linux_dsm_epyc7002/include/uapi/linux/ipv6.h

178 lines
3.3 KiB
C
Raw Normal View History

#ifndef _UAPI_IPV6_H
#define _UAPI_IPV6_H
#include <linux/libc-compat.h>
#include <linux/types.h>
#include <linux/in6.h>
#include <asm/byteorder.h>
/* The latest drafts declared increase in minimal mtu up to 1280. */
#define IPV6_MIN_MTU 1280
/*
* Advanced API
* source interface/address selection, source routing, etc...
* *under construction*
*/
#if __UAPI_DEF_IN6_PKTINFO
struct in6_pktinfo {
struct in6_addr ipi6_addr;
int ipi6_ifindex;
};
#endif
#if __UAPI_DEF_IP6_MTUINFO
struct ip6_mtuinfo {
struct sockaddr_in6 ip6m_addr;
__u32 ip6m_mtu;
};
#endif
struct in6_ifreq {
struct in6_addr ifr6_addr;
__u32 ifr6_prefixlen;
int ifr6_ifindex;
};
#define IPV6_SRCRT_STRICT 0x01 /* Deprecated; will be removed */
#define IPV6_SRCRT_TYPE_0 0 /* Deprecated; will be removed */
#define IPV6_SRCRT_TYPE_2 2 /* IPv6 type 2 Routing Header */
/*
* routing header
*/
struct ipv6_rt_hdr {
__u8 nexthdr;
__u8 hdrlen;
__u8 type;
__u8 segments_left;
/*
* type specific data
* variable length field
*/
};
struct ipv6_opt_hdr {
__u8 nexthdr;
__u8 hdrlen;
/*
* TLV encoded option data follows.
*/
} __attribute__((packed)); /* required for some archs */
#define ipv6_destopt_hdr ipv6_opt_hdr
#define ipv6_hopopt_hdr ipv6_opt_hdr
/* Router Alert option values (RFC2711) */
#define IPV6_OPT_ROUTERALERT_MLD 0x0000 /* MLD(RFC2710) */
/*
* routing header type 0 (used in cmsghdr struct)
*/
struct rt0_hdr {
struct ipv6_rt_hdr rt_hdr;
__u32 reserved;
struct in6_addr addr[0];
#define rt0_type rt_hdr.type
};
/*
* routing header type 2
*/
struct rt2_hdr {
struct ipv6_rt_hdr rt_hdr;
__u32 reserved;
struct in6_addr addr;
#define rt2_type rt_hdr.type
};
/*
* home address option in destination options header
*/
struct ipv6_destopt_hao {
__u8 type;
__u8 length;
struct in6_addr addr;
} __attribute__((packed));
/*
* IPv6 fixed header
*
* BEWARE, it is incorrect. The first 4 bits of flow_lbl
* are glued to priority now, forming "class".
*/
struct ipv6hdr {
#if defined(__LITTLE_ENDIAN_BITFIELD)
__u8 priority:4,
version:4;
#elif defined(__BIG_ENDIAN_BITFIELD)
__u8 version:4,
priority:4;
#else
#error "Please fix <asm/byteorder.h>"
#endif
__u8 flow_lbl[3];
__be16 payload_len;
__u8 nexthdr;
__u8 hop_limit;
struct in6_addr saddr;
struct in6_addr daddr;
};
/* index values for the variables in ipv6_devconf */
enum {
DEVCONF_FORWARDING = 0,
DEVCONF_HOPLIMIT,
DEVCONF_MTU6,
DEVCONF_ACCEPT_RA,
DEVCONF_ACCEPT_REDIRECTS,
DEVCONF_AUTOCONF,
DEVCONF_DAD_TRANSMITS,
DEVCONF_RTR_SOLICITS,
DEVCONF_RTR_SOLICIT_INTERVAL,
DEVCONF_RTR_SOLICIT_DELAY,
DEVCONF_USE_TEMPADDR,
DEVCONF_TEMP_VALID_LFT,
DEVCONF_TEMP_PREFERED_LFT,
DEVCONF_REGEN_MAX_RETRY,
DEVCONF_MAX_DESYNC_FACTOR,
DEVCONF_MAX_ADDRESSES,
DEVCONF_FORCE_MLD_VERSION,
DEVCONF_ACCEPT_RA_DEFRTR,
DEVCONF_ACCEPT_RA_PINFO,
DEVCONF_ACCEPT_RA_RTR_PREF,
DEVCONF_RTR_PROBE_INTERVAL,
DEVCONF_ACCEPT_RA_RT_INFO_MAX_PLEN,
DEVCONF_PROXY_NDP,
DEVCONF_OPTIMISTIC_DAD,
DEVCONF_ACCEPT_SOURCE_ROUTE,
DEVCONF_MC_FORWARDING,
DEVCONF_DISABLE_IPV6,
DEVCONF_ACCEPT_DAD,
DEVCONF_FORCE_TLLAO,
DEVCONF_NDISC_NOTIFY,
DEVCONF_MLDV1_UNSOLICITED_REPORT_INTERVAL,
DEVCONF_MLDV2_UNSOLICITED_REPORT_INTERVAL,
DEVCONF_SUPPRESS_FRAG_NDISC,
DEVCONF_ACCEPT_RA_FROM_LOCAL,
net: ipv6: Add a sysctl to make optimistic addresses useful candidates Add a sysctl that causes an interface's optimistic addresses to be considered equivalent to other non-deprecated addresses for source address selection purposes. Preferred addresses will still take precedence over optimistic addresses, subject to other ranking in the source address selection algorithm. This is useful where different interfaces are connected to different networks from different ISPs (e.g., a cell network and a home wifi network). The current behaviour complies with RFC 3484/6724, and it makes sense if the host has only one interface, or has multiple interfaces on the same network (same or cooperating administrative domain(s), but not in the multiple distinct networks case. For example, if a mobile device has an IPv6 address on an LTE network and then connects to IPv6-enabled wifi, while the wifi IPv6 address is undergoing DAD, IPv6 connections will try use the wifi default route with the LTE IPv6 address, and will get stuck until they time out. Also, because optimistic nodes can receive frames, issue an RTM_NEWADDR as soon as DAD starts (with the IFA_F_OPTIMSTIC flag appropriately set). A second RTM_NEWADDR is sent if DAD completes (the address flags have changed), otherwise an RTM_DELADDR is sent. Also: add an entry in ip-sysctl.txt for optimistic_dad. Signed-off-by: Erik Kline <ek@google.com> Acked-by: Lorenzo Colitti <lorenzo@google.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-28 16:11:14 +07:00
DEVCONF_USE_OPTIMISTIC,
DEVCONF_ACCEPT_RA_MTU,
DEVCONF_MAX
};
#endif /* _UAPI_IPV6_H */