linux_dsm_epyc7002/mm/shmem.c

4319 lines
111 KiB
C
Raw Normal View History

/*
* Resizable virtual memory filesystem for Linux.
*
* Copyright (C) 2000 Linus Torvalds.
* 2000 Transmeta Corp.
* 2000-2001 Christoph Rohland
* 2000-2001 SAP AG
* 2002 Red Hat Inc.
* Copyright (C) 2002-2011 Hugh Dickins.
* Copyright (C) 2011 Google Inc.
* Copyright (C) 2002-2005 VERITAS Software Corporation.
* Copyright (C) 2004 Andi Kleen, SuSE Labs
*
* Extended attribute support for tmpfs:
* Copyright (c) 2004, Luke Kenneth Casson Leighton <lkcl@lkcl.net>
* Copyright (c) 2004 Red Hat, Inc., James Morris <jmorris@redhat.com>
*
* tiny-shmem:
* Copyright (c) 2004, 2008 Matt Mackall <mpm@selenic.com>
*
* This file is released under the GPL.
*/
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/vfs.h>
#include <linux/mount.h>
#include <linux/ramfs.h>
#include <linux/pagemap.h>
#include <linux/file.h>
#include <linux/mm.h>
#include <linux/random.h>
#include <linux/sched/signal.h>
#include <linux/export.h>
#include <linux/swap.h>
#include <linux/uio.h>
khugepaged: add support of collapse for tmpfs/shmem pages This patch extends khugepaged to support collapse of tmpfs/shmem pages. We share fair amount of infrastructure with anon-THP collapse. Few design points: - First we are looking for VMA which can be suitable for mapping huge page; - If the VMA maps shmem file, the rest scan/collapse operations operates on page cache, not on page tables as in anon VMA case. - khugepaged_scan_shmem() finds a range which is suitable for huge page. The scan is lockless and shouldn't disturb system too much. - once the candidate for collapse is found, collapse_shmem() attempts to create a huge page: + scan over radix tree, making the range point to new huge page; + new huge page is not-uptodate, locked and freezed (refcount is 0), so nobody can touch them until we say so. + we swap in pages during the scan. khugepaged_scan_shmem() filters out ranges with more than khugepaged_max_ptes_swap swapped out pages. It's HPAGE_PMD_NR/8 by default. + old pages are isolated, unmapped and put to local list in case to be restored back if collapse failed. - if collapse succeed, we retract pte page tables from VMAs where huge pages mapping is possible. The huge page will be mapped as PMD on next minor fault into the range. Link: http://lkml.kernel.org/r/1466021202-61880-35-git-send-email-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 05:26:32 +07:00
#include <linux/khugepaged.h>
mm/shmem: add hugetlbfs support to memfd_create() This patch came out of discussions in this e-mail thread: http://lkml.kernel.org/r/1499357846-7481-1-git-send-email-mike.kravetz%40oracle.com The Oracle JVM team is developing a new garbage collection model. This new model requires multiple mappings of the same anonymous memory. One straight forward way to accomplish this is with memfd_create. They can use the returned fd to create multiple mappings of the same memory. The JVM today has an option to use (static hugetlb) huge pages. If this option is specified, they would like to use the same garbage collection model requiring multiple mappings to the same memory. Using hugetlbfs, it is possible to explicitly mount a filesystem and specify file paths in order to get an fd that can be used for multiple mappings. However, this introduces additional system admin work and coordination. Ideally they would like to get a hugetlbfs fd without requiring explicit mounting of a filesystem. Today, mmap and shmget can make use of hugetlbfs without explicitly mounting a filesystem. The patch adds this functionality to memfd_create. Add a new flag MFD_HUGETLB to memfd_create() that will specify the file to be created resides in the hugetlbfs filesystem. This is the generic hugetlbfs filesystem not associated with any specific mount point. As with other system calls that request hugetlbfs backed pages, there is the ability to encode huge page size in the flag arguments. hugetlbfs does not support sealing operations, therefore specifying MFD_ALLOW_SEALING with MFD_HUGETLB will result in EINVAL. Of course, the memfd_man page would need updating if this type of functionality moves forward. Link: http://lkml.kernel.org/r/1502149672-7759-2-git-send-email-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 06:24:16 +07:00
#include <linux/hugetlb.h>
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:03 +07:00
#include <linux/frontswap.h>
#include <linux/fs_parser.h>
#include <asm/tlbflush.h> /* for arch/microblaze update_mmu_cache() */
static struct vfsmount *shm_mnt;
#ifdef CONFIG_SHMEM
/*
* This virtual memory filesystem is heavily based on the ramfs. It
* extends ramfs by the ability to use swap and honor resource limits
* which makes it a completely usable filesystem.
*/
#include <linux/xattr.h>
#include <linux/exportfs.h>
#include <linux/posix_acl.h>
#include <linux/posix_acl_xattr.h>
#include <linux/mman.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/backing-dev.h>
#include <linux/shmem_fs.h>
#include <linux/writeback.h>
#include <linux/blkdev.h>
#include <linux/pagevec.h>
#include <linux/percpu_counter.h>
#include <linux/falloc.h>
#include <linux/splice.h>
#include <linux/security.h>
#include <linux/swapops.h>
#include <linux/mempolicy.h>
#include <linux/namei.h>
#include <linux/ctype.h>
#include <linux/migrate.h>
#include <linux/highmem.h>
#include <linux/seq_file.h>
#include <linux/magic.h>
#include <linux/syscalls.h>
shm: add sealing API If two processes share a common memory region, they usually want some guarantees to allow safe access. This often includes: - one side cannot overwrite data while the other reads it - one side cannot shrink the buffer while the other accesses it - one side cannot grow the buffer beyond previously set boundaries If there is a trust-relationship between both parties, there is no need for policy enforcement. However, if there's no trust relationship (eg., for general-purpose IPC) sharing memory-regions is highly fragile and often not possible without local copies. Look at the following two use-cases: 1) A graphics client wants to share its rendering-buffer with a graphics-server. The memory-region is allocated by the client for read/write access and a second FD is passed to the server. While scanning out from the memory region, the server has no guarantee that the client doesn't shrink the buffer at any time, requiring rather cumbersome SIGBUS handling. 2) A process wants to perform an RPC on another process. To avoid huge bandwidth consumption, zero-copy is preferred. After a message is assembled in-memory and a FD is passed to the remote side, both sides want to be sure that neither modifies this shared copy, anymore. The source may have put sensible data into the message without a separate copy and the target may want to parse the message inline, to avoid a local copy. While SIGBUS handling, POSIX mandatory locking and MAP_DENYWRITE provide ways to achieve most of this, the first one is unproportionally ugly to use in libraries and the latter two are broken/racy or even disabled due to denial of service attacks. This patch introduces the concept of SEALING. If you seal a file, a specific set of operations is blocked on that file forever. Unlike locks, seals can only be set, never removed. Hence, once you verified a specific set of seals is set, you're guaranteed that no-one can perform the blocked operations on this file, anymore. An initial set of SEALS is introduced by this patch: - SHRINK: If SEAL_SHRINK is set, the file in question cannot be reduced in size. This affects ftruncate() and open(O_TRUNC). - GROW: If SEAL_GROW is set, the file in question cannot be increased in size. This affects ftruncate(), fallocate() and write(). - WRITE: If SEAL_WRITE is set, no write operations (besides resizing) are possible. This affects fallocate(PUNCH_HOLE), mmap() and write(). - SEAL: If SEAL_SEAL is set, no further seals can be added to a file. This basically prevents the F_ADD_SEAL operation on a file and can be set to prevent others from adding further seals that you don't want. The described use-cases can easily use these seals to provide safe use without any trust-relationship: 1) The graphics server can verify that a passed file-descriptor has SEAL_SHRINK set. This allows safe scanout, while the client is allowed to increase buffer size for window-resizing on-the-fly. Concurrent writes are explicitly allowed. 2) For general-purpose IPC, both processes can verify that SEAL_SHRINK, SEAL_GROW and SEAL_WRITE are set. This guarantees that neither process can modify the data while the other side parses it. Furthermore, it guarantees that even with writable FDs passed to the peer, it cannot increase the size to hit memory-limits of the source process (in case the file-storage is accounted to the source). The new API is an extension to fcntl(), adding two new commands: F_GET_SEALS: Return a bitset describing the seals on the file. This can be called on any FD if the underlying file supports sealing. F_ADD_SEALS: Change the seals of a given file. This requires WRITE access to the file and F_SEAL_SEAL may not already be set. Furthermore, the underlying file must support sealing and there may not be any existing shared mapping of that file. Otherwise, EBADF/EPERM is returned. The given seals are _added_ to the existing set of seals on the file. You cannot remove seals again. The fcntl() handler is currently specific to shmem and disabled on all files. A file needs to explicitly support sealing for this interface to work. A separate syscall is added in a follow-up, which creates files that support sealing. There is no intention to support this on other file-systems. Semantics are unclear for non-volatile files and we lack any use-case right now. Therefore, the implementation is specific to shmem. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ryan Lortie <desrt@desrt.ca> Cc: Lennart Poettering <lennart@poettering.net> Cc: Daniel Mack <zonque@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 04:25:27 +07:00
#include <linux/fcntl.h>
#include <uapi/linux/memfd.h>
#include <linux/userfaultfd_k.h>
#include <linux/rmap.h>
#include <linux/uuid.h>
#include <linux/uaccess.h>
#include "internal.h"
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
#define BLOCKS_PER_PAGE (PAGE_SIZE/512)
#define VM_ACCT(size) (PAGE_ALIGN(size) >> PAGE_SHIFT)
/* Pretend that each entry is of this size in directory's i_size */
#define BOGO_DIRENT_SIZE 20
/* Symlink up to this size is kmalloc'ed instead of using a swappable page */
#define SHORT_SYMLINK_LEN 128
tmpfs: quit when fallocate fills memory As it stands, a large fallocate() on tmpfs is liable to fill memory with pages, freed on failure except when they run into swap, at which point they become fixed into the file despite the failure. That feels quite wrong, to be consuming resources precisely when they're in short supply. Go the other way instead: shmem_fallocate() indicate the range it has fallocated to shmem_writepage(), keeping count of pages it's allocating; shmem_writepage() reactivate instead of swapping out pages fallocated by this syscall (but happily swap out those from earlier occasions), keeping count; shmem_fallocate() compare counts and give up once the reactivated pages have started to coming back to writepage (approximately: some zones would in fact recycle faster than others). This is a little unusual, but works well: although we could consider the failure to swap as a bug, and fix it later with SWAP_MAP_FALLOC handling added in swapfile.c and memcontrol.c, I doubt that we shall ever want to. (If there's no swap, an over-large fallocate() on tmpfs is limited in the same way as writing: stopped by rlimit, or by tmpfs mount size if that was set sensibly, or by __vm_enough_memory() heuristics if OVERCOMMIT_GUESS or OVERCOMMIT_NEVER. If OVERCOMMIT_ALWAYS, then it is liable to OOM-kill others as writing would, but stops and frees if interrupted.) Now that everything is freed on failure, we can then skip updating ctime. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Cong Wang <amwang@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:42 +07:00
/*
* shmem_fallocate communicates with shmem_fault or shmem_writepage via
* inode->i_private (with i_mutex making sure that it has only one user at
* a time): we would prefer not to enlarge the shmem inode just for that.
tmpfs: quit when fallocate fills memory As it stands, a large fallocate() on tmpfs is liable to fill memory with pages, freed on failure except when they run into swap, at which point they become fixed into the file despite the failure. That feels quite wrong, to be consuming resources precisely when they're in short supply. Go the other way instead: shmem_fallocate() indicate the range it has fallocated to shmem_writepage(), keeping count of pages it's allocating; shmem_writepage() reactivate instead of swapping out pages fallocated by this syscall (but happily swap out those from earlier occasions), keeping count; shmem_fallocate() compare counts and give up once the reactivated pages have started to coming back to writepage (approximately: some zones would in fact recycle faster than others). This is a little unusual, but works well: although we could consider the failure to swap as a bug, and fix it later with SWAP_MAP_FALLOC handling added in swapfile.c and memcontrol.c, I doubt that we shall ever want to. (If there's no swap, an over-large fallocate() on tmpfs is limited in the same way as writing: stopped by rlimit, or by tmpfs mount size if that was set sensibly, or by __vm_enough_memory() heuristics if OVERCOMMIT_GUESS or OVERCOMMIT_NEVER. If OVERCOMMIT_ALWAYS, then it is liable to OOM-kill others as writing would, but stops and frees if interrupted.) Now that everything is freed on failure, we can then skip updating ctime. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Cong Wang <amwang@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:42 +07:00
*/
struct shmem_falloc {
shmem: fix faulting into a hole, not taking i_mutex Commit f00cdc6df7d7 ("shmem: fix faulting into a hole while it's punched") was buggy: Sasha sent a lockdep report to remind us that grabbing i_mutex in the fault path is a no-no (write syscall may already hold i_mutex while faulting user buffer). We tried a completely different approach (see following patch) but that proved inadequate: good enough for a rational workload, but not good enough against trinity - which forks off so many mappings of the object that contention on i_mmap_mutex while hole-puncher holds i_mutex builds into serious starvation when concurrent faults force the puncher to fall back to single-page unmap_mapping_range() searches of the i_mmap tree. So return to the original umbrella approach, but keep away from i_mutex this time. We really don't want to bloat every shmem inode with a new mutex or completion, just to protect this unlikely case from trinity. So extend the original with wait_queue_head on stack at the hole-punch end, and wait_queue item on the stack at the fault end. This involves further use of i_lock to guard against the races: lockdep has been happy so far, and I see fs/inode.c:unlock_new_inode() holds i_lock around wake_up_bit(), which is comparable to what we do here. i_lock is more convenient, but we could switch to shmem's info->lock. This issue has been tagged with CVE-2014-4171, which will require commit f00cdc6df7d7 and this and the following patch to be backported: we suggest to 3.1+, though in fact the trinity forkbomb effect might go back as far as 2.6.16, when madvise(,,MADV_REMOVE) came in - or might not, since much has changed, with i_mmap_mutex a spinlock before 3.0. Anyone running trinity on 3.0 and earlier? I don't think we need care. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lukas Czerner <lczerner@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: <stable@vger.kernel.org> [3.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-24 04:00:10 +07:00
wait_queue_head_t *waitq; /* faults into hole wait for punch to end */
tmpfs: quit when fallocate fills memory As it stands, a large fallocate() on tmpfs is liable to fill memory with pages, freed on failure except when they run into swap, at which point they become fixed into the file despite the failure. That feels quite wrong, to be consuming resources precisely when they're in short supply. Go the other way instead: shmem_fallocate() indicate the range it has fallocated to shmem_writepage(), keeping count of pages it's allocating; shmem_writepage() reactivate instead of swapping out pages fallocated by this syscall (but happily swap out those from earlier occasions), keeping count; shmem_fallocate() compare counts and give up once the reactivated pages have started to coming back to writepage (approximately: some zones would in fact recycle faster than others). This is a little unusual, but works well: although we could consider the failure to swap as a bug, and fix it later with SWAP_MAP_FALLOC handling added in swapfile.c and memcontrol.c, I doubt that we shall ever want to. (If there's no swap, an over-large fallocate() on tmpfs is limited in the same way as writing: stopped by rlimit, or by tmpfs mount size if that was set sensibly, or by __vm_enough_memory() heuristics if OVERCOMMIT_GUESS or OVERCOMMIT_NEVER. If OVERCOMMIT_ALWAYS, then it is liable to OOM-kill others as writing would, but stops and frees if interrupted.) Now that everything is freed on failure, we can then skip updating ctime. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Cong Wang <amwang@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:42 +07:00
pgoff_t start; /* start of range currently being fallocated */
pgoff_t next; /* the next page offset to be fallocated */
pgoff_t nr_falloced; /* how many new pages have been fallocated */
pgoff_t nr_unswapped; /* how often writepage refused to swap out */
};
struct shmem_options {
unsigned long long blocks;
unsigned long long inodes;
struct mempolicy *mpol;
kuid_t uid;
kgid_t gid;
umode_t mode;
bool full_inums;
int huge;
int seen;
#define SHMEM_SEEN_BLOCKS 1
#define SHMEM_SEEN_INODES 2
#define SHMEM_SEEN_HUGE 4
#define SHMEM_SEEN_INUMS 8
};
#ifdef CONFIG_TMPFS
static unsigned long shmem_default_max_blocks(void)
{
return totalram_pages() / 2;
}
static unsigned long shmem_default_max_inodes(void)
{
unsigned long nr_pages = totalram_pages();
return min(nr_pages - totalhigh_pages(), nr_pages / 2);
}
#endif
shmem: replace page if mapping excludes its zone The GMA500 GPU driver uses GEM shmem objects, but with a new twist: the backing RAM has to be below 4GB. Not a problem while the boards supported only 4GB: but now Intel's D2700MUD boards support 8GB, and their GMA3600 is managed by the GMA500 driver. shmem/tmpfs has never pretended to support hardware restrictions on the backing memory, but it might have appeared to do so before v3.1, and even now it works fine until a page is swapped out then back in. When read_cache_page_gfp() supplied a freshly allocated page for copy, that compensated for whatever choice might have been made by earlier swapin readahead; but swapoff was likely to destroy the illusion. We'd like to continue to support GMA500, so now add a new shmem_should_replace_page() check on the zone when about to move a page from swapcache to filecache (in swapin and swapoff cases), with shmem_replace_page() to allocate and substitute a suitable page (given gma500/gem.c's mapping_set_gfp_mask GFP_KERNEL | __GFP_DMA32). This does involve a minor extension to mem_cgroup_replace_page_cache() (the page may or may not have already been charged); and I've removed a comment and call to mem_cgroup_uncharge_cache_page(), which in fact is always a no-op while PageSwapCache. Also removed optimization of an unlikely path in shmem_getpage_gfp(), now that we need to check PageSwapCache more carefully (a racing caller might already have made the copy). And at one point shmem_unuse_inode() needs to use the hitherto private page_swapcount(), to guard against racing with inode eviction. It would make sense to extend shmem_should_replace_page(), to cover cpuset and NUMA mempolicy restrictions too, but set that aside for now: needs a cleanup of shmem mempolicy handling, and more testing, and ought to handle swap faults in do_swap_page() as well as shmem. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Stephane Marchesin <marcheu@chromium.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rob Clark <rob.clark@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:38 +07:00
static bool shmem_should_replace_page(struct page *page, gfp_t gfp);
static int shmem_replace_page(struct page **pagep, gfp_t gfp,
struct shmem_inode_info *info, pgoff_t index);
static int shmem_swapin_page(struct inode *inode, pgoff_t index,
struct page **pagep, enum sgp_type sgp,
gfp_t gfp, struct vm_area_struct *vma,
vm_fault_t *fault_type);
static int shmem_getpage_gfp(struct inode *inode, pgoff_t index,
struct page **pagep, enum sgp_type sgp,
gfp_t gfp, struct vm_area_struct *vma,
struct vm_fault *vmf, vm_fault_t *fault_type);
khugepaged: add support of collapse for tmpfs/shmem pages This patch extends khugepaged to support collapse of tmpfs/shmem pages. We share fair amount of infrastructure with anon-THP collapse. Few design points: - First we are looking for VMA which can be suitable for mapping huge page; - If the VMA maps shmem file, the rest scan/collapse operations operates on page cache, not on page tables as in anon VMA case. - khugepaged_scan_shmem() finds a range which is suitable for huge page. The scan is lockless and shouldn't disturb system too much. - once the candidate for collapse is found, collapse_shmem() attempts to create a huge page: + scan over radix tree, making the range point to new huge page; + new huge page is not-uptodate, locked and freezed (refcount is 0), so nobody can touch them until we say so. + we swap in pages during the scan. khugepaged_scan_shmem() filters out ranges with more than khugepaged_max_ptes_swap swapped out pages. It's HPAGE_PMD_NR/8 by default. + old pages are isolated, unmapped and put to local list in case to be restored back if collapse failed. - if collapse succeed, we retract pte page tables from VMAs where huge pages mapping is possible. The huge page will be mapped as PMD on next minor fault into the range. Link: http://lkml.kernel.org/r/1466021202-61880-35-git-send-email-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 05:26:32 +07:00
int shmem_getpage(struct inode *inode, pgoff_t index,
struct page **pagep, enum sgp_type sgp)
{
return shmem_getpage_gfp(inode, index, pagep, sgp,
mapping_gfp_mask(inode->i_mapping), NULL, NULL, NULL);
}
static inline struct shmem_sb_info *SHMEM_SB(struct super_block *sb)
{
return sb->s_fs_info;
}
/*
* shmem_file_setup pre-accounts the whole fixed size of a VM object,
* for shared memory and for shared anonymous (/dev/zero) mappings
* (unless MAP_NORESERVE and sysctl_overcommit_memory <= 1),
* consistent with the pre-accounting of private mappings ...
*/
static inline int shmem_acct_size(unsigned long flags, loff_t size)
{
return (flags & VM_NORESERVE) ?
0 : security_vm_enough_memory_mm(current->mm, VM_ACCT(size));
}
static inline void shmem_unacct_size(unsigned long flags, loff_t size)
{
if (!(flags & VM_NORESERVE))
vm_unacct_memory(VM_ACCT(size));
}
static inline int shmem_reacct_size(unsigned long flags,
loff_t oldsize, loff_t newsize)
{
if (!(flags & VM_NORESERVE)) {
if (VM_ACCT(newsize) > VM_ACCT(oldsize))
return security_vm_enough_memory_mm(current->mm,
VM_ACCT(newsize) - VM_ACCT(oldsize));
else if (VM_ACCT(newsize) < VM_ACCT(oldsize))
vm_unacct_memory(VM_ACCT(oldsize) - VM_ACCT(newsize));
}
return 0;
}
/*
* ... whereas tmpfs objects are accounted incrementally as
tmpfs: preliminary minor tidyups Make a few cleanups in mm/shmem.c, before going on to complicate it. shmem_alloc_page() will become more complicated: we can't afford to to have that complication duplicated between a CONFIG_NUMA version and a !CONFIG_NUMA version, so rearrange the #ifdef'ery there to yield a single shmem_swapin() and a single shmem_alloc_page(). Yes, it's a shame to inflict the horrid pseudo-vma on non-NUMA configurations, but eliminating it is a larger cleanup: I have an alloc_pages_mpol() patchset not yet ready - mpol handling is subtle and bug-prone, and changed yet again since my last version. Move __SetPageLocked, __SetPageSwapBacked from shmem_getpage_gfp() to shmem_alloc_page(): that SwapBacked flag will be useful in future, to help to distinguish different cases appropriately. And the SGP_DIRTY variant of SGP_CACHE is hard to understand and of little use (IIRC it dates back to when shmem_getpage() returned the page unlocked): kill it and do the necessary in shmem_file_read_iter(). But an arm64 build then complained that info may be uninitialized (where shmem_getpage_gfp() deletes a freshly alloced page beyond eof), and advancing to an "sgp <= SGP_CACHE" test jogged it back to reality. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Yang Shi <yang.shi@linaro.org> Cc: Ning Qu <quning@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 07:12:44 +07:00
* pages are allocated, in order to allow large sparse files.
* shmem_getpage reports shmem_acct_block failure as -ENOSPC not -ENOMEM,
* so that a failure on a sparse tmpfs mapping will give SIGBUS not OOM.
*/
static inline int shmem_acct_block(unsigned long flags, long pages)
{
if (!(flags & VM_NORESERVE))
return 0;
return security_vm_enough_memory_mm(current->mm,
pages * VM_ACCT(PAGE_SIZE));
}
static inline void shmem_unacct_blocks(unsigned long flags, long pages)
{
if (flags & VM_NORESERVE)
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
vm_unacct_memory(pages * VM_ACCT(PAGE_SIZE));
}
static inline bool shmem_inode_acct_block(struct inode *inode, long pages)
{
struct shmem_inode_info *info = SHMEM_I(inode);
struct shmem_sb_info *sbinfo = SHMEM_SB(inode->i_sb);
if (shmem_acct_block(info->flags, pages))
return false;
if (sbinfo->max_blocks) {
if (percpu_counter_compare(&sbinfo->used_blocks,
sbinfo->max_blocks - pages) > 0)
goto unacct;
percpu_counter_add(&sbinfo->used_blocks, pages);
}
return true;
unacct:
shmem_unacct_blocks(info->flags, pages);
return false;
}
static inline void shmem_inode_unacct_blocks(struct inode *inode, long pages)
{
struct shmem_inode_info *info = SHMEM_I(inode);
struct shmem_sb_info *sbinfo = SHMEM_SB(inode->i_sb);
if (sbinfo->max_blocks)
percpu_counter_sub(&sbinfo->used_blocks, pages);
shmem_unacct_blocks(info->flags, pages);
}
static const struct super_operations shmem_ops;
static const struct address_space_operations shmem_aops;
static const struct file_operations shmem_file_operations;
static const struct inode_operations shmem_inode_operations;
static const struct inode_operations shmem_dir_inode_operations;
static const struct inode_operations shmem_special_inode_operations;
static const struct vm_operations_struct shmem_vm_ops;
static struct file_system_type shmem_fs_type;
bool vma_is_shmem(struct vm_area_struct *vma)
{
return vma->vm_ops == &shmem_vm_ops;
}
static LIST_HEAD(shmem_swaplist);
static DEFINE_MUTEX(shmem_swaplist_mutex);
tmpfs: per-superblock i_ino support Patch series "tmpfs: inode: Reduce risk of inum overflow", v7. In Facebook production we are seeing heavy i_ino wraparounds on tmpfs. On affected tiers, in excess of 10% of hosts show multiple files with different content and the same inode number, with some servers even having as many as 150 duplicated inode numbers with differing file content. This causes actual, tangible problems in production. For example, we have complaints from those working on remote caches that their application is reporting cache corruptions because it uses (device, inodenum) to establish the identity of a particular cache object, but because it's not unique any more, the application refuses to continue and reports cache corruption. Even worse, sometimes applications may not even detect the corruption but may continue anyway, causing phantom and hard to debug behaviour. In general, userspace applications expect that (device, inodenum) should be enough to be uniquely point to one inode, which seems fair enough. One might also need to check the generation, but in this case: 1. That's not currently exposed to userspace (ioctl(...FS_IOC_GETVERSION...) returns ENOTTY on tmpfs); 2. Even with generation, there shouldn't be two live inodes with the same inode number on one device. In order to mitigate this, we take a two-pronged approach: 1. Moving inum generation from being global to per-sb for tmpfs. This itself allows some reduction in i_ino churn. This works on both 64- and 32- bit machines. 2. Adding inode{64,32} for tmpfs. This fix is supported on machines with 64-bit ino_t only: we allow users to mount tmpfs with a new inode64 option that uses the full width of ino_t, or CONFIG_TMPFS_INODE64. You can see how this compares to previous related patches which didn't implement this per-superblock: - https://patchwork.kernel.org/patch/11254001/ - https://patchwork.kernel.org/patch/11023915/ This patch (of 2): get_next_ino has a number of problems: - It uses and returns a uint, which is susceptible to become overflowed if a lot of volatile inodes that use get_next_ino are created. - It's global, with no specificity per-sb or even per-filesystem. This means it's not that difficult to cause inode number wraparounds on a single device, which can result in having multiple distinct inodes with the same inode number. This patch adds a per-superblock counter that mitigates the second case. This design also allows us to later have a specific i_ino size per-device, for example, allowing users to choose whether to use 32- or 64-bit inodes for each tmpfs mount. This is implemented in the next commit. For internal shmem mounts which may be less tolerant to spinlock delays, we implement a percpu batching scheme which only takes the stat_lock at each batch boundary. Signed-off-by: Chris Down <chris@chrisdown.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hugh Dickins <hughd@google.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/cover.1594661218.git.chris@chrisdown.name Link: http://lkml.kernel.org/r/1986b9d63b986f08ec07a4aa4b2275e718e47d8a.1594661218.git.chris@chrisdown.name Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 13:20:20 +07:00
/*
* shmem_reserve_inode() performs bookkeeping to reserve a shmem inode, and
* produces a novel ino for the newly allocated inode.
*
* It may also be called when making a hard link to permit the space needed by
* each dentry. However, in that case, no new inode number is needed since that
* internally draws from another pool of inode numbers (currently global
* get_next_ino()). This case is indicated by passing NULL as inop.
*/
#define SHMEM_INO_BATCH 1024
static int shmem_reserve_inode(struct super_block *sb, ino_t *inop)
{
struct shmem_sb_info *sbinfo = SHMEM_SB(sb);
tmpfs: per-superblock i_ino support Patch series "tmpfs: inode: Reduce risk of inum overflow", v7. In Facebook production we are seeing heavy i_ino wraparounds on tmpfs. On affected tiers, in excess of 10% of hosts show multiple files with different content and the same inode number, with some servers even having as many as 150 duplicated inode numbers with differing file content. This causes actual, tangible problems in production. For example, we have complaints from those working on remote caches that their application is reporting cache corruptions because it uses (device, inodenum) to establish the identity of a particular cache object, but because it's not unique any more, the application refuses to continue and reports cache corruption. Even worse, sometimes applications may not even detect the corruption but may continue anyway, causing phantom and hard to debug behaviour. In general, userspace applications expect that (device, inodenum) should be enough to be uniquely point to one inode, which seems fair enough. One might also need to check the generation, but in this case: 1. That's not currently exposed to userspace (ioctl(...FS_IOC_GETVERSION...) returns ENOTTY on tmpfs); 2. Even with generation, there shouldn't be two live inodes with the same inode number on one device. In order to mitigate this, we take a two-pronged approach: 1. Moving inum generation from being global to per-sb for tmpfs. This itself allows some reduction in i_ino churn. This works on both 64- and 32- bit machines. 2. Adding inode{64,32} for tmpfs. This fix is supported on machines with 64-bit ino_t only: we allow users to mount tmpfs with a new inode64 option that uses the full width of ino_t, or CONFIG_TMPFS_INODE64. You can see how this compares to previous related patches which didn't implement this per-superblock: - https://patchwork.kernel.org/patch/11254001/ - https://patchwork.kernel.org/patch/11023915/ This patch (of 2): get_next_ino has a number of problems: - It uses and returns a uint, which is susceptible to become overflowed if a lot of volatile inodes that use get_next_ino are created. - It's global, with no specificity per-sb or even per-filesystem. This means it's not that difficult to cause inode number wraparounds on a single device, which can result in having multiple distinct inodes with the same inode number. This patch adds a per-superblock counter that mitigates the second case. This design also allows us to later have a specific i_ino size per-device, for example, allowing users to choose whether to use 32- or 64-bit inodes for each tmpfs mount. This is implemented in the next commit. For internal shmem mounts which may be less tolerant to spinlock delays, we implement a percpu batching scheme which only takes the stat_lock at each batch boundary. Signed-off-by: Chris Down <chris@chrisdown.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hugh Dickins <hughd@google.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/cover.1594661218.git.chris@chrisdown.name Link: http://lkml.kernel.org/r/1986b9d63b986f08ec07a4aa4b2275e718e47d8a.1594661218.git.chris@chrisdown.name Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 13:20:20 +07:00
ino_t ino;
if (!(sb->s_flags & SB_KERNMOUNT)) {
spin_lock(&sbinfo->stat_lock);
if (!sbinfo->free_inodes) {
spin_unlock(&sbinfo->stat_lock);
return -ENOSPC;
}
sbinfo->free_inodes--;
tmpfs: per-superblock i_ino support Patch series "tmpfs: inode: Reduce risk of inum overflow", v7. In Facebook production we are seeing heavy i_ino wraparounds on tmpfs. On affected tiers, in excess of 10% of hosts show multiple files with different content and the same inode number, with some servers even having as many as 150 duplicated inode numbers with differing file content. This causes actual, tangible problems in production. For example, we have complaints from those working on remote caches that their application is reporting cache corruptions because it uses (device, inodenum) to establish the identity of a particular cache object, but because it's not unique any more, the application refuses to continue and reports cache corruption. Even worse, sometimes applications may not even detect the corruption but may continue anyway, causing phantom and hard to debug behaviour. In general, userspace applications expect that (device, inodenum) should be enough to be uniquely point to one inode, which seems fair enough. One might also need to check the generation, but in this case: 1. That's not currently exposed to userspace (ioctl(...FS_IOC_GETVERSION...) returns ENOTTY on tmpfs); 2. Even with generation, there shouldn't be two live inodes with the same inode number on one device. In order to mitigate this, we take a two-pronged approach: 1. Moving inum generation from being global to per-sb for tmpfs. This itself allows some reduction in i_ino churn. This works on both 64- and 32- bit machines. 2. Adding inode{64,32} for tmpfs. This fix is supported on machines with 64-bit ino_t only: we allow users to mount tmpfs with a new inode64 option that uses the full width of ino_t, or CONFIG_TMPFS_INODE64. You can see how this compares to previous related patches which didn't implement this per-superblock: - https://patchwork.kernel.org/patch/11254001/ - https://patchwork.kernel.org/patch/11023915/ This patch (of 2): get_next_ino has a number of problems: - It uses and returns a uint, which is susceptible to become overflowed if a lot of volatile inodes that use get_next_ino are created. - It's global, with no specificity per-sb or even per-filesystem. This means it's not that difficult to cause inode number wraparounds on a single device, which can result in having multiple distinct inodes with the same inode number. This patch adds a per-superblock counter that mitigates the second case. This design also allows us to later have a specific i_ino size per-device, for example, allowing users to choose whether to use 32- or 64-bit inodes for each tmpfs mount. This is implemented in the next commit. For internal shmem mounts which may be less tolerant to spinlock delays, we implement a percpu batching scheme which only takes the stat_lock at each batch boundary. Signed-off-by: Chris Down <chris@chrisdown.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hugh Dickins <hughd@google.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/cover.1594661218.git.chris@chrisdown.name Link: http://lkml.kernel.org/r/1986b9d63b986f08ec07a4aa4b2275e718e47d8a.1594661218.git.chris@chrisdown.name Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 13:20:20 +07:00
if (inop) {
ino = sbinfo->next_ino++;
if (unlikely(is_zero_ino(ino)))
ino = sbinfo->next_ino++;
if (unlikely(!sbinfo->full_inums &&
ino > UINT_MAX)) {
tmpfs: per-superblock i_ino support Patch series "tmpfs: inode: Reduce risk of inum overflow", v7. In Facebook production we are seeing heavy i_ino wraparounds on tmpfs. On affected tiers, in excess of 10% of hosts show multiple files with different content and the same inode number, with some servers even having as many as 150 duplicated inode numbers with differing file content. This causes actual, tangible problems in production. For example, we have complaints from those working on remote caches that their application is reporting cache corruptions because it uses (device, inodenum) to establish the identity of a particular cache object, but because it's not unique any more, the application refuses to continue and reports cache corruption. Even worse, sometimes applications may not even detect the corruption but may continue anyway, causing phantom and hard to debug behaviour. In general, userspace applications expect that (device, inodenum) should be enough to be uniquely point to one inode, which seems fair enough. One might also need to check the generation, but in this case: 1. That's not currently exposed to userspace (ioctl(...FS_IOC_GETVERSION...) returns ENOTTY on tmpfs); 2. Even with generation, there shouldn't be two live inodes with the same inode number on one device. In order to mitigate this, we take a two-pronged approach: 1. Moving inum generation from being global to per-sb for tmpfs. This itself allows some reduction in i_ino churn. This works on both 64- and 32- bit machines. 2. Adding inode{64,32} for tmpfs. This fix is supported on machines with 64-bit ino_t only: we allow users to mount tmpfs with a new inode64 option that uses the full width of ino_t, or CONFIG_TMPFS_INODE64. You can see how this compares to previous related patches which didn't implement this per-superblock: - https://patchwork.kernel.org/patch/11254001/ - https://patchwork.kernel.org/patch/11023915/ This patch (of 2): get_next_ino has a number of problems: - It uses and returns a uint, which is susceptible to become overflowed if a lot of volatile inodes that use get_next_ino are created. - It's global, with no specificity per-sb or even per-filesystem. This means it's not that difficult to cause inode number wraparounds on a single device, which can result in having multiple distinct inodes with the same inode number. This patch adds a per-superblock counter that mitigates the second case. This design also allows us to later have a specific i_ino size per-device, for example, allowing users to choose whether to use 32- or 64-bit inodes for each tmpfs mount. This is implemented in the next commit. For internal shmem mounts which may be less tolerant to spinlock delays, we implement a percpu batching scheme which only takes the stat_lock at each batch boundary. Signed-off-by: Chris Down <chris@chrisdown.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hugh Dickins <hughd@google.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/cover.1594661218.git.chris@chrisdown.name Link: http://lkml.kernel.org/r/1986b9d63b986f08ec07a4aa4b2275e718e47d8a.1594661218.git.chris@chrisdown.name Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 13:20:20 +07:00
/*
* Emulate get_next_ino uint wraparound for
* compatibility
*/
if (IS_ENABLED(CONFIG_64BIT))
pr_warn("%s: inode number overflow on device %d, consider using inode64 mount option\n",
__func__, MINOR(sb->s_dev));
sbinfo->next_ino = 1;
ino = sbinfo->next_ino++;
tmpfs: per-superblock i_ino support Patch series "tmpfs: inode: Reduce risk of inum overflow", v7. In Facebook production we are seeing heavy i_ino wraparounds on tmpfs. On affected tiers, in excess of 10% of hosts show multiple files with different content and the same inode number, with some servers even having as many as 150 duplicated inode numbers with differing file content. This causes actual, tangible problems in production. For example, we have complaints from those working on remote caches that their application is reporting cache corruptions because it uses (device, inodenum) to establish the identity of a particular cache object, but because it's not unique any more, the application refuses to continue and reports cache corruption. Even worse, sometimes applications may not even detect the corruption but may continue anyway, causing phantom and hard to debug behaviour. In general, userspace applications expect that (device, inodenum) should be enough to be uniquely point to one inode, which seems fair enough. One might also need to check the generation, but in this case: 1. That's not currently exposed to userspace (ioctl(...FS_IOC_GETVERSION...) returns ENOTTY on tmpfs); 2. Even with generation, there shouldn't be two live inodes with the same inode number on one device. In order to mitigate this, we take a two-pronged approach: 1. Moving inum generation from being global to per-sb for tmpfs. This itself allows some reduction in i_ino churn. This works on both 64- and 32- bit machines. 2. Adding inode{64,32} for tmpfs. This fix is supported on machines with 64-bit ino_t only: we allow users to mount tmpfs with a new inode64 option that uses the full width of ino_t, or CONFIG_TMPFS_INODE64. You can see how this compares to previous related patches which didn't implement this per-superblock: - https://patchwork.kernel.org/patch/11254001/ - https://patchwork.kernel.org/patch/11023915/ This patch (of 2): get_next_ino has a number of problems: - It uses and returns a uint, which is susceptible to become overflowed if a lot of volatile inodes that use get_next_ino are created. - It's global, with no specificity per-sb or even per-filesystem. This means it's not that difficult to cause inode number wraparounds on a single device, which can result in having multiple distinct inodes with the same inode number. This patch adds a per-superblock counter that mitigates the second case. This design also allows us to later have a specific i_ino size per-device, for example, allowing users to choose whether to use 32- or 64-bit inodes for each tmpfs mount. This is implemented in the next commit. For internal shmem mounts which may be less tolerant to spinlock delays, we implement a percpu batching scheme which only takes the stat_lock at each batch boundary. Signed-off-by: Chris Down <chris@chrisdown.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hugh Dickins <hughd@google.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/cover.1594661218.git.chris@chrisdown.name Link: http://lkml.kernel.org/r/1986b9d63b986f08ec07a4aa4b2275e718e47d8a.1594661218.git.chris@chrisdown.name Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 13:20:20 +07:00
}
*inop = ino;
}
spin_unlock(&sbinfo->stat_lock);
tmpfs: per-superblock i_ino support Patch series "tmpfs: inode: Reduce risk of inum overflow", v7. In Facebook production we are seeing heavy i_ino wraparounds on tmpfs. On affected tiers, in excess of 10% of hosts show multiple files with different content and the same inode number, with some servers even having as many as 150 duplicated inode numbers with differing file content. This causes actual, tangible problems in production. For example, we have complaints from those working on remote caches that their application is reporting cache corruptions because it uses (device, inodenum) to establish the identity of a particular cache object, but because it's not unique any more, the application refuses to continue and reports cache corruption. Even worse, sometimes applications may not even detect the corruption but may continue anyway, causing phantom and hard to debug behaviour. In general, userspace applications expect that (device, inodenum) should be enough to be uniquely point to one inode, which seems fair enough. One might also need to check the generation, but in this case: 1. That's not currently exposed to userspace (ioctl(...FS_IOC_GETVERSION...) returns ENOTTY on tmpfs); 2. Even with generation, there shouldn't be two live inodes with the same inode number on one device. In order to mitigate this, we take a two-pronged approach: 1. Moving inum generation from being global to per-sb for tmpfs. This itself allows some reduction in i_ino churn. This works on both 64- and 32- bit machines. 2. Adding inode{64,32} for tmpfs. This fix is supported on machines with 64-bit ino_t only: we allow users to mount tmpfs with a new inode64 option that uses the full width of ino_t, or CONFIG_TMPFS_INODE64. You can see how this compares to previous related patches which didn't implement this per-superblock: - https://patchwork.kernel.org/patch/11254001/ - https://patchwork.kernel.org/patch/11023915/ This patch (of 2): get_next_ino has a number of problems: - It uses and returns a uint, which is susceptible to become overflowed if a lot of volatile inodes that use get_next_ino are created. - It's global, with no specificity per-sb or even per-filesystem. This means it's not that difficult to cause inode number wraparounds on a single device, which can result in having multiple distinct inodes with the same inode number. This patch adds a per-superblock counter that mitigates the second case. This design also allows us to later have a specific i_ino size per-device, for example, allowing users to choose whether to use 32- or 64-bit inodes for each tmpfs mount. This is implemented in the next commit. For internal shmem mounts which may be less tolerant to spinlock delays, we implement a percpu batching scheme which only takes the stat_lock at each batch boundary. Signed-off-by: Chris Down <chris@chrisdown.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hugh Dickins <hughd@google.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/cover.1594661218.git.chris@chrisdown.name Link: http://lkml.kernel.org/r/1986b9d63b986f08ec07a4aa4b2275e718e47d8a.1594661218.git.chris@chrisdown.name Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 13:20:20 +07:00
} else if (inop) {
/*
* __shmem_file_setup, one of our callers, is lock-free: it
* doesn't hold stat_lock in shmem_reserve_inode since
* max_inodes is always 0, and is called from potentially
* unknown contexts. As such, use a per-cpu batched allocator
* which doesn't require the per-sb stat_lock unless we are at
* the batch boundary.
*
* We don't need to worry about inode{32,64} since SB_KERNMOUNT
* shmem mounts are not exposed to userspace, so we don't need
* to worry about things like glibc compatibility.
tmpfs: per-superblock i_ino support Patch series "tmpfs: inode: Reduce risk of inum overflow", v7. In Facebook production we are seeing heavy i_ino wraparounds on tmpfs. On affected tiers, in excess of 10% of hosts show multiple files with different content and the same inode number, with some servers even having as many as 150 duplicated inode numbers with differing file content. This causes actual, tangible problems in production. For example, we have complaints from those working on remote caches that their application is reporting cache corruptions because it uses (device, inodenum) to establish the identity of a particular cache object, but because it's not unique any more, the application refuses to continue and reports cache corruption. Even worse, sometimes applications may not even detect the corruption but may continue anyway, causing phantom and hard to debug behaviour. In general, userspace applications expect that (device, inodenum) should be enough to be uniquely point to one inode, which seems fair enough. One might also need to check the generation, but in this case: 1. That's not currently exposed to userspace (ioctl(...FS_IOC_GETVERSION...) returns ENOTTY on tmpfs); 2. Even with generation, there shouldn't be two live inodes with the same inode number on one device. In order to mitigate this, we take a two-pronged approach: 1. Moving inum generation from being global to per-sb for tmpfs. This itself allows some reduction in i_ino churn. This works on both 64- and 32- bit machines. 2. Adding inode{64,32} for tmpfs. This fix is supported on machines with 64-bit ino_t only: we allow users to mount tmpfs with a new inode64 option that uses the full width of ino_t, or CONFIG_TMPFS_INODE64. You can see how this compares to previous related patches which didn't implement this per-superblock: - https://patchwork.kernel.org/patch/11254001/ - https://patchwork.kernel.org/patch/11023915/ This patch (of 2): get_next_ino has a number of problems: - It uses and returns a uint, which is susceptible to become overflowed if a lot of volatile inodes that use get_next_ino are created. - It's global, with no specificity per-sb or even per-filesystem. This means it's not that difficult to cause inode number wraparounds on a single device, which can result in having multiple distinct inodes with the same inode number. This patch adds a per-superblock counter that mitigates the second case. This design also allows us to later have a specific i_ino size per-device, for example, allowing users to choose whether to use 32- or 64-bit inodes for each tmpfs mount. This is implemented in the next commit. For internal shmem mounts which may be less tolerant to spinlock delays, we implement a percpu batching scheme which only takes the stat_lock at each batch boundary. Signed-off-by: Chris Down <chris@chrisdown.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hugh Dickins <hughd@google.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/cover.1594661218.git.chris@chrisdown.name Link: http://lkml.kernel.org/r/1986b9d63b986f08ec07a4aa4b2275e718e47d8a.1594661218.git.chris@chrisdown.name Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 13:20:20 +07:00
*/
ino_t *next_ino;
next_ino = per_cpu_ptr(sbinfo->ino_batch, get_cpu());
ino = *next_ino;
if (unlikely(ino % SHMEM_INO_BATCH == 0)) {
spin_lock(&sbinfo->stat_lock);
ino = sbinfo->next_ino;
sbinfo->next_ino += SHMEM_INO_BATCH;
spin_unlock(&sbinfo->stat_lock);
if (unlikely(is_zero_ino(ino)))
ino++;
}
*inop = ino;
*next_ino = ++ino;
put_cpu();
}
tmpfs: per-superblock i_ino support Patch series "tmpfs: inode: Reduce risk of inum overflow", v7. In Facebook production we are seeing heavy i_ino wraparounds on tmpfs. On affected tiers, in excess of 10% of hosts show multiple files with different content and the same inode number, with some servers even having as many as 150 duplicated inode numbers with differing file content. This causes actual, tangible problems in production. For example, we have complaints from those working on remote caches that their application is reporting cache corruptions because it uses (device, inodenum) to establish the identity of a particular cache object, but because it's not unique any more, the application refuses to continue and reports cache corruption. Even worse, sometimes applications may not even detect the corruption but may continue anyway, causing phantom and hard to debug behaviour. In general, userspace applications expect that (device, inodenum) should be enough to be uniquely point to one inode, which seems fair enough. One might also need to check the generation, but in this case: 1. That's not currently exposed to userspace (ioctl(...FS_IOC_GETVERSION...) returns ENOTTY on tmpfs); 2. Even with generation, there shouldn't be two live inodes with the same inode number on one device. In order to mitigate this, we take a two-pronged approach: 1. Moving inum generation from being global to per-sb for tmpfs. This itself allows some reduction in i_ino churn. This works on both 64- and 32- bit machines. 2. Adding inode{64,32} for tmpfs. This fix is supported on machines with 64-bit ino_t only: we allow users to mount tmpfs with a new inode64 option that uses the full width of ino_t, or CONFIG_TMPFS_INODE64. You can see how this compares to previous related patches which didn't implement this per-superblock: - https://patchwork.kernel.org/patch/11254001/ - https://patchwork.kernel.org/patch/11023915/ This patch (of 2): get_next_ino has a number of problems: - It uses and returns a uint, which is susceptible to become overflowed if a lot of volatile inodes that use get_next_ino are created. - It's global, with no specificity per-sb or even per-filesystem. This means it's not that difficult to cause inode number wraparounds on a single device, which can result in having multiple distinct inodes with the same inode number. This patch adds a per-superblock counter that mitigates the second case. This design also allows us to later have a specific i_ino size per-device, for example, allowing users to choose whether to use 32- or 64-bit inodes for each tmpfs mount. This is implemented in the next commit. For internal shmem mounts which may be less tolerant to spinlock delays, we implement a percpu batching scheme which only takes the stat_lock at each batch boundary. Signed-off-by: Chris Down <chris@chrisdown.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hugh Dickins <hughd@google.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/cover.1594661218.git.chris@chrisdown.name Link: http://lkml.kernel.org/r/1986b9d63b986f08ec07a4aa4b2275e718e47d8a.1594661218.git.chris@chrisdown.name Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 13:20:20 +07:00
return 0;
}
static void shmem_free_inode(struct super_block *sb)
{
struct shmem_sb_info *sbinfo = SHMEM_SB(sb);
if (sbinfo->max_inodes) {
spin_lock(&sbinfo->stat_lock);
sbinfo->free_inodes++;
spin_unlock(&sbinfo->stat_lock);
}
}
/**
* shmem_recalc_inode - recalculate the block usage of an inode
* @inode: inode to recalc
*
* We have to calculate the free blocks since the mm can drop
* undirtied hole pages behind our back.
*
* But normally info->alloced == inode->i_mapping->nrpages + info->swapped
* So mm freed is info->alloced - (inode->i_mapping->nrpages + info->swapped)
*
* It has to be called with the spinlock held.
*/
static void shmem_recalc_inode(struct inode *inode)
{
struct shmem_inode_info *info = SHMEM_I(inode);
long freed;
freed = info->alloced - info->swapped - inode->i_mapping->nrpages;
if (freed > 0) {
info->alloced -= freed;
inode->i_blocks -= freed * BLOCKS_PER_PAGE;
shmem_inode_unacct_blocks(inode, freed);
}
}
bool shmem_charge(struct inode *inode, long pages)
{
struct shmem_inode_info *info = SHMEM_I(inode);
unsigned long flags;
if (!shmem_inode_acct_block(inode, pages))
return false;
mm/khugepaged: fix crashes due to misaccounted holes Huge tmpfs testing on a shortish file mapped into a pmd-rounded extent hit shmem_evict_inode()'s WARN_ON(inode->i_blocks) followed by clear_inode()'s BUG_ON(inode->i_data.nrpages) when the file was later closed and unlinked. khugepaged's collapse_shmem() was forgetting to update mapping->nrpages on the rollback path, after it had added but then needs to undo some holes. There is indeed an irritating asymmetry between shmem_charge(), whose callers want it to increment nrpages after successfully accounting blocks, and shmem_uncharge(), when __delete_from_page_cache() already decremented nrpages itself: oh well, just add a comment on that to them both. And shmem_recalc_inode() is supposed to be called when the accounting is expected to be in balance (so it can deduce from imbalance that reclaim discarded some pages): so change shmem_charge() to update nrpages earlier (though it's rare for the difference to matter at all). Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261523450.2275@eggly.anvils Fixes: 800d8c63b2e98 ("shmem: add huge pages support") Fixes: f3f0e1d2150b2 ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-01 05:10:29 +07:00
/* nrpages adjustment first, then shmem_recalc_inode() when balanced */
inode->i_mapping->nrpages += pages;
spin_lock_irqsave(&info->lock, flags);
info->alloced += pages;
inode->i_blocks += pages * BLOCKS_PER_PAGE;
shmem_recalc_inode(inode);
spin_unlock_irqrestore(&info->lock, flags);
return true;
}
void shmem_uncharge(struct inode *inode, long pages)
{
struct shmem_inode_info *info = SHMEM_I(inode);
unsigned long flags;
mm/khugepaged: fix crashes due to misaccounted holes Huge tmpfs testing on a shortish file mapped into a pmd-rounded extent hit shmem_evict_inode()'s WARN_ON(inode->i_blocks) followed by clear_inode()'s BUG_ON(inode->i_data.nrpages) when the file was later closed and unlinked. khugepaged's collapse_shmem() was forgetting to update mapping->nrpages on the rollback path, after it had added but then needs to undo some holes. There is indeed an irritating asymmetry between shmem_charge(), whose callers want it to increment nrpages after successfully accounting blocks, and shmem_uncharge(), when __delete_from_page_cache() already decremented nrpages itself: oh well, just add a comment on that to them both. And shmem_recalc_inode() is supposed to be called when the accounting is expected to be in balance (so it can deduce from imbalance that reclaim discarded some pages): so change shmem_charge() to update nrpages earlier (though it's rare for the difference to matter at all). Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261523450.2275@eggly.anvils Fixes: 800d8c63b2e98 ("shmem: add huge pages support") Fixes: f3f0e1d2150b2 ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-01 05:10:29 +07:00
/* nrpages adjustment done by __delete_from_page_cache() or caller */
spin_lock_irqsave(&info->lock, flags);
info->alloced -= pages;
inode->i_blocks -= pages * BLOCKS_PER_PAGE;
shmem_recalc_inode(inode);
spin_unlock_irqrestore(&info->lock, flags);
shmem_inode_unacct_blocks(inode, pages);
}
/*
* Replace item expected in xarray by a new item, while holding xa_lock.
*/
static int shmem_replace_entry(struct address_space *mapping,
pgoff_t index, void *expected, void *replacement)
{
XA_STATE(xas, &mapping->i_pages, index);
mm: shmem: save one radix tree lookup when truncating swapped pages Page cache radix tree slots are usually stabilized by the page lock, but shmem's swap cookies have no such thing. Because the overall truncation loop is lockless, the swap entry is currently confirmed by a tree lookup and then deleted by another tree lookup under the same tree lock region. Use radix_tree_delete_item() instead, which does the verification and deletion with only one lookup. This also allows removing the delete-only special case from shmem_radix_tree_replace(). Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 04:47:41 +07:00
void *item;
VM_BUG_ON(!expected);
mm: shmem: save one radix tree lookup when truncating swapped pages Page cache radix tree slots are usually stabilized by the page lock, but shmem's swap cookies have no such thing. Because the overall truncation loop is lockless, the swap entry is currently confirmed by a tree lookup and then deleted by another tree lookup under the same tree lock region. Use radix_tree_delete_item() instead, which does the verification and deletion with only one lookup. This also allows removing the delete-only special case from shmem_radix_tree_replace(). Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 04:47:41 +07:00
VM_BUG_ON(!replacement);
item = xas_load(&xas);
if (item != expected)
return -ENOENT;
xas_store(&xas, replacement);
return 0;
}
shmem: fix negative rss in memcg memory.stat When adding the page_private checks before calling shmem_replace_page(), I did realize that there is a further race, but thought it too unlikely to need a hurried fix. But independently I've been chasing why a mem cgroup's memory.stat sometimes shows negative rss after all tasks have gone: I expected it to be a stats gathering bug, but actually it's shmem swapping's fault. It's an old surprise, that when you lock_page(lookup_swap_cache(swap)), the page may have been removed from swapcache before getting the lock; or it may have been freed and reused and be back in swapcache; and it can even be using the same swap location as before (page_private same). The swapoff case is already secure against this (swap cannot be reused until the whole area has been swapped off, and a new swapped on); and shmem_getpage_gfp() is protected by shmem_add_to_page_cache()'s check for the expected radix_tree entry - but a little too late. By that time, we might have already decided to shmem_replace_page(): I don't know of a problem from that, but I'd feel more at ease not to do so spuriously. And we have already done mem_cgroup_cache_charge(), on perhaps the wrong mem cgroup: and this charge is not then undone on the error path, because PageSwapCache ends up preventing that. It's this last case which causes the occasional negative rss in memory.stat: the page is charged here as cache, but (sometimes) found to be anon when eventually it's uncharged - and in between, it's an undeserved charge on the wrong memcg. Fix this by adding an earlier check on the radix_tree entry: it's inelegant to descend the tree twice, but swapping is not the fast path, and a better solution would need a pair (try+commit) of memcg calls, and a rework of shmem_replace_page() to keep out of the swapcache. We can use the added shmem_confirm_swap() function to replace the find_get_page+page_cache_release we were already doing on the error path. And add a comment on that -EEXIST: it seems a peculiar errno to be using, but originates from its use in radix_tree_insert(). [It can be surprising to see positive rss left in a memcg's memory.stat after all tasks have gone, since it is supposed to count anonymous but not shmem. Aside from sharing anon pages via fork with a task in some other memcg, it often happens after swapping: because a swap page can't be freed while under writeback, nor while locked. So it's not an error, and these residual pages are easily freed once pressure demands.] Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-12 04:02:47 +07:00
/*
* Sometimes, before we decide whether to proceed or to fail, we must check
* that an entry was not already brought back from swap by a racing thread.
*
* Checking page is not enough: by the time a SwapCache page is locked, it
* might be reused, and again be SwapCache, using the same swap as before.
*/
static bool shmem_confirm_swap(struct address_space *mapping,
pgoff_t index, swp_entry_t swap)
{
return xa_load(&mapping->i_pages, index) == swp_to_radix_entry(swap);
shmem: fix negative rss in memcg memory.stat When adding the page_private checks before calling shmem_replace_page(), I did realize that there is a further race, but thought it too unlikely to need a hurried fix. But independently I've been chasing why a mem cgroup's memory.stat sometimes shows negative rss after all tasks have gone: I expected it to be a stats gathering bug, but actually it's shmem swapping's fault. It's an old surprise, that when you lock_page(lookup_swap_cache(swap)), the page may have been removed from swapcache before getting the lock; or it may have been freed and reused and be back in swapcache; and it can even be using the same swap location as before (page_private same). The swapoff case is already secure against this (swap cannot be reused until the whole area has been swapped off, and a new swapped on); and shmem_getpage_gfp() is protected by shmem_add_to_page_cache()'s check for the expected radix_tree entry - but a little too late. By that time, we might have already decided to shmem_replace_page(): I don't know of a problem from that, but I'd feel more at ease not to do so spuriously. And we have already done mem_cgroup_cache_charge(), on perhaps the wrong mem cgroup: and this charge is not then undone on the error path, because PageSwapCache ends up preventing that. It's this last case which causes the occasional negative rss in memory.stat: the page is charged here as cache, but (sometimes) found to be anon when eventually it's uncharged - and in between, it's an undeserved charge on the wrong memcg. Fix this by adding an earlier check on the radix_tree entry: it's inelegant to descend the tree twice, but swapping is not the fast path, and a better solution would need a pair (try+commit) of memcg calls, and a rework of shmem_replace_page() to keep out of the swapcache. We can use the added shmem_confirm_swap() function to replace the find_get_page+page_cache_release we were already doing on the error path. And add a comment on that -EEXIST: it seems a peculiar errno to be using, but originates from its use in radix_tree_insert(). [It can be surprising to see positive rss left in a memcg's memory.stat after all tasks have gone, since it is supposed to count anonymous but not shmem. Aside from sharing anon pages via fork with a task in some other memcg, it often happens after swapping: because a swap page can't be freed while under writeback, nor while locked. So it's not an error, and these residual pages are easily freed once pressure demands.] Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-12 04:02:47 +07:00
}
shmem: prepare huge= mount option and sysfs knob This patch adds new mount option "huge=". It can have following values: - "always": Attempt to allocate huge pages every time we need a new page; - "never": Do not allocate huge pages; - "within_size": Only allocate huge page if it will be fully within i_size. Also respect fadvise()/madvise() hints; - "advise: Only allocate huge pages if requested with fadvise()/madvise(); Default is "never" for now. "mount -o remount,huge= /mountpoint" works fine after mount: remounting huge=never will not attempt to break up huge pages at all, just stop more from being allocated. No new config option: put this under CONFIG_TRANSPARENT_HUGEPAGE, which is the appropriate option to protect those who don't want the new bloat, and with which we shall share some pmd code. Prohibit the option when !CONFIG_TRANSPARENT_HUGEPAGE, just as mpol is invalid without CONFIG_NUMA (was hidden in mpol_parse_str(): make it explicit). Allow enabling THP only if the machine has_transparent_hugepage(). But what about Shmem with no user-visible mount? SysV SHM, memfds, shared anonymous mmaps (of /dev/zero or MAP_ANONYMOUS), GPU drivers' DRM objects, Ashmem. Though unlikely to suit all usages, provide sysfs knob /sys/kernel/mm/transparent_hugepage/shmem_enabled to experiment with huge on those. And allow shmem_enabled two further values: - "deny": For use in emergencies, to force the huge option off from all mounts; - "force": Force the huge option on for all - very useful for testing; Based on patch by Hugh Dickins. Link: http://lkml.kernel.org/r/1466021202-61880-28-git-send-email-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 05:26:13 +07:00
/*
* Definitions for "huge tmpfs": tmpfs mounted with the huge= option
*
* SHMEM_HUGE_NEVER:
* disables huge pages for the mount;
* SHMEM_HUGE_ALWAYS:
* enables huge pages for the mount;
* SHMEM_HUGE_WITHIN_SIZE:
* only allocate huge pages if the page will be fully within i_size,
* also respect fadvise()/madvise() hints;
* SHMEM_HUGE_ADVISE:
* only allocate huge pages if requested with fadvise()/madvise();
*/
#define SHMEM_HUGE_NEVER 0
#define SHMEM_HUGE_ALWAYS 1
#define SHMEM_HUGE_WITHIN_SIZE 2
#define SHMEM_HUGE_ADVISE 3
/*
* Special values.
* Only can be set via /sys/kernel/mm/transparent_hugepage/shmem_enabled:
*
* SHMEM_HUGE_DENY:
* disables huge on shm_mnt and all mounts, for emergency use;
* SHMEM_HUGE_FORCE:
* enables huge on shm_mnt and all mounts, w/o needing option, for testing;
*
*/
#define SHMEM_HUGE_DENY (-1)
#define SHMEM_HUGE_FORCE (-2)
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
shmem: prepare huge= mount option and sysfs knob This patch adds new mount option "huge=". It can have following values: - "always": Attempt to allocate huge pages every time we need a new page; - "never": Do not allocate huge pages; - "within_size": Only allocate huge page if it will be fully within i_size. Also respect fadvise()/madvise() hints; - "advise: Only allocate huge pages if requested with fadvise()/madvise(); Default is "never" for now. "mount -o remount,huge= /mountpoint" works fine after mount: remounting huge=never will not attempt to break up huge pages at all, just stop more from being allocated. No new config option: put this under CONFIG_TRANSPARENT_HUGEPAGE, which is the appropriate option to protect those who don't want the new bloat, and with which we shall share some pmd code. Prohibit the option when !CONFIG_TRANSPARENT_HUGEPAGE, just as mpol is invalid without CONFIG_NUMA (was hidden in mpol_parse_str(): make it explicit). Allow enabling THP only if the machine has_transparent_hugepage(). But what about Shmem with no user-visible mount? SysV SHM, memfds, shared anonymous mmaps (of /dev/zero or MAP_ANONYMOUS), GPU drivers' DRM objects, Ashmem. Though unlikely to suit all usages, provide sysfs knob /sys/kernel/mm/transparent_hugepage/shmem_enabled to experiment with huge on those. And allow shmem_enabled two further values: - "deny": For use in emergencies, to force the huge option off from all mounts; - "force": Force the huge option on for all - very useful for testing; Based on patch by Hugh Dickins. Link: http://lkml.kernel.org/r/1466021202-61880-28-git-send-email-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 05:26:13 +07:00
/* ifdef here to avoid bloating shmem.o when not necessary */
static int shmem_huge __read_mostly;
shmem: prepare huge= mount option and sysfs knob This patch adds new mount option "huge=". It can have following values: - "always": Attempt to allocate huge pages every time we need a new page; - "never": Do not allocate huge pages; - "within_size": Only allocate huge page if it will be fully within i_size. Also respect fadvise()/madvise() hints; - "advise: Only allocate huge pages if requested with fadvise()/madvise(); Default is "never" for now. "mount -o remount,huge= /mountpoint" works fine after mount: remounting huge=never will not attempt to break up huge pages at all, just stop more from being allocated. No new config option: put this under CONFIG_TRANSPARENT_HUGEPAGE, which is the appropriate option to protect those who don't want the new bloat, and with which we shall share some pmd code. Prohibit the option when !CONFIG_TRANSPARENT_HUGEPAGE, just as mpol is invalid without CONFIG_NUMA (was hidden in mpol_parse_str(): make it explicit). Allow enabling THP only if the machine has_transparent_hugepage(). But what about Shmem with no user-visible mount? SysV SHM, memfds, shared anonymous mmaps (of /dev/zero or MAP_ANONYMOUS), GPU drivers' DRM objects, Ashmem. Though unlikely to suit all usages, provide sysfs knob /sys/kernel/mm/transparent_hugepage/shmem_enabled to experiment with huge on those. And allow shmem_enabled two further values: - "deny": For use in emergencies, to force the huge option off from all mounts; - "force": Force the huge option on for all - very useful for testing; Based on patch by Hugh Dickins. Link: http://lkml.kernel.org/r/1466021202-61880-28-git-send-email-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 05:26:13 +07:00
#if defined(CONFIG_SYSFS)
shmem: prepare huge= mount option and sysfs knob This patch adds new mount option "huge=". It can have following values: - "always": Attempt to allocate huge pages every time we need a new page; - "never": Do not allocate huge pages; - "within_size": Only allocate huge page if it will be fully within i_size. Also respect fadvise()/madvise() hints; - "advise: Only allocate huge pages if requested with fadvise()/madvise(); Default is "never" for now. "mount -o remount,huge= /mountpoint" works fine after mount: remounting huge=never will not attempt to break up huge pages at all, just stop more from being allocated. No new config option: put this under CONFIG_TRANSPARENT_HUGEPAGE, which is the appropriate option to protect those who don't want the new bloat, and with which we shall share some pmd code. Prohibit the option when !CONFIG_TRANSPARENT_HUGEPAGE, just as mpol is invalid without CONFIG_NUMA (was hidden in mpol_parse_str(): make it explicit). Allow enabling THP only if the machine has_transparent_hugepage(). But what about Shmem with no user-visible mount? SysV SHM, memfds, shared anonymous mmaps (of /dev/zero or MAP_ANONYMOUS), GPU drivers' DRM objects, Ashmem. Though unlikely to suit all usages, provide sysfs knob /sys/kernel/mm/transparent_hugepage/shmem_enabled to experiment with huge on those. And allow shmem_enabled two further values: - "deny": For use in emergencies, to force the huge option off from all mounts; - "force": Force the huge option on for all - very useful for testing; Based on patch by Hugh Dickins. Link: http://lkml.kernel.org/r/1466021202-61880-28-git-send-email-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 05:26:13 +07:00
static int shmem_parse_huge(const char *str)
{
if (!strcmp(str, "never"))
return SHMEM_HUGE_NEVER;
if (!strcmp(str, "always"))
return SHMEM_HUGE_ALWAYS;
if (!strcmp(str, "within_size"))
return SHMEM_HUGE_WITHIN_SIZE;
if (!strcmp(str, "advise"))
return SHMEM_HUGE_ADVISE;
if (!strcmp(str, "deny"))
return SHMEM_HUGE_DENY;
if (!strcmp(str, "force"))
return SHMEM_HUGE_FORCE;
return -EINVAL;
}
#endif
shmem: prepare huge= mount option and sysfs knob This patch adds new mount option "huge=". It can have following values: - "always": Attempt to allocate huge pages every time we need a new page; - "never": Do not allocate huge pages; - "within_size": Only allocate huge page if it will be fully within i_size. Also respect fadvise()/madvise() hints; - "advise: Only allocate huge pages if requested with fadvise()/madvise(); Default is "never" for now. "mount -o remount,huge= /mountpoint" works fine after mount: remounting huge=never will not attempt to break up huge pages at all, just stop more from being allocated. No new config option: put this under CONFIG_TRANSPARENT_HUGEPAGE, which is the appropriate option to protect those who don't want the new bloat, and with which we shall share some pmd code. Prohibit the option when !CONFIG_TRANSPARENT_HUGEPAGE, just as mpol is invalid without CONFIG_NUMA (was hidden in mpol_parse_str(): make it explicit). Allow enabling THP only if the machine has_transparent_hugepage(). But what about Shmem with no user-visible mount? SysV SHM, memfds, shared anonymous mmaps (of /dev/zero or MAP_ANONYMOUS), GPU drivers' DRM objects, Ashmem. Though unlikely to suit all usages, provide sysfs knob /sys/kernel/mm/transparent_hugepage/shmem_enabled to experiment with huge on those. And allow shmem_enabled two further values: - "deny": For use in emergencies, to force the huge option off from all mounts; - "force": Force the huge option on for all - very useful for testing; Based on patch by Hugh Dickins. Link: http://lkml.kernel.org/r/1466021202-61880-28-git-send-email-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 05:26:13 +07:00
#if defined(CONFIG_SYSFS) || defined(CONFIG_TMPFS)
shmem: prepare huge= mount option and sysfs knob This patch adds new mount option "huge=". It can have following values: - "always": Attempt to allocate huge pages every time we need a new page; - "never": Do not allocate huge pages; - "within_size": Only allocate huge page if it will be fully within i_size. Also respect fadvise()/madvise() hints; - "advise: Only allocate huge pages if requested with fadvise()/madvise(); Default is "never" for now. "mount -o remount,huge= /mountpoint" works fine after mount: remounting huge=never will not attempt to break up huge pages at all, just stop more from being allocated. No new config option: put this under CONFIG_TRANSPARENT_HUGEPAGE, which is the appropriate option to protect those who don't want the new bloat, and with which we shall share some pmd code. Prohibit the option when !CONFIG_TRANSPARENT_HUGEPAGE, just as mpol is invalid without CONFIG_NUMA (was hidden in mpol_parse_str(): make it explicit). Allow enabling THP only if the machine has_transparent_hugepage(). But what about Shmem with no user-visible mount? SysV SHM, memfds, shared anonymous mmaps (of /dev/zero or MAP_ANONYMOUS), GPU drivers' DRM objects, Ashmem. Though unlikely to suit all usages, provide sysfs knob /sys/kernel/mm/transparent_hugepage/shmem_enabled to experiment with huge on those. And allow shmem_enabled two further values: - "deny": For use in emergencies, to force the huge option off from all mounts; - "force": Force the huge option on for all - very useful for testing; Based on patch by Hugh Dickins. Link: http://lkml.kernel.org/r/1466021202-61880-28-git-send-email-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 05:26:13 +07:00
static const char *shmem_format_huge(int huge)
{
switch (huge) {
case SHMEM_HUGE_NEVER:
return "never";
case SHMEM_HUGE_ALWAYS:
return "always";
case SHMEM_HUGE_WITHIN_SIZE:
return "within_size";
case SHMEM_HUGE_ADVISE:
return "advise";
case SHMEM_HUGE_DENY:
return "deny";
case SHMEM_HUGE_FORCE:
return "force";
default:
VM_BUG_ON(1);
return "bad_val";
}
}
#endif
shmem: prepare huge= mount option and sysfs knob This patch adds new mount option "huge=". It can have following values: - "always": Attempt to allocate huge pages every time we need a new page; - "never": Do not allocate huge pages; - "within_size": Only allocate huge page if it will be fully within i_size. Also respect fadvise()/madvise() hints; - "advise: Only allocate huge pages if requested with fadvise()/madvise(); Default is "never" for now. "mount -o remount,huge= /mountpoint" works fine after mount: remounting huge=never will not attempt to break up huge pages at all, just stop more from being allocated. No new config option: put this under CONFIG_TRANSPARENT_HUGEPAGE, which is the appropriate option to protect those who don't want the new bloat, and with which we shall share some pmd code. Prohibit the option when !CONFIG_TRANSPARENT_HUGEPAGE, just as mpol is invalid without CONFIG_NUMA (was hidden in mpol_parse_str(): make it explicit). Allow enabling THP only if the machine has_transparent_hugepage(). But what about Shmem with no user-visible mount? SysV SHM, memfds, shared anonymous mmaps (of /dev/zero or MAP_ANONYMOUS), GPU drivers' DRM objects, Ashmem. Though unlikely to suit all usages, provide sysfs knob /sys/kernel/mm/transparent_hugepage/shmem_enabled to experiment with huge on those. And allow shmem_enabled two further values: - "deny": For use in emergencies, to force the huge option off from all mounts; - "force": Force the huge option on for all - very useful for testing; Based on patch by Hugh Dickins. Link: http://lkml.kernel.org/r/1466021202-61880-28-git-send-email-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 05:26:13 +07:00
static unsigned long shmem_unused_huge_shrink(struct shmem_sb_info *sbinfo,
struct shrink_control *sc, unsigned long nr_to_split)
{
LIST_HEAD(list), *pos, *next;
shmem: fix sleeping from atomic context Syzkaller fuzzer managed to trigger this: BUG: sleeping function called from invalid context at mm/shmem.c:852 in_atomic(): 1, irqs_disabled(): 0, pid: 529, name: khugepaged 3 locks held by khugepaged/529: #0: (shrinker_rwsem){++++..}, at: [<ffffffff818d7ef1>] shrink_slab.part.59+0x121/0xd30 mm/vmscan.c:451 #1: (&type->s_umount_key#29){++++..}, at: [<ffffffff81a63630>] trylock_super+0x20/0x100 fs/super.c:392 #2: (&(&sbinfo->shrinklist_lock)->rlock){+.+.-.}, at: [<ffffffff818fd83e>] spin_lock include/linux/spinlock.h:302 [inline] #2: (&(&sbinfo->shrinklist_lock)->rlock){+.+.-.}, at: [<ffffffff818fd83e>] shmem_unused_huge_shrink+0x28e/0x1490 mm/shmem.c:427 CPU: 2 PID: 529 Comm: khugepaged Not tainted 4.10.0-rc5+ #201 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: shmem_undo_range+0xb20/0x2710 mm/shmem.c:852 shmem_truncate_range+0x27/0xa0 mm/shmem.c:939 shmem_evict_inode+0x35f/0xca0 mm/shmem.c:1030 evict+0x46e/0x980 fs/inode.c:553 iput_final fs/inode.c:1515 [inline] iput+0x589/0xb20 fs/inode.c:1542 shmem_unused_huge_shrink+0xbad/0x1490 mm/shmem.c:446 shmem_unused_huge_scan+0x10c/0x170 mm/shmem.c:512 super_cache_scan+0x376/0x450 fs/super.c:106 do_shrink_slab mm/vmscan.c:378 [inline] shrink_slab.part.59+0x543/0xd30 mm/vmscan.c:481 shrink_slab mm/vmscan.c:2592 [inline] shrink_node+0x2c7/0x870 mm/vmscan.c:2592 shrink_zones mm/vmscan.c:2734 [inline] do_try_to_free_pages+0x369/0xc80 mm/vmscan.c:2776 try_to_free_pages+0x3c6/0x900 mm/vmscan.c:2982 __perform_reclaim mm/page_alloc.c:3301 [inline] __alloc_pages_direct_reclaim mm/page_alloc.c:3322 [inline] __alloc_pages_slowpath+0xa24/0x1c30 mm/page_alloc.c:3683 __alloc_pages_nodemask+0x544/0xae0 mm/page_alloc.c:3848 __alloc_pages include/linux/gfp.h:426 [inline] __alloc_pages_node include/linux/gfp.h:439 [inline] khugepaged_alloc_page+0xc2/0x1b0 mm/khugepaged.c:750 collapse_huge_page+0x182/0x1fe0 mm/khugepaged.c:955 khugepaged_scan_pmd+0xfdf/0x12a0 mm/khugepaged.c:1208 khugepaged_scan_mm_slot mm/khugepaged.c:1727 [inline] khugepaged_do_scan mm/khugepaged.c:1808 [inline] khugepaged+0xe9b/0x1590 mm/khugepaged.c:1853 kthread+0x326/0x3f0 kernel/kthread.c:227 ret_from_fork+0x31/0x40 arch/x86/entry/entry_64.S:430 The iput() from atomic context was a bad idea: if after igrab() somebody else calls iput() and we left with the last inode reference, our iput() would lead to inode eviction and therefore sleeping. This patch should fix the situation. Link: http://lkml.kernel.org/r/20170131093141.GA15899@node.shutemov.name Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-04 04:13:15 +07:00
LIST_HEAD(to_remove);
struct inode *inode;
struct shmem_inode_info *info;
struct page *page;
unsigned long batch = sc ? sc->nr_to_scan : 128;
int removed = 0, split = 0;
if (list_empty(&sbinfo->shrinklist))
return SHRINK_STOP;
spin_lock(&sbinfo->shrinklist_lock);
list_for_each_safe(pos, next, &sbinfo->shrinklist) {
info = list_entry(pos, struct shmem_inode_info, shrinklist);
/* pin the inode */
inode = igrab(&info->vfs_inode);
/* inode is about to be evicted */
if (!inode) {
list_del_init(&info->shrinklist);
removed++;
goto next;
}
/* Check if there's anything to gain */
if (round_up(inode->i_size, PAGE_SIZE) ==
round_up(inode->i_size, HPAGE_PMD_SIZE)) {
shmem: fix sleeping from atomic context Syzkaller fuzzer managed to trigger this: BUG: sleeping function called from invalid context at mm/shmem.c:852 in_atomic(): 1, irqs_disabled(): 0, pid: 529, name: khugepaged 3 locks held by khugepaged/529: #0: (shrinker_rwsem){++++..}, at: [<ffffffff818d7ef1>] shrink_slab.part.59+0x121/0xd30 mm/vmscan.c:451 #1: (&type->s_umount_key#29){++++..}, at: [<ffffffff81a63630>] trylock_super+0x20/0x100 fs/super.c:392 #2: (&(&sbinfo->shrinklist_lock)->rlock){+.+.-.}, at: [<ffffffff818fd83e>] spin_lock include/linux/spinlock.h:302 [inline] #2: (&(&sbinfo->shrinklist_lock)->rlock){+.+.-.}, at: [<ffffffff818fd83e>] shmem_unused_huge_shrink+0x28e/0x1490 mm/shmem.c:427 CPU: 2 PID: 529 Comm: khugepaged Not tainted 4.10.0-rc5+ #201 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: shmem_undo_range+0xb20/0x2710 mm/shmem.c:852 shmem_truncate_range+0x27/0xa0 mm/shmem.c:939 shmem_evict_inode+0x35f/0xca0 mm/shmem.c:1030 evict+0x46e/0x980 fs/inode.c:553 iput_final fs/inode.c:1515 [inline] iput+0x589/0xb20 fs/inode.c:1542 shmem_unused_huge_shrink+0xbad/0x1490 mm/shmem.c:446 shmem_unused_huge_scan+0x10c/0x170 mm/shmem.c:512 super_cache_scan+0x376/0x450 fs/super.c:106 do_shrink_slab mm/vmscan.c:378 [inline] shrink_slab.part.59+0x543/0xd30 mm/vmscan.c:481 shrink_slab mm/vmscan.c:2592 [inline] shrink_node+0x2c7/0x870 mm/vmscan.c:2592 shrink_zones mm/vmscan.c:2734 [inline] do_try_to_free_pages+0x369/0xc80 mm/vmscan.c:2776 try_to_free_pages+0x3c6/0x900 mm/vmscan.c:2982 __perform_reclaim mm/page_alloc.c:3301 [inline] __alloc_pages_direct_reclaim mm/page_alloc.c:3322 [inline] __alloc_pages_slowpath+0xa24/0x1c30 mm/page_alloc.c:3683 __alloc_pages_nodemask+0x544/0xae0 mm/page_alloc.c:3848 __alloc_pages include/linux/gfp.h:426 [inline] __alloc_pages_node include/linux/gfp.h:439 [inline] khugepaged_alloc_page+0xc2/0x1b0 mm/khugepaged.c:750 collapse_huge_page+0x182/0x1fe0 mm/khugepaged.c:955 khugepaged_scan_pmd+0xfdf/0x12a0 mm/khugepaged.c:1208 khugepaged_scan_mm_slot mm/khugepaged.c:1727 [inline] khugepaged_do_scan mm/khugepaged.c:1808 [inline] khugepaged+0xe9b/0x1590 mm/khugepaged.c:1853 kthread+0x326/0x3f0 kernel/kthread.c:227 ret_from_fork+0x31/0x40 arch/x86/entry/entry_64.S:430 The iput() from atomic context was a bad idea: if after igrab() somebody else calls iput() and we left with the last inode reference, our iput() would lead to inode eviction and therefore sleeping. This patch should fix the situation. Link: http://lkml.kernel.org/r/20170131093141.GA15899@node.shutemov.name Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-04 04:13:15 +07:00
list_move(&info->shrinklist, &to_remove);
removed++;
goto next;
}
list_move(&info->shrinklist, &list);
next:
if (!--batch)
break;
}
spin_unlock(&sbinfo->shrinklist_lock);
shmem: fix sleeping from atomic context Syzkaller fuzzer managed to trigger this: BUG: sleeping function called from invalid context at mm/shmem.c:852 in_atomic(): 1, irqs_disabled(): 0, pid: 529, name: khugepaged 3 locks held by khugepaged/529: #0: (shrinker_rwsem){++++..}, at: [<ffffffff818d7ef1>] shrink_slab.part.59+0x121/0xd30 mm/vmscan.c:451 #1: (&type->s_umount_key#29){++++..}, at: [<ffffffff81a63630>] trylock_super+0x20/0x100 fs/super.c:392 #2: (&(&sbinfo->shrinklist_lock)->rlock){+.+.-.}, at: [<ffffffff818fd83e>] spin_lock include/linux/spinlock.h:302 [inline] #2: (&(&sbinfo->shrinklist_lock)->rlock){+.+.-.}, at: [<ffffffff818fd83e>] shmem_unused_huge_shrink+0x28e/0x1490 mm/shmem.c:427 CPU: 2 PID: 529 Comm: khugepaged Not tainted 4.10.0-rc5+ #201 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: shmem_undo_range+0xb20/0x2710 mm/shmem.c:852 shmem_truncate_range+0x27/0xa0 mm/shmem.c:939 shmem_evict_inode+0x35f/0xca0 mm/shmem.c:1030 evict+0x46e/0x980 fs/inode.c:553 iput_final fs/inode.c:1515 [inline] iput+0x589/0xb20 fs/inode.c:1542 shmem_unused_huge_shrink+0xbad/0x1490 mm/shmem.c:446 shmem_unused_huge_scan+0x10c/0x170 mm/shmem.c:512 super_cache_scan+0x376/0x450 fs/super.c:106 do_shrink_slab mm/vmscan.c:378 [inline] shrink_slab.part.59+0x543/0xd30 mm/vmscan.c:481 shrink_slab mm/vmscan.c:2592 [inline] shrink_node+0x2c7/0x870 mm/vmscan.c:2592 shrink_zones mm/vmscan.c:2734 [inline] do_try_to_free_pages+0x369/0xc80 mm/vmscan.c:2776 try_to_free_pages+0x3c6/0x900 mm/vmscan.c:2982 __perform_reclaim mm/page_alloc.c:3301 [inline] __alloc_pages_direct_reclaim mm/page_alloc.c:3322 [inline] __alloc_pages_slowpath+0xa24/0x1c30 mm/page_alloc.c:3683 __alloc_pages_nodemask+0x544/0xae0 mm/page_alloc.c:3848 __alloc_pages include/linux/gfp.h:426 [inline] __alloc_pages_node include/linux/gfp.h:439 [inline] khugepaged_alloc_page+0xc2/0x1b0 mm/khugepaged.c:750 collapse_huge_page+0x182/0x1fe0 mm/khugepaged.c:955 khugepaged_scan_pmd+0xfdf/0x12a0 mm/khugepaged.c:1208 khugepaged_scan_mm_slot mm/khugepaged.c:1727 [inline] khugepaged_do_scan mm/khugepaged.c:1808 [inline] khugepaged+0xe9b/0x1590 mm/khugepaged.c:1853 kthread+0x326/0x3f0 kernel/kthread.c:227 ret_from_fork+0x31/0x40 arch/x86/entry/entry_64.S:430 The iput() from atomic context was a bad idea: if after igrab() somebody else calls iput() and we left with the last inode reference, our iput() would lead to inode eviction and therefore sleeping. This patch should fix the situation. Link: http://lkml.kernel.org/r/20170131093141.GA15899@node.shutemov.name Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-04 04:13:15 +07:00
list_for_each_safe(pos, next, &to_remove) {
info = list_entry(pos, struct shmem_inode_info, shrinklist);
inode = &info->vfs_inode;
list_del_init(&info->shrinklist);
iput(inode);
}
list_for_each_safe(pos, next, &list) {
int ret;
info = list_entry(pos, struct shmem_inode_info, shrinklist);
inode = &info->vfs_inode;
if (nr_to_split && split >= nr_to_split)
goto leave;
page = find_get_page(inode->i_mapping,
(inode->i_size & HPAGE_PMD_MASK) >> PAGE_SHIFT);
if (!page)
goto drop;
/* No huge page at the end of the file: nothing to split */
if (!PageTransHuge(page)) {
put_page(page);
goto drop;
}
/*
* Leave the inode on the list if we failed to lock
* the page at this time.
*
* Waiting for the lock may lead to deadlock in the
* reclaim path.
