linux_dsm_epyc7002/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts

642 lines
12 KiB
Plaintext
Raw Normal View History

#include "qcom-msm8974pro.dtsi"
#include "qcom-pm8841.dtsi"
#include "qcom-pm8941.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
model = "Sony Xperia Z2 Tablet";
compatible = "sony,xperia-castor", "qcom,msm8974";
aliases {
serial0 = &blsp1_uart2;
};
chosen {
stdout-path = "serial0:115200n8";
};
gpio-keys {
compatible = "gpio-keys";
input-name = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin_a>;
volume-down {
label = "volume_down";
gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEDOWN>;
};
camera-snapshot {
label = "camera_snapshot";
gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA>;
};
camera-focus {
label = "camera_focus";
gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA_FOCUS>;
};
volume-up {
label = "volume_up";
gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEUP>;
};
};
smd {
rpm {
rpm_requests {
pm8941-regulators {
vdd_l1_l3-supply = <&pm8941_s1>;
vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
vdd_l4_l11-supply = <&pm8941_s1>;
vdd_l5_l7-supply = <&pm8941_s2>;
vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
vdd_l21-supply = <&vreg_boost>;
s1 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
};
s2 {
regulator-min-microvolt = <2150000>;
regulator-max-microvolt = <2150000>;
regulator-boot-on;
};
s3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
regulator-system-load = <154000>;
};
s4 {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
l1 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
regulator-always-on;
regulator-boot-on;
};
l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
l3 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
l4 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
l5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
};
l7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
};
l8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l9 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
l11 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1350000>;
};
l12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
l13 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
regulator-boot-on;
};
l14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l15 {
regulator-min-microvolt = <2050000>;
regulator-max-microvolt = <2050000>;
};
l16 {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
};
l17 {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
};
l18 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
l19 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
l20 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
regulator-allow-set-load;
regulator-boot-on;
regulator-allow-set-load;
regulator-system-load = <500000>;
};
l21 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
regulator-boot-on;
};
l22 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
l23 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
l24 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
regulator-boot-on;
};
};
};
};
};
vreg_bl_vddio: lcd-backlight-vddio {
compatible = "regulator-fixed";
regulator-name = "vreg_bl_vddio";
regulator-min-microvolt = <3150000>;
regulator-max-microvolt = <3150000>;
gpio = <&msmgpio 69 0>;
enable-active-high;
vin-supply = <&pm8941_s3>;
startup-delay-us = <70000>;
pinctrl-names = "default";
pinctrl-0 = <&lcd_backlight_en_pin_a>;
};
vreg_vsp: lcd-dcdc-regulator {
compatible = "regulator-fixed";
regulator-name = "vreg_vsp";
regulator-min-microvolt = <5600000>;
regulator-max-microvolt = <5600000>;
gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&lcd_dcdc_en_pin_a>;
};
vreg_wlan: wlan-regulator {
compatible = "regulator-fixed";
regulator-name = "wl-reg";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&wlan_regulator_pin>;
};
};
&soc {
sdhci@f9824900 {
status = "ok";
vmmc-supply = <&pm8941_l20>;
vqmmc-supply = <&pm8941_s3>;
bus-width = <8>;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&sdhc1_pin_a>;
};
sdhci@f9864900 {
status = "ok";
max-frequency = <100000000>;
non-removable;
vmmc-supply = <&vreg_wlan>;
pinctrl-names = "default";
pinctrl-0 = <&sdhc3_pin_a>;
#address-cells = <1>;
#size-cells = <0>;
bcrmf@1 {
compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
reg = <1>;
brcm,drive-strength = <10>;
pinctrl-names = "default";
pinctrl-0 = <&wlan_sleep_clk_pin>;
};
};
sdhci@f98a4900 {
status = "ok";
bus-width = <4>;
vmmc-supply = <&pm8941_l21>;
vqmmc-supply = <&pm8941_l13>;
cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
};
serial@f991e000 {
