linux_dsm_epyc7002/drivers/usb/usbip/vhci_hcd.c

1285 lines
30 KiB
C
Raw Normal View History

/*
* Copyright (C) 2003-2008 Takahiro Hirofuchi
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
* Copyright (C) 2015-2016 Nobuo Iwata
*
* This is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
* USA.
*/
#include <linux/init.h>
#include <linux/file.h>
#include <linux/kernel.h>
#include <linux/kthread.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include "usbip_common.h"
#include "vhci.h"
#define DRIVER_AUTHOR "Takahiro Hirofuchi"
#define DRIVER_DESC "USB/IP 'Virtual' Host Controller (VHCI) Driver"
/*
* TODO
* - update root hub emulation
* - move the emulation code to userland ?
* porting to other operating systems
* minimize kernel code
* - add suspend/resume code
* - clean up everything
*/
/* See usb gadget dummy hcd */
static int vhci_hub_status(struct usb_hcd *hcd, char *buff);
static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u16 wIndex, char *buff, u16 wLength);
static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
gfp_t mem_flags);
static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
static int vhci_start(struct usb_hcd *vhci_hcd);
static void vhci_stop(struct usb_hcd *hcd);
static int vhci_get_frame_number(struct usb_hcd *hcd);
static const char driver_name[] = "vhci_hcd";
static const char driver_desc[] = "USB/IP Virtual Host Controller";
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
int vhci_num_controllers = VHCI_NR_HCS;
struct platform_device **vhci_pdevs;
static const char * const bit_desc[] = {
"CONNECTION", /*0*/
"ENABLE", /*1*/
"SUSPEND", /*2*/
"OVER_CURRENT", /*3*/
"RESET", /*4*/
"R5", /*5*/
"R6", /*6*/
"R7", /*7*/
"POWER", /*8*/
"LOWSPEED", /*9*/
"HIGHSPEED", /*10*/
"PORT_TEST", /*11*/
"INDICATOR", /*12*/
"R13", /*13*/
"R14", /*14*/
"R15", /*15*/
"C_CONNECTION", /*16*/
"C_ENABLE", /*17*/
"C_SUSPEND", /*18*/
"C_OVER_CURRENT", /*19*/
"C_RESET", /*20*/
"R21", /*21*/
"R22", /*22*/
"R23", /*23*/
"R24", /*24*/
"R25", /*25*/
"R26", /*26*/
"R27", /*27*/
"R28", /*28*/
"R29", /*29*/
"R30", /*30*/
"R31", /*31*/
};
static void dump_port_status_diff(u32 prev_status, u32 new_status)
{
int i = 0;
u32 bit = 1;
pr_debug("status prev -> new: %08x -> %08x\n", prev_status, new_status);
while (bit) {
u32 prev = prev_status & bit;
u32 new = new_status & bit;
char change;
if (!prev && new)
change = '+';
else if (prev && !new)
change = '-';
else
change = ' ';
if (prev || new)
pr_debug(" %c%s\n", change, bit_desc[i]);
bit <<= 1;
i++;
}
pr_debug("\n");
}
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
void rh_port_connect(struct vhci_device *vdev, enum usb_device_speed speed)
{
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
struct vhci_hcd *vhci = vdev_to_vhci(vdev);
int rhport = vdev->rhport;
u32 status;
unsigned long flags;
usbip_dbg_vhci_rh("rh_port_connect %d\n", rhport);
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
spin_lock_irqsave(&vhci->lock, flags);
status = vhci->port_status[rhport];
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
status |= USB_PORT_STAT_CONNECTION | (1 << USB_PORT_FEAT_C_CONNECTION);
switch (speed) {
case USB_SPEED_HIGH:
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
status |= USB_PORT_STAT_HIGH_SPEED;
break;
case USB_SPEED_LOW:
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
status |= USB_PORT_STAT_LOW_SPEED;
break;
default:
break;
}
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
vhci->port_status[rhport] = status;
spin_unlock_irqrestore(&vhci->lock, flags);
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
usb_hcd_poll_rh_status(vhci_to_hcd(vhci));
}
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
static void rh_port_disconnect(struct vhci_device *vdev)
{
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
struct vhci_hcd *vhci = vdev_to_vhci(vdev);
int rhport = vdev->rhport;
u32 status;
unsigned long flags;
usbip_dbg_vhci_rh("rh_port_disconnect %d\n", rhport);
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
spin_lock_irqsave(&vhci->lock, flags);
status = vhci->port_status[rhport];
status &= ~USB_PORT_STAT_CONNECTION;
status |= (1 << USB_PORT_FEAT_C_CONNECTION);
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
vhci->port_status[rhport] = status;
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
spin_unlock_irqrestore(&vhci->lock, flags);
usb_hcd_poll_rh_status(vhci_to_hcd(vhci));
}
#define PORT_C_MASK \
((USB_PORT_STAT_C_CONNECTION \
| USB_PORT_STAT_C_ENABLE \
| USB_PORT_STAT_C_SUSPEND \
| USB_PORT_STAT_C_OVERCURRENT \
| USB_PORT_STAT_C_RESET) << 16)
/*
* Returns 0 if the status hasn't changed, or the number of bytes in buf.
* Ports are 0-indexed from the HCD point of view,
* and 1-indexed from the USB core pointer of view.
*
* @buf: a bitmap to show which port status has been changed.
* bit 0: reserved
* bit 1: the status of port 0 has been changed.
* bit 2: the status of port 1 has been changed.
* ...
*/
static int vhci_hub_status(struct usb_hcd *hcd, char *buf)
{
struct vhci_hcd *vhci;
int retval;
int rhport;
int changed = 0;
unsigned long flags;
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
retval = DIV_ROUND_UP(VHCI_HC_PORTS + 1, 8);
memset(buf, 0, retval);
vhci = hcd_to_vhci(hcd);
spin_lock_irqsave(&vhci->lock, flags);
if (!HCD_HW_ACCESSIBLE(hcd)) {
usbip_dbg_vhci_rh("hw accessible flag not on?\n");
goto done;
}
/* check pseudo status register for each port */
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) {
if ((vhci->port_status[rhport] & PORT_C_MASK)) {
/* The status of a port has been changed, */
usbip_dbg_vhci_rh("port %d status changed\n", rhport);
buf[(rhport + 1) / 8] |= 1 << (rhport + 1) % 8;
changed = 1;
}
}
if ((hcd->state == HC_STATE_SUSPENDED) && (changed == 1))
usb_hcd_resume_root_hub(hcd);
done:
spin_unlock_irqrestore(&vhci->lock, flags);
return changed ? retval : 0;
}
static inline void hub_descriptor(struct usb_hub_descriptor *desc)
{
memset(desc, 0, sizeof(*desc));
desc->bDescriptorType = USB_DT_HUB;
desc->bDescLength = 9;
desc->wHubCharacteristics = cpu_to_le16(
HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM);
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
desc->bNbrPorts = VHCI_HC_PORTS;
USB 3.0 Hub Changes Update the USB core to deal with USB 3.0 hubs. These hubs have a slightly different hub descriptor than USB 2.0 hubs, with a fixed (rather than variable length) size. Change the USB core's hub descriptor to have a union for the last fields that differ. Change the host controller drivers that access those last fields (DeviceRemovable and PortPowerCtrlMask) to use the union. Translate the new version of the hub port status field into the old version that khubd understands. (Note: we need to fix it to translate the roothub's port status once we stop converting it to USB 2.0 hub status internally.) Add new code to handle link state change status. Send out new control messages that are needed for USB 3.0 hubs, like Set Hub Depth. This patch is a modified version of the original patch submitted by John Youn. It's updated to reflect the removal of the "bitmap" #define, and change the hub descriptor accesses of a couple new host controller drivers. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Cc: Tony Olech <tony.olech@elandigitalsystems.com> Cc: "Robert P. J. Day" <rpjday@crashcourse.ca> Cc: Max Vozeler <mvz@vozeler.com> Cc: Tejun Heo <tj@kernel.org> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Rodolfo Giometti <giometti@linux.it> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Anton Vorontsov <avorontsov@mvista.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Lothar Wassmann <LW@KARO-electronics.de> Cc: Olav Kongas <ok@artecdesign.ee> Cc: Martin Fuzzey <mfuzzey@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <dbrownell@users.sourceforge.net>
2001-09-17 14:00:00 +07:00
desc->u.hs.DeviceRemovable[0] = 0xff;
desc->u.hs.DeviceRemovable[1] = 0xff;
}
static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u16 wIndex, char *buf, u16 wLength)
{
struct vhci_hcd *dum;
int retval = 0;
int rhport;
unsigned long flags;
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
u32 prev_port_status[VHCI_HC_PORTS];
if (!HCD_HW_ACCESSIBLE(hcd))
return -ETIMEDOUT;
/*
* NOTE:
* wIndex shows the port number and begins from 1.
