linux_dsm_epyc7002/net/tls/tls_sw.c

1514 lines
38 KiB
C
Raw Normal View History

/*
* Copyright (c) 2016-2017, Mellanox Technologies. All rights reserved.
* Copyright (c) 2016-2017, Dave Watson <davejwatson@fb.com>. All rights reserved.
* Copyright (c) 2016-2017, Lance Chao <lancerchao@fb.com>. All rights reserved.
* Copyright (c) 2016, Fridolin Pokorny <fridolin.pokorny@gmail.com>. All rights reserved.
* Copyright (c) 2016, Nikos Mavrogiannopoulos <nmav@gnutls.org>. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include <linux/sched/signal.h>
#include <linux/module.h>
#include <crypto/aead.h>
#include <net/strparser.h>
#include <net/tls.h>
#define MAX_IV_SIZE TLS_CIPHER_AES_GCM_128_IV_SIZE
static int __skb_nsg(struct sk_buff *skb, int offset, int len,
unsigned int recursion_level)
{
int start = skb_headlen(skb);
int i, chunk = start - offset;
struct sk_buff *frag_iter;
int elt = 0;
if (unlikely(recursion_level >= 24))
return -EMSGSIZE;
if (chunk > 0) {
if (chunk > len)
chunk = len;
elt++;
len -= chunk;
if (len == 0)
return elt;
offset += chunk;
}
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
int end;
WARN_ON(start > offset + len);
end = start + skb_frag_size(&skb_shinfo(skb)->frags[i]);
chunk = end - offset;
if (chunk > 0) {
if (chunk > len)
chunk = len;
elt++;
len -= chunk;
if (len == 0)
return elt;
offset += chunk;
}
start = end;
}
if (unlikely(skb_has_frag_list(skb))) {
skb_walk_frags(skb, frag_iter) {
int end, ret;
WARN_ON(start > offset + len);
end = start + frag_iter->len;
chunk = end - offset;
if (chunk > 0) {
if (chunk > len)
chunk = len;
ret = __skb_nsg(frag_iter, offset - start, chunk,
recursion_level + 1);
if (unlikely(ret < 0))
return ret;
elt += ret;
len -= chunk;
if (len == 0)
return elt;
offset += chunk;
}
start = end;
}
}
BUG_ON(len);
return elt;
}
/* Return the number of scatterlist elements required to completely map the
* skb, or -EMSGSIZE if the recursion depth is exceeded.
*/
static int skb_nsg(struct sk_buff *skb, int offset, int len)
{
return __skb_nsg(skb, offset, len, 0);
}
net/tls: Add support for async decryption of tls records When tls records are decrypted using asynchronous acclerators such as NXP CAAM engine, the crypto apis return -EINPROGRESS. Presently, on getting -EINPROGRESS, the tls record processing stops till the time the crypto accelerator finishes off and returns the result. This incurs a context switch and is not an efficient way of accessing the crypto accelerators. Crypto accelerators work efficient when they are queued with multiple crypto jobs without having to wait for the previous ones to complete. The patch submits multiple crypto requests without having to wait for for previous ones to complete. This has been implemented for records which are decrypted in zero-copy mode. At the end of recvmsg(), we wait for all the asynchronous decryption requests to complete. The references to records which have been sent for async decryption are dropped. For cases where record decryption is not possible in zero-copy mode, asynchronous decryption is not used and we wait for decryption crypto api to complete. For crypto requests executing in async fashion, the memory for aead_request, sglists and skb etc is freed from the decryption completion handler. The decryption completion handler wakesup the sleeping user context when recvmsg() flags that it has done sending all the decryption requests and there are no more decryption requests pending to be completed. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29 16:56:55 +07:00
static void tls_decrypt_done(struct crypto_async_request *req, int err)
{
struct aead_request *aead_req = (struct aead_request *)req;
struct scatterlist *sgout = aead_req->dst;
tls: async support causes out-of-bounds access in crypto APIs When async support was added it needed to access the sk from the async callback to report errors up the stack. The patch tried to use space after the aead request struct by directly setting the reqsize field in aead_request. This is an internal field that should not be used outside the crypto APIs. It is used by the crypto code to define extra space for private structures used in the crypto context. Users of the API then use crypto_aead_reqsize() and add the returned amount of bytes to the end of the request memory allocation before posting the request to encrypt/decrypt APIs. So this breaks (with general protection fault and KASAN error, if enabled) because the request sent to decrypt is shorter than required causing the crypto API out-of-bounds errors. Also it seems unlikely the sk is even valid by the time it gets to the callback because of memset in crypto layer. Anyways, fix this by holding the sk in the skb->sk field when the callback is set up and because the skb is already passed through to the callback handler via void* we can access it in the handler. Then in the handler we need to be careful to NULL the pointer again before kfree_skb. I added comments on both the setup (in tls_do_decryption) and when we clear it from the crypto callback handler tls_decrypt_done(). After this selftests pass again and fixes KASAN errors/warnings. Fixes: 94524d8fc965 ("net/tls: Add support for async decryption of tls records") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Reviewed-by: Vakul Garg <Vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-15 03:01:46 +07:00
struct tls_sw_context_rx *ctx;
struct tls_context *tls_ctx;
net/tls: Add support for async decryption of tls records When tls records are decrypted using asynchronous acclerators such as NXP CAAM engine, the crypto apis return -EINPROGRESS. Presently, on getting -EINPROGRESS, the tls record processing stops till the time the crypto accelerator finishes off and returns the result. This incurs a context switch and is not an efficient way of accessing the crypto accelerators. Crypto accelerators work efficient when they are queued with multiple crypto jobs without having to wait for the previous ones to complete. The patch submits multiple crypto requests without having to wait for for previous ones to complete. This has been implemented for records which are decrypted in zero-copy mode. At the end of recvmsg(), we wait for all the asynchronous decryption requests to complete. The references to records which have been sent for async decryption are dropped. For cases where record decryption is not possible in zero-copy mode, asynchronous decryption is not used and we wait for decryption crypto api to complete. For crypto requests executing in async fashion, the memory for aead_request, sglists and skb etc is freed from the decryption completion handler. The decryption completion handler wakesup the sleeping user context when recvmsg() flags that it has done sending all the decryption requests and there are no more decryption requests pending to be completed. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29 16:56:55 +07:00
struct scatterlist *sg;
tls: async support causes out-of-bounds access in crypto APIs When async support was added it needed to access the sk from the async callback to report errors up the stack. The patch tried to use space after the aead request struct by directly setting the reqsize field in aead_request. This is an internal field that should not be used outside the crypto APIs. It is used by the crypto code to define extra space for private structures used in the crypto context. Users of the API then use crypto_aead_reqsize() and add the returned amount of bytes to the end of the request memory allocation before posting the request to encrypt/decrypt APIs. So this breaks (with general protection fault and KASAN error, if enabled) because the request sent to decrypt is shorter than required causing the crypto API out-of-bounds errors. Also it seems unlikely the sk is even valid by the time it gets to the callback because of memset in crypto layer. Anyways, fix this by holding the sk in the skb->sk field when the callback is set up and because the skb is already passed through to the callback handler via void* we can access it in the handler. Then in the handler we need to be careful to NULL the pointer again before kfree_skb. I added comments on both the setup (in tls_do_decryption) and when we clear it from the crypto callback handler tls_decrypt_done(). After this selftests pass again and fixes KASAN errors/warnings. Fixes: 94524d8fc965 ("net/tls: Add support for async decryption of tls records") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Reviewed-by: Vakul Garg <Vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-15 03:01:46 +07:00
struct sk_buff *skb;
net/tls: Add support for async decryption of tls records When tls records are decrypted using asynchronous acclerators such as NXP CAAM engine, the crypto apis return -EINPROGRESS. Presently, on getting -EINPROGRESS, the tls record processing stops till the time the crypto accelerator finishes off and returns the result. This incurs a context switch and is not an efficient way of accessing the crypto accelerators. Crypto accelerators work efficient when they are queued with multiple crypto jobs without having to wait for the previous ones to complete. The patch submits multiple crypto requests without having to wait for for previous ones to complete. This has been implemented for records which are decrypted in zero-copy mode. At the end of recvmsg(), we wait for all the asynchronous decryption requests to complete. The references to records which have been sent for async decryption are dropped. For cases where record decryption is not possible in zero-copy mode, asynchronous decryption is not used and we wait for decryption crypto api to complete. For crypto requests executing in async fashion, the memory for aead_request, sglists and skb etc is freed from the decryption completion handler. The decryption completion handler wakesup the sleeping user context when recvmsg() flags that it has done sending all the decryption requests and there are no more decryption requests pending to be completed. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29 16:56:55 +07:00
unsigned int pages;
tls: async support causes out-of-bounds access in crypto APIs When async support was added it needed to access the sk from the async callback to report errors up the stack. The patch tried to use space after the aead request struct by directly setting the reqsize field in aead_request. This is an internal field that should not be used outside the crypto APIs. It is used by the crypto code to define extra space for private structures used in the crypto context. Users of the API then use crypto_aead_reqsize() and add the returned amount of bytes to the end of the request memory allocation before posting the request to encrypt/decrypt APIs. So this breaks (with general protection fault and KASAN error, if enabled) because the request sent to decrypt is shorter than required causing the crypto API out-of-bounds errors. Also it seems unlikely the sk is even valid by the time it gets to the callback because of memset in crypto layer. Anyways, fix this by holding the sk in the skb->sk field when the callback is set up and because the skb is already passed through to the callback handler via void* we can access it in the handler. Then in the handler we need to be careful to NULL the pointer again before kfree_skb. I added comments on both the setup (in tls_do_decryption) and when we clear it from the crypto callback handler tls_decrypt_done(). After this selftests pass again and fixes KASAN errors/warnings. Fixes: 94524d8fc965 ("net/tls: Add support for async decryption of tls records") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Reviewed-by: Vakul Garg <Vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-15 03:01:46 +07:00
int pending;
skb = (struct sk_buff *)req->data;
tls_ctx = tls_get_ctx(skb->sk);
ctx = tls_sw_ctx_rx(tls_ctx);
pending = atomic_dec_return(&ctx->decrypt_pending);
net/tls: Add support for async decryption of tls records When tls records are decrypted using asynchronous acclerators such as NXP CAAM engine, the crypto apis return -EINPROGRESS. Presently, on getting -EINPROGRESS, the tls record processing stops till the time the crypto accelerator finishes off and returns the result. This incurs a context switch and is not an efficient way of accessing the crypto accelerators. Crypto accelerators work efficient when they are queued with multiple crypto jobs without having to wait for the previous ones to complete. The patch submits multiple crypto requests without having to wait for for previous ones to complete. This has been implemented for records which are decrypted in zero-copy mode. At the end of recvmsg(), we wait for all the asynchronous decryption requests to complete. The references to records which have been sent for async decryption are dropped. For cases where record decryption is not possible in zero-copy mode, asynchronous decryption is not used and we wait for decryption crypto api to complete. For crypto requests executing in async fashion, the memory for aead_request, sglists and skb etc is freed from the decryption completion handler. The decryption completion handler wakesup the sleeping user context when recvmsg() flags that it has done sending all the decryption requests and there are no more decryption requests pending to be completed. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29 16:56:55 +07:00
/* Propagate if there was an err */
if (err) {
ctx->async_wait.err = err;
tls: async support causes out-of-bounds access in crypto APIs When async support was added it needed to access the sk from the async callback to report errors up the stack. The patch tried to use space after the aead request struct by directly setting the reqsize field in aead_request. This is an internal field that should not be used outside the crypto APIs. It is used by the crypto code to define extra space for private structures used in the crypto context. Users of the API then use crypto_aead_reqsize() and add the returned amount of bytes to the end of the request memory allocation before posting the request to encrypt/decrypt APIs. So this breaks (with general protection fault and KASAN error, if enabled) because the request sent to decrypt is shorter than required causing the crypto API out-of-bounds errors. Also it seems unlikely the sk is even valid by the time it gets to the callback because of memset in crypto layer. Anyways, fix this by holding the sk in the skb->sk field when the callback is set up and because the skb is already passed through to the callback handler via void* we can access it in the handler. Then in the handler we need to be careful to NULL the pointer again before kfree_skb. I added comments on both the setup (in tls_do_decryption) and when we clear it from the crypto callback handler tls_decrypt_done(). After this selftests pass again and fixes KASAN errors/warnings. Fixes: 94524d8fc965 ("net/tls: Add support for async decryption of tls records") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Reviewed-by: Vakul Garg <Vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-15 03:01:46 +07:00
tls_err_abort(skb->sk, err);
net/tls: Add support for async decryption of tls records When tls records are decrypted using asynchronous acclerators such as NXP CAAM engine, the crypto apis return -EINPROGRESS. Presently, on getting -EINPROGRESS, the tls record processing stops till the time the crypto accelerator finishes off and returns the result. This incurs a context switch and is not an efficient way of accessing the crypto accelerators. Crypto accelerators work efficient when they are queued with multiple crypto jobs without having to wait for the previous ones to complete. The patch submits multiple crypto requests without having to wait for for previous ones to complete. This has been implemented for records which are decrypted in zero-copy mode. At the end of recvmsg(), we wait for all the asynchronous decryption requests to complete. The references to records which have been sent for async decryption are dropped. For cases where record decryption is not possible in zero-copy mode, asynchronous decryption is not used and we wait for decryption crypto api to complete. For crypto requests executing in async fashion, the memory for aead_request, sglists and skb etc is freed from the decryption completion handler. The decryption completion handler wakesup the sleeping user context when recvmsg() flags that it has done sending all the decryption requests and there are no more decryption requests pending to be completed. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29 16:56:55 +07:00
}
tls: async support causes out-of-bounds access in crypto APIs When async support was added it needed to access the sk from the async callback to report errors up the stack. The patch tried to use space after the aead request struct by directly setting the reqsize field in aead_request. This is an internal field that should not be used outside the crypto APIs. It is used by the crypto code to define extra space for private structures used in the crypto context. Users of the API then use crypto_aead_reqsize() and add the returned amount of bytes to the end of the request memory allocation before posting the request to encrypt/decrypt APIs. So this breaks (with general protection fault and KASAN error, if enabled) because the request sent to decrypt is shorter than required causing the crypto API out-of-bounds errors. Also it seems unlikely the sk is even valid by the time it gets to the callback because of memset in crypto layer. Anyways, fix this by holding the sk in the skb->sk field when the callback is set up and because the skb is already passed through to the callback handler via void* we can access it in the handler. Then in the handler we need to be careful to NULL the pointer again before kfree_skb. I added comments on both the setup (in tls_do_decryption) and when we clear it from the crypto callback handler tls_decrypt_done(). After this selftests pass again and fixes KASAN errors/warnings. Fixes: 94524d8fc965 ("net/tls: Add support for async decryption of tls records") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Reviewed-by: Vakul Garg <Vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-15 03:01:46 +07:00
/* After using skb->sk to propagate sk through crypto async callback
* we need to NULL it again.
