linux_dsm_epyc7002/tools/perf/util/stat.c

525 lines
12 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 21:07:57 +07:00
// SPDX-License-Identifier: GPL-2.0
#include <errno.h>
#include <inttypes.h>
#include <math.h>
#include <string.h>
#include "counts.h"
#include "cpumap.h"
#include "debug.h"
#include "header.h"
#include "stat.h"
#include "session.h"
#include "target.h"
#include "evlist.h"
#include "evsel.h"
#include "thread_map.h"
#include <linux/zalloc.h>
void update_stats(struct stats *stats, u64 val)
{
double delta;
stats->n++;
delta = val - stats->mean;
stats->mean += delta / stats->n;
stats->M2 += delta*(val - stats->mean);
if (val > stats->max)
stats->max = val;
if (val < stats->min)
stats->min = val;
}
double avg_stats(struct stats *stats)
{
return stats->mean;
}
/*
* http://en.wikipedia.org/wiki/Algorithms_for_calculating_variance
*
* (\Sum n_i^2) - ((\Sum n_i)^2)/n
* s^2 = -------------------------------
* n - 1
*
* http://en.wikipedia.org/wiki/Stddev
*
* The std dev of the mean is related to the std dev by:
*
* s
* s_mean = -------
* sqrt(n)
*
*/
double stddev_stats(struct stats *stats)
{
double variance, variance_mean;
if (stats->n < 2)
return 0.0;
variance = stats->M2 / (stats->n - 1);
variance_mean = variance / stats->n;
return sqrt(variance_mean);
}
double rel_stddev_stats(double stddev, double avg)
{
double pct = 0.0;
if (avg)
pct = 100.0 * stddev/avg;
return pct;
}
bool __perf_evsel_stat__is(struct evsel *evsel,
enum perf_stat_evsel_id id)
{
struct perf_stat_evsel *ps = evsel->stats;
return ps->id == id;
}
#define ID(id, name) [PERF_STAT_EVSEL_ID__##id] = #name
static const char *id_str[PERF_STAT_EVSEL_ID__MAX] = {
ID(NONE, x),
ID(CYCLES_IN_TX, cpu/cycles-t/),
ID(TRANSACTION_START, cpu/tx-start/),
ID(ELISION_START, cpu/el-start/),
ID(CYCLES_IN_TX_CP, cpu/cycles-ct/),
ID(TOPDOWN_TOTAL_SLOTS, topdown-total-slots),
ID(TOPDOWN_SLOTS_ISSUED, topdown-slots-issued),
ID(TOPDOWN_SLOTS_RETIRED, topdown-slots-retired),
ID(TOPDOWN_FETCH_BUBBLES, topdown-fetch-bubbles),
ID(TOPDOWN_RECOVERY_BUBBLES, topdown-recovery-bubbles),
ID(SMI_NUM, msr/smi/),
ID(APERF, msr/aperf/),
};
#undef ID
static void perf_stat_evsel_id_init(struct evsel *evsel)
{
struct perf_stat_evsel *ps = evsel->stats;
int i;
/* ps->id is 0 hence PERF_STAT_EVSEL_ID__NONE by default */
for (i = 0; i < PERF_STAT_EVSEL_ID__MAX; i++) {
if (!strcmp(perf_evsel__name(evsel), id_str[i])) {
ps->id = i;
break;
}
}
}
static void perf_evsel__reset_stat_priv(struct evsel *evsel)
{
int i;
struct perf_stat_evsel *ps = evsel->stats;
for (i = 0; i < 3; i++)
init_stats(&ps->res_stats[i]);
perf_stat_evsel_id_init(evsel);
}
static int perf_evsel__alloc_stat_priv(struct evsel *evsel)
{
evsel->stats = zalloc(sizeof(struct perf_stat_evsel));
if (evsel->stats == NULL)
return -ENOMEM;
perf_evsel__reset_stat_priv(evsel);
return 0;
}
static void perf_evsel__free_stat_priv(struct evsel *evsel)
{
struct perf_stat_evsel *ps = evsel->stats;
if (ps)
zfree(&ps->group_data);
zfree(&evsel->stats);
}
static int perf_evsel__alloc_prev_raw_counts(struct evsel *evsel,
int ncpus, int nthreads)
{
struct perf_counts *counts;
counts = perf_counts__new(ncpus, nthreads);
if (counts)
evsel->prev_raw_counts = counts;
return counts ? 0 : -ENOMEM;
}
static void perf_evsel__free_prev_raw_counts(struct evsel *evsel)
{