*/
usbip_dbg_vhci_rh("typeReq %x wValue %x wIndex %x\n", typeReq, wValue,
wIndex);
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
if (wIndex > VHCI_HC_PORTS)
pr_err("invalid port number %d\n", wIndex);
rhport = ((__u8)(wIndex & 0x00ff)) - 1;
dum = hcd_to_vhci(hcd);
spin_lock_irqsave(&dum->lock, flags);
/* store old status and compare now and old later */
if (usbip_dbg_flag_vhci_rh) {
memcpy(prev_port_status, dum->port_status,
sizeof(prev_port_status));
}
switch (typeReq) {
case ClearHubFeature:
usbip_dbg_vhci_rh(" ClearHubFeature\n");
break;
case ClearPortFeature:
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
if (dum->port_status[rhport] & USB_PORT_STAT_SUSPEND) {
/* 20msec signaling */
dum->resuming = 1;
dum->re_timeout =
jiffies + msecs_to_jiffies(20);
}
break;
case USB_PORT_FEAT_POWER:
usbip_dbg_vhci_rh(
" ClearPortFeature: USB_PORT_FEAT_POWER\n");
dum->port_status[rhport] = 0;
dum->resuming = 0;
break;
case USB_PORT_FEAT_C_RESET:
usbip_dbg_vhci_rh(
" ClearPortFeature: USB_PORT_FEAT_C_RESET\n");
switch (dum->vdev[rhport].speed) {
case USB_SPEED_HIGH:
dum->port_status[rhport] |=
USB_PORT_STAT_HIGH_SPEED;
break;
case USB_SPEED_LOW:
dum->port_status[rhport] |=
USB_PORT_STAT_LOW_SPEED;
break;
default:
break;
}
default:
usbip_dbg_vhci_rh(" ClearPortFeature: default %x\n",
wValue);
dum->port_status[rhport] &= ~(1 << wValue);
break;
}
break;
case GetHubDescriptor:
usbip_dbg_vhci_rh(" GetHubDescriptor\n");
hub_descriptor((struct usb_hub_descriptor *) buf);
break;
case GetHubStatus:
usbip_dbg_vhci_rh(" GetHubStatus\n");
*(__le32 *) buf = cpu_to_le32(0);
break;
case GetPortStatus:
usbip_dbg_vhci_rh(" GetPortStatus port %x\n", wIndex);
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
if (wIndex > VHCI_HC_PORTS || wIndex < 1) {
pr_err("invalid port number %d\n", wIndex);
retval = -EPIPE;
}
/* we do not care about resume. */
/* whoever resets or resumes must GetPortStatus to
* complete it!!
*/
if (dum->resuming && time_after(jiffies, dum->re_timeout)) {
dum->port_status[rhport] |=
(1 << USB_PORT_FEAT_C_SUSPEND);
dum->port_status[rhport] &=
~(1 << USB_PORT_FEAT_SUSPEND);
dum->resuming = 0;
dum->re_timeout = 0;
}
if ((dum->port_status[rhport] & (1 << USB_PORT_FEAT_RESET)) !=
0 && time_after(jiffies, dum->re_timeout)) {
dum->port_status[rhport] |=
(1 << USB_PORT_FEAT_C_RESET);
dum->port_status[rhport] &=
~(1 << USB_PORT_FEAT_RESET);
dum->re_timeout = 0;
if (dum->vdev[rhport].ud.status ==
VDEV_ST_NOTASSIGNED) {
usbip_dbg_vhci_rh(
" enable rhport %d (status %u)\n",
rhport,
dum->vdev[rhport].ud.status);
dum->port_status[rhport] |=
USB_PORT_STAT_ENABLE;
}
}
((__le16 *) buf)[0] = cpu_to_le16(dum->port_status[rhport]);
((__le16 *) buf)[1] =
cpu_to_le16(dum->port_status[rhport] >> 16);
usbip_dbg_vhci_rh(" GetPortStatus bye %x %x\n", ((u16 *)buf)[0],
((u16 *)buf)[1]);
break;
case SetHubFeature:
usbip_dbg_vhci_rh(" SetHubFeature\n");
retval = -EPIPE;
break;
case SetPortFeature:
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
usbip_dbg_vhci_rh(
" SetPortFeature: USB_PORT_FEAT_SUSPEND\n");
break;
case USB_PORT_FEAT_RESET:
usbip_dbg_vhci_rh(
" SetPortFeature: USB_PORT_FEAT_RESET\n");
/* if it's already running, disconnect first */
if (dum->port_status[rhport] & USB_PORT_STAT_ENABLE) {
dum->port_status[rhport] &=
~(USB_PORT_STAT_ENABLE |
USB_PORT_STAT_LOW_SPEED |
USB_PORT_STAT_HIGH_SPEED);
/* FIXME test that code path! */
}
/* 50msec reset signaling */
dum->re_timeout = jiffies + msecs_to_jiffies(50);
/* FALLTHROUGH */
default:
usbip_dbg_vhci_rh(" SetPortFeature: default %d\n",
wValue);
dum->port_status[rhport] |= (1 << wValue);
break;
}
break;
default:
pr_err("default: no such request\n");
/* "protocol stall" on error */
retval = -EPIPE;
}
if (usbip_dbg_flag_vhci_rh) {
pr_debug("port %d\n", rhport);
/* Only dump valid port status */
if (rhport >= 0) {
dump_port_status_diff(prev_port_status[rhport],
dum->port_status[rhport]);
}
}
usbip_dbg_vhci_rh(" bye\n");
spin_unlock_irqrestore(&dum->lock, flags);
return retval;
}
static struct vhci_device *get_vdev(struct usb_device *udev)
{
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
struct platform_device *pdev;
struct usb_hcd *hcd;
struct vhci_hcd *vhci;
int pdev_nr, rhport;
if (!udev)
return NULL;
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
for (pdev_nr = 0; pdev_nr < vhci_num_controllers; pdev_nr++) {
pdev = *(vhci_pdevs + pdev_nr);
if (pdev == NULL)
continue;
hcd = platform_get_drvdata(pdev);
if (hcd == NULL)
continue;
vhci = hcd_to_vhci(hcd);
for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) {
if (vhci->vdev[rhport].udev == udev)
return &vhci->vdev[rhport];
}
}
return NULL;
}
static void vhci_tx_urb(struct urb *urb)
{
struct vhci_device *vdev = get_vdev(urb->dev);
struct vhci_priv *priv;
struct vhci_hcd *vhci;
unsigned long flags;
if (!vdev) {
pr_err("could not get virtual device");
return;
}
vhci = vdev_to_vhci(vdev);
priv = kzalloc(sizeof(struct vhci_priv), GFP_ATOMIC);
if (!priv) {
usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC);
return;
}
spin_lock_irqsave(&vdev->priv_lock, flags);
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
priv->seqnum = atomic_inc_return(&vhci->seqnum);
if (priv->seqnum == 0xffff)
dev_info(&urb->dev->dev, "seqnum max\n");
priv->vdev = vdev;
priv->urb = urb;
urb->hcpriv = (void *) priv;
list_add_tail(&priv->list, &vdev->priv_tx);
wake_up(&vdev->waitq_tx);
spin_unlock_irqrestore(&vdev->priv_lock, flags);
}
static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
gfp_t mem_flags)
{
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
struct vhci_hcd *vhci = hcd_to_vhci(hcd);
struct device *dev = &urb->dev->dev;
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
u8 portnum = urb->dev->portnum;
int ret = 0;
struct vhci_device *vdev;
unsigned long flags;
usbip_dbg_vhci_hc("enter, usb_hcd %p urb %p mem_flags %d\n",
hcd, urb, mem_flags);
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
if (portnum > VHCI_HC_PORTS) {
pr_err("invalid port number %d\n", portnum);
return -ENODEV;
}
vdev = &vhci->vdev[portnum-1];
/* patch to usb_sg_init() is in 2.5.60 */
BUG_ON(!urb->transfer_buffer && urb->transfer_buffer_length);
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
spin_lock_irqsave(&vhci->lock, flags);
if (urb->status != -EINPROGRESS) {
dev_err(dev, "URB already unlinked!, status %d\n", urb->status);
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
spin_unlock_irqrestore(&vhci->lock, flags);
return urb->status;
}
/* refuse enqueue for dead connection */
spin_lock(&vdev->ud.lock);
if (vdev->ud.status == VDEV_ST_NULL ||
vdev->ud.status == VDEV_ST_ERROR) {
dev_err(dev, "enqueue for inactive port %d\n", vdev->rhport);
spin_unlock(&vdev->ud.lock);
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
spin_unlock_irqrestore(&vhci->lock, flags);
return -ENODEV;
}
spin_unlock(&vdev->ud.lock);
