx_cm_clkstctrl;
u32 dss_cm_clkstctrl;
u32 cam_cm_clkstctrl;
u32 per_cm_clkstctrl;
u32 neon_cm_clkstctrl;
u32 usbhost_cm_clkstctrl;
u32 core_cm_autoidle1;
u32 core_cm_autoidle2;
u32 core_cm_autoidle3;
u32 wkup_cm_autoidle;
u32 dss_cm_autoidle;
u32 cam_cm_autoidle;
u32 per_cm_autoidle;
u32 usbhost_cm_autoidle;
u32 sgx_cm_sleepdep;
u32 dss_cm_sleepdep;
u32 cam_cm_sleepdep;
u32 per_cm_sleepdep;
u32 usbhost_cm_sleepdep;
u32 cm_clkout_ctrl;
};
static struct omap3_cm_regs cm_context;
void omap3_cm_save_context(void)
{
cm_context.iva2_cm_clksel1 =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSEL1);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.iva2_cm_clksel2 =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSEL2);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.cm_sysconfig = __raw_readl(OMAP3430_CM_SYSCONFIG);
cm_context.sgx_cm_clksel =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_CLKSEL);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.dss_cm_clksel =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430_DSS_MOD, CM_CLKSEL);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.cam_cm_clksel =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430_CAM_MOD, CM_CLKSEL);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.per_cm_clksel =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_CLKSEL);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.emu_cm_clksel =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430_EMU_MOD, CM_CLKSEL1);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.emu_cm_clkstctrl =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430_EMU_MOD, OMAP2_CM_CLKSTCTRL);
OMAP3: PM: Do not rely on ROM code to restore CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL As per OMAP3 erratum (i671), ROM code adds extra latencies while restoring CM_AUTOIDLE_PLL register, if AUTO_PERIPH_DPLL is equal to 1. This patch stores 0's in scratchpad content area corresponding to AUTO_PERIPH_DPLL, to prevent ROM code to try to lock per DPLL, since it won't respect proper programing scheme. This register is then stored in prcm context. The saving and restore is now done by kernel side. Here follow the erratum description DESCRIPTION After OFF mode transition, among many restorations, the ROM Code restores the CM_AUTOIDLE_PLL register, and after that, it tries to relock the PER DPLL. In case the restoration data stored in scratchpad memory contains a field CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL = 1, then the way the ROM Code restores and locks the PER DPLL does not respect the PER DPLL programming scheme. In that case, the DPLL might not lock. Meanwhile, when trying to lock the PER DPLL, the ROM Code does not hang. Only extra latencies are introduced at wake-up. WORKAROUND When saving the context-restore structure in scratchpad memory, in order to respect the PER DPLL programming scheme, it is advised to store 0 in the CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL field of the saved structure. After wake-up, the application should store in CM_AUTOIDLE_PLL register the right desired value. Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-04-13 22:21:07 +07:00
/*
* As per erratum i671, ROM code does not respect the PER DPLL
* programming scheme if CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL == 1.
* In this case, even though this register has been saved in
* scratchpad contents, we need to restore AUTO_PERIPH_DPLL
* by ourselves. So, we need to save it anyway.