*/
if (!trylock_page(page)) {
put_page(page);
goto leave;
}
ret = split_huge_page(page);
unlock_page(page);
put_page(page);
/* If split failed leave the inode on the list */
if (ret)
goto leave;
split++;
drop:
list_del_init(&info->shrinklist);
removed++;
leave:
iput(inode);
}
spin_lock(&sbinfo->shrinklist_lock);
list_splice_tail(&list, &sbinfo->shrinklist);
sbinfo->shrinklist_len -= removed;
spin_unlock(&sbinfo->shrinklist_lock);
return split;
}
static long shmem_unused_huge_scan(struct super_block *sb,
struct shrink_control *sc)
{
struct shmem_sb_info *sbinfo = SHMEM_SB(sb);
if (!READ_ONCE(sbinfo->shrinklist_len))
return SHRINK_STOP;
return shmem_unused_huge_shrink(sbinfo, sc, 0);
}
static long shmem_unused_huge_count(struct super_block *sb,
struct shrink_control *sc)
{
struct shmem_sb_info *sbinfo = SHMEM_SB(sb);
return READ_ONCE(sbinfo->shrinklist_len);
}
#else /* !CONFIG_TRANSPARENT_HUGEPAGE */
shmem: prepare huge= mount option and sysfs knob This patch adds new mount option "huge=". It can have following values: - "always": Attempt to allocate huge pages every time we need a new page; - "never": Do not allocate huge pages; - "within_size": Only allocate huge page if it will be fully within i_size. Also respect fadvise()/madvise() hints; - "advise: Only allocate huge pages if requested with fadvise()/madvise(); Default is "never" for now. "mount -o remount,huge= /mountpoint" works fine after mount: remounting huge=never will not attempt to break up huge pages at all, just stop more from being allocated. No new config option: put this under CONFIG_TRANSPARENT_HUGEPAGE, which is the appropriate option to protect those who don't want the new bloat, and with which we shall share some pmd code. Prohibit the option when !CONFIG_TRANSPARENT_HUGEPAGE, just as mpol is invalid without CONFIG_NUMA (was hidden in mpol_parse_str(): make it explicit). Allow enabling THP only if the machine has_transparent_hugepage(). But what about Shmem with no user-visible mount? SysV SHM, memfds, shared anonymous mmaps (of /dev/zero or MAP_ANONYMOUS), GPU drivers' DRM objects, Ashmem. Though unlikely to suit all usages, provide sysfs knob /sys/kernel/mm/transparent_hugepage/shmem_enabled to experiment with huge on those. And allow shmem_enabled two further values: - "deny": For use in emergencies, to force the huge option off from all mounts; - "force": Force the huge option on for all - very useful for testing; Based on patch by Hugh Dickins. Link: http://lkml.kernel.org/r/1466021202-61880-28-git-send-email-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 05:26:13 +07:00
#define shmem_huge SHMEM_HUGE_DENY
static unsigned long shmem_unused_huge_shrink(struct shmem_sb_info *sbinfo,
struct shrink_control *sc, unsigned long nr_to_split)
{
return 0;
}
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
shmem: prepare huge= mount option and sysfs knob This patch adds new mount option "huge=". It can have following values: - "always": Attempt to allocate huge pages every time we need a new page; - "never": Do not allocate huge pages; - "within_size": Only allocate huge page if it will be fully within i_size. Also respect fadvise()/madvise() hints; - "advise: Only allocate huge pages if requested with fadvise()/madvise(); Default is "never" for now. "mount -o remount,huge= /mountpoint" works fine after mount: remounting huge=never will not attempt to break up huge pages at all, just stop more from being allocated. No new config option: put this under CONFIG_TRANSPARENT_HUGEPAGE, which is the appropriate option to protect those who don't want the new bloat, and with which we shall share some pmd code. Prohibit the option when !CONFIG_TRANSPARENT_HUGEPAGE, just as mpol is invalid without CONFIG_NUMA (was hidden in mpol_parse_str(): make it explicit). Allow enabling THP only if the machine has_transparent_hugepage(). But what about Shmem with no user-visible mount? SysV SHM, memfds, shared anonymous mmaps (of /dev/zero or MAP_ANONYMOUS), GPU drivers' DRM objects, Ashmem. Though unlikely to suit all usages, provide sysfs knob /sys/kernel/mm/transparent_hugepage/shmem_enabled to experiment with huge on those. And allow shmem_enabled two further values: - "deny": For use in emergencies, to force the huge option off from all mounts; - "force": Force the huge option on for all - very useful for testing; Based on patch by Hugh Dickins. Link: http://lkml.kernel.org/r/1466021202-61880-28-git-send-email-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 05:26:13 +07:00
mm: shmem: make stat.st_blksize return huge page size if THP is on Since tmpfs THP was supported in 4.8, hugetlbfs is not the only filesystem with huge page support anymore. tmpfs can use huge page via THP when mounting by "huge=" mount option. When applications use huge page on hugetlbfs, it just need check the filesystem magic number, but it is not enough for tmpfs. Make stat.st_blksize return huge page size if it is mounted by appropriate "huge=" option to give applications a hint to optimize the behavior with THP. Some applications may not do wisely with THP. For example, QEMU may mmap file on non huge page aligned hint address with MAP_FIXED, which results in no pages are PMD mapped even though THP is used. Some applications may mmap file with non huge page aligned offset. Both behaviors make THP pointless. statfs.f_bsize still returns 4KB for tmpfs since THP could be split, and it also may fallback to 4KB page silently if there is not enough huge page. Furthermore, different f_bsize makes max_blocks and free_blocks calculation harder but without too much benefit. Returning huge page size via stat.st_blksize sounds good enough. Since PUD size huge page for THP has not been supported, now it just returns HPAGE_PMD_SIZE. Hugh said: : Sorry, I have no enthusiasm for this patch; but do I feel strongly : enough to override you and everyone else to NAK it? No, I don't feel : that strongly, maybe st_blksize isn't worth arguing over. : : We did look at struct stat when designing huge tmpfs, to see if there : were any fields that should be adjusted for it; but concluded none. : Yes, it would sometimes be nice to have a quickly accessible indicator : for when tmpfs has been mounted huge (scanning /proc/mounts for options : can be tiresome, agreed); but since tmpfs tries to supply huge (or not) : pages transparently, no difference seemed right. : : So, because st_blksize is a not very useful field of struct stat, with : "size" in the name, we're going to put HPAGE_PMD_SIZE in there instead : of PAGE_SIZE, if the tmpfs was mounted with one of the huge "huge" : options (force or always, okay; within_size or advise, not so much). : Though HPAGE_PMD_SIZE is no more its "preferred I/O size" or "blocksize : for file system I/O" than PAGE_SIZE was. : : Which we can expect to speed up some applications and disadvantage : others, depending on how they interpret st_blksize: just like if we : changed it in the same way on non-huge tmpfs. (Did I actually try : changing st_blksize early on, and find it broke something? If so, I've : now forgotten what, and a search through commit messages didn't find : it; but I guess we'll find out soon enough.) : : If there were an mstat() syscall, returning a field "preferred : alignment", then we could certainly agree to put HPAGE_PMD_SIZE in : there; but in stat()'s st_blksize? And what happens when (in future) : mm maps this or that hard-disk filesystem's blocks with a pmd mapping - : should that filesystem then advertise a bigger st_blksize, despite the : same disk layout as before? What happens with DAX? : : And this change is not going to help the QEMU suboptimality that : brought you here (or does QEMU align mmaps according to st_blksize?). : QEMU ought to work well with kernels without this change, and kernels : with this change; and I hope it can easily deal with both by avoiding : that use of MAP_FIXED which prevented the kernel's intended alignment. [akpm@linux-foundation.org: remove unneeded `else'] Link: http://lkml.kernel.org/r/1524665633-83806-1-git-send-email-yang.shi@linux.alibaba.com Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Suggested-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-08 07:06:59 +07:00
static inline bool is_huge_enabled(struct shmem_sb_info *sbinfo)
{
if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE) &&
mm: shmem: make stat.st_blksize return huge page size if THP is on Since tmpfs THP was supported in 4.8, hugetlbfs is not the only filesystem with huge page support anymore. tmpfs can use huge page via THP when mounting by "huge=" mount option. When applications use huge page on hugetlbfs, it just need check the filesystem magic number, but it is not enough for tmpfs. Make stat.st_blksize return huge page size if it is mounted by appropriate "huge=" option to give applications a hint to optimize the behavior with THP. Some applications may not do wisely with THP. For example, QEMU may mmap file on non huge page aligned hint address with MAP_FIXED, which results in no pages are PMD mapped even though THP is used. Some applications may mmap file with non huge page aligned offset. Both behaviors make THP pointless. statfs.f_bsize still returns 4KB for tmpfs since THP could be split, and it also may fallback to 4KB page silently if there is not enough huge page. Furthermore, different f_bsize makes max_blocks and free_blocks calculation harder but without too much benefit. Returning huge page size via stat.st_blksize sounds good enough. Since PUD size huge page for THP has not been supported, now it just returns HPAGE_PMD_SIZE. Hugh said: : Sorry, I have no enthusiasm for this patch; but do I feel strongly : enough to override you and everyone else to NAK it? No, I don't feel : that strongly, maybe st_blksize isn't worth arguing over. : : We did look at struct stat when designing huge tmpfs, to see if there : were any fields that should be adjusted for it; but concluded none. : Yes, it would sometimes be nice to have a quickly accessible indicator : for when tmpfs has been mounted huge (scanning /proc/mounts for options : can be tiresome, agreed); but since tmpfs tries to supply huge (or not) : pages transparently, no difference seemed right. : : So, because st_blksize is a not very useful field of struct stat, with : "size" in the name, we're going to put HPAGE_PMD_SIZE in there instead : of PAGE_SIZE, if the tmpfs was mounted with one of the huge "huge" : options (force or always, okay; within_size or advise, not so much). : Though HPAGE_PMD_SIZE is no more its "preferred I/O size" or "blocksize : for file system I/O" than PAGE_SIZE was. : : Which we can expect to speed up some applications and disadvantage : others, depending on how they interpret st_blksize: just like if we : changed it in the same way on non-huge tmpfs. (Did I actually try : changing st_blksize early on, and find it broke something? If so, I've : now forgotten what, and a search through commit messages didn't find : it; but I guess we'll find out soon enough.) : : If there were an mstat() syscall, returning a field "preferred : alignment", then we could certainly agree to put HPAGE_PMD_SIZE in : there; but in stat()'s st_blksize? And what happens when (in future) : mm maps this or that hard-disk filesystem's blocks with a pmd mapping - : should that filesystem then advertise a bigger st_blksize, despite the : same disk layout as before? What happens with DAX? : : And this change is not going to help the QEMU suboptimality that : brought you here (or does QEMU align mmaps according to st_blksize?). : QEMU ought to work well with kernels without this change, and kernels : with this change; and I hope it can easily deal with both by avoiding : that use of MAP_FIXED which prevented the kernel's intended alignment. [akpm@linux-foundation.org: remove unneeded `else'] Link: http://lkml.kernel.org/r/1524665633-83806-1-git-send-email-yang.shi@linux.alibaba.com Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Suggested-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-08 07:06:59 +07:00
(shmem_huge == SHMEM_HUGE_FORCE || sbinfo->huge) &&
shmem_huge != SHMEM_HUGE_DENY)
return true;
return false;
}
/*
* Like add_to_page_cache_locked, but error if expected item has gone.
*/
static int shmem_add_to_page_cache(struct page *page,
struct address_space *mapping,
mm: memcontrol: convert page cache to a new mem_cgroup_charge() API The try/commit/cancel protocol that memcg uses dates back to when pages used to be uncharged upon removal from the page cache, and thus couldn't be committed before the insertion had succeeded. Nowadays, pages are uncharged when they are physically freed; it doesn't matter whether the insertion was successful or not. For the page cache, the transaction dance has become unnecessary. Introduce a mem_cgroup_charge() function that simply charges a newly allocated page to a cgroup and sets up page->mem_cgroup in one single step. If the insertion fails, the caller doesn't have to do anything but free/put the page. Then switch the page cache over to this new API. Subsequent patches will also convert anon pages, but it needs a bit more prep work. Right now, memcg depends on page->mapping being already set up at the time of charging, so that it can maintain its own MEMCG_CACHE and MEMCG_RSS counters. For anon, page->mapping is set under the same pte lock under which the page is publishd, so a single charge point that can block doesn't work there just yet. The following prep patches will replace the private memcg counters with the generic vmstat counters, thus removing the page->mapping dependency, then complete the transition to the new single-point charge API and delete the old transactional scheme. v2: leave shmem swapcache when charging fails to avoid double IO (Joonsoo) v3: rebase on preceeding shmem simplification patch Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Balbir Singh <bsingharora@gmail.com> Link: http://lkml.kernel.org/r/20200508183105.225460-6-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 06:01:41 +07:00
pgoff_t index, void *expected, gfp_t gfp,
struct mm_struct *charge_mm)
{
XA_STATE_ORDER(xas, &mapping->i_pages, index, compound_order(page));
unsigned long i = 0;
unsigned long nr = compound_nr(page);
mm: memcontrol: convert page cache to a new mem_cgroup_charge() API The try/commit/cancel protocol that memcg uses dates back to when pages used to be uncharged upon removal from the page cache, and thus couldn't be committed before the insertion had succeeded. Nowadays, pages are uncharged when they are physically freed; it doesn't matter whether the insertion was successful or not. For the page cache, the transaction dance has become unnecessary. Introduce a mem_cgroup_charge() function that simply charges a newly allocated page to a cgroup and sets up page->mem_cgroup in one single step. If the insertion fails, the caller doesn't have to do anything but free/put the page. Then switch the page cache over to this new API. Subsequent patches will also convert anon pages, but it needs a bit more prep work. Right now, memcg depends on page->mapping being already set up at the time of charging, so that it can maintain its own MEMCG_CACHE and MEMCG_RSS counters. For anon, page->mapping is set under the same pte lock under which the page is publishd, so a single charge point that can block doesn't work there just yet. The following prep patches will replace the private memcg counters with the generic vmstat counters, thus removing the page->mapping dependency, then complete the transition to the new single-point charge API and delete the old transactional scheme. v2: leave shmem swapcache when charging fails to avoid double IO (Joonsoo) v3: rebase on preceeding shmem simplification patch Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Balbir Singh <bsingharora@gmail.com> Link: http://lkml.kernel.org/r/20200508183105.225460-6-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 06:01:41 +07:00
int error;
VM_BUG_ON_PAGE(PageTail(page), page);
VM_BUG_ON_PAGE(index != round_down(index, nr), page);
VM_BUG_ON_PAGE(!PageLocked(page), page);
VM_BUG_ON_PAGE(!PageSwapBacked(page), page);
VM_BUG_ON(expected && PageTransHuge(page));
page_ref_add(page, nr);
page->mapping = mapping;
page->index = index;
mm: memcontrol: charge swapin pages on instantiation Right now, users that are otherwise memory controlled can easily escape their containment and allocate significant amounts of memory that they're not being charged for. That's because swap readahead pages are not being charged until somebody actually faults them into their page table. This can be exploited with MADV_WILLNEED, which triggers arbitrary readahead allocations without charging the pages. There are additional problems with the delayed charging of swap pages: 1. To implement refault/workingset detection for anonymous pages, we need to have a target LRU available at swapin time, but the LRU is not determinable until the page has been charged. 2. To implement per-cgroup LRU locking, we need page->mem_cgroup to be stable when the page is isolated from the LRU; otherwise, the locks change under us. But swapcache gets charged after it's already on the LRU, and even if we cannot isolate it ourselves (since charging is not exactly optional). The previous patch ensured we always maintain cgroup ownership records for swap pages. This patch moves the swapcache charging point from the fault handler to swapin time to fix all of the above problems. v2: simplify swapin error checking (Joonsoo) [hughd@google.com: fix livelock in __read_swap_cache_async()] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2005212246080.8458@eggly.anvils Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Alex Shi <alex.shi@linux.alibaba.com> Link: http://lkml.kernel.org/r/20200508183105.225460-17-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 06:02:17 +07:00
if (!PageSwapCache(page)) {
error = mem_cgroup_charge(page, charge_mm, gfp);
mm: memcontrol: charge swapin pages on instantiation Right now, users that are otherwise memory controlled can easily escape their containment and allocate significant amounts of memory that they're not being charged for. That's because swap readahead pages are not being charged until somebody actually faults them into their page table. This can be exploited with MADV_WILLNEED, which triggers arbitrary readahead allocations without charging the pages. There are additional problems with the delayed charging of swap pages: 1. To implement refault/workingset detection for anonymous pages, we need to have a target LRU available at swapin time, but the LRU is not determinable until the page has been charged. 2. To implement per-cgroup LRU locking, we need page->mem_cgroup to be stable when the page is isolated from the LRU; otherwise, the locks change under us. But swapcache gets charged after it's already on the LRU, and even if we cannot isolate it ourselves (since charging is not exactly optional). The previous patch ensured we always maintain cgroup ownership records for swap pages. This patch moves the swapcache charging point from the fault handler to swapin time to fix all of the above problems. v2: simplify swapin error checking (Joonsoo) [hughd@google.com: fix livelock in __read_swap_cache_async()] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2005212246080.8458@eggly.anvils Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Alex Shi <alex.shi@linux.alibaba.com> Link: http://lkml.kernel.org/r/20200508183105.225460-17-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 06:02:17 +07:00
if (error) {
if (PageTransHuge(page)) {
count_vm_event(THP_FILE_FALLBACK);
count_vm_event(THP_FILE_FALLBACK_CHARGE);
}
goto error;
mm: memcontrol: convert page cache to a new mem_cgroup_charge() API The try/commit/cancel protocol that memcg uses dates back to when pages used to be uncharged upon removal from the page cache, and thus couldn't be committed before the insertion had succeeded. Nowadays, pages are uncharged when they are physically freed; it doesn't matter whether the insertion was successful or not. For the page cache, the transaction dance has become unnecessary. Introduce a mem_cgroup_charge() function that simply charges a newly allocated page to a cgroup and sets up page->mem_cgroup in one single step. If the insertion fails, the caller doesn't have to do anything but free/put the page. Then switch the page cache over to this new API. Subsequent patches will also convert anon pages, but it needs a bit more prep work. Right now, memcg depends on page->mapping being already set up at the time of charging, so that it can maintain its own MEMCG_CACHE and MEMCG_RSS counters. For anon, page->mapping is set under the same pte lock under which the page is publishd, so a single charge point that can block doesn't work there just yet. The following prep patches will replace the private memcg counters with the generic vmstat counters, thus removing the page->mapping dependency, then complete the transition to the new single-point charge API and delete the old transactional scheme. v2: leave shmem swapcache when charging fails to avoid double IO (Joonsoo) v3: rebase on preceeding shmem simplification patch Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Balbir Singh <bsingharora@gmail.com> Link: http://lkml.kernel.org/r/20200508183105.225460-6-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 06:01:41 +07:00
}
}
cgroup_throttle_swaprate(page, gfp);
do {
void *entry;
xas_lock_irq(&xas);
entry = xas_find_conflict(&xas);
if (entry != expected)
xas_set_err(&xas, -EEXIST);
xas_create_range(&xas);
if (xas_error(&xas))
goto unlock;
next:
xas_store(&xas, page);
if (++i < nr) {
xas_next(&xas);
goto next;
}
if (PageTransHuge(page)) {
count_vm_event(THP_FILE_ALLOC);
__inc_node_page_state(page, NR_SHMEM_THPS);
}
mapping->nrpages += nr;
__mod_lruvec_page_state(page, NR_FILE_PAGES, nr);
__mod_lruvec_page_state(page, NR_SHMEM, nr);
unlock:
xas_unlock_irq(&xas);
} while (xas_nomem(&xas, gfp));
if (xas_error(&xas)) {
mm: memcontrol: convert page cache to a new mem_cgroup_charge() API The try/commit/cancel protocol that memcg uses dates back to when pages used to be uncharged upon removal from the page cache, and thus couldn't be committed before the insertion had succeeded. Nowadays, pages are uncharged when they are physically freed; it doesn't matter whether the insertion was successful or not. For the page cache, the transaction dance has become unnecessary. Introduce a mem_cgroup_charge() function that simply charges a newly allocated page to a cgroup and sets up page->mem_cgroup in one single step. If the insertion fails, the caller doesn't have to do anything but free/put the page. Then switch the page cache over to this new API. Subsequent patches will also convert anon pages, but it needs a bit more prep work. Right now, memcg depends on page->mapping being already set up at the time of charging, so that it can maintain its own MEMCG_CACHE and MEMCG_RSS counters. For anon, page->mapping is set under the same pte lock under which the page is publishd, so a single charge point that can block doesn't work there just yet. The following prep patches will replace the private memcg counters with the generic vmstat counters, thus removing the page->mapping dependency, then complete the transition to the new single-point charge API and delete the old transactional scheme. v2: leave shmem swapcache when charging fails to avoid double IO (Joonsoo) v3: rebase on preceeding shmem simplification patch Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Balbir Singh <bsingharora@gmail.com> Link: http://lkml.kernel.org/r/20200508183105.225460-6-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 06:01:41 +07:00
error = xas_error(&xas);
goto error;
}
return 0;
mm: memcontrol: convert page cache to a new mem_cgroup_charge() API The try/commit/cancel protocol that memcg uses dates back to when pages used to be uncharged upon removal from the page cache, and thus couldn't be committed before the insertion had succeeded. Nowadays, pages are uncharged when they are physically freed; it doesn't matter whether the insertion was successful or not. For the page cache, the transaction dance has become unnecessary. Introduce a mem_cgroup_charge() function that simply charges a newly allocated page to a cgroup and sets up page->mem_cgroup in one single step. If the insertion fails, the caller doesn't have to do anything but free/put the page. Then switch the page cache over to this new API. Subsequent patches will also convert anon pages, but it needs a bit more prep work. Right now, memcg depends on page->mapping being already set up at the time of charging, so that it can maintain its own MEMCG_CACHE and MEMCG_RSS counters. For anon, page->mapping is set under the same pte lock under which the page is publishd, so a single charge point that can block doesn't work there just yet. The following prep patches will replace the private memcg counters with the generic vmstat counters, thus removing the page->mapping dependency, then complete the transition to the new single-point charge API and delete the old transactional scheme. v2: leave shmem swapcache when charging fails to avoid double IO (Joonsoo) v3: rebase on preceeding shmem simplification patch Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Balbir Singh <bsingharora@gmail.com> Link: http://lkml.kernel.org/r/20200508183105.225460-6-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 06:01:41 +07:00
error:
page->mapping = NULL;
page_ref_sub(page, nr);
return error;
}
/*
* Like delete_from_page_cache, but substitutes swap for page.
*/
static void shmem_delete_from_page_cache(struct page *page, void *radswap)
{
struct address_space *mapping = page->mapping;
int error;
VM_BUG_ON_PAGE(PageCompound(page), page);
xa_lock_irq(&mapping->i_pages);
error = shmem_replace_entry(mapping, page->index, page, radswap);
page->mapping = NULL;
mapping->nrpages--;
__dec_lruvec_page_state(page, NR_FILE_PAGES);
__dec_lruvec_page_state(page, NR_SHMEM);
xa_unlock_irq(&mapping->i_pages);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
put_page(page);
BUG_ON(error);
}
/*
* Remove swap entry from page cache, free the swap and its page cache.
*/
static int shmem_free_swap(struct address_space *mapping,
pgoff_t index, void *radswap)
{
mm: shmem: save one radix tree lookup when truncating swapped pages Page cache radix tree slots are usually stabilized by the page lock, but shmem's swap cookies have no such thing. Because the overall truncation loop is lockless, the swap entry is currently confirmed by a tree lookup and then deleted by another tree lookup under the same tree lock region. Use radix_tree_delete_item() instead, which does the verification and deletion with only one lookup. This also allows removing the delete-only special case from shmem_radix_tree_replace(). Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 04:47:41 +07:00
void *old;
old = xa_cmpxchg_irq(&mapping->i_pages, index, radswap, NULL, 0);
mm: shmem: save one radix tree lookup when truncating swapped pages Page cache radix tree slots are usually stabilized by the page lock, but shmem's swap cookies have no such thing. Because the overall truncation loop is lockless, the swap entry is currently confirmed by a tree lookup and then deleted by another tree lookup under the same tree lock region. Use radix_tree_delete_item() instead, which does the verification and deletion with only one lookup. This also allows removing the delete-only special case from shmem_radix_tree_replace(). Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 04:47:41 +07:00
if (old != radswap)
return -ENOENT;
free_swap_and_cache(radix_to_swp_entry(radswap));
return 0;
}
mm, proc: reduce cost of /proc/pid/smaps for shmem mappings The previous patch has improved swap accounting for shmem mapping, which however made /proc/pid/smaps more expensive for shmem mappings, as we consult the radix tree for each pte_none entry, so the overal complexity is O(n*log(n)). We can reduce this significantly for mappings that cannot contain COWed pages, because then we can either use the statistics tha shmem object itself tracks (if the mapping contains the whole object, or the swap usage of the whole object is zero), or use the radix tree iterator, which is much more effective than repeated find_get_entry() calls. This patch therefore introduces a function shmem_swap_usage(vma) and makes /proc/pid/smaps use it when possible. Only for writable private mappings of shmem objects (i.e. tmpfs files) with the shmem object itself (partially) swapped outwe have to resort to the find_get_entry() approach. Hopefully such mappings are relatively uncommon. To demonstrate the diference, I have measured this on a process that creates a 2GB mapping and dirties single pages with a stride of 2MB, and time how long does it take to cat /proc/pid/smaps of this process 100 times. Private writable mapping of a /dev/shm/file (the most complex case): real 0m3.831s user 0m0.180s sys 0m3.212s Shared mapping of an almost full mapping of a partially swapped /dev/shm/file (which needs to employ the radix tree iterator). real 0m1.351s user 0m0.096s sys 0m0.768s Same, but with /dev/shm/file not swapped (so no radix tree walk needed) real 0m0.935s user 0m0.128s sys 0m0.344s Private anonymous mapping: real 0m0.949s user 0m0.116s sys 0m0.348s The cost is now much closer to the private anonymous mapping case, unless the shmem mapping is private and writable. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15 06:19:20 +07:00
/*
* Determine (in bytes) how many of the shmem object's pages mapped by the
* given offsets are swapped out.
mm, proc: reduce cost of /proc/pid/smaps for shmem mappings The previous patch has improved swap accounting for shmem mapping, which however made /proc/pid/smaps more expensive for shmem mappings, as we consult the radix tree for each pte_none entry, so the overal complexity is O(n*log(n)). We can reduce this significantly for mappings that cannot contain COWed pages, because then we can either use the statistics tha shmem object itself tracks (if the mapping contains the whole object, or the swap usage of the whole object is zero), or use the radix tree iterator, which is much more effective than repeated find_get_entry() calls. This patch therefore introduces a function shmem_swap_usage(vma) and makes /proc/pid/smaps use it when possible. Only for writable private mappings of shmem objects (i.e. tmpfs files) with the shmem object itself (partially) swapped outwe have to resort to the find_get_entry() approach. Hopefully such mappings are relatively uncommon. To demonstrate the diference, I have measured this on a process that creates a 2GB mapping and dirties single pages with a stride of 2MB, and time how long does it take to cat /proc/pid/smaps of this process 100 times. Private writable mapping of a /dev/shm/file (the most complex case): real 0m3.831s user 0m0.180s sys 0m3.212s Shared mapping of an almost full mapping of a partially swapped /dev/shm/file (which needs to employ the radix tree iterator). real 0m1.351s user 0m0.096s sys 0m0.768s Same, but with /dev/shm/file not swapped (so no radix tree walk needed) real 0m0.935s user 0m0.128s sys 0m0.344s Private anonymous mapping: real 0m0.949s user 0m0.116s sys 0m0.348s The cost is now much closer to the private anonymous mapping case, unless the shmem mapping is private and writable. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15 06:19:20 +07:00
*
* This is safe to call without i_mutex or the i_pages lock thanks to RCU,
mm, proc: reduce cost of /proc/pid/smaps for shmem mappings The previous patch has improved swap accounting for shmem mapping, which however made /proc/pid/smaps more expensive for shmem mappings, as we consult the radix tree for each pte_none entry, so the overal complexity is O(n*log(n)). We can reduce this significantly for mappings that cannot contain COWed pages, because then we can either use the statistics tha shmem object itself tracks (if the mapping contains the whole object, or the swap usage of the whole object is zero), or use the radix tree iterator, which is much more effective than repeated find_get_entry() calls. This patch therefore introduces a function shmem_swap_usage(vma) and makes /proc/pid/smaps use it when possible. Only for writable private mappings of shmem objects (i.e. tmpfs files) with the shmem object itself (partially) swapped outwe have to resort to the find_get_entry() approach. Hopefully such mappings are relatively uncommon. To demonstrate the diference, I have measured this on a process that creates a 2GB mapping and dirties single pages with a stride of 2MB, and time how long does it take to cat /proc/pid/smaps of this process 100 times. Private writable mapping of a /dev/shm/file (the most complex case): real 0m3.831s user 0m0.180s sys 0m3.212s Shared mapping of an almost full mapping of a partially swapped /dev/shm/file (which needs to employ the radix tree iterator). real 0m1.351s user 0m0.096s sys 0m0.768s Same, but with /dev/shm/file not swapped (so no radix tree walk needed) real 0m0.935s user 0m0.128s sys 0m0.344s Private anonymous mapping: real 0m0.949s user 0m0.116s sys 0m0.348s The cost is now much closer to the private anonymous mapping case, unless the shmem mapping is private and writable. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15 06:19:20 +07:00
* as long as the inode doesn't go away and racy results are not a problem.
*/
unsigned long shmem_partial_swap_usage(struct address_space *mapping,
pgoff_t start, pgoff_t end)
mm, proc: reduce cost of /proc/pid/smaps for shmem mappings The previous patch has improved swap accounting for shmem mapping, which however made /proc/pid/smaps more expensive for shmem mappings, as we consult the radix tree for each pte_none entry, so the overal complexity is O(n*log(n)). We can reduce this significantly for mappings that cannot contain COWed pages, because then we can either use the statistics tha shmem object itself tracks (if the mapping contains the whole object, or the swap usage of the whole object is zero), or use the radix tree iterator, which is much more effective than repeated find_get_entry() calls. This patch therefore introduces a function shmem_swap_usage(vma) and makes /proc/pid/smaps use it when possible. Only for writable private mappings of shmem objects (i.e. tmpfs files) with the shmem object itself (partially) swapped outwe have to resort to the find_get_entry() approach. Hopefully such mappings are relatively uncommon. To demonstrate the diference, I have measured this on a process that creates a 2GB mapping and dirties single pages with a stride of 2MB, and time how long does it take to cat /proc/pid/smaps of this process 100 times. Private writable mapping of a /dev/shm/file (the most complex case): real 0m3.831s user 0m0.180s sys 0m3.212s Shared mapping of an almost full mapping of a partially swapped /dev/shm/file (which needs to employ the radix tree iterator). real 0m1.351s user 0m0.096s sys 0m0.768s Same, but with /dev/shm/file not swapped (so no radix tree walk needed) real 0m0.935s user 0m0.128s sys 0m0.344s Private anonymous mapping: real 0m0.949s user 0m0.116s sys 0m0.348s The cost is now much closer to the private anonymous mapping case, unless the shmem mapping is private and writable. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15 06:19:20 +07:00
{
XA_STATE(xas, &mapping->i_pages, start);
mm, proc: reduce cost of /proc/pid/smaps for shmem mappings The previous patch has improved swap accounting for shmem mapping, which however made /proc/pid/smaps more expensive for shmem mappings, as we consult the radix tree for each pte_none entry, so the overal complexity is O(n*log(n)). We can reduce this significantly for mappings that cannot contain COWed pages, because then we can either use the statistics tha shmem object itself tracks (if the mapping contains the whole object, or the swap usage of the whole object is zero), or use the radix tree iterator, which is much more effective than repeated find_get_entry() calls. This patch therefore introduces a function shmem_swap_usage(vma) and makes /proc/pid/smaps use it when possible. Only for writable private mappings of shmem objects (i.e. tmpfs files) with the shmem object itself (partially) swapped outwe have to resort to the find_get_entry() approach. Hopefully such mappings are relatively uncommon. To demonstrate the diference, I have measured this on a process that creates a 2GB mapping and dirties single pages with a stride of 2MB, and time how long does it take to cat /proc/pid/smaps of this process 100 times. Private writable mapping of a /dev/shm/file (the most complex case): real 0m3.831s user 0m0.180s sys 0m3.212s Shared mapping of an almost full mapping of a partially swapped /dev/shm/file (which needs to employ the radix tree iterator). real 0m1.351s user 0m0.096s sys 0m0.768s Same, but with /dev/shm/file not swapped (so no radix tree walk needed) real 0m0.935s user 0m0.128s sys 0m0.344s Private anonymous mapping: real 0m0.949s user 0m0.116s sys 0m0.348s The cost is now much closer to the private anonymous mapping case, unless the shmem mapping is private and writable. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15 06:19:20 +07:00
struct page *page;
unsigned long swapped = 0;
mm, proc: reduce cost of /proc/pid/smaps for shmem mappings The previous patch has improved swap accounting for shmem mapping, which however made /proc/pid/smaps more expensive for shmem mappings, as we consult the radix tree for each pte_none entry, so the overal complexity is O(n*log(n)). We can reduce this significantly for mappings that cannot contain COWed pages, because then we can either use the statistics tha shmem object itself tracks (if the mapping contains the whole object, or the swap usage of the whole object is zero), or use the radix tree iterator, which is much more effective than repeated find_get_entry() calls. This patch therefore introduces a function shmem_swap_usage(vma) and makes /proc/pid/smaps use it when possible. Only for writable private mappings of shmem objects (i.e. tmpfs files) with the shmem object itself (partially) swapped outwe have to resort to the find_get_entry() approach. Hopefully such mappings are relatively uncommon. To demonstrate the diference, I have measured this on a process that creates a 2GB mapping and dirties single pages with a stride of 2MB, and time how long does it take to cat /proc/pid/smaps of this process 100 times. Private writable mapping of a /dev/shm/file (the most complex case): real 0m3.831s user 0m0.180s sys 0m3.212s Shared mapping of an almost full mapping of a partially swapped /dev/shm/file (which needs to employ the radix tree iterator). real 0m1.351s user 0m0.096s sys 0m0.768s Same, but with /dev/shm/file not swapped (so no radix tree walk needed) real 0m0.935s user 0m0.128s sys 0m0.344s Private anonymous mapping: real 0m0.949s user 0m0.116s sys 0m0.348s The cost is now much closer to the private anonymous mapping case, unless the shmem mapping is private and writable. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15 06:19:20 +07:00
rcu_read_lock();
xas_for_each(&xas, page, end - 1) {
if (xas_retry(&xas, page))
continue;
if (xa_is_value(page))
mm, proc: reduce cost of /proc/pid/smaps for shmem mappings The previous patch has improved swap accounting for shmem mapping, which however made /proc/pid/smaps more expensive for shmem mappings, as we consult the radix tree for each pte_none entry, so the overal complexity is O(n*log(n)). We can reduce this significantly for mappings that cannot contain COWed pages, because then we can either use the statistics tha shmem object itself tracks (if the mapping contains the whole object, or the swap usage of the whole object is zero), or use the radix tree iterator, which is much more effective than repeated find_get_entry() calls. This patch therefore introduces a function shmem_swap_usage(vma) and makes /proc/pid/smaps use it when possible. Only for writable private mappings of shmem objects (i.e. tmpfs files) with the shmem object itself (partially) swapped outwe have to resort to the find_get_entry() approach. Hopefully such mappings are relatively uncommon. To demonstrate the diference, I have measured this on a process that creates a 2GB mapping and dirties single pages with a stride of 2MB, and time how long does it take to cat /proc/pid/smaps of this process 100 times. Private writable mapping of a /dev/shm/file (the most complex case): real 0m3.831s user 0m0.180s sys 0m3.212s Shared mapping of an almost full mapping of a partially swapped /dev/shm/file (which needs to employ the radix tree iterator). real 0m1.351s user 0m0.096s sys 0m0.768s Same, but with /dev/shm/file not swapped (so no radix tree walk needed) real 0m0.935s user 0m0.128s sys 0m0.344s Private anonymous mapping: real 0m0.949s user 0m0.116s sys 0m0.348s The cost is now much closer to the private anonymous mapping case, unless the shmem mapping is private and writable. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15 06:19:20 +07:00
swapped++;
if (need_resched()) {
xas_pause(&xas);
mm, proc: reduce cost of /proc/pid/smaps for shmem mappings The previous patch has improved swap accounting for shmem mapping, which however made /proc/pid/smaps more expensive for shmem mappings, as we consult the radix tree for each pte_none entry, so the overal complexity is O(n*log(n)). We can reduce this significantly for mappings that cannot contain COWed pages, because then we can either use the statistics tha shmem object itself tracks (if the mapping contains the whole object, or the swap usage of the whole object is zero), or use the radix tree iterator, which is much more effective than repeated find_get_entry() calls. This patch therefore introduces a function shmem_swap_usage(vma) and makes /proc/pid/smaps use it when possible. Only for writable private mappings of shmem objects (i.e. tmpfs files) with the shmem object itself (partially) swapped outwe have to resort to the find_get_entry() approach. Hopefully such mappings are relatively uncommon. To demonstrate the diference, I have measured this on a process that creates a 2GB mapping and dirties single pages with a stride of 2MB, and time how long does it take to cat /proc/pid/smaps of this process 100 times. Private writable mapping of a /dev/shm/file (the most complex case): real 0m3.831s user 0m0.180s sys 0m3.212s Shared mapping of an almost full mapping of a partially swapped /dev/shm/file (which needs to employ the radix tree iterator). real 0m1.351s user 0m0.096s sys 0m0.768s Same, but with /dev/shm/file not swapped (so no radix tree walk needed) real 0m0.935s user 0m0.128s sys 0m0.344s Private anonymous mapping: real 0m0.949s user 0m0.116s sys 0m0.348s The cost is now much closer to the private anonymous mapping case, unless the shmem mapping is private and writable. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15 06:19:20 +07:00
cond_resched_rcu();
}
}
rcu_read_unlock();
return swapped << PAGE_SHIFT;
}
/*
* Determine (in bytes) how many of the shmem object's pages mapped by the
* given vma is swapped out.
*
* This is safe to call without i_mutex or the i_pages lock thanks to RCU,
* as long as the inode doesn't go away and racy results are not a problem.
*/
unsigned long shmem_swap_usage(struct vm_area_struct *vma)
{
struct inode *inode = file_inode(vma->vm_file);
struct shmem_inode_info *info = SHMEM_I(inode);
struct address_space *mapping = inode->i_mapping;
unsigned long swapped;
/* Be careful as we don't hold info->lock */
swapped = READ_ONCE(info->swapped);
/*
* The easier cases are when the shmem object has nothing in swap, or
* the vma maps it whole. Then we can simply use the stats that we
* already track.
*/
if (!swapped)
return 0;
if (!vma->vm_pgoff && vma->vm_end - vma->vm_start >= inode->i_size)
return swapped << PAGE_SHIFT;
/* Here comes the more involved part */
return shmem_partial_swap_usage(mapping,
linear_page_index(vma, vma->vm_start),
linear_page_index(vma, vma->vm_end));
}
SHM_UNLOCK: fix Unevictable pages stranded after swap Commit cc39c6a9bbde ("mm: account skipped entries to avoid looping in find_get_pages") correctly fixed an infinite loop; but left a problem that find_get_pages() on shmem would return 0 (appearing to callers to mean end of tree) when it meets a run of nr_pages swap entries. The only uses of find_get_pages() on shmem are via pagevec_lookup(), called from invalidate_mapping_pages(), and from shmctl SHM_UNLOCK's scan_mapping_unevictable_pages(). The first is already commented, and not worth worrying about; but the second can leave pages on the Unevictable list after an unusual sequence of swapping and locking. Fix that by using shmem_find_get_pages_and_swap() (then ignoring the swap) instead of pagevec_lookup(). But I don't want to contaminate vmscan.c with shmem internals, nor shmem.c with LRU locking. So move scan_mapping_unevictable_pages() into shmem.c, renaming it shmem_unlock_mapping(); and rename check_move_unevictable_page() to check_move_unevictable_pages(), looping down an array of pages, oftentimes under the same lock. Leave out the "rotate unevictable list" block: that's a leftover from when this was used for /proc/sys/vm/scan_unevictable_pages, whose flawed handling involved looking at pages at tail of LRU. Was there significance to the sequence first ClearPageUnevictable, then test page_evictable, then SetPageUnevictable here? I think not, we're under LRU lock, and have no barriers between those. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michel Lespinasse <walken@google.com> Cc: <stable@vger.kernel.org> [back to 3.1 but will need respins] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-21 05:34:21 +07:00
/*
* SysV IPC SHM_UNLOCK restore Unevictable pages to their evictable lists.
*/
void shmem_unlock_mapping(struct address_space *mapping)
{
struct pagevec pvec;
pgoff_t indices[PAGEVEC_SIZE];
pgoff_t index = 0;
pagevec_init(&pvec);
SHM_UNLOCK: fix Unevictable pages stranded after swap Commit cc39c6a9bbde ("mm: account skipped entries to avoid looping in find_get_pages") correctly fixed an infinite loop; but left a problem that find_get_pages() on shmem would return 0 (appearing to callers to mean end of tree) when it meets a run of nr_pages swap entries. The only uses of find_get_pages() on shmem are via pagevec_lookup(), called from invalidate_mapping_pages(), and from shmctl SHM_UNLOCK's scan_mapping_unevictable_pages(). The first is already commented, and not worth worrying about; but the second can leave pages on the Unevictable list after an unusual sequence of swapping and locking. Fix that by using shmem_find_get_pages_and_swap() (then ignoring the swap) instead of pagevec_lookup(). But I don't want to contaminate vmscan.c with shmem internals, nor shmem.c with LRU locking. So move scan_mapping_unevictable_pages() into shmem.c, renaming it shmem_unlock_mapping(); and rename check_move_unevictable_page() to check_move_unevictable_pages(), looping down an array of pages, oftentimes under the same lock. Leave out the "rotate unevictable list" block: that's a leftover from when this was used for /proc/sys/vm/scan_unevictable_pages, whose flawed handling involved looking at pages at tail of LRU. Was there significance to the sequence first ClearPageUnevictable, then test page_evictable, then SetPageUnevictable here? I think not, we're under LRU lock, and have no barriers between those. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michel Lespinasse <walken@google.com> Cc: <stable@vger.kernel.org> [back to 3.1 but will need respins] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-21 05:34:21 +07:00
/*
* Minor point, but we might as well stop if someone else SHM_LOCKs it.
*/
while (!mapping_unevictable(mapping)) {
/*
* Avoid pagevec_lookup(): find_get_pages() returns 0 as if it
* has finished, if it hits a row of PAGEVEC_SIZE swap entries.
*/
2014-04-04 04:47:46 +07:00
pvec.nr = find_get_entries(mapping, index,
PAGEVEC_SIZE, pvec.pages, indices);
SHM_UNLOCK: fix Unevictable pages stranded after swap Commit cc39c6a9bbde ("mm: account skipped entries to avoid looping in find_get_pages") correctly fixed an infinite loop; but left a problem that find_get_pages() on shmem would return 0 (appearing to callers to mean end of tree) when it meets a run of nr_pages swap entries. The only uses of find_get_pages() on shmem are via pagevec_lookup(), called from invalidate_mapping_pages(), and from shmctl SHM_UNLOCK's scan_mapping_unevictable_pages(). The first is already commented, and not worth worrying about; but the second can leave pages on the Unevictable list after an unusual sequence of swapping and locking. Fix that by using shmem_find_get_pages_and_swap() (then ignoring the swap) instead of pagevec_lookup(). But I don't want to contaminate vmscan.c with shmem internals, nor shmem.c with LRU locking. So move scan_mapping_unevictable_pages() into shmem.c, renaming it shmem_unlock_mapping(); and rename check_move_unevictable_page() to check_move_unevictable_pages(), looping down an array of pages, oftentimes under the same lock. Leave out the "rotate unevictable list" block: that's a leftover from when this was used for /proc/sys/vm/scan_unevictable_pages, whose flawed handling involved looking at pages at tail of LRU. Was there significance to the sequence first ClearPageUnevictable, then test page_evictable, then SetPageUnevictable here? I think not, we're under LRU lock, and have no barriers between those. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michel Lespinasse <walken@google.com> Cc: <stable@vger.kernel.org> [back to 3.1 but will need respins] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-21 05:34:21 +07:00
if (!pvec.nr)
break;
index = indices[pvec.nr - 1] + 1;
2014-04-04 04:47:46 +07:00
pagevec_remove_exceptionals(&pvec);
check_move_unevictable_pages(&pvec);
SHM_UNLOCK: fix Unevictable pages stranded after swap Commit cc39c6a9bbde ("mm: account skipped entries to avoid looping in find_get_pages") correctly fixed an infinite loop; but left a problem that find_get_pages() on shmem would return 0 (appearing to callers to mean end of tree) when it meets a run of nr_pages swap entries. The only uses of find_get_pages() on shmem are via pagevec_lookup(), called from invalidate_mapping_pages(), and from shmctl SHM_UNLOCK's scan_mapping_unevictable_pages(). The first is already commented, and not worth worrying about; but the second can leave pages on the Unevictable list after an unusual sequence of swapping and locking. Fix that by using shmem_find_get_pages_and_swap() (then ignoring the swap) instead of pagevec_lookup(). But I don't want to contaminate vmscan.c with shmem internals, nor shmem.c with LRU locking. So move scan_mapping_unevictable_pages() into shmem.c, renaming it shmem_unlock_mapping(); and rename check_move_unevictable_page() to check_move_unevictable_pages(), looping down an array of pages, oftentimes under the same lock. Leave out the "rotate unevictable list" block: that's a leftover from when this was used for /proc/sys/vm/scan_unevictable_pages, whose flawed handling involved looking at pages at tail of LRU. Was there significance to the sequence first ClearPageUnevictable, then test page_evictable, then SetPageUnevictable here? I think not, we're under LRU lock, and have no barriers between those. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michel Lespinasse <walken@google.com> Cc: <stable@vger.kernel.org> [back to 3.1 but will need respins] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-21 05:34:21 +07:00
pagevec_release(&pvec);
cond_resched();
}
}
mm: huge tmpfs: try to split_huge_page() when punching hole Yang Shi writes: Currently, when truncating a shmem file, if the range is partly in a THP (start or end is in the middle of THP), the pages actually will just get cleared rather than being freed, unless the range covers the whole THP. Even though all the subpages are truncated (randomly or sequentially), the THP may still be kept in page cache. This might be fine for some usecases which prefer preserving THP, but balloon inflation is handled in base page size. So when using shmem THP as memory backend, QEMU inflation actually doesn't work as expected since it doesn't free memory. But the inflation usecase really needs to get the memory freed. (Anonymous THP will also not get freed right away, but will be freed eventually when all subpages are unmapped: whereas shmem THP still stays in page cache.) Split THP right away when doing partial hole punch, and if split fails just clear the page so that read of the punched area will return zeroes. Hugh Dickins adds: Our earlier "team of pages" huge tmpfs implementation worked in the way that Yang Shi proposes; and we have been using this patch to continue to split the huge page when hole-punched or truncated, since converting over to the compound page implementation. Although huge tmpfs gives out huge pages when available, if the user specifically asks to truncate or punch a hole (perhaps to free memory, perhaps to reduce the memcg charge), then the filesystem should do so as best it can, splitting the huge page. That is not always possible: any additional reference to the huge page prevents split_huge_page() from succeeding, so the result can be flaky. But in practice it works successfully enough that we've not seen any problem from that. Add shmem_punch_compound() to encapsulate the decision of when a split is needed, and doing the split if so. Using this simplifies the flow in shmem_undo_range(); and the first (trylock) pass does not need to do any page clearing on failure, because the second pass will either succeed or do that clearing. Following the example of zero_user_segment() when clearing a partial page, add flush_dcache_page() and set_page_dirty() when clearing a hole - though I'm not certain that either is needed. But: split_huge_page() would be sure to fail if shmem_undo_range()'s pagevec holds further references to the huge page. The easiest way to fix that is for find_get_entries() to return early, as soon as it has put one compound head or tail into the pagevec. At first this felt like a hack; but on examination, this convention better suits all its callers - or will do, if the slight one-page-per-pagevec slowdown in shmem_unlock_mapping() and shmem_seek_hole_data() is transformed into a 512-page-per-pagevec speedup by checking for compound pages there. Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2002261959020.10801@eggly.anvils Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:07:57 +07:00
/*
* Check whether a hole-punch or truncation needs to split a huge page,
* returning true if no split was required, or the split has been successful.
*
* Eviction (or truncation to 0 size) should never need to split a huge page;
* but in rare cases might do so, if shmem_undo_range() failed to trylock on
* head, and then succeeded to trylock on tail.
*
* A split can only succeed when there are no additional references on the
* huge page: so the split below relies upon find_get_entries() having stopped
* when it found a subpage of the huge page, without getting further references.
*/
static bool shmem_punch_compound(struct page *page, pgoff_t start, pgoff_t end)
{
if (!PageTransCompound(page))
return true;
/* Just proceed to delete a huge page wholly within the range punched */
if (PageHead(page) &&
page->index >= start && page->index + HPAGE_PMD_NR <= end)
return true;
/* Try to split huge page, so we can truly punch the hole or truncate */
return split_huge_page(page) >= 0;
}
/*
* Remove range of pages and swap entries from page cache, and free them.
* If !unfalloc, truncate or punch hole; if unfalloc, undo failed fallocate.
*/
static void shmem_undo_range(struct inode *inode, loff_t lstart, loff_t lend,
bool unfalloc)
{
tmpfs: demolish old swap vector support The maximum size of a shmem/tmpfs file has been limited by the maximum size of its triple-indirect swap vector. With 4kB page size, maximum filesize was just over 2TB on a 32-bit kernel, but sadly one eighth of that on a 64-bit kernel. (With 8kB page size, maximum filesize was just over 4TB on a 64-bit kernel, but 16TB on a 32-bit kernel, MAX_LFS_FILESIZE being then more restrictive than swap vector layout.) It's a shame that tmpfs should be more restrictive than ramfs, and this limitation has now been noticed. Add another level to the swap vector? No, it became obscure and hard to maintain, once I complicated it to make use of highmem pages nine years ago: better choose another way. Surely, if 2.4 had had the radix tree pagecache introduced in 2.5, then tmpfs would never have invented its own peculiar radix tree: we would have fitted swap entries into the common radix tree instead, in much the same way as we fit swap entries into page tables. And why should each file have a separate radix tree for its pages and for its swap entries? The swap entries are required precisely where and when the pages are not. We want to put them together in a single radix tree: which can then avoid much of the locking which was needed to prevent them from being exchanged underneath us. This also avoids the waste of memory devoted to swap vectors, first in the shmem_inode itself, then at least two more pages once a file grew beyond 16 data pages (pages accounted by df and du, but not by memcg). Allocated upfront, to avoid allocation when under swapping pressure, but pure waste when CONFIG_SWAP is not set - I have never spattered around the ifdefs to prevent that, preferring this move to sharing the common radix tree instead. There are three downsides to sharing the radix tree. One, that it binds tmpfs more tightly to the rest of mm, either requiring knowledge of swap entries in radix tree there, or duplication of its code here in shmem.c. I believe that the simplications and memory savings (and probable higher performance, not yet measured) justify that. Two, that on HIGHMEM systems with SWAP enabled, it's the lowmem radix nodes that cannot be freed under memory pressure - whereas before it was the less precious highmem swap vector pages that could not be freed. I'm hoping that 64-bit has now been accessible for long enough, that the highmem argument has grown much less persuasive. Three, that swapoff is slower than it used to be on tmpfs files, since it's using a simple generic mechanism not tailored to it: I find this noticeable, and shall want to improve, but maybe nobody else will notice. So... now remove most of the old swap vector code from shmem.c. But, for the moment, keep the simple i_direct vector of 16 pages, with simple accessors shmem_put_swap() and shmem_get_swap(), as a toy implementation to help mark where swap needs to be handled in subsequent patches. Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-04 06:21:20 +07:00
struct address_space *mapping = inode->i_mapping;
struct shmem_inode_info *info = SHMEM_I(inode);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
pgoff_t start = (lstart + PAGE_SIZE - 1) >> PAGE_SHIFT;
pgoff_t end = (lend + 1) >> PAGE_SHIFT;
unsigned int partial_start = lstart & (PAGE_SIZE - 1);
unsigned int partial_end = (lend + 1) & (PAGE_SIZE - 1);
struct pagevec pvec;
pgoff_t indices[PAGEVEC_SIZE];
long nr_swaps_freed = 0;
tmpfs: demolish old swap vector support The maximum size of a shmem/tmpfs file has been limited by the maximum size of its triple-indirect swap vector. With 4kB page size, maximum filesize was just over 2TB on a 32-bit kernel, but sadly one eighth of that on a 64-bit kernel. (With 8kB page size, maximum filesize was just over 4TB on a 64-bit kernel, but 16TB on a 32-bit kernel, MAX_LFS_FILESIZE being then more restrictive than swap vector layout.) It's a shame that tmpfs should be more restrictive than ramfs, and this limitation has now been noticed. Add another level to the swap vector? No, it became obscure and hard to maintain, once I complicated it to make use of highmem pages nine years ago: better choose another way. Surely, if 2.4 had had the radix tree pagecache introduced in 2.5, then tmpfs would never have invented its own peculiar radix tree: we would have fitted swap entries into the common radix tree instead, in much the same way as we fit swap entries into page tables. And why should each file have a separate radix tree for its pages and for its swap entries? The swap entries are required precisely where and when the pages are not. We want to put them together in a single radix tree: which can then avoid much of the locking which was needed to prevent them from being exchanged underneath us. This also avoids the waste of memory devoted to swap vectors, first in the shmem_inode itself, then at least two more pages once a file grew beyond 16 data pages (pages accounted by df and du, but not by memcg). Allocated upfront, to avoid allocation when under swapping pressure, but pure waste when CONFIG_SWAP is not set - I have never spattered around the ifdefs to prevent that, preferring this move to sharing the common radix tree instead. There are three downsides to sharing the radix tree. One, that it binds tmpfs more tightly to the rest of mm, either requiring knowledge of swap entries in radix tree there, or duplication of its code here in shmem.c. I believe that the simplications and memory savings (and probable higher performance, not yet measured) justify that. Two, that on HIGHMEM systems with SWAP enabled, it's the lowmem radix nodes that cannot be freed under memory pressure - whereas before it was the less precious highmem swap vector pages that could not be freed. I'm hoping that 64-bit has now been accessible for long enough, that the highmem argument has grown much less persuasive. Three, that swapoff is slower than it used to be on tmpfs files, since it's using a simple generic mechanism not tailored to it: I find this noticeable, and shall want to improve, but maybe nobody else will notice. So... now remove most of the old swap vector code from shmem.c. But, for the moment, keep the simple i_direct vector of 16 pages, with simple accessors shmem_put_swap() and shmem_get_swap(), as a toy implementation to help mark where swap needs to be handled in subsequent patches. Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-04 06:21:20 +07:00
pgoff_t index;
int i;
if (lend == -1)
end = -1; /* unsigned, so actually very big */
pagevec_init(&pvec);
index = start;
while (index < end) {
2014-04-04 04:47:46 +07:00
pvec.nr = find_get_entries(mapping, index,
min(end - index, (pgoff_t)PAGEVEC_SIZE),
pvec.pages, indices);
if (!pvec.nr)
break;
for (i = 0; i < pagevec_count(&pvec); i++) {
struct page *page = pvec.pages[i];
index = indices[i];
if (index >= end)
break;
if (xa_is_value(page)) {
if (unfalloc)
continue;
nr_swaps_freed += !shmem_free_swap(mapping,
index, page);
continue;
}
VM_BUG_ON_PAGE(page_to_pgoff(page) != index, page);
if (!trylock_page(page))
continue;
mm: huge tmpfs: try to split_huge_page() when punching hole Yang Shi writes: Currently, when truncating a shmem file, if the range is partly in a THP (start or end is in the middle of THP), the pages actually will just get cleared rather than being freed, unless the range covers the whole THP. Even though all the subpages are truncated (randomly or sequentially), the THP may still be kept in page cache. This might be fine for some usecases which prefer preserving THP, but balloon inflation is handled in base page size. So when using shmem THP as memory backend, QEMU inflation actually doesn't work as expected since it doesn't free memory. But the inflation usecase really needs to get the memory freed. (Anonymous THP will also not get freed right away, but will be freed eventually when all subpages are unmapped: whereas shmem THP still stays in page cache.) Split THP right away when doing partial hole punch, and if split fails just clear the page so that read of the punched area will return zeroes. Hugh Dickins adds: Our earlier "team of pages" huge tmpfs implementation worked in the way that Yang Shi proposes; and we have been using this patch to continue to split the huge page when hole-punched or truncated, since converting over to the compound page implementation. Although huge tmpfs gives out huge pages when available, if the user specifically asks to truncate or punch a hole (perhaps to free memory, perhaps to reduce the memcg charge), then the filesystem should do so as best it can, splitting the huge page. That is not always possible: any additional reference to the huge page prevents split_huge_page() from succeeding, so the result can be flaky. But in practice it works successfully enough that we've not seen any problem from that. Add shmem_punch_compound() to encapsulate the decision of when a split is needed, and doing the split if so. Using this simplifies the flow in shmem_undo_range(); and the first (trylock) pass does not need to do any page clearing on failure, because the second pass will either succeed or do that clearing. Following the example of zero_user_segment() when clearing a partial page, add flush_dcache_page() and set_page_dirty() when clearing a hole - though I'm not certain that either is needed. But: split_huge_page() would be sure to fail if shmem_undo_range()'s pagevec holds further references to the huge page. The easiest way to fix that is for find_get_entries() to return early, as soon as it has put one compound head or tail into the pagevec. At first this felt like a hack; but on examination, this convention better suits all its callers - or will do, if the slight one-page-per-pagevec slowdown in shmem_unlock_mapping() and shmem_seek_hole_data() is transformed into a 512-page-per-pagevec speedup by checking for compound pages there. Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2002261959020.10801@eggly.anvils Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:07:57 +07:00
if ((!unfalloc || !PageUptodate(page)) &&
page_mapping(page) == mapping) {
VM_BUG_ON_PAGE(PageWriteback(page), page);
if (shmem_punch_compound(page, start, end))
truncate_inode_page(mapping, page);
}
unlock_page(page);
}
2014-04-04 04:47:46 +07:00
pagevec_remove_exceptionals(&pvec);
SHM_UNLOCK: fix Unevictable pages stranded after swap Commit cc39c6a9bbde ("mm: account skipped entries to avoid looping in find_get_pages") correctly fixed an infinite loop; but left a problem that find_get_pages() on shmem would return 0 (appearing to callers to mean end of tree) when it meets a run of nr_pages swap entries. The only uses of find_get_pages() on shmem are via pagevec_lookup(), called from invalidate_mapping_pages(), and from shmctl SHM_UNLOCK's scan_mapping_unevictable_pages(). The first is already commented, and not worth worrying about; but the second can leave pages on the Unevictable list after an unusual sequence of swapping and locking. Fix that by using shmem_find_get_pages_and_swap() (then ignoring the swap) instead of pagevec_lookup(). But I don't want to contaminate vmscan.c with shmem internals, nor shmem.c with LRU locking. So move scan_mapping_unevictable_pages() into shmem.c, renaming it shmem_unlock_mapping(); and rename check_move_unevictable_page() to check_move_unevictable_pages(), looping down an array of pages, oftentimes under the same lock. Leave out the "rotate unevictable list" block: that's a leftover from when this was used for /proc/sys/vm/scan_unevictable_pages, whose flawed handling involved looking at pages at tail of LRU. Was there significance to the sequence first ClearPageUnevictable, then test page_evictable, then SetPageUnevictable here? I think not, we're under LRU lock, and have no barriers between those. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michel Lespinasse <walken@google.com> Cc: <stable@vger.kernel.org> [back to 3.1 but will need respins] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-21 05:34:21 +07:00
pagevec_release(&pvec);
cond_resched();
index++;
}
if (partial_start) {
struct page *page = NULL;
shmem_getpage(inode, start - 1, &page, SGP_READ);
if (page) {
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
unsigned int top = PAGE_SIZE;
if (start > end) {
top = partial_end;
partial_end = 0;
}
zero_user_segment(page, partial_start, top);
set_page_dirty(page);
unlock_page(page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
put_page(page);
}
}
if (partial_end) {
struct page *page = NULL;
shmem_getpage(inode, end, &page, SGP_READ);
if (page) {
zero_user_segment(page, 0, partial_end);
set_page_dirty(page);
unlock_page(page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
put_page(page);
}
}
if (start >= end)
return;
index = start;
shmem: fix splicing from a hole while it's punched shmem_fault() is the actual culprit in trinity's hole-punch starvation, and the most significant cause of such problems: since a page faulted is one that then appears page_mapped(), needing unmap_mapping_range() and i_mmap_mutex to be unmapped again. But it is not the only way in which a page can be brought into a hole in the radix_tree while that hole is being punched; and Vlastimil's testing implies that if enough other processors are busy filling in the hole, then shmem_undo_range() can be kept from completing indefinitely. shmem_file_splice_read() is the main other user of SGP_CACHE, which can instantiate shmem pagecache pages in the read-only case (without holding i_mutex, so perhaps concurrently with a hole-punch). Probably it's silly not to use SGP_READ already (using the ZERO_PAGE for holes): which ought to be safe, but might bring surprises - not a change to be rushed. shmem_read_mapping_page_gfp() is an internal interface used by drivers/gpu/drm GEM (and next by uprobes): it should be okay. And shmem_file_read_iter() uses the SGP_DIRTY variant of SGP_CACHE, when called internally by the kernel (perhaps for a stacking filesystem, which might rely on holes to be reserved): it's unclear whether it could be provoked to keep hole-punch busy or not. We could apply the same umbrella as now used in shmem_fault() to shmem_file_splice_read() and the others; but it looks ugly, and use over a range raises questions - should it actually be per page? can these get starved themselves? The origin of this part of the problem is my v3.1 commit d0823576bf4b ("mm: pincer in truncate_inode_pages_range"), once it was duplicated into shmem.c. It seemed like a nice idea at the time, to ensure (barring RCU lookup fuzziness) that there's an instant when the entire hole is empty; but the indefinitely repeated scans to ensure that make it vulnerable. Revert that "enhancement" to hole-punch from shmem_undo_range(), but retain the unproblematic rescanning when it's truncating; add a couple of comments there. Remove the "indices[0] >= end" test: that is now handled satisfactorily by the inner loop, and mem_cgroup_uncharge_start()/end() are too light to be worth avoiding here. But if we do not always loop indefinitely, we do need to handle the case of swap swizzled back to page before shmem_free_swap() gets it: add a retry for that case, as suggested by Konstantin Khlebnikov; and for the case of page swizzled back to swap, as suggested by Johannes Weiner. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Suggested-by: Vlastimil Babka <vbabka@suse.cz> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lukas Czerner <lczerner@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: <stable@vger.kernel.org> [3.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-24 04:00:13 +07:00
while (index < end) {
cond_resched();
2014-04-04 04:47:46 +07:00
pvec.nr = find_get_entries(mapping, index,
min(end - index, (pgoff_t)PAGEVEC_SIZE),
2014-04-04 04:47:46 +07:00
pvec.pages, indices);
if (!pvec.nr) {
shmem: fix splicing from a hole while it's punched shmem_fault() is the actual culprit in trinity's hole-punch starvation, and the most significant cause of such problems: since a page faulted is one that then appears page_mapped(), needing unmap_mapping_range() and i_mmap_mutex to be unmapped again. But it is not the only way in which a page can be brought into a hole in the radix_tree while that hole is being punched; and Vlastimil's testing implies that if enough other processors are busy filling in the hole, then shmem_undo_range() can be kept from completing indefinitely. shmem_file_splice_read() is the main other user of SGP_CACHE, which can instantiate shmem pagecache pages in the read-only case (without holding i_mutex, so perhaps concurrently with a hole-punch). Probably it's silly not to use SGP_READ already (using the ZERO_PAGE for holes): which ought to be safe, but might bring surprises - not a change to be rushed. shmem_read_mapping_page_gfp() is an internal interface used by drivers/gpu/drm GEM (and next by uprobes): it should be okay. And shmem_file_read_iter() uses the SGP_DIRTY variant of SGP_CACHE, when called internally by the kernel (perhaps for a stacking filesystem, which might rely on holes to be reserved): it's unclear whether it could be provoked to keep hole-punch busy or not. We could apply the same umbrella as now used in shmem_fault() to shmem_file_splice_read() and the others; but it looks ugly, and use over a range raises questions - should it actually be per page? can these get starved themselves? The origin of this part of the problem is my v3.1 commit d0823576bf4b ("mm: pincer in truncate_inode_pages_range"), once it was duplicated into shmem.c. It seemed like a nice idea at the time, to ensure (barring RCU lookup fuzziness) that there's an instant when the entire hole is empty; but the indefinitely repeated scans to ensure that make it vulnerable. Revert that "enhancement" to hole-punch from shmem_undo_range(), but retain the unproblematic rescanning when it's truncating; add a couple of comments there. Remove the "indices[0] >= end" test: that is now handled satisfactorily by the inner loop, and mem_cgroup_uncharge_start()/end() are too light to be worth avoiding here. But if we do not always loop indefinitely, we do need to handle the case of swap swizzled back to page before shmem_free_swap() gets it: add a retry for that case, as suggested by Konstantin Khlebnikov; and for the case of page swizzled back to swap, as suggested by Johannes Weiner. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Suggested-by: Vlastimil Babka <vbabka@suse.cz> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lukas Czerner <lczerner@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: <stable@vger.kernel.org> [3.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-24 04:00:13 +07:00
/* If all gone or hole-punch or unfalloc, we're done */
if (index == start || end != -1)
break;
shmem: fix splicing from a hole while it's punched shmem_fault() is the actual culprit in trinity's hole-punch starvation, and the most significant cause of such problems: since a page faulted is one that then appears page_mapped(), needing unmap_mapping_range() and i_mmap_mutex to be unmapped again. But it is not the only way in which a page can be brought into a hole in the radix_tree while that hole is being punched; and Vlastimil's testing implies that if enough other processors are busy filling in the hole, then shmem_undo_range() can be kept from completing indefinitely. shmem_file_splice_read() is the main other user of SGP_CACHE, which can instantiate shmem pagecache pages in the read-only case (without holding i_mutex, so perhaps concurrently with a hole-punch). Probably it's silly not to use SGP_READ already (using the ZERO_PAGE for holes): which ought to be safe, but might bring surprises - not a change to be rushed. shmem_read_mapping_page_gfp() is an internal interface used by drivers/gpu/drm GEM (and next by uprobes): it should be okay. And shmem_file_read_iter() uses the SGP_DIRTY variant of SGP_CACHE, when called internally by the kernel (perhaps for a stacking filesystem, which might rely on holes to be reserved): it's unclear whether it could be provoked to keep hole-punch busy or not. We could apply the same umbrella as now used in shmem_fault() to shmem_file_splice_read() and the others; but it looks ugly, and use over a range raises questions - should it actually be per page? can these get starved themselves? The origin of this part of the problem is my v3.1 commit d0823576bf4b ("mm: pincer in truncate_inode_pages_range"), once it was duplicated into shmem.c. It seemed like a nice idea at the time, to ensure (barring RCU lookup fuzziness) that there's an instant when the entire hole is empty; but the indefinitely repeated scans to ensure that make it vulnerable. Revert that "enhancement" to hole-punch from shmem_undo_range(), but retain the unproblematic rescanning when it's truncating; add a couple of comments there. Remove the "indices[0] >= end" test: that is now handled satisfactorily by the inner loop, and mem_cgroup_uncharge_start()/end() are too light to be worth avoiding here. But if we do not always loop indefinitely, we do need to handle the case of swap swizzled back to page before shmem_free_swap() gets it: add a retry for that case, as suggested by Konstantin Khlebnikov; and for the case of page swizzled back to swap, as suggested by Johannes Weiner. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Suggested-by: Vlastimil Babka <vbabka@suse.cz> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lukas Czerner <lczerner@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: <stable@vger.kernel.org> [3.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-24 04:00:13 +07:00
/* But if truncating, restart to make sure all gone */
index = start;
continue;
}
for (i = 0; i < pagevec_count(&pvec); i++) {
struct page *page = pvec.pages[i];
index = indices[i];
if (index >= end)
break;
if (xa_is_value(page)) {
if (unfalloc)
continue;
shmem: fix splicing from a hole while it's punched shmem_fault() is the actual culprit in trinity's hole-punch starvation, and the most significant cause of such problems: since a page faulted is one that then appears page_mapped(), needing unmap_mapping_range() and i_mmap_mutex to be unmapped again. But it is not the only way in which a page can be brought into a hole in the radix_tree while that hole is being punched; and Vlastimil's testing implies that if enough other processors are busy filling in the hole, then shmem_undo_range() can be kept from completing indefinitely. shmem_file_splice_read() is the main other user of SGP_CACHE, which can instantiate shmem pagecache pages in the read-only case (without holding i_mutex, so perhaps concurrently with a hole-punch). Probably it's silly not to use SGP_READ already (using the ZERO_PAGE for holes): which ought to be safe, but might bring surprises - not a change to be rushed. shmem_read_mapping_page_gfp() is an internal interface used by drivers/gpu/drm GEM (and next by uprobes): it should be okay. And shmem_file_read_iter() uses the SGP_DIRTY variant of SGP_CACHE, when called internally by the kernel (perhaps for a stacking filesystem, which might rely on holes to be reserved): it's unclear whether it could be provoked to keep hole-punch busy or not. We could apply the same umbrella as now used in shmem_fault() to shmem_file_splice_read() and the others; but it looks ugly, and use over a range raises questions - should it actually be per page? can these get starved themselves? The origin of this part of the problem is my v3.1 commit d0823576bf4b ("mm: pincer in truncate_inode_pages_range"), once it was duplicated into shmem.c. It seemed like a nice idea at the time, to ensure (barring RCU lookup fuzziness) that there's an instant when the entire hole is empty; but the indefinitely repeated scans to ensure that make it vulnerable. Revert that "enhancement" to hole-punch from shmem_undo_range(), but retain the unproblematic rescanning when it's truncating; add a couple of comments there. Remove the "indices[0] >= end" test: that is now handled satisfactorily by the inner loop, and mem_cgroup_uncharge_start()/end() are too light to be worth avoiding here. But if we do not always loop indefinitely, we do need to handle the case of swap swizzled back to page before shmem_free_swap() gets it: add a retry for that case, as suggested by Konstantin Khlebnikov; and for the case of page swizzled back to swap, as suggested by Johannes Weiner. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Suggested-by: Vlastimil Babka <vbabka@suse.cz> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lukas Czerner <lczerner@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: <stable@vger.kernel.org> [3.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-24 04:00:13 +07:00
if (shmem_free_swap(mapping, index, page)) {
/* Swap was replaced by page: retry */
index--;
break;
}
nr_swaps_freed++;
continue;
}
lock_page(page);
if (!unfalloc || !PageUptodate(page)) {
mm: huge tmpfs: try to split_huge_page() when punching hole Yang Shi writes: Currently, when truncating a shmem file, if the range is partly in a THP (start or end is in the middle of THP), the pages actually will just get cleared rather than being freed, unless the range covers the whole THP. Even though all the subpages are truncated (randomly or sequentially), the THP may still be kept in page cache. This might be fine for some usecases which prefer preserving THP, but balloon inflation is handled in base page size. So when using shmem THP as memory backend, QEMU inflation actually doesn't work as expected since it doesn't free memory. But the inflation usecase really needs to get the memory freed. (Anonymous THP will also not get freed right away, but will be freed eventually when all subpages are unmapped: whereas shmem THP still stays in page cache.) Split THP right away when doing partial hole punch, and if split fails just clear the page so that read of the punched area will return zeroes. Hugh Dickins adds: Our earlier "team of pages" huge tmpfs implementation worked in the way that Yang Shi proposes; and we have been using this patch to continue to split the huge page when hole-punched or truncated, since converting over to the compound page implementation. Although huge tmpfs gives out huge pages when available, if the user specifically asks to truncate or punch a hole (perhaps to free memory, perhaps to reduce the memcg charge), then the filesystem should do so as best it can, splitting the huge page. That is not always possible: any additional reference to the huge page prevents split_huge_page() from succeeding, so the result can be flaky. But in practice it works successfully enough that we've not seen any problem from that. Add shmem_punch_compound() to encapsulate the decision of when a split is needed, and doing the split if so. Using this simplifies the flow in shmem_undo_range(); and the first (trylock) pass does not need to do any page clearing on failure, because the second pass will either succeed or do that clearing. Following the example of zero_user_segment() when clearing a partial page, add flush_dcache_page() and set_page_dirty() when clearing a hole - though I'm not certain that either is needed. But: split_huge_page() would be sure to fail if shmem_undo_range()'s pagevec holds further references to the huge page. The easiest way to fix that is for find_get_entries() to return early, as soon as it has put one compound head or tail into the pagevec. At first this felt like a hack; but on examination, this convention better suits all its callers - or will do, if the slight one-page-per-pagevec slowdown in shmem_unlock_mapping() and shmem_seek_hole_data() is transformed into a 512-page-per-pagevec speedup by checking for compound pages there. Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2002261959020.10801@eggly.anvils Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:07:57 +07:00
if (page_mapping(page) != mapping) {
shmem: fix splicing from a hole while it's punched shmem_fault() is the actual culprit in trinity's hole-punch starvation, and the most significant cause of such problems: since a page faulted is one that then appears page_mapped(), needing unmap_mapping_range() and i_mmap_mutex to be unmapped again. But it is not the only way in which a page can be brought into a hole in the radix_tree while that hole is being punched; and Vlastimil's testing implies that if enough other processors are busy filling in the hole, then shmem_undo_range() can be kept from completing indefinitely. shmem_file_splice_read() is the main other user of SGP_CACHE, which can instantiate shmem pagecache pages in the read-only case (without holding i_mutex, so perhaps concurrently with a hole-punch). Probably it's silly not to use SGP_READ already (using the ZERO_PAGE for holes): which ought to be safe, but might bring surprises - not a change to be rushed. shmem_read_mapping_page_gfp() is an internal interface used by drivers/gpu/drm GEM (and next by uprobes): it should be okay. And shmem_file_read_iter() uses the SGP_DIRTY variant of SGP_CACHE, when called internally by the kernel (perhaps for a stacking filesystem, which might rely on holes to be reserved): it's unclear whether it could be provoked to keep hole-punch busy or not. We could apply the same umbrella as now used in shmem_fault() to shmem_file_splice_read() and the others; but it looks ugly, and use over a range raises questions - should it actually be per page? can these get starved themselves? The origin of this part of the problem is my v3.1 commit d0823576bf4b ("mm: pincer in truncate_inode_pages_range"), once it was duplicated into shmem.c. It seemed like a nice idea at the time, to ensure (barring RCU lookup fuzziness) that there's an instant when the entire hole is empty; but the indefinitely repeated scans to ensure that make it vulnerable. Revert that "enhancement" to hole-punch from shmem_undo_range(), but retain the unproblematic rescanning when it's truncating; add a couple of comments there. Remove the "indices[0] >= end" test: that is now handled satisfactorily by the inner loop, and mem_cgroup_uncharge_start()/end() are too light to be worth avoiding here. But if we do not always loop indefinitely, we do need to handle the case of swap swizzled back to page before shmem_free_swap() gets it: add a retry for that case, as suggested by Konstantin Khlebnikov; and for the case of page swizzled back to swap, as suggested by Johannes Weiner. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Suggested-by: Vlastimil Babka <vbabka@suse.cz> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lukas Czerner <lczerner@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: <stable@vger.kernel.org> [3.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-24 04:00:13 +07:00
/* Page was replaced by swap: retry */
unlock_page(page);
index--;
break;
}
mm: huge tmpfs: try to split_huge_page() when punching hole Yang Shi writes: Currently, when truncating a shmem file, if the range is partly in a THP (start or end is in the middle of THP), the pages actually will just get cleared rather than being freed, unless the range covers the whole THP. Even though all the subpages are truncated (randomly or sequentially), the THP may still be kept in page cache. This might be fine for some usecases which prefer preserving THP, but balloon inflation is handled in base page size. So when using shmem THP as memory backend, QEMU inflation actually doesn't work as expected since it doesn't free memory. But the inflation usecase really needs to get the memory freed. (Anonymous THP will also not get freed right away, but will be freed eventually when all subpages are unmapped: whereas shmem THP still stays in page cache.) Split THP right away when doing partial hole punch, and if split fails just clear the page so that read of the punched area will return zeroes. Hugh Dickins adds: Our earlier "team of pages" huge tmpfs implementation worked in the way that Yang Shi proposes; and we have been using this patch to continue to split the huge page when hole-punched or truncated, since converting over to the compound page implementation. Although huge tmpfs gives out huge pages when available, if the user specifically asks to truncate or punch a hole (perhaps to free memory, perhaps to reduce the memcg charge), then the filesystem should do so as best it can, splitting the huge page. That is not always possible: any additional reference to the huge page prevents split_huge_page() from succeeding, so the result can be flaky. But in practice it works successfully enough that we've not seen any problem from that. Add shmem_punch_compound() to encapsulate the decision of when a split is needed, and doing the split if so. Using this simplifies the flow in shmem_undo_range(); and the first (trylock) pass does not need to do any page clearing on failure, because the second pass will either succeed or do that clearing. Following the example of zero_user_segment() when clearing a partial page, add flush_dcache_page() and set_page_dirty() when clearing a hole - though I'm not certain that either is needed. But: split_huge_page() would be sure to fail if shmem_undo_range()'s pagevec holds further references to the huge page. The easiest way to fix that is for find_get_entries() to return early, as soon as it has put one compound head or tail into the pagevec. At first this felt like a hack; but on examination, this convention better suits all its callers - or will do, if the slight one-page-per-pagevec slowdown in shmem_unlock_mapping() and shmem_seek_hole_data() is transformed into a 512-page-per-pagevec speedup by checking for compound pages there. Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2002261959020.10801@eggly.anvils Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:07:57 +07:00
VM_BUG_ON_PAGE(PageWriteback(page), page);
if (shmem_punch_compound(page, start, end))
truncate_inode_page(mapping, page);
else if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE)) {
mm: huge tmpfs: try to split_huge_page() when punching hole Yang Shi writes: Currently, when truncating a shmem file, if the range is partly in a THP (start or end is in the middle of THP), the pages actually will just get cleared rather than being freed, unless the range covers the whole THP. Even though all the subpages are truncated (randomly or sequentially), the THP may still be kept in page cache. This might be fine for some usecases which prefer preserving THP, but balloon inflation is handled in base page size. So when using shmem THP as memory backend, QEMU inflation actually doesn't work as expected since it doesn't free memory. But the inflation usecase really needs to get the memory freed. (Anonymous THP will also not get freed right away, but will be freed eventually when all subpages are unmapped: whereas shmem THP still stays in page cache.) Split THP right away when doing partial hole punch, and if split fails just clear the page so that read of the punched area will return zeroes. Hugh Dickins adds: Our earlier "team of pages" huge tmpfs implementation worked in the way that Yang Shi proposes; and we have been using this patch to continue to split the huge page when hole-punched or truncated, since converting over to the compound page implementation. Although huge tmpfs gives out huge pages when available, if the user specifically asks to truncate or punch a hole (perhaps to free memory, perhaps to reduce the memcg charge), then the filesystem should do so as best it can, splitting the huge page. That is not always possible: any additional reference to the huge page prevents split_huge_page() from succeeding, so the result can be flaky. But in practice it works successfully enough that we've not seen any problem from that. Add shmem_punch_compound() to encapsulate the decision of when a split is needed, and doing the split if so. Using this simplifies the flow in shmem_undo_range(); and the first (trylock) pass does not need to do any page clearing on failure, because the second pass will either succeed or do that clearing. Following the example of zero_user_segment() when clearing a partial page, add flush_dcache_page() and set_page_dirty() when clearing a hole - though I'm not certain that either is needed. But: split_huge_page() would be sure to fail if shmem_undo_range()'s pagevec holds further references to the huge page. The easiest way to fix that is for find_get_entries() to return early, as soon as it has put one compound head or tail into the pagevec. At first this felt like a hack; but on examination, this convention better suits all its callers - or will do, if the slight one-page-per-pagevec slowdown in shmem_unlock_mapping() and shmem_seek_hole_data() is transformed into a 512-page-per-pagevec speedup by checking for compound pages there. Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2002261959020.10801@eggly.anvils Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:07:57 +07:00
/* Wipe the page and don't get stuck */
clear_highpage(page);
flush_dcache_page(page);
set_page_dirty(page);
if (index <
round_up(start, HPAGE_PMD_NR))
start = index + 1;
}
}
unlock_page(page);
}
2014-04-04 04:47:46 +07:00
pagevec_remove_exceptionals(&pvec);
SHM_UNLOCK: fix Unevictable pages stranded after swap Commit cc39c6a9bbde ("mm: account skipped entries to avoid looping in find_get_pages") correctly fixed an infinite loop; but left a problem that find_get_pages() on shmem would return 0 (appearing to callers to mean end of tree) when it meets a run of nr_pages swap entries. The only uses of find_get_pages() on shmem are via pagevec_lookup(), called from invalidate_mapping_pages(), and from shmctl SHM_UNLOCK's scan_mapping_unevictable_pages(). The first is already commented, and not worth worrying about; but the second can leave pages on the Unevictable list after an unusual sequence of swapping and locking. Fix that by using shmem_find_get_pages_and_swap() (then ignoring the swap) instead of pagevec_lookup(). But I don't want to contaminate vmscan.c with shmem internals, nor shmem.c with LRU locking. So move scan_mapping_unevictable_pages() into shmem.c, renaming it shmem_unlock_mapping(); and rename check_move_unevictable_page() to check_move_unevictable_pages(), looping down an array of pages, oftentimes under the same lock. Leave out the "rotate unevictable list" block: that's a leftover from when this was used for /proc/sys/vm/scan_unevictable_pages, whose flawed handling involved looking at pages at tail of LRU. Was there significance to the sequence first ClearPageUnevictable, then test page_evictable, then SetPageUnevictable here? I think not, we're under LRU lock, and have no barriers between those. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michel Lespinasse <walken@google.com> Cc: <stable@vger.kernel.org> [back to 3.1 but will need respins] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-21 05:34:21 +07:00
pagevec_release(&pvec);
index++;
}
tmpfs: take control of its truncate_range 2.6.35's new truncate convention gave tmpfs the opportunity to control its file truncation, no longer enforced from outside by vmtruncate(). We shall want to build upon that, to handle pagecache and swap together. Slightly redefine the ->truncate_range interface: let it now be called between the unmap_mapping_range()s, with the filesystem responsible for doing the truncate_inode_pages_range() from it - just as the filesystem is nowadays responsible for doing that from its ->setattr. Let's rename shmem_notify_change() to shmem_setattr(). Instead of calling the generic truncate_setsize(), bring that code in so we can call shmem_truncate_range() - which will later be updated to perform its own variant of truncate_inode_pages_range(). Remove the punch_hole unmap_mapping_range() from shmem_truncate_range(): now that the COW's unmap_mapping_range() comes after ->truncate_range, there is no need to call it a third time. Export shmem_truncate_range() and add it to the list in shmem_fs.h, so that i915_gem_object_truncate() can call it explicitly in future; get this patch in first, then update drm/i915 once this is available (until then, i915 will just be doing the truncate_inode_pages() twice). Though introduced five years ago, no other filesystem is implementing ->truncate_range, and its only other user is madvise(,,MADV_REMOVE): we expect to convert it to fallocate(,FALLOC_FL_PUNCH_HOLE,,) shortly, whereupon ->truncate_range can be removed from inode_operations - shmem_truncate_range() will help i915 across that transition too. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-28 06:18:03 +07:00