ret = usb_hcd_link_urb_to_ep(hcd, urb);
if (ret)
goto no_need_unlink;
/*
* The enumeration process is as follows;
*
* 1. Get_Descriptor request to DevAddrs(0) EndPoint(0)
* to get max packet length of default pipe
*
* 2. Set_Address request to DevAddr(0) EndPoint(0)
*
*/
if (usb_pipedevice(urb->pipe) == 0) {
__u8 type = usb_pipetype(urb->pipe);
struct usb_ctrlrequest *ctrlreq =
(struct usb_ctrlrequest *) urb->setup_packet;
if (type != PIPE_CONTROL || !ctrlreq) {
dev_err(dev, "invalid request to devnum 0\n");
ret = -EINVAL;
goto no_need_xmit;
}
switch (ctrlreq->bRequest) {
case USB_REQ_SET_ADDRESS:
/* set_address may come when a device is reset */
dev_info(dev, "SetAddress Request (%d) to port %d\n",
ctrlreq->wValue, vdev->rhport);
usb_put_dev(vdev->udev);
staging: usbip: vhci: update reference count for usb_device This fixes an oops observed when reading status during removal of a device: [ 1706.648285] general protection fault: 0000 [#1] SMP [ 1706.648294] last sysfs file: /sys/devices/platform/vhci_hcd/status [ 1706.648297] CPU 1 [ 1706.648300] Modules linked in: binfmt_misc microcode fuse loop vhci_hcd(N) usbip(N) usbcore usbip_common_mod(N) rtc_core rtc_lib joydev dm_mirror dm_region_hash dm_log linear dm_snapshot xennet dm_mod ext3 mbcache jbd processor thermal_sys hwmon xenblk cdrom [ 1706.648324] Supported: Yes [ 1706.648327] Pid: 10422, comm: usbip Tainted: G N 2.6.32.12-0.7-xen #1 [ 1706.648330] RIP: e030:[<ffffffff801b10d5>] [<ffffffff801b10d5>] strnlen+0x5/0x40 [ 1706.648340] RSP: e02b:ffff8800a994dd30 EFLAGS: 00010286 [ 1706.648343] RAX: ffffffff80481ec1 RBX: 0000000000000000 RCX: 0000000000000002 [ 1706.648347] RDX: 00200d1d4f1c001c RSI: ffffffffffffffff RDI: 00200d1d4f1c001c [ 1706.648350] RBP: ffff880129a1c0aa R08: ffffffffa01901c4 R09: 0000000000000006 [ 1706.648353] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800a9a1c0ab [ 1706.648357] R13: 00200d1d4f1c001c R14: 00000000ffffffff R15: ffff880129a1c0aa [ 1706.648363] FS: 00007f2f2e9ca700(0000) GS:ffff880001018000(0000) knlGS:0000000000000000 [ 1706.648367] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1706.648370] CR2: 000000000071b048 CR3: 00000000b4b68000 CR4: 0000000000002660 [ 1706.648374] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1706.648378] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 1706.648381] Process usbip (pid: 10422, threadinfo ffff8800a994c000, task ffff88007b170200) [ 1706.648385] Stack: [ 1706.648387] ffffffff801b28c9 0000000000000002 ffffffffa01901c4 ffff8800a9a1c0ab [ 1706.648391] <0> ffffffffa01901c6 ffff8800a994de08 ffffffff801b339b 0000000000000004 [ 1706.648397] <0> 0000000affffffff ffffffffffffffff 00000000000067c0 0000000000000000 [ 1706.648404] Call Trace: [ 1706.648413] [<ffffffff801b28c9>] string+0x39/0xe0 [ 1706.648419] [<ffffffff801b339b>] vsnprintf+0x1eb/0x620 [ 1706.648423] [<ffffffff801b3813>] sprintf+0x43/0x50 [ 1706.648429] [<ffffffffa018d719>] show_status+0x1b9/0x220 [vhci_hcd] [ 1706.648438] [<ffffffff8024a2b7>] dev_attr_show+0x27/0x60 [ 1706.648445] [<ffffffff80144821>] sysfs_read_file+0x101/0x1d0 [ 1706.648451] [<ffffffff800da4a7>] vfs_read+0xc7/0x130 [ 1706.648457] [<ffffffff800da613>] sys_read+0x53/0xa0 [ 1706.648462] [<ffffffff80007458>] system_call_fastpath+0x16/0x1b [ 1706.648468] [<00007f2f2de40f30>] 0x7f2f2de40f30 [ 1706.648470] Code: 66 0f 1f 44 00 00 48 83 c2 01 80 3a 00 75 f7 48 89 d0 48 29 f8 f3 c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 48 85 f6 74 29 <80> 3f 00 74 24 48 8d 56 ff 48 89 f8 eb 0e 0f 1f 44 00 00 48 83 [ 1706.648507] RIP [<ffffffff801b10d5>] strnlen+0x5/0x40 [ 1706.648511] RSP <ffff8800a994dd30> [ 1706.649575] ---[ end trace b4eb72bf2e149593 ]--- Signed-off-by: Max Vozeler <max@vozeler.com> Tested-by: Mark Wehby <MWehby@luxotticaRetail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-12 20:02:00 +07:00
vdev->udev = usb_get_dev(urb->dev);
spin_lock(&vdev->ud.lock);
vdev->ud.status = VDEV_ST_USED;
spin_unlock(&vdev->ud.lock);
if (urb->status == -EINPROGRESS) {
/* This request is successfully completed. */
/* If not -EINPROGRESS, possibly unlinked. */
urb->status = 0;
}
goto no_need_xmit;
case USB_REQ_GET_DESCRIPTOR:
if (ctrlreq->wValue == cpu_to_le16(USB_DT_DEVICE << 8))
usbip_dbg_vhci_hc(
"Not yet?:Get_Descriptor to device 0 (get max pipe size)\n");
usb_put_dev(vdev->udev);
staging: usbip: vhci: update reference count for usb_device This fixes an oops observed when reading status during removal of a device: [ 1706.648285] general protection fault: 0000 [#1] SMP [ 1706.648294] last sysfs file: /sys/devices/platform/vhci_hcd/status [ 1706.648297] CPU 1 [ 1706.648300] Modules linked in: binfmt_misc microcode fuse loop vhci_hcd(N) usbip(N) usbcore usbip_common_mod(N) rtc_core rtc_lib joydev dm_mirror dm_region_hash dm_log linear dm_snapshot xennet dm_mod ext3 mbcache jbd processor thermal_sys hwmon xenblk cdrom [ 1706.648324] Supported: Yes [ 1706.648327] Pid: 10422, comm: usbip Tainted: G N 2.6.32.12-0.7-xen #1 [ 1706.648330] RIP: e030:[<ffffffff801b10d5>] [<ffffffff801b10d5>] strnlen+0x5/0x40 [ 1706.648340] RSP: e02b:ffff8800a994dd30 EFLAGS: 00010286 [ 1706.648343] RAX: ffffffff80481ec1 RBX: 0000000000000000 RCX: 0000000000000002 [ 1706.648347] RDX: 00200d1d4f1c001c RSI: ffffffffffffffff RDI: 00200d1d4f1c001c [ 1706.648350] RBP: ffff880129a1c0aa R08: ffffffffa01901c4 R09: 0000000000000006 [ 1706.648353] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800a9a1c0ab [ 1706.648357] R13: 00200d1d4f1c001c R14: 00000000ffffffff R15: ffff880129a1c0aa [ 1706.648363] FS: 00007f2f2e9ca700(0000) GS:ffff880001018000(0000) knlGS:0000000000000000 [ 1706.648367] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1706.648370] CR2: 000000000071b048 CR3: 00000000b4b68000 CR4: 0000000000002660 [ 1706.648374] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1706.648378] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 1706.648381] Process usbip (pid: 10422, threadinfo ffff8800a994c000, task ffff88007b170200) [ 1706.648385] Stack: [ 1706.648387] ffffffff801b28c9 0000000000000002 ffffffffa01901c4 ffff8800a9a1c0ab [ 1706.648391] <0> ffffffffa01901c6 ffff8800a994de08 ffffffff801b339b 0000000000000004 [ 1706.648397] <0> 0000000affffffff ffffffffffffffff 00000000000067c0 0000000000000000 [ 1706.648404] Call Trace: [ 1706.648413] [<ffffffff801b28c9>] string+0x39/0xe0 [ 1706.648419] [<ffffffff801b339b>] vsnprintf+0x1eb/0x620 [ 1706.648423] [<ffffffff801b3813>] sprintf+0x43/0x50 [ 1706.648429] [<ffffffffa018d719>] show_status+0x1b9/0x220 [vhci_hcd] [ 1706.648438] [<ffffffff8024a2b7>] dev_attr_show+0x27/0x60 [ 1706.648445] [<ffffffff80144821>] sysfs_read_file+0x101/0x1d0 [ 1706.648451] [<ffffffff800da4a7>] vfs_read+0xc7/0x130 [ 1706.648457] [<ffffffff800da613>] sys_read+0x53/0xa0 [ 1706.648462] [<ffffffff80007458>] system_call_fastpath+0x16/0x1b [ 1706.648468] [<00007f2f2de40f30>] 0x7f2f2de40f30 [ 1706.648470] Code: 66 0f 1f 44 00 00 48 83 c2 01 80 3a 00 75 f7 48 89 d0 48 29 f8 f3 c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 48 85 f6 74 29 <80> 3f 00 74 24 48 8d 56 ff 48 89 f8 eb 0e 0f 1f 44 00 00 48 83 [ 1706.648507] RIP [<ffffffff801b10d5>] strnlen+0x5/0x40 [ 1706.648511] RSP <ffff8800a994dd30> [ 1706.649575] ---[ end trace b4eb72bf2e149593 ]--- Signed-off-by: Max Vozeler <max@vozeler.com> Tested-by: Mark Wehby <MWehby@luxotticaRetail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-12 20:02:00 +07:00