*/
cm_context.pll_cm_autoidle =
omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.pll_cm_autoidle2 =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE2);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.pll_cm_clksel4 =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL4);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.pll_cm_clksel5 =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL5);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.pll_cm_clken2 =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKEN2);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.cm_polctrl = __raw_readl(OMAP3430_CM_POLCTRL);
cm_context.iva2_cm_fclken =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_FCLKEN);
cm_context.iva2_cm_clken_pll =
omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.core_cm_fclken1 =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.core_cm_fclken3 =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.sgx_cm_fclken =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_FCLKEN);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.wkup_cm_fclken =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(WKUP_MOD, CM_FCLKEN);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.dss_cm_fclken =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430_DSS_MOD, CM_FCLKEN);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.cam_cm_fclken =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430_CAM_MOD, CM_FCLKEN);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.per_cm_fclken =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.usbhost_cm_fclken =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.core_cm_iclken1 =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(CORE_MOD, CM_ICLKEN1);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.core_cm_iclken2 =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(CORE_MOD, CM_ICLKEN2);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.core_cm_iclken3 =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(CORE_MOD, CM_ICLKEN3);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.sgx_cm_iclken =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_ICLKEN);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.wkup_cm_iclken =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(WKUP_MOD, CM_ICLKEN);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.dss_cm_iclken =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430_DSS_MOD, CM_ICLKEN);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.cam_cm_iclken =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430_CAM_MOD, CM_ICLKEN);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.per_cm_iclken =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.usbhost_cm_iclken =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.iva2_cm_autoidle2 =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_AUTOIDLE2);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.mpu_cm_autoidle2 =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(MPU_MOD, CM_AUTOIDLE2);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.iva2_cm_clkstctrl =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP2_CM_CLKSTCTRL);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.mpu_cm_clkstctrl =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(MPU_MOD, OMAP2_CM_CLKSTCTRL);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.core_cm_clkstctrl =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(CORE_MOD, OMAP2_CM_CLKSTCTRL);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.sgx_cm_clkstctrl =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430ES2_SGX_MOD, OMAP2_CM_CLKSTCTRL);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.dss_cm_clkstctrl =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430_DSS_MOD, OMAP2_CM_CLKSTCTRL);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.cam_cm_clkstctrl =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430_CAM_MOD, OMAP2_CM_CLKSTCTRL);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.per_cm_clkstctrl =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430_PER_MOD, OMAP2_CM_CLKSTCTRL);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.neon_cm_clkstctrl =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430_NEON_MOD, OMAP2_CM_CLKSTCTRL);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.usbhost_cm_clkstctrl =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