spin_lock_irq(&info->lock);
info->swapped -= nr_swaps_freed;
shmem_recalc_inode(inode);
spin_unlock_irq(&info->lock);
}
void shmem_truncate_range(struct inode *inode, loff_t lstart, loff_t lend)
{
shmem_undo_range(inode, lstart, lend, false);
inode->i_ctime = inode->i_mtime = current_time(inode);
}
tmpfs: take control of its truncate_range 2.6.35's new truncate convention gave tmpfs the opportunity to control its file truncation, no longer enforced from outside by vmtruncate(). We shall want to build upon that, to handle pagecache and swap together. Slightly redefine the ->truncate_range interface: let it now be called between the unmap_mapping_range()s, with the filesystem responsible for doing the truncate_inode_pages_range() from it - just as the filesystem is nowadays responsible for doing that from its ->setattr. Let's rename shmem_notify_change() to shmem_setattr(). Instead of calling the generic truncate_setsize(), bring that code in so we can call shmem_truncate_range() - which will later be updated to perform its own variant of truncate_inode_pages_range(). Remove the punch_hole unmap_mapping_range() from shmem_truncate_range(): now that the COW's unmap_mapping_range() comes after ->truncate_range, there is no need to call it a third time. Export shmem_truncate_range() and add it to the list in shmem_fs.h, so that i915_gem_object_truncate() can call it explicitly in future; get this patch in first, then update drm/i915 once this is available (until then, i915 will just be doing the truncate_inode_pages() twice). Though introduced five years ago, no other filesystem is implementing ->truncate_range, and its only other user is madvise(,,MADV_REMOVE): we expect to convert it to fallocate(,FALLOC_FL_PUNCH_HOLE,,) shortly, whereupon ->truncate_range can be removed from inode_operations - shmem_truncate_range() will help i915 across that transition too. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-28 06:18:03 +07:00
EXPORT_SYMBOL_GPL(shmem_truncate_range);
statx: Add a system call to make enhanced file info available Add a system call to make extended file information available, including file creation and some attribute flags where available through the underlying filesystem. The getattr inode operation is altered to take two additional arguments: a u32 request_mask and an unsigned int flags that indicate the synchronisation mode. This change is propagated to the vfs_getattr*() function. Functions like vfs_stat() are now inline wrappers around new functions vfs_statx() and vfs_statx_fd() to reduce stack usage. ======== OVERVIEW ======== The idea was initially proposed as a set of xattrs that could be retrieved with getxattr(), but the general preference proved to be for a new syscall with an extended stat structure. A number of requests were gathered for features to be included. The following have been included: (1) Make the fields a consistent size on all arches and make them large. (2) Spare space, request flags and information flags are provided for future expansion. (3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an __s64). (4) Creation time: The SMB protocol carries the creation time, which could be exported by Samba, which will in turn help CIFS make use of FS-Cache as that can be used for coherency data (stx_btime). This is also specified in NFSv4 as a recommended attribute and could be exported by NFSD [Steve French]. (5) Lightweight stat: Ask for just those details of interest, and allow a netfs (such as NFS) to approximate anything not of interest, possibly without going to the server [Trond Myklebust, Ulrich Drepper, Andreas Dilger] (AT_STATX_DONT_SYNC). (6) Heavyweight stat: Force a netfs to go to the server, even if it thinks its cached attributes are up to date [Trond Myklebust] (AT_STATX_FORCE_SYNC). And the following have been left out for future extension: (7) Data version number: Could be used by userspace NFS servers [Aneesh Kumar]. Can also be used to modify fill_post_wcc() in NFSD which retrieves i_version directly, but has just called vfs_getattr(). It could get it from the kstat struct if it used vfs_xgetattr() instead. (There's disagreement on the exact semantics of a single field, since not all filesystems do this the same way). (8) BSD stat compatibility: Including more fields from the BSD stat such as creation time (st_btime) and inode generation number (st_gen) [Jeremy Allison, Bernd Schubert]. (9) Inode generation number: Useful for FUSE and userspace NFS servers [Bernd Schubert]. (This was asked for but later deemed unnecessary with the open-by-handle capability available and caused disagreement as to whether it's a security hole or not). (10) Extra coherency data may be useful in making backups [Andreas Dilger]. (No particular data were offered, but things like last backup timestamp, the data version number and the DOS archive bit would come into this category). (11) Allow the filesystem to indicate what it can/cannot provide: A filesystem can now say it doesn't support a standard stat feature if that isn't available, so if, for instance, inode numbers or UIDs don't exist or are fabricated locally... (This requires a separate system call - I have an fsinfo() call idea for this). (12) Store a 16-byte volume ID in the superblock that can be returned in struct xstat [Steve French]. (Deferred to fsinfo). (13) Include granularity fields in the time data to indicate the granularity of each of the times (NFSv4 time_delta) [Steve French]. (Deferred to fsinfo). (14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags. Note that the Linux IOC flags are a mess and filesystems such as Ext4 define flags that aren't in linux/fs.h, so translation in the kernel may be a necessity (or, possibly, we provide the filesystem type too). (Some attributes are made available in stx_attributes, but the general feeling was that the IOC flags were to ext[234]-specific and shouldn't be exposed through statx this way). (15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer, Michael Kerrisk]. (Deferred, probably to fsinfo. Finding out if there's an ACL or seclabal might require extra filesystem operations). (16) Femtosecond-resolution timestamps [Dave Chinner]. (A __reserved field has been left in the statx_timestamp struct for this - if there proves to be a need). (17) A set multiple attributes syscall to go with this. =============== NEW SYSTEM CALL =============== The new system call is: int ret = statx(int dfd, const char *filename, unsigned int flags, unsigned int mask, struct statx *buffer); The dfd, filename and flags parameters indicate the file to query, in a similar way to fstatat(). There is no equivalent of lstat() as that can be emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is also no equivalent of fstat() as that can be emulated by passing a NULL filename to statx() with the fd of interest in dfd. Whether or not statx() synchronises the attributes with the backing store can be controlled by OR'ing a value into the flags argument (this typically only affects network filesystems): (1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this respect. (2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise its attributes with the server - which might require data writeback to occur to get the timestamps correct. (3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a network filesystem. The resulting values should be considered approximate. mask is a bitmask indicating the fields in struct statx that are of interest to the caller. The user should set this to STATX_BASIC_STATS to get the basic set returned by stat(). It should be noted that asking for more information may entail extra I/O operations. buffer points to the destination for the data. This must be 256 bytes in size. ====================== MAIN ATTRIBUTES RECORD ====================== The following structures are defined in which to return the main attribute set: struct statx_timestamp { __s64 tv_sec; __s32 tv_nsec; __s32 __reserved; }; struct statx { __u32 stx_mask; __u32 stx_blksize; __u64 stx_attributes; __u32 stx_nlink; __u32 stx_uid; __u32 stx_gid; __u16 stx_mode; __u16 __spare0[1]; __u64 stx_ino; __u64 stx_size; __u64 stx_blocks; __u64 __spare1[1]; struct statx_timestamp stx_atime; struct statx_timestamp stx_btime; struct statx_timestamp stx_ctime; struct statx_timestamp stx_mtime; __u32 stx_rdev_major; __u32 stx_rdev_minor; __u32 stx_dev_major; __u32 stx_dev_minor; __u64 __spare2[14]; }; The defined bits in request_mask and stx_mask are: STATX_TYPE Want/got stx_mode & S_IFMT STATX_MODE Want/got stx_mode & ~S_IFMT STATX_NLINK Want/got stx_nlink STATX_UID Want/got stx_uid STATX_GID Want/got stx_gid STATX_ATIME Want/got stx_atime{,_ns} STATX_MTIME Want/got stx_mtime{,_ns} STATX_CTIME Want/got stx_ctime{,_ns} STATX_INO Want/got stx_ino STATX_SIZE Want/got stx_size STATX_BLOCKS Want/got stx_blocks STATX_BASIC_STATS [The stuff in the normal stat struct] STATX_BTIME Want/got stx_btime{,_ns} STATX_ALL [All currently available stuff] stx_btime is the file creation time, stx_mask is a bitmask indicating the data provided and __spares*[] are where as-yet undefined fields can be placed. Time fields are structures with separate seconds and nanoseconds fields plus a reserved field in case we want to add even finer resolution. Note that times will be negative if before 1970; in such a case, the nanosecond fields will also be negative if not zero. The bits defined in the stx_attributes field convey information about a file, how it is accessed, where it is and what it does. The following attributes map to FS_*_FL flags and are the same numerical value: STATX_ATTR_COMPRESSED File is compressed by the fs STATX_ATTR_IMMUTABLE File is marked immutable STATX_ATTR_APPEND File is append-only STATX_ATTR_NODUMP File is not to be dumped STATX_ATTR_ENCRYPTED File requires key to decrypt in fs Within the kernel, the supported flags are listed by: KSTAT_ATTR_FS_IOC_FLAGS [Are any other IOC flags of sufficient general interest to be exposed through this interface?] New flags include: STATX_ATTR_AUTOMOUNT Object is an automount trigger These are for the use of GUI tools that might want to mark files specially, depending on what they are. Fields in struct statx come in a number of classes: (0) stx_dev_*, stx_blksize. These are local system information and are always available. (1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino, stx_size, stx_blocks. These will be returned whether the caller asks for them or not. The corresponding bits in stx_mask will be set to indicate whether they actually have valid values. If the caller didn't ask for them, then they may be approximated. For example, NFS won't waste any time updating them from the server, unless as a byproduct of updating something requested. If the values don't actually exist for the underlying object (such as UID or GID on a DOS file), then the bit won't be set in the stx_mask, even if the caller asked for the value. In such a case, the returned value will be a fabrication. Note that there are instances where the type might not be valid, for instance Windows reparse points. (2) stx_rdev_*. This will be set only if stx_mode indicates we're looking at a blockdev or a chardev, otherwise will be 0. (3) stx_btime. Similar to (1), except this will be set to 0 if it doesn't exist. ======= TESTING ======= The following test program can be used to test the statx system call: samples/statx/test-statx.c Just compile and run, passing it paths to the files you want to examine. The file is built automatically if CONFIG_SAMPLES is enabled. Here's some example output. Firstly, an NFS directory that crosses to another FSID. Note that the AUTOMOUNT attribute is set because transiting this directory will cause d_automount to be invoked by the VFS. [root@andromeda ~]# /tmp/test-statx -A /warthog/data statx(/warthog/data) = 0 results=7ff Size: 4096 Blocks: 8 IO Block: 1048576 directory Device: 00:26 Inode: 1703937 Links: 125 Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041 Access: 2016-11-24 09:02:12.219699527+0000 Modify: 2016-11-17 10:44:36.225653653+0000 Change: 2016-11-17 10:44:36.225653653+0000 Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------) Secondly, the result of automounting on that directory. [root@andromeda ~]# /tmp/test-statx /warthog/data statx(/warthog/data) = 0 results=7ff Size: 4096 Blocks: 8 IO Block: 1048576 directory Device: 00:27 Inode: 2 Links: 125 Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041 Access: 2016-11-24 09:02:12.219699527+0000 Modify: 2016-11-17 10:44:36.225653653+0000 Change: 2016-11-17 10:44:36.225653653+0000 Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-01-31 23:46:22 +07:00
static int shmem_getattr(const struct path *path, struct kstat *stat,
u32 request_mask, unsigned int query_flags)
{
statx: Add a system call to make enhanced file info available Add a system call to make extended file information available, including file creation and some attribute flags where available through the underlying filesystem. The getattr inode operation is altered to take two additional arguments: a u32 request_mask and an unsigned int flags that indicate the synchronisation mode. This change is propagated to the vfs_getattr*() function. Functions like vfs_stat() are now inline wrappers around new functions vfs_statx() and vfs_statx_fd() to reduce stack usage. ======== OVERVIEW ======== The idea was initially proposed as a set of xattrs that could be retrieved with getxattr(), but the general preference proved to be for a new syscall with an extended stat structure. A number of requests were gathered for features to be included. The following have been included: (1) Make the fields a consistent size on all arches and make them large. (2) Spare space, request flags and information flags are provided for future expansion. (3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an __s64). (4) Creation time: The SMB protocol carries the creation time, which could be exported by Samba, which will in turn help CIFS make use of FS-Cache as that can be used for coherency data (stx_btime). This is also specified in NFSv4 as a recommended attribute and could be exported by NFSD [Steve French]. (5) Lightweight stat: Ask for just those details of interest, and allow a netfs (such as NFS) to approximate anything not of interest, possibly without going to the server [Trond Myklebust, Ulrich Drepper, Andreas Dilger] (AT_STATX_DONT_SYNC). (6) Heavyweight stat: Force a netfs to go to the server, even if it thinks its cached attributes are up to date [Trond Myklebust] (AT_STATX_FORCE_SYNC). And the following have been left out for future extension: (7) Data version number: Could be used by userspace NFS servers [Aneesh Kumar]. Can also be used to modify fill_post_wcc() in NFSD which retrieves i_version directly, but has just called vfs_getattr(). It could get it from the kstat struct if it used vfs_xgetattr() instead. (There's disagreement on the exact semantics of a single field, since not all filesystems do this the same way). (8) BSD stat compatibility: Including more fields from the BSD stat such as creation time (st_btime) and inode generation number (st_gen) [Jeremy Allison, Bernd Schubert]. (9) Inode generation number: Useful for FUSE and userspace NFS servers [Bernd Schubert]. (This was asked for but later deemed unnecessary with the open-by-handle capability available and caused disagreement as to whether it's a security hole or not). (10) Extra coherency data may be useful in making backups [Andreas Dilger]. (No particular data were offered, but things like last backup timestamp, the data version number and the DOS archive bit would come into this category). (11) Allow the filesystem to indicate what it can/cannot provide: A filesystem can now say it doesn't support a standard stat feature if that isn't available, so if, for instance, inode numbers or UIDs don't exist or are fabricated locally... (This requires a separate system call - I have an fsinfo() call idea for this). (12) Store a 16-byte volume ID in the superblock that can be returned in struct xstat [Steve French]. (Deferred to fsinfo). (13) Include granularity fields in the time data to indicate the granularity of each of the times (NFSv4 time_delta) [Steve French]. (Deferred to fsinfo). (14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags. Note that the Linux IOC flags are a mess and filesystems such as Ext4 define flags that aren't in linux/fs.h, so translation in the kernel may be a necessity (or, possibly, we provide the filesystem type too). (Some attributes are made available in stx_attributes, but the general feeling was that the IOC flags were to ext[234]-specific and shouldn't be exposed through statx this way). (15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer, Michael Kerrisk]. (Deferred, probably to fsinfo. Finding out if there's an ACL or seclabal might require extra filesystem operations). (16) Femtosecond-resolution timestamps [Dave Chinner]. (A __reserved field has been left in the statx_timestamp struct for this - if there proves to be a need). (17) A set multiple attributes syscall to go with this. =============== NEW SYSTEM CALL =============== The new system call is: int ret = statx(int dfd, const char *filename, unsigned int flags, unsigned int mask, struct statx *buffer); The dfd, filename and flags parameters indicate the file to query, in a similar way to fstatat(). There is no equivalent of lstat() as that can be emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is also no equivalent of fstat() as that can be emulated by passing a NULL filename to statx() with the fd of interest in dfd. Whether or not statx() synchronises the attributes with the backing store can be controlled by OR'ing a value into the flags argument (this typically only affects network filesystems): (1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this respect. (2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise its attributes with the server - which might require data writeback to occur to get the timestamps correct. (3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a network filesystem. The resulting values should be considered approximate. mask is a bitmask indicating the fields in struct statx that are of interest to the caller. The user should set this to STATX_BASIC_STATS to get the basic set returned by stat(). It should be noted that asking for more information may entail extra I/O operations. buffer points to the destination for the data. This must be 256 bytes in size. ====================== MAIN ATTRIBUTES RECORD ====================== The following structures are defined in which to return the main attribute set: struct statx_timestamp { __s64 tv_sec; __s32 tv_nsec; __s32 __reserved; }; struct statx { __u32 stx_mask; __u32 stx_blksize; __u64 stx_attributes; __u32 stx_nlink; __u32 stx_uid; __u32 stx_gid; __u16 stx_mode; __u16 __spare0[1]; __u64 stx_ino; __u64 stx_size; __u64 stx_blocks; __u64 __spare1[1]; struct statx_timestamp stx_atime; struct statx_timestamp stx_btime; struct statx_timestamp stx_ctime; struct statx_timestamp stx_mtime; __u32 stx_rdev_major; __u32 stx_rdev_minor; __u32 stx_dev_major; __u32 stx_dev_minor; __u64 __spare2[14]; }; The defined bits in request_mask and stx_mask are: STATX_TYPE Want/got stx_mode & S_IFMT STATX_MODE Want/got stx_mode & ~S_IFMT STATX_NLINK Want/got stx_nlink STATX_UID Want/got stx_uid STATX_GID Want/got stx_gid STATX_ATIME Want/got stx_atime{,_ns} STATX_MTIME Want/got stx_mtime{,_ns} STATX_CTIME Want/got stx_ctime{,_ns} STATX_INO Want/got stx_ino STATX_SIZE Want/got stx_size STATX_BLOCKS Want/got stx_blocks STATX_BASIC_STATS [The stuff in the normal stat struct] STATX_BTIME Want/got stx_btime{,_ns} STATX_ALL [All currently available stuff] stx_btime is the file creation time, stx_mask is a bitmask indicating the data provided and __spares*[] are where as-yet undefined fields can be placed. Time fields are structures with separate seconds and nanoseconds fields plus a reserved field in case we want to add even finer resolution. Note that times will be negative if before 1970; in such a case, the nanosecond fields will also be negative if not zero. The bits defined in the stx_attributes field convey information about a file, how it is accessed, where it is and what it does. The following attributes map to FS_*_FL flags and are the same numerical value: STATX_ATTR_COMPRESSED File is compressed by the fs STATX_ATTR_IMMUTABLE File is marked immutable STATX_ATTR_APPEND File is append-only STATX_ATTR_NODUMP File is not to be dumped STATX_ATTR_ENCRYPTED File requires key to decrypt in fs Within the kernel, the supported flags are listed by: KSTAT_ATTR_FS_IOC_FLAGS [Are any other IOC flags of sufficient general interest to be exposed through this interface?] New flags include: STATX_ATTR_AUTOMOUNT Object is an automount trigger These are for the use of GUI tools that might want to mark files specially, depending on what they are. Fields in struct statx come in a number of classes: (0) stx_dev_*, stx_blksize. These are local system information and are always available. (1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino, stx_size, stx_blocks. These will be returned whether the caller asks for them or not. The corresponding bits in stx_mask will be set to indicate whether they actually have valid values. If the caller didn't ask for them, then they may be approximated. For example, NFS won't waste any time updating them from the server, unless as a byproduct of updating something requested. If the values don't actually exist for the underlying object (such as UID or GID on a DOS file), then the bit won't be set in the stx_mask, even if the caller asked for the value. In such a case, the returned value will be a fabrication. Note that there are instances where the type might not be valid, for instance Windows reparse points. (2) stx_rdev_*. This will be set only if stx_mode indicates we're looking at a blockdev or a chardev, otherwise will be 0. (3) stx_btime. Similar to (1), except this will be set to 0 if it doesn't exist. ======= TESTING ======= The following test program can be used to test the statx system call: samples/statx/test-statx.c Just compile and run, passing it paths to the files you want to examine. The file is built automatically if CONFIG_SAMPLES is enabled. Here's some example output. Firstly, an NFS directory that crosses to another FSID. Note that the AUTOMOUNT attribute is set because transiting this directory will cause d_automount to be invoked by the VFS. [root@andromeda ~]# /tmp/test-statx -A /warthog/data statx(/warthog/data) = 0 results=7ff Size: 4096 Blocks: 8 IO Block: 1048576 directory Device: 00:26 Inode: 1703937 Links: 125 Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041 Access: 2016-11-24 09:02:12.219699527+0000 Modify: 2016-11-17 10:44:36.225653653+0000 Change: 2016-11-17 10:44:36.225653653+0000 Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------) Secondly, the result of automounting on that directory. [root@andromeda ~]# /tmp/test-statx /warthog/data statx(/warthog/data) = 0 results=7ff Size: 4096 Blocks: 8 IO Block: 1048576 directory Device: 00:27 Inode: 2 Links: 125 Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041 Access: 2016-11-24 09:02:12.219699527+0000 Modify: 2016-11-17 10:44:36.225653653+0000 Change: 2016-11-17 10:44:36.225653653+0000 Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-01-31 23:46:22 +07:00
struct inode *inode = path->dentry->d_inode;
struct shmem_inode_info *info = SHMEM_I(inode);
mm: shmem: make stat.st_blksize return huge page size if THP is on Since tmpfs THP was supported in 4.8, hugetlbfs is not the only filesystem with huge page support anymore. tmpfs can use huge page via THP when mounting by "huge=" mount option. When applications use huge page on hugetlbfs, it just need check the filesystem magic number, but it is not enough for tmpfs. Make stat.st_blksize return huge page size if it is mounted by appropriate "huge=" option to give applications a hint to optimize the behavior with THP. Some applications may not do wisely with THP. For example, QEMU may mmap file on non huge page aligned hint address with MAP_FIXED, which results in no pages are PMD mapped even though THP is used. Some applications may mmap file with non huge page aligned offset. Both behaviors make THP pointless. statfs.f_bsize still returns 4KB for tmpfs since THP could be split, and it also may fallback to 4KB page silently if there is not enough huge page. Furthermore, different f_bsize makes max_blocks and free_blocks calculation harder but without too much benefit. Returning huge page size via stat.st_blksize sounds good enough. Since PUD size huge page for THP has not been supported, now it just returns HPAGE_PMD_SIZE. Hugh said: : Sorry, I have no enthusiasm for this patch; but do I feel strongly : enough to override you and everyone else to NAK it? No, I don't feel : that strongly, maybe st_blksize isn't worth arguing over. : : We did look at struct stat when designing huge tmpfs, to see if there : were any fields that should be adjusted for it; but concluded none. : Yes, it would sometimes be nice to have a quickly accessible indicator : for when tmpfs has been mounted huge (scanning /proc/mounts for options : can be tiresome, agreed); but since tmpfs tries to supply huge (or not) : pages transparently, no difference seemed right. : : So, because st_blksize is a not very useful field of struct stat, with : "size" in the name, we're going to put HPAGE_PMD_SIZE in there instead : of PAGE_SIZE, if the tmpfs was mounted with one of the huge "huge" : options (force or always, okay; within_size or advise, not so much). : Though HPAGE_PMD_SIZE is no more its "preferred I/O size" or "blocksize : for file system I/O" than PAGE_SIZE was. : : Which we can expect to speed up some applications and disadvantage : others, depending on how they interpret st_blksize: just like if we : changed it in the same way on non-huge tmpfs. (Did I actually try : changing st_blksize early on, and find it broke something? If so, I've : now forgotten what, and a search through commit messages didn't find : it; but I guess we'll find out soon enough.) : : If there were an mstat() syscall, returning a field "preferred : alignment", then we could certainly agree to put HPAGE_PMD_SIZE in : there; but in stat()'s st_blksize? And what happens when (in future) : mm maps this or that hard-disk filesystem's blocks with a pmd mapping - : should that filesystem then advertise a bigger st_blksize, despite the : same disk layout as before? What happens with DAX? : : And this change is not going to help the QEMU suboptimality that : brought you here (or does QEMU align mmaps according to st_blksize?). : QEMU ought to work well with kernels without this change, and kernels : with this change; and I hope it can easily deal with both by avoiding : that use of MAP_FIXED which prevented the kernel's intended alignment. [akpm@linux-foundation.org: remove unneeded `else'] Link: http://lkml.kernel.org/r/1524665633-83806-1-git-send-email-yang.shi@linux.alibaba.com Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Suggested-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-08 07:06:59 +07:00
struct shmem_sb_info *sb_info = SHMEM_SB(inode->i_sb);
tmpfs: avoid a little creat and stat slowdown LKP reports that v4.2 commit afa2db2fb6f1 ("tmpfs: truncate prealloc blocks past i_size") causes a 14.5% slowdown in the AIM9 creat-clo benchmark. creat-clo does just what you'd expect from the name, and creat's O_TRUNC on 0-length file does indeed get into more overhead now shmem_setattr() tests "0 <= 0" instead of "0 < 0". I'm not sure how much we care, but I think it would not be too VW-like to add in a check for whether any pages (or swap) are allocated: if none are allocated, there's none to remove from the radix_tree. At first I thought that check would be good enough for the unmaps too, but no: we should not skip the unlikely case of unmapping pages beyond the new EOF, which were COWed from holes which have now been reclaimed, leaving none. This gives me an 8.5% speedup: on Haswell instead of LKP's Westmere, and running a debug config before and after: I hope those account for the lesser speedup. And probably someone has a benchmark where a thousand threads keep on stat'ing the same file repeatedly: forestall that report by adjusting v4.3 commit 44a30220bc0a ("shmem: recalculate file inode when fstat") not to take the spinlock in shmem_getattr() when there's no work to do. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Ying Huang <ying.huang@linux.intel.com> Tested-by: Ying Huang <ying.huang@linux.intel.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 09:50:34 +07:00
if (info->alloced - info->swapped != inode->i_mapping->nrpages) {
spin_lock_irq(&info->lock);
tmpfs: avoid a little creat and stat slowdown LKP reports that v4.2 commit afa2db2fb6f1 ("tmpfs: truncate prealloc blocks past i_size") causes a 14.5% slowdown in the AIM9 creat-clo benchmark. creat-clo does just what you'd expect from the name, and creat's O_TRUNC on 0-length file does indeed get into more overhead now shmem_setattr() tests "0 <= 0" instead of "0 < 0". I'm not sure how much we care, but I think it would not be too VW-like to add in a check for whether any pages (or swap) are allocated: if none are allocated, there's none to remove from the radix_tree. At first I thought that check would be good enough for the unmaps too, but no: we should not skip the unlikely case of unmapping pages beyond the new EOF, which were COWed from holes which have now been reclaimed, leaving none. This gives me an 8.5% speedup: on Haswell instead of LKP's Westmere, and running a debug config before and after: I hope those account for the lesser speedup. And probably someone has a benchmark where a thousand threads keep on stat'ing the same file repeatedly: forestall that report by adjusting v4.3 commit 44a30220bc0a ("shmem: recalculate file inode when fstat") not to take the spinlock in shmem_getattr() when there's no work to do. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Ying Huang <ying.huang@linux.intel.com> Tested-by: Ying Huang <ying.huang@linux.intel.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 09:50:34 +07:00
shmem_recalc_inode(inode);
spin_unlock_irq(&info->lock);
tmpfs: avoid a little creat and stat slowdown LKP reports that v4.2 commit afa2db2fb6f1 ("tmpfs: truncate prealloc blocks past i_size") causes a 14.5% slowdown in the AIM9 creat-clo benchmark. creat-clo does just what you'd expect from the name, and creat's O_TRUNC on 0-length file does indeed get into more overhead now shmem_setattr() tests "0 <= 0" instead of "0 < 0". I'm not sure how much we care, but I think it would not be too VW-like to add in a check for whether any pages (or swap) are allocated: if none are allocated, there's none to remove from the radix_tree. At first I thought that check would be good enough for the unmaps too, but no: we should not skip the unlikely case of unmapping pages beyond the new EOF, which were COWed from holes which have now been reclaimed, leaving none. This gives me an 8.5% speedup: on Haswell instead of LKP's Westmere, and running a debug config before and after: I hope those account for the lesser speedup. And probably someone has a benchmark where a thousand threads keep on stat'ing the same file repeatedly: forestall that report by adjusting v4.3 commit 44a30220bc0a ("shmem: recalculate file inode when fstat") not to take the spinlock in shmem_getattr() when there's no work to do. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Ying Huang <ying.huang@linux.intel.com> Tested-by: Ying Huang <ying.huang@linux.intel.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 09:50:34 +07:00
}
generic_fillattr(inode, stat);
mm: shmem: make stat.st_blksize return huge page size if THP is on Since tmpfs THP was supported in 4.8, hugetlbfs is not the only filesystem with huge page support anymore. tmpfs can use huge page via THP when mounting by "huge=" mount option. When applications use huge page on hugetlbfs, it just need check the filesystem magic number, but it is not enough for tmpfs. Make stat.st_blksize return huge page size if it is mounted by appropriate "huge=" option to give applications a hint to optimize the behavior with THP. Some applications may not do wisely with THP. For example, QEMU may mmap file on non huge page aligned hint address with MAP_FIXED, which results in no pages are PMD mapped even though THP is used. Some applications may mmap file with non huge page aligned offset. Both behaviors make THP pointless. statfs.f_bsize still returns 4KB for tmpfs since THP could be split, and it also may fallback to 4KB page silently if there is not enough huge page. Furthermore, different f_bsize makes max_blocks and free_blocks calculation harder but without too much benefit. Returning huge page size via stat.st_blksize sounds good enough. Since PUD size huge page for THP has not been supported, now it just returns HPAGE_PMD_SIZE. Hugh said: : Sorry, I have no enthusiasm for this patch; but do I feel strongly : enough to override you and everyone else to NAK it? No, I don't feel : that strongly, maybe st_blksize isn't worth arguing over. : : We did look at struct stat when designing huge tmpfs, to see if there : were any fields that should be adjusted for it; but concluded none. : Yes, it would sometimes be nice to have a quickly accessible indicator : for when tmpfs has been mounted huge (scanning /proc/mounts for options : can be tiresome, agreed); but since tmpfs tries to supply huge (or not) : pages transparently, no difference seemed right. : : So, because st_blksize is a not very useful field of struct stat, with : "size" in the name, we're going to put HPAGE_PMD_SIZE in there instead : of PAGE_SIZE, if the tmpfs was mounted with one of the huge "huge" : options (force or always, okay; within_size or advise, not so much). : Though HPAGE_PMD_SIZE is no more its "preferred I/O size" or "blocksize : for file system I/O" than PAGE_SIZE was. : : Which we can expect to speed up some applications and disadvantage : others, depending on how they interpret st_blksize: just like if we : changed it in the same way on non-huge tmpfs. (Did I actually try : changing st_blksize early on, and find it broke something? If so, I've : now forgotten what, and a search through commit messages didn't find : it; but I guess we'll find out soon enough.) : : If there were an mstat() syscall, returning a field "preferred : alignment", then we could certainly agree to put HPAGE_PMD_SIZE in : there; but in stat()'s st_blksize? And what happens when (in future) : mm maps this or that hard-disk filesystem's blocks with a pmd mapping - : should that filesystem then advertise a bigger st_blksize, despite the : same disk layout as before? What happens with DAX? : : And this change is not going to help the QEMU suboptimality that : brought you here (or does QEMU align mmaps according to st_blksize?). : QEMU ought to work well with kernels without this change, and kernels : with this change; and I hope it can easily deal with both by avoiding : that use of MAP_FIXED which prevented the kernel's intended alignment. [akpm@linux-foundation.org: remove unneeded `else'] Link: http://lkml.kernel.org/r/1524665633-83806-1-git-send-email-yang.shi@linux.alibaba.com Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Suggested-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-08 07:06:59 +07:00
if (is_huge_enabled(sb_info))
stat->blksize = HPAGE_PMD_SIZE;
return 0;
}
tmpfs: take control of its truncate_range 2.6.35's new truncate convention gave tmpfs the opportunity to control its file truncation, no longer enforced from outside by vmtruncate(). We shall want to build upon that, to handle pagecache and swap together. Slightly redefine the ->truncate_range interface: let it now be called between the unmap_mapping_range()s, with the filesystem responsible for doing the truncate_inode_pages_range() from it - just as the filesystem is nowadays responsible for doing that from its ->setattr. Let's rename shmem_notify_change() to shmem_setattr(). Instead of calling the generic truncate_setsize(), bring that code in so we can call shmem_truncate_range() - which will later be updated to perform its own variant of truncate_inode_pages_range(). Remove the punch_hole unmap_mapping_range() from shmem_truncate_range(): now that the COW's unmap_mapping_range() comes after ->truncate_range, there is no need to call it a third time. Export shmem_truncate_range() and add it to the list in shmem_fs.h, so that i915_gem_object_truncate() can call it explicitly in future; get this patch in first, then update drm/i915 once this is available (until then, i915 will just be doing the truncate_inode_pages() twice). Though introduced five years ago, no other filesystem is implementing ->truncate_range, and its only other user is madvise(,,MADV_REMOVE): we expect to convert it to fallocate(,FALLOC_FL_PUNCH_HOLE,,) shortly, whereupon ->truncate_range can be removed from inode_operations - shmem_truncate_range() will help i915 across that transition too. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-28 06:18:03 +07:00
static int shmem_setattr(struct dentry *dentry, struct iattr *attr)
{
struct inode *inode = d_inode(dentry);
shm: add sealing API If two processes share a common memory region, they usually want some guarantees to allow safe access. This often includes: - one side cannot overwrite data while the other reads it - one side cannot shrink the buffer while the other accesses it - one side cannot grow the buffer beyond previously set boundaries If there is a trust-relationship between both parties, there is no need for policy enforcement. However, if there's no trust relationship (eg., for general-purpose IPC) sharing memory-regions is highly fragile and often not possible without local copies. Look at the following two use-cases: 1) A graphics client wants to share its rendering-buffer with a graphics-server. The memory-region is allocated by the client for read/write access and a second FD is passed to the server. While scanning out from the memory region, the server has no guarantee that the client doesn't shrink the buffer at any time, requiring rather cumbersome SIGBUS handling. 2) A process wants to perform an RPC on another process. To avoid huge bandwidth consumption, zero-copy is preferred. After a message is assembled in-memory and a FD is passed to the remote side, both sides want to be sure that neither modifies this shared copy, anymore. The source may have put sensible data into the message without a separate copy and the target may want to parse the message inline, to avoid a local copy. While SIGBUS handling, POSIX mandatory locking and MAP_DENYWRITE provide ways to achieve most of this, the first one is unproportionally ugly to use in libraries and the latter two are broken/racy or even disabled due to denial of service attacks. This patch introduces the concept of SEALING. If you seal a file, a specific set of operations is blocked on that file forever. Unlike locks, seals can only be set, never removed. Hence, once you verified a specific set of seals is set, you're guaranteed that no-one can perform the blocked operations on this file, anymore. An initial set of SEALS is introduced by this patch: - SHRINK: If SEAL_SHRINK is set, the file in question cannot be reduced in size. This affects ftruncate() and open(O_TRUNC). - GROW: If SEAL_GROW is set, the file in question cannot be increased in size. This affects ftruncate(), fallocate() and write(). - WRITE: If SEAL_WRITE is set, no write operations (besides resizing) are possible. This affects fallocate(PUNCH_HOLE), mmap() and write(). - SEAL: If SEAL_SEAL is set, no further seals can be added to a file. This basically prevents the F_ADD_SEAL operation on a file and can be set to prevent others from adding further seals that you don't want. The described use-cases can easily use these seals to provide safe use without any trust-relationship: 1) The graphics server can verify that a passed file-descriptor has SEAL_SHRINK set. This allows safe scanout, while the client is allowed to increase buffer size for window-resizing on-the-fly. Concurrent writes are explicitly allowed. 2) For general-purpose IPC, both processes can verify that SEAL_SHRINK, SEAL_GROW and SEAL_WRITE are set. This guarantees that neither process can modify the data while the other side parses it. Furthermore, it guarantees that even with writable FDs passed to the peer, it cannot increase the size to hit memory-limits of the source process (in case the file-storage is accounted to the source). The new API is an extension to fcntl(), adding two new commands: F_GET_SEALS: Return a bitset describing the seals on the file. This can be called on any FD if the underlying file supports sealing. F_ADD_SEALS: Change the seals of a given file. This requires WRITE access to the file and F_SEAL_SEAL may not already be set. Furthermore, the underlying file must support sealing and there may not be any existing shared mapping of that file. Otherwise, EBADF/EPERM is returned. The given seals are _added_ to the existing set of seals on the file. You cannot remove seals again. The fcntl() handler is currently specific to shmem and disabled on all files. A file needs to explicitly support sealing for this interface to work. A separate syscall is added in a follow-up, which creates files that support sealing. There is no intention to support this on other file-systems. Semantics are unclear for non-volatile files and we lack any use-case right now. Therefore, the implementation is specific to shmem. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ryan Lortie <desrt@desrt.ca> Cc: Lennart Poettering <lennart@poettering.net> Cc: Daniel Mack <zonque@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 04:25:27 +07:00
struct shmem_inode_info *info = SHMEM_I(inode);
struct shmem_sb_info *sbinfo = SHMEM_SB(inode->i_sb);
int error;
error = setattr_prepare(dentry, attr);
if (error)
return error;
tmpfs: take control of its truncate_range 2.6.35's new truncate convention gave tmpfs the opportunity to control its file truncation, no longer enforced from outside by vmtruncate(). We shall want to build upon that, to handle pagecache and swap together. Slightly redefine the ->truncate_range interface: let it now be called between the unmap_mapping_range()s, with the filesystem responsible for doing the truncate_inode_pages_range() from it - just as the filesystem is nowadays responsible for doing that from its ->setattr. Let's rename shmem_notify_change() to shmem_setattr(). Instead of calling the generic truncate_setsize(), bring that code in so we can call shmem_truncate_range() - which will later be updated to perform its own variant of truncate_inode_pages_range(). Remove the punch_hole unmap_mapping_range() from shmem_truncate_range(): now that the COW's unmap_mapping_range() comes after ->truncate_range, there is no need to call it a third time. Export shmem_truncate_range() and add it to the list in shmem_fs.h, so that i915_gem_object_truncate() can call it explicitly in future; get this patch in first, then update drm/i915 once this is available (until then, i915 will just be doing the truncate_inode_pages() twice). Though introduced five years ago, no other filesystem is implementing ->truncate_range, and its only other user is madvise(,,MADV_REMOVE): we expect to convert it to fallocate(,FALLOC_FL_PUNCH_HOLE,,) shortly, whereupon ->truncate_range can be removed from inode_operations - shmem_truncate_range() will help i915 across that transition too. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-28 06:18:03 +07:00
if (S_ISREG(inode->i_mode) && (attr->ia_valid & ATTR_SIZE)) {
loff_t oldsize = inode->i_size;
loff_t newsize = attr->ia_size;
shm: add sealing API If two processes share a common memory region, they usually want some guarantees to allow safe access. This often includes: - one side cannot overwrite data while the other reads it - one side cannot shrink the buffer while the other accesses it - one side cannot grow the buffer beyond previously set boundaries If there is a trust-relationship between both parties, there is no need for policy enforcement. However, if there's no trust relationship (eg., for general-purpose IPC) sharing memory-regions is highly fragile and often not possible without local copies. Look at the following two use-cases: 1) A graphics client wants to share its rendering-buffer with a graphics-server. The memory-region is allocated by the client for read/write access and a second FD is passed to the server. While scanning out from the memory region, the server has no guarantee that the client doesn't shrink the buffer at any time, requiring rather cumbersome SIGBUS handling. 2) A process wants to perform an RPC on another process. To avoid huge bandwidth consumption, zero-copy is preferred. After a message is assembled in-memory and a FD is passed to the remote side, both sides want to be sure that neither modifies this shared copy, anymore. The source may have put sensible data into the message without a separate copy and the target may want to parse the message inline, to avoid a local copy. While SIGBUS handling, POSIX mandatory locking and MAP_DENYWRITE provide ways to achieve most of this, the first one is unproportionally ugly to use in libraries and the latter two are broken/racy or even disabled due to denial of service attacks. This patch introduces the concept of SEALING. If you seal a file, a specific set of operations is blocked on that file forever. Unlike locks, seals can only be set, never removed. Hence, once you verified a specific set of seals is set, you're guaranteed that no-one can perform the blocked operations on this file, anymore. An initial set of SEALS is introduced by this patch: - SHRINK: If SEAL_SHRINK is set, the file in question cannot be reduced in size. This affects ftruncate() and open(O_TRUNC). - GROW: If SEAL_GROW is set, the file in question cannot be increased in size. This affects ftruncate(), fallocate() and write(). - WRITE: If SEAL_WRITE is set, no write operations (besides resizing) are possible. This affects fallocate(PUNCH_HOLE), mmap() and write(). - SEAL: If SEAL_SEAL is set, no further seals can be added to a file. This basically prevents the F_ADD_SEAL operation on a file and can be set to prevent others from adding further seals that you don't want. The described use-cases can easily use these seals to provide safe use without any trust-relationship: 1) The graphics server can verify that a passed file-descriptor has SEAL_SHRINK set. This allows safe scanout, while the client is allowed to increase buffer size for window-resizing on-the-fly. Concurrent writes are explicitly allowed. 2) For general-purpose IPC, both processes can verify that SEAL_SHRINK, SEAL_GROW and SEAL_WRITE are set. This guarantees that neither process can modify the data while the other side parses it. Furthermore, it guarantees that even with writable FDs passed to the peer, it cannot increase the size to hit memory-limits of the source process (in case the file-storage is accounted to the source). The new API is an extension to fcntl(), adding two new commands: F_GET_SEALS: Return a bitset describing the seals on the file. This can be called on any FD if the underlying file supports sealing. F_ADD_SEALS: Change the seals of a given file. This requires WRITE access to the file and F_SEAL_SEAL may not already be set. Furthermore, the underlying file must support sealing and there may not be any existing shared mapping of that file. Otherwise, EBADF/EPERM is returned. The given seals are _added_ to the existing set of seals on the file. You cannot remove seals again. The fcntl() handler is currently specific to shmem and disabled on all files. A file needs to explicitly support sealing for this interface to work. A separate syscall is added in a follow-up, which creates files that support sealing. There is no intention to support this on other file-systems. Semantics are unclear for non-volatile files and we lack any use-case right now. Therefore, the implementation is specific to shmem. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ryan Lortie <desrt@desrt.ca> Cc: Lennart Poettering <lennart@poettering.net> Cc: Daniel Mack <zonque@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 04:25:27 +07:00
/* protected by i_mutex */
if ((newsize < oldsize && (info->seals & F_SEAL_SHRINK)) ||
(newsize > oldsize && (info->seals & F_SEAL_GROW)))
return -EPERM;
tmpfs: take control of its truncate_range 2.6.35's new truncate convention gave tmpfs the opportunity to control its file truncation, no longer enforced from outside by vmtruncate(). We shall want to build upon that, to handle pagecache and swap together. Slightly redefine the ->truncate_range interface: let it now be called between the unmap_mapping_range()s, with the filesystem responsible for doing the truncate_inode_pages_range() from it - just as the filesystem is nowadays responsible for doing that from its ->setattr. Let's rename shmem_notify_change() to shmem_setattr(). Instead of calling the generic truncate_setsize(), bring that code in so we can call shmem_truncate_range() - which will later be updated to perform its own variant of truncate_inode_pages_range(). Remove the punch_hole unmap_mapping_range() from shmem_truncate_range(): now that the COW's unmap_mapping_range() comes after ->truncate_range, there is no need to call it a third time. Export shmem_truncate_range() and add it to the list in shmem_fs.h, so that i915_gem_object_truncate() can call it explicitly in future; get this patch in first, then update drm/i915 once this is available (until then, i915 will just be doing the truncate_inode_pages() twice). Though introduced five years ago, no other filesystem is implementing ->truncate_range, and its only other user is madvise(,,MADV_REMOVE): we expect to convert it to fallocate(,FALLOC_FL_PUNCH_HOLE,,) shortly, whereupon ->truncate_range can be removed from inode_operations - shmem_truncate_range() will help i915 across that transition too. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-28 06:18:03 +07:00
if (newsize != oldsize) {
error = shmem_reacct_size(SHMEM_I(inode)->flags,
oldsize, newsize);
if (error)
return error;
tmpfs: take control of its truncate_range 2.6.35's new truncate convention gave tmpfs the opportunity to control its file truncation, no longer enforced from outside by vmtruncate(). We shall want to build upon that, to handle pagecache and swap together. Slightly redefine the ->truncate_range interface: let it now be called between the unmap_mapping_range()s, with the filesystem responsible for doing the truncate_inode_pages_range() from it - just as the filesystem is nowadays responsible for doing that from its ->setattr. Let's rename shmem_notify_change() to shmem_setattr(). Instead of calling the generic truncate_setsize(), bring that code in so we can call shmem_truncate_range() - which will later be updated to perform its own variant of truncate_inode_pages_range(). Remove the punch_hole unmap_mapping_range() from shmem_truncate_range(): now that the COW's unmap_mapping_range() comes after ->truncate_range, there is no need to call it a third time. Export shmem_truncate_range() and add it to the list in shmem_fs.h, so that i915_gem_object_truncate() can call it explicitly in future; get this patch in first, then update drm/i915 once this is available (until then, i915 will just be doing the truncate_inode_pages() twice). Though introduced five years ago, no other filesystem is implementing ->truncate_range, and its only other user is madvise(,,MADV_REMOVE): we expect to convert it to fallocate(,FALLOC_FL_PUNCH_HOLE,,) shortly, whereupon ->truncate_range can be removed from inode_operations - shmem_truncate_range() will help i915 across that transition too. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-28 06:18:03 +07:00
i_size_write(inode, newsize);
inode->i_ctime = inode->i_mtime = current_time(inode);
tmpfs: take control of its truncate_range 2.6.35's new truncate convention gave tmpfs the opportunity to control its file truncation, no longer enforced from outside by vmtruncate(). We shall want to build upon that, to handle pagecache and swap together. Slightly redefine the ->truncate_range interface: let it now be called between the unmap_mapping_range()s, with the filesystem responsible for doing the truncate_inode_pages_range() from it - just as the filesystem is nowadays responsible for doing that from its ->setattr. Let's rename shmem_notify_change() to shmem_setattr(). Instead of calling the generic truncate_setsize(), bring that code in so we can call shmem_truncate_range() - which will later be updated to perform its own variant of truncate_inode_pages_range(). Remove the punch_hole unmap_mapping_range() from shmem_truncate_range(): now that the COW's unmap_mapping_range() comes after ->truncate_range, there is no need to call it a third time. Export shmem_truncate_range() and add it to the list in shmem_fs.h, so that i915_gem_object_truncate() can call it explicitly in future; get this patch in first, then update drm/i915 once this is available (until then, i915 will just be doing the truncate_inode_pages() twice). Though introduced five years ago, no other filesystem is implementing ->truncate_range, and its only other user is madvise(,,MADV_REMOVE): we expect to convert it to fallocate(,FALLOC_FL_PUNCH_HOLE,,) shortly, whereupon ->truncate_range can be removed from inode_operations - shmem_truncate_range() will help i915 across that transition too. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-28 06:18:03 +07:00
}
if (newsize <= oldsize) {
tmpfs: take control of its truncate_range 2.6.35's new truncate convention gave tmpfs the opportunity to control its file truncation, no longer enforced from outside by vmtruncate(). We shall want to build upon that, to handle pagecache and swap together. Slightly redefine the ->truncate_range interface: let it now be called between the unmap_mapping_range()s, with the filesystem responsible for doing the truncate_inode_pages_range() from it - just as the filesystem is nowadays responsible for doing that from its ->setattr. Let's rename shmem_notify_change() to shmem_setattr(). Instead of calling the generic truncate_setsize(), bring that code in so we can call shmem_truncate_range() - which will later be updated to perform its own variant of truncate_inode_pages_range(). Remove the punch_hole unmap_mapping_range() from shmem_truncate_range(): now that the COW's unmap_mapping_range() comes after ->truncate_range, there is no need to call it a third time. Export shmem_truncate_range() and add it to the list in shmem_fs.h, so that i915_gem_object_truncate() can call it explicitly in future; get this patch in first, then update drm/i915 once this is available (until then, i915 will just be doing the truncate_inode_pages() twice). Though introduced five years ago, no other filesystem is implementing ->truncate_range, and its only other user is madvise(,,MADV_REMOVE): we expect to convert it to fallocate(,FALLOC_FL_PUNCH_HOLE,,) shortly, whereupon ->truncate_range can be removed from inode_operations - shmem_truncate_range() will help i915 across that transition too. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-28 06:18:03 +07:00
loff_t holebegin = round_up(newsize, PAGE_SIZE);
tmpfs: avoid a little creat and stat slowdown LKP reports that v4.2 commit afa2db2fb6f1 ("tmpfs: truncate prealloc blocks past i_size") causes a 14.5% slowdown in the AIM9 creat-clo benchmark. creat-clo does just what you'd expect from the name, and creat's O_TRUNC on 0-length file does indeed get into more overhead now shmem_setattr() tests "0 <= 0" instead of "0 < 0". I'm not sure how much we care, but I think it would not be too VW-like to add in a check for whether any pages (or swap) are allocated: if none are allocated, there's none to remove from the radix_tree. At first I thought that check would be good enough for the unmaps too, but no: we should not skip the unlikely case of unmapping pages beyond the new EOF, which were COWed from holes which have now been reclaimed, leaving none. This gives me an 8.5% speedup: on Haswell instead of LKP's Westmere, and running a debug config before and after: I hope those account for the lesser speedup. And probably someone has a benchmark where a thousand threads keep on stat'ing the same file repeatedly: forestall that report by adjusting v4.3 commit 44a30220bc0a ("shmem: recalculate file inode when fstat") not to take the spinlock in shmem_getattr() when there's no work to do. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Ying Huang <ying.huang@linux.intel.com> Tested-by: Ying Huang <ying.huang@linux.intel.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 09:50:34 +07:00
if (oldsize > holebegin)
unmap_mapping_range(inode->i_mapping,
holebegin, 0, 1);
if (info->alloced)
shmem_truncate_range(inode,
newsize, (loff_t)-1);
tmpfs: take control of its truncate_range 2.6.35's new truncate convention gave tmpfs the opportunity to control its file truncation, no longer enforced from outside by vmtruncate(). We shall want to build upon that, to handle pagecache and swap together. Slightly redefine the ->truncate_range interface: let it now be called between the unmap_mapping_range()s, with the filesystem responsible for doing the truncate_inode_pages_range() from it - just as the filesystem is nowadays responsible for doing that from its ->setattr. Let's rename shmem_notify_change() to shmem_setattr(). Instead of calling the generic truncate_setsize(), bring that code in so we can call shmem_truncate_range() - which will later be updated to perform its own variant of truncate_inode_pages_range(). Remove the punch_hole unmap_mapping_range() from shmem_truncate_range(): now that the COW's unmap_mapping_range() comes after ->truncate_range, there is no need to call it a third time. Export shmem_truncate_range() and add it to the list in shmem_fs.h, so that i915_gem_object_truncate() can call it explicitly in future; get this patch in first, then update drm/i915 once this is available (until then, i915 will just be doing the truncate_inode_pages() twice). Though introduced five years ago, no other filesystem is implementing ->truncate_range, and its only other user is madvise(,,MADV_REMOVE): we expect to convert it to fallocate(,FALLOC_FL_PUNCH_HOLE,,) shortly, whereupon ->truncate_range can be removed from inode_operations - shmem_truncate_range() will help i915 across that transition too. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-28 06:18:03 +07:00
/* unmap again to remove racily COWed private pages */
tmpfs: avoid a little creat and stat slowdown LKP reports that v4.2 commit afa2db2fb6f1 ("tmpfs: truncate prealloc blocks past i_size") causes a 14.5% slowdown in the AIM9 creat-clo benchmark. creat-clo does just what you'd expect from the name, and creat's O_TRUNC on 0-length file does indeed get into more overhead now shmem_setattr() tests "0 <= 0" instead of "0 < 0". I'm not sure how much we care, but I think it would not be too VW-like to add in a check for whether any pages (or swap) are allocated: if none are allocated, there's none to remove from the radix_tree. At first I thought that check would be good enough for the unmaps too, but no: we should not skip the unlikely case of unmapping pages beyond the new EOF, which were COWed from holes which have now been reclaimed, leaving none. This gives me an 8.5% speedup: on Haswell instead of LKP's Westmere, and running a debug config before and after: I hope those account for the lesser speedup. And probably someone has a benchmark where a thousand threads keep on stat'ing the same file repeatedly: forestall that report by adjusting v4.3 commit 44a30220bc0a ("shmem: recalculate file inode when fstat") not to take the spinlock in shmem_getattr() when there's no work to do. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Ying Huang <ying.huang@linux.intel.com> Tested-by: Ying Huang <ying.huang@linux.intel.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 09:50:34 +07:00
if (oldsize > holebegin)
unmap_mapping_range(inode->i_mapping,
holebegin, 0, 1);
/*
* Part of the huge page can be beyond i_size: subject
* to shrink under memory pressure.
*/
if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE)) {
spin_lock(&sbinfo->shrinklist_lock);
mm: fix list corruptions on shmem shrinklist We saw many list corruption warnings on shmem shrinklist: WARNING: CPU: 18 PID: 177 at lib/list_debug.c:59 __list_del_entry+0x9e/0xc0 list_del corruption. prev->next should be ffff9ae5694b82d8, but was ffff9ae5699ba960 Modules linked in: intel_rapl sb_edac edac_core x86_pkg_temp_thermal coretemp iTCO_wdt iTCO_vendor_support crct10dif_pclmul crc32_pclmul ghash_clmulni_intel raid0 dcdbas shpchp wmi hed i2c_i801 ioatdma lpc_ich i2c_smbus acpi_cpufreq tcp_diag inet_diag sch_fq_codel ipmi_si ipmi_devintf ipmi_msghandler igb ptp crc32c_intel pps_core i2c_algo_bit i2c_core dca ipv6 crc_ccitt CPU: 18 PID: 177 Comm: kswapd1 Not tainted 4.9.34-t3.el7.twitter.x86_64 #1 Hardware name: Dell Inc. PowerEdge C6220/0W6W6G, BIOS 2.2.3 11/07/2013 Call Trace: dump_stack+0x4d/0x66 __warn+0xcb/0xf0 warn_slowpath_fmt+0x4f/0x60 __list_del_entry+0x9e/0xc0 shmem_unused_huge_shrink+0xfa/0x2e0 shmem_unused_huge_scan+0x20/0x30 super_cache_scan+0x193/0x1a0 shrink_slab.part.41+0x1e3/0x3f0 shrink_slab+0x29/0x30 shrink_node+0xf9/0x2f0 kswapd+0x2d8/0x6c0 kthread+0xd7/0xf0 ret_from_fork+0x22/0x30 WARNING: CPU: 23 PID: 639 at lib/list_debug.c:33 __list_add+0x89/0xb0 list_add corruption. prev->next should be next (ffff9ae5699ba960), but was ffff9ae5694b82d8. (prev=ffff9ae5694b82d8). Modules linked in: intel_rapl sb_edac edac_core x86_pkg_temp_thermal coretemp iTCO_wdt iTCO_vendor_support crct10dif_pclmul crc32_pclmul ghash_clmulni_intel raid0 dcdbas shpchp wmi hed i2c_i801 ioatdma lpc_ich i2c_smbus acpi_cpufreq tcp_diag inet_diag sch_fq_codel ipmi_si ipmi_devintf ipmi_msghandler igb ptp crc32c_intel pps_core i2c_algo_bit i2c_core dca ipv6 crc_ccitt CPU: 23 PID: 639 Comm: systemd-udevd Tainted: G W 4.9.34-t3.el7.twitter.x86_64 #1 Hardware name: Dell Inc. PowerEdge C6220/0W6W6G, BIOS 2.2.3 11/07/2013 Call Trace: dump_stack+0x4d/0x66 __warn+0xcb/0xf0 warn_slowpath_fmt+0x4f/0x60 __list_add+0x89/0xb0 shmem_setattr+0x204/0x230 notify_change+0x2ef/0x440 do_truncate+0x5d/0x90 path_openat+0x331/0x1190 do_filp_open+0x7e/0xe0 do_sys_open+0x123/0x200 SyS_open+0x1e/0x20 do_syscall_64+0x61/0x170 entry_SYSCALL64_slow_path+0x25/0x25 The problem is that shmem_unused_huge_shrink() moves entries from the global sbinfo->shrinklist to its local lists and then releases the spinlock. However, a parallel shmem_setattr() could access one of these entries directly and add it back to the global shrinklist if it is removed, with the spinlock held. The logic itself looks solid since an entry could be either in a local list or the global list, otherwise it is removed from one of them by list_del_init(). So probably the race condition is that, one CPU is in the middle of INIT_LIST_HEAD() but the other CPU calls list_empty() which returns true too early then the following list_add_tail() sees a corrupted entry. list_empty_careful() is designed to fix this situation. [akpm@linux-foundation.org: add comments] Link: http://lkml.kernel.org/r/20170803054630.18775-1-xiyou.wangcong@gmail.com Fixes: 779750d20b93 ("shmem: split huge pages beyond i_size under memory pressure") Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-11 05:24:24 +07:00
/*
* _careful to defend against unlocked access to
* ->shrink_list in shmem_unused_huge_shrink()
*/
if (list_empty_careful(&info->shrinklist)) {
list_add_tail(&info->shrinklist,
&sbinfo->shrinklist);
sbinfo->shrinklist_len++;
}
spin_unlock(&sbinfo->shrinklist_lock);
}
tmpfs: take control of its truncate_range 2.6.35's new truncate convention gave tmpfs the opportunity to control its file truncation, no longer enforced from outside by vmtruncate(). We shall want to build upon that, to handle pagecache and swap together. Slightly redefine the ->truncate_range interface: let it now be called between the unmap_mapping_range()s, with the filesystem responsible for doing the truncate_inode_pages_range() from it - just as the filesystem is nowadays responsible for doing that from its ->setattr. Let's rename shmem_notify_change() to shmem_setattr(). Instead of calling the generic truncate_setsize(), bring that code in so we can call shmem_truncate_range() - which will later be updated to perform its own variant of truncate_inode_pages_range(). Remove the punch_hole unmap_mapping_range() from shmem_truncate_range(): now that the COW's unmap_mapping_range() comes after ->truncate_range, there is no need to call it a third time. Export shmem_truncate_range() and add it to the list in shmem_fs.h, so that i915_gem_object_truncate() can call it explicitly in future; get this patch in first, then update drm/i915 once this is available (until then, i915 will just be doing the truncate_inode_pages() twice). Though introduced five years ago, no other filesystem is implementing ->truncate_range, and its only other user is madvise(,,MADV_REMOVE): we expect to convert it to fallocate(,FALLOC_FL_PUNCH_HOLE,,) shortly, whereupon ->truncate_range can be removed from inode_operations - shmem_truncate_range() will help i915 across that transition too. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-28 06:18:03 +07:00
}
}
setattr_copy(inode, attr);
if (attr->ia_valid & ATTR_MODE)
error = posix_acl_chmod(inode, inode->i_mode);
return error;
}
static void shmem_evict_inode(struct inode *inode)
{
struct shmem_inode_info *info = SHMEM_I(inode);
struct shmem_sb_info *sbinfo = SHMEM_SB(inode->i_sb);
if (inode->i_mapping->a_ops == &shmem_aops) {
shmem_unacct_size(info->flags, inode->i_size);
inode->i_size = 0;
shmem_truncate_range(inode, 0, (loff_t)-1);
if (!list_empty(&info->shrinklist)) {
spin_lock(&sbinfo->shrinklist_lock);
if (!list_empty(&info->shrinklist)) {
list_del_init(&info->shrinklist);
sbinfo->shrinklist_len--;
}
spin_unlock(&sbinfo->shrinklist_lock);
}
mm: swapoff: shmem_unuse() stop eviction without igrab() The igrab() in shmem_unuse() looks good, but we forgot that it gives no protection against concurrent unmounting: a point made by Konstantin Khlebnikov eight years ago, and then fixed in 2.6.39 by 778dd893ae78 ("tmpfs: fix race between umount and swapoff"). The current 5.1-rc swapoff is liable to hit "VFS: Busy inodes after unmount of tmpfs. Self-destruct in 5 seconds. Have a nice day..." followed by GPF. Once again, give up on using igrab(); but don't go back to making such heavy-handed use of shmem_swaplist_mutex as last time: that would spoil the new design, and I expect could deadlock inside shmem_swapin_page(). Instead, shmem_unuse() just raise a "stop_eviction" count in the shmem- specific inode, and shmem_evict_inode() wait for that to go down to 0. Call it "stop_eviction" rather than "swapoff_busy" because it can be put to use for others later (huge tmpfs patches expect to use it). That simplifies shmem_unuse(), protecting it from both unlink and unmount; and in practice lets it locate all the swap in its first try. But do not rely on that: there's still a theoretical case, when shmem_writepage() might have been preempted after its get_swap_page(), before making the swap entry visible to swapoff. [hughd@google.com: remove incorrect list_del()] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1904091133570.1898@eggly.anvils Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1904081259400.1523@eggly.anvils Fixes: b56a2d8af914 ("mm: rid swapoff of quadratic complexity") Signed-off-by: Hugh Dickins <hughd@google.com> Cc: "Alex Xu (Hello71)" <alex_y_xu@yahoo.ca> Cc: Huang Ying <ying.huang@intel.com> Cc: Kelley Nielsen <kelleynnn@gmail.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Rik van Riel <riel@surriel.com> Cc: Vineeth Pillai <vpillai@digitalocean.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-19 07:50:13 +07:00
while (!list_empty(&info->swaplist)) {
/* Wait while shmem_unuse() is scanning this inode... */
wait_var_event(&info->stop_eviction,
!atomic_read(&info->stop_eviction));
mutex_lock(&shmem_swaplist_mutex);
mm: swapoff: shmem_unuse() stop eviction without igrab() The igrab() in shmem_unuse() looks good, but we forgot that it gives no protection against concurrent unmounting: a point made by Konstantin Khlebnikov eight years ago, and then fixed in 2.6.39 by 778dd893ae78 ("tmpfs: fix race between umount and swapoff"). The current 5.1-rc swapoff is liable to hit "VFS: Busy inodes after unmount of tmpfs. Self-destruct in 5 seconds. Have a nice day..." followed by GPF. Once again, give up on using igrab(); but don't go back to making such heavy-handed use of shmem_swaplist_mutex as last time: that would spoil the new design, and I expect could deadlock inside shmem_swapin_page(). Instead, shmem_unuse() just raise a "stop_eviction" count in the shmem- specific inode, and shmem_evict_inode() wait for that to go down to 0. Call it "stop_eviction" rather than "swapoff_busy" because it can be put to use for others later (huge tmpfs patches expect to use it). That simplifies shmem_unuse(), protecting it from both unlink and unmount; and in practice lets it locate all the swap in its first try. But do not rely on that: there's still a theoretical case, when shmem_writepage() might have been preempted after its get_swap_page(), before making the swap entry visible to swapoff. [hughd@google.com: remove incorrect list_del()] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1904091133570.1898@eggly.anvils Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1904081259400.1523@eggly.anvils Fixes: b56a2d8af914 ("mm: rid swapoff of quadratic complexity") Signed-off-by: Hugh Dickins <hughd@google.com> Cc: "Alex Xu (Hello71)" <alex_y_xu@yahoo.ca> Cc: Huang Ying <ying.huang@intel.com> Cc: Kelley Nielsen <kelleynnn@gmail.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Rik van Riel <riel@surriel.com> Cc: Vineeth Pillai <vpillai@digitalocean.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-19 07:50:13 +07:00
/* ...but beware of the race if we peeked too early */
if (!atomic_read(&info->stop_eviction))
list_del_init(&info->swaplist);
mutex_unlock(&shmem_swaplist_mutex);
}
}
tmpfs: implement generic xattr support Implement generic xattrs for tmpfs filesystems. The Feodra project, while trying to replace suid apps with file capabilities, realized that tmpfs, which is used on the build systems, does not support file capabilities and thus cannot be used to build packages which use file capabilities. Xattrs are also needed for overlayfs. The xattr interface is a bit odd. If a filesystem does not implement any {get,set,list}xattr functions the VFS will call into some random LSM hooks and the running LSM can then implement some method for handling xattrs. SELinux for example provides a method to support security.selinux but no other security.* xattrs. As it stands today when one enables CONFIG_TMPFS_POSIX_ACL tmpfs will have xattr handler routines specifically to handle acls. Because of this tmpfs would loose the VFS/LSM helpers to support the running LSM. To make up for that tmpfs had stub functions that did nothing but call into the LSM hooks which implement the helpers. This new patch does not use the LSM fallback functions and instead just implements a native get/set/list xattr feature for the full security.* and trusted.* namespace like a normal filesystem. This means that tmpfs can now support both security.selinux and security.capability, which was not previously possible. The basic implementation is that I attach a: struct shmem_xattr { struct list_head list; /* anchored by shmem_inode_info->xattr_list */ char *name; size_t size; char value[0]; }; Into the struct shmem_inode_info for each xattr that is set. This implementation could easily support the user.* namespace as well, except some care needs to be taken to prevent large amounts of unswappable memory being allocated for unprivileged users. [mszeredi@suse.cz: new config option, suport trusted.*, support symlinks] Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com> Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Hugh Dickins <hughd@google.com> Tested-by: Jordi Pujol <jordipujolp@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 07:12:39 +07:00
simple_xattrs_free(&info->xattrs);
WARN_ON(inode->i_blocks);
shmem_free_inode(inode->i_sb);
clear_inode(inode);
}
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:03 +07:00
extern struct swap_info_struct *swap_info[];
static int shmem_find_swap_entries(struct address_space *mapping,
pgoff_t start, unsigned int nr_entries,
struct page **entries, pgoff_t *indices,
unsigned int type, bool frontswap)
{
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:03 +07:00
XA_STATE(xas, &mapping->i_pages, start);
struct page *page;
swp_entry_t entry;
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:03 +07:00
unsigned int ret = 0;
if (!nr_entries)
return 0;
rcu_read_lock();
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:03 +07:00
xas_for_each(&xas, page, ULONG_MAX) {
if (xas_retry(&xas, page))
continue;
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:03 +07:00
if (!xa_is_value(page))
continue;
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:03 +07:00
entry = radix_to_swp_entry(page);
if (swp_type(entry) != type)
continue;
if (frontswap &&
!frontswap_test(swap_info[type], swp_offset(entry)))
continue;
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:03 +07:00
indices[ret] = xas.xa_index;
entries[ret] = page;
if (need_resched()) {
xas_pause(&xas);
cond_resched_rcu();
}
if (++ret == nr_entries)
break;
}
rcu_read_unlock();
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:03 +07:00
return ret;
}
/*
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:03 +07:00
* Move the swapped pages for an inode to page cache. Returns the count
* of pages swapped in, or the error in case of failure.
*/
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:03 +07:00
static int shmem_unuse_swap_entries(struct inode *inode, struct pagevec pvec,
pgoff_t *indices)
{
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:03 +07:00
int i = 0;
int ret = 0;
shmem: replace page if mapping excludes its zone The GMA500 GPU driver uses GEM shmem objects, but with a new twist: the backing RAM has to be below 4GB. Not a problem while the boards supported only 4GB: but now Intel's D2700MUD boards support 8GB, and their GMA3600 is managed by the GMA500 driver. shmem/tmpfs has never pretended to support hardware restrictions on the backing memory, but it might have appeared to do so before v3.1, and even now it works fine until a page is swapped out then back in. When read_cache_page_gfp() supplied a freshly allocated page for copy, that compensated for whatever choice might have been made by earlier swapin readahead; but swapoff was likely to destroy the illusion. We'd like to continue to support GMA500, so now add a new shmem_should_replace_page() check on the zone when about to move a page from swapcache to filecache (in swapin and swapoff cases), with shmem_replace_page() to allocate and substitute a suitable page (given gma500/gem.c's mapping_set_gfp_mask GFP_KERNEL | __GFP_DMA32). This does involve a minor extension to mem_cgroup_replace_page_cache() (the page may or may not have already been charged); and I've removed a comment and call to mem_cgroup_uncharge_cache_page(), which in fact is always a no-op while PageSwapCache. Also removed optimization of an unlikely path in shmem_getpage_gfp(), now that we need to check PageSwapCache more carefully (a racing caller might already have made the copy). And at one point shmem_unuse_inode() needs to use the hitherto private page_swapcount(), to guard against racing with inode eviction. It would make sense to extend shmem_should_replace_page(), to cover cpuset and NUMA mempolicy restrictions too, but set that aside for now: needs a cleanup of shmem mempolicy handling, and more testing, and ought to handle swap faults in do_swap_page() as well as shmem. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Stephane Marchesin <marcheu@chromium.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rob Clark <rob.clark@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:38 +07:00
int error = 0;
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:03 +07:00
struct address_space *mapping = inode->i_mapping;
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:03 +07:00
for (i = 0; i < pvec.nr; i++) {
struct page *page = pvec.pages[i];
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:03 +07:00
if (!xa_is_value(page))
continue;
error = shmem_swapin_page(inode, indices[i],
&page, SGP_CACHE,
mapping_gfp_mask(mapping),
NULL, NULL);
if (error == 0) {
unlock_page(page);
put_page(page);
ret++;
}
if (error == -ENOMEM)
break;
error = 0;
shmem: replace page if mapping excludes its zone The GMA500 GPU driver uses GEM shmem objects, but with a new twist: the backing RAM has to be below 4GB. Not a problem while the boards supported only 4GB: but now Intel's D2700MUD boards support 8GB, and their GMA3600 is managed by the GMA500 driver. shmem/tmpfs has never pretended to support hardware restrictions on the backing memory, but it might have appeared to do so before v3.1, and even now it works fine until a page is swapped out then back in. When read_cache_page_gfp() supplied a freshly allocated page for copy, that compensated for whatever choice might have been made by earlier swapin readahead; but swapoff was likely to destroy the illusion. We'd like to continue to support GMA500, so now add a new shmem_should_replace_page() check on the zone when about to move a page from swapcache to filecache (in swapin and swapoff cases), with shmem_replace_page() to allocate and substitute a suitable page (given gma500/gem.c's mapping_set_gfp_mask GFP_KERNEL | __GFP_DMA32). This does involve a minor extension to mem_cgroup_replace_page_cache() (the page may or may not have already been charged); and I've removed a comment and call to mem_cgroup_uncharge_cache_page(), which in fact is always a no-op while PageSwapCache. Also removed optimization of an unlikely path in shmem_getpage_gfp(), now that we need to check PageSwapCache more carefully (a racing caller might already have made the copy). And at one point shmem_unuse_inode() needs to use the hitherto private page_swapcount(), to guard against racing with inode eviction. It would make sense to extend shmem_should_replace_page(), to cover cpuset and NUMA mempolicy restrictions too, but set that aside for now: needs a cleanup of shmem mempolicy handling, and more testing, and ought to handle swap faults in do_swap_page() as well as shmem. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Stephane Marchesin <marcheu@chromium.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rob Clark <rob.clark@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:38 +07:00
}
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:03 +07:00
return error ? error : ret;
}
shmem: replace page if mapping excludes its zone The GMA500 GPU driver uses GEM shmem objects, but with a new twist: the backing RAM has to be below 4GB. Not a problem while the boards supported only 4GB: but now Intel's D2700MUD boards support 8GB, and their GMA3600 is managed by the GMA500 driver. shmem/tmpfs has never pretended to support hardware restrictions on the backing memory, but it might have appeared to do so before v3.1, and even now it works fine until a page is swapped out then back in. When read_cache_page_gfp() supplied a freshly allocated page for copy, that compensated for whatever choice might have been made by earlier swapin readahead; but swapoff was likely to destroy the illusion. We'd like to continue to support GMA500, so now add a new shmem_should_replace_page() check on the zone when about to move a page from swapcache to filecache (in swapin and swapoff cases), with shmem_replace_page() to allocate and substitute a suitable page (given gma500/gem.c's mapping_set_gfp_mask GFP_KERNEL | __GFP_DMA32). This does involve a minor extension to mem_cgroup_replace_page_cache() (the page may or may not have already been charged); and I've removed a comment and call to mem_cgroup_uncharge_cache_page(), which in fact is always a no-op while PageSwapCache. Also removed optimization of an unlikely path in shmem_getpage_gfp(), now that we need to check PageSwapCache more carefully (a racing caller might already have made the copy). And at one point shmem_unuse_inode() needs to use the hitherto private page_swapcount(), to guard against racing with inode eviction. It would make sense to extend shmem_should_replace_page(), to cover cpuset and NUMA mempolicy restrictions too, but set that aside for now: needs a cleanup of shmem mempolicy handling, and more testing, and ought to handle swap faults in do_swap_page() as well as shmem. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Stephane Marchesin <marcheu@chromium.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rob Clark <rob.clark@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:38 +07:00
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:03 +07:00
/*
* If swap found in inode, free it and move page from swapcache to filecache.
*/
static int shmem_unuse_inode(struct inode *inode, unsigned int type,
bool frontswap, unsigned long *fs_pages_to_unuse)
{
struct address_space *mapping = inode->i_mapping;
pgoff_t start = 0;
struct pagevec pvec;
pgoff_t indices[PAGEVEC_SIZE];
bool frontswap_partial = (frontswap && *fs_pages_to_unuse > 0);
int ret = 0;
pagevec_init(&pvec);
do {
unsigned int nr_entries = PAGEVEC_SIZE;
if (frontswap_partial && *fs_pages_to_unuse < PAGEVEC_SIZE)
nr_entries = *fs_pages_to_unuse;
pvec.nr = shmem_find_swap_entries(mapping, start, nr_entries,
pvec.pages, indices,
type, frontswap);
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:03 +07:00
if (pvec.nr == 0) {
ret = 0;
break;
}
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:03 +07:00
ret = shmem_unuse_swap_entries(inode, pvec, indices);
if (ret < 0)
break;
if (frontswap_partial) {
*fs_pages_to_unuse -= ret;
if (*fs_pages_to_unuse == 0) {
ret = FRONTSWAP_PAGES_UNUSED;
break;
}
}
start = indices[pvec.nr - 1];
} while (true);
return ret;
}
/*
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:03 +07:00
* Read all the shared memory data that resides in the swap
* device 'type' back into memory, so the swap device can be
* unused.
*/
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:03 +07:00
int shmem_unuse(unsigned int type, bool frontswap,
unsigned long *fs_pages_to_unuse)
{
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:03 +07:00
struct shmem_inode_info *info, *next;
shmem: replace page if mapping excludes its zone The GMA500 GPU driver uses GEM shmem objects, but with a new twist: the backing RAM has to be below 4GB. Not a problem while the boards supported only 4GB: but now Intel's D2700MUD boards support 8GB, and their GMA3600 is managed by the GMA500 driver. shmem/tmpfs has never pretended to support hardware restrictions on the backing memory, but it might have appeared to do so before v3.1, and even now it works fine until a page is swapped out then back in. When read_cache_page_gfp() supplied a freshly allocated page for copy, that compensated for whatever choice might have been made by earlier swapin readahead; but swapoff was likely to destroy the illusion. We'd like to continue to support GMA500, so now add a new shmem_should_replace_page() check on the zone when about to move a page from swapcache to filecache (in swapin and swapoff cases), with shmem_replace_page() to allocate and substitute a suitable page (given gma500/gem.c's mapping_set_gfp_mask GFP_KERNEL | __GFP_DMA32). This does involve a minor extension to mem_cgroup_replace_page_cache() (the page may or may not have already been charged); and I've removed a comment and call to mem_cgroup_uncharge_cache_page(), which in fact is always a no-op while PageSwapCache. Also removed optimization of an unlikely path in shmem_getpage_gfp(), now that we need to check PageSwapCache more carefully (a racing caller might already have made the copy). And at one point shmem_unuse_inode() needs to use the hitherto private page_swapcount(), to guard against racing with inode eviction. It would make sense to extend shmem_should_replace_page(), to cover cpuset and NUMA mempolicy restrictions too, but set that aside for now: needs a cleanup of shmem mempolicy handling, and more testing, and ought to handle swap faults in do_swap_page() as well as shmem. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Stephane Marchesin <marcheu@chromium.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rob Clark <rob.clark@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:38 +07:00
int error = 0;
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:03 +07:00
if (list_empty(&shmem_swaplist))
return 0;
mutex_lock(&shmem_swaplist_mutex);
list_for_each_entry_safe(info, next, &shmem_swaplist, swaplist) {
if (!info->swapped) {
list_del_init(&info->swaplist);
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:03 +07:00
continue;
}
mm: swapoff: shmem_unuse() stop eviction without igrab() The igrab() in shmem_unuse() looks good, but we forgot that it gives no protection against concurrent unmounting: a point made by Konstantin Khlebnikov eight years ago, and then fixed in 2.6.39 by 778dd893ae78 ("tmpfs: fix race between umount and swapoff"). The current 5.1-rc swapoff is liable to hit "VFS: Busy inodes after unmount of tmpfs. Self-destruct in 5 seconds. Have a nice day..." followed by GPF. Once again, give up on using igrab(); but don't go back to making such heavy-handed use of shmem_swaplist_mutex as last time: that would spoil the new design, and I expect could deadlock inside shmem_swapin_page(). Instead, shmem_unuse() just raise a "stop_eviction" count in the shmem- specific inode, and shmem_evict_inode() wait for that to go down to 0. Call it "stop_eviction" rather than "swapoff_busy" because it can be put to use for others later (huge tmpfs patches expect to use it). That simplifies shmem_unuse(), protecting it from both unlink and unmount; and in practice lets it locate all the swap in its first try. But do not rely on that: there's still a theoretical case, when shmem_writepage() might have been preempted after its get_swap_page(), before making the swap entry visible to swapoff. [hughd@google.com: remove incorrect list_del()] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1904091133570.1898@eggly.anvils Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1904081259400.1523@eggly.anvils Fixes: b56a2d8af914 ("mm: rid swapoff of quadratic complexity") Signed-off-by: Hugh Dickins <hughd@google.com> Cc: "Alex Xu (Hello71)" <alex_y_xu@yahoo.ca> Cc: Huang Ying <ying.huang@intel.com> Cc: Kelley Nielsen <kelleynnn@gmail.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Rik van Riel <riel@surriel.com> Cc: Vineeth Pillai <vpillai@digitalocean.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-19 07:50:13 +07:00
/*
* Drop the swaplist mutex while searching the inode for swap;
* but before doing so, make sure shmem_evict_inode() will not
* remove placeholder inode from swaplist, nor let it be freed
* (igrab() would protect from unlink, but not from unmount).
*/
atomic_inc(&info->stop_eviction);
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:03 +07:00
mutex_unlock(&shmem_swaplist_mutex);
mm: swapoff: shmem_unuse() stop eviction without igrab() The igrab() in shmem_unuse() looks good, but we forgot that it gives no protection against concurrent unmounting: a point made by Konstantin Khlebnikov eight years ago, and then fixed in 2.6.39 by 778dd893ae78 ("tmpfs: fix race between umount and swapoff"). The current 5.1-rc swapoff is liable to hit "VFS: Busy inodes after unmount of tmpfs. Self-destruct in 5 seconds. Have a nice day..." followed by GPF. Once again, give up on using igrab(); but don't go back to making such heavy-handed use of shmem_swaplist_mutex as last time: that would spoil the new design, and I expect could deadlock inside shmem_swapin_page(). Instead, shmem_unuse() just raise a "stop_eviction" count in the shmem- specific inode, and shmem_evict_inode() wait for that to go down to 0. Call it "stop_eviction" rather than "swapoff_busy" because it can be put to use for others later (huge tmpfs patches expect to use it). That simplifies shmem_unuse(), protecting it from both unlink and unmount; and in practice lets it locate all the swap in its first try. But do not rely on that: there's still a theoretical case, when shmem_writepage() might have been preempted after its get_swap_page(), before making the swap entry visible to swapoff. [hughd@google.com: remove incorrect list_del()] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1904091133570.1898@eggly.anvils Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1904081259400.1523@eggly.anvils Fixes: b56a2d8af914 ("mm: rid swapoff of quadratic complexity") Signed-off-by: Hugh Dickins <hughd@google.com> Cc: "Alex Xu (Hello71)" <alex_y_xu@yahoo.ca> Cc: Huang Ying <ying.huang@intel.com> Cc: Kelley Nielsen <kelleynnn@gmail.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Rik van Riel <riel@surriel.com> Cc: Vineeth Pillai <vpillai@digitalocean.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-19 07:50:13 +07:00
error = shmem_unuse_inode(&info->vfs_inode, type, frontswap,
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:03 +07:00
fs_pages_to_unuse);
cond_resched();
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:03 +07:00
mutex_lock(&shmem_swaplist_mutex);
next = list_next_entry(info, swaplist);
if (!info->swapped)
list_del_init(&info->swaplist);
mm: swapoff: shmem_unuse() stop eviction without igrab() The igrab() in shmem_unuse() looks good, but we forgot that it gives no protection against concurrent unmounting: a point made by Konstantin Khlebnikov eight years ago, and then fixed in 2.6.39 by 778dd893ae78 ("tmpfs: fix race between umount and swapoff"). The current 5.1-rc swapoff is liable to hit "VFS: Busy inodes after unmount of tmpfs. Self-destruct in 5 seconds. Have a nice day..." followed by GPF. Once again, give up on using igrab(); but don't go back to making such heavy-handed use of shmem_swaplist_mutex as last time: that would spoil the new design, and I expect could deadlock inside shmem_swapin_page(). Instead, shmem_unuse() just raise a "stop_eviction" count in the shmem- specific inode, and shmem_evict_inode() wait for that to go down to 0. Call it "stop_eviction" rather than "swapoff_busy" because it can be put to use for others later (huge tmpfs patches expect to use it). That simplifies shmem_unuse(), protecting it from both unlink and unmount; and in practice lets it locate all the swap in its first try. But do not rely on that: there's still a theoretical case, when shmem_writepage() might have been preempted after its get_swap_page(), before making the swap entry visible to swapoff. [hughd@google.com: remove incorrect list_del()] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1904091133570.1898@eggly.anvils Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1904081259400.1523@eggly.anvils Fixes: b56a2d8af914 ("mm: rid swapoff of quadratic complexity") Signed-off-by: Hugh Dickins <hughd@google.com> Cc: "Alex Xu (Hello71)" <alex_y_xu@yahoo.ca> Cc: Huang Ying <ying.huang@intel.com> Cc: Kelley Nielsen <kelleynnn@gmail.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Rik van Riel <riel@surriel.com> Cc: Vineeth Pillai <vpillai@digitalocean.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-19 07:50:13 +07:00
if (atomic_dec_and_test(&info->stop_eviction))
wake_up_var(&info->stop_eviction);
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:03 +07:00
if (error)
break;
}
mutex_unlock(&shmem_swaplist_mutex);
return error;
}
/*
* Move the page from the page cache to the swap cache.
*/
static int shmem_writepage(struct page *page, struct writeback_control *wbc)
{
struct shmem_inode_info *info;
struct address_space *mapping;
struct inode *inode;
swp_entry_t swap;
pgoff_t index;
VM_BUG_ON_PAGE(PageCompound(page), page);
BUG_ON(!PageLocked(page));
mapping = page->mapping;
index = page->index;
inode = mapping->host;
info = SHMEM_I(inode);
if (info->flags & VM_LOCKED)
goto redirty;
if (!total_swap_pages)
goto redirty;
/*
* Our capabilities prevent regular writeback or sync from ever calling
* shmem_writepage; but a stacking filesystem might use ->writepage of
* its underlying filesystem, in which case tmpfs should write out to
* swap only in response to memory pressure, and not for the writeback
* threads or sync.
*/
if (!wbc->for_reclaim) {
WARN_ON_ONCE(1); /* Still happens? Tell us about it! */
goto redirty;
}
/*
* This is somewhat ridiculous, but without plumbing a SWAP_MAP_FALLOC
* value into swapfile.c, the only way we can correctly account for a
* fallocated page arriving here is now to initialize it and write it.
tmpfs: quit when fallocate fills memory As it stands, a large fallocate() on tmpfs is liable to fill memory with pages, freed on failure except when they run into swap, at which point they become fixed into the file despite the failure. That feels quite wrong, to be consuming resources precisely when they're in short supply. Go the other way instead: shmem_fallocate() indicate the range it has fallocated to shmem_writepage(), keeping count of pages it's allocating; shmem_writepage() reactivate instead of swapping out pages fallocated by this syscall (but happily swap out those from earlier occasions), keeping count; shmem_fallocate() compare counts and give up once the reactivated pages have started to coming back to writepage (approximately: some zones would in fact recycle faster than others). This is a little unusual, but works well: although we could consider the failure to swap as a bug, and fix it later with SWAP_MAP_FALLOC handling added in swapfile.c and memcontrol.c, I doubt that we shall ever want to. (If there's no swap, an over-large fallocate() on tmpfs is limited in the same way as writing: stopped by rlimit, or by tmpfs mount size if that was set sensibly, or by __vm_enough_memory() heuristics if OVERCOMMIT_GUESS or OVERCOMMIT_NEVER. If OVERCOMMIT_ALWAYS, then it is liable to OOM-kill others as writing would, but stops and frees if interrupted.) Now that everything is freed on failure, we can then skip updating ctime. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Cong Wang <amwang@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:42 +07:00
*
* That's okay for a page already fallocated earlier, but if we have
* not yet completed the fallocation, then (a) we want to keep track
* of this page in case we have to undo it, and (b) it may not be a
* good idea to continue anyway, once we're pushing into swap. So
* reactivate the page, and let shmem_fallocate() quit when too many.