vdev->udev = usb_get_dev(urb->dev);
goto out;
default:
/* NOT REACHED */
dev_err(dev,
"invalid request to devnum 0 bRequest %u, wValue %u\n",
ctrlreq->bRequest,
ctrlreq->wValue);
ret = -EINVAL;
goto no_need_xmit;
}
}
out:
vhci_tx_urb(urb);
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
spin_unlock_irqrestore(&vhci->lock, flags);
return 0;
no_need_xmit:
usb_hcd_unlink_urb_from_ep(hcd, urb);
no_need_unlink:
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
spin_unlock_irqrestore(&vhci->lock, flags);
if (!ret)
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
usb_hcd_giveback_urb(hcd, urb, urb->status);
return ret;
}
/*
* vhci_rx gives back the urb after receiving the reply of the urb. If an
* unlink pdu is sent or not, vhci_rx receives a normal return pdu and gives
* back its urb. For the driver unlinking the urb, the content of the urb is
* not important, but the calling to its completion handler is important; the
* completion of unlinking is notified by the completion handler.
*
*
* CLIENT SIDE
*
* - When vhci_hcd receives RET_SUBMIT,
*
* - case 1a). the urb of the pdu is not unlinking.
* - normal case
* => just give back the urb
*
* - case 1b). the urb of the pdu is unlinking.
* - usbip.ko will return a reply of the unlinking request.
* => give back the urb now and go to case 2b).
*
* - When vhci_hcd receives RET_UNLINK,
*
* - case 2a). a submit request is still pending in vhci_hcd.
* - urb was really pending in usbip.ko and urb_unlink_urb() was
* completed there.
* => free a pending submit request
* => notify unlink completeness by giving back the urb
*
* - case 2b). a submit request is *not* pending in vhci_hcd.
* - urb was already given back to the core driver.
* => do not give back the urb
*
*
* SERVER SIDE
*
* - When usbip receives CMD_UNLINK,
*
* - case 3a). the urb of the unlink request is now in submission.
* => do usb_unlink_urb().
* => after the unlink is completed, send RET_UNLINK.
*
* - case 3b). the urb of the unlink request is not in submission.
* - may be already completed or never be received
* => send RET_UNLINK
*
*/
static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
{
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
struct vhci_hcd *vhci = hcd_to_vhci(hcd);
struct vhci_priv *priv;
struct vhci_device *vdev;
unsigned long flags;
pr_info("dequeue a urb %p\n", urb);
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
spin_lock_irqsave(&vhci->lock, flags);
priv = urb->hcpriv;
if (!priv) {
/* URB was never linked! or will be soon given back by
* vhci_rx. */
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
spin_unlock_irqrestore(&vhci->lock, flags);
return -EIDRM;
}
{
int ret = 0;
ret = usb_hcd_check_unlink_urb(hcd, urb, status);
if (ret) {
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
spin_unlock_irqrestore(&vhci->lock, flags);
return ret;
}
}
/* send unlink request here? */
vdev = priv->vdev;
if (!vdev->ud.tcp_socket) {
/* tcp connection is closed */
spin_lock(&vdev->priv_lock);
pr_info("device %p seems to be disconnected\n", vdev);
list_del(&priv->list);
kfree(priv);
urb->hcpriv = NULL;
spin_unlock(&vdev->priv_lock);
/*
* If tcp connection is alive, we have sent CMD_UNLINK.
* vhci_rx will receive RET_UNLINK and give back the URB.
* Otherwise, we give back it here.
*/
pr_info("gives back urb %p\n", urb);
usb_hcd_unlink_urb_from_ep(hcd, urb);
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
spin_unlock_irqrestore(&vhci->lock, flags);
usb_hcd_giveback_urb(vhci_to_hcd(vhci), urb, urb->status);
spin_lock_irqsave(&vhci->lock, flags);
} else {
/* tcp connection is alive */
struct vhci_unlink *unlink;
spin_lock(&vdev->priv_lock);
/* setup CMD_UNLINK pdu */
unlink = kzalloc(sizeof(struct vhci_unlink), GFP_ATOMIC);
if (!unlink) {
spin_unlock(&vdev->priv_lock);
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
spin_unlock_irqrestore(&vhci->lock, flags);
usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC);
return -ENOMEM;
}
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
unlink->seqnum = atomic_inc_return(&vhci->seqnum);
if (unlink->seqnum == 0xffff)
pr_info("seqnum max\n");
unlink->unlink_seqnum = priv->seqnum;
pr_info("device %p seems to be still connected\n", vdev);
/* send cmd_unlink and try to cancel the pending URB in the
* peer */
list_add_tail(&unlink->list, &vdev->unlink_tx);
wake_up(&vdev->waitq_tx);
spin_unlock(&vdev->priv_lock);
}
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
spin_unlock_irqrestore(&vhci->lock, flags);
usbip_dbg_vhci_hc("leave\n");
return 0;
}
static void vhci_device_unlink_cleanup(struct vhci_device *vdev)
{
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
struct vhci_hcd *vhci = vdev_to_vhci(vdev);
struct usb_hcd *hcd = vhci_to_hcd(vhci);
struct vhci_unlink *unlink, *tmp;
unsigned long flags;
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
spin_lock_irqsave(&vhci->lock, flags);
spin_lock(&vdev->priv_lock);
list_for_each_entry_safe(unlink, tmp, &vdev->unlink_tx, list) {
pr_info("unlink cleanup tx %lu\n", unlink->unlink_seqnum);
list_del(&unlink->list);
kfree(unlink);
}
while (!list_empty(&vdev->unlink_rx)) {
struct urb *urb;
unlink = list_first_entry(&vdev->unlink_rx, struct vhci_unlink,
list);
/* give back URB of unanswered unlink request */
pr_info("unlink cleanup rx %lu\n", unlink->unlink_seqnum);
urb = pickup_urb_and_free_priv(vdev, unlink->unlink_seqnum);
if (!urb) {
pr_info("the urb (seqnum %lu) was already given back\n",
unlink->unlink_seqnum);
list_del(&unlink->list);
kfree(unlink);
continue;
}
urb->status = -ENODEV;
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
usb_hcd_unlink_urb_from_ep(hcd, urb);
list_del(&unlink->list);
spin_unlock(&vdev->priv_lock);
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
spin_unlock_irqrestore(&vhci->lock, flags);
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
usb_hcd_giveback_urb(hcd, urb, urb->status);
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
spin_lock_irqsave(&vhci->lock, flags);
spin_lock(&vdev->priv_lock);
kfree(unlink);
}
spin_unlock(&vdev->priv_lock);
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
spin_unlock_irqrestore(&vhci->lock, flags);
}
/*
* The important thing is that only one context begins cleanup.
