perf auxtrace: Support for perf report -D for s390
Add initial support for s390 auxiliary traces using the CPU-Measurement
Sampling Facility.
Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data
file. Later patches will show the contents of the auxiliary traces.
Setup the auxtrace queues and data structures for s390. A raw dump of
the perf.data file now does not show an error when an auxtrace event is
encountered.
Output before:
[root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace
0x128 [0x10]: failed to process type: 70
Error:
failed to process sample
0x128 [0x10]: event: 70
.
. ... raw event: size 16 bytes
. 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............
0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0
[root@s35lp76 perf]#
Output after:
# ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE
0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
....
Additional notes about the underlying hardware and software
implementation, provided by Hendrik Brueckner (see Link: below).
=============================================================================
The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain
performance information on the mainframe. Basically, it was introduced
with System z10 years ago for the z/Architecture, that means, 64-bit.
For Linux, there are two facilities of interest, counter facility and sampling
facility. The counter facility provides hardware counters for instructions,
cycles, crypto-activities, and many more.
The sampling facility is a hardware sampler that when started will write
samples at a particular interval into a sampling buffer. At some point,
for example, if a sample block is full, it generates an interrupt to collect
samples (while the sampler continues to run).
Few years ago, I started to provide the a perf PMU to use the counter
and sampling facilities. Recently, the device driver was updated to also
"export" the sampling buffer into the AUX area. Thomas now completed the
related perf work to interpret and process these AUX data.
If people are more interested in the sampling facility, they can have a
look into:
- The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05
http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a
and to learn how-to use it for Linux on Z, have look at chapter 54,
"Using the CPU-measurement facilities" in the:
- Device Drivers, Features, and Commands, SC33-8411-34
http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf
=============================================================================
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-02 14:46:20 +07:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
/*
|
|
|
|
* Copyright IBM Corp. 2018
|
|
|
|
* Auxtrace support for s390 CPU-Measurement Sampling Facility
|
|
|
|
*
|
|
|
|
* Author(s): Thomas Richter <tmricht@linux.ibm.com>
|
2018-08-02 14:46:22 +07:00
|
|
|
*
|
|
|
|
* Auxiliary traces are collected during 'perf record' using rbd000 event.
|
|
|
|
* Several PERF_RECORD_XXX are generated during recording:
|
|
|
|
*
|
|
|
|
* PERF_RECORD_AUX:
|
|
|
|
* Records that new data landed in the AUX buffer part.
|
|
|
|
* PERF_RECORD_AUXTRACE:
|
|
|
|
* Defines auxtrace data. Followed by the actual data. The contents of
|
|
|
|
* the auxtrace data is dependent on the event and the CPU.
|
|
|
|
* This record is generated by perf record command. For details
|
|
|
|
* see Documentation/perf.data-file-format.txt.
|
|
|
|
* PERF_RECORD_AUXTRACE_INFO:
|
|
|
|
* Defines a table of contains for PERF_RECORD_AUXTRACE records. This
|
2019-05-22 13:43:25 +07:00
|
|
|
* record is generated during 'perf record' command. Each record contains
|
|
|
|
* up to 256 entries describing offset and size of the AUXTRACE data in the
|
2018-08-02 14:46:22 +07:00
|
|
|
* perf.data file.
|
|
|
|
* PERF_RECORD_AUXTRACE_ERROR:
|
|
|
|
* Indicates an error during AUXTRACE collection such as buffer overflow.
|
|
|
|
* PERF_RECORD_FINISHED_ROUND:
|
|
|
|
* Perf events are not necessarily in time stamp order, as they can be
|
|
|
|
* collected in parallel on different CPUs. If the events should be
|
|
|
|
* processed in time order they need to be sorted first.
|
|
|
|
* Perf report guarantees that there is no reordering over a
|
|
|
|
* PERF_RECORD_FINISHED_ROUND boundary event. All perf records with a
|
|
|
|
* time stamp lower than this record are processed (and displayed) before
|
|
|
|
* the succeeding perf record are processed.
|
|
|
|
*
|
|
|
|
* These records are evaluated during perf report command.
|
|
|
|
*
|
|
|
|
* 1. PERF_RECORD_AUXTRACE_INFO is used to set up the infrastructure for
|
|
|
|
* auxiliary trace data processing. See s390_cpumsf_process_auxtrace_info()
|
|
|
|
* below.
|
|
|
|
* Auxiliary trace data is collected per CPU. To merge the data into the report
|
|
|
|
* an auxtrace_queue is created for each CPU. It is assumed that the auxtrace
|
|
|
|
* data is in ascending order.
|
|
|
|
*
|
|
|
|
* Each queue has a double linked list of auxtrace_buffers. This list contains
|
|
|
|
* the offset and size of a CPU's auxtrace data. During auxtrace processing
|
|
|
|
* the data portion is mmap()'ed.
|
|
|
|
*
|
|
|
|
* To sort the queues in chronological order, all queue access is controlled
|
|
|
|
* by the auxtrace_heap. This is basicly a stack, each stack element has two
|
|
|
|
* entries, the queue number and a time stamp. However the stack is sorted by
|
|
|
|
* the time stamps. The highest time stamp is at the bottom the lowest
|
|
|
|
* (nearest) time stamp is at the top. That sort order is maintained at all
|
|
|
|
* times!
|
|
|
|
*
|
|
|
|
* After the auxtrace infrastructure has been setup, the auxtrace queues are
|
|
|
|
* filled with data (offset/size pairs) and the auxtrace_heap is populated.
|
|
|
|
*
|
|
|
|
* 2. PERF_RECORD_XXX processing triggers access to the auxtrace_queues.
|
|
|
|
* Each record is handled by s390_cpumsf_process_event(). The time stamp of
|
|
|
|
* the perf record is compared with the time stamp located on the auxtrace_heap
|
|
|
|
* top element. If that time stamp is lower than the time stamp from the
|
|
|
|
* record sample, the auxtrace queues will be processed. As auxtrace queues
|
|
|
|
* control many auxtrace_buffers and each buffer can be quite large, the
|
|
|
|
* auxtrace buffer might be processed only partially. In this case the
|
|
|
|
* position in the auxtrace_buffer of that queue is remembered and the time
|
|
|
|
* stamp of the last processed entry of the auxtrace_buffer replaces the
|
|
|
|
* current auxtrace_heap top.
|
|
|
|
*
|
|
|
|
* 3. Auxtrace_queues might run of out data and are feeded by the
|
|
|
|
* PERF_RECORD_AUXTRACE handling, see s390_cpumsf_process_auxtrace_event().
|
|
|
|
*
|
|
|
|
* Event Generation
|
|
|
|
* Each sampling-data entry in the auxilary trace data generates a perf sample.
|
|
|
|
* This sample is filled
|
|
|
|
* with data from the auxtrace such as PID/TID, instruction address, CPU state,
|
|
|
|
* etc. This sample is processed with perf_session__deliver_synth_event() to
|
|
|
|
* be included into the GUI.
|
|
|
|
*
|
|
|
|
* 4. PERF_RECORD_FINISHED_ROUND event is used to process all the remaining
|
|
|
|
* auxiliary traces entries until the time stamp of this record is reached
|
|
|
|
* auxtrace_heap top. This is triggered by ordered_event->deliver().
|
|
|
|
*
|
|
|
|
*
|
|
|
|
* Perf event processing.
|
|
|
|
* Event processing of PERF_RECORD_XXX entries relies on time stamp entries.
|
|
|
|
* This is the function call sequence:
|
|
|
|
*
|
|
|
|
* __cmd_report()
|
|
|
|
* |
|
|
|
|
* perf_session__process_events()
|
|
|
|
* |
|
|
|
|
* __perf_session__process_events()
|
|
|
|
* |
|
|
|
|
* perf_session__process_event()
|
|
|
|
* | This functions splits the PERF_RECORD_XXX records.
|
|
|
|
* | - Those generated by perf record command (type number equal or higher
|
|
|
|
* | than PERF_RECORD_USER_TYPE_START) are handled by
|
|
|
|
* | perf_session__process_user_event(see below)
|
|
|
|
* | - Those generated by the kernel are handled by
|
|
|
|
* | perf_evlist__parse_sample_timestamp()
|
|
|
|
* |
|
|
|
|
* perf_evlist__parse_sample_timestamp()
|
|
|
|
* | Extract time stamp from sample data.
|
|
|
|
* |
|
|
|
|
* perf_session__queue_event()
|
|
|
|
* | If timestamp is positive the sample is entered into an ordered_event
|
|
|
|
* | list, sort order is the timestamp. The event processing is deferred until
|
|
|
|
* | later (see perf_session__process_user_event()).
|
|
|
|
* | Other timestamps (0 or -1) are handled immediately by
|
|
|
|
* | perf_session__deliver_event(). These are events generated at start up
|
|
|
|
* | of command perf record. They create PERF_RECORD_COMM and PERF_RECORD_MMAP*
|
|
|
|
* | records. They are needed to create a list of running processes and its
|
|
|
|
* | memory mappings and layout. They are needed at the beginning to enable
|
|
|
|
* | command perf report to create process trees and memory mappings.
|
|
|
|
* |
|
|
|
|
* perf_session__deliver_event()
|
|
|
|
* | Delivers a PERF_RECORD_XXX entry for handling.
|
|
|
|
* |
|
|
|
|
* auxtrace__process_event()
|
|
|
|
* | The timestamp of the PERF_RECORD_XXX entry is taken to correlate with
|
|
|
|
* | time stamps from the auxiliary trace buffers. This enables
|
|
|
|
* | synchronization between auxiliary trace data and the events on the
|
|
|
|
* | perf.data file.
|
|
|
|
* |
|
|
|
|
* machine__deliver_event()
|
|
|
|
* | Handles the PERF_RECORD_XXX event. This depends on the record type.
|
|
|
|
* It might update the process tree, update a process memory map or enter
|
|
|
|
* a sample with IP and call back chain data into GUI data pool.
|
|
|
|
*
|
|
|
|
*
|
|
|
|
* Deferred processing determined by perf_session__process_user_event() is
|
|
|
|
* finally processed when a PERF_RECORD_FINISHED_ROUND is encountered. These
|
|
|
|
* are generated during command perf record.
|
|
|
|
* The timestamp of PERF_RECORD_FINISHED_ROUND event is taken to process all
|
|
|
|
* PERF_RECORD_XXX entries stored in the ordered_event list. This list was
|
|
|
|
* built up while reading the perf.data file.
|
|
|
|
* Each event is now processed by calling perf_session__deliver_event().
|
|
|
|
* This enables time synchronization between the data in the perf.data file and
|
|
|
|
* the data in the auxiliary trace buffers.
|
perf auxtrace: Support for perf report -D for s390
Add initial support for s390 auxiliary traces using the CPU-Measurement
Sampling Facility.
Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data
file. Later patches will show the contents of the auxiliary traces.
Setup the auxtrace queues and data structures for s390. A raw dump of
the perf.data file now does not show an error when an auxtrace event is
encountered.
Output before:
[root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace
0x128 [0x10]: failed to process type: 70
Error:
failed to process sample
0x128 [0x10]: event: 70
.
. ... raw event: size 16 bytes
. 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............
0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0
[root@s35lp76 perf]#
Output after:
# ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE
0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
....
Additional notes about the underlying hardware and software
implementation, provided by Hendrik Brueckner (see Link: below).
=============================================================================
The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain
performance information on the mainframe. Basically, it was introduced
with System z10 years ago for the z/Architecture, that means, 64-bit.
For Linux, there are two facilities of interest, counter facility and sampling
facility. The counter facility provides hardware counters for instructions,
cycles, crypto-activities, and many more.
The sampling facility is a hardware sampler that when started will write
samples at a particular interval into a sampling buffer. At some point,
for example, if a sample block is full, it generates an interrupt to collect
samples (while the sampler continues to run).
Few years ago, I started to provide the a perf PMU to use the counter
and sampling facilities. Recently, the device driver was updated to also
"export" the sampling buffer into the AUX area. Thomas now completed the
related perf work to interpret and process these AUX data.
If people are more interested in the sampling facility, they can have a
look into:
- The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05
http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a
and to learn how-to use it for Linux on Z, have look at chapter 54,
"Using the CPU-measurement facilities" in the:
- Device Drivers, Features, and Commands, SC33-8411-34
http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf
=============================================================================
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-02 14:46:20 +07:00
|
|
|
*/
|
|
|
|
|
|
|
|
#include <endian.h>
|
|
|
|
#include <errno.h>
|
|
|
|
#include <byteswap.h>
|
|
|
|
#include <inttypes.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/types.h>
|
|
|
|
#include <linux/bitops.h>
|
|
|
|
#include <linux/log2.h>
|
2019-07-04 21:32:27 +07:00
|
|
|
#include <linux/zalloc.h>
|
perf auxtrace: Support for perf report -D for s390
Add initial support for s390 auxiliary traces using the CPU-Measurement
Sampling Facility.
Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data
file. Later patches will show the contents of the auxiliary traces.
Setup the auxtrace queues and data structures for s390. A raw dump of
the perf.data file now does not show an error when an auxtrace event is
encountered.
Output before:
[root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace
0x128 [0x10]: failed to process type: 70
Error:
failed to process sample
0x128 [0x10]: event: 70
.
. ... raw event: size 16 bytes
. 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............
0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0
[root@s35lp76 perf]#
Output after:
# ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE
0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
....
Additional notes about the underlying hardware and software
implementation, provided by Hendrik Brueckner (see Link: below).
=============================================================================
The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain
performance information on the mainframe. Basically, it was introduced
with System z10 years ago for the z/Architecture, that means, 64-bit.