perf_counts__delete(evsel->prev_raw_counts);
evsel->prev_raw_counts = NULL;
}
perf stat: Reset previous counts on repeat with interval When using 'perf stat' with repeat and interval option, it shows wrong values for events. The wrong values will be shown for the first interval on the second and subsequent repetitions. Without the fix: # perf stat -r 3 -I 2000 -e faults -e sched:sched_switch -a sleep 5 2.000282489 53 faults 2.000282489 513 sched:sched_switch 4.005478208 3,721 faults 4.005478208 2,666 sched:sched_switch 5.025470933 395 faults 5.025470933 1,307 sched:sched_switch 2.009602825 1,84,46,74,40,73,70,95,47,520 faults <------ 2.009602825 1,84,46,74,40,73,70,95,49,568 sched:sched_switch <------ 4.019612206 4,730 faults 4.019612206 2,746 sched:sched_switch 5.039615484 3,953 faults 5.039615484 1,496 sched:sched_switch 2.000274620 1,84,46,74,40,73,70,95,47,520 faults <------ 2.000274620 1,84,46,74,40,73,70,95,47,520 sched:sched_switch <------ 4.000480342 4,282 faults 4.000480342 2,303 sched:sched_switch 5.000916811 1,322 faults 5.000916811 1,064 sched:sched_switch # prev_raw_counts is allocated when using intervals. This is used when calculating the difference in the counts of events when using interval. The current counts are stored in prev_raw_counts to calculate the differences in the next iteration. On the first interval of the second and subsequent repetitions, prev_raw_counts would be the values stored in the last interval of the previous repetitions, while the current counts will only be for the first interval of the current repetition. Hence there is a possibility of events showing up as big number. Fix this by resetting prev_raw_counts whenever perf stat repeats the command. With the fix: # perf stat -r 3 -I 2000 -e faults -e sched:sched_switch -a sleep 5 2.019349347 2,597 faults 2.019349347 2,753 sched:sched_switch 4.019577372 3,098 faults 4.019577372 2,532 sched:sched_switch 5.019415481 1,879 faults 5.019415481 1,356 sched:sched_switch 2.000178813 8,468 faults 2.000178813 2,254 sched:sched_switch 4.000404621 7,440 faults 4.000404621 1,266 sched:sched_switch 5.040196079 2,458 faults 5.040196079 556 sched:sched_switch 2.000191939 6,870 faults 2.000191939 1,170 sched:sched_switch 4.000414103 541 faults 4.000414103 902 sched:sched_switch 5.000809863 450 faults 5.000809863 364 sched:sched_switch # Committer notes: This was broken since the cset introducing the --interval feature, i.e. --repeat + --interval wasn't tested at that point, add the Fixes tag so that automatic scripts can pick this up. Fixes: 13370a9b5bb8 ("perf stat: Add interval printing") Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: stable@vger.kernel.org # v3.9+ Link: http://lore.kernel.org/lkml/20190904094738.9558-2-srikar@linux.vnet.ibm.com [ Fixed up conflicts with libperf, i.e. some perf_{evsel,evlist} lost the 'perf' prefix ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-04 16:47:37 +07:00
static void perf_evsel__reset_prev_raw_counts(struct evsel *evsel)
{
if (evsel->prev_raw_counts) {
evsel->prev_raw_counts->aggr.val = 0;
evsel->prev_raw_counts->aggr.ena = 0;
evsel->prev_raw_counts->aggr.run = 0;
}
}
static int perf_evsel__alloc_stats(struct evsel *evsel, bool alloc_raw)
{
int ncpus = perf_evsel__nr_cpus(evsel);
int nthreads = perf_thread_map__nr(evsel->core.threads);