*/
skb->sk = NULL;
net/tls: Add support for async decryption of tls records When tls records are decrypted using asynchronous acclerators such as NXP CAAM engine, the crypto apis return -EINPROGRESS. Presently, on getting -EINPROGRESS, the tls record processing stops till the time the crypto accelerator finishes off and returns the result. This incurs a context switch and is not an efficient way of accessing the crypto accelerators. Crypto accelerators work efficient when they are queued with multiple crypto jobs without having to wait for the previous ones to complete. The patch submits multiple crypto requests without having to wait for for previous ones to complete. This has been implemented for records which are decrypted in zero-copy mode. At the end of recvmsg(), we wait for all the asynchronous decryption requests to complete. The references to records which have been sent for async decryption are dropped. For cases where record decryption is not possible in zero-copy mode, asynchronous decryption is not used and we wait for decryption crypto api to complete. For crypto requests executing in async fashion, the memory for aead_request, sglists and skb etc is freed from the decryption completion handler. The decryption completion handler wakesup the sleeping user context when recvmsg() flags that it has done sending all the decryption requests and there are no more decryption requests pending to be completed. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29 16:56:55 +07:00
/* Release the skb, pages and memory allocated for crypto req */
tls: async support causes out-of-bounds access in crypto APIs When async support was added it needed to access the sk from the async callback to report errors up the stack. The patch tried to use space after the aead request struct by directly setting the reqsize field in aead_request. This is an internal field that should not be used outside the crypto APIs. It is used by the crypto code to define extra space for private structures used in the crypto context. Users of the API then use crypto_aead_reqsize() and add the returned amount of bytes to the end of the request memory allocation before posting the request to encrypt/decrypt APIs. So this breaks (with general protection fault and KASAN error, if enabled) because the request sent to decrypt is shorter than required causing the crypto API out-of-bounds errors. Also it seems unlikely the sk is even valid by the time it gets to the callback because of memset in crypto layer. Anyways, fix this by holding the sk in the skb->sk field when the callback is set up and because the skb is already passed through to the callback handler via void* we can access it in the handler. Then in the handler we need to be careful to NULL the pointer again before kfree_skb. I added comments on both the setup (in tls_do_decryption) and when we clear it from the crypto callback handler tls_decrypt_done(). After this selftests pass again and fixes KASAN errors/warnings. Fixes: 94524d8fc965 ("net/tls: Add support for async decryption of tls records") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Reviewed-by: Vakul Garg <Vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-15 03:01:46 +07:00
kfree_skb(skb);
net/tls: Add support for async decryption of tls records When tls records are decrypted using asynchronous acclerators such as NXP CAAM engine, the crypto apis return -EINPROGRESS. Presently, on getting -EINPROGRESS, the tls record processing stops till the time the crypto accelerator finishes off and returns the result. This incurs a context switch and is not an efficient way of accessing the crypto accelerators. Crypto accelerators work efficient when they are queued with multiple crypto jobs without having to wait for the previous ones to complete. The patch submits multiple crypto requests without having to wait for for previous ones to complete. This has been implemented for records which are decrypted in zero-copy mode. At the end of recvmsg(), we wait for all the asynchronous decryption requests to complete. The references to records which have been sent for async decryption are dropped. For cases where record decryption is not possible in zero-copy mode, asynchronous decryption is not used and we wait for decryption crypto api to complete. For crypto requests executing in async fashion, the memory for aead_request, sglists and skb etc is freed from the decryption completion handler. The decryption completion handler wakesup the sleeping user context when recvmsg() flags that it has done sending all the decryption requests and there are no more decryption requests pending to be completed. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29 16:56:55 +07:00
/* Skip the first S/G entry as it points to AAD */
for_each_sg(sg_next(sgout), sg, UINT_MAX, pages) {
if (!sg)
break;
put_page(sg_page(sg));
}
kfree(aead_req);
if (!pending && READ_ONCE(ctx->async_notify))
complete(&ctx->async_wait.completion);
}
static int tls_do_decryption(struct sock *sk,
net/tls: Add support for async decryption of tls records When tls records are decrypted using asynchronous acclerators such as NXP CAAM engine, the crypto apis return -EINPROGRESS. Presently, on getting -EINPROGRESS, the tls record processing stops till the time the crypto accelerator finishes off and returns the result. This incurs a context switch and is not an efficient way of accessing the crypto accelerators. Crypto accelerators work efficient when they are queued with multiple crypto jobs without having to wait for the previous ones to complete. The patch submits multiple crypto requests without having to wait for for previous ones to complete. This has been implemented for records which are decrypted in zero-copy mode. At the end of recvmsg(), we wait for all the asynchronous decryption requests to complete. The references to records which have been sent for async decryption are dropped. For cases where record decryption is not possible in zero-copy mode, asynchronous decryption is not used and we wait for decryption crypto api to complete. For crypto requests executing in async fashion, the memory for aead_request, sglists and skb etc is freed from the decryption completion handler. The decryption completion handler wakesup the sleeping user context when recvmsg() flags that it has done sending all the decryption requests and there are no more decryption requests pending to be completed. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29 16:56:55 +07:00
struct sk_buff *skb,
struct scatterlist *sgin,
struct scatterlist *sgout,
char *iv_recv,
size_t data_len,
net/tls: Add support for async decryption of tls records When tls records are decrypted using asynchronous acclerators such as NXP CAAM engine, the crypto apis return -EINPROGRESS. Presently, on getting -EINPROGRESS, the tls record processing stops till the time the crypto accelerator finishes off and returns the result. This incurs a context switch and is not an efficient way of accessing the crypto accelerators. Crypto accelerators work efficient when they are queued with multiple crypto jobs without having to wait for the previous ones to complete. The patch submits multiple crypto requests without having to wait for for previous ones to complete. This has been implemented for records which are decrypted in zero-copy mode. At the end of recvmsg(), we wait for all the asynchronous decryption requests to complete. The references to records which have been sent for async decryption are dropped. For cases where record decryption is not possible in zero-copy mode, asynchronous decryption is not used and we wait for decryption crypto api to complete. For crypto requests executing in async fashion, the memory for aead_request, sglists and skb etc is freed from the decryption completion handler. The decryption completion handler wakesup the sleeping user context when recvmsg() flags that it has done sending all the decryption requests and there are no more decryption requests pending to be completed. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29 16:56:55 +07:00
struct aead_request *aead_req,
bool async)
{
struct tls_context *tls_ctx = tls_get_ctx(sk);
struct tls_sw_context_rx *ctx = tls_sw_ctx_rx(tls_ctx);
int ret;
aead_request_set_tfm(aead_req, ctx->aead_recv);
aead_request_set_ad(aead_req, TLS_AAD_SPACE_SIZE);
aead_request_set_crypt(aead_req, sgin, sgout,
data_len + tls_ctx->rx.tag_size,
(u8 *)iv_recv);
net/tls: Add support for async decryption of tls records When tls records are decrypted using asynchronous acclerators such as NXP CAAM engine, the crypto apis return -EINPROGRESS. Presently, on getting -EINPROGRESS, the tls record processing stops till the time the crypto accelerator finishes off and returns the result. This incurs a context switch and is not an efficient way of accessing the crypto accelerators. Crypto accelerators work efficient when they are queued with multiple crypto jobs without having to wait for the previous ones to complete. The patch submits multiple crypto requests without having to wait for for previous ones to complete. This has been implemented for records which are decrypted in zero-copy mode. At the end of recvmsg(), we wait for all the asynchronous decryption requests to complete. The references to records which have been sent for async decryption are dropped. For cases where record decryption is not possible in zero-copy mode, asynchronous decryption is not used and we wait for decryption crypto api to complete. For crypto requests executing in async fashion, the memory for aead_request, sglists and skb etc is freed from the decryption completion handler. The decryption completion handler wakesup the sleeping user context when recvmsg() flags that it has done sending all the decryption requests and there are no more decryption requests pending to be completed. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29 16:56:55 +07:00
if (async) {
tls: async support causes out-of-bounds access in crypto APIs When async support was added it needed to access the sk from the async callback to report errors up the stack. The patch tried to use space after the aead request struct by directly setting the reqsize field in aead_request. This is an internal field that should not be used outside the crypto APIs. It is used by the crypto code to define extra space for private structures used in the crypto context. Users of the API then use crypto_aead_reqsize() and add the returned amount of bytes to the end of the request memory allocation before posting the request to encrypt/decrypt APIs. So this breaks (with general protection fault and KASAN error, if enabled) because the request sent to decrypt is shorter than required causing the crypto API out-of-bounds errors. Also it seems unlikely the sk is even valid by the time it gets to the callback because of memset in crypto layer. Anyways, fix this by holding the sk in the skb->sk field when the callback is set up and because the skb is already passed through to the callback handler via void* we can access it in the handler. Then in the handler we need to be careful to NULL the pointer again before kfree_skb. I added comments on both the setup (in tls_do_decryption) and when we clear it from the crypto callback handler tls_decrypt_done(). After this selftests pass again and fixes KASAN errors/warnings. Fixes: 94524d8fc965 ("net/tls: Add support for async decryption of tls records") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Reviewed-by: Vakul Garg <Vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-15 03:01:46 +07:00
/* Using skb->sk to push sk through to crypto async callback
* handler. This allows propagating errors up to the socket
* if needed. It _must_ be cleared in the async handler
* before kfree_skb is called. We _know_ skb->sk is NULL
* because it is a clone from strparser.