*/
if (!PageUptodate(page)) {
tmpfs: quit when fallocate fills memory As it stands, a large fallocate() on tmpfs is liable to fill memory with pages, freed on failure except when they run into swap, at which point they become fixed into the file despite the failure. That feels quite wrong, to be consuming resources precisely when they're in short supply. Go the other way instead: shmem_fallocate() indicate the range it has fallocated to shmem_writepage(), keeping count of pages it's allocating; shmem_writepage() reactivate instead of swapping out pages fallocated by this syscall (but happily swap out those from earlier occasions), keeping count; shmem_fallocate() compare counts and give up once the reactivated pages have started to coming back to writepage (approximately: some zones would in fact recycle faster than others). This is a little unusual, but works well: although we could consider the failure to swap as a bug, and fix it later with SWAP_MAP_FALLOC handling added in swapfile.c and memcontrol.c, I doubt that we shall ever want to. (If there's no swap, an over-large fallocate() on tmpfs is limited in the same way as writing: stopped by rlimit, or by tmpfs mount size if that was set sensibly, or by __vm_enough_memory() heuristics if OVERCOMMIT_GUESS or OVERCOMMIT_NEVER. If OVERCOMMIT_ALWAYS, then it is liable to OOM-kill others as writing would, but stops and frees if interrupted.) Now that everything is freed on failure, we can then skip updating ctime. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Cong Wang <amwang@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:42 +07:00
if (inode->i_private) {
struct shmem_falloc *shmem_falloc;
spin_lock(&inode->i_lock);
shmem_falloc = inode->i_private;
if (shmem_falloc &&
shmem: fix faulting into a hole, not taking i_mutex Commit f00cdc6df7d7 ("shmem: fix faulting into a hole while it's punched") was buggy: Sasha sent a lockdep report to remind us that grabbing i_mutex in the fault path is a no-no (write syscall may already hold i_mutex while faulting user buffer). We tried a completely different approach (see following patch) but that proved inadequate: good enough for a rational workload, but not good enough against trinity - which forks off so many mappings of the object that contention on i_mmap_mutex while hole-puncher holds i_mutex builds into serious starvation when concurrent faults force the puncher to fall back to single-page unmap_mapping_range() searches of the i_mmap tree. So return to the original umbrella approach, but keep away from i_mutex this time. We really don't want to bloat every shmem inode with a new mutex or completion, just to protect this unlikely case from trinity. So extend the original with wait_queue_head on stack at the hole-punch end, and wait_queue item on the stack at the fault end. This involves further use of i_lock to guard against the races: lockdep has been happy so far, and I see fs/inode.c:unlock_new_inode() holds i_lock around wake_up_bit(), which is comparable to what we do here. i_lock is more convenient, but we could switch to shmem's info->lock. This issue has been tagged with CVE-2014-4171, which will require commit f00cdc6df7d7 and this and the following patch to be backported: we suggest to 3.1+, though in fact the trinity forkbomb effect might go back as far as 2.6.16, when madvise(,,MADV_REMOVE) came in - or might not, since much has changed, with i_mmap_mutex a spinlock before 3.0. Anyone running trinity on 3.0 and earlier? I don't think we need care. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lukas Czerner <lczerner@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: <stable@vger.kernel.org> [3.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-24 04:00:10 +07:00
!shmem_falloc->waitq &&
tmpfs: quit when fallocate fills memory As it stands, a large fallocate() on tmpfs is liable to fill memory with pages, freed on failure except when they run into swap, at which point they become fixed into the file despite the failure. That feels quite wrong, to be consuming resources precisely when they're in short supply. Go the other way instead: shmem_fallocate() indicate the range it has fallocated to shmem_writepage(), keeping count of pages it's allocating; shmem_writepage() reactivate instead of swapping out pages fallocated by this syscall (but happily swap out those from earlier occasions), keeping count; shmem_fallocate() compare counts and give up once the reactivated pages have started to coming back to writepage (approximately: some zones would in fact recycle faster than others). This is a little unusual, but works well: although we could consider the failure to swap as a bug, and fix it later with SWAP_MAP_FALLOC handling added in swapfile.c and memcontrol.c, I doubt that we shall ever want to. (If there's no swap, an over-large fallocate() on tmpfs is limited in the same way as writing: stopped by rlimit, or by tmpfs mount size if that was set sensibly, or by __vm_enough_memory() heuristics if OVERCOMMIT_GUESS or OVERCOMMIT_NEVER. If OVERCOMMIT_ALWAYS, then it is liable to OOM-kill others as writing would, but stops and frees if interrupted.) Now that everything is freed on failure, we can then skip updating ctime. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Cong Wang <amwang@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:42 +07:00
index >= shmem_falloc->start &&
index < shmem_falloc->next)
shmem_falloc->nr_unswapped++;
else
shmem_falloc = NULL;
spin_unlock(&inode->i_lock);
if (shmem_falloc)
goto redirty;
}
clear_highpage(page);
flush_dcache_page(page);
SetPageUptodate(page);
}
mm, THP, swap: delay splitting THP during swap out Patch series "THP swap: Delay splitting THP during swapping out", v11. This patchset is to optimize the performance of Transparent Huge Page (THP) swap. Recently, the performance of the storage devices improved so fast that we cannot saturate the disk bandwidth with single logical CPU when do page swap out even on a high-end server machine. Because the performance of the storage device improved faster than that of single logical CPU. And it seems that the trend will not change in the near future. On the other hand, the THP becomes more and more popular because of increased memory size. So it becomes necessary to optimize THP swap performance. The advantages of the THP swap support include: - Batch the swap operations for the THP to reduce lock acquiring/releasing, including allocating/freeing the swap space, adding/deleting to/from the swap cache, and writing/reading the swap space, etc. This will help improve the performance of the THP swap. - The THP swap space read/write will be 2M sequential IO. It is particularly helpful for the swap read, which are usually 4k random IO. This will improve the performance of the THP swap too. - It will help the memory fragmentation, especially when the THP is heavily used by the applications. The 2M continuous pages will be free up after THP swapping out. - It will improve the THP utilization on the system with the swap turned on. Because the speed for khugepaged to collapse the normal pages into the THP is quite slow. After the THP is split during the swapping out, it will take quite long time for the normal pages to collapse back into the THP after being swapped in. The high THP utilization helps the efficiency of the page based memory management too. There are some concerns regarding THP swap in, mainly because possible enlarged read/write IO size (for swap in/out) may put more overhead on the storage device. To deal with that, the THP swap in should be turned on only when necessary. For example, it can be selected via "always/never/madvise" logic, to be turned on globally, turned off globally, or turned on only for VMA with MADV_HUGEPAGE, etc. This patchset is the first step for the THP swap support. The plan is to delay splitting THP step by step, finally avoid splitting THP during the THP swapping out and swap out/in the THP as a whole. As the first step, in this patchset, the splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP and adding the THP into the swap cache. This will reduce lock acquiring/releasing for the locks used for the swap cache management. With the patchset, the swap out throughput improves 15.5% (from about 3.73GB/s to about 4.31GB/s) in the vm-scalability swap-w-seq test case with 8 processes. The test is done on a Xeon E5 v3 system. The swap device used is a RAM simulated PMEM (persistent memory) device. To test the sequential swapping out, the test case creates 8 processes, which sequentially allocate and write to the anonymous pages until the RAM and part of the swap device is used up. This patch (of 5): In this patch, splitting huge page is delayed from almost the first step of swapping out to after allocating the swap space for the THP (Transparent Huge Page) and adding the THP into the swap cache. This will batch the corresponding operation, thus improve THP swap out throughput. This is the first step for the THP swap optimization. The plan is to delay splitting the THP step by step and avoid splitting the THP finally. In this patch, one swap cluster is used to hold the contents of each THP swapped out. So, the size of the swap cluster is changed to that of the THP (Transparent Huge Page) on x86_64 architecture (512). For other architectures which want such THP swap optimization, ARCH_USES_THP_SWAP_CLUSTER needs to be selected in the Kconfig file for the architecture. In effect, this will enlarge swap cluster size by 2 times on x86_64. Which may make it harder to find a free cluster when the swap space becomes fragmented. So that, this may reduce the continuous swap space allocation and sequential write in theory. The performance test in 0day shows no regressions caused by this. In the future of THP swap optimization, some information of the swapped out THP (such as compound map count) will be recorded in the swap_cluster_info data structure. The mem cgroup swap accounting functions are enhanced to support charge or uncharge a swap cluster backing a THP as a whole. The swap cluster allocate/free functions are added to allocate/free a swap cluster for a THP. A fair simple algorithm is used for swap cluster allocation, that is, only the first swap device in priority list will be tried to allocate the swap cluster. The function will fail if the trying is not successful, and the caller will fallback to allocate a single swap slot instead. This works good enough for normal cases. If the difference of the number of the free swap clusters among multiple swap devices is significant, it is possible that some THPs are split earlier than necessary. For example, this could be caused by big size difference among multiple swap devices. The swap cache functions is enhanced to support add/delete THP to/from the swap cache as a set of (HPAGE_PMD_NR) sub-pages. This may be enhanced in the future with multi-order radix tree. But because we will split the THP soon during swapping out, that optimization doesn't make much sense for this first step. The THP splitting functions are enhanced to support to split THP in swap cache during swapping out. The page lock will be held during allocating the swap cluster, adding the THP into the swap cache and splitting the THP. So in the code path other than swapping out, if the THP need to be split, the PageSwapCache(THP) will be always false. The swap cluster is only available for SSD, so the THP swap optimization in this patchset has no effect for HDD. [ying.huang@intel.com: fix two issues in THP optimize patch] Link: http://lkml.kernel.org/r/87k25ed8zo.fsf@yhuang-dev.intel.com [hannes@cmpxchg.org: extensive cleanups and simplifications, reduce code size] Link: http://lkml.kernel.org/r/20170515112522.32457-2-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Andrew Morton <akpm@linux-foundation.org> [for config option] Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [for changes in huge_memory.c and huge_mm.h] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-07 05:37:18 +07:00
swap = get_swap_page(page);
if (!swap.val)
goto redirty;
tmpfs: fix race between umount and writepage Konstanin Khlebnikov reports that a dangerous race between umount and shmem_writepage can be reproduced by this script: for i in {1..300} ; do mkdir $i while true ; do mount -t tmpfs none $i dd if=/dev/zero of=$i/test bs=1M count=$(($RANDOM % 100)) umount $i done & done on a 6xCPU node with 8Gb RAM: kernel very unstable after this accident. =) Kernel log: VFS: Busy inodes after unmount of tmpfs. Self-destruct in 5 seconds. Have a nice day... WARNING: at lib/list_debug.c:53 __list_del_entry+0x8d/0x98() list_del corruption. prev->next should be ffff880222fdaac8, but was (null) Pid: 11222, comm: mount.tmpfs Not tainted 2.6.39-rc2+ #4 Call Trace: warn_slowpath_common+0x80/0x98 warn_slowpath_fmt+0x41/0x43 __list_del_entry+0x8d/0x98 evict+0x50/0x113 iput+0x138/0x141 ... BUG: unable to handle kernel paging request at ffffffffffffffff IP: shmem_free_blocks+0x18/0x4c Pid: 10422, comm: dd Tainted: G W 2.6.39-rc2+ #4 Call Trace: shmem_recalc_inode+0x61/0x66 shmem_writepage+0xba/0x1dc pageout+0x13c/0x24c shrink_page_list+0x28e/0x4be shrink_inactive_list+0x21f/0x382 ... shmem_writepage() calls igrab() on the inode for the page which came from page reclaim, to add it later into shmem_swaplist for swapoff operation. This igrab() can race with super-block deactivating process: shrink_inactive_list() deactivate_super() pageout() tmpfs_fs_type->kill_sb() shmem_writepage() kill_litter_super() generic_shutdown_super() evict_inodes() igrab() atomic_read(&inode->i_count) skip-inode iput() if (!list_empty(&sb->s_inodes)) printk("VFS: Busy inodes after... This igrap-iput pair was added in commit 1b1b32f2c6f6 "tmpfs: fix shmem_swaplist races" based on incorrect assumptions: igrab() protects the inode from concurrent eviction by deletion, but it does nothing to protect it from concurrent unmounting, which goes ahead despite the raised i_count. So this use of igrab() was wrong all along, but the race made much worse in 2.6.37 when commit 63997e98a3be "split invalidate_inodes()" replaced two attempts at invalidate_inodes() by a single evict_inodes(). Konstantin posted a plausible patch, raising sb->s_active too: I'm unsure whether it was correct or not; but burnt once by igrab(), I am sure that we don't want to rely more deeply upon externals here. Fix it by adding the inode to shmem_swaplist earlier, while the page lock on page in page cache still secures the inode against eviction, without artifically raising i_count. It was originally added later because shmem_unuse_inode() is liable to remove an inode from the list while it's unswapped; but we can guard against that by taking spinlock before dropping mutex. Reported-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Hugh Dickins <hughd@google.com> Tested-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-12 05:13:36 +07:00
/*
* Add inode to shmem_unuse()'s list of swapped-out inodes,
* if it's not already there. Do it now before the page is
* moved to swap cache, when its pagelock no longer protects
tmpfs: fix race between umount and writepage Konstanin Khlebnikov reports that a dangerous race between umount and shmem_writepage can be reproduced by this script: for i in {1..300} ; do mkdir $i while true ; do mount -t tmpfs none $i dd if=/dev/zero of=$i/test bs=1M count=$(($RANDOM % 100)) umount $i done & done on a 6xCPU node with 8Gb RAM: kernel very unstable after this accident. =) Kernel log: VFS: Busy inodes after unmount of tmpfs. Self-destruct in 5 seconds. Have a nice day... WARNING: at lib/list_debug.c:53 __list_del_entry+0x8d/0x98() list_del corruption. prev->next should be ffff880222fdaac8, but was (null) Pid: 11222, comm: mount.tmpfs Not tainted 2.6.39-rc2+ #4 Call Trace: warn_slowpath_common+0x80/0x98 warn_slowpath_fmt+0x41/0x43 __list_del_entry+0x8d/0x98 evict+0x50/0x113 iput+0x138/0x141 ... BUG: unable to handle kernel paging request at ffffffffffffffff IP: shmem_free_blocks+0x18/0x4c Pid: 10422, comm: dd Tainted: G W 2.6.39-rc2+ #4 Call Trace: shmem_recalc_inode+0x61/0x66 shmem_writepage+0xba/0x1dc pageout+0x13c/0x24c shrink_page_list+0x28e/0x4be shrink_inactive_list+0x21f/0x382 ... shmem_writepage() calls igrab() on the inode for the page which came from page reclaim, to add it later into shmem_swaplist for swapoff operation. This igrab() can race with super-block deactivating process: shrink_inactive_list() deactivate_super() pageout() tmpfs_fs_type->kill_sb() shmem_writepage() kill_litter_super() generic_shutdown_super() evict_inodes() igrab() atomic_read(&inode->i_count) skip-inode iput() if (!list_empty(&sb->s_inodes)) printk("VFS: Busy inodes after... This igrap-iput pair was added in commit 1b1b32f2c6f6 "tmpfs: fix shmem_swaplist races" based on incorrect assumptions: igrab() protects the inode from concurrent eviction by deletion, but it does nothing to protect it from concurrent unmounting, which goes ahead despite the raised i_count. So this use of igrab() was wrong all along, but the race made much worse in 2.6.37 when commit 63997e98a3be "split invalidate_inodes()" replaced two attempts at invalidate_inodes() by a single evict_inodes(). Konstantin posted a plausible patch, raising sb->s_active too: I'm unsure whether it was correct or not; but burnt once by igrab(), I am sure that we don't want to rely more deeply upon externals here. Fix it by adding the inode to shmem_swaplist earlier, while the page lock on page in page cache still secures the inode against eviction, without artifically raising i_count. It was originally added later because shmem_unuse_inode() is liable to remove an inode from the list while it's unswapped; but we can guard against that by taking spinlock before dropping mutex. Reported-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Hugh Dickins <hughd@google.com> Tested-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-12 05:13:36 +07:00
* the inode from eviction. But don't unlock the mutex until
* we've incremented swapped, because shmem_unuse_inode() will
* prune a !swapped inode from the swaplist under this mutex.
tmpfs: fix race between umount and writepage Konstanin Khlebnikov reports that a dangerous race between umount and shmem_writepage can be reproduced by this script: for i in {1..300} ; do mkdir $i while true ; do mount -t tmpfs none $i dd if=/dev/zero of=$i/test bs=1M count=$(($RANDOM % 100)) umount $i done & done on a 6xCPU node with 8Gb RAM: kernel very unstable after this accident. =) Kernel log: VFS: Busy inodes after unmount of tmpfs. Self-destruct in 5 seconds. Have a nice day... WARNING: at lib/list_debug.c:53 __list_del_entry+0x8d/0x98() list_del corruption. prev->next should be ffff880222fdaac8, but was (null) Pid: 11222, comm: mount.tmpfs Not tainted 2.6.39-rc2+ #4 Call Trace: warn_slowpath_common+0x80/0x98 warn_slowpath_fmt+0x41/0x43 __list_del_entry+0x8d/0x98 evict+0x50/0x113 iput+0x138/0x141 ... BUG: unable to handle kernel paging request at ffffffffffffffff IP: shmem_free_blocks+0x18/0x4c Pid: 10422, comm: dd Tainted: G W 2.6.39-rc2+ #4 Call Trace: shmem_recalc_inode+0x61/0x66 shmem_writepage+0xba/0x1dc pageout+0x13c/0x24c shrink_page_list+0x28e/0x4be shrink_inactive_list+0x21f/0x382 ... shmem_writepage() calls igrab() on the inode for the page which came from page reclaim, to add it later into shmem_swaplist for swapoff operation. This igrab() can race with super-block deactivating process: shrink_inactive_list() deactivate_super() pageout() tmpfs_fs_type->kill_sb() shmem_writepage() kill_litter_super() generic_shutdown_super() evict_inodes() igrab() atomic_read(&inode->i_count) skip-inode iput() if (!list_empty(&sb->s_inodes)) printk("VFS: Busy inodes after... This igrap-iput pair was added in commit 1b1b32f2c6f6 "tmpfs: fix shmem_swaplist races" based on incorrect assumptions: igrab() protects the inode from concurrent eviction by deletion, but it does nothing to protect it from concurrent unmounting, which goes ahead despite the raised i_count. So this use of igrab() was wrong all along, but the race made much worse in 2.6.37 when commit 63997e98a3be "split invalidate_inodes()" replaced two attempts at invalidate_inodes() by a single evict_inodes(). Konstantin posted a plausible patch, raising sb->s_active too: I'm unsure whether it was correct or not; but burnt once by igrab(), I am sure that we don't want to rely more deeply upon externals here. Fix it by adding the inode to shmem_swaplist earlier, while the page lock on page in page cache still secures the inode against eviction, without artifically raising i_count. It was originally added later because shmem_unuse_inode() is liable to remove an inode from the list while it's unswapped; but we can guard against that by taking spinlock before dropping mutex. Reported-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Hugh Dickins <hughd@google.com> Tested-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-12 05:13:36 +07:00
*/
mutex_lock(&shmem_swaplist_mutex);
if (list_empty(&info->swaplist))
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:03 +07:00
list_add(&info->swaplist, &shmem_swaplist);
tmpfs: fix race between umount and writepage Konstanin Khlebnikov reports that a dangerous race between umount and shmem_writepage can be reproduced by this script: for i in {1..300} ; do mkdir $i while true ; do mount -t tmpfs none $i dd if=/dev/zero of=$i/test bs=1M count=$(($RANDOM % 100)) umount $i done & done on a 6xCPU node with 8Gb RAM: kernel very unstable after this accident. =) Kernel log: VFS: Busy inodes after unmount of tmpfs. Self-destruct in 5 seconds. Have a nice day... WARNING: at lib/list_debug.c:53 __list_del_entry+0x8d/0x98() list_del corruption. prev->next should be ffff880222fdaac8, but was (null) Pid: 11222, comm: mount.tmpfs Not tainted 2.6.39-rc2+ #4 Call Trace: warn_slowpath_common+0x80/0x98 warn_slowpath_fmt+0x41/0x43 __list_del_entry+0x8d/0x98 evict+0x50/0x113 iput+0x138/0x141 ... BUG: unable to handle kernel paging request at ffffffffffffffff IP: shmem_free_blocks+0x18/0x4c Pid: 10422, comm: dd Tainted: G W 2.6.39-rc2+ #4 Call Trace: shmem_recalc_inode+0x61/0x66 shmem_writepage+0xba/0x1dc pageout+0x13c/0x24c shrink_page_list+0x28e/0x4be shrink_inactive_list+0x21f/0x382 ... shmem_writepage() calls igrab() on the inode for the page which came from page reclaim, to add it later into shmem_swaplist for swapoff operation. This igrab() can race with super-block deactivating process: shrink_inactive_list() deactivate_super() pageout() tmpfs_fs_type->kill_sb() shmem_writepage() kill_litter_super() generic_shutdown_super() evict_inodes() igrab() atomic_read(&inode->i_count) skip-inode iput() if (!list_empty(&sb->s_inodes)) printk("VFS: Busy inodes after... This igrap-iput pair was added in commit 1b1b32f2c6f6 "tmpfs: fix shmem_swaplist races" based on incorrect assumptions: igrab() protects the inode from concurrent eviction by deletion, but it does nothing to protect it from concurrent unmounting, which goes ahead despite the raised i_count. So this use of igrab() was wrong all along, but the race made much worse in 2.6.37 when commit 63997e98a3be "split invalidate_inodes()" replaced two attempts at invalidate_inodes() by a single evict_inodes(). Konstantin posted a plausible patch, raising sb->s_active too: I'm unsure whether it was correct or not; but burnt once by igrab(), I am sure that we don't want to rely more deeply upon externals here. Fix it by adding the inode to shmem_swaplist earlier, while the page lock on page in page cache still secures the inode against eviction, without artifically raising i_count. It was originally added later because shmem_unuse_inode() is liable to remove an inode from the list while it's unswapped; but we can guard against that by taking spinlock before dropping mutex. Reported-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Hugh Dickins <hughd@google.com> Tested-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-12 05:13:36 +07:00
if (add_to_swap_cache(page, swap,
__GFP_HIGH | __GFP_NOMEMALLOC | __GFP_NOWARN,
NULL) == 0) {
spin_lock_irq(&info->lock);
shmem_recalc_inode(inode);
tmpfs: fix shmem_evict_inode() warnings on i_blocks Dmitry Vyukov provides a little program, autogenerated by syzkaller, which races a fault on a mapping of a sparse memfd object, against truncation of that object below the fault address: run repeatedly for a few minutes, it reliably generates shmem_evict_inode()'s WARN_ON(inode->i_blocks). (But there's nothing specific to memfd here, nor to the fstat which it happened to use to generate the fault: though that looked suspicious, since a shmem_recalc_inode() had been added there recently. The same problem can be reproduced with open+unlink in place of memfd_create, and with fstatfs in place of fstat.) v3.7 commit 0f3c42f522dc ("tmpfs: change final i_blocks BUG to WARNING") explains one cause of such a warning (a race with shmem_writepage to swap), and possible solutions; but we never took it further, and this syzkaller incident turns out to have a different cause. shmem_getpage_gfp()'s error recovery, when a freshly allocated page is then found to be beyond eof, looks plausible - decrementing the alloced count that was just before incremented - but in fact can go wrong, if a racing thread (the truncator, for example) gets its shmem_recalc_inode() in just after our delete_from_page_cache(). delete_from_page_cache() decrements nrpages, that shmem_recalc_inode() will balance the books by decrementing alloced itself, then our decrement of alloced take it one too low: leading to the WARNING when the object is finally evicted. Once the new page has been exposed in the page cache, shmem_getpage_gfp() must leave it to shmem_recalc_inode() itself to get the accounting right in all cases (and not fall through from "trunc:" to "decused:"). Adjust that error recovery block; and the reinitialization of info and sbinfo can be removed too. While we're here, fix shmem_writepage() to avoid the original issue: it will be safe against a racing shmem_recalc_inode(), if it merely increments swapped before the shmem_delete_from_page_cache() which decrements nrpages (but it must then do its own shmem_recalc_inode() before that, while still in balance, instead of after). (Aside: why do we shmem_recalc_inode() here in the swap path? Because its raison d'etre is to cope with clean sparse shmem pages being reclaimed behind our back: so here when swapping is a good place to look for that case.) But I've not now managed to reproduce this bug, even without the patch. I don't see why I didn't do that earlier: perhaps inhibited by the preference to eliminate shmem_recalc_inode() altogether. Driven by this incident, I do now have a patch to do so at last; but still want to sit on it for a bit, there's a couple of questions yet to be resolved. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-12 04:40:55 +07:00
info->swapped++;
spin_unlock_irq(&info->lock);
tmpfs: fix shmem_evict_inode() warnings on i_blocks Dmitry Vyukov provides a little program, autogenerated by syzkaller, which races a fault on a mapping of a sparse memfd object, against truncation of that object below the fault address: run repeatedly for a few minutes, it reliably generates shmem_evict_inode()'s WARN_ON(inode->i_blocks). (But there's nothing specific to memfd here, nor to the fstat which it happened to use to generate the fault: though that looked suspicious, since a shmem_recalc_inode() had been added there recently. The same problem can be reproduced with open+unlink in place of memfd_create, and with fstatfs in place of fstat.) v3.7 commit 0f3c42f522dc ("tmpfs: change final i_blocks BUG to WARNING") explains one cause of such a warning (a race with shmem_writepage to swap), and possible solutions; but we never took it further, and this syzkaller incident turns out to have a different cause. shmem_getpage_gfp()'s error recovery, when a freshly allocated page is then found to be beyond eof, looks plausible - decrementing the alloced count that was just before incremented - but in fact can go wrong, if a racing thread (the truncator, for example) gets its shmem_recalc_inode() in just after our delete_from_page_cache(). delete_from_page_cache() decrements nrpages, that shmem_recalc_inode() will balance the books by decrementing alloced itself, then our decrement of alloced take it one too low: leading to the WARNING when the object is finally evicted. Once the new page has been exposed in the page cache, shmem_getpage_gfp() must leave it to shmem_recalc_inode() itself to get the accounting right in all cases (and not fall through from "trunc:" to "decused:"). Adjust that error recovery block; and the reinitialization of info and sbinfo can be removed too. While we're here, fix shmem_writepage() to avoid the original issue: it will be safe against a racing shmem_recalc_inode(), if it merely increments swapped before the shmem_delete_from_page_cache() which decrements nrpages (but it must then do its own shmem_recalc_inode() before that, while still in balance, instead of after). (Aside: why do we shmem_recalc_inode() here in the swap path? Because its raison d'etre is to cope with clean sparse shmem pages being reclaimed behind our back: so here when swapping is a good place to look for that case.) But I've not now managed to reproduce this bug, even without the patch. I don't see why I didn't do that earlier: perhaps inhibited by the preference to eliminate shmem_recalc_inode() altogether. Driven by this incident, I do now have a patch to do so at last; but still want to sit on it for a bit, there's a couple of questions yet to be resolved. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-12 04:40:55 +07:00
swap_shmem_alloc(swap);
shmem_delete_from_page_cache(page, swp_to_radix_entry(swap));
mutex_unlock(&shmem_swaplist_mutex);
BUG_ON(page_mapped(page));
shmem: writepage directly to swap Synopsis: if shmem_writepage calls swap_writepage directly, most shmem swap loads benefit, and a catastrophic interaction between SLUB and some flash storage is avoided. shmem_writepage() has always been peculiar in making no attempt to write: it has just transferred a shmem page from file cache to swap cache, then let that page make its way around the LRU again before being written and freed. The idea was that people use tmpfs because they want those pages to stay in RAM; so although we give it an overflow to swap, we should resist writing too soon, giving those pages a second chance before they can be reclaimed. That was always questionable, and I've toyed with this patch for years; but never had a clear justification to depart from the original design. It became more questionable in 2.6.28, when the split LRU patches classed shmem and tmpfs pages as SwapBacked rather than as file_cache: that in itself gives them more resistance to reclaim than normal file pages. I prepared this patch for 2.6.29, but the merge window arrived before I'd completed gathering statistics to justify sending it in. Then while comparing SLQB against SLUB, running SLUB on a laptop I'd habitually used with SLAB, I found SLUB to run my tmpfs kbuild swapping tests five times slower than SLAB or SLQB - other machines slower too, but nowhere near so bad. Simpler "cp -a" swapping tests showed the same. slub_max_order=0 brings sanity to all, but heavy swapping is too far from normal to justify such a tuning. The crucial factor on that laptop turns out to be that I'm using an SD card for swap. What happens is this: By default, SLUB uses order-2 pages for shmem_inode_cache (and many other fs inodes), so creating tmpfs files under memory pressure brings lumpy reclaim into play. One subpage of the order is chosen from the bottom of the LRU as usual, then the other three picked out from their random positions on the LRUs. In a tmpfs load, many of these pages will be ones which already passed through shmem_writepage, so already have swap allocated. And though their offsets on swap were probably allocated sequentially, now that the pages are picked off at random, their swap offsets are scattered. But the flash storage on the SD card is very sensitive to having its writes merged: once swap is written at scattered offsets, performance falls apart. Rotating disk seeks increase too, but less disastrously. So: stop giving shmem/tmpfs pages a second pass around the LRU, write them out to swap as soon as their swap has been allocated. It's surely possible to devise an artificial load which runs faster the old way, one whose sizing is such that the tmpfs pages on their second pass are the ones that are wanted again, and other pages not. But I've not yet found such a load: on all machines, under the loads I've tried, immediate swap_writepage speeds up shmem swapping: especially when using the SLUB allocator (and more effectively than slub_max_order=0), but also with the others; and it also reduces the variance between runs. How much faster varies widely: a factor of five is rare, 5% is common. One load which might have suffered: imagine a swapping shmem load in a limited mem_cgroup on a machine with plenty of memory. Before 2.6.29 the swapcache was not charged, and such a load would have run quickest with the shmem swapcache never written to swap. But now swapcache is charged, so even this load benefits from shmem_writepage directly to swap. Apologies for the #ifndef CONFIG_SWAP swap_writepage() stub in swap.h: it's silly because that will never get called; but refactoring shmem.c sensibly according to CONFIG_SWAP will be a separate task. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 05:23:33 +07:00
swap_writepage(page, wbc);
return 0;
}
mutex_unlock(&shmem_swaplist_mutex);
put_swap_page(page, swap);
redirty:
set_page_dirty(page);
if (wbc->for_reclaim)
return AOP_WRITEPAGE_ACTIVATE; /* Return with page locked */
unlock_page(page);
return 0;
}
tmpfs: preliminary minor tidyups Make a few cleanups in mm/shmem.c, before going on to complicate it. shmem_alloc_page() will become more complicated: we can't afford to to have that complication duplicated between a CONFIG_NUMA version and a !CONFIG_NUMA version, so rearrange the #ifdef'ery there to yield a single shmem_swapin() and a single shmem_alloc_page(). Yes, it's a shame to inflict the horrid pseudo-vma on non-NUMA configurations, but eliminating it is a larger cleanup: I have an alloc_pages_mpol() patchset not yet ready - mpol handling is subtle and bug-prone, and changed yet again since my last version. Move __SetPageLocked, __SetPageSwapBacked from shmem_getpage_gfp() to shmem_alloc_page(): that SwapBacked flag will be useful in future, to help to distinguish different cases appropriately. And the SGP_DIRTY variant of SGP_CACHE is hard to understand and of little use (IIRC it dates back to when shmem_getpage() returned the page unlocked): kill it and do the necessary in shmem_file_read_iter(). But an arm64 build then complained that info may be uninitialized (where shmem_getpage_gfp() deletes a freshly alloced page beyond eof), and advancing to an "sgp <= SGP_CACHE" test jogged it back to reality. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Yang Shi <yang.shi@linaro.org> Cc: Ning Qu <quning@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 07:12:44 +07:00
#if defined(CONFIG_NUMA) && defined(CONFIG_TMPFS)
mempolicy: use struct mempolicy pointer in shmem_sb_info This patch replaces the mempolicy mode, mode_flags, and nodemask in the shmem_sb_info struct with a struct mempolicy pointer, initialized to NULL. This removes dependency on the details of mempolicy from shmem.c and hugetlbfs inode.c and simplifies the interfaces. mpol_parse_str() in mempolicy.c is changed to return, via a pointer to a pointer arg, a struct mempolicy pointer on success. For MPOL_DEFAULT, the returned pointer is NULL. Further, mpol_parse_str() now takes a 'no_context' argument that causes the input nodemask to be stored in the w.user_nodemask of the created mempolicy for use when the mempolicy is installed in a tmpfs inode shared policy tree. At that time, any cpuset contextualization is applied to the original input nodemask. This preserves the previous behavior where the input nodemask was stored in the superblock. We can think of the returned mempolicy as "context free". Because mpol_parse_str() is now calling mpol_new(), we can remove from mpol_to_str() the semantic checks that mpol_new() already performs. Add 'no_context' parameter to mpol_to_str() to specify that it should format the nodemask in w.user_nodemask for 'bind' and 'interleave' policies. Change mpol_shared_policy_init() to take a pointer to a "context free" struct mempolicy and to create a new, "contextualized" mempolicy using the mode, mode_flags and user_nodemask from the input mempolicy. Note: we know that the mempolicy passed to mpol_to_str() or mpol_shared_policy_init() from a tmpfs superblock is "context free". This is currently the only instance thereof. However, if we found more uses for this concept, and introduced any ambiguity as to whether a mempolicy was context free or not, we could add another internal mode flag to identify context free mempolicies. Then, we could remove the 'no_context' argument from mpol_to_str(). Added shmem_get_sbmpol() to return a reference counted superblock mempolicy, if one exists, to pass to mpol_shared_policy_init(). We must add the reference under the sb stat_lock to prevent races with replacement of the mpol by remount. This reference is removed in mpol_shared_policy_init(). [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: another build fix] [akpm@linux-foundation.org: yet another build fix] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 16:13:26 +07:00
static void shmem_show_mpol(struct seq_file *seq, struct mempolicy *mpol)
{
mempolicy: rework shmem mpol parsing and display mm/shmem.c currently contains functions to parse and display memory policy strings for the tmpfs 'mpol' mount option. Move this to mm/mempolicy.c with the rest of the mempolicy support. With subsequent patches, we'll be able to remove knowledge of the details [mode, flags, policy, ...] completely from shmem.c 1) replace shmem_parse_mpol() in mm/shmem.c with mpol_parse_str() in mm/mempolicy.c. Rework to use the policy_types[] array [used by mpol_to_str()] to look up mode by name. 2) use mpol_to_str() to format policy for shmem_show_mpol(). mpol_to_str() expects a pointer to a struct mempolicy, so temporarily construct one. This will be replaced with a reference to a struct mempolicy in the tmpfs superblock in a subsequent patch. NOTE 1: I changed mpol_to_str() to use a colon ':' rather than an equal sign '=' as the nodemask delimiter to match mpol_parse_str() and the tmpfs/shmem mpol mount option formatting that now uses mpol_to_str(). This is a user visible change to numa_maps, but then the addition of the mode flags already changed the display. It makes sense to me to have the mounts and numa_maps display the policy in the same format. However, if anyone objects strongly, I can pass the desired nodemask delimeter as an arg to mpol_to_str(). Note 2: Like show_numa_map(), I don't check the return code from mpol_to_str(). I do use a longer buffer than the one provided by show_numa_map(), which seems to have sufficed so far. Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 16:13:23 +07:00
char buffer[64];
mempolicy: use struct mempolicy pointer in shmem_sb_info This patch replaces the mempolicy mode, mode_flags, and nodemask in the shmem_sb_info struct with a struct mempolicy pointer, initialized to NULL. This removes dependency on the details of mempolicy from shmem.c and hugetlbfs inode.c and simplifies the interfaces. mpol_parse_str() in mempolicy.c is changed to return, via a pointer to a pointer arg, a struct mempolicy pointer on success. For MPOL_DEFAULT, the returned pointer is NULL. Further, mpol_parse_str() now takes a 'no_context' argument that causes the input nodemask to be stored in the w.user_nodemask of the created mempolicy for use when the mempolicy is installed in a tmpfs inode shared policy tree. At that time, any cpuset contextualization is applied to the original input nodemask. This preserves the previous behavior where the input nodemask was stored in the superblock. We can think of the returned mempolicy as "context free". Because mpol_parse_str() is now calling mpol_new(), we can remove from mpol_to_str() the semantic checks that mpol_new() already performs. Add 'no_context' parameter to mpol_to_str() to specify that it should format the nodemask in w.user_nodemask for 'bind' and 'interleave' policies. Change mpol_shared_policy_init() to take a pointer to a "context free" struct mempolicy and to create a new, "contextualized" mempolicy using the mode, mode_flags and user_nodemask from the input mempolicy. Note: we know that the mempolicy passed to mpol_to_str() or mpol_shared_policy_init() from a tmpfs superblock is "context free". This is currently the only instance thereof. However, if we found more uses for this concept, and introduced any ambiguity as to whether a mempolicy was context free or not, we could add another internal mode flag to identify context free mempolicies. Then, we could remove the 'no_context' argument from mpol_to_str(). Added shmem_get_sbmpol() to return a reference counted superblock mempolicy, if one exists, to pass to mpol_shared_policy_init(). We must add the reference under the sb stat_lock to prevent races with replacement of the mpol by remount. This reference is removed in mpol_shared_policy_init(). [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: another build fix] [akpm@linux-foundation.org: yet another build fix] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 16:13:26 +07:00
if (!mpol || mpol->mode == MPOL_DEFAULT)
mempolicy: rework shmem mpol parsing and display mm/shmem.c currently contains functions to parse and display memory policy strings for the tmpfs 'mpol' mount option. Move this to mm/mempolicy.c with the rest of the mempolicy support. With subsequent patches, we'll be able to remove knowledge of the details [mode, flags, policy, ...] completely from shmem.c 1) replace shmem_parse_mpol() in mm/shmem.c with mpol_parse_str() in mm/mempolicy.c. Rework to use the policy_types[] array [used by mpol_to_str()] to look up mode by name. 2) use mpol_to_str() to format policy for shmem_show_mpol(). mpol_to_str() expects a pointer to a struct mempolicy, so temporarily construct one. This will be replaced with a reference to a struct mempolicy in the tmpfs superblock in a subsequent patch. NOTE 1: I changed mpol_to_str() to use a colon ':' rather than an equal sign '=' as the nodemask delimiter to match mpol_parse_str() and the tmpfs/shmem mpol mount option formatting that now uses mpol_to_str(). This is a user visible change to numa_maps, but then the addition of the mode flags already changed the display. It makes sense to me to have the mounts and numa_maps display the policy in the same format. However, if anyone objects strongly, I can pass the desired nodemask delimeter as an arg to mpol_to_str(). Note 2: Like show_numa_map(), I don't check the return code from mpol_to_str(). I do use a longer buffer than the one provided by show_numa_map(), which seems to have sufficed so far. Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 16:13:23 +07:00
return; /* show nothing */
mpol_to_str(buffer, sizeof(buffer), mpol);
mempolicy: rework shmem mpol parsing and display mm/shmem.c currently contains functions to parse and display memory policy strings for the tmpfs 'mpol' mount option. Move this to mm/mempolicy.c with the rest of the mempolicy support. With subsequent patches, we'll be able to remove knowledge of the details [mode, flags, policy, ...] completely from shmem.c 1) replace shmem_parse_mpol() in mm/shmem.c with mpol_parse_str() in mm/mempolicy.c. Rework to use the policy_types[] array [used by mpol_to_str()] to look up mode by name. 2) use mpol_to_str() to format policy for shmem_show_mpol(). mpol_to_str() expects a pointer to a struct mempolicy, so temporarily construct one. This will be replaced with a reference to a struct mempolicy in the tmpfs superblock in a subsequent patch. NOTE 1: I changed mpol_to_str() to use a colon ':' rather than an equal sign '=' as the nodemask delimiter to match mpol_parse_str() and the tmpfs/shmem mpol mount option formatting that now uses mpol_to_str(). This is a user visible change to numa_maps, but then the addition of the mode flags already changed the display. It makes sense to me to have the mounts and numa_maps display the policy in the same format. However, if anyone objects strongly, I can pass the desired nodemask delimeter as an arg to mpol_to_str(). Note 2: Like show_numa_map(), I don't check the return code from mpol_to_str(). I do use a longer buffer than the one provided by show_numa_map(), which seems to have sufficed so far. Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 16:13:23 +07:00
seq_printf(seq, ",mpol=%s", buffer);
}
mempolicy: use struct mempolicy pointer in shmem_sb_info This patch replaces the mempolicy mode, mode_flags, and nodemask in the shmem_sb_info struct with a struct mempolicy pointer, initialized to NULL. This removes dependency on the details of mempolicy from shmem.c and hugetlbfs inode.c and simplifies the interfaces. mpol_parse_str() in mempolicy.c is changed to return, via a pointer to a pointer arg, a struct mempolicy pointer on success. For MPOL_DEFAULT, the returned pointer is NULL. Further, mpol_parse_str() now takes a 'no_context' argument that causes the input nodemask to be stored in the w.user_nodemask of the created mempolicy for use when the mempolicy is installed in a tmpfs inode shared policy tree. At that time, any cpuset contextualization is applied to the original input nodemask. This preserves the previous behavior where the input nodemask was stored in the superblock. We can think of the returned mempolicy as "context free". Because mpol_parse_str() is now calling mpol_new(), we can remove from mpol_to_str() the semantic checks that mpol_new() already performs. Add 'no_context' parameter to mpol_to_str() to specify that it should format the nodemask in w.user_nodemask for 'bind' and 'interleave' policies. Change mpol_shared_policy_init() to take a pointer to a "context free" struct mempolicy and to create a new, "contextualized" mempolicy using the mode, mode_flags and user_nodemask from the input mempolicy. Note: we know that the mempolicy passed to mpol_to_str() or mpol_shared_policy_init() from a tmpfs superblock is "context free". This is currently the only instance thereof. However, if we found more uses for this concept, and introduced any ambiguity as to whether a mempolicy was context free or not, we could add another internal mode flag to identify context free mempolicies. Then, we could remove the 'no_context' argument from mpol_to_str(). Added shmem_get_sbmpol() to return a reference counted superblock mempolicy, if one exists, to pass to mpol_shared_policy_init(). We must add the reference under the sb stat_lock to prevent races with replacement of the mpol by remount. This reference is removed in mpol_shared_policy_init(). [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: another build fix] [akpm@linux-foundation.org: yet another build fix] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 16:13:26 +07:00
static struct mempolicy *shmem_get_sbmpol(struct shmem_sb_info *sbinfo)
{
struct mempolicy *mpol = NULL;
if (sbinfo->mpol) {
spin_lock(&sbinfo->stat_lock); /* prevent replace/use races */
mpol = sbinfo->mpol;
mpol_get(mpol);
spin_unlock(&sbinfo->stat_lock);
}
return mpol;
}
tmpfs: preliminary minor tidyups Make a few cleanups in mm/shmem.c, before going on to complicate it. shmem_alloc_page() will become more complicated: we can't afford to to have that complication duplicated between a CONFIG_NUMA version and a !CONFIG_NUMA version, so rearrange the #ifdef'ery there to yield a single shmem_swapin() and a single shmem_alloc_page(). Yes, it's a shame to inflict the horrid pseudo-vma on non-NUMA configurations, but eliminating it is a larger cleanup: I have an alloc_pages_mpol() patchset not yet ready - mpol handling is subtle and bug-prone, and changed yet again since my last version. Move __SetPageLocked, __SetPageSwapBacked from shmem_getpage_gfp() to shmem_alloc_page(): that SwapBacked flag will be useful in future, to help to distinguish different cases appropriately. And the SGP_DIRTY variant of SGP_CACHE is hard to understand and of little use (IIRC it dates back to when shmem_getpage() returned the page unlocked): kill it and do the necessary in shmem_file_read_iter(). But an arm64 build then complained that info may be uninitialized (where shmem_getpage_gfp() deletes a freshly alloced page beyond eof), and advancing to an "sgp <= SGP_CACHE" test jogged it back to reality. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Yang Shi <yang.shi@linaro.org> Cc: Ning Qu <quning@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 07:12:44 +07:00
#else /* !CONFIG_NUMA || !CONFIG_TMPFS */
static inline void shmem_show_mpol(struct seq_file *seq, struct mempolicy *mpol)
{
}
static inline struct mempolicy *shmem_get_sbmpol(struct shmem_sb_info *sbinfo)
{
return NULL;
}
#endif /* CONFIG_NUMA && CONFIG_TMPFS */
#ifndef CONFIG_NUMA
#define vm_policy vm_private_data
#endif
static void shmem_pseudo_vma_init(struct vm_area_struct *vma,
struct shmem_inode_info *info, pgoff_t index)
{
/* Create a pseudo vma that just contains the policy */
vma_init(vma, NULL);
/* Bias interleave by inode number to distribute better across nodes */
vma->vm_pgoff = index + info->vfs_inode.i_ino;
vma->vm_policy = mpol_shared_policy_lookup(&info->policy, index);
}
static void shmem_pseudo_vma_destroy(struct vm_area_struct *vma)
{
/* Drop reference taken by mpol_shared_policy_lookup() */
mpol_cond_put(vma->vm_policy);
}
static struct page *shmem_swapin(swp_entry_t swap, gfp_t gfp,
struct shmem_inode_info *info, pgoff_t index)
{
struct vm_area_struct pvma;
struct page *page;
struct vm_fault vmf;
mempolicy: rework mempolicy Reference Counting [yet again] After further discussion with Christoph Lameter, it has become clear that my earlier attempts to clean up the mempolicy reference counting were a bit of overkill in some areas, resulting in superflous ref/unref in what are usually fast paths. In other areas, further inspection reveals that I botched the unref for interleave policies. A separate patch, suitable for upstream/stable trees, fixes up the known errors in the previous attempt to fix reference counting. This patch reworks the memory policy referencing counting and, one hopes, simplifies the code. Maybe I'll get it right this time. See the update to the numa_memory_policy.txt document for a discussion of memory policy reference counting that motivates this patch. Summary: Lookup of mempolicy, based on (vma, address) need only add a reference for shared policy, and we need only unref the policy when finished for shared policies. So, this patch backs out all of the unneeded extra reference counting added by my previous attempt. It then unrefs only shared policies when we're finished with them, using the mpol_cond_put() [conditional put] helper function introduced by this patch. Note that shmem_swapin() calls read_swap_cache_async() with a dummy vma containing just the policy. read_swap_cache_async() can call alloc_page_vma() multiple times, so we can't let alloc_page_vma() unref the shared policy in this case. To avoid this, we make a copy of any non-null shared policy and remove the MPOL_F_SHARED flag from the copy. This copy occurs before reading a page [or multiple pages] from swap, so the overhead should not be an issue here. I introduced a new static inline function "mpol_cond_copy()" to copy the shared policy to an on-stack policy and remove the flags that would require a conditional free. The current implementation of mpol_cond_copy() assumes that the struct mempolicy contains no pointers to dynamically allocated structures that must be duplicated or reference counted during copy. Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 16:13:16 +07:00
shmem_pseudo_vma_init(&pvma, info, index);
vmf.vma = &pvma;
vmf.address = 0;
page = swap_cluster_readahead(swap, gfp, &vmf);
shmem_pseudo_vma_destroy(&pvma);
return page;
}
static struct page *shmem_alloc_hugepage(gfp_t gfp,
struct shmem_inode_info *info, pgoff_t index)
{
struct vm_area_struct pvma;
struct address_space *mapping = info->vfs_inode.i_mapping;
pgoff_t hindex;
struct page *page;
hindex = round_down(index, HPAGE_PMD_NR);
if (xa_find(&mapping->i_pages, &hindex, hindex + HPAGE_PMD_NR - 1,
XA_PRESENT))
return NULL;
shmem_pseudo_vma_init(&pvma, info, hindex);
page = alloc_pages_vma(gfp | __GFP_COMP | __GFP_NORETRY | __GFP_NOWARN,
HPAGE_PMD_ORDER, &pvma, 0, numa_node_id(), true);
shmem_pseudo_vma_destroy(&pvma);
if (page)
prep_transhuge_page(page);
else
count_vm_event(THP_FILE_FALLBACK);
return page;
}
static struct page *shmem_alloc_page(gfp_t gfp,
struct shmem_inode_info *info, pgoff_t index)
{
struct vm_area_struct pvma;
struct page *page;
shmem_pseudo_vma_init(&pvma, info, index);
page = alloc_page_vma(gfp, &pvma, 0);
shmem_pseudo_vma_destroy(&pvma);
return page;
}
static struct page *shmem_alloc_and_acct_page(gfp_t gfp,
struct inode *inode,
pgoff_t index, bool huge)
{
struct shmem_inode_info *info = SHMEM_I(inode);
struct page *page;
int nr;
int err = -ENOSPC;
mempolicy: rework mempolicy Reference Counting [yet again] After further discussion with Christoph Lameter, it has become clear that my earlier attempts to clean up the mempolicy reference counting were a bit of overkill in some areas, resulting in superflous ref/unref in what are usually fast paths. In other areas, further inspection reveals that I botched the unref for interleave policies. A separate patch, suitable for upstream/stable trees, fixes up the known errors in the previous attempt to fix reference counting. This patch reworks the memory policy referencing counting and, one hopes, simplifies the code. Maybe I'll get it right this time. See the update to the numa_memory_policy.txt document for a discussion of memory policy reference counting that motivates this patch. Summary: Lookup of mempolicy, based on (vma, address) need only add a reference for shared policy, and we need only unref the policy when finished for shared policies. So, this patch backs out all of the unneeded extra reference counting added by my previous attempt. It then unrefs only shared policies when we're finished with them, using the mpol_cond_put() [conditional put] helper function introduced by this patch. Note that shmem_swapin() calls read_swap_cache_async() with a dummy vma containing just the policy. read_swap_cache_async() can call alloc_page_vma() multiple times, so we can't let alloc_page_vma() unref the shared policy in this case. To avoid this, we make a copy of any non-null shared policy and remove the MPOL_F_SHARED flag from the copy. This copy occurs before reading a page [or multiple pages] from swap, so the overhead should not be an issue here. I introduced a new static inline function "mpol_cond_copy()" to copy the shared policy to an on-stack policy and remove the flags that would require a conditional free. The current implementation of mpol_cond_copy() assumes that the struct mempolicy contains no pointers to dynamically allocated structures that must be duplicated or reference counted during copy. Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 16:13:16 +07:00
if (!IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE))
huge = false;
nr = huge ? HPAGE_PMD_NR : 1;
if (!shmem_inode_acct_block(inode, nr))
goto failed;
if (huge)
page = shmem_alloc_hugepage(gfp, info, index);
else
page = shmem_alloc_page(gfp, info, index);
tmpfs: preliminary minor tidyups Make a few cleanups in mm/shmem.c, before going on to complicate it. shmem_alloc_page() will become more complicated: we can't afford to to have that complication duplicated between a CONFIG_NUMA version and a !CONFIG_NUMA version, so rearrange the #ifdef'ery there to yield a single shmem_swapin() and a single shmem_alloc_page(). Yes, it's a shame to inflict the horrid pseudo-vma on non-NUMA configurations, but eliminating it is a larger cleanup: I have an alloc_pages_mpol() patchset not yet ready - mpol handling is subtle and bug-prone, and changed yet again since my last version. Move __SetPageLocked, __SetPageSwapBacked from shmem_getpage_gfp() to shmem_alloc_page(): that SwapBacked flag will be useful in future, to help to distinguish different cases appropriately. And the SGP_DIRTY variant of SGP_CACHE is hard to understand and of little use (IIRC it dates back to when shmem_getpage() returned the page unlocked): kill it and do the necessary in shmem_file_read_iter(). But an arm64 build then complained that info may be uninitialized (where shmem_getpage_gfp() deletes a freshly alloced page beyond eof), and advancing to an "sgp <= SGP_CACHE" test jogged it back to reality. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Yang Shi <yang.shi@linaro.org> Cc: Ning Qu <quning@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 07:12:44 +07:00
if (page) {
__SetPageLocked(page);
__SetPageSwapBacked(page);
return page;
tmpfs: preliminary minor tidyups Make a few cleanups in mm/shmem.c, before going on to complicate it. shmem_alloc_page() will become more complicated: we can't afford to to have that complication duplicated between a CONFIG_NUMA version and a !CONFIG_NUMA version, so rearrange the #ifdef'ery there to yield a single shmem_swapin() and a single shmem_alloc_page(). Yes, it's a shame to inflict the horrid pseudo-vma on non-NUMA configurations, but eliminating it is a larger cleanup: I have an alloc_pages_mpol() patchset not yet ready - mpol handling is subtle and bug-prone, and changed yet again since my last version. Move __SetPageLocked, __SetPageSwapBacked from shmem_getpage_gfp() to shmem_alloc_page(): that SwapBacked flag will be useful in future, to help to distinguish different cases appropriately. And the SGP_DIRTY variant of SGP_CACHE is hard to understand and of little use (IIRC it dates back to when shmem_getpage() returned the page unlocked): kill it and do the necessary in shmem_file_read_iter(). But an arm64 build then complained that info may be uninitialized (where shmem_getpage_gfp() deletes a freshly alloced page beyond eof), and advancing to an "sgp <= SGP_CACHE" test jogged it back to reality. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Yang Shi <yang.shi@linaro.org> Cc: Ning Qu <quning@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 07:12:44 +07:00
}
err = -ENOMEM;
shmem_inode_unacct_blocks(inode, nr);
failed:
return ERR_PTR(err);
}
mempolicy: use struct mempolicy pointer in shmem_sb_info This patch replaces the mempolicy mode, mode_flags, and nodemask in the shmem_sb_info struct with a struct mempolicy pointer, initialized to NULL. This removes dependency on the details of mempolicy from shmem.c and hugetlbfs inode.c and simplifies the interfaces. mpol_parse_str() in mempolicy.c is changed to return, via a pointer to a pointer arg, a struct mempolicy pointer on success. For MPOL_DEFAULT, the returned pointer is NULL. Further, mpol_parse_str() now takes a 'no_context' argument that causes the input nodemask to be stored in the w.user_nodemask of the created mempolicy for use when the mempolicy is installed in a tmpfs inode shared policy tree. At that time, any cpuset contextualization is applied to the original input nodemask. This preserves the previous behavior where the input nodemask was stored in the superblock. We can think of the returned mempolicy as "context free". Because mpol_parse_str() is now calling mpol_new(), we can remove from mpol_to_str() the semantic checks that mpol_new() already performs. Add 'no_context' parameter to mpol_to_str() to specify that it should format the nodemask in w.user_nodemask for 'bind' and 'interleave' policies. Change mpol_shared_policy_init() to take a pointer to a "context free" struct mempolicy and to create a new, "contextualized" mempolicy using the mode, mode_flags and user_nodemask from the input mempolicy. Note: we know that the mempolicy passed to mpol_to_str() or mpol_shared_policy_init() from a tmpfs superblock is "context free". This is currently the only instance thereof. However, if we found more uses for this concept, and introduced any ambiguity as to whether a mempolicy was context free or not, we could add another internal mode flag to identify context free mempolicies. Then, we could remove the 'no_context' argument from mpol_to_str(). Added shmem_get_sbmpol() to return a reference counted superblock mempolicy, if one exists, to pass to mpol_shared_policy_init(). We must add the reference under the sb stat_lock to prevent races with replacement of the mpol by remount. This reference is removed in mpol_shared_policy_init(). [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: another build fix] [akpm@linux-foundation.org: yet another build fix] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 16:13:26 +07:00
shmem: replace page if mapping excludes its zone The GMA500 GPU driver uses GEM shmem objects, but with a new twist: the backing RAM has to be below 4GB. Not a problem while the boards supported only 4GB: but now Intel's D2700MUD boards support 8GB, and their GMA3600 is managed by the GMA500 driver. shmem/tmpfs has never pretended to support hardware restrictions on the backing memory, but it might have appeared to do so before v3.1, and even now it works fine until a page is swapped out then back in. When read_cache_page_gfp() supplied a freshly allocated page for copy, that compensated for whatever choice might have been made by earlier swapin readahead; but swapoff was likely to destroy the illusion. We'd like to continue to support GMA500, so now add a new shmem_should_replace_page() check on the zone when about to move a page from swapcache to filecache (in swapin and swapoff cases), with shmem_replace_page() to allocate and substitute a suitable page (given gma500/gem.c's mapping_set_gfp_mask GFP_KERNEL | __GFP_DMA32). This does involve a minor extension to mem_cgroup_replace_page_cache() (the page may or may not have already been charged); and I've removed a comment and call to mem_cgroup_uncharge_cache_page(), which in fact is always a no-op while PageSwapCache. Also removed optimization of an unlikely path in shmem_getpage_gfp(), now that we need to check PageSwapCache more carefully (a racing caller might already have made the copy). And at one point shmem_unuse_inode() needs to use the hitherto private page_swapcount(), to guard against racing with inode eviction. It would make sense to extend shmem_should_replace_page(), to cover cpuset and NUMA mempolicy restrictions too, but set that aside for now: needs a cleanup of shmem mempolicy handling, and more testing, and ought to handle swap faults in do_swap_page() as well as shmem. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Stephane Marchesin <marcheu@chromium.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rob Clark <rob.clark@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:38 +07:00
/*
* When a page is moved from swapcache to shmem filecache (either by the
* usual swapin of shmem_getpage_gfp(), or by the less common swapoff of
* shmem_unuse_inode()), it may have been read in earlier from swap, in
* ignorance of the mapping it belongs to. If that mapping has special
* constraints (like the gma500 GEM driver, which requires RAM below 4GB),
* we may need to copy to a suitable page before moving to filecache.
*
* In a future release, this may well be extended to respect cpuset and
* NUMA mempolicy, and applied also to anonymous pages in do_swap_page();
* but for now it is a simple matter of zone.
*/
static bool shmem_should_replace_page(struct page *page, gfp_t gfp)
{
return page_zonenum(page) > gfp_zone(gfp);
}
static int shmem_replace_page(struct page **pagep, gfp_t gfp,
struct shmem_inode_info *info, pgoff_t index)
{
struct page *oldpage, *newpage;
struct address_space *swap_mapping;
swp_entry_t entry;
shmem: replace page if mapping excludes its zone The GMA500 GPU driver uses GEM shmem objects, but with a new twist: the backing RAM has to be below 4GB. Not a problem while the boards supported only 4GB: but now Intel's D2700MUD boards support 8GB, and their GMA3600 is managed by the GMA500 driver. shmem/tmpfs has never pretended to support hardware restrictions on the backing memory, but it might have appeared to do so before v3.1, and even now it works fine until a page is swapped out then back in. When read_cache_page_gfp() supplied a freshly allocated page for copy, that compensated for whatever choice might have been made by earlier swapin readahead; but swapoff was likely to destroy the illusion. We'd like to continue to support GMA500, so now add a new shmem_should_replace_page() check on the zone when about to move a page from swapcache to filecache (in swapin and swapoff cases), with shmem_replace_page() to allocate and substitute a suitable page (given gma500/gem.c's mapping_set_gfp_mask GFP_KERNEL | __GFP_DMA32). This does involve a minor extension to mem_cgroup_replace_page_cache() (the page may or may not have already been charged); and I've removed a comment and call to mem_cgroup_uncharge_cache_page(), which in fact is always a no-op while PageSwapCache. Also removed optimization of an unlikely path in shmem_getpage_gfp(), now that we need to check PageSwapCache more carefully (a racing caller might already have made the copy). And at one point shmem_unuse_inode() needs to use the hitherto private page_swapcount(), to guard against racing with inode eviction. It would make sense to extend shmem_should_replace_page(), to cover cpuset and NUMA mempolicy restrictions too, but set that aside for now: needs a cleanup of shmem mempolicy handling, and more testing, and ought to handle swap faults in do_swap_page() as well as shmem. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Stephane Marchesin <marcheu@chromium.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rob Clark <rob.clark@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:38 +07:00
pgoff_t swap_index;
int error;
oldpage = *pagep;
entry.val = page_private(oldpage);
swap_index = swp_offset(entry);
shmem: replace page if mapping excludes its zone The GMA500 GPU driver uses GEM shmem objects, but with a new twist: the backing RAM has to be below 4GB. Not a problem while the boards supported only 4GB: but now Intel's D2700MUD boards support 8GB, and their GMA3600 is managed by the GMA500 driver. shmem/tmpfs has never pretended to support hardware restrictions on the backing memory, but it might have appeared to do so before v3.1, and even now it works fine until a page is swapped out then back in. When read_cache_page_gfp() supplied a freshly allocated page for copy, that compensated for whatever choice might have been made by earlier swapin readahead; but swapoff was likely to destroy the illusion. We'd like to continue to support GMA500, so now add a new shmem_should_replace_page() check on the zone when about to move a page from swapcache to filecache (in swapin and swapoff cases), with shmem_replace_page() to allocate and substitute a suitable page (given gma500/gem.c's mapping_set_gfp_mask GFP_KERNEL | __GFP_DMA32). This does involve a minor extension to mem_cgroup_replace_page_cache() (the page may or may not have already been charged); and I've removed a comment and call to mem_cgroup_uncharge_cache_page(), which in fact is always a no-op while PageSwapCache. Also removed optimization of an unlikely path in shmem_getpage_gfp(), now that we need to check PageSwapCache more carefully (a racing caller might already have made the copy). And at one point shmem_unuse_inode() needs to use the hitherto private page_swapcount(), to guard against racing with inode eviction. It would make sense to extend shmem_should_replace_page(), to cover cpuset and NUMA mempolicy restrictions too, but set that aside for now: needs a cleanup of shmem mempolicy handling, and more testing, and ought to handle swap faults in do_swap_page() as well as shmem. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Stephane Marchesin <marcheu@chromium.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rob Clark <rob.clark@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:38 +07:00
swap_mapping = page_mapping(oldpage);
/*
* We have arrived here because our zones are constrained, so don't
* limit chance of success by further cpuset and node constraints.
*/
gfp &= ~GFP_CONSTRAINT_MASK;
newpage = shmem_alloc_page(gfp, info, index);
if (!newpage)
return -ENOMEM;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
get_page(newpage);
shmem: replace page if mapping excludes its zone The GMA500 GPU driver uses GEM shmem objects, but with a new twist: the backing RAM has to be below 4GB. Not a problem while the boards supported only 4GB: but now Intel's D2700MUD boards support 8GB, and their GMA3600 is managed by the GMA500 driver. shmem/tmpfs has never pretended to support hardware restrictions on the backing memory, but it might have appeared to do so before v3.1, and even now it works fine until a page is swapped out then back in. When read_cache_page_gfp() supplied a freshly allocated page for copy, that compensated for whatever choice might have been made by earlier swapin readahead; but swapoff was likely to destroy the illusion. We'd like to continue to support GMA500, so now add a new shmem_should_replace_page() check on the zone when about to move a page from swapcache to filecache (in swapin and swapoff cases), with shmem_replace_page() to allocate and substitute a suitable page (given gma500/gem.c's mapping_set_gfp_mask GFP_KERNEL | __GFP_DMA32). This does involve a minor extension to mem_cgroup_replace_page_cache() (the page may or may not have already been charged); and I've removed a comment and call to mem_cgroup_uncharge_cache_page(), which in fact is always a no-op while PageSwapCache. Also removed optimization of an unlikely path in shmem_getpage_gfp(), now that we need to check PageSwapCache more carefully (a racing caller might already have made the copy). And at one point shmem_unuse_inode() needs to use the hitherto private page_swapcount(), to guard against racing with inode eviction. It would make sense to extend shmem_should_replace_page(), to cover cpuset and NUMA mempolicy restrictions too, but set that aside for now: needs a cleanup of shmem mempolicy handling, and more testing, and ought to handle swap faults in do_swap_page() as well as shmem. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Stephane Marchesin <marcheu@chromium.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rob Clark <rob.clark@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:38 +07:00
copy_highpage(newpage, oldpage);
flush_dcache_page(newpage);
shmem: replace page if mapping excludes its zone The GMA500 GPU driver uses GEM shmem objects, but with a new twist: the backing RAM has to be below 4GB. Not a problem while the boards supported only 4GB: but now Intel's D2700MUD boards support 8GB, and their GMA3600 is managed by the GMA500 driver. shmem/tmpfs has never pretended to support hardware restrictions on the backing memory, but it might have appeared to do so before v3.1, and even now it works fine until a page is swapped out then back in. When read_cache_page_gfp() supplied a freshly allocated page for copy, that compensated for whatever choice might have been made by earlier swapin readahead; but swapoff was likely to destroy the illusion. We'd like to continue to support GMA500, so now add a new shmem_should_replace_page() check on the zone when about to move a page from swapcache to filecache (in swapin and swapoff cases), with shmem_replace_page() to allocate and substitute a suitable page (given gma500/gem.c's mapping_set_gfp_mask GFP_KERNEL | __GFP_DMA32). This does involve a minor extension to mem_cgroup_replace_page_cache() (the page may or may not have already been charged); and I've removed a comment and call to mem_cgroup_uncharge_cache_page(), which in fact is always a no-op while PageSwapCache. Also removed optimization of an unlikely path in shmem_getpage_gfp(), now that we need to check PageSwapCache more carefully (a racing caller might already have made the copy). And at one point shmem_unuse_inode() needs to use the hitherto private page_swapcount(), to guard against racing with inode eviction. It would make sense to extend shmem_should_replace_page(), to cover cpuset and NUMA mempolicy restrictions too, but set that aside for now: needs a cleanup of shmem mempolicy handling, and more testing, and ought to handle swap faults in do_swap_page() as well as shmem. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Stephane Marchesin <marcheu@chromium.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rob Clark <rob.clark@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:38 +07:00
__SetPageLocked(newpage);
__SetPageSwapBacked(newpage);
shmem: replace page if mapping excludes its zone The GMA500 GPU driver uses GEM shmem objects, but with a new twist: the backing RAM has to be below 4GB. Not a problem while the boards supported only 4GB: but now Intel's D2700MUD boards support 8GB, and their GMA3600 is managed by the GMA500 driver. shmem/tmpfs has never pretended to support hardware restrictions on the backing memory, but it might have appeared to do so before v3.1, and even now it works fine until a page is swapped out then back in. When read_cache_page_gfp() supplied a freshly allocated page for copy, that compensated for whatever choice might have been made by earlier swapin readahead; but swapoff was likely to destroy the illusion. We'd like to continue to support GMA500, so now add a new shmem_should_replace_page() check on the zone when about to move a page from swapcache to filecache (in swapin and swapoff cases), with shmem_replace_page() to allocate and substitute a suitable page (given gma500/gem.c's mapping_set_gfp_mask GFP_KERNEL | __GFP_DMA32). This does involve a minor extension to mem_cgroup_replace_page_cache() (the page may or may not have already been charged); and I've removed a comment and call to mem_cgroup_uncharge_cache_page(), which in fact is always a no-op while PageSwapCache. Also removed optimization of an unlikely path in shmem_getpage_gfp(), now that we need to check PageSwapCache more carefully (a racing caller might already have made the copy). And at one point shmem_unuse_inode() needs to use the hitherto private page_swapcount(), to guard against racing with inode eviction. It would make sense to extend shmem_should_replace_page(), to cover cpuset and NUMA mempolicy restrictions too, but set that aside for now: needs a cleanup of shmem mempolicy handling, and more testing, and ought to handle swap faults in do_swap_page() as well as shmem. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Stephane Marchesin <marcheu@chromium.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rob Clark <rob.clark@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:38 +07:00
SetPageUptodate(newpage);
set_page_private(newpage, entry.val);
shmem: replace page if mapping excludes its zone The GMA500 GPU driver uses GEM shmem objects, but with a new twist: the backing RAM has to be below 4GB. Not a problem while the boards supported only 4GB: but now Intel's D2700MUD boards support 8GB, and their GMA3600 is managed by the GMA500 driver. shmem/tmpfs has never pretended to support hardware restrictions on the backing memory, but it might have appeared to do so before v3.1, and even now it works fine until a page is swapped out then back in. When read_cache_page_gfp() supplied a freshly allocated page for copy, that compensated for whatever choice might have been made by earlier swapin readahead; but swapoff was likely to destroy the illusion. We'd like to continue to support GMA500, so now add a new shmem_should_replace_page() check on the zone when about to move a page from swapcache to filecache (in swapin and swapoff cases), with shmem_replace_page() to allocate and substitute a suitable page (given gma500/gem.c's mapping_set_gfp_mask GFP_KERNEL | __GFP_DMA32). This does involve a minor extension to mem_cgroup_replace_page_cache() (the page may or may not have already been charged); and I've removed a comment and call to mem_cgroup_uncharge_cache_page(), which in fact is always a no-op while PageSwapCache. Also removed optimization of an unlikely path in shmem_getpage_gfp(), now that we need to check PageSwapCache more carefully (a racing caller might already have made the copy). And at one point shmem_unuse_inode() needs to use the hitherto private page_swapcount(), to guard against racing with inode eviction. It would make sense to extend shmem_should_replace_page(), to cover cpuset and NUMA mempolicy restrictions too, but set that aside for now: needs a cleanup of shmem mempolicy handling, and more testing, and ought to handle swap faults in do_swap_page() as well as shmem. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Stephane Marchesin <marcheu@chromium.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rob Clark <rob.clark@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:38 +07:00
SetPageSwapCache(newpage);
/*
* Our caller will very soon move newpage out of swapcache, but it's
* a nice clean interface for us to replace oldpage by newpage there.
*/
xa_lock_irq(&swap_mapping->i_pages);
error = shmem_replace_entry(swap_mapping, swap_index, oldpage, newpage);
if (!error) {
mem_cgroup_migrate(oldpage, newpage);
__inc_lruvec_page_state(newpage, NR_FILE_PAGES);
__dec_lruvec_page_state(oldpage, NR_FILE_PAGES);
}
xa_unlock_irq(&swap_mapping->i_pages);
shmem: replace page if mapping excludes its zone The GMA500 GPU driver uses GEM shmem objects, but with a new twist: the backing RAM has to be below 4GB. Not a problem while the boards supported only 4GB: but now Intel's D2700MUD boards support 8GB, and their GMA3600 is managed by the GMA500 driver. shmem/tmpfs has never pretended to support hardware restrictions on the backing memory, but it might have appeared to do so before v3.1, and even now it works fine until a page is swapped out then back in. When read_cache_page_gfp() supplied a freshly allocated page for copy, that compensated for whatever choice might have been made by earlier swapin readahead; but swapoff was likely to destroy the illusion. We'd like to continue to support GMA500, so now add a new shmem_should_replace_page() check on the zone when about to move a page from swapcache to filecache (in swapin and swapoff cases), with shmem_replace_page() to allocate and substitute a suitable page (given gma500/gem.c's mapping_set_gfp_mask GFP_KERNEL | __GFP_DMA32). This does involve a minor extension to mem_cgroup_replace_page_cache() (the page may or may not have already been charged); and I've removed a comment and call to mem_cgroup_uncharge_cache_page(), which in fact is always a no-op while PageSwapCache. Also removed optimization of an unlikely path in shmem_getpage_gfp(), now that we need to check PageSwapCache more carefully (a racing caller might already have made the copy). And at one point shmem_unuse_inode() needs to use the hitherto private page_swapcount(), to guard against racing with inode eviction. It would make sense to extend shmem_should_replace_page(), to cover cpuset and NUMA mempolicy restrictions too, but set that aside for now: needs a cleanup of shmem mempolicy handling, and more testing, and ought to handle swap faults in do_swap_page() as well as shmem. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Stephane Marchesin <marcheu@chromium.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rob Clark <rob.clark@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:38 +07:00
if (unlikely(error)) {
/*
* Is this possible? I think not, now that our callers check
* both PageSwapCache and page_private after getting page lock;
* but be defensive. Reverse old to newpage for clear and free.
*/
oldpage = newpage;
} else {
lru_cache_add(newpage);
*pagep = newpage;
}
shmem: replace page if mapping excludes its zone The GMA500 GPU driver uses GEM shmem objects, but with a new twist: the backing RAM has to be below 4GB. Not a problem while the boards supported only 4GB: but now Intel's D2700MUD boards support 8GB, and their GMA3600 is managed by the GMA500 driver. shmem/tmpfs has never pretended to support hardware restrictions on the backing memory, but it might have appeared to do so before v3.1, and even now it works fine until a page is swapped out then back in. When read_cache_page_gfp() supplied a freshly allocated page for copy, that compensated for whatever choice might have been made by earlier swapin readahead; but swapoff was likely to destroy the illusion. We'd like to continue to support GMA500, so now add a new shmem_should_replace_page() check on the zone when about to move a page from swapcache to filecache (in swapin and swapoff cases), with shmem_replace_page() to allocate and substitute a suitable page (given gma500/gem.c's mapping_set_gfp_mask GFP_KERNEL | __GFP_DMA32). This does involve a minor extension to mem_cgroup_replace_page_cache() (the page may or may not have already been charged); and I've removed a comment and call to mem_cgroup_uncharge_cache_page(), which in fact is always a no-op while PageSwapCache. Also removed optimization of an unlikely path in shmem_getpage_gfp(), now that we need to check PageSwapCache more carefully (a racing caller might already have made the copy). And at one point shmem_unuse_inode() needs to use the hitherto private page_swapcount(), to guard against racing with inode eviction. It would make sense to extend shmem_should_replace_page(), to cover cpuset and NUMA mempolicy restrictions too, but set that aside for now: needs a cleanup of shmem mempolicy handling, and more testing, and ought to handle swap faults in do_swap_page() as well as shmem. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Stephane Marchesin <marcheu@chromium.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rob Clark <rob.clark@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:38 +07:00
ClearPageSwapCache(oldpage);
set_page_private(oldpage, 0);
unlock_page(oldpage);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
put_page(oldpage);
put_page(oldpage);
return error;
shmem: replace page if mapping excludes its zone The GMA500 GPU driver uses GEM shmem objects, but with a new twist: the backing RAM has to be below 4GB. Not a problem while the boards supported only 4GB: but now Intel's D2700MUD boards support 8GB, and their GMA3600 is managed by the GMA500 driver. shmem/tmpfs has never pretended to support hardware restrictions on the backing memory, but it might have appeared to do so before v3.1, and even now it works fine until a page is swapped out then back in. When read_cache_page_gfp() supplied a freshly allocated page for copy, that compensated for whatever choice might have been made by earlier swapin readahead; but swapoff was likely to destroy the illusion. We'd like to continue to support GMA500, so now add a new shmem_should_replace_page() check on the zone when about to move a page from swapcache to filecache (in swapin and swapoff cases), with shmem_replace_page() to allocate and substitute a suitable page (given gma500/gem.c's mapping_set_gfp_mask GFP_KERNEL | __GFP_DMA32). This does involve a minor extension to mem_cgroup_replace_page_cache() (the page may or may not have already been charged); and I've removed a comment and call to mem_cgroup_uncharge_cache_page(), which in fact is always a no-op while PageSwapCache. Also removed optimization of an unlikely path in shmem_getpage_gfp(), now that we need to check PageSwapCache more carefully (a racing caller might already have made the copy). And at one point shmem_unuse_inode() needs to use the hitherto private page_swapcount(), to guard against racing with inode eviction. It would make sense to extend shmem_should_replace_page(), to cover cpuset and NUMA mempolicy restrictions too, but set that aside for now: needs a cleanup of shmem mempolicy handling, and more testing, and ought to handle swap faults in do_swap_page() as well as shmem. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Stephane Marchesin <marcheu@chromium.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rob Clark <rob.clark@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:38 +07:00
}
/*
* Swap in the page pointed to by *pagep.
* Caller has to make sure that *pagep contains a valid swapped page.
* Returns 0 and the page in pagep if success. On failure, returns the
* error code and NULL in *pagep.
*/
static int shmem_swapin_page(struct inode *inode, pgoff_t index,
struct page **pagep, enum sgp_type sgp,
gfp_t gfp, struct vm_area_struct *vma,
vm_fault_t *fault_type)
{
struct address_space *mapping = inode->i_mapping;
struct shmem_inode_info *info = SHMEM_I(inode);
struct mm_struct *charge_mm = vma ? vma->vm_mm : current->mm;
struct page *page;
swp_entry_t swap;
int error;
VM_BUG_ON(!*pagep || !xa_is_value(*pagep));
swap = radix_to_swp_entry(*pagep);
*pagep = NULL;
/* Look it up and read it in.. */
page = lookup_swap_cache(swap, NULL, 0);
if (!page) {
/* Or update major stats only when swapin succeeds?? */
if (fault_type) {
*fault_type |= VM_FAULT_MAJOR;
count_vm_event(PGMAJFAULT);
count_memcg_event_mm(charge_mm, PGMAJFAULT);
}
/* Here we actually start the io */
page = shmem_swapin(swap, gfp, info, index);
if (!page) {
error = -ENOMEM;
goto failed;
}
}
/* We have to do this with page locked to prevent races */
lock_page(page);
if (!PageSwapCache(page) || page_private(page) != swap.val ||
!shmem_confirm_swap(mapping, index, swap)) {
error = -EEXIST;
goto unlock;
}
if (!PageUptodate(page)) {
error = -EIO;
goto failed;
}
wait_on_page_writeback(page);
if (shmem_should_replace_page(page, gfp)) {
error = shmem_replace_page(&page, gfp, info, index);
if (error)
goto failed;
}
mm: shmem: remove rare optimization when swapin races with hole punching Commit 215c02bc33bb ("tmpfs: fix shmem_getpage_gfp() VM_BUG_ON") recognized that hole punching can race with swapin and removed the BUG_ON() for a truncated entry from the swapin path. The patch also added a swapcache deletion to optimize this rare case: Since swapin has the page locked, and free_swap_and_cache() merely trylocks, this situation can leave the page stranded in swapcache. Usually, page reclaim picks up stale swapcache pages, and the race can happen at any other time when the page is locked. (The same happens for non-shmem swapin racing with page table zapping.) The thinking here was: we already observed the race and we have the page locked, we may as well do the cleanup instead of waiting for reclaim. However, this optimization complicates the next patch which moves the cgroup charging code around. As this is just a minor speedup for a race condition that is so rare that it required a fuzzer to trigger the original BUG_ON(), it's no longer worth the complications. Suggested-by: Hugh Dickins <hughd@google.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hugh Dickins <hughd@google.com> Cc: Alex Shi <alex.shi@linux.alibaba.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Balbir Singh <bsingharora@gmail.com> Link: http://lkml.kernel.org/r/20200511181056.GA339505@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 06:01:34 +07:00
error = shmem_add_to_page_cache(page, mapping, index,
mm: memcontrol: convert page cache to a new mem_cgroup_charge() API The try/commit/cancel protocol that memcg uses dates back to when pages used to be uncharged upon removal from the page cache, and thus couldn't be committed before the insertion had succeeded. Nowadays, pages are uncharged when they are physically freed; it doesn't matter whether the insertion was successful or not. For the page cache, the transaction dance has become unnecessary. Introduce a mem_cgroup_charge() function that simply charges a newly allocated page to a cgroup and sets up page->mem_cgroup in one single step. If the insertion fails, the caller doesn't have to do anything but free/put the page. Then switch the page cache over to this new API. Subsequent patches will also convert anon pages, but it needs a bit more prep work. Right now, memcg depends on page->mapping being already set up at the time of charging, so that it can maintain its own MEMCG_CACHE and MEMCG_RSS counters. For anon, page->mapping is set under the same pte lock under which the page is publishd, so a single charge point that can block doesn't work there just yet. The following prep patches will replace the private memcg counters with the generic vmstat counters, thus removing the page->mapping dependency, then complete the transition to the new single-point charge API and delete the old transactional scheme. v2: leave shmem swapcache when charging fails to avoid double IO (Joonsoo) v3: rebase on preceeding shmem simplification patch Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Balbir Singh <bsingharora@gmail.com> Link: http://lkml.kernel.org/r/20200508183105.225460-6-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 06:01:41 +07:00
swp_to_radix_entry(swap), gfp,
charge_mm);
if (error)
mm: shmem: remove rare optimization when swapin races with hole punching Commit 215c02bc33bb ("tmpfs: fix shmem_getpage_gfp() VM_BUG_ON") recognized that hole punching can race with swapin and removed the BUG_ON() for a truncated entry from the swapin path. The patch also added a swapcache deletion to optimize this rare case: Since swapin has the page locked, and free_swap_and_cache() merely trylocks, this situation can leave the page stranded in swapcache. Usually, page reclaim picks up stale swapcache pages, and the race can happen at any other time when the page is locked. (The same happens for non-shmem swapin racing with page table zapping.) The thinking here was: we already observed the race and we have the page locked, we may as well do the cleanup instead of waiting for reclaim. However, this optimization complicates the next patch which moves the cgroup charging code around. As this is just a minor speedup for a race condition that is so rare that it required a fuzzer to trigger the original BUG_ON(), it's no longer worth the complications. Suggested-by: Hugh Dickins <hughd@google.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hugh Dickins <hughd@google.com> Cc: Alex Shi <alex.shi@linux.alibaba.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Balbir Singh <bsingharora@gmail.com> Link: http://lkml.kernel.org/r/20200511181056.GA339505@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 06:01:34 +07:00
goto failed;
spin_lock_irq(&info->lock);
info->swapped--;
shmem_recalc_inode(inode);
spin_unlock_irq(&info->lock);
if (sgp == SGP_WRITE)
mark_page_accessed(page);
delete_from_swap_cache(page);
set_page_dirty(page);
swap_free(swap);
*pagep = page;
return 0;
failed:
if (!shmem_confirm_swap(mapping, index, swap))
error = -EEXIST;
unlock:
if (page) {
unlock_page(page);
put_page(page);
}
return error;
}
/*
* shmem_getpage_gfp - find page in cache, or get from swap, or allocate
*
* If we allocate a new one we do not mark it dirty. That's up to the
* vm. If we swap it in we mark it dirty since we also free the swap
* entry since a page cannot live in both the swap and page cache.
*
* vmf and fault_type are only supplied by shmem_fault:
* otherwise they are NULL.
*/
static int shmem_getpage_gfp(struct inode *inode, pgoff_t index,
struct page **pagep, enum sgp_type sgp, gfp_t gfp,
struct vm_area_struct *vma, struct vm_fault *vmf,
vm_fault_t *fault_type)
{
struct address_space *mapping = inode->i_mapping;
struct shmem_inode_info *info = SHMEM_I(inode);
struct shmem_sb_info *sbinfo;
struct mm_struct *charge_mm;
struct page *page;
enum sgp_type sgp_huge = sgp;
pgoff_t hindex = index;
int error;
int once = 0;
int alloced = 0;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
if (index > (MAX_LFS_FILESIZE >> PAGE_SHIFT))
return -EFBIG;
if (sgp == SGP_NOHUGE || sgp == SGP_HUGE)
sgp = SGP_CACHE;
repeat:
if (sgp <= SGP_CACHE &&
((loff_t)index << PAGE_SHIFT) >= i_size_read(inode)) {
return -EINVAL;
}
sbinfo = SHMEM_SB(inode->i_sb);
charge_mm = vma ? vma->vm_mm : current->mm;
2014-04-04 04:47:46 +07:00
page = find_lock_entry(mapping, index);
if (xa_is_value(page)) {
error = shmem_swapin_page(inode, index, &page,
sgp, gfp, vma, fault_type);
if (error == -EEXIST)
goto repeat;
*pagep = page;
return error;
}
if (page && sgp == SGP_WRITE)
mark_page_accessed(page);
/* fallocated page? */
if (page && !PageUptodate(page)) {
if (sgp != SGP_READ)
goto clear;
unlock_page(page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
put_page(page);
page = NULL;
}
if (page || sgp == SGP_READ) {
*pagep = page;
return 0;
}
/*
* Fast cache lookup did not find it:
* bring it back from swap or allocate.
*/
if (vma && userfaultfd_missing(vma)) {
*fault_type = handle_userfault(vmf, VM_UFFD_MISSING);
return 0;
}
/* shmem_symlink() */
if (mapping->a_ops != &shmem_aops)
goto alloc_nohuge;
if (shmem_huge == SHMEM_HUGE_DENY || sgp_huge == SGP_NOHUGE)
goto alloc_nohuge;
if (shmem_huge == SHMEM_HUGE_FORCE)
goto alloc_huge;
switch (sbinfo->huge) {
case SHMEM_HUGE_NEVER:
goto alloc_nohuge;
case SHMEM_HUGE_WITHIN_SIZE: {
loff_t i_size;
pgoff_t off;
off = round_up(index, HPAGE_PMD_NR);
i_size = round_up(i_size_read(inode), PAGE_SIZE);
if (i_size >= HPAGE_PMD_SIZE &&
i_size >> PAGE_SHIFT >= off)
goto alloc_huge;
fallthrough;
}
case SHMEM_HUGE_ADVISE:
if (sgp_huge == SGP_HUGE)
goto alloc_huge;
/* TODO: implement fadvise() hints */
goto alloc_nohuge;
}
alloc_huge:
page = shmem_alloc_and_acct_page(gfp, inode, index, true);
if (IS_ERR(page)) {
alloc_nohuge:
page = shmem_alloc_and_acct_page(gfp, inode,
index, false);
}
if (IS_ERR(page)) {
int retry = 5;
error = PTR_ERR(page);
page = NULL;
if (error != -ENOSPC)
goto unlock;
/*
* Try to reclaim some space by splitting a huge page
* beyond i_size on the filesystem.
*/
while (retry--) {
int ret;
ret = shmem_unused_huge_shrink(sbinfo, NULL, 1);
if (ret == SHRINK_STOP)
break;
if (ret)
goto alloc_nohuge;
}
goto unlock;
}
if (PageTransHuge(page))
hindex = round_down(index, HPAGE_PMD_NR);
else
hindex = index;
if (sgp == SGP_WRITE)
__SetPageReferenced(page);
error = shmem_add_to_page_cache(page, mapping, hindex,
mm: memcontrol: convert page cache to a new mem_cgroup_charge() API The try/commit/cancel protocol that memcg uses dates back to when pages used to be uncharged upon removal from the page cache, and thus couldn't be committed before the insertion had succeeded. Nowadays, pages are uncharged when they are physically freed; it doesn't matter whether the insertion was successful or not. For the page cache, the transaction dance has become unnecessary. Introduce a mem_cgroup_charge() function that simply charges a newly allocated page to a cgroup and sets up page->mem_cgroup in one single step. If the insertion fails, the caller doesn't have to do anything but free/put the page. Then switch the page cache over to this new API. Subsequent patches will also convert anon pages, but it needs a bit more prep work. Right now, memcg depends on page->mapping being already set up at the time of charging, so that it can maintain its own MEMCG_CACHE and MEMCG_RSS counters. For anon, page->mapping is set under the same pte lock under which the page is publishd, so a single charge point that can block doesn't work there just yet. The following prep patches will replace the private memcg counters with the generic vmstat counters, thus removing the page->mapping dependency, then complete the transition to the new single-point charge API and delete the old transactional scheme. v2: leave shmem swapcache when charging fails to avoid double IO (Joonsoo) v3: rebase on preceeding shmem simplification patch Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Balbir Singh <bsingharora@gmail.com> Link: http://lkml.kernel.org/r/20200508183105.225460-6-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 06:01:41 +07:00
NULL, gfp & GFP_RECLAIM_MASK,
charge_mm);
if (error)
goto unacct;
lru_cache_add(page);
spin_lock_irq(&info->lock);
info->alloced += compound_nr(page);
inode->i_blocks += BLOCKS_PER_PAGE << compound_order(page);
shmem_recalc_inode(inode);
spin_unlock_irq(&info->lock);
alloced = true;
if (PageTransHuge(page) &&
DIV_ROUND_UP(i_size_read(inode), PAGE_SIZE) <
hindex + HPAGE_PMD_NR - 1) {
/*
* Part of the huge page is beyond i_size: subject
* to shrink under memory pressure.
*/
spin_lock(&sbinfo->shrinklist_lock);
/*
* _careful to defend against unlocked access to
* ->shrink_list in shmem_unused_huge_shrink()
*/
if (list_empty_careful(&info->shrinklist)) {
list_add_tail(&info->shrinklist,
&sbinfo->shrinklist);
sbinfo->shrinklist_len++;
}
spin_unlock(&sbinfo->shrinklist_lock);
}
/*
* Let SGP_FALLOC use the SGP_WRITE optimization on a new page.
*/
if (sgp == SGP_FALLOC)
sgp = SGP_WRITE;
clear:
/*
* Let SGP_WRITE caller clear ends if write does not fill page;
* but SGP_FALLOC on a page fallocated earlier must initialize
* it now, lest undo on failure cancel our earlier guarantee.
*/
if (sgp != SGP_WRITE && !PageUptodate(page)) {
struct page *head = compound_head(page);
int i;
for (i = 0; i < compound_nr(head); i++) {
clear_highpage(head + i);
flush_dcache_page(head + i);
}
SetPageUptodate(head);
}
shmem: replace page if mapping excludes its zone The GMA500 GPU driver uses GEM shmem objects, but with a new twist: the backing RAM has to be below 4GB. Not a problem while the boards supported only 4GB: but now Intel's D2700MUD boards support 8GB, and their GMA3600 is managed by the GMA500 driver. shmem/tmpfs has never pretended to support hardware restrictions on the backing memory, but it might have appeared to do so before v3.1, and even now it works fine until a page is swapped out then back in. When read_cache_page_gfp() supplied a freshly allocated page for copy, that compensated for whatever choice might have been made by earlier swapin readahead; but swapoff was likely to destroy the illusion. We'd like to continue to support GMA500, so now add a new shmem_should_replace_page() check on the zone when about to move a page from swapcache to filecache (in swapin and swapoff cases), with shmem_replace_page() to allocate and substitute a suitable page (given gma500/gem.c's mapping_set_gfp_mask GFP_KERNEL | __GFP_DMA32). This does involve a minor extension to mem_cgroup_replace_page_cache() (the page may or may not have already been charged); and I've removed a comment and call to mem_cgroup_uncharge_cache_page(), which in fact is always a no-op while PageSwapCache. Also removed optimization of an unlikely path in shmem_getpage_gfp(), now that we need to check PageSwapCache more carefully (a racing caller might already have made the copy). And at one point shmem_unuse_inode() needs to use the hitherto private page_swapcount(), to guard against racing with inode eviction. It would make sense to extend shmem_should_replace_page(), to cover cpuset and NUMA mempolicy restrictions too, but set that aside for now: needs a cleanup of shmem mempolicy handling, and more testing, and ought to handle swap faults in do_swap_page() as well as shmem. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Stephane Marchesin <marcheu@chromium.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rob Clark <rob.clark@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:38 +07:00
/* Perhaps the file has been truncated since we checked */
tmpfs: preliminary minor tidyups Make a few cleanups in mm/shmem.c, before going on to complicate it. shmem_alloc_page() will become more complicated: we can't afford to to have that complication duplicated between a CONFIG_NUMA version and a !CONFIG_NUMA version, so rearrange the #ifdef'ery there to yield a single shmem_swapin() and a single shmem_alloc_page(). Yes, it's a shame to inflict the horrid pseudo-vma on non-NUMA configurations, but eliminating it is a larger cleanup: I have an alloc_pages_mpol() patchset not yet ready - mpol handling is subtle and bug-prone, and changed yet again since my last version. Move __SetPageLocked, __SetPageSwapBacked from shmem_getpage_gfp() to shmem_alloc_page(): that SwapBacked flag will be useful in future, to help to distinguish different cases appropriately. And the SGP_DIRTY variant of SGP_CACHE is hard to understand and of little use (IIRC it dates back to when shmem_getpage() returned the page unlocked): kill it and do the necessary in shmem_file_read_iter(). But an arm64 build then complained that info may be uninitialized (where shmem_getpage_gfp() deletes a freshly alloced page beyond eof), and advancing to an "sgp <= SGP_CACHE" test jogged it back to reality. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Yang Shi <yang.shi@linaro.org> Cc: Ning Qu <quning@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 07:12:44 +07:00
if (sgp <= SGP_CACHE &&
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
((loff_t)index << PAGE_SHIFT) >= i_size_read(inode)) {
tmpfs: fix shmem_evict_inode() warnings on i_blocks Dmitry Vyukov provides a little program, autogenerated by syzkaller, which races a fault on a mapping of a sparse memfd object, against truncation of that object below the fault address: run repeatedly for a few minutes, it reliably generates shmem_evict_inode()'s WARN_ON(inode->i_blocks). (But there's nothing specific to memfd here, nor to the fstat which it happened to use to generate the fault: though that looked suspicious, since a shmem_recalc_inode() had been added there recently. The same problem can be reproduced with open+unlink in place of memfd_create, and with fstatfs in place of fstat.) v3.7 commit 0f3c42f522dc ("tmpfs: change final i_blocks BUG to WARNING") explains one cause of such a warning (a race with shmem_writepage to swap), and possible solutions; but we never took it further, and this syzkaller incident turns out to have a different cause. shmem_getpage_gfp()'s error recovery, when a freshly allocated page is then found to be beyond eof, looks plausible - decrementing the alloced count that was just before incremented - but in fact can go wrong, if a racing thread (the truncator, for example) gets its shmem_recalc_inode() in just after our delete_from_page_cache(). delete_from_page_cache() decrements nrpages, that shmem_recalc_inode() will balance the books by decrementing alloced itself, then our decrement of alloced take it one too low: leading to the WARNING when the object is finally evicted. Once the new page has been exposed in the page cache, shmem_getpage_gfp() must leave it to shmem_recalc_inode() itself to get the accounting right in all cases (and not fall through from "trunc:" to "decused:"). Adjust that error recovery block; and the reinitialization of info and sbinfo can be removed too. While we're here, fix shmem_writepage() to avoid the original issue: it will be safe against a racing shmem_recalc_inode(), if it merely increments swapped before the shmem_delete_from_page_cache() which decrements nrpages (but it must then do its own shmem_recalc_inode() before that, while still in balance, instead of after). (Aside: why do we shmem_recalc_inode() here in the swap path? Because its raison d'etre is to cope with clean sparse shmem pages being reclaimed behind our back: so here when swapping is a good place to look for that case.) But I've not now managed to reproduce this bug, even without the patch. I don't see why I didn't do that earlier: perhaps inhibited by the preference to eliminate shmem_recalc_inode() altogether. Driven by this incident, I do now have a patch to do so at last; but still want to sit on it for a bit, there's a couple of questions yet to be resolved. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-12 04:40:55 +07:00
if (alloced) {
ClearPageDirty(page);
delete_from_page_cache(page);
spin_lock_irq(&info->lock);
tmpfs: fix shmem_evict_inode() warnings on i_blocks Dmitry Vyukov provides a little program, autogenerated by syzkaller, which races a fault on a mapping of a sparse memfd object, against truncation of that object below the fault address: run repeatedly for a few minutes, it reliably generates shmem_evict_inode()'s WARN_ON(inode->i_blocks). (But there's nothing specific to memfd here, nor to the fstat which it happened to use to generate the fault: though that looked suspicious, since a shmem_recalc_inode() had been added there recently. The same problem can be reproduced with open+unlink in place of memfd_create, and with fstatfs in place of fstat.) v3.7 commit 0f3c42f522dc ("tmpfs: change final i_blocks BUG to WARNING") explains one cause of such a warning (a race with shmem_writepage to swap), and possible solutions; but we never took it further, and this syzkaller incident turns out to have a different cause. shmem_getpage_gfp()'s error recovery, when a freshly allocated page is then found to be beyond eof, looks plausible - decrementing the alloced count that was just before incremented - but in fact can go wrong, if a racing thread (the truncator, for example) gets its shmem_recalc_inode() in just after our delete_from_page_cache(). delete_from_page_cache() decrements nrpages, that shmem_recalc_inode() will balance the books by decrementing alloced itself, then our decrement of alloced take it one too low: leading to the WARNING when the object is finally evicted. Once the new page has been exposed in the page cache, shmem_getpage_gfp() must leave it to shmem_recalc_inode() itself to get the accounting right in all cases (and not fall through from "trunc:" to "decused:"). Adjust that error recovery block; and the reinitialization of info and sbinfo can be removed too. While we're here, fix shmem_writepage() to avoid the original issue: it will be safe against a racing shmem_recalc_inode(), if it merely increments swapped before the shmem_delete_from_page_cache() which decrements nrpages (but it must then do its own shmem_recalc_inode() before that, while still in balance, instead of after). (Aside: why do we shmem_recalc_inode() here in the swap path? Because its raison d'etre is to cope with clean sparse shmem pages being reclaimed behind our back: so here when swapping is a good place to look for that case.) But I've not now managed to reproduce this bug, even without the patch. I don't see why I didn't do that earlier: perhaps inhibited by the preference to eliminate shmem_recalc_inode() altogether. Driven by this incident, I do now have a patch to do so at last; but still want to sit on it for a bit, there's a couple of questions yet to be resolved. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-12 04:40:55 +07:00
shmem_recalc_inode(inode);
spin_unlock_irq(&info->lock);
tmpfs: fix shmem_evict_inode() warnings on i_blocks Dmitry Vyukov provides a little program, autogenerated by syzkaller, which races a fault on a mapping of a sparse memfd object, against truncation of that object below the fault address: run repeatedly for a few minutes, it reliably generates shmem_evict_inode()'s WARN_ON(inode->i_blocks). (But there's nothing specific to memfd here, nor to the fstat which it happened to use to generate the fault: though that looked suspicious, since a shmem_recalc_inode() had been added there recently. The same problem can be reproduced with open+unlink in place of memfd_create, and with fstatfs in place of fstat.) v3.7 commit 0f3c42f522dc ("tmpfs: change final i_blocks BUG to WARNING") explains one cause of such a warning (a race with shmem_writepage to swap), and possible solutions; but we never took it further, and this syzkaller incident turns out to have a different cause. shmem_getpage_gfp()'s error recovery, when a freshly allocated page is then found to be beyond eof, looks plausible - decrementing the alloced count that was just before incremented - but in fact can go wrong, if a racing thread (the truncator, for example) gets its shmem_recalc_inode() in just after our delete_from_page_cache(). delete_from_page_cache() decrements nrpages, that shmem_recalc_inode() will balance the books by decrementing alloced itself, then our decrement of alloced take it one too low: leading to the WARNING when the object is finally evicted. Once the new page has been exposed in the page cache, shmem_getpage_gfp() must leave it to shmem_recalc_inode() itself to get the accounting right in all cases (and not fall through from "trunc:" to "decused:"). Adjust that error recovery block; and the reinitialization of info and sbinfo can be removed too. While we're here, fix shmem_writepage() to avoid the original issue: it will be safe against a racing shmem_recalc_inode(), if it merely increments swapped before the shmem_delete_from_page_cache() which decrements nrpages (but it must then do its own shmem_recalc_inode() before that, while still in balance, instead of after). (Aside: why do we shmem_recalc_inode() here in the swap path? Because its raison d'etre is to cope with clean sparse shmem pages being reclaimed behind our back: so here when swapping is a good place to look for that case.) But I've not now managed to reproduce this bug, even without the patch. I don't see why I didn't do that earlier: perhaps inhibited by the preference to eliminate shmem_recalc_inode() altogether. Driven by this incident, I do now have a patch to do so at last; but still want to sit on it for a bit, there's a couple of questions yet to be resolved. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-12 04:40:55 +07:00
}
error = -EINVAL;
tmpfs: fix shmem_evict_inode() warnings on i_blocks Dmitry Vyukov provides a little program, autogenerated by syzkaller, which races a fault on a mapping of a sparse memfd object, against truncation of that object below the fault address: run repeatedly for a few minutes, it reliably generates shmem_evict_inode()'s WARN_ON(inode->i_blocks). (But there's nothing specific to memfd here, nor to the fstat which it happened to use to generate the fault: though that looked suspicious, since a shmem_recalc_inode() had been added there recently. The same problem can be reproduced with open+unlink in place of memfd_create, and with fstatfs in place of fstat.) v3.7 commit 0f3c42f522dc ("tmpfs: change final i_blocks BUG to WARNING") explains one cause of such a warning (a race with shmem_writepage to swap), and possible solutions; but we never took it further, and this syzkaller incident turns out to have a different cause. shmem_getpage_gfp()'s error recovery, when a freshly allocated page is then found to be beyond eof, looks plausible - decrementing the alloced count that was just before incremented - but in fact can go wrong, if a racing thread (the truncator, for example) gets its shmem_recalc_inode() in just after our delete_from_page_cache(). delete_from_page_cache() decrements nrpages, that shmem_recalc_inode() will balance the books by decrementing alloced itself, then our decrement of alloced take it one too low: leading to the WARNING when the object is finally evicted. Once the new page has been exposed in the page cache, shmem_getpage_gfp() must leave it to shmem_recalc_inode() itself to get the accounting right in all cases (and not fall through from "trunc:" to "decused:"). Adjust that error recovery block; and the reinitialization of info and sbinfo can be removed too. While we're here, fix shmem_writepage() to avoid the original issue: it will be safe against a racing shmem_recalc_inode(), if it merely increments swapped before the shmem_delete_from_page_cache() which decrements nrpages (but it must then do its own shmem_recalc_inode() before that, while still in balance, instead of after). (Aside: why do we shmem_recalc_inode() here in the swap path? Because its raison d'etre is to cope with clean sparse shmem pages being reclaimed behind our back: so here when swapping is a good place to look for that case.) But I've not now managed to reproduce this bug, even without the patch. I don't see why I didn't do that earlier: perhaps inhibited by the preference to eliminate shmem_recalc_inode() altogether. Driven by this incident, I do now have a patch to do so at last; but still want to sit on it for a bit, there's a couple of questions yet to be resolved. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-12 04:40:55 +07:00
goto unlock;
}
*pagep = page + index - hindex;
return 0;
/*
* Error recovery.