if (perf_evsel__alloc_stat_priv(evsel) < 0 ||
perf_evsel__alloc_counts(evsel, ncpus, nthreads) < 0 ||
(alloc_raw && perf_evsel__alloc_prev_raw_counts(evsel, ncpus, nthreads) < 0))
return -ENOMEM;
return 0;
}
int perf_evlist__alloc_stats(struct evlist *evlist, bool alloc_raw)
{
struct evsel *evsel;
evlist__for_each_entry(evlist, evsel) {
if (perf_evsel__alloc_stats(evsel, alloc_raw))
goto out_free;
}
return 0;
out_free:
perf_evlist__free_stats(evlist);
return -1;
}
void perf_evlist__free_stats(struct evlist *evlist)
{
struct evsel *evsel;
evlist__for_each_entry(evlist, evsel) {
perf_evsel__free_stat_priv(evsel);
perf_evsel__free_counts(evsel);
perf_evsel__free_prev_raw_counts(evsel);
}
}
void perf_evlist__reset_stats(struct evlist *evlist)
{
struct evsel *evsel;
evlist__for_each_entry(evlist, evsel) {
perf_evsel__reset_stat_priv(evsel);
perf_evsel__reset_counts(evsel);
}
}
perf stat: Reset previous counts on repeat with interval When using 'perf stat' with repeat and interval option, it shows wrong values for events. The wrong values will be shown for the first interval on the second and subsequent repetitions. Without the fix: # perf stat -r 3 -I 2000 -e faults -e sched:sched_switch -a sleep 5 2.000282489 53 faults 2.000282489 513 sched:sched_switch 4.005478208 3,721 faults 4.005478208 2,666 sched:sched_switch 5.025470933 395 faults 5.025470933 1,307 sched:sched_switch 2.009602825 1,84,46,74,40,73,70,95,47,520 faults <------ 2.009602825 1,84,46,74,40,73,70,95,49,568 sched:sched_switch <------ 4.019612206 4,730 faults 4.019612206 2,746 sched:sched_switch 5.039615484 3,953 faults 5.039615484 1,496 sched:sched_switch 2.000274620 1,84,46,74,40,73,70,95,47,520 faults <------ 2.000274620 1,84,46,74,40,73,70,95,47,520 sched:sched_switch <------ 4.000480342 4,282 faults 4.000480342 2,303 sched:sched_switch 5.000916811 1,322 faults 5.000916811 1,064 sched:sched_switch # prev_raw_counts is allocated when using intervals. This is used when calculating the difference in the counts of events when using interval. The current counts are stored in prev_raw_counts to calculate the differences in the next iteration. On the first interval of the second and subsequent repetitions, prev_raw_counts would be the values stored in the last interval of the previous repetitions, while the current counts will only be for the first interval of the current repetition. Hence there is a possibility of events showing up as big number. Fix this by resetting prev_raw_counts whenever perf stat repeats the command. With the fix: # perf stat -r 3 -I 2000 -e faults -e sched:sched_switch -a sleep 5 2.019349347 2,597 faults 2.019349347 2,753 sched:sched_switch 4.019577372 3,098 faults 4.019577372 2,532 sched:sched_switch 5.019415481 1,879 faults 5.019415481 1,356 sched:sched_switch 2.000178813 8,468 faults 2.000178813 2,254 sched:sched_switch 4.000404621 7,440 faults 4.000404621 1,266 sched:sched_switch 5.040196079 2,458 faults 5.040196079 556 sched:sched_switch 2.000191939 6,870 faults 2.000191939 1,170 sched:sched_switch 4.000414103 541 faults 4.000414103 902 sched:sched_switch 5.000809863 450 faults 5.000809863 364 sched:sched_switch # Committer notes: This was broken since the cset introducing the --interval feature, i.e. --repeat + --interval wasn't tested at that point, add the Fixes tag so that automatic scripts can pick this up. Fixes: 13370a9b5bb8 ("perf stat: Add interval printing") Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: stable@vger.kernel.org # v3.9+ Link: http://lore.kernel.org/lkml/20190904094738.9558-2-srikar@linux.vnet.ibm.com [ Fixed up conflicts with libperf, i.e. some perf_{evsel,evlist} lost the 'perf' prefix ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-09-04 16:47:37 +07:00