For Linux, there are two facilities of interest, counter facility and sampling
facility. The counter facility provides hardware counters for instructions,
cycles, crypto-activities, and many more.
The sampling facility is a hardware sampler that when started will write
samples at a particular interval into a sampling buffer. At some point,
for example, if a sample block is full, it generates an interrupt to collect
samples (while the sampler continues to run).
Few years ago, I started to provide the a perf PMU to use the counter
and sampling facilities. Recently, the device driver was updated to also
"export" the sampling buffer into the AUX area. Thomas now completed the
related perf work to interpret and process these AUX data.
If people are more interested in the sampling facility, they can have a
look into:
- The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05
http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a
and to learn how-to use it for Linux on Z, have look at chapter 54,
"Using the CPU-measurement facilities" in the:
- Device Drivers, Features, and Commands, SC33-8411-34
http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf
=============================================================================
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-02 14:46:20 +07:00
|
|
|
|
2018-08-09 11:56:50 +07:00
|
|
|
#include <sys/stat.h>
|
|
|
|
#include <sys/types.h>
|
|
|
|
|
perf auxtrace: Support for perf report -D for s390
Add initial support for s390 auxiliary traces using the CPU-Measurement
Sampling Facility.
Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data
file. Later patches will show the contents of the auxiliary traces.
Setup the auxtrace queues and data structures for s390. A raw dump of
the perf.data file now does not show an error when an auxtrace event is
encountered.
Output before:
[root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace
0x128 [0x10]: failed to process type: 70
Error:
failed to process sample
0x128 [0x10]: event: 70
.
. ... raw event: size 16 bytes
. 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............
0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0
[root@s35lp76 perf]#
Output after:
# ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE
0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
....
Additional notes about the underlying hardware and software
implementation, provided by Hendrik Brueckner (see Link: below).
=============================================================================
The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain
performance information on the mainframe. Basically, it was introduced
with System z10 years ago for the z/Architecture, that means, 64-bit.
For Linux, there are two facilities of interest, counter facility and sampling
facility. The counter facility provides hardware counters for instructions,
cycles, crypto-activities, and many more.
The sampling facility is a hardware sampler that when started will write
samples at a particular interval into a sampling buffer. At some point,
for example, if a sample block is full, it generates an interrupt to collect
samples (while the sampler continues to run).
Few years ago, I started to provide the a perf PMU to use the counter
and sampling facilities. Recently, the device driver was updated to also
"export" the sampling buffer into the AUX area. Thomas now completed the
related perf work to interpret and process these AUX data.
If people are more interested in the sampling facility, they can have a
look into:
- The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05
http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a
and to learn how-to use it for Linux on Z, have look at chapter 54,
"Using the CPU-measurement facilities" in the:
- Device Drivers, Features, and Commands, SC33-8411-34
http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf
=============================================================================
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-02 14:46:20 +07:00
|
|
|
#include "color.h"
|
|
|
|
#include "evsel.h"
|
|
|
|
#include "evlist.h"
|
|
|
|
#include "machine.h"
|
|
|
|
#include "session.h"
|
2019-08-30 21:11:01 +07:00
|
|
|
#include "tool.h"
|
perf auxtrace: Support for perf report -D for s390
Add initial support for s390 auxiliary traces using the CPU-Measurement
Sampling Facility.
Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data
file. Later patches will show the contents of the auxiliary traces.
Setup the auxtrace queues and data structures for s390. A raw dump of
the perf.data file now does not show an error when an auxtrace event is
encountered.
Output before:
[root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace
0x128 [0x10]: failed to process type: 70
Error:
failed to process sample
0x128 [0x10]: event: 70
.
. ... raw event: size 16 bytes
. 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............
0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0
[root@s35lp76 perf]#
Output after:
# ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE
0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
....
Additional notes about the underlying hardware and software
implementation, provided by Hendrik Brueckner (see Link: below).
=============================================================================
The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain
performance information on the mainframe. Basically, it was introduced
with System z10 years ago for the z/Architecture, that means, 64-bit.
For Linux, there are two facilities of interest, counter facility and sampling
facility. The counter facility provides hardware counters for instructions,
cycles, crypto-activities, and many more.
The sampling facility is a hardware sampler that when started will write
samples at a particular interval into a sampling buffer. At some point,
for example, if a sample block is full, it generates an interrupt to collect
samples (while the sampler continues to run).
Few years ago, I started to provide the a perf PMU to use the counter
and sampling facilities. Recently, the device driver was updated to also
"export" the sampling buffer into the AUX area. Thomas now completed the
related perf work to interpret and process these AUX data.
If people are more interested in the sampling facility, they can have a
look into:
- The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05
http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a
and to learn how-to use it for Linux on Z, have look at chapter 54,
"Using the CPU-measurement facilities" in the:
- Device Drivers, Features, and Commands, SC33-8411-34
http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf
=============================================================================
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-02 14:46:20 +07:00
|
|
|
#include "debug.h"
|
|
|
|
#include "auxtrace.h"
|
|
|
|
#include "s390-cpumsf.h"
|
2018-08-02 14:46:21 +07:00
|
|
|
#include "s390-cpumsf-kernel.h"
|
2019-01-17 16:30:03 +07:00
|
|
|
#include "s390-cpumcf-kernel.h"
|
2018-08-09 11:56:50 +07:00
|
|
|
#include "config.h"
|
perf auxtrace: Support for perf report -D for s390
Add initial support for s390 auxiliary traces using the CPU-Measurement
Sampling Facility.
Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data
file. Later patches will show the contents of the auxiliary traces.
Setup the auxtrace queues and data structures for s390. A raw dump of
the perf.data file now does not show an error when an auxtrace event is
encountered.
Output before:
[root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace
0x128 [0x10]: failed to process type: 70
Error:
failed to process sample
0x128 [0x10]: event: 70
.
. ... raw event: size 16 bytes
. 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............
0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0
[root@s35lp76 perf]#
Output after:
# ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE
0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
....
Additional notes about the underlying hardware and software
implementation, provided by Hendrik Brueckner (see Link: below).
=============================================================================
The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain
performance information on the mainframe. Basically, it was introduced
with System z10 years ago for the z/Architecture, that means, 64-bit.
For Linux, there are two facilities of interest, counter facility and sampling
facility. The counter facility provides hardware counters for instructions,
cycles, crypto-activities, and many more.
The sampling facility is a hardware sampler that when started will write
samples at a particular interval into a sampling buffer. At some point,
for example, if a sample block is full, it generates an interrupt to collect
samples (while the sampler continues to run).
Few years ago, I started to provide the a perf PMU to use the counter
and sampling facilities. Recently, the device driver was updated to also
"export" the sampling buffer into the AUX area. Thomas now completed the
related perf work to interpret and process these AUX data.
If people are more interested in the sampling facility, they can have a
look into:
- The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05
http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a
and to learn how-to use it for Linux on Z, have look at chapter 54,
"Using the CPU-measurement facilities" in the:
- Device Drivers, Features, and Commands, SC33-8411-34
http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf
=============================================================================
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-02 14:46:20 +07:00
|
|
|
|
|
|
|
struct s390_cpumsf {
|
|
|
|
struct auxtrace auxtrace;
|
|
|
|
struct auxtrace_queues queues;
|
|
|
|
struct auxtrace_heap heap;
|
|
|
|
struct perf_session *session;
|
|
|
|
struct machine *machine;
|
|
|
|
u32 auxtrace_type;
|
|
|
|
u32 pmu_type;
|
2018-08-02 14:46:21 +07:00
|
|
|
u16 machine_type;
|
2018-08-02 14:46:22 +07:00
|
|
|
bool data_queued;
|
2018-08-09 11:56:50 +07:00
|
|
|
bool use_logfile;
|
|
|
|
char *logdir;
|
2018-08-02 14:46:22 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
struct s390_cpumsf_queue {
|
|
|
|
struct s390_cpumsf *sf;
|
|
|
|
unsigned int queue_nr;
|
|
|
|
struct auxtrace_buffer *buffer;
|
|
|
|
int cpu;
|
2018-08-09 11:56:50 +07:00
|
|
|
FILE *logfile;
|
2019-01-17 16:30:03 +07:00
|
|
|
FILE *logfile_ctr;
|
perf auxtrace: Support for perf report -D for s390
Add initial support for s390 auxiliary traces using the CPU-Measurement
Sampling Facility.
Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data
file. Later patches will show the contents of the auxiliary traces.
Setup the auxtrace queues and data structures for s390. A raw dump of
the perf.data file now does not show an error when an auxtrace event is
encountered.
Output before:
[root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace
0x128 [0x10]: failed to process type: 70
Error:
failed to process sample
0x128 [0x10]: event: 70
.
. ... raw event: size 16 bytes
. 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............
0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0
[root@s35lp76 perf]#
Output after:
# ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE
0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
....
Additional notes about the underlying hardware and software
implementation, provided by Hendrik Brueckner (see Link: below).
=============================================================================
The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain
performance information on the mainframe. Basically, it was introduced
with System z10 years ago for the z/Architecture, that means, 64-bit.
For Linux, there are two facilities of interest, counter facility and sampling
facility. The counter facility provides hardware counters for instructions,
cycles, crypto-activities, and many more.
The sampling facility is a hardware sampler that when started will write
samples at a particular interval into a sampling buffer. At some point,
for example, if a sample block is full, it generates an interrupt to collect
samples (while the sampler continues to run).
Few years ago, I started to provide the a perf PMU to use the counter
and sampling facilities. Recently, the device driver was updated to also
"export" the sampling buffer into the AUX area. Thomas now completed the
related perf work to interpret and process these AUX data.
If people are more interested in the sampling facility, they can have a
look into:
- The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05
http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a
and to learn how-to use it for Linux on Z, have look at chapter 54,
"Using the CPU-measurement facilities" in the:
- Device Drivers, Features, and Commands, SC33-8411-34
http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf
=============================================================================
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-02 14:46:20 +07:00
|
|
|
};
|
|
|
|
|
2019-01-17 16:30:03 +07:00
|
|
|
/* Check if the raw data should be dumped to file. If this is the case and
|
|
|
|
* the file to dump to has not been opened for writing, do so.
|
|
|
|
*
|
|
|
|
* Return 0 on success and greater zero on error so processing continues.
|
|
|
|
*/
|
|
|
|
static int s390_cpumcf_dumpctr(struct s390_cpumsf *sf,
|
|
|
|
struct perf_sample *sample)
|
|
|
|
{
|
|
|
|
struct s390_cpumsf_queue *sfq;
|
|
|
|
struct auxtrace_queue *q;
|
|
|
|
int rc = 0;
|
|
|
|
|
|
|
|
if (!sf->use_logfile || sf->queues.nr_queues <= sample->cpu)
|
|
|
|
return rc;
|
|
|
|
|
|
|
|
q = &sf->queues.queue_array[sample->cpu];
|
|
|
|
sfq = q->priv;
|
|
|
|
if (!sfq) /* Queue not yet allocated */
|
|
|
|
return rc;
|
|
|
|
|
|
|
|
if (!sfq->logfile_ctr) {
|
|
|
|
char *name;
|
|
|
|
|
|
|
|
rc = (sf->logdir)
|
|
|
|
? asprintf(&name, "%s/aux.ctr.%02x",
|
|
|
|
sf->logdir, sample->cpu)
|
|
|
|
: asprintf(&name, "aux.ctr.%02x", sample->cpu);
|
|
|
|
if (rc > 0)
|
|
|
|
sfq->logfile_ctr = fopen(name, "w");
|
|
|
|
if (sfq->logfile_ctr == NULL) {
|
|
|
|
pr_err("Failed to open counter set log file %s, "
|
|
|
|
"continue...\n", name);
|
|
|
|
rc = 1;
|
|
|
|
}
|
|
|
|
free(name);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (sfq->logfile_ctr) {
|
|
|
|
/* See comment above for -4 */
|
|
|
|
size_t n = fwrite(sample->raw_data, sample->raw_size - 4, 1,
|
|
|
|
sfq->logfile_ctr);
|
|
|
|
if (n != 1) {
|
|
|
|
pr_err("Failed to write counter set data\n");
|
|
|
|
rc = 1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
2019-05-22 13:43:25 +07:00
|
|
|
/* Display s390 CPU measurement facility basic-sampling data entry
|
|
|
|
* Data written on s390 in big endian byte order and contains bit
|
|
|
|
* fields across byte boundaries.
|
|
|
|
*/
|
2018-08-02 14:46:21 +07:00
|
|
|
static bool s390_cpumsf_basic_show(const char *color, size_t pos,
|
2019-05-22 13:43:25 +07:00
|
|
|
struct hws_basic_entry *basicp)
|
2018-08-02 14:46:21 +07:00
|
|
|
{
|
2019-05-22 13:43:25 +07:00
|
|
|
struct hws_basic_entry *basic = basicp;
|
|
|
|
#if __BYTE_ORDER == __LITTLE_ENDIAN
|
|
|
|
struct hws_basic_entry local;
|
|
|
|
unsigned long long word = be64toh(*(unsigned long long *)basicp);
|
|
|
|
|
|
|
|
memset(&local, 0, sizeof(local));
|
|
|
|
local.def = be16toh(basicp->def);
|
|
|
|
local.prim_asn = word & 0xffff;
|
|
|
|
local.CL = word >> 30 & 0x3;
|
|
|
|
local.I = word >> 32 & 0x1;
|
|
|
|
local.AS = word >> 33 & 0x3;
|
|
|
|
local.P = word >> 35 & 0x1;
|
|
|
|
local.W = word >> 36 & 0x1;
|
|
|
|
local.T = word >> 37 & 0x1;
|
|
|
|
local.U = word >> 40 & 0xf;
|
|
|
|
local.ia = be64toh(basicp->ia);
|
|
|
|
local.gpp = be64toh(basicp->gpp);
|
|
|
|
local.hpp = be64toh(basicp->hpp);
|
|
|
|
basic = &local;
|
|
|
|
#endif
|
2018-08-02 14:46:21 +07:00
|
|
|
if (basic->def != 1) {
|
|
|
|
pr_err("Invalid AUX trace basic entry [%#08zx]\n", pos);
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
color_fprintf(stdout, color, " [%#08zx] Basic Def:%04x Inst:%#04x"
|
|
|
|
" %c%c%c%c AS:%d ASN:%#04x IA:%#018llx\n"
|
|
|
|
"\t\tCL:%d HPP:%#018llx GPP:%#018llx\n",
|
|
|
|
pos, basic->def, basic->U,
|
|
|
|
basic->T ? 'T' : ' ',
|
|
|
|
basic->W ? 'W' : ' ',
|
|
|
|
basic->P ? 'P' : ' ',
|
|
|
|
basic->I ? 'I' : ' ',
|
|
|
|
basic->AS, basic->prim_asn, basic->ia, basic->CL,
|
|
|
|
basic->hpp, basic->gpp);
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
2019-05-22 13:43:25 +07:00
|
|
|
/* Display s390 CPU measurement facility diagnostic-sampling data entry.