*/
skb->sk = sk;
net/tls: Add support for async decryption of tls records When tls records are decrypted using asynchronous acclerators such as NXP CAAM engine, the crypto apis return -EINPROGRESS. Presently, on getting -EINPROGRESS, the tls record processing stops till the time the crypto accelerator finishes off and returns the result. This incurs a context switch and is not an efficient way of accessing the crypto accelerators. Crypto accelerators work efficient when they are queued with multiple crypto jobs without having to wait for the previous ones to complete. The patch submits multiple crypto requests without having to wait for for previous ones to complete. This has been implemented for records which are decrypted in zero-copy mode. At the end of recvmsg(), we wait for all the asynchronous decryption requests to complete. The references to records which have been sent for async decryption are dropped. For cases where record decryption is not possible in zero-copy mode, asynchronous decryption is not used and we wait for decryption crypto api to complete. For crypto requests executing in async fashion, the memory for aead_request, sglists and skb etc is freed from the decryption completion handler. The decryption completion handler wakesup the sleeping user context when recvmsg() flags that it has done sending all the decryption requests and there are no more decryption requests pending to be completed. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29 16:56:55 +07:00
aead_request_set_callback(aead_req,
CRYPTO_TFM_REQ_MAY_BACKLOG,
tls_decrypt_done, skb);
atomic_inc(&ctx->decrypt_pending);
} else {
aead_request_set_callback(aead_req,
CRYPTO_TFM_REQ_MAY_BACKLOG,
crypto_req_done, &ctx->async_wait);
}
ret = crypto_aead_decrypt(aead_req);
if (ret == -EINPROGRESS) {
if (async)
return ret;
ret = crypto_wait_req(ret, &ctx->async_wait);
}
if (async)
atomic_dec(&ctx->decrypt_pending);
return ret;
}
static void trim_sg(struct sock *sk, struct scatterlist *sg,
int *sg_num_elem, unsigned int *sg_size, int target_size)
{
int i = *sg_num_elem - 1;
int trim = *sg_size - target_size;
if (trim <= 0) {
WARN_ON(trim < 0);
return;
}
*sg_size = target_size;
while (trim >= sg[i].length) {
trim -= sg[i].length;
sk_mem_uncharge(sk, sg[i].length);
put_page(sg_page(&sg[i]));
i--;
if (i < 0)
goto out;
}
sg[i].length -= trim;
sk_mem_uncharge(sk, trim);
out:
*sg_num_elem = i + 1;
}
static void trim_both_sgl(struct sock *sk, int target_size)
{
struct tls_context *tls_ctx = tls_get_ctx(sk);
struct tls_sw_context_tx *ctx = tls_sw_ctx_tx(tls_ctx);
trim_sg(sk, ctx->sg_plaintext_data,
&ctx->sg_plaintext_num_elem,
&ctx->sg_plaintext_size,
target_size);
if (target_size > 0)
target_size += tls_ctx->tx.overhead_size;
trim_sg(sk, ctx->sg_encrypted_data,
&ctx->sg_encrypted_num_elem,
&ctx->sg_encrypted_size,
target_size);
}
static int alloc_encrypted_sg(struct sock *sk, int len)
{
struct tls_context *tls_ctx = tls_get_ctx(sk);
struct tls_sw_context_tx *ctx = tls_sw_ctx_tx(tls_ctx);
int rc = 0;
rc = sk_alloc_sg(sk, len,
ctx->sg_encrypted_data, 0,
&ctx->sg_encrypted_num_elem,
&ctx->sg_encrypted_size, 0);
if (rc == -ENOSPC)
ctx->sg_encrypted_num_elem = ARRAY_SIZE(ctx->sg_encrypted_data);
return rc;
}
static int alloc_plaintext_sg(struct sock *sk, int len)
{
struct tls_context *tls_ctx = tls_get_ctx(sk);
struct tls_sw_context_tx *ctx = tls_sw_ctx_tx(tls_ctx);
int rc = 0;
rc = sk_alloc_sg(sk, len, ctx->sg_plaintext_data, 0,
&ctx->sg_plaintext_num_elem, &ctx->sg_plaintext_size,
tls_ctx->pending_open_record_frags);
if (rc == -ENOSPC)
ctx->sg_plaintext_num_elem = ARRAY_SIZE(ctx->sg_plaintext_data);
return rc;
}
static void free_sg(struct sock *sk, struct scatterlist *sg,
int *sg_num_elem, unsigned int *sg_size)
{
int i, n = *sg_num_elem;
for (i = 0; i < n; ++i) {
sk_mem_uncharge(sk, sg[i].length);
put_page(sg_page(&sg[i]));
}
*sg_num_elem = 0;
*sg_size = 0;
}
static void tls_free_both_sg(struct sock *sk)
{
struct tls_context *tls_ctx = tls_get_ctx(sk);
struct tls_sw_context_tx *ctx = tls_sw_ctx_tx(tls_ctx);
free_sg(sk, ctx->sg_encrypted_data, &ctx->sg_encrypted_num_elem,
&ctx->sg_encrypted_size);
free_sg(sk, ctx->sg_plaintext_data, &ctx->sg_plaintext_num_elem,
&ctx->sg_plaintext_size);
}
static int tls_do_encryption(struct tls_context *tls_ctx,
tls: fix use-after-free in tls_push_record syzkaller managed to trigger a use-after-free in tls like the following: BUG: KASAN: use-after-free in tls_push_record.constprop.15+0x6a2/0x810 [tls] Write of size 1 at addr ffff88037aa08000 by task a.out/2317 CPU: 3 PID: 2317 Comm: a.out Not tainted 4.17.0+ #144 Hardware name: LENOVO 20FBCTO1WW/20FBCTO1WW, BIOS N1FET47W (1.21 ) 11/28/2016 Call Trace: dump_stack+0x71/0xab print_address_description+0x6a/0x280 kasan_report+0x258/0x380 ? tls_push_record.constprop.15+0x6a2/0x810 [tls] tls_push_record.constprop.15+0x6a2/0x810 [tls] tls_sw_push_pending_record+0x2e/0x40 [tls] tls_sk_proto_close+0x3fe/0x710 [tls] ? tcp_check_oom+0x4c0/0x4c0 ? tls_write_space+0x260/0x260 [tls] ? kmem_cache_free+0x88/0x1f0 inet_release+0xd6/0x1b0 __sock_release+0xc0/0x240 sock_close+0x11/0x20 __fput+0x22d/0x660 task_work_run+0x114/0x1a0 do_exit+0x71a/0x2780 ? mm_update_next_owner+0x650/0x650 ? handle_mm_fault+0x2f5/0x5f0 ? __do_page_fault+0x44f/0xa50 ? mm_fault_error+0x2d0/0x2d0 do_group_exit+0xde/0x300 __x64_sys_exit_group+0x3a/0x50 do_syscall_64+0x9a/0x300 ? page_fault+0x8/0x30 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happened through fault injection where aead_req allocation in tls_do_encryption() eventually failed and we returned -ENOMEM from the function. Turns out that the use-after-free is triggered from tls_sw_sendmsg() in the second tls_push_record(). The error then triggers a jump to waiting for memory in sk_stream_wait_memory() resp. returning immediately in case of MSG_DONTWAIT. What follows is the trim_both_sgl(sk, orig_size), which drops elements from the sg list added via tls_sw_sendmsg(). Now the use-after-free gets triggered when the socket is being closed, where tls_sk_proto_close() callback is invoked. The tls_complete_pending_work() will figure that there's a pending closed tls record to be flushed and thus calls into the tls_push_pending_closed_record() from there. ctx->push_pending_record() is called from the latter, which is the tls_sw_push_pending_record() from sw path. This again calls into tls_push_record(). And here the tls_fill_prepend() will panic since the buffer address has been freed earlier via trim_both_sgl(). One way to fix it is to move the aead request allocation out of tls_do_encryption() early into tls_push_record(). This means we don't prep the tls header and advance state to the TLS_PENDING_CLOSED_RECORD before allocation which could potentially fail happened. That fixes the issue on my side. Fixes: 3c4d7559159b ("tls: kernel TLS support") Reported-by: syzbot+5c74af81c547738e1684@syzkaller.appspotmail.com Reported-by: syzbot+709f2810a6a05f11d4d3@syzkaller.appspotmail.com Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-15 08:07:45 +07:00
struct tls_sw_context_tx *ctx,
struct aead_request *aead_req,
size_t data_len)
{
int rc;
ctx->sg_encrypted_data[0].offset += tls_ctx->tx.prepend_size;
ctx->sg_encrypted_data[0].length -= tls_ctx->tx.prepend_size;
aead_request_set_tfm(aead_req, ctx->aead_send);
aead_request_set_ad(aead_req, TLS_AAD_SPACE_SIZE);
aead_request_set_crypt(aead_req, ctx->sg_aead_in, ctx->sg_aead_out,
data_len, tls_ctx->tx.iv);
aead_request_set_callback(aead_req, CRYPTO_TFM_REQ_MAY_BACKLOG,
crypto_req_done, &ctx->async_wait);
rc = crypto_wait_req(crypto_aead_encrypt(aead_req), &ctx->async_wait);
ctx->sg_encrypted_data[0].offset -= tls_ctx->tx.prepend_size;
ctx->sg_encrypted_data[0].length += tls_ctx->tx.prepend_size;
return rc;
}
static int tls_push_record(struct sock *sk, int flags,
unsigned char record_type)
{
struct tls_context *tls_ctx = tls_get_ctx(sk);
struct tls_sw_context_tx *ctx = tls_sw_ctx_tx(tls_ctx);
tls: fix use-after-free in tls_push_record syzkaller managed to trigger a use-after-free in tls like the following: BUG: KASAN: use-after-free in tls_push_record.constprop.15+0x6a2/0x810 [tls] Write of size 1 at addr ffff88037aa08000 by task a.out/2317 CPU: 3 PID: 2317 Comm: a.out Not tainted 4.17.0+ #144 Hardware name: LENOVO 20FBCTO1WW/20FBCTO1WW, BIOS N1FET47W (1.21 ) 11/28/2016 Call Trace: dump_stack+0x71/0xab print_address_description+0x6a/0x280 kasan_report+0x258/0x380 ? tls_push_record.constprop.15+0x6a2/0x810 [tls] tls_push_record.constprop.15+0x6a2/0x810 [tls] tls_sw_push_pending_record+0x2e/0x40 [tls] tls_sk_proto_close+0x3fe/0x710 [tls] ? tcp_check_oom+0x4c0/0x4c0 ? tls_write_space+0x260/0x260 [tls] ? kmem_cache_free+0x88/0x1f0 inet_release+0xd6/0x1b0 __sock_release+0xc0/0x240 sock_close+0x11/0x20 __fput+0x22d/0x660 task_work_run+0x114/0x1a0 do_exit+0x71a/0x2780 ? mm_update_next_owner+0x650/0x650 ? handle_mm_fault+0x2f5/0x5f0 ? __do_page_fault+0x44f/0xa50 ? mm_fault_error+0x2d0/0x2d0 do_group_exit+0xde/0x300 __x64_sys_exit_group+0x3a/0x50 do_syscall_64+0x9a/0x300 ? page_fault+0x8/0x30 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happened through fault injection where aead_req allocation in tls_do_encryption() eventually failed and we returned -ENOMEM from the function. Turns out that the use-after-free is triggered from tls_sw_sendmsg() in the second tls_push_record(). The error then triggers a jump to waiting for memory in sk_stream_wait_memory() resp. returning immediately in case of MSG_DONTWAIT. What follows is the trim_both_sgl(sk, orig_size), which drops elements from the sg list added via tls_sw_sendmsg(). Now the use-after-free gets triggered when the socket is being closed, where tls_sk_proto_close() callback is invoked. The tls_complete_pending_work() will figure that there's a pending closed tls record to be flushed and thus calls into the tls_push_pending_closed_record() from there. ctx->push_pending_record() is called from the latter, which is the tls_sw_push_pending_record() from sw path. This again calls into tls_push_record(). And here the tls_fill_prepend() will panic since the buffer address has been freed earlier via trim_both_sgl(). One way to fix it is to move the aead request allocation out of tls_do_encryption() early into tls_push_record(). This means we don't prep the tls header and advance state to the TLS_PENDING_CLOSED_RECORD before allocation which could potentially fail happened. That fixes the issue on my side. Fixes: 3c4d7559159b ("tls: kernel TLS support") Reported-by: syzbot+5c74af81c547738e1684@syzkaller.appspotmail.com Reported-by: syzbot+709f2810a6a05f11d4d3@syzkaller.appspotmail.com Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-15 08:07:45 +07:00
struct aead_request *req;
int rc;
req = aead_request_alloc(ctx->aead_send, sk->sk_allocation);