* This is why error handling and cleanup become simple.
* We do not want to consider race condition as possible.
*/
static void vhci_shutdown_connection(struct usbip_device *ud)
{
struct vhci_device *vdev = container_of(ud, struct vhci_device, ud);
/* need this? see stub_dev.c */
if (ud->tcp_socket) {
pr_debug("shutdown tcp_socket %p\n", ud->tcp_socket);
kernel_sock_shutdown(ud->tcp_socket, SHUT_RDWR);
}
/* kill threads related to this sdev */
staging: usbip: vhci_hcd: Fixed oops during removal of vhci_hcd In response to "usbip detach -p [port_number]" user command,vhci_shutdown_connection() gets executed which kills tcp_tx,tcp_rx kernel threads but doesn't set thread pointers to NULL. so, at the time of vhci_hcd removal vhci_shutdown_connection() again tries to kill kernel threads which are already killed. [ 312.220259] BUG: unable to handle kernel NULL pointer dereference at (null) [ 312.220313] IP: [<ffffffff8108186f>] exit_creds+0x1f/0x70 [ 312.220349] PGD 5b7be067 PUD 5b7dc067 PMD 0 [ 312.220388] Oops: 0000 [#1] SMP [ 312.220415] Modules linked in: vhci_hcd(O-) usbip_host(O) usbip_core(O) uas usb_storage joydev parport_pc bnep rfcomm ppdev binfmt_misc snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi arc4 snd_rawmidi snd_seq_midi_event snd_seq ath9k mac80211 ath9k_common ath9k_hw snd_timer snd_seq_device snd ath i915 drm_kms_helper drm psmouse cfg80211 coretemp soundcore lpc_ich i2c_algo_bit snd_page_alloc video intel_ips wmi btusb mac_hid bluetooth ideapad_laptop lp sparse_keymap serio_raw mei microcode parport r8169 [ 312.220862] CPU 0 [ 312.220882] Pid: 2095, comm: usbip_eh Tainted: G O 3.6.0-rc3+ #2 LENOVO 20042 /Base Board Product Name [ 312.220938] RIP: 0010:[<ffffffff8108186f>] [<ffffffff8108186f>] exit_creds+0x1f/0x70 [ 312.220979] RSP: 0018:ffff88004d6ebdb0 EFLAGS: 00010282 [ 312.221008] RAX: 0000000000000000 RBX: ffff880041c4db40 RCX: ffff88005ad52230 [ 312.221041] RDX: 0000000000000034 RSI: 0000000000000286 RDI: 0000000000000000 [ 312.221074] RBP: ffff88004d6ebdc0 R08: ffff88004d6ea000 R09: 0000000000000000 [ 312.221107] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 [ 312.221144] R13: 0000000000000000 R14: ffff88005ad521d8 R15: ffff88004d6ebea0 [ 312.221177] FS: 0000000000000000(0000) GS:ffff880077400000(0000) knlGS:0000000000000000 [ 312.221214] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 312.221241] CR2: 0000000000000000 CR3: 000000005b7b9000 CR4: 00000000000007f0 [ 312.221277] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 312.221309] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 312.221342] Process usbip_eh (pid: 2095, threadinfo ffff88004d6ea000, task ffff88004d44db40) [ 312.221384] Stack: [ 312.221396] ffff88004d6ebdc0 ffff880041c4db40 ffff88004d6ebde0 ffffffff81052aaa [ 312.221442] ffff880041c4db40 0000000000000000 ffff88004d6ebe10 ffffffff8107a148 [ 312.221487] ffff88005ad521f0 ffff88005ad52228 ffff88004d44db40 ffff88005ad521d8 [ 312.221536] Call Trace: [ 312.221556] [<ffffffff81052aaa>] __put_task_struct+0x4a/0x140 [ 312.221587] [<ffffffff8107a148>] kthread_stop+0x108/0x110 [ 312.221616] [<ffffffffa0412569>] vhci_shutdown_connection+0x49/0x2b4 [vhci_hcd] [ 312.221657] [<ffffffffa0139920>] event_handler_loop+0x70/0x140 [usbip_core] [ 312.221692] [<ffffffff8107ad30>] ? add_wait_queue+0x60/0x60 [ 312.221721] [<ffffffffa01398b0>] ? usbip_stop_eh+0x30/0x30 [usbip_core] [ 312.221754] [<ffffffff8107a453>] kthread+0x93/0xa0 [ 312.221784] [<ffffffff81670e84>] kernel_thread_helper+0x4/0x10 [ 312.221814] [<ffffffff8107a3c0>] ? flush_kthread_worker+0xb0/0xb0 [ 312.223589] [<ffffffff81670e80>] ? gs_change+0x13/0x13 [ 312.225360] Code: 0b 0f 0b 66 0f 1f 84 00 00 00 00 00 55 48 89 e5 53 48 83 ec 08 66 66 66 66 90 48 8b 87 58 04 00 00 48 89 fb 48 8b bf 50 04 00 00 <8b> 00 48 c7 83 50 04 00 00 00 00 00 00 f0 ff 0f 0f 94 c0 84 c0 [ 312.229663] RIP [<ffffffff8108186f>] exit_creds+0x1f/0x70 [ 312.231696] RSP <ffff88004d6ebdb0> [ 312.233648] CR2: 0000000000000000 [ 312.256464] ---[ end trace 1971ce612a167279 ]--- Signed-off-by: navin patidar <navinp@cdac.in> Acked-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-19 18:34:51 +07:00
if (vdev->ud.tcp_rx) {
kthread_stop_put(vdev->ud.tcp_rx);
staging: usbip: vhci_hcd: Fixed oops during removal of vhci_hcd In response to "usbip detach -p [port_number]" user command,vhci_shutdown_connection() gets executed which kills tcp_tx,tcp_rx kernel threads but doesn't set thread pointers to NULL. so, at the time of vhci_hcd removal vhci_shutdown_connection() again tries to kill kernel threads which are already killed. [ 312.220259] BUG: unable to handle kernel NULL pointer dereference at (null) [ 312.220313] IP: [<ffffffff8108186f>] exit_creds+0x1f/0x70 [ 312.220349] PGD 5b7be067 PUD 5b7dc067 PMD 0 [ 312.220388] Oops: 0000 [#1] SMP [ 312.220415] Modules linked in: vhci_hcd(O-) usbip_host(O) usbip_core(O) uas usb_storage joydev parport_pc bnep rfcomm ppdev binfmt_misc snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi arc4 snd_rawmidi snd_seq_midi_event snd_seq ath9k mac80211 ath9k_common ath9k_hw snd_timer snd_seq_device snd ath i915 drm_kms_helper drm psmouse cfg80211 coretemp soundcore lpc_ich i2c_algo_bit snd_page_alloc video intel_ips wmi btusb mac_hid bluetooth ideapad_laptop lp sparse_keymap serio_raw mei microcode parport r8169 [ 312.220862] CPU 0 [ 312.220882] Pid: 2095, comm: usbip_eh Tainted: G O 3.6.0-rc3+ #2 LENOVO 20042 /Base Board Product Name [ 312.220938] RIP: 0010:[<ffffffff8108186f>] [<ffffffff8108186f>] exit_creds+0x1f/0x70 [ 312.220979] RSP: 0018:ffff88004d6ebdb0 EFLAGS: 00010282 [ 312.221008] RAX: 0000000000000000 RBX: ffff880041c4db40 RCX: ffff88005ad52230 [ 312.221041] RDX: 0000000000000034 RSI: 0000000000000286 RDI: 0000000000000000 [ 312.221074] RBP: ffff88004d6ebdc0 R08: ffff88004d6ea000 R09: 0000000000000000 [ 312.221107] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 [ 312.221144] R13: 0000000000000000 R14: ffff88005ad521d8 R15: ffff88004d6ebea0 [ 312.221177] FS: 0000000000000000(0000) GS:ffff880077400000(0000) knlGS:0000000000000000 [ 312.221214] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 312.221241] CR2: 0000000000000000 CR3: 000000005b7b9000 CR4: 00000000000007f0 [ 312.221277] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 312.221309] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 312.221342] Process usbip_eh (pid: 2095, threadinfo ffff88004d6ea000, task ffff88004d44db40) [ 312.221384] Stack: [ 312.221396] ffff88004d6ebdc0 ffff880041c4db40 ffff88004d6ebde0 ffffffff81052aaa [ 312.221442] ffff880041c4db40 0000000000000000 ffff88004d6ebe10 ffffffff8107a148 [ 312.221487] ffff88005ad521f0 ffff88005ad52228 ffff88004d44db40 ffff88005ad521d8 [ 312.221536] Call Trace: [ 312.221556] [<ffffffff81052aaa>] __put_task_struct+0x4a/0x140 [ 312.221587] [<ffffffff8107a148>] kthread_stop+0x108/0x110 [ 312.221616] [<ffffffffa0412569>] vhci_shutdown_connection+0x49/0x2b4 [vhci_hcd] [ 312.221657] [<ffffffffa0139920>] event_handler_loop+0x70/0x140 [usbip_core] [ 312.221692] [<ffffffff8107ad30>] ? add_wait_queue+0x60/0x60 [ 312.221721] [<ffffffffa01398b0>] ? usbip_stop_eh+0x30/0x30 [usbip_core] [ 312.221754] [<ffffffff8107a453>] kthread+0x93/0xa0 [ 312.221784] [<ffffffff81670e84>] kernel_thread_helper+0x4/0x10 [ 312.221814] [<ffffffff8107a3c0>] ? flush_kthread_worker+0xb0/0xb0 [ 312.223589] [<ffffffff81670e80>] ? gs_change+0x13/0x13 [ 312.225360] Code: 0b 0f 0b 66 0f 1f 84 00 00 00 00 00 55 48 89 e5 53 48 83 ec 08 66 66 66 66 90 48 8b 87 58 04 00 00 48 89 fb 48 8b bf 50 04 00 00 <8b> 00 48 c7 83 50 04 00 00 00 00 00 00 f0 ff 0f 0f 94 c0 84 c0 [ 312.229663] RIP [<ffffffff8108186f>] exit_creds+0x1f/0x70 [ 312.231696] RSP <ffff88004d6ebdb0> [ 312.233648] CR2: 0000000000000000 [ 312.256464] ---[ end trace 1971ce612a167279 ]--- Signed-off-by: navin patidar <navinp@cdac.in> Acked-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-19 18:34:51 +07:00
vdev->ud.tcp_rx = NULL;
}
if (vdev->ud.tcp_tx) {
kthread_stop_put(vdev->ud.tcp_tx);
staging: usbip: vhci_hcd: Fixed oops during removal of vhci_hcd In response to "usbip detach -p [port_number]" user command,vhci_shutdown_connection() gets executed which kills tcp_tx,tcp_rx kernel threads but doesn't set thread pointers to NULL. so, at the time of vhci_hcd removal vhci_shutdown_connection() again tries to kill kernel threads which are already killed. [ 312.220259] BUG: unable to handle kernel NULL pointer dereference at (null) [ 312.220313] IP: [<ffffffff8108186f>] exit_creds+0x1f/0x70 [ 312.220349] PGD 5b7be067 PUD 5b7dc067 PMD 0 [ 312.220388] Oops: 0000 [#1] SMP [ 312.220415] Modules linked in: vhci_hcd(O-) usbip_host(O) usbip_core(O) uas usb_storage joydev parport_pc bnep rfcomm ppdev binfmt_misc snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi arc4 snd_rawmidi snd_seq_midi_event snd_seq ath9k mac80211 ath9k_common ath9k_hw snd_timer snd_seq_device snd ath i915 drm_kms_helper drm psmouse cfg80211 coretemp soundcore lpc_ich i2c_algo_bit snd_page_alloc video intel_ips wmi btusb mac_hid bluetooth ideapad_laptop lp sparse_keymap serio_raw mei microcode parport r8169 [ 312.220862] CPU 0 [ 312.220882] Pid: 2095, comm: usbip_eh Tainted: G O 3.6.0-rc3+ #2 LENOVO 20042 /Base Board Product Name [ 312.220938] RIP: 0010:[<ffffffff8108186f>] [<ffffffff8108186f>] exit_creds+0x1f/0x70 [ 312.220979] RSP: 0018:ffff88004d6ebdb0 EFLAGS: 00010282 [ 312.221008] RAX: 0000000000000000 RBX: ffff880041c4db40 RCX: ffff88005ad52230 [ 312.221041] RDX: 0000000000000034 RSI: 0000000000000286 RDI: 0000000000000000 [ 312.221074] RBP: ffff88004d6ebdc0 R08: ffff88004d6ea000 R09: 0000000000000000 [ 312.221107] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 [ 312.221144] R13: 0000000000000000 R14: ffff88005ad521d8 R15: ffff88004d6ebea0 [ 312.221177] FS: 0000000000000000(0000) GS:ffff880077400000(0000) knlGS:0000000000000000 [ 312.221214] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 312.221241] CR2: 0000000000000000 CR3: 000000005b7b9000 CR4: 00000000000007f0 [ 312.221277] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 312.221309] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 312.221342] Process usbip_eh (pid: 2095, threadinfo ffff88004d6ea000, task ffff88004d44db40) [ 312.221384] Stack: [ 312.221396] ffff88004d6ebdc0 ffff880041c4db40 ffff88004d6ebde0 ffffffff81052aaa [ 312.221442] ffff880041c4db40 0000000000000000 ffff88004d6ebe10 ffffffff8107a148 [ 312.221487] ffff88005ad521f0 ffff88005ad52228 ffff88004d44db40 ffff88005ad521d8 [ 312.221536] Call Trace: [ 312.221556] [<ffffffff81052aaa>] __put_task_struct+0x4a/0x140 [ 312.221587] [<ffffffff8107a148>] kthread_stop+0x108/0x110 [ 312.221616] [<ffffffffa0412569>] vhci_shutdown_connection+0x49/0x2b4 [vhci_hcd] [ 312.221657] [<ffffffffa0139920>] event_handler_loop+0x70/0x140 [usbip_core] [ 312.221692] [<ffffffff8107ad30>] ? add_wait_queue+0x60/0x60 [ 312.221721] [<ffffffffa01398b0>] ? usbip_stop_eh+0x30/0x30 [usbip_core] [ 312.221754] [<ffffffff8107a453>] kthread+0x93/0xa0 [ 312.221784] [<ffffffff81670e84>] kernel_thread_helper+0x4/0x10 [ 312.221814] [<ffffffff8107a3c0>] ? flush_kthread_worker+0xb0/0xb0 [ 312.223589] [<ffffffff81670e80>] ? gs_change+0x13/0x13 [ 312.225360] Code: 0b 0f 0b 66 0f 1f 84 00 00 00 00 00 55 48 89 e5 53 48 83 ec 08 66 66 66 66 90 48 8b 87 58 04 00 00 48 89 fb 48 8b bf 50 04 00 00 <8b> 00 48 c7 83 50 04 00 00 00 00 00 00 f0 ff 0f 0f 94 c0 84 c0 [ 312.229663] RIP [<ffffffff8108186f>] exit_creds+0x1f/0x70 [ 312.231696] RSP <ffff88004d6ebdb0> [ 312.233648] CR2: 0000000000000000 [ 312.256464] ---[ end trace 1971ce612a167279 ]--- Signed-off-by: navin patidar <navinp@cdac.in> Acked-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-19 18:34:51 +07:00
vdev->ud.tcp_tx = NULL;
}
pr_info("stop threads\n");
/* active connection is closed */
if (vdev->ud.tcp_socket) {
sockfd_put(vdev->ud.tcp_socket);
vdev->ud.tcp_socket = NULL;
}
pr_info("release socket\n");
vhci_device_unlink_cleanup(vdev);
/*
* rh_port_disconnect() is a trigger of ...
* usb_disable_device():
* disable all the endpoints for a USB device.
* usb_disable_endpoint():
* disable endpoints. pending urbs are unlinked(dequeued).
*
* NOTE: After calling rh_port_disconnect(), the USB device drivers of a
* detached device should release used urbs in a cleanup function (i.e.
* xxx_disconnect()). Therefore, vhci_hcd does not need to release
* pushed urbs and their private data in this function.