|
|
|
|
* Data written on s390 in big endian byte order and contains bit
|
|
|
|
* fields across byte boundaries.
|
|
|
|
*/
|
2018-08-02 14:46:21 +07:00
|
|
|
static bool s390_cpumsf_diag_show(const char *color, size_t pos,
|
2019-05-22 13:43:25 +07:00
|
|
|
struct hws_diag_entry *diagp)
|
2018-08-02 14:46:21 +07:00
|
|
|
{
|
2019-05-22 13:43:25 +07:00
|
|
|
struct hws_diag_entry *diag = diagp;
|
|
|
|
#if __BYTE_ORDER == __LITTLE_ENDIAN
|
|
|
|
struct hws_diag_entry local;
|
|
|
|
unsigned long long word = be64toh(*(unsigned long long *)diagp);
|
|
|
|
|
|
|
|
local.def = be16toh(diagp->def);
|
|
|
|
local.I = word >> 32 & 0x1;
|
|
|
|
diag = &local;
|
|
|
|
#endif
|
2018-08-02 14:46:21 +07:00
|
|
|
if (diag->def < S390_CPUMSF_DIAG_DEF_FIRST) {
|
|
|
|
pr_err("Invalid AUX trace diagnostic entry [%#08zx]\n", pos);
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
color_fprintf(stdout, color, " [%#08zx] Diag Def:%04x %c\n",
|
|
|
|
pos, diag->def, diag->I ? 'I' : ' ');
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Return TOD timestamp contained in an trailer entry */
|
2019-05-22 13:43:25 +07:00
|
|
|
static unsigned long long trailer_timestamp(struct hws_trailer_entry *te,
|
|
|
|
int idx)
|
2018-08-02 14:46:21 +07:00
|
|
|
{
|
|
|
|
/* te->t set: TOD in STCKE format, bytes 8-15
|
|
|
|
* to->t not set: TOD in STCK format, bytes 0-7
|
|
|
|
*/
|
|
|
|
unsigned long long ts;
|
|
|
|
|
2019-05-22 13:43:25 +07:00
|
|
|
memcpy(&ts, &te->timestamp[idx], sizeof(ts));
|
|
|
|
return be64toh(ts);
|
2018-08-02 14:46:21 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Display s390 CPU measurement facility trailer entry */
|
|
|
|
static bool s390_cpumsf_trailer_show(const char *color, size_t pos,
|
|
|
|
struct hws_trailer_entry *te)
|
|
|
|
{
|
2019-05-22 13:43:25 +07:00
|
|
|
#if __BYTE_ORDER == __LITTLE_ENDIAN
|
|
|
|
struct hws_trailer_entry local;
|
|
|
|
const unsigned long long flags = be64toh(te->flags);
|
|
|
|
|
|
|
|
memset(&local, 0, sizeof(local));
|
|
|
|
local.f = flags >> 63 & 0x1;
|
|
|
|
local.a = flags >> 62 & 0x1;
|
|
|
|
local.t = flags >> 61 & 0x1;
|
|
|
|
local.bsdes = be16toh((flags >> 16 & 0xffff));
|
|
|
|
local.dsdes = be16toh((flags & 0xffff));
|
|
|
|
memcpy(&local.timestamp, te->timestamp, sizeof(te->timestamp));
|
|
|
|
local.overflow = be64toh(te->overflow);
|
|
|
|
local.clock_base = be64toh(te->progusage[0]) >> 63 & 1;
|
|
|
|
local.progusage2 = be64toh(te->progusage2);
|
|
|
|
te = &local;
|
|
|
|
#endif
|
2018-08-02 14:46:21 +07:00
|
|
|
if (te->bsdes != sizeof(struct hws_basic_entry)) {
|
|
|
|
pr_err("Invalid AUX trace trailer entry [%#08zx]\n", pos);
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
color_fprintf(stdout, color, " [%#08zx] Trailer %c%c%c bsdes:%d"
|
|
|
|
" dsdes:%d Overflow:%lld Time:%#llx\n"
|
2019-05-22 13:43:25 +07:00
|
|
|
"\t\tC:%d TOD:%#lx\n",
|
2018-08-02 14:46:21 +07:00
|
|
|
pos,
|
|
|
|
te->f ? 'F' : ' ',
|
|
|
|
te->a ? 'A' : ' ',
|
|
|
|
te->t ? 'T' : ' ',
|
|
|
|
te->bsdes, te->dsdes, te->overflow,
|
2019-05-22 13:43:25 +07:00
|
|
|
trailer_timestamp(te, te->clock_base),
|
|
|
|
te->clock_base, te->progusage2);
|
2018-08-02 14:46:21 +07:00
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Test a sample data block. It must be 4KB or a multiple thereof in size and
|
|
|
|
* 4KB page aligned. Each sample data page has a trailer entry at the
|
|
|
|
* end which contains the sample entry data sizes.
|
|
|
|
*
|
|
|
|
* Return true if the sample data block passes the checks and set the
|
|
|
|
* basic set entry size and diagnostic set entry size.
|
|
|
|
*
|
|
|
|
* Return false on failure.
|
|
|
|
*
|
|
|
|
* Note: Old hardware does not set the basic or diagnostic entry sizes
|
|
|
|
* in the trailer entry. Use the type number instead.
|
|
|
|
*/
|
|
|
|
static bool s390_cpumsf_validate(int machine_type,
|
|
|
|
unsigned char *buf, size_t len,
|
|
|
|
unsigned short *bsdes,
|
|
|
|
unsigned short *dsdes)
|
|
|
|
{
|
|
|
|
struct hws_basic_entry *basic = (struct hws_basic_entry *)buf;
|
|
|
|
struct hws_trailer_entry *te;
|
|
|
|
|
|
|
|
*dsdes = *bsdes = 0;
|
|
|
|
if (len & (S390_CPUMSF_PAGESZ - 1)) /* Illegal size */
|
|
|
|
return false;
|
2019-05-22 13:43:25 +07:00
|
|
|
if (be16toh(basic->def) != 1) /* No basic set entry, must be first */
|
2018-08-02 14:46:21 +07:00
|
|
|
return false;
|
|
|
|
/* Check for trailer entry at end of SDB */
|
|
|
|
te = (struct hws_trailer_entry *)(buf + S390_CPUMSF_PAGESZ
|
|
|
|
- sizeof(*te));
|
2019-05-22 13:43:25 +07:00
|
|
|
*bsdes = be16toh(te->bsdes);
|
|
|
|
*dsdes = be16toh(te->dsdes);
|
2018-08-02 14:46:21 +07:00
|
|
|
if (!te->bsdes && !te->dsdes) {
|
|
|
|
/* Very old hardware, use CPUID */
|
|
|
|
switch (machine_type) {
|
|
|
|
case 2097:
|
|
|
|
case 2098:
|
|
|
|
*dsdes = 64;
|
|
|
|
*bsdes = 32;
|
|
|
|
break;
|
|
|
|
case 2817:
|
|
|
|
case 2818:
|
|
|
|
*dsdes = 74;
|
|
|
|
*bsdes = 32;
|
|
|
|
break;
|
|
|
|
case 2827:
|
|
|
|
case 2828:
|
|
|
|
*dsdes = 85;
|
|
|
|
*bsdes = 32;
|
|
|
|
break;
|
2019-02-11 17:06:27 +07:00
|
|
|
case 2964:
|
|
|
|
case 2965:
|
|
|
|
*dsdes = 112;
|
|
|
|
*bsdes = 32;
|
|
|
|
break;
|
2018-08-02 14:46:21 +07:00
|
|
|
default:
|
|
|
|
/* Illegal trailer entry */
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Return true if there is room for another entry */
|
|
|
|
static bool s390_cpumsf_reached_trailer(size_t entry_sz, size_t pos)
|
|
|
|
{
|
|
|
|
size_t payload = S390_CPUMSF_PAGESZ - sizeof(struct hws_trailer_entry);
|
|
|
|
|
|
|
|
if (payload - (pos & (S390_CPUMSF_PAGESZ - 1)) < entry_sz)
|
|
|
|
return false;
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Dump an auxiliary buffer. These buffers are multiple of
|
|
|
|
* 4KB SDB pages.
|
|
|
|
*/
|
|
|
|
static void s390_cpumsf_dump(struct s390_cpumsf *sf,
|
|
|
|
unsigned char *buf, size_t len)
|
|
|
|
{
|
|
|
|
const char *color = PERF_COLOR_BLUE;
|
|
|
|
struct hws_basic_entry *basic;
|
|
|
|
struct hws_diag_entry *diag;
|
|
|
|
unsigned short bsdes, dsdes;
|
2018-08-02 14:46:22 +07:00
|
|
|
size_t pos = 0;
|
2018-08-02 14:46:21 +07:00
|
|
|
|
|
|
|
color_fprintf(stdout, color,
|
|
|
|
". ... s390 AUX data: size %zu bytes\n",
|
|
|
|
len);
|
|
|
|
|
|
|
|
if (!s390_cpumsf_validate(sf->machine_type, buf, len, &bsdes,
|
|
|
|
&dsdes)) {
|
|
|
|
pr_err("Invalid AUX trace data block size:%zu"
|
|
|
|
" (type:%d bsdes:%hd dsdes:%hd)\n",
|
|
|
|
len, sf->machine_type, bsdes, dsdes);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* s390 kernel always returns 4KB blocks fully occupied,
|
|
|
|
* no partially filled SDBs.
|
|
|
|
*/
|
|
|
|
while (pos < len) {
|
|
|
|
/* Handle Basic entry */
|
|
|
|
basic = (struct hws_basic_entry *)(buf + pos);
|
|
|
|
if (s390_cpumsf_basic_show(color, pos, basic))
|
|
|
|
pos += bsdes;
|
|
|
|
else
|
|
|
|
return;
|
|
|
|
|
|
|
|
/* Handle Diagnostic entry */
|
|
|
|
diag = (struct hws_diag_entry *)(buf + pos);
|
|
|
|
if (s390_cpumsf_diag_show(color, pos, diag))
|
|
|
|
pos += dsdes;
|
|
|
|
else
|
|
|
|
return;
|
|
|
|
|
|
|
|
/* Check for trailer entry */
|
|
|
|
if (!s390_cpumsf_reached_trailer(bsdes + dsdes, pos)) {
|
|
|
|
/* Show trailer entry */
|
|
|
|
struct hws_trailer_entry te;
|
|
|
|
|
|
|
|
pos = (pos + S390_CPUMSF_PAGESZ)
|
|
|
|
& ~(S390_CPUMSF_PAGESZ - 1);
|
|
|
|
pos -= sizeof(te);
|
|
|
|
memcpy(&te, buf + pos, sizeof(te));
|
|
|
|
/* Set descriptor sizes in case of old hardware
|
|
|
|
* where these values are not set.