tls: fix use-after-free in tls_push_record syzkaller managed to trigger a use-after-free in tls like the following: BUG: KASAN: use-after-free in tls_push_record.constprop.15+0x6a2/0x810 [tls] Write of size 1 at addr ffff88037aa08000 by task a.out/2317 CPU: 3 PID: 2317 Comm: a.out Not tainted 4.17.0+ #144 Hardware name: LENOVO 20FBCTO1WW/20FBCTO1WW, BIOS N1FET47W (1.21 ) 11/28/2016 Call Trace: dump_stack+0x71/0xab print_address_description+0x6a/0x280 kasan_report+0x258/0x380 ? tls_push_record.constprop.15+0x6a2/0x810 [tls] tls_push_record.constprop.15+0x6a2/0x810 [tls] tls_sw_push_pending_record+0x2e/0x40 [tls] tls_sk_proto_close+0x3fe/0x710 [tls] ? tcp_check_oom+0x4c0/0x4c0 ? tls_write_space+0x260/0x260 [tls] ? kmem_cache_free+0x88/0x1f0 inet_release+0xd6/0x1b0 __sock_release+0xc0/0x240 sock_close+0x11/0x20 __fput+0x22d/0x660 task_work_run+0x114/0x1a0 do_exit+0x71a/0x2780 ? mm_update_next_owner+0x650/0x650 ? handle_mm_fault+0x2f5/0x5f0 ? __do_page_fault+0x44f/0xa50 ? mm_fault_error+0x2d0/0x2d0 do_group_exit+0xde/0x300 __x64_sys_exit_group+0x3a/0x50 do_syscall_64+0x9a/0x300 ? page_fault+0x8/0x30 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happened through fault injection where aead_req allocation in tls_do_encryption() eventually failed and we returned -ENOMEM from the function. Turns out that the use-after-free is triggered from tls_sw_sendmsg() in the second tls_push_record(). The error then triggers a jump to waiting for memory in sk_stream_wait_memory() resp. returning immediately in case of MSG_DONTWAIT. What follows is the trim_both_sgl(sk, orig_size), which drops elements from the sg list added via tls_sw_sendmsg(). Now the use-after-free gets triggered when the socket is being closed, where tls_sk_proto_close() callback is invoked. The tls_complete_pending_work() will figure that there's a pending closed tls record to be flushed and thus calls into the tls_push_pending_closed_record() from there. ctx->push_pending_record() is called from the latter, which is the tls_sw_push_pending_record() from sw path. This again calls into tls_push_record(). And here the tls_fill_prepend() will panic since the buffer address has been freed earlier via trim_both_sgl(). One way to fix it is to move the aead request allocation out of tls_do_encryption() early into tls_push_record(). This means we don't prep the tls header and advance state to the TLS_PENDING_CLOSED_RECORD before allocation which could potentially fail happened. That fixes the issue on my side. Fixes: 3c4d7559159b ("tls: kernel TLS support") Reported-by: syzbot+5c74af81c547738e1684@syzkaller.appspotmail.com Reported-by: syzbot+709f2810a6a05f11d4d3@syzkaller.appspotmail.com Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-15 08:07:45 +07:00
if (!req)
return -ENOMEM;
sg_mark_end(ctx->sg_plaintext_data + ctx->sg_plaintext_num_elem - 1);
sg_mark_end(ctx->sg_encrypted_data + ctx->sg_encrypted_num_elem - 1);
tls_make_aad(ctx->aad_space, ctx->sg_plaintext_size,
tls_ctx->tx.rec_seq, tls_ctx->tx.rec_seq_size,
record_type);
tls_fill_prepend(tls_ctx,
page_address(sg_page(&ctx->sg_encrypted_data[0])) +
ctx->sg_encrypted_data[0].offset,
ctx->sg_plaintext_size, record_type);
tls_ctx->pending_open_record_frags = 0;
set_bit(TLS_PENDING_CLOSED_RECORD, &tls_ctx->flags);
tls: fix use-after-free in tls_push_record syzkaller managed to trigger a use-after-free in tls like the following: BUG: KASAN: use-after-free in tls_push_record.constprop.15+0x6a2/0x810 [tls] Write of size 1 at addr ffff88037aa08000 by task a.out/2317 CPU: 3 PID: 2317 Comm: a.out Not tainted 4.17.0+ #144 Hardware name: LENOVO 20FBCTO1WW/20FBCTO1WW, BIOS N1FET47W (1.21 ) 11/28/2016 Call Trace: dump_stack+0x71/0xab print_address_description+0x6a/0x280 kasan_report+0x258/0x380 ? tls_push_record.constprop.15+0x6a2/0x810 [tls] tls_push_record.constprop.15+0x6a2/0x810 [tls] tls_sw_push_pending_record+0x2e/0x40 [tls] tls_sk_proto_close+0x3fe/0x710 [tls] ? tcp_check_oom+0x4c0/0x4c0 ? tls_write_space+0x260/0x260 [tls] ? kmem_cache_free+0x88/0x1f0 inet_release+0xd6/0x1b0 __sock_release+0xc0/0x240 sock_close+0x11/0x20 __fput+0x22d/0x660 task_work_run+0x114/0x1a0 do_exit+0x71a/0x2780 ? mm_update_next_owner+0x650/0x650 ? handle_mm_fault+0x2f5/0x5f0 ? __do_page_fault+0x44f/0xa50 ? mm_fault_error+0x2d0/0x2d0 do_group_exit+0xde/0x300 __x64_sys_exit_group+0x3a/0x50 do_syscall_64+0x9a/0x300 ? page_fault+0x8/0x30 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happened through fault injection where aead_req allocation in tls_do_encryption() eventually failed and we returned -ENOMEM from the function. Turns out that the use-after-free is triggered from tls_sw_sendmsg() in the second tls_push_record(). The error then triggers a jump to waiting for memory in sk_stream_wait_memory() resp. returning immediately in case of MSG_DONTWAIT. What follows is the trim_both_sgl(sk, orig_size), which drops elements from the sg list added via tls_sw_sendmsg(). Now the use-after-free gets triggered when the socket is being closed, where tls_sk_proto_close() callback is invoked. The tls_complete_pending_work() will figure that there's a pending closed tls record to be flushed and thus calls into the tls_push_pending_closed_record() from there. ctx->push_pending_record() is called from the latter, which is the tls_sw_push_pending_record() from sw path. This again calls into tls_push_record(). And here the tls_fill_prepend() will panic since the buffer address has been freed earlier via trim_both_sgl(). One way to fix it is to move the aead request allocation out of tls_do_encryption() early into tls_push_record(). This means we don't prep the tls header and advance state to the TLS_PENDING_CLOSED_RECORD before allocation which could potentially fail happened. That fixes the issue on my side. Fixes: 3c4d7559159b ("tls: kernel TLS support") Reported-by: syzbot+5c74af81c547738e1684@syzkaller.appspotmail.com Reported-by: syzbot+709f2810a6a05f11d4d3@syzkaller.appspotmail.com Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-15 08:07:45 +07:00
rc = tls_do_encryption(tls_ctx, ctx, req, ctx->sg_plaintext_size);
if (rc < 0) {
/* If we are called from write_space and
* we fail, we need to set this SOCK_NOSPACE
* to trigger another write_space in the future.
*/
set_bit(SOCK_NOSPACE, &sk->sk_socket->flags);
tls: fix use-after-free in tls_push_record syzkaller managed to trigger a use-after-free in tls like the following: BUG: KASAN: use-after-free in tls_push_record.constprop.15+0x6a2/0x810 [tls] Write of size 1 at addr ffff88037aa08000 by task a.out/2317 CPU: 3 PID: 2317 Comm: a.out Not tainted 4.17.0+ #144 Hardware name: LENOVO 20FBCTO1WW/20FBCTO1WW, BIOS N1FET47W (1.21 ) 11/28/2016 Call Trace: dump_stack+0x71/0xab print_address_description+0x6a/0x280 kasan_report+0x258/0x380 ? tls_push_record.constprop.15+0x6a2/0x810 [tls] tls_push_record.constprop.15+0x6a2/0x810 [tls] tls_sw_push_pending_record+0x2e/0x40 [tls] tls_sk_proto_close+0x3fe/0x710 [tls] ? tcp_check_oom+0x4c0/0x4c0 ? tls_write_space+0x260/0x260 [tls] ? kmem_cache_free+0x88/0x1f0 inet_release+0xd6/0x1b0 __sock_release+0xc0/0x240 sock_close+0x11/0x20 __fput+0x22d/0x660 task_work_run+0x114/0x1a0 do_exit+0x71a/0x2780 ? mm_update_next_owner+0x650/0x650 ? handle_mm_fault+0x2f5/0x5f0 ? __do_page_fault+0x44f/0xa50 ? mm_fault_error+0x2d0/0x2d0 do_group_exit+0xde/0x300 __x64_sys_exit_group+0x3a/0x50 do_syscall_64+0x9a/0x300 ? page_fault+0x8/0x30 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happened through fault injection where aead_req allocation in tls_do_encryption() eventually failed and we returned -ENOMEM from the function. Turns out that the use-after-free is triggered from tls_sw_sendmsg() in the second tls_push_record(). The error then triggers a jump to waiting for memory in sk_stream_wait_memory() resp. returning immediately in case of MSG_DONTWAIT. What follows is the trim_both_sgl(sk, orig_size), which drops elements from the sg list added via tls_sw_sendmsg(). Now the use-after-free gets triggered when the socket is being closed, where tls_sk_proto_close() callback is invoked. The tls_complete_pending_work() will figure that there's a pending closed tls record to be flushed and thus calls into the tls_push_pending_closed_record() from there. ctx->push_pending_record() is called from the latter, which is the tls_sw_push_pending_record() from sw path. This again calls into tls_push_record(). And here the tls_fill_prepend() will panic since the buffer address has been freed earlier via trim_both_sgl(). One way to fix it is to move the aead request allocation out of tls_do_encryption() early into tls_push_record(). This means we don't prep the tls header and advance state to the TLS_PENDING_CLOSED_RECORD before allocation which could potentially fail happened. That fixes the issue on my side. Fixes: 3c4d7559159b ("tls: kernel TLS support") Reported-by: syzbot+5c74af81c547738e1684@syzkaller.appspotmail.com Reported-by: syzbot+709f2810a6a05f11d4d3@syzkaller.appspotmail.com Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-15 08:07:45 +07:00
goto out_req;
}
free_sg(sk, ctx->sg_plaintext_data, &ctx->sg_plaintext_num_elem,
&ctx->sg_plaintext_size);
ctx->sg_encrypted_num_elem = 0;
ctx->sg_encrypted_size = 0;
/* Only pass through MSG_DONTWAIT and MSG_NOSIGNAL flags */
rc = tls_push_sg(sk, tls_ctx, ctx->sg_encrypted_data, 0, flags);
if (rc < 0 && rc != -EAGAIN)
tls_err_abort(sk, EBADMSG);
tls_advance_record_sn(sk, &tls_ctx->tx);
tls: fix use-after-free in tls_push_record syzkaller managed to trigger a use-after-free in tls like the following: BUG: KASAN: use-after-free in tls_push_record.constprop.15+0x6a2/0x810 [tls] Write of size 1 at addr ffff88037aa08000 by task a.out/2317 CPU: 3 PID: 2317 Comm: a.out Not tainted 4.17.0+ #144 Hardware name: LENOVO 20FBCTO1WW/20FBCTO1WW, BIOS N1FET47W (1.21 ) 11/28/2016 Call Trace: dump_stack+0x71/0xab print_address_description+0x6a/0x280 kasan_report+0x258/0x380 ? tls_push_record.constprop.15+0x6a2/0x810 [tls] tls_push_record.constprop.15+0x6a2/0x810 [tls] tls_sw_push_pending_record+0x2e/0x40 [tls] tls_sk_proto_close+0x3fe/0x710 [tls] ? tcp_check_oom+0x4c0/0x4c0 ? tls_write_space+0x260/0x260 [tls] ? kmem_cache_free+0x88/0x1f0 inet_release+0xd6/0x1b0 __sock_release+0xc0/0x240 sock_close+0x11/0x20 __fput+0x22d/0x660 task_work_run+0x114/0x1a0 do_exit+0x71a/0x2780 ? mm_update_next_owner+0x650/0x650 ? handle_mm_fault+0x2f5/0x5f0 ? __do_page_fault+0x44f/0xa50 ? mm_fault_error+0x2d0/0x2d0 do_group_exit+0xde/0x300 __x64_sys_exit_group+0x3a/0x50 do_syscall_64+0x9a/0x300 ? page_fault+0x8/0x30 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happened through fault injection where aead_req allocation in tls_do_encryption() eventually failed and we returned -ENOMEM from the function. Turns out that the use-after-free is triggered from tls_sw_sendmsg() in the second tls_push_record(). The error then triggers a jump to waiting for memory in sk_stream_wait_memory() resp. returning immediately in case of MSG_DONTWAIT. What follows is the trim_both_sgl(sk, orig_size), which drops elements from the sg list added via tls_sw_sendmsg(). Now the use-after-free gets triggered when the socket is being closed, where tls_sk_proto_close() callback is invoked. The tls_complete_pending_work() will figure that there's a pending closed tls record to be flushed and thus calls into the tls_push_pending_closed_record() from there. ctx->push_pending_record() is called from the latter, which is the tls_sw_push_pending_record() from sw path. This again calls into tls_push_record(). And here the tls_fill_prepend() will panic since the buffer address has been freed earlier via trim_both_sgl(). One way to fix it is to move the aead request allocation out of tls_do_encryption() early into tls_push_record(). This means we don't prep the tls header and advance state to the TLS_PENDING_CLOSED_RECORD before allocation which could potentially fail happened. That fixes the issue on my side. Fixes: 3c4d7559159b ("tls: kernel TLS support") Reported-by: syzbot+5c74af81c547738e1684@syzkaller.appspotmail.com Reported-by: syzbot+709f2810a6a05f11d4d3@syzkaller.appspotmail.com Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-15 08:07:45 +07:00