status = "ok";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_uart2_pin_a>;
};
usb@f9a55000 {
status = "ok";
phys = <&usb_hs1_phy>;
phy-select = <&tcsr 0xb000 0>;
extcon = <&smbb>, <&usb_id>;
vbus-supply = <&chg_otg>;
hnp-disable;
srp-disable;
adp-disable;
ulpi {
phy@a {
status = "ok";
v1p8-supply = <&pm8941_l6>;
v3p3-supply = <&pm8941_l24>;
extcon = <&smbb>;
qcom,init-seq = /bits/ 8 <0x1 0x64>;
};
};
};
pinctrl@fd510000 {
blsp1_uart2_pin_a: blsp1-uart2-pin-active {
rx {
pins = "gpio5";
function = "blsp_uart2";
drive-strength = <2>;
bias-pull-up;
};
tx {
pins = "gpio4";
function = "blsp_uart2";
drive-strength = <4>;
bias-disable;
};
};
i2c8_pins: i2c8 {
mux {
pins = "gpio47", "gpio48";
function = "blsp_i2c8";
drive-strength = <2>;
bias-disable;
};
};
i2c11_pins: i2c11 {
mux {
pins = "gpio83", "gpio84";
function = "blsp_i2c11";
drive-strength = <2>;
bias-disable;
};
};
lcd_backlight_en_pin_a: lcd-backlight-vddio {
pins = "gpio69";
drive-strength = <10>;
output-low;
bias-disable;
};
sdhc1_pin_a: sdhc1-pin-active {
clk {
pins = "sdc1_clk";
drive-strength = <16>;
bias-disable;
};
cmd-data {
pins = "sdc1_cmd", "sdc1_data";
drive-strength = <10>;
bias-pull-up;
};
};
sdhc2_cd_pin_a: sdhc2-cd-pin-active {
pins = "gpio62";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
sdhc2_pin_a: sdhc2-pin-active {
clk {
pins = "sdc2_clk";
drive-strength = <6>;
bias-disable;
};
cmd-data {
pins = "sdc2_cmd", "sdc2_data";
drive-strength = <6>;
bias-pull-up;
};
};
sdhc3_pin_a: sdhc3-pin-active {
clk {
pins = "gpio40";
function = "sdc3";
drive-strength = <10>;
bias-disable;
};
cmd {
pins = "gpio39";
function = "sdc3";
drive-strength = <10>;
bias-pull-up;
};
data {
pins = "gpio35", "gpio36", "gpio37", "gpio38";
function = "sdc3";
drive-strength = <10>;
bias-pull-up;
};
};
ts_int_pin: synaptics {
pin {
pins = "gpio86";
function = "gpio";
drive-strength = <2>;
bias-disable;
input-enable;
};
};
};
i2c@f9964000 {
status = "ok";
clock-frequency = <355000>;
qcom,src-freq = <50000000>;
pinctrl-names = "default";
pinctrl-0 = <&i2c8_pins>;
synaptics@2c {
compatible = "syna,rmi-i2c";
reg = <0x2c>;
interrupt-parent = <&msmgpio>;
interrupts = <86 IRQ_TYPE_EDGE_FALLING>;
#address-cells = <1>;
#size-cells = <0>;
vdd-supply = <&pm8941_l22>;
vio-supply = <&pm8941_lvs3>;
pinctrl-names = "default";
pinctrl-0 = <&ts_int_pin>;
rmi-f01@1 {
reg = <0x1>;
syna,nosleep = <1>;
};
rmi-f11@11 {
reg = <0x11>;
syna,f11-flip-x = <1>;
syna,sensor-type = <1>;
};
};
};
i2c@f9967000 {
status = "ok";
pinctrl-names = "default";
pinctrl-0 = <&i2c11_pins>;
clock-frequency = <355000>;
qcom,src-freq = <50000000>;
lp8566_wled: backlight@2c {
compatible = "ti,lp8556";
reg = <0x2c>;
power-supply = <&vreg_bl_vddio>;
bl-name = "backlight";
dev-ctrl = /bits/ 8 <0x05>;
init-brt = /bits/ 8 <0x3f>;
rom_a0h {
rom-addr = /bits/ 8 <0xa0>;
rom-val = /bits/ 8 <0xff>;
};
rom_a1h {
rom-addr = /bits/ 8 <0xa1>;
rom-val = /bits/ 8 <0x3f>;
};
rom_a2h {
rom-addr = /bits/ 8 <0xa2>;
rom-val = /bits/ 8 <0x20>;
};
rom_a3h {
rom-addr = /bits/ 8 <0xa3>;
rom-val = /bits/ 8 <0x5e>;
};
rom_a4h {
rom-addr = /bits/ 8 <0xa4>;
rom-val = /bits/ 8 <0x02>;
};
rom_a5h {
rom-addr = /bits/ 8 <0xa5>;
rom-val = /bits/ 8 <0x04>;
};
rom_a6h {
rom-addr = /bits/ 8 <0xa6>;
rom-val = /bits/ 8 <0x80>;
};
rom_a7h {
rom-addr = /bits/ 8 <0xa7>;
rom-val = /bits/ 8 <0xf7>;
};
rom_a9h {
rom-addr = /bits/ 8 <0xa9>;
rom-val = /bits/ 8 <0x80>;
};
rom_aah {
rom-addr = /bits/ 8 <0xaa>;
rom-val = /bits/ 8 <0x0f>;
};
rom_aeh {
rom-addr = /bits/ 8 <0xae>;
rom-val = /bits/ 8 <0x0f>;
};
};
};
};
&spmi_bus {
pm8941@0 {
charger@1000 {
qcom,fast-charge-safe-current = <1500000>;
qcom,fast-charge-current-limit = <1500000>;
qcom,dc-current-limit = <1800000>;
qcom,fast-charge-safe-voltage = <4400000>;
qcom,fast-charge-high-threshold-voltage = <4350000>;
qcom,fast-charge-low-threshold-voltage = <3400000>;
qcom,auto-recharge-threshold-voltage = <4200000>;
qcom,minimum-input-voltage = <4300000>;
};
gpios@c000 {
gpio_keys_pin_a: gpio-keys-active {
pins = "gpio2", "gpio5";
function = "normal";
bias-pull-up;
power-source = <PM8941_GPIO_S3>;
};
wlan_sleep_clk_pin: wl-sleep-clk {
pins = "gpio17";
function = "func2";
output-high;
power-source = <PM8941_GPIO_S3>;
};
wlan_regulator_pin: wl-reg-active {
pins = "gpio18";
function = "normal";
bias-disable;
power-source = <PM8941_GPIO_S3>;
};
lcd_dcdc_en_pin_a: lcd-dcdc-en-active {
pins = "gpio20";
function = "normal";
bias-disable;
power-source = <PM8941_GPIO_S3>;
input-disable;
output-low;
};
};
coincell@2800 {
status = "ok";
qcom,rset-ohms = <2100>;
qcom,vset-millivolts = <3000>;
};
};
};