|
|
|
|
*/
|
|
|
|
te.bsdes = bsdes;
|
|
|
|
te.dsdes = dsdes;
|
|
|
|
if (s390_cpumsf_trailer_show(color, pos, &te))
|
|
|
|
pos += sizeof(te);
|
|
|
|
else
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void s390_cpumsf_dump_event(struct s390_cpumsf *sf, unsigned char *buf,
|
|
|
|
size_t len)
|
|
|
|
{
|
|
|
|
printf(".\n");
|
|
|
|
s390_cpumsf_dump(sf, buf, len);
|
|
|
|
}
|
|
|
|
|
2018-08-02 14:46:22 +07:00
|
|
|
#define S390_LPP_PID_MASK 0xffffffff
|
|
|
|
|
|
|
|
static bool s390_cpumsf_make_event(size_t pos,
|
|
|
|
struct hws_basic_entry *basic,
|
|
|
|
struct s390_cpumsf_queue *sfq)
|
|
|
|
{
|
|
|
|
struct perf_sample sample = {
|
|
|
|
.ip = basic->ia,
|
|
|
|
.pid = basic->hpp & S390_LPP_PID_MASK,
|
|
|
|
.tid = basic->hpp & S390_LPP_PID_MASK,
|
|
|
|
.cpumode = PERF_RECORD_MISC_CPUMODE_UNKNOWN,
|
|
|
|
.cpu = sfq->cpu,
|
|
|
|
.period = 1
|
|
|
|
};
|
|
|
|
union perf_event event;
|
|
|
|
|
|
|
|
memset(&event, 0, sizeof(event));
|
|
|
|
if (basic->CL == 1) /* Native LPAR mode */
|
|
|
|
sample.cpumode = basic->P ? PERF_RECORD_MISC_USER
|
|
|
|
: PERF_RECORD_MISC_KERNEL;
|
|
|
|
else if (basic->CL == 2) /* Guest kernel/user space */
|
|
|
|
sample.cpumode = basic->P ? PERF_RECORD_MISC_GUEST_USER
|
|
|
|
: PERF_RECORD_MISC_GUEST_KERNEL;
|
|
|
|
else if (basic->gpp || basic->prim_asn != 0xffff)
|
|
|
|
/* Use heuristics on old hardware */
|
|
|
|
sample.cpumode = basic->P ? PERF_RECORD_MISC_GUEST_USER
|
|
|
|
: PERF_RECORD_MISC_GUEST_KERNEL;
|
|
|
|
else
|
|
|
|
sample.cpumode = basic->P ? PERF_RECORD_MISC_USER
|
|
|
|
: PERF_RECORD_MISC_KERNEL;
|
|
|
|
|
|
|
|
event.sample.header.type = PERF_RECORD_SAMPLE;
|
|
|
|
event.sample.header.misc = sample.cpumode;
|
|
|
|
event.sample.header.size = sizeof(struct perf_event_header);
|
|
|
|
|
|
|
|
pr_debug4("%s pos:%#zx ip:%#" PRIx64 " P:%d CL:%d pid:%d.%d cpumode:%d cpu:%d\n",
|
|
|
|
__func__, pos, sample.ip, basic->P, basic->CL, sample.pid,
|
|
|
|
sample.tid, sample.cpumode, sample.cpu);
|
|
|
|
if (perf_session__deliver_synth_event(sfq->sf->session, &event,
|
|
|
|
&sample)) {
|
|
|
|
pr_err("s390 Auxiliary Trace: failed to deliver event\n");
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
static unsigned long long get_trailer_time(const unsigned char *buf)
|
|
|
|
{
|
|
|
|
struct hws_trailer_entry *te;
|
2019-05-22 13:43:25 +07:00
|
|
|
unsigned long long aux_time, progusage2;
|
|
|
|
bool clock_base;
|
2018-08-02 14:46:22 +07:00
|
|
|
|
|
|
|
te = (struct hws_trailer_entry *)(buf + S390_CPUMSF_PAGESZ
|
|
|
|
- sizeof(*te));
|
|
|
|
|
2019-05-22 13:43:25 +07:00
|
|
|
#if __BYTE_ORDER == __LITTLE_ENDIAN
|
|
|
|
clock_base = be64toh(te->progusage[0]) >> 63 & 0x1;
|
|
|
|
progusage2 = be64toh(te->progusage[1]);
|
|
|
|
#else
|
|
|
|
clock_base = te->clock_base;
|
|
|
|
progusage2 = te->progusage2;
|
|
|
|
#endif
|
|
|
|
if (!clock_base) /* TOD_CLOCK_BASE value missing */
|
2018-08-02 14:46:22 +07:00
|
|
|
return 0;
|
|
|
|
|
|
|
|
/* Correct calculation to convert time stamp in trailer entry to
|
|
|
|
* nano seconds (taken from arch/s390 function tod_to_ns()).
|
|
|
|
* TOD_CLOCK_BASE is stored in trailer entry member progusage2.
|
|
|
|
*/
|
2019-05-22 13:43:25 +07:00
|
|
|
aux_time = trailer_timestamp(te, clock_base) - progusage2;
|
2018-08-02 14:46:22 +07:00
|
|
|
aux_time = (aux_time >> 9) * 125 + (((aux_time & 0x1ff) * 125) >> 9);
|
|
|
|
return aux_time;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Process the data samples of a single queue. The first parameter is a
|
|
|
|
* pointer to the queue, the second parameter is the time stamp. This
|
|
|
|
* is the time stamp:
|
|
|
|
* - of the event that triggered this processing.
|
|
|
|
* - or the time stamp when the last proccesing of this queue stopped.
|
|
|
|
* In this case it stopped at a 4KB page boundary and record the
|
|
|
|
* position on where to continue processing on the next invocation
|
|
|
|
* (see buffer->use_data and buffer->use_size).
|
|
|
|
*
|
|
|
|
* When this function returns the second parameter is updated to
|
|
|
|
* reflect the time stamp of the last processed auxiliary data entry
|
|
|
|
* (taken from the trailer entry of that page). The caller uses this
|
|
|
|
* returned time stamp to record the last processed entry in this
|
|
|
|
* queue.
|
|
|
|
*
|
|
|
|
* The function returns:
|
|
|
|
* 0: Processing successful. The second parameter returns the
|
|
|
|
* time stamp from the trailer entry until which position
|
|
|
|
* processing took place. Subsequent calls resume from this
|
|
|
|
* position.
|
|
|
|
* <0: An error occurred during processing. The second parameter
|
|
|
|
* returns the maximum time stamp.
|
|
|
|
* >0: Done on this queue. The second parameter returns the
|
|
|
|
* maximum time stamp.
|
|
|
|
*/
|
|
|
|
static int s390_cpumsf_samples(struct s390_cpumsf_queue *sfq, u64 *ts)
|
|
|
|
{
|
|
|
|
struct s390_cpumsf *sf = sfq->sf;
|
|
|
|
unsigned char *buf = sfq->buffer->use_data;
|
|
|
|
size_t len = sfq->buffer->use_size;
|
|
|
|
struct hws_basic_entry *basic;
|
|
|
|
unsigned short bsdes, dsdes;
|
|
|
|
size_t pos = 0;
|
|
|
|
int err = 1;
|
|
|
|
u64 aux_ts;
|
|
|
|
|
|
|
|
if (!s390_cpumsf_validate(sf->machine_type, buf, len, &bsdes,
|
|
|
|
&dsdes)) {
|
|
|
|
*ts = ~0ULL;
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Get trailer entry time stamp and check if entries in
|
|
|
|
* this auxiliary page are ready for processing. If the
|
|
|
|
* time stamp of the first entry is too high, whole buffer
|
|
|
|
* can be skipped. In this case return time stamp.
|
|
|
|
*/
|
|
|
|
aux_ts = get_trailer_time(buf);
|
|
|
|
if (!aux_ts) {
|
|
|
|
pr_err("[%#08" PRIx64 "] Invalid AUX trailer entry TOD clock base\n",
|
2018-12-12 02:43:40 +07:00
|
|
|
(s64)sfq->buffer->data_offset);
|
2018-08-02 14:46:22 +07:00
|
|
|
aux_ts = ~0ULL;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
if (aux_ts > *ts) {
|
|
|
|
*ts = aux_ts;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
while (pos < len) {
|
|
|
|
/* Handle Basic entry */
|
|
|
|
basic = (struct hws_basic_entry *)(buf + pos);
|
|
|
|
if (s390_cpumsf_make_event(pos, basic, sfq))
|
|
|
|
pos += bsdes;
|
|
|
|
else {
|
|
|
|
err = -EBADF;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
pos += dsdes; /* Skip diagnositic entry */
|
|
|
|
|
|
|
|
/* Check for trailer entry */
|
|
|
|
if (!s390_cpumsf_reached_trailer(bsdes + dsdes, pos)) {
|
|
|
|
pos = (pos + S390_CPUMSF_PAGESZ)
|
|
|
|
& ~(S390_CPUMSF_PAGESZ - 1);
|
|
|
|
/* Check existence of next page */
|
|
|
|
if (pos >= len)
|
|
|
|
break;
|
|
|
|
aux_ts = get_trailer_time(buf + pos);
|
|
|
|
if (!aux_ts) {
|
|
|
|
aux_ts = ~0ULL;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
if (aux_ts > *ts) {
|
|
|
|
*ts = aux_ts;
|
|
|
|
sfq->buffer->use_data += pos;
|
|
|
|
sfq->buffer->use_size -= pos;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
out:
|
|
|
|
*ts = aux_ts;
|
|
|
|
sfq->buffer->use_size = 0;
|
|
|
|
sfq->buffer->use_data = NULL;
|
|
|
|
return err; /* Buffer completely scanned or error */
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Run the s390 auxiliary trace decoder.
|
|
|
|
* Select the queue buffer to operate on, the caller already selected
|
|
|
|
* the proper queue, depending on second parameter 'ts'.
|
|
|
|
* This is the time stamp until which the auxiliary entries should
|
|
|
|
* be processed. This value is updated by called functions and
|
|
|
|
* returned to the caller.
|
|
|
|
*
|
|
|
|
* Resume processing in the current buffer. If there is no buffer
|
|
|
|
* get a new buffer from the queue and setup start position for
|
|
|
|
* processing.
|
|
|
|
* When a buffer is completely processed remove it from the queue
|
|
|
|
* before returning.
|
|
|
|
*
|
|
|
|
* This function returns
|
|
|
|
* 1: When the queue is empty. Second parameter will be set to
|
|
|
|
* maximum time stamp.
|
|
|
|
* 0: Normal processing done.
|
|
|
|
* <0: Error during queue buffer setup. This causes the caller
|
|
|
|
* to stop processing completely.
|
|
|
|
*/
|
|
|
|
static int s390_cpumsf_run_decoder(struct s390_cpumsf_queue *sfq,
|
|
|
|
u64 *ts)
|
|
|
|
{
|
|
|
|
|
|
|
|
struct auxtrace_buffer *buffer;
|
|
|
|
struct auxtrace_queue *queue;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
queue = &sfq->sf->queues.queue_array[sfq->queue_nr];
|
|
|
|
|
|
|
|
/* Get buffer and last position in buffer to resume
|
|
|
|
* decoding the auxiliary entries. One buffer might be large
|
|
|
|
* and decoding might stop in between. This depends on the time
|
|
|
|
* stamp of the trailer entry in each page of the auxiliary
|
|
|
|
* data and the time stamp of the event triggering the decoding.
|
|
|
|
*/
|
|
|
|
if (sfq->buffer == NULL) {
|
|
|
|
sfq->buffer = buffer = auxtrace_buffer__next(queue,
|
|
|
|
sfq->buffer);
|
|
|
|
if (!buffer) {
|
|
|
|
*ts = ~0ULL;
|
|
|
|
return 1; /* Processing done on this queue */
|
|
|
|
}
|
|
|
|
/* Start with a new buffer on this queue */
|
|
|
|
if (buffer->data) {
|
|
|
|
buffer->use_size = buffer->size;
|
|
|
|
buffer->use_data = buffer->data;
|
|
|
|
}
|
2018-08-09 11:56:50 +07:00
|
|
|
if (sfq->logfile) { /* Write into log file */
|
|
|
|
size_t rc = fwrite(buffer->data, buffer->size, 1,
|
|
|
|
sfq->logfile);
|
|
|
|
if (rc != 1)
|
|
|
|
pr_err("Failed to write auxiliary data\n");
|
|
|
|
}
|
2018-08-02 14:46:22 +07:00
|
|
|
} else
|
|
|
|
buffer = sfq->buffer;
|
|
|
|
|
|
|
|
if (!buffer->data) {
|
|
|
|
int fd = perf_data__fd(sfq->sf->session->data);
|
|
|
|
|
|
|
|
buffer->data = auxtrace_buffer__get_data(buffer, fd);
|
|
|
|
if (!buffer->data)
|
|
|
|
return -ENOMEM;
|
|
|
|
buffer->use_size = buffer->size;
|
|
|
|
buffer->use_data = buffer->data;
|
2018-08-09 11:56:50 +07:00
|
|
|
|
|
|
|
if (sfq->logfile) { /* Write into log file */
|
|
|
|
size_t rc = fwrite(buffer->data, buffer->size, 1,
|
|
|
|
sfq->logfile);
|
|
|
|
if (rc != 1)
|
|
|
|
pr_err("Failed to write auxiliary data\n");
|
|
|
|
}
|
2018-08-02 14:46:22 +07:00
|
|
|
}
|
|
|
|
pr_debug4("%s queue_nr:%d buffer:%" PRId64 " offset:%#" PRIx64 " size:%#zx rest:%#zx\n",
|
|
|
|
__func__, sfq->queue_nr, buffer->buffer_nr, buffer->offset,
|
|
|
|
buffer->size, buffer->use_size);
|
|
|
|
err = s390_cpumsf_samples(sfq, ts);
|
|
|
|
|
|
|
|
/* If non-zero, there is either an error (err < 0) or the buffer is
|
|
|
|
* completely done (err > 0). The error is unrecoverable, usually
|
|
|
|
* some descriptors could not be read successfully, so continue with
|
|
|
|
* the next buffer.
|
|
|
|
* In both cases the parameter 'ts' has been updated.