*
* NOTE: vhci_dequeue() must be considered carefully. When shutting down
* a connection, vhci_shutdown_connection() expects vhci_dequeue()
* gives back pushed urbs and frees their private data by request of
* the cleanup function of a USB driver. When unlinking a urb with an
* active connection, vhci_dequeue() does not give back the urb which
* is actually given back by vhci_rx after receiving its return pdu.
*
*/
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
rh_port_disconnect(vdev);
pr_info("disconnect device\n");
}
static void vhci_device_reset(struct usbip_device *ud)
{
struct vhci_device *vdev = container_of(ud, struct vhci_device, ud);
unsigned long flags;
spin_lock_irqsave(&ud->lock, flags);
vdev->speed = 0;
vdev->devid = 0;
usb_put_dev(vdev->udev);
staging: usbip: vhci: update reference count for usb_device This fixes an oops observed when reading status during removal of a device: [ 1706.648285] general protection fault: 0000 [#1] SMP [ 1706.648294] last sysfs file: /sys/devices/platform/vhci_hcd/status [ 1706.648297] CPU 1 [ 1706.648300] Modules linked in: binfmt_misc microcode fuse loop vhci_hcd(N) usbip(N) usbcore usbip_common_mod(N) rtc_core rtc_lib joydev dm_mirror dm_region_hash dm_log linear dm_snapshot xennet dm_mod ext3 mbcache jbd processor thermal_sys hwmon xenblk cdrom [ 1706.648324] Supported: Yes [ 1706.648327] Pid: 10422, comm: usbip Tainted: G N 2.6.32.12-0.7-xen #1 [ 1706.648330] RIP: e030:[<ffffffff801b10d5>] [<ffffffff801b10d5>] strnlen+0x5/0x40 [ 1706.648340] RSP: e02b:ffff8800a994dd30 EFLAGS: 00010286 [ 1706.648343] RAX: ffffffff80481ec1 RBX: 0000000000000000 RCX: 0000000000000002 [ 1706.648347] RDX: 00200d1d4f1c001c RSI: ffffffffffffffff RDI: 00200d1d4f1c001c [ 1706.648350] RBP: ffff880129a1c0aa R08: ffffffffa01901c4 R09: 0000000000000006 [ 1706.648353] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800a9a1c0ab [ 1706.648357] R13: 00200d1d4f1c001c R14: 00000000ffffffff R15: ffff880129a1c0aa [ 1706.648363] FS: 00007f2f2e9ca700(0000) GS:ffff880001018000(0000) knlGS:0000000000000000 [ 1706.648367] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1706.648370] CR2: 000000000071b048 CR3: 00000000b4b68000 CR4: 0000000000002660 [ 1706.648374] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1706.648378] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 1706.648381] Process usbip (pid: 10422, threadinfo ffff8800a994c000, task ffff88007b170200) [ 1706.648385] Stack: [ 1706.648387] ffffffff801b28c9 0000000000000002 ffffffffa01901c4 ffff8800a9a1c0ab [ 1706.648391] <0> ffffffffa01901c6 ffff8800a994de08 ffffffff801b339b 0000000000000004 [ 1706.648397] <0> 0000000affffffff ffffffffffffffff 00000000000067c0 0000000000000000 [ 1706.648404] Call Trace: [ 1706.648413] [<ffffffff801b28c9>] string+0x39/0xe0 [ 1706.648419] [<ffffffff801b339b>] vsnprintf+0x1eb/0x620 [ 1706.648423] [<ffffffff801b3813>] sprintf+0x43/0x50 [ 1706.648429] [<ffffffffa018d719>] show_status+0x1b9/0x220 [vhci_hcd] [ 1706.648438] [<ffffffff8024a2b7>] dev_attr_show+0x27/0x60 [ 1706.648445] [<ffffffff80144821>] sysfs_read_file+0x101/0x1d0 [ 1706.648451] [<ffffffff800da4a7>] vfs_read+0xc7/0x130 [ 1706.648457] [<ffffffff800da613>] sys_read+0x53/0xa0 [ 1706.648462] [<ffffffff80007458>] system_call_fastpath+0x16/0x1b [ 1706.648468] [<00007f2f2de40f30>] 0x7f2f2de40f30 [ 1706.648470] Code: 66 0f 1f 44 00 00 48 83 c2 01 80 3a 00 75 f7 48 89 d0 48 29 f8 f3 c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 48 85 f6 74 29 <80> 3f 00 74 24 48 8d 56 ff 48 89 f8 eb 0e 0f 1f 44 00 00 48 83 [ 1706.648507] RIP [<ffffffff801b10d5>] strnlen+0x5/0x40 [ 1706.648511] RSP <ffff8800a994dd30> [ 1706.649575] ---[ end trace b4eb72bf2e149593 ]--- Signed-off-by: Max Vozeler <max@vozeler.com> Tested-by: Mark Wehby <MWehby@luxotticaRetail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-12 20:02:00 +07:00
vdev->udev = NULL;
if (ud->tcp_socket) {
sockfd_put(ud->tcp_socket);
ud->tcp_socket = NULL;
}
ud->status = VDEV_ST_NULL;
spin_unlock_irqrestore(&ud->lock, flags);
}
static void vhci_device_unusable(struct usbip_device *ud)
{
unsigned long flags;
spin_lock_irqsave(&ud->lock, flags);
ud->status = VDEV_ST_ERROR;
spin_unlock_irqrestore(&ud->lock, flags);
}
static void vhci_device_init(struct vhci_device *vdev)
{
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
memset(vdev, 0, sizeof(struct vhci_device));
vdev->ud.side = USBIP_VHCI;
vdev->ud.status = VDEV_ST_NULL;
spin_lock_init(&vdev->ud.lock);
INIT_LIST_HEAD(&vdev->priv_rx);
INIT_LIST_HEAD(&vdev->priv_tx);
INIT_LIST_HEAD(&vdev->unlink_tx);
INIT_LIST_HEAD(&vdev->unlink_rx);
spin_lock_init(&vdev->priv_lock);
init_waitqueue_head(&vdev->waitq_tx);
vdev->ud.eh_ops.shutdown = vhci_shutdown_connection;
vdev->ud.eh_ops.reset = vhci_device_reset;
vdev->ud.eh_ops.unusable = vhci_device_unusable;
usbip_start_eh(&vdev->ud);
}
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
static int hcd_name_to_id(const char *name)
{
char *c;
long val;
int ret;
c = strchr(name, '.');
if (c == NULL)
return 0;
ret = kstrtol(c+1, 10, &val);
if (ret < 0)
return ret;
return val;
}
static int vhci_start(struct usb_hcd *hcd)
{
struct vhci_hcd *vhci = hcd_to_vhci(hcd);
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
int id, rhport;
int err = 0;
usbip_dbg_vhci_hc("enter vhci_start\n");
/* initialize private data of usb_hcd */
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) {
struct vhci_device *vdev = &vhci->vdev[rhport];
vhci_device_init(vdev);
vdev->rhport = rhport;
}
atomic_set(&vhci->seqnum, 0);
spin_lock_init(&vhci->lock);
hcd->power_budget = 0; /* no limit */
hcd->uses_new_polling = 1;
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
id = hcd_name_to_id(hcd_name(hcd));
if (id < 0) {
pr_err("invalid vhci name %s\n", hcd_name(hcd));
return -EINVAL;
}
/* vhci_hcd is now ready to be controlled through sysfs */
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
if (id == 0) {
err = vhci_init_attr_group();
if (err) {
pr_err("init attr group\n");
return err;
}
err = sysfs_create_group(&hcd_dev(hcd)->kobj, &vhci_attr_group);
if (err) {
pr_err("create sysfs files\n");
vhci_finish_attr_group();
return err;
}
pr_info("created sysfs %s\n", hcd_name(hcd));
}
return 0;
}
static void vhci_stop(struct usb_hcd *hcd)
{
struct vhci_hcd *vhci = hcd_to_vhci(hcd);
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
int id, rhport;
usbip_dbg_vhci_hc("stop VHCI controller\n");
/* 1. remove the userland interface of vhci_hcd */
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
id = hcd_name_to_id(hcd_name(hcd));
if (id == 0) {
sysfs_remove_group(&hcd_dev(hcd)->kobj, &vhci_attr_group);
vhci_finish_attr_group();
}
/* 2. shutdown all the ports of vhci_hcd */
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) {
struct vhci_device *vdev = &vhci->vdev[rhport];
usbip_event_add(&vdev->ud, VDEV_EVENT_REMOVED);
usbip_stop_eh(&vdev->ud);
}
}
static int vhci_get_frame_number(struct usb_hcd *hcd)
{
dev_err_ratelimited(&hcd->self.root_hub->dev, "Not yet implemented\n");
return 0;
}
#ifdef CONFIG_PM
/* FIXME: suspend/resume */
static int vhci_bus_suspend(struct usb_hcd *hcd)
{
struct vhci_hcd *vhci = hcd_to_vhci(hcd);
unsigned long flags;
dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__);
spin_lock_irqsave(&vhci->lock, flags);
hcd->state = HC_STATE_SUSPENDED;
spin_unlock_irqrestore(&vhci->lock, flags);
return 0;
}
static int vhci_bus_resume(struct usb_hcd *hcd)
{
struct vhci_hcd *vhci = hcd_to_vhci(hcd);
int rc = 0;
unsigned long flags;
dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__);
spin_lock_irqsave(&vhci->lock, flags);
if (!HCD_HW_ACCESSIBLE(hcd))
rc = -ESHUTDOWN;
else
hcd->state = HC_STATE_RUNNING;
spin_unlock_irqrestore(&vhci->lock, flags);
return rc;
}
#else
#define vhci_bus_suspend NULL
#define vhci_bus_resume NULL
#endif
static struct hc_driver vhci_hc_driver = {
.description = driver_name,
.product_desc = driver_desc,
.hcd_priv_size = sizeof(struct vhci_hcd),
.flags = HCD_USB2,
.start = vhci_start,
.stop = vhci_stop,
.urb_enqueue = vhci_urb_enqueue,
.urb_dequeue = vhci_urb_dequeue,
.get_frame_number = vhci_get_frame_number,
.hub_status_data = vhci_hub_status,
.hub_control = vhci_hub_control,
.bus_suspend = vhci_bus_suspend,
.bus_resume = vhci_bus_resume,
};
static int vhci_hcd_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
int ret;
usbip_dbg_vhci_hc("name %s id %d\n", pdev->name, pdev->id);
/*
* Allocate and initialize hcd.