OMAP2_CM_CLKSTCTRL);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.core_cm_autoidle1 =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(CORE_MOD, CM_AUTOIDLE1);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.core_cm_autoidle2 =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(CORE_MOD, CM_AUTOIDLE2);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.core_cm_autoidle3 =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(CORE_MOD, CM_AUTOIDLE3);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.wkup_cm_autoidle =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(WKUP_MOD, CM_AUTOIDLE);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.dss_cm_autoidle =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430_DSS_MOD, CM_AUTOIDLE);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.cam_cm_autoidle =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430_CAM_MOD, CM_AUTOIDLE);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.per_cm_autoidle =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.usbhost_cm_autoidle =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_AUTOIDLE);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.sgx_cm_sleepdep =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430ES2_SGX_MOD,
OMAP3430_CM_SLEEPDEP);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.dss_cm_sleepdep =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430_DSS_MOD, OMAP3430_CM_SLEEPDEP);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.cam_cm_sleepdep =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430_CAM_MOD, OMAP3430_CM_SLEEPDEP);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.per_cm_sleepdep =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430_PER_MOD, OMAP3430_CM_SLEEPDEP);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.usbhost_cm_sleepdep =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
OMAP3430_CM_SLEEPDEP);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
cm_context.cm_clkout_ctrl =
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_read_mod_reg(OMAP3430_CCR_MOD,
OMAP3_CM_CLKOUT_CTRL_OFFSET);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
}
void omap3_cm_restore_context(void)
{
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_write_mod_reg(cm_context.iva2_cm_clksel1, OMAP3430_IVA2_MOD,
CM_CLKSEL1);
omap2_cm_write_mod_reg(cm_context.iva2_cm_clksel2, OMAP3430_IVA2_MOD,
CM_CLKSEL2);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
__raw_writel(cm_context.cm_sysconfig, OMAP3430_CM_SYSCONFIG);
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_write_mod_reg(cm_context.sgx_cm_clksel, OMAP3430ES2_SGX_MOD,
CM_CLKSEL);
omap2_cm_write_mod_reg(cm_context.dss_cm_clksel, OMAP3430_DSS_MOD,
CM_CLKSEL);
omap2_cm_write_mod_reg(cm_context.cam_cm_clksel, OMAP3430_CAM_MOD,
CM_CLKSEL);
omap2_cm_write_mod_reg(cm_context.per_cm_clksel, OMAP3430_PER_MOD,
CM_CLKSEL);
omap2_cm_write_mod_reg(cm_context.emu_cm_clksel, OMAP3430_EMU_MOD,
CM_CLKSEL1);
omap2_cm_write_mod_reg(cm_context.emu_cm_clkstctrl, OMAP3430_EMU_MOD,
OMAP2_CM_CLKSTCTRL);