|
|
|
|
*/
|
|
|
|
if (err) {
|
|
|
|
sfq->buffer = NULL;
|
2019-07-04 22:13:46 +07:00
|
|
|
list_del_init(&buffer->list);
|
2018-08-02 14:46:22 +07:00
|
|
|
auxtrace_buffer__free(buffer);
|
|
|
|
if (err > 0) /* Buffer done, no error */
|
|
|
|
err = 0;
|
|
|
|
}
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct s390_cpumsf_queue *
|
|
|
|
s390_cpumsf_alloc_queue(struct s390_cpumsf *sf, unsigned int queue_nr)
|
|
|
|
{
|
|
|
|
struct s390_cpumsf_queue *sfq;
|
|
|
|
|
|
|
|
sfq = zalloc(sizeof(struct s390_cpumsf_queue));
|
|
|
|
if (sfq == NULL)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
sfq->sf = sf;
|
|
|
|
sfq->queue_nr = queue_nr;
|
|
|
|
sfq->cpu = -1;
|
2018-08-09 11:56:50 +07:00
|
|
|
if (sf->use_logfile) {
|
|
|
|
char *name;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
rc = (sf->logdir)
|
|
|
|
? asprintf(&name, "%s/aux.smp.%02x",
|
|
|
|
sf->logdir, queue_nr)
|
|
|
|
: asprintf(&name, "aux.smp.%02x", queue_nr);
|
|
|
|
if (rc > 0)
|
|
|
|
sfq->logfile = fopen(name, "w");
|
|
|
|
if (sfq->logfile == NULL) {
|
|
|
|
pr_err("Failed to open auxiliary log file %s,"
|
|
|
|
"continue...\n", name);
|
|
|
|
sf->use_logfile = false;
|
|
|
|
}
|
|
|
|
free(name);
|
|
|
|
}
|
2018-08-02 14:46:22 +07:00
|
|
|
return sfq;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int s390_cpumsf_setup_queue(struct s390_cpumsf *sf,
|
|
|
|
struct auxtrace_queue *queue,
|
|
|
|
unsigned int queue_nr, u64 ts)
|
|
|
|
{
|
|
|
|
struct s390_cpumsf_queue *sfq = queue->priv;
|
|
|
|
|
|
|
|
if (list_empty(&queue->head))
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
if (sfq == NULL) {
|
|
|
|
sfq = s390_cpumsf_alloc_queue(sf, queue_nr);
|
|
|
|
if (!sfq)
|
|
|
|
return -ENOMEM;
|
|
|
|
queue->priv = sfq;
|
|
|
|
|
|
|
|
if (queue->cpu != -1)
|
|
|
|
sfq->cpu = queue->cpu;
|
|
|
|
}
|
|
|
|
return auxtrace_heap__add(&sf->heap, queue_nr, ts);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int s390_cpumsf_setup_queues(struct s390_cpumsf *sf, u64 ts)
|
|
|
|
{
|
|
|
|
unsigned int i;
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
for (i = 0; i < sf->queues.nr_queues; i++) {
|
|
|
|
ret = s390_cpumsf_setup_queue(sf, &sf->queues.queue_array[i],
|
|
|
|
i, ts);
|
|
|
|
if (ret)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int s390_cpumsf_update_queues(struct s390_cpumsf *sf, u64 ts)
|
|
|
|
{
|
|
|
|
if (!sf->queues.new_data)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
sf->queues.new_data = false;
|
|
|
|
return s390_cpumsf_setup_queues(sf, ts);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int s390_cpumsf_process_queues(struct s390_cpumsf *sf, u64 timestamp)
|
|
|
|
{
|
|
|
|
unsigned int queue_nr;
|
|
|
|
u64 ts;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
while (1) {
|
|
|
|
struct auxtrace_queue *queue;
|
|
|
|
struct s390_cpumsf_queue *sfq;
|
|
|
|
|
|
|
|
if (!sf->heap.heap_cnt)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
if (sf->heap.heap_array[0].ordinal >= timestamp)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
queue_nr = sf->heap.heap_array[0].queue_nr;
|
|
|
|
queue = &sf->queues.queue_array[queue_nr];
|
|
|
|
sfq = queue->priv;
|
|
|
|
|
|
|
|
auxtrace_heap__pop(&sf->heap);
|
|
|
|
if (sf->heap.heap_cnt) {
|
|
|
|
ts = sf->heap.heap_array[0].ordinal + 1;
|
|
|
|
if (ts > timestamp)
|
|
|
|
ts = timestamp;
|
|
|
|
} else {
|
|
|
|
ts = timestamp;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = s390_cpumsf_run_decoder(sfq, &ts);
|
|
|
|
if (ret < 0) {
|
|
|
|
auxtrace_heap__add(&sf->heap, queue_nr, ts);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
if (!ret) {
|
|
|
|
ret = auxtrace_heap__add(&sf->heap, queue_nr, ts);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int s390_cpumsf_synth_error(struct s390_cpumsf *sf, int code, int cpu,
|
2019-02-06 17:39:47 +07:00
|
|
|
pid_t pid, pid_t tid, u64 ip, u64 timestamp)
|
2018-08-02 14:46:22 +07:00
|
|
|
{
|
|
|
|
char msg[MAX_AUXTRACE_ERROR_MSG];
|
|
|
|
union perf_event event;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
strncpy(msg, "Lost Auxiliary Trace Buffer", sizeof(msg) - 1);
|
|
|
|
auxtrace_synth_error(&event.auxtrace_error, PERF_AUXTRACE_ERROR_ITRACE,
|
2019-02-06 17:39:47 +07:00
|
|
|
code, cpu, pid, tid, ip, msg, timestamp);
|
2018-08-02 14:46:22 +07:00
|
|
|
|
|
|
|
err = perf_session__deliver_synth_event(sf->session, &event, NULL);
|
|
|
|
if (err)
|
|
|
|
pr_err("s390 Auxiliary Trace: failed to deliver error event,"
|
|
|
|
"error %d\n", err);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int s390_cpumsf_lost(struct s390_cpumsf *sf, struct perf_sample *sample)
|
|
|
|
{
|
|
|
|
return s390_cpumsf_synth_error(sf, 1, sample->cpu,
|
2019-02-06 17:39:47 +07:00
|
|
|
sample->pid, sample->tid, 0,
|
|
|
|
sample->time);
|
2018-08-02 14:46:22 +07:00
|
|
|
}
|
|
|
|
|
perf auxtrace: Support for perf report -D for s390
Add initial support for s390 auxiliary traces using the CPU-Measurement
Sampling Facility.
Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data
file. Later patches will show the contents of the auxiliary traces.
Setup the auxtrace queues and data structures for s390. A raw dump of
the perf.data file now does not show an error when an auxtrace event is
encountered.
Output before:
[root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace
0x128 [0x10]: failed to process type: 70
Error:
failed to process sample
0x128 [0x10]: event: 70
.
. ... raw event: size 16 bytes
. 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............
0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0
[root@s35lp76 perf]#
Output after:
# ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE
0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
....
Additional notes about the underlying hardware and software
implementation, provided by Hendrik Brueckner (see Link: below).
=============================================================================
The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain
performance information on the mainframe. Basically, it was introduced
with System z10 years ago for the z/Architecture, that means, 64-bit.
For Linux, there are two facilities of interest, counter facility and sampling
facility. The counter facility provides hardware counters for instructions,
cycles, crypto-activities, and many more.
The sampling facility is a hardware sampler that when started will write
samples at a particular interval into a sampling buffer. At some point,
for example, if a sample block is full, it generates an interrupt to collect
samples (while the sampler continues to run).
Few years ago, I started to provide the a perf PMU to use the counter
and sampling facilities. Recently, the device driver was updated to also
"export" the sampling buffer into the AUX area. Thomas now completed the
related perf work to interpret and process these AUX data.
If people are more interested in the sampling facility, they can have a
look into:
- The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05
http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a
and to learn how-to use it for Linux on Z, have look at chapter 54,
"Using the CPU-measurement facilities" in the:
- Device Drivers, Features, and Commands, SC33-8411-34
http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf
=============================================================================
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-02 14:46:20 +07:00
|
|
|
static int
|
2019-01-17 16:30:03 +07:00
|
|
|
s390_cpumsf_process_event(struct perf_session *session,
|
2018-08-02 14:46:22 +07:00
|
|
|
union perf_event *event,
|
|
|
|
struct perf_sample *sample,
|
|
|
|
struct perf_tool *tool)
|
perf auxtrace: Support for perf report -D for s390
Add initial support for s390 auxiliary traces using the CPU-Measurement
Sampling Facility.
Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data
file. Later patches will show the contents of the auxiliary traces.
Setup the auxtrace queues and data structures for s390. A raw dump of
the perf.data file now does not show an error when an auxtrace event is
encountered.
Output before:
[root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace
0x128 [0x10]: failed to process type: 70
Error:
failed to process sample
0x128 [0x10]: event: 70
.
. ... raw event: size 16 bytes
. 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............
0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0
[root@s35lp76 perf]#
Output after:
# ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE
0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
....
Additional notes about the underlying hardware and software
implementation, provided by Hendrik Brueckner (see Link: below).
=============================================================================
The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain
performance information on the mainframe. Basically, it was introduced
with System z10 years ago for the z/Architecture, that means, 64-bit.
For Linux, there are two facilities of interest, counter facility and sampling
facility. The counter facility provides hardware counters for instructions,
cycles, crypto-activities, and many more.
The sampling facility is a hardware sampler that when started will write
samples at a particular interval into a sampling buffer. At some point,
for example, if a sample block is full, it generates an interrupt to collect
samples (while the sampler continues to run).
Few years ago, I started to provide the a perf PMU to use the counter
and sampling facilities. Recently, the device driver was updated to also
"export" the sampling buffer into the AUX area. Thomas now completed the
related perf work to interpret and process these AUX data.
If people are more interested in the sampling facility, they can have a
look into:
- The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05
http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a
and to learn how-to use it for Linux on Z, have look at chapter 54,
"Using the CPU-measurement facilities" in the:
- Device Drivers, Features, and Commands, SC33-8411-34
http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf
=============================================================================
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-02 14:46:20 +07:00
|
|
|
{
|
2018-08-02 14:46:22 +07:00
|
|
|
struct s390_cpumsf *sf = container_of(session->auxtrace,
|
|
|
|
struct s390_cpumsf,
|
|
|
|
auxtrace);
|
|
|
|
u64 timestamp = sample->time;
|
2019-07-21 18:23:51 +07:00
|
|
|
struct evsel *ev_bc000;
|
2019-01-17 16:30:03 +07:00
|
|
|
|
2018-08-02 14:46:22 +07:00
|
|
|
int err = 0;
|
|
|
|
|
|
|
|
if (dump_trace)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
if (!tool->ordered_events) {
|
|
|
|
pr_err("s390 Auxiliary Trace requires ordered events\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2019-01-17 16:30:03 +07:00
|
|
|
if (event->header.type == PERF_RECORD_SAMPLE &&
|
|
|
|
sample->raw_size) {
|
|
|
|
/* Handle event with raw data */
|
|
|
|
ev_bc000 = perf_evlist__event2evsel(session->evlist, event);
|
|
|
|
if (ev_bc000 &&
|
2019-07-21 18:24:29 +07:00
|
|
|
ev_bc000->core.attr.config == PERF_EVENT_CPUM_CF_DIAG)
|
2019-01-17 16:30:03 +07:00
|
|
|
err = s390_cpumcf_dumpctr(sf, sample);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2018-08-02 14:46:22 +07:00
|
|
|
if (event->header.type == PERF_RECORD_AUX &&
|
|
|
|
event->aux.flags & PERF_AUX_FLAG_TRUNCATED)
|
|
|
|
return s390_cpumsf_lost(sf, sample);
|
|
|
|
|
|
|
|
if (timestamp) {
|
|
|
|
err = s390_cpumsf_update_queues(sf, timestamp);
|
|
|
|
if (!err)
|
|
|
|
err = s390_cpumsf_process_queues(sf, timestamp);
|
|
|
|
}
|
|
|
|
return err;
|
perf auxtrace: Support for perf report -D for s390
Add initial support for s390 auxiliary traces using the CPU-Measurement
Sampling Facility.
Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data
file. Later patches will show the contents of the auxiliary traces.
Setup the auxtrace queues and data structures for s390. A raw dump of
the perf.data file now does not show an error when an auxtrace event is
encountered.
Output before:
[root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace
0x128 [0x10]: failed to process type: 70
Error:
failed to process sample
0x128 [0x10]: event: 70
.
. ... raw event: size 16 bytes
. 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............
0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0
[root@s35lp76 perf]#
Output after:
# ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE
0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
....
Additional notes about the underlying hardware and software
implementation, provided by Hendrik Brueckner (see Link: below).
=============================================================================
The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain
performance information on the mainframe. Basically, it was introduced
with System z10 years ago for the z/Architecture, that means, 64-bit.
For Linux, there are two facilities of interest, counter facility and sampling
facility. The counter facility provides hardware counters for instructions,
cycles, crypto-activities, and many more.
The sampling facility is a hardware sampler that when started will write
samples at a particular interval into a sampling buffer. At some point,
for example, if a sample block is full, it generates an interrupt to collect
samples (while the sampler continues to run).
Few years ago, I started to provide the a perf PMU to use the counter
and sampling facilities. Recently, the device driver was updated to also
"export" the sampling buffer into the AUX area. Thomas now completed the
related perf work to interpret and process these AUX data.
If people are more interested in the sampling facility, they can have a
look into:
- The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05
http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a
and to learn how-to use it for Linux on Z, have look at chapter 54,
"Using the CPU-measurement facilities" in the:
- Device Drivers, Features, and Commands, SC33-8411-34
http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf
=============================================================================
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-02 14:46:20 +07:00
|
|
|
}
|
|
|
|
|
2018-08-02 14:46:22 +07:00
|
|
|
struct s390_cpumsf_synth {
|
|
|
|
struct perf_tool cpumsf_tool;
|
|
|
|
struct perf_session *session;
|
|
|
|
};
|
|
|
|
|
perf auxtrace: Support for perf report -D for s390
Add initial support for s390 auxiliary traces using the CPU-Measurement
Sampling Facility.
Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data
file. Later patches will show the contents of the auxiliary traces.
Setup the auxtrace queues and data structures for s390. A raw dump of
the perf.data file now does not show an error when an auxtrace event is
encountered.
Output before:
[root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace
0x128 [0x10]: failed to process type: 70
Error:
failed to process sample
0x128 [0x10]: event: 70
.
. ... raw event: size 16 bytes
. 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............
0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0
[root@s35lp76 perf]#
Output after:
# ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE
0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
....
Additional notes about the underlying hardware and software
implementation, provided by Hendrik Brueckner (see Link: below).