void perf_evlist__reset_prev_raw_counts(struct evlist *evlist)
{
struct evsel *evsel;
evlist__for_each_entry(evlist, evsel)
perf_evsel__reset_prev_raw_counts(evsel);
}
static void zero_per_pkg(struct evsel *counter)
{
if (counter->per_pkg_mask)
memset(counter->per_pkg_mask, 0, cpu__max_cpu());
}
static int check_per_pkg(struct evsel *counter,
struct perf_counts_values *vals, int cpu, bool *skip)
{
unsigned long *mask = counter->per_pkg_mask;
struct perf_cpu_map *cpus = evsel__cpus(counter);
int s;
*skip = false;
if (!counter->per_pkg)
return 0;
if (perf_cpu_map__empty(cpus))
return 0;
if (!mask) {
mask = zalloc(cpu__max_cpu());
if (!mask)
return -ENOMEM;
counter->per_pkg_mask = mask;
}
/*
* we do not consider an event that has not run as a good
* instance to mark a package as used (skip=1). Otherwise
* we may run into a situation where the first CPU in a package
* is not running anything, yet the second is, and this function
* would mark the package as used after the first CPU and would
* not read the values from the second CPU.
*/
if (!(vals->run && vals->ena))
return 0;
s = cpu_map__get_socket(cpus, cpu, NULL);
if (s < 0)
return -1;
*skip = test_and_set_bit(s, mask) == 1;
return 0;
}
static int
process_counter_values(struct perf_stat_config *config, struct evsel *evsel,
int cpu, int thread,
struct perf_counts_values *count)
{
struct perf_counts_values *aggr = &evsel->counts->aggr;
static struct perf_counts_values zero;
bool skip = false;
if (check_per_pkg(evsel, count, cpu, &skip)) {
pr_err("failed to read per-pkg counter\n");
return -1;
}
if (skip)
count = &zero;
switch (config->aggr_mode) {
case AGGR_THREAD:
case AGGR_CORE:
case AGGR_DIE:
case AGGR_SOCKET:
perf stat: Add --per-node agregation support Adding new --per-node option to aggregate counts per NUMA nodes for system-wide mode measurements. You can specify --per-node in live mode: # perf stat -a -I 1000 -e cycles --per-node # time node cpus counts unit events 1.000542550 N0 20 6,202,097 cycles 1.000542550 N1 20 639,559 cycles 2.002040063 N0 20 7,412,495 cycles 2.002040063 N1 20 2,185,577 cycles 3.003451699 N0 20 6,508,917 cycles 3.003451699 N1 20 765,607 cycles ... Or in the record/report stat session: # perf stat record -a -I 1000 -e cycles # time counts unit events 1.000536937 10,008,468 cycles 2.002090152 9,578,539 cycles 3.003625233 7,647,869 cycles 4.005135036 7,032,086 cycles ^C 4.340902364 3,923,893 cycles # perf stat report --per-node # time node cpus counts unit events 1.000536937 N0 20 9,355,086 cycles 1.000536937 N1 20 653,382 cycles 2.002090152 N0 20 7,712,838 cycles 2.002090152 N1 20 1,865,701 cycles 3.003625233 N0 20 6,604,441 cycles 3.003625233 N1 20 1,043,428 cycles 4.005135036 N0 20 6,350,522 cycles 4.005135036 N1 20 681,564 cycles 4.340902364 N0 20 3,403,188 cycles 4.340902364 N1 20 520,705 cycles Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Joe Mario <jmario@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20190904073415.723-4-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-28 15:17:43 +07:00