OMAP3: PM: Do not rely on ROM code to restore CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL As per OMAP3 erratum (i671), ROM code adds extra latencies while restoring CM_AUTOIDLE_PLL register, if AUTO_PERIPH_DPLL is equal to 1. This patch stores 0's in scratchpad content area corresponding to AUTO_PERIPH_DPLL, to prevent ROM code to try to lock per DPLL, since it won't respect proper programing scheme. This register is then stored in prcm context. The saving and restore is now done by kernel side. Here follow the erratum description DESCRIPTION After OFF mode transition, among many restorations, the ROM Code restores the CM_AUTOIDLE_PLL register, and after that, it tries to relock the PER DPLL. In case the restoration data stored in scratchpad memory contains a field CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL = 1, then the way the ROM Code restores and locks the PER DPLL does not respect the PER DPLL programming scheme. In that case, the DPLL might not lock. Meanwhile, when trying to lock the PER DPLL, the ROM Code does not hang. Only extra latencies are introduced at wake-up. WORKAROUND When saving the context-restore structure in scratchpad memory, in order to respect the PER DPLL programming scheme, it is advised to store 0 in the CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL field of the saved structure. After wake-up, the application should store in CM_AUTOIDLE_PLL register the right desired value. Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-04-13 22:21:07 +07:00
/*
* As per erratum i671, ROM code does not respect the PER DPLL
* programming scheme if CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL == 1.
* In this case, we need to restore AUTO_PERIPH_DPLL by ourselves.
*/
omap2_cm_write_mod_reg(cm_context.pll_cm_autoidle, PLL_MOD,
CM_AUTOIDLE);
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_write_mod_reg(cm_context.pll_cm_autoidle2, PLL_MOD,
CM_AUTOIDLE2);
omap2_cm_write_mod_reg(cm_context.pll_cm_clksel4, PLL_MOD,
OMAP3430ES2_CM_CLKSEL4);
omap2_cm_write_mod_reg(cm_context.pll_cm_clksel5, PLL_MOD,
OMAP3430ES2_CM_CLKSEL5);
omap2_cm_write_mod_reg(cm_context.pll_cm_clken2, PLL_MOD,
OMAP3430ES2_CM_CLKEN2);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
__raw_writel(cm_context.cm_polctrl, OMAP3430_CM_POLCTRL);
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 11:05:14 +07:00
omap2_cm_write_mod_reg(cm_context.iva2_cm_fclken, OMAP3430_IVA2_MOD,
CM_FCLKEN);
omap2_cm_write_mod_reg(cm_context.iva2_cm_clken_pll, OMAP3430_IVA2_MOD,
OMAP3430_CM_CLKEN_PLL);
omap2_cm_write_mod_reg(cm_context.core_cm_fclken1, CORE_MOD,
CM_FCLKEN1);
omap2_cm_write_mod_reg(cm_context.core_cm_fclken3, CORE_MOD,
OMAP3430ES2_CM_FCLKEN3);
omap2_cm_write_mod_reg(cm_context.sgx_cm_fclken, OMAP3430ES2_SGX_MOD,
CM_FCLKEN);
omap2_cm_write_mod_reg(cm_context.wkup_cm_fclken, WKUP_MOD, CM_FCLKEN);
omap2_cm_write_mod_reg(cm_context.dss_cm_fclken, OMAP3430_DSS_MOD,
CM_FCLKEN);
omap2_cm_write_mod_reg(cm_context.cam_cm_fclken, OMAP3430_CAM_MOD,
CM_FCLKEN);
omap2_cm_write_mod_reg(cm_context.per_cm_fclken, OMAP3430_PER_MOD,
CM_FCLKEN);
omap2_cm_write_mod_reg(cm_context.usbhost_cm_fclken,
OMAP3430ES2_USBHOST_MOD, CM_FCLKEN);
omap2_cm_write_mod_reg(cm_context.core_cm_iclken1, CORE_MOD,
CM_ICLKEN1);
omap2_cm_write_mod_reg(cm_context.core_cm_iclken2, CORE_MOD,
CM_ICLKEN2);
omap2_cm_write_mod_reg(cm_context.core_cm_iclken3, CORE_MOD,
CM_ICLKEN3);
omap2_cm_write_mod_reg(cm_context.sgx_cm_iclken, OMAP3430ES2_SGX_MOD,
CM_ICLKEN);
omap2_cm_write_mod_reg(cm_context.wkup_cm_iclken, WKUP_MOD, CM_ICLKEN);
omap2_cm_write_mod_reg(cm_context.dss_cm_iclken, OMAP3430_DSS_MOD,
CM_ICLKEN);
omap2_cm_write_mod_reg(cm_context.cam_cm_iclken, OMAP3430_CAM_MOD,
CM_ICLKEN);
omap2_cm_write_mod_reg(cm_context.per_cm_iclken, OMAP3430_PER_MOD,
CM_ICLKEN);
omap2_cm_write_mod_reg(cm_context.usbhost_cm_iclken,
OMAP3430ES2_USBHOST_MOD, CM_ICLKEN);
omap2_cm_write_mod_reg(cm_context.iva2_cm_autoidle2, OMAP3430_IVA2_MOD,
CM_AUTOIDLE2);
omap2_cm_write_mod_reg(cm_context.mpu_cm_autoidle2, MPU_MOD,
CM_AUTOIDLE2);
omap2_cm_write_mod_reg(cm_context.iva2_cm_clkstctrl, OMAP3430_IVA2_MOD,
OMAP2_CM_CLKSTCTRL);
omap2_cm_write_mod_reg(cm_context.mpu_cm_clkstctrl, MPU_MOD,
OMAP2_CM_CLKSTCTRL);