=============================================================================
The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain
performance information on the mainframe. Basically, it was introduced
with System z10 years ago for the z/Architecture, that means, 64-bit.
For Linux, there are two facilities of interest, counter facility and sampling
facility. The counter facility provides hardware counters for instructions,
cycles, crypto-activities, and many more.
The sampling facility is a hardware sampler that when started will write
samples at a particular interval into a sampling buffer. At some point,
for example, if a sample block is full, it generates an interrupt to collect
samples (while the sampler continues to run).
Few years ago, I started to provide the a perf PMU to use the counter
and sampling facilities. Recently, the device driver was updated to also
"export" the sampling buffer into the AUX area. Thomas now completed the
related perf work to interpret and process these AUX data.
If people are more interested in the sampling facility, they can have a
look into:
- The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05
http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a
and to learn how-to use it for Linux on Z, have look at chapter 54,
"Using the CPU-measurement facilities" in the:
- Device Drivers, Features, and Commands, SC33-8411-34
http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf
=============================================================================
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-02 14:46:20 +07:00
|
|
|
static int
|
2018-08-02 14:46:21 +07:00
|
|
|
s390_cpumsf_process_auxtrace_event(struct perf_session *session,
|
perf auxtrace: Support for perf report -D for s390
Add initial support for s390 auxiliary traces using the CPU-Measurement
Sampling Facility.
Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data
file. Later patches will show the contents of the auxiliary traces.
Setup the auxtrace queues and data structures for s390. A raw dump of
the perf.data file now does not show an error when an auxtrace event is
encountered.
Output before:
[root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace
0x128 [0x10]: failed to process type: 70
Error:
failed to process sample
0x128 [0x10]: event: 70
.
. ... raw event: size 16 bytes
. 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............
0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0
[root@s35lp76 perf]#
Output after:
# ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE
0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
....
Additional notes about the underlying hardware and software
implementation, provided by Hendrik Brueckner (see Link: below).
=============================================================================
The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain
performance information on the mainframe. Basically, it was introduced
with System z10 years ago for the z/Architecture, that means, 64-bit.
For Linux, there are two facilities of interest, counter facility and sampling
facility. The counter facility provides hardware counters for instructions,
cycles, crypto-activities, and many more.
The sampling facility is a hardware sampler that when started will write
samples at a particular interval into a sampling buffer. At some point,
for example, if a sample block is full, it generates an interrupt to collect
samples (while the sampler continues to run).
Few years ago, I started to provide the a perf PMU to use the counter
and sampling facilities. Recently, the device driver was updated to also
"export" the sampling buffer into the AUX area. Thomas now completed the
related perf work to interpret and process these AUX data.
If people are more interested in the sampling facility, they can have a
look into:
- The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05
http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a
and to learn how-to use it for Linux on Z, have look at chapter 54,
"Using the CPU-measurement facilities" in the:
- Device Drivers, Features, and Commands, SC33-8411-34
http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf
=============================================================================
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-02 14:46:20 +07:00
|
|
|
union perf_event *event __maybe_unused,
|
|
|
|
struct perf_tool *tool __maybe_unused)
|
|
|
|
{
|
2018-08-02 14:46:21 +07:00
|
|
|
struct s390_cpumsf *sf = container_of(session->auxtrace,
|
|
|
|
struct s390_cpumsf,
|
|
|
|
auxtrace);
|
|
|
|
|
|
|
|
int fd = perf_data__fd(session->data);
|
|
|
|
struct auxtrace_buffer *buffer;
|
|
|
|
off_t data_offset;
|
|
|
|
int err;
|
|
|
|
|
2018-08-02 14:46:22 +07:00
|
|
|
if (sf->data_queued)
|
|
|
|
return 0;
|
|
|
|
|
2018-08-02 14:46:21 +07:00
|
|
|
if (perf_data__is_pipe(session->data)) {
|
|
|
|
data_offset = 0;
|
|
|
|
} else {
|
|
|
|
data_offset = lseek(fd, 0, SEEK_CUR);
|
|
|
|
if (data_offset == -1)
|
|
|
|
return -errno;
|
|
|
|
}
|
|
|
|
|
|
|
|
err = auxtrace_queues__add_event(&sf->queues, session, event,
|
|
|
|
data_offset, &buffer);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
/* Dump here after copying piped trace out of the pipe */
|
|
|
|
if (dump_trace) {
|
|
|
|
if (auxtrace_buffer__get_data(buffer, fd)) {
|
|
|
|
s390_cpumsf_dump_event(sf, buffer->data,
|
|
|
|
buffer->size);
|
|
|
|
auxtrace_buffer__put_data(buffer);
|
|
|
|
}
|
|
|
|
}
|
perf auxtrace: Support for perf report -D for s390
Add initial support for s390 auxiliary traces using the CPU-Measurement
Sampling Facility.
Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data
file. Later patches will show the contents of the auxiliary traces.
Setup the auxtrace queues and data structures for s390. A raw dump of
the perf.data file now does not show an error when an auxtrace event is
encountered.
Output before:
[root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace
0x128 [0x10]: failed to process type: 70
Error:
failed to process sample
0x128 [0x10]: event: 70
.
. ... raw event: size 16 bytes
. 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............
0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0
[root@s35lp76 perf]#
Output after:
# ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE
0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
....
Additional notes about the underlying hardware and software
implementation, provided by Hendrik Brueckner (see Link: below).
=============================================================================
The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain
performance information on the mainframe. Basically, it was introduced
with System z10 years ago for the z/Architecture, that means, 64-bit.
For Linux, there are two facilities of interest, counter facility and sampling
facility. The counter facility provides hardware counters for instructions,
cycles, crypto-activities, and many more.
The sampling facility is a hardware sampler that when started will write
samples at a particular interval into a sampling buffer. At some point,
for example, if a sample block is full, it generates an interrupt to collect
samples (while the sampler continues to run).
Few years ago, I started to provide the a perf PMU to use the counter
and sampling facilities. Recently, the device driver was updated to also
"export" the sampling buffer into the AUX area. Thomas now completed the
related perf work to interpret and process these AUX data.
If people are more interested in the sampling facility, they can have a
look into:
- The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05
http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a
and to learn how-to use it for Linux on Z, have look at chapter 54,
"Using the CPU-measurement facilities" in the:
- Device Drivers, Features, and Commands, SC33-8411-34
http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf
=============================================================================
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-02 14:46:20 +07:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-08-02 14:46:22 +07:00
|
|
|
static void s390_cpumsf_free_events(struct perf_session *session __maybe_unused)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
perf auxtrace: Support for perf report -D for s390
Add initial support for s390 auxiliary traces using the CPU-Measurement
Sampling Facility.
Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data
file. Later patches will show the contents of the auxiliary traces.
Setup the auxtrace queues and data structures for s390. A raw dump of
the perf.data file now does not show an error when an auxtrace event is
encountered.
Output before:
[root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace
0x128 [0x10]: failed to process type: 70
Error:
failed to process sample
0x128 [0x10]: event: 70
.
. ... raw event: size 16 bytes
. 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............
0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0
[root@s35lp76 perf]#
Output after:
# ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE
0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
....
Additional notes about the underlying hardware and software
implementation, provided by Hendrik Brueckner (see Link: below).
=============================================================================
The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain
performance information on the mainframe. Basically, it was introduced
with System z10 years ago for the z/Architecture, that means, 64-bit.
For Linux, there are two facilities of interest, counter facility and sampling
facility. The counter facility provides hardware counters for instructions,
cycles, crypto-activities, and many more.
The sampling facility is a hardware sampler that when started will write
samples at a particular interval into a sampling buffer. At some point,
for example, if a sample block is full, it generates an interrupt to collect
samples (while the sampler continues to run).
Few years ago, I started to provide the a perf PMU to use the counter
and sampling facilities. Recently, the device driver was updated to also
"export" the sampling buffer into the AUX area. Thomas now completed the
related perf work to interpret and process these AUX data.
If people are more interested in the sampling facility, they can have a
look into:
- The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05
http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a
and to learn how-to use it for Linux on Z, have look at chapter 54,
"Using the CPU-measurement facilities" in the:
- Device Drivers, Features, and Commands, SC33-8411-34
http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf
=============================================================================
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-02 14:46:20 +07:00
|
|
|
static int s390_cpumsf_flush(struct perf_session *session __maybe_unused,
|
|
|
|
struct perf_tool *tool __maybe_unused)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-08-02 14:46:22 +07:00
|
|
|
static void s390_cpumsf_free_queues(struct perf_session *session)
|
perf auxtrace: Support for perf report -D for s390
Add initial support for s390 auxiliary traces using the CPU-Measurement
Sampling Facility.
Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data
file. Later patches will show the contents of the auxiliary traces.
Setup the auxtrace queues and data structures for s390. A raw dump of
the perf.data file now does not show an error when an auxtrace event is
encountered.
Output before:
[root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace
0x128 [0x10]: failed to process type: 70
Error:
failed to process sample
0x128 [0x10]: event: 70
.
. ... raw event: size 16 bytes
. 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............
0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0
[root@s35lp76 perf]#
Output after:
# ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE
0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
....
Additional notes about the underlying hardware and software
implementation, provided by Hendrik Brueckner (see Link: below).
=============================================================================
The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain
performance information on the mainframe. Basically, it was introduced
with System z10 years ago for the z/Architecture, that means, 64-bit.
For Linux, there are two facilities of interest, counter facility and sampling
facility. The counter facility provides hardware counters for instructions,
cycles, crypto-activities, and many more.
The sampling facility is a hardware sampler that when started will write
samples at a particular interval into a sampling buffer. At some point,
for example, if a sample block is full, it generates an interrupt to collect
samples (while the sampler continues to run).
Few years ago, I started to provide the a perf PMU to use the counter
and sampling facilities. Recently, the device driver was updated to also
"export" the sampling buffer into the AUX area. Thomas now completed the
related perf work to interpret and process these AUX data.
If people are more interested in the sampling facility, they can have a
look into:
- The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05
http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a
and to learn how-to use it for Linux on Z, have look at chapter 54,
"Using the CPU-measurement facilities" in the:
- Device Drivers, Features, and Commands, SC33-8411-34
http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf
=============================================================================
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-02 14:46:20 +07:00
|
|
|
{
|
|
|
|
struct s390_cpumsf *sf = container_of(session->auxtrace,
|
|
|
|
struct s390_cpumsf,
|
2018-08-02 14:46:22 +07:00
|
|
|
auxtrace);
|
perf auxtrace: Support for perf report -D for s390
Add initial support for s390 auxiliary traces using the CPU-Measurement
Sampling Facility.
Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data
file. Later patches will show the contents of the auxiliary traces.
Setup the auxtrace queues and data structures for s390. A raw dump of
the perf.data file now does not show an error when an auxtrace event is
encountered.
Output before:
[root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace
0x128 [0x10]: failed to process type: 70
Error:
failed to process sample
0x128 [0x10]: event: 70
.
. ... raw event: size 16 bytes
. 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............
0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0
[root@s35lp76 perf]#
Output after:
# ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE
0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
....
Additional notes about the underlying hardware and software
implementation, provided by Hendrik Brueckner (see Link: below).
=============================================================================
The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain
performance information on the mainframe. Basically, it was introduced
with System z10 years ago for the z/Architecture, that means, 64-bit.
For Linux, there are two facilities of interest, counter facility and sampling
facility. The counter facility provides hardware counters for instructions,
cycles, crypto-activities, and many more.
The sampling facility is a hardware sampler that when started will write
samples at a particular interval into a sampling buffer. At some point,
for example, if a sample block is full, it generates an interrupt to collect
samples (while the sampler continues to run).
Few years ago, I started to provide the a perf PMU to use the counter
and sampling facilities. Recently, the device driver was updated to also
"export" the sampling buffer into the AUX area. Thomas now completed the
related perf work to interpret and process these AUX data.
If people are more interested in the sampling facility, they can have a
look into:
- The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05
http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a
and to learn how-to use it for Linux on Z, have look at chapter 54,
"Using the CPU-measurement facilities" in the:
- Device Drivers, Features, and Commands, SC33-8411-34
http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf
=============================================================================
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-02 14:46:20 +07:00
|
|
|
struct auxtrace_queues *queues = &sf->queues;
|
|
|
|
unsigned int i;
|
|
|
|
|
2018-08-09 11:56:50 +07:00
|
|
|
for (i = 0; i < queues->nr_queues; i++) {
|
|
|
|
struct s390_cpumsf_queue *sfq = (struct s390_cpumsf_queue *)
|
|
|
|
queues->queue_array[i].priv;
|
|
|
|
|
2019-01-17 16:30:03 +07:00
|
|
|
if (sfq != NULL) {
|
|
|
|
if (sfq->logfile) {
|
|
|
|
fclose(sfq->logfile);
|
|
|
|
sfq->logfile = NULL;
|
|
|
|
}
|
|
|
|
if (sfq->logfile_ctr) {
|
|
|
|
fclose(sfq->logfile_ctr);
|
|
|
|
sfq->logfile_ctr = NULL;
|
|
|
|
}
|
2018-08-09 11:56:50 +07:00
|
|
|
}
|
perf auxtrace: Support for perf report -D for s390
Add initial support for s390 auxiliary traces using the CPU-Measurement
Sampling Facility.
Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data
file. Later patches will show the contents of the auxiliary traces.
Setup the auxtrace queues and data structures for s390. A raw dump of
the perf.data file now does not show an error when an auxtrace event is
encountered.
Output before:
[root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace
0x128 [0x10]: failed to process type: 70
Error:
failed to process sample
0x128 [0x10]: event: 70
.
. ... raw event: size 16 bytes
. 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............