case AGGR_NODE:
case AGGR_NONE:
if (!evsel->snapshot)
perf_evsel__compute_deltas(evsel, cpu, thread, count);
perf_counts_values__scale(count, config->scale, NULL);
perf stat: Support 'percore' event qualifier With this patch, we can use the 'percore' event qualifier in perf-stat. root@skl:/tmp# perf stat -e cpu/event=0,umask=0x3,percore=1/,cpu/event=0,umask=0x3/ -a -A -I1000 1.000773050 S0-C0 98,352,832 cpu/event=0,umask=0x3,percore=1/ (50.01%) 1.000773050 S0-C1 103,763,057 cpu/event=0,umask=0x3,percore=1/ (50.02%) 1.000773050 S0-C2 196,776,995 cpu/event=0,umask=0x3,percore=1/ (50.02%) 1.000773050 S0-C3 176,493,779 cpu/event=0,umask=0x3,percore=1/ (50.02%) 1.000773050 CPU0 47,699,641 cpu/event=0,umask=0x3/ (50.02%) 1.000773050 CPU1 49,052,451 cpu/event=0,umask=0x3/ (49.98%) 1.000773050 CPU2 102,771,422 cpu/event=0,umask=0x3/ (49.98%) 1.000773050 CPU3 100,784,662 cpu/event=0,umask=0x3/ (49.98%) 1.000773050 CPU4 43,171,342 cpu/event=0,umask=0x3/ (49.98%) 1.000773050 CPU5 54,152,158 cpu/event=0,umask=0x3/ (49.98%) 1.000773050 CPU6 93,618,410 cpu/event=0,umask=0x3/ (49.98%) 1.000773050 CPU7 74,477,589 cpu/event=0,umask=0x3/ (49.99%) In this example, we count the event 'ref-cycles' per-core and per-CPU in one perf stat command-line. From the output, we can see: S0-C0 = CPU0 + CPU4 S0-C1 = CPU1 + CPU5 S0-C2 = CPU2 + CPU6 S0-C3 = CPU3 + CPU7 So the result is expected (tiny difference is ignored). Note that, the 'percore' event qualifier needs to use with option '-A'. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1555077590-27664-4-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-04-12 20:59:49 +07:00
if ((config->aggr_mode == AGGR_NONE) && (!evsel->percore)) {
perf_stat__update_shadow_stats(evsel, count->val,
cpu, &rt_stat);
}
if (config->aggr_mode == AGGR_THREAD) {
if (config->stats)
perf_stat__update_shadow_stats(evsel,
count->val, 0, &config->stats[thread]);
else
perf_stat__update_shadow_stats(evsel,
count->val, 0, &rt_stat);
}
break;
case AGGR_GLOBAL:
aggr->val += count->val;
aggr->ena += count->ena;
aggr->run += count->run;
case AGGR_UNSET:
default:
break;
}
return 0;
}
static int process_counter_maps(struct perf_stat_config *config,
struct evsel *counter)
{
int nthreads = perf_thread_map__nr(counter->core.threads);
int ncpus = perf_evsel__nr_cpus(counter);
int cpu, thread;
if (counter->core.system_wide)
nthreads = 1;
for (thread = 0; thread < nthreads; thread++) {
for (cpu = 0; cpu < ncpus; cpu++) {
if (process_counter_values(config, counter, cpu, thread,
perf_counts(counter->counts, cpu, thread)))
return -1;
}
}
return 0;
}
int perf_stat_process_counter(struct perf_stat_config *config,
struct evsel *counter)
{
struct perf_counts_values *aggr = &counter->counts->aggr;
struct perf_stat_evsel *ps = counter->stats;
u64 *count = counter->counts->aggr.values;
int i, ret;
aggr->val = aggr->ena = aggr->run = 0;