*/
unacct:
shmem_inode_unacct_blocks(inode, compound_nr(page));
if (PageTransHuge(page)) {
unlock_page(page);
put_page(page);
goto alloc_nohuge;
}
shmem: fix negative rss in memcg memory.stat When adding the page_private checks before calling shmem_replace_page(), I did realize that there is a further race, but thought it too unlikely to need a hurried fix. But independently I've been chasing why a mem cgroup's memory.stat sometimes shows negative rss after all tasks have gone: I expected it to be a stats gathering bug, but actually it's shmem swapping's fault. It's an old surprise, that when you lock_page(lookup_swap_cache(swap)), the page may have been removed from swapcache before getting the lock; or it may have been freed and reused and be back in swapcache; and it can even be using the same swap location as before (page_private same). The swapoff case is already secure against this (swap cannot be reused until the whole area has been swapped off, and a new swapped on); and shmem_getpage_gfp() is protected by shmem_add_to_page_cache()'s check for the expected radix_tree entry - but a little too late. By that time, we might have already decided to shmem_replace_page(): I don't know of a problem from that, but I'd feel more at ease not to do so spuriously. And we have already done mem_cgroup_cache_charge(), on perhaps the wrong mem cgroup: and this charge is not then undone on the error path, because PageSwapCache ends up preventing that. It's this last case which causes the occasional negative rss in memory.stat: the page is charged here as cache, but (sometimes) found to be anon when eventually it's uncharged - and in between, it's an undeserved charge on the wrong memcg. Fix this by adding an earlier check on the radix_tree entry: it's inelegant to descend the tree twice, but swapping is not the fast path, and a better solution would need a pair (try+commit) of memcg calls, and a rework of shmem_replace_page() to keep out of the swapcache. We can use the added shmem_confirm_swap() function to replace the find_get_page+page_cache_release we were already doing on the error path. And add a comment on that -EEXIST: it seems a peculiar errno to be using, but originates from its use in radix_tree_insert(). [It can be surprising to see positive rss left in a memcg's memory.stat after all tasks have gone, since it is supposed to count anonymous but not shmem. Aside from sharing anon pages via fork with a task in some other memcg, it often happens after swapping: because a swap page can't be freed while under writeback, nor while locked. So it's not an error, and these residual pages are easily freed once pressure demands.] Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-12 04:02:47 +07:00
unlock:
if (page) {
unlock_page(page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
put_page(page);
}
if (error == -ENOSPC && !once++) {
spin_lock_irq(&info->lock);
shmem_recalc_inode(inode);
spin_unlock_irq(&info->lock);
goto repeat;
}
if (error == -EEXIST)
goto repeat;
return error;
}
shmem: fix shm fallocate() list corruption The shmem hole punching with fallocate(FALLOC_FL_PUNCH_HOLE) does not want to race with generating new pages by faulting them in. However, the wait-queue used to delay the page faulting has a serious problem: the wait queue head (in shmem_fallocate()) is allocated on the stack, and the code expects that "wake_up_all()" will make sure that all the queue entries are gone before the stack frame is de-allocated. And that is not at all necessarily the case. Yes, a normal wake-up sequence will remove the wait-queue entry that caused the wakeup (see "autoremove_wake_function()"), but the key wording there is "that caused the wakeup". When there are multiple possible wakeup sources, the wait queue entry may well stay around. And _particularly_ in a page fault path, we may be faulting in new pages from user space while we also have other things going on, and there may well be other pending wakeups. So despite the "wake_up_all()", it's not at all guaranteed that all list entries are removed from the wait queue head on the stack. Fix this by introducing a new wakeup function that removes the list entry unconditionally, even if the target process had already woken up for other reasons. Use that "synchronous" function to set up the waiters in shmem_fault(). This problem has never been seen in the wild afaik, but Dave Jones has reported it on and off while running trinity. We thought we fixed the stack corruption with the blk-mq rq_list locking fix (commit 7fe311302f7d: "blk-mq: update hardware and software queues for sleeping alloc"), but it turns out there was _another_ stack corruptor hiding in the trinity runs. Vegard Nossum (also running trinity) was able to trigger this one fairly consistently, and made us look once again at the shmem code due to the faults often being in that area. Reported-and-tested-by: Vegard Nossum <vegard.nossum@oracle.com>. Reported-by: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-06 03:10:29 +07:00
/*
* This is like autoremove_wake_function, but it removes the wait queue
* entry unconditionally - even if something else had already woken the
* target.
*/
static int synchronous_wake_function(wait_queue_entry_t *wait, unsigned mode, int sync, void *key)
shmem: fix shm fallocate() list corruption The shmem hole punching with fallocate(FALLOC_FL_PUNCH_HOLE) does not want to race with generating new pages by faulting them in. However, the wait-queue used to delay the page faulting has a serious problem: the wait queue head (in shmem_fallocate()) is allocated on the stack, and the code expects that "wake_up_all()" will make sure that all the queue entries are gone before the stack frame is de-allocated. And that is not at all necessarily the case. Yes, a normal wake-up sequence will remove the wait-queue entry that caused the wakeup (see "autoremove_wake_function()"), but the key wording there is "that caused the wakeup". When there are multiple possible wakeup sources, the wait queue entry may well stay around. And _particularly_ in a page fault path, we may be faulting in new pages from user space while we also have other things going on, and there may well be other pending wakeups. So despite the "wake_up_all()", it's not at all guaranteed that all list entries are removed from the wait queue head on the stack. Fix this by introducing a new wakeup function that removes the list entry unconditionally, even if the target process had already woken up for other reasons. Use that "synchronous" function to set up the waiters in shmem_fault(). This problem has never been seen in the wild afaik, but Dave Jones has reported it on and off while running trinity. We thought we fixed the stack corruption with the blk-mq rq_list locking fix (commit 7fe311302f7d: "blk-mq: update hardware and software queues for sleeping alloc"), but it turns out there was _another_ stack corruptor hiding in the trinity runs. Vegard Nossum (also running trinity) was able to trigger this one fairly consistently, and made us look once again at the shmem code due to the faults often being in that area. Reported-and-tested-by: Vegard Nossum <vegard.nossum@oracle.com>. Reported-by: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-06 03:10:29 +07:00
{
int ret = default_wake_function(wait, mode, sync, key);
sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list naming So I've noticed a number of instances where it was not obvious from the code whether ->task_list was for a wait-queue head or a wait-queue entry. Furthermore, there's a number of wait-queue users where the lists are not for 'tasks' but other entities (poll tables, etc.), in which case the 'task_list' name is actively confusing. To clear this all up, name the wait-queue head and entry list structure fields unambiguously: struct wait_queue_head::task_list => ::head struct wait_queue_entry::task_list => ::entry For example, this code: rqw->wait.task_list.next != &wait->task_list ... is was pretty unclear (to me) what it's doing, while now it's written this way: rqw->wait.head.next != &wait->entry ... which makes it pretty clear that we are iterating a list until we see the head. Other examples are: list_for_each_entry_safe(pos, next, &x->task_list, task_list) { list_for_each_entry(wq, &fence->wait.task_list, task_list) { ... where it's unclear (to me) what we are iterating, and during review it's hard to tell whether it's trying to walk a wait-queue entry (which would be a bug), while now it's written as: list_for_each_entry_safe(pos, next, &x->head, entry) { list_for_each_entry(wq, &fence->wait.head, entry) { Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20 17:06:46 +07:00
list_del_init(&wait->entry);
shmem: fix shm fallocate() list corruption The shmem hole punching with fallocate(FALLOC_FL_PUNCH_HOLE) does not want to race with generating new pages by faulting them in. However, the wait-queue used to delay the page faulting has a serious problem: the wait queue head (in shmem_fallocate()) is allocated on the stack, and the code expects that "wake_up_all()" will make sure that all the queue entries are gone before the stack frame is de-allocated. And that is not at all necessarily the case. Yes, a normal wake-up sequence will remove the wait-queue entry that caused the wakeup (see "autoremove_wake_function()"), but the key wording there is "that caused the wakeup". When there are multiple possible wakeup sources, the wait queue entry may well stay around. And _particularly_ in a page fault path, we may be faulting in new pages from user space while we also have other things going on, and there may well be other pending wakeups. So despite the "wake_up_all()", it's not at all guaranteed that all list entries are removed from the wait queue head on the stack. Fix this by introducing a new wakeup function that removes the list entry unconditionally, even if the target process had already woken up for other reasons. Use that "synchronous" function to set up the waiters in shmem_fault(). This problem has never been seen in the wild afaik, but Dave Jones has reported it on and off while running trinity. We thought we fixed the stack corruption with the blk-mq rq_list locking fix (commit 7fe311302f7d: "blk-mq: update hardware and software queues for sleeping alloc"), but it turns out there was _another_ stack corruptor hiding in the trinity runs. Vegard Nossum (also running trinity) was able to trigger this one fairly consistently, and made us look once again at the shmem code due to the faults often being in that area. Reported-and-tested-by: Vegard Nossum <vegard.nossum@oracle.com>. Reported-by: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-06 03:10:29 +07:00
return ret;
}
static vm_fault_t shmem_fault(struct vm_fault *vmf)
{
struct vm_area_struct *vma = vmf->vma;
struct inode *inode = file_inode(vma->vm_file);
gfp_t gfp = mapping_gfp_mask(inode->i_mapping);
enum sgp_type sgp;
int err;
vm_fault_t ret = VM_FAULT_LOCKED;
/*
* Trinity finds that probing a hole which tmpfs is punching can
* prevent the hole-punch from ever completing: which in turn
* locks writers out with its hold on i_mutex. So refrain from
shmem: fix faulting into a hole, not taking i_mutex Commit f00cdc6df7d7 ("shmem: fix faulting into a hole while it's punched") was buggy: Sasha sent a lockdep report to remind us that grabbing i_mutex in the fault path is a no-no (write syscall may already hold i_mutex while faulting user buffer). We tried a completely different approach (see following patch) but that proved inadequate: good enough for a rational workload, but not good enough against trinity - which forks off so many mappings of the object that contention on i_mmap_mutex while hole-puncher holds i_mutex builds into serious starvation when concurrent faults force the puncher to fall back to single-page unmap_mapping_range() searches of the i_mmap tree. So return to the original umbrella approach, but keep away from i_mutex this time. We really don't want to bloat every shmem inode with a new mutex or completion, just to protect this unlikely case from trinity. So extend the original with wait_queue_head on stack at the hole-punch end, and wait_queue item on the stack at the fault end. This involves further use of i_lock to guard against the races: lockdep has been happy so far, and I see fs/inode.c:unlock_new_inode() holds i_lock around wake_up_bit(), which is comparable to what we do here. i_lock is more convenient, but we could switch to shmem's info->lock. This issue has been tagged with CVE-2014-4171, which will require commit f00cdc6df7d7 and this and the following patch to be backported: we suggest to 3.1+, though in fact the trinity forkbomb effect might go back as far as 2.6.16, when madvise(,,MADV_REMOVE) came in - or might not, since much has changed, with i_mmap_mutex a spinlock before 3.0. Anyone running trinity on 3.0 and earlier? I don't think we need care. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lukas Czerner <lczerner@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: <stable@vger.kernel.org> [3.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-24 04:00:10 +07:00
* faulting pages into the hole while it's being punched. Although
* shmem_undo_range() does remove the additions, it may be unable to
* keep up, as each new page needs its own unmap_mapping_range() call,
* and the i_mmap tree grows ever slower to scan if new vmas are added.
*
* It does not matter if we sometimes reach this check just before the
* hole-punch begins, so that one fault then races with the punch:
* we just need to make racing faults a rare case.
*
* The implementation below would be much simpler if we just used a
* standard mutex or completion: but we cannot take i_mutex in fault,
* and bloating every shmem inode for this unlikely case would be sad.
*/
if (unlikely(inode->i_private)) {
struct shmem_falloc *shmem_falloc;
spin_lock(&inode->i_lock);
shmem_falloc = inode->i_private;
shmem: fix faulting into a hole, not taking i_mutex Commit f00cdc6df7d7 ("shmem: fix faulting into a hole while it's punched") was buggy: Sasha sent a lockdep report to remind us that grabbing i_mutex in the fault path is a no-no (write syscall may already hold i_mutex while faulting user buffer). We tried a completely different approach (see following patch) but that proved inadequate: good enough for a rational workload, but not good enough against trinity - which forks off so many mappings of the object that contention on i_mmap_mutex while hole-puncher holds i_mutex builds into serious starvation when concurrent faults force the puncher to fall back to single-page unmap_mapping_range() searches of the i_mmap tree. So return to the original umbrella approach, but keep away from i_mutex this time. We really don't want to bloat every shmem inode with a new mutex or completion, just to protect this unlikely case from trinity. So extend the original with wait_queue_head on stack at the hole-punch end, and wait_queue item on the stack at the fault end. This involves further use of i_lock to guard against the races: lockdep has been happy so far, and I see fs/inode.c:unlock_new_inode() holds i_lock around wake_up_bit(), which is comparable to what we do here. i_lock is more convenient, but we could switch to shmem's info->lock. This issue has been tagged with CVE-2014-4171, which will require commit f00cdc6df7d7 and this and the following patch to be backported: we suggest to 3.1+, though in fact the trinity forkbomb effect might go back as far as 2.6.16, when madvise(,,MADV_REMOVE) came in - or might not, since much has changed, with i_mmap_mutex a spinlock before 3.0. Anyone running trinity on 3.0 and earlier? I don't think we need care. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lukas Czerner <lczerner@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: <stable@vger.kernel.org> [3.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-24 04:00:10 +07:00
if (shmem_falloc &&
shmem_falloc->waitq &&
vmf->pgoff >= shmem_falloc->start &&
vmf->pgoff < shmem_falloc->next) {
shmem: pin the file in shmem_fault() if mmap_sem is dropped syzbot found the following crash: BUG: KASAN: use-after-free in perf_trace_lock_acquire+0x401/0x530 include/trace/events/lock.h:13 Read of size 8 at addr ffff8880a5cf2c50 by task syz-executor.0/26173 CPU: 0 PID: 26173 Comm: syz-executor.0 Not tainted 5.3.0-rc6 #146 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: perf_trace_lock_acquire+0x401/0x530 include/trace/events/lock.h:13 trace_lock_acquire include/trace/events/lock.h:13 [inline] lock_acquire+0x2de/0x410 kernel/locking/lockdep.c:4411 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:151 spin_lock include/linux/spinlock.h:338 [inline] shmem_fault+0x5ec/0x7b0 mm/shmem.c:2034 __do_fault+0x111/0x540 mm/memory.c:3083 do_shared_fault mm/memory.c:3535 [inline] do_fault mm/memory.c:3613 [inline] handle_pte_fault mm/memory.c:3840 [inline] __handle_mm_fault+0x2adf/0x3f20 mm/memory.c:3964 handle_mm_fault+0x1b5/0x6b0 mm/memory.c:4001 do_user_addr_fault arch/x86/mm/fault.c:1441 [inline] __do_page_fault+0x536/0xdd0 arch/x86/mm/fault.c:1506 do_page_fault+0x38/0x590 arch/x86/mm/fault.c:1530 page_fault+0x39/0x40 arch/x86/entry/entry_64.S:1202 It happens if the VMA got unmapped under us while we dropped mmap_sem and inode got freed. Pinning the file if we drop mmap_sem fixes the issue. Link: http://lkml.kernel.org/r/20190927083908.rhifa4mmaxefc24r@box Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: syzbot+03ee87124ee05af991bd@syzkaller.appspotmail.com Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Hillf Danton <hdanton@sina.com> Cc: Hugh Dickins <hughd@google.com> Cc: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 08:50:26 +07:00
struct file *fpin;
shmem: fix faulting into a hole, not taking i_mutex Commit f00cdc6df7d7 ("shmem: fix faulting into a hole while it's punched") was buggy: Sasha sent a lockdep report to remind us that grabbing i_mutex in the fault path is a no-no (write syscall may already hold i_mutex while faulting user buffer). We tried a completely different approach (see following patch) but that proved inadequate: good enough for a rational workload, but not good enough against trinity - which forks off so many mappings of the object that contention on i_mmap_mutex while hole-puncher holds i_mutex builds into serious starvation when concurrent faults force the puncher to fall back to single-page unmap_mapping_range() searches of the i_mmap tree. So return to the original umbrella approach, but keep away from i_mutex this time. We really don't want to bloat every shmem inode with a new mutex or completion, just to protect this unlikely case from trinity. So extend the original with wait_queue_head on stack at the hole-punch end, and wait_queue item on the stack at the fault end. This involves further use of i_lock to guard against the races: lockdep has been happy so far, and I see fs/inode.c:unlock_new_inode() holds i_lock around wake_up_bit(), which is comparable to what we do here. i_lock is more convenient, but we could switch to shmem's info->lock. This issue has been tagged with CVE-2014-4171, which will require commit f00cdc6df7d7 and this and the following patch to be backported: we suggest to 3.1+, though in fact the trinity forkbomb effect might go back as far as 2.6.16, when madvise(,,MADV_REMOVE) came in - or might not, since much has changed, with i_mmap_mutex a spinlock before 3.0. Anyone running trinity on 3.0 and earlier? I don't think we need care. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lukas Czerner <lczerner@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: <stable@vger.kernel.org> [3.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-24 04:00:10 +07:00
wait_queue_head_t *shmem_falloc_waitq;
shmem: fix shm fallocate() list corruption The shmem hole punching with fallocate(FALLOC_FL_PUNCH_HOLE) does not want to race with generating new pages by faulting them in. However, the wait-queue used to delay the page faulting has a serious problem: the wait queue head (in shmem_fallocate()) is allocated on the stack, and the code expects that "wake_up_all()" will make sure that all the queue entries are gone before the stack frame is de-allocated. And that is not at all necessarily the case. Yes, a normal wake-up sequence will remove the wait-queue entry that caused the wakeup (see "autoremove_wake_function()"), but the key wording there is "that caused the wakeup". When there are multiple possible wakeup sources, the wait queue entry may well stay around. And _particularly_ in a page fault path, we may be faulting in new pages from user space while we also have other things going on, and there may well be other pending wakeups. So despite the "wake_up_all()", it's not at all guaranteed that all list entries are removed from the wait queue head on the stack. Fix this by introducing a new wakeup function that removes the list entry unconditionally, even if the target process had already woken up for other reasons. Use that "synchronous" function to set up the waiters in shmem_fault(). This problem has never been seen in the wild afaik, but Dave Jones has reported it on and off while running trinity. We thought we fixed the stack corruption with the blk-mq rq_list locking fix (commit 7fe311302f7d: "blk-mq: update hardware and software queues for sleeping alloc"), but it turns out there was _another_ stack corruptor hiding in the trinity runs. Vegard Nossum (also running trinity) was able to trigger this one fairly consistently, and made us look once again at the shmem code due to the faults often being in that area. Reported-and-tested-by: Vegard Nossum <vegard.nossum@oracle.com>. Reported-by: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-06 03:10:29 +07:00
DEFINE_WAIT_FUNC(shmem_fault_wait, synchronous_wake_function);
shmem: fix faulting into a hole, not taking i_mutex Commit f00cdc6df7d7 ("shmem: fix faulting into a hole while it's punched") was buggy: Sasha sent a lockdep report to remind us that grabbing i_mutex in the fault path is a no-no (write syscall may already hold i_mutex while faulting user buffer). We tried a completely different approach (see following patch) but that proved inadequate: good enough for a rational workload, but not good enough against trinity - which forks off so many mappings of the object that contention on i_mmap_mutex while hole-puncher holds i_mutex builds into serious starvation when concurrent faults force the puncher to fall back to single-page unmap_mapping_range() searches of the i_mmap tree. So return to the original umbrella approach, but keep away from i_mutex this time. We really don't want to bloat every shmem inode with a new mutex or completion, just to protect this unlikely case from trinity. So extend the original with wait_queue_head on stack at the hole-punch end, and wait_queue item on the stack at the fault end. This involves further use of i_lock to guard against the races: lockdep has been happy so far, and I see fs/inode.c:unlock_new_inode() holds i_lock around wake_up_bit(), which is comparable to what we do here. i_lock is more convenient, but we could switch to shmem's info->lock. This issue has been tagged with CVE-2014-4171, which will require commit f00cdc6df7d7 and this and the following patch to be backported: we suggest to 3.1+, though in fact the trinity forkbomb effect might go back as far as 2.6.16, when madvise(,,MADV_REMOVE) came in - or might not, since much has changed, with i_mmap_mutex a spinlock before 3.0. Anyone running trinity on 3.0 and earlier? I don't think we need care. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lukas Czerner <lczerner@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: <stable@vger.kernel.org> [3.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-24 04:00:10 +07:00
ret = VM_FAULT_NOPAGE;
shmem: pin the file in shmem_fault() if mmap_sem is dropped syzbot found the following crash: BUG: KASAN: use-after-free in perf_trace_lock_acquire+0x401/0x530 include/trace/events/lock.h:13 Read of size 8 at addr ffff8880a5cf2c50 by task syz-executor.0/26173 CPU: 0 PID: 26173 Comm: syz-executor.0 Not tainted 5.3.0-rc6 #146 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: perf_trace_lock_acquire+0x401/0x530 include/trace/events/lock.h:13 trace_lock_acquire include/trace/events/lock.h:13 [inline] lock_acquire+0x2de/0x410 kernel/locking/lockdep.c:4411 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:151 spin_lock include/linux/spinlock.h:338 [inline] shmem_fault+0x5ec/0x7b0 mm/shmem.c:2034 __do_fault+0x111/0x540 mm/memory.c:3083 do_shared_fault mm/memory.c:3535 [inline] do_fault mm/memory.c:3613 [inline] handle_pte_fault mm/memory.c:3840 [inline] __handle_mm_fault+0x2adf/0x3f20 mm/memory.c:3964 handle_mm_fault+0x1b5/0x6b0 mm/memory.c:4001 do_user_addr_fault arch/x86/mm/fault.c:1441 [inline] __do_page_fault+0x536/0xdd0 arch/x86/mm/fault.c:1506 do_page_fault+0x38/0x590 arch/x86/mm/fault.c:1530 page_fault+0x39/0x40 arch/x86/entry/entry_64.S:1202 It happens if the VMA got unmapped under us while we dropped mmap_sem and inode got freed. Pinning the file if we drop mmap_sem fixes the issue. Link: http://lkml.kernel.org/r/20190927083908.rhifa4mmaxefc24r@box Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: syzbot+03ee87124ee05af991bd@syzkaller.appspotmail.com Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Hillf Danton <hdanton@sina.com> Cc: Hugh Dickins <hughd@google.com> Cc: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 08:50:26 +07:00
fpin = maybe_unlock_mmap_for_io(vmf, NULL);
if (fpin)
shmem: fix faulting into a hole, not taking i_mutex Commit f00cdc6df7d7 ("shmem: fix faulting into a hole while it's punched") was buggy: Sasha sent a lockdep report to remind us that grabbing i_mutex in the fault path is a no-no (write syscall may already hold i_mutex while faulting user buffer). We tried a completely different approach (see following patch) but that proved inadequate: good enough for a rational workload, but not good enough against trinity - which forks off so many mappings of the object that contention on i_mmap_mutex while hole-puncher holds i_mutex builds into serious starvation when concurrent faults force the puncher to fall back to single-page unmap_mapping_range() searches of the i_mmap tree. So return to the original umbrella approach, but keep away from i_mutex this time. We really don't want to bloat every shmem inode with a new mutex or completion, just to protect this unlikely case from trinity. So extend the original with wait_queue_head on stack at the hole-punch end, and wait_queue item on the stack at the fault end. This involves further use of i_lock to guard against the races: lockdep has been happy so far, and I see fs/inode.c:unlock_new_inode() holds i_lock around wake_up_bit(), which is comparable to what we do here. i_lock is more convenient, but we could switch to shmem's info->lock. This issue has been tagged with CVE-2014-4171, which will require commit f00cdc6df7d7 and this and the following patch to be backported: we suggest to 3.1+, though in fact the trinity forkbomb effect might go back as far as 2.6.16, when madvise(,,MADV_REMOVE) came in - or might not, since much has changed, with i_mmap_mutex a spinlock before 3.0. Anyone running trinity on 3.0 and earlier? I don't think we need care. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lukas Czerner <lczerner@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: <stable@vger.kernel.org> [3.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-24 04:00:10 +07:00
ret = VM_FAULT_RETRY;
shmem_falloc_waitq = shmem_falloc->waitq;
prepare_to_wait(shmem_falloc_waitq, &shmem_fault_wait,
TASK_UNINTERRUPTIBLE);
spin_unlock(&inode->i_lock);
schedule();
/*
* shmem_falloc_waitq points into the shmem_fallocate()
* stack of the hole-punching task: shmem_falloc_waitq
* is usually invalid by the time we reach here, but
* finish_wait() does not dereference it in that case;
* though i_lock needed lest racing with wake_up_all().
*/
spin_lock(&inode->i_lock);
finish_wait(shmem_falloc_waitq, &shmem_fault_wait);
spin_unlock(&inode->i_lock);
shmem: pin the file in shmem_fault() if mmap_sem is dropped syzbot found the following crash: BUG: KASAN: use-after-free in perf_trace_lock_acquire+0x401/0x530 include/trace/events/lock.h:13 Read of size 8 at addr ffff8880a5cf2c50 by task syz-executor.0/26173 CPU: 0 PID: 26173 Comm: syz-executor.0 Not tainted 5.3.0-rc6 #146 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: perf_trace_lock_acquire+0x401/0x530 include/trace/events/lock.h:13 trace_lock_acquire include/trace/events/lock.h:13 [inline] lock_acquire+0x2de/0x410 kernel/locking/lockdep.c:4411 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:151 spin_lock include/linux/spinlock.h:338 [inline] shmem_fault+0x5ec/0x7b0 mm/shmem.c:2034 __do_fault+0x111/0x540 mm/memory.c:3083 do_shared_fault mm/memory.c:3535 [inline] do_fault mm/memory.c:3613 [inline] handle_pte_fault mm/memory.c:3840 [inline] __handle_mm_fault+0x2adf/0x3f20 mm/memory.c:3964 handle_mm_fault+0x1b5/0x6b0 mm/memory.c:4001 do_user_addr_fault arch/x86/mm/fault.c:1441 [inline] __do_page_fault+0x536/0xdd0 arch/x86/mm/fault.c:1506 do_page_fault+0x38/0x590 arch/x86/mm/fault.c:1530 page_fault+0x39/0x40 arch/x86/entry/entry_64.S:1202 It happens if the VMA got unmapped under us while we dropped mmap_sem and inode got freed. Pinning the file if we drop mmap_sem fixes the issue. Link: http://lkml.kernel.org/r/20190927083908.rhifa4mmaxefc24r@box Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: syzbot+03ee87124ee05af991bd@syzkaller.appspotmail.com Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Hillf Danton <hdanton@sina.com> Cc: Hugh Dickins <hughd@google.com> Cc: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 08:50:26 +07:00
if (fpin)
fput(fpin);
shmem: fix faulting into a hole, not taking i_mutex Commit f00cdc6df7d7 ("shmem: fix faulting into a hole while it's punched") was buggy: Sasha sent a lockdep report to remind us that grabbing i_mutex in the fault path is a no-no (write syscall may already hold i_mutex while faulting user buffer). We tried a completely different approach (see following patch) but that proved inadequate: good enough for a rational workload, but not good enough against trinity - which forks off so many mappings of the object that contention on i_mmap_mutex while hole-puncher holds i_mutex builds into serious starvation when concurrent faults force the puncher to fall back to single-page unmap_mapping_range() searches of the i_mmap tree. So return to the original umbrella approach, but keep away from i_mutex this time. We really don't want to bloat every shmem inode with a new mutex or completion, just to protect this unlikely case from trinity. So extend the original with wait_queue_head on stack at the hole-punch end, and wait_queue item on the stack at the fault end. This involves further use of i_lock to guard against the races: lockdep has been happy so far, and I see fs/inode.c:unlock_new_inode() holds i_lock around wake_up_bit(), which is comparable to what we do here. i_lock is more convenient, but we could switch to shmem's info->lock. This issue has been tagged with CVE-2014-4171, which will require commit f00cdc6df7d7 and this and the following patch to be backported: we suggest to 3.1+, though in fact the trinity forkbomb effect might go back as far as 2.6.16, when madvise(,,MADV_REMOVE) came in - or might not, since much has changed, with i_mmap_mutex a spinlock before 3.0. Anyone running trinity on 3.0 and earlier? I don't think we need care. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lukas Czerner <lczerner@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: <stable@vger.kernel.org> [3.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-24 04:00:10 +07:00
return ret;
}
shmem: fix faulting into a hole, not taking i_mutex Commit f00cdc6df7d7 ("shmem: fix faulting into a hole while it's punched") was buggy: Sasha sent a lockdep report to remind us that grabbing i_mutex in the fault path is a no-no (write syscall may already hold i_mutex while faulting user buffer). We tried a completely different approach (see following patch) but that proved inadequate: good enough for a rational workload, but not good enough against trinity - which forks off so many mappings of the object that contention on i_mmap_mutex while hole-puncher holds i_mutex builds into serious starvation when concurrent faults force the puncher to fall back to single-page unmap_mapping_range() searches of the i_mmap tree. So return to the original umbrella approach, but keep away from i_mutex this time. We really don't want to bloat every shmem inode with a new mutex or completion, just to protect this unlikely case from trinity. So extend the original with wait_queue_head on stack at the hole-punch end, and wait_queue item on the stack at the fault end. This involves further use of i_lock to guard against the races: lockdep has been happy so far, and I see fs/inode.c:unlock_new_inode() holds i_lock around wake_up_bit(), which is comparable to what we do here. i_lock is more convenient, but we could switch to shmem's info->lock. This issue has been tagged with CVE-2014-4171, which will require commit f00cdc6df7d7 and this and the following patch to be backported: we suggest to 3.1+, though in fact the trinity forkbomb effect might go back as far as 2.6.16, when madvise(,,MADV_REMOVE) came in - or might not, since much has changed, with i_mmap_mutex a spinlock before 3.0. Anyone running trinity on 3.0 and earlier? I don't think we need care. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lukas Czerner <lczerner@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: <stable@vger.kernel.org> [3.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-24 04:00:10 +07:00
spin_unlock(&inode->i_lock);
}
sgp = SGP_CACHE;
mm: make PR_SET_THP_DISABLE immediately active PR_SET_THP_DISABLE has a rather subtle semantic. It doesn't affect any existing mapping because it only updated mm->def_flags which is a template for new mappings. The mappings created after prctl(PR_SET_THP_DISABLE) have VM_NOHUGEPAGE flag set. This can be quite surprising for all those applications which do not do prctl(); fork() & exec() and want to control their own THP behavior. Another usecase when the immediate semantic of the prctl might be useful is a combination of pre- and post-copy migration of containers with CRIU. In this case CRIU populates a part of a memory region with data that was saved during the pre-copy stage. Afterwards, the region is registered with userfaultfd and CRIU expects to get page faults for the parts of the region that were not yet populated. However, khugepaged collapses the pages and the expected page faults do not occur. In more general case, the prctl(PR_SET_THP_DISABLE) could be used as a temporary mechanism for enabling/disabling THP process wide. Implementation wise, a new MMF_DISABLE_THP flag is added. This flag is tested when decision whether to use huge pages is taken either during page fault of at the time of THP collapse. It should be noted, that the new implementation makes PR_SET_THP_DISABLE master override to any per-VMA setting, which was not the case previously. Fixes: a0715cc22601 ("mm, thp: add VM_INIT_DEF_MASK and PRCTL_THP_DISABLE") Link: http://lkml.kernel.org/r/1496415802-30944-1-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-11 05:48:02 +07:00
if ((vma->vm_flags & VM_NOHUGEPAGE) ||
test_bit(MMF_DISABLE_THP, &vma->vm_mm->flags))
sgp = SGP_NOHUGE;
mm: make PR_SET_THP_DISABLE immediately active PR_SET_THP_DISABLE has a rather subtle semantic. It doesn't affect any existing mapping because it only updated mm->def_flags which is a template for new mappings. The mappings created after prctl(PR_SET_THP_DISABLE) have VM_NOHUGEPAGE flag set. This can be quite surprising for all those applications which do not do prctl(); fork() & exec() and want to control their own THP behavior. Another usecase when the immediate semantic of the prctl might be useful is a combination of pre- and post-copy migration of containers with CRIU. In this case CRIU populates a part of a memory region with data that was saved during the pre-copy stage. Afterwards, the region is registered with userfaultfd and CRIU expects to get page faults for the parts of the region that were not yet populated. However, khugepaged collapses the pages and the expected page faults do not occur. In more general case, the prctl(PR_SET_THP_DISABLE) could be used as a temporary mechanism for enabling/disabling THP process wide. Implementation wise, a new MMF_DISABLE_THP flag is added. This flag is tested when decision whether to use huge pages is taken either during page fault of at the time of THP collapse. It should be noted, that the new implementation makes PR_SET_THP_DISABLE master override to any per-VMA setting, which was not the case previously. Fixes: a0715cc22601 ("mm, thp: add VM_INIT_DEF_MASK and PRCTL_THP_DISABLE") Link: http://lkml.kernel.org/r/1496415802-30944-1-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-11 05:48:02 +07:00
else if (vma->vm_flags & VM_HUGEPAGE)
sgp = SGP_HUGE;
err = shmem_getpage_gfp(inode, vmf->pgoff, &vmf->page, sgp,
gfp, vma, vmf, &ret);
if (err)
return vmf_error(err);
return ret;
}
unsigned long shmem_get_unmapped_area(struct file *file,
unsigned long uaddr, unsigned long len,
unsigned long pgoff, unsigned long flags)
{
unsigned long (*get_area)(struct file *,
unsigned long, unsigned long, unsigned long, unsigned long);
unsigned long addr;
unsigned long offset;
unsigned long inflated_len;
unsigned long inflated_addr;
unsigned long inflated_offset;
if (len > TASK_SIZE)
return -ENOMEM;
get_area = current->mm->get_unmapped_area;
addr = get_area(file, uaddr, len, pgoff, flags);
if (!IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE))
return addr;
if (IS_ERR_VALUE(addr))
return addr;
if (addr & ~PAGE_MASK)
return addr;
if (addr > TASK_SIZE - len)
return addr;
if (shmem_huge == SHMEM_HUGE_DENY)
return addr;
if (len < HPAGE_PMD_SIZE)
return addr;
if (flags & MAP_FIXED)
return addr;
/*
* Our priority is to support MAP_SHARED mapped hugely;
* and support MAP_PRIVATE mapped hugely too, until it is COWed.
mm/shmem.c: thp, shmem: fix conflict of above-47bit hint address and PMD alignment Shmem/tmpfs tries to provide THP-friendly mappings if huge pages are enabled. But it doesn't work well with above-47bit hint address. Normally, the kernel doesn't create userspace mappings above 47-bit, even if the machine allows this (such as with 5-level paging on x86-64). Not all user space is ready to handle wide addresses. It's known that at least some JIT compilers use higher bits in pointers to encode their information. Userspace can ask for allocation from full address space by specifying hint address (with or without MAP_FIXED) above 47-bits. If the application doesn't need a particular address, but wants to allocate from whole address space it can specify -1 as a hint address. Unfortunately, this trick breaks THP alignment in shmem/tmp: shmem_get_unmapped_area() would not try to allocate PMD-aligned area if *any* hint address specified. This can be fixed by requesting the aligned area if the we failed to allocated at user-specified hint address. The request with inflated length will also take the user-specified hint address. This way we will not lose an allocation request from the full address space. [kirill@shutemov.name: fold in a fixup] Link: http://lkml.kernel.org/r/20191223231309.t6bh5hkbmokihpfu@box Link: http://lkml.kernel.org/r/20191220142548.7118-3-kirill.shutemov@linux.intel.com Fixes: b569bab78d8d ("x86/mm: Prepare to expose larger address space to userspace") Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "Willhalm, Thomas" <thomas.willhalm@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "Bruggeman, Otto G" <otto.g.bruggeman@intel.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-14 07:29:13 +07:00
* But if caller specified an address hint and we allocated area there
* successfully, respect that as before.
*/
mm/shmem.c: thp, shmem: fix conflict of above-47bit hint address and PMD alignment Shmem/tmpfs tries to provide THP-friendly mappings if huge pages are enabled. But it doesn't work well with above-47bit hint address. Normally, the kernel doesn't create userspace mappings above 47-bit, even if the machine allows this (such as with 5-level paging on x86-64). Not all user space is ready to handle wide addresses. It's known that at least some JIT compilers use higher bits in pointers to encode their information. Userspace can ask for allocation from full address space by specifying hint address (with or without MAP_FIXED) above 47-bits. If the application doesn't need a particular address, but wants to allocate from whole address space it can specify -1 as a hint address. Unfortunately, this trick breaks THP alignment in shmem/tmp: shmem_get_unmapped_area() would not try to allocate PMD-aligned area if *any* hint address specified. This can be fixed by requesting the aligned area if the we failed to allocated at user-specified hint address. The request with inflated length will also take the user-specified hint address. This way we will not lose an allocation request from the full address space. [kirill@shutemov.name: fold in a fixup] Link: http://lkml.kernel.org/r/20191223231309.t6bh5hkbmokihpfu@box Link: http://lkml.kernel.org/r/20191220142548.7118-3-kirill.shutemov@linux.intel.com Fixes: b569bab78d8d ("x86/mm: Prepare to expose larger address space to userspace") Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "Willhalm, Thomas" <thomas.willhalm@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "Bruggeman, Otto G" <otto.g.bruggeman@intel.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-14 07:29:13 +07:00
if (uaddr == addr)
return addr;
if (shmem_huge != SHMEM_HUGE_FORCE) {
struct super_block *sb;
if (file) {
VM_BUG_ON(file->f_op != &shmem_file_operations);
sb = file_inode(file)->i_sb;
} else {
/*
* Called directly from mm/mmap.c, or drivers/char/mem.c
* for "/dev/zero", to create a shared anonymous object.
*/
if (IS_ERR(shm_mnt))
return addr;
sb = shm_mnt->mnt_sb;
}
if (SHMEM_SB(sb)->huge == SHMEM_HUGE_NEVER)
return addr;
}
offset = (pgoff << PAGE_SHIFT) & (HPAGE_PMD_SIZE-1);
if (offset && offset + len < 2 * HPAGE_PMD_SIZE)
return addr;
if ((addr & (HPAGE_PMD_SIZE-1)) == offset)
return addr;
inflated_len = len + HPAGE_PMD_SIZE - PAGE_SIZE;
if (inflated_len > TASK_SIZE)
return addr;
if (inflated_len < len)
return addr;
mm/shmem.c: thp, shmem: fix conflict of above-47bit hint address and PMD alignment Shmem/tmpfs tries to provide THP-friendly mappings if huge pages are enabled. But it doesn't work well with above-47bit hint address. Normally, the kernel doesn't create userspace mappings above 47-bit, even if the machine allows this (such as with 5-level paging on x86-64). Not all user space is ready to handle wide addresses. It's known that at least some JIT compilers use higher bits in pointers to encode their information. Userspace can ask for allocation from full address space by specifying hint address (with or without MAP_FIXED) above 47-bits. If the application doesn't need a particular address, but wants to allocate from whole address space it can specify -1 as a hint address. Unfortunately, this trick breaks THP alignment in shmem/tmp: shmem_get_unmapped_area() would not try to allocate PMD-aligned area if *any* hint address specified. This can be fixed by requesting the aligned area if the we failed to allocated at user-specified hint address. The request with inflated length will also take the user-specified hint address. This way we will not lose an allocation request from the full address space. [kirill@shutemov.name: fold in a fixup] Link: http://lkml.kernel.org/r/20191223231309.t6bh5hkbmokihpfu@box Link: http://lkml.kernel.org/r/20191220142548.7118-3-kirill.shutemov@linux.intel.com Fixes: b569bab78d8d ("x86/mm: Prepare to expose larger address space to userspace") Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "Willhalm, Thomas" <thomas.willhalm@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "Bruggeman, Otto G" <otto.g.bruggeman@intel.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-14 07:29:13 +07:00
inflated_addr = get_area(NULL, uaddr, inflated_len, 0, flags);
if (IS_ERR_VALUE(inflated_addr))
return addr;
if (inflated_addr & ~PAGE_MASK)
return addr;
inflated_offset = inflated_addr & (HPAGE_PMD_SIZE-1);
inflated_addr += offset - inflated_offset;
if (inflated_offset > offset)
inflated_addr += HPAGE_PMD_SIZE;
if (inflated_addr > TASK_SIZE - len)
return addr;
return inflated_addr;
}
#ifdef CONFIG_NUMA
static int shmem_set_policy(struct vm_area_struct *vma, struct mempolicy *mpol)
{
struct inode *inode = file_inode(vma->vm_file);
return mpol_set_shared_policy(&SHMEM_I(inode)->policy, vma, mpol);
}
static struct mempolicy *shmem_get_policy(struct vm_area_struct *vma,
unsigned long addr)
{
struct inode *inode = file_inode(vma->vm_file);
pgoff_t index;
index = ((addr - vma->vm_start) >> PAGE_SHIFT) + vma->vm_pgoff;
return mpol_shared_policy_lookup(&SHMEM_I(inode)->policy, index);
}
#endif
int shmem_lock(struct file *file, int lock, struct user_struct *user)
{
struct inode *inode = file_inode(file);
struct shmem_inode_info *info = SHMEM_I(inode);
int retval = -ENOMEM;
shmem: fix possible deadlocks on shmlock_user_lock Recent commit 71725ed10c40 ("mm: huge tmpfs: try to split_huge_page() when punching hole") has allowed syzkaller to probe deeper, uncovering a long-standing lockdep issue between the irq-unsafe shmlock_user_lock, the irq-safe xa_lock on mapping->i_pages, and shmem inode's info->lock which nests inside xa_lock (or tree_lock) since 4.8's shmem_uncharge(). user_shm_lock(), servicing SysV shmctl(SHM_LOCK), wants shmlock_user_lock while its caller shmem_lock() holds info->lock with interrupts disabled; but hugetlbfs_file_setup() calls user_shm_lock() with interrupts enabled, and might be interrupted by a writeback endio wanting xa_lock on i_pages. This may not risk an actual deadlock, since shmem inodes do not take part in writeback accounting, but there are several easy ways to avoid it. Requiring interrupts disabled for shmlock_user_lock would be easy, but it's a high-level global lock for which that seems inappropriate. Instead, recall that the use of info->lock to guard info->flags in shmem_lock() dates from pre-3.1 days, when races with SHMEM_PAGEIN and SHMEM_TRUNCATE could occur: nowadays it serves no purpose, the only flag added or removed is VM_LOCKED itself, and calls to shmem_lock() an inode are already serialized by the caller. Take info->lock out of the chain and the possibility of deadlock or lockdep warning goes away. Fixes: 4595ef88d136 ("shmem: make shmem_inode_info::lock irq-safe") Reported-by: syzbot+c8a8197c8852f566b9d9@syzkaller.appspotmail.com Reported-by: syzbot+40b71e145e73f78f81ad@syzkaller.appspotmail.com Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Yang Shi <yang.shi@linux.alibaba.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2004161707410.16322@eggly.anvils Link: https://lore.kernel.org/lkml/000000000000e5838c05a3152f53@google.com/ Link: https://lore.kernel.org/lkml/0000000000003712b305a331d3b1@google.com/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-21 08:14:14 +07:00
/*
* What serializes the accesses to info->flags?
* ipc_lock_object() when called from shmctl_do_lock(),
* no serialization needed when called from shm_destroy().
*/
if (lock && !(info->flags & VM_LOCKED)) {
if (!user_shm_lock(inode->i_size, user))
goto out_nomem;
info->flags |= VM_LOCKED;
mapping_set_unevictable(file->f_mapping);
}
if (!lock && (info->flags & VM_LOCKED) && user) {
user_shm_unlock(inode->i_size, user);
info->flags &= ~VM_LOCKED;
mapping_clear_unevictable(file->f_mapping);
}
retval = 0;
out_nomem:
return retval;
}
static int shmem_mmap(struct file *file, struct vm_area_struct *vma)
{
mm/memfd: add an F_SEAL_FUTURE_WRITE seal to memfd Android uses ashmem for sharing memory regions. We are looking forward to migrating all usecases of ashmem to memfd so that we can possibly remove the ashmem driver in the future from staging while also benefiting from using memfd and contributing to it. Note staging drivers are also not ABI and generally can be removed at anytime. One of the main usecases Android has is the ability to create a region and mmap it as writeable, then add protection against making any "future" writes while keeping the existing already mmap'ed writeable-region active. This allows us to implement a usecase where receivers of the shared memory buffer can get a read-only view, while the sender continues to write to the buffer. See CursorWindow documentation in Android for more details: https://developer.android.com/reference/android/database/CursorWindow This usecase cannot be implemented with the existing F_SEAL_WRITE seal. To support the usecase, this patch adds a new F_SEAL_FUTURE_WRITE seal which prevents any future mmap and write syscalls from succeeding while keeping the existing mmap active. A better way to do F_SEAL_FUTURE_WRITE seal was discussed [1] last week where we don't need to modify core VFS structures to get the same behavior of the seal. This solves several side-effects pointed by Andy. self-tests are provided in later patch to verify the expected semantics. [1] https://lore.kernel.org/lkml/20181111173650.GA256781@google.com/ Thanks a lot to Andy for suggestions to improve code. Link: http://lkml.kernel.org/r/20190112203816.85534-2-joel@joelfernandes.org Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Acked-by: John Stultz <john.stultz@linaro.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: J. Bruce Fields <bfields@fieldses.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Marc-Andr Lureau <marcandre.lureau@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:54 +07:00
struct shmem_inode_info *info = SHMEM_I(file_inode(file));
if (info->seals & F_SEAL_FUTURE_WRITE) {
/*
* New PROT_WRITE and MAP_SHARED mmaps are not allowed when
* "future write" seal active.
*/
if ((vma->vm_flags & VM_SHARED) && (vma->vm_flags & VM_WRITE))
return -EPERM;
/*
mm, memfd: fix COW issue on MAP_PRIVATE and F_SEAL_FUTURE_WRITE mappings F_SEAL_FUTURE_WRITE has unexpected behavior when used with MAP_PRIVATE: A private mapping created after the memfd file that gets sealed with F_SEAL_FUTURE_WRITE loses the copy-on-write at fork behavior, meaning children and parent share the same memory, even though the mapping is private. The reason for this is due to the code below: static int shmem_mmap(struct file *file, struct vm_area_struct *vma) { struct shmem_inode_info *info = SHMEM_I(file_inode(file)); if (info->seals & F_SEAL_FUTURE_WRITE) { /* * New PROT_WRITE and MAP_SHARED mmaps are not allowed when * "future write" seal active. */ if ((vma->vm_flags & VM_SHARED) && (vma->vm_flags & VM_WRITE)) return -EPERM; /* * Since the F_SEAL_FUTURE_WRITE seals allow for a MAP_SHARED * read-only mapping, take care to not allow mprotect to revert * protections. */ vma->vm_flags &= ~(VM_MAYWRITE); } ... } And for the mm to know if a mapping is copy-on-write: static inline bool is_cow_mapping(vm_flags_t flags) { return (flags & (VM_SHARED | VM_MAYWRITE)) == VM_MAYWRITE; } The patch fixes the issue by making the mprotect revert protection happen only for shared mappings. For private mappings, using mprotect will have no effect on the seal behavior. The F_SEAL_FUTURE_WRITE feature was introduced in v5.1 so v5.3.x stable kernels would need a backport. [akpm@linux-foundation.org: reflow comment, per Christoph] Link: http://lkml.kernel.org/r/20191107195355.80608-1-joel@joelfernandes.org Fixes: ab3948f58ff84 ("mm/memfd: add an F_SEAL_FUTURE_WRITE seal to memfd") Signed-off-by: Nicolas Geoffray <ngeoffray@google.com> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 08:53:28 +07:00
* Since an F_SEAL_FUTURE_WRITE sealed memfd can be mapped as
* MAP_SHARED and read-only, take care to not allow mprotect to
* revert protections on such mappings. Do this only for shared
* mappings. For private mappings, don't need to mask
* VM_MAYWRITE as we still want them to be COW-writable.
mm/memfd: add an F_SEAL_FUTURE_WRITE seal to memfd Android uses ashmem for sharing memory regions. We are looking forward to migrating all usecases of ashmem to memfd so that we can possibly remove the ashmem driver in the future from staging while also benefiting from using memfd and contributing to it. Note staging drivers are also not ABI and generally can be removed at anytime. One of the main usecases Android has is the ability to create a region and mmap it as writeable, then add protection against making any "future" writes while keeping the existing already mmap'ed writeable-region active. This allows us to implement a usecase where receivers of the shared memory buffer can get a read-only view, while the sender continues to write to the buffer. See CursorWindow documentation in Android for more details: https://developer.android.com/reference/android/database/CursorWindow This usecase cannot be implemented with the existing F_SEAL_WRITE seal. To support the usecase, this patch adds a new F_SEAL_FUTURE_WRITE seal which prevents any future mmap and write syscalls from succeeding while keeping the existing mmap active. A better way to do F_SEAL_FUTURE_WRITE seal was discussed [1] last week where we don't need to modify core VFS structures to get the same behavior of the seal. This solves several side-effects pointed by Andy. self-tests are provided in later patch to verify the expected semantics. [1] https://lore.kernel.org/lkml/20181111173650.GA256781@google.com/ Thanks a lot to Andy for suggestions to improve code. Link: http://lkml.kernel.org/r/20190112203816.85534-2-joel@joelfernandes.org Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Acked-by: John Stultz <john.stultz@linaro.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: J. Bruce Fields <bfields@fieldses.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Marc-Andr Lureau <marcandre.lureau@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:54 +07:00
*/
mm, memfd: fix COW issue on MAP_PRIVATE and F_SEAL_FUTURE_WRITE mappings F_SEAL_FUTURE_WRITE has unexpected behavior when used with MAP_PRIVATE: A private mapping created after the memfd file that gets sealed with F_SEAL_FUTURE_WRITE loses the copy-on-write at fork behavior, meaning children and parent share the same memory, even though the mapping is private. The reason for this is due to the code below: static int shmem_mmap(struct file *file, struct vm_area_struct *vma) { struct shmem_inode_info *info = SHMEM_I(file_inode(file)); if (info->seals & F_SEAL_FUTURE_WRITE) { /* * New PROT_WRITE and MAP_SHARED mmaps are not allowed when * "future write" seal active. */ if ((vma->vm_flags & VM_SHARED) && (vma->vm_flags & VM_WRITE)) return -EPERM; /* * Since the F_SEAL_FUTURE_WRITE seals allow for a MAP_SHARED * read-only mapping, take care to not allow mprotect to revert * protections. */ vma->vm_flags &= ~(VM_MAYWRITE); } ... } And for the mm to know if a mapping is copy-on-write: static inline bool is_cow_mapping(vm_flags_t flags) { return (flags & (VM_SHARED | VM_MAYWRITE)) == VM_MAYWRITE; } The patch fixes the issue by making the mprotect revert protection happen only for shared mappings. For private mappings, using mprotect will have no effect on the seal behavior. The F_SEAL_FUTURE_WRITE feature was introduced in v5.1 so v5.3.x stable kernels would need a backport. [akpm@linux-foundation.org: reflow comment, per Christoph] Link: http://lkml.kernel.org/r/20191107195355.80608-1-joel@joelfernandes.org Fixes: ab3948f58ff84 ("mm/memfd: add an F_SEAL_FUTURE_WRITE seal to memfd") Signed-off-by: Nicolas Geoffray <ngeoffray@google.com> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Hugh Dickins <hughd@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 08:53:28 +07:00
if (vma->vm_flags & VM_SHARED)
vma->vm_flags &= ~(VM_MAYWRITE);
mm/memfd: add an F_SEAL_FUTURE_WRITE seal to memfd Android uses ashmem for sharing memory regions. We are looking forward to migrating all usecases of ashmem to memfd so that we can possibly remove the ashmem driver in the future from staging while also benefiting from using memfd and contributing to it. Note staging drivers are also not ABI and generally can be removed at anytime. One of the main usecases Android has is the ability to create a region and mmap it as writeable, then add protection against making any "future" writes while keeping the existing already mmap'ed writeable-region active. This allows us to implement a usecase where receivers of the shared memory buffer can get a read-only view, while the sender continues to write to the buffer. See CursorWindow documentation in Android for more details: https://developer.android.com/reference/android/database/CursorWindow This usecase cannot be implemented with the existing F_SEAL_WRITE seal. To support the usecase, this patch adds a new F_SEAL_FUTURE_WRITE seal which prevents any future mmap and write syscalls from succeeding while keeping the existing mmap active. A better way to do F_SEAL_FUTURE_WRITE seal was discussed [1] last week where we don't need to modify core VFS structures to get the same behavior of the seal. This solves several side-effects pointed by Andy. self-tests are provided in later patch to verify the expected semantics. [1] https://lore.kernel.org/lkml/20181111173650.GA256781@google.com/ Thanks a lot to Andy for suggestions to improve code. Link: http://lkml.kernel.org/r/20190112203816.85534-2-joel@joelfernandes.org Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Acked-by: John Stultz <john.stultz@linaro.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: J. Bruce Fields <bfields@fieldses.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Marc-Andr Lureau <marcandre.lureau@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:54 +07:00
}
file_accessed(file);
vma->vm_ops = &shmem_vm_ops;
if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE) &&
khugepaged: add support of collapse for tmpfs/shmem pages This patch extends khugepaged to support collapse of tmpfs/shmem pages. We share fair amount of infrastructure with anon-THP collapse. Few design points: - First we are looking for VMA which can be suitable for mapping huge page; - If the VMA maps shmem file, the rest scan/collapse operations operates on page cache, not on page tables as in anon VMA case. - khugepaged_scan_shmem() finds a range which is suitable for huge page. The scan is lockless and shouldn't disturb system too much. - once the candidate for collapse is found, collapse_shmem() attempts to create a huge page: + scan over radix tree, making the range point to new huge page; + new huge page is not-uptodate, locked and freezed (refcount is 0), so nobody can touch them until we say so. + we swap in pages during the scan. khugepaged_scan_shmem() filters out ranges with more than khugepaged_max_ptes_swap swapped out pages. It's HPAGE_PMD_NR/8 by default. + old pages are isolated, unmapped and put to local list in case to be restored back if collapse failed. - if collapse succeed, we retract pte page tables from VMAs where huge pages mapping is possible. The huge page will be mapped as PMD on next minor fault into the range. Link: http://lkml.kernel.org/r/1466021202-61880-35-git-send-email-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 05:26:32 +07:00
((vma->vm_start + ~HPAGE_PMD_MASK) & HPAGE_PMD_MASK) <
(vma->vm_end & HPAGE_PMD_MASK)) {
khugepaged_enter(vma, vma->vm_flags);
}
return 0;
}
static struct inode *shmem_get_inode(struct super_block *sb, const struct inode *dir,
umode_t mode, dev_t dev, unsigned long flags)
{
struct inode *inode;
struct shmem_inode_info *info;
struct shmem_sb_info *sbinfo = SHMEM_SB(sb);
tmpfs: per-superblock i_ino support Patch series "tmpfs: inode: Reduce risk of inum overflow", v7. In Facebook production we are seeing heavy i_ino wraparounds on tmpfs. On affected tiers, in excess of 10% of hosts show multiple files with different content and the same inode number, with some servers even having as many as 150 duplicated inode numbers with differing file content. This causes actual, tangible problems in production. For example, we have complaints from those working on remote caches that their application is reporting cache corruptions because it uses (device, inodenum) to establish the identity of a particular cache object, but because it's not unique any more, the application refuses to continue and reports cache corruption. Even worse, sometimes applications may not even detect the corruption but may continue anyway, causing phantom and hard to debug behaviour. In general, userspace applications expect that (device, inodenum) should be enough to be uniquely point to one inode, which seems fair enough. One might also need to check the generation, but in this case: 1. That's not currently exposed to userspace (ioctl(...FS_IOC_GETVERSION...) returns ENOTTY on tmpfs); 2. Even with generation, there shouldn't be two live inodes with the same inode number on one device. In order to mitigate this, we take a two-pronged approach: 1. Moving inum generation from being global to per-sb for tmpfs. This itself allows some reduction in i_ino churn. This works on both 64- and 32- bit machines. 2. Adding inode{64,32} for tmpfs. This fix is supported on machines with 64-bit ino_t only: we allow users to mount tmpfs with a new inode64 option that uses the full width of ino_t, or CONFIG_TMPFS_INODE64. You can see how this compares to previous related patches which didn't implement this per-superblock: - https://patchwork.kernel.org/patch/11254001/ - https://patchwork.kernel.org/patch/11023915/ This patch (of 2): get_next_ino has a number of problems: - It uses and returns a uint, which is susceptible to become overflowed if a lot of volatile inodes that use get_next_ino are created. - It's global, with no specificity per-sb or even per-filesystem. This means it's not that difficult to cause inode number wraparounds on a single device, which can result in having multiple distinct inodes with the same inode number. This patch adds a per-superblock counter that mitigates the second case. This design also allows us to later have a specific i_ino size per-device, for example, allowing users to choose whether to use 32- or 64-bit inodes for each tmpfs mount. This is implemented in the next commit. For internal shmem mounts which may be less tolerant to spinlock delays, we implement a percpu batching scheme which only takes the stat_lock at each batch boundary. Signed-off-by: Chris Down <chris@chrisdown.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hugh Dickins <hughd@google.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/cover.1594661218.git.chris@chrisdown.name Link: http://lkml.kernel.org/r/1986b9d63b986f08ec07a4aa4b2275e718e47d8a.1594661218.git.chris@chrisdown.name Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 13:20:20 +07:00
ino_t ino;
tmpfs: per-superblock i_ino support Patch series "tmpfs: inode: Reduce risk of inum overflow", v7. In Facebook production we are seeing heavy i_ino wraparounds on tmpfs. On affected tiers, in excess of 10% of hosts show multiple files with different content and the same inode number, with some servers even having as many as 150 duplicated inode numbers with differing file content. This causes actual, tangible problems in production. For example, we have complaints from those working on remote caches that their application is reporting cache corruptions because it uses (device, inodenum) to establish the identity of a particular cache object, but because it's not unique any more, the application refuses to continue and reports cache corruption. Even worse, sometimes applications may not even detect the corruption but may continue anyway, causing phantom and hard to debug behaviour. In general, userspace applications expect that (device, inodenum) should be enough to be uniquely point to one inode, which seems fair enough. One might also need to check the generation, but in this case: 1. That's not currently exposed to userspace (ioctl(...FS_IOC_GETVERSION...) returns ENOTTY on tmpfs); 2. Even with generation, there shouldn't be two live inodes with the same inode number on one device. In order to mitigate this, we take a two-pronged approach: 1. Moving inum generation from being global to per-sb for tmpfs. This itself allows some reduction in i_ino churn. This works on both 64- and 32- bit machines. 2. Adding inode{64,32} for tmpfs. This fix is supported on machines with 64-bit ino_t only: we allow users to mount tmpfs with a new inode64 option that uses the full width of ino_t, or CONFIG_TMPFS_INODE64. You can see how this compares to previous related patches which didn't implement this per-superblock: - https://patchwork.kernel.org/patch/11254001/ - https://patchwork.kernel.org/patch/11023915/ This patch (of 2): get_next_ino has a number of problems: - It uses and returns a uint, which is susceptible to become overflowed if a lot of volatile inodes that use get_next_ino are created. - It's global, with no specificity per-sb or even per-filesystem. This means it's not that difficult to cause inode number wraparounds on a single device, which can result in having multiple distinct inodes with the same inode number. This patch adds a per-superblock counter that mitigates the second case. This design also allows us to later have a specific i_ino size per-device, for example, allowing users to choose whether to use 32- or 64-bit inodes for each tmpfs mount. This is implemented in the next commit. For internal shmem mounts which may be less tolerant to spinlock delays, we implement a percpu batching scheme which only takes the stat_lock at each batch boundary. Signed-off-by: Chris Down <chris@chrisdown.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hugh Dickins <hughd@google.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/cover.1594661218.git.chris@chrisdown.name Link: http://lkml.kernel.org/r/1986b9d63b986f08ec07a4aa4b2275e718e47d8a.1594661218.git.chris@chrisdown.name Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 13:20:20 +07:00
if (shmem_reserve_inode(sb, &ino))
return NULL;
inode = new_inode(sb);
if (inode) {
tmpfs: per-superblock i_ino support Patch series "tmpfs: inode: Reduce risk of inum overflow", v7. In Facebook production we are seeing heavy i_ino wraparounds on tmpfs. On affected tiers, in excess of 10% of hosts show multiple files with different content and the same inode number, with some servers even having as many as 150 duplicated inode numbers with differing file content. This causes actual, tangible problems in production. For example, we have complaints from those working on remote caches that their application is reporting cache corruptions because it uses (device, inodenum) to establish the identity of a particular cache object, but because it's not unique any more, the application refuses to continue and reports cache corruption. Even worse, sometimes applications may not even detect the corruption but may continue anyway, causing phantom and hard to debug behaviour. In general, userspace applications expect that (device, inodenum) should be enough to be uniquely point to one inode, which seems fair enough. One might also need to check the generation, but in this case: 1. That's not currently exposed to userspace (ioctl(...FS_IOC_GETVERSION...) returns ENOTTY on tmpfs); 2. Even with generation, there shouldn't be two live inodes with the same inode number on one device. In order to mitigate this, we take a two-pronged approach: 1. Moving inum generation from being global to per-sb for tmpfs. This itself allows some reduction in i_ino churn. This works on both 64- and 32- bit machines. 2. Adding inode{64,32} for tmpfs. This fix is supported on machines with 64-bit ino_t only: we allow users to mount tmpfs with a new inode64 option that uses the full width of ino_t, or CONFIG_TMPFS_INODE64. You can see how this compares to previous related patches which didn't implement this per-superblock: - https://patchwork.kernel.org/patch/11254001/ - https://patchwork.kernel.org/patch/11023915/ This patch (of 2): get_next_ino has a number of problems: - It uses and returns a uint, which is susceptible to become overflowed if a lot of volatile inodes that use get_next_ino are created. - It's global, with no specificity per-sb or even per-filesystem. This means it's not that difficult to cause inode number wraparounds on a single device, which can result in having multiple distinct inodes with the same inode number. This patch adds a per-superblock counter that mitigates the second case. This design also allows us to later have a specific i_ino size per-device, for example, allowing users to choose whether to use 32- or 64-bit inodes for each tmpfs mount. This is implemented in the next commit. For internal shmem mounts which may be less tolerant to spinlock delays, we implement a percpu batching scheme which only takes the stat_lock at each batch boundary. Signed-off-by: Chris Down <chris@chrisdown.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hugh Dickins <hughd@google.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/cover.1594661218.git.chris@chrisdown.name Link: http://lkml.kernel.org/r/1986b9d63b986f08ec07a4aa4b2275e718e47d8a.1594661218.git.chris@chrisdown.name Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 13:20:20 +07:00
inode->i_ino = ino;
inode_init_owner(inode, dir, mode);
inode->i_blocks = 0;
inode->i_atime = inode->i_mtime = inode->i_ctime = current_time(inode);
inode->i_generation = prandom_u32();
info = SHMEM_I(inode);
memset(info, 0, (char *)inode - (char *)info);
spin_lock_init(&info->lock);
mm: swapoff: shmem_unuse() stop eviction without igrab() The igrab() in shmem_unuse() looks good, but we forgot that it gives no protection against concurrent unmounting: a point made by Konstantin Khlebnikov eight years ago, and then fixed in 2.6.39 by 778dd893ae78 ("tmpfs: fix race between umount and swapoff"). The current 5.1-rc swapoff is liable to hit "VFS: Busy inodes after unmount of tmpfs. Self-destruct in 5 seconds. Have a nice day..." followed by GPF. Once again, give up on using igrab(); but don't go back to making such heavy-handed use of shmem_swaplist_mutex as last time: that would spoil the new design, and I expect could deadlock inside shmem_swapin_page(). Instead, shmem_unuse() just raise a "stop_eviction" count in the shmem- specific inode, and shmem_evict_inode() wait for that to go down to 0. Call it "stop_eviction" rather than "swapoff_busy" because it can be put to use for others later (huge tmpfs patches expect to use it). That simplifies shmem_unuse(), protecting it from both unlink and unmount; and in practice lets it locate all the swap in its first try. But do not rely on that: there's still a theoretical case, when shmem_writepage() might have been preempted after its get_swap_page(), before making the swap entry visible to swapoff. [hughd@google.com: remove incorrect list_del()] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1904091133570.1898@eggly.anvils Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1904081259400.1523@eggly.anvils Fixes: b56a2d8af914 ("mm: rid swapoff of quadratic complexity") Signed-off-by: Hugh Dickins <hughd@google.com> Cc: "Alex Xu (Hello71)" <alex_y_xu@yahoo.ca> Cc: Huang Ying <ying.huang@intel.com> Cc: Kelley Nielsen <kelleynnn@gmail.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Rik van Riel <riel@surriel.com> Cc: Vineeth Pillai <vpillai@digitalocean.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-19 07:50:13 +07:00
atomic_set(&info->stop_eviction, 0);
shm: add sealing API If two processes share a common memory region, they usually want some guarantees to allow safe access. This often includes: - one side cannot overwrite data while the other reads it - one side cannot shrink the buffer while the other accesses it - one side cannot grow the buffer beyond previously set boundaries If there is a trust-relationship between both parties, there is no need for policy enforcement. However, if there's no trust relationship (eg., for general-purpose IPC) sharing memory-regions is highly fragile and often not possible without local copies. Look at the following two use-cases: 1) A graphics client wants to share its rendering-buffer with a graphics-server. The memory-region is allocated by the client for read/write access and a second FD is passed to the server. While scanning out from the memory region, the server has no guarantee that the client doesn't shrink the buffer at any time, requiring rather cumbersome SIGBUS handling. 2) A process wants to perform an RPC on another process. To avoid huge bandwidth consumption, zero-copy is preferred. After a message is assembled in-memory and a FD is passed to the remote side, both sides want to be sure that neither modifies this shared copy, anymore. The source may have put sensible data into the message without a separate copy and the target may want to parse the message inline, to avoid a local copy. While SIGBUS handling, POSIX mandatory locking and MAP_DENYWRITE provide ways to achieve most of this, the first one is unproportionally ugly to use in libraries and the latter two are broken/racy or even disabled due to denial of service attacks. This patch introduces the concept of SEALING. If you seal a file, a specific set of operations is blocked on that file forever. Unlike locks, seals can only be set, never removed. Hence, once you verified a specific set of seals is set, you're guaranteed that no-one can perform the blocked operations on this file, anymore. An initial set of SEALS is introduced by this patch: - SHRINK: If SEAL_SHRINK is set, the file in question cannot be reduced in size. This affects ftruncate() and open(O_TRUNC). - GROW: If SEAL_GROW is set, the file in question cannot be increased in size. This affects ftruncate(), fallocate() and write(). - WRITE: If SEAL_WRITE is set, no write operations (besides resizing) are possible. This affects fallocate(PUNCH_HOLE), mmap() and write(). - SEAL: If SEAL_SEAL is set, no further seals can be added to a file. This basically prevents the F_ADD_SEAL operation on a file and can be set to prevent others from adding further seals that you don't want. The described use-cases can easily use these seals to provide safe use without any trust-relationship: 1) The graphics server can verify that a passed file-descriptor has SEAL_SHRINK set. This allows safe scanout, while the client is allowed to increase buffer size for window-resizing on-the-fly. Concurrent writes are explicitly allowed. 2) For general-purpose IPC, both processes can verify that SEAL_SHRINK, SEAL_GROW and SEAL_WRITE are set. This guarantees that neither process can modify the data while the other side parses it. Furthermore, it guarantees that even with writable FDs passed to the peer, it cannot increase the size to hit memory-limits of the source process (in case the file-storage is accounted to the source). The new API is an extension to fcntl(), adding two new commands: F_GET_SEALS: Return a bitset describing the seals on the file. This can be called on any FD if the underlying file supports sealing. F_ADD_SEALS: Change the seals of a given file. This requires WRITE access to the file and F_SEAL_SEAL may not already be set. Furthermore, the underlying file must support sealing and there may not be any existing shared mapping of that file. Otherwise, EBADF/EPERM is returned. The given seals are _added_ to the existing set of seals on the file. You cannot remove seals again. The fcntl() handler is currently specific to shmem and disabled on all files. A file needs to explicitly support sealing for this interface to work. A separate syscall is added in a follow-up, which creates files that support sealing. There is no intention to support this on other file-systems. Semantics are unclear for non-volatile files and we lack any use-case right now. Therefore, the implementation is specific to shmem. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ryan Lortie <desrt@desrt.ca> Cc: Lennart Poettering <lennart@poettering.net> Cc: Daniel Mack <zonque@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 04:25:27 +07:00
info->seals = F_SEAL_SEAL;
info->flags = flags & VM_NORESERVE;
INIT_LIST_HEAD(&info->shrinklist);
INIT_LIST_HEAD(&info->swaplist);
simple_xattrs_init(&info->xattrs);
cache_no_acl(inode);
switch (mode & S_IFMT) {
default:
inode->i_op = &shmem_special_inode_operations;
init_special_inode(inode, mode, dev);
break;
case S_IFREG:
inode->i_mapping->a_ops = &shmem_aops;
inode->i_op = &shmem_inode_operations;
inode->i_fop = &shmem_file_operations;
mempolicy: use struct mempolicy pointer in shmem_sb_info This patch replaces the mempolicy mode, mode_flags, and nodemask in the shmem_sb_info struct with a struct mempolicy pointer, initialized to NULL. This removes dependency on the details of mempolicy from shmem.c and hugetlbfs inode.c and simplifies the interfaces. mpol_parse_str() in mempolicy.c is changed to return, via a pointer to a pointer arg, a struct mempolicy pointer on success. For MPOL_DEFAULT, the returned pointer is NULL. Further, mpol_parse_str() now takes a 'no_context' argument that causes the input nodemask to be stored in the w.user_nodemask of the created mempolicy for use when the mempolicy is installed in a tmpfs inode shared policy tree. At that time, any cpuset contextualization is applied to the original input nodemask. This preserves the previous behavior where the input nodemask was stored in the superblock. We can think of the returned mempolicy as "context free". Because mpol_parse_str() is now calling mpol_new(), we can remove from mpol_to_str() the semantic checks that mpol_new() already performs. Add 'no_context' parameter to mpol_to_str() to specify that it should format the nodemask in w.user_nodemask for 'bind' and 'interleave' policies. Change mpol_shared_policy_init() to take a pointer to a "context free" struct mempolicy and to create a new, "contextualized" mempolicy using the mode, mode_flags and user_nodemask from the input mempolicy. Note: we know that the mempolicy passed to mpol_to_str() or mpol_shared_policy_init() from a tmpfs superblock is "context free". This is currently the only instance thereof. However, if we found more uses for this concept, and introduced any ambiguity as to whether a mempolicy was context free or not, we could add another internal mode flag to identify context free mempolicies. Then, we could remove the 'no_context' argument from mpol_to_str(). Added shmem_get_sbmpol() to return a reference counted superblock mempolicy, if one exists, to pass to mpol_shared_policy_init(). We must add the reference under the sb stat_lock to prevent races with replacement of the mpol by remount. This reference is removed in mpol_shared_policy_init(). [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: another build fix] [akpm@linux-foundation.org: yet another build fix] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 16:13:26 +07:00
mpol_shared_policy_init(&info->policy,
shmem_get_sbmpol(sbinfo));
break;
case S_IFDIR:
inc_nlink(inode);
/* Some things misbehave if size == 0 on a directory */
inode->i_size = 2 * BOGO_DIRENT_SIZE;
inode->i_op = &shmem_dir_inode_operations;
inode->i_fop = &simple_dir_operations;
break;
case S_IFLNK:
/*
* Must not load anything in the rbtree,
* mpol_free_shared_policy will not be called.
*/
mempolicy: use struct mempolicy pointer in shmem_sb_info This patch replaces the mempolicy mode, mode_flags, and nodemask in the shmem_sb_info struct with a struct mempolicy pointer, initialized to NULL. This removes dependency on the details of mempolicy from shmem.c and hugetlbfs inode.c and simplifies the interfaces. mpol_parse_str() in mempolicy.c is changed to return, via a pointer to a pointer arg, a struct mempolicy pointer on success. For MPOL_DEFAULT, the returned pointer is NULL. Further, mpol_parse_str() now takes a 'no_context' argument that causes the input nodemask to be stored in the w.user_nodemask of the created mempolicy for use when the mempolicy is installed in a tmpfs inode shared policy tree. At that time, any cpuset contextualization is applied to the original input nodemask. This preserves the previous behavior where the input nodemask was stored in the superblock. We can think of the returned mempolicy as "context free". Because mpol_parse_str() is now calling mpol_new(), we can remove from mpol_to_str() the semantic checks that mpol_new() already performs. Add 'no_context' parameter to mpol_to_str() to specify that it should format the nodemask in w.user_nodemask for 'bind' and 'interleave' policies. Change mpol_shared_policy_init() to take a pointer to a "context free" struct mempolicy and to create a new, "contextualized" mempolicy using the mode, mode_flags and user_nodemask from the input mempolicy. Note: we know that the mempolicy passed to mpol_to_str() or mpol_shared_policy_init() from a tmpfs superblock is "context free". This is currently the only instance thereof. However, if we found more uses for this concept, and introduced any ambiguity as to whether a mempolicy was context free or not, we could add another internal mode flag to identify context free mempolicies. Then, we could remove the 'no_context' argument from mpol_to_str(). Added shmem_get_sbmpol() to return a reference counted superblock mempolicy, if one exists, to pass to mpol_shared_policy_init(). We must add the reference under the sb stat_lock to prevent races with replacement of the mpol by remount. This reference is removed in mpol_shared_policy_init(). [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: another build fix] [akpm@linux-foundation.org: yet another build fix] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 16:13:26 +07:00
mpol_shared_policy_init(&info->policy, NULL);
break;
}
mm: shmem.c: Correctly annotate new inodes for lockdep Directories and inodes don't necessarily need to be in the same lockdep class. For ex, hugetlbfs splits them out too to prevent false positives in lockdep. Annotate correctly after new inode creation. If its a directory inode, it will be put into a different class. This should fix a lockdep splat reported by syzbot: > ====================================================== > WARNING: possible circular locking dependency detected > 4.18.0-rc8-next-20180810+ #36 Not tainted > ------------------------------------------------------ > syz-executor900/4483 is trying to acquire lock: > 00000000d2bfc8fe (&sb->s_type->i_mutex_key#9){++++}, at: inode_lock > include/linux/fs.h:765 [inline] > 00000000d2bfc8fe (&sb->s_type->i_mutex_key#9){++++}, at: > shmem_fallocate+0x18b/0x12e0 mm/shmem.c:2602 > > but task is already holding lock: > 0000000025208078 (ashmem_mutex){+.+.}, at: ashmem_shrink_scan+0xb4/0x630 > drivers/staging/android/ashmem.c:448 > > which lock already depends on the new lock. > > -> #2 (ashmem_mutex){+.+.}: > __mutex_lock_common kernel/locking/mutex.c:925 [inline] > __mutex_lock+0x171/0x1700 kernel/locking/mutex.c:1073 > mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1088 > ashmem_mmap+0x55/0x520 drivers/staging/android/ashmem.c:361 > call_mmap include/linux/fs.h:1844 [inline] > mmap_region+0xf27/0x1c50 mm/mmap.c:1762 > do_mmap+0xa10/0x1220 mm/mmap.c:1535 > do_mmap_pgoff include/linux/mm.h:2298 [inline] > vm_mmap_pgoff+0x213/0x2c0 mm/util.c:357 > ksys_mmap_pgoff+0x4da/0x660 mm/mmap.c:1585 > __do_sys_mmap arch/x86/kernel/sys_x86_64.c:100 [inline] > __se_sys_mmap arch/x86/kernel/sys_x86_64.c:91 [inline] > __x64_sys_mmap+0xe9/0x1b0 arch/x86/kernel/sys_x86_64.c:91 > do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 > entry_SYSCALL_64_after_hwframe+0x49/0xbe > > -> #1 (&mm->mmap_sem){++++}: > __might_fault+0x155/0x1e0 mm/memory.c:4568 > _copy_to_user+0x30/0x110 lib/usercopy.c:25 > copy_to_user include/linux/uaccess.h:155 [inline] > filldir+0x1ea/0x3a0 fs/readdir.c:196 > dir_emit_dot include/linux/fs.h:3464 [inline] > dir_emit_dots include/linux/fs.h:3475 [inline] > dcache_readdir+0x13a/0x620 fs/libfs.c:193 > iterate_dir+0x48b/0x5d0 fs/readdir.c:51 > __do_sys_getdents fs/readdir.c:231 [inline] > __se_sys_getdents fs/readdir.c:212 [inline] > __x64_sys_getdents+0x29f/0x510 fs/readdir.c:212 > do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 > entry_SYSCALL_64_after_hwframe+0x49/0xbe > > -> #0 (&sb->s_type->i_mutex_key#9){++++}: > lock_acquire+0x1e4/0x540 kernel/locking/lockdep.c:3924 > down_write+0x8f/0x130 kernel/locking/rwsem.c:70 > inode_lock include/linux/fs.h:765 [inline] > shmem_fallocate+0x18b/0x12e0 mm/shmem.c:2602 > ashmem_shrink_scan+0x236/0x630 drivers/staging/android/ashmem.c:455 > ashmem_ioctl+0x3ae/0x13a0 drivers/staging/android/ashmem.c:797 > vfs_ioctl fs/ioctl.c:46 [inline] > file_ioctl fs/ioctl.c:501 [inline] > do_vfs_ioctl+0x1de/0x1720 fs/ioctl.c:685 > ksys_ioctl+0xa9/0xd0 fs/ioctl.c:702 > __do_sys_ioctl fs/ioctl.c:709 [inline] > __se_sys_ioctl fs/ioctl.c:707 [inline] > __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:707 > do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 > entry_SYSCALL_64_after_hwframe+0x49/0xbe > > other info that might help us debug this: > > Chain exists of: > &sb->s_type->i_mutex_key#9 --> &mm->mmap_sem --> ashmem_mutex > > Possible unsafe locking scenario: > > CPU0 CPU1 > ---- ---- > lock(ashmem_mutex); > lock(&mm->mmap_sem); > lock(ashmem_mutex); > lock(&sb->s_type->i_mutex_key#9); > > *** DEADLOCK *** > > 1 lock held by syz-executor900/4483: > #0: 0000000025208078 (ashmem_mutex){+.+.}, at: > ashmem_shrink_scan+0xb4/0x630 drivers/staging/android/ashmem.c:448 Link: http://lkml.kernel.org/r/20180821231835.166639-1-joel@joelfernandes.org Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: NeilBrown <neilb@suse.com> Suggested-by: NeilBrown <neilb@suse.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-21 02:22:39 +07:00
lockdep_annotate_inode_mutex_key(inode);
} else
shmem_free_inode(sb);
return inode;
}
2014-04-04 04:47:46 +07:00
bool shmem_mapping(struct address_space *mapping)
{
return mapping->a_ops == &shmem_aops;
2014-04-04 04:47:46 +07:00
}
static int shmem_mfill_atomic_pte(struct mm_struct *dst_mm,
pmd_t *dst_pmd,
struct vm_area_struct *dst_vma,
unsigned long dst_addr,
unsigned long src_addr,
bool zeropage,
struct page **pagep)
{
struct inode *inode = file_inode(dst_vma->vm_file);
struct shmem_inode_info *info = SHMEM_I(inode);
struct address_space *mapping = inode->i_mapping;
gfp_t gfp = mapping_gfp_mask(mapping);
pgoff_t pgoff = linear_page_index(dst_vma, dst_addr);
spinlock_t *ptl;
void *page_kaddr;
struct page *page;
pte_t _dst_pte, *dst_pte;
int ret;
pgoff_t offset, max_off;
ret = -ENOMEM;
if (!shmem_inode_acct_block(inode, 1))
goto out;
if (!*pagep) {
page = shmem_alloc_page(gfp, info, pgoff);
if (!page)
goto out_unacct_blocks;
if (!zeropage) { /* mcopy_atomic */
page_kaddr = kmap_atomic(page);
ret = copy_from_user(page_kaddr,
(const void __user *)src_addr,
PAGE_SIZE);
kunmap_atomic(page_kaddr);
/* fallback to copy_from_user outside mmap_lock */
if (unlikely(ret)) {
*pagep = page;
shmem_inode_unacct_blocks(inode, 1);
/* don't free the page */
userfaultfd: use ENOENT instead of EFAULT if the atomic copy user fails Patch series "userfaultfd shmem updates". Jann found two bugs in the userfaultfd shmem MAP_SHARED backend: the lack of the VM_MAYWRITE check and the lack of i_size checks. Then looking into the above we also fixed the MAP_PRIVATE case. Hugh by source review also found a data loss source if UFFDIO_COPY is used on shmem MAP_SHARED PROT_READ mappings (the production usages incidentally run with PROT_READ|PROT_WRITE, so the data loss couldn't happen in those production usages like with QEMU). The whole patchset is marked for stable. We verified QEMU postcopy live migration with guest running on shmem MAP_PRIVATE run as well as before after the fix of shmem MAP_PRIVATE. Regardless if it's shmem or hugetlbfs or MAP_PRIVATE or MAP_SHARED, QEMU unconditionally invokes a punch hole if the guest mapping is filebacked and a MADV_DONTNEED too (needed to get rid of the MAP_PRIVATE COWs and for the anon backend). This patch (of 5): We internally used EFAULT to communicate with the caller, switch to ENOENT, so EFAULT can be used as a non internal retval. Link: http://lkml.kernel.org/r/20181126173452.26955-2-aarcange@redhat.com Fixes: 4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support") Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Hugh Dickins <hughd@google.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Jann Horn <jannh@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: <stable@vger.kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-01 05:09:25 +07:00
return -ENOENT;
}
} else { /* mfill_zeropage_atomic */
clear_highpage(page);
}
} else {
page = *pagep;
*pagep = NULL;
}
VM_BUG_ON(PageLocked(page) || PageSwapBacked(page));
__SetPageLocked(page);
__SetPageSwapBacked(page);
__SetPageUptodate(page);
ret = -EFAULT;
offset = linear_page_index(dst_vma, dst_addr);
max_off = DIV_ROUND_UP(i_size_read(inode), PAGE_SIZE);
if (unlikely(offset >= max_off))
goto out_release;
ret = shmem_add_to_page_cache(page, mapping, pgoff, NULL,
mm: memcontrol: convert page cache to a new mem_cgroup_charge() API The try/commit/cancel protocol that memcg uses dates back to when pages used to be uncharged upon removal from the page cache, and thus couldn't be committed before the insertion had succeeded. Nowadays, pages are uncharged when they are physically freed; it doesn't matter whether the insertion was successful or not. For the page cache, the transaction dance has become unnecessary. Introduce a mem_cgroup_charge() function that simply charges a newly allocated page to a cgroup and sets up page->mem_cgroup in one single step. If the insertion fails, the caller doesn't have to do anything but free/put the page. Then switch the page cache over to this new API. Subsequent patches will also convert anon pages, but it needs a bit more prep work. Right now, memcg depends on page->mapping being already set up at the time of charging, so that it can maintain its own MEMCG_CACHE and MEMCG_RSS counters. For anon, page->mapping is set under the same pte lock under which the page is publishd, so a single charge point that can block doesn't work there just yet. The following prep patches will replace the private memcg counters with the generic vmstat counters, thus removing the page->mapping dependency, then complete the transition to the new single-point charge API and delete the old transactional scheme. v2: leave shmem swapcache when charging fails to avoid double IO (Joonsoo) v3: rebase on preceeding shmem simplification patch Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Balbir Singh <bsingharora@gmail.com> Link: http://lkml.kernel.org/r/20200508183105.225460-6-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 06:01:41 +07:00
gfp & GFP_RECLAIM_MASK, dst_mm);
if (ret)
mm: memcontrol: convert page cache to a new mem_cgroup_charge() API The try/commit/cancel protocol that memcg uses dates back to when pages used to be uncharged upon removal from the page cache, and thus couldn't be committed before the insertion had succeeded. Nowadays, pages are uncharged when they are physically freed; it doesn't matter whether the insertion was successful or not. For the page cache, the transaction dance has become unnecessary. Introduce a mem_cgroup_charge() function that simply charges a newly allocated page to a cgroup and sets up page->mem_cgroup in one single step. If the insertion fails, the caller doesn't have to do anything but free/put the page. Then switch the page cache over to this new API. Subsequent patches will also convert anon pages, but it needs a bit more prep work. Right now, memcg depends on page->mapping being already set up at the time of charging, so that it can maintain its own MEMCG_CACHE and MEMCG_RSS counters. For anon, page->mapping is set under the same pte lock under which the page is publishd, so a single charge point that can block doesn't work there just yet. The following prep patches will replace the private memcg counters with the generic vmstat counters, thus removing the page->mapping dependency, then complete the transition to the new single-point charge API and delete the old transactional scheme. v2: leave shmem swapcache when charging fails to avoid double IO (Joonsoo) v3: rebase on preceeding shmem simplification patch Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Balbir Singh <bsingharora@gmail.com> Link: http://lkml.kernel.org/r/20200508183105.225460-6-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 06:01:41 +07:00
goto out_release;
_dst_pte = mk_pte(page, dst_vma->vm_page_prot);
if (dst_vma->vm_flags & VM_WRITE)
_dst_pte = pte_mkwrite(pte_mkdirty(_dst_pte));
else {
/*
* We don't set the pte dirty if the vma has no
* VM_WRITE permission, so mark the page dirty or it
* could be freed from under us. We could do it
* unconditionally before unlock_page(), but doing it
* only if VM_WRITE is not set is faster.