out_req:
aead_request_free(req);
return rc;
}
static int tls_sw_push_pending_record(struct sock *sk, int flags)
{
return tls_push_record(sk, flags, TLS_RECORD_TYPE_DATA);
}
static int zerocopy_from_iter(struct sock *sk, struct iov_iter *from,
int length, int *pages_used,
unsigned int *size_used,
struct scatterlist *to, int to_max_pages,
bool charge)
{
struct page *pages[MAX_SKB_FRAGS];
size_t offset;
ssize_t copied, use;
int i = 0;
unsigned int size = *size_used;
int num_elem = *pages_used;
int rc = 0;
int maxpages;
while (length > 0) {
i = 0;
maxpages = to_max_pages - num_elem;
if (maxpages == 0) {
rc = -EFAULT;
goto out;
}
copied = iov_iter_get_pages(from, pages,
length,
maxpages, &offset);
if (copied <= 0) {
rc = -EFAULT;
goto out;
}
iov_iter_advance(from, copied);
length -= copied;
size += copied;
while (copied) {
use = min_t(int, copied, PAGE_SIZE - offset);
sg_set_page(&to[num_elem],
pages[i], use, offset);
sg_unmark_end(&to[num_elem]);
if (charge)
sk_mem_charge(sk, use);
offset = 0;
copied -= use;
++i;
++num_elem;
}
}
/* Mark the end in the last sg entry if newly added */
if (num_elem > *pages_used)
sg_mark_end(&to[num_elem - 1]);
out:
if (rc)
iov_iter_revert(from, size - *size_used);
*size_used = size;
*pages_used = num_elem;
return rc;
}
static int memcopy_from_iter(struct sock *sk, struct iov_iter *from,
int bytes)
{
struct tls_context *tls_ctx = tls_get_ctx(sk);
struct tls_sw_context_tx *ctx = tls_sw_ctx_tx(tls_ctx);
struct scatterlist *sg = ctx->sg_plaintext_data;
int copy, i, rc = 0;
for (i = tls_ctx->pending_open_record_frags;
i < ctx->sg_plaintext_num_elem; ++i) {
copy = sg[i].length;
if (copy_from_iter(
page_address(sg_page(&sg[i])) + sg[i].offset,
copy, from) != copy) {
rc = -EFAULT;
goto out;
}
bytes -= copy;
++tls_ctx->pending_open_record_frags;
if (!bytes)
break;
}
out:
return rc;
}
int tls_sw_sendmsg(struct sock *sk, struct msghdr *msg, size_t size)
{
struct tls_context *tls_ctx = tls_get_ctx(sk);
struct tls_sw_context_tx *ctx = tls_sw_ctx_tx(tls_ctx);
int ret;
int required_size;
long timeo = sock_sndtimeo(sk, msg->msg_flags & MSG_DONTWAIT);
bool eor = !(msg->msg_flags & MSG_MORE);
size_t try_to_copy, copied = 0;
unsigned char record_type = TLS_RECORD_TYPE_DATA;
int record_room;
bool full_record;
int orig_size;
bool is_kvec = msg->msg_iter.type & ITER_KVEC;
if (msg->msg_flags & ~(MSG_MORE | MSG_DONTWAIT | MSG_NOSIGNAL))
return -ENOTSUPP;
lock_sock(sk);
ret = tls_complete_pending_work(sk, tls_ctx, msg->msg_flags, &timeo);
if (ret)
goto send_end;
if (unlikely(msg->msg_controllen)) {
ret = tls_proccess_cmsg(sk, msg, &record_type);
if (ret)
goto send_end;
}
while (msg_data_left(msg)) {
if (sk->sk_err) {
ret = -sk->sk_err;
goto send_end;
}
orig_size = ctx->sg_plaintext_size;
full_record = false;
try_to_copy = msg_data_left(msg);
record_room = TLS_MAX_PAYLOAD_SIZE - ctx->sg_plaintext_size;
if (try_to_copy >= record_room) {
try_to_copy = record_room;
full_record = true;
}
required_size = ctx->sg_plaintext_size + try_to_copy +
tls_ctx->tx.overhead_size;
if (!sk_stream_memory_free(sk))
goto wait_for_sndbuf;
alloc_encrypted:
ret = alloc_encrypted_sg(sk, required_size);
if (ret) {
if (ret != -ENOSPC)
goto wait_for_memory;
/* Adjust try_to_copy according to the amount that was
* actually allocated. The difference is due
* to max sg elements limit
*/
try_to_copy -= required_size - ctx->sg_encrypted_size;
full_record = true;
}
if (!is_kvec && (full_record || eor)) {
ret = zerocopy_from_iter(sk, &msg->msg_iter,
try_to_copy, &ctx->sg_plaintext_num_elem,
&ctx->sg_plaintext_size,
ctx->sg_plaintext_data,
ARRAY_SIZE(ctx->sg_plaintext_data),
true);
if (ret)
goto fallback_to_reg_send;
copied += try_to_copy;
ret = tls_push_record(sk, msg->msg_flags, record_type);
if (ret)
goto send_end;
continue;
fallback_to_reg_send:
trim_sg(sk, ctx->sg_plaintext_data,
&ctx->sg_plaintext_num_elem,
&ctx->sg_plaintext_size,
orig_size);
}
required_size = ctx->sg_plaintext_size + try_to_copy;
alloc_plaintext:
ret = alloc_plaintext_sg(sk, required_size);
if (ret) {
if (ret != -ENOSPC)
goto wait_for_memory;
/* Adjust try_to_copy according to the amount that was
* actually allocated. The difference is due
* to max sg elements limit
*/
try_to_copy -= required_size - ctx->sg_plaintext_size;
full_record = true;
trim_sg(sk, ctx->sg_encrypted_data,
&ctx->sg_encrypted_num_elem,
&ctx->sg_encrypted_size,
ctx->sg_plaintext_size +
tls_ctx->tx.overhead_size);
}
ret = memcopy_from_iter(sk, &msg->msg_iter, try_to_copy);
if (ret)
goto trim_sgl;
copied += try_to_copy;
if (full_record || eor) {
push_record:
ret = tls_push_record(sk, msg->msg_flags, record_type);
if (ret) {
if (ret == -ENOMEM)
goto wait_for_memory;
goto send_end;
}
}
continue;
wait_for_sndbuf:
set_bit(SOCK_NOSPACE, &sk->sk_socket->flags);
wait_for_memory:
ret = sk_stream_wait_memory(sk, &timeo);
if (ret) {
trim_sgl:
trim_both_sgl(sk, orig_size);
goto send_end;
}
if (tls_is_pending_closed_record(tls_ctx))
goto push_record;
if (ctx->sg_encrypted_size < required_size)
goto alloc_encrypted;
goto alloc_plaintext;
}
send_end:
ret = sk_stream_error(sk, msg->msg_flags, ret);
release_sock(sk);
return copied ? copied : ret;
}
int tls_sw_sendpage(struct sock *sk, struct page *page,
int offset, size_t size, int flags)
{
struct tls_context *tls_ctx = tls_get_ctx(sk);
struct tls_sw_context_tx *ctx = tls_sw_ctx_tx(tls_ctx);
int ret;
long timeo = sock_sndtimeo(sk, flags & MSG_DONTWAIT);
bool eor;
size_t orig_size = size;
unsigned char record_type = TLS_RECORD_TYPE_DATA;
struct scatterlist *sg;
bool full_record;
int record_room;
if (flags & ~(MSG_MORE | MSG_DONTWAIT | MSG_NOSIGNAL |
MSG_SENDPAGE_NOTLAST))
return -ENOTSUPP;
/* No MSG_EOR from splice, only look at MSG_MORE */
eor = !(flags & (MSG_MORE | MSG_SENDPAGE_NOTLAST));
lock_sock(sk);
sk_clear_bit(SOCKWQ_ASYNC_NOSPACE, sk);
ret = tls_complete_pending_work(sk, tls_ctx, flags, &timeo);
if (ret)
goto sendpage_end;
/* Call the sk_stream functions to manage the sndbuf mem. */
while (size > 0) {
size_t copy, required_size;
if (sk->sk_err) {
ret = -sk->sk_err;
goto sendpage_end;
}
full_record = false;
record_room = TLS_MAX_PAYLOAD_SIZE - ctx->sg_plaintext_size;
copy = size;
if (copy >= record_room) {
copy = record_room;
full_record = true;
}
required_size = ctx->sg_plaintext_size + copy +
tls_ctx->tx.overhead_size;
if (!sk_stream_memory_free(sk))
goto wait_for_sndbuf;
alloc_payload:
ret = alloc_encrypted_sg(sk, required_size);
if (ret) {
if (ret != -ENOSPC)
goto wait_for_memory;
/* Adjust copy according to the amount that was
* actually allocated. The difference is due
* to max sg elements limit
*/
copy -= required_size - ctx->sg_plaintext_size;
full_record = true;
}
get_page(page);
sg = ctx->sg_plaintext_data + ctx->sg_plaintext_num_elem;
sg_set_page(sg, page, copy, offset);
sg_unmark_end(sg);
ctx->sg_plaintext_num_elem++;
sk_mem_charge(sk, copy);
offset += copy;
size -= copy;
ctx->sg_plaintext_size += copy;
tls_ctx->pending_open_record_frags = ctx->sg_plaintext_num_elem;
if (full_record || eor ||
ctx->sg_plaintext_num_elem ==
ARRAY_SIZE(ctx->sg_plaintext_data)) {
push_record:
ret = tls_push_record(sk, flags, record_type);
if (ret) {
if (ret == -ENOMEM)
goto wait_for_memory;
goto sendpage_end;
}
}
continue;
wait_for_sndbuf:
set_bit(SOCK_NOSPACE, &sk->sk_socket->flags);
wait_for_memory:
ret = sk_stream_wait_memory(sk, &timeo);
if (ret) {
trim_both_sgl(sk, ctx->sg_plaintext_size);
goto sendpage_end;
}
if (tls_is_pending_closed_record(tls_ctx))
goto push_record;
goto alloc_payload;
}
sendpage_end:
if (orig_size > size)
ret = orig_size - size;
else
ret = sk_stream_error(sk, flags, ret);
release_sock(sk);
return ret;
}
static struct sk_buff *tls_wait_data(struct sock *sk, int flags,
long timeo, int *err)
{
struct tls_context *tls_ctx = tls_get_ctx(sk);
struct tls_sw_context_rx *ctx = tls_sw_ctx_rx(tls_ctx);
struct sk_buff *skb;
DEFINE_WAIT_FUNC(wait, woken_wake_function);
while (!(skb = ctx->recv_pkt)) {
if (sk->sk_err) {
*err = sock_error(sk);
return NULL;
}
if (sk->sk_shutdown & RCV_SHUTDOWN)
return NULL;
if (sock_flag(sk, SOCK_DONE))
return NULL;
if ((flags & MSG_DONTWAIT) || !timeo) {
*err = -EAGAIN;
return NULL;
}
add_wait_queue(sk_sleep(sk), &wait);
sk_set_bit(SOCKWQ_ASYNC_WAITDATA, sk);
sk_wait_event(sk, &timeo, ctx->recv_pkt != skb, &wait);
sk_clear_bit(SOCKWQ_ASYNC_WAITDATA, sk);
remove_wait_queue(sk_sleep(sk), &wait);
/* Handle signals */
if (signal_pending(current)) {
*err = sock_intr_errno(timeo);
return NULL;
}
}
return skb;
}
/* This function decrypts the input skb into either out_iov or in out_sg
* or in skb buffers itself. The input parameter 'zc' indicates if
* zero-copy mode needs to be tried or not. With zero-copy mode, either
* out_iov or out_sg must be non-NULL. In case both out_iov and out_sg are
* NULL, then the decryption happens inside skb buffers itself, i.e.
* zero-copy gets disabled and 'zc' is updated.
*/
static int decrypt_internal(struct sock *sk, struct sk_buff *skb,
struct iov_iter *out_iov,
struct scatterlist *out_sg,
int *chunk, bool *zc)
{
struct tls_context *tls_ctx = tls_get_ctx(sk);
struct tls_sw_context_rx *ctx = tls_sw_ctx_rx(tls_ctx);
struct strp_msg *rxm = strp_msg(skb);
int n_sgin, n_sgout, nsg, mem_size, aead_size, err, pages = 0;
struct aead_request *aead_req;
struct sk_buff *unused;
u8 *aad, *iv, *mem = NULL;
struct scatterlist *sgin = NULL;
struct scatterlist *sgout = NULL;
const int data_len = rxm->full_len - tls_ctx->rx.overhead_size;
if (*zc && (out_iov || out_sg)) {
if (out_iov)
n_sgout = iov_iter_npages(out_iov, INT_MAX) + 1;
else
n_sgout = sg_nents(out_sg);
n_sgin = skb_nsg(skb, rxm->offset + tls_ctx->rx.prepend_size,
rxm->full_len - tls_ctx->rx.prepend_size);
} else {
n_sgout = 0;
*zc = false;
n_sgin = skb_cow_data(skb, 0, &unused);
}
if (n_sgin < 1)
return -EBADMSG;
/* Increment to accommodate AAD */
n_sgin = n_sgin + 1;
nsg = n_sgin + n_sgout;
aead_size = sizeof(*aead_req) + crypto_aead_reqsize(ctx->aead_recv);
mem_size = aead_size + (nsg * sizeof(struct scatterlist));
mem_size = mem_size + TLS_AAD_SPACE_SIZE;
mem_size = mem_size + crypto_aead_ivsize(ctx->aead_recv);
/* Allocate a single block of memory which contains
* aead_req || sgin[] || sgout[] || aad || iv.