0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0
[root@s35lp76 perf]#
Output after:
# ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE
0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
....
Additional notes about the underlying hardware and software
implementation, provided by Hendrik Brueckner (see Link: below).
=============================================================================
The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain
performance information on the mainframe. Basically, it was introduced
with System z10 years ago for the z/Architecture, that means, 64-bit.
For Linux, there are two facilities of interest, counter facility and sampling
facility. The counter facility provides hardware counters for instructions,
cycles, crypto-activities, and many more.
The sampling facility is a hardware sampler that when started will write
samples at a particular interval into a sampling buffer. At some point,
for example, if a sample block is full, it generates an interrupt to collect
samples (while the sampler continues to run).
Few years ago, I started to provide the a perf PMU to use the counter
and sampling facilities. Recently, the device driver was updated to also
"export" the sampling buffer into the AUX area. Thomas now completed the
related perf work to interpret and process these AUX data.
If people are more interested in the sampling facility, they can have a
look into:
- The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05
http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a
and to learn how-to use it for Linux on Z, have look at chapter 54,
"Using the CPU-measurement facilities" in the:
- Device Drivers, Features, and Commands, SC33-8411-34
http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf
=============================================================================
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-02 14:46:20 +07:00
|
|
|
zfree(&queues->queue_array[i].priv);
|
2018-08-09 11:56:50 +07:00
|
|
|
}
|
perf auxtrace: Support for perf report -D for s390
Add initial support for s390 auxiliary traces using the CPU-Measurement
Sampling Facility.
Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data
file. Later patches will show the contents of the auxiliary traces.
Setup the auxtrace queues and data structures for s390. A raw dump of
the perf.data file now does not show an error when an auxtrace event is
encountered.
Output before:
[root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace
0x128 [0x10]: failed to process type: 70
Error:
failed to process sample
0x128 [0x10]: event: 70
.
. ... raw event: size 16 bytes
. 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............
0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0
[root@s35lp76 perf]#
Output after:
# ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE
0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
....
Additional notes about the underlying hardware and software
implementation, provided by Hendrik Brueckner (see Link: below).
=============================================================================
The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain
performance information on the mainframe. Basically, it was introduced
with System z10 years ago for the z/Architecture, that means, 64-bit.
For Linux, there are two facilities of interest, counter facility and sampling
facility. The counter facility provides hardware counters for instructions,
cycles, crypto-activities, and many more.
The sampling facility is a hardware sampler that when started will write
samples at a particular interval into a sampling buffer. At some point,
for example, if a sample block is full, it generates an interrupt to collect
samples (while the sampler continues to run).
Few years ago, I started to provide the a perf PMU to use the counter
and sampling facilities. Recently, the device driver was updated to also
"export" the sampling buffer into the AUX area. Thomas now completed the
related perf work to interpret and process these AUX data.
If people are more interested in the sampling facility, they can have a
look into:
- The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05
http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a
and to learn how-to use it for Linux on Z, have look at chapter 54,
"Using the CPU-measurement facilities" in the:
- Device Drivers, Features, and Commands, SC33-8411-34
http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf
=============================================================================
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-02 14:46:20 +07:00
|
|
|
auxtrace_queues__free(queues);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void s390_cpumsf_free(struct perf_session *session)
|
|
|
|
{
|
|
|
|
struct s390_cpumsf *sf = container_of(session->auxtrace,
|
|
|
|
struct s390_cpumsf,
|
|
|
|
auxtrace);
|
|
|
|
|
|
|
|
auxtrace_heap__free(&sf->heap);
|
2018-08-02 14:46:22 +07:00
|
|
|
s390_cpumsf_free_queues(session);
|
perf auxtrace: Support for perf report -D for s390
Add initial support for s390 auxiliary traces using the CPU-Measurement
Sampling Facility.
Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data
file. Later patches will show the contents of the auxiliary traces.
Setup the auxtrace queues and data structures for s390. A raw dump of
the perf.data file now does not show an error when an auxtrace event is
encountered.
Output before:
[root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace
0x128 [0x10]: failed to process type: 70
Error:
failed to process sample
0x128 [0x10]: event: 70
.
. ... raw event: size 16 bytes
. 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............
0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0
[root@s35lp76 perf]#
Output after:
# ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE
0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
....
Additional notes about the underlying hardware and software
implementation, provided by Hendrik Brueckner (see Link: below).
=============================================================================
The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain
performance information on the mainframe. Basically, it was introduced
with System z10 years ago for the z/Architecture, that means, 64-bit.
For Linux, there are two facilities of interest, counter facility and sampling
facility. The counter facility provides hardware counters for instructions,
cycles, crypto-activities, and many more.
The sampling facility is a hardware sampler that when started will write
samples at a particular interval into a sampling buffer. At some point,
for example, if a sample block is full, it generates an interrupt to collect
samples (while the sampler continues to run).
Few years ago, I started to provide the a perf PMU to use the counter
and sampling facilities. Recently, the device driver was updated to also
"export" the sampling buffer into the AUX area. Thomas now completed the
related perf work to interpret and process these AUX data.
If people are more interested in the sampling facility, they can have a
look into:
- The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05
http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a
and to learn how-to use it for Linux on Z, have look at chapter 54,
"Using the CPU-measurement facilities" in the:
- Device Drivers, Features, and Commands, SC33-8411-34
http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf
=============================================================================
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-02 14:46:20 +07:00
|
|
|
session->auxtrace = NULL;
|
2019-07-04 22:06:20 +07:00
|
|
|
zfree(&sf->logdir);
|
perf auxtrace: Support for perf report -D for s390
Add initial support for s390 auxiliary traces using the CPU-Measurement
Sampling Facility.
Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data
file. Later patches will show the contents of the auxiliary traces.
Setup the auxtrace queues and data structures for s390. A raw dump of
the perf.data file now does not show an error when an auxtrace event is
encountered.
Output before:
[root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace
0x128 [0x10]: failed to process type: 70
Error:
failed to process sample
0x128 [0x10]: event: 70
.
. ... raw event: size 16 bytes
. 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............
0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0
[root@s35lp76 perf]#
Output after:
# ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE
0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
....
Additional notes about the underlying hardware and software
implementation, provided by Hendrik Brueckner (see Link: below).
=============================================================================
The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain
performance information on the mainframe. Basically, it was introduced
with System z10 years ago for the z/Architecture, that means, 64-bit.
For Linux, there are two facilities of interest, counter facility and sampling
facility. The counter facility provides hardware counters for instructions,
cycles, crypto-activities, and many more.
The sampling facility is a hardware sampler that when started will write
samples at a particular interval into a sampling buffer. At some point,
for example, if a sample block is full, it generates an interrupt to collect
samples (while the sampler continues to run).
Few years ago, I started to provide the a perf PMU to use the counter
and sampling facilities. Recently, the device driver was updated to also
"export" the sampling buffer into the AUX area. Thomas now completed the
related perf work to interpret and process these AUX data.
If people are more interested in the sampling facility, they can have a
look into:
- The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05
http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a
and to learn how-to use it for Linux on Z, have look at chapter 54,
"Using the CPU-measurement facilities" in the:
- Device Drivers, Features, and Commands, SC33-8411-34
http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf
=============================================================================
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-02 14:46:20 +07:00
|
|
|
free(sf);
|
|
|
|
}
|
|
|
|
|
2018-08-02 14:46:21 +07:00
|
|
|
static int s390_cpumsf_get_type(const char *cpuid)
|
|
|
|
{
|
|
|
|
int ret, family = 0;
|
|
|
|
|
|
|
|
ret = sscanf(cpuid, "%*[^,],%u", &family);
|
|
|
|
return (ret == 1) ? family : 0;
|
|
|
|
}
|
|
|
|
|
2018-08-02 14:46:22 +07:00
|
|
|
/* Check itrace options set on perf report command.
|
|
|
|
* Return true, if none are set or all options specified can be
|
2018-08-09 11:56:50 +07:00
|
|
|
* handled on s390 (currently only option 'd' for logging.
|
2018-08-02 14:46:22 +07:00
|
|
|
* Return false otherwise.
|
|
|
|
*/
|
|
|
|
static bool check_auxtrace_itrace(struct itrace_synth_opts *itops)
|
|
|
|
{
|
2018-08-09 11:56:50 +07:00
|
|
|
bool ison = false;
|
|
|
|
|
2018-08-02 14:46:22 +07:00
|
|
|
if (!itops || !itops->set)
|
|
|
|
return true;
|
2018-08-09 11:56:50 +07:00
|
|
|
ison = itops->inject || itops->instructions || itops->branches ||
|
|
|
|
itops->transactions || itops->ptwrites ||
|
|
|
|
itops->pwr_events || itops->errors ||
|
|
|
|
itops->dont_decode || itops->calls || itops->returns ||
|
|
|
|
itops->callchain || itops->thread_stack ||
|
|
|
|
itops->last_branch;
|
|
|
|
if (!ison)
|
|
|
|
return true;
|
|
|
|
pr_err("Unsupported --itrace options specified\n");
|
2018-08-02 14:46:22 +07:00
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
2018-08-09 11:56:50 +07:00
|
|
|
/* Check for AUXTRACE dump directory if it is needed.
|
|
|
|
* On failure print an error message but continue.
|
|
|
|
* Return 0 on wrong keyword in config file and 1 otherwise.
|
|
|
|
*/
|
|
|
|
static int s390_cpumsf__config(const char *var, const char *value, void *cb)
|
|
|
|
{
|
|
|
|
struct s390_cpumsf *sf = cb;
|
|
|
|
struct stat stbuf;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
if (strcmp(var, "auxtrace.dumpdir"))
|
|
|
|
return 0;
|
|
|
|
sf->logdir = strdup(value);
|
|
|
|
if (sf->logdir == NULL) {
|
|
|
|
pr_err("Failed to find auxtrace log directory %s,"
|
|
|
|
" continue with current directory...\n", value);
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
rc = stat(sf->logdir, &stbuf);
|
|
|
|
if (rc == -1 || !S_ISDIR(stbuf.st_mode)) {
|
|
|
|
pr_err("Missing auxtrace log directory %s,"
|
|
|
|
" continue with current directory...\n", value);
|
2019-07-04 22:06:20 +07:00
|
|
|
zfree(&sf->logdir);
|
2018-08-09 11:56:50 +07:00
|
|
|
}
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
perf auxtrace: Support for perf report -D for s390
Add initial support for s390 auxiliary traces using the CPU-Measurement
Sampling Facility.
Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data
file. Later patches will show the contents of the auxiliary traces.
Setup the auxtrace queues and data structures for s390. A raw dump of
the perf.data file now does not show an error when an auxtrace event is
encountered.
Output before:
[root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace
0x128 [0x10]: failed to process type: 70
Error:
failed to process sample
0x128 [0x10]: event: 70
.
. ... raw event: size 16 bytes
. 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............
0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0
[root@s35lp76 perf]#
Output after:
# ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE
0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
....
Additional notes about the underlying hardware and software
implementation, provided by Hendrik Brueckner (see Link: below).
=============================================================================
The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain
performance information on the mainframe. Basically, it was introduced
with System z10 years ago for the z/Architecture, that means, 64-bit.
For Linux, there are two facilities of interest, counter facility and sampling
facility. The counter facility provides hardware counters for instructions,
cycles, crypto-activities, and many more.
The sampling facility is a hardware sampler that when started will write
samples at a particular interval into a sampling buffer. At some point,
for example, if a sample block is full, it generates an interrupt to collect
samples (while the sampler continues to run).
Few years ago, I started to provide the a perf PMU to use the counter
and sampling facilities. Recently, the device driver was updated to also
"export" the sampling buffer into the AUX area. Thomas now completed the
related perf work to interpret and process these AUX data.
If people are more interested in the sampling facility, they can have a
look into:
- The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05
http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a
and to learn how-to use it for Linux on Z, have look at chapter 54,
"Using the CPU-measurement facilities" in the:
- Device Drivers, Features, and Commands, SC33-8411-34
http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf
=============================================================================
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-02 14:46:20 +07:00
|
|
|
int s390_cpumsf_process_auxtrace_info(union perf_event *event,
|
|
|
|
struct perf_session *session)
|
|
|
|
{
|
2019-08-28 20:57:16 +07:00
|
|
|
struct perf_record_auxtrace_info *auxtrace_info = &event->auxtrace_info;
|
perf auxtrace: Support for perf report -D for s390
Add initial support for s390 auxiliary traces using the CPU-Measurement
Sampling Facility.
Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data
file. Later patches will show the contents of the auxiliary traces.
Setup the auxtrace queues and data structures for s390. A raw dump of
the perf.data file now does not show an error when an auxtrace event is
encountered.
Output before:
[root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace
0x128 [0x10]: failed to process type: 70
Error:
failed to process sample
0x128 [0x10]: event: 70
.
. ... raw event: size 16 bytes
. 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............
0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0
[root@s35lp76 perf]#
Output after:
# ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE
0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
....
Additional notes about the underlying hardware and software
implementation, provided by Hendrik Brueckner (see Link: below).
=============================================================================
The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain
performance information on the mainframe. Basically, it was introduced
with System z10 years ago for the z/Architecture, that means, 64-bit.
For Linux, there are two facilities of interest, counter facility and sampling
facility. The counter facility provides hardware counters for instructions,
cycles, crypto-activities, and many more.
The sampling facility is a hardware sampler that when started will write
samples at a particular interval into a sampling buffer. At some point,
for example, if a sample block is full, it generates an interrupt to collect
samples (while the sampler continues to run).
Few years ago, I started to provide the a perf PMU to use the counter
and sampling facilities. Recently, the device driver was updated to also
"export" the sampling buffer into the AUX area. Thomas now completed the
related perf work to interpret and process these AUX data.