*/
set_page_dirty(page);
}
dst_pte = pte_offset_map_lock(dst_mm, dst_pmd, dst_addr, &ptl);
ret = -EFAULT;
max_off = DIV_ROUND_UP(i_size_read(inode), PAGE_SIZE);
if (unlikely(offset >= max_off))
mm: memcontrol: convert page cache to a new mem_cgroup_charge() API The try/commit/cancel protocol that memcg uses dates back to when pages used to be uncharged upon removal from the page cache, and thus couldn't be committed before the insertion had succeeded. Nowadays, pages are uncharged when they are physically freed; it doesn't matter whether the insertion was successful or not. For the page cache, the transaction dance has become unnecessary. Introduce a mem_cgroup_charge() function that simply charges a newly allocated page to a cgroup and sets up page->mem_cgroup in one single step. If the insertion fails, the caller doesn't have to do anything but free/put the page. Then switch the page cache over to this new API. Subsequent patches will also convert anon pages, but it needs a bit more prep work. Right now, memcg depends on page->mapping being already set up at the time of charging, so that it can maintain its own MEMCG_CACHE and MEMCG_RSS counters. For anon, page->mapping is set under the same pte lock under which the page is publishd, so a single charge point that can block doesn't work there just yet. The following prep patches will replace the private memcg counters with the generic vmstat counters, thus removing the page->mapping dependency, then complete the transition to the new single-point charge API and delete the old transactional scheme. v2: leave shmem swapcache when charging fails to avoid double IO (Joonsoo) v3: rebase on preceeding shmem simplification patch Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Balbir Singh <bsingharora@gmail.com> Link: http://lkml.kernel.org/r/20200508183105.225460-6-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 06:01:41 +07:00
goto out_release_unlock;
ret = -EEXIST;
if (!pte_none(*dst_pte))
mm: memcontrol: convert page cache to a new mem_cgroup_charge() API The try/commit/cancel protocol that memcg uses dates back to when pages used to be uncharged upon removal from the page cache, and thus couldn't be committed before the insertion had succeeded. Nowadays, pages are uncharged when they are physically freed; it doesn't matter whether the insertion was successful or not. For the page cache, the transaction dance has become unnecessary. Introduce a mem_cgroup_charge() function that simply charges a newly allocated page to a cgroup and sets up page->mem_cgroup in one single step. If the insertion fails, the caller doesn't have to do anything but free/put the page. Then switch the page cache over to this new API. Subsequent patches will also convert anon pages, but it needs a bit more prep work. Right now, memcg depends on page->mapping being already set up at the time of charging, so that it can maintain its own MEMCG_CACHE and MEMCG_RSS counters. For anon, page->mapping is set under the same pte lock under which the page is publishd, so a single charge point that can block doesn't work there just yet. The following prep patches will replace the private memcg counters with the generic vmstat counters, thus removing the page->mapping dependency, then complete the transition to the new single-point charge API and delete the old transactional scheme. v2: leave shmem swapcache when charging fails to avoid double IO (Joonsoo) v3: rebase on preceeding shmem simplification patch Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Balbir Singh <bsingharora@gmail.com> Link: http://lkml.kernel.org/r/20200508183105.225460-6-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 06:01:41 +07:00
goto out_release_unlock;
lru_cache_add(page);
mm: shmem: disable interrupt when acquiring info->lock in userfaultfd_copy path Syzbot reported the below lockdep splat: WARNING: possible irq lock inversion dependency detected 5.6.0-rc7-syzkaller #0 Not tainted -------------------------------------------------------- syz-executor.0/10317 just changed the state of lock: ffff888021d16568 (&(&info->lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:338 [inline] ffff888021d16568 (&(&info->lock)->rlock){+.+.}, at: shmem_mfill_atomic_pte+0x1012/0x21c0 mm/shmem.c:2407 but this lock was taken by another, SOFTIRQ-safe lock in the past: (&(&xa->xa_lock)->rlock#5){..-.} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(&info->lock)->rlock); local_irq_disable(); lock(&(&xa->xa_lock)->rlock#5); lock(&(&info->lock)->rlock); <Interrupt> lock(&(&xa->xa_lock)->rlock#5); *** DEADLOCK *** The full report is quite lengthy, please see: https://lore.kernel.org/linux-mm/alpine.LSU.2.11.2004152007370.13597@eggly.anvils/T/#m813b412c5f78e25ca8c6c7734886ed4de43f241d It is because CPU 0 held info->lock with IRQ enabled in userfaultfd_copy path, then CPU 1 is splitting a THP which held xa_lock and info->lock in IRQ disabled context at the same time. If softirq comes in to acquire xa_lock, the deadlock would be triggered. The fix is to acquire/release info->lock with *_irq version instead of plain spin_{lock,unlock} to make it softirq safe. Fixes: 4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support") Reported-by: syzbot+e27980339d305f2dbfd9@syzkaller.appspotmail.com Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: syzbot+e27980339d305f2dbfd9@syzkaller.appspotmail.com Acked-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Link: http://lkml.kernel.org/r/1587061357-122619-1-git-send-email-yang.shi@linux.alibaba.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-21 08:14:17 +07:00
spin_lock_irq(&info->lock);
info->alloced++;
inode->i_blocks += BLOCKS_PER_PAGE;
shmem_recalc_inode(inode);
mm: shmem: disable interrupt when acquiring info->lock in userfaultfd_copy path Syzbot reported the below lockdep splat: WARNING: possible irq lock inversion dependency detected 5.6.0-rc7-syzkaller #0 Not tainted -------------------------------------------------------- syz-executor.0/10317 just changed the state of lock: ffff888021d16568 (&(&info->lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:338 [inline] ffff888021d16568 (&(&info->lock)->rlock){+.+.}, at: shmem_mfill_atomic_pte+0x1012/0x21c0 mm/shmem.c:2407 but this lock was taken by another, SOFTIRQ-safe lock in the past: (&(&xa->xa_lock)->rlock#5){..-.} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&(&info->lock)->rlock); local_irq_disable(); lock(&(&xa->xa_lock)->rlock#5); lock(&(&info->lock)->rlock); <Interrupt> lock(&(&xa->xa_lock)->rlock#5); *** DEADLOCK *** The full report is quite lengthy, please see: https://lore.kernel.org/linux-mm/alpine.LSU.2.11.2004152007370.13597@eggly.anvils/T/#m813b412c5f78e25ca8c6c7734886ed4de43f241d It is because CPU 0 held info->lock with IRQ enabled in userfaultfd_copy path, then CPU 1 is splitting a THP which held xa_lock and info->lock in IRQ disabled context at the same time. If softirq comes in to acquire xa_lock, the deadlock would be triggered. The fix is to acquire/release info->lock with *_irq version instead of plain spin_{lock,unlock} to make it softirq safe. Fixes: 4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support") Reported-by: syzbot+e27980339d305f2dbfd9@syzkaller.appspotmail.com Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: syzbot+e27980339d305f2dbfd9@syzkaller.appspotmail.com Acked-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Link: http://lkml.kernel.org/r/1587061357-122619-1-git-send-email-yang.shi@linux.alibaba.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-21 08:14:17 +07:00
spin_unlock_irq(&info->lock);
inc_mm_counter(dst_mm, mm_counter_file(page));
page_add_file_rmap(page, false);
set_pte_at(dst_mm, dst_addr, dst_pte, _dst_pte);
/* No need to invalidate - it was non-present before */
update_mmu_cache(dst_vma, dst_addr, dst_pte);
pte_unmap_unlock(dst_pte, ptl);
unlock_page(page);
ret = 0;
out:
return ret;
mm: memcontrol: convert page cache to a new mem_cgroup_charge() API The try/commit/cancel protocol that memcg uses dates back to when pages used to be uncharged upon removal from the page cache, and thus couldn't be committed before the insertion had succeeded. Nowadays, pages are uncharged when they are physically freed; it doesn't matter whether the insertion was successful or not. For the page cache, the transaction dance has become unnecessary. Introduce a mem_cgroup_charge() function that simply charges a newly allocated page to a cgroup and sets up page->mem_cgroup in one single step. If the insertion fails, the caller doesn't have to do anything but free/put the page. Then switch the page cache over to this new API. Subsequent patches will also convert anon pages, but it needs a bit more prep work. Right now, memcg depends on page->mapping being already set up at the time of charging, so that it can maintain its own MEMCG_CACHE and MEMCG_RSS counters. For anon, page->mapping is set under the same pte lock under which the page is publishd, so a single charge point that can block doesn't work there just yet. The following prep patches will replace the private memcg counters with the generic vmstat counters, thus removing the page->mapping dependency, then complete the transition to the new single-point charge API and delete the old transactional scheme. v2: leave shmem swapcache when charging fails to avoid double IO (Joonsoo) v3: rebase on preceeding shmem simplification patch Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Balbir Singh <bsingharora@gmail.com> Link: http://lkml.kernel.org/r/20200508183105.225460-6-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 06:01:41 +07:00
out_release_unlock:
pte_unmap_unlock(dst_pte, ptl);
ClearPageDirty(page);
delete_from_page_cache(page);
out_release:
unlock_page(page);
put_page(page);
out_unacct_blocks:
shmem_inode_unacct_blocks(inode, 1);
goto out;
}
int shmem_mcopy_atomic_pte(struct mm_struct *dst_mm,
pmd_t *dst_pmd,
struct vm_area_struct *dst_vma,
unsigned long dst_addr,
unsigned long src_addr,
struct page **pagep)
{
return shmem_mfill_atomic_pte(dst_mm, dst_pmd, dst_vma,
dst_addr, src_addr, false, pagep);
}
int shmem_mfill_zeropage_pte(struct mm_struct *dst_mm,
pmd_t *dst_pmd,
struct vm_area_struct *dst_vma,
unsigned long dst_addr)
{
struct page *page = NULL;
return shmem_mfill_atomic_pte(dst_mm, dst_pmd, dst_vma,
dst_addr, 0, true, &page);
}
#ifdef CONFIG_TMPFS
static const struct inode_operations shmem_symlink_inode_operations;
static const struct inode_operations shmem_short_symlink_operations;
#ifdef CONFIG_TMPFS_XATTR
static int shmem_initxattrs(struct inode *, const struct xattr *, void *);
#else
#define shmem_initxattrs NULL
#endif
static int
shmem_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
struct inode *inode = mapping->host;
shm: add sealing API If two processes share a common memory region, they usually want some guarantees to allow safe access. This often includes: - one side cannot overwrite data while the other reads it - one side cannot shrink the buffer while the other accesses it - one side cannot grow the buffer beyond previously set boundaries If there is a trust-relationship between both parties, there is no need for policy enforcement. However, if there's no trust relationship (eg., for general-purpose IPC) sharing memory-regions is highly fragile and often not possible without local copies. Look at the following two use-cases: 1) A graphics client wants to share its rendering-buffer with a graphics-server. The memory-region is allocated by the client for read/write access and a second FD is passed to the server. While scanning out from the memory region, the server has no guarantee that the client doesn't shrink the buffer at any time, requiring rather cumbersome SIGBUS handling. 2) A process wants to perform an RPC on another process. To avoid huge bandwidth consumption, zero-copy is preferred. After a message is assembled in-memory and a FD is passed to the remote side, both sides want to be sure that neither modifies this shared copy, anymore. The source may have put sensible data into the message without a separate copy and the target may want to parse the message inline, to avoid a local copy. While SIGBUS handling, POSIX mandatory locking and MAP_DENYWRITE provide ways to achieve most of this, the first one is unproportionally ugly to use in libraries and the latter two are broken/racy or even disabled due to denial of service attacks. This patch introduces the concept of SEALING. If you seal a file, a specific set of operations is blocked on that file forever. Unlike locks, seals can only be set, never removed. Hence, once you verified a specific set of seals is set, you're guaranteed that no-one can perform the blocked operations on this file, anymore. An initial set of SEALS is introduced by this patch: - SHRINK: If SEAL_SHRINK is set, the file in question cannot be reduced in size. This affects ftruncate() and open(O_TRUNC). - GROW: If SEAL_GROW is set, the file in question cannot be increased in size. This affects ftruncate(), fallocate() and write(). - WRITE: If SEAL_WRITE is set, no write operations (besides resizing) are possible. This affects fallocate(PUNCH_HOLE), mmap() and write(). - SEAL: If SEAL_SEAL is set, no further seals can be added to a file. This basically prevents the F_ADD_SEAL operation on a file and can be set to prevent others from adding further seals that you don't want. The described use-cases can easily use these seals to provide safe use without any trust-relationship: 1) The graphics server can verify that a passed file-descriptor has SEAL_SHRINK set. This allows safe scanout, while the client is allowed to increase buffer size for window-resizing on-the-fly. Concurrent writes are explicitly allowed. 2) For general-purpose IPC, both processes can verify that SEAL_SHRINK, SEAL_GROW and SEAL_WRITE are set. This guarantees that neither process can modify the data while the other side parses it. Furthermore, it guarantees that even with writable FDs passed to the peer, it cannot increase the size to hit memory-limits of the source process (in case the file-storage is accounted to the source). The new API is an extension to fcntl(), adding two new commands: F_GET_SEALS: Return a bitset describing the seals on the file. This can be called on any FD if the underlying file supports sealing. F_ADD_SEALS: Change the seals of a given file. This requires WRITE access to the file and F_SEAL_SEAL may not already be set. Furthermore, the underlying file must support sealing and there may not be any existing shared mapping of that file. Otherwise, EBADF/EPERM is returned. The given seals are _added_ to the existing set of seals on the file. You cannot remove seals again. The fcntl() handler is currently specific to shmem and disabled on all files. A file needs to explicitly support sealing for this interface to work. A separate syscall is added in a follow-up, which creates files that support sealing. There is no intention to support this on other file-systems. Semantics are unclear for non-volatile files and we lack any use-case right now. Therefore, the implementation is specific to shmem. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ryan Lortie <desrt@desrt.ca> Cc: Lennart Poettering <lennart@poettering.net> Cc: Daniel Mack <zonque@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 04:25:27 +07:00
struct shmem_inode_info *info = SHMEM_I(inode);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
pgoff_t index = pos >> PAGE_SHIFT;
shm: add sealing API If two processes share a common memory region, they usually want some guarantees to allow safe access. This often includes: - one side cannot overwrite data while the other reads it - one side cannot shrink the buffer while the other accesses it - one side cannot grow the buffer beyond previously set boundaries If there is a trust-relationship between both parties, there is no need for policy enforcement. However, if there's no trust relationship (eg., for general-purpose IPC) sharing memory-regions is highly fragile and often not possible without local copies. Look at the following two use-cases: 1) A graphics client wants to share its rendering-buffer with a graphics-server. The memory-region is allocated by the client for read/write access and a second FD is passed to the server. While scanning out from the memory region, the server has no guarantee that the client doesn't shrink the buffer at any time, requiring rather cumbersome SIGBUS handling. 2) A process wants to perform an RPC on another process. To avoid huge bandwidth consumption, zero-copy is preferred. After a message is assembled in-memory and a FD is passed to the remote side, both sides want to be sure that neither modifies this shared copy, anymore. The source may have put sensible data into the message without a separate copy and the target may want to parse the message inline, to avoid a local copy. While SIGBUS handling, POSIX mandatory locking and MAP_DENYWRITE provide ways to achieve most of this, the first one is unproportionally ugly to use in libraries and the latter two are broken/racy or even disabled due to denial of service attacks. This patch introduces the concept of SEALING. If you seal a file, a specific set of operations is blocked on that file forever. Unlike locks, seals can only be set, never removed. Hence, once you verified a specific set of seals is set, you're guaranteed that no-one can perform the blocked operations on this file, anymore. An initial set of SEALS is introduced by this patch: - SHRINK: If SEAL_SHRINK is set, the file in question cannot be reduced in size. This affects ftruncate() and open(O_TRUNC). - GROW: If SEAL_GROW is set, the file in question cannot be increased in size. This affects ftruncate(), fallocate() and write(). - WRITE: If SEAL_WRITE is set, no write operations (besides resizing) are possible. This affects fallocate(PUNCH_HOLE), mmap() and write(). - SEAL: If SEAL_SEAL is set, no further seals can be added to a file. This basically prevents the F_ADD_SEAL operation on a file and can be set to prevent others from adding further seals that you don't want. The described use-cases can easily use these seals to provide safe use without any trust-relationship: 1) The graphics server can verify that a passed file-descriptor has SEAL_SHRINK set. This allows safe scanout, while the client is allowed to increase buffer size for window-resizing on-the-fly. Concurrent writes are explicitly allowed. 2) For general-purpose IPC, both processes can verify that SEAL_SHRINK, SEAL_GROW and SEAL_WRITE are set. This guarantees that neither process can modify the data while the other side parses it. Furthermore, it guarantees that even with writable FDs passed to the peer, it cannot increase the size to hit memory-limits of the source process (in case the file-storage is accounted to the source). The new API is an extension to fcntl(), adding two new commands: F_GET_SEALS: Return a bitset describing the seals on the file. This can be called on any FD if the underlying file supports sealing. F_ADD_SEALS: Change the seals of a given file. This requires WRITE access to the file and F_SEAL_SEAL may not already be set. Furthermore, the underlying file must support sealing and there may not be any existing shared mapping of that file. Otherwise, EBADF/EPERM is returned. The given seals are _added_ to the existing set of seals on the file. You cannot remove seals again. The fcntl() handler is currently specific to shmem and disabled on all files. A file needs to explicitly support sealing for this interface to work. A separate syscall is added in a follow-up, which creates files that support sealing. There is no intention to support this on other file-systems. Semantics are unclear for non-volatile files and we lack any use-case right now. Therefore, the implementation is specific to shmem. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ryan Lortie <desrt@desrt.ca> Cc: Lennart Poettering <lennart@poettering.net> Cc: Daniel Mack <zonque@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 04:25:27 +07:00
/* i_mutex is held by caller */
mm/memfd: add an F_SEAL_FUTURE_WRITE seal to memfd Android uses ashmem for sharing memory regions. We are looking forward to migrating all usecases of ashmem to memfd so that we can possibly remove the ashmem driver in the future from staging while also benefiting from using memfd and contributing to it. Note staging drivers are also not ABI and generally can be removed at anytime. One of the main usecases Android has is the ability to create a region and mmap it as writeable, then add protection against making any "future" writes while keeping the existing already mmap'ed writeable-region active. This allows us to implement a usecase where receivers of the shared memory buffer can get a read-only view, while the sender continues to write to the buffer. See CursorWindow documentation in Android for more details: https://developer.android.com/reference/android/database/CursorWindow This usecase cannot be implemented with the existing F_SEAL_WRITE seal. To support the usecase, this patch adds a new F_SEAL_FUTURE_WRITE seal which prevents any future mmap and write syscalls from succeeding while keeping the existing mmap active. A better way to do F_SEAL_FUTURE_WRITE seal was discussed [1] last week where we don't need to modify core VFS structures to get the same behavior of the seal. This solves several side-effects pointed by Andy. self-tests are provided in later patch to verify the expected semantics. [1] https://lore.kernel.org/lkml/20181111173650.GA256781@google.com/ Thanks a lot to Andy for suggestions to improve code. Link: http://lkml.kernel.org/r/20190112203816.85534-2-joel@joelfernandes.org Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Acked-by: John Stultz <john.stultz@linaro.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: J. Bruce Fields <bfields@fieldses.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Marc-Andr Lureau <marcandre.lureau@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:54 +07:00
if (unlikely(info->seals & (F_SEAL_GROW |
F_SEAL_WRITE | F_SEAL_FUTURE_WRITE))) {
if (info->seals & (F_SEAL_WRITE | F_SEAL_FUTURE_WRITE))
shm: add sealing API If two processes share a common memory region, they usually want some guarantees to allow safe access. This often includes: - one side cannot overwrite data while the other reads it - one side cannot shrink the buffer while the other accesses it - one side cannot grow the buffer beyond previously set boundaries If there is a trust-relationship between both parties, there is no need for policy enforcement. However, if there's no trust relationship (eg., for general-purpose IPC) sharing memory-regions is highly fragile and often not possible without local copies. Look at the following two use-cases: 1) A graphics client wants to share its rendering-buffer with a graphics-server. The memory-region is allocated by the client for read/write access and a second FD is passed to the server. While scanning out from the memory region, the server has no guarantee that the client doesn't shrink the buffer at any time, requiring rather cumbersome SIGBUS handling. 2) A process wants to perform an RPC on another process. To avoid huge bandwidth consumption, zero-copy is preferred. After a message is assembled in-memory and a FD is passed to the remote side, both sides want to be sure that neither modifies this shared copy, anymore. The source may have put sensible data into the message without a separate copy and the target may want to parse the message inline, to avoid a local copy. While SIGBUS handling, POSIX mandatory locking and MAP_DENYWRITE provide ways to achieve most of this, the first one is unproportionally ugly to use in libraries and the latter two are broken/racy or even disabled due to denial of service attacks. This patch introduces the concept of SEALING. If you seal a file, a specific set of operations is blocked on that file forever. Unlike locks, seals can only be set, never removed. Hence, once you verified a specific set of seals is set, you're guaranteed that no-one can perform the blocked operations on this file, anymore. An initial set of SEALS is introduced by this patch: - SHRINK: If SEAL_SHRINK is set, the file in question cannot be reduced in size. This affects ftruncate() and open(O_TRUNC). - GROW: If SEAL_GROW is set, the file in question cannot be increased in size. This affects ftruncate(), fallocate() and write(). - WRITE: If SEAL_WRITE is set, no write operations (besides resizing) are possible. This affects fallocate(PUNCH_HOLE), mmap() and write(). - SEAL: If SEAL_SEAL is set, no further seals can be added to a file. This basically prevents the F_ADD_SEAL operation on a file and can be set to prevent others from adding further seals that you don't want. The described use-cases can easily use these seals to provide safe use without any trust-relationship: 1) The graphics server can verify that a passed file-descriptor has SEAL_SHRINK set. This allows safe scanout, while the client is allowed to increase buffer size for window-resizing on-the-fly. Concurrent writes are explicitly allowed. 2) For general-purpose IPC, both processes can verify that SEAL_SHRINK, SEAL_GROW and SEAL_WRITE are set. This guarantees that neither process can modify the data while the other side parses it. Furthermore, it guarantees that even with writable FDs passed to the peer, it cannot increase the size to hit memory-limits of the source process (in case the file-storage is accounted to the source). The new API is an extension to fcntl(), adding two new commands: F_GET_SEALS: Return a bitset describing the seals on the file. This can be called on any FD if the underlying file supports sealing. F_ADD_SEALS: Change the seals of a given file. This requires WRITE access to the file and F_SEAL_SEAL may not already be set. Furthermore, the underlying file must support sealing and there may not be any existing shared mapping of that file. Otherwise, EBADF/EPERM is returned. The given seals are _added_ to the existing set of seals on the file. You cannot remove seals again. The fcntl() handler is currently specific to shmem and disabled on all files. A file needs to explicitly support sealing for this interface to work. A separate syscall is added in a follow-up, which creates files that support sealing. There is no intention to support this on other file-systems. Semantics are unclear for non-volatile files and we lack any use-case right now. Therefore, the implementation is specific to shmem. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ryan Lortie <desrt@desrt.ca> Cc: Lennart Poettering <lennart@poettering.net> Cc: Daniel Mack <zonque@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 04:25:27 +07:00
return -EPERM;
if ((info->seals & F_SEAL_GROW) && pos + len > inode->i_size)
return -EPERM;
}
return shmem_getpage(inode, index, pagep, SGP_WRITE);
}
static int
shmem_write_end(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned copied,
struct page *page, void *fsdata)
{
struct inode *inode = mapping->host;
if (pos + copied > inode->i_size)
i_size_write(inode, pos + copied);
if (!PageUptodate(page)) {
struct page *head = compound_head(page);
if (PageTransCompound(page)) {
int i;
for (i = 0; i < HPAGE_PMD_NR; i++) {
if (head + i == page)
continue;
clear_highpage(head + i);
flush_dcache_page(head + i);
}
}
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
if (copied < PAGE_SIZE) {
unsigned from = pos & (PAGE_SIZE - 1);
zero_user_segments(page, 0, from,
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
from + copied, PAGE_SIZE);
}
SetPageUptodate(head);
}
set_page_dirty(page);
unlock_page(page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
put_page(page);
return copied;
}
static ssize_t shmem_file_read_iter(struct kiocb *iocb, struct iov_iter *to)
{
struct file *file = iocb->ki_filp;
struct inode *inode = file_inode(file);
struct address_space *mapping = inode->i_mapping;
pgoff_t index;
unsigned long offset;
enum sgp_type sgp = SGP_READ;
int error = 0;
ssize_t retval = 0;
loff_t *ppos = &iocb->ki_pos;
/*
* Might this read be for a stacking filesystem? Then when reading
* holes of a sparse file, we actually need to allocate those pages,
* and even mark them dirty, so it cannot exceed the max_blocks limit.
*/
if (!iter_is_iovec(to))
tmpfs: preliminary minor tidyups Make a few cleanups in mm/shmem.c, before going on to complicate it. shmem_alloc_page() will become more complicated: we can't afford to to have that complication duplicated between a CONFIG_NUMA version and a !CONFIG_NUMA version, so rearrange the #ifdef'ery there to yield a single shmem_swapin() and a single shmem_alloc_page(). Yes, it's a shame to inflict the horrid pseudo-vma on non-NUMA configurations, but eliminating it is a larger cleanup: I have an alloc_pages_mpol() patchset not yet ready - mpol handling is subtle and bug-prone, and changed yet again since my last version. Move __SetPageLocked, __SetPageSwapBacked from shmem_getpage_gfp() to shmem_alloc_page(): that SwapBacked flag will be useful in future, to help to distinguish different cases appropriately. And the SGP_DIRTY variant of SGP_CACHE is hard to understand and of little use (IIRC it dates back to when shmem_getpage() returned the page unlocked): kill it and do the necessary in shmem_file_read_iter(). But an arm64 build then complained that info may be uninitialized (where shmem_getpage_gfp() deletes a freshly alloced page beyond eof), and advancing to an "sgp <= SGP_CACHE" test jogged it back to reality. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Yang Shi <yang.shi@linaro.org> Cc: Ning Qu <quning@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 07:12:44 +07:00
sgp = SGP_CACHE;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
index = *ppos >> PAGE_SHIFT;
offset = *ppos & ~PAGE_MASK;
for (;;) {
struct page *page = NULL;
pgoff_t end_index;
unsigned long nr, ret;
loff_t i_size = i_size_read(inode);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
end_index = i_size >> PAGE_SHIFT;
if (index > end_index)
break;
if (index == end_index) {
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
nr = i_size & ~PAGE_MASK;
if (nr <= offset)
break;
}
error = shmem_getpage(inode, index, &page, sgp);
if (error) {
if (error == -EINVAL)
error = 0;
break;
}
tmpfs: preliminary minor tidyups Make a few cleanups in mm/shmem.c, before going on to complicate it. shmem_alloc_page() will become more complicated: we can't afford to to have that complication duplicated between a CONFIG_NUMA version and a !CONFIG_NUMA version, so rearrange the #ifdef'ery there to yield a single shmem_swapin() and a single shmem_alloc_page(). Yes, it's a shame to inflict the horrid pseudo-vma on non-NUMA configurations, but eliminating it is a larger cleanup: I have an alloc_pages_mpol() patchset not yet ready - mpol handling is subtle and bug-prone, and changed yet again since my last version. Move __SetPageLocked, __SetPageSwapBacked from shmem_getpage_gfp() to shmem_alloc_page(): that SwapBacked flag will be useful in future, to help to distinguish different cases appropriately. And the SGP_DIRTY variant of SGP_CACHE is hard to understand and of little use (IIRC it dates back to when shmem_getpage() returned the page unlocked): kill it and do the necessary in shmem_file_read_iter(). But an arm64 build then complained that info may be uninitialized (where shmem_getpage_gfp() deletes a freshly alloced page beyond eof), and advancing to an "sgp <= SGP_CACHE" test jogged it back to reality. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Yang Shi <yang.shi@linaro.org> Cc: Ning Qu <quning@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 07:12:44 +07:00
if (page) {
if (sgp == SGP_CACHE)
set_page_dirty(page);
unlock_page(page);
tmpfs: preliminary minor tidyups Make a few cleanups in mm/shmem.c, before going on to complicate it. shmem_alloc_page() will become more complicated: we can't afford to to have that complication duplicated between a CONFIG_NUMA version and a !CONFIG_NUMA version, so rearrange the #ifdef'ery there to yield a single shmem_swapin() and a single shmem_alloc_page(). Yes, it's a shame to inflict the horrid pseudo-vma on non-NUMA configurations, but eliminating it is a larger cleanup: I have an alloc_pages_mpol() patchset not yet ready - mpol handling is subtle and bug-prone, and changed yet again since my last version. Move __SetPageLocked, __SetPageSwapBacked from shmem_getpage_gfp() to shmem_alloc_page(): that SwapBacked flag will be useful in future, to help to distinguish different cases appropriately. And the SGP_DIRTY variant of SGP_CACHE is hard to understand and of little use (IIRC it dates back to when shmem_getpage() returned the page unlocked): kill it and do the necessary in shmem_file_read_iter(). But an arm64 build then complained that info may be uninitialized (where shmem_getpage_gfp() deletes a freshly alloced page beyond eof), and advancing to an "sgp <= SGP_CACHE" test jogged it back to reality. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Yang Shi <yang.shi@linaro.org> Cc: Ning Qu <quning@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 07:12:44 +07:00
}
/*
* We must evaluate after, since reads (unlike writes)
* are called without i_mutex protection against truncate
*/
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
nr = PAGE_SIZE;
i_size = i_size_read(inode);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
end_index = i_size >> PAGE_SHIFT;
if (index == end_index) {
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
nr = i_size & ~PAGE_MASK;
if (nr <= offset) {
if (page)
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
put_page(page);
break;
}
}
nr -= offset;
if (page) {
/*
* If users can be writing to this page using arbitrary
* virtual addresses, take care about potential aliasing
* before reading the page on the kernel side.
*/
if (mapping_writably_mapped(mapping))
flush_dcache_page(page);
/*
* Mark the page accessed if we read the beginning.
*/
if (!offset)
mark_page_accessed(page);
2005-10-30 08:16:12 +07:00
} else {
page = ZERO_PAGE(0);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
get_page(page);
2005-10-30 08:16:12 +07:00
}
/*
* Ok, we have the page, and it's up-to-date, so
* now we can copy it to user space...
*/
ret = copy_page_to_iter(page, offset, nr, to);
retval += ret;
offset += ret;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
index += offset >> PAGE_SHIFT;
offset &= ~PAGE_MASK;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
put_page(page);
if (!iov_iter_count(to))
break;
if (ret < nr) {
error = -EFAULT;
break;
}
cond_resched();
}
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
*ppos = ((loff_t) index << PAGE_SHIFT) + offset;
file_accessed(file);
return retval ? retval : error;
}
/*
* llseek SEEK_DATA or SEEK_HOLE through the page cache.
*/
static pgoff_t shmem_seek_hole_data(struct address_space *mapping,
pgoff_t index, pgoff_t end, int whence)
{
struct page *page;
struct pagevec pvec;
pgoff_t indices[PAGEVEC_SIZE];
bool done = false;
int i;
pagevec_init(&pvec);
pvec.nr = 1; /* start small: we may be there already */
while (!done) {
2014-04-04 04:47:46 +07:00
pvec.nr = find_get_entries(mapping, index,
pvec.nr, pvec.pages, indices);
if (!pvec.nr) {
if (whence == SEEK_DATA)
index = end;
break;
}
for (i = 0; i < pvec.nr; i++, index++) {
if (index < indices[i]) {
if (whence == SEEK_HOLE) {
done = true;
break;
}
index = indices[i];
}
page = pvec.pages[i];
if (page && !xa_is_value(page)) {
if (!PageUptodate(page))
page = NULL;
}
if (index >= end ||
(page && whence == SEEK_DATA) ||
(!page && whence == SEEK_HOLE)) {
done = true;
break;
}
}
2014-04-04 04:47:46 +07:00
pagevec_remove_exceptionals(&pvec);
pagevec_release(&pvec);
pvec.nr = PAGEVEC_SIZE;
cond_resched();
}
return index;
}
static loff_t shmem_file_llseek(struct file *file, loff_t offset, int whence)
{
struct address_space *mapping = file->f_mapping;
struct inode *inode = mapping->host;
pgoff_t start, end;
loff_t new_offset;
if (whence != SEEK_DATA && whence != SEEK_HOLE)
return generic_file_llseek_size(file, offset, whence,
MAX_LFS_FILESIZE, i_size_read(inode));
inode_lock(inode);
/* We're holding i_mutex so we can access i_size directly */
if (offset < 0 || offset >= inode->i_size)
offset = -ENXIO;
else {
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
start = offset >> PAGE_SHIFT;
end = (inode->i_size + PAGE_SIZE - 1) >> PAGE_SHIFT;
new_offset = shmem_seek_hole_data(mapping, start, end, whence);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
new_offset <<= PAGE_SHIFT;
if (new_offset > offset) {
if (new_offset < inode->i_size)
offset = new_offset;
else if (whence == SEEK_DATA)
offset = -ENXIO;
else
offset = inode->i_size;
}
}
if (offset >= 0)
offset = vfs_setpos(file, offset, MAX_LFS_FILESIZE);
inode_unlock(inode);
return offset;
}
static long shmem_fallocate(struct file *file, int mode, loff_t offset,
loff_t len)
{
struct inode *inode = file_inode(file);
tmpfs: support fallocate preallocation The systemd plumbers expressed a wish that tmpfs support preallocation. Cong Wang wrote a patch, but several kernel guys expressed scepticism: https://lkml.org/lkml/2011/11/18/137 Christoph Hellwig: What for exactly? Please explain why preallocating on tmpfs would make any sense. Kay Sievers: To be able to safely use mmap(), regarding SIGBUS, on files on the /dev/shm filesystem. The glibc fallback loop for -ENOSYS [or -EOPNOTSUPP] on fallocate is just ugly. Hugh Dickins: If tmpfs is going to support fallocate(FALLOC_FL_PUNCH_HOLE), it would seem perverse to permit the deallocation but fail the allocation. Christoph Hellwig: Agreed. Now that we do have shmem_fallocate() for hole-punching, plumb in basic support for preallocation mode too. It's fairly straightforward (though quite a few details needed attention), except for when it fails part way through. What a pity that fallocate(2) was not specified to return the length allocated, permitting short fallocations! As it is, when it fails part way through, we ought to free what has just been allocated by this system call; but must be very sure not to free any allocated earlier, or any allocated by racing accesses (not all excluded by i_mutex). But we cannot distinguish them: so in this patch simply leak allocations on partial failure (they will be freed later if the file is removed). An attractive alternative approach would have been for fallocate() not to allocate pages at all, but note reservations by entries in the radix-tree. But that would give less assurance, and, critically, would be hard to fit with mem cgroups (who owns the reservations?): allocating pages lets fallocate() behave in just the same way as write(). Based-on-patch-by: Cong Wang <amwang@redhat.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Cong Wang <amwang@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:41 +07:00
struct shmem_sb_info *sbinfo = SHMEM_SB(inode->i_sb);
shm: add sealing API If two processes share a common memory region, they usually want some guarantees to allow safe access. This often includes: - one side cannot overwrite data while the other reads it - one side cannot shrink the buffer while the other accesses it - one side cannot grow the buffer beyond previously set boundaries If there is a trust-relationship between both parties, there is no need for policy enforcement. However, if there's no trust relationship (eg., for general-purpose IPC) sharing memory-regions is highly fragile and often not possible without local copies. Look at the following two use-cases: 1) A graphics client wants to share its rendering-buffer with a graphics-server. The memory-region is allocated by the client for read/write access and a second FD is passed to the server. While scanning out from the memory region, the server has no guarantee that the client doesn't shrink the buffer at any time, requiring rather cumbersome SIGBUS handling. 2) A process wants to perform an RPC on another process. To avoid huge bandwidth consumption, zero-copy is preferred. After a message is assembled in-memory and a FD is passed to the remote side, both sides want to be sure that neither modifies this shared copy, anymore. The source may have put sensible data into the message without a separate copy and the target may want to parse the message inline, to avoid a local copy. While SIGBUS handling, POSIX mandatory locking and MAP_DENYWRITE provide ways to achieve most of this, the first one is unproportionally ugly to use in libraries and the latter two are broken/racy or even disabled due to denial of service attacks. This patch introduces the concept of SEALING. If you seal a file, a specific set of operations is blocked on that file forever. Unlike locks, seals can only be set, never removed. Hence, once you verified a specific set of seals is set, you're guaranteed that no-one can perform the blocked operations on this file, anymore. An initial set of SEALS is introduced by this patch: - SHRINK: If SEAL_SHRINK is set, the file in question cannot be reduced in size. This affects ftruncate() and open(O_TRUNC). - GROW: If SEAL_GROW is set, the file in question cannot be increased in size. This affects ftruncate(), fallocate() and write(). - WRITE: If SEAL_WRITE is set, no write operations (besides resizing) are possible. This affects fallocate(PUNCH_HOLE), mmap() and write(). - SEAL: If SEAL_SEAL is set, no further seals can be added to a file. This basically prevents the F_ADD_SEAL operation on a file and can be set to prevent others from adding further seals that you don't want. The described use-cases can easily use these seals to provide safe use without any trust-relationship: 1) The graphics server can verify that a passed file-descriptor has SEAL_SHRINK set. This allows safe scanout, while the client is allowed to increase buffer size for window-resizing on-the-fly. Concurrent writes are explicitly allowed. 2) For general-purpose IPC, both processes can verify that SEAL_SHRINK, SEAL_GROW and SEAL_WRITE are set. This guarantees that neither process can modify the data while the other side parses it. Furthermore, it guarantees that even with writable FDs passed to the peer, it cannot increase the size to hit memory-limits of the source process (in case the file-storage is accounted to the source). The new API is an extension to fcntl(), adding two new commands: F_GET_SEALS: Return a bitset describing the seals on the file. This can be called on any FD if the underlying file supports sealing. F_ADD_SEALS: Change the seals of a given file. This requires WRITE access to the file and F_SEAL_SEAL may not already be set. Furthermore, the underlying file must support sealing and there may not be any existing shared mapping of that file. Otherwise, EBADF/EPERM is returned. The given seals are _added_ to the existing set of seals on the file. You cannot remove seals again. The fcntl() handler is currently specific to shmem and disabled on all files. A file needs to explicitly support sealing for this interface to work. A separate syscall is added in a follow-up, which creates files that support sealing. There is no intention to support this on other file-systems. Semantics are unclear for non-volatile files and we lack any use-case right now. Therefore, the implementation is specific to shmem. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ryan Lortie <desrt@desrt.ca> Cc: Lennart Poettering <lennart@poettering.net> Cc: Daniel Mack <zonque@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 04:25:27 +07:00
struct shmem_inode_info *info = SHMEM_I(inode);
tmpfs: quit when fallocate fills memory As it stands, a large fallocate() on tmpfs is liable to fill memory with pages, freed on failure except when they run into swap, at which point they become fixed into the file despite the failure. That feels quite wrong, to be consuming resources precisely when they're in short supply. Go the other way instead: shmem_fallocate() indicate the range it has fallocated to shmem_writepage(), keeping count of pages it's allocating; shmem_writepage() reactivate instead of swapping out pages fallocated by this syscall (but happily swap out those from earlier occasions), keeping count; shmem_fallocate() compare counts and give up once the reactivated pages have started to coming back to writepage (approximately: some zones would in fact recycle faster than others). This is a little unusual, but works well: although we could consider the failure to swap as a bug, and fix it later with SWAP_MAP_FALLOC handling added in swapfile.c and memcontrol.c, I doubt that we shall ever want to. (If there's no swap, an over-large fallocate() on tmpfs is limited in the same way as writing: stopped by rlimit, or by tmpfs mount size if that was set sensibly, or by __vm_enough_memory() heuristics if OVERCOMMIT_GUESS or OVERCOMMIT_NEVER. If OVERCOMMIT_ALWAYS, then it is liable to OOM-kill others as writing would, but stops and frees if interrupted.) Now that everything is freed on failure, we can then skip updating ctime. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Cong Wang <amwang@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:42 +07:00
struct shmem_falloc shmem_falloc;
tmpfs: support fallocate preallocation The systemd plumbers expressed a wish that tmpfs support preallocation. Cong Wang wrote a patch, but several kernel guys expressed scepticism: https://lkml.org/lkml/2011/11/18/137 Christoph Hellwig: What for exactly? Please explain why preallocating on tmpfs would make any sense. Kay Sievers: To be able to safely use mmap(), regarding SIGBUS, on files on the /dev/shm filesystem. The glibc fallback loop for -ENOSYS [or -EOPNOTSUPP] on fallocate is just ugly. Hugh Dickins: If tmpfs is going to support fallocate(FALLOC_FL_PUNCH_HOLE), it would seem perverse to permit the deallocation but fail the allocation. Christoph Hellwig: Agreed. Now that we do have shmem_fallocate() for hole-punching, plumb in basic support for preallocation mode too. It's fairly straightforward (though quite a few details needed attention), except for when it fails part way through. What a pity that fallocate(2) was not specified to return the length allocated, permitting short fallocations! As it is, when it fails part way through, we ought to free what has just been allocated by this system call; but must be very sure not to free any allocated earlier, or any allocated by racing accesses (not all excluded by i_mutex). But we cannot distinguish them: so in this patch simply leak allocations on partial failure (they will be freed later if the file is removed). An attractive alternative approach would have been for fallocate() not to allocate pages at all, but note reservations by entries in the radix-tree. But that would give less assurance, and, critically, would be hard to fit with mem cgroups (who owns the reservations?): allocating pages lets fallocate() behave in just the same way as write(). Based-on-patch-by: Cong Wang <amwang@redhat.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Cong Wang <amwang@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:41 +07:00
pgoff_t start, index, end;
int error;
if (mode & ~(FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE))
return -EOPNOTSUPP;
inode_lock(inode);
if (mode & FALLOC_FL_PUNCH_HOLE) {
struct address_space *mapping = file->f_mapping;
loff_t unmap_start = round_up(offset, PAGE_SIZE);
loff_t unmap_end = round_down(offset + len, PAGE_SIZE) - 1;
shmem: fix faulting into a hole, not taking i_mutex Commit f00cdc6df7d7 ("shmem: fix faulting into a hole while it's punched") was buggy: Sasha sent a lockdep report to remind us that grabbing i_mutex in the fault path is a no-no (write syscall may already hold i_mutex while faulting user buffer). We tried a completely different approach (see following patch) but that proved inadequate: good enough for a rational workload, but not good enough against trinity - which forks off so many mappings of the object that contention on i_mmap_mutex while hole-puncher holds i_mutex builds into serious starvation when concurrent faults force the puncher to fall back to single-page unmap_mapping_range() searches of the i_mmap tree. So return to the original umbrella approach, but keep away from i_mutex this time. We really don't want to bloat every shmem inode with a new mutex or completion, just to protect this unlikely case from trinity. So extend the original with wait_queue_head on stack at the hole-punch end, and wait_queue item on the stack at the fault end. This involves further use of i_lock to guard against the races: lockdep has been happy so far, and I see fs/inode.c:unlock_new_inode() holds i_lock around wake_up_bit(), which is comparable to what we do here. i_lock is more convenient, but we could switch to shmem's info->lock. This issue has been tagged with CVE-2014-4171, which will require commit f00cdc6df7d7 and this and the following patch to be backported: we suggest to 3.1+, though in fact the trinity forkbomb effect might go back as far as 2.6.16, when madvise(,,MADV_REMOVE) came in - or might not, since much has changed, with i_mmap_mutex a spinlock before 3.0. Anyone running trinity on 3.0 and earlier? I don't think we need care. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lukas Czerner <lczerner@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: <stable@vger.kernel.org> [3.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-24 04:00:10 +07:00
DECLARE_WAIT_QUEUE_HEAD_ONSTACK(shmem_falloc_waitq);
shm: add sealing API If two processes share a common memory region, they usually want some guarantees to allow safe access. This often includes: - one side cannot overwrite data while the other reads it - one side cannot shrink the buffer while the other accesses it - one side cannot grow the buffer beyond previously set boundaries If there is a trust-relationship between both parties, there is no need for policy enforcement. However, if there's no trust relationship (eg., for general-purpose IPC) sharing memory-regions is highly fragile and often not possible without local copies. Look at the following two use-cases: 1) A graphics client wants to share its rendering-buffer with a graphics-server. The memory-region is allocated by the client for read/write access and a second FD is passed to the server. While scanning out from the memory region, the server has no guarantee that the client doesn't shrink the buffer at any time, requiring rather cumbersome SIGBUS handling. 2) A process wants to perform an RPC on another process. To avoid huge bandwidth consumption, zero-copy is preferred. After a message is assembled in-memory and a FD is passed to the remote side, both sides want to be sure that neither modifies this shared copy, anymore. The source may have put sensible data into the message without a separate copy and the target may want to parse the message inline, to avoid a local copy. While SIGBUS handling, POSIX mandatory locking and MAP_DENYWRITE provide ways to achieve most of this, the first one is unproportionally ugly to use in libraries and the latter two are broken/racy or even disabled due to denial of service attacks. This patch introduces the concept of SEALING. If you seal a file, a specific set of operations is blocked on that file forever. Unlike locks, seals can only be set, never removed. Hence, once you verified a specific set of seals is set, you're guaranteed that no-one can perform the blocked operations on this file, anymore. An initial set of SEALS is introduced by this patch: - SHRINK: If SEAL_SHRINK is set, the file in question cannot be reduced in size. This affects ftruncate() and open(O_TRUNC). - GROW: If SEAL_GROW is set, the file in question cannot be increased in size. This affects ftruncate(), fallocate() and write(). - WRITE: If SEAL_WRITE is set, no write operations (besides resizing) are possible. This affects fallocate(PUNCH_HOLE), mmap() and write(). - SEAL: If SEAL_SEAL is set, no further seals can be added to a file. This basically prevents the F_ADD_SEAL operation on a file and can be set to prevent others from adding further seals that you don't want. The described use-cases can easily use these seals to provide safe use without any trust-relationship: 1) The graphics server can verify that a passed file-descriptor has SEAL_SHRINK set. This allows safe scanout, while the client is allowed to increase buffer size for window-resizing on-the-fly. Concurrent writes are explicitly allowed. 2) For general-purpose IPC, both processes can verify that SEAL_SHRINK, SEAL_GROW and SEAL_WRITE are set. This guarantees that neither process can modify the data while the other side parses it. Furthermore, it guarantees that even with writable FDs passed to the peer, it cannot increase the size to hit memory-limits of the source process (in case the file-storage is accounted to the source). The new API is an extension to fcntl(), adding two new commands: F_GET_SEALS: Return a bitset describing the seals on the file. This can be called on any FD if the underlying file supports sealing. F_ADD_SEALS: Change the seals of a given file. This requires WRITE access to the file and F_SEAL_SEAL may not already be set. Furthermore, the underlying file must support sealing and there may not be any existing shared mapping of that file. Otherwise, EBADF/EPERM is returned. The given seals are _added_ to the existing set of seals on the file. You cannot remove seals again. The fcntl() handler is currently specific to shmem and disabled on all files. A file needs to explicitly support sealing for this interface to work. A separate syscall is added in a follow-up, which creates files that support sealing. There is no intention to support this on other file-systems. Semantics are unclear for non-volatile files and we lack any use-case right now. Therefore, the implementation is specific to shmem. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ryan Lortie <desrt@desrt.ca> Cc: Lennart Poettering <lennart@poettering.net> Cc: Daniel Mack <zonque@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 04:25:27 +07:00
/* protected by i_mutex */
mm/memfd: add an F_SEAL_FUTURE_WRITE seal to memfd Android uses ashmem for sharing memory regions. We are looking forward to migrating all usecases of ashmem to memfd so that we can possibly remove the ashmem driver in the future from staging while also benefiting from using memfd and contributing to it. Note staging drivers are also not ABI and generally can be removed at anytime. One of the main usecases Android has is the ability to create a region and mmap it as writeable, then add protection against making any "future" writes while keeping the existing already mmap'ed writeable-region active. This allows us to implement a usecase where receivers of the shared memory buffer can get a read-only view, while the sender continues to write to the buffer. See CursorWindow documentation in Android for more details: https://developer.android.com/reference/android/database/CursorWindow This usecase cannot be implemented with the existing F_SEAL_WRITE seal. To support the usecase, this patch adds a new F_SEAL_FUTURE_WRITE seal which prevents any future mmap and write syscalls from succeeding while keeping the existing mmap active. A better way to do F_SEAL_FUTURE_WRITE seal was discussed [1] last week where we don't need to modify core VFS structures to get the same behavior of the seal. This solves several side-effects pointed by Andy. self-tests are provided in later patch to verify the expected semantics. [1] https://lore.kernel.org/lkml/20181111173650.GA256781@google.com/ Thanks a lot to Andy for suggestions to improve code. Link: http://lkml.kernel.org/r/20190112203816.85534-2-joel@joelfernandes.org Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Acked-by: John Stultz <john.stultz@linaro.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: J. Bruce Fields <bfields@fieldses.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Marc-Andr Lureau <marcandre.lureau@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:54 +07:00
if (info->seals & (F_SEAL_WRITE | F_SEAL_FUTURE_WRITE)) {
shm: add sealing API If two processes share a common memory region, they usually want some guarantees to allow safe access. This often includes: - one side cannot overwrite data while the other reads it - one side cannot shrink the buffer while the other accesses it - one side cannot grow the buffer beyond previously set boundaries If there is a trust-relationship between both parties, there is no need for policy enforcement. However, if there's no trust relationship (eg., for general-purpose IPC) sharing memory-regions is highly fragile and often not possible without local copies. Look at the following two use-cases: 1) A graphics client wants to share its rendering-buffer with a graphics-server. The memory-region is allocated by the client for read/write access and a second FD is passed to the server. While scanning out from the memory region, the server has no guarantee that the client doesn't shrink the buffer at any time, requiring rather cumbersome SIGBUS handling. 2) A process wants to perform an RPC on another process. To avoid huge bandwidth consumption, zero-copy is preferred. After a message is assembled in-memory and a FD is passed to the remote side, both sides want to be sure that neither modifies this shared copy, anymore. The source may have put sensible data into the message without a separate copy and the target may want to parse the message inline, to avoid a local copy. While SIGBUS handling, POSIX mandatory locking and MAP_DENYWRITE provide ways to achieve most of this, the first one is unproportionally ugly to use in libraries and the latter two are broken/racy or even disabled due to denial of service attacks. This patch introduces the concept of SEALING. If you seal a file, a specific set of operations is blocked on that file forever. Unlike locks, seals can only be set, never removed. Hence, once you verified a specific set of seals is set, you're guaranteed that no-one can perform the blocked operations on this file, anymore. An initial set of SEALS is introduced by this patch: - SHRINK: If SEAL_SHRINK is set, the file in question cannot be reduced in size. This affects ftruncate() and open(O_TRUNC). - GROW: If SEAL_GROW is set, the file in question cannot be increased in size. This affects ftruncate(), fallocate() and write(). - WRITE: If SEAL_WRITE is set, no write operations (besides resizing) are possible. This affects fallocate(PUNCH_HOLE), mmap() and write(). - SEAL: If SEAL_SEAL is set, no further seals can be added to a file. This basically prevents the F_ADD_SEAL operation on a file and can be set to prevent others from adding further seals that you don't want. The described use-cases can easily use these seals to provide safe use without any trust-relationship: 1) The graphics server can verify that a passed file-descriptor has SEAL_SHRINK set. This allows safe scanout, while the client is allowed to increase buffer size for window-resizing on-the-fly. Concurrent writes are explicitly allowed. 2) For general-purpose IPC, both processes can verify that SEAL_SHRINK, SEAL_GROW and SEAL_WRITE are set. This guarantees that neither process can modify the data while the other side parses it. Furthermore, it guarantees that even with writable FDs passed to the peer, it cannot increase the size to hit memory-limits of the source process (in case the file-storage is accounted to the source). The new API is an extension to fcntl(), adding two new commands: F_GET_SEALS: Return a bitset describing the seals on the file. This can be called on any FD if the underlying file supports sealing. F_ADD_SEALS: Change the seals of a given file. This requires WRITE access to the file and F_SEAL_SEAL may not already be set. Furthermore, the underlying file must support sealing and there may not be any existing shared mapping of that file. Otherwise, EBADF/EPERM is returned. The given seals are _added_ to the existing set of seals on the file. You cannot remove seals again. The fcntl() handler is currently specific to shmem and disabled on all files. A file needs to explicitly support sealing for this interface to work. A separate syscall is added in a follow-up, which creates files that support sealing. There is no intention to support this on other file-systems. Semantics are unclear for non-volatile files and we lack any use-case right now. Therefore, the implementation is specific to shmem. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ryan Lortie <desrt@desrt.ca> Cc: Lennart Poettering <lennart@poettering.net> Cc: Daniel Mack <zonque@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 04:25:27 +07:00
error = -EPERM;
goto out;
}
shmem: fix faulting into a hole, not taking i_mutex Commit f00cdc6df7d7 ("shmem: fix faulting into a hole while it's punched") was buggy: Sasha sent a lockdep report to remind us that grabbing i_mutex in the fault path is a no-no (write syscall may already hold i_mutex while faulting user buffer). We tried a completely different approach (see following patch) but that proved inadequate: good enough for a rational workload, but not good enough against trinity - which forks off so many mappings of the object that contention on i_mmap_mutex while hole-puncher holds i_mutex builds into serious starvation when concurrent faults force the puncher to fall back to single-page unmap_mapping_range() searches of the i_mmap tree. So return to the original umbrella approach, but keep away from i_mutex this time. We really don't want to bloat every shmem inode with a new mutex or completion, just to protect this unlikely case from trinity. So extend the original with wait_queue_head on stack at the hole-punch end, and wait_queue item on the stack at the fault end. This involves further use of i_lock to guard against the races: lockdep has been happy so far, and I see fs/inode.c:unlock_new_inode() holds i_lock around wake_up_bit(), which is comparable to what we do here. i_lock is more convenient, but we could switch to shmem's info->lock. This issue has been tagged with CVE-2014-4171, which will require commit f00cdc6df7d7 and this and the following patch to be backported: we suggest to 3.1+, though in fact the trinity forkbomb effect might go back as far as 2.6.16, when madvise(,,MADV_REMOVE) came in - or might not, since much has changed, with i_mmap_mutex a spinlock before 3.0. Anyone running trinity on 3.0 and earlier? I don't think we need care. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lukas Czerner <lczerner@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: <stable@vger.kernel.org> [3.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-24 04:00:10 +07:00
shmem_falloc.waitq = &shmem_falloc_waitq;
mm/shmem.c: cast the type of unmap_start to u64 In 64bit system. sb->s_maxbytes of shmem filesystem is MAX_LFS_FILESIZE, which equal LLONG_MAX. If offset > LLONG_MAX - PAGE_SIZE, offset + len < LLONG_MAX in shmem_fallocate, which will pass the checking in vfs_fallocate. /* Check for wrap through zero too */ if (((offset + len) > inode->i_sb->s_maxbytes) || ((offset + len) < 0)) return -EFBIG; loff_t unmap_start = round_up(offset, PAGE_SIZE) in shmem_fallocate causes a overflow. Syzkaller reports a overflow problem in mm/shmem: UBSAN: Undefined behaviour in mm/shmem.c:2014:10 signed integer overflow: '9223372036854775807 + 1' cannot be represented in type 'long long int' CPU: 0 PID:17076 Comm: syz-executor0 Not tainted 4.1.46+ #1 Hardware name: linux, dummy-virt (DT) Call trace: dump_backtrace+0x0/0x2c8 arch/arm64/kernel/traps.c:100 show_stack+0x20/0x30 arch/arm64/kernel/traps.c:238 __dump_stack lib/dump_stack.c:15 [inline] ubsan_epilogue+0x18/0x70 lib/ubsan.c:164 handle_overflow+0x158/0x1b0 lib/ubsan.c:195 shmem_fallocate+0x6d0/0x820 mm/shmem.c:2104 vfs_fallocate+0x238/0x428 fs/open.c:312 SYSC_fallocate fs/open.c:335 [inline] SyS_fallocate+0x54/0xc8 fs/open.c:239 The highest bit of unmap_start will be appended with sign bit 1 (overflow) when calculate shmem_falloc.start: shmem_falloc.start = unmap_start >> PAGE_SHIFT. Fix it by casting the type of unmap_start to u64, when right shifted. This bug is found in LTS Linux 4.1. It also seems to exist in mainline. Link: http://lkml.kernel.org/r/1573867464-5107-1-git-send-email-chenjun102@huawei.com Signed-off-by: Chen Jun <chenjun102@huawei.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Hugh Dickins <hughd@google.com> Cc: Qian Cai <cai@lca.pw> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 08:58:11 +07:00
shmem_falloc.start = (u64)unmap_start >> PAGE_SHIFT;
shmem_falloc.next = (unmap_end + 1) >> PAGE_SHIFT;
spin_lock(&inode->i_lock);
inode->i_private = &shmem_falloc;
spin_unlock(&inode->i_lock);
if ((u64)unmap_end > (u64)unmap_start)
unmap_mapping_range(mapping, unmap_start,
1 + unmap_end - unmap_start, 0);
shmem_truncate_range(inode, offset, offset + len - 1);
/* No need to unmap again: hole-punching leaves COWed pages */
shmem: fix faulting into a hole, not taking i_mutex Commit f00cdc6df7d7 ("shmem: fix faulting into a hole while it's punched") was buggy: Sasha sent a lockdep report to remind us that grabbing i_mutex in the fault path is a no-no (write syscall may already hold i_mutex while faulting user buffer). We tried a completely different approach (see following patch) but that proved inadequate: good enough for a rational workload, but not good enough against trinity - which forks off so many mappings of the object that contention on i_mmap_mutex while hole-puncher holds i_mutex builds into serious starvation when concurrent faults force the puncher to fall back to single-page unmap_mapping_range() searches of the i_mmap tree. So return to the original umbrella approach, but keep away from i_mutex this time. We really don't want to bloat every shmem inode with a new mutex or completion, just to protect this unlikely case from trinity. So extend the original with wait_queue_head on stack at the hole-punch end, and wait_queue item on the stack at the fault end. This involves further use of i_lock to guard against the races: lockdep has been happy so far, and I see fs/inode.c:unlock_new_inode() holds i_lock around wake_up_bit(), which is comparable to what we do here. i_lock is more convenient, but we could switch to shmem's info->lock. This issue has been tagged with CVE-2014-4171, which will require commit f00cdc6df7d7 and this and the following patch to be backported: we suggest to 3.1+, though in fact the trinity forkbomb effect might go back as far as 2.6.16, when madvise(,,MADV_REMOVE) came in - or might not, since much has changed, with i_mmap_mutex a spinlock before 3.0. Anyone running trinity on 3.0 and earlier? I don't think we need care. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lukas Czerner <lczerner@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: <stable@vger.kernel.org> [3.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-24 04:00:10 +07:00
spin_lock(&inode->i_lock);
inode->i_private = NULL;
wake_up_all(&shmem_falloc_waitq);
sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list naming So I've noticed a number of instances where it was not obvious from the code whether ->task_list was for a wait-queue head or a wait-queue entry. Furthermore, there's a number of wait-queue users where the lists are not for 'tasks' but other entities (poll tables, etc.), in which case the 'task_list' name is actively confusing. To clear this all up, name the wait-queue head and entry list structure fields unambiguously: struct wait_queue_head::task_list => ::head struct wait_queue_entry::task_list => ::entry For example, this code: rqw->wait.task_list.next != &wait->task_list ... is was pretty unclear (to me) what it's doing, while now it's written this way: rqw->wait.head.next != &wait->entry ... which makes it pretty clear that we are iterating a list until we see the head. Other examples are: list_for_each_entry_safe(pos, next, &x->task_list, task_list) { list_for_each_entry(wq, &fence->wait.task_list, task_list) { ... where it's unclear (to me) what we are iterating, and during review it's hard to tell whether it's trying to walk a wait-queue entry (which would be a bug), while now it's written as: list_for_each_entry_safe(pos, next, &x->head, entry) { list_for_each_entry(wq, &fence->wait.head, entry) { Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20 17:06:46 +07:00
WARN_ON_ONCE(!list_empty(&shmem_falloc_waitq.head));
shmem: fix faulting into a hole, not taking i_mutex Commit f00cdc6df7d7 ("shmem: fix faulting into a hole while it's punched") was buggy: Sasha sent a lockdep report to remind us that grabbing i_mutex in the fault path is a no-no (write syscall may already hold i_mutex while faulting user buffer). We tried a completely different approach (see following patch) but that proved inadequate: good enough for a rational workload, but not good enough against trinity - which forks off so many mappings of the object that contention on i_mmap_mutex while hole-puncher holds i_mutex builds into serious starvation when concurrent faults force the puncher to fall back to single-page unmap_mapping_range() searches of the i_mmap tree. So return to the original umbrella approach, but keep away from i_mutex this time. We really don't want to bloat every shmem inode with a new mutex or completion, just to protect this unlikely case from trinity. So extend the original with wait_queue_head on stack at the hole-punch end, and wait_queue item on the stack at the fault end. This involves further use of i_lock to guard against the races: lockdep has been happy so far, and I see fs/inode.c:unlock_new_inode() holds i_lock around wake_up_bit(), which is comparable to what we do here. i_lock is more convenient, but we could switch to shmem's info->lock. This issue has been tagged with CVE-2014-4171, which will require commit f00cdc6df7d7 and this and the following patch to be backported: we suggest to 3.1+, though in fact the trinity forkbomb effect might go back as far as 2.6.16, when madvise(,,MADV_REMOVE) came in - or might not, since much has changed, with i_mmap_mutex a spinlock before 3.0. Anyone running trinity on 3.0 and earlier? I don't think we need care. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lukas Czerner <lczerner@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: <stable@vger.kernel.org> [3.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-24 04:00:10 +07:00
spin_unlock(&inode->i_lock);
error = 0;
shmem: fix faulting into a hole, not taking i_mutex Commit f00cdc6df7d7 ("shmem: fix faulting into a hole while it's punched") was buggy: Sasha sent a lockdep report to remind us that grabbing i_mutex in the fault path is a no-no (write syscall may already hold i_mutex while faulting user buffer). We tried a completely different approach (see following patch) but that proved inadequate: good enough for a rational workload, but not good enough against trinity - which forks off so many mappings of the object that contention on i_mmap_mutex while hole-puncher holds i_mutex builds into serious starvation when concurrent faults force the puncher to fall back to single-page unmap_mapping_range() searches of the i_mmap tree. So return to the original umbrella approach, but keep away from i_mutex this time. We really don't want to bloat every shmem inode with a new mutex or completion, just to protect this unlikely case from trinity. So extend the original with wait_queue_head on stack at the hole-punch end, and wait_queue item on the stack at the fault end. This involves further use of i_lock to guard against the races: lockdep has been happy so far, and I see fs/inode.c:unlock_new_inode() holds i_lock around wake_up_bit(), which is comparable to what we do here. i_lock is more convenient, but we could switch to shmem's info->lock. This issue has been tagged with CVE-2014-4171, which will require commit f00cdc6df7d7 and this and the following patch to be backported: we suggest to 3.1+, though in fact the trinity forkbomb effect might go back as far as 2.6.16, when madvise(,,MADV_REMOVE) came in - or might not, since much has changed, with i_mmap_mutex a spinlock before 3.0. Anyone running trinity on 3.0 and earlier? I don't think we need care. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lukas Czerner <lczerner@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: <stable@vger.kernel.org> [3.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-24 04:00:10 +07:00
goto out;
tmpfs: support fallocate preallocation The systemd plumbers expressed a wish that tmpfs support preallocation. Cong Wang wrote a patch, but several kernel guys expressed scepticism: https://lkml.org/lkml/2011/11/18/137 Christoph Hellwig: What for exactly? Please explain why preallocating on tmpfs would make any sense. Kay Sievers: To be able to safely use mmap(), regarding SIGBUS, on files on the /dev/shm filesystem. The glibc fallback loop for -ENOSYS [or -EOPNOTSUPP] on fallocate is just ugly. Hugh Dickins: If tmpfs is going to support fallocate(FALLOC_FL_PUNCH_HOLE), it would seem perverse to permit the deallocation but fail the allocation. Christoph Hellwig: Agreed. Now that we do have shmem_fallocate() for hole-punching, plumb in basic support for preallocation mode too. It's fairly straightforward (though quite a few details needed attention), except for when it fails part way through. What a pity that fallocate(2) was not specified to return the length allocated, permitting short fallocations! As it is, when it fails part way through, we ought to free what has just been allocated by this system call; but must be very sure not to free any allocated earlier, or any allocated by racing accesses (not all excluded by i_mutex). But we cannot distinguish them: so in this patch simply leak allocations on partial failure (they will be freed later if the file is removed). An attractive alternative approach would have been for fallocate() not to allocate pages at all, but note reservations by entries in the radix-tree. But that would give less assurance, and, critically, would be hard to fit with mem cgroups (who owns the reservations?): allocating pages lets fallocate() behave in just the same way as write(). Based-on-patch-by: Cong Wang <amwang@redhat.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Cong Wang <amwang@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:41 +07:00
}
/* We need to check rlimit even when FALLOC_FL_KEEP_SIZE */
error = inode_newsize_ok(inode, offset + len);
if (error)
goto out;
shm: add sealing API If two processes share a common memory region, they usually want some guarantees to allow safe access. This often includes: - one side cannot overwrite data while the other reads it - one side cannot shrink the buffer while the other accesses it - one side cannot grow the buffer beyond previously set boundaries If there is a trust-relationship between both parties, there is no need for policy enforcement. However, if there's no trust relationship (eg., for general-purpose IPC) sharing memory-regions is highly fragile and often not possible without local copies. Look at the following two use-cases: 1) A graphics client wants to share its rendering-buffer with a graphics-server. The memory-region is allocated by the client for read/write access and a second FD is passed to the server. While scanning out from the memory region, the server has no guarantee that the client doesn't shrink the buffer at any time, requiring rather cumbersome SIGBUS handling. 2) A process wants to perform an RPC on another process. To avoid huge bandwidth consumption, zero-copy is preferred. After a message is assembled in-memory and a FD is passed to the remote side, both sides want to be sure that neither modifies this shared copy, anymore. The source may have put sensible data into the message without a separate copy and the target may want to parse the message inline, to avoid a local copy. While SIGBUS handling, POSIX mandatory locking and MAP_DENYWRITE provide ways to achieve most of this, the first one is unproportionally ugly to use in libraries and the latter two are broken/racy or even disabled due to denial of service attacks. This patch introduces the concept of SEALING. If you seal a file, a specific set of operations is blocked on that file forever. Unlike locks, seals can only be set, never removed. Hence, once you verified a specific set of seals is set, you're guaranteed that no-one can perform the blocked operations on this file, anymore. An initial set of SEALS is introduced by this patch: - SHRINK: If SEAL_SHRINK is set, the file in question cannot be reduced in size. This affects ftruncate() and open(O_TRUNC). - GROW: If SEAL_GROW is set, the file in question cannot be increased in size. This affects ftruncate(), fallocate() and write(). - WRITE: If SEAL_WRITE is set, no write operations (besides resizing) are possible. This affects fallocate(PUNCH_HOLE), mmap() and write(). - SEAL: If SEAL_SEAL is set, no further seals can be added to a file. This basically prevents the F_ADD_SEAL operation on a file and can be set to prevent others from adding further seals that you don't want. The described use-cases can easily use these seals to provide safe use without any trust-relationship: 1) The graphics server can verify that a passed file-descriptor has SEAL_SHRINK set. This allows safe scanout, while the client is allowed to increase buffer size for window-resizing on-the-fly. Concurrent writes are explicitly allowed. 2) For general-purpose IPC, both processes can verify that SEAL_SHRINK, SEAL_GROW and SEAL_WRITE are set. This guarantees that neither process can modify the data while the other side parses it. Furthermore, it guarantees that even with writable FDs passed to the peer, it cannot increase the size to hit memory-limits of the source process (in case the file-storage is accounted to the source). The new API is an extension to fcntl(), adding two new commands: F_GET_SEALS: Return a bitset describing the seals on the file. This can be called on any FD if the underlying file supports sealing. F_ADD_SEALS: Change the seals of a given file. This requires WRITE access to the file and F_SEAL_SEAL may not already be set. Furthermore, the underlying file must support sealing and there may not be any existing shared mapping of that file. Otherwise, EBADF/EPERM is returned. The given seals are _added_ to the existing set of seals on the file. You cannot remove seals again. The fcntl() handler is currently specific to shmem and disabled on all files. A file needs to explicitly support sealing for this interface to work. A separate syscall is added in a follow-up, which creates files that support sealing. There is no intention to support this on other file-systems. Semantics are unclear for non-volatile files and we lack any use-case right now. Therefore, the implementation is specific to shmem. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ryan Lortie <desrt@desrt.ca> Cc: Lennart Poettering <lennart@poettering.net> Cc: Daniel Mack <zonque@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 04:25:27 +07:00
if ((info->seals & F_SEAL_GROW) && offset + len > inode->i_size) {
error = -EPERM;
goto out;
}
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
start = offset >> PAGE_SHIFT;
end = (offset + len + PAGE_SIZE - 1) >> PAGE_SHIFT;
tmpfs: support fallocate preallocation The systemd plumbers expressed a wish that tmpfs support preallocation. Cong Wang wrote a patch, but several kernel guys expressed scepticism: https://lkml.org/lkml/2011/11/18/137 Christoph Hellwig: What for exactly? Please explain why preallocating on tmpfs would make any sense. Kay Sievers: To be able to safely use mmap(), regarding SIGBUS, on files on the /dev/shm filesystem. The glibc fallback loop for -ENOSYS [or -EOPNOTSUPP] on fallocate is just ugly. Hugh Dickins: If tmpfs is going to support fallocate(FALLOC_FL_PUNCH_HOLE), it would seem perverse to permit the deallocation but fail the allocation. Christoph Hellwig: Agreed. Now that we do have shmem_fallocate() for hole-punching, plumb in basic support for preallocation mode too. It's fairly straightforward (though quite a few details needed attention), except for when it fails part way through. What a pity that fallocate(2) was not specified to return the length allocated, permitting short fallocations! As it is, when it fails part way through, we ought to free what has just been allocated by this system call; but must be very sure not to free any allocated earlier, or any allocated by racing accesses (not all excluded by i_mutex). But we cannot distinguish them: so in this patch simply leak allocations on partial failure (they will be freed later if the file is removed). An attractive alternative approach would have been for fallocate() not to allocate pages at all, but note reservations by entries in the radix-tree. But that would give less assurance, and, critically, would be hard to fit with mem cgroups (who owns the reservations?): allocating pages lets fallocate() behave in just the same way as write(). Based-on-patch-by: Cong Wang <amwang@redhat.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Cong Wang <amwang@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:41 +07:00
/* Try to avoid a swapstorm if len is impossible to satisfy */
if (sbinfo->max_blocks && end - start > sbinfo->max_blocks) {
error = -ENOSPC;
goto out;
}
shmem: fix faulting into a hole, not taking i_mutex Commit f00cdc6df7d7 ("shmem: fix faulting into a hole while it's punched") was buggy: Sasha sent a lockdep report to remind us that grabbing i_mutex in the fault path is a no-no (write syscall may already hold i_mutex while faulting user buffer). We tried a completely different approach (see following patch) but that proved inadequate: good enough for a rational workload, but not good enough against trinity - which forks off so many mappings of the object that contention on i_mmap_mutex while hole-puncher holds i_mutex builds into serious starvation when concurrent faults force the puncher to fall back to single-page unmap_mapping_range() searches of the i_mmap tree. So return to the original umbrella approach, but keep away from i_mutex this time. We really don't want to bloat every shmem inode with a new mutex or completion, just to protect this unlikely case from trinity. So extend the original with wait_queue_head on stack at the hole-punch end, and wait_queue item on the stack at the fault end. This involves further use of i_lock to guard against the races: lockdep has been happy so far, and I see fs/inode.c:unlock_new_inode() holds i_lock around wake_up_bit(), which is comparable to what we do here. i_lock is more convenient, but we could switch to shmem's info->lock. This issue has been tagged with CVE-2014-4171, which will require commit f00cdc6df7d7 and this and the following patch to be backported: we suggest to 3.1+, though in fact the trinity forkbomb effect might go back as far as 2.6.16, when madvise(,,MADV_REMOVE) came in - or might not, since much has changed, with i_mmap_mutex a spinlock before 3.0. Anyone running trinity on 3.0 and earlier? I don't think we need care. Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lukas Czerner <lczerner@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: <stable@vger.kernel.org> [3.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-24 04:00:10 +07:00
shmem_falloc.waitq = NULL;
tmpfs: quit when fallocate fills memory As it stands, a large fallocate() on tmpfs is liable to fill memory with pages, freed on failure except when they run into swap, at which point they become fixed into the file despite the failure. That feels quite wrong, to be consuming resources precisely when they're in short supply. Go the other way instead: shmem_fallocate() indicate the range it has fallocated to shmem_writepage(), keeping count of pages it's allocating; shmem_writepage() reactivate instead of swapping out pages fallocated by this syscall (but happily swap out those from earlier occasions), keeping count; shmem_fallocate() compare counts and give up once the reactivated pages have started to coming back to writepage (approximately: some zones would in fact recycle faster than others). This is a little unusual, but works well: although we could consider the failure to swap as a bug, and fix it later with SWAP_MAP_FALLOC handling added in swapfile.c and memcontrol.c, I doubt that we shall ever want to. (If there's no swap, an over-large fallocate() on tmpfs is limited in the same way as writing: stopped by rlimit, or by tmpfs mount size if that was set sensibly, or by __vm_enough_memory() heuristics if OVERCOMMIT_GUESS or OVERCOMMIT_NEVER. If OVERCOMMIT_ALWAYS, then it is liable to OOM-kill others as writing would, but stops and frees if interrupted.) Now that everything is freed on failure, we can then skip updating ctime. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Cong Wang <amwang@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:42 +07:00
shmem_falloc.start = start;
shmem_falloc.next = start;
shmem_falloc.nr_falloced = 0;
shmem_falloc.nr_unswapped = 0;
spin_lock(&inode->i_lock);
inode->i_private = &shmem_falloc;
spin_unlock(&inode->i_lock);
tmpfs: support fallocate preallocation The systemd plumbers expressed a wish that tmpfs support preallocation. Cong Wang wrote a patch, but several kernel guys expressed scepticism: https://lkml.org/lkml/2011/11/18/137 Christoph Hellwig: What for exactly? Please explain why preallocating on tmpfs would make any sense. Kay Sievers: To be able to safely use mmap(), regarding SIGBUS, on files on the /dev/shm filesystem. The glibc fallback loop for -ENOSYS [or -EOPNOTSUPP] on fallocate is just ugly. Hugh Dickins: If tmpfs is going to support fallocate(FALLOC_FL_PUNCH_HOLE), it would seem perverse to permit the deallocation but fail the allocation. Christoph Hellwig: Agreed. Now that we do have shmem_fallocate() for hole-punching, plumb in basic support for preallocation mode too. It's fairly straightforward (though quite a few details needed attention), except for when it fails part way through. What a pity that fallocate(2) was not specified to return the length allocated, permitting short fallocations! As it is, when it fails part way through, we ought to free what has just been allocated by this system call; but must be very sure not to free any allocated earlier, or any allocated by racing accesses (not all excluded by i_mutex). But we cannot distinguish them: so in this patch simply leak allocations on partial failure (they will be freed later if the file is removed). An attractive alternative approach would have been for fallocate() not to allocate pages at all, but note reservations by entries in the radix-tree. But that would give less assurance, and, critically, would be hard to fit with mem cgroups (who owns the reservations?): allocating pages lets fallocate() behave in just the same way as write(). Based-on-patch-by: Cong Wang <amwang@redhat.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Cong Wang <amwang@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:41 +07:00
for (index = start; index < end; index++) {
struct page *page;
/*
* Good, the fallocate(2) manpage permits EINTR: we may have
* been interrupted because we are using up too much memory.
*/
if (signal_pending(current))
error = -EINTR;
tmpfs: quit when fallocate fills memory As it stands, a large fallocate() on tmpfs is liable to fill memory with pages, freed on failure except when they run into swap, at which point they become fixed into the file despite the failure. That feels quite wrong, to be consuming resources precisely when they're in short supply. Go the other way instead: shmem_fallocate() indicate the range it has fallocated to shmem_writepage(), keeping count of pages it's allocating; shmem_writepage() reactivate instead of swapping out pages fallocated by this syscall (but happily swap out those from earlier occasions), keeping count; shmem_fallocate() compare counts and give up once the reactivated pages have started to coming back to writepage (approximately: some zones would in fact recycle faster than others). This is a little unusual, but works well: although we could consider the failure to swap as a bug, and fix it later with SWAP_MAP_FALLOC handling added in swapfile.c and memcontrol.c, I doubt that we shall ever want to. (If there's no swap, an over-large fallocate() on tmpfs is limited in the same way as writing: stopped by rlimit, or by tmpfs mount size if that was set sensibly, or by __vm_enough_memory() heuristics if OVERCOMMIT_GUESS or OVERCOMMIT_NEVER. If OVERCOMMIT_ALWAYS, then it is liable to OOM-kill others as writing would, but stops and frees if interrupted.) Now that everything is freed on failure, we can then skip updating ctime. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Cong Wang <amwang@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:42 +07:00
else if (shmem_falloc.nr_unswapped > shmem_falloc.nr_falloced)
error = -ENOMEM;
tmpfs: support fallocate preallocation The systemd plumbers expressed a wish that tmpfs support preallocation. Cong Wang wrote a patch, but several kernel guys expressed scepticism: https://lkml.org/lkml/2011/11/18/137 Christoph Hellwig: What for exactly? Please explain why preallocating on tmpfs would make any sense. Kay Sievers: To be able to safely use mmap(), regarding SIGBUS, on files on the /dev/shm filesystem. The glibc fallback loop for -ENOSYS [or -EOPNOTSUPP] on fallocate is just ugly. Hugh Dickins: If tmpfs is going to support fallocate(FALLOC_FL_PUNCH_HOLE), it would seem perverse to permit the deallocation but fail the allocation. Christoph Hellwig: Agreed. Now that we do have shmem_fallocate() for hole-punching, plumb in basic support for preallocation mode too. It's fairly straightforward (though quite a few details needed attention), except for when it fails part way through. What a pity that fallocate(2) was not specified to return the length allocated, permitting short fallocations! As it is, when it fails part way through, we ought to free what has just been allocated by this system call; but must be very sure not to free any allocated earlier, or any allocated by racing accesses (not all excluded by i_mutex). But we cannot distinguish them: so in this patch simply leak allocations on partial failure (they will be freed later if the file is removed). An attractive alternative approach would have been for fallocate() not to allocate pages at all, but note reservations by entries in the radix-tree. But that would give less assurance, and, critically, would be hard to fit with mem cgroups (who owns the reservations?): allocating pages lets fallocate() behave in just the same way as write(). Based-on-patch-by: Cong Wang <amwang@redhat.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Cong Wang <amwang@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:41 +07:00
else
error = shmem_getpage(inode, index, &page, SGP_FALLOC);
tmpfs: support fallocate preallocation The systemd plumbers expressed a wish that tmpfs support preallocation. Cong Wang wrote a patch, but several kernel guys expressed scepticism: https://lkml.org/lkml/2011/11/18/137 Christoph Hellwig: What for exactly? Please explain why preallocating on tmpfs would make any sense. Kay Sievers: To be able to safely use mmap(), regarding SIGBUS, on files on the /dev/shm filesystem. The glibc fallback loop for -ENOSYS [or -EOPNOTSUPP] on fallocate is just ugly. Hugh Dickins: If tmpfs is going to support fallocate(FALLOC_FL_PUNCH_HOLE), it would seem perverse to permit the deallocation but fail the allocation. Christoph Hellwig: Agreed. Now that we do have shmem_fallocate() for hole-punching, plumb in basic support for preallocation mode too. It's fairly straightforward (though quite a few details needed attention), except for when it fails part way through. What a pity that fallocate(2) was not specified to return the length allocated, permitting short fallocations! As it is, when it fails part way through, we ought to free what has just been allocated by this system call; but must be very sure not to free any allocated earlier, or any allocated by racing accesses (not all excluded by i_mutex). But we cannot distinguish them: so in this patch simply leak allocations on partial failure (they will be freed later if the file is removed). An attractive alternative approach would have been for fallocate() not to allocate pages at all, but note reservations by entries in the radix-tree. But that would give less assurance, and, critically, would be hard to fit with mem cgroups (who owns the reservations?): allocating pages lets fallocate() behave in just the same way as write(). Based-on-patch-by: Cong Wang <amwang@redhat.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Cong Wang <amwang@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:41 +07:00
if (error) {
/* Remove the !PageUptodate pages we added */
if (index > start) {
shmem_undo_range(inode,
(loff_t)start << PAGE_SHIFT,
((loff_t)index << PAGE_SHIFT) - 1, true);
}
tmpfs: quit when fallocate fills memory As it stands, a large fallocate() on tmpfs is liable to fill memory with pages, freed on failure except when they run into swap, at which point they become fixed into the file despite the failure. That feels quite wrong, to be consuming resources precisely when they're in short supply. Go the other way instead: shmem_fallocate() indicate the range it has fallocated to shmem_writepage(), keeping count of pages it's allocating; shmem_writepage() reactivate instead of swapping out pages fallocated by this syscall (but happily swap out those from earlier occasions), keeping count; shmem_fallocate() compare counts and give up once the reactivated pages have started to coming back to writepage (approximately: some zones would in fact recycle faster than others). This is a little unusual, but works well: although we could consider the failure to swap as a bug, and fix it later with SWAP_MAP_FALLOC handling added in swapfile.c and memcontrol.c, I doubt that we shall ever want to. (If there's no swap, an over-large fallocate() on tmpfs is limited in the same way as writing: stopped by rlimit, or by tmpfs mount size if that was set sensibly, or by __vm_enough_memory() heuristics if OVERCOMMIT_GUESS or OVERCOMMIT_NEVER. If OVERCOMMIT_ALWAYS, then it is liable to OOM-kill others as writing would, but stops and frees if interrupted.) Now that everything is freed on failure, we can then skip updating ctime. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Cong Wang <amwang@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:42 +07:00
goto undone;
tmpfs: support fallocate preallocation The systemd plumbers expressed a wish that tmpfs support preallocation. Cong Wang wrote a patch, but several kernel guys expressed scepticism: https://lkml.org/lkml/2011/11/18/137 Christoph Hellwig: What for exactly? Please explain why preallocating on tmpfs would make any sense. Kay Sievers: To be able to safely use mmap(), regarding SIGBUS, on files on the /dev/shm filesystem. The glibc fallback loop for -ENOSYS [or -EOPNOTSUPP] on fallocate is just ugly. Hugh Dickins: If tmpfs is going to support fallocate(FALLOC_FL_PUNCH_HOLE), it would seem perverse to permit the deallocation but fail the allocation. Christoph Hellwig: Agreed. Now that we do have shmem_fallocate() for hole-punching, plumb in basic support for preallocation mode too. It's fairly straightforward (though quite a few details needed attention), except for when it fails part way through. What a pity that fallocate(2) was not specified to return the length allocated, permitting short fallocations! As it is, when it fails part way through, we ought to free what has just been allocated by this system call; but must be very sure not to free any allocated earlier, or any allocated by racing accesses (not all excluded by i_mutex). But we cannot distinguish them: so in this patch simply leak allocations on partial failure (they will be freed later if the file is removed). An attractive alternative approach would have been for fallocate() not to allocate pages at all, but note reservations by entries in the radix-tree. But that would give less assurance, and, critically, would be hard to fit with mem cgroups (who owns the reservations?): allocating pages lets fallocate() behave in just the same way as write(). Based-on-patch-by: Cong Wang <amwang@redhat.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Cong Wang <amwang@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:41 +07:00
}
tmpfs: quit when fallocate fills memory As it stands, a large fallocate() on tmpfs is liable to fill memory with pages, freed on failure except when they run into swap, at which point they become fixed into the file despite the failure. That feels quite wrong, to be consuming resources precisely when they're in short supply. Go the other way instead: shmem_fallocate() indicate the range it has fallocated to shmem_writepage(), keeping count of pages it's allocating; shmem_writepage() reactivate instead of swapping out pages fallocated by this syscall (but happily swap out those from earlier occasions), keeping count; shmem_fallocate() compare counts and give up once the reactivated pages have started to coming back to writepage (approximately: some zones would in fact recycle faster than others). This is a little unusual, but works well: although we could consider the failure to swap as a bug, and fix it later with SWAP_MAP_FALLOC handling added in swapfile.c and memcontrol.c, I doubt that we shall ever want to. (If there's no swap, an over-large fallocate() on tmpfs is limited in the same way as writing: stopped by rlimit, or by tmpfs mount size if that was set sensibly, or by __vm_enough_memory() heuristics if OVERCOMMIT_GUESS or OVERCOMMIT_NEVER. If OVERCOMMIT_ALWAYS, then it is liable to OOM-kill others as writing would, but stops and frees if interrupted.) Now that everything is freed on failure, we can then skip updating ctime. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Cong Wang <amwang@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:42 +07:00
/*
* Inform shmem_writepage() how far we have reached.