* This order achieves correct alignment for aead_req, sgin, sgout.
*/
mem = kmalloc(mem_size, sk->sk_allocation);
if (!mem)
return -ENOMEM;
/* Segment the allocated memory */
aead_req = (struct aead_request *)mem;
sgin = (struct scatterlist *)(mem + aead_size);
sgout = sgin + n_sgin;
aad = (u8 *)(sgout + n_sgout);
iv = aad + TLS_AAD_SPACE_SIZE;
/* Prepare IV */
err = skb_copy_bits(skb, rxm->offset + TLS_HEADER_SIZE,
iv + TLS_CIPHER_AES_GCM_128_SALT_SIZE,
tls_ctx->rx.iv_size);
if (err < 0) {
kfree(mem);
return err;
}
memcpy(iv, tls_ctx->rx.iv, TLS_CIPHER_AES_GCM_128_SALT_SIZE);
/* Prepare AAD */
tls_make_aad(aad, rxm->full_len - tls_ctx->rx.overhead_size,
tls_ctx->rx.rec_seq, tls_ctx->rx.rec_seq_size,
ctx->control);
/* Prepare sgin */
sg_init_table(sgin, n_sgin);
sg_set_buf(&sgin[0], aad, TLS_AAD_SPACE_SIZE);
err = skb_to_sgvec(skb, &sgin[1],
rxm->offset + tls_ctx->rx.prepend_size,
rxm->full_len - tls_ctx->rx.prepend_size);
if (err < 0) {
kfree(mem);
return err;
}
if (n_sgout) {
if (out_iov) {
sg_init_table(sgout, n_sgout);
sg_set_buf(&sgout[0], aad, TLS_AAD_SPACE_SIZE);
*chunk = 0;
err = zerocopy_from_iter(sk, out_iov, data_len, &pages,
chunk, &sgout[1],
(n_sgout - 1), false);
if (err < 0)
goto fallback_to_reg_recv;
} else if (out_sg) {
memcpy(sgout, out_sg, n_sgout * sizeof(*sgout));
} else {
goto fallback_to_reg_recv;
}
} else {
fallback_to_reg_recv:
sgout = sgin;
pages = 0;
*chunk = 0;
*zc = false;
}
/* Prepare and submit AEAD request */
net/tls: Add support for async decryption of tls records When tls records are decrypted using asynchronous acclerators such as NXP CAAM engine, the crypto apis return -EINPROGRESS. Presently, on getting -EINPROGRESS, the tls record processing stops till the time the crypto accelerator finishes off and returns the result. This incurs a context switch and is not an efficient way of accessing the crypto accelerators. Crypto accelerators work efficient when they are queued with multiple crypto jobs without having to wait for the previous ones to complete. The patch submits multiple crypto requests without having to wait for for previous ones to complete. This has been implemented for records which are decrypted in zero-copy mode. At the end of recvmsg(), we wait for all the asynchronous decryption requests to complete. The references to records which have been sent for async decryption are dropped. For cases where record decryption is not possible in zero-copy mode, asynchronous decryption is not used and we wait for decryption crypto api to complete. For crypto requests executing in async fashion, the memory for aead_request, sglists and skb etc is freed from the decryption completion handler. The decryption completion handler wakesup the sleeping user context when recvmsg() flags that it has done sending all the decryption requests and there are no more decryption requests pending to be completed. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29 16:56:55 +07:00
err = tls_do_decryption(sk, skb, sgin, sgout, iv,
data_len, aead_req, *zc);
if (err == -EINPROGRESS)
return err;
/* Release the pages in case iov was mapped to pages */
for (; pages > 0; pages--)
put_page(sg_page(&sgout[pages]));
kfree(mem);
return err;
}
static int decrypt_skb_update(struct sock *sk, struct sk_buff *skb,
struct iov_iter *dest, int *chunk, bool *zc)
{
struct tls_context *tls_ctx = tls_get_ctx(sk);
struct tls_sw_context_rx *ctx = tls_sw_ctx_rx(tls_ctx);
struct strp_msg *rxm = strp_msg(skb);
int err = 0;
#ifdef CONFIG_TLS_DEVICE
err = tls_device_decrypted(sk, skb);
if (err < 0)
return err;
#endif
if (!ctx->decrypted) {
err = decrypt_internal(sk, skb, dest, NULL, chunk, zc);
net/tls: Add support for async decryption of tls records When tls records are decrypted using asynchronous acclerators such as NXP CAAM engine, the crypto apis return -EINPROGRESS. Presently, on getting -EINPROGRESS, the tls record processing stops till the time the crypto accelerator finishes off and returns the result. This incurs a context switch and is not an efficient way of accessing the crypto accelerators. Crypto accelerators work efficient when they are queued with multiple crypto jobs without having to wait for the previous ones to complete. The patch submits multiple crypto requests without having to wait for for previous ones to complete. This has been implemented for records which are decrypted in zero-copy mode. At the end of recvmsg(), we wait for all the asynchronous decryption requests to complete. The references to records which have been sent for async decryption are dropped. For cases where record decryption is not possible in zero-copy mode, asynchronous decryption is not used and we wait for decryption crypto api to complete. For crypto requests executing in async fashion, the memory for aead_request, sglists and skb etc is freed from the decryption completion handler. The decryption completion handler wakesup the sleeping user context when recvmsg() flags that it has done sending all the decryption requests and there are no more decryption requests pending to be completed. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29 16:56:55 +07:00
if (err < 0) {
if (err == -EINPROGRESS)
tls_advance_record_sn(sk, &tls_ctx->rx);
return err;
net/tls: Add support for async decryption of tls records When tls records are decrypted using asynchronous acclerators such as NXP CAAM engine, the crypto apis return -EINPROGRESS. Presently, on getting -EINPROGRESS, the tls record processing stops till the time the crypto accelerator finishes off and returns the result. This incurs a context switch and is not an efficient way of accessing the crypto accelerators. Crypto accelerators work efficient when they are queued with multiple crypto jobs without having to wait for the previous ones to complete. The patch submits multiple crypto requests without having to wait for for previous ones to complete. This has been implemented for records which are decrypted in zero-copy mode. At the end of recvmsg(), we wait for all the asynchronous decryption requests to complete. The references to records which have been sent for async decryption are dropped. For cases where record decryption is not possible in zero-copy mode, asynchronous decryption is not used and we wait for decryption crypto api to complete. For crypto requests executing in async fashion, the memory for aead_request, sglists and skb etc is freed from the decryption completion handler. The decryption completion handler wakesup the sleeping user context when recvmsg() flags that it has done sending all the decryption requests and there are no more decryption requests pending to be completed. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29 16:56:55 +07:00
}
} else {
*zc = false;
}
rxm->offset += tls_ctx->rx.prepend_size;
rxm->full_len -= tls_ctx->rx.overhead_size;
tls_advance_record_sn(sk, &tls_ctx->rx);
ctx->decrypted = true;
ctx->saved_data_ready(sk);
return err;
}
int decrypt_skb(struct sock *sk, struct sk_buff *skb,
struct scatterlist *sgout)
{
bool zc = true;
int chunk;
return decrypt_internal(sk, skb, NULL, sgout, &chunk, &zc);
}
static bool tls_sw_advance_skb(struct sock *sk, struct sk_buff *skb,
unsigned int len)
{
struct tls_context *tls_ctx = tls_get_ctx(sk);
struct tls_sw_context_rx *ctx = tls_sw_ctx_rx(tls_ctx);
net/tls: Add support for async decryption of tls records When tls records are decrypted using asynchronous acclerators such as NXP CAAM engine, the crypto apis return -EINPROGRESS. Presently, on getting -EINPROGRESS, the tls record processing stops till the time the crypto accelerator finishes off and returns the result. This incurs a context switch and is not an efficient way of accessing the crypto accelerators. Crypto accelerators work efficient when they are queued with multiple crypto jobs without having to wait for the previous ones to complete. The patch submits multiple crypto requests without having to wait for for previous ones to complete. This has been implemented for records which are decrypted in zero-copy mode. At the end of recvmsg(), we wait for all the asynchronous decryption requests to complete. The references to records which have been sent for async decryption are dropped. For cases where record decryption is not possible in zero-copy mode, asynchronous decryption is not used and we wait for decryption crypto api to complete. For crypto requests executing in async fashion, the memory for aead_request, sglists and skb etc is freed from the decryption completion handler. The decryption completion handler wakesup the sleeping user context when recvmsg() flags that it has done sending all the decryption requests and there are no more decryption requests pending to be completed. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29 16:56:55 +07:00
if (skb) {
struct strp_msg *rxm = strp_msg(skb);
net/tls: Add support for async decryption of tls records When tls records are decrypted using asynchronous acclerators such as NXP CAAM engine, the crypto apis return -EINPROGRESS. Presently, on getting -EINPROGRESS, the tls record processing stops till the time the crypto accelerator finishes off and returns the result. This incurs a context switch and is not an efficient way of accessing the crypto accelerators. Crypto accelerators work efficient when they are queued with multiple crypto jobs without having to wait for the previous ones to complete. The patch submits multiple crypto requests without having to wait for for previous ones to complete. This has been implemented for records which are decrypted in zero-copy mode. At the end of recvmsg(), we wait for all the asynchronous decryption requests to complete. The references to records which have been sent for async decryption are dropped. For cases where record decryption is not possible in zero-copy mode, asynchronous decryption is not used and we wait for decryption crypto api to complete. For crypto requests executing in async fashion, the memory for aead_request, sglists and skb etc is freed from the decryption completion handler. The decryption completion handler wakesup the sleeping user context when recvmsg() flags that it has done sending all the decryption requests and there are no more decryption requests pending to be completed. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29 16:56:55 +07:00
if (len < rxm->full_len) {
rxm->offset += len;
rxm->full_len -= len;
return false;
}
kfree_skb(skb);
}
/* Finished with message */
ctx->recv_pkt = NULL;
__strp_unpause(&ctx->strp);
return true;
}
int tls_sw_recvmsg(struct sock *sk,
struct msghdr *msg,
size_t len,
int nonblock,
int flags,
int *addr_len)
{
struct tls_context *tls_ctx = tls_get_ctx(sk);
struct tls_sw_context_rx *ctx = tls_sw_ctx_rx(tls_ctx);
unsigned char control;
struct strp_msg *rxm;
struct sk_buff *skb;
ssize_t copied = 0;
bool cmsg = false;
int target, err = 0;
long timeo;
bool is_kvec = msg->msg_iter.type & ITER_KVEC;
net/tls: Add support for async decryption of tls records When tls records are decrypted using asynchronous acclerators such as NXP CAAM engine, the crypto apis return -EINPROGRESS. Presently, on getting -EINPROGRESS, the tls record processing stops till the time the crypto accelerator finishes off and returns the result. This incurs a context switch and is not an efficient way of accessing the crypto accelerators. Crypto accelerators work efficient when they are queued with multiple crypto jobs without having to wait for the previous ones to complete. The patch submits multiple crypto requests without having to wait for for previous ones to complete. This has been implemented for records which are decrypted in zero-copy mode. At the end of recvmsg(), we wait for all the asynchronous decryption requests to complete. The references to records which have been sent for async decryption are dropped. For cases where record decryption is not possible in zero-copy mode, asynchronous decryption is not used and we wait for decryption crypto api to complete. For crypto requests executing in async fashion, the memory for aead_request, sglists and skb etc is freed from the decryption completion handler. The decryption completion handler wakesup the sleeping user context when recvmsg() flags that it has done sending all the decryption requests and there are no more decryption requests pending to be completed. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29 16:56:55 +07:00
int num_async = 0;
flags |= nonblock;
if (unlikely(flags & MSG_ERRQUEUE))
return sock_recv_errqueue(sk, msg, len, SOL_IP, IP_RECVERR);
lock_sock(sk);
target = sock_rcvlowat(sk, flags & MSG_WAITALL, len);
timeo = sock_rcvtimeo(sk, flags & MSG_DONTWAIT);
do {
bool zc = false;