If people are more interested in the sampling facility, they can have a
look into:
- The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05
http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a
and to learn how-to use it for Linux on Z, have look at chapter 54,
"Using the CPU-measurement facilities" in the:
- Device Drivers, Features, and Commands, SC33-8411-34
http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf
=============================================================================
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-02 14:46:20 +07:00
|
|
|
struct s390_cpumsf *sf;
|
|
|
|
int err;
|
|
|
|
|
2019-08-28 20:57:16 +07:00
|
|
|
if (auxtrace_info->header.size < sizeof(struct perf_record_auxtrace_info))
|
perf auxtrace: Support for perf report -D for s390
Add initial support for s390 auxiliary traces using the CPU-Measurement
Sampling Facility.
Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data
file. Later patches will show the contents of the auxiliary traces.
Setup the auxtrace queues and data structures for s390. A raw dump of
the perf.data file now does not show an error when an auxtrace event is
encountered.
Output before:
[root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace
0x128 [0x10]: failed to process type: 70
Error:
failed to process sample
0x128 [0x10]: event: 70
.
. ... raw event: size 16 bytes
. 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............
0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0
[root@s35lp76 perf]#
Output after:
# ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE
0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
....
Additional notes about the underlying hardware and software
implementation, provided by Hendrik Brueckner (see Link: below).
=============================================================================
The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain
performance information on the mainframe. Basically, it was introduced
with System z10 years ago for the z/Architecture, that means, 64-bit.
For Linux, there are two facilities of interest, counter facility and sampling
facility. The counter facility provides hardware counters for instructions,
cycles, crypto-activities, and many more.
The sampling facility is a hardware sampler that when started will write
samples at a particular interval into a sampling buffer. At some point,
for example, if a sample block is full, it generates an interrupt to collect
samples (while the sampler continues to run).
Few years ago, I started to provide the a perf PMU to use the counter
and sampling facilities. Recently, the device driver was updated to also
"export" the sampling buffer into the AUX area. Thomas now completed the
related perf work to interpret and process these AUX data.
If people are more interested in the sampling facility, they can have a
look into:
- The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05
http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a
and to learn how-to use it for Linux on Z, have look at chapter 54,
"Using the CPU-measurement facilities" in the:
- Device Drivers, Features, and Commands, SC33-8411-34
http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf
=============================================================================
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-02 14:46:20 +07:00
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
sf = zalloc(sizeof(struct s390_cpumsf));
|
|
|
|
if (sf == NULL)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
2018-08-02 14:46:22 +07:00
|
|
|
if (!check_auxtrace_itrace(session->itrace_synth_opts)) {
|
|
|
|
err = -EINVAL;
|
|
|
|
goto err_free;
|
|
|
|
}
|
2018-08-09 11:56:50 +07:00
|
|
|
sf->use_logfile = session->itrace_synth_opts->log;
|
|
|
|
if (sf->use_logfile)
|
|
|
|
perf_config(s390_cpumsf__config, sf);
|
2018-08-02 14:46:22 +07:00
|
|
|
|
perf auxtrace: Support for perf report -D for s390
Add initial support for s390 auxiliary traces using the CPU-Measurement
Sampling Facility.
Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data
file. Later patches will show the contents of the auxiliary traces.
Setup the auxtrace queues and data structures for s390. A raw dump of
the perf.data file now does not show an error when an auxtrace event is
encountered.
Output before:
[root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace
0x128 [0x10]: failed to process type: 70
Error:
failed to process sample
0x128 [0x10]: event: 70
.
. ... raw event: size 16 bytes
. 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............
0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0
[root@s35lp76 perf]#
Output after:
# ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE
0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
....
Additional notes about the underlying hardware and software
implementation, provided by Hendrik Brueckner (see Link: below).
=============================================================================
The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain
performance information on the mainframe. Basically, it was introduced
with System z10 years ago for the z/Architecture, that means, 64-bit.
For Linux, there are two facilities of interest, counter facility and sampling
facility. The counter facility provides hardware counters for instructions,
cycles, crypto-activities, and many more.
The sampling facility is a hardware sampler that when started will write
samples at a particular interval into a sampling buffer. At some point,
for example, if a sample block is full, it generates an interrupt to collect
samples (while the sampler continues to run).
Few years ago, I started to provide the a perf PMU to use the counter
and sampling facilities. Recently, the device driver was updated to also
"export" the sampling buffer into the AUX area. Thomas now completed the
related perf work to interpret and process these AUX data.
If people are more interested in the sampling facility, they can have a
look into:
- The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05
http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a
and to learn how-to use it for Linux on Z, have look at chapter 54,
"Using the CPU-measurement facilities" in the:
- Device Drivers, Features, and Commands, SC33-8411-34
http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf
=============================================================================
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-02 14:46:20 +07:00
|
|
|
err = auxtrace_queues__init(&sf->queues);
|
|
|
|
if (err)
|
|
|
|
goto err_free;
|
|
|
|
|
|
|
|
sf->session = session;
|
|
|
|
sf->machine = &session->machines.host; /* No kvm support */
|
|
|
|
sf->auxtrace_type = auxtrace_info->type;
|
|
|
|
sf->pmu_type = PERF_TYPE_RAW;
|
2018-08-02 14:46:21 +07:00
|
|
|
sf->machine_type = s390_cpumsf_get_type(session->evlist->env->cpuid);
|
perf auxtrace: Support for perf report -D for s390
Add initial support for s390 auxiliary traces using the CPU-Measurement
Sampling Facility.
Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data
file. Later patches will show the contents of the auxiliary traces.
Setup the auxtrace queues and data structures for s390. A raw dump of
the perf.data file now does not show an error when an auxtrace event is
encountered.
Output before:
[root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace
0x128 [0x10]: failed to process type: 70
Error:
failed to process sample
0x128 [0x10]: event: 70
.
. ... raw event: size 16 bytes
. 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............
0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0
[root@s35lp76 perf]#
Output after:
# ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE
0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
....
Additional notes about the underlying hardware and software
implementation, provided by Hendrik Brueckner (see Link: below).
=============================================================================
The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain
performance information on the mainframe. Basically, it was introduced
with System z10 years ago for the z/Architecture, that means, 64-bit.
For Linux, there are two facilities of interest, counter facility and sampling
facility. The counter facility provides hardware counters for instructions,
cycles, crypto-activities, and many more.
The sampling facility is a hardware sampler that when started will write
samples at a particular interval into a sampling buffer. At some point,
for example, if a sample block is full, it generates an interrupt to collect
samples (while the sampler continues to run).
Few years ago, I started to provide the a perf PMU to use the counter
and sampling facilities. Recently, the device driver was updated to also
"export" the sampling buffer into the AUX area. Thomas now completed the
related perf work to interpret and process these AUX data.
If people are more interested in the sampling facility, they can have a
look into:
- The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05
http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a
and to learn how-to use it for Linux on Z, have look at chapter 54,
"Using the CPU-measurement facilities" in the:
- Device Drivers, Features, and Commands, SC33-8411-34
http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf
=============================================================================
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-02 14:46:20 +07:00
|
|
|
|
|
|
|
sf->auxtrace.process_event = s390_cpumsf_process_event;
|
|
|
|
sf->auxtrace.process_auxtrace_event = s390_cpumsf_process_auxtrace_event;
|
|
|
|
sf->auxtrace.flush_events = s390_cpumsf_flush;
|
|
|
|
sf->auxtrace.free_events = s390_cpumsf_free_events;
|
|
|
|
sf->auxtrace.free = s390_cpumsf_free;
|
|
|
|
session->auxtrace = &sf->auxtrace;
|
|
|
|
|
2018-08-02 14:46:22 +07:00
|
|
|
if (dump_trace)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
err = auxtrace_queues__process_index(&sf->queues, session);
|
|
|
|
if (err)
|
|
|
|
goto err_free_queues;
|
|
|
|
|
|
|
|
if (sf->queues.populated)
|
|
|
|
sf->data_queued = true;
|
|
|
|
|
perf auxtrace: Support for perf report -D for s390
Add initial support for s390 auxiliary traces using the CPU-Measurement
Sampling Facility.
Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data
file. Later patches will show the contents of the auxiliary traces.
Setup the auxtrace queues and data structures for s390. A raw dump of
the perf.data file now does not show an error when an auxtrace event is
encountered.
Output before:
[root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace
0x128 [0x10]: failed to process type: 70
Error:
failed to process sample
0x128 [0x10]: event: 70
.
. ... raw event: size 16 bytes
. 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............
0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0
[root@s35lp76 perf]#
Output after:
# ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE
0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
....
Additional notes about the underlying hardware and software
implementation, provided by Hendrik Brueckner (see Link: below).
=============================================================================
The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain
performance information on the mainframe. Basically, it was introduced
with System z10 years ago for the z/Architecture, that means, 64-bit.
For Linux, there are two facilities of interest, counter facility and sampling
facility. The counter facility provides hardware counters for instructions,
cycles, crypto-activities, and many more.
The sampling facility is a hardware sampler that when started will write
samples at a particular interval into a sampling buffer. At some point,
for example, if a sample block is full, it generates an interrupt to collect
samples (while the sampler continues to run).
Few years ago, I started to provide the a perf PMU to use the counter
and sampling facilities. Recently, the device driver was updated to also
"export" the sampling buffer into the AUX area. Thomas now completed the
related perf work to interpret and process these AUX data.
If people are more interested in the sampling facility, they can have a
look into:
- The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05
http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a
and to learn how-to use it for Linux on Z, have look at chapter 54,
"Using the CPU-measurement facilities" in the:
- Device Drivers, Features, and Commands, SC33-8411-34
http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf
=============================================================================
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-02 14:46:20 +07:00
|
|
|
return 0;
|
|
|
|
|
2018-08-02 14:46:22 +07:00
|
|
|
err_free_queues:
|
|
|
|
auxtrace_queues__free(&sf->queues);
|
|
|
|
session->auxtrace = NULL;
|
perf auxtrace: Support for perf report -D for s390
Add initial support for s390 auxiliary traces using the CPU-Measurement
Sampling Facility.
Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data
file. Later patches will show the contents of the auxiliary traces.
Setup the auxtrace queues and data structures for s390. A raw dump of
the perf.data file now does not show an error when an auxtrace event is
encountered.
Output before:
[root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace
0x128 [0x10]: failed to process type: 70
Error:
failed to process sample
0x128 [0x10]: event: 70
.
. ... raw event: size 16 bytes
. 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............
0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0
[root@s35lp76 perf]#
Output after:
# ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE
0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
....
Additional notes about the underlying hardware and software
implementation, provided by Hendrik Brueckner (see Link: below).
=============================================================================
The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain
performance information on the mainframe. Basically, it was introduced
with System z10 years ago for the z/Architecture, that means, 64-bit.
For Linux, there are two facilities of interest, counter facility and sampling
facility. The counter facility provides hardware counters for instructions,
cycles, crypto-activities, and many more.
The sampling facility is a hardware sampler that when started will write
samples at a particular interval into a sampling buffer. At some point,
for example, if a sample block is full, it generates an interrupt to collect
samples (while the sampler continues to run).
Few years ago, I started to provide the a perf PMU to use the counter
and sampling facilities. Recently, the device driver was updated to also
"export" the sampling buffer into the AUX area. Thomas now completed the
related perf work to interpret and process these AUX data.
If people are more interested in the sampling facility, they can have a
look into:
- The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05
http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a
and to learn how-to use it for Linux on Z, have look at chapter 54,
"Using the CPU-measurement facilities" in the:
- Device Drivers, Features, and Commands, SC33-8411-34
http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf
=============================================================================
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-02 14:46:20 +07:00
|
|
|
err_free:
|
2019-07-04 22:06:20 +07:00
|
|
|
zfree(&sf->logdir);
|
perf auxtrace: Support for perf report -D for s390
Add initial support for s390 auxiliary traces using the CPU-Measurement
Sampling Facility.
Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data
file. Later patches will show the contents of the auxiliary traces.
Setup the auxtrace queues and data structures for s390. A raw dump of
the perf.data file now does not show an error when an auxtrace event is
encountered.
Output before:
[root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace
0x128 [0x10]: failed to process type: 70
Error:
failed to process sample
0x128 [0x10]: event: 70
.
. ... raw event: size 16 bytes
. 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............
0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0
[root@s35lp76 perf]#
Output after:
# ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE
0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5
0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000
offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4
....
Additional notes about the underlying hardware and software
implementation, provided by Hendrik Brueckner (see Link: below).
=============================================================================
The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain
performance information on the mainframe. Basically, it was introduced
with System z10 years ago for the z/Architecture, that means, 64-bit.
For Linux, there are two facilities of interest, counter facility and sampling
facility. The counter facility provides hardware counters for instructions,
cycles, crypto-activities, and many more.
The sampling facility is a hardware sampler that when started will write
samples at a particular interval into a sampling buffer. At some point,
for example, if a sample block is full, it generates an interrupt to collect
samples (while the sampler continues to run).
Few years ago, I started to provide the a perf PMU to use the counter
and sampling facilities. Recently, the device driver was updated to also
"export" the sampling buffer into the AUX area. Thomas now completed the
related perf work to interpret and process these AUX data.
If people are more interested in the sampling facility, they can have a
look into:
- The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05
http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a
and to learn how-to use it for Linux on Z, have look at chapter 54,
"Using the CPU-measurement facilities" in the:
- Device Drivers, Features, and Commands, SC33-8411-34
http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf
=============================================================================
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180803100758.GA28475@linux.ibm.com
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180802074622.13641-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-08-02 14:46:20 +07:00
|
|
|
free(sf);
|
|
|
|
return err;
|
|
|
|
}
|