* Our private data is also allocated automatically.
*/
hcd = usb_create_hcd(&vhci_hc_driver, &pdev->dev, dev_name(&pdev->dev));
if (!hcd) {
pr_err("create hcd failed\n");
return -ENOMEM;
}
hcd->has_tt = 1;
/*
* Finish generic HCD structure initialization and register.
* Call the driver's reset() and start() routines.
*/
ret = usb_add_hcd(hcd, 0, 0);
if (ret != 0) {
pr_err("usb_add_hcd failed %d\n", ret);
usb_put_hcd(hcd);
return ret;
}
usbip_dbg_vhci_hc("bye\n");
return 0;
}
static int vhci_hcd_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd;
hcd = platform_get_drvdata(pdev);
if (!hcd)
return 0;
/*
* Disconnects the root hub,
* then reverses the effects of usb_add_hcd(),
* invoking the HCD's stop() methods.
*/
usb_remove_hcd(hcd);
usb_put_hcd(hcd);
return 0;
}
#ifdef CONFIG_PM
/* what should happen for USB/IP under suspend/resume? */
static int vhci_hcd_suspend(struct platform_device *pdev, pm_message_t state)
{
struct usb_hcd *hcd;
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
struct vhci_hcd *vhci;
int rhport;
int connected = 0;
int ret = 0;
unsigned long flags;
hcd = platform_get_drvdata(pdev);
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
if (!hcd)
return 0;
vhci = hcd_to_vhci(hcd);
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
spin_lock_irqsave(&vhci->lock, flags);
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++)
if (vhci->port_status[rhport] & USB_PORT_STAT_CONNECTION)
connected += 1;
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
spin_unlock_irqrestore(&vhci->lock, flags);
if (connected > 0) {
dev_info(&pdev->dev,
"We have %d active connection%s. Do not suspend.\n",
connected, (connected == 1 ? "" : "s"));
ret = -EBUSY;
} else {
dev_info(&pdev->dev, "suspend vhci_hcd");
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
}
return ret;
}
static int vhci_hcd_resume(struct platform_device *pdev)
{
struct usb_hcd *hcd;
dev_dbg(&pdev->dev, "%s\n", __func__);
hcd = platform_get_drvdata(pdev);
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
if (!hcd)
return 0;
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
usb_hcd_poll_rh_status(hcd);
return 0;
}
#else
#define vhci_hcd_suspend NULL
#define vhci_hcd_resume NULL
#endif
static struct platform_driver vhci_driver = {
.probe = vhci_hcd_probe,
.remove = vhci_hcd_remove,
.suspend = vhci_hcd_suspend,
.resume = vhci_hcd_resume,
.driver = {
.name = driver_name,
},
};
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
static int add_platform_device(int id)
{
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
struct platform_device *pdev;
int dev_nr;
if (id == 0)
dev_nr = -1;
else
dev_nr = id;
pdev = platform_device_register_simple(driver_name, dev_nr, NULL, 0);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
*(vhci_pdevs + id) = pdev;
return 0;
}
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
static void del_platform_devices(void)
{
struct platform_device *pdev;
int i;
for (i = 0; i < vhci_num_controllers; i++) {
pdev = *(vhci_pdevs + i);
if (pdev != NULL)
platform_device_unregister(pdev);
*(vhci_pdevs + i) = NULL;
}
sysfs_remove_link(&platform_bus.kobj, driver_name);
}
static int __init vhci_hcd_init(void)
{
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
int i, ret;
if (usb_disabled())
return -ENODEV;
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
if (vhci_num_controllers < 1)
vhci_num_controllers = 1;
vhci_pdevs = kcalloc(vhci_num_controllers, sizeof(void *), GFP_KERNEL);
if (vhci_pdevs == NULL)
return -ENOMEM;
ret = platform_driver_register(&vhci_driver);
if (ret)
goto err_driver_register;
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
for (i = 0; i < vhci_num_controllers; i++) {
ret = add_platform_device(i);
if (ret)
goto err_platform_device_register;
}
pr_info(DRIVER_DESC " v" USBIP_VERSION "\n");
return ret;
err_platform_device_register:
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
del_platform_devices();
platform_driver_unregister(&vhci_driver);
err_driver_register:
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
kfree(vhci_pdevs);
return ret;
}
static void __exit vhci_hcd_exit(void)
{
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
del_platform_devices();
platform_driver_unregister(&vhci_driver);
usbip: vhci extension: modifications to vhci driver Modification to Kconfig, vhci_hc.c, vhci.h and vhci_sysfs.c. 1. kernel config Followings are added. USBIP_VHCI_HC_PORTS: Number of ports per USB/IP virtual host controller. The default is 8 - same as current VHCI_NPORTS. USBIP_VHCI_NR_HCS: Number of USB/IP virtual host controllers. The default is 1. This paratmeter is replaced with USBIP_VHCI_INIT_HCS and USBIP_VHCI_MAX_HCS included in succeeding dynamic extension patch. 2. the_controller to controllers the_controller is changed to vhci_pdevs: array of struct platform_device. 3. vhci_sysfs.c Sysfs structure is changed as following. BEFORE: /sys/devices/platform +-- vhci +-- status +-- attach +-- detach +-- usbip_debug AFTER: example for CONFIG_USBIP_NR_HCS=4 /sys/devices/platform +-- vhci | +-- nports | +-- status | +-- status.1 | +-- status.2 | +-- status.3 | +-- attach | +-- detach | +-- usbip_debug +-- vhci.1 +-- vhci.2 +-- vhci.3 vhci[.N] is shown for each host controller kobj. vhch.1, vhci.2, ... are shown only when CONFIG_USBIP_NR_HCS is more than 1. Only 'vhci' (without number) has user space interfaces. 'nports' is newly added to give ports-per-controller and number of controlles. Before that, number of ports is acquired by reading status lines. Status is divided for each controller to avoid page size (4KB) limitation. Old userspace tool binaries work with the first status within the first controller. Inconsistency between status header and content is fixed. 4th and 5th column are header: "dev bus" content(unused): "000 000" content(used): "%08x", devid Only 1st and 2nd column are used by program. In old version, sscanf() in parse_status expect no bus column. And bus_id string is shown in the last column. Then bus in the header is removed and unused content is replaced with 8 zeros. The sscanf() expects more than 5 columns and new has 6 columns so there's no compatibility issue in this change. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-13 09:33:40 +07:00
kfree(vhci_pdevs);
}
module_init(vhci_hcd_init);
module_exit(vhci_hcd_exit);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
MODULE_VERSION(USBIP_VERSION);