net/tls: Add support for async decryption of tls records When tls records are decrypted using asynchronous acclerators such as NXP CAAM engine, the crypto apis return -EINPROGRESS. Presently, on getting -EINPROGRESS, the tls record processing stops till the time the crypto accelerator finishes off and returns the result. This incurs a context switch and is not an efficient way of accessing the crypto accelerators. Crypto accelerators work efficient when they are queued with multiple crypto jobs without having to wait for the previous ones to complete. The patch submits multiple crypto requests without having to wait for for previous ones to complete. This has been implemented for records which are decrypted in zero-copy mode. At the end of recvmsg(), we wait for all the asynchronous decryption requests to complete. The references to records which have been sent for async decryption are dropped. For cases where record decryption is not possible in zero-copy mode, asynchronous decryption is not used and we wait for decryption crypto api to complete. For crypto requests executing in async fashion, the memory for aead_request, sglists and skb etc is freed from the decryption completion handler. The decryption completion handler wakesup the sleeping user context when recvmsg() flags that it has done sending all the decryption requests and there are no more decryption requests pending to be completed. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29 16:56:55 +07:00
bool async = false;
int chunk = 0;
skb = tls_wait_data(sk, flags, timeo, &err);
if (!skb)
goto recv_end;
rxm = strp_msg(skb);
net/tls: Add support for async decryption of tls records When tls records are decrypted using asynchronous acclerators such as NXP CAAM engine, the crypto apis return -EINPROGRESS. Presently, on getting -EINPROGRESS, the tls record processing stops till the time the crypto accelerator finishes off and returns the result. This incurs a context switch and is not an efficient way of accessing the crypto accelerators. Crypto accelerators work efficient when they are queued with multiple crypto jobs without having to wait for the previous ones to complete. The patch submits multiple crypto requests without having to wait for for previous ones to complete. This has been implemented for records which are decrypted in zero-copy mode. At the end of recvmsg(), we wait for all the asynchronous decryption requests to complete. The references to records which have been sent for async decryption are dropped. For cases where record decryption is not possible in zero-copy mode, asynchronous decryption is not used and we wait for decryption crypto api to complete. For crypto requests executing in async fashion, the memory for aead_request, sglists and skb etc is freed from the decryption completion handler. The decryption completion handler wakesup the sleeping user context when recvmsg() flags that it has done sending all the decryption requests and there are no more decryption requests pending to be completed. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29 16:56:55 +07:00
if (!cmsg) {
int cerr;
cerr = put_cmsg(msg, SOL_TLS, TLS_GET_RECORD_TYPE,
sizeof(ctx->control), &ctx->control);
cmsg = true;
control = ctx->control;
if (ctx->control != TLS_RECORD_TYPE_DATA) {
if (cerr || msg->msg_flags & MSG_CTRUNC) {
err = -EIO;
goto recv_end;
}
}
} else if (control != ctx->control) {
goto recv_end;
}
if (!ctx->decrypted) {
int to_copy = rxm->full_len - tls_ctx->rx.overhead_size;
if (!is_kvec && to_copy <= len &&
likely(!(flags & MSG_PEEK)))
zc = true;
err = decrypt_skb_update(sk, skb, &msg->msg_iter,
&chunk, &zc);
net/tls: Add support for async decryption of tls records When tls records are decrypted using asynchronous acclerators such as NXP CAAM engine, the crypto apis return -EINPROGRESS. Presently, on getting -EINPROGRESS, the tls record processing stops till the time the crypto accelerator finishes off and returns the result. This incurs a context switch and is not an efficient way of accessing the crypto accelerators. Crypto accelerators work efficient when they are queued with multiple crypto jobs without having to wait for the previous ones to complete. The patch submits multiple crypto requests without having to wait for for previous ones to complete. This has been implemented for records which are decrypted in zero-copy mode. At the end of recvmsg(), we wait for all the asynchronous decryption requests to complete. The references to records which have been sent for async decryption are dropped. For cases where record decryption is not possible in zero-copy mode, asynchronous decryption is not used and we wait for decryption crypto api to complete. For crypto requests executing in async fashion, the memory for aead_request, sglists and skb etc is freed from the decryption completion handler. The decryption completion handler wakesup the sleeping user context when recvmsg() flags that it has done sending all the decryption requests and there are no more decryption requests pending to be completed. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29 16:56:55 +07:00
if (err < 0 && err != -EINPROGRESS) {
tls_err_abort(sk, EBADMSG);
goto recv_end;
}
net/tls: Add support for async decryption of tls records When tls records are decrypted using asynchronous acclerators such as NXP CAAM engine, the crypto apis return -EINPROGRESS. Presently, on getting -EINPROGRESS, the tls record processing stops till the time the crypto accelerator finishes off and returns the result. This incurs a context switch and is not an efficient way of accessing the crypto accelerators. Crypto accelerators work efficient when they are queued with multiple crypto jobs without having to wait for the previous ones to complete. The patch submits multiple crypto requests without having to wait for for previous ones to complete. This has been implemented for records which are decrypted in zero-copy mode. At the end of recvmsg(), we wait for all the asynchronous decryption requests to complete. The references to records which have been sent for async decryption are dropped. For cases where record decryption is not possible in zero-copy mode, asynchronous decryption is not used and we wait for decryption crypto api to complete. For crypto requests executing in async fashion, the memory for aead_request, sglists and skb etc is freed from the decryption completion handler. The decryption completion handler wakesup the sleeping user context when recvmsg() flags that it has done sending all the decryption requests and there are no more decryption requests pending to be completed. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29 16:56:55 +07:00
if (err == -EINPROGRESS) {
async = true;
num_async++;
goto pick_next_record;
}
ctx->decrypted = true;
}
if (!zc) {
chunk = min_t(unsigned int, rxm->full_len, len);
net/tls: Add support for async decryption of tls records When tls records are decrypted using asynchronous acclerators such as NXP CAAM engine, the crypto apis return -EINPROGRESS. Presently, on getting -EINPROGRESS, the tls record processing stops till the time the crypto accelerator finishes off and returns the result. This incurs a context switch and is not an efficient way of accessing the crypto accelerators. Crypto accelerators work efficient when they are queued with multiple crypto jobs without having to wait for the previous ones to complete. The patch submits multiple crypto requests without having to wait for for previous ones to complete. This has been implemented for records which are decrypted in zero-copy mode. At the end of recvmsg(), we wait for all the asynchronous decryption requests to complete. The references to records which have been sent for async decryption are dropped. For cases where record decryption is not possible in zero-copy mode, asynchronous decryption is not used and we wait for decryption crypto api to complete. For crypto requests executing in async fashion, the memory for aead_request, sglists and skb etc is freed from the decryption completion handler. The decryption completion handler wakesup the sleeping user context when recvmsg() flags that it has done sending all the decryption requests and there are no more decryption requests pending to be completed. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29 16:56:55 +07:00
err = skb_copy_datagram_msg(skb, rxm->offset, msg,
chunk);
if (err < 0)
goto recv_end;
}
net/tls: Add support for async decryption of tls records When tls records are decrypted using asynchronous acclerators such as NXP CAAM engine, the crypto apis return -EINPROGRESS. Presently, on getting -EINPROGRESS, the tls record processing stops till the time the crypto accelerator finishes off and returns the result. This incurs a context switch and is not an efficient way of accessing the crypto accelerators. Crypto accelerators work efficient when they are queued with multiple crypto jobs without having to wait for the previous ones to complete. The patch submits multiple crypto requests without having to wait for for previous ones to complete. This has been implemented for records which are decrypted in zero-copy mode. At the end of recvmsg(), we wait for all the asynchronous decryption requests to complete. The references to records which have been sent for async decryption are dropped. For cases where record decryption is not possible in zero-copy mode, asynchronous decryption is not used and we wait for decryption crypto api to complete. For crypto requests executing in async fashion, the memory for aead_request, sglists and skb etc is freed from the decryption completion handler. The decryption completion handler wakesup the sleeping user context when recvmsg() flags that it has done sending all the decryption requests and there are no more decryption requests pending to be completed. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29 16:56:55 +07:00
pick_next_record:
copied += chunk;
len -= chunk;
if (likely(!(flags & MSG_PEEK))) {
u8 control = ctx->control;
net/tls: Add support for async decryption of tls records When tls records are decrypted using asynchronous acclerators such as NXP CAAM engine, the crypto apis return -EINPROGRESS. Presently, on getting -EINPROGRESS, the tls record processing stops till the time the crypto accelerator finishes off and returns the result. This incurs a context switch and is not an efficient way of accessing the crypto accelerators. Crypto accelerators work efficient when they are queued with multiple crypto jobs without having to wait for the previous ones to complete. The patch submits multiple crypto requests without having to wait for for previous ones to complete. This has been implemented for records which are decrypted in zero-copy mode. At the end of recvmsg(), we wait for all the asynchronous decryption requests to complete. The references to records which have been sent for async decryption are dropped. For cases where record decryption is not possible in zero-copy mode, asynchronous decryption is not used and we wait for decryption crypto api to complete. For crypto requests executing in async fashion, the memory for aead_request, sglists and skb etc is freed from the decryption completion handler. The decryption completion handler wakesup the sleeping user context when recvmsg() flags that it has done sending all the decryption requests and there are no more decryption requests pending to be completed. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29 16:56:55 +07:00
/* For async, drop current skb reference */
if (async)
skb = NULL;
if (tls_sw_advance_skb(sk, skb, chunk)) {
/* Return full control message to
* userspace before trying to parse
* another message type
*/
msg->msg_flags |= MSG_EOR;
if (control != TLS_RECORD_TYPE_DATA)
goto recv_end;
net/tls: Add support for async decryption of tls records When tls records are decrypted using asynchronous acclerators such as NXP CAAM engine, the crypto apis return -EINPROGRESS. Presently, on getting -EINPROGRESS, the tls record processing stops till the time the crypto accelerator finishes off and returns the result. This incurs a context switch and is not an efficient way of accessing the crypto accelerators. Crypto accelerators work efficient when they are queued with multiple crypto jobs without having to wait for the previous ones to complete. The patch submits multiple crypto requests without having to wait for for previous ones to complete. This has been implemented for records which are decrypted in zero-copy mode. At the end of recvmsg(), we wait for all the asynchronous decryption requests to complete. The references to records which have been sent for async decryption are dropped. For cases where record decryption is not possible in zero-copy mode, asynchronous decryption is not used and we wait for decryption crypto api to complete. For crypto requests executing in async fashion, the memory for aead_request, sglists and skb etc is freed from the decryption completion handler. The decryption completion handler wakesup the sleeping user context when recvmsg() flags that it has done sending all the decryption requests and there are no more decryption requests pending to be completed. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29 16:56:55 +07:00