perf stat: Fix interval output values We broke interval data displays with commit: 3f416f22d1e2 ("perf stat: Do not clean event's private stats") This commit removed stats cleaning, which is important for '-r' option to carry counters data over the whole run. But it's necessary to clean it for interval mode, otherwise the displayed value is avg of all previous values. Before: $ perf stat -e cycles -a -I 1000 record # time counts unit events 1.000240796 75,216,287 cycles 2.000512791 107,823,524 cycles $ perf stat report # time counts unit events 1.000240796 75,216,287 cycles 2.000512791 91,519,906 cycles Now: $ perf stat report # time counts unit events 1.000240796 75,216,287 cycles 2.000512791 107,823,524 cycles Notice the second value being bigger (91,.. < 107,..). This could be easily verified by using perf script which displays raw stat data: $ perf script CPU THREAD VAL ENA RUN TIME EVENT 0 -1 23855779 1000209530 1000209530 1000240796 cycles 1 -1 33340397 1000224964 1000224964 1000240796 cycles 2 -1 15835415 1000226695 1000226695 1000240796 cycles 3 -1 2184696 1000228245 1000228245 1000240796 cycles 0 -1 97014312 2000514533 2000514533 2000512791 cycles 1 -1 46121497 2000543795 2000543795 2000512791 cycles 2 -1 32269530 2000543566 2000543566 2000512791 cycles 3 -1 7634472 2000544108 2000544108 2000512791 cycles The sum of the first 4 values is the first interval aggregated value: 23855779 + 33340397 + 15835415 + 2184696 = 75,216,287 The sum of the second 4 values minus first value is the second interval aggregated value: 97014312 + 46121497 + 32269530 + 7634472 - 75216287 = 107,823,524 Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1454485436-20639-1-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 14:43:56 +07:00
/*
* We calculate counter's data every interval,
* and the display code shows ps->res_stats
* avg value. We need to zero the stats for
* interval mode, otherwise overall avg running
* averages will be shown for each interval.
*/
if (config->interval)
init_stats(ps->res_stats);
if (counter->per_pkg)
zero_per_pkg(counter);
ret = process_counter_maps(config, counter);
if (ret)
return ret;
if (config->aggr_mode != AGGR_GLOBAL)
return 0;
if (!counter->snapshot)
perf_evsel__compute_deltas(counter, -1, -1, aggr);
perf_counts_values__scale(aggr, config->scale, &counter->counts->scaled);
for (i = 0; i < 3; i++)
update_stats(&ps->res_stats[i], count[i]);
if (verbose > 0) {
fprintf(config->output, "%s: %" PRIu64 " %" PRIu64 " %" PRIu64 "\n",
perf_evsel__name(counter), count[0], count[1], count[2]);
}
/*
* Save the full runtime - to allow normalization during printout:
*/
perf_stat__update_shadow_stats(counter, *count, 0, &rt_stat);
return 0;
}
int perf_event__process_stat_event(struct perf_session *session,
union perf_event *event)
{
struct perf_counts_values count;
struct perf_record_stat *st = &event->stat;
struct evsel *counter;
count.val = st->val;
count.ena = st->ena;
count.run = st->run;
counter = perf_evlist__id2evsel(session->evlist, st->id);
if (!counter) {
pr_err("Failed to resolve counter for stat event.\n");
return -EINVAL;
}
*perf_counts(counter->counts, st->cpu, st->thread) = count;
counter->supported = true;
return 0;
}
size_t perf_event__fprintf_stat(union perf_event *event, FILE *fp)
{
struct perf_record_stat *st = (struct perf_record_stat *)event;
size_t ret;
ret = fprintf(fp, "\n... id %" PRI_lu64 ", cpu %d, thread %d\n",
st->id, st->cpu, st->thread);
ret += fprintf(fp, "... value %" PRI_lu64 ", enabled %" PRI_lu64 ", running %" PRI_lu64 "\n",
st->val, st->ena, st->run);
return ret;
}
size_t perf_event__fprintf_stat_round(union perf_event *event, FILE *fp)