* No need for lock or barrier: we have the page lock.
*/
shmem_falloc.next++;
if (!PageUptodate(page))
shmem_falloc.nr_falloced++;
tmpfs: support fallocate preallocation The systemd plumbers expressed a wish that tmpfs support preallocation. Cong Wang wrote a patch, but several kernel guys expressed scepticism: https://lkml.org/lkml/2011/11/18/137 Christoph Hellwig: What for exactly? Please explain why preallocating on tmpfs would make any sense. Kay Sievers: To be able to safely use mmap(), regarding SIGBUS, on files on the /dev/shm filesystem. The glibc fallback loop for -ENOSYS [or -EOPNOTSUPP] on fallocate is just ugly. Hugh Dickins: If tmpfs is going to support fallocate(FALLOC_FL_PUNCH_HOLE), it would seem perverse to permit the deallocation but fail the allocation. Christoph Hellwig: Agreed. Now that we do have shmem_fallocate() for hole-punching, plumb in basic support for preallocation mode too. It's fairly straightforward (though quite a few details needed attention), except for when it fails part way through. What a pity that fallocate(2) was not specified to return the length allocated, permitting short fallocations! As it is, when it fails part way through, we ought to free what has just been allocated by this system call; but must be very sure not to free any allocated earlier, or any allocated by racing accesses (not all excluded by i_mutex). But we cannot distinguish them: so in this patch simply leak allocations on partial failure (they will be freed later if the file is removed). An attractive alternative approach would have been for fallocate() not to allocate pages at all, but note reservations by entries in the radix-tree. But that would give less assurance, and, critically, would be hard to fit with mem cgroups (who owns the reservations?): allocating pages lets fallocate() behave in just the same way as write(). Based-on-patch-by: Cong Wang <amwang@redhat.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Cong Wang <amwang@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:41 +07:00
/*
* If !PageUptodate, leave it that way so that freeable pages
* can be recognized if we need to rollback on error later.
* But set_page_dirty so that memory pressure will swap rather
tmpfs: support fallocate preallocation The systemd plumbers expressed a wish that tmpfs support preallocation. Cong Wang wrote a patch, but several kernel guys expressed scepticism: https://lkml.org/lkml/2011/11/18/137 Christoph Hellwig: What for exactly? Please explain why preallocating on tmpfs would make any sense. Kay Sievers: To be able to safely use mmap(), regarding SIGBUS, on files on the /dev/shm filesystem. The glibc fallback loop for -ENOSYS [or -EOPNOTSUPP] on fallocate is just ugly. Hugh Dickins: If tmpfs is going to support fallocate(FALLOC_FL_PUNCH_HOLE), it would seem perverse to permit the deallocation but fail the allocation. Christoph Hellwig: Agreed. Now that we do have shmem_fallocate() for hole-punching, plumb in basic support for preallocation mode too. It's fairly straightforward (though quite a few details needed attention), except for when it fails part way through. What a pity that fallocate(2) was not specified to return the length allocated, permitting short fallocations! As it is, when it fails part way through, we ought to free what has just been allocated by this system call; but must be very sure not to free any allocated earlier, or any allocated by racing accesses (not all excluded by i_mutex). But we cannot distinguish them: so in this patch simply leak allocations on partial failure (they will be freed later if the file is removed). An attractive alternative approach would have been for fallocate() not to allocate pages at all, but note reservations by entries in the radix-tree. But that would give less assurance, and, critically, would be hard to fit with mem cgroups (who owns the reservations?): allocating pages lets fallocate() behave in just the same way as write(). Based-on-patch-by: Cong Wang <amwang@redhat.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Cong Wang <amwang@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:41 +07:00
* than free the pages we are allocating (and SGP_CACHE pages
* might still be clean: we now need to mark those dirty too).
*/
set_page_dirty(page);
unlock_page(page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
put_page(page);
tmpfs: support fallocate preallocation The systemd plumbers expressed a wish that tmpfs support preallocation. Cong Wang wrote a patch, but several kernel guys expressed scepticism: https://lkml.org/lkml/2011/11/18/137 Christoph Hellwig: What for exactly? Please explain why preallocating on tmpfs would make any sense. Kay Sievers: To be able to safely use mmap(), regarding SIGBUS, on files on the /dev/shm filesystem. The glibc fallback loop for -ENOSYS [or -EOPNOTSUPP] on fallocate is just ugly. Hugh Dickins: If tmpfs is going to support fallocate(FALLOC_FL_PUNCH_HOLE), it would seem perverse to permit the deallocation but fail the allocation. Christoph Hellwig: Agreed. Now that we do have shmem_fallocate() for hole-punching, plumb in basic support for preallocation mode too. It's fairly straightforward (though quite a few details needed attention), except for when it fails part way through. What a pity that fallocate(2) was not specified to return the length allocated, permitting short fallocations! As it is, when it fails part way through, we ought to free what has just been allocated by this system call; but must be very sure not to free any allocated earlier, or any allocated by racing accesses (not all excluded by i_mutex). But we cannot distinguish them: so in this patch simply leak allocations on partial failure (they will be freed later if the file is removed). An attractive alternative approach would have been for fallocate() not to allocate pages at all, but note reservations by entries in the radix-tree. But that would give less assurance, and, critically, would be hard to fit with mem cgroups (who owns the reservations?): allocating pages lets fallocate() behave in just the same way as write(). Based-on-patch-by: Cong Wang <amwang@redhat.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Cong Wang <amwang@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:41 +07:00
cond_resched();
}
if (!(mode & FALLOC_FL_KEEP_SIZE) && offset + len > inode->i_size)
i_size_write(inode, offset + len);
inode->i_ctime = current_time(inode);
tmpfs: quit when fallocate fills memory As it stands, a large fallocate() on tmpfs is liable to fill memory with pages, freed on failure except when they run into swap, at which point they become fixed into the file despite the failure. That feels quite wrong, to be consuming resources precisely when they're in short supply. Go the other way instead: shmem_fallocate() indicate the range it has fallocated to shmem_writepage(), keeping count of pages it's allocating; shmem_writepage() reactivate instead of swapping out pages fallocated by this syscall (but happily swap out those from earlier occasions), keeping count; shmem_fallocate() compare counts and give up once the reactivated pages have started to coming back to writepage (approximately: some zones would in fact recycle faster than others). This is a little unusual, but works well: although we could consider the failure to swap as a bug, and fix it later with SWAP_MAP_FALLOC handling added in swapfile.c and memcontrol.c, I doubt that we shall ever want to. (If there's no swap, an over-large fallocate() on tmpfs is limited in the same way as writing: stopped by rlimit, or by tmpfs mount size if that was set sensibly, or by __vm_enough_memory() heuristics if OVERCOMMIT_GUESS or OVERCOMMIT_NEVER. If OVERCOMMIT_ALWAYS, then it is liable to OOM-kill others as writing would, but stops and frees if interrupted.) Now that everything is freed on failure, we can then skip updating ctime. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Cong Wang <amwang@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:42 +07:00
undone:
spin_lock(&inode->i_lock);
inode->i_private = NULL;
spin_unlock(&inode->i_lock);
tmpfs: support fallocate preallocation The systemd plumbers expressed a wish that tmpfs support preallocation. Cong Wang wrote a patch, but several kernel guys expressed scepticism: https://lkml.org/lkml/2011/11/18/137 Christoph Hellwig: What for exactly? Please explain why preallocating on tmpfs would make any sense. Kay Sievers: To be able to safely use mmap(), regarding SIGBUS, on files on the /dev/shm filesystem. The glibc fallback loop for -ENOSYS [or -EOPNOTSUPP] on fallocate is just ugly. Hugh Dickins: If tmpfs is going to support fallocate(FALLOC_FL_PUNCH_HOLE), it would seem perverse to permit the deallocation but fail the allocation. Christoph Hellwig: Agreed. Now that we do have shmem_fallocate() for hole-punching, plumb in basic support for preallocation mode too. It's fairly straightforward (though quite a few details needed attention), except for when it fails part way through. What a pity that fallocate(2) was not specified to return the length allocated, permitting short fallocations! As it is, when it fails part way through, we ought to free what has just been allocated by this system call; but must be very sure not to free any allocated earlier, or any allocated by racing accesses (not all excluded by i_mutex). But we cannot distinguish them: so in this patch simply leak allocations on partial failure (they will be freed later if the file is removed). An attractive alternative approach would have been for fallocate() not to allocate pages at all, but note reservations by entries in the radix-tree. But that would give less assurance, and, critically, would be hard to fit with mem cgroups (who owns the reservations?): allocating pages lets fallocate() behave in just the same way as write(). Based-on-patch-by: Cong Wang <amwang@redhat.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Cong Wang <amwang@redhat.com> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30 05:06:41 +07:00
out:
inode_unlock(inode);
return error;
}
static int shmem_statfs(struct dentry *dentry, struct kstatfs *buf)
{
struct shmem_sb_info *sbinfo = SHMEM_SB(dentry->d_sb);
buf->f_type = TMPFS_MAGIC;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
buf->f_bsize = PAGE_SIZE;
buf->f_namelen = NAME_MAX;
if (sbinfo->max_blocks) {
buf->f_blocks = sbinfo->max_blocks;
buf->f_bavail =
buf->f_bfree = sbinfo->max_blocks -
percpu_counter_sum(&sbinfo->used_blocks);
}
if (sbinfo->max_inodes) {
buf->f_files = sbinfo->max_inodes;
buf->f_ffree = sbinfo->free_inodes;
}
/* else leave those fields 0 like simple_statfs */
return 0;
}
/*
* File creation. Allocate an inode, and we're done..
*/
static int
shmem_mknod(struct inode *dir, struct dentry *dentry, umode_t mode, dev_t dev)
{
struct inode *inode;
int error = -ENOSPC;
inode = shmem_get_inode(dir->i_sb, dir, mode, dev, VM_NORESERVE);
if (inode) {
error = simple_acl_create(dir, inode);
if (error)
goto out_iput;
error = security_inode_init_security(inode, dir,
&dentry->d_name,
shmem_initxattrs, NULL);
if (error && error != -EOPNOTSUPP)
goto out_iput;
error = 0;
dir->i_size += BOGO_DIRENT_SIZE;
dir->i_ctime = dir->i_mtime = current_time(dir);
d_instantiate(dentry, inode);
dget(dentry); /* Extra count - pin the dentry in core */
}
return error;
out_iput:
iput(inode);
return error;
}
static int
shmem_tmpfile(struct inode *dir, struct dentry *dentry, umode_t mode)
{
struct inode *inode;
int error = -ENOSPC;
inode = shmem_get_inode(dir->i_sb, dir, mode, 0, VM_NORESERVE);
if (inode) {
error = security_inode_init_security(inode, dir,
NULL,
shmem_initxattrs, NULL);
if (error && error != -EOPNOTSUPP)
goto out_iput;
error = simple_acl_create(dir, inode);
if (error)
goto out_iput;
d_tmpfile(dentry, inode);
}
return error;
out_iput:
iput(inode);
return error;
}
static int shmem_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode)
{
int error;
if ((error = shmem_mknod(dir, dentry, mode | S_IFDIR, 0)))
return error;
inc_nlink(dir);
return 0;
}
static int shmem_create(struct inode *dir, struct dentry *dentry, umode_t mode,
bool excl)
{
return shmem_mknod(dir, dentry, mode | S_IFREG, 0);
}
/*
* Link a file..
*/
static int shmem_link(struct dentry *old_dentry, struct inode *dir, struct dentry *dentry)
{
struct inode *inode = d_inode(old_dentry);
int ret = 0;
/*
* No ordinary (disk based) filesystem counts links as inodes;
* but each new link needs a new dentry, pinning lowmem, and
* tmpfs dentries cannot be pruned until they are unlinked.
* But if an O_TMPFILE file is linked into the tmpfs, the
* first link must skip that, to get the accounting right.
*/
if (inode->i_nlink) {
tmpfs: per-superblock i_ino support Patch series "tmpfs: inode: Reduce risk of inum overflow", v7. In Facebook production we are seeing heavy i_ino wraparounds on tmpfs. On affected tiers, in excess of 10% of hosts show multiple files with different content and the same inode number, with some servers even having as many as 150 duplicated inode numbers with differing file content. This causes actual, tangible problems in production. For example, we have complaints from those working on remote caches that their application is reporting cache corruptions because it uses (device, inodenum) to establish the identity of a particular cache object, but because it's not unique any more, the application refuses to continue and reports cache corruption. Even worse, sometimes applications may not even detect the corruption but may continue anyway, causing phantom and hard to debug behaviour. In general, userspace applications expect that (device, inodenum) should be enough to be uniquely point to one inode, which seems fair enough. One might also need to check the generation, but in this case: 1. That's not currently exposed to userspace (ioctl(...FS_IOC_GETVERSION...) returns ENOTTY on tmpfs); 2. Even with generation, there shouldn't be two live inodes with the same inode number on one device. In order to mitigate this, we take a two-pronged approach: 1. Moving inum generation from being global to per-sb for tmpfs. This itself allows some reduction in i_ino churn. This works on both 64- and 32- bit machines. 2. Adding inode{64,32} for tmpfs. This fix is supported on machines with 64-bit ino_t only: we allow users to mount tmpfs with a new inode64 option that uses the full width of ino_t, or CONFIG_TMPFS_INODE64. You can see how this compares to previous related patches which didn't implement this per-superblock: - https://patchwork.kernel.org/patch/11254001/ - https://patchwork.kernel.org/patch/11023915/ This patch (of 2): get_next_ino has a number of problems: - It uses and returns a uint, which is susceptible to become overflowed if a lot of volatile inodes that use get_next_ino are created. - It's global, with no specificity per-sb or even per-filesystem. This means it's not that difficult to cause inode number wraparounds on a single device, which can result in having multiple distinct inodes with the same inode number. This patch adds a per-superblock counter that mitigates the second case. This design also allows us to later have a specific i_ino size per-device, for example, allowing users to choose whether to use 32- or 64-bit inodes for each tmpfs mount. This is implemented in the next commit. For internal shmem mounts which may be less tolerant to spinlock delays, we implement a percpu batching scheme which only takes the stat_lock at each batch boundary. Signed-off-by: Chris Down <chris@chrisdown.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hugh Dickins <hughd@google.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/cover.1594661218.git.chris@chrisdown.name Link: http://lkml.kernel.org/r/1986b9d63b986f08ec07a4aa4b2275e718e47d8a.1594661218.git.chris@chrisdown.name Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 13:20:20 +07:00
ret = shmem_reserve_inode(inode->i_sb, NULL);
if (ret)
goto out;
}
dir->i_size += BOGO_DIRENT_SIZE;
inode->i_ctime = dir->i_ctime = dir->i_mtime = current_time(inode);
inc_nlink(inode);
ihold(inode); /* New dentry reference */
dget(dentry); /* Extra pinning count for the created dentry */
d_instantiate(dentry, inode);
out:
return ret;
}
static int shmem_unlink(struct inode *dir, struct dentry *dentry)
{
struct inode *inode = d_inode(dentry);
if (inode->i_nlink > 1 && !S_ISDIR(inode->i_mode))
shmem_free_inode(inode->i_sb);
dir->i_size -= BOGO_DIRENT_SIZE;
inode->i_ctime = dir->i_ctime = dir->i_mtime = current_time(inode);
drop_nlink(inode);
dput(dentry); /* Undo the count from "create" - this does all the work */
return 0;
}
static int shmem_rmdir(struct inode *dir, struct dentry *dentry)
{
if (!simple_empty(dentry))
return -ENOTEMPTY;
drop_nlink(d_inode(dentry));
drop_nlink(dir);
return shmem_unlink(dir, dentry);
}
static int shmem_exchange(struct inode *old_dir, struct dentry *old_dentry, struct inode *new_dir, struct dentry *new_dentry)
{
VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry) Convert the following where appropriate: (1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry). (2) S_ISREG(dentry->d_inode) to d_is_reg(dentry). (3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry). This is actually more complicated than it appears as some calls should be converted to d_can_lookup() instead. The difference is whether the directory in question is a real dir with a ->lookup op or whether it's a fake dir with a ->d_automount op. In some circumstances, we can subsume checks for dentry->d_inode not being NULL into this, provided we the code isn't in a filesystem that expects d_inode to be NULL if the dirent really *is* negative (ie. if we're going to use d_inode() rather than d_backing_inode() to get the inode pointer). Note that the dentry type field may be set to something other than DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS manages the fall-through from a negative dentry to a lower layer. In such a case, the dentry type of the negative union dentry is set to the same as the type of the lower dentry. However, if you know d_inode is not NULL at the call site, then you can use the d_is_xxx() functions even in a filesystem. There is one further complication: a 0,0 chardev dentry may be labelled DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE. Strictly, this was intended for special directory entry types that don't have attached inodes. The following perl+coccinelle script was used: use strict; my @callers; open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') || die "Can't grep for S_ISDIR and co. callers"; @callers = <$fd>; close($fd); unless (@callers) { print "No matches\n"; exit(0); } my @cocci = ( '@@', 'expression E;', '@@', '', '- S_ISLNK(E->d_inode->i_mode)', '+ d_is_symlink(E)', '', '@@', 'expression E;', '@@', '', '- S_ISDIR(E->d_inode->i_mode)', '+ d_is_dir(E)', '', '@@', 'expression E;', '@@', '', '- S_ISREG(E->d_inode->i_mode)', '+ d_is_reg(E)' ); my $coccifile = "tmp.sp.cocci"; open($fd, ">$coccifile") || die $coccifile; print($fd "$_\n") || die $coccifile foreach (@cocci); close($fd); foreach my $file (@callers) { chomp $file; print "Processing ", $file, "\n"; system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 || die "spatch failed"; } [AV: overlayfs parts skipped] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-29 19:02:35 +07:00
bool old_is_dir = d_is_dir(old_dentry);
bool new_is_dir = d_is_dir(new_dentry);
if (old_dir != new_dir && old_is_dir != new_is_dir) {
if (old_is_dir) {
drop_nlink(old_dir);
inc_nlink(new_dir);
} else {
drop_nlink(new_dir);
inc_nlink(old_dir);
}
}
old_dir->i_ctime = old_dir->i_mtime =
new_dir->i_ctime = new_dir->i_mtime =
d_inode(old_dentry)->i_ctime =
d_inode(new_dentry)->i_ctime = current_time(old_dir);
return 0;
}
static int shmem_whiteout(struct inode *old_dir, struct dentry *old_dentry)
{
struct dentry *whiteout;
int error;
whiteout = d_alloc(old_dentry->d_parent, &old_dentry->d_name);
if (!whiteout)
return -ENOMEM;
error = shmem_mknod(old_dir, whiteout,
S_IFCHR | WHITEOUT_MODE, WHITEOUT_DEV);
dput(whiteout);
if (error)
return error;
/*
* Cheat and hash the whiteout while the old dentry is still in
* place, instead of playing games with FS_RENAME_DOES_D_MOVE.
*
* d_lookup() will consistently find one of them at this point,
* not sure which one, but that isn't even important.
*/
d_rehash(whiteout);
return 0;
}
/*
* The VFS layer already does all the dentry stuff for rename,
* we just have to decrement the usage count for the target if
* it exists so that the VFS layer correctly free's it when it
* gets overwritten.
*/
static int shmem_rename2(struct inode *old_dir, struct dentry *old_dentry, struct inode *new_dir, struct dentry *new_dentry, unsigned int flags)
{
struct inode *inode = d_inode(old_dentry);
int they_are_dirs = S_ISDIR(inode->i_mode);
if (flags & ~(RENAME_NOREPLACE | RENAME_EXCHANGE | RENAME_WHITEOUT))
return -EINVAL;
if (flags & RENAME_EXCHANGE)
return shmem_exchange(old_dir, old_dentry, new_dir, new_dentry);
if (!simple_empty(new_dentry))
return -ENOTEMPTY;
if (flags & RENAME_WHITEOUT) {
int error;
error = shmem_whiteout(old_dir, old_dentry);
if (error)
return error;
}
if (d_really_is_positive(new_dentry)) {
(void) shmem_unlink(new_dir, new_dentry);
if (they_are_dirs) {
drop_nlink(d_inode(new_dentry));
drop_nlink(old_dir);
}
} else if (they_are_dirs) {
drop_nlink(old_dir);
inc_nlink(new_dir);
}
old_dir->i_size -= BOGO_DIRENT_SIZE;
new_dir->i_size += BOGO_DIRENT_SIZE;
old_dir->i_ctime = old_dir->i_mtime =
new_dir->i_ctime = new_dir->i_mtime =
inode->i_ctime = current_time(old_dir);
return 0;
}
static int shmem_symlink(struct inode *dir, struct dentry *dentry, const char *symname)
{
int error;
int len;
struct inode *inode;
struct page *page;
len = strlen(symname) + 1;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
if (len > PAGE_SIZE)
return -ENAMETOOLONG;
inode = shmem_get_inode(dir->i_sb, dir, S_IFLNK | 0777, 0,
VM_NORESERVE);
if (!inode)
return -ENOSPC;
error = security_inode_init_security(inode, dir, &dentry->d_name,
shmem_initxattrs, NULL);
if (error && error != -EOPNOTSUPP) {
iput(inode);
return error;
}
inode->i_size = len-1;
if (len <= SHORT_SYMLINK_LEN) {
inode->i_link = kmemdup(symname, len, GFP_KERNEL);
if (!inode->i_link) {
iput(inode);
return -ENOMEM;
}
inode->i_op = &shmem_short_symlink_operations;
} else {
inode_nohighmem(inode);
error = shmem_getpage(inode, 0, &page, SGP_WRITE);
if (error) {
iput(inode);
return error;
}
inode->i_mapping->a_ops = &shmem_aops;
inode->i_op = &shmem_symlink_inode_operations;
memcpy(page_address(page), symname, len);
SetPageUptodate(page);
set_page_dirty(page);
unlock_page(page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
put_page(page);
}
dir->i_size += BOGO_DIRENT_SIZE;
dir->i_ctime = dir->i_mtime = current_time(dir);
d_instantiate(dentry, inode);
dget(dentry);
return 0;
}
static void shmem_put_link(void *arg)
{
mark_page_accessed(arg);
put_page(arg);
}
static const char *shmem_get_link(struct dentry *dentry,
struct inode *inode,
struct delayed_call *done)
{
struct page *page = NULL;
int error;
if (!dentry) {
page = find_get_page(inode->i_mapping, 0);
if (!page)
return ERR_PTR(-ECHILD);
if (!PageUptodate(page)) {
put_page(page);
return ERR_PTR(-ECHILD);
}
} else {
error = shmem_getpage(inode, 0, &page, SGP_READ);
if (error)
return ERR_PTR(error);
unlock_page(page);
}
set_delayed_call(done, shmem_put_link, page);
return page_address(page);
}
tmpfs: implement generic xattr support Implement generic xattrs for tmpfs filesystems. The Feodra project, while trying to replace suid apps with file capabilities, realized that tmpfs, which is used on the build systems, does not support file capabilities and thus cannot be used to build packages which use file capabilities. Xattrs are also needed for overlayfs. The xattr interface is a bit odd. If a filesystem does not implement any {get,set,list}xattr functions the VFS will call into some random LSM hooks and the running LSM can then implement some method for handling xattrs. SELinux for example provides a method to support security.selinux but no other security.* xattrs. As it stands today when one enables CONFIG_TMPFS_POSIX_ACL tmpfs will have xattr handler routines specifically to handle acls. Because of this tmpfs would loose the VFS/LSM helpers to support the running LSM. To make up for that tmpfs had stub functions that did nothing but call into the LSM hooks which implement the helpers. This new patch does not use the LSM fallback functions and instead just implements a native get/set/list xattr feature for the full security.* and trusted.* namespace like a normal filesystem. This means that tmpfs can now support both security.selinux and security.capability, which was not previously possible. The basic implementation is that I attach a: struct shmem_xattr { struct list_head list; /* anchored by shmem_inode_info->xattr_list */ char *name; size_t size; char value[0]; }; Into the struct shmem_inode_info for each xattr that is set. This implementation could easily support the user.* namespace as well, except some care needs to be taken to prevent large amounts of unswappable memory being allocated for unprivileged users. [mszeredi@suse.cz: new config option, suport trusted.*, support symlinks] Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com> Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Hugh Dickins <hughd@google.com> Tested-by: Jordi Pujol <jordipujolp@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 07:12:39 +07:00
#ifdef CONFIG_TMPFS_XATTR
/*
tmpfs: implement generic xattr support Implement generic xattrs for tmpfs filesystems. The Feodra project, while trying to replace suid apps with file capabilities, realized that tmpfs, which is used on the build systems, does not support file capabilities and thus cannot be used to build packages which use file capabilities. Xattrs are also needed for overlayfs. The xattr interface is a bit odd. If a filesystem does not implement any {get,set,list}xattr functions the VFS will call into some random LSM hooks and the running LSM can then implement some method for handling xattrs. SELinux for example provides a method to support security.selinux but no other security.* xattrs. As it stands today when one enables CONFIG_TMPFS_POSIX_ACL tmpfs will have xattr handler routines specifically to handle acls. Because of this tmpfs would loose the VFS/LSM helpers to support the running LSM. To make up for that tmpfs had stub functions that did nothing but call into the LSM hooks which implement the helpers. This new patch does not use the LSM fallback functions and instead just implements a native get/set/list xattr feature for the full security.* and trusted.* namespace like a normal filesystem. This means that tmpfs can now support both security.selinux and security.capability, which was not previously possible. The basic implementation is that I attach a: struct shmem_xattr { struct list_head list; /* anchored by shmem_inode_info->xattr_list */ char *name; size_t size; char value[0]; }; Into the struct shmem_inode_info for each xattr that is set. This implementation could easily support the user.* namespace as well, except some care needs to be taken to prevent large amounts of unswappable memory being allocated for unprivileged users. [mszeredi@suse.cz: new config option, suport trusted.*, support symlinks] Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com> Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Hugh Dickins <hughd@google.com> Tested-by: Jordi Pujol <jordipujolp@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 07:12:39 +07:00
* Superblocks without xattr inode operations may get some security.* xattr
* support from the LSM "for free". As soon as we have any other xattrs
* like ACLs, we also need to implement the security.* handlers at
* filesystem level, though.
*/
/*
* Callback for security_inode_init_security() for acquiring xattrs.
*/
static int shmem_initxattrs(struct inode *inode,
const struct xattr *xattr_array,
void *fs_info)
{
struct shmem_inode_info *info = SHMEM_I(inode);
const struct xattr *xattr;
struct simple_xattr *new_xattr;
size_t len;
for (xattr = xattr_array; xattr->name != NULL; xattr++) {
new_xattr = simple_xattr_alloc(xattr->value, xattr->value_len);
if (!new_xattr)
return -ENOMEM;
len = strlen(xattr->name) + 1;
new_xattr->name = kmalloc(XATTR_SECURITY_PREFIX_LEN + len,
GFP_KERNEL);
if (!new_xattr->name) {
kvfree(new_xattr);
return -ENOMEM;
}
memcpy(new_xattr->name, XATTR_SECURITY_PREFIX,
XATTR_SECURITY_PREFIX_LEN);
memcpy(new_xattr->name + XATTR_SECURITY_PREFIX_LEN,
xattr->name, len);
simple_xattr_list_add(&info->xattrs, new_xattr);
}
return 0;
}
static int shmem_xattr_handler_get(const struct xattr_handler *handler,
struct dentry *unused, struct inode *inode,
const char *name, void *buffer, size_t size)
tmpfs: implement generic xattr support Implement generic xattrs for tmpfs filesystems. The Feodra project, while trying to replace suid apps with file capabilities, realized that tmpfs, which is used on the build systems, does not support file capabilities and thus cannot be used to build packages which use file capabilities. Xattrs are also needed for overlayfs. The xattr interface is a bit odd. If a filesystem does not implement any {get,set,list}xattr functions the VFS will call into some random LSM hooks and the running LSM can then implement some method for handling xattrs. SELinux for example provides a method to support security.selinux but no other security.* xattrs. As it stands today when one enables CONFIG_TMPFS_POSIX_ACL tmpfs will have xattr handler routines specifically to handle acls. Because of this tmpfs would loose the VFS/LSM helpers to support the running LSM. To make up for that tmpfs had stub functions that did nothing but call into the LSM hooks which implement the helpers. This new patch does not use the LSM fallback functions and instead just implements a native get/set/list xattr feature for the full security.* and trusted.* namespace like a normal filesystem. This means that tmpfs can now support both security.selinux and security.capability, which was not previously possible. The basic implementation is that I attach a: struct shmem_xattr { struct list_head list; /* anchored by shmem_inode_info->xattr_list */ char *name; size_t size; char value[0]; }; Into the struct shmem_inode_info for each xattr that is set. This implementation could easily support the user.* namespace as well, except some care needs to be taken to prevent large amounts of unswappable memory being allocated for unprivileged users. [mszeredi@suse.cz: new config option, suport trusted.*, support symlinks] Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com> Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Hugh Dickins <hughd@google.com> Tested-by: Jordi Pujol <jordipujolp@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 07:12:39 +07:00
{
struct shmem_inode_info *info = SHMEM_I(inode);
tmpfs: implement generic xattr support Implement generic xattrs for tmpfs filesystems. The Feodra project, while trying to replace suid apps with file capabilities, realized that tmpfs, which is used on the build systems, does not support file capabilities and thus cannot be used to build packages which use file capabilities. Xattrs are also needed for overlayfs. The xattr interface is a bit odd. If a filesystem does not implement any {get,set,list}xattr functions the VFS will call into some random LSM hooks and the running LSM can then implement some method for handling xattrs. SELinux for example provides a method to support security.selinux but no other security.* xattrs. As it stands today when one enables CONFIG_TMPFS_POSIX_ACL tmpfs will have xattr handler routines specifically to handle acls. Because of this tmpfs would loose the VFS/LSM helpers to support the running LSM. To make up for that tmpfs had stub functions that did nothing but call into the LSM hooks which implement the helpers. This new patch does not use the LSM fallback functions and instead just implements a native get/set/list xattr feature for the full security.* and trusted.* namespace like a normal filesystem. This means that tmpfs can now support both security.selinux and security.capability, which was not previously possible. The basic implementation is that I attach a: struct shmem_xattr { struct list_head list; /* anchored by shmem_inode_info->xattr_list */ char *name; size_t size; char value[0]; }; Into the struct shmem_inode_info for each xattr that is set. This implementation could easily support the user.* namespace as well, except some care needs to be taken to prevent large amounts of unswappable memory being allocated for unprivileged users. [mszeredi@suse.cz: new config option, suport trusted.*, support symlinks] Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com> Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Hugh Dickins <hughd@google.com> Tested-by: Jordi Pujol <jordipujolp@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 07:12:39 +07:00
name = xattr_full_name(handler, name);
return simple_xattr_get(&info->xattrs, name, buffer, size);
tmpfs: implement generic xattr support Implement generic xattrs for tmpfs filesystems. The Feodra project, while trying to replace suid apps with file capabilities, realized that tmpfs, which is used on the build systems, does not support file capabilities and thus cannot be used to build packages which use file capabilities. Xattrs are also needed for overlayfs. The xattr interface is a bit odd. If a filesystem does not implement any {get,set,list}xattr functions the VFS will call into some random LSM hooks and the running LSM can then implement some method for handling xattrs. SELinux for example provides a method to support security.selinux but no other security.* xattrs. As it stands today when one enables CONFIG_TMPFS_POSIX_ACL tmpfs will have xattr handler routines specifically to handle acls. Because of this tmpfs would loose the VFS/LSM helpers to support the running LSM. To make up for that tmpfs had stub functions that did nothing but call into the LSM hooks which implement the helpers. This new patch does not use the LSM fallback functions and instead just implements a native get/set/list xattr feature for the full security.* and trusted.* namespace like a normal filesystem. This means that tmpfs can now support both security.selinux and security.capability, which was not previously possible. The basic implementation is that I attach a: struct shmem_xattr { struct list_head list; /* anchored by shmem_inode_info->xattr_list */ char *name; size_t size; char value[0]; }; Into the struct shmem_inode_info for each xattr that is set. This implementation could easily support the user.* namespace as well, except some care needs to be taken to prevent large amounts of unswappable memory being allocated for unprivileged users. [mszeredi@suse.cz: new config option, suport trusted.*, support symlinks] Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com> Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Hugh Dickins <hughd@google.com> Tested-by: Jordi Pujol <jordipujolp@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 07:12:39 +07:00
}
static int shmem_xattr_handler_set(const struct xattr_handler *handler,
struct dentry *unused, struct inode *inode,
const char *name, const void *value,
size_t size, int flags)
tmpfs: implement generic xattr support Implement generic xattrs for tmpfs filesystems. The Feodra project, while trying to replace suid apps with file capabilities, realized that tmpfs, which is used on the build systems, does not support file capabilities and thus cannot be used to build packages which use file capabilities. Xattrs are also needed for overlayfs. The xattr interface is a bit odd. If a filesystem does not implement any {get,set,list}xattr functions the VFS will call into some random LSM hooks and the running LSM can then implement some method for handling xattrs. SELinux for example provides a method to support security.selinux but no other security.* xattrs. As it stands today when one enables CONFIG_TMPFS_POSIX_ACL tmpfs will have xattr handler routines specifically to handle acls. Because of this tmpfs would loose the VFS/LSM helpers to support the running LSM. To make up for that tmpfs had stub functions that did nothing but call into the LSM hooks which implement the helpers. This new patch does not use the LSM fallback functions and instead just implements a native get/set/list xattr feature for the full security.* and trusted.* namespace like a normal filesystem. This means that tmpfs can now support both security.selinux and security.capability, which was not previously possible. The basic implementation is that I attach a: struct shmem_xattr { struct list_head list; /* anchored by shmem_inode_info->xattr_list */ char *name; size_t size; char value[0]; }; Into the struct shmem_inode_info for each xattr that is set. This implementation could easily support the user.* namespace as well, except some care needs to be taken to prevent large amounts of unswappable memory being allocated for unprivileged users. [mszeredi@suse.cz: new config option, suport trusted.*, support symlinks] Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com> Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Hugh Dickins <hughd@google.com> Tested-by: Jordi Pujol <jordipujolp@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 07:12:39 +07:00
{
struct shmem_inode_info *info = SHMEM_I(inode);
tmpfs: implement generic xattr support Implement generic xattrs for tmpfs filesystems. The Feodra project, while trying to replace suid apps with file capabilities, realized that tmpfs, which is used on the build systems, does not support file capabilities and thus cannot be used to build packages which use file capabilities. Xattrs are also needed for overlayfs. The xattr interface is a bit odd. If a filesystem does not implement any {get,set,list}xattr functions the VFS will call into some random LSM hooks and the running LSM can then implement some method for handling xattrs. SELinux for example provides a method to support security.selinux but no other security.* xattrs. As it stands today when one enables CONFIG_TMPFS_POSIX_ACL tmpfs will have xattr handler routines specifically to handle acls. Because of this tmpfs would loose the VFS/LSM helpers to support the running LSM. To make up for that tmpfs had stub functions that did nothing but call into the LSM hooks which implement the helpers. This new patch does not use the LSM fallback functions and instead just implements a native get/set/list xattr feature for the full security.* and trusted.* namespace like a normal filesystem. This means that tmpfs can now support both security.selinux and security.capability, which was not previously possible. The basic implementation is that I attach a: struct shmem_xattr { struct list_head list; /* anchored by shmem_inode_info->xattr_list */ char *name; size_t size; char value[0]; }; Into the struct shmem_inode_info for each xattr that is set. This implementation could easily support the user.* namespace as well, except some care needs to be taken to prevent large amounts of unswappable memory being allocated for unprivileged users. [mszeredi@suse.cz: new config option, suport trusted.*, support symlinks] Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com> Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Hugh Dickins <hughd@google.com> Tested-by: Jordi Pujol <jordipujolp@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 07:12:39 +07:00
name = xattr_full_name(handler, name);
return simple_xattr_set(&info->xattrs, name, value, size, flags, NULL);
tmpfs: implement generic xattr support Implement generic xattrs for tmpfs filesystems. The Feodra project, while trying to replace suid apps with file capabilities, realized that tmpfs, which is used on the build systems, does not support file capabilities and thus cannot be used to build packages which use file capabilities. Xattrs are also needed for overlayfs. The xattr interface is a bit odd. If a filesystem does not implement any {get,set,list}xattr functions the VFS will call into some random LSM hooks and the running LSM can then implement some method for handling xattrs. SELinux for example provides a method to support security.selinux but no other security.* xattrs. As it stands today when one enables CONFIG_TMPFS_POSIX_ACL tmpfs will have xattr handler routines specifically to handle acls. Because of this tmpfs would loose the VFS/LSM helpers to support the running LSM. To make up for that tmpfs had stub functions that did nothing but call into the LSM hooks which implement the helpers. This new patch does not use the LSM fallback functions and instead just implements a native get/set/list xattr feature for the full security.* and trusted.* namespace like a normal filesystem. This means that tmpfs can now support both security.selinux and security.capability, which was not previously possible. The basic implementation is that I attach a: struct shmem_xattr { struct list_head list; /* anchored by shmem_inode_info->xattr_list */ char *name; size_t size; char value[0]; }; Into the struct shmem_inode_info for each xattr that is set. This implementation could easily support the user.* namespace as well, except some care needs to be taken to prevent large amounts of unswappable memory being allocated for unprivileged users. [mszeredi@suse.cz: new config option, suport trusted.*, support symlinks] Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com> Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Hugh Dickins <hughd@google.com> Tested-by: Jordi Pujol <jordipujolp@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 07:12:39 +07:00
}
static const struct xattr_handler shmem_security_xattr_handler = {
.prefix = XATTR_SECURITY_PREFIX,
.get = shmem_xattr_handler_get,
.set = shmem_xattr_handler_set,
};
tmpfs: implement generic xattr support Implement generic xattrs for tmpfs filesystems. The Feodra project, while trying to replace suid apps with file capabilities, realized that tmpfs, which is used on the build systems, does not support file capabilities and thus cannot be used to build packages which use file capabilities. Xattrs are also needed for overlayfs. The xattr interface is a bit odd. If a filesystem does not implement any {get,set,list}xattr functions the VFS will call into some random LSM hooks and the running LSM can then implement some method for handling xattrs. SELinux for example provides a method to support security.selinux but no other security.* xattrs. As it stands today when one enables CONFIG_TMPFS_POSIX_ACL tmpfs will have xattr handler routines specifically to handle acls. Because of this tmpfs would loose the VFS/LSM helpers to support the running LSM. To make up for that tmpfs had stub functions that did nothing but call into the LSM hooks which implement the helpers. This new patch does not use the LSM fallback functions and instead just implements a native get/set/list xattr feature for the full security.* and trusted.* namespace like a normal filesystem. This means that tmpfs can now support both security.selinux and security.capability, which was not previously possible. The basic implementation is that I attach a: struct shmem_xattr { struct list_head list; /* anchored by shmem_inode_info->xattr_list */ char *name; size_t size; char value[0]; }; Into the struct shmem_inode_info for each xattr that is set. This implementation could easily support the user.* namespace as well, except some care needs to be taken to prevent large amounts of unswappable memory being allocated for unprivileged users. [mszeredi@suse.cz: new config option, suport trusted.*, support symlinks] Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com> Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Hugh Dickins <hughd@google.com> Tested-by: Jordi Pujol <jordipujolp@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 07:12:39 +07:00
static const struct xattr_handler shmem_trusted_xattr_handler = {
.prefix = XATTR_TRUSTED_PREFIX,
.get = shmem_xattr_handler_get,
.set = shmem_xattr_handler_set,
};
tmpfs: implement generic xattr support Implement generic xattrs for tmpfs filesystems. The Feodra project, while trying to replace suid apps with file capabilities, realized that tmpfs, which is used on the build systems, does not support file capabilities and thus cannot be used to build packages which use file capabilities. Xattrs are also needed for overlayfs. The xattr interface is a bit odd. If a filesystem does not implement any {get,set,list}xattr functions the VFS will call into some random LSM hooks and the running LSM can then implement some method for handling xattrs. SELinux for example provides a method to support security.selinux but no other security.* xattrs. As it stands today when one enables CONFIG_TMPFS_POSIX_ACL tmpfs will have xattr handler routines specifically to handle acls. Because of this tmpfs would loose the VFS/LSM helpers to support the running LSM. To make up for that tmpfs had stub functions that did nothing but call into the LSM hooks which implement the helpers. This new patch does not use the LSM fallback functions and instead just implements a native get/set/list xattr feature for the full security.* and trusted.* namespace like a normal filesystem. This means that tmpfs can now support both security.selinux and security.capability, which was not previously possible. The basic implementation is that I attach a: struct shmem_xattr { struct list_head list; /* anchored by shmem_inode_info->xattr_list */ char *name; size_t size; char value[0]; }; Into the struct shmem_inode_info for each xattr that is set. This implementation could easily support the user.* namespace as well, except some care needs to be taken to prevent large amounts of unswappable memory being allocated for unprivileged users. [mszeredi@suse.cz: new config option, suport trusted.*, support symlinks] Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com> Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Hugh Dickins <hughd@google.com> Tested-by: Jordi Pujol <jordipujolp@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 07:12:39 +07:00
static const struct xattr_handler *shmem_xattr_handlers[] = {
#ifdef CONFIG_TMPFS_POSIX_ACL
&posix_acl_access_xattr_handler,
&posix_acl_default_xattr_handler,
#endif
&shmem_security_xattr_handler,
&shmem_trusted_xattr_handler,
NULL
};
tmpfs: implement generic xattr support Implement generic xattrs for tmpfs filesystems. The Feodra project, while trying to replace suid apps with file capabilities, realized that tmpfs, which is used on the build systems, does not support file capabilities and thus cannot be used to build packages which use file capabilities. Xattrs are also needed for overlayfs. The xattr interface is a bit odd. If a filesystem does not implement any {get,set,list}xattr functions the VFS will call into some random LSM hooks and the running LSM can then implement some method for handling xattrs. SELinux for example provides a method to support security.selinux but no other security.* xattrs. As it stands today when one enables CONFIG_TMPFS_POSIX_ACL tmpfs will have xattr handler routines specifically to handle acls. Because of this tmpfs would loose the VFS/LSM helpers to support the running LSM. To make up for that tmpfs had stub functions that did nothing but call into the LSM hooks which implement the helpers. This new patch does not use the LSM fallback functions and instead just implements a native get/set/list xattr feature for the full security.* and trusted.* namespace like a normal filesystem. This means that tmpfs can now support both security.selinux and security.capability, which was not previously possible. The basic implementation is that I attach a: struct shmem_xattr { struct list_head list; /* anchored by shmem_inode_info->xattr_list */ char *name; size_t size; char value[0]; }; Into the struct shmem_inode_info for each xattr that is set. This implementation could easily support the user.* namespace as well, except some care needs to be taken to prevent large amounts of unswappable memory being allocated for unprivileged users. [mszeredi@suse.cz: new config option, suport trusted.*, support symlinks] Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com> Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Hugh Dickins <hughd@google.com> Tested-by: Jordi Pujol <jordipujolp@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 07:12:39 +07:00
static ssize_t shmem_listxattr(struct dentry *dentry, char *buffer, size_t size)
{
struct shmem_inode_info *info = SHMEM_I(d_inode(dentry));
return simple_xattr_list(d_inode(dentry), &info->xattrs, buffer, size);
tmpfs: implement generic xattr support Implement generic xattrs for tmpfs filesystems. The Feodra project, while trying to replace suid apps with file capabilities, realized that tmpfs, which is used on the build systems, does not support file capabilities and thus cannot be used to build packages which use file capabilities. Xattrs are also needed for overlayfs. The xattr interface is a bit odd. If a filesystem does not implement any {get,set,list}xattr functions the VFS will call into some random LSM hooks and the running LSM can then implement some method for handling xattrs. SELinux for example provides a method to support security.selinux but no other security.* xattrs. As it stands today when one enables CONFIG_TMPFS_POSIX_ACL tmpfs will have xattr handler routines specifically to handle acls. Because of this tmpfs would loose the VFS/LSM helpers to support the running LSM. To make up for that tmpfs had stub functions that did nothing but call into the LSM hooks which implement the helpers. This new patch does not use the LSM fallback functions and instead just implements a native get/set/list xattr feature for the full security.* and trusted.* namespace like a normal filesystem. This means that tmpfs can now support both security.selinux and security.capability, which was not previously possible. The basic implementation is that I attach a: struct shmem_xattr { struct list_head list; /* anchored by shmem_inode_info->xattr_list */ char *name; size_t size; char value[0]; }; Into the struct shmem_inode_info for each xattr that is set. This implementation could easily support the user.* namespace as well, except some care needs to be taken to prevent large amounts of unswappable memory being allocated for unprivileged users. [mszeredi@suse.cz: new config option, suport trusted.*, support symlinks] Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com> Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Hugh Dickins <hughd@google.com> Tested-by: Jordi Pujol <jordipujolp@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 07:12:39 +07:00
}
#endif /* CONFIG_TMPFS_XATTR */
static const struct inode_operations shmem_short_symlink_operations = {
.get_link = simple_get_link,
tmpfs: implement generic xattr support Implement generic xattrs for tmpfs filesystems. The Feodra project, while trying to replace suid apps with file capabilities, realized that tmpfs, which is used on the build systems, does not support file capabilities and thus cannot be used to build packages which use file capabilities. Xattrs are also needed for overlayfs. The xattr interface is a bit odd. If a filesystem does not implement any {get,set,list}xattr functions the VFS will call into some random LSM hooks and the running LSM can then implement some method for handling xattrs. SELinux for example provides a method to support security.selinux but no other security.* xattrs. As it stands today when one enables CONFIG_TMPFS_POSIX_ACL tmpfs will have xattr handler routines specifically to handle acls. Because of this tmpfs would loose the VFS/LSM helpers to support the running LSM. To make up for that tmpfs had stub functions that did nothing but call into the LSM hooks which implement the helpers. This new patch does not use the LSM fallback functions and instead just implements a native get/set/list xattr feature for the full security.* and trusted.* namespace like a normal filesystem. This means that tmpfs can now support both security.selinux and security.capability, which was not previously possible. The basic implementation is that I attach a: struct shmem_xattr { struct list_head list; /* anchored by shmem_inode_info->xattr_list */ char *name; size_t size; char value[0]; }; Into the struct shmem_inode_info for each xattr that is set. This implementation could easily support the user.* namespace as well, except some care needs to be taken to prevent large amounts of unswappable memory being allocated for unprivileged users. [mszeredi@suse.cz: new config option, suport trusted.*, support symlinks] Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com> Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Hugh Dickins <hughd@google.com> Tested-by: Jordi Pujol <jordipujolp@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 07:12:39 +07:00
#ifdef CONFIG_TMPFS_XATTR
.listxattr = shmem_listxattr,
#endif
};
static const struct inode_operations shmem_symlink_inode_operations = {
.get_link = shmem_get_link,
tmpfs: implement generic xattr support Implement generic xattrs for tmpfs filesystems. The Feodra project, while trying to replace suid apps with file capabilities, realized that tmpfs, which is used on the build systems, does not support file capabilities and thus cannot be used to build packages which use file capabilities. Xattrs are also needed for overlayfs. The xattr interface is a bit odd. If a filesystem does not implement any {get,set,list}xattr functions the VFS will call into some random LSM hooks and the running LSM can then implement some method for handling xattrs. SELinux for example provides a method to support security.selinux but no other security.* xattrs. As it stands today when one enables CONFIG_TMPFS_POSIX_ACL tmpfs will have xattr handler routines specifically to handle acls. Because of this tmpfs would loose the VFS/LSM helpers to support the running LSM. To make up for that tmpfs had stub functions that did nothing but call into the LSM hooks which implement the helpers. This new patch does not use the LSM fallback functions and instead just implements a native get/set/list xattr feature for the full security.* and trusted.* namespace like a normal filesystem. This means that tmpfs can now support both security.selinux and security.capability, which was not previously possible. The basic implementation is that I attach a: struct shmem_xattr { struct list_head list; /* anchored by shmem_inode_info->xattr_list */ char *name; size_t size; char value[0]; }; Into the struct shmem_inode_info for each xattr that is set. This implementation could easily support the user.* namespace as well, except some care needs to be taken to prevent large amounts of unswappable memory being allocated for unprivileged users. [mszeredi@suse.cz: new config option, suport trusted.*, support symlinks] Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com> Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Hugh Dickins <hughd@google.com> Tested-by: Jordi Pujol <jordipujolp@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 07:12:39 +07:00
#ifdef CONFIG_TMPFS_XATTR
.listxattr = shmem_listxattr,
#endif
tmpfs: implement generic xattr support Implement generic xattrs for tmpfs filesystems. The Feodra project, while trying to replace suid apps with file capabilities, realized that tmpfs, which is used on the build systems, does not support file capabilities and thus cannot be used to build packages which use file capabilities. Xattrs are also needed for overlayfs. The xattr interface is a bit odd. If a filesystem does not implement any {get,set,list}xattr functions the VFS will call into some random LSM hooks and the running LSM can then implement some method for handling xattrs. SELinux for example provides a method to support security.selinux but no other security.* xattrs. As it stands today when one enables CONFIG_TMPFS_POSIX_ACL tmpfs will have xattr handler routines specifically to handle acls. Because of this tmpfs would loose the VFS/LSM helpers to support the running LSM. To make up for that tmpfs had stub functions that did nothing but call into the LSM hooks which implement the helpers. This new patch does not use the LSM fallback functions and instead just implements a native get/set/list xattr feature for the full security.* and trusted.* namespace like a normal filesystem. This means that tmpfs can now support both security.selinux and security.capability, which was not previously possible. The basic implementation is that I attach a: struct shmem_xattr { struct list_head list; /* anchored by shmem_inode_info->xattr_list */ char *name; size_t size; char value[0]; }; Into the struct shmem_inode_info for each xattr that is set. This implementation could easily support the user.* namespace as well, except some care needs to be taken to prevent large amounts of unswappable memory being allocated for unprivileged users. [mszeredi@suse.cz: new config option, suport trusted.*, support symlinks] Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com> Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Hugh Dickins <hughd@google.com> Tested-by: Jordi Pujol <jordipujolp@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 07:12:39 +07:00
};
[PATCH] knfsd: add nfs-export support to tmpfs We need to encode a decode the 'file' part of a handle. We simply use the inode number and generation number to construct the filehandle. The generation number is the time when the file was created. As inode numbers cycle through the full 32 bits before being reused, there is no real chance of the same inum being allocated to different files in the same second so this is suitably unique. Using time-of-day rather than e.g. jiffies makes it less likely that the same filehandle can be created after a reboot. In order to be able to decode a filehandle we need to be able to lookup by inum, which means that the inode needs to be added to the inode hash table (tmpfs doesn't currently hash inodes as there is never a need to lookup by inum). To avoid overhead when not exporting, we only hash an inode when it is first exported. This requires a lock to ensure it isn't hashed twice. This code is separate from the patch posted in June06 from Atal Shargorodsky which provided the same functionality, but does borrow slightly from it. Locking comment: Most filesystems that hash their inodes do so at the point where the 'struct inode' is initialised, and that has suitable locking (I_NEW). Here in shmem, we are hashing the inode later, the first time we need an NFS file handle for it. We no longer have I_NEW to ensure only one thread tries to add it to the hash table. Cc: Atal Shargorodsky <atal@codefidence.com> Cc: Gilad Ben-Yossef <gilad@codefidence.com> Signed-off-by: David M. Grimes <dgrimes@navisite.com> Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17 14:09:45 +07:00
static struct dentry *shmem_get_parent(struct dentry *child)
{
return ERR_PTR(-ESTALE);
}
static int shmem_match(struct inode *ino, void *vfh)
{
__u32 *fh = vfh;
__u64 inum = fh[2];
inum = (inum << 32) | fh[1];
return ino->i_ino == inum && fh[0] == ino->i_generation;
}
/* Find any alias of inode, but prefer a hashed alias */
static struct dentry *shmem_find_alias(struct inode *inode)
{
struct dentry *alias = d_find_alias(inode);
return alias ?: d_find_any_alias(inode);
}
static struct dentry *shmem_fh_to_dentry(struct super_block *sb,
struct fid *fid, int fh_len, int fh_type)
[PATCH] knfsd: add nfs-export support to tmpfs We need to encode a decode the 'file' part of a handle. We simply use the inode number and generation number to construct the filehandle. The generation number is the time when the file was created. As inode numbers cycle through the full 32 bits before being reused, there is no real chance of the same inum being allocated to different files in the same second so this is suitably unique. Using time-of-day rather than e.g. jiffies makes it less likely that the same filehandle can be created after a reboot. In order to be able to decode a filehandle we need to be able to lookup by inum, which means that the inode needs to be added to the inode hash table (tmpfs doesn't currently hash inodes as there is never a need to lookup by inum). To avoid overhead when not exporting, we only hash an inode when it is first exported. This requires a lock to ensure it isn't hashed twice. This code is separate from the patch posted in June06 from Atal Shargorodsky which provided the same functionality, but does borrow slightly from it. Locking comment: Most filesystems that hash their inodes do so at the point where the 'struct inode' is initialised, and that has suitable locking (I_NEW). Here in shmem, we are hashing the inode later, the first time we need an NFS file handle for it. We no longer have I_NEW to ensure only one thread tries to add it to the hash table. Cc: Atal Shargorodsky <atal@codefidence.com> Cc: Gilad Ben-Yossef <gilad@codefidence.com> Signed-off-by: David M. Grimes <dgrimes@navisite.com> Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17 14:09:45 +07:00
{
struct inode *inode;
struct dentry *dentry = NULL;
u64 inum;
if (fh_len < 3)
return NULL;
[PATCH] knfsd: add nfs-export support to tmpfs We need to encode a decode the 'file' part of a handle. We simply use the inode number and generation number to construct the filehandle. The generation number is the time when the file was created. As inode numbers cycle through the full 32 bits before being reused, there is no real chance of the same inum being allocated to different files in the same second so this is suitably unique. Using time-of-day rather than e.g. jiffies makes it less likely that the same filehandle can be created after a reboot. In order to be able to decode a filehandle we need to be able to lookup by inum, which means that the inode needs to be added to the inode hash table (tmpfs doesn't currently hash inodes as there is never a need to lookup by inum). To avoid overhead when not exporting, we only hash an inode when it is first exported. This requires a lock to ensure it isn't hashed twice. This code is separate from the patch posted in June06 from Atal Shargorodsky which provided the same functionality, but does borrow slightly from it. Locking comment: Most filesystems that hash their inodes do so at the point where the 'struct inode' is initialised, and that has suitable locking (I_NEW). Here in shmem, we are hashing the inode later, the first time we need an NFS file handle for it. We no longer have I_NEW to ensure only one thread tries to add it to the hash table. Cc: Atal Shargorodsky <atal@codefidence.com> Cc: Gilad Ben-Yossef <gilad@codefidence.com> Signed-off-by: David M. Grimes <dgrimes@navisite.com> Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17 14:09:45 +07:00
inum = fid->raw[2];
inum = (inum << 32) | fid->raw[1];
inode = ilookup5(sb, (unsigned long)(inum + fid->raw[0]),
shmem_match, fid->raw);
[PATCH] knfsd: add nfs-export support to tmpfs We need to encode a decode the 'file' part of a handle. We simply use the inode number and generation number to construct the filehandle. The generation number is the time when the file was created. As inode numbers cycle through the full 32 bits before being reused, there is no real chance of the same inum being allocated to different files in the same second so this is suitably unique. Using time-of-day rather than e.g. jiffies makes it less likely that the same filehandle can be created after a reboot. In order to be able to decode a filehandle we need to be able to lookup by inum, which means that the inode needs to be added to the inode hash table (tmpfs doesn't currently hash inodes as there is never a need to lookup by inum). To avoid overhead when not exporting, we only hash an inode when it is first exported. This requires a lock to ensure it isn't hashed twice. This code is separate from the patch posted in June06 from Atal Shargorodsky which provided the same functionality, but does borrow slightly from it. Locking comment: Most filesystems that hash their inodes do so at the point where the 'struct inode' is initialised, and that has suitable locking (I_NEW). Here in shmem, we are hashing the inode later, the first time we need an NFS file handle for it. We no longer have I_NEW to ensure only one thread tries to add it to the hash table. Cc: Atal Shargorodsky <atal@codefidence.com> Cc: Gilad Ben-Yossef <gilad@codefidence.com> Signed-off-by: David M. Grimes <dgrimes@navisite.com> Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17 14:09:45 +07:00
if (inode) {
dentry = shmem_find_alias(inode);
[PATCH] knfsd: add nfs-export support to tmpfs We need to encode a decode the 'file' part of a handle. We simply use the inode number and generation number to construct the filehandle. The generation number is the time when the file was created. As inode numbers cycle through the full 32 bits before being reused, there is no real chance of the same inum being allocated to different files in the same second so this is suitably unique. Using time-of-day rather than e.g. jiffies makes it less likely that the same filehandle can be created after a reboot. In order to be able to decode a filehandle we need to be able to lookup by inum, which means that the inode needs to be added to the inode hash table (tmpfs doesn't currently hash inodes as there is never a need to lookup by inum). To avoid overhead when not exporting, we only hash an inode when it is first exported. This requires a lock to ensure it isn't hashed twice. This code is separate from the patch posted in June06 from Atal Shargorodsky which provided the same functionality, but does borrow slightly from it. Locking comment: Most filesystems that hash their inodes do so at the point where the 'struct inode' is initialised, and that has suitable locking (I_NEW). Here in shmem, we are hashing the inode later, the first time we need an NFS file handle for it. We no longer have I_NEW to ensure only one thread tries to add it to the hash table. Cc: Atal Shargorodsky <atal@codefidence.com> Cc: Gilad Ben-Yossef <gilad@codefidence.com> Signed-off-by: David M. Grimes <dgrimes@navisite.com> Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17 14:09:45 +07:00
iput(inode);
}
return dentry;
[PATCH] knfsd: add nfs-export support to tmpfs We need to encode a decode the 'file' part of a handle. We simply use the inode number and generation number to construct the filehandle. The generation number is the time when the file was created. As inode numbers cycle through the full 32 bits before being reused, there is no real chance of the same inum being allocated to different files in the same second so this is suitably unique. Using time-of-day rather than e.g. jiffies makes it less likely that the same filehandle can be created after a reboot. In order to be able to decode a filehandle we need to be able to lookup by inum, which means that the inode needs to be added to the inode hash table (tmpfs doesn't currently hash inodes as there is never a need to lookup by inum). To avoid overhead when not exporting, we only hash an inode when it is first exported. This requires a lock to ensure it isn't hashed twice. This code is separate from the patch posted in June06 from Atal Shargorodsky which provided the same functionality, but does borrow slightly from it. Locking comment: Most filesystems that hash their inodes do so at the point where the 'struct inode' is initialised, and that has suitable locking (I_NEW). Here in shmem, we are hashing the inode later, the first time we need an NFS file handle for it. We no longer have I_NEW to ensure only one thread tries to add it to the hash table. Cc: Atal Shargorodsky <atal@codefidence.com> Cc: Gilad Ben-Yossef <gilad@codefidence.com> Signed-off-by: David M. Grimes <dgrimes@navisite.com> Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17 14:09:45 +07:00
}
static int shmem_encode_fh(struct inode *inode, __u32 *fh, int *len,
struct inode *parent)
[PATCH] knfsd: add nfs-export support to tmpfs We need to encode a decode the 'file' part of a handle. We simply use the inode number and generation number to construct the filehandle. The generation number is the time when the file was created. As inode numbers cycle through the full 32 bits before being reused, there is no real chance of the same inum being allocated to different files in the same second so this is suitably unique. Using time-of-day rather than e.g. jiffies makes it less likely that the same filehandle can be created after a reboot. In order to be able to decode a filehandle we need to be able to lookup by inum, which means that the inode needs to be added to the inode hash table (tmpfs doesn't currently hash inodes as there is never a need to lookup by inum). To avoid overhead when not exporting, we only hash an inode when it is first exported. This requires a lock to ensure it isn't hashed twice. This code is separate from the patch posted in June06 from Atal Shargorodsky which provided the same functionality, but does borrow slightly from it. Locking comment: Most filesystems that hash their inodes do so at the point where the 'struct inode' is initialised, and that has suitable locking (I_NEW). Here in shmem, we are hashing the inode later, the first time we need an NFS file handle for it. We no longer have I_NEW to ensure only one thread tries to add it to the hash table. Cc: Atal Shargorodsky <atal@codefidence.com> Cc: Gilad Ben-Yossef <gilad@codefidence.com> Signed-off-by: David M. Grimes <dgrimes@navisite.com> Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17 14:09:45 +07:00
{
if (*len < 3) {
*len = 3;
return FILEID_INVALID;
}
[PATCH] knfsd: add nfs-export support to tmpfs We need to encode a decode the 'file' part of a handle. We simply use the inode number and generation number to construct the filehandle. The generation number is the time when the file was created. As inode numbers cycle through the full 32 bits before being reused, there is no real chance of the same inum being allocated to different files in the same second so this is suitably unique. Using time-of-day rather than e.g. jiffies makes it less likely that the same filehandle can be created after a reboot. In order to be able to decode a filehandle we need to be able to lookup by inum, which means that the inode needs to be added to the inode hash table (tmpfs doesn't currently hash inodes as there is never a need to lookup by inum). To avoid overhead when not exporting, we only hash an inode when it is first exported. This requires a lock to ensure it isn't hashed twice. This code is separate from the patch posted in June06 from Atal Shargorodsky which provided the same functionality, but does borrow slightly from it. Locking comment: Most filesystems that hash their inodes do so at the point where the 'struct inode' is initialised, and that has suitable locking (I_NEW). Here in shmem, we are hashing the inode later, the first time we need an NFS file handle for it. We no longer have I_NEW to ensure only one thread tries to add it to the hash table. Cc: Atal Shargorodsky <atal@codefidence.com> Cc: Gilad Ben-Yossef <gilad@codefidence.com> Signed-off-by: David M. Grimes <dgrimes@navisite.com> Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17 14:09:45 +07:00
if (inode_unhashed(inode)) {
[PATCH] knfsd: add nfs-export support to tmpfs We need to encode a decode the 'file' part of a handle. We simply use the inode number and generation number to construct the filehandle. The generation number is the time when the file was created. As inode numbers cycle through the full 32 bits before being reused, there is no real chance of the same inum being allocated to different files in the same second so this is suitably unique. Using time-of-day rather than e.g. jiffies makes it less likely that the same filehandle can be created after a reboot. In order to be able to decode a filehandle we need to be able to lookup by inum, which means that the inode needs to be added to the inode hash table (tmpfs doesn't currently hash inodes as there is never a need to lookup by inum). To avoid overhead when not exporting, we only hash an inode when it is first exported. This requires a lock to ensure it isn't hashed twice. This code is separate from the patch posted in June06 from Atal Shargorodsky which provided the same functionality, but does borrow slightly from it. Locking comment: Most filesystems that hash their inodes do so at the point where the 'struct inode' is initialised, and that has suitable locking (I_NEW). Here in shmem, we are hashing the inode later, the first time we need an NFS file handle for it. We no longer have I_NEW to ensure only one thread tries to add it to the hash table. Cc: Atal Shargorodsky <atal@codefidence.com> Cc: Gilad Ben-Yossef <gilad@codefidence.com> Signed-off-by: David M. Grimes <dgrimes@navisite.com> Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17 14:09:45 +07:00
/* Unfortunately insert_inode_hash is not idempotent,
* so as we hash inodes here rather than at creation
* time, we need a lock to ensure we only try
* to do it once
*/
static DEFINE_SPINLOCK(lock);
spin_lock(&lock);
if (inode_unhashed(inode))
[PATCH] knfsd: add nfs-export support to tmpfs We need to encode a decode the 'file' part of a handle. We simply use the inode number and generation number to construct the filehandle. The generation number is the time when the file was created. As inode numbers cycle through the full 32 bits before being reused, there is no real chance of the same inum being allocated to different files in the same second so this is suitably unique. Using time-of-day rather than e.g. jiffies makes it less likely that the same filehandle can be created after a reboot. In order to be able to decode a filehandle we need to be able to lookup by inum, which means that the inode needs to be added to the inode hash table (tmpfs doesn't currently hash inodes as there is never a need to lookup by inum). To avoid overhead when not exporting, we only hash an inode when it is first exported. This requires a lock to ensure it isn't hashed twice. This code is separate from the patch posted in June06 from Atal Shargorodsky which provided the same functionality, but does borrow slightly from it. Locking comment: Most filesystems that hash their inodes do so at the point where the 'struct inode' is initialised, and that has suitable locking (I_NEW). Here in shmem, we are hashing the inode later, the first time we need an NFS file handle for it. We no longer have I_NEW to ensure only one thread tries to add it to the hash table. Cc: Atal Shargorodsky <atal@codefidence.com> Cc: Gilad Ben-Yossef <gilad@codefidence.com> Signed-off-by: David M. Grimes <dgrimes@navisite.com> Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17 14:09:45 +07:00
__insert_inode_hash(inode,
inode->i_ino + inode->i_generation);
spin_unlock(&lock);
}
fh[0] = inode->i_generation;
fh[1] = inode->i_ino;
fh[2] = ((__u64)inode->i_ino) >> 32;
*len = 3;
return 1;
}
static const struct export_operations shmem_export_ops = {
[PATCH] knfsd: add nfs-export support to tmpfs We need to encode a decode the 'file' part of a handle. We simply use the inode number and generation number to construct the filehandle. The generation number is the time when the file was created. As inode numbers cycle through the full 32 bits before being reused, there is no real chance of the same inum being allocated to different files in the same second so this is suitably unique. Using time-of-day rather than e.g. jiffies makes it less likely that the same filehandle can be created after a reboot. In order to be able to decode a filehandle we need to be able to lookup by inum, which means that the inode needs to be added to the inode hash table (tmpfs doesn't currently hash inodes as there is never a need to lookup by inum). To avoid overhead when not exporting, we only hash an inode when it is first exported. This requires a lock to ensure it isn't hashed twice. This code is separate from the patch posted in June06 from Atal Shargorodsky which provided the same functionality, but does borrow slightly from it. Locking comment: Most filesystems that hash their inodes do so at the point where the 'struct inode' is initialised, and that has suitable locking (I_NEW). Here in shmem, we are hashing the inode later, the first time we need an NFS file handle for it. We no longer have I_NEW to ensure only one thread tries to add it to the hash table. Cc: Atal Shargorodsky <atal@codefidence.com> Cc: Gilad Ben-Yossef <gilad@codefidence.com> Signed-off-by: David M. Grimes <dgrimes@navisite.com> Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17 14:09:45 +07:00
.get_parent = shmem_get_parent,
.encode_fh = shmem_encode_fh,
.fh_to_dentry = shmem_fh_to_dentry,
[PATCH] knfsd: add nfs-export support to tmpfs We need to encode a decode the 'file' part of a handle. We simply use the inode number and generation number to construct the filehandle. The generation number is the time when the file was created. As inode numbers cycle through the full 32 bits before being reused, there is no real chance of the same inum being allocated to different files in the same second so this is suitably unique. Using time-of-day rather than e.g. jiffies makes it less likely that the same filehandle can be created after a reboot. In order to be able to decode a filehandle we need to be able to lookup by inum, which means that the inode needs to be added to the inode hash table (tmpfs doesn't currently hash inodes as there is never a need to lookup by inum). To avoid overhead when not exporting, we only hash an inode when it is first exported. This requires a lock to ensure it isn't hashed twice. This code is separate from the patch posted in June06 from Atal Shargorodsky which provided the same functionality, but does borrow slightly from it. Locking comment: Most filesystems that hash their inodes do so at the point where the 'struct inode' is initialised, and that has suitable locking (I_NEW). Here in shmem, we are hashing the inode later, the first time we need an NFS file handle for it. We no longer have I_NEW to ensure only one thread tries to add it to the hash table. Cc: Atal Shargorodsky <atal@codefidence.com> Cc: Gilad Ben-Yossef <gilad@codefidence.com> Signed-off-by: David M. Grimes <dgrimes@navisite.com> Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17 14:09:45 +07:00
};
enum shmem_param {
Opt_gid,
Opt_huge,
Opt_mode,
Opt_mpol,
Opt_nr_blocks,
Opt_nr_inodes,
Opt_size,
Opt_uid,
Opt_inode32,
Opt_inode64,
};
static const struct constant_table shmem_param_enums_huge[] = {
{"never", SHMEM_HUGE_NEVER },
{"always", SHMEM_HUGE_ALWAYS },
{"within_size", SHMEM_HUGE_WITHIN_SIZE },
{"advise", SHMEM_HUGE_ADVISE },
{}
};
const struct fs_parameter_spec shmem_fs_parameters[] = {
fsparam_u32 ("gid", Opt_gid),
fsparam_enum ("huge", Opt_huge, shmem_param_enums_huge),
fsparam_u32oct("mode", Opt_mode),
fsparam_string("mpol", Opt_mpol),
fsparam_string("nr_blocks", Opt_nr_blocks),
fsparam_string("nr_inodes", Opt_nr_inodes),
fsparam_string("size", Opt_size),
fsparam_u32 ("uid", Opt_uid),
fsparam_flag ("inode32", Opt_inode32),
fsparam_flag ("inode64", Opt_inode64),
{}
};
static int shmem_parse_one(struct fs_context *fc, struct fs_parameter *param)
{
struct shmem_options *ctx = fc->fs_private;
struct fs_parse_result result;
unsigned long long size;
char *rest;
int opt;
opt = fs_parse(fc, shmem_fs_parameters, param, &result);
if (opt < 0)
return opt;
switch (opt) {
case Opt_size:
size = memparse(param->string, &rest);
if (*rest == '%') {
size <<= PAGE_SHIFT;
size *= totalram_pages();
do_div(size, 100);
rest++;
}
if (*rest)
goto bad_value;
ctx->blocks = DIV_ROUND_UP(size, PAGE_SIZE);
ctx->seen |= SHMEM_SEEN_BLOCKS;
break;
case Opt_nr_blocks:
ctx->blocks = memparse(param->string, &rest);
if (*rest)
goto bad_value;
ctx->seen |= SHMEM_SEEN_BLOCKS;
break;
case Opt_nr_inodes:
ctx->inodes = memparse(param->string, &rest);
if (*rest)
goto bad_value;
ctx->seen |= SHMEM_SEEN_INODES;
break;
case Opt_mode:
ctx->mode = result.uint_32 & 07777;
break;
case Opt_uid:
ctx->uid = make_kuid(current_user_ns(), result.uint_32);
if (!uid_valid(ctx->uid))
goto bad_value;
break;
case Opt_gid:
ctx->gid = make_kgid(current_user_ns(), result.uint_32);
if (!gid_valid(ctx->gid))
goto bad_value;
break;
case Opt_huge:
ctx->huge = result.uint_32;
if (ctx->huge != SHMEM_HUGE_NEVER &&
!(IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE) &&
has_transparent_hugepage()))
goto unsupported_parameter;
ctx->seen |= SHMEM_SEEN_HUGE;
break;
case Opt_mpol:
if (IS_ENABLED(CONFIG_NUMA)) {
mpol_put(ctx->mpol);
ctx->mpol = NULL;
if (mpol_parse_str(param->string, &ctx->mpol))
goto bad_value;
break;
}
goto unsupported_parameter;
case Opt_inode32:
ctx->full_inums = false;
ctx->seen |= SHMEM_SEEN_INUMS;
break;
case Opt_inode64:
if (sizeof(ino_t) < 8) {
return invalfc(fc,
"Cannot use inode64 with <64bit inums in kernel\n");
}
ctx->full_inums = true;
ctx->seen |= SHMEM_SEEN_INUMS;
break;
}
return 0;
unsupported_parameter:
return invalfc(fc, "Unsupported parameter '%s'", param->key);
bad_value:
return invalfc(fc, "Bad value for '%s'", param->key);
}
static int shmem_parse_options(struct fs_context *fc, void *data)
{
char *options = data;
if (options) {
int err = security_sb_eat_lsm_opts(options, &fc->security);
if (err)
return err;
}
while (options != NULL) {
char *this_char = options;
for (;;) {
/*
* NUL-terminate this option: unfortunately,
* mount options form a comma-separated list,
* but mpol's nodelist may also contain commas.
*/
options = strchr(options, ',');
if (options == NULL)
break;
options++;
if (!isdigit(*options)) {
options[-1] = '\0';
break;
}
}
if (*this_char) {
char *value = strchr(this_char,'=');
size_t len = 0;
int err;
if (value) {
*value++ = '\0';
len = strlen(value);
}
err = vfs_parse_fs_string(fc, this_char, value, len);
if (err < 0)
return err;
}
}
return 0;
}
/*
* Reconfigure a shmem filesystem.
*
* Note that we disallow change from limited->unlimited blocks/inodes while any
* are in use; but we must separately disallow unlimited->limited, because in
* that case we have no record of how much is already in use.
*/
static int shmem_reconfigure(struct fs_context *fc)
{
struct shmem_options *ctx = fc->fs_private;
struct shmem_sb_info *sbinfo = SHMEM_SB(fc->root->d_sb);
unsigned long inodes;
const char *err;
spin_lock(&sbinfo->stat_lock);
inodes = sbinfo->max_inodes - sbinfo->free_inodes;
if ((ctx->seen & SHMEM_SEEN_BLOCKS) && ctx->blocks) {
if (!sbinfo->max_blocks) {
err = "Cannot retroactively limit size";
goto out;
}
if (percpu_counter_compare(&sbinfo->used_blocks,
ctx->blocks) > 0) {
err = "Too small a size for current use";
goto out;
}
}
if ((ctx->seen & SHMEM_SEEN_INODES) && ctx->inodes) {
if (!sbinfo->max_inodes) {
err = "Cannot retroactively limit inodes";
goto out;
}
if (ctx->inodes < inodes) {
err = "Too few inodes for current use";
goto out;
}
}
if ((ctx->seen & SHMEM_SEEN_INUMS) && !ctx->full_inums &&
sbinfo->next_ino > UINT_MAX) {
err = "Current inum too high to switch to 32-bit inums";
goto out;
}
if (ctx->seen & SHMEM_SEEN_HUGE)
sbinfo->huge = ctx->huge;
if (ctx->seen & SHMEM_SEEN_INUMS)
sbinfo->full_inums = ctx->full_inums;
if (ctx->seen & SHMEM_SEEN_BLOCKS)
sbinfo->max_blocks = ctx->blocks;
if (ctx->seen & SHMEM_SEEN_INODES) {
sbinfo->max_inodes = ctx->inodes;
sbinfo->free_inodes = ctx->inodes - inodes;
}
mempolicy: use struct mempolicy pointer in shmem_sb_info This patch replaces the mempolicy mode, mode_flags, and nodemask in the shmem_sb_info struct with a struct mempolicy pointer, initialized to NULL. This removes dependency on the details of mempolicy from shmem.c and hugetlbfs inode.c and simplifies the interfaces. mpol_parse_str() in mempolicy.c is changed to return, via a pointer to a pointer arg, a struct mempolicy pointer on success. For MPOL_DEFAULT, the returned pointer is NULL. Further, mpol_parse_str() now takes a 'no_context' argument that causes the input nodemask to be stored in the w.user_nodemask of the created mempolicy for use when the mempolicy is installed in a tmpfs inode shared policy tree. At that time, any cpuset contextualization is applied to the original input nodemask. This preserves the previous behavior where the input nodemask was stored in the superblock. We can think of the returned mempolicy as "context free". Because mpol_parse_str() is now calling mpol_new(), we can remove from mpol_to_str() the semantic checks that mpol_new() already performs. Add 'no_context' parameter to mpol_to_str() to specify that it should format the nodemask in w.user_nodemask for 'bind' and 'interleave' policies. Change mpol_shared_policy_init() to take a pointer to a "context free" struct mempolicy and to create a new, "contextualized" mempolicy using the mode, mode_flags and user_nodemask from the input mempolicy. Note: we know that the mempolicy passed to mpol_to_str() or mpol_shared_policy_init() from a tmpfs superblock is "context free". This is currently the only instance thereof. However, if we found more uses for this concept, and introduced any ambiguity as to whether a mempolicy was context free or not, we could add another internal mode flag to identify context free mempolicies. Then, we could remove the 'no_context' argument from mpol_to_str(). Added shmem_get_sbmpol() to return a reference counted superblock mempolicy, if one exists, to pass to mpol_shared_policy_init(). We must add the reference under the sb stat_lock to prevent races with replacement of the mpol by remount. This reference is removed in mpol_shared_policy_init(). [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: another build fix] [akpm@linux-foundation.org: yet another build fix] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 16:13:26 +07:00
tmpfs: fix use-after-free of mempolicy object The tmpfs remount logic preserves filesystem mempolicy if the mpol=M option is not specified in the remount request. A new policy can be specified if mpol=M is given. Before this patch remounting an mpol bound tmpfs without specifying mpol= mount option in the remount request would set the filesystem's mempolicy object to a freed mempolicy object. To reproduce the problem boot a DEBUG_PAGEALLOC kernel and run: # mkdir /tmp/x # mount -t tmpfs -o size=100M,mpol=interleave nodev /tmp/x # grep /tmp/x /proc/mounts nodev /tmp/x tmpfs rw,relatime,size=102400k,mpol=interleave:0-3 0 0 # mount -o remount,size=200M nodev /tmp/x # grep /tmp/x /proc/mounts nodev /tmp/x tmpfs rw,relatime,size=204800k,mpol=??? 0 0 # note ? garbage in mpol=... output above # dd if=/dev/zero of=/tmp/x/f count=1 # panic here Panic: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [< (null)>] (null) [...] Oops: 0010 [#1] SMP DEBUG_PAGEALLOC Call Trace: mpol_shared_policy_init+0xa5/0x160 shmem_get_inode+0x209/0x270 shmem_mknod+0x3e/0xf0 shmem_create+0x18/0x20 vfs_create+0xb5/0x130 do_last+0x9a1/0xea0 path_openat+0xb3/0x4d0 do_filp_open+0x42/0xa0 do_sys_open+0xfe/0x1e0 compat_sys_open+0x1b/0x20 cstar_dispatch+0x7/0x1f Non-debug kernels will not crash immediately because referencing the dangling mpol will not cause a fault. Instead the filesystem will reference a freed mempolicy object, which will cause unpredictable behavior. The problem boils down to a dropped mpol reference below if shmem_parse_options() does not allocate a new mpol: config = *sbinfo shmem_parse_options(data, &config, true) mpol_put(sbinfo->mpol) sbinfo->mpol = config.mpol /* BUG: saves unreferenced mpol */ This patch avoids the crash by not releasing the mempolicy if shmem_parse_options() doesn't create a new mpol. How far back does this issue go? I see it in both 2.6.36 and 3.3. I did not look back further. Signed-off-by: Greg Thelen <gthelen@google.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 07:36:01 +07:00
/*
* Preserve previous mempolicy unless mpol remount option was specified.
*/
if (ctx->mpol) {
tmpfs: fix use-after-free of mempolicy object The tmpfs remount logic preserves filesystem mempolicy if the mpol=M option is not specified in the remount request. A new policy can be specified if mpol=M is given. Before this patch remounting an mpol bound tmpfs without specifying mpol= mount option in the remount request would set the filesystem's mempolicy object to a freed mempolicy object. To reproduce the problem boot a DEBUG_PAGEALLOC kernel and run: # mkdir /tmp/x # mount -t tmpfs -o size=100M,mpol=interleave nodev /tmp/x # grep /tmp/x /proc/mounts nodev /tmp/x tmpfs rw,relatime,size=102400k,mpol=interleave:0-3 0 0 # mount -o remount,size=200M nodev /tmp/x # grep /tmp/x /proc/mounts nodev /tmp/x tmpfs rw,relatime,size=204800k,mpol=??? 0 0 # note ? garbage in mpol=... output above # dd if=/dev/zero of=/tmp/x/f count=1 # panic here Panic: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [< (null)>] (null) [...] Oops: 0010 [#1] SMP DEBUG_PAGEALLOC Call Trace: mpol_shared_policy_init+0xa5/0x160 shmem_get_inode+0x209/0x270 shmem_mknod+0x3e/0xf0 shmem_create+0x18/0x20 vfs_create+0xb5/0x130 do_last+0x9a1/0xea0 path_openat+0xb3/0x4d0 do_filp_open+0x42/0xa0 do_sys_open+0xfe/0x1e0 compat_sys_open+0x1b/0x20 cstar_dispatch+0x7/0x1f Non-debug kernels will not crash immediately because referencing the dangling mpol will not cause a fault. Instead the filesystem will reference a freed mempolicy object, which will cause unpredictable behavior. The problem boils down to a dropped mpol reference below if shmem_parse_options() does not allocate a new mpol: config = *sbinfo shmem_parse_options(data, &config, true) mpol_put(sbinfo->mpol) sbinfo->mpol = config.mpol /* BUG: saves unreferenced mpol */ This patch avoids the crash by not releasing the mempolicy if shmem_parse_options() doesn't create a new mpol. How far back does this issue go? I see it in both 2.6.36 and 3.3. I did not look back further. Signed-off-by: Greg Thelen <gthelen@google.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 07:36:01 +07:00
mpol_put(sbinfo->mpol);
sbinfo->mpol = ctx->mpol; /* transfers initial ref */
ctx->mpol = NULL;
tmpfs: fix use-after-free of mempolicy object The tmpfs remount logic preserves filesystem mempolicy if the mpol=M option is not specified in the remount request. A new policy can be specified if mpol=M is given. Before this patch remounting an mpol bound tmpfs without specifying mpol= mount option in the remount request would set the filesystem's mempolicy object to a freed mempolicy object. To reproduce the problem boot a DEBUG_PAGEALLOC kernel and run: # mkdir /tmp/x # mount -t tmpfs -o size=100M,mpol=interleave nodev /tmp/x # grep /tmp/x /proc/mounts nodev /tmp/x tmpfs rw,relatime,size=102400k,mpol=interleave:0-3 0 0 # mount -o remount,size=200M nodev /tmp/x # grep /tmp/x /proc/mounts nodev /tmp/x tmpfs rw,relatime,size=204800k,mpol=??? 0 0 # note ? garbage in mpol=... output above # dd if=/dev/zero of=/tmp/x/f count=1 # panic here Panic: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [< (null)>] (null) [...] Oops: 0010 [#1] SMP DEBUG_PAGEALLOC Call Trace: mpol_shared_policy_init+0xa5/0x160 shmem_get_inode+0x209/0x270 shmem_mknod+0x3e/0xf0 shmem_create+0x18/0x20 vfs_create+0xb5/0x130 do_last+0x9a1/0xea0 path_openat+0xb3/0x4d0 do_filp_open+0x42/0xa0 do_sys_open+0xfe/0x1e0 compat_sys_open+0x1b/0x20 cstar_dispatch+0x7/0x1f Non-debug kernels will not crash immediately because referencing the dangling mpol will not cause a fault. Instead the filesystem will reference a freed mempolicy object, which will cause unpredictable behavior. The problem boils down to a dropped mpol reference below if shmem_parse_options() does not allocate a new mpol: config = *sbinfo shmem_parse_options(data, &config, true) mpol_put(sbinfo->mpol) sbinfo->mpol = config.mpol /* BUG: saves unreferenced mpol */ This patch avoids the crash by not releasing the mempolicy if shmem_parse_options() doesn't create a new mpol. How far back does this issue go? I see it in both 2.6.36 and 3.3. I did not look back further. Signed-off-by: Greg Thelen <gthelen@google.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 07:36:01 +07:00
}
spin_unlock(&sbinfo->stat_lock);
return 0;
out:
spin_unlock(&sbinfo->stat_lock);
return invalfc(fc, "%s", err);
}
static int shmem_show_options(struct seq_file *seq, struct dentry *root)
{
struct shmem_sb_info *sbinfo = SHMEM_SB(root->d_sb);
if (sbinfo->max_blocks != shmem_default_max_blocks())
seq_printf(seq, ",size=%luk",
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
sbinfo->max_blocks << (PAGE_SHIFT - 10));
if (sbinfo->max_inodes != shmem_default_max_inodes())
seq_printf(seq, ",nr_inodes=%lu", sbinfo->max_inodes);
if (sbinfo->mode != (0777 | S_ISVTX))
seq_printf(seq, ",mode=%03ho", sbinfo->mode);
if (!uid_eq(sbinfo->uid, GLOBAL_ROOT_UID))
seq_printf(seq, ",uid=%u",
from_kuid_munged(&init_user_ns, sbinfo->uid));
if (!gid_eq(sbinfo->gid, GLOBAL_ROOT_GID))
seq_printf(seq, ",gid=%u",
from_kgid_munged(&init_user_ns, sbinfo->gid));
/*
* Showing inode{64,32} might be useful even if it's the system default,
* since then people don't have to resort to checking both here and
* /proc/config.gz to confirm 64-bit inums were successfully applied
* (which may not even exist if IKCONFIG_PROC isn't enabled).
*
* We hide it when inode64 isn't the default and we are using 32-bit
* inodes, since that probably just means the feature isn't even under
* consideration.