} else {
break;
}
}
net/tls: Add support for async decryption of tls records When tls records are decrypted using asynchronous acclerators such as NXP CAAM engine, the crypto apis return -EINPROGRESS. Presently, on getting -EINPROGRESS, the tls record processing stops till the time the crypto accelerator finishes off and returns the result. This incurs a context switch and is not an efficient way of accessing the crypto accelerators. Crypto accelerators work efficient when they are queued with multiple crypto jobs without having to wait for the previous ones to complete. The patch submits multiple crypto requests without having to wait for for previous ones to complete. This has been implemented for records which are decrypted in zero-copy mode. At the end of recvmsg(), we wait for all the asynchronous decryption requests to complete. The references to records which have been sent for async decryption are dropped. For cases where record decryption is not possible in zero-copy mode, asynchronous decryption is not used and we wait for decryption crypto api to complete. For crypto requests executing in async fashion, the memory for aead_request, sglists and skb etc is freed from the decryption completion handler. The decryption completion handler wakesup the sleeping user context when recvmsg() flags that it has done sending all the decryption requests and there are no more decryption requests pending to be completed. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29 16:56:55 +07:00
/* If we have a new message from strparser, continue now. */
if (copied >= target && !ctx->recv_pkt)
break;
} while (len);
recv_end:
net/tls: Add support for async decryption of tls records When tls records are decrypted using asynchronous acclerators such as NXP CAAM engine, the crypto apis return -EINPROGRESS. Presently, on getting -EINPROGRESS, the tls record processing stops till the time the crypto accelerator finishes off and returns the result. This incurs a context switch and is not an efficient way of accessing the crypto accelerators. Crypto accelerators work efficient when they are queued with multiple crypto jobs without having to wait for the previous ones to complete. The patch submits multiple crypto requests without having to wait for for previous ones to complete. This has been implemented for records which are decrypted in zero-copy mode. At the end of recvmsg(), we wait for all the asynchronous decryption requests to complete. The references to records which have been sent for async decryption are dropped. For cases where record decryption is not possible in zero-copy mode, asynchronous decryption is not used and we wait for decryption crypto api to complete. For crypto requests executing in async fashion, the memory for aead_request, sglists and skb etc is freed from the decryption completion handler. The decryption completion handler wakesup the sleeping user context when recvmsg() flags that it has done sending all the decryption requests and there are no more decryption requests pending to be completed. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29 16:56:55 +07:00
if (num_async) {
/* Wait for all previously submitted records to be decrypted */
smp_store_mb(ctx->async_notify, true);
if (atomic_read(&ctx->decrypt_pending)) {
err = crypto_wait_req(-EINPROGRESS, &ctx->async_wait);
if (err) {
/* one of async decrypt failed */
tls_err_abort(sk, err);
copied = 0;
}
} else {
reinit_completion(&ctx->async_wait.completion);
}
WRITE_ONCE(ctx->async_notify, false);
}
release_sock(sk);
return copied ? : err;
}
ssize_t tls_sw_splice_read(struct socket *sock, loff_t *ppos,
struct pipe_inode_info *pipe,
size_t len, unsigned int flags)
{
struct tls_context *tls_ctx = tls_get_ctx(sock->sk);
struct tls_sw_context_rx *ctx = tls_sw_ctx_rx(tls_ctx);
struct strp_msg *rxm = NULL;
struct sock *sk = sock->sk;
struct sk_buff *skb;
ssize_t copied = 0;
int err = 0;
long timeo;
int chunk;
bool zc = false;
lock_sock(sk);
timeo = sock_rcvtimeo(sk, flags & MSG_DONTWAIT);
skb = tls_wait_data(sk, flags, timeo, &err);
if (!skb)
goto splice_read_end;
/* splice does not support reading control messages */
if (ctx->control != TLS_RECORD_TYPE_DATA) {
err = -ENOTSUPP;
goto splice_read_end;
}
if (!ctx->decrypted) {
err = decrypt_skb_update(sk, skb, NULL, &chunk, &zc);
if (err < 0) {
tls_err_abort(sk, EBADMSG);
goto splice_read_end;
}
ctx->decrypted = true;
}
rxm = strp_msg(skb);
chunk = min_t(unsigned int, rxm->full_len, len);
copied = skb_splice_bits(skb, sk, rxm->offset, pipe, chunk, flags);
if (copied < 0)
goto splice_read_end;
if (likely(!(flags & MSG_PEEK)))
tls_sw_advance_skb(sk, skb, copied);
splice_read_end:
release_sock(sk);
return copied ? : err;
}
unsigned int tls_sw_poll(struct file *file, struct socket *sock,
struct poll_table_struct *wait)
{
unsigned int ret;
struct sock *sk = sock->sk;
struct tls_context *tls_ctx = tls_get_ctx(sk);
struct tls_sw_context_rx *ctx = tls_sw_ctx_rx(tls_ctx);
/* Grab POLLOUT and POLLHUP from the underlying socket */
ret = ctx->sk_poll(file, sock, wait);
/* Clear POLLIN bits, and set based on recv_pkt */
ret &= ~(POLLIN | POLLRDNORM);
if (ctx->recv_pkt)
ret |= POLLIN | POLLRDNORM;
return ret;
}
static int tls_read_size(struct strparser *strp, struct sk_buff *skb)
{
struct tls_context *tls_ctx = tls_get_ctx(strp->sk);
struct tls_sw_context_rx *ctx = tls_sw_ctx_rx(tls_ctx);
char header[TLS_HEADER_SIZE + MAX_IV_SIZE];
struct strp_msg *rxm = strp_msg(skb);
size_t cipher_overhead;
size_t data_len = 0;
int ret;
/* Verify that we have a full TLS header, or wait for more data */
if (rxm->offset + tls_ctx->rx.prepend_size > skb->len)
return 0;
/* Sanity-check size of on-stack buffer. */
if (WARN_ON(tls_ctx->rx.prepend_size > sizeof(header))) {
ret = -EINVAL;
goto read_failure;
}
/* Linearize header to local buffer */
ret = skb_copy_bits(skb, rxm->offset, header, tls_ctx->rx.prepend_size);
if (ret < 0)
goto read_failure;
ctx->control = header[0];
data_len = ((header[4] & 0xFF) | (header[3] << 8));
cipher_overhead = tls_ctx->rx.tag_size + tls_ctx->rx.iv_size;
if (data_len > TLS_MAX_PAYLOAD_SIZE + cipher_overhead) {
ret = -EMSGSIZE;
goto read_failure;
}
if (data_len < cipher_overhead) {
ret = -EBADMSG;
goto read_failure;
}
if (header[1] != TLS_VERSION_MINOR(tls_ctx->crypto_recv.version) ||
header[2] != TLS_VERSION_MAJOR(tls_ctx->crypto_recv.version)) {
ret = -EINVAL;
goto read_failure;
}
#ifdef CONFIG_TLS_DEVICE
handle_device_resync(strp->sk, TCP_SKB_CB(skb)->seq + rxm->offset,
*(u64*)tls_ctx->rx.rec_seq);
#endif
return data_len + TLS_HEADER_SIZE;
read_failure:
tls_err_abort(strp->sk, ret);
return ret;
}
static void tls_queue(struct strparser *strp, struct sk_buff *skb)
{
struct tls_context *tls_ctx = tls_get_ctx(strp->sk);
struct tls_sw_context_rx *ctx = tls_sw_ctx_rx(tls_ctx);
ctx->decrypted = false;
ctx->recv_pkt = skb;
strp_pause(strp);
ctx->saved_data_ready(strp->sk);
}
static void tls_data_ready(struct sock *sk)
{
struct tls_context *tls_ctx = tls_get_ctx(sk);
struct tls_sw_context_rx *ctx = tls_sw_ctx_rx(tls_ctx);
strp_data_ready(&ctx->strp);
}
void tls_sw_free_resources_tx(struct sock *sk)
{
struct tls_context *tls_ctx = tls_get_ctx(sk);
struct tls_sw_context_tx *ctx = tls_sw_ctx_tx(tls_ctx);
crypto_free_aead(ctx->aead_send);
tls_free_both_sg(sk);
kfree(ctx);
}
void tls_sw_release_resources_rx(struct sock *sk)
{
struct tls_context *tls_ctx = tls_get_ctx(sk);
struct tls_sw_context_rx *ctx = tls_sw_ctx_rx(tls_ctx);
if (ctx->aead_recv) {
kfree_skb(ctx->recv_pkt);
ctx->recv_pkt = NULL;
crypto_free_aead(ctx->aead_recv);
strp_stop(&ctx->strp);
write_lock_bh(&sk->sk_callback_lock);
sk->sk_data_ready = ctx->saved_data_ready;
write_unlock_bh(&sk->sk_callback_lock);
release_sock(sk);
strp_done(&ctx->strp);
lock_sock(sk);
}
}
void tls_sw_free_resources_rx(struct sock *sk)
{
struct tls_context *tls_ctx = tls_get_ctx(sk);
struct tls_sw_context_rx *ctx = tls_sw_ctx_rx(tls_ctx);
tls_sw_release_resources_rx(sk);
kfree(ctx);
}
int tls_set_sw_offload(struct sock *sk, struct tls_context *ctx, int tx)
{
char keyval[TLS_CIPHER_AES_GCM_128_KEY_SIZE];
struct tls_crypto_info *crypto_info;
struct tls12_crypto_info_aes_gcm_128 *gcm_128_info;
struct tls_sw_context_tx *sw_ctx_tx = NULL;
struct tls_sw_context_rx *sw_ctx_rx = NULL;
struct cipher_context *cctx;
struct crypto_aead **aead;
struct strp_callbacks cb;
u16 nonce_size, tag_size, iv_size, rec_seq_size;
char *iv, *rec_seq;
int rc = 0;
if (!ctx) {
rc = -EINVAL;
goto out;
}
if (tx) {
if (!ctx->priv_ctx_tx) {
sw_ctx_tx = kzalloc(sizeof(*sw_ctx_tx), GFP_KERNEL);
if (!sw_ctx_tx) {
rc = -ENOMEM;
goto out;
}
ctx->priv_ctx_tx = sw_ctx_tx;
} else {
sw_ctx_tx =
(struct tls_sw_context_tx *)ctx->priv_ctx_tx;
}
} else {
if (!ctx->priv_ctx_rx) {
sw_ctx_rx = kzalloc(sizeof(*sw_ctx_rx), GFP_KERNEL);
if (!sw_ctx_rx) {
rc = -ENOMEM;
goto out;
}
ctx->priv_ctx_rx = sw_ctx_rx;
} else {
sw_ctx_rx =
(struct tls_sw_context_rx *)ctx->priv_ctx_rx;
}
}
if (tx) {
crypto_init_wait(&sw_ctx_tx->async_wait);
crypto_info = &ctx->crypto_send;
cctx = &ctx->tx;
aead = &sw_ctx_tx->aead_send;
} else {
crypto_init_wait(&sw_ctx_rx->async_wait);
crypto_info = &ctx->crypto_recv;
cctx = &ctx->rx;
aead = &sw_ctx_rx->aead_recv;
}
switch (crypto_info->cipher_type) {
case TLS_CIPHER_AES_GCM_128: {
nonce_size = TLS_CIPHER_AES_GCM_128_IV_SIZE;
tag_size = TLS_CIPHER_AES_GCM_128_TAG_SIZE;
iv_size = TLS_CIPHER_AES_GCM_128_IV_SIZE;
iv = ((struct tls12_crypto_info_aes_gcm_128 *)crypto_info)->iv;
rec_seq_size = TLS_CIPHER_AES_GCM_128_REC_SEQ_SIZE;
rec_seq =
((struct tls12_crypto_info_aes_gcm_128 *)crypto_info)->rec_seq;
gcm_128_info =
(struct tls12_crypto_info_aes_gcm_128 *)crypto_info;
break;
}
default:
rc = -EINVAL;
goto free_priv;
}
/* Sanity-check the IV size for stack allocations. */
if (iv_size > MAX_IV_SIZE || nonce_size > MAX_IV_SIZE) {
rc = -EINVAL;
goto free_priv;
}
cctx->prepend_size = TLS_HEADER_SIZE + nonce_size;
cctx->tag_size = tag_size;
cctx->overhead_size = cctx->prepend_size + cctx->tag_size;
cctx->iv_size = iv_size;
cctx->iv = kmalloc(iv_size + TLS_CIPHER_AES_GCM_128_SALT_SIZE,
GFP_KERNEL);
if (!cctx->iv) {
rc = -ENOMEM;
goto free_priv;
}
memcpy(cctx->iv, gcm_128_info->salt, TLS_CIPHER_AES_GCM_128_SALT_SIZE);
memcpy(cctx->iv + TLS_CIPHER_AES_GCM_128_SALT_SIZE, iv, iv_size);
cctx->rec_seq_size = rec_seq_size;
cctx->rec_seq = kmemdup(rec_seq, rec_seq_size, GFP_KERNEL);
if (!cctx->rec_seq) {
rc = -ENOMEM;
goto free_iv;
}
if (sw_ctx_tx) {
sg_init_table(sw_ctx_tx->sg_encrypted_data,
ARRAY_SIZE(sw_ctx_tx->sg_encrypted_data));
sg_init_table(sw_ctx_tx->sg_plaintext_data,
ARRAY_SIZE(sw_ctx_tx->sg_plaintext_data));
sg_init_table(sw_ctx_tx->sg_aead_in, 2);
sg_set_buf(&sw_ctx_tx->sg_aead_in[0], sw_ctx_tx->aad_space,
sizeof(sw_ctx_tx->aad_space));
sg_unmark_end(&sw_ctx_tx->sg_aead_in[1]);
sg_chain(sw_ctx_tx->sg_aead_in, 2,
sw_ctx_tx->sg_plaintext_data);
sg_init_table(sw_ctx_tx->sg_aead_out, 2);
sg_set_buf(&sw_ctx_tx->sg_aead_out[0], sw_ctx_tx->aad_space,
sizeof(sw_ctx_tx->aad_space));
sg_unmark_end(&sw_ctx_tx->sg_aead_out[1]);
sg_chain(sw_ctx_tx->sg_aead_out, 2,
sw_ctx_tx->sg_encrypted_data);
}
if (!*aead) {
*aead = crypto_alloc_aead("gcm(aes)", 0, 0);
if (IS_ERR(*aead)) {
rc = PTR_ERR(*aead);
*aead = NULL;
goto free_rec_seq;
}
}
ctx->push_pending_record = tls_sw_push_pending_record;
memcpy(keyval, gcm_128_info->key, TLS_CIPHER_AES_GCM_128_KEY_SIZE);
rc = crypto_aead_setkey(*aead, keyval,
TLS_CIPHER_AES_GCM_128_KEY_SIZE);
if (rc)
goto free_aead;
rc = crypto_aead_setauthsize(*aead, cctx->tag_size);
if (rc)
goto free_aead;
if (sw_ctx_rx) {
/* Set up strparser */
memset(&cb, 0, sizeof(cb));
cb.rcv_msg = tls_queue;
cb.parse_msg = tls_read_size;
strp_init(&sw_ctx_rx->strp, sk, &cb);
write_lock_bh(&sk->sk_callback_lock);
sw_ctx_rx->saved_data_ready = sk->sk_data_ready;
sk->sk_data_ready = tls_data_ready;
write_unlock_bh(&sk->sk_callback_lock);
sw_ctx_rx->sk_poll = sk->sk_socket->ops->poll;
strp_check_rcv(&sw_ctx_rx->strp);
}
goto out;
free_aead:
crypto_free_aead(*aead);
*aead = NULL;
free_rec_seq:
kfree(cctx->rec_seq);
cctx->rec_seq = NULL;
free_iv:
kfree(cctx->iv);
cctx->iv = NULL;
free_priv:
if (tx) {
kfree(ctx->priv_ctx_tx);
ctx->priv_ctx_tx = NULL;
} else {
kfree(ctx->priv_ctx_rx);
ctx->priv_ctx_rx = NULL;
}
out:
return rc;
}