{
struct perf_record_stat_round *rd = (struct perf_record_stat_round *)event;
size_t ret;
ret = fprintf(fp, "\n... time %" PRI_lu64 ", type %s\n", rd->time,
rd->type == PERF_STAT_ROUND_TYPE__FINAL ? "FINAL" : "INTERVAL");
return ret;
}
size_t perf_event__fprintf_stat_config(union perf_event *event, FILE *fp)
{
struct perf_stat_config sc;
size_t ret;
perf_event__read_stat_config(&sc, &event->stat_config);
ret = fprintf(fp, "\n");
ret += fprintf(fp, "... aggr_mode %d\n", sc.aggr_mode);
ret += fprintf(fp, "... scale %d\n", sc.scale);
ret += fprintf(fp, "... interval %u\n", sc.interval);
return ret;
}
int create_perf_stat_counter(struct evsel *evsel,
struct perf_stat_config *config,
struct target *target)
{
libperf: Move perf_event_attr field from perf's evsel to libperf's perf_evsel Move the perf_event_attr struct fron 'struct evsel' to 'struct perf_evsel'. Committer notes: Fixed up these: tools/perf/arch/arm/util/auxtrace.c tools/perf/arch/arm/util/cs-etm.c tools/perf/arch/arm64/util/arm-spe.c tools/perf/arch/s390/util/auxtrace.c tools/perf/util/cs-etm.c Also cc1: warnings being treated as errors tests/sample-parsing.c: In function 'do_test': tests/sample-parsing.c:162: error: missing initializer tests/sample-parsing.c:162: error: (near initialization for 'evsel.core.cpus') struct evsel evsel = { .needs_swap = false, - .core.attr = { - .sample_type = sample_type, - .read_format = read_format, + .core = { + . attr = { + .sample_type = sample_type, + .read_format = read_format, + }, [perfbuilder@a70e4eeb5549 /]$ gcc --version |& head -1 gcc (GCC) 4.4.7 Also we don't need to include perf_event.h in tools/perf/lib/include/perf/evsel.h, forward declaring 'struct perf_event_attr' is enough. And this even fixes the build in some systems where things are used somewhere down the include path from perf_event.h without defining __always_inline. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-43-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-21 18:24:29 +07:00
struct perf_event_attr *attr = &evsel->core.attr;
struct evsel *leader = evsel->leader;
attr->read_format = PERF_FORMAT_TOTAL_TIME_ENABLED |
PERF_FORMAT_TOTAL_TIME_RUNNING;
/*
* The event is part of non trivial group, let's enable
* the group read (for leader) and ID retrieval for all
* members.
*/
if (leader->core.nr_members > 1)
attr->read_format |= PERF_FORMAT_ID|PERF_FORMAT_GROUP;
attr->inherit = !config->no_inherit;
/*
* Some events get initialized with sample_(period/type) set,
* like tracepoints. Clear it up for counting.
*/
attr->sample_period = 0;
if (config->identifier)
attr->sample_type = PERF_SAMPLE_IDENTIFIER;
if (config->all_user) {
attr->exclude_kernel = 1;
attr->exclude_user = 0;
}
if (config->all_kernel) {
attr->exclude_kernel = 0;
attr->exclude_user = 1;
}
/*
* Disabling all counters initially, they will be enabled
* either manually by us or by kernel via enable_on_exec
* set later.
*/
if (perf_evsel__is_group_leader(evsel)) {
attr->disabled = 1;
/*
* In case of initial_delay we enable tracee
* events manually.
*/
if (target__none(target) && !config->initial_delay)
attr->enable_on_exec = 1;
}
if (target__has_cpu(target) && !target__has_per_thread(target))
return perf_evsel__open_per_cpu(evsel, evsel__cpus(evsel));
return perf_evsel__open_per_thread(evsel, evsel->core.threads);
}