omap2_cm_write_mod_reg(cm_context.core_cm_clkstctrl, CORE_MOD,
OMAP2_CM_CLKSTCTRL);
omap2_cm_write_mod_reg(cm_context.sgx_cm_clkstctrl, OMAP3430ES2_SGX_MOD,
OMAP2_CM_CLKSTCTRL);
omap2_cm_write_mod_reg(cm_context.dss_cm_clkstctrl, OMAP3430_DSS_MOD,
OMAP2_CM_CLKSTCTRL);
omap2_cm_write_mod_reg(cm_context.cam_cm_clkstctrl, OMAP3430_CAM_MOD,
OMAP2_CM_CLKSTCTRL);
omap2_cm_write_mod_reg(cm_context.per_cm_clkstctrl, OMAP3430_PER_MOD,
OMAP2_CM_CLKSTCTRL);
omap2_cm_write_mod_reg(cm_context.neon_cm_clkstctrl, OMAP3430_NEON_MOD,
OMAP2_CM_CLKSTCTRL);
omap2_cm_write_mod_reg(cm_context.usbhost_cm_clkstctrl,
OMAP3430ES2_USBHOST_MOD, OMAP2_CM_CLKSTCTRL);
omap2_cm_write_mod_reg(cm_context.core_cm_autoidle1, CORE_MOD,
CM_AUTOIDLE1);
omap2_cm_write_mod_reg(cm_context.core_cm_autoidle2, CORE_MOD,
CM_AUTOIDLE2);
omap2_cm_write_mod_reg(cm_context.core_cm_autoidle3, CORE_MOD,
CM_AUTOIDLE3);
omap2_cm_write_mod_reg(cm_context.wkup_cm_autoidle, WKUP_MOD,
CM_AUTOIDLE);
omap2_cm_write_mod_reg(cm_context.dss_cm_autoidle, OMAP3430_DSS_MOD,
CM_AUTOIDLE);
omap2_cm_write_mod_reg(cm_context.cam_cm_autoidle, OMAP3430_CAM_MOD,
CM_AUTOIDLE);
omap2_cm_write_mod_reg(cm_context.per_cm_autoidle, OMAP3430_PER_MOD,
CM_AUTOIDLE);
omap2_cm_write_mod_reg(cm_context.usbhost_cm_autoidle,
OMAP3430ES2_USBHOST_MOD, CM_AUTOIDLE);
omap2_cm_write_mod_reg(cm_context.sgx_cm_sleepdep, OMAP3430ES2_SGX_MOD,
OMAP3430_CM_SLEEPDEP);
omap2_cm_write_mod_reg(cm_context.dss_cm_sleepdep, OMAP3430_DSS_MOD,
OMAP3430_CM_SLEEPDEP);
omap2_cm_write_mod_reg(cm_context.cam_cm_sleepdep, OMAP3430_CAM_MOD,
OMAP3430_CM_SLEEPDEP);
omap2_cm_write_mod_reg(cm_context.per_cm_sleepdep, OMAP3430_PER_MOD,
OMAP3430_CM_SLEEPDEP);
omap2_cm_write_mod_reg(cm_context.usbhost_cm_sleepdep,
OMAP3430ES2_USBHOST_MOD, OMAP3430_CM_SLEEPDEP);
omap2_cm_write_mod_reg(cm_context.cm_clkout_ctrl, OMAP3430_CCR_MOD,
OMAP3_CM_CLKOUT_CTRL_OFFSET);
OMAP3: PRM/CM: separate CM context save/restore; remove PRM context save/restore The OMAP3 PRM module is in the WKUP powerdomain, which is always powered when the chip is powered, so it shouldn't be necessary to save and restore those PRM registers. Remove the PRM register save/restore code, which should save several microseconds during off-mode entry/exit, since PRM register accesses are relatively slow. While doing so, move the CM register save/restore code into CM-specific code. The CM module has been distinct from the PRM module since 2430. This patch includes some minor changes to pm34xx.c. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 05:30:56 +07:00
}
ARM: OMAP2+: CM/clock: convert _omap2_module_wait_ready() to use SoC-independent CM functions Convert the OMAP clock code's _omap2_module_wait_ready() to use SoC-independent CM functions that are provided by the CM code, rather than using a deprecated function from mach-omap2/prcm.c. This facilitates the future conversion of the CM code to a driver, and also removes a mach-omap2/prcm.c user. mach-omap2/prcm.c will be removed by a subsequent patch. Some modules have IDLEST registers that aren't in the CM module, such as the AM3517 IDLEST bits. So we also need a fallback function for these non-CM odd cases. Create a temporary one in mach-omap2/clock.c, intended to exist until the SCM drivers are ready. Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Vaibhav Hiremath <hvaibhav@ti.com>
2012-10-30 09:56:29 +07:00
/*
*
*/
static struct cm_ll_data omap3xxx_cm_ll_data = {
.split_idlest_reg = &omap3xxx_cm_split_idlest_reg,
.wait_module_ready = &omap3xxx_cm_wait_module_ready,
};
int __init omap3xxx_cm_init(void)
{
if (!cpu_is_omap34xx())
return 0;
return cm_register(&omap3xxx_cm_ll_data);
}
static void __exit omap3xxx_cm_exit(void)
{
if (!cpu_is_omap34xx())
return;
/* Should never happen */
WARN(cm_unregister(&omap3xxx_cm_ll_data),
"%s: cm_ll_data function pointer mismatch\n", __func__);
}
__exitcall(omap3xxx_cm_exit);
Reference in New Issue Copy Permalink