*
* As such:
*
* +-----------------+-----------------+
* | TMPFS_INODE64=y | TMPFS_INODE64=n |
* +------------------+-----------------+-----------------+
* | full_inums=true | show | show |
* | full_inums=false | show | hide |
* +------------------+-----------------+-----------------+
*
*/
if (IS_ENABLED(CONFIG_TMPFS_INODE64) || sbinfo->full_inums)
seq_printf(seq, ",inode%d", (sbinfo->full_inums ? 64 : 32));
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
shmem: prepare huge= mount option and sysfs knob This patch adds new mount option "huge=". It can have following values: - "always": Attempt to allocate huge pages every time we need a new page; - "never": Do not allocate huge pages; - "within_size": Only allocate huge page if it will be fully within i_size. Also respect fadvise()/madvise() hints; - "advise: Only allocate huge pages if requested with fadvise()/madvise(); Default is "never" for now. "mount -o remount,huge= /mountpoint" works fine after mount: remounting huge=never will not attempt to break up huge pages at all, just stop more from being allocated. No new config option: put this under CONFIG_TRANSPARENT_HUGEPAGE, which is the appropriate option to protect those who don't want the new bloat, and with which we shall share some pmd code. Prohibit the option when !CONFIG_TRANSPARENT_HUGEPAGE, just as mpol is invalid without CONFIG_NUMA (was hidden in mpol_parse_str(): make it explicit). Allow enabling THP only if the machine has_transparent_hugepage(). But what about Shmem with no user-visible mount? SysV SHM, memfds, shared anonymous mmaps (of /dev/zero or MAP_ANONYMOUS), GPU drivers' DRM objects, Ashmem. Though unlikely to suit all usages, provide sysfs knob /sys/kernel/mm/transparent_hugepage/shmem_enabled to experiment with huge on those. And allow shmem_enabled two further values: - "deny": For use in emergencies, to force the huge option off from all mounts; - "force": Force the huge option on for all - very useful for testing; Based on patch by Hugh Dickins. Link: http://lkml.kernel.org/r/1466021202-61880-28-git-send-email-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 05:26:13 +07:00
/* Rightly or wrongly, show huge mount option unmasked by shmem_huge */
if (sbinfo->huge)
seq_printf(seq, ",huge=%s", shmem_format_huge(sbinfo->huge));
#endif
mempolicy: use struct mempolicy pointer in shmem_sb_info This patch replaces the mempolicy mode, mode_flags, and nodemask in the shmem_sb_info struct with a struct mempolicy pointer, initialized to NULL. This removes dependency on the details of mempolicy from shmem.c and hugetlbfs inode.c and simplifies the interfaces. mpol_parse_str() in mempolicy.c is changed to return, via a pointer to a pointer arg, a struct mempolicy pointer on success. For MPOL_DEFAULT, the returned pointer is NULL. Further, mpol_parse_str() now takes a 'no_context' argument that causes the input nodemask to be stored in the w.user_nodemask of the created mempolicy for use when the mempolicy is installed in a tmpfs inode shared policy tree. At that time, any cpuset contextualization is applied to the original input nodemask. This preserves the previous behavior where the input nodemask was stored in the superblock. We can think of the returned mempolicy as "context free". Because mpol_parse_str() is now calling mpol_new(), we can remove from mpol_to_str() the semantic checks that mpol_new() already performs. Add 'no_context' parameter to mpol_to_str() to specify that it should format the nodemask in w.user_nodemask for 'bind' and 'interleave' policies. Change mpol_shared_policy_init() to take a pointer to a "context free" struct mempolicy and to create a new, "contextualized" mempolicy using the mode, mode_flags and user_nodemask from the input mempolicy. Note: we know that the mempolicy passed to mpol_to_str() or mpol_shared_policy_init() from a tmpfs superblock is "context free". This is currently the only instance thereof. However, if we found more uses for this concept, and introduced any ambiguity as to whether a mempolicy was context free or not, we could add another internal mode flag to identify context free mempolicies. Then, we could remove the 'no_context' argument from mpol_to_str(). Added shmem_get_sbmpol() to return a reference counted superblock mempolicy, if one exists, to pass to mpol_shared_policy_init(). We must add the reference under the sb stat_lock to prevent races with replacement of the mpol by remount. This reference is removed in mpol_shared_policy_init(). [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: another build fix] [akpm@linux-foundation.org: yet another build fix] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 16:13:26 +07:00
shmem_show_mpol(seq, sbinfo->mpol);
return 0;
}
#endif /* CONFIG_TMPFS */
static void shmem_put_super(struct super_block *sb)
{
struct shmem_sb_info *sbinfo = SHMEM_SB(sb);
tmpfs: per-superblock i_ino support Patch series "tmpfs: inode: Reduce risk of inum overflow", v7. In Facebook production we are seeing heavy i_ino wraparounds on tmpfs. On affected tiers, in excess of 10% of hosts show multiple files with different content and the same inode number, with some servers even having as many as 150 duplicated inode numbers with differing file content. This causes actual, tangible problems in production. For example, we have complaints from those working on remote caches that their application is reporting cache corruptions because it uses (device, inodenum) to establish the identity of a particular cache object, but because it's not unique any more, the application refuses to continue and reports cache corruption. Even worse, sometimes applications may not even detect the corruption but may continue anyway, causing phantom and hard to debug behaviour. In general, userspace applications expect that (device, inodenum) should be enough to be uniquely point to one inode, which seems fair enough. One might also need to check the generation, but in this case: 1. That's not currently exposed to userspace (ioctl(...FS_IOC_GETVERSION...) returns ENOTTY on tmpfs); 2. Even with generation, there shouldn't be two live inodes with the same inode number on one device. In order to mitigate this, we take a two-pronged approach: 1. Moving inum generation from being global to per-sb for tmpfs. This itself allows some reduction in i_ino churn. This works on both 64- and 32- bit machines. 2. Adding inode{64,32} for tmpfs. This fix is supported on machines with 64-bit ino_t only: we allow users to mount tmpfs with a new inode64 option that uses the full width of ino_t, or CONFIG_TMPFS_INODE64. You can see how this compares to previous related patches which didn't implement this per-superblock: - https://patchwork.kernel.org/patch/11254001/ - https://patchwork.kernel.org/patch/11023915/ This patch (of 2): get_next_ino has a number of problems: - It uses and returns a uint, which is susceptible to become overflowed if a lot of volatile inodes that use get_next_ino are created. - It's global, with no specificity per-sb or even per-filesystem. This means it's not that difficult to cause inode number wraparounds on a single device, which can result in having multiple distinct inodes with the same inode number. This patch adds a per-superblock counter that mitigates the second case. This design also allows us to later have a specific i_ino size per-device, for example, allowing users to choose whether to use 32- or 64-bit inodes for each tmpfs mount. This is implemented in the next commit. For internal shmem mounts which may be less tolerant to spinlock delays, we implement a percpu batching scheme which only takes the stat_lock at each batch boundary. Signed-off-by: Chris Down <chris@chrisdown.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hugh Dickins <hughd@google.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/cover.1594661218.git.chris@chrisdown.name Link: http://lkml.kernel.org/r/1986b9d63b986f08ec07a4aa4b2275e718e47d8a.1594661218.git.chris@chrisdown.name Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 13:20:20 +07:00
free_percpu(sbinfo->ino_batch);
percpu_counter_destroy(&sbinfo->used_blocks);
mpol_put(sbinfo->mpol);
kfree(sbinfo);
sb->s_fs_info = NULL;
}
static int shmem_fill_super(struct super_block *sb, struct fs_context *fc)
{
struct shmem_options *ctx = fc->fs_private;
struct inode *inode;
struct shmem_sb_info *sbinfo;
int err = -ENOMEM;
/* Round up to L1_CACHE_BYTES to resist false sharing */
shmem: initialize struct shmem_sb_info to zero Fixes the following kmemcheck false positive (the compiler is using a 32-bit mov to load the 16-bit sbinfo->mode in shmem_fill_super): [ 0.337000] Total of 1 processors activated (3088.38 BogoMIPS). [ 0.352000] CPU0 attaching NULL sched-domain. [ 0.360000] WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (9f8020fc) [ 0.361000] a44240820000000041f6998100000000000000000000000000000000ff030000 [ 0.368000] i i i i i i i i i i i i i i i i u u u u i i i i i i i i i i u u [ 0.375000] ^ [ 0.376000] [ 0.377000] Pid: 9, comm: khelper Not tainted (2.6.31-tip #206) P4DC6 [ 0.378000] EIP: 0060:[<810a3a95>] EFLAGS: 00010246 CPU: 0 [ 0.379000] EIP is at shmem_fill_super+0xb5/0x120 [ 0.380000] EAX: 00000000 EBX: 9f845400 ECX: 824042a4 EDX: 8199f641 [ 0.381000] ESI: 9f8020c0 EDI: 9f845400 EBP: 9f81af68 ESP: 81cd6eec [ 0.382000] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 0.383000] CR0: 8005003b CR2: 9f806200 CR3: 01ccd000 CR4: 000006d0 [ 0.384000] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 0.385000] DR6: ffff4ff0 DR7: 00000400 [ 0.386000] [<810c25fc>] get_sb_nodev+0x3c/0x80 [ 0.388000] [<810a3514>] shmem_get_sb+0x14/0x20 [ 0.390000] [<810c207f>] vfs_kern_mount+0x4f/0x120 [ 0.392000] [<81b2849e>] init_tmpfs+0x7e/0xb0 [ 0.394000] [<81b11597>] do_basic_setup+0x17/0x30 [ 0.396000] [<81b11907>] kernel_init+0x57/0xa0 [ 0.398000] [<810039b7>] kernel_thread_helper+0x7/0x10 [ 0.400000] [<ffffffff>] 0xffffffff [ 0.402000] khelper used greatest stack depth: 2820 bytes left [ 0.407000] calling init_mmap_min_addr+0x0/0x10 @ 1 [ 0.408000] initcall init_mmap_min_addr+0x0/0x10 returned 0 after 0 usecs Reported-by: Ingo Molnar <mingo@elte.hu> Analysed-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:03:50 +07:00
sbinfo = kzalloc(max((int)sizeof(struct shmem_sb_info),
L1_CACHE_BYTES), GFP_KERNEL);
if (!sbinfo)
return -ENOMEM;
sb->s_fs_info = sbinfo;
#ifdef CONFIG_TMPFS
/*
* Per default we only allow half of the physical ram per
* tmpfs instance, limiting inodes to one per page of lowmem;
* but the internal instance is left unlimited.
*/
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-28 04:05:09 +07:00
if (!(sb->s_flags & SB_KERNMOUNT)) {
if (!(ctx->seen & SHMEM_SEEN_BLOCKS))
ctx->blocks = shmem_default_max_blocks();
if (!(ctx->seen & SHMEM_SEEN_INODES))
ctx->inodes = shmem_default_max_inodes();
if (!(ctx->seen & SHMEM_SEEN_INUMS))
ctx->full_inums = IS_ENABLED(CONFIG_TMPFS_INODE64);
} else {
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-28 04:05:09 +07:00
sb->s_flags |= SB_NOUSER;
}
[PATCH] knfsd: add nfs-export support to tmpfs We need to encode a decode the 'file' part of a handle. We simply use the inode number and generation number to construct the filehandle. The generation number is the time when the file was created. As inode numbers cycle through the full 32 bits before being reused, there is no real chance of the same inum being allocated to different files in the same second so this is suitably unique. Using time-of-day rather than e.g. jiffies makes it less likely that the same filehandle can be created after a reboot. In order to be able to decode a filehandle we need to be able to lookup by inum, which means that the inode needs to be added to the inode hash table (tmpfs doesn't currently hash inodes as there is never a need to lookup by inum). To avoid overhead when not exporting, we only hash an inode when it is first exported. This requires a lock to ensure it isn't hashed twice. This code is separate from the patch posted in June06 from Atal Shargorodsky which provided the same functionality, but does borrow slightly from it. Locking comment: Most filesystems that hash their inodes do so at the point where the 'struct inode' is initialised, and that has suitable locking (I_NEW). Here in shmem, we are hashing the inode later, the first time we need an NFS file handle for it. We no longer have I_NEW to ensure only one thread tries to add it to the hash table. Cc: Atal Shargorodsky <atal@codefidence.com> Cc: Gilad Ben-Yossef <gilad@codefidence.com> Signed-off-by: David M. Grimes <dgrimes@navisite.com> Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17 14:09:45 +07:00
sb->s_export_op = &shmem_export_ops;
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-28 04:05:09 +07:00
sb->s_flags |= SB_NOSEC;
#else
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-28 04:05:09 +07:00
sb->s_flags |= SB_NOUSER;
#endif
sbinfo->max_blocks = ctx->blocks;
sbinfo->free_inodes = sbinfo->max_inodes = ctx->inodes;
tmpfs: per-superblock i_ino support Patch series "tmpfs: inode: Reduce risk of inum overflow", v7. In Facebook production we are seeing heavy i_ino wraparounds on tmpfs. On affected tiers, in excess of 10% of hosts show multiple files with different content and the same inode number, with some servers even having as many as 150 duplicated inode numbers with differing file content. This causes actual, tangible problems in production. For example, we have complaints from those working on remote caches that their application is reporting cache corruptions because it uses (device, inodenum) to establish the identity of a particular cache object, but because it's not unique any more, the application refuses to continue and reports cache corruption. Even worse, sometimes applications may not even detect the corruption but may continue anyway, causing phantom and hard to debug behaviour. In general, userspace applications expect that (device, inodenum) should be enough to be uniquely point to one inode, which seems fair enough. One might also need to check the generation, but in this case: 1. That's not currently exposed to userspace (ioctl(...FS_IOC_GETVERSION...) returns ENOTTY on tmpfs); 2. Even with generation, there shouldn't be two live inodes with the same inode number on one device. In order to mitigate this, we take a two-pronged approach: 1. Moving inum generation from being global to per-sb for tmpfs. This itself allows some reduction in i_ino churn. This works on both 64- and 32- bit machines. 2. Adding inode{64,32} for tmpfs. This fix is supported on machines with 64-bit ino_t only: we allow users to mount tmpfs with a new inode64 option that uses the full width of ino_t, or CONFIG_TMPFS_INODE64. You can see how this compares to previous related patches which didn't implement this per-superblock: - https://patchwork.kernel.org/patch/11254001/ - https://patchwork.kernel.org/patch/11023915/ This patch (of 2): get_next_ino has a number of problems: - It uses and returns a uint, which is susceptible to become overflowed if a lot of volatile inodes that use get_next_ino are created. - It's global, with no specificity per-sb or even per-filesystem. This means it's not that difficult to cause inode number wraparounds on a single device, which can result in having multiple distinct inodes with the same inode number. This patch adds a per-superblock counter that mitigates the second case. This design also allows us to later have a specific i_ino size per-device, for example, allowing users to choose whether to use 32- or 64-bit inodes for each tmpfs mount. This is implemented in the next commit. For internal shmem mounts which may be less tolerant to spinlock delays, we implement a percpu batching scheme which only takes the stat_lock at each batch boundary. Signed-off-by: Chris Down <chris@chrisdown.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hugh Dickins <hughd@google.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/cover.1594661218.git.chris@chrisdown.name Link: http://lkml.kernel.org/r/1986b9d63b986f08ec07a4aa4b2275e718e47d8a.1594661218.git.chris@chrisdown.name Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 13:20:20 +07:00
if (sb->s_flags & SB_KERNMOUNT) {
sbinfo->ino_batch = alloc_percpu(ino_t);
if (!sbinfo->ino_batch)
goto failed;
}
sbinfo->uid = ctx->uid;
sbinfo->gid = ctx->gid;
sbinfo->full_inums = ctx->full_inums;
sbinfo->mode = ctx->mode;
sbinfo->huge = ctx->huge;
sbinfo->mpol = ctx->mpol;
ctx->mpol = NULL;
spin_lock_init(&sbinfo->stat_lock);
if (percpu_counter_init(&sbinfo->used_blocks, 0, GFP_KERNEL))
goto failed;
spin_lock_init(&sbinfo->shrinklist_lock);
INIT_LIST_HEAD(&sbinfo->shrinklist);
tmpfs: demolish old swap vector support The maximum size of a shmem/tmpfs file has been limited by the maximum size of its triple-indirect swap vector. With 4kB page size, maximum filesize was just over 2TB on a 32-bit kernel, but sadly one eighth of that on a 64-bit kernel. (With 8kB page size, maximum filesize was just over 4TB on a 64-bit kernel, but 16TB on a 32-bit kernel, MAX_LFS_FILESIZE being then more restrictive than swap vector layout.) It's a shame that tmpfs should be more restrictive than ramfs, and this limitation has now been noticed. Add another level to the swap vector? No, it became obscure and hard to maintain, once I complicated it to make use of highmem pages nine years ago: better choose another way. Surely, if 2.4 had had the radix tree pagecache introduced in 2.5, then tmpfs would never have invented its own peculiar radix tree: we would have fitted swap entries into the common radix tree instead, in much the same way as we fit swap entries into page tables. And why should each file have a separate radix tree for its pages and for its swap entries? The swap entries are required precisely where and when the pages are not. We want to put them together in a single radix tree: which can then avoid much of the locking which was needed to prevent them from being exchanged underneath us. This also avoids the waste of memory devoted to swap vectors, first in the shmem_inode itself, then at least two more pages once a file grew beyond 16 data pages (pages accounted by df and du, but not by memcg). Allocated upfront, to avoid allocation when under swapping pressure, but pure waste when CONFIG_SWAP is not set - I have never spattered around the ifdefs to prevent that, preferring this move to sharing the common radix tree instead. There are three downsides to sharing the radix tree. One, that it binds tmpfs more tightly to the rest of mm, either requiring knowledge of swap entries in radix tree there, or duplication of its code here in shmem.c. I believe that the simplications and memory savings (and probable higher performance, not yet measured) justify that. Two, that on HIGHMEM systems with SWAP enabled, it's the lowmem radix nodes that cannot be freed under memory pressure - whereas before it was the less precious highmem swap vector pages that could not be freed. I'm hoping that 64-bit has now been accessible for long enough, that the highmem argument has grown much less persuasive. Three, that swapoff is slower than it used to be on tmpfs files, since it's using a simple generic mechanism not tailored to it: I find this noticeable, and shall want to improve, but maybe nobody else will notice. So... now remove most of the old swap vector code from shmem.c. But, for the moment, keep the simple i_direct vector of 16 pages, with simple accessors shmem_put_swap() and shmem_get_swap(), as a toy implementation to help mark where swap needs to be handled in subsequent patches. Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-04 06:21:20 +07:00
sb->s_maxbytes = MAX_LFS_FILESIZE;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 19:29:47 +07:00
sb->s_blocksize = PAGE_SIZE;
sb->s_blocksize_bits = PAGE_SHIFT;
sb->s_magic = TMPFS_MAGIC;
sb->s_op = &shmem_ops;
sb->s_time_gran = 1;
tmpfs: implement generic xattr support Implement generic xattrs for tmpfs filesystems. The Feodra project, while trying to replace suid apps with file capabilities, realized that tmpfs, which is used on the build systems, does not support file capabilities and thus cannot be used to build packages which use file capabilities. Xattrs are also needed for overlayfs. The xattr interface is a bit odd. If a filesystem does not implement any {get,set,list}xattr functions the VFS will call into some random LSM hooks and the running LSM can then implement some method for handling xattrs. SELinux for example provides a method to support security.selinux but no other security.* xattrs. As it stands today when one enables CONFIG_TMPFS_POSIX_ACL tmpfs will have xattr handler routines specifically to handle acls. Because of this tmpfs would loose the VFS/LSM helpers to support the running LSM. To make up for that tmpfs had stub functions that did nothing but call into the LSM hooks which implement the helpers. This new patch does not use the LSM fallback functions and instead just implements a native get/set/list xattr feature for the full security.* and trusted.* namespace like a normal filesystem. This means that tmpfs can now support both security.selinux and security.capability, which was not previously possible. The basic implementation is that I attach a: struct shmem_xattr { struct list_head list; /* anchored by shmem_inode_info->xattr_list */ char *name; size_t size; char value[0]; }; Into the struct shmem_inode_info for each xattr that is set. This implementation could easily support the user.* namespace as well, except some care needs to be taken to prevent large amounts of unswappable memory being allocated for unprivileged users. [mszeredi@suse.cz: new config option, suport trusted.*, support symlinks] Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com> Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Hugh Dickins <hughd@google.com> Tested-by: Jordi Pujol <jordipujolp@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 07:12:39 +07:00
#ifdef CONFIG_TMPFS_XATTR
sb->s_xattr = shmem_xattr_handlers;
tmpfs: implement generic xattr support Implement generic xattrs for tmpfs filesystems. The Feodra project, while trying to replace suid apps with file capabilities, realized that tmpfs, which is used on the build systems, does not support file capabilities and thus cannot be used to build packages which use file capabilities. Xattrs are also needed for overlayfs. The xattr interface is a bit odd. If a filesystem does not implement any {get,set,list}xattr functions the VFS will call into some random LSM hooks and the running LSM can then implement some method for handling xattrs. SELinux for example provides a method to support security.selinux but no other security.* xattrs. As it stands today when one enables CONFIG_TMPFS_POSIX_ACL tmpfs will have xattr handler routines specifically to handle acls. Because of this tmpfs would loose the VFS/LSM helpers to support the running LSM. To make up for that tmpfs had stub functions that did nothing but call into the LSM hooks which implement the helpers. This new patch does not use the LSM fallback functions and instead just implements a native get/set/list xattr feature for the full security.* and trusted.* namespace like a normal filesystem. This means that tmpfs can now support both security.selinux and security.capability, which was not previously possible. The basic implementation is that I attach a: struct shmem_xattr { struct list_head list; /* anchored by shmem_inode_info->xattr_list */ char *name; size_t size; char value[0]; }; Into the struct shmem_inode_info for each xattr that is set. This implementation could easily support the user.* namespace as well, except some care needs to be taken to prevent large amounts of unswappable memory being allocated for unprivileged users. [mszeredi@suse.cz: new config option, suport trusted.*, support symlinks] Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com> Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Hugh Dickins <hughd@google.com> Tested-by: Jordi Pujol <jordipujolp@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 07:12:39 +07:00
#endif
#ifdef CONFIG_TMPFS_POSIX_ACL
Rename superblock flags (MS_xyz -> SB_xyz) This is a pure automated search-and-replace of the internal kernel superblock flags. The s_flags are now called SB_*, with the names and the values for the moment mirroring the MS_* flags that they're equivalent to. Note how the MS_xyz flags are the ones passed to the mount system call, while the SB_xyz flags are what we then use in sb->s_flags. The script to do this was: # places to look in; re security/*: it generally should *not* be # touched (that stuff parses mount(2) arguments directly), but # there are two places where we really deal with superblock flags. FILES="drivers/mtd drivers/staging/lustre fs ipc mm \ include/linux/fs.h include/uapi/linux/bfs_fs.h \ security/apparmor/apparmorfs.c security/apparmor/include/lib.h" # the list of MS_... constants SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \ DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \ POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \ I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \ ACTIVE NOUSER" SED_PROG= for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done # we want files that contain at least one of MS_..., # with fs/namespace.c and fs/pnode.c excluded. L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c') for f in $L; do sed -i $f $SED_PROG; done Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-28 04:05:09 +07:00
sb->s_flags |= SB_POSIXACL;
#endif
uuid_gen(&sb->s_uuid);
inode = shmem_get_inode(sb, NULL, S_IFDIR | sbinfo->mode, 0, VM_NORESERVE);
if (!inode)
goto failed;
inode->i_uid = sbinfo->uid;
inode->i_gid = sbinfo->gid;
sb->s_root = d_make_root(inode);
if (!sb->s_root)
goto failed;
return 0;
failed:
shmem_put_super(sb);
return err;
}
static int shmem_get_tree(struct fs_context *fc)
{
return get_tree_nodev(fc, shmem_fill_super);
}
static void shmem_free_fc(struct fs_context *fc)
{
struct shmem_options *ctx = fc->fs_private;
if (ctx) {
mpol_put(ctx->mpol);
kfree(ctx);
}
}
static const struct fs_context_operations shmem_fs_context_ops = {
.free = shmem_free_fc,
.get_tree = shmem_get_tree,
#ifdef CONFIG_TMPFS
.parse_monolithic = shmem_parse_options,
.parse_param = shmem_parse_one,
.reconfigure = shmem_reconfigure,
#endif
};
static struct kmem_cache *shmem_inode_cachep;
static struct inode *shmem_alloc_inode(struct super_block *sb)
{
struct shmem_inode_info *info;
info = kmem_cache_alloc(shmem_inode_cachep, GFP_KERNEL);
if (!info)
return NULL;
return &info->vfs_inode;
}
static void shmem_free_in_core_inode(struct inode *inode)
2011-01-07 13:49:49 +07:00
{
parallel lookups machinery, part 2 We'll need to verify that there's neither a hashed nor in-lookup dentry with desired parent/name before adding to in-lookup set. One possible solution would be to hold the parent's ->d_lock through both checks, but while the in-lookup set is relatively small at any time, dcache is not. And holding the parent's ->d_lock through something like __d_lookup_rcu() would suck too badly. So we leave the parent's ->d_lock alone, which means that we watch out for the following scenario: * we verify that there's no hashed match * existing in-lookup match gets hashed by another process * we verify that there's no in-lookup matches and decide that everything's fine. Solution: per-directory kinda-sorta seqlock, bumped around the times we hash something that used to be in-lookup or move (and hash) something in place of in-lookup. Then the above would turn into * read the counter * do dcache lookup * if no matches found, check for in-lookup matches * if there had been none of those either, check if the counter has changed; repeat if it has. The "kinda-sorta" part is due to the fact that we don't have much spare space in inode. There is a spare word (shared with i_bdev/i_cdev/i_pipe), so the counter part is not a problem, but spinlock is a different story. We could use the parent's ->d_lock, and it would be less painful in terms of contention, for __d_add() it would be rather inconvenient to grab; we could do that (using lock_parent()), but... Fortunately, we can get serialization on the counter itself, and it might be a good idea in general; we can use cmpxchg() in a loop to get from even to odd and smp_store_release() from odd to even. This commit adds the counter and updating logics; the readers will be added in the next commit. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-15 11:58:55 +07:00
if (S_ISLNK(inode->i_mode))
kfree(inode->i_link);
2011-01-07 13:49:49 +07:00
kmem_cache_free(shmem_inode_cachep, SHMEM_I(inode));
}
static void shmem_destroy_inode(struct inode *inode)
{
if (S_ISREG(inode->i_mode))
mpol_free_shared_policy(&SHMEM_I(inode)->policy);
}
static void shmem_init_inode(void *foo)
{
struct shmem_inode_info *info = foo;
inode_init_once(&info->vfs_inode);
}
static void shmem_init_inodecache(void)
{
shmem_inode_cachep = kmem_cache_create("shmem_inode_cache",
sizeof(struct shmem_inode_info),
2016-01-15 06:18:21 +07:00
0, SLAB_PANIC|SLAB_ACCOUNT, shmem_init_inode);
}
static void shmem_destroy_inodecache(void)
{
kmem_cache_destroy(shmem_inode_cachep);
}
static const struct address_space_operations shmem_aops = {
.writepage = shmem_writepage,
.set_page_dirty = __set_page_dirty_no_writeback,
#ifdef CONFIG_TMPFS
.write_begin = shmem_write_begin,
.write_end = shmem_write_end,
#endif
#ifdef CONFIG_MIGRATION
.migratepage = migrate_page,
#endif
.error_remove_page = generic_error_remove_page,
};
static const struct file_operations shmem_file_operations = {
.mmap = shmem_mmap,
.get_unmapped_area = shmem_get_unmapped_area,
#ifdef CONFIG_TMPFS
.llseek = shmem_file_llseek,
.read_iter = shmem_file_read_iter,
.write_iter = generic_file_write_iter,
.fsync = noop_fsync,
.splice_read = generic_file_splice_read,
.splice_write = iter_file_splice_write,
.fallocate = shmem_fallocate,
#endif
};
static const struct inode_operations shmem_inode_operations = {
.getattr = shmem_getattr,
tmpfs: take control of its truncate_range 2.6.35's new truncate convention gave tmpfs the opportunity to control its file truncation, no longer enforced from outside by vmtruncate(). We shall want to build upon that, to handle pagecache and swap together. Slightly redefine the ->truncate_range interface: let it now be called between the unmap_mapping_range()s, with the filesystem responsible for doing the truncate_inode_pages_range() from it - just as the filesystem is nowadays responsible for doing that from its ->setattr. Let's rename shmem_notify_change() to shmem_setattr(). Instead of calling the generic truncate_setsize(), bring that code in so we can call shmem_truncate_range() - which will later be updated to perform its own variant of truncate_inode_pages_range(). Remove the punch_hole unmap_mapping_range() from shmem_truncate_range(): now that the COW's unmap_mapping_range() comes after ->truncate_range, there is no need to call it a third time. Export shmem_truncate_range() and add it to the list in shmem_fs.h, so that i915_gem_object_truncate() can call it explicitly in future; get this patch in first, then update drm/i915 once this is available (until then, i915 will just be doing the truncate_inode_pages() twice). Though introduced five years ago, no other filesystem is implementing ->truncate_range, and its only other user is madvise(,,MADV_REMOVE): we expect to convert it to fallocate(,FALLOC_FL_PUNCH_HOLE,,) shortly, whereupon ->truncate_range can be removed from inode_operations - shmem_truncate_range() will help i915 across that transition too. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-28 06:18:03 +07:00
.setattr = shmem_setattr,
tmpfs: implement generic xattr support Implement generic xattrs for tmpfs filesystems. The Feodra project, while trying to replace suid apps with file capabilities, realized that tmpfs, which is used on the build systems, does not support file capabilities and thus cannot be used to build packages which use file capabilities. Xattrs are also needed for overlayfs. The xattr interface is a bit odd. If a filesystem does not implement any {get,set,list}xattr functions the VFS will call into some random LSM hooks and the running LSM can then implement some method for handling xattrs. SELinux for example provides a method to support security.selinux but no other security.* xattrs. As it stands today when one enables CONFIG_TMPFS_POSIX_ACL tmpfs will have xattr handler routines specifically to handle acls. Because of this tmpfs would loose the VFS/LSM helpers to support the running LSM. To make up for that tmpfs had stub functions that did nothing but call into the LSM hooks which implement the helpers. This new patch does not use the LSM fallback functions and instead just implements a native get/set/list xattr feature for the full security.* and trusted.* namespace like a normal filesystem. This means that tmpfs can now support both security.selinux and security.capability, which was not previously possible. The basic implementation is that I attach a: struct shmem_xattr { struct list_head list; /* anchored by shmem_inode_info->xattr_list */ char *name; size_t size; char value[0]; }; Into the struct shmem_inode_info for each xattr that is set. This implementation could easily support the user.* namespace as well, except some care needs to be taken to prevent large amounts of unswappable memory being allocated for unprivileged users. [mszeredi@suse.cz: new config option, suport trusted.*, support symlinks] Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com> Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Hugh Dickins <hughd@google.com> Tested-by: Jordi Pujol <jordipujolp@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 07:12:39 +07:00
#ifdef CONFIG_TMPFS_XATTR
.listxattr = shmem_listxattr,
.set_acl = simple_set_acl,
tmpfs: implement generic xattr support Implement generic xattrs for tmpfs filesystems. The Feodra project, while trying to replace suid apps with file capabilities, realized that tmpfs, which is used on the build systems, does not support file capabilities and thus cannot be used to build packages which use file capabilities. Xattrs are also needed for overlayfs. The xattr interface is a bit odd. If a filesystem does not implement any {get,set,list}xattr functions the VFS will call into some random LSM hooks and the running LSM can then implement some method for handling xattrs. SELinux for example provides a method to support security.selinux but no other security.* xattrs. As it stands today when one enables CONFIG_TMPFS_POSIX_ACL tmpfs will have xattr handler routines specifically to handle acls. Because of this tmpfs would loose the VFS/LSM helpers to support the running LSM. To make up for that tmpfs had stub functions that did nothing but call into the LSM hooks which implement the helpers. This new patch does not use the LSM fallback functions and instead just implements a native get/set/list xattr feature for the full security.* and trusted.* namespace like a normal filesystem. This means that tmpfs can now support both security.selinux and security.capability, which was not previously possible. The basic implementation is that I attach a: struct shmem_xattr { struct list_head list; /* anchored by shmem_inode_info->xattr_list */ char *name; size_t size; char value[0]; }; Into the struct shmem_inode_info for each xattr that is set. This implementation could easily support the user.* namespace as well, except some care needs to be taken to prevent large amounts of unswappable memory being allocated for unprivileged users. [mszeredi@suse.cz: new config option, suport trusted.*, support symlinks] Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com> Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Hugh Dickins <hughd@google.com> Tested-by: Jordi Pujol <jordipujolp@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 07:12:39 +07:00
#endif
};
static const struct inode_operations shmem_dir_inode_operations = {
#ifdef CONFIG_TMPFS
.create = shmem_create,
.lookup = simple_lookup,
.link = shmem_link,
.unlink = shmem_unlink,
.symlink = shmem_symlink,
.mkdir = shmem_mkdir,
.rmdir = shmem_rmdir,
.mknod = shmem_mknod,
.rename = shmem_rename2,
.tmpfile = shmem_tmpfile,
#endif
tmpfs: implement generic xattr support Implement generic xattrs for tmpfs filesystems. The Feodra project, while trying to replace suid apps with file capabilities, realized that tmpfs, which is used on the build systems, does not support file capabilities and thus cannot be used to build packages which use file capabilities. Xattrs are also needed for overlayfs. The xattr interface is a bit odd. If a filesystem does not implement any {get,set,list}xattr functions the VFS will call into some random LSM hooks and the running LSM can then implement some method for handling xattrs. SELinux for example provides a method to support security.selinux but no other security.* xattrs. As it stands today when one enables CONFIG_TMPFS_POSIX_ACL tmpfs will have xattr handler routines specifically to handle acls. Because of this tmpfs would loose the VFS/LSM helpers to support the running LSM. To make up for that tmpfs had stub functions that did nothing but call into the LSM hooks which implement the helpers. This new patch does not use the LSM fallback functions and instead just implements a native get/set/list xattr feature for the full security.* and trusted.* namespace like a normal filesystem. This means that tmpfs can now support both security.selinux and security.capability, which was not previously possible. The basic implementation is that I attach a: struct shmem_xattr { struct list_head list; /* anchored by shmem_inode_info->xattr_list */ char *name; size_t size; char value[0]; }; Into the struct shmem_inode_info for each xattr that is set. This implementation could easily support the user.* namespace as well, except some care needs to be taken to prevent large amounts of unswappable memory being allocated for unprivileged users. [mszeredi@suse.cz: new config option, suport trusted.*, support symlinks] Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com> Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Hugh Dickins <hughd@google.com> Tested-by: Jordi Pujol <jordipujolp@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 07:12:39 +07:00
#ifdef CONFIG_TMPFS_XATTR
.listxattr = shmem_listxattr,
#endif
#ifdef CONFIG_TMPFS_POSIX_ACL
tmpfs: take control of its truncate_range 2.6.35's new truncate convention gave tmpfs the opportunity to control its file truncation, no longer enforced from outside by vmtruncate(). We shall want to build upon that, to handle pagecache and swap together. Slightly redefine the ->truncate_range interface: let it now be called between the unmap_mapping_range()s, with the filesystem responsible for doing the truncate_inode_pages_range() from it - just as the filesystem is nowadays responsible for doing that from its ->setattr. Let's rename shmem_notify_change() to shmem_setattr(). Instead of calling the generic truncate_setsize(), bring that code in so we can call shmem_truncate_range() - which will later be updated to perform its own variant of truncate_inode_pages_range(). Remove the punch_hole unmap_mapping_range() from shmem_truncate_range(): now that the COW's unmap_mapping_range() comes after ->truncate_range, there is no need to call it a third time. Export shmem_truncate_range() and add it to the list in shmem_fs.h, so that i915_gem_object_truncate() can call it explicitly in future; get this patch in first, then update drm/i915 once this is available (until then, i915 will just be doing the truncate_inode_pages() twice). Though introduced five years ago, no other filesystem is implementing ->truncate_range, and its only other user is madvise(,,MADV_REMOVE): we expect to convert it to fallocate(,FALLOC_FL_PUNCH_HOLE,,) shortly, whereupon ->truncate_range can be removed from inode_operations - shmem_truncate_range() will help i915 across that transition too. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-28 06:18:03 +07:00
.setattr = shmem_setattr,
.set_acl = simple_set_acl,
#endif
};
static const struct inode_operations shmem_special_inode_operations = {
tmpfs: implement generic xattr support Implement generic xattrs for tmpfs filesystems. The Feodra project, while trying to replace suid apps with file capabilities, realized that tmpfs, which is used on the build systems, does not support file capabilities and thus cannot be used to build packages which use file capabilities. Xattrs are also needed for overlayfs. The xattr interface is a bit odd. If a filesystem does not implement any {get,set,list}xattr functions the VFS will call into some random LSM hooks and the running LSM can then implement some method for handling xattrs. SELinux for example provides a method to support security.selinux but no other security.* xattrs. As it stands today when one enables CONFIG_TMPFS_POSIX_ACL tmpfs will have xattr handler routines specifically to handle acls. Because of this tmpfs would loose the VFS/LSM helpers to support the running LSM. To make up for that tmpfs had stub functions that did nothing but call into the LSM hooks which implement the helpers. This new patch does not use the LSM fallback functions and instead just implements a native get/set/list xattr feature for the full security.* and trusted.* namespace like a normal filesystem. This means that tmpfs can now support both security.selinux and security.capability, which was not previously possible. The basic implementation is that I attach a: struct shmem_xattr { struct list_head list; /* anchored by shmem_inode_info->xattr_list */ char *name; size_t size; char value[0]; }; Into the struct shmem_inode_info for each xattr that is set. This implementation could easily support the user.* namespace as well, except some care needs to be taken to prevent large amounts of unswappable memory being allocated for unprivileged users. [mszeredi@suse.cz: new config option, suport trusted.*, support symlinks] Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com> Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Hugh Dickins <hughd@google.com> Tested-by: Jordi Pujol <jordipujolp@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 07:12:39 +07:00
#ifdef CONFIG_TMPFS_XATTR
.listxattr = shmem_listxattr,
#endif
#ifdef CONFIG_TMPFS_POSIX_ACL
tmpfs: take control of its truncate_range 2.6.35's new truncate convention gave tmpfs the opportunity to control its file truncation, no longer enforced from outside by vmtruncate(). We shall want to build upon that, to handle pagecache and swap together. Slightly redefine the ->truncate_range interface: let it now be called between the unmap_mapping_range()s, with the filesystem responsible for doing the truncate_inode_pages_range() from it - just as the filesystem is nowadays responsible for doing that from its ->setattr. Let's rename shmem_notify_change() to shmem_setattr(). Instead of calling the generic truncate_setsize(), bring that code in so we can call shmem_truncate_range() - which will later be updated to perform its own variant of truncate_inode_pages_range(). Remove the punch_hole unmap_mapping_range() from shmem_truncate_range(): now that the COW's unmap_mapping_range() comes after ->truncate_range, there is no need to call it a third time. Export shmem_truncate_range() and add it to the list in shmem_fs.h, so that i915_gem_object_truncate() can call it explicitly in future; get this patch in first, then update drm/i915 once this is available (until then, i915 will just be doing the truncate_inode_pages() twice). Though introduced five years ago, no other filesystem is implementing ->truncate_range, and its only other user is madvise(,,MADV_REMOVE): we expect to convert it to fallocate(,FALLOC_FL_PUNCH_HOLE,,) shortly, whereupon ->truncate_range can be removed from inode_operations - shmem_truncate_range() will help i915 across that transition too. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-28 06:18:03 +07:00
.setattr = shmem_setattr,
.set_acl = simple_set_acl,
#endif
};
static const struct super_operations shmem_ops = {
.alloc_inode = shmem_alloc_inode,
.free_inode = shmem_free_in_core_inode,
.destroy_inode = shmem_destroy_inode,
#ifdef CONFIG_TMPFS
.statfs = shmem_statfs,
.show_options = shmem_show_options,
#endif
.evict_inode = shmem_evict_inode,
.drop_inode = generic_delete_inode,
.put_super = shmem_put_super,
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
.nr_cached_objects = shmem_unused_huge_count,
.free_cached_objects = shmem_unused_huge_scan,
#endif
};
static const struct vm_operations_struct shmem_vm_ops = {
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 15:46:59 +07:00
.fault = shmem_fault,
.map_pages = filemap_map_pages,
#ifdef CONFIG_NUMA
.set_policy = shmem_set_policy,
.get_policy = shmem_get_policy,
#endif
};
int shmem_init_fs_context(struct fs_context *fc)
{
struct shmem_options *ctx;
ctx = kzalloc(sizeof(struct shmem_options), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
ctx->mode = 0777 | S_ISVTX;
ctx->uid = current_fsuid();
ctx->gid = current_fsgid();
fc->fs_private = ctx;
fc->ops = &shmem_fs_context_ops;
return 0;
}
static struct file_system_type shmem_fs_type = {
.owner = THIS_MODULE,
.name = "tmpfs",
.init_fs_context = shmem_init_fs_context,
#ifdef CONFIG_TMPFS
.parameters = shmem_fs_parameters,
#endif
.kill_sb = kill_litter_super,
.fs_flags = FS_USERNS_MOUNT,
};
int __init shmem_init(void)
{
int error;
shmem_init_inodecache();
error = register_filesystem(&shmem_fs_type);
if (error) {
pr_err("Could not register tmpfs\n");
goto out2;
}
shm_mnt = kern_mount(&shmem_fs_type);
if (IS_ERR(shm_mnt)) {
error = PTR_ERR(shm_mnt);
pr_err("Could not kern_mount tmpfs\n");
goto out1;
}
shmem: prepare huge= mount option and sysfs knob This patch adds new mount option "huge=". It can have following values: - "always": Attempt to allocate huge pages every time we need a new page; - "never": Do not allocate huge pages; - "within_size": Only allocate huge page if it will be fully within i_size. Also respect fadvise()/madvise() hints; - "advise: Only allocate huge pages if requested with fadvise()/madvise(); Default is "never" for now. "mount -o remount,huge= /mountpoint" works fine after mount: remounting huge=never will not attempt to break up huge pages at all, just stop more from being allocated. No new config option: put this under CONFIG_TRANSPARENT_HUGEPAGE, which is the appropriate option to protect those who don't want the new bloat, and with which we shall share some pmd code. Prohibit the option when !CONFIG_TRANSPARENT_HUGEPAGE, just as mpol is invalid without CONFIG_NUMA (was hidden in mpol_parse_str(): make it explicit). Allow enabling THP only if the machine has_transparent_hugepage(). But what about Shmem with no user-visible mount? SysV SHM, memfds, shared anonymous mmaps (of /dev/zero or MAP_ANONYMOUS), GPU drivers' DRM objects, Ashmem. Though unlikely to suit all usages, provide sysfs knob /sys/kernel/mm/transparent_hugepage/shmem_enabled to experiment with huge on those. And allow shmem_enabled two further values: - "deny": For use in emergencies, to force the huge option off from all mounts; - "force": Force the huge option on for all - very useful for testing; Based on patch by Hugh Dickins. Link: http://lkml.kernel.org/r/1466021202-61880-28-git-send-email-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 05:26:13 +07:00
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
if (has_transparent_hugepage() && shmem_huge > SHMEM_HUGE_DENY)
shmem: prepare huge= mount option and sysfs knob This patch adds new mount option "huge=". It can have following values: - "always": Attempt to allocate huge pages every time we need a new page; - "never": Do not allocate huge pages; - "within_size": Only allocate huge page if it will be fully within i_size. Also respect fadvise()/madvise() hints; - "advise: Only allocate huge pages if requested with fadvise()/madvise(); Default is "never" for now. "mount -o remount,huge= /mountpoint" works fine after mount: remounting huge=never will not attempt to break up huge pages at all, just stop more from being allocated. No new config option: put this under CONFIG_TRANSPARENT_HUGEPAGE, which is the appropriate option to protect those who don't want the new bloat, and with which we shall share some pmd code. Prohibit the option when !CONFIG_TRANSPARENT_HUGEPAGE, just as mpol is invalid without CONFIG_NUMA (was hidden in mpol_parse_str(): make it explicit). Allow enabling THP only if the machine has_transparent_hugepage(). But what about Shmem with no user-visible mount? SysV SHM, memfds, shared anonymous mmaps (of /dev/zero or MAP_ANONYMOUS), GPU drivers' DRM objects, Ashmem. Though unlikely to suit all usages, provide sysfs knob /sys/kernel/mm/transparent_hugepage/shmem_enabled to experiment with huge on those. And allow shmem_enabled two further values: - "deny": For use in emergencies, to force the huge option off from all mounts; - "force": Force the huge option on for all - very useful for testing; Based on patch by Hugh Dickins. Link: http://lkml.kernel.org/r/1466021202-61880-28-git-send-email-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 05:26:13 +07:00
SHMEM_SB(shm_mnt->mnt_sb)->huge = shmem_huge;
else
shmem_huge = 0; /* just in case it was patched */
#endif
return 0;
out1:
unregister_filesystem(&shmem_fs_type);
out2:
shmem_destroy_inodecache();
shm_mnt = ERR_PTR(error);
return error;
}
#if defined(CONFIG_TRANSPARENT_HUGEPAGE) && defined(CONFIG_SYSFS)
shmem: prepare huge= mount option and sysfs knob This patch adds new mount option "huge=". It can have following values: - "always": Attempt to allocate huge pages every time we need a new page; - "never": Do not allocate huge pages; - "within_size": Only allocate huge page if it will be fully within i_size. Also respect fadvise()/madvise() hints; - "advise: Only allocate huge pages if requested with fadvise()/madvise(); Default is "never" for now. "mount -o remount,huge= /mountpoint" works fine after mount: remounting huge=never will not attempt to break up huge pages at all, just stop more from being allocated. No new config option: put this under CONFIG_TRANSPARENT_HUGEPAGE, which is the appropriate option to protect those who don't want the new bloat, and with which we shall share some pmd code. Prohibit the option when !CONFIG_TRANSPARENT_HUGEPAGE, just as mpol is invalid without CONFIG_NUMA (was hidden in mpol_parse_str(): make it explicit). Allow enabling THP only if the machine has_transparent_hugepage(). But what about Shmem with no user-visible mount? SysV SHM, memfds, shared anonymous mmaps (of /dev/zero or MAP_ANONYMOUS), GPU drivers' DRM objects, Ashmem. Though unlikely to suit all usages, provide sysfs knob /sys/kernel/mm/transparent_hugepage/shmem_enabled to experiment with huge on those. And allow shmem_enabled two further values: - "deny": For use in emergencies, to force the huge option off from all mounts; - "force": Force the huge option on for all - very useful for testing; Based on patch by Hugh Dickins. Link: http://lkml.kernel.org/r/1466021202-61880-28-git-send-email-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 05:26:13 +07:00
static ssize_t shmem_enabled_show(struct kobject *kobj,
struct kobj_attribute *attr, char *buf)
{
static const int values[] = {
shmem: prepare huge= mount option and sysfs knob This patch adds new mount option "huge=". It can have following values: - "always": Attempt to allocate huge pages every time we need a new page; - "never": Do not allocate huge pages; - "within_size": Only allocate huge page if it will be fully within i_size. Also respect fadvise()/madvise() hints; - "advise: Only allocate huge pages if requested with fadvise()/madvise(); Default is "never" for now. "mount -o remount,huge= /mountpoint" works fine after mount: remounting huge=never will not attempt to break up huge pages at all, just stop more from being allocated. No new config option: put this under CONFIG_TRANSPARENT_HUGEPAGE, which is the appropriate option to protect those who don't want the new bloat, and with which we shall share some pmd code. Prohibit the option when !CONFIG_TRANSPARENT_HUGEPAGE, just as mpol is invalid without CONFIG_NUMA (was hidden in mpol_parse_str(): make it explicit). Allow enabling THP only if the machine has_transparent_hugepage(). But what about Shmem with no user-visible mount? SysV SHM, memfds, shared anonymous mmaps (of /dev/zero or MAP_ANONYMOUS), GPU drivers' DRM objects, Ashmem. Though unlikely to suit all usages, provide sysfs knob /sys/kernel/mm/transparent_hugepage/shmem_enabled to experiment with huge on those. And allow shmem_enabled two further values: - "deny": For use in emergencies, to force the huge option off from all mounts; - "force": Force the huge option on for all - very useful for testing; Based on patch by Hugh Dickins. Link: http://lkml.kernel.org/r/1466021202-61880-28-git-send-email-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 05:26:13 +07:00
SHMEM_HUGE_ALWAYS,
SHMEM_HUGE_WITHIN_SIZE,
SHMEM_HUGE_ADVISE,
SHMEM_HUGE_NEVER,
SHMEM_HUGE_DENY,
SHMEM_HUGE_FORCE,
};
int i, count;
for (i = 0, count = 0; i < ARRAY_SIZE(values); i++) {
const char *fmt = shmem_huge == values[i] ? "[%s] " : "%s ";
count += sprintf(buf + count, fmt,
shmem_format_huge(values[i]));
}
buf[count - 1] = '\n';
return count;
}
static ssize_t shmem_enabled_store(struct kobject *kobj,
struct kobj_attribute *attr, const char *buf, size_t count)
{
char tmp[16];
int huge;
if (count + 1 > sizeof(tmp))
return -EINVAL;
memcpy(tmp, buf, count);
tmp[count] = '\0';
if (count && tmp[count - 1] == '\n')
tmp[count - 1] = '\0';
huge = shmem_parse_huge(tmp);
if (huge == -EINVAL)
return -EINVAL;
if (!has_transparent_hugepage() &&
huge != SHMEM_HUGE_NEVER && huge != SHMEM_HUGE_DENY)
return -EINVAL;
shmem_huge = huge;
if (shmem_huge > SHMEM_HUGE_DENY)
shmem: prepare huge= mount option and sysfs knob This patch adds new mount option "huge=". It can have following values: - "always": Attempt to allocate huge pages every time we need a new page; - "never": Do not allocate huge pages; - "within_size": Only allocate huge page if it will be fully within i_size. Also respect fadvise()/madvise() hints; - "advise: Only allocate huge pages if requested with fadvise()/madvise(); Default is "never" for now. "mount -o remount,huge= /mountpoint" works fine after mount: remounting huge=never will not attempt to break up huge pages at all, just stop more from being allocated. No new config option: put this under CONFIG_TRANSPARENT_HUGEPAGE, which is the appropriate option to protect those who don't want the new bloat, and with which we shall share some pmd code. Prohibit the option when !CONFIG_TRANSPARENT_HUGEPAGE, just as mpol is invalid without CONFIG_NUMA (was hidden in mpol_parse_str(): make it explicit). Allow enabling THP only if the machine has_transparent_hugepage(). But what about Shmem with no user-visible mount? SysV SHM, memfds, shared anonymous mmaps (of /dev/zero or MAP_ANONYMOUS), GPU drivers' DRM objects, Ashmem. Though unlikely to suit all usages, provide sysfs knob /sys/kernel/mm/transparent_hugepage/shmem_enabled to experiment with huge on those. And allow shmem_enabled two further values: - "deny": For use in emergencies, to force the huge option off from all mounts; - "force": Force the huge option on for all - very useful for testing; Based on patch by Hugh Dickins. Link: http://lkml.kernel.org/r/1466021202-61880-28-git-send-email-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 05:26:13 +07:00
SHMEM_SB(shm_mnt->mnt_sb)->huge = shmem_huge;
return count;
}
struct kobj_attribute shmem_enabled_attr =
__ATTR(shmem_enabled, 0644, shmem_enabled_show, shmem_enabled_store);
#endif /* CONFIG_TRANSPARENT_HUGEPAGE && CONFIG_SYSFS */
khugepaged: add support of collapse for tmpfs/shmem pages This patch extends khugepaged to support collapse of tmpfs/shmem pages. We share fair amount of infrastructure with anon-THP collapse. Few design points: - First we are looking for VMA which can be suitable for mapping huge page; - If the VMA maps shmem file, the rest scan/collapse operations operates on page cache, not on page tables as in anon VMA case. - khugepaged_scan_shmem() finds a range which is suitable for huge page. The scan is lockless and shouldn't disturb system too much. - once the candidate for collapse is found, collapse_shmem() attempts to create a huge page: + scan over radix tree, making the range point to new huge page; + new huge page is not-uptodate, locked and freezed (refcount is 0), so nobody can touch them until we say so. + we swap in pages during the scan. khugepaged_scan_shmem() filters out ranges with more than khugepaged_max_ptes_swap swapped out pages. It's HPAGE_PMD_NR/8 by default. + old pages are isolated, unmapped and put to local list in case to be restored back if collapse failed. - if collapse succeed, we retract pte page tables from VMAs where huge pages mapping is possible. The huge page will be mapped as PMD on next minor fault into the range. Link: http://lkml.kernel.org/r/1466021202-61880-35-git-send-email-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 05:26:32 +07:00
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
khugepaged: add support of collapse for tmpfs/shmem pages This patch extends khugepaged to support collapse of tmpfs/shmem pages. We share fair amount of infrastructure with anon-THP collapse. Few design points: - First we are looking for VMA which can be suitable for mapping huge page; - If the VMA maps shmem file, the rest scan/collapse operations operates on page cache, not on page tables as in anon VMA case. - khugepaged_scan_shmem() finds a range which is suitable for huge page. The scan is lockless and shouldn't disturb system too much. - once the candidate for collapse is found, collapse_shmem() attempts to create a huge page: + scan over radix tree, making the range point to new huge page; + new huge page is not-uptodate, locked and freezed (refcount is 0), so nobody can touch them until we say so. + we swap in pages during the scan. khugepaged_scan_shmem() filters out ranges with more than khugepaged_max_ptes_swap swapped out pages. It's HPAGE_PMD_NR/8 by default. + old pages are isolated, unmapped and put to local list in case to be restored back if collapse failed. - if collapse succeed, we retract pte page tables from VMAs where huge pages mapping is possible. The huge page will be mapped as PMD on next minor fault into the range. Link: http://lkml.kernel.org/r/1466021202-61880-35-git-send-email-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 05:26:32 +07:00
bool shmem_huge_enabled(struct vm_area_struct *vma)
{
struct inode *inode = file_inode(vma->vm_file);
struct shmem_sb_info *sbinfo = SHMEM_SB(inode->i_sb);
loff_t i_size;
pgoff_t off;
mm: thp: fix false negative of shmem vma's THP eligibility Commit 7635d9cbe832 ("mm, thp, proc: report THP eligibility for each vma") introduced THPeligible bit for processes' smaps. But, when checking the eligibility for shmem vma, __transparent_hugepage_enabled() is called to override the result from shmem_huge_enabled(). It may result in the anonymous vma's THP flag override shmem's. For example, running a simple test which create THP for shmem, but with anonymous THP disabled, when reading the process's smaps, it may show: 7fc92ec00000-7fc92f000000 rw-s 00000000 00:14 27764 /dev/shm/test Size: 4096 kB ... [snip] ... ShmemPmdMapped: 4096 kB ... [snip] ... THPeligible: 0 And, /proc/meminfo does show THP allocated and PMD mapped too: ShmemHugePages: 4096 kB ShmemPmdMapped: 4096 kB This doesn't make too much sense. The shmem objects should be treated separately from anonymous THP. Calling shmem_huge_enabled() with checking MMF_DISABLE_THP sounds good enough. And, we could skip stack and dax vma check since we already checked if the vma is shmem already. Also check if vma is suitable for THP by calling transhuge_vma_suitable(). And minor fix to smaps output format and documentation. Link: http://lkml.kernel.org/r/1560401041-32207-3-git-send-email-yang.shi@linux.alibaba.com Fixes: 7635d9cbe832 ("mm, thp, proc: report THP eligibility for each vma") Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-19 05:57:27 +07:00
if ((vma->vm_flags & VM_NOHUGEPAGE) ||
test_bit(MMF_DISABLE_THP, &vma->vm_mm->flags))
return false;
khugepaged: add support of collapse for tmpfs/shmem pages This patch extends khugepaged to support collapse of tmpfs/shmem pages. We share fair amount of infrastructure with anon-THP collapse. Few design points: - First we are looking for VMA which can be suitable for mapping huge page; - If the VMA maps shmem file, the rest scan/collapse operations operates on page cache, not on page tables as in anon VMA case. - khugepaged_scan_shmem() finds a range which is suitable for huge page. The scan is lockless and shouldn't disturb system too much. - once the candidate for collapse is found, collapse_shmem() attempts to create a huge page: + scan over radix tree, making the range point to new huge page; + new huge page is not-uptodate, locked and freezed (refcount is 0), so nobody can touch them until we say so. + we swap in pages during the scan. khugepaged_scan_shmem() filters out ranges with more than khugepaged_max_ptes_swap swapped out pages. It's HPAGE_PMD_NR/8 by default. + old pages are isolated, unmapped and put to local list in case to be restored back if collapse failed. - if collapse succeed, we retract pte page tables from VMAs where huge pages mapping is possible. The huge page will be mapped as PMD on next minor fault into the range. Link: http://lkml.kernel.org/r/1466021202-61880-35-git-send-email-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 05:26:32 +07:00
if (shmem_huge == SHMEM_HUGE_FORCE)
return true;
if (shmem_huge == SHMEM_HUGE_DENY)
return false;
switch (sbinfo->huge) {
case SHMEM_HUGE_NEVER:
return false;
case SHMEM_HUGE_ALWAYS:
return true;
case SHMEM_HUGE_WITHIN_SIZE:
off = round_up(vma->vm_pgoff, HPAGE_PMD_NR);
i_size = round_up(i_size_read(inode), PAGE_SIZE);
if (i_size >= HPAGE_PMD_SIZE &&
i_size >> PAGE_SHIFT >= off)
return true;
fallthrough;
khugepaged: add support of collapse for tmpfs/shmem pages This patch extends khugepaged to support collapse of tmpfs/shmem pages. We share fair amount of infrastructure with anon-THP collapse. Few design points: - First we are looking for VMA which can be suitable for mapping huge page; - If the VMA maps shmem file, the rest scan/collapse operations operates on page cache, not on page tables as in anon VMA case. - khugepaged_scan_shmem() finds a range which is suitable for huge page. The scan is lockless and shouldn't disturb system too much. - once the candidate for collapse is found, collapse_shmem() attempts to create a huge page: + scan over radix tree, making the range point to new huge page; + new huge page is not-uptodate, locked and freezed (refcount is 0), so nobody can touch them until we say so. + we swap in pages during the scan. khugepaged_scan_shmem() filters out ranges with more than khugepaged_max_ptes_swap swapped out pages. It's HPAGE_PMD_NR/8 by default. + old pages are isolated, unmapped and put to local list in case to be restored back if collapse failed. - if collapse succeed, we retract pte page tables from VMAs where huge pages mapping is possible. The huge page will be mapped as PMD on next minor fault into the range. Link: http://lkml.kernel.org/r/1466021202-61880-35-git-send-email-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 05:26:32 +07:00
case SHMEM_HUGE_ADVISE:
/* TODO: implement fadvise() hints */
return (vma->vm_flags & VM_HUGEPAGE);
default:
VM_BUG_ON(1);
return false;
}
}
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
shmem: prepare huge= mount option and sysfs knob This patch adds new mount option "huge=". It can have following values: - "always": Attempt to allocate huge pages every time we need a new page; - "never": Do not allocate huge pages; - "within_size": Only allocate huge page if it will be fully within i_size. Also respect fadvise()/madvise() hints; - "advise: Only allocate huge pages if requested with fadvise()/madvise(); Default is "never" for now. "mount -o remount,huge= /mountpoint" works fine after mount: remounting huge=never will not attempt to break up huge pages at all, just stop more from being allocated. No new config option: put this under CONFIG_TRANSPARENT_HUGEPAGE, which is the appropriate option to protect those who don't want the new bloat, and with which we shall share some pmd code. Prohibit the option when !CONFIG_TRANSPARENT_HUGEPAGE, just as mpol is invalid without CONFIG_NUMA (was hidden in mpol_parse_str(): make it explicit). Allow enabling THP only if the machine has_transparent_hugepage(). But what about Shmem with no user-visible mount? SysV SHM, memfds, shared anonymous mmaps (of /dev/zero or MAP_ANONYMOUS), GPU drivers' DRM objects, Ashmem. Though unlikely to suit all usages, provide sysfs knob /sys/kernel/mm/transparent_hugepage/shmem_enabled to experiment with huge on those. And allow shmem_enabled two further values: - "deny": For use in emergencies, to force the huge option off from all mounts; - "force": Force the huge option on for all - very useful for testing; Based on patch by Hugh Dickins. Link: http://lkml.kernel.org/r/1466021202-61880-28-git-send-email-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 05:26:13 +07:00
#else /* !CONFIG_SHMEM */
/*
* tiny-shmem: simple shmemfs and tmpfs using ramfs code
*
* This is intended for small system where the benefits of the full
* shmem code (swap-backed and resource-limited) are outweighed by
* their complexity. On systems without swap this code should be
* effectively equivalent, but much lighter weight.
*/
static struct file_system_type shmem_fs_type = {
.name = "tmpfs",
.init_fs_context = ramfs_init_fs_context,
.parameters = ramfs_fs_parameters,
.kill_sb = kill_litter_super,
.fs_flags = FS_USERNS_MOUNT,
};
int __init shmem_init(void)
{
BUG_ON(register_filesystem(&shmem_fs_type) != 0);
shm_mnt = kern_mount(&shmem_fs_type);
BUG_ON(IS_ERR(shm_mnt));
return 0;
}
mm: rid swapoff of quadratic complexity This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-06 06:47:03 +07:00
int shmem_unuse(unsigned int type, bool frontswap,
unsigned long *fs_pages_to_unuse)
{
return 0;
}
int shmem_lock(struct file *file, int lock, struct user_struct *user)
{
return 0;
}
SHM_UNLOCK: fix Unevictable pages stranded after swap Commit cc39c6a9bbde ("mm: account skipped entries to avoid looping in find_get_pages") correctly fixed an infinite loop; but left a problem that find_get_pages() on shmem would return 0 (appearing to callers to mean end of tree) when it meets a run of nr_pages swap entries. The only uses of find_get_pages() on shmem are via pagevec_lookup(), called from invalidate_mapping_pages(), and from shmctl SHM_UNLOCK's scan_mapping_unevictable_pages(). The first is already commented, and not worth worrying about; but the second can leave pages on the Unevictable list after an unusual sequence of swapping and locking. Fix that by using shmem_find_get_pages_and_swap() (then ignoring the swap) instead of pagevec_lookup(). But I don't want to contaminate vmscan.c with shmem internals, nor shmem.c with LRU locking. So move scan_mapping_unevictable_pages() into shmem.c, renaming it shmem_unlock_mapping(); and rename check_move_unevictable_page() to check_move_unevictable_pages(), looping down an array of pages, oftentimes under the same lock. Leave out the "rotate unevictable list" block: that's a leftover from when this was used for /proc/sys/vm/scan_unevictable_pages, whose flawed handling involved looking at pages at tail of LRU. Was there significance to the sequence first ClearPageUnevictable, then test page_evictable, then SetPageUnevictable here? I think not, we're under LRU lock, and have no barriers between those. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michel Lespinasse <walken@google.com> Cc: <stable@vger.kernel.org> [back to 3.1 but will need respins] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-21 05:34:21 +07:00
void shmem_unlock_mapping(struct address_space *mapping)
{
}
#ifdef CONFIG_MMU
unsigned long shmem_get_unmapped_area(struct file *file,
unsigned long addr, unsigned long len,
unsigned long pgoff, unsigned long flags)
{
return current->mm->get_unmapped_area(file, addr, len, pgoff, flags);
}
#endif
void shmem_truncate_range(struct inode *inode, loff_t lstart, loff_t lend)
tmpfs: take control of its truncate_range 2.6.35's new truncate convention gave tmpfs the opportunity to control its file truncation, no longer enforced from outside by vmtruncate(). We shall want to build upon that, to handle pagecache and swap together. Slightly redefine the ->truncate_range interface: let it now be called between the unmap_mapping_range()s, with the filesystem responsible for doing the truncate_inode_pages_range() from it - just as the filesystem is nowadays responsible for doing that from its ->setattr. Let's rename shmem_notify_change() to shmem_setattr(). Instead of calling the generic truncate_setsize(), bring that code in so we can call shmem_truncate_range() - which will later be updated to perform its own variant of truncate_inode_pages_range(). Remove the punch_hole unmap_mapping_range() from shmem_truncate_range(): now that the COW's unmap_mapping_range() comes after ->truncate_range, there is no need to call it a third time. Export shmem_truncate_range() and add it to the list in shmem_fs.h, so that i915_gem_object_truncate() can call it explicitly in future; get this patch in first, then update drm/i915 once this is available (until then, i915 will just be doing the truncate_inode_pages() twice). Though introduced five years ago, no other filesystem is implementing ->truncate_range, and its only other user is madvise(,,MADV_REMOVE): we expect to convert it to fallocate(,FALLOC_FL_PUNCH_HOLE,,) shortly, whereupon ->truncate_range can be removed from inode_operations - shmem_truncate_range() will help i915 across that transition too. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-28 06:18:03 +07:00
{
truncate_inode_pages_range(inode->i_mapping, lstart, lend);
tmpfs: take control of its truncate_range 2.6.35's new truncate convention gave tmpfs the opportunity to control its file truncation, no longer enforced from outside by vmtruncate(). We shall want to build upon that, to handle pagecache and swap together. Slightly redefine the ->truncate_range interface: let it now be called between the unmap_mapping_range()s, with the filesystem responsible for doing the truncate_inode_pages_range() from it - just as the filesystem is nowadays responsible for doing that from its ->setattr. Let's rename shmem_notify_change() to shmem_setattr(). Instead of calling the generic truncate_setsize(), bring that code in so we can call shmem_truncate_range() - which will later be updated to perform its own variant of truncate_inode_pages_range(). Remove the punch_hole unmap_mapping_range() from shmem_truncate_range(): now that the COW's unmap_mapping_range() comes after ->truncate_range, there is no need to call it a third time. Export shmem_truncate_range() and add it to the list in shmem_fs.h, so that i915_gem_object_truncate() can call it explicitly in future; get this patch in first, then update drm/i915 once this is available (until then, i915 will just be doing the truncate_inode_pages() twice). Though introduced five years ago, no other filesystem is implementing ->truncate_range, and its only other user is madvise(,,MADV_REMOVE): we expect to convert it to fallocate(,FALLOC_FL_PUNCH_HOLE,,) shortly, whereupon ->truncate_range can be removed from inode_operations - shmem_truncate_range() will help i915 across that transition too. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-28 06:18:03 +07:00
}
EXPORT_SYMBOL_GPL(shmem_truncate_range);
#define shmem_vm_ops generic_file_vm_ops
#define shmem_file_operations ramfs_file_operations
#define shmem_get_inode(sb, dir, mode, dev, flags) ramfs_get_inode(sb, dir, mode, dev)
#define shmem_acct_size(flags, size) 0
#define shmem_unacct_size(flags, size) do {} while (0)
#endif /* CONFIG_SHMEM */
/* common code */
static struct file *__shmem_file_setup(struct vfsmount *mnt, const char *name, loff_t size,
security: shmem: implement kernel private shmem inodes We have a problem where the big_key key storage implementation uses a shmem backed inode to hold the key contents. Because of this detail of implementation LSM checks are being done between processes trying to read the keys and the tmpfs backed inode. The LSM checks are already being handled on the key interface level and should not be enforced at the inode level (since the inode is an implementation detail, not a part of the security model) This patch implements a new function shmem_kernel_file_setup() which returns the equivalent to shmem_file_setup() only the underlying inode has S_PRIVATE set. This means that all LSM checks for the inode in question are skipped. It should only be used for kernel internal operations where the inode is not exposed to userspace without proper LSM checking. It is possible that some other users of shmem_file_setup() should use the new interface, but this has not been explored. Reproducing this bug is a little bit difficult. The steps I used on Fedora are: (1) Turn off selinux enforcing: setenforce 0 (2) Create a huge key k=`dd if=/dev/zero bs=8192 count=1 | keyctl padd big_key test-key @s` (3) Access the key in another context: runcon system_u:system_r:httpd_t:s0-s0:c0.c1023 keyctl print $k >/dev/null (4) Examine the audit logs: ausearch -m AVC -i --subject httpd_t | audit2allow If the last command's output includes a line that looks like: allow httpd_t user_tmpfs_t:file { open read }; There was an inode check between httpd and the tmpfs filesystem. With this patch no such denial will be seen. (NOTE! you should clear your audit log if you have tested for this previously) (Please return you box to enforcing) Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Hugh Dickins <hughd@google.com> cc: linux-mm@kvack.org
2013-12-02 18:24:19 +07:00
unsigned long flags, unsigned int i_flags)
{
struct inode *inode;
struct file *res;
if (IS_ERR(mnt))
return ERR_CAST(mnt);
tmpfs: demolish old swap vector support The maximum size of a shmem/tmpfs file has been limited by the maximum size of its triple-indirect swap vector. With 4kB page size, maximum filesize was just over 2TB on a 32-bit kernel, but sadly one eighth of that on a 64-bit kernel. (With 8kB page size, maximum filesize was just over 4TB on a 64-bit kernel, but 16TB on a 32-bit kernel, MAX_LFS_FILESIZE being then more restrictive than swap vector layout.) It's a shame that tmpfs should be more restrictive than ramfs, and this limitation has now been noticed. Add another level to the swap vector? No, it became obscure and hard to maintain, once I complicated it to make use of highmem pages nine years ago: better choose another way. Surely, if 2.4 had had the radix tree pagecache introduced in 2.5, then tmpfs would never have invented its own peculiar radix tree: we would have fitted swap entries into the common radix tree instead, in much the same way as we fit swap entries into page tables. And why should each file have a separate radix tree for its pages and for its swap entries? The swap entries are required precisely where and when the pages are not. We want to put them together in a single radix tree: which can then avoid much of the locking which was needed to prevent them from being exchanged underneath us. This also avoids the waste of memory devoted to swap vectors, first in the shmem_inode itself, then at least two more pages once a file grew beyond 16 data pages (pages accounted by df and du, but not by memcg). Allocated upfront, to avoid allocation when under swapping pressure, but pure waste when CONFIG_SWAP is not set - I have never spattered around the ifdefs to prevent that, preferring this move to sharing the common radix tree instead. There are three downsides to sharing the radix tree. One, that it binds tmpfs more tightly to the rest of mm, either requiring knowledge of swap entries in radix tree there, or duplication of its code here in shmem.c. I believe that the simplications and memory savings (and probable higher performance, not yet measured) justify that. Two, that on HIGHMEM systems with SWAP enabled, it's the lowmem radix nodes that cannot be freed under memory pressure - whereas before it was the less precious highmem swap vector pages that could not be freed. I'm hoping that 64-bit has now been accessible for long enough, that the highmem argument has grown much less persuasive. Three, that swapoff is slower than it used to be on tmpfs files, since it's using a simple generic mechanism not tailored to it: I find this noticeable, and shall want to improve, but maybe nobody else will notice. So... now remove most of the old swap vector code from shmem.c. But, for the moment, keep the simple i_direct vector of 16 pages, with simple accessors shmem_put_swap() and shmem_get_swap(), as a toy implementation to help mark where swap needs to be handled in subsequent patches. Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-04 06:21:20 +07:00
if (size < 0 || size > MAX_LFS_FILESIZE)
return ERR_PTR(-EINVAL);
if (shmem_acct_size(flags, size))
return ERR_PTR(-ENOMEM);
inode = shmem_get_inode(mnt->mnt_sb, NULL, S_IFREG | S_IRWXUGO, 0,
flags);
if (unlikely(!inode)) {
shmem_unacct_size(flags, size);
return ERR_PTR(-ENOSPC);
}
security: shmem: implement kernel private shmem inodes We have a problem where the big_key key storage implementation uses a shmem backed inode to hold the key contents. Because of this detail of implementation LSM checks are being done between processes trying to read the keys and the tmpfs backed inode. The LSM checks are already being handled on the key interface level and should not be enforced at the inode level (since the inode is an implementation detail, not a part of the security model) This patch implements a new function shmem_kernel_file_setup() which returns the equivalent to shmem_file_setup() only the underlying inode has S_PRIVATE set. This means that all LSM checks for the inode in question are skipped. It should only be used for kernel internal operations where the inode is not exposed to userspace without proper LSM checking. It is possible that some other users of shmem_file_setup() should use the new interface, but this has not been explored. Reproducing this bug is a little bit difficult. The steps I used on Fedora are: (1) Turn off selinux enforcing: setenforce 0 (2) Create a huge key k=`dd if=/dev/zero bs=8192 count=1 | keyctl padd big_key test-key @s` (3) Access the key in another context: runcon system_u:system_r:httpd_t:s0-s0:c0.c1023 keyctl print $k >/dev/null (4) Examine the audit logs: ausearch -m AVC -i --subject httpd_t | audit2allow If the last command's output includes a line that looks like: allow httpd_t user_tmpfs_t:file { open read }; There was an inode check between httpd and the tmpfs filesystem. With this patch no such denial will be seen. (NOTE! you should clear your audit log if you have tested for this previously) (Please return you box to enforcing) Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Hugh Dickins <hughd@google.com> cc: linux-mm@kvack.org
2013-12-02 18:24:19 +07:00
inode->i_flags |= i_flags;
inode->i_size = size;
clear_nlink(inode); /* It is unlinked */
res = ERR_PTR(ramfs_nommu_expand_for_mapping(inode, size));
if (!IS_ERR(res))
res = alloc_file_pseudo(inode, mnt, name, O_RDWR,
&shmem_file_operations);
if (IS_ERR(res))
iput(inode);
return res;
}
security: shmem: implement kernel private shmem inodes We have a problem where the big_key key storage implementation uses a shmem backed inode to hold the key contents. Because of this detail of implementation LSM checks are being done between processes trying to read the keys and the tmpfs backed inode. The LSM checks are already being handled on the key interface level and should not be enforced at the inode level (since the inode is an implementation detail, not a part of the security model) This patch implements a new function shmem_kernel_file_setup() which returns the equivalent to shmem_file_setup() only the underlying inode has S_PRIVATE set. This means that all LSM checks for the inode in question are skipped. It should only be used for kernel internal operations where the inode is not exposed to userspace without proper LSM checking. It is possible that some other users of shmem_file_setup() should use the new interface, but this has not been explored. Reproducing this bug is a little bit difficult. The steps I used on Fedora are: (1) Turn off selinux enforcing: setenforce 0 (2) Create a huge key k=`dd if=/dev/zero bs=8192 count=1 | keyctl padd big_key test-key @s` (3) Access the key in another context: runcon system_u:system_r:httpd_t:s0-s0:c0.c1023 keyctl print $k >/dev/null (4) Examine the audit logs: ausearch -m AVC -i --subject httpd_t | audit2allow If the last command's output includes a line that looks like: allow httpd_t user_tmpfs_t:file { open read }; There was an inode check between httpd and the tmpfs filesystem. With this patch no such denial will be seen. (NOTE! you should clear your audit log if you have tested for this previously) (Please return you box to enforcing) Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Hugh Dickins <hughd@google.com> cc: linux-mm@kvack.org
2013-12-02 18:24:19 +07:00
/**
* shmem_kernel_file_setup - get an unlinked file living in tmpfs which must be
* kernel internal. There will be NO LSM permission checks against the
* underlying inode. So users of this interface must do LSM checks at a
ipc: use private shmem or hugetlbfs inodes for shm segments. The shm implementation internally uses shmem or hugetlbfs inodes for shm segments. As these inodes are never directly exposed to userspace and only accessed through the shm operations which are already hooked by security modules, mark the inodes with the S_PRIVATE flag so that inode security initialization and permission checking is skipped. This was motivated by the following lockdep warning: ====================================================== [ INFO: possible circular locking dependency detected ] 4.2.0-0.rc3.git0.1.fc24.x86_64+debug #1 Tainted: G W ------------------------------------------------------- httpd/1597 is trying to acquire lock: (&ids->rwsem){+++++.}, at: shm_close+0x34/0x130 but task is already holding lock: (&mm->mmap_sem){++++++}, at: SyS_shmdt+0x4b/0x180 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&mm->mmap_sem){++++++}: lock_acquire+0xc7/0x270 __might_fault+0x7a/0xa0 filldir+0x9e/0x130 xfs_dir2_block_getdents.isra.12+0x198/0x1c0 [xfs] xfs_readdir+0x1b4/0x330 [xfs] xfs_file_readdir+0x2b/0x30 [xfs] iterate_dir+0x97/0x130 SyS_getdents+0x91/0x120 entry_SYSCALL_64_fastpath+0x12/0x76 -> #2 (&xfs_dir_ilock_class){++++.+}: lock_acquire+0xc7/0x270 down_read_nested+0x57/0xa0 xfs_ilock+0x167/0x350 [xfs] xfs_ilock_attr_map_shared+0x38/0x50 [xfs] xfs_attr_get+0xbd/0x190 [xfs] xfs_xattr_get+0x3d/0x70 [xfs] generic_getxattr+0x4f/0x70 inode_doinit_with_dentry+0x162/0x670 sb_finish_set_opts+0xd9/0x230 selinux_set_mnt_opts+0x35c/0x660 superblock_doinit+0x77/0xf0 delayed_superblock_init+0x10/0x20 iterate_supers+0xb3/0x110 selinux_complete_init+0x2f/0x40 security_load_policy+0x103/0x600 sel_write_load+0xc1/0x750 __vfs_write+0x37/0x100 vfs_write+0xa9/0x1a0 SyS_write+0x58/0xd0 entry_SYSCALL_64_fastpath+0x12/0x76 ... Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Reported-by: Morten Stevens <mstevens@fedoraproject.org> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Paul Moore <paul@paul-moore.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Eric Paris <eparis@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-08-07 05:46:55 +07:00
* higher layer. The users are the big_key and shm implementations. LSM
* checks are provided at the key or shm level rather than the inode.
security: shmem: implement kernel private shmem inodes We have a problem where the big_key key storage implementation uses a shmem backed inode to hold the key contents. Because of this detail of implementation LSM checks are being done between processes trying to read the keys and the tmpfs backed inode. The LSM checks are already being handled on the key interface level and should not be enforced at the inode level (since the inode is an implementation detail, not a part of the security model) This patch implements a new function shmem_kernel_file_setup() which returns the equivalent to shmem_file_setup() only the underlying inode has S_PRIVATE set. This means that all LSM checks for the inode in question are skipped. It should only be used for kernel internal operations where the inode is not exposed to userspace without proper LSM checking. It is possible that some other users of shmem_file_setup() should use the new interface, but this has not been explored. Reproducing this bug is a little bit difficult. The steps I used on Fedora are: (1) Turn off selinux enforcing: setenforce 0 (2) Create a huge key k=`dd if=/dev/zero bs=8192 count=1 | keyctl padd big_key test-key @s` (3) Access the key in another context: runcon system_u:system_r:httpd_t:s0-s0:c0.c1023 keyctl print $k >/dev/null (4) Examine the audit logs: ausearch -m AVC -i --subject httpd_t | audit2allow If the last command's output includes a line that looks like: allow httpd_t user_tmpfs_t:file { open read }; There was an inode check between httpd and the tmpfs filesystem. With this patch no such denial will be seen. (NOTE! you should clear your audit log if you have tested for this previously) (Please return you box to enforcing) Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Hugh Dickins <hughd@google.com> cc: linux-mm@kvack.org
2013-12-02 18:24:19 +07:00
* @name: name for dentry (to be seen in /proc/<pid>/maps
* @size: size to be set for the file
* @flags: VM_NORESERVE suppresses pre-accounting of the entire object size
*/
struct file *shmem_kernel_file_setup(const char *name, loff_t size, unsigned long flags)
{
return __shmem_file_setup(shm_mnt, name, size, flags, S_PRIVATE);
security: shmem: implement kernel private shmem inodes We have a problem where the big_key key storage implementation uses a shmem backed inode to hold the key contents. Because of this detail of implementation LSM checks are being done between processes trying to read the keys and the tmpfs backed inode. The LSM checks are already being handled on the key interface level and should not be enforced at the inode level (since the inode is an implementation detail, not a part of the security model) This patch implements a new function shmem_kernel_file_setup() which returns the equivalent to shmem_file_setup() only the underlying inode has S_PRIVATE set. This means that all LSM checks for the inode in question are skipped. It should only be used for kernel internal operations where the inode is not exposed to userspace without proper LSM checking. It is possible that some other users of shmem_file_setup() should use the new interface, but this has not been explored. Reproducing this bug is a little bit difficult. The steps I used on Fedora are: (1) Turn off selinux enforcing: setenforce 0 (2) Create a huge key k=`dd if=/dev/zero bs=8192 count=1 | keyctl padd big_key test-key @s` (3) Access the key in another context: runcon system_u:system_r:httpd_t:s0-s0:c0.c1023 keyctl print $k >/dev/null (4) Examine the audit logs: ausearch -m AVC -i --subject httpd_t | audit2allow If the last command's output includes a line that looks like: allow httpd_t user_tmpfs_t:file { open read }; There was an inode check between httpd and the tmpfs filesystem. With this patch no such denial will be seen. (NOTE! you should clear your audit log if you have tested for this previously) (Please return you box to enforcing) Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Hugh Dickins <hughd@google.com> cc: linux-mm@kvack.org
2013-12-02 18:24:19 +07:00
}
/**
* shmem_file_setup - get an unlinked file living in tmpfs
* @name: name for dentry (to be seen in /proc/<pid>/maps
* @size: size to be set for the file
* @flags: VM_NORESERVE suppresses pre-accounting of the entire object size
*/
struct file *shmem_file_setup(const char *name, loff_t size, unsigned long flags)
{
return __shmem_file_setup(shm_mnt, name, size, flags, 0);
security: shmem: implement kernel private shmem inodes We have a problem where the big_key key storage implementation uses a shmem backed inode to hold the key contents. Because of this detail of implementation LSM checks are being done between processes trying to read the keys and the tmpfs backed inode. The LSM checks are already being handled on the key interface level and should not be enforced at the inode level (since the inode is an implementation detail, not a part of the security model) This patch implements a new function shmem_kernel_file_setup() which returns the equivalent to shmem_file_setup() only the underlying inode has S_PRIVATE set. This means that all LSM checks for the inode in question are skipped. It should only be used for kernel internal operations where the inode is not exposed to userspace without proper LSM checking. It is possible that some other users of shmem_file_setup() should use the new interface, but this has not been explored. Reproducing this bug is a little bit difficult. The steps I used on Fedora are: (1) Turn off selinux enforcing: setenforce 0 (2) Create a huge key k=`dd if=/dev/zero bs=8192 count=1 | keyctl padd big_key test-key @s` (3) Access the key in another context: runcon system_u:system_r:httpd_t:s0-s0:c0.c1023 keyctl print $k >/dev/null (4) Examine the audit logs: ausearch -m AVC -i --subject httpd_t | audit2allow If the last command's output includes a line that looks like: allow httpd_t user_tmpfs_t:file { open read }; There was an inode check between httpd and the tmpfs filesystem. With this patch no such denial will be seen. (NOTE! you should clear your audit log if you have tested for this previously) (Please return you box to enforcing) Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Hugh Dickins <hughd@google.com> cc: linux-mm@kvack.org
2013-12-02 18:24:19 +07:00
}
EXPORT_SYMBOL_GPL(shmem_file_setup);
/**
* shmem_file_setup_with_mnt - get an unlinked file living in tmpfs
* @mnt: the tmpfs mount where the file will be created
* @name: name for dentry (to be seen in /proc/<pid>/maps
* @size: size to be set for the file
* @flags: VM_NORESERVE suppresses pre-accounting of the entire object size
*/
struct file *shmem_file_setup_with_mnt(struct vfsmount *mnt, const char *name,
loff_t size, unsigned long flags)
{
return __shmem_file_setup(mnt, name, size, flags, 0);
}
EXPORT_SYMBOL_GPL(shmem_file_setup_with_mnt);
/**
* shmem_zero_setup - setup a shared anonymous mapping
* @vma: the vma to be mmapped is prepared by do_mmap
*/
int shmem_zero_setup(struct vm_area_struct *vma)
{
struct file *file;
loff_t size = vma->vm_end - vma->vm_start;
/*
* Cloning a new file under mmap_lock leads to a lock ordering conflict
* between XFS directory reading and selinux: since this file is only
* accessible to the user through its mapping, use S_PRIVATE flag to
* bypass file security, in the same way as shmem_kernel_file_setup().
*/
file = shmem_kernel_file_setup("dev/zero", size, vma->vm_flags);
if (IS_ERR(file))
return PTR_ERR(file);
if (vma->vm_file)
fput(vma->vm_file);
vma->vm_file = file;
vma->vm_ops = &shmem_vm_ops;
khugepaged: add support of collapse for tmpfs/shmem pages This patch extends khugepaged to support collapse of tmpfs/shmem pages. We share fair amount of infrastructure with anon-THP collapse. Few design points: - First we are looking for VMA which can be suitable for mapping huge page; - If the VMA maps shmem file, the rest scan/collapse operations operates on page cache, not on page tables as in anon VMA case. - khugepaged_scan_shmem() finds a range which is suitable for huge page. The scan is lockless and shouldn't disturb system too much. - once the candidate for collapse is found, collapse_shmem() attempts to create a huge page: + scan over radix tree, making the range point to new huge page; + new huge page is not-uptodate, locked and freezed (refcount is 0), so nobody can touch them until we say so. + we swap in pages during the scan. khugepaged_scan_shmem() filters out ranges with more than khugepaged_max_ptes_swap swapped out pages. It's HPAGE_PMD_NR/8 by default. + old pages are isolated, unmapped and put to local list in case to be restored back if collapse failed. - if collapse succeed, we retract pte page tables from VMAs where huge pages mapping is possible. The huge page will be mapped as PMD on next minor fault into the range. Link: http://lkml.kernel.org/r/1466021202-61880-35-git-send-email-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 05:26:32 +07:00
if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE) &&
khugepaged: add support of collapse for tmpfs/shmem pages This patch extends khugepaged to support collapse of tmpfs/shmem pages. We share fair amount of infrastructure with anon-THP collapse. Few design points: - First we are looking for VMA which can be suitable for mapping huge page; - If the VMA maps shmem file, the rest scan/collapse operations operates on page cache, not on page tables as in anon VMA case. - khugepaged_scan_shmem() finds a range which is suitable for huge page. The scan is lockless and shouldn't disturb system too much. - once the candidate for collapse is found, collapse_shmem() attempts to create a huge page: + scan over radix tree, making the range point to new huge page; + new huge page is not-uptodate, locked and freezed (refcount is 0), so nobody can touch them until we say so. + we swap in pages during the scan. khugepaged_scan_shmem() filters out ranges with more than khugepaged_max_ptes_swap swapped out pages. It's HPAGE_PMD_NR/8 by default. + old pages are isolated, unmapped and put to local list in case to be restored back if collapse failed. - if collapse succeed, we retract pte page tables from VMAs where huge pages mapping is possible. The huge page will be mapped as PMD on next minor fault into the range. Link: http://lkml.kernel.org/r/1466021202-61880-35-git-send-email-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 05:26:32 +07:00
((vma->vm_start + ~HPAGE_PMD_MASK) & HPAGE_PMD_MASK) <
(vma->vm_end & HPAGE_PMD_MASK)) {
khugepaged_enter(vma, vma->vm_flags);
}
return 0;
}
/**
* shmem_read_mapping_page_gfp - read into page cache, using specified page allocation flags.
* @mapping: the page's address_space
* @index: the page index
* @gfp: the page allocator flags to use if allocating
*
* This behaves as a tmpfs "read_cache_page_gfp(mapping, index, gfp)",
* with any new page allocations done using the specified allocation flags.
* But read_cache_page_gfp() uses the ->readpage() method: which does not
* suit tmpfs, since it may have pages in swapcache, and needs to find those
* for itself; although drivers/gpu/drm i915 and ttm rely upon this support.
*
* i915_gem_object_get_pages_gtt() mixes __GFP_NORETRY | __GFP_NOWARN in
* with the mapping_gfp_mask(), to avoid OOMing the machine unnecessarily.
*/
struct page *shmem_read_mapping_page_gfp(struct address_space *mapping,
pgoff_t index, gfp_t gfp)
{
#ifdef CONFIG_SHMEM
struct inode *inode = mapping->host;
struct page *page;
int error;
BUG_ON(mapping->a_ops != &shmem_aops);
error = shmem_getpage_gfp(inode, index, &page, SGP_CACHE,
gfp, NULL, NULL, NULL);
if (error)
page = ERR_PTR(error);
else
unlock_page(page);
return page;
#else
/*
* The tiny !SHMEM case uses ramfs without swap
*/
return read_cache_page_gfp(mapping, index, gfp);
#endif
}
EXPORT_SYMBOL_GPL(shmem_read_mapping_